Update from Devel branch

Update Configuration.h
Tweaks
2020-06-17 10:16:13 -04:00 · 2019-06-21 13:37:20 -04:00 · 2019-06-20 13:20:35 -04:00 · 2019-06-01 10:04:11 -04:00 · 2019-04-27 09:42:49 -04:00 · 2019-04-25 20:41:45 -04:00
1835 changed files with 78283 additions and 721916 deletions
@@ -54,9 +54,10 @@ jobs:
            generate_version ./Marlin/src/inc
            cat ./Marlin/src/inc/_Version.h
            #
-            # Back up pins_RAMPS.h
+            # Backup pins_RAMPS.h
+            #
+            cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
            #
-            backup_ramps

            env_backup

@@ -240,14 +241,14 @@ jobs:
            build_marlin_pio ./ ${TEST_PLATFORM}
            restore_configs
            echo testing STM32F1 targets...
-            export TEST_PLATFORM="-e STM32F103RE"
+            export TEST_PLATFORM="-e STM32F1"
            restore_configs
-            echo use_example_configs STM32/STM32F103RE
-            use_example_configs STM32/STM32F103RE
+            echo use_example_configs STM32F10
+            use_example_configs STM32F10
            build_marlin_pio ./ ${TEST_PLATFORM}
            restore_configs
-            echo use_example_configs STM32/stm32f103ret6
-            use_example_configs STM32/stm32f103ret6
+            echo use_example_configs stm32f103ret6
+            use_example_configs stm32f103ret6
            build_marlin_pio ./ ${TEST_PLATFORM}
            restore_configs

@@ -0,0 +1,19 @@
+# editorconfig.org
+root = true
+
+[{*.patch,syntax_test_*}]
+trim_trailing_whitespace = false
+
+[{*.c,*.cpp,*.h}]
+charset = utf-8
+
+[{*.c,*.cpp,*.h,Makefile}]
+trim_trailing_whitespace = true
+insert_final_newline = true
+end_of_line = lf
+indent_style = space
+indent_size = 2
+
+[{*.py,*.conf,*.sublime-project}]
+indent_style = tab
+indent_size = 4
@@ -1 +0,0 @@
-custom: http://www.thinkyhead.com/donate-to-marlin
@@ -1,8 +1,8 @@
 <!--

-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md

-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/.

 Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.

@@ -1,6 +1,6 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
 # Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -146,6 +146,9 @@ Marlin/*/*/readme.txt
 Marlin/*/*/*/readme.txt
 Marlin/*/*/*/*/readme.txt

+# Secure Credentials
+Configuration_Secure.h
+
 #Visual Studio
 *.sln
 *.vcxproj
@@ -1,80 +0,0 @@
-dist: bionic
-sudo: false
-
-language: python
-python:
-  - "3.7"
-
-notifications:
-  email: false
-
-env:
-  # Base Environments
-  - TEST_PLATFORM="DUE"
-  - TEST_PLATFORM="esp32"
-  - TEST_PLATFORM="linux_native"
-  - TEST_PLATFORM="LPC1768"
-  - TEST_PLATFORM="LPC1769"
-  - TEST_PLATFORM="megaatmega2560"
-  - TEST_PLATFORM="STM32F103RE"
-  - TEST_PLATFORM="teensy31"
-  - TEST_PLATFORM="teensy35"
-
-  # Extended AVR Environments
-  - TEST_PLATFORM="fysetc_f6_13"
-  - TEST_PLATFORM="megaatmega1280"
-  - TEST_PLATFORM="rambo"
-  - TEST_PLATFORM="sanguino_atmega1284p"
-  - TEST_PLATFORM="sanguino_atmega644p"
-
-  # Extended STM32 Environments
-  - TEST_PLATFORM="ARMED"
-  - TEST_PLATFORM="BIGTREE_BTT002"
-  - TEST_PLATFORM="BIGTREE_SKR_PRO"
-  - TEST_PLATFORM="STM32F103RC_bigtree"
-  - TEST_PLATFORM="jgaurora_a5s_a1"
-  - TEST_PLATFORM="STM32F103VE_longer"
-  - TEST_PLATFORM="STM32F407VE_black"
-
-  # Non-working environment tests
-  #- TEST_PLATFORM="at90usb1286_cdc"
-  #- TEST_PLATFORM="at90usb1286_dfu"
-  #- TEST_PLATFORM="STM32F103CB_malyan"
-  #- TEST_PLATFORM="mks_robin"
-  #- TEST_PLATFORM="mks_robin_lite"
-  #- TEST_PLATFORM="mks_robin_mini"
-  #- TEST_PLATFORM="mks_robin_nano"
-  #- TEST_PLATFORM="SAMD51_grandcentral_m4"
-  #- TEST_PLATFORM="STM32F103RC_bigtree"
-  #- TEST_PLATFORM="STM32F103RC_bigtree_USB"
-  #- TEST_PLATFORM="STM32F103RC_fysetc"
-  #- TEST_PLATFORM="STM32F4"
-  #- TEST_PLATFORM="STM32F7"
-
-before_install:
-  #
-  # Fetch the tag information for the current branch
-  - git fetch origin --tags
-  #
-  # Publish the buildroot script folder
-  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
-  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
-  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
-
-install:
-  #- pip install -U platformio
-  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
-
-before_script:
-  # Update PlatformIO packages
-  - platformio update
-  #
-  # Change current working directory to the build dir
-  - cd ${TRAVIS_BUILD_DIR}
-  #
-  # Generate custom version include
-  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/src/inc
-  - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
-  #
-script:
-  - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}
@@ -92,6 +92,9 @@ U8GLIB             ?= 1
 # this defines whether to include the Trinamic TMCStepper library
 TMC                ?= 1

+# this defines whether to include the AdaFruit NeoPixel library
+NEOPIXEL           ?= 0
+
 ############
 # Try to automatically determine whether RELOC_WORKAROUND is needed based
 # on GCC versions:
@@ -177,80 +180,95 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+# MKS v1.6 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS GEN v1.3 or 1.4
+
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS GEN L
+# MKS GEN v1.3 or 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# zrib V2.0 control board (Chinese knock off RAMPS replica)
+# MKS GEN L
 else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# Bigtreetech or BIQU KFB2.0
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
  MCU ?= atmega1280

 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Raise3D Rumba
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Rapide Lite RL200 Rumba
+# Raise3D Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Formbot T-Rex 2 Plus
+# Rapide Lite RL200 Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# TriGorilla Anycubic version 1.4 Rev 1.1
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# Creality: Ender-4, CR-8
+# TriGorilla Anycubic version 1.4 Rev 1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# FYSETC F6
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Duplicator i3 Plus
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# VORON
+# FYSETC F6 1.5
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# TRONXY V3 1.0
+# Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# Z-Bolt X Series
+# VORON
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# TT OSCAR
+# TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Overlord/Overlord Pro
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+# TT OSCAR
+else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+# Overlord/Overlord Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1145)
+# ADIMLab Gantry v1
+else ifeq ($(HARDWARE_MOTHERBOARD),1146)
+# ADIMLab Gantry v2
+else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+# BIQU Tango V1
+else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+# MKS GEN L V2
+else ifeq ($(HARDWARE_MOTHERBOARD),1149)
+# Copymaster 3D
+else ifeq ($(HARDWARE_MOTHERBOARD),1150)

 #
 # RAMBo and derivatives
@@ -277,42 +295,44 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1205)
 else ifeq ($(HARDWARE_MOTHERBOARD),1300)
 # Cartesio CN Controls V12
 else ifeq ($(HARDWARE_MOTHERBOARD),1301)
-# Cheaptronic v1.0
+# Cartesio CN Controls V15
 else ifeq ($(HARDWARE_MOTHERBOARD),1302)
-# Cheaptronic v2.0
+# Cheaptronic v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1303)
-# Makerbot Mightyboard Revision E
+# Cheaptronic v2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1304)
-# Megatronics
+# Makerbot Mightyboard Revision E
 else ifeq ($(HARDWARE_MOTHERBOARD),1305)
-# Megatronics v2.0
+# Megatronics
 else ifeq ($(HARDWARE_MOTHERBOARD),1306)
-# Megatronics v3.0
+# Megatronics v2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1307)
-# Megatronics v3.1
+# Megatronics v3.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1308)
-# Megatronics v3.2
+# Megatronics v3.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1309)
-# Elefu Ra Board (v3)
+# Megatronics v3.2
 else ifeq ($(HARDWARE_MOTHERBOARD),1310)
-# Leapfrog
+# Elefu Ra Board (v3)
 else ifeq ($(HARDWARE_MOTHERBOARD),1311)
-# Mega controller
+# Leapfrog
 else ifeq ($(HARDWARE_MOTHERBOARD),1312)
-# Geeetech GT2560 Rev B for Mecreator2
+# Mega controller
 else ifeq ($(HARDWARE_MOTHERBOARD),1313)
-# Geeetech GT2560 Rev. A
+# Geeetech GT2560 Rev B for Mecreator2
 else ifeq ($(HARDWARE_MOTHERBOARD),1314)
-# Geeetech GT2560 Rev. A+ (with auto level probe)
+# Geeetech GT2560 Rev. A
 else ifeq ($(HARDWARE_MOTHERBOARD),1315)
-# Geeetech GT2560 Rev B for A10(M/D)
+# Geeetech GT2560 Rev. A+ (with auto level probe)
 else ifeq ($(HARDWARE_MOTHERBOARD),1316)
-# Geeetech GT2560 Rev B for A20(M/D)
+# Geeetech GT2560 Rev B for A10(M/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Einstart retrofit
+# Geeetech GT2560 Rev B for A20(M/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1318)
-# Wanhao 0ne+ i3 Mini
+# Einstart retrofit
 else ifeq ($(HARDWARE_MOTHERBOARD),1319)
+# Wanhao 0ne+ i3 Mini
+else ifeq ($(HARDWARE_MOTHERBOARD),1320)

 #
 # ATmega1281, ATmega2561
@@ -666,7 +686,7 @@ ifeq ($(HARDWARE_VARIANT), Teensy)

 else ifeq ($(HARDWARE_VARIANT), archim)
  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
  LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c

  ifeq ($(U8GLIB), 1)
@@ -687,7 +707,7 @@ CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
 CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
 CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
+CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
          -fshort-enums -ffunction-sections -fdata-sections
 ifneq ($(HARDWARE_MOTHERBOARD),)
  CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
@@ -3,7 +3,7 @@

  Marlin Firmware

-  (c) 2011-2019 MarlinFirmware
+  (c) 2011-2020 MarlinFirmware
  Portions of Marlin are (c) by their respective authors.
  All code complies with GPLv2 and/or GPLv3

@@ -19,7 +19,7 @@ Before diving in, we recommend the following essential links:

 Marlin Firmware Official Website

-  - http://marlinfw.org/
+  - https://marlinfw.org/
    The official Marlin Firmware website contains the most up-to-date
    documentation. Contributions are always welcome!

@@ -30,7 +30,7 @@ Configuration
    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

-  - http://marlinfw.org/docs/configuration/configuration.html
+  - https://marlinfw.org/docs/configuration/configuration.html
    Marlin's configuration options are explained in more detail here.

 Getting Help
@@ -45,9 +45,9 @@ Getting Help

 Contributing

-  - http://marlinfw.org/docs/development/contributing.html
+  - https://marlinfw.org/docs/development/contributing.html
    If you'd like to contribute to Marlin, read this first!

-  - http://marlinfw.org/docs/development/coding_standards.html
+  - https://marlinfw.org/docs/development/coding_standards.html
    Before submitting code get to know the Coding Standards.
 */
@@ -0,0 +1,76 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+////////////////////////////
+// VENDOR VERSION EXAMPLE //
+////////////////////////////
+
+/**
+ * Marlin release version identifier
+ */
+#define SHORT_BUILD_VERSION "2.0.5_SX4N"
+
+/**
+ * Verbose version identifier which should contain a reference to the location
+ * from where the binary was downloaded or the source code was compiled.
+ */
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
+
+/**
+ * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+ * here we define this default string as the date where the latest release
+ * version was tagged.
+ */
+#define STRING_DISTRIBUTION_DATE "2020-05-01"
+
+/**
+ * Defines a generic printer name to be output to the LCD after booting Marlin.
+ */
+#define MACHINE_NAME "TM3D SX4"
+
+/**
+ * The SOURCE_CODE_URL is the location where users will find the Marlin Source
+ * Code which is installed on the device. In most cases —unless the manufacturer
+ * has a distinct Github fork— the Source Code URL should just be the main
+ * Marlin repository.
+ */
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/TM_SX4_2.0"
+
+/**
+ * Default generic printer UUID.
+ */
+//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
+
+/**
+ * The WEBSITE_URL is the location where users can get more information such as
+ * documentation about a specific Marlin release.
+ */
+#define WEBSITE_URL "tinymachines3d.com"
+
+/**
+ * Set the vendor info the serial USB interface, if changable
+ * Currently only supported by DUE platform
+ */
+//#define  USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
@@ -29,7 +29,6 @@
 *  - http://www.marlinfw.org/tools/u8glib/converter.html
 *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
 */
-#include <avr/pgmspace.h>

 #define CUSTOM_BOOTSCREEN_TIMEOUT   2500
 #define CUSTOM_BOOTSCREEN_BMPWIDTH  128
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
-
 #ifdef __AVR__

 #include "../../inc/MarlinConfig.h"
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -25,7 +25,7 @@
 #include "math.h"

 #ifdef USBCON
-  #include "HardwareSerial.h"
+  #include <HardwareSerial.h>
 #else
  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
  #include "MarlinSerial.h"
@@ -38,6 +38,14 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>

+#ifndef pgm_read_ptr
+  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
+  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
+  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
+  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
+  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
+#endif
+
 // ------------------------
 // Defines
 // ------------------------
@@ -45,8 +53,8 @@
 //#define analogInputToDigitalPin(IO) IO

 #ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
-  #define CRITICAL_SECTION_END    SREG = _sreg
+  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END()    SREG = _sreg
 #endif
 #define ISRS_ENABLED() TEST(SREG, SREG_I)
 #define ENABLE_ISRS()  sei()
@@ -83,24 +91,37 @@ typedef int8_t pin_t;
  #define NUM_SERIAL 1
 #else
  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3"
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
  #endif

  #define MYSERIAL0 customizedSerial1

  #ifdef SERIAL_PORT_2
    #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3"
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
    #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
    #endif
-    #define NUM_SERIAL 2
    #define MYSERIAL1 customizedSerial2
+    #define NUM_SERIAL 2
  #else
    #define NUM_SERIAL 1
  #endif
 #endif

+#ifdef DGUS_SERIAL_PORT
+  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == SERIAL_PORT
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+  #endif
+  #define DGUS_SERIAL internalDgusSerial
+
+  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
+#endif
+
 // ------------------------
 // Public functions
 // ------------------------
@@ -337,9 +358,9 @@ void TIMER0_COMPB_vect_bottom()

 // ADC
 #ifdef DIDR2
-  #define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)
+  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
 #else
-  #define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0)
+  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
 #endif

 inline void HAL_adc_init() {
@@ -350,13 +371,14 @@ inline void HAL_adc_init() {
  #endif
 }

-#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
+#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
 #ifdef MUX5
-  #define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
 #else
-  #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
 #endif

+#define HAL_ADC_RESOLUTION 10
 #define HAL_READ_ADC()  ADC
 #define HAL_ADC_READY() !TEST(ADCSRA, ADSC)

@@ -373,6 +395,8 @@ inline void HAL_adc_init() {
 // AVR compatibility
 #define strtof strtod

+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+
 /**
 *  set_pwm_frequency
 *  Sets the frequency of the timer corresponding to the provided pin
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -197,7 +197,7 @@ void spiBegin() {
    // output pin high - like sending 0xFF
    WRITE(MOSI_PIN, HIGH);

-    for (uint8_t i = 0; i < 8; i++) {
+    LOOP_L_N(i, 8) {
      WRITE(SCK_PIN, HIGH);

      nop; // adjust so SCK is nice
@@ -224,7 +224,7 @@ void spiBegin() {
  void spiSend(uint8_t data) {
    // no interrupts during byte send - about 8µs
    cli();
-    for (uint8_t i = 0; i < 8; i++) {
+    LOOP_L_N(i, 8) {
      WRITE(SCK_PIN, LOW);
      WRITE(MOSI_PIN, data & 0x80);
      data <<= 1;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -41,7 +41,7 @@
 #if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))

  #include "MarlinSerial.h"
-  #include "../../Marlin.h"
+  #include "../../MarlinCore.h"

  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
@@ -55,7 +55,7 @@
  // A SW memory barrier, to ensure GCC does not overoptimize loops
  #define sw_barrier() asm volatile("": : :"memory");

-  #include "../../feature/emergency_parser.h"
+  #include "../../feature/e_parser.h"

  // "Atomically" read the RX head index value without disabling interrupts:
  // This MUST be called with RX interrupts enabled, and CAN'T be called
@@ -682,7 +682,7 @@

    // Round correctly so that print(1.999, 2) prints as "2.00"
    double rounding = 0.5;
-    for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
+    LOOP_L_N(i, digits) rounding *= 0.1;
    number += rounding;

    // Extract the integer part of the number and print it
@@ -757,6 +757,33 @@

 #endif

+#ifdef DGUS_SERIAL_PORT
+
+  template<typename Cfg>
+  typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
+    const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
+                            h = tx_buffer.head;  // next pos for queue.
+    int ret = t - h - 1;
+    if (ret < 0) ret += Cfg::TX_SIZE + 1;
+    return ret;
+  }
+
+  ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,DGUS_SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
+
+#endif
+
 // For AT90USB targets use the UART for BT interfacing
 #if defined(USBCON) && ENABLED(BLUETOOTH)
  HardwareSerial bluetoothSerial;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -31,10 +31,10 @@
 * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
 */

-#include "../shared/MarlinSerial.h"
-
 #include <WString.h>

+#include "../../inc/MarlinConfigPre.h"
+
 #ifndef SERIAL_PORT
  #define SERIAL_PORT 0
 #endif
@@ -217,6 +217,9 @@
      static ring_buffer_pos_t available();
      static void write(const uint8_t c);
      static void flushTX();
+      #ifdef DGUS_SERIAL_PORT
+        static ring_buffer_pos_t get_tx_buffer_free();
+      #endif

      FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
      FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
@@ -258,12 +261,12 @@
    static constexpr int PORT               = serial;
    static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
    static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-    static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
-    static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
-    static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
-    static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
-    static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
-    static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
+    static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
+    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
+    static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
+    static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
+    static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
  };
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;

@@ -292,6 +295,23 @@
  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
 #endif

+#ifdef DGUS_SERIAL_PORT
+  template <uint8_t serial>
+  struct MarlinInternalSerialCfg {
+    static constexpr int PORT               = serial;
+    static constexpr unsigned int RX_SIZE   = 128;
+    static constexpr unsigned int TX_SIZE   = 48;
+    static constexpr bool XONOFF            = false;
+    static constexpr bool EMERGENCYPARSER   = false;
+    static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_FRAMING_ERRORS = false;
+    static constexpr bool MAX_RX_QUEUED     = false;
+  };
+
+  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
+#endif
+
 // Use the UART for Bluetooth in AT90USB configurations
 #if defined(USBCON) && ENABLED(BLUETOOTH)
  extern HardwareSerial bluetoothSerial;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -59,7 +59,6 @@

 #include <avr/interrupt.h>

-#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"

@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -25,9 +25,15 @@

 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)

-#include "../shared/persistent_store_api.h"
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with implementations supplied by the framework.
+ */

-bool PersistentStore::access_start() { return true; }
+#include "../shared/eeprom_api.h"
+
+size_t PersistentStore::capacity()    { return E2END + 1; }
+bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
@@ -39,7 +45,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
    if (v != eeprom_read_byte(p)) {
      eeprom_write_byte(p, v);
      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
        return true;
      }
    }
@@ -61,7 +67,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
  return false;  // always assume success for AVR's
 }

-size_t PersistentStore::capacity() { return E2END + 1; }
-
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -46,39 +46,55 @@ void endstop_ISR() { endstops.update(); }
 /**
 * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
 *
- * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
+ * These macros for the Arduino MEGA do not include the two connected pins on Port J (D14, D15).
 * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
 * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
 */
 #if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
+
+  #define digitalPinHasPCICR(p)   (WITHIN(p, 10, 15) || WITHIN(p, 50, 53) || WITHIN(p, 62, 69))
+
  #undef  digitalPinToPCICR
-  #define digitalPinToPCICR(p)    ( WITHIN(p, 10, 15) || \
-                                    WITHIN(p, 50, 53) || \
-                                    WITHIN(p, 62, 69) ? &PCICR : nullptr )
+  #define digitalPinToPCICR(p)    (digitalPinHasPCICR(p) ? (&PCICR) : nullptr)
+
  #undef  digitalPinToPCICRbit
-  #define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
-                                    WITHIN(p, 14, 15) ? 1 : \
-                                    WITHIN(p, 62, 69) ? 2 : \
-                                    0 )
+  #define digitalPinToPCICRbit(p) (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
+                                   WITHIN(p, 14, 15) ? 1 : \
+                                   WITHIN(p, 62, 69) ? 2 : \
+                                   0)
+
  #undef  digitalPinToPCMSK
-  #define digitalPinToPCMSK(p)    ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
-                                    WITHIN(p, 14, 15) ? &PCMSK1 : \
-                                    WITHIN(p, 62, 69) ? &PCMSK2 : \
-                                    nullptr )
+  #define digitalPinToPCMSK(p)    (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? (&PCMSK0) : \
+                                   WITHIN(p, 14, 15) ? (&PCMSK1) : \
+                                   WITHIN(p, 62, 69) ? (&PCMSK2) : \
+                                   nullptr)
+
  #undef  digitalPinToPCMSKbit
-  #define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
-                                    (p) == 14 || (p) == 51 ? 2 : \
-                                    (p) == 15 || (p) == 52 ? 1 : \
-                                    (p) == 50 ? 3 : \
-                                    (p) == 53 ? 0 : \
-                                    WITHIN(p, 62, 69) ? ((p) - 62) : \
-                                    0 )
+  #define digitalPinToPCMSKbit(p) (WITHIN(p, 10, 13) ? ((p) - 6) : \
+                                   (p) == 14 || (p) == 51 ? 2 : \
+                                   (p) == 15 || (p) == 52 ? 1 : \
+                                   (p) == 50 ? 3 : \
+                                   (p) == 53 ? 0 : \
+                                   WITHIN(p, 62, 69) ? ((p) - 62) : \
+                                   0)
+
+#elif defined(__AVR_ATmega164A__) || defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324A__) || \
+      defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega324PB__) || \
+      defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || \
+      defined(__AVR_ATmega1284P__)
+
+  #define digitalPinHasPCICR(p)   WITHIN(p, 0, NUM_DIGITAL_PINS)
+
+#else
+
+  #error "Unsupported AVR variant!"
+
 #endif


 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
-  if (digitalPinToPCMSK(pin) != nullptr) {
+  if (digitalPinHasPCICR(pin)) {
    SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
    SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
    SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
@@ -108,7 +124,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
      pciSetup(X_MAX_PIN);
    #endif
  #endif
@@ -116,7 +132,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
      pciSetup(X_MIN_PIN);
    #endif
  #endif
@@ -124,7 +140,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
      pciSetup(Y_MAX_PIN);
    #endif
  #endif
@@ -132,7 +148,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
      pciSetup(Y_MIN_PIN);
    #endif
  #endif
@@ -140,7 +156,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
      pciSetup(Z_MAX_PIN);
    #endif
  #endif
@@ -148,7 +164,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
      pciSetup(Z_MIN_PIN);
    #endif
  #endif
@@ -156,7 +172,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X2_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
      pciSetup(X2_MAX_PIN);
    #endif
  #endif
@@ -164,7 +180,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X2_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
      pciSetup(X2_MIN_PIN);
    #endif
  #endif
@@ -172,7 +188,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y2_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
      pciSetup(Y2_MAX_PIN);
    #endif
  #endif
@@ -180,7 +196,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y2_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
      pciSetup(Y2_MIN_PIN);
    #endif
  #endif
@@ -188,7 +204,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z2_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
      pciSetup(Z2_MAX_PIN);
    #endif
  #endif
@@ -196,7 +212,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z2_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
      pciSetup(Z2_MIN_PIN);
    #endif
  #endif
@@ -204,7 +220,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z3_MAX_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
      pciSetup(Z3_MAX_PIN);
    #endif
  #endif
@@ -212,15 +228,31 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z3_MIN_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
      pciSetup(Z3_MIN_PIN);
    #endif
  #endif
+  #if HAS_Z4_MAX
+    #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(Z4_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable");
+      pciSetup(Z4_MAX_PIN);
+    #endif
+  #endif
+  #if HAS_Z4_MIN
+    #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(Z4_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable");
+      pciSetup(Z4_MIN_PIN);
+    #endif
+  #endif
  #if HAS_Z_MIN_PROBE_PIN
    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MIN_PROBE_PIN);
    #else
-      static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
      pciSetup(Z_MIN_PROBE_PIN);
    #endif
  #endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -23,7 +23,7 @@

 #include "../../inc/MarlinConfigPre.h"

-#if ENABLED(FAST_PWM_FAN)
+#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM

 #include "HAL.h"

@@ -167,7 +167,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
    uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };

    // loop over prescaler values
-    for (uint8_t i = 1; i < 8; i++) {
+    LOOP_S_L_N(i, 1, 8) {
      uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
      if (timer.n == 2) {
        // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
@@ -278,5 +278,5 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
  }
 }

-#endif // FAST_PWM_FAN
+#endif // NEEDS_HARDWARE_PWM
 #endif // __AVR__
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -98,9 +98,9 @@

 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
+#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-
-#define SET_PWM(IO)           SET_OUTPUT(IO)
+#define SET_PWM               SET_OUTPUT

 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
@@ -279,14 +279,25 @@ enum ClockSource2 : char {
 */

 // Determine which harware PWMs are already in use
+#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #if PIN_EXISTS(CONTROLLER_FAN)
-  #define PWM_CHK_FAN_B(P) (P == CONTROLLER_FAN_PIN || P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
+  #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
 #else
-  #define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
+  #define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P)
 #endif

-#if ANY_PIN(FAN, FAN1, FAN2)
-  #if PIN_EXISTS(FAN2)
+#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7)
+  #if PIN_EXISTS(FAN7)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN)
+  #elif PIN_EXISTS(FAN6)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN)
+  #elif PIN_EXISTS(FAN5)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN)
+  #elif PIN_EXISTS(FAN4)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN)
+  #elif PIN_EXISTS(FAN3)
+    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN)
+  #elif PIN_EXISTS(FAN2)
    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
  #elif PIN_EXISTS(FAN1)
    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -26,7 +26,7 @@
 *
 *   Hardware Pin  : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
 *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
- *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
+ *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
 */

 #include "../fastio.h"
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -25,21 +25,11 @@
 * Test AVR-specific configuration values for errors at compile-time.
 */

-/**
- * Digipot requirement
- */
- #if ENABLED(DIGIPOT_MCP4018)
-  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
-    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
-      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
-  #endif
-#endif
-
 /**
 * Checks for FAST PWM
 */
 #if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
-    #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
+  #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
 #endif

 /**
@@ -56,6 +46,10 @@
 /**
 * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
 */
-#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
  #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
+
+#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
+  #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
+#endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -26,7 +26,10 @@

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS

+#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
+
 #if AVR_AT90USB1286_FAMILY
+
  // Working with Teensyduino extension so need to re-define some things
  #include "pinsDebug_Teensyduino.h"
  // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
@@ -35,7 +38,9 @@
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
  #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
+
  #include "pinsDebug_plus_70.h"
  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
@@ -43,11 +48,13 @@
  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }

 #else
+
  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+
 #endif

 #define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
@@ -63,12 +70,12 @@

 void PRINT_ARRAY_NAME(uint8_t x) {
  char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
-  for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
+  LOOP_L_N(y, MAX_NAME_LENGTH) {
    char temp_char = pgm_read_byte(name_mem_pointer + y);
    if (temp_char != 0)
      SERIAL_CHAR(temp_char);
    else {
-      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) SERIAL_CHAR(' ');
+      LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
      break;
    }
  }
@@ -224,11 +231,10 @@ static void err_is_interrupt()   { SERIAL_ECHOPGM("   compare interrupt enabled"
 static void err_prob_interrupt() { SERIAL_ECHOPGM("   overflow interrupt enabled"); }
 static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }

-void com_print(uint8_t N, uint8_t Z) {
+inline void com_print(const uint8_t N, const uint8_t Z) {
  const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
  SERIAL_ECHOPGM("    COM");
-  SERIAL_CHAR('0' + N);
-  SERIAL_CHAR('A' + Z);
+  SERIAL_CHAR('0' + N, Z);
  SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
 }

@@ -240,8 +246,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
  if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);

  SERIAL_ECHOPGM("    TIMER");
-  SERIAL_CHAR(T + '0');
-  SERIAL_CHAR(L);
+  SERIAL_CHAR(T + '0', L);
  SERIAL_ECHO_SP(3);

  if (N == 3) {
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
  volatile uint8_t *outData = u8g_outData,
                   *outClock = u8g_outClock;
  U8G_ATOMIC_START();
-  for (uint8_t i = 0; i < 8; i++) {
+  LOOP_L_N(i, 8) {
    if (val & 0x80)
      *outData |= bitData;
    else
@@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  volatile uint8_t *outData = u8g_outData,
                   *outClock = u8g_outClock;
  U8G_ATOMIC_START();
-  for (uint8_t i = 0; i < 8; i++) {
+  LOOP_L_N(i, 8) {
    *outClock &= bitNotClock;
    if (val & 0x80)
      *outData |= bitData;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
-
 #ifdef __AVR__

 #include "../../inc/MarlinConfig.h"
@@ -28,7 +27,7 @@

 #include "watchdog.h"

-#include "../../Marlin.h"
+#include "../../MarlinCore.h"

 // Initialize watchdog with 8s timeout, if possible. Otherwise, make it 4s.
 void watchdog_init() {
@@ -62,7 +61,7 @@ void watchdog_init() {
 #if ENABLED(WATCHDOG_RESET_MANUAL)
  ISR(WDT_vect) {
    sei();  // With the interrupt driven serial we need to allow interrupts.
-    SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
+    SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
    minkill();  // interrupt-safe final kill and infinite loop
  }
 #endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -19,7 +19,6 @@
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
-
 #ifdef ARDUINO_ARCH_SAM

 #include "../../core/macros.h"
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -94,8 +94,8 @@ int freeMemory() {
 // ADC
 // ------------------------

-void HAL_adc_start_conversion(const uint8_t adc_pin) {
-  HAL_adc_result = analogRead(adc_pin);
+void HAL_adc_start_conversion(const uint8_t ch) {
+  HAL_adc_result = analogRead(ch);
 }

 uint16_t HAL_adc_get_result() {
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
@@ -30,6 +30,7 @@
 #define CPU_32_BIT

 #include "../shared/Marduino.h"
+#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
@@ -38,26 +39,62 @@

 #include <stdint.h>

-// Serial ports
-#if !WITHIN(SERIAL_PORT, -1, 3)
-  #error "SERIAL_PORT must be from -1 to 3"
+// Define MYSERIAL0/1 before MarlinSerial includes!
+#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
+  #define MYSERIAL0 customizedSerial1
+#elif SERIAL_PORT == 0
+  #define MYSERIAL0 Serial
+#elif SERIAL_PORT == 1
+  #define MYSERIAL0 Serial1
+#elif SERIAL_PORT == 2
+  #define MYSERIAL0 Serial2
+#elif SERIAL_PORT == 3
+  #define MYSERIAL0 Serial3
+#else
+  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif

-// MYSERIAL0 required before MarlinSerial includes!
-#define MYSERIAL0 customizedSerial1
-
 #ifdef SERIAL_PORT_2
-  #if !WITHIN(SERIAL_PORT_2, -1, 3)
-    #error "SERIAL_PORT_2 must be from -1 to 3"
-  #elif SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
+  #if SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL1 customizedSerial2
+  #elif SERIAL_PORT_2 == 0
+    #define MYSERIAL1 Serial
+  #elif SERIAL_PORT_2 == 1
+    #define MYSERIAL1 Serial1
+  #elif SERIAL_PORT_2 == 2
+    #define MYSERIAL1 Serial2
+  #elif SERIAL_PORT_2 == 3
+    #define MYSERIAL1 Serial3
+  #else
+    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
  #endif
  #define NUM_SERIAL 2
-  #define MYSERIAL1 customizedSerial2
 #else
  #define NUM_SERIAL 1
 #endif

+#ifdef DGUS_SERIAL_PORT
+  #if DGUS_SERIAL_PORT == SERIAL_PORT
+    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == -1
+    #define DGUS_SERIAL internalDgusSerial
+  #elif DGUS_SERIAL_PORT == 0
+    #define DGUS_SERIAL Serial
+  #elif DGUS_SERIAL_PORT == 1
+    #define DGUS_SERIAL Serial1
+  #elif DGUS_SERIAL_PORT == 2
+    #define DGUS_SERIAL Serial2
+  #elif DGUS_SERIAL_PORT == 3
+    #define DGUS_SERIAL Serial3
+  #else
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #endif
+#endif
+
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"

@@ -82,8 +119,8 @@ typedef int8_t pin_t;
 //
 // Interrupts
 //
-#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
+#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
@@ -94,14 +131,6 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason

-//
-// EEPROM
-//
-void eeprom_write_byte(uint8_t *pos, unsigned char value);
-uint8_t eeprom_read_byte(uint8_t *pos);
-void eeprom_read_block (void *__dst, const void *__src, size_t __n);
-void eeprom_update_block (const void *__src, void *__dst, size_t __n);
-
 //
 // ADC
 //
@@ -111,15 +140,16 @@ extern uint16_t HAL_adc_result;     // result of last ADC conversion
  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
 #endif

-#define HAL_ANALOG_SELECT(pin)
+#define HAL_ANALOG_SELECT(ch)

 inline void HAL_adc_init() {}//todo

-#define HAL_START_ADC(pin)  HAL_adc_start_conversion(pin)
+#define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
+#define HAL_ADC_RESOLUTION  10
 #define HAL_READ_ADC()      HAL_adc_result
 #define HAL_ADC_READY()     true

-void HAL_adc_start_conversion(const uint8_t adc_pin);
+void HAL_adc_start_conversion(const uint8_t ch);
 uint16_t HAL_adc_get_result();

 //
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -240,7 +240,7 @@
  }

  // all the others
-  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4uS => 125khz
+  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz

  static uint8_t spiTransferX(uint8_t b) { // using Mode 0
    int bits = 8;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
  memcpy(&ram_tab, romtab, sizeof(ram_tab));

  // Disable global interrupts
-  CRITICAL_SECTION_START;
+  CRITICAL_SECTION_START();

  // Set the vector table base address to the SRAM copy
  SCB->VTOR = (uint32_t)(&ram_tab);

  // Reenable interrupts
-  CRITICAL_SECTION_END;
+  CRITICAL_SECTION_END();

  // Return the address of the table
  return (pfnISR_Handler*)(&ram_tab);
@@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  pfnISR_Handler *isrtab = get_relocated_table_addr();

  // Disable global interrupts
-  CRITICAL_SECTION_START;
+  CRITICAL_SECTION_START();

  // Get the original handler
  pfnISR_Handler oldHandler = isrtab[irq + 16];
@@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
  isrtab[irq + 16] = newHandler;

  // Reenable interrupts
-  CRITICAL_SECTION_END;
+  CRITICAL_SECTION_END();

  // Return the original one
  return oldHandler;
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -31,7 +31,7 @@

 #include "MarlinSerial.h"
 #include "InterruptVectors.h"
-#include "../../Marlin.h"
+#include "../../MarlinCore.h"

 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
@@ -45,7 +45,7 @@ template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSeria
 // A SW memory barrier, to ensure GCC does not overoptimize loops
 #define sw_barrier() asm volatile("": : :"memory");

-#include "../../feature/emergency_parser.h"
+#include "../../feature/e_parser.h"

 // (called with RX interrupts disabled)
 template<typename Cfg>
@@ -606,7 +606,7 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {

  // Round correctly so that print(1.999, 2) prints as "2.00"
  double rounding = 0.5;
-  for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
+  LOOP_L_N(i, digits) rounding *= 0.1;
  number += rounding;

  // Extract the integer part of the number and print it
@@ -629,23 +629,13 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {

 // If not using the USB port as serial port
 #if SERIAL_PORT >= 0
-
-  // Preinstantiate
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
-
-  // Instantiate
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
 #endif

-#ifdef SERIAL_PORT_2
-
-  // Preinstantiate
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
-
-  // Instantiate
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
+#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
 #endif

 #endif // ARDUINO_ARCH_SAM
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -27,10 +27,10 @@
 * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
 */

-#include "../shared/MarlinSerial.h"
-
 #include <WString.h>

+#include "../../inc/MarlinConfigPre.h"
+
 #define DEC 10
 #define HEX 16
 #define OCT 8
@@ -163,22 +163,18 @@ struct MarlinSerialCfg {
  static constexpr int PORT               = serial;
  static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
  static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-  static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
-  static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
-  static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
-  static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
-  static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
-  static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
+  static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
+  static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
+  static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
+  static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
+  static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
+  static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
 };

 #if SERIAL_PORT >= 0
-
  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-
-#endif // SERIAL_PORT >= 0
-
-#ifdef SERIAL_PORT_2
-
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
+#endif
+
+#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
 #endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -29,12 +29,12 @@

 #include "../../inc/MarlinConfig.h"

-#if SERIAL_PORT == -1
+#if HAS_USB_SERIAL

 #include "MarlinSerialUSB.h"

 #if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/emergency_parser.h"
+  #include "../../feature/e_parser.h"
 #endif

 // Imports from Atmel USB Stack/CDC implementation
@@ -73,9 +73,7 @@ int MarlinSerialUSB::peek() {

  pending_char = udi_cdc_getc();

-  #if ENABLED(EMERGENCY_PARSER)
-    emergency_parser.update(emergency_state, (char)pending_char);
-  #endif
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)pending_char));

  return pending_char;
 }
@@ -97,9 +95,7 @@ int MarlinSerialUSB::read() {

  int c = udi_cdc_getc();

-  #if ENABLED(EMERGENCY_PARSER)
-    emergency_parser.update(emergency_state, (char)c);
-  #endif
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)c));

  return c;
 }
@@ -259,7 +255,7 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {

  // Round correctly so that print(1.999, 2) prints as "2.00"
  double rounding = 0.5;
-  for (uint8_t i = 0; i < digits; ++i)
+  LOOP_L_N(i, digits)
    rounding *= 0.1;

  number += rounding;
@@ -283,8 +279,12 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 }

 // Preinstantiate
-MarlinSerialUSB customizedSerial1;
-
-#endif // SERIAL_PORT == -1
+#if SERIAL_PORT == -1
+  MarlinSerialUSB customizedSerial1;
+#endif
+#if SERIAL_PORT_2 == -1
+  MarlinSerialUSB customizedSerial2;
+#endif

+#endif // HAS_USB_SERIAL
 #endif // ARDUINO_ARCH_SAM
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -28,7 +28,7 @@

 #include "../../inc/MarlinConfig.h"

-#if SERIAL_PORT == -1
+#if HAS_USB_SERIAL

 #include <WString.h>

@@ -88,6 +88,12 @@ private:
  static void printFloat(double, uint8_t);
 };

-extern MarlinSerialUSB customizedSerial1;
+#if SERIAL_PORT == -1
+  extern MarlinSerialUSB customizedSerial1;
+#endif

-#endif // SERIAL_PORT == -1
+#if SERIAL_PORT_2 == -1
+  extern MarlinSerialUSB customizedSerial2;
+#endif
+
+#endif // HAS_USB_SERIAL
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -44,7 +44,6 @@

 #if HAS_SERVOS

-#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"

@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,7 +63,7 @@

 #include <U8glib.h>

-#include "../../../Marlin.h"
+#include "../../../MarlinCore.h"

 void spiBegin();
 void spiInit(uint8_t spiRate);
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -80,7 +80,7 @@ Pio *SCK_pPio, *MOSI_pPio;
 uint32_t SCK_dwMask, MOSI_dwMask;

 void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
-  for (uint8_t i = 0; i < 8; i++) {
+  LOOP_L_N(i, 8) {
    if (val & 0x80)
      MOSI_pPio->PIO_SODR = MOSI_dwMask;
    else
@@ -94,7 +94,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
 }

 void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
-  for (uint8_t i = 0; i < 8; i++) {
+  LOOP_L_N(i, 8) {
    SCK_pPio->PIO_CODR = SCK_dwMask;
    DELAY_NS(50);
    if (val & 0x80)
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,3 +1,34 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+
+#ifndef E2END
+  #define E2END 0xFFF // Default to Flash emulated EEPROM size (eeprom_emul.cpp)
+#endif

 /* EEPROM emulation over flash with reduced wear
 *
@@ -29,14 +60,7 @@
 *
 */

-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
-
-#include "../shared/Marduino.h"
-#include "../shared/persistent_store_api.h"
+//#define EE_EMU_DEBUG

 #define EEPROMSize     4096
 #define PagesPerGroup   128
@@ -113,15 +137,18 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
               curPage = 0,         // Current FLASH page inside the group
               curGroup = 0xFF;     // Current FLASH group

-//#define EE_EMU_DEBUG
-#ifdef EE_EMU_DEBUG
-  static void ee_Dump(int page,const void* data) {
+#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
+#include "../../core/debug_out.h"
+
+static void ee_Dump(const int page, const void* data) {
+
+  #ifdef EE_EMU_DEBUG

    const uint8_t* c = (const uint8_t*) data;
    char buffer[80];

    sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
-    SERIAL_ECHO(buffer);
+    DEBUG_ECHO(buffer);

    char* p = &buffer[0];
    for (int i = 0; i< PageSize; ++i) {
@@ -131,12 +158,16 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
      if ((i & 0xF) == 0xF) {
        *p++ = '\n';
        *p = 0;
-        SERIAL_ECHO(buffer);
+        DEBUG_ECHO(buffer);
        p = &buffer[0];
      }
    }
-  }
-#endif
+
+  #else
+    UNUSED(page);
+    UNUSED(data);
+  #endif
+}

 /* Flash Writing Protection Key */
 #define FWP_KEY    0x5Au
@@ -149,17 +180,16 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
  #define EEFC_ERROR_FLAGS  (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
 #endif

-
 /**
 * Writes the contents of the specified page (no previous erase)
 * @param page    (page #)
 * @param data    (pointer to the data buffer)
 */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page,const void* data) {
+static bool ee_PageWrite(uint16_t page, const void* data) {

  uint16_t i;
-  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
+  uint32_t addrflash = uint32_t(getFlashStorage(page));

  // Read the flash contents
  uint32_t pageContents[PageSize>>2];
@@ -174,13 +204,11 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
  for (i = 0; i <PageSize >> 2; i++)
    pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));

-  #ifdef EE_EMU_DEBUG
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPAIR("EEPROM PageWrite   ", page);
-    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-    SERIAL_FLUSH();
-  #endif
+  DEBUG_ECHO_START();
+  DEBUG_ECHOLNPAIR("EEPROM PageWrite   ", page);
+  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+  DEBUG_FLUSH();

  // Get the page relative to the start of the EFC controller, and the EFC controller to use
  Efc *efc;
@@ -222,10 +250,8 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
    // Reenable interrupts
    __enable_irq();

-    #ifdef EE_EMU_DEBUG
-      SERIAL_ECHO_START();
-      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
-    #endif
+    DEBUG_ECHO_START();
+    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
    return false;
  }

@@ -249,10 +275,9 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
    // Reenable interrupts
    __enable_irq();

-    #ifdef EE_EMU_DEBUG
-      SERIAL_ECHO_START();
-      SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
-    #endif
+    DEBUG_ECHO_START();
+    DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
+
    return false;
  }

@@ -266,11 +291,11 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
  if (memcmp(getFlashStorage(page),data,PageSize)) {

    #ifdef EE_EMU_DEBUG
-      SERIAL_ECHO_START();
-      SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
+      DEBUG_ECHO_START();
+      DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);

-      ee_Dump( page,(uint32_t *) addrflash);
-      ee_Dump(-page,data);
+      ee_Dump( page, (uint32_t *)addrflash);
+      ee_Dump(-page, data);

      // Calculate count of changed bits
      uint32_t* p1 = (uint32_t*)addrflash;
@@ -286,7 +311,7 @@ static bool ee_PageWrite(uint16_t page,const void* data) {
          }
        }
      }
-      SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
+      DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
    #endif

    return false;
@@ -303,15 +328,13 @@ __attribute__ ((long_call, section (".ramfunc")))
 static bool ee_PageErase(uint16_t page) {

  uint16_t i;
-  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
+  uint32_t addrflash = uint32_t(getFlashStorage(page));

-  #ifdef EE_EMU_DEBUG
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPAIR("EEPROM PageErase  ", page);
-    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-    SERIAL_FLUSH();
-  #endif
+  DEBUG_ECHO_START();
+  DEBUG_ECHOLNPAIR("EEPROM PageErase  ", page);
+  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+  DEBUG_FLUSH();

  // Get the page relative to the start of the EFC controller, and the EFC controller to use
  Efc *efc;
@@ -352,10 +375,9 @@ static bool ee_PageErase(uint16_t page) {
    // Reenable interrupts
    __enable_irq();

-    #ifdef EE_EMU_DEBUG
-      SERIAL_ECHO_START();
-      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
-    #endif
+    DEBUG_ECHO_START();
+    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+
    return false;
  }

@@ -377,10 +399,9 @@ static bool ee_PageErase(uint16_t page) {
    // Reenable interrupts
    __enable_irq();

-    #ifdef EE_EMU_DEBUG
-      SERIAL_ECHO_START();
-      SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
-    #endif
+    DEBUG_ECHO_START();
+    DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+
    return false;
  }

@@ -394,20 +415,17 @@ static bool ee_PageErase(uint16_t page) {
  uint32_t * aligned_src = (uint32_t *) addrflash;
  for (i = 0; i < PageSize >> 2; i++) {
    if (*aligned_src++ != 0xFFFFFFFF) {
-
-      #ifdef EE_EMU_DEBUG
-        SERIAL_ECHO_START();
-        SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
-
-        ee_Dump( page,(uint32_t *) addrflash);
-      #endif
+      DEBUG_ECHO_START();
+      DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+      ee_Dump(page, (uint32_t *)addrflash);
      return false;
    }
  }

  return true;
 }
-static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
+
+static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {

  uint32_t baddr;
  uint32_t blen;
@@ -490,7 +508,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
  return 0xFF;
 }

-static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
+static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
  uint32_t baddr,
           blen,
           nextAddr = 0xFFFF,
@@ -582,7 +600,7 @@ static bool ee_IsPageClean(int page) {
  return true;
 }

-static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
+static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {

  // Check if RAM buffer has something to be written
  bool isEmpty = true;
@@ -908,11 +926,9 @@ static void ee_Init() {
  // If all groups seem to be used, default to first group
  if (curGroup >= GroupCount) curGroup = 0;

-  #ifdef EE_EMU_DEBUG
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
-    SERIAL_FLUSH();
-  #endif
+  DEBUG_ECHO_START();
+  DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+  DEBUG_FLUSH();

  // Now, validate that all the other group pages are empty
  for (int grp = 0; grp < GroupCount; grp++) {
@@ -920,11 +936,9 @@ static void ee_Init() {

    for (int page = 0; page < PagesPerGroup; page++) {
      if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
-        #ifdef EE_EMU_DEBUG
-          SERIAL_ECHO_START();
-          SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
-          SERIAL_FLUSH();
-        #endif
+        DEBUG_ECHO_START();
+        DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
+        DEBUG_FLUSH();
        ee_PageErase(grp * PagesPerGroup + page);
      }
    }
@@ -934,66 +948,66 @@ static void ee_Init() {
  // and also validate that all the other ones are clean
  for (curPage = 0; curPage < PagesPerGroup; curPage++) {
    if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
-      #ifdef EE_EMU_DEBUG
-        ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
-      #endif
+      ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
      break;
    }
  }

-  #ifdef EE_EMU_DEBUG
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPAIR("EEPROM Active page: ", curPage);
-    SERIAL_FLUSH();
-  #endif
+  DEBUG_ECHO_START();
+  DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
+  DEBUG_FLUSH();

  // Make sure the pages following the first clean one are also clean
  for (int page = curPage + 1; page < PagesPerGroup; page++) {
    if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
-      #ifdef EE_EMU_DEBUG
-        SERIAL_ECHO_START();
-        SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
-        SERIAL_FLUSH();
-        ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
-      #endif
+      DEBUG_ECHO_START();
+      DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
+      DEBUG_FLUSH();
+      ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
      ee_PageErase(curGroup * PagesPerGroup + page);
    }
  }
 }

-uint8_t eeprom_read_byte(uint8_t* addr) {
-  ee_Init();
-  return ee_Read((uint32_t)addr);
+/* PersistentStore -----------------------------------------------------------*/
+
+#include "../shared/eeprom_api.h"
+
+size_t PersistentStore::capacity()    { return E2END + 1; }
+bool PersistentStore::access_start()  { ee_Init();  return true; }
+bool PersistentStore::access_finish() { ee_Flush(); return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != ee_Read(uint32_t(p))) {
+      ee_Write(uint32_t(p), v);
+      delay(2);
+      if (ee_Read(uint32_t(p)) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  };
+  return false;
 }

-void eeprom_write_byte(uint8_t* addr, uint8_t value) {
-  ee_Init();
-  ee_Write((uint32_t)addr, value);
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = ee_Read(uint32_t(pos));
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
 }

-void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
-  uint8_t* dst = (uint8_t*)__dst;
-  const uint8_t* src = (const uint8_t*)__src;
-  while (__n--) {
-    eeprom_write_byte(dst, *src);
-    ++dst;
-    ++src;
-  }
-}
-
-void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
-  uint8_t* dst = (uint8_t*)__dst;
-  uint8_t* src = (uint8_t*)__src;
-  while (__n--) {
-    *dst = eeprom_read_byte(src);
-    ++dst;
-    ++src;
-  }
-}
-
-void eeprom_flush() {
-  ee_Flush();
-}
-
-#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
-#endif // ARDUINO_ARCH_AVR
+#endif // FLASH_EEPROM_EMULATION
+#endif // ARDUINO_ARCH_SAM
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
@@ -22,27 +22,21 @@
 */
 #ifdef ARDUINO_ARCH_SAM

-#include "../../inc/MarlinConfigPre.h"
-
-#if ENABLED(EEPROM_SETTINGS)
-
 #include "../../inc/MarlinConfig.h"
-#include "../shared/persistent_store_api.h"

-#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
-  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
-#endif
+#if USE_WIRED_EEPROM

-extern void eeprom_flush();
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */

-bool PersistentStore::access_start() { return true; }
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"

-bool PersistentStore::access_finish() {
-  #if NONE(I2C_EEPROM, SPI_EEPROM)
-    eeprom_flush();
-  #endif
-  return true;
-}
+size_t PersistentStore::capacity()    { return E2END + 1; }
+bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_finish() { return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
@@ -54,7 +48,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
      eeprom_write_byte(p, v);
      delay(2);
      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
        return true;
      }
    }
@@ -76,7 +70,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
  return false;
 }

-size_t PersistentStore::capacity() { return E2END + 1; }
-
-#endif // EEPROM_SETTINGS
+#endif // USE_WIRED_EEPROM
 #endif // ARDUINO_ARCH_SAM
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -47,37 +47,21 @@ void endstop_ISR() { endstops.update(); }

 void setup_endstop_interrupts() {
  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #if HAS_X_MAX
-    _ATTACH(X_MAX_PIN);
-  #endif
-  #if HAS_X_MIN
-    _ATTACH(X_MIN_PIN);
-  #endif
-  #if HAS_Y_MAX
-    _ATTACH(Y_MAX_PIN);
-  #endif
-  #if HAS_Y_MIN
-    _ATTACH(Y_MIN_PIN);
-  #endif
-  #if HAS_Z_MAX
-    _ATTACH(Z_MAX_PIN);
-  #endif
-  #if HAS_Z_MIN
-     _ATTACH(Z_MIN_PIN);
-  #endif
-  #if HAS_Z2_MAX
-    _ATTACH(Z2_MAX_PIN);
-  #endif
-  #if HAS_Z2_MIN
-    _ATTACH(Z2_MIN_PIN);
-  #endif
-  #if HAS_Z3_MAX
-    _ATTACH(Z3_MAX_PIN);
-  #endif
-  #if HAS_Z3_MIN
-    _ATTACH(Z3_MIN_PIN);
-  #endif
-  #if HAS_Z_MIN_PROBE_PIN
-    _ATTACH(Z_MIN_PROBE_PIN);
-  #endif
+  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
+  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
+  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
+  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
+  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
+  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
+  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
+  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
+  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
 }
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -166,7 +166,7 @@
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM(IO)           SET_OUTPUT(IO)
+#define SET_PWM               SET_OUTPUT

 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
@@ -174,7 +174,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)

 // Shorthand
-#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
+#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)

 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)
@@ -0,0 +1,206 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * The PWM module is only used to generate interrupts at specified times. It
+ * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
+ * that interrupt.
+ *
+ * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
+ * not have obvious ripple on the Vref signals.
+ *
+ * The data structures are setup to minimize the computation done by the ISR which
+ * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
+ *
+ * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
+ * signals are set active when this counter overflows and resets to zero.  The compare
+ * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
+ * When counter 0 matches the compare value then that channel generates an interrupt.
+ * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
+ *
+ * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if MB(PRINTRBOARD_G2)
+
+#include "G2_PWM.h"
+
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
+  #define G2_PWM_X 1
+#else
+  #define G2_PWM_X 0
+#endif
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+  #define G2_PWM_Y 1
+#else
+  #define G2_PWM_Y 0
+#endif
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
+  #define G2_PWM_Z 1
+#else
+  #define G2_PWM_Z 0
+#endif
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
+  #define G2_PWM_E 1
+#else
+  #define G2_PWM_E 0
+#endif
+#define G2_MASK_X(V) (G2_PWM_X * (V))
+#define G2_MASK_Y(V) (G2_PWM_Y * (V))
+#define G2_MASK_Z(V) (G2_PWM_Z * (V))
+#define G2_MASK_E(V) (G2_PWM_E * (V))
+
+volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
+                  *SODR_B = &PIOB->PIO_SODR,
+                  *CODR_A = &PIOA->PIO_CODR,
+                  *CODR_B = &PIOB->PIO_CODR;
+
+PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
+
+void Stepper::digipot_init() {
+
+  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
+    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  #endif
+  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  #endif
+  #if G2_PWM_Z
+    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  #endif
+  #if G2_PWM_E
+    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
+  #endif
+
+  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
+  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
+  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
+
+  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
+
+  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
+
+  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
+  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
+  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
+  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
+  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
+  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
+  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
+
+  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
+
+  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
+  PWM->PWM_IER2 = PWM_IER2_CMPM0
+    | G2_MASK_X(PWM_IER2_CMPM1)
+    | G2_MASK_Y(PWM_IER2_CMPM2)
+    | G2_MASK_Z(PWM_IER2_CMPM3)
+    | G2_MASK_E(PWM_IER2_CMPM4)
+  ; // generate interrupt on compare event
+
+  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+
+  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
+    | G2_MASK_X(PWM_SCM_SYNC1)
+    | G2_MASK_Y(PWM_SCM_SYNC2)
+    | G2_MASK_Z(PWM_SCM_SYNC3)
+    | G2_MASK_E(PWM_SCM_SYNC4)
+  ; // sync 1-4 with 0, use mode 0 for updates
+
+  PWM->PWM_ENA = PWM_ENA_CHID0
+    | G2_MASK_X(PWM_ENA_CHID1)
+    | G2_MASK_Y(PWM_ENA_CHID2)
+    | G2_MASK_Z(PWM_ENA_CHID3)
+    | G2_MASK_E(PWM_ENA_CHID4)
+  ; // enable channels used by G2
+
+  PWM->PWM_IER1 = PWM_IER1_CHID0
+    | G2_MASK_X(PWM_IER1_CHID1)
+    | G2_MASK_Y(PWM_IER1_CHID2)
+    | G2_MASK_Z(PWM_IER1_CHID3)
+    | G2_MASK_E(PWM_IER1_CHID4)
+  ; // enable interrupts for channels used by G2
+
+  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
+  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
+}
+
+void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+
+  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
+
+  switch (driver) {
+    case 0:
+      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+      break;
+    case 1:
+      if (G2_PWM_Z) {
+        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+      }
+      break;
+    default:
+      if (G2_PWM_E) {
+        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+      }
+      break;
+  }
+}
+
+volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
+
+void PWM_Handler() {
+  PWM_ISR1_STATUS = PWM->PWM_ISR1;
+  PWM_ISR2_STATUS = PWM->PWM_ISR2;
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
+    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
+    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
+    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
+    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
+  }
+  else {
+    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
+    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
+    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
+    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
+  }
+  return;
+}
+
+#endif // PRINTRBOARD_G2
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -63,7 +63,7 @@ extern PWM_map ISR_table[NUM_PWMS];
 extern uint32_t motor_current_setting[3];

 #define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
-#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6 ; i++) work_table[i] = active_table[i]; }while(0)
+#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)

 #define PWM_MR0 19999         // base repetition rate minus one count - 20mS
 #define PWM_PR 24             // prescaler value - prescaler divide by 24 + 1  -  1 MHz output
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -21,6 +21,8 @@
 */
 #pragma once

-#include "../shared/persistent_store_api.h"
-
-#define FLASH_EEPROM_EMULATION
+#if USE_FALLBACK_EEPROM
+  #define FLASH_EEPROM_EMULATION
+#elif EITHER(I2C_EEPROM, SPI_EEPROM)
+  #define USE_SHARED_EEPROM 1
+#endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -55,3 +55,7 @@
 #if ENABLED(FAST_PWM_FAN)
  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif
+
+#if HAS_TMC_SW_SERIAL
+  #error "TMC220x Software Serial is not supported on this platform."
+#endif
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
 *
@@ -1,7 +1,7 @@
 /**
 * Marlin 3D Printer Firmware
 *
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
 *
 * This program is free software: you can redistribute it and/or modify
@@ -0,0 +1,18 @@
+#
+# Set upload_command
+#
+#  Windows: bossac.exe
+#  Other: leave unchanged
+#
+
+import platform
+current_OS = platform.system()
+
+if current_OS == 'Windows':
+
+	Import("env")
+
+	# Use bossac.exe on Windows
+	env.Replace(
+	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot"
+	)
@@ -444,8 +444,8 @@ typedef struct
 #define ENABLE    1
 #ifndef __cplusplus
 #ifndef __bool_true_false_are_defined
-#define false 0
-#define true 1
+#define false (1==0)
+#define true (1==1)
 #endif
 #endif
 #ifndef PASS
@@ -48,9 +48,7 @@
 #define _CONF_USB_H_

 #undef UNUSED                           /* To avoid a macro clash as macros.h already defines it */
-#include "../../../core/macros.h"       /* For ENABLED()/DISABLED() */
-#include "../../../core/boards.h"       /* For MB() */
-#include "../../../../Configuration.h"  /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
+#include "../../../inc/MarlinConfigPre.h"
 #include "compiler.h"

 /**
@@ -59,8 +57,6 @@
 */

 //! Device definition (mandatory)
-#define  USB_DEVICE_VENDOR_ID             0x03EB /* ATMEL VID */
-#define  USB_DEVICE_PRODUCT_ID            0x2424 /* MSC / CDC */
 #define  USB_DEVICE_MAJOR_VERSION         1
 #define  USB_DEVICE_MINOR_VERSION         0
 #define  USB_DEVICE_POWER                 100 // Consumption on Vbus line (mA)
@@ -70,15 +66,6 @@
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)

-//! USB Device string definitions (Optional)
-#define  USB_DEVICE_MANUFACTURE_NAME      "marlinfw.org"
-#ifdef CUSTOM_MACHINE_NAME
-  #define  USB_DEVICE_PRODUCT_NAME        CUSTOM_MACHINE_NAME
-#else
-  #define  USB_DEVICE_PRODUCT_NAME        "3D Printer"
-#endif
-#define  USB_DEVICE_SERIAL_NAME           "123985739853"
-
 /**
 * Device speeds support
 * Low speed not supported by CDC and MSC
@@ -91,10 +78,6 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED

-#if MB(ARCHIM1)
-  #define USB_DEVICE_FULL_SPEED
-#endif
-
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
  #if (UC3A3||UC3A4)
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
InsanityAutomation	a5b5451314	Update from Devel branch	2020-06-17 10:16:13 -04:00
InsanityAutomation	a0d8a0ab14	Update Configuration.h	2019-06-21 13:37:20 -04:00
InsanityAutomation	3721b58a78	Tweaks	2019-06-20 13:20:35 -04:00
InsanityAutomation	2fd98ab17c	Update Configuration.h	2019-06-01 10:04:11 -04:00
InsanityAutomation	c1e57e3a9b	Update Configuration.h	2019-04-27 09:42:49 -04:00
InsanityAutomation	7232bdd883	Update pause.cpp	2019-04-25 20:41:45 -04:00
InsanityAutomation	e4cad11951	Add commission menu	2019-03-31 10:42:02 -04:00
InsanityAutomation	d923c018b8	Update Configuration.h	2019-03-30 18:03:11 -04:00
InsanityAutomation	e3f6f1b12c	MRRF Bump	2019-03-29 17:43:34 -04:00
InsanityAutomation	ec2c721ca2	Bump	2019-02-19 18:44:42 -05:00
InsanityAutomation	919d7f8999	Bump	2019-01-16 11:07:15 -05:00
InsanityAutomation	8573625fab	add runout options	2019-01-13 16:35:15 -05:00
InsanityAutomation	900bb1aba3	Merge pull request #18 from InsanityAutomation/More-SD-Pause-Fixes More sd pause fixes	2019-01-13 16:12:18 -05:00
InsanityAutomation	5927818234	feed rate and park	2019-01-13 16:11:22 -05:00
InsanityAutomation	8be2aa0ef4	Initial commit	2019-01-13 14:35:45 -05:00
InsanityAutomation	6284eaf17d	Make M25 work as well	2019-01-12 23:36:12 -05:00
InsanityAutomation	5094b167d4	Update menu_main.cpp	2019-01-12 19:40:20 -05:00
InsanityAutomation	42e9e85282	Merge branch 'bugfix-2.0.x' into More-SD-Pause-Fixes	2019-01-12 19:34:02 -05:00
InsanityAutomation	eb0bf22d09	Update menu_main.cpp	2019-01-12 19:32:52 -05:00
InsanityAutomation	57e51e0d7d	Bump	2019-01-12 19:00:23 -05:00
Scott Lahteine	3358333e22	Remove extra lcd_advanced_pause_show_message call	2019-01-12 17:14:33 -06:00
Scott Lahteine	a7a6503917	Update menu_main.cpp	2019-01-12 17:04:00 -06:00
Scott Lahteine	acbe72c239	Remove extra defer_status_screen(false), refresh()	2019-01-12 17:00:53 -06:00
InsanityAutomation	dbac603128	Update menu_main.cpp	2019-01-12 17:09:22 -05:00
				`@@ -1 +0,0 @@`
				`custom: http://www.thinkyhead.com/donate-to-marlin`