jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update Configuration_adv.h

Browse Source
This commit is contained in:
InsanityAutomation
2020-09-19 00:02:06 -04:00
parent 7d0cd9ccf5
commit f7fdbb4eb3
1 changed files with 5 additions and 26 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration_adv.h
+5 -26
View File
@@ -773,6 +773,7 @@
//
//#define ASSISTED_TRAMMING
#if ENABLED(ASSISTED_TRAMMING)
// Define positions for probing points, use the hotend as reference not the sensor.
#define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } }
@@ -785,9 +786,6 @@
// Enable to restore leveling setup after operation
#define RESTORE_LEVELING_AFTER_G35
// Add a menu item for Assisted Tramming
//#define ASSISTED_TRAMMING_MENU_ITEM
/**
* Screw thread:
* M3: 30 = Clockwise, 31 = Counter-Clockwise
@@ -795,6 +793,7 @@
* M5: 50 = Clockwise, 51 = Counter-Clockwise
*/
#define TRAMMING_SCREW_THREAD 30
#endif
// @section motion
@@ -1980,7 +1979,7 @@
* Universal tool change settings.
* Applies to all types of extruders except where explicitly noted.
*/
#if HAS_MULTI_EXTRUDER
#if EXTRUDERS > 1
// Z raise distance for tool-change, as needed for some extruders
#define TOOLCHANGE_ZRAISE 2 // (mm)
//#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT // Apply raise before swap retraction (if enabled)
@@ -2044,7 +2043,7 @@
//#define TOOLCHANGE_PARK_X_ONLY // X axis only move
//#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move
#endif
#endif // HAS_MULTI_EXTRUDER
#endif // EXTRUDERS > 1
/**
* Advanced Pause
@@ -3233,7 +3232,6 @@
//#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PROMPT_SUPPORT
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
#endif
/**
@@ -3360,26 +3358,7 @@
//#define GANTRY_CALIBRATION_SAFE_POSITION {X_CENTER, Y_CENTER} // Safe position for nozzle
//#define GANTRY_CALIBRATION_XY_PARK_FEEDRATE 3000 // XY Park Feedrate - MMM
//#define GANTRY_CALIBRATION_COMMANDS_PRE ""
#define GANTRY_CALIBRATION_COMMANDS_POST "G28" // G28 is highly recommended here as position is likely no longer accurate.
#endif
/**
* Modern replacement for the Prusa TMC_Z_CALIBRATION
* Adds capability to work with any adjustable current drivers
* Implements as G34 as M915 is deprecated
*/
//#define MECHANICAL_GANTRY_CALIBRATION
#if ENABLED(MECHANICAL_GANTRY_CALIBRATION)
#define GANTRY_CALIBRATION_CURRENT 600 // Default calibration current in ma
#define GANTRY_CALIBRATION_EXTRA_HEIGHT 15 // Extra distance in mm past Z_###_POS to move
#define GANTRY_CALIBRATION_DIRECTION 1 // Set to 1 for Max or 0 for min
#define GANTRY_CALIBRATION_FEEDRATE 500 // Feedrate for correction move
//#define GANTRY_CALIBRATION_SAFE_POSITION {X_CENTER, Y_CENTER} // Safe position for nozzle
//#define GANTRY_CALIBRATION_XY_PARK_FEEDRATE 3000 // XY Park Feedrate - MMM
//#define GANTRY_CALIBRATION_COMMANDS_PRE ""
//#define GANTRY_CALIBRATION_COMMANDS_POST "G28"
//#define GANTRY_CALIBRATION_COMMANDS_POST "G28" // G28 is highly recommended here as position is likely no longer accurate.
#endif
/**