Initial Commit

Marlin/Configuration.h

@@ -77,8 +77,8 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
-//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
+#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes.
+#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
  * *** VENDORS PLEASE READ ***
@@ -95,7 +95,7 @@
 #define SHOW_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Bootscreen.h on startup.
-//#define SHOW_CUSTOM_BOOTSCREEN
+#define SHOW_CUSTOM_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
 //#define CUSTOM_STATUS_SCREEN_IMAGE
@@ -476,7 +476,7 @@
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 0
+#define TEMP_SENSOR_BED 1
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
@@ -496,12 +496,12 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_RESIDENCY_TIME         5  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW                  3  // (°C) Temperature proximity for the "temperature reached" timer
 #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
-#define TEMP_BED_RESIDENCY_TIME     10  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_RESIDENCY_TIME     5  // (seconds) Time to wait for bed to "settle" in M190
+#define TEMP_BED_WINDOW              2  // (°C) Temperature proximity for the "temperature reached" timer
 #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
@@ -524,7 +524,7 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 275
+#define HEATER_0_MAXTEMP 305
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -557,8 +557,8 @@
 #define PID_K1 0.95      // Smoothing factor within any PID loop
 
 #if ENABLED(PIDTEMP)
-  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
-  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
+  #define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
+  #define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
   //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with gcode: M301 E[extruder number, 0-2]
 
@@ -569,9 +569,9 @@
     #define DEFAULT_Ki_LIST {   1.08,   1.08 }
     #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
-    #define DEFAULT_Kp  22.20
-    #define DEFAULT_Ki   1.08
-    #define DEFAULT_Kd 114.00
+    #define DEFAULT_Kp  19.0
+    #define DEFAULT_Ki   1.47
+    #define DEFAULT_Kd 61.00
   #endif
 #endif // PIDTEMP
 
@@ -592,7 +592,7 @@
  * heater. If your configuration is significantly different than this and you don't understand
  * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  */
-//#define PIDTEMPBED
+#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
@@ -610,9 +610,9 @@
 
   // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define DEFAULT_bedKp 10.00
-  #define DEFAULT_bedKi .023
-  #define DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 195.13
+  #define DEFAULT_bedKi 29.05
+  #define DEFAULT_bedKd 873.85
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
@@ -787,9 +787,9 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
@@ -885,14 +885,14 @@
  * Override with M92
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 106.09 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 15, 75 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -905,7 +905,7 @@
  * Override with M201
  *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 1500, 1500, 100, 10000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -920,9 +920,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          750    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   750    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -932,7 +932,7 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-//#define CLASSIC_JERK
+#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
   #define DEFAULT_XJERK 10.0
   #define DEFAULT_YJERK 10.0
@@ -972,7 +972,7 @@
  *
  * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
  */
-//#define S_CURVE_ACCELERATION
+#define S_CURVE_ACCELERATION
 
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1022,7 +1022,7 @@
  * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
-//#define PROBE_MANUALLY
+#define PROBE_MANUALLY
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -1278,7 +1278,7 @@
 // @section machine
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
@@ -1288,7 +1288,7 @@
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
-#define INVERT_E0_DIR false
+#define INVERT_E0_DIR true
 #define INVERT_E1_DIR false
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
@@ -1326,16 +1326,16 @@
 // @section machine
 
 // The size of the printable area
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 310
+#define Y_BED_SIZE 310
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS 0
-#define Y_MIN_POS 0
+#define X_MIN_POS -10
+#define Y_MIN_POS -10
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 400
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1375,7 +1375,7 @@
 #endif
 
 #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+  #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
 /**
@@ -1391,10 +1391,11 @@
  * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
  * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  */
-//#define FILAMENT_RUNOUT_SENSOR
+#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
   #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+  #define FIL_RUNOUT_PIN       2
 
   #define FIL_RUNOUT_STATE     LOW        // Pin state indicating that filament is NOT present.
   #define FIL_RUNOUT_PULLUP               // Use internal pullup for filament runout pins.
@@ -1443,7 +1444,7 @@
   // After a runout is detected, continue printing this length of filament
   // before executing the runout script. Useful for a sensor at the end of
   // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
-  //#define FILAMENT_RUNOUT_DISTANCE_MM 25
+  #define FILAMENT_RUNOUT_DISTANCE_MM 5
 
   #ifdef FILAMENT_RUNOUT_DISTANCE_MM
     // Enable this option to use an encoder disc that toggles the runout pin
@@ -1493,7 +1494,7 @@
  */
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
-//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
@@ -1502,7 +1503,7 @@
  * these options to restore the prior leveling state or to always enable
  * leveling immediately after G28.
  */
-//#define RESTORE_LEVELING_AFTER_G28
+#define RESTORE_LEVELING_AFTER_G28
 //#define ENABLE_LEVELING_AFTER_G28
 
 /**
@@ -1532,7 +1533,7 @@
   // The height can be set with M420 Z<height>
   #define ENABLE_LEVELING_FADE_HEIGHT
   #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-    #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
+    #define DEFAULT_LEVELING_FADE_HEIGHT 00.0 // (mm) Default fade height.
   #endif
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
@@ -1544,7 +1545,7 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION
+  #define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
     #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
     #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for G26.
@@ -1560,7 +1561,7 @@
 #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
-  #define GRID_MAX_POINTS_X 3
+  #define GRID_MAX_POINTS_X 5
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Probe along the Y axis, advancing X after each column
@@ -1570,13 +1571,13 @@
 
     // Beyond the probed grid, continue the implied tilt?
     // Default is to maintain the height of the nearest edge.
-    //#define EXTRAPOLATE_BEYOND_GRID
+    #define EXTRAPOLATE_BEYOND_GRID
 
     //
     // Experimental Subdivision of the grid by Catmull-Rom method.
     // Synthesizes intermediate points to produce a more detailed mesh.
     //
-    //#define ABL_BILINEAR_SUBDIVISION
+    #define ABL_BILINEAR_SUBDIVISION
     #if ENABLED(ABL_BILINEAR_SUBDIVISION)
       // Number of subdivisions between probe points
       #define BILINEAR_SUBDIVISIONS 3
@@ -1612,8 +1613,8 @@
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_INSET 5          // Set Mesh bounds as an inset region of the bed
+  #define GRID_MAX_POINTS_X 5    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
@@ -1624,12 +1625,12 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-//#define LCD_BED_LEVELING
+#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
@@ -1781,12 +1782,12 @@
  *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
  *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
  */
-//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of PROGMEM. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
-  //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
+  #define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
 #endif
 
 //
@@ -1837,11 +1838,11 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
   //#define NOZZLE_PARK_X_ONLY          // X move only is required to park
   //#define NOZZLE_PARK_Y_ONLY          // Y move only is required to park
   #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
@@ -2054,7 +2055,7 @@
  * SD Card support is disabled by default. If your controller has an SD slot,
  * you must uncomment the following option or it won't work.
  */
-//#define SDSUPPORT
+#define SDSUPPORT
 
 /**
  * SD CARD: ENABLE CRC
@@ -2124,7 +2125,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 
 //
 // SPEAKER/BUZZER
@@ -2313,7 +2314,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 //
 // K.3D Full Graphic Smart Controller

Marlin/Configuration_adv.h

@@ -238,12 +238,12 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // Degrees Celsius
+  #define THERMAL_PROTECTION_PERIOD 60        // Seconds
+  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
 
-  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
   #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
-    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+    #define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
 
   /**
@@ -259,7 +259,7 @@
    * below 2.
    */
   #define WATCH_TEMP_PERIOD  20               // Seconds
-  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
+  #define WATCH_TEMP_INCREASE 2              // Degrees Celsius
 #endif
 
 /**
@@ -437,9 +437,9 @@
  * Hotend Idle Timeout
  * Prevent filament in the nozzle from charring and causing a critical jam.
  */
-//#define HOTEND_IDLE_TIMEOUT
+#define HOTEND_IDLE_TIMEOUT
 #if ENABLED(HOTEND_IDLE_TIMEOUT)
-  #define HOTEND_IDLE_TIMEOUT_SEC (5*60)    // (seconds) Time without extruder movement to trigger protection
+  #define HOTEND_IDLE_TIMEOUT_SEC (15*60)    // (seconds) Time without extruder movement to trigger protection
   #define HOTEND_IDLE_MIN_TRIGGER   180     // (°C) Minimum temperature to enable hotend protection
   #define HOTEND_IDLE_NOZZLE_TARGET   0     // (°C) Safe temperature for the nozzle after timeout
   #define HOTEND_IDLE_BED_TARGET      0     // (°C) Safe temperature for the bed after timeout
@@ -741,7 +741,7 @@
 
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
 
-//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a Z-MIN endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -971,12 +971,12 @@
 // Backlash Compensation
 // Adds extra movement to axes on direction-changes to account for backlash.
 //
-//#define BACKLASH_COMPENSATION
+#define BACKLASH_COMPENSATION
 #if ENABLED(BACKLASH_COMPENSATION)
   // Define values for backlash distance and correction.
   // If BACKLASH_GCODE is enabled these values are the defaults.
   #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) One value for each linear axis
-  #define BACKLASH_CORRECTION    0.0       // 0.0 = no correction; 1.0 = full correction
+  #define BACKLASH_CORRECTION    0.02       // 0.0 = no correction; 1.0 = full correction
 
   // Add steps for motor direction changes on CORE kinematics
   //#define CORE_BACKLASH
@@ -986,11 +986,11 @@
   //#define BACKLASH_SMOOTHING_MM 3 // (mm)
 
   // Add runtime configuration and tuning of backlash values (M425)
-  //#define BACKLASH_GCODE
+  #define BACKLASH_GCODE
 
   #if ENABLED(BACKLASH_GCODE)
     // Measure the Z backlash when probing (G29) and set with "M425 Z"
-    #define MEASURE_BACKLASH_WHEN_PROBING
+    //#define MEASURE_BACKLASH_WHEN_PROBING
 
     #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
       // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
@@ -1188,7 +1188,7 @@
   #endif
 
   // Include a page of printer information in the LCD Main Menu
-  //#define LCD_INFO_MENU
+  #define LCD_INFO_MENU
   #if ENABLED(LCD_INFO_MENU)
     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
   #endif
@@ -1242,13 +1242,13 @@
   #endif
 
   // Scroll a longer status message into view
-  //#define STATUS_MESSAGE_SCROLLING
+  #define STATUS_MESSAGE_SCROLLING
 
   // On the Info Screen, display XY with one decimal place when possible
   //#define LCD_DECIMAL_SMALL_XY
 
   // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
+  #define LCD_SET_PROGRESS_MANUALLY
 
   // Show the E position (filament used) during printing
   //#define LCD_SHOW_E_TOTAL
@@ -1316,7 +1316,7 @@
 
   //#define MEDIA_MENU_AT_TOP               // Force the media menu to be listed on the top of the main menu
 
-  #define EVENT_GCODE_SD_ABORT "G28XY"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
+  #define EVENT_GCODE_SD_ABORT "M84"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
 
   #if ENABLED(PRINTER_EVENT_LEDS)
     #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
@@ -1330,7 +1330,7 @@
    * an option on the LCD screen to continue the print from the last-known
    * point in the file.
    */
-  //#define POWER_LOSS_RECOVERY
+  #define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
@@ -1396,10 +1396,10 @@
   //#define UTF_FILENAME_SUPPORT
 
   // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  #define LONG_FILENAME_HOST_SUPPORT
 
   // Enable this option to scroll long filenames in the SD card menu
-  //#define SCROLL_LONG_FILENAMES
+  #define SCROLL_LONG_FILENAMES
 
   // Leave the heaters on after Stop Print (not recommended!)
   //#define SD_ABORT_NO_COOLDOWN
@@ -1421,7 +1421,7 @@
   /**
    * Auto-report SdCard status with M27 S<seconds>
    */
-  //#define AUTO_REPORT_SD_STATUS
+  #define AUTO_REPORT_SD_STATUS
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or
@@ -1805,18 +1805,18 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
+  #define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
-  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement).
+  #define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement).
   //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
   //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
   #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
   #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep
 
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
     #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
                                             // Note: Extra time may be added to mitigate controller latency.
@@ -1826,7 +1826,7 @@
     #endif
   #endif
 
-  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
 
   //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
@@ -2153,7 +2153,7 @@
  * Currently handles M108, M112, M410, M876
  * NOTE: Not yet implemented for all platforms.
  */
-//#define EMERGENCY_PARSER
+#define EMERGENCY_PARSER
 
 /**
  * Realtime Reporting (requires EMERGENCY_PARSER)
@@ -2179,10 +2179,10 @@
 // Therefore some clients abort after 30 seconds in a timeout.
 // Some other clients start sending commands while receiving a 'wait'.
 // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
-//#define NO_TIMEOUTS 1000 // Milliseconds
+#define NO_TIMEOUTS 1000 // Milliseconds
 
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
-//#define ADVANCED_OK
+#define ADVANCED_OK
 
 // Printrun may have trouble receiving long strings all at once.
 // This option inserts short delays between lines of serial output.
@@ -2330,7 +2330,7 @@
  *
  * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
   #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
@@ -2368,11 +2368,11 @@
   #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
-  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
-  //#define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change
+  #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  #define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change
 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+  #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  #define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
@@ -3757,10 +3757,10 @@
  * Host Prompt Support enables Marlin to use the host for user prompts so
  * filament runout and other processes can be managed from the host side.
  */
-//#define HOST_ACTION_COMMANDS
+#define HOST_ACTION_COMMANDS
 #if ENABLED(HOST_ACTION_COMMANDS)
-  //#define HOST_PROMPT_SUPPORT
-  //#define HOST_START_MENU_ITEM  // Add a menu item that tells the host to start
+  #define HOST_PROMPT_SUPPORT
+  #define HOST_START_MENU_ITEM  // Add a menu item that tells the host to start
 #endif
 
 /**

Marlin/Version.h

@@ -28,25 +28,25 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "2.0.8"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+#define DETAILED_BUILD_VERSION "IA_" SHORT_BUILD_VERSION
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2019-07-10"
+#define STRING_DISTRIBUTION_DATE "2021-06-05"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#define MACHINE_NAME "Insanity Automation S8"
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +54,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "github.com/InsanityAutomation"
 
 /**
  * Default generic printer UUID.
@@ -65,7 +65,7 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "marlinfw.org"
+//#define WEBSITE_URL "insanityautomation.com"
 
 /**
  * Set the vendor info the serial USB interface, if changable

Marlin/_Bootscreen.h

@@ -0,0 +1,113 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#pragma once
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+/**
+ * Made with Marlin Bitmap Converter
+ * https://marlinfw.org/tools/u8glib/converter.html
+ *
+ * This bitmap from 128x64 C/C++ data
+ */
+
+
+#define HMIJ3S_BMPWIDTH  128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B01111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11110000,B00000000,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00001111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111100,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00001111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111110,B01111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B11111000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00001111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00011111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B00111110,B00000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111001,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11100010,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000011,B11111111,B11000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,
+  B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111100,B00000000,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00111100,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100001,B11000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100111,B11000000,
+  B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11000011,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11011111,B11100001,B10000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
+};