jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

bump to head

Browse Source
This commit is contained in:
InsanityAutomation
2019-01-10 17:27:08 -05:00
parent baba7b6109
commit b9cc802ff6
77 changed files with 551 additions and 333 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+1 -1
View File
@@ -6,7 +6,7 @@
// Enable this is you have a raptor 2.
// Selects pin file, runout sensor and stock TMC Drivers automatically
//#define RAPTOR2
#define RAPTOR2
/**
* Enable if you replace the stepper drivers with TMC 2208. Be sure to remove MS3 jumper
Marlin/Makefile
+18
View File
@@ -204,6 +204,16 @@ else ifeq ($(HARDWARE_MOTHERBOARD),68)
else ifeq ($(HARDWARE_MOTHERBOARD),72)
# Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),80)
# Raise3D Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),333)
# Formbot T-Rex 2 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),95)
# Formbot T-Rex 3
else ifeq ($(HARDWARE_MOTHERBOARD),96)
# Formbot Raptor
else ifeq ($(HARDWARE_MOTHERBOARD),97)
# Formbot Raptor 2
else ifeq ($(HARDWARE_MOTHERBOARD),98)
# bq ZUM Mega 3D
else ifeq ($(HARDWARE_MOTHERBOARD),503)
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
@@ -214,6 +224,14 @@ else ifeq ($(HARDWARE_MOTHERBOARD),343)
else ifeq ($(HARDWARE_MOTHERBOARD),443)
# Creality: Ender-4, CR-8
else ifeq ($(HARDWARE_MOTHERBOARD),243)
# Creality: CR10S, CR20, CR-X
else ifeq ($(HARDWARE_MOTHERBOARD),244)
# Fysetc F6
else ifeq ($(HARDWARE_MOTHERBOARD),541)
# Duplicator i3 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),31)
# VORON
else ifeq ($(HARDWARE_MOTHERBOARD),441)
#
# Other ATmega1280, ATmega2560
Marlin/src/config/default/Configuration_adv.h
+7 -5
View File
@@ -1706,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1966,5 +1961,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+7 -5
View File
@@ -1704,11 +1704,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1964,5 +1959,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/ArmEd/Configuration_adv.h
+7 -5
View File
@@ -1679,11 +1679,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1939,5 +1934,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+7 -5
View File
@@ -1704,11 +1704,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1964,5 +1959,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+7 -5
View File
@@ -1713,11 +1713,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1973,5 +1968,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Cartesio/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+7 -5
View File
@@ -1708,11 +1708,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1968,5 +1963,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Felix/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1973,5 +1968,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1969,5 +1964,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+7 -5
View File
@@ -1710,11 +1710,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1980,5 +1975,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+7 -5
View File
@@ -1710,11 +1710,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1975,5 +1970,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+7 -5
View File
@@ -1706,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1951,5 +1946,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/MakerParts/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
+7 -5
View File
@@ -1706,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1966,5 +1961,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+7 -5
View File
@@ -1713,11 +1713,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1973,5 +1968,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/RigidBot/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/SCARA/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/TheBorg/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
+7 -5
View File
@@ -1706,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1966,5 +1961,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/VORONDesign/Configuration_adv.h
+14 -5
View File
@@ -596,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
// Play a beep when the feedrate is changed from the Status Screen
//#define BEEP_ON_FEEDRATE_CHANGE
#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
#define FEEDRATE_CHANGE_BEEP_DURATION 10
#define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
#endif
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1699,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1959,5 +1961,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+7 -5
View File
@@ -1718,11 +1718,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1978,5 +1973,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+7 -5
View File
@@ -1680,11 +1680,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1940,5 +1935,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1955,5 +1950,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/generic/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+7 -5
View File
@@ -1707,11 +1707,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1967,5 +1962,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/makibox/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+7 -5
View File
@@ -1705,11 +1705,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1965,5 +1960,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/config/examples/wt150/Configuration_adv.h
+7 -5
View File
@@ -1706,11 +1706,6 @@
*/
//#define CNC_COORDINATE_SYSTEMS
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
/**
* Auto-report temperatures with M155 S<seconds>
*/
@@ -1966,5 +1961,12 @@
#define WIFI_PWD "Wifi Password"
#endif
// @section develop
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/gcode/gcode.cpp
+1 -1
View File
@@ -336,7 +336,7 @@ void GcodeSuite::process_parsed_command(
case 49: M49(); break; // M49: Turn on or off G26 debug flag for verbose output
#endif
#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI))
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
case 73: M73(); break; // M73: Set progress percentage (for display on LCD)
#endif
Marlin/src/gcode/gcode.h
+1 -1
View File
@@ -488,7 +488,7 @@ private:
static void M49();
#endif
#if ENABLED(LCD_SET_PROGRESS_MANUALLY) && (ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI))
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
static void M73();
#endif
Marlin/src/gcode/temperature/M106_M107.cpp
+1 -1
View File
@@ -47,7 +47,7 @@
* 3-255 = Set the speed for use with T2
*/
void GcodeSuite::M106() {
const uint8_t p = parser.byteval('P', active_extruder);
const uint8_t p = parser.byteval('P', MIN(active_extruder, FAN_COUNT - 1));
if (p < MIN(EXTRUDERS, FAN_COUNT)) {
uint16_t s = parser.ushortval('S', 255);
Marlin/src/inc/Version.h
+2 -2
View File
@@ -40,7 +40,7 @@
/**
* Marlin release version identifier
*/
#define SHORT_BUILD_VERSION "2.0.x_R6"
#define SHORT_BUILD_VERSION "2.0.x_R7"
/**
* Verbose version identifier which should contain a reference to the location
@@ -53,7 +53,7 @@
* here we define this default string as the date where the latest release
* version was tagged.
*/
#define STRING_DISTRIBUTION_DATE "2019-01-05"
#define STRING_DISTRIBUTION_DATE "2019-01-10"
/**
* Required minimum Configuration.h and Configuration_adv.h file versions.
Marlin/src/lcd/extensible_ui/ui_api.cpp
+1 -1
View File
@@ -451,7 +451,7 @@ namespace ExtUI {
void setZOffset_mm(const float value) {
const float diff = (value - getZOffset_mm()) / planner.steps_to_mm[Z_AXIS];
addZOffset_steps(diff > 0 ? ceil(diff) : floor(diff));
addZOffset_steps(diff > 0 ? CEIL(diff) : FLOOR(diff));
}
void addZOffset_steps(int16_t babystep_increment) {
Marlin/src/lcd/menu/menu_sdcard.cpp
+1 -1
View File
@@ -114,7 +114,7 @@ void menu_sdcard() {
else if (card.flag.cardOK)
MENU_ITEM(function, LCD_STR_FOLDER "..", lcd_sd_updir);
for (uint16_t i = 0; i < fileCnt; i++) {
if (ui.should_draw()) for (uint16_t i = 0; i < fileCnt; i++) {
if (_menuLineNr == _thisItemNr) {
const uint16_t nr =
#if ENABLED(SDCARD_RATHERRECENTFIRST) && DISABLED(SDCARD_SORT_ALPHA)
Marlin/src/lcd/ultralcd.cpp
+4 -1
View File
@@ -709,7 +709,10 @@ void MarlinUI::update() {
}
else {
card.release();
if (old_sd_status != 2) set_status_P(PSTR(MSG_SD_REMOVED));
if (old_sd_status != 2) {
set_status_P(PSTR(MSG_SD_REMOVED));
if (!on_status_screen()) return_to_status();
}
}
refresh();
README.md
+8 -6
View File
@@ -20,7 +20,7 @@ Download earlier versions of Marlin on the [Releases page](https://github.com/Ma
## Building Marlin 2.0
To build Marlin 2.0 you'll need [Arduino IDE 1.9](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). We've posted detailed instructions on how to [build Marlin 2.0 for ARM](http://marlinfw.org/docs/basics/install_arm.html).
To build Marlin 2.0 you'll need [Arduino IDE 1.9](https://www.arduino.cc/en/main/software) or [PlatformIO](http://docs.platformio.org/en/latest/ide.html#platformio-ide). We've posted detailed instructions on how to [build Marlin 2.0 for ARM](http://marlinfw.org/docs/basics/install_rearm.html).
## Hardware Abstraction Layer (HAL)
@@ -60,11 +60,13 @@ Proposed patches should be submitted as a Pull Request against the ([bugfix-2.0.
## Credits
The current Marlin dev team consists of:
- Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - English
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - English
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - English
- Chris Pepper [[@p3p](https://github.com/p3p)] - English
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Portuguese, English
- Scott Lahteine [[@thinkyhead](https://github.com/thinkyhead)] - USA &nbsp; [![Flattr Scott](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=thinkhead&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
- Roxanne Neufeld [[@Roxy-3D](https://github.com/Roxy-3D)] - USA
- Bob Kuhn [[@Bob-the-Kuhn](https://github.com/Bob-the-Kuhn)] - USA
- Chris Pepper [[@p3p](https://github.com/p3p)] - UK
- João Brazio [[@jbrazio](https://github.com/jbrazio)] - Brazil
- Erik van der Zalm [[@ErikZalm](https://github.com/ErikZalm)] - Netherlands &nbsp; [![Flattr Erik](http://api.flattr.com/button/flattr-badge-large.png)](https://flattr.com/submit/auto?user_id=ErikZalm&url=https://github.com/MarlinFirmware/Marlin&title=Marlin&language=&tags=github&category=software)
## License
buildroot/share/PlatformIO/ldscripts/mks_robin.ld
+14
View File
@@ -0,0 +1,14 @@
MEMORY
{
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K
}
/* Provide memory region aliases for common.inc */
REGION_ALIAS("REGION_TEXT", rom);
REGION_ALIAS("REGION_DATA", ram);
REGION_ALIAS("REGION_BSS", ram);
REGION_ALIAS("REGION_RODATA", rom);
/* Let common.inc handle the real work. */
INCLUDE common.inc
buildroot/share/PlatformIO/scripts/mks_robin.py
+28
View File
@@ -0,0 +1,28 @@
Import("env")
# Relocate firmware from 0x08000000 to 0x08007000
env['CPPDEFINES'].remove(("VECT_TAB_ADDR", 134217728))
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
env.Replace(LDSCRIPT_PATH="buildroot/share/PlatformIO/ldscripts/mks_robin.ld")
# Encrypt ${PROGNAME}.bin and save it as 'Robin.bin'
def encrypt(source, target, env):
import os
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
firmware = open(target[0].path, "rb")
robin = open(target[0].dir.path +'/Robin.bin', "wb")
length = os.path.getsize(target[0].path)
position = 0
try:
while position < length:
byte = firmware.read(1)
if position >= 320 and position < 31040:
byte = chr(ord(byte) ^ key[position & 31])
robin.write(byte)
position += 1
finally:
firmware.close()
robin.close()
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
buildroot/share/tests/DUE_tests
+1 -1
View File
@@ -32,5 +32,5 @@ restore_configs
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
opt_set EXTRUDERS 2
opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE
exec_test $1 $2 "Test RAMPS4DUE with SWITCHING_EXTRUDER"
platformio.ini
+22 -2
View File
@@ -252,7 +252,7 @@ monitor_speed = 250000
platform = ststm32@<4.4.0
framework = arduino
board = genericSTM32F103RE
build_flags = !python Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags}
lib_deps = ${common.lib_deps}
lib_ignore = U8glib-HAL
@@ -293,6 +293,26 @@ lib_ignore = Adafruit NeoPixel, c1921b4
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F4>
monitor_speed = 250000
#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform = ststm32
framework = arduino
board = genericSTM32F103ZE
extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py
${common.build_flags}
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
lib_deps = ${common.lib_deps}
lib_ignore = c1921b4
libf3c
lib066
Adafruit NeoPixel_ID28
Adafruit NeoPixel
libf3e
TMC26XStepper
#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
@@ -310,7 +330,7 @@ monitor_speed = 250000
platform = ststm32
framework = arduino
board = malyanM200
build_flags = !python Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
build_flags = !python Marlin/src/HAL/HAL_STM32F1/STM32F1_flag_script.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
src_filter = ${common.default_src_filter} +<src/HAL/HAL_STM32F1>
#-<frameworks>
lib_ignore =