jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Bump to head

Browse Source
This commit is contained in:
InsanityAutomation
2019-01-16 10:59:26 -05:00
parent b9cc802ff6
commit ef4c302898
259 changed files with 14431 additions and 1746 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration_adv.h
+2
View File
@@ -77,6 +77,8 @@
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
#define THERMAL_PROTECTION_PERIOD 210 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
Marlin/src/HAL/HAL_DUE/usb/sd_mmc_spi_mem.cpp
+5 -5
View File
@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init(void) {
}
Ctrl_status sd_mmc_spi_test_unit_ready(void) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
return CTRL_NO_PRESENT;
return CTRL_GOOD;
}
@@ -27,7 +27,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready(void) {
// NOTE: This function is defined as returning the address of the last block
// in the card, which is cardSize() - 1
Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
return CTRL_NO_PRESENT;
*nb_sector = card.getSd2Card().cardSize() - 1;
return CTRL_GOOD;
@@ -42,7 +42,7 @@ bool sd_mmc_spi_wr_protect(void) {
}
bool sd_mmc_spi_removal(void) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
return true;
return false;
}
@@ -61,7 +61,7 @@ uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
// #define DEBUG_MMC
Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
return CTRL_NO_PRESENT;
#ifdef DEBUG_MMC
@@ -95,7 +95,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
}
Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isDetected())
return CTRL_NO_PRESENT;
#ifdef DEBUG_MMC
Marlin/src/HAL/HAL_LPC1768/main.cpp
+1 -1
View File
@@ -106,7 +106,7 @@ void HAL_idletask(void) {
// the disk if Marlin has it mounted. Unfortuately there is currently no way
// to unmount the disk from the LCD menu.
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
if (card.flag.cardOK)
if (card.isDetected())
MSC_Aquire_Lock();
else
MSC_Release_Lock();
Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py
+74 -81
View File
@@ -10,18 +10,16 @@ target_drive = "REARM"
import os
import platform
current_OS = platform.system()
Import("env")
#env_vars = subprocess.check_output('platformio run -t envdump')
#env_vars = env_vars.split('\n')
#for env in env_vars:
# print env
#exit(0)
build_type = os.environ.get("BUILD_TYPE", 'Not Set')
if build_type == 'upload' or build_type == 'traceback' or build_type == 'Not Set' :
def detect_error(e):
print '\nUnable to find destination disk (' + e + ')\n' \
'Please select it in platformio.ini using the upload_port keyword ' \
'(https://docs.platformio.org/en/latest/projectconf/section_env_upload.html)\n' \
'or copy the firmware (.pioenvs/' + env.get('PIOENV') + '/firmware.bin) manually to the appropriate disk\n'
try:
if current_OS == 'Windows':
#
# platformio.ini will accept this for a Windows upload port designation: 'upload_port = L:'
# Windows - doesn't care about the disk's name, only cares about the drive letter
@@ -30,119 +28,114 @@ if build_type == 'upload' or build_type == 'traceback' or build_type == 'Not Set
#
# get all drives on this computer
#
import subprocess
driveStr = subprocess.check_output("fsutil fsinfo drives") # typical result (string): 'Drives: C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
driveStr = driveStr.strip().lstrip('Drives: ') # typical result (string): 'C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
drives = driveStr.split() # typical result (array of stings): ['C:\\', 'D:\\', 'E:\\', 'F:\\', 'G:\\', 'H:\\', 'I:\\', 'J:\\', 'K:\\', 'L:\\', 'M:\\', 'Y:\\', 'Z:\\']
# typical result (string): 'Drives: C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
driveStr = subprocess.check_output("fsutil fsinfo drives")
# typical result (string): 'C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
driveStr = driveStr.strip().lstrip('Drives: ')
# typical result (array of stings): ['C:\\', 'D:\\', 'E:\\', 'F:\\',
# 'G:\\', 'H:\\', 'I:\\', 'J:\\', 'K:\\', 'L:\\', 'M:\\', 'Y:\\', 'Z:\\']
drives = driveStr.split()
upload_disk = 'Disk not found'
target_file_found = False
target_drive_found = False
for drive in drives:
final_drive_name = drive.strip().rstrip('\\') # typical result (string): 'C:'
try:
volume_info = subprocess.check_output('cmd /C dir ' + final_drive_name, stderr=subprocess.STDOUT)
except Exception as e:
continue
else:
if target_drive in volume_info and target_file_found == False: # set upload if not found target file yet
target_drive_found = True
upload_disk = final_drive_name
if target_filename in volume_info:
if target_file_found == False:
upload_disk = final_drive_name
target_file_found = True
final_drive_name = drive.strip().rstrip('\\') # typical result (string): 'C:'
try:
volume_info = subprocess.check_output('cmd /C dir ' + final_drive_name, stderr=subprocess.STDOUT)
except Exception as e:
continue
else:
if target_drive in volume_info and target_file_found == False: # set upload if not found target file yet
target_drive_found = True
upload_disk = final_drive_name
if target_filename in volume_info:
if target_file_found == False:
upload_disk = final_drive_name
target_file_found = True
#
# set upload_port to drive if found
#
if target_file_found == True or target_drive_found == True:
Import("env")
env.Replace(
UPLOAD_PORT = upload_disk
)
print 'upload disk: ' , upload_disk
env.Replace(
UPLOAD_PORT=upload_disk
)
print 'upload disk: ', upload_disk
else:
print '\nUnable to find destination disk. File must be copied manually. \n'
if current_OS == 'Linux':
detect_error('Autodetect Error')
elif current_OS == 'Linux':
#
# platformio.ini will accept this for a Linux upload port designation: 'upload_port = /media/media_name/drive'
#
upload_disk = 'Disk not found'
target_file_found = False
target_drive_found = False
medias = os.listdir('/media') #
for media in medias:
drives = os.listdir('/media/' + media) #
if target_drive in drives and target_file_found == False: # set upload if not found target file yet
target_drive_found = True
upload_disk = '/media/' + media + '/' + target_drive + '/'
for drive in drives:
try:
files = os.listdir('/media/' + media + '/' + drive )
except:
continue
else:
if target_filename in files:
if target_file_found == False:
upload_disk = '/media/' + media + '/' + drive + '/'
target_file_found = True
drives = os.listdir('/media/' + media) #
if target_drive in drives and target_file_found == False: # set upload if not found target file yet
target_drive_found = True
upload_disk = '/media/' + media + '/' + target_drive + '/'
for drive in drives:
try:
files = os.listdir('/media/' + media + '/' + drive)
except:
continue
else:
if target_filename in files:
if target_file_found == False:
upload_disk = '/media/' + media + '/' + drive + '/'
target_file_found = True
#
# set upload_port to drive if found
#
if target_file_found == True or target_drive_found == True:
Import("env")
env.Replace(
UPLOAD_FLAGS = "-P$UPLOAD_PORT",
UPLOAD_PORT = upload_disk
)
print 'upload disk: ' , upload_disk
env.Replace(
UPLOAD_FLAGS="-P$UPLOAD_PORT",
UPLOAD_PORT=upload_disk
)
print 'upload disk: ', upload_disk
else:
print '\nUnable to find destination disk. File must be copied manually. \n'
if current_OS == 'Darwin': # MAC
detect_error('Autodetect Error')
elif current_OS == 'Darwin': # MAC
#
# platformio.ini will accept this for a OSX upload port designation: 'upload_port = /media/media_name/drive'
#
import os
upload_disk = 'Disk not found'
drives = os.listdir('/Volumes') # human readable names
drives = os.listdir('/Volumes') # human readable names
target_file_found = False
target_drive_found = False
if target_drive in drives and target_file_found == False: # set upload if not found target file yet
target_drive_found = True
upload_disk = '/Volumes/' + target_drive + '/'
target_drive_found = True
upload_disk = '/Volumes/' + target_drive + '/'
for drive in drives:
try:
filenames = os.listdir('/Volumes/' + drive + '/') # will get an error if the drive is protected
except:
continue
else:
if target_filename in filenames:
if target_file_found == False:
upload_disk = '/Volumes/' + drive + '/'
target_file_found = True
try:
filenames = os.listdir('/Volumes/' + drive + '/') # will get an error if the drive is protected
except:
continue
else:
if target_filename in filenames:
if target_file_found == False:
upload_disk = '/Volumes/' + drive + '/'
target_file_found = True
#
# set upload_port to drive if found
#
if target_file_found == True or target_drive_found == True:
Import("env")
env.Replace(
UPLOAD_PORT = upload_disk
)
print '\nupload disk: ' , upload_disk, '\n'
env.Replace(
UPLOAD_PORT=upload_disk
)
print '\nupload disk: ', upload_disk, '\n'
else:
print '\nUnable to find destination disk. File must be copied manually. \n'
detect_error('Autodetect Error')
except Exception as e:
detect_error(str(e))
Marlin/src/HAL/HAL_STM32/HAL.h
+1 -7
View File
@@ -24,10 +24,6 @@
#define CPU_32_BIT
#ifndef vsnprintf_P
#define vsnprintf_P vsnprintf
#endif
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
@@ -105,8 +101,6 @@
#define NUM_SERIAL 1
#endif
#define _BV(b) (1 << (b))
/**
* TODO: review this to return 1 for pins that are not analog input
*/
@@ -177,7 +171,7 @@ void _delay_ms(const int delay);
extern "C" char* _sbrk(int incr);
static int freeMemory() {
static inline int freeMemory() {
volatile char top;
return &top - reinterpret_cast<char*>(_sbrk(0));
}
Marlin/src/HAL/HAL_STM32/HAL_spi_STM32.cpp
+4 -4
View File
@@ -116,10 +116,9 @@ uint8_t spiRec(void) {
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
if (nbyte == 0) return;
memset(buf, 0xFF, nbyte);
SPI.beginTransaction(spiConfig);
for (int i = 0; i < nbyte; i++) {
buf[i] = SPI.transfer(0xFF);
}
SPI.transfer(buf, nbyte);
SPI.endTransaction();
}
@@ -145,9 +144,10 @@ void spiSend(uint8_t b) {
* @details Use DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
uint8_t rxBuf[512];
SPI.beginTransaction(spiConfig);
SPI.transfer(token);
SPI.transfer((uint8_t*)buf, (uint8_t*)0, 512);
SPI.transfer((uint8_t*)buf, &rxBuf, 512);
SPI.endTransaction();
}
Marlin/src/HAL/HAL_STM32/HAL_timers_STM32.h
+1
View File
@@ -26,6 +26,7 @@
// --------------------------------------------------------------------------
#include <stdint.h>
#include "../../inc/MarlinConfig.h"
// --------------------------------------------------------------------------
// Defines
Marlin/src/HAL/HAL_STM32/fastio_STM32.h
-1
View File
@@ -43,7 +43,6 @@ void FastIO_init(); // Must be called before using fast io macros
// Defines
// --------------------------------------------------------------------------
#define _BV(b) (1 << (b))
#define _BV32(b) (1UL << (b))
#if defined(STM32F0xx) || defined(STM32F1xx) || defined(STM32F3xx) || defined(STM32L0xx) || defined(STM32L4xx)
Marlin/src/HAL/HAL_STM32F1/HAL.cpp
+1 -1
View File
@@ -100,7 +100,7 @@ uint16_t HAL_adc_result;
// --------------------------------------------------------------------------
STM32ADC adc(ADC1);
uint8 adc_pins[] = {
uint8_t adc_pins[] = {
#if HAS_TEMP_ADC_0
TEMP_0_PIN,
#endif
Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
+7 -7
View File
@@ -52,14 +52,14 @@ uint8_t ServoCount; //=0
#define TAU_USEC (TAU_MSEC * 1000)
#define TAU_CYC (TAU_MSEC * CYC_MSEC)
#define SERVO_PRESCALER (TAU_CYC / MAX_OVERFLOW + 1)
#define SERVO_OVERFLOW ((uint16)round((double)TAU_CYC / SERVO_PRESCALER))
#define SERVO_OVERFLOW ((uint16_t)round((double)TAU_CYC / SERVO_PRESCALER))
// Unit conversions
#define US_TO_COMPARE(us) ((uint16)map((us), 0, TAU_USEC, 0, SERVO_OVERFLOW))
#define COMPARE_TO_US(c) ((uint32)map((c), 0, SERVO_OVERFLOW, 0, TAU_USEC))
#define ANGLE_TO_US(a) ((uint16)(map((a), this->minAngle, this->maxAngle, \
#define US_TO_COMPARE(us) ((uint16_t)map((us), 0, TAU_USEC, 0, SERVO_OVERFLOW))
#define COMPARE_TO_US(c) ((uint32_t)map((c), 0, SERVO_OVERFLOW, 0, TAU_USEC))
#define ANGLE_TO_US(a) ((uint16_t)(map((a), this->minAngle, this->maxAngle, \
SERVO_DEFAULT_MIN_PW, SERVO_DEFAULT_MAX_PW)))
#define US_TO_ANGLE(us) ((int16)(map((us), SERVO_DEFAULT_MIN_PW, SERVO_DEFAULT_MAX_PW, \
#define US_TO_ANGLE(us) ((int16_t)(map((us), SERVO_DEFAULT_MIN_PW, SERVO_DEFAULT_MAX_PW, \
this->minAngle, this->maxAngle)))
libServo::libServo() {
@@ -74,7 +74,7 @@ bool libServo::attach(const int32_t pin, const int32_t minAngle, const int32_t m
this->maxAngle = maxAngle;
timer_dev *tdev = PIN_MAP[this->pin].timer_device;
uint8 tchan = PIN_MAP[this->pin].timer_channel;
uint8_t tchan = PIN_MAP[this->pin].timer_channel;
pinMode(this->pin, PWM);
pwmWrite(this->pin, 0);
@@ -97,7 +97,7 @@ bool libServo::detach() {
int32_t libServo::read() const {
if (this->attached()) {
timer_dev *tdev = PIN_MAP[this->pin].timer_device;
uint8 tchan = PIN_MAP[this->pin].timer_channel;
uint8_t tchan = PIN_MAP[this->pin].timer_channel;
return US_TO_ANGLE(COMPARE_TO_US(timer_get_compare(tdev, tchan)));
}
return 0;
Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.cpp
+1 -1
View File
@@ -138,7 +138,7 @@ bool SDIO_WriteBlock(uint32_t blockAddress, const uint8_t *data) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
uint32 timeout = millis() + SDIO_WRITE_TIMEOUT;
uint32_t timeout = millis() + SDIO_WRITE_TIMEOUT;
while (timeout > millis()) {
if (SDIO_GetCardState() == SDIO_CARD_TRANSFER) {
return true;
Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
+2 -2
View File
@@ -133,7 +133,7 @@ uint8_t spiRec(void) {
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.dmaTransfer(0, const_cast<uint8*>(buf), nbyte);
SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
SPI.endTransaction();
}
@@ -161,7 +161,7 @@ void spiSend(uint8_t b) {
void spiSendBlock(uint8_t token, const uint8_t* buf) {
SPI.beginTransaction(spiConfig);
SPI.send(token);
SPI.dmaSend(const_cast<uint8*>(buf), 512);
SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
SPI.endTransaction();
}
Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
+3 -3
View File
@@ -119,7 +119,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
case STEP_TIMER_NUM:
timer_pause(STEP_TIMER_DEV);
timer_set_count(STEP_TIMER_DEV, 0);
timer_set_prescaler(STEP_TIMER_DEV, (uint16)(STEPPER_TIMER_PRESCALE - 1));
timer_set_prescaler(STEP_TIMER_DEV, (uint16_t)(STEPPER_TIMER_PRESCALE - 1));
timer_set_reload(STEP_TIMER_DEV, 0xFFFF);
timer_set_compare(STEP_TIMER_DEV, STEP_TIMER_CHAN, MIN(HAL_TIMER_TYPE_MAX, (STEPPER_TIMER_RATE / frequency)));
timer_attach_interrupt(STEP_TIMER_DEV, STEP_TIMER_CHAN, stepTC_Handler);
@@ -130,7 +130,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
case TEMP_TIMER_NUM:
timer_pause(TEMP_TIMER_DEV);
timer_set_count(TEMP_TIMER_DEV, 0);
timer_set_prescaler(TEMP_TIMER_DEV, (uint16)(TEMP_TIMER_PRESCALE - 1));
timer_set_prescaler(TEMP_TIMER_DEV, (uint16_t)(TEMP_TIMER_PRESCALE - 1));
timer_set_reload(TEMP_TIMER_DEV, 0xFFFF);
timer_set_compare(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, MIN(HAL_TIMER_TYPE_MAX, ((F_CPU / TEMP_TIMER_PRESCALE) / frequency)));
timer_attach_interrupt(TEMP_TIMER_DEV, TEMP_TIMER_CHAN, tempTC_Handler);
@@ -157,7 +157,7 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
}
}
static inline bool timer_irq_enabled(const timer_dev * const dev, const uint8 interrupt) {
static inline bool timer_irq_enabled(const timer_dev * const dev, const uint8_t interrupt) {
return bool(*bb_perip(&(dev->regs).adv->DIER, interrupt));
}
Marlin/src/HAL/HAL_STM32F1/persistent_store_sdcard.cpp
+2 -2
View File
@@ -41,7 +41,7 @@ char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
char eeprom_filename[] = "eeprom.dat";
bool PersistentStore::access_start() {
if (!card.flag.cardOK) return false;
if (!card.isDetected()) return false;
int16_t bytes_read = 0;
constexpr char eeprom_zero = 0xFF;
card.openFile(eeprom_filename, true);
@@ -54,7 +54,7 @@ bool PersistentStore::access_start() {
}
bool PersistentStore::access_finish() {
if (!card.flag.cardOK) return false;
if (!card.isDetected()) return false;
card.openFile(eeprom_filename, true);
int16_t bytes_written = card.write(HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
card.closefile();
Marlin/src/HAL/HAL_STM32F7/TMC2660.cpp
+20 -43
View File
@@ -127,7 +127,7 @@ uint8_t current_scaling = 0;
* dir_pin - the pin where the direction pin is connected
* step_pin - the pin where the step pin is connected
*/
TMC26XStepper::TMC26XStepper(int16_t number_of_steps, int16_t cs_pin, int16_t dir_pin, int16_t step_pin, uint16_t current, uint16_t resistor) {
TMC26XStepper::TMC26XStepper(const int16_t in_steps, int16_t cs_pin, int16_t dir_pin, int16_t step_pin, uint16_t current, uint16_t resistor) {
// We are not started yet
started = false;
@@ -165,7 +165,7 @@ TMC26XStepper::TMC26XStepper(int16_t number_of_steps, int16_t cs_pin, int16_t di
// Set a nice microstepping value
setMicrosteps(DEFAULT_MICROSTEPPING_VALUE);
// Save the number of steps
this->number_of_steps = number_of_steps;
number_of_steps = in_steps;
}
@@ -389,52 +389,29 @@ char TMC26XStepper::getStallGuardFilter(void) {
* any value in between will be mapped to the next smaller value
* 0 and 1 set the motor in full step mode
*/
void TMC26XStepper::setMicrosteps(int16_t number_of_steps) {
long setting_pattern;
//poor mans log
if (number_of_steps >= 256) {
setting_pattern = 0;
microsteps = 256;
}
else if (number_of_steps >= 128) {
setting_pattern = 1;
microsteps = 128;
}
else if (number_of_steps >= 64) {
setting_pattern = 2;
microsteps = 64;
}
else if (number_of_steps >= 32) {
setting_pattern = 3;
microsteps = 32;
}
else if (number_of_steps >= 16) {
setting_pattern = 4;
microsteps = 16;
}
else if (number_of_steps >= 8) {
setting_pattern = 5;
microsteps = 8;
}
else if (number_of_steps >= 4) {
setting_pattern = 6;
microsteps = 4;
}
else if (number_of_steps >= 2) {
setting_pattern = 7;
microsteps = 2;
//1 and 0 lead to full step
}
else if (number_of_steps <= 1) {
setting_pattern = 8;
microsteps = 1;
}
void TMC26XStepper::setMicrosteps(const int16_t in_steps) {
uint16_t setting_pattern;
if (in_steps >= 256) setting_pattern = 0;
else if (in_steps >= 128) setting_pattern = 1;
else if (in_steps >= 64) setting_pattern = 2;
else if (in_steps >= 32) setting_pattern = 3;
else if (in_steps >= 16) setting_pattern = 4;
else if (in_steps >= 8) setting_pattern = 5;
else if (in_steps >= 4) setting_pattern = 6;
else if (in_steps >= 2) setting_pattern = 7;
else if (in_steps <= 1) setting_pattern = 8; // 1 and 0 lead to full step
microsteps = _BV(8 - setting_pattern);
#ifdef TMC_DEBUG0 // crashes
//SERIAL_PRINTF("Microstepping: ");
SERIAL_ECHOPAIR("\n Microstepping: ", microsteps);
#endif
// Delete the old value
this->driver_control_register_value &= 0xFFFF0UL;
this->driver_control_register_value &= 0x000FFFF0UL;
// Set the new value
this->driver_control_register_value |= setting_pattern;
Marlin/src/HAL/HAL_STM32F7/TMC2660.h
+2 -2
View File
@@ -119,7 +119,7 @@ class TMC26XStepper {
* You can select a different stepping with setMicrosteps() to aa different value.
* \sa start(), setMicrosteps()
*/
TMC26XStepper(int16_t number_of_steps, int16_t cs_pin, int16_t dir_pin, int16_t step_pin, uint16_t current, uint16_t resistor=100); //resistor=150
TMC26XStepper(const int16_t in_steps, int16_t cs_pin, int16_t dir_pin, int16_t step_pin, uint16_t current, uint16_t resistor=100); //resistor=150
/*!
* \brief configures and starts the TMC26X stepper driver. Before you called this function the stepper driver is in nonfunctional mode.
@@ -163,7 +163,7 @@ class TMC26XStepper {
* If you give any other value it will be rounded to the next smaller number (3 would give a microstepping of 2).
* You can always check the current microstepping with getMicrosteps().
*/
void setMicrosteps(int16_t number_of_steps);
void setMicrosteps(const int16_t in_steps);
/*!
* \brief returns the effective current number of microsteps selected.
Marlin/src/Marlin.cpp
+6 -17
View File
@@ -164,17 +164,6 @@ bool Running = true;
TempUnit input_temp_units = TEMPUNIT_C;
#endif
#if FAN_COUNT > 0
uint8_t fan_speed[FAN_COUNT] = { 0 };
#if ENABLED(EXTRA_FAN_SPEED)
uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
bool fans_paused; // = false;
uint8_t paused_fan_speed[FAN_COUNT] = { 0 };
#endif
#endif
// For M109 and M190, this flag may be cleared (by M108) to exit the wait loop
volatile bool wait_for_heatup = true;
@@ -655,7 +644,7 @@ void stop() {
print_job_timer.stop();
#if ENABLED(PROBING_FANS_OFF)
if (fans_paused) fans_pause(false); // put things back the way they were
if (thermalManager.fans_paused) thermalManager.set_fans_paused(false); // put things back the way they were
#endif
if (IsRunning()) {
@@ -820,10 +809,6 @@ void setup() {
OUT_WRITE(PHOTOGRAPH_PIN, LOW);
#endif
#if HAS_CASE_LIGHT
update_case_light();
#endif
#if ENABLED(SPINDLE_LASER_ENABLE)
OUT_WRITE(SPINDLE_LASER_ENABLE_PIN, !SPINDLE_LASER_ENABLE_INVERT); // init spindle to off
#if SPINDLE_DIR_CHANGE
@@ -884,6 +869,10 @@ void setup() {
#endif
#endif
#if HAS_CASE_LIGHT
update_case_light();
#endif
#if ENABLED(MK2_MULTIPLEXER)
SET_OUTPUT(E_MUX0_PIN);
SET_OUTPUT(E_MUX1_PIN);
@@ -976,7 +965,7 @@ void loop() {
quickstop_stepper();
print_job_timer.stop();
thermalManager.disable_all_heaters();
zero_fan_speeds();
thermalManager.zero_fan_speeds();
wait_for_heatup = false;
#if ENABLED(POWER_LOSS_RECOVERY)
card.removeJobRecoveryFile();
Marlin/src/Marlin.h
-18
View File
@@ -81,24 +81,6 @@ extern volatile bool wait_for_heatup;
// Inactivity shutdown timer
extern millis_t max_inactive_time, stepper_inactive_time;
#if FAN_COUNT > 0
extern uint8_t fan_speed[FAN_COUNT];
#if ENABLED(EXTRA_FAN_SPEED)
extern uint8_t old_fan_speed[FAN_COUNT], new_fan_speed[FAN_COUNT];
#endif
#if ENABLED(PROBING_FANS_OFF)
extern bool fans_paused;
extern uint8_t paused_fan_speed[FAN_COUNT];
#endif
#define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT)
#endif
inline void zero_fan_speeds() {
#if FAN_COUNT > 0
FANS_LOOP(i) fan_speed[i] = 0;
#endif
}
#if ENABLED(USE_CONTROLLER_FAN)
extern uint8_t controllerfan_speed;
#endif
Marlin/src/config/default/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1727,6 +1728,13 @@
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
@@ -2010,7 +2022,7 @@
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
#define PRINTER_EVENT_LEDS
#endif
Marlin/src/config/default/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1478,22 +1480,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration.h
+2083
View File
File diff suppressed because it is too large Load Diff
Marlin/src/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+1962
View File
File diff suppressed because it is too large Load Diff
Marlin/src/config/examples/3DFabXYZ/Migbot/Readme.md
+3
View File
@@ -0,0 +1,3 @@
Personalized config files for the "Electron"\"Tevo 3D" i3 6th gen
https://www.3dprintersbay.com/electron3d-reprap-prusa-i3-kit
https://reprap.org/wiki/Migbot_Prusa_i3
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+13 -1
View File
@@ -1201,6 +1201,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1742,11 +1743,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1976,6 +1984,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Anet/A2/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1958,6 +1966,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Anet/A2plus/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1958,6 +1966,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Anet/A6/Configuration.h
+13 -1
View File
@@ -1319,6 +1319,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1874,11 +1875,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -2110,6 +2118,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1476,22 +1478,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Anet/A8/Configuration.h
+13 -1
View File
@@ -1194,6 +1194,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1735,11 +1736,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1971,6 +1979,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/ArmEd/Configuration.h
+13 -1
View File
@@ -1193,6 +1193,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1734,11 +1735,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1968,6 +1976,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/ArmEd/Configuration_adv.h
+2 -16
View File
@@ -81,6 +81,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1451,22 +1453,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 45 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1476,22 +1478,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+13 -1
View File
@@ -1169,6 +1169,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1710,11 +1711,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1944,6 +1952,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1485,22 +1487,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+13 -1
View File
@@ -1169,6 +1169,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1710,11 +1711,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1944,6 +1952,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Cartesio/Configuration.h
+13 -1
View File
@@ -1180,6 +1180,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1721,11 +1722,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1955,6 +1963,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Cartesio/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/CR-10/Configuration.h
+13 -1
View File
@@ -1191,6 +1191,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1732,11 +1733,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1966,6 +1974,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+13 -1
View File
@@ -1182,6 +1182,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1723,11 +1724,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1957,6 +1965,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+13 -1
View File
@@ -1200,6 +1200,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1741,11 +1742,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1975,6 +1983,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/CR-8/Configuration.h
+13 -1
View File
@@ -1191,6 +1191,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1732,11 +1733,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1966,6 +1974,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+13 -1
View File
@@ -1185,6 +1185,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1726,11 +1727,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1960,6 +1968,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+13 -1
View File
@@ -1185,6 +1185,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1726,11 +1727,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1960,6 +1968,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+13 -1
View File
@@ -1191,6 +1191,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1732,11 +1733,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1966,6 +1974,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Einstart-S/Configuration.h
+13 -1
View File
@@ -1191,6 +1191,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1732,11 +1733,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1962,6 +1970,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Felix/Configuration.h
+13 -1
View File
@@ -1163,6 +1163,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1704,11 +1705,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1938,6 +1946,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Felix/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Felix/DUAL/Configuration.h
+13 -1
View File
@@ -1163,6 +1163,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1704,11 +1705,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1938,6 +1946,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration.h
+2044
View File
File diff suppressed because it is too large Load Diff
Marlin/src/config/examples/FlashForge/CreatorPro/Configuration_adv.h
+1972
View File
File diff suppressed because it is too large Load Diff
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+13 -1
View File
@@ -1187,6 +1187,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1728,11 +1729,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1962,6 +1970,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Formbot/Raptor/Configuration.h
+13 -1
View File
@@ -1286,6 +1286,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1827,11 +1828,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -2061,6 +2069,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 210 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1479,22 +1481,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
+13 -1
View File
@@ -1216,6 +1216,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1757,11 +1758,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1991,6 +1999,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1482,22 +1484,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+13 -1
View File
@@ -1206,6 +1206,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1750,11 +1751,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1984,6 +1992,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 60 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1482,22 +1484,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+13 -1
View File
@@ -1196,6 +1196,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1737,11 +1738,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1971,6 +1979,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
+13 -1
View File
@@ -1188,6 +1188,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1729,11 +1730,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1963,6 +1971,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1478,22 +1480,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+13 -1
View File
@@ -1197,6 +1197,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1738,11 +1739,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1972,6 +1980,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+13 -1
View File
@@ -1196,6 +1196,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1737,11 +1738,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1971,6 +1979,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+13 -1
View File
@@ -1181,6 +1181,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1722,11 +1723,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1956,6 +1964,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+13 -1
View File
@@ -1185,6 +1185,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1726,11 +1727,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1960,6 +1968,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/JGAurora/A5/Configuration.h
+13 -1
View File
@@ -1193,6 +1193,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1734,11 +1735,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1968,6 +1976,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/MakerParts/Configuration.h
+13 -1
View File
@@ -1201,6 +1201,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1742,11 +1743,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1976,6 +1984,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/MakerParts/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Malyan/M150/Configuration.h
+13 -1
View File
@@ -1209,6 +1209,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1750,11 +1751,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1984,6 +1992,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Malyan/M200/Configuration.h
+13 -1
View File
@@ -1180,6 +1180,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1721,11 +1722,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1955,6 +1963,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+2 -16
View File
@@ -77,6 +77,8 @@
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
/**
* Whenever an M104, M109, or M303 increases the target temperature, the
* firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
@@ -1477,22 +1479,6 @@
*/
//#define TMC_DEBUG
/**
* M915 Z Axis Calibration
*
* - Adjust Z stepper current,
* - Drive the Z axis to its physical maximum, and
* - Home Z to account for the lost steps.
*
* Use M915 Snn to specify the current.
* Use M925 Znn to add extra Z height to Z_MAX_POS.
*/
//#define TMC_Z_CALIBRATION
#if ENABLED(TMC_Z_CALIBRATION)
#define CALIBRATION_CURRENT 250
#define CALIBRATION_EXTRA_HEIGHT 10
#endif
/**
* You can set your own advanced settings by filling in predefined functions.
* A list of available functions can be found on the library github page
Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+13 -1
View File
@@ -1185,6 +1185,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1726,11 +1727,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1960,6 +1968,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*
Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+13 -1
View File
@@ -1185,6 +1185,7 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
@@ -1726,11 +1727,18 @@
//
//
// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// 2-wire Non-latching LCD SR from https://goo.gl/aJJ4sH
// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
//
//#define SAV_3DLCD
//
// 3-wire SR LCD with strobe using 74HC4094
// https://github.com/mikeshub/SailfishLCD
// Uses the code directly from Sailfish
//
//#define FF_INTERFACEBOARD
//=============================================================================
//======================= LCD / Controller Selection =======================
//========================= (Graphical LCDs) ========================
@@ -1960,6 +1968,10 @@
// Support for PCA9632 PWM LED driver
//#define PCA9632
// Support for PCA9533 PWM LED driver
// https://github.com/mikeshub/SailfishRGB_LED
//#define PCA9533
/**
* RGB LED / LED Strip Control
*

Some files were not shown because too many files have changed in this diff Show More