Initial Commit

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

.editorconfig

@@ -4,10 +4,10 @@ root = true
 [{*.patch,syntax_test_*}]
 trim_trailing_whitespace = false
 
-[{*.c,*.cpp,*.h}]
+[{*.c,*.cpp,*.h,*.ino}]
 charset = utf-8
 
-[{*.c,*.cpp,*.h,Makefile}]
+[{*.c,*.cpp,*.h,*.ino,Makefile}]
 trim_trailing_whitespace = true
 insert_final_newline = true
 end_of_line = lf

.gitattributes

@@ -17,3 +17,5 @@
 *.png binary
 *.jpg binary
 *.fon binary
+*.bin binary
+*.woff binary

.github/workflows/test-builds.yml

@@ -36,64 +36,75 @@ jobs:
         # Base Environments
 
         - DUE
+        - DUE_archim
         - esp32
         - linux_native
         - mega2560
+        - at90usb1286_dfu
         - teensy31
         - teensy35
+        - teensy41
         - SAMD51_grandcentral_m4
 
         # Extended AVR Environments
 
-        - FYSETC_F6_13
+        - FYSETC_F6
         - mega1280
         - rambo
         - sanguino1284p
         - sanguino644p
 
-        # Extended STM32 Environments
+        # STM32F1 (Maple) Environments
 
-        - STM32F103RC_btt
-        - STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
+        #- STM32F103RC_btt_maple
+        - STM32F103RC_btt_USB_maple
         - STM32F103RC_fysetc
         - STM32F103RC_meeb
         - jgaurora_a5s_a1
         - STM32F103VE_longer
+        #- mks_robin_maple
+        - mks_robin_lite
+        - mks_robin_pro
+        #- mks_robin_nano35_maple
+        #- STM32F103RET6_creality_maple
+
+        # STM32 (ST) Environments
+
+        - STM32F103RC_btt
+        #- STM32F103RC_btt_USB
+        - STM32F103RE_btt
+        - STM32F103RE_btt_USB
+        - STM32F103RET6_creality
         - STM32F407VE_black
         - STM32F401VE_STEVAL
         - BIGTREE_BTT002
         - BIGTREE_SKR_PRO
         - BIGTREE_GTR_V1_0
         - mks_robin
-        - mks_robin_stm32
         - ARMED
         - FYSETC_S6
+        - STM32F070CB_malyan
         - STM32F070RB_malyan
         - malyan_M300
-        - mks_robin_lite
         - FLYF407ZG
         - rumba32
-        - mks_robin_pro
-        - STM32F103RET6_creality
         - LERDGEX
+        - LERDGEK
         - mks_robin_nano35
+        - NUCLEO_F767ZI
+        - REMRAM_V1
+        - BTT_SKR_SE_BX
+        - chitu_f103
 
         # Put lengthy tests last
 
         - LPC1768
         - LPC1769
 
-        # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
-
-        #- STM32F4
-        #- STM32F7
-
         # Non-working environment tests
         #- at90usb1286_cdc
-        #- at90usb1286_dfu
         #- STM32F103CB_malyan
+        #- STM32F103RE
         #- mks_robin_mini
 
     steps:
@@ -114,8 +125,4 @@ jobs:
 
     - name: Run ${{ matrix.test-platform }} Tests
       run: |
-        # Inline tests script
-        chmod +x buildroot/bin/*
-        chmod +x buildroot/tests/*
-        export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
-        run_tests . ${{ matrix.test-platform }}
+        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}

.gitignore

@@ -19,9 +19,9 @@
 # along with this program.  If not, see <https://www.gnu.org/licenses/>.
 #
 
-# Our automatic versioning scheme generates the following file
-# NEVER put it in the repository
+# Generated files
 _Version.h
+bdf2u8g
 
 #
 # OS
@@ -77,7 +77,6 @@ tags
 *.out
 *.app
 
-
 #
 # C
 #
@@ -123,33 +122,10 @@ tags
 .gcc-flags.json
 /lib/
 
-# Workaround for Deviot+platformio quirks
-Marlin/lib
-Marlin/platformio.ini
-Marlin/*/platformio.ini
-Marlin/*/*/platformio.ini
-Marlin/*/*/*/platformio.ini
-Marlin/*/*/*/*/platformio.ini
-Marlin/.travis.yml
-Marlin/*/.travis.yml
-Marlin/*/*/.travis.yml
-Marlin/*/*/*/.travis.yml
-Marlin/*/*/*/*/.travis.yml
-Marlin/.gitignore
-Marlin/*/.gitignore
-Marlin/*/*/.gitignore
-Marlin/*/*/*/.gitignore
-Marlin/*/*/*/*/.gitignore
-Marlin/readme.txt
-Marlin/*/readme.txt
-Marlin/*/*/readme.txt
-Marlin/*/*/*/readme.txt
-Marlin/*/*/*/*/readme.txt
-
 # Secure Credentials
 Configuration_Secure.h
 
-#Visual Studio
+# Visual Studio
 *.sln
 *.vcxproj
 *.vcxproj.user
@@ -160,27 +136,34 @@ __vm/
 .vs/
 vc-fileutils.settings
 
-#Visual Studio Code
+# Visual Studio Code
 .vscode
 .vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/*.db
 
-#cmake
+# cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
 
-#CLion
+# CLion
 cmake-build-*
 
-#Eclipse
+# Eclipse
 .project
 .cproject
 .pydevproject
 .settings
 .classpath
 
-#Python
+# Python
 __pycache__
+
+# IOLogger logs
+*_log.csv
+
+# Simulation / Native
+eeprom.dat
+imgui.ini

Makefile

@@ -0,0 +1,52 @@
+help:
+	@echo "Tasks for local development:"
+	@echo "* tests-single-ci:             Run a single test from inside the CI"
+	@echo "* tests-single-local:          Run a single test locally"
+	@echo "* tests-single-local-docker:   Run a single test locally, using docker-compose"
+	@echo "* tests-all-local:             Run all tests locally"
+	@echo "* tests-all-local-docker:      Run all tests locally, using docker-compose"
+	@echo "* setup-local-docker:          Setup local docker-compose"
+	@echo ""
+	@echo "Options for testing:"
+	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
+	@echo "                       test. If you set it to ALL it will run all "
+	@echo "                       tests, but some of them are broken: use "
+	@echo "                       tests-all-* instead to run only the ones that "
+	@echo "                       run on GitHub CI"
+	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
+	@echo "                       the index of the test (1-based)"
+	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
+	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
+	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
+.PHONY: help
+
+tests-single-ci:
+	export GIT_RESET_HARD=true
+	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
+.PHONY: tests-single-ci
+
+tests-single-local:
+	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
+	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
+	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
+	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
+.PHONY: tests-single-local
+
+tests-single-local-docker:
+	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
+	docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
+.PHONY: tests-single-local-docker
+
+tests-all-local:
+	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
+	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
+	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
+.PHONY: tests-all-local
+
+tests-all-local-docker:
+	docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
+.PHONY: tests-all-local-docker
+
+setup-local-docker:
+	docker-compose build
+.PHONY: setup-local-docker

Marlin/Makefile

@@ -22,8 +22,10 @@
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
 #     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
-#  3. Set the line containing "MCU" to match your board's processor.
-#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#  3. Set the line containing "MCU" to match your board's processor. Set
+#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
+#     following command to get a list of correspondences: `avrdude -c alf -p x`
+#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
 #     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
 #     change F_CPU to 8000000. If you are using Gen7 electronics, you
 #     probably need to use 20000000. Either way, you must regenerate
@@ -34,18 +36,18 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings at the top of this file can be overriden from
+# Note that all settings at the top of this file can be overridden from
 # the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
 #
 # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
+#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
 #
 # To compile and upload simply add "upload" to the end of the line...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
+#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
 #
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
@@ -57,7 +59,26 @@
 #
 
 # This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 11
+HARDWARE_MOTHERBOARD ?= 1020
+
+ifeq ($(OS),Windows_NT)
+  # Windows
+  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
+  ARDUINO_USER_DIR ?= ${HOME}/Arduino
+else
+  UNAME_S := $(shell uname -s)
+  ifeq ($(UNAME_S),Linux)
+    # Linux
+    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
+    ARDUINO_USER_DIR ?= ${HOME}/Arduino
+  endif
+  ifeq ($(UNAME_S),Darwin)
+    # Darwin (macOS)
+    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
+    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
+    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
+  endif
+endif
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
@@ -67,32 +88,38 @@ ARDUINO_VERSION      ?= 106
 # The installed Libraries are in the User folder
 ARDUINO_USER_DIR ?= ${HOME}/Arduino
 
-# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
+# You can optionally set a path to the avr-gcc tools.
+# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
 AVR_TOOLS_PATH ?=
 
-#Programmer configuration
+# Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0
 
-#Directory used to build files in, contains all the build files, from object files to the final hex file
-#on linux it is best to put an absolute path like /home/username/tmp .
+# Directory used to build files in, contains all the build files, from object
+# files to the final hex file on linux it is best to put an absolute path
+# like /home/username/tmp .
 BUILD_DIR          ?= applet
 
 # This defines whether Liquid_TWI2 support will be built
 LIQUID_TWI2        ?= 0
 
-# this defines if Wire is needed
+# This defines if Wire is needed
 WIRE               ?= 0
 
-# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-U8GLIB             ?= 1
+# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
+# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
+TONE               ?= 1
 
-# this defines whether to include the Trinamic TMCStepper library
-TMC                ?= 1
+# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+U8GLIB             ?= 0
 
-# this defines whether to include the AdaFruit NeoPixel library
+# This defines whether to include the Trinamic TMCStepper library
+TMC                ?= 0
+
+# This defines whether to include the AdaFruit NeoPixel library
 NEOPIXEL           ?= 0
 
 ############
@@ -170,110 +197,115 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (derived from 3Drag Controller)
+# Velleman K8600 Controller (Vertex Nano)
 else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# 2PrintBeta BAM&DICE with STK drivers
+# Velleman K8800 Controller (Vertex Delta)
 else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE Due with STK drivers
+# 2PrintBeta BAM&DICE with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# MKS BASE v1.0
+# 2PrintBeta BAM&DICE Due with STK drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS v1.4 with A4982 stepper drivers
+# MKS BASE v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.5 with Allegro A4982 stepper drivers
+# MKS v1.4 with A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS v1.6 with Allegro A4982 stepper drivers
+# MKS v1.5 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+# MKS v1.6 with Allegro A4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS GEN v1.3 or 1.4
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
 else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN L
+# MKS GEN v1.3 or 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# zrib V2.0 control board (Chinese knock off RAMPS replica)
+# MKS GEN L
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# BigTreeTech or BIQU KFB2.0
+# zrib V2.0 control board (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-  MCU ?= atmega1280
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+  MCU              ?= atmega1280
+  PROG_MCU         ?= m1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Raise3D Rumba
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rapide Lite RL200 Rumba
+# Raise3D Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot T-Rex 2 Plus
+# Rapide Lite RL200 Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.4 Rev 1.1
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Creality: Ender-4, CR-8
+# TriGorilla Anycubic version 1.4 Rev 1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.5
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# Duplicator i3 Plus
+# FYSETC F6 1.5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# VORON
+# Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# TRONXY V3 1.0
+# VORON
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# Z-Bolt X Series
+# TRONXY V3 1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# TT OSCAR
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Overlord/Overlord Pro
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# ADIMLab Gantry v1
+# Overlord/Overlord Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v2
+# ADIMLab Gantry v1
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# BIQU Tango V1
+# ADIMLab Gantry v2
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# MKS GEN L V2
+# BIQU Tango V1
 else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# Copymaster 3D
+# MKS GEN L V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# Ortur 4
+# MKS GEN L V2.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Tenlog D3 Hero
+# Copymaster 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+# Ortur 4
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+# Tenlog D3 Hero
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
 
 #
 # RAMBo and derivatives
@@ -291,6 +323,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # abee Scoovo X9H
 else ifeq ($(HARDWARE_MOTHERBOARD),1205)
+# Rambo ThinkerV2
+else ifeq ($(HARDWARE_MOTHERBOARD),1206)
 
 #
 # Other ATmega1280, ATmega2560
@@ -346,9 +380,11 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1320)
 # Minitronics v1.0/1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1400)
   MCU              ?= atmega1281
+  PROG_MCU         ?= m1281
 # Silvergate v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1401)
   MCU              ?= atmega1281
+  PROG_MCU         ?= m1281
 
 #
 # Sanguinololu and Derivatives - ATmega644P, ATmega1284P
@@ -358,46 +394,57 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401)
 else ifeq ($(HARDWARE_MOTHERBOARD),1500)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Sanguinololu 1.2 and above
 else ifeq ($(HARDWARE_MOTHERBOARD),1501)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Melzi
 else ifeq ($(HARDWARE_MOTHERBOARD),1502)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Melzi V2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi with ATmega1284 (MaKr3d version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1504)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi Creality3D board (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi Malyan M150 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Anet 1.0 (Melzi clone)
 else ifeq ($(HARDWARE_MOTHERBOARD),1510)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 
 #
 # Other ATmega644P, ATmega644, ATmega1284P
@@ -407,50 +454,61 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1510)
 else ifeq ($(HARDWARE_MOTHERBOARD),1600)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen3+
 else ifeq ($(HARDWARE_MOTHERBOARD),1601)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen6
 else ifeq ($(HARDWARE_MOTHERBOARD),1602)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen6 deluxe
 else ifeq ($(HARDWARE_MOTHERBOARD),1603)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen7 custom (Alfons3 Version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1604)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644
+  PROG_MCU         ?= m644
   F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
 else ifeq ($(HARDWARE_MOTHERBOARD),1605)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1606)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1607)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
   F_CPU            ?= 20000000
 # Alpha OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1608)
   HARDWARE_VARIANT ?= SanguinoA
   MCU              ?= atmega644
+  PROG_MCU         ?= m644
 # Final OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1609)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Sethi 3D_1
 else ifeq ($(HARDWARE_MOTHERBOARD),1610)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 
 #
 # Teensyduino - AT90USB1286, AT90USB1286P
@@ -460,51 +518,60 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610)
 else ifeq ($(HARDWARE_MOTHERBOARD),1700)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Printrboard (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1701)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Printrboard Revision F (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1702)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Brainwave (AT90USB646)
 else ifeq ($(HARDWARE_MOTHERBOARD),1703)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb646
+  PROG_MCU         ?= usb646
 # Brainwave Pro (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1704)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # SAV Mk-I (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1705)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Teensy++2.0 (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1706)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # 5DPrint D8 Driver Board
 else ifeq ($(HARDWARE_MOTHERBOARD),1707)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 
 # UltiMachine Archim1 (with DRV8825 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3023)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000L
+  F_CPU             = 84000000
   IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3024)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000L
+  F_CPU             = 84000000
   IS_MCU            = 0
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
 # if you are setting this to something other than 16MHz
+# Do not put the UL suffix, it's done later on.
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
@@ -514,7 +581,8 @@ IS_MCU ?= 1
 ifeq ($(IS_MCU),1)
   # Set to arduino, ATmega2560 if not yet set.
   HARDWARE_VARIANT ?= arduino
-  MCU ?= atmega2560
+  MCU              ?= atmega2560
+  PROG_MCU         ?= m2560
 
   TOOL_PREFIX = avr
   MCU_FLAGS   = -mmcu=$(MCU)
@@ -545,27 +613,36 @@ VPATH += $(BUILD_DIR)
 VPATH += $(HARDWARE_SRC)
 
 ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
+  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
 endif
 
 ifeq ($(IS_MCU),1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
 
+  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
+
 ifeq ($(LIQUID_TWI2), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
+  WIRE   = 1
+  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
 endif
 ifeq ($(WIRE), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
+  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
@@ -637,13 +714,23 @@ ifeq ($(WIRE), 1)
   LIB_CXXSRC += Wire.cpp
 endif
 
+ifeq ($(TONE), 1)
+  LIB_CXXSRC += Tone.cpp
+endif
+
 ifeq ($(U8GLIB), 1)
   LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
+    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
+    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
+    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
+    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
+    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
+    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
@@ -685,17 +772,23 @@ REMOVE = rm -f
 MV = mv -f
 
 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
+CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS  += -DUSB_SERIAL
+  CDEFS      += -DUSB_SERIAL
   LIB_SRC    += usb.c pins_teensy.c
   LIB_CXXSRC += usb_api.cpp
 
 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
+  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
+  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
+
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
+    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
+    PluggableUSB.cpp USBCore.cpp
+
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 
   ifeq ($(U8GLIB), 1)
@@ -721,16 +814,20 @@ CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
 ifneq ($(HARDWARE_MOTHERBOARD),)
   CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
+
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
 CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
 CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
 CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
 ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
+
 ifeq ($(HARDWARE_VARIANT), archim)
   LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
   LD_SUFFIX = $(LDLIBS)
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
+  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
   LD_PREFIX = -Wl,--gc-sections,--relax
   LDFLAGS   = -lm
@@ -746,7 +843,7 @@ else
   AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
   -b$(UPLOAD_RATE)
 
 # Since Marlin 2.0, the source files may be distributed into several
@@ -847,7 +944,7 @@ extcoff: $(TARGET).elf
 
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -861,7 +958,7 @@ extcoff: $(TARGET).elf
 
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
 
 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"
@@ -896,5 +993,5 @@ clean:
 
 .PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
 
-# Automaticaly include the dependency files created by gcc
+# Automatically include the dependency files created by gcc
 -include ${patsubst %.o, %.d, ${OBJ}}

Marlin/Version.h

@@ -28,25 +28,25 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "2.0.8"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+#define DETAILED_BUILD_VERSION "IA_" SHORT_BUILD_VERSION
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2019-07-10"
+#define STRING_DISTRIBUTION_DATE "2021-06-05"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#define MACHINE_NAME "Insanity Automation S8"
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +54,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "github.com/InsanityAutomation"
 
 /**
  * Default generic printer UUID.
@@ -65,7 +65,7 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "https://marlinfw.org"
+//#define WEBSITE_URL "insanityautomation.com"
 
 /**
  * Set the vendor info the serial USB interface, if changable

Marlin/_Bootscreen.h

@@ -0,0 +1,113 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#pragma once
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+/**
+ * Made with Marlin Bitmap Converter
+ * https://marlinfw.org/tools/u8glib/converter.html
+ *
+ * This bitmap from 128x64 C/C++ data
+ */
+
+
+#define HMIJ3S_BMPWIDTH  128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B01111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11110000,B00000000,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00001111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111100,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00001111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111110,B01111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B11111000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00001111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00011111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B00111110,B00000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111001,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11100010,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000011,B11111111,B11000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,
+  B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111100,B00000000,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00111100,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100001,B11000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100111,B11000000,
+  B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11000011,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11011111,B11100001,B10000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/src/HAL/AVR/HAL.cpp

@@ -24,6 +24,13 @@
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
+#ifdef USBCON
+  DefaultSerial1 MSerial0(false, Serial);
+  #ifdef BLUETOOTH
+    BTSerial btSerial(false, bluetoothSerial);
+  #endif
+#endif
+
 // ------------------------
 // Public Variables
 // ------------------------
@@ -51,6 +58,15 @@ void HAL_init() {
   #endif
 }
 
+void HAL_reboot() {
+  #if ENABLED(USE_WATCHDOG)
+    while (1) { /* run out the watchdog */ }
+  #else
+    void (*resetFunc)() = 0;  // Declare resetFunc() at address 0
+    resetFunc();              // Jump to address 0
+  #endif
+}
+
 #if ENABLED(SDSUPPORT)
 
   #include "../../sd/SdFatUtil.h"

Marlin/src/HAL/AVR/HAL.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 
@@ -81,54 +82,51 @@ typedef int8_t pin_t;
 
 // Serial ports
 #ifdef USBCON
-  #if ENABLED(BLUETOOTH)
-    #define MYSERIAL0 bluetoothSerial
-  #else
-    #define MYSERIAL0 Serial
-  #endif
-  #define NUM_SERIAL 1
-#else
-  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #include "../../core/serial_hook.h"
+  typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+  extern DefaultSerial1 MSerial0;
+  #ifdef BLUETOOTH
+    typedef ForwardSerial1Class< decltype(bluetoothSerial) > BTSerial;
+    extern BTSerial btSerial;
   #endif
 
-  #define MYSERIAL0 customizedSerial1
+  #define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
+#else
+  #if !WITHIN(SERIAL_PORT, -1, 3)
+    #error "SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+  #endif
+  #define MYSERIAL1 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
-    #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
     #endif
-    #define MYSERIAL1 customizedSerial2
-    #define NUM_SERIAL 2
-  #else
-    #define NUM_SERIAL 1
+    #define MYSERIAL2 customizedSerial2
+  #endif
+
+  #ifdef SERIAL_PORT_3
+    #if !WITHIN(SERIAL_PORT_3, -1, 3)
+      #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
+    #endif
+    #define MYSERIAL3 customizedSerial3
   #endif
 #endif
 
-#ifdef DGUS_SERIAL_PORT
-  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+#ifdef MMU2_SERIAL_PORT
+  #if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
+    #error "MMU2_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
   #endif
-  #define DGUS_SERIAL internalDgusSerial
-
-  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
+  #define MMU2_SERIAL mmuSerial
 #endif
 
-#ifdef ANYCUBIC_LCD_SERIAL_PORT
-  #if !WITHIN(ANYCUBIC_LCD_SERIAL_PORT, -1, 3)
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #elif ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && ANYCUBIC_LCD_SERIAL_PORT == SERIAL_PORT_2
-    #error "ANYCUBIC_LCD_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+#ifdef LCD_SERIAL_PORT
+  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
+    #error "LCD_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+  #endif
+  #define LCD_SERIAL lcdSerial
+  #if HAS_DGUS_LCD
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
-  #define ANYCUBIC_LCD_SERIAL anycubicLcdSerial
 #endif
 
 // ------------------------
@@ -144,12 +142,18 @@ void HAL_init();
 inline void HAL_clear_reset_source() { MCUSR = 0; }
 inline uint8_t HAL_get_reset_source() { return MCUSR; }
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
-extern "C" {
-  int freeMemory();
-}
-#pragma GCC diagnostic pop
+void HAL_reboot();
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+extern "C" int freeMemory();
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
 #ifdef DIDR2

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -34,17 +34,17 @@
 #include "../../inc/MarlinConfig.h"
 
 void spiBegin() {
-  OUT_WRITE(SS_PIN, HIGH);
-  SET_OUTPUT(SCK_PIN);
-  SET_INPUT(MISO_PIN);
-  SET_OUTPUT(MOSI_PIN);
+  OUT_WRITE(SD_SS_PIN, HIGH);
+  SET_OUTPUT(SD_SCK_PIN);
+  SET_INPUT(SD_MISO_PIN);
+  SET_OUTPUT(SD_MOSI_PIN);
 
   #if DISABLED(SOFTWARE_SPI)
     // SS must be in output mode even it is not chip select
-    //SET_OUTPUT(SS_PIN);
+    //SET_OUTPUT(SD_SS_PIN);
     // set SS high - may be chip select for another SPI device
     //#if SET_SPI_SS_HIGH
-      //WRITE(SS_PIN, HIGH);
+      //WRITE(SD_SS_PIN, HIGH);
     //#endif
     // set a default rate
     spiInit(1);
@@ -88,7 +88,7 @@ void spiBegin() {
   }
 
   /** SPI read data  */
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte-- == 0) return;
     SPDR = 0xFF;
     for (uint16_t i = 0; i < nbyte; i++) {
@@ -107,7 +107,7 @@ void spiBegin() {
   }
 
   /** SPI send block  */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     SPDR = token;
     for (uint16_t i = 0; i < 512; i += 2) {
       while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
@@ -195,19 +195,19 @@ void spiBegin() {
     // no interrupts during byte receive - about 8µs
     cli();
     // output pin high - like sending 0xFF
-    WRITE(MOSI_PIN, HIGH);
+    WRITE(SD_MOSI_PIN, HIGH);
 
     LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
       nop;
 
       data <<= 1;
 
-      if (READ(MISO_PIN)) data |= 1;
+      if (READ(SD_MISO_PIN)) data |= 1;
 
-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
     }
 
     sei();
@@ -215,7 +215,7 @@ void spiBegin() {
   }
 
   // Soft SPI read data
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       buf[i] = spiRec();
   }
@@ -225,10 +225,10 @@ void spiBegin() {
     // no interrupts during byte send - about 8µs
     cli();
     LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, LOW);
-      WRITE(MOSI_PIN, data & 0x80);
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, data & 0x80);
       data <<= 1;
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
     }
 
     nop; // hold SCK high for a few ns
@@ -236,13 +236,13 @@ void spiBegin() {
     nop;
     nop;
 
-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_SCK_PIN, LOW);
 
     sei();
   }
 
   // Soft SPI send block
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     spiSend(token);
     for (uint16_t i = 0; i < 512; i++)
       spiSend(buf[i]);

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -34,6 +34,7 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
+#include "../../core/serial_hook.h"
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -48,11 +49,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
   #else
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -135,10 +136,6 @@
     UART_DECL(3);
   #endif
 
-  #define DEC 10
-  #define HEX 16
-  #define OCT 8
-  #define BIN 2
   #define BYTE 0
 
   // Templated type selector
@@ -202,58 +199,30 @@
     static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
     static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
 
-    public:
-
+  public:
     FORCE_INLINE static void store_rxd_char();
     FORCE_INLINE static void _tx_udr_empty_irq();
 
-    public:
-      MarlinSerial() {};
-      static void begin(const long);
-      static void end();
-      static int peek();
-      static int read();
-      static void flush();
-      static ring_buffer_pos_t available();
-      static void write(const uint8_t c);
-      static void flushTX();
-      #ifdef DGUS_SERIAL_PORT
-        static ring_buffer_pos_t get_tx_buffer_free();
-      #endif
+  public:
+    static void begin(const long);
+    static void end();
+    static int peek();
+    static int read();
+    static void flush();
+    static ring_buffer_pos_t available();
+    static void write(const uint8_t c);
+    static void flushTX();
+    #if HAS_DGUS_LCD
+      static ring_buffer_pos_t get_tx_buffer_free();
+    #endif
 
-      FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
-      FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
-      FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
-      FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
+    enum { HasEmergencyParser = Cfg::EMERGENCYPARSER };
+    static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
 
-      FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-      FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-      FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-      FORCE_INLINE static void print(const char* str) { write(str); }
-
-      static void print(char, int = BYTE);
-      static void print(unsigned char, int = BYTE);
-      static void print(int, int = DEC);
-      static void print(unsigned int, int = DEC);
-      static void print(long, int = DEC);
-      static void print(unsigned long, int = DEC);
-      static void print(double, int = 2);
-
-      static void println(const String& s);
-      static void println(const char[]);
-      static void println(char, int = BYTE);
-      static void println(unsigned char, int = BYTE);
-      static void println(int, int = DEC);
-      static void println(unsigned int, int = DEC);
-      static void println(long, int = DEC);
-      static void println(unsigned long, int = DEC);
-      static void println(double, int = 2);
-      static void println();
-      operator bool() { return true; }
-
-    private:
-      static void printNumber(unsigned long, const uint8_t);
-      static void printFloat(double, uint8_t);
+    FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
+    FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
+    FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
+    FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
   };
 
   template <uint8_t serial>
@@ -268,68 +237,61 @@
     static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
     static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
   };
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
+  extern MSerialT1 customizedSerial1;
 
   #ifdef SERIAL_PORT_2
+    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
+    extern MSerialT2 customizedSerial2;
+  #endif
 
-    extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
+  #ifdef SERIAL_PORT_3
+    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
+    extern MSerialT3 customizedSerial3;
   #endif
 
 #endif // !USBCON
 
-#ifdef INTERNAL_SERIAL_PORT
+#ifdef MMU2_SERIAL_PORT
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct MMU2SerialCfg {
     static constexpr int PORT               = serial;
     static constexpr unsigned int RX_SIZE   = 32;
     static constexpr unsigned int TX_SIZE   = 32;
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
+    static constexpr bool RX_OVERRUNS       = false;
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
+  extern MSerialMMU2 mmuSerial;
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
+
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct LCDSerialCfg {
     static constexpr int PORT               = serial;
-    static constexpr unsigned int RX_SIZE   = DGUS_RX_BUFFER_SIZE;
-    static constexpr unsigned int TX_SIZE   = DGUS_TX_BUFFER_SIZE;
+    static constexpr unsigned int RX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_RX_BUFFER_SIZE,  64);
+    static constexpr unsigned int TX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_TX_BUFFER_SIZE, 128);
     static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = false;
+    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
+    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
-#endif
-
-#ifdef ANYCUBIC_LCD_SERIAL_PORT
-  template <uint8_t serial>
-  struct AnycubicLcdSerialCfg {
-    static constexpr int PORT               = serial;
-    static constexpr unsigned int RX_SIZE   = 64;
-    static constexpr unsigned int TX_SIZE   = 128;
-    static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = false;
-    static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = false;
-    static constexpr bool RX_FRAMING_ERRORS = false;
-    static constexpr bool MAX_RX_QUEUED     = false;
-  };
-
-  extern MarlinSerial<AnycubicLcdSerialCfg<ANYCUBIC_LCD_SERIAL_PORT>> anycubicLcdSerial;
+  typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;
+  extern MSerialLCD lcdSerial;
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations
 #if defined(USBCON) && ENABLED(BLUETOOTH)
-  extern HardwareSerial bluetoothSerial;
+  typedef Serial1Class<HardwareSerial> MSerialBT;
+  extern MSerialBT bluetoothSerial;
 #endif

Marlin/src/HAL/AVR/Servo.cpp

@@ -48,7 +48,6 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
- *
  */
 
 #ifdef __AVR__

Marlin/src/HAL/AVR/ServoTimers.h

@@ -59,10 +59,12 @@
 // Say which 16 bit timers can be used and in what order
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define _useTimer1
-  #define _useTimer3
   #define _useTimer4
-  #if !HAS_MOTOR_CURRENT_PWM
-    #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
+  #if NUM_SERVOS > SERVOS_PER_TIMER
+    #define _useTimer3
+    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
+      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
+    #endif
   #endif
 #elif defined(__AVR_ATmega32U4__)
   #define _useTimer3

Marlin/src/HAL/AVR/eeprom.cpp

@@ -40,13 +40,13 @@ bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
       if (eeprom_read_byte(p) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -59,7 +59,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -124,7 +124,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X_MAX_PIN);
     #endif
   #endif
@@ -132,7 +132,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X_MIN_PIN);
     #endif
   #endif
@@ -140,7 +140,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y_MAX_PIN);
     #endif
   #endif
@@ -148,7 +148,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y_MIN_PIN);
     #endif
   #endif
@@ -156,7 +156,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MAX_PIN);
     #endif
   #endif
@@ -164,15 +164,60 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MIN_PIN);
     #endif
   #endif
+  #if HAS_I_MAX
+    #if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
+      pciSetup(I_MAX_PIN);
+    #endif
+  #elif HAS_I_MIN
+    #if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
+      pciSetup(I_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_J_MAX
+    #if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
+      pciSetup(J_MAX_PIN);
+    #endif
+  #elif HAS_J_MIN
+    #if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
+      pciSetup(J_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_K_MAX
+    #if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
+      pciSetup(K_MAX_PIN);
+    #endif
+  #elif HAS_K_MIN
+    #if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
+      pciSetup(K_MIN_PIN);
+    #endif
+  #endif
   #if HAS_X2_MAX
     #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X2_MAX_PIN);
     #endif
   #endif
@@ -180,7 +225,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X2_MIN_PIN);
     #endif
   #endif
@@ -188,7 +233,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y2_MAX_PIN);
     #endif
   #endif
@@ -196,7 +241,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y2_MIN_PIN);
     #endif
   #endif
@@ -204,7 +249,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z2_MAX_PIN);
     #endif
   #endif
@@ -212,7 +257,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z2_MIN_PIN);
     #endif
   #endif
@@ -220,7 +265,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z3_MAX_PIN);
     #endif
   #endif
@@ -228,7 +273,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z3_MIN_PIN);
     #endif
   #endif
@@ -236,7 +281,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z4_MAX_PIN);
     #endif
   #endif
@@ -244,7 +289,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z4_MIN_PIN);
     #endif
   #endif
@@ -252,10 +297,9 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PROBE_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif
-
   // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -185,8 +185,8 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
         res_temp_phase_correct = rtf / 2;
       }
 
-      LIMIT(res_temp_fast, 1u, size);
-      LIMIT(res_temp_phase_correct, 1u, size);
+      LIMIT(res_temp_fast, 1U, size);
+      LIMIT(res_temp_phase_correct, 1U, size);
       // Calculate frequencies of test prescaler and resolution values
       const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
                 f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),

Marlin/src/HAL/AVR/fastio.cpp

@@ -241,7 +241,7 @@ uint8_t extDigitalRead(const int8_t pin) {
  *
  * DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
  */
-uint16_t set_pwm_frequency_hz(const float &hz, const float dca, const float dcb, const float dcc) {
+uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
   float count = 0;
   if (hz > 0 && (dca || dcb || dcc)) {
     count = float(F_CPU) / hz;            // 1x prescaler, TOP for 16MHz base freq.

Marlin/src/HAL/AVR/fastio.h

@@ -29,11 +29,17 @@
 
 #include <avr/io.h>
 
-#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
-#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
-#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
-#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
-#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
+#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
+  #define AVR_AT90USB1286_FAMILY 1
+#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
+  #define AVR_ATmega1284_FAMILY 1
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+  #define AVR_ATmega2560_FAMILY 1
+#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
+  #define AVR_ATmega2561_FAMILY 1
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
+  #define AVR_ATmega328_FAMILY 1
+#endif
 
 /**
  * Include Ports and Functions
@@ -279,7 +285,7 @@ enum ClockSource2 : char {
  */
 
 // Determine which harware PWMs are already in use
-#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
+#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
 #if PIN_EXISTS(CONTROLLER_FAN)
   #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
 #else

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -36,9 +36,10 @@
  * Sanity checks for Spindle / Laser PWM
  */
 #if ENABLED(SPINDLE_LASER_PWM)
+  #include "../ServoTimers.h"   // Needed to check timer availability (_useTimer3)
   #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-  #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+  #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
   #endif
 #elif defined(SPINDLE_LASER_FREQUENCY)
@@ -55,3 +56,10 @@
 #if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
+
+/**
+ * Postmortem debugging
+ */
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  #error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
+#endif

Marlin/src/HAL/AVR/pinsDebug.h

@@ -26,7 +26,9 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
+#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+  #define AVR_ATmega2560_FAMILY_PLUS_70 1
+#endif
 
 #if AVR_AT90USB1286_FAMILY
 
@@ -36,7 +38,7 @@
   // portModeRegister takes a different argument
   #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
   #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
@@ -233,8 +235,8 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
 
 inline void com_print(const uint8_t N, const uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
-  SERIAL_ECHOPGM("    COM");
-  SERIAL_CHAR('0' + N, Z);
+  SERIAL_ECHOPAIR("    COM", AS_CHAR('0' + N));
+  SERIAL_CHAR(Z);
   SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
 }
 
@@ -245,8 +247,8 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
   if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
 
-  SERIAL_ECHOPGM("    TIMER");
-  SERIAL_CHAR(T + '0', L);
+  SERIAL_ECHOPAIR("    TIMER", AS_CHAR(T + '0'));
+  SERIAL_CHAR(L);
   SERIAL_ECHO_SP(3);
 
   if (N == 3) {
@@ -260,19 +262,11 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   SERIAL_ECHOPAIR("    WGM: ", WGM);
   com_print(T,L);
   SERIAL_ECHOPAIR("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
-
-  SERIAL_ECHOPGM("    TCCR");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR("A: ", *TCCRA);
-
-  SERIAL_ECHOPGM("    TCCR");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR("B: ", *TCCRB);
+  SERIAL_ECHOPAIR("    TCCR", AS_CHAR(T + '0'), "A: ", *TCCRA);
+  SERIAL_ECHOPAIR("    TCCR", AS_CHAR(T + '0'), "B: ", *TCCRB);
 
   const uint8_t *TMSK = (uint8_t*)TIMSK(T);
-  SERIAL_ECHOPGM("    TIMSK");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR(": ", *TMSK);
+  SERIAL_ECHOPAIR("    TIMSK", AS_CHAR(T + '0'), ": ", *TMSK);
 
   const uint8_t OCIE = L - 'A' + 1;
   if (N == 3) { if (WGM == 0 || WGM == 2 || WGM ==  4 || WGM ==  6) err_is_counter(); }

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -22,15 +22,12 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#undef NUM_DIGITAL_PINS
-#if MB(BQ_ZUM_MEGA_3D)
+#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
-#elif MB(MINIRAMBO)
-  #define NUM_DIGITAL_PINS            85
-#elif MB(SCOOVO_X9H)
-  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/AVR/spi_pins.h

@@ -51,15 +51,15 @@
   #define AVR_SS_PIN   16
 #endif
 
-#ifndef SCK_PIN
-  #define SCK_PIN  AVR_SCK_PIN
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  AVR_SCK_PIN
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN AVR_MISO_PIN
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN AVR_MISO_PIN
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN AVR_MOSI_PIN
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN AVR_MOSI_PIN
 #endif
-#ifndef SS_PIN
-  #define SS_PIN   AVR_SS_PIN
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/AVR/timers.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -57,7 +57,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/DebugMonitor.cpp

@@ -1,342 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../core/macros.h"
-#include "../../core/serial.h"
-
-#include "../shared/backtrace/unwinder.h"
-#include "../shared/backtrace/unwmemaccess.h"
-
-#include <stdarg.h>
-
-// Debug monitor that dumps to the Programming port all status when
-// an exception or WDT timeout happens - And then resets the board
-
-// All the Monitor routines must run with interrupts disabled and
-// under an ISR execution context. That is why we cannot reuse the
-// Serial interrupt routines or any C runtime, as we don't know the
-// state we are when running them
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() __asm__ volatile("": : :"memory");
-
-// (re)initialize UART0 as a monitor output to 250000,n,8,1
-static void TXBegin() {
-
-  // Disable UART interrupt in NVIC
-  NVIC_DisableIRQ( UART_IRQn );
-
-  // We NEED memory barriers to ensure Interrupts are actually disabled!
-  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
-  __DSB();
-  __ISB();
-
-  // Disable clock
-  pmc_disable_periph_clk( ID_UART );
-
-  // Configure PMC
-  pmc_enable_periph_clk( ID_UART );
-
-  // Disable PDC channel
-  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
-
-  // Reset and disable receiver and transmitter
-  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
-
-  // Configure mode: 8bit, No parity, 1 bit stop
-  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
-
-  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
-  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
-
-  // Enable receiver and transmitter
-  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
-}
-
-// Send character through UART with no interrupts
-static void TX(char c) {
-  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
-  UART->UART_THR = c;
-}
-
-// Send String through UART
-static void TX(const char* s) {
-  while (*s) TX(*s++);
-}
-
-static void TXDigit(uint32_t d) {
-  if (d < 10) TX((char)(d+'0'));
-  else if (d < 16) TX((char)(d+'A'-10));
-  else TX('?');
-}
-
-// Send Hex number thru UART
-static void TXHex(uint32_t v) {
-  TX("0x");
-  for (uint8_t i = 0; i < 8; i++, v <<= 4)
-    TXDigit((v >> 28) & 0xF);
-}
-
-// Send Decimal number thru UART
-static void TXDec(uint32_t v) {
-  if (!v) {
-    TX('0');
-    return;
-  }
-
-  char nbrs[14];
-  char *p = &nbrs[0];
-  while (v != 0) {
-    *p++ = '0' + (v % 10);
-    v /= 10;
-  }
-  do {
-    p--;
-    TX(*p);
-  } while (p != &nbrs[0]);
-}
-
-// Dump a backtrace entry
-static bool UnwReportOut(void* ctx, const UnwReport* bte) {
-  int* p = (int*)ctx;
-
-  (*p)++;
-  TX('#'); TXDec(*p); TX(" : ");
-  TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
-  TX('+'); TXDec(bte->address - bte->function);
-  TX(" PC:");TXHex(bte->address); TX('\n');
-  return true;
-}
-
-#ifdef UNW_DEBUG
-  void UnwPrintf(const char* format, ...) {
-    char dest[256];
-    va_list argptr;
-    va_start(argptr, format);
-    vsprintf(dest, format, argptr);
-    va_end(argptr);
-    TX(&dest[0]);
-  }
-#endif
-
-/* Table of function pointers for passing to the unwinder */
-static const UnwindCallbacks UnwCallbacks = {
-  UnwReportOut,
-  UnwReadW,
-  UnwReadH,
-  UnwReadB
-  #ifdef UNW_DEBUG
-   , UnwPrintf
-  #endif
-};
-
-/**
- * HardFaultHandler_C:
- * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
- * as the parameter. We can then read the values from the stack and place them
- * into local variables for ease of reading.
- * We then read the various Fault Status and Address Registers to help decode
- * cause of the fault.
- * The function ends with a BKPT instruction to force control back into the debugger
- */
-extern "C"
-void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
-
-  static const char* causestr[] = {
-    "NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
-  };
-
-  UnwindFrame btf;
-
-  // Dump report to the Programming port (interrupts are DISABLED)
-  TXBegin();
-  TX("\n\n## Software Fault detected ##\n");
-  TX("Cause: "); TX(causestr[cause]); TX('\n');
-
-  TX("R0   : "); TXHex(((unsigned long)sp[0])); TX('\n');
-  TX("R1   : "); TXHex(((unsigned long)sp[1])); TX('\n');
-  TX("R2   : "); TXHex(((unsigned long)sp[2])); TX('\n');
-  TX("R3   : "); TXHex(((unsigned long)sp[3])); TX('\n');
-  TX("R12  : "); TXHex(((unsigned long)sp[4])); TX('\n');
-  TX("LR   : "); TXHex(((unsigned long)sp[5])); TX('\n');
-  TX("PC   : "); TXHex(((unsigned long)sp[6])); TX('\n');
-  TX("PSR  : "); TXHex(((unsigned long)sp[7])); TX('\n');
-
-  // Configurable Fault Status Register
-  // Consists of MMSR, BFSR and UFSR
-  TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
-
-  // Hard Fault Status Register
-  TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
-
-  // Debug Fault Status Register
-  TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
-
-  // Auxiliary Fault Status Register
-  TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
-
-  // Read the Fault Address Registers. These may not contain valid values.
-  // Check BFARVALID/MMARVALID to see if they are valid values
-  // MemManage Fault Address Register
-  TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
-
-  // Bus Fault Address Register
-  TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
-
-  TX("ExcLR: "); TXHex(lr); TX('\n');
-  TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
-
-  btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
-  btf.fp = btf.sp;
-  btf.lr = ((unsigned long)sp[5]);
-  btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
-
-  // Perform a backtrace
-  TX("\nBacktrace:\n\n");
-  int ctr = 0;
-  UnwindStart(&btf, &UnwCallbacks, &ctr);
-
-  // Disable all NVIC interrupts
-  NVIC->ICER[0] = 0xFFFFFFFF;
-  NVIC->ICER[1] = 0xFFFFFFFF;
-
-  // Relocate VTOR table to default position
-  SCB->VTOR = 0;
-
-  // Disable USB
-  otg_disable();
-
-  // Restart watchdog
-  WDT_Restart(WDT);
-
-  // Reset controller
-  NVIC_SystemReset();
-  for (;;) WDT_Restart(WDT);
-}
-
-__attribute__((naked)) void NMI_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#0")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void HardFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#1")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void MemManage_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#2")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void BusFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#3")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void UsageFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#4")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void DebugMon_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#5")
-    A("b HardFault_HandlerC")
-  );
-}
-
-/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
-__attribute__((naked)) void WDT_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#6")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void RSTC_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#7")
-    A("b HardFault_HandlerC")
-  );
-}
-
-#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.cpp

@@ -19,9 +19,7 @@
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL for Arduino Due and compatible (SAM3X8E)
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -42,6 +40,8 @@ uint16_t HAL_adc_result;
 // Public functions
 // ------------------------
 
+TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
+
 // HAL initialization task
 void HAL_init() {
   // Initialize the USB stack
@@ -49,6 +49,7 @@ void HAL_init() {
     OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();
+  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
 }
 
 // HAL idle task
@@ -76,6 +77,8 @@ uint8_t HAL_get_reset_source() {
   }
 }
 
+void HAL_reboot() { rstc_start_software_reset(RSTC); }
+
 void _delay_ms(const int delay_ms) {
   // Todo: port for Due?
   delay(delay_ms);
@@ -104,4 +107,18 @@ uint16_t HAL_adc_get_result() {
   return HAL_adc_result;
 }
 
+// Forward the default serial ports
+#if USING_HW_SERIAL0
+  DefaultSerial1 MSerial0(false, Serial);
+#endif
+#if USING_HW_SERIAL1
+  DefaultSerial2 MSerial1(false, Serial1);
+#endif
+#if USING_HW_SERIAL2
+  DefaultSerial3 MSerial2(false, Serial2);
+#endif
+#if USING_HW_SERIAL3
+  DefaultSerial4 MSerial3(false, Serial3);
+#endif
+
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.h

@@ -22,9 +22,7 @@
 #pragma once
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL for Arduino Due and compatible (SAM3X8E)
  */
 
 #define CPU_32_BIT
@@ -38,59 +36,61 @@
 
 #include <stdint.h>
 
-// Define MYSERIAL0/1 before MarlinSerial includes!
+#include "../../core/serial_hook.h"
+
+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
+
 #if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL0 customizedSerial1
-#elif SERIAL_PORT == 0
-  #define MYSERIAL0 Serial
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
+  #define MYSERIAL1 customizedSerial1
+#elif WITHIN(SERIAL_PORT, 0, 3)
+  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL1 customizedSerial2
-  #elif SERIAL_PORT_2 == 0
-    #define MYSERIAL1 Serial
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 Serial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 Serial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 Serial3
+  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL2 customizedSerial2
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
+    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL internalDgusSerial
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL Serial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL Serial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL Serial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL Serial3
+#ifdef SERIAL_PORT_3
+  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL3 customizedSerial3
+  #elif WITHIN(SERIAL_PORT_3, 0, 3)
+    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #else
+    #error "MMU2_SERIAL_PORT must be from 0 to 3."
+  #endif
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #else
+    #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
 #endif
 
@@ -100,16 +100,6 @@
 // On AVR this is in math.h?
 #define square(x) ((x)*(x))
 
-#ifndef strncpy_P
-  #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
-#endif
-
-// Fix bug in pgm_read_ptr
-#undef pgm_read_ptr
-#define pgm_read_ptr(addr) (*((void**)(addr)))
-#undef pgm_read_word
-#define pgm_read_word(addr) (*((uint16_t*)(addr)))
-
 typedef int8_t pin_t;
 
 #define SHARED_SERVOS HAS_SERVOS
@@ -130,13 +120,15 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
+void HAL_reboot();
+
 //
 // ADC
 //
 extern uint16_t HAL_adc_result;     // result of last ADC conversion
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
+  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
 #endif
 
 #define HAL_ANALOG_SELECT(ch)
@@ -176,10 +168,16 @@ void HAL_init();
 //
 void _delay_ms(const int delay);
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 #ifdef __cplusplus
   extern "C" {

Marlin/src/HAL/DUE/HAL_MinSerial.cpp

@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+
+#include "../shared/HAL_MinSerial.h"
+
+#include <stdarg.h>
+
+static void TXBegin() {
+  // Disable UART interrupt in NVIC
+  NVIC_DisableIRQ( UART_IRQn );
+
+  // We NEED memory barriers to ensure Interrupts are actually disabled!
+  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
+  __DSB();
+  __ISB();
+
+  // Disable clock
+  pmc_disable_periph_clk( ID_UART );
+
+  // Configure PMC
+  pmc_enable_periph_clk( ID_UART );
+
+  // Disable PDC channel
+  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
+
+  // Reset and disable receiver and transmitter
+  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
+
+  // Configure mode: 8bit, No parity, 1 bit stop
+  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
+
+  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
+  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
+
+  // Enable receiver and transmitter
+  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
+}
+
+// A SW memory barrier, to ensure GCC does not overoptimize loops
+#define sw_barrier() __asm__ volatile("": : :"memory");
+static void TX(char c) {
+  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
+  UART->UART_THR = c;
+}
+
+void install_min_serial() {
+  HAL_min_serial_init = &TXBegin;
+  HAL_min_serial_out = &TX;
+}
+
+#if DISABLED(DYNAMIC_VECTORTABLE)
+extern "C" {
+  __attribute__((naked)) void JumpHandler_ASM() {
+    __asm__ __volatile__ (
+      "b CommonHandler_ASM\n"
+    );
+  }
+  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
+}
+#endif
+
+#endif // POSTMORTEM_DEBUGGING
+#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -30,7 +30,7 @@
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ * HAL for Arduino Due and compatible (SAM3X8E)
  *
  * For ARDUINO_ARCH_SAM
  */
@@ -56,8 +56,8 @@
   #pragma GCC optimize (3)
 
   typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
-  typedef void    (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
-  typedef void    (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
+  typedef void    (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
+  typedef void    (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
 
   /* ---------------- Macros to be able to access definitions from asm */
   #define _PORT(IO) DIO ##  IO ## _WPORT
@@ -69,10 +69,10 @@
 
   // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
   static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
     uint32_t idx = 0;
 
     /* Negate bout, as the assembler requires a negated value */
@@ -154,9 +154,9 @@
   static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -225,36 +225,36 @@
   static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
       b <<= 1;        // little setup time
 
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
       DELAY_NS(125);  // 10 cycles @ 84mhz
 
-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);
 
-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
       DELAY_NS(125);  // 10 cycles @ 84mhz
     } while (--bits);
     return b;
   }
 
   // all the others
-  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz
+  static uint32_t spiDelayCyclesX4 = 4 * (F_CPU) / 1000000; // 4µs => 125khz
 
   static uint8_t spiTransferX(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
       b <<= 1; // little setup time
 
-      WRITE(SCK_PIN, HIGH);
-      __delay_4cycles(spiDelayCyclesX4);
+      WRITE(SD_SCK_PIN, HIGH);
+      DELAY_CYCLES(spiDelayCyclesX4);
 
-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);
 
-      WRITE(SCK_PIN, LOW);
-      __delay_4cycles(spiDelayCyclesX4);
+      WRITE(SD_SCK_PIN, LOW);
+      DELAY_CYCLES(spiDelayCyclesX4);
     } while (--bits);
     return b;
   }
@@ -270,11 +270,11 @@
   static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
 
   // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
-  static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+  static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
     uint32_t work = 0;
     uint32_t txval = 0;
 
@@ -349,12 +349,12 @@
     );
   }
 
-  static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
+  static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -425,13 +425,13 @@
     );
   }
 
-  static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
+  static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
     do {
       (void)spiTransferTx(*buf++);
     } while (--todo);
   }
 
-  static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
+  static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
     do {
       *buf++ = spiTransferRx(0xFF);
     } while (--todo);
@@ -442,31 +442,31 @@
   static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
 
   #if MB(ALLIGATOR)
-    #define _SS_WRITE(S) WRITE(SS_PIN, S)
+    #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
   #else
     #define _SS_WRITE(S) NOOP
   #endif
 
   void spiBegin() {
-    SET_OUTPUT(SS_PIN);
+    SET_OUTPUT(SD_SS_PIN);
     _SS_WRITE(HIGH);
-    SET_OUTPUT(SCK_PIN);
-    SET_INPUT(MISO_PIN);
-    SET_OUTPUT(MOSI_PIN);
+    SET_OUTPUT(SD_SCK_PIN);
+    SET_INPUT(SD_MISO_PIN);
+    SET_OUTPUT(SD_MOSI_PIN);
   }
 
   uint8_t spiRec() {
     _SS_WRITE(LOW);
-    WRITE(MOSI_PIN, HIGH); // Output 1s 1
+    WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
     uint8_t b = spiTransferRx(0xFF);
     _SS_WRITE(HIGH);
     return b;
   }
 
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte) {
       _SS_WRITE(LOW);
-      WRITE(MOSI_PIN, HIGH); // Output 1s 1
+      WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
       spiRxBlock(buf, nbyte);
       _SS_WRITE(HIGH);
     }
@@ -478,7 +478,7 @@
     _SS_WRITE(HIGH);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     _SS_WRITE(LOW);
     (void)spiTransferTx(token);
     spiTxBlock(buf, 512);
@@ -510,7 +510,7 @@
         spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
         break;
       default:
-        spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate);
+        spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate) << 2; // spiRate of 2 gives the maximum error with current CPU
         spiTransferTx = (pfnSpiTransfer)spiTransferX;
         spiTransferRx = (pfnSpiTransfer)spiTransferX;
         spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
@@ -519,8 +519,8 @@
     }
 
     _SS_WRITE(HIGH);
-    WRITE(MOSI_PIN, HIGH);
-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_MOSI_PIN, HIGH);
+    WRITE(SD_SCK_PIN, LOW);
   }
 
   /** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,27 +575,27 @@
 
       // Configure SPI pins
       PIO_Configure(
-         g_APinDescription[SCK_PIN].pPort,
-         g_APinDescription[SCK_PIN].ulPinType,
-         g_APinDescription[SCK_PIN].ulPin,
-         g_APinDescription[SCK_PIN].ulPinConfiguration);
+         g_APinDescription[SD_SCK_PIN].pPort,
+         g_APinDescription[SD_SCK_PIN].ulPinType,
+         g_APinDescription[SD_SCK_PIN].ulPin,
+         g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[MOSI_PIN].pPort,
-         g_APinDescription[MOSI_PIN].ulPinType,
-         g_APinDescription[MOSI_PIN].ulPin,
-         g_APinDescription[MOSI_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MOSI_PIN].pPort,
+         g_APinDescription[SD_MOSI_PIN].ulPinType,
+         g_APinDescription[SD_MOSI_PIN].ulPin,
+         g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[MISO_PIN].pPort,
-         g_APinDescription[MISO_PIN].ulPinType,
-         g_APinDescription[MISO_PIN].ulPin,
-         g_APinDescription[MISO_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MISO_PIN].pPort,
+         g_APinDescription[SD_MISO_PIN].ulPinType,
+         g_APinDescription[SD_MISO_PIN].ulPin,
+         g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
 
       // set master mode, peripheral select, fault detection
       SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
       SPI_Enable(SPI0);
 
       SET_OUTPUT(DAC0_SYNC);
-      #if EXTRUDERS > 1
+      #if HAS_MULTI_EXTRUDER
         SET_OUTPUT(DAC1_SYNC);
         WRITE(DAC1_SYNC, HIGH);
       #endif
@@ -606,7 +606,7 @@
       WRITE(SPI_EEPROM1_CS, HIGH);
       WRITE(SPI_EEPROM2_CS, HIGH);
       WRITE(SPI_FLASH_CS, HIGH);
-      WRITE(SS_PIN, HIGH);
+      WRITE(SD_SS_PIN, HIGH);
 
       OUT_WRITE(SDSS, LOW);
 
@@ -645,7 +645,7 @@
     }
 
     // Read from SPI into buffer
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (int i = 0; i < nbyte; i++) {
@@ -668,7 +668,7 @@
       //DELAY_US(1U);
     }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -689,7 +689,7 @@
       FLUSH_RX();
     }
 
-    void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
+    void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -702,7 +702,7 @@
     }
 
     // Write from buffer to SPI
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
       WHILE_TX(0);
       //WHILE_RX(0);
@@ -759,7 +759,6 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
-     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)
@@ -802,19 +801,19 @@
 
     uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
 
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       for (int i = 0; i < nbyte; i++)
         buf[i] = spiTransfer(0xFF);
     }
 
     void spiSend(uint8_t data) { spiTransfer(data); }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       for (uint16_t i = 0; i < nbyte; i++)
         spiTransfer(buf[i]);
     }
 
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       spiTransfer(token);
       for (uint16_t i = 0; i < 512; i++)
         spiTransfer(buf[i]);

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -382,7 +382,7 @@ void MarlinSerial<Cfg>::flush() {
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::write(const uint8_t c) {
+size_t MarlinSerial<Cfg>::write(const uint8_t c) {
   _written = true;
 
   if (Cfg::TX_SIZE == 0) {
@@ -400,7 +400,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
     // XOFF char at the RX isr, but it is properly handled there
     if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) {
       HWUART->UART_THR = c;
-      return;
+      return 1;
     }
 
     const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
@@ -428,6 +428,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
     // Enable TX isr - Non atomic, but it will eventually enable TX isr
     HWUART->UART_IER = UART_IER_TXRDY;
   }
+  return 1;
 }
 
 template<typename Cfg>
@@ -473,169 +474,21 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-/**
- * Imports from print.h
- */
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(char c, int base) {
-  print((long)c, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(int n, int base) {
-  print((long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(long n, int base) {
-  if (base == 0) write(n);
-  else if (base == 10) {
-    if (n < 0) { print('-'); n = -n; }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println() {
-  print('\r');
-  print('\n');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const String& s) {
-  print(s);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const char c[]) {
-  print(c);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-template<typename Cfg>
-void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
-}
 
 // If not using the USB port as serial port
-#if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
+  MSerialT1 customizedSerial1(MarlinSerialCfg<SERIAL_PORT>::EMERGENCYPARSER);
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> >;
+  MSerialT2 customizedSerial2(MarlinSerialCfg<SERIAL_PORT_2>::EMERGENCYPARSER);
+#endif
+
+#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> >;
+  MSerialT3 customizedSerial3(MarlinSerialCfg<SERIAL_PORT_3>::EMERGENCYPARSER);
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -30,11 +30,7 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
-
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
+#include "../../core/serial_hook.h"
 
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
@@ -119,42 +115,15 @@ public:
   static int read();
   static void flush();
   static ring_buffer_pos_t available();
-  static void write(const uint8_t c);
+  static size_t write(const uint8_t c);
   static void flushTX();
 
+  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
   FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
   FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
-
-  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-  FORCE_INLINE static void print(const char* str) { write(str); }
-
-  static void print(char, int = 0);
-  static void print(unsigned char, int = 0);
-  static void print(int, int = DEC);
-  static void print(unsigned int, int = DEC);
-  static void print(long, int = DEC);
-  static void print(unsigned long, int = DEC);
-  static void print(double, int = 2);
-
-  static void println(const String& s);
-  static void println(const char[]);
-  static void println(char, int = 0);
-  static void println(unsigned char, int = 0);
-  static void println(int, int = DEC);
-  static void println(unsigned int, int = DEC);
-  static void println(long, int = DEC);
-  static void println(unsigned long, int = DEC);
-  static void println(double, int = 2);
-  static void println();
-  operator bool() { return true; }
-
-private:
-  static void printNumber(unsigned long, const uint8_t);
-  static void printFloat(double, uint8_t);
 };
 
 // Serial port configuration
@@ -171,10 +140,17 @@ struct MarlinSerialCfg {
   static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
 };
 
-#if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
+  extern MSerialT1 customizedSerial1;
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
+  extern MSerialT2 customizedSerial2;
+#endif
+
+#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
+  extern MSerialT3 customizedSerial3;
 #endif

Marlin/src/HAL/DUE/MarlinSerialUSB.cpp

@@ -19,13 +19,13 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#ifdef ARDUINO_ARCH_SAM
 
 /**
  * MarlinSerial_Due.cpp - Hardware serial library for Arduino DUE
  * Copyright (c) 2017 Eduardo José Tagle. All right reserved
  * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
  */
-#ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 
@@ -33,10 +33,6 @@
 
 #include "MarlinSerialUSB.h"
 
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-
 // Imports from Atmel USB Stack/CDC implementation
 extern "C" {
   bool usb_task_cdc_isenabled();
@@ -50,10 +46,6 @@ extern "C" {
 // Pending character
 static int pending_char = -1;
 
-#if ENABLED(EMERGENCY_PARSER)
-  static EmergencyParser::State emergency_state; // = EP_RESET
-#endif
-
 // Public Methods
 void MarlinSerialUSB::begin(const long) {}
 
@@ -73,7 +65,7 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)pending_char));
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)pending_char));
 
   return pending_char;
 }
@@ -95,29 +87,27 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)c));
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)c));
 
   return c;
 }
 
-bool MarlinSerialUSB::available() {
-    /* If Pending chars */
-  return pending_char >= 0 ||
-    /* or USB CDC enumerated and configured on the PC side and some
-       bytes where sent to us */
-      (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
+int MarlinSerialUSB::available() {
+  if (pending_char > 0) return pending_char;
+  return pending_char == 0 ||
+    // or USB CDC enumerated and configured on the PC side and some bytes where sent to us */
+    (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
 }
 
 void MarlinSerialUSB::flush() { }
-void MarlinSerialUSB::flushTX() { }
 
-void MarlinSerialUSB::write(const uint8_t c) {
+size_t MarlinSerialUSB::write(const uint8_t c) {
 
   /* Do not even bother sending anything if USB CDC is not enumerated
      or not configured on the PC side or there is no program on the PC
      listening to our messages */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return;
+    return 0;
 
   /* Wait until the PC has read the pending to be sent data */
   while (usb_task_cdc_isenabled() &&
@@ -129,161 +119,23 @@ void MarlinSerialUSB::write(const uint8_t c) {
      or not configured on the PC side or there is no program on the PC
      listening to our messages at this point */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return;
+    return 0;
 
   // Fifo full
   //  udi_cdc_signal_overrun();
   udi_cdc_putc(c);
-}
-
-/**
- * Imports from print.h
- */
-
-void MarlinSerialUSB::print(char c, int base) {
-  print((long)c, base);
-}
-
-void MarlinSerialUSB::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-void MarlinSerialUSB::print(int n, int base) {
-  print((long)n, base);
-}
-
-void MarlinSerialUSB::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-void MarlinSerialUSB::print(long n, int base) {
-  if (base == 0)
-    write(n);
-  else if (base == 10) {
-    if (n < 0) {
-      print('-');
-      n = -n;
-    }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-void MarlinSerialUSB::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-void MarlinSerialUSB::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-void MarlinSerialUSB::println() {
-  print('\r');
-  print('\n');
-}
-
-void MarlinSerialUSB::println(const String& s) {
-  print(s);
-  println();
-}
-
-void MarlinSerialUSB::println(const char c[]) {
-  print(c);
-  println();
-}
-
-void MarlinSerialUSB::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-void MarlinSerialUSB::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-
-void MarlinSerialUSB::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits)
-    rounding *= 0.1;
-
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
+  return 1;
 }
 
 // Preinstantiate
 #if SERIAL_PORT == -1
-  MarlinSerialUSB customizedSerial1;
+  MSerialT1 customizedSerial1(TERN0(EMERGENCY_PARSER, true));
 #endif
 #if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
+  MSerialT2 customizedSerial2(TERN0(EMERGENCY_PARSER, true));
+#endif
+#if SERIAL_PORT_3 == -1
+  MSerialT3 customizedSerial3(TERN0(EMERGENCY_PARSER, true));
 #endif
 
 #endif // HAS_USB_SERIAL

Marlin/src/HAL/DUE/MarlinSerialUSB.h

@@ -27,73 +27,39 @@
  */
 
 #include "../../inc/MarlinConfig.h"
-
-#if HAS_USB_SERIAL
+#include "../../core/serial_hook.h"
 
 #include <WString.h>
 
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
-
-class MarlinSerialUSB {
-
-public:
-  MarlinSerialUSB() {};
-  static void begin(const long);
-  static void end();
-  static int peek();
-  static int read();
-  static void flush();
-  static void flushTX();
-  static bool available();
-  static void write(const uint8_t c);
+struct MarlinSerialUSB {
+  void begin(const long);
+  void end();
+  int peek();
+  int read();
+  void flush();
+  int available();
+  size_t write(const uint8_t c);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
-    FORCE_INLINE static uint32_t dropped() { return 0; }
+    FORCE_INLINE uint32_t dropped() { return 0; }
   #endif
 
   #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-    FORCE_INLINE static int rxMaxEnqueued() { return 0; }
+    FORCE_INLINE int rxMaxEnqueued() { return 0; }
   #endif
-
-  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-  FORCE_INLINE static void print(const char* str) { write(str); }
-
-  static void print(char, int = 0);
-  static void print(unsigned char, int = 0);
-  static void print(int, int = DEC);
-  static void print(unsigned int, int = DEC);
-  static void print(long, int = DEC);
-  static void print(unsigned long, int = DEC);
-  static void print(double, int = 2);
-
-  static void println(const String& s);
-  static void println(const char[]);
-  static void println(char, int = 0);
-  static void println(unsigned char, int = 0);
-  static void println(int, int = DEC);
-  static void println(unsigned int, int = DEC);
-  static void println(long, int = DEC);
-  static void println(unsigned long, int = DEC);
-  static void println(double, int = 2);
-  static void println();
-  operator bool() { return true; }
-
-private:
-  static void printNumber(unsigned long, const uint8_t);
-  static void printFloat(double, uint8_t);
 };
 
 #if SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial1;
+  typedef Serial1Class<MarlinSerialUSB> MSerialT1;
+  extern MSerialT1 customizedSerial1;
 #endif
 
 #if SERIAL_PORT_2 == -1
-  extern MarlinSerialUSB customizedSerial2;
+  typedef Serial1Class<MarlinSerialUSB> MSerialT2;
+  extern MSerialT2 customizedSerial2;
 #endif
 
-#endif // HAS_USB_SERIAL
+#if SERIAL_PORT_3 == -1
+  typedef Serial1Class<MarlinSerialUSB> MSerialT3;
+  extern MSerialT3 customizedSerial3;
+#endif

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -52,25 +52,23 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include <U8glib.h>
 
 #include "../../../MarlinCore.h"
 
-void spiBegin();
-void spiInit(uint8_t spiRate);
-void spiSend(uint8_t b);
-void spiSend(const uint8_t* buf, size_t n);
+#ifndef LCD_SPI_SPEED
+  #define LCD_SPI_SPEED SPI_QUARTER_SPEED
+#endif
 
-#include "../../shared/Marduino.h"
+#include "../../shared/HAL_SPI.h"
 #include "../fastio.h"
 
 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
@@ -101,11 +99,7 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 
       spiBegin();
 
-      #ifndef SPI_SPEED
-        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
-      #endif
-      spiInit(2);
-
+      spiInit(LCD_SPI_SPEED);
       break;
 
     case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -145,6 +139,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
-#endif //__SAM3X8E__
+#endif // __SAM3X8E__

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -59,6 +59,7 @@
 
 #if ENABLED(U8GLIB_ST7920)
 
+#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
 #include <U8glib.h>
@@ -145,7 +146,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -57,10 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
-
-#undef SPI_SPEED
-#define SPI_SPEED 2  // About 2 MHz
+#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -144,5 +141,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
+#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -57,8 +57,9 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
+#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
 #include <U8glib.h>
@@ -108,5 +109,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -53,7 +53,6 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
- *
  */
 
 //#define EE_EMU_DEBUG
@@ -61,7 +60,7 @@
 #define EEPROMSize     4096
 #define PagesPerGroup   128
 #define GroupCount        2
-#define PageSize        256u
+#define PageSize        256U
 
  /* Flash storage */
 typedef struct FLASH_SECTOR {
@@ -136,11 +135,11 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
 #define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
 #include "../../core/debug_out.h"
 
-static void ee_Dump(const int page, const void* data) {
+static void ee_Dump(const int page, const void *data) {
 
   #ifdef EE_EMU_DEBUG
 
-    const uint8_t* c = (const uint8_t*) data;
+    const uint8_t *c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
@@ -182,7 +181,7 @@ static void ee_Dump(const int page, const void* data) {
  * @param data    (pointer to the data buffer)
  */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page, const void* data) {
+static bool ee_PageWrite(uint16_t page, const void *data) {
 
   uint16_t i;
   uint32_t addrflash = uint32_t(getFlashStorage(page));
@@ -294,8 +293,8 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
       ee_Dump(-page, data);
 
       // Calculate count of changed bits
-      uint32_t* p1 = (uint32_t*)addrflash;
-      uint32_t* p2 = (uint32_t*)data;
+      uint32_t *p1 = (uint32_t*)addrflash;
+      uint32_t *p2 = (uint32_t*)data;
       int count = 0;
       for (i =0; i<PageSize >> 2; i++) {
         if (p1[i] != p2[i]) {
@@ -471,7 +470,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -551,7 +550,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -590,7 +589,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
 }
 
 static bool ee_IsPageClean(int page) {
-  uint32_t* pflash = (uint32_t*) getFlashStorage(page);
+  uint32_t *pflash = (uint32_t*) getFlashStorage(page);
   for (uint16_t i = 0; i < (PageSize >> 2); ++i)
     if (*pflash++ != 0xFFFFFFFF) return false;
   return true;
@@ -600,7 +599,7 @@ static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
-  uint32_t* p = (uint32_t*) &buffer[0];
+  uint32_t *p = (uint32_t*) &buffer[0];
   for (uint16_t j = 0; j < (PageSize >> 2); j++) {
     if (*p++ != 0xFFFFFFFF) {
       isEmpty = false;
@@ -977,14 +976,13 @@ bool PersistentStore::access_start()  { ee_Init();  return true; }
 bool PersistentStore::access_finish() { ee_Flush(); return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != ee_Read(uint32_t(p))) {
+    if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       ee_Write(uint32_t(p), v);
-      delay(2);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
       if (ee_Read(uint32_t(p)) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -997,7 +995,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = ee_Read(uint32_t(pos));
     if (writing) *value = c;

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -42,14 +42,13 @@ bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
-      delay(2);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
       if (eeprom_read_byte(p) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -62,7 +61,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -64,4 +64,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/DUE/fastio.h

@@ -33,7 +33,7 @@
  * For ARDUINO_ARCH_SAM
  * Note the code here was specifically crafted by disassembling what GCC produces
  * out of it, so GCC is able to optimize it out as much as possible to the least
- * amount of instructions. Be very carefull if you modify them, as "clean code"
+ * amount of instructions. Be very careful if you modify them, as "clean code"
  * leads to less efficient compiled code!!
  */
 
@@ -50,7 +50,7 @@
 #define PWM_PIN(P)              WITHIN(P, 2, 13)
 
 #ifndef MASK
-  #define MASK(PIN) (1 << PIN)
+  #define MASK(PIN) _BV(PIN)
 #endif
 
 /**
@@ -163,6 +163,9 @@
 #define SET_INPUT(IO)        _SET_INPUT(IO)
 // Set pin as input with pullup (wrapper)
 #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
+// Set pin as input with pulldown (substitution)
+#define SET_INPUT_PULLDOWN   SET_INPUT
+
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
@@ -477,7 +480,7 @@
 #define DIO91_PIN 15
 #define DIO91_WPORT PIOB
 
-#if ARDUINO_SAM_ARCHIM
+#ifdef ARDUINO_SAM_ARCHIM
 
   #define DIO92_PIN 11
   #define DIO92_WPORT PIOC

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -154,7 +154,7 @@ void Stepper::digipot_init() {
   NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
 }
 
-void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
 
   if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
 

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -40,7 +40,7 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
+#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
 
 #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
@@ -57,5 +57,5 @@
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+  #error "TMC220x Software Serial is not supported on the DUE platform."
 #endif

Marlin/src/HAL/DUE/pinsDebug.h

@@ -179,5 +179,4 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
- *
  */

Marlin/src/HAL/DUE/spi_pins.h

@@ -43,22 +43,22 @@
     #define SPI_PIN         87
     #define SPI_CHAN         1
   #endif
-  #define SCK_PIN           76
-  #define MISO_PIN          74
-  #define MOSI_PIN          75
+  #define SD_SCK_PIN        76
+  #define SD_MISO_PIN       74
+  #define SD_MOSI_PIN       75
 #else
   // defaults
   #define DUE_SOFTWARE_SPI
-  #ifndef SCK_PIN
-    #define SCK_PIN           52
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN      52
   #endif
-  #ifndef MISO_PIN
-    #define MISO_PIN          50
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN     50
   #endif
-  #ifndef MOSI_PIN
-    #define MOSI_PIN          51
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN     51
   #endif
 #endif
 
 /* A.28, A.29, B.21, C.26, C.29 */
-#define SS_PIN            SDSS
+#define SD_SS_PIN         SDSS

Marlin/src/HAL/DUE/timers.cpp

@@ -21,9 +21,7 @@
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL Timers for Arduino Due and compatible (SAM3X8E)
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -123,7 +121,7 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
 
 // missing from CMSIS: Check if interrupt is enabled or not
 static bool NVIC_GetEnabledIRQ(IRQn_Type IRQn) {
-  return (NVIC->ISER[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F))) != 0;
+  return TEST(NVIC->ISER[uint32_t(IRQn) >> 5], uint32_t(IRQn) & 0x1F);
 }
 
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {

Marlin/src/HAL/DUE/timers.h

@@ -21,9 +21,7 @@
 #pragma once
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL Timers for Arduino Due and compatible (SAM3X8E)
  */
 
 #include <stdint.h>

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -14,5 +14,5 @@ if current_OS == 'Windows':
 
 	# Use bossac.exe on Windows
 	env.Replace(
-	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot"
+	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
 	)

Marlin/src/HAL/DUE/usb/arduino_due_x.h

@@ -93,5 +93,5 @@
 #define USB_VBOF_GPIO               (PIO_PB10_IDX)
 #define USB_VBOF_FLAGS              (PIO_PERIPH_A | PIO_DEFAULT)
 /*! Active level of the USB_VBOF output pin. */
-#define USB_VBOF_ACTIVE_LEVEL       LOW
+#define USB_VBOF_ACTIVE_STATE       LOW
 /* ------------------------------------------------------------------------ */

Marlin/src/HAL/DUE/usb/compiler.h

@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-#	undef __always_inline
+# undef __always_inline
 #endif
-#	define __always_inline   inline __attribute__((__always_inline__))
+# define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-#	define __always_inline   _Pragma("inline=forced")
+# define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-#   define __no_inline   __attribute__((noinline))
+# define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-#	define __no_inline   __attribute__((__noinline__))
+# define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-#	define __no_inline   _Pragma("inline=never")
+# define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-	{\
-		if (!(expr)) while (true);\
-	}
+  {\
+    if (!(expr)) while (true);\
+  }
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1ul << 31)) ?  0 : \
-                                ((u) & (1ul << 30)) ?  1 : \
-                                ((u) & (1ul << 29)) ?  2 : \
-                                ((u) & (1ul << 28)) ?  3 : \
-                                ((u) & (1ul << 27)) ?  4 : \
-                                ((u) & (1ul << 26)) ?  5 : \
-                                ((u) & (1ul << 25)) ?  6 : \
-                                ((u) & (1ul << 24)) ?  7 : \
-                                ((u) & (1ul << 23)) ?  8 : \
-                                ((u) & (1ul << 22)) ?  9 : \
-                                ((u) & (1ul << 21)) ? 10 : \
-                                ((u) & (1ul << 20)) ? 11 : \
-                                ((u) & (1ul << 19)) ? 12 : \
-                                ((u) & (1ul << 18)) ? 13 : \
-                                ((u) & (1ul << 17)) ? 14 : \
-                                ((u) & (1ul << 16)) ? 15 : \
-                                ((u) & (1ul << 15)) ? 16 : \
-                                ((u) & (1ul << 14)) ? 17 : \
-                                ((u) & (1ul << 13)) ? 18 : \
-                                ((u) & (1ul << 12)) ? 19 : \
-                                ((u) & (1ul << 11)) ? 20 : \
-                                ((u) & (1ul << 10)) ? 21 : \
-                                ((u) & (1ul <<  9)) ? 22 : \
-                                ((u) & (1ul <<  8)) ? 23 : \
-                                ((u) & (1ul <<  7)) ? 24 : \
-                                ((u) & (1ul <<  6)) ? 25 : \
-                                ((u) & (1ul <<  5)) ? 26 : \
-                                ((u) & (1ul <<  4)) ? 27 : \
-                                ((u) & (1ul <<  3)) ? 28 : \
-                                ((u) & (1ul <<  2)) ? 29 : \
-                                ((u) & (1ul <<  1)) ? 30 : \
+                                ((u) & (1UL << 31)) ?  0 : \
+                                ((u) & (1UL << 30)) ?  1 : \
+                                ((u) & (1UL << 29)) ?  2 : \
+                                ((u) & (1UL << 28)) ?  3 : \
+                                ((u) & (1UL << 27)) ?  4 : \
+                                ((u) & (1UL << 26)) ?  5 : \
+                                ((u) & (1UL << 25)) ?  6 : \
+                                ((u) & (1UL << 24)) ?  7 : \
+                                ((u) & (1UL << 23)) ?  8 : \
+                                ((u) & (1UL << 22)) ?  9 : \
+                                ((u) & (1UL << 21)) ? 10 : \
+                                ((u) & (1UL << 20)) ? 11 : \
+                                ((u) & (1UL << 19)) ? 12 : \
+                                ((u) & (1UL << 18)) ? 13 : \
+                                ((u) & (1UL << 17)) ? 14 : \
+                                ((u) & (1UL << 16)) ? 15 : \
+                                ((u) & (1UL << 15)) ? 16 : \
+                                ((u) & (1UL << 14)) ? 17 : \
+                                ((u) & (1UL << 13)) ? 18 : \
+                                ((u) & (1UL << 12)) ? 19 : \
+                                ((u) & (1UL << 11)) ? 20 : \
+                                ((u) & (1UL << 10)) ? 21 : \
+                                ((u) & (1UL <<  9)) ? 22 : \
+                                ((u) & (1UL <<  8)) ? 23 : \
+                                ((u) & (1UL <<  7)) ? 24 : \
+                                ((u) & (1UL <<  6)) ? 25 : \
+                                ((u) & (1UL <<  5)) ? 26 : \
+                                ((u) & (1UL <<  4)) ? 27 : \
+                                ((u) & (1UL <<  3)) ? 28 : \
+                                ((u) & (1UL <<  2)) ? 29 : \
+                                ((u) & (1UL <<  1)) ? 30 : \
                                 31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
-                                (u) & (1ul <<  1) ?  1 : \
-                                (u) & (1ul <<  2) ?  2 : \
-                                (u) & (1ul <<  3) ?  3 : \
-                                (u) & (1ul <<  4) ?  4 : \
-                                (u) & (1ul <<  5) ?  5 : \
-                                (u) & (1ul <<  6) ?  6 : \
-                                (u) & (1ul <<  7) ?  7 : \
-                                (u) & (1ul <<  8) ?  8 : \
-                                (u) & (1ul <<  9) ?  9 : \
-                                (u) & (1ul << 10) ? 10 : \
-                                (u) & (1ul << 11) ? 11 : \
-                                (u) & (1ul << 12) ? 12 : \
-                                (u) & (1ul << 13) ? 13 : \
-                                (u) & (1ul << 14) ? 14 : \
-                                (u) & (1ul << 15) ? 15 : \
-                                (u) & (1ul << 16) ? 16 : \
-                                (u) & (1ul << 17) ? 17 : \
-                                (u) & (1ul << 18) ? 18 : \
-                                (u) & (1ul << 19) ? 19 : \
-                                (u) & (1ul << 20) ? 20 : \
-                                (u) & (1ul << 21) ? 21 : \
-                                (u) & (1ul << 22) ? 22 : \
-                                (u) & (1ul << 23) ? 23 : \
-                                (u) & (1ul << 24) ? 24 : \
-                                (u) & (1ul << 25) ? 25 : \
-                                (u) & (1ul << 26) ? 26 : \
-                                (u) & (1ul << 27) ? 27 : \
-                                (u) & (1ul << 28) ? 28 : \
-                                (u) & (1ul << 29) ? 29 : \
-                                (u) & (1ul << 30) ? 30 : \
-                                (u) & (1ul << 31) ? 31 : \
+#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
+                                (u) & (1UL <<  1) ?  1 : \
+                                (u) & (1UL <<  2) ?  2 : \
+                                (u) & (1UL <<  3) ?  3 : \
+                                (u) & (1UL <<  4) ?  4 : \
+                                (u) & (1UL <<  5) ?  5 : \
+                                (u) & (1UL <<  6) ?  6 : \
+                                (u) & (1UL <<  7) ?  7 : \
+                                (u) & (1UL <<  8) ?  8 : \
+                                (u) & (1UL <<  9) ?  9 : \
+                                (u) & (1UL << 10) ? 10 : \
+                                (u) & (1UL << 11) ? 11 : \
+                                (u) & (1UL << 12) ? 12 : \
+                                (u) & (1UL << 13) ? 13 : \
+                                (u) & (1UL << 14) ? 14 : \
+                                (u) & (1UL << 15) ? 15 : \
+                                (u) & (1UL << 16) ? 16 : \
+                                (u) & (1UL << 17) ? 17 : \
+                                (u) & (1UL << 18) ? 18 : \
+                                (u) & (1UL << 19) ? 19 : \
+                                (u) & (1UL << 20) ? 20 : \
+                                (u) & (1UL << 21) ? 21 : \
+                                (u) & (1UL << 22) ? 22 : \
+                                (u) & (1UL << 23) ? 23 : \
+                                (u) & (1UL << 24) ? 24 : \
+                                (u) & (1UL << 25) ? 25 : \
+                                (u) & (1UL << 26) ? 26 : \
+                                (u) & (1UL << 27) ? 27 : \
+                                (u) & (1UL << 28) ? 28 : \
+                                (u) & (1UL << 29) ? 29 : \
+                                (u) & (1UL << 30) ? 30 : \
+                                (u) & (1UL << 31) ? 31 : \
                                 32)
 #endif
 #endif
@@ -1106,17 +1106,16 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-	union
-	{
-		uint32_t u32;
-		uint8_t u8[8];
-	}long_addr;
-	uint8_t index;
-	for (index = 0; index < 4; index++)
-	{
-		long_addr.u8[index] = *data++;
-	}
-	return long_addr.u32;
+  union
+  {
+    uint32_t u32;
+    uint8_t u8[8];
+  }long_addr;
+  uint8_t index;
+  for (index = 0; index < 4; index++) {
+    long_addr.u8[index] = *data++;
+  }
+  return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp

@@ -32,7 +32,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
   if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
     return CTRL_NO_PRESENT;
-  *nb_sector = card.getSd2Card().cardSize() - 1;
+  *nb_sector = card.diskIODriver()->cardSize() - 1;
   return CTRL_GOOD;
 }
 
@@ -68,30 +68,30 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
   {
     char buffer[80];
     sprintf_P(buffer, PSTR("SDRD: %d @ 0x%08x\n"), nb_sector, addr);
-    PORT_REDIRECT(0);
+    PORT_REDIRECT(SERIAL_PORTMASK(0));
     SERIAL_ECHO(buffer);
   }
   #endif
 
   // Start reading
-  if (!card.getSd2Card().readStart(addr))
+  if (!card.diskIODriver()->readStart(addr))
     return CTRL_FAIL;
 
   // For each specified sector
   while (nb_sector--) {
 
     // Read a sector
-    card.getSd2Card().readData(sector_buf);
+    card.diskIODriver()->readData(sector_buf);
 
     // RAM -> USB
-    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
-      card.getSd2Card().readStop();
+    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
+      card.diskIODriver()->readStop();
       return CTRL_FAIL;
     }
   }
 
   // Stop reading
-  card.getSd2Card().readStop();
+  card.diskIODriver()->readStop();
 
   // Done
   return CTRL_GOOD;
@@ -108,29 +108,29 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
   {
     char buffer[80];
     sprintf_P(buffer, PSTR("SDWR: %d @ 0x%08x\n"), nb_sector, addr);
-    PORT_REDIRECT(0);
+    PORT_REDIRECT(SERIAL_PORTMASK(0));
     SERIAL_ECHO(buffer);
   }
   #endif
 
-  if (!card.getSd2Card().writeStart(addr, nb_sector))
+  if (!card.diskIODriver()->writeStart(addr, nb_sector))
     return CTRL_FAIL;
 
   // For each specified sector
   while (nb_sector--) {
 
     // USB -> RAM
-    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
-      card.getSd2Card().writeStop();
+    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
+      card.diskIODriver()->writeStop();
       return CTRL_FAIL;
     }
 
     // Write a sector
-    card.getSd2Card().writeData(sector_buf);
+    card.diskIODriver()->writeData(sector_buf);
   }
 
   // Stop writing
-  card.getSd2Card().writeStop();
+  card.diskIODriver()->writeStop();
 
   // Done
   return CTRL_GOOD;

Marlin/src/HAL/DUE/usb/udi_cdc.h

@@ -675,11 +675,11 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
  *   - \code // Waits and gets a value on CDC line
 	int udi_cdc_getc(void);
 	// Reads a RAM buffer on CDC line
-	iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
+	iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
 	// Puts a byte on CDC line
 	int udi_cdc_putc(int value);
 	// Writes a RAM buffer on CDC line
-	iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
+	iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
  *
  * \section udi_cdc_use_cases Advanced use cases
  * For more advanced use of the UDI CDC module, see the following use cases:

Marlin/src/HAL/DUE/usb/usb_task.c

@@ -264,7 +264,7 @@ bool usb_task_extra_string(void) {
 ** Handle device requests that the ASF stack doesn't
 */
 bool usb_task_other_requests(void) {
-  uint8_t* ptr = 0;
+  uint8_t *ptr = 0;
   uint16_t size = 0;
 
   if (Udd_setup_type() == USB_REQ_TYPE_VENDOR) {
@@ -322,7 +322,7 @@ void usb_task_init(void) {
       char *sptr;
 
       // Patch in the filament diameter
-      sprintf_P(diam, PSTR("%d"), (int)((DEFAULT_NOMINAL_FILAMENT_DIA) * 1000.0));
+      itoa((int)((DEFAULT_NOMINAL_FILAMENT_DIA) * 1000), diam, 10);
 
       // And copy it to the proper place, expanding it to unicode
       sptr = &diam[0];

Marlin/src/HAL/DUE/watchdog.cpp

@@ -36,7 +36,7 @@ void watchdogSetup() {
   #if ENABLED(USE_WATCHDOG)
 
     // 4 seconds timeout
-    uint32_t timeout = 4000;
+    uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
 
     // Calculate timeout value in WDT counter ticks: This assumes
     // the slow clock is running at 32.768 kHz watchdog

Marlin/src/HAL/ESP32/FlushableHardwareSerial.cpp

@@ -20,14 +20,10 @@
  *
  */
 
-#include "FlushableHardwareSerial.h"
-
 #ifdef ARDUINO_ARCH_ESP32
 
-FlushableHardwareSerial::FlushableHardwareSerial(int uart_nr)
-    : HardwareSerial(uart_nr)
-{}
+#include "FlushableHardwareSerial.h"
 
-FlushableHardwareSerial flushableSerial(0);
+Serial1Class<FlushableHardwareSerial> flushableSerial(false, 0);
 
-#endif // ARDUINO_ARCH_ESP32
+#endif

Marlin/src/HAL/ESP32/FlushableHardwareSerial.h

@@ -21,17 +21,14 @@
  */
 #pragma once
 
-#ifdef ARDUINO_ARCH_ESP32
-
 #include <HardwareSerial.h>
 
+#include "../shared/Marduino.h"
+#include "../../core/serial_hook.h"
+
 class FlushableHardwareSerial : public HardwareSerial {
 public:
-  FlushableHardwareSerial(int uart_nr);
-
-  inline void flushTX() { /* No need to flush the hardware serial, but defined here for compatibility. */ }
+  FlushableHardwareSerial(int uart_nr) : HardwareSerial(uart_nr) {}
 };
 
-extern FlushableHardwareSerial flushableSerial;
-
-#endif // ARDUINO_ARCH_ESP32
+extern Serial1Class<FlushableHardwareSerial> flushableSerial;

Marlin/src/HAL/ESP32/HAL.cpp

@@ -40,6 +40,10 @@
   #endif
 #endif
 
+#if ENABLED(ESP3D_WIFISUPPORT)
+  DefaultSerial1 MSerial0(false, Serial2Socket);
+#endif
+
 // ------------------------
 // Externs
 // ------------------------
@@ -86,8 +90,6 @@ volatile int numPWMUsed = 0,
 
 #endif
 
-void HAL_init() { i2s_init(); }
-
 void HAL_init_board() {
 
   #if ENABLED(ESP3D_WIFISUPPORT)
@@ -122,6 +124,10 @@ void HAL_init_board() {
     #endif
   #endif
 
+  // Initialize the i2s peripheral only if the I2S stepper stream is enabled.
+  // The following initialization is performed after Serial1 and Serial2 are defined as
+  // their native pins might conflict with the i2s stream even when they are remapped.
+  TERN_(I2S_STEPPER_STREAM, i2s_init());
 }
 
 void HAL_idletask() {
@@ -135,6 +141,8 @@ void HAL_clear_reset_source() { }
 
 uint8_t HAL_get_reset_source() { return rtc_get_reset_reason(1); }
 
+void HAL_reboot() { ESP.restart(); }
+
 void _delay_ms(int delay_ms) { delay(delay_ms); }
 
 // return free memory between end of heap (or end bss) and whatever is current
@@ -179,6 +187,7 @@ void HAL_adc_init() {
   TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
   TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
   TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
+  TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db));
   TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
 
   // Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.

Marlin/src/HAL/ESP32/HAL.h

@@ -15,11 +15,12 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 
 /**
- * Description: HAL for Espressif ESP32 WiFi
+ * HAL for Espressif ESP32 WiFi
  */
 
 #define CPU_32_BIT
@@ -50,17 +51,16 @@
 
 extern portMUX_TYPE spinlock;
 
-#define MYSERIAL0 flushableSerial
+#define MYSERIAL1 flushableSerial
 
 #if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
   #if ENABLED(ESP3D_WIFISUPPORT)
-    #define MYSERIAL1 Serial2Socket
+    typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
+    extern DefaultSerial1 MSerial0;
+    #define MYSERIAL2 MSerial0
   #else
-    #define MYSERIAL1 webSocketSerial
+    #define MYSERIAL2 webSocketSerial
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
 #define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
@@ -69,10 +69,6 @@ extern portMUX_TYPE spinlock;
 #define ENABLE_ISRS()  if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
 #define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
 
-// Fix bug in pgm_read_ptr
-#undef pgm_read_ptr
-#define pgm_read_ptr(addr) (*(addr))
-
 // ------------------------
 // Types
 // ------------------------
@@ -92,18 +88,33 @@ extern uint16_t HAL_adc_result;
 // Public functions
 // ------------------------
 
+//
+// Tone
+//
+void toneInit();
+void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
+void noTone(const pin_t _pin);
+
 // clear reset reason
 void HAL_clear_reset_source();
 
 // reset reason
 uint8_t HAL_get_reset_source();
 
+void HAL_reboot();
+
 void _delay_ms(int delay);
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 void analogWrite(pin_t pin, int value);
 
@@ -128,7 +139,7 @@ void HAL_adc_start_conversion(const uint8_t adc_pin);
 #define HAL_IDLETASK 1
 #define BOARD_INIT() HAL_init_board();
 void HAL_idletask();
-void HAL_init();
+inline void HAL_init() {}
 void HAL_init_board();
 
 //
@@ -157,14 +168,14 @@ FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
 
   if (stop >= start) {
     // no overflow, so only loop while in between start and stop:
-    // 0x00000000 -----------------start****stop-- 0xffffffff
+    // 0x00000000 -----------------start****stop-- 0xFFFFFFFF
     while (ccount >= start && ccount < stop) {
       __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
     }
   }
   else {
     // stop did overflow, so only loop while outside of stop and start:
-    // 0x00000000 **stop-------------------start** 0xffffffff
+    // 0x00000000 **stop-------------------start** 0xFFFFFFFF
     while (ccount >= start || ccount < stop) {
       __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
     }

Marlin/src/HAL/ESP32/HAL_SPI.cpp

@@ -53,11 +53,11 @@ static SPISettings spiConfig;
 // ------------------------
 
 void spiBegin() {
-  #if !PIN_EXISTS(SS)
-    #error "SS_PIN not defined!"
+  #if !PIN_EXISTS(SD_SS)
+    #error "SD_SS_PIN not defined!"
   #endif
 
-  OUT_WRITE(SS_PIN, HIGH);
+  OUT_WRITE(SD_SS_PIN, HIGH);
 }
 
 void spiInit(uint8_t spiRate) {
@@ -85,7 +85,7 @@ uint8_t spiRec() {
   return returnByte;
 }
 
-void spiRead(uint8_t* buf, uint16_t nbyte) {
+void spiRead(uint8_t *buf, uint16_t nbyte) {
   SPI.beginTransaction(spiConfig);
   SPI.transferBytes(0, buf, nbyte);
   SPI.endTransaction();
@@ -97,7 +97,7 @@ void spiSend(uint8_t b) {
   SPI.endTransaction();
 }
 
-void spiSendBlock(uint8_t token, const uint8_t* buf) {
+void spiSendBlock(uint8_t token, const uint8_t *buf) {
   SPI.beginTransaction(spiConfig);
   SPI.transfer(token);
   SPI.writeBytes(const_cast<uint8_t*>(buf), 512);

Marlin/src/HAL/ESP32/Servo.h

@@ -30,7 +30,7 @@ class Servo {
                    MAX_PULSE_WIDTH = 2400,  // Longest pulse sent to a servo
                    TAU_MSEC = 20,
                    TAU_USEC = (TAU_MSEC * 1000),
-                   MAX_COMPARE = ((1 << 16) - 1), // 65535
+                   MAX_COMPARE = _BV(16) - 1, // 65535
                    CHANNEL_MAX_NUM = 16;
 
 public:

Marlin/src/HAL/ESP32/Tone.cpp

@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * Copypaste of SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Description: Tone function for ESP32
+ * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ */
+
+#ifdef ARDUINO_ARCH_ESP32
+
+#include "../../inc/MarlinConfig.h"
+#include "HAL.h"
+
+static pin_t tone_pin;
+volatile static int32_t toggles;
+
+void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
+  tone_pin = _pin;
+  toggles = 2 * frequency * duration / 1000;
+  HAL_timer_start(TONE_TIMER_NUM, 2 * frequency);
+}
+
+void noTone(const pin_t _pin) {
+  HAL_timer_disable_interrupt(TONE_TIMER_NUM);
+  WRITE(_pin, LOW);
+}
+
+HAL_TONE_TIMER_ISR() {
+  HAL_timer_isr_prologue(TONE_TIMER_NUM);
+
+  if (toggles) {
+    toggles--;
+    TOGGLE(tone_pin);
+  }
+  else noTone(tone_pin);                         // turn off interrupt
+}
+
+#endif // ARDUINO_ARCH_ESP32

Marlin/src/HAL/ESP32/WebSocketSerial.cpp

@@ -29,7 +29,7 @@
 #include "wifi.h"
 #include <ESPAsyncWebServer.h>
 
-WebSocketSerial webSocketSerial;
+MSerialWebSocketT webSocketSerial(false);
 AsyncWebSocket ws("/ws"); // TODO Move inside the class.
 
 // RingBuffer impl
@@ -86,7 +86,7 @@ int RingBuffer::read() {
 ring_buffer_pos_t RingBuffer::read(uint8_t *buffer) {
    ring_buffer_pos_t len = available();
 
-  for(ring_buffer_pos_t i = 0; read_index != write_index; i++) {
+  for (ring_buffer_pos_t i = 0; read_index != write_index; i++) {
     buffer[i] = data[read_index];
     read_index = NEXT_INDEX(read_index, size);
   }
@@ -137,17 +137,12 @@ size_t WebSocketSerial::write(const uint8_t c) {
   return ret;
 }
 
-size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
+size_t WebSocketSerial::write(const uint8_t *buffer, size_t size) {
   size_t written = 0;
-  for(size_t i = 0; i < size; i++) {
+  for (size_t i = 0; i < size; i++)
     written += write(buffer[i]);
-  }
   return written;
 }
 
-void WebSocketSerial::flushTX() {
-  // No need to do anything as there's no benefit to sending partial lines over the websocket connection.
-}
-
 #endif // WIFISUPPORT
 #endif // ARDUINO_ARCH_ESP32

Marlin/src/HAL/ESP32/WebSocketSerial.h

@@ -22,6 +22,7 @@
 #pragma once
 
 #include "../../inc/MarlinConfig.h"
+#include "../../core/serial_hook.h"
 
 #include <Stream.h>
 
@@ -53,7 +54,7 @@ public:
   ring_buffer_pos_t read(uint8_t *buffer);
   void flush();
   ring_buffer_pos_t write(const uint8_t c);
-  ring_buffer_pos_t write(const uint8_t* buffer, ring_buffer_pos_t size);
+  ring_buffer_pos_t write(const uint8_t *buffer, ring_buffer_pos_t size);
 };
 
 class WebSocketSerial: public Stream {
@@ -68,11 +69,8 @@ public:
   int peek();
   int read();
   void flush();
-  void flushTX();
   size_t write(const uint8_t c);
-  size_t write(const uint8_t* buffer, size_t size);
-
-  operator bool() { return true; }
+  size_t write(const uint8_t *buffer, size_t size);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
     FORCE_INLINE uint32_t dropped() { return 0; }
@@ -83,4 +81,5 @@ public:
   #endif
 };
 
-extern WebSocketSerial webSocketSerial;
+typedef Serial1Class<WebSocketSerial> MSerialWebSocketT;
+extern MSerialWebSocketT webSocketSerial;

Marlin/src/HAL/ESP32/eeprom.cpp

@@ -44,7 +44,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   for (size_t i = 0; i < size; i++) {
     uint8_t c = EEPROM.read(pos++);
     if (writing) value[i] = c;

Marlin/src/HAL/ESP32/endstop_interrupts.h

@@ -59,4 +59,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/ESP32/fastio.h

@@ -52,6 +52,9 @@
 // Set pin as input with pullup wrapper
 #define SET_INPUT_PULLUP(IO)    do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
 
+// Set pin as input with pulldown (substitution)
+#define SET_INPUT_PULLDOWN      SET_INPUT
+
 // Set pin as output wrapper
 #define SET_OUTPUT(IO)          do{ _SET_OUTPUT(IO); }while(0)
 

Marlin/src/HAL/ESP32/i2s.cpp

@@ -139,7 +139,7 @@ static void IRAM_ATTR i2s_intr_handler_default(void *arg) {
   I2S0.int_clr.val = I2S0.int_st.val; //clear pending interrupt
 }
 
-void stepperTask(void* parameter) {
+void stepperTask(void *parameter) {
   uint32_t remaining = 0;
 
   while (1) {
@@ -184,7 +184,7 @@ int i2s_init() {
 
   // Allocate the array of pointers to the buffers
   dma.buffers = (uint32_t **)malloc(sizeof(uint32_t*) * DMA_BUF_COUNT);
-  if (dma.buffers == nullptr) return -1;
+  if (!dma.buffers) return -1;
 
   // Allocate each buffer that can be used by the DMA controller
   for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
@@ -194,7 +194,7 @@ int i2s_init() {
 
   // Allocate the array of DMA descriptors
   dma.desc = (lldesc_t**) malloc(sizeof(lldesc_t*) * DMA_BUF_COUNT);
-  if (dma.desc == nullptr) return -1;
+  if (!dma.desc) return -1;
 
   // Allocate each DMA descriptor that will be used by the DMA controller
   for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {

Marlin/src/HAL/ESP32/inc/SanityCheck.h

@@ -30,9 +30,13 @@
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+  #error "TMC220x Software Serial is not supported on ESP32."
 #endif
 
 #if BOTH(WIFISUPPORT, ESP3D_WIFISUPPORT)
   #error "Only enable one WiFi option, either WIFISUPPORT or ESP3D_WIFISUPPORT."
 #endif
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  #error "POSTMORTEM_DEBUGGING is not yet supported on ESP32."
+#endif

Marlin/src/HAL/ESP32/ota.h

@@ -15,6 +15,7 @@
  *
  * You should have received a copy of the GNU General Public License
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 

Marlin/src/HAL/ESP32/spi_pins.h

@@ -18,7 +18,7 @@
  */
 #pragma once
 
-#define SS_PIN   SDSS
-#define SCK_PIN  18
-#define MISO_PIN 19
-#define MOSI_PIN 23
+#define SD_SS_PIN   SDSS
+#define SD_SCK_PIN  18
+#define SD_MISO_PIN 19
+#define SD_MOSI_PIN 23

Marlin/src/HAL/ESP32/timers.cpp

@@ -45,7 +45,7 @@ const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
   { TIMER_GROUP_0, TIMER_0, STEPPER_TIMER_PRESCALE, stepTC_Handler }, // 0 - Stepper
   { TIMER_GROUP_0, TIMER_1,    TEMP_TIMER_PRESCALE, tempTC_Handler }, // 1 - Temperature
   { TIMER_GROUP_1, TIMER_0,     PWM_TIMER_PRESCALE, pwmTC_Handler  }, // 2 - PWM
-  { TIMER_GROUP_1, TIMER_1,                      1, nullptr }, // 3
+  { TIMER_GROUP_1, TIMER_1,    TONE_TIMER_PRESCALE, toneTC_Handler }, // 3 - Tone
 };
 
 // ------------------------

Marlin/src/HAL/ESP32/timers.h

@@ -24,15 +24,9 @@
 #include <stdint.h>
 #include <driver/timer.h>
 
-// Includes needed to get I2S_STEPPER_STREAM. Note that pins.h
-// is included in case this header is being included early.
-#include "../../inc/MarlinConfig.h"
-#include "../../pins/pins.h"
-
 // ------------------------
 // Defines
 // ------------------------
-//
 #define FORCE_INLINE __attribute__((always_inline)) inline
 
 typedef uint64_t hal_timer_t;
@@ -50,6 +44,9 @@ typedef uint64_t hal_timer_t;
 #ifndef PWM_TIMER_NUM
   #define PWM_TIMER_NUM         2  // index of timer to use for PWM outputs
 #endif
+#ifndef TONE_TIMER_NUM
+  #define TONE_TIMER_NUM        3  // index of timer for beeper tones
+#endif
 
 #define HAL_TIMER_RATE APB_CLK_FREQ // frequency of timer peripherals
 
@@ -65,6 +62,8 @@ typedef uint64_t hal_timer_t;
 
 #define STEP_TIMER_MIN_INTERVAL   8 // minimum time in µs between stepper interrupts
 
+#define TONE_TIMER_PRESCALE    1000 // Arbitrary value, no idea what i'm doing here
+
 #define TEMP_TIMER_PRESCALE    1000 // prescaler for setting Temp timer, 72Khz
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
 
@@ -96,10 +95,16 @@ typedef uint64_t hal_timer_t;
 #ifndef HAL_PWM_TIMER_ISR
   #define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler()
 #endif
+#ifndef HAL_TONE_TIMER_ISR
+  #define HAL_TONE_TIMER_ISR() extern "C" void toneTC_Handler()
+#endif
 
-extern "C" void tempTC_Handler();
-extern "C" void stepTC_Handler();
-extern "C" void pwmTC_Handler();
+extern "C" {
+  void tempTC_Handler();
+  void stepTC_Handler();
+  void pwmTC_Handler();
+  void toneTC_Handler();
+}
 
 // ------------------------
 // Types

Marlin/src/HAL/ESP32/watchdog.cpp

@@ -25,6 +25,8 @@
 
 #if ENABLED(USE_WATCHDOG)
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 #include "watchdog.h"
 
 void watchdogSetup() {

Marlin/src/HAL/HAL.h

@@ -23,12 +23,16 @@
 
 #include "platforms.h"
 
+#ifndef GCC_VERSION
+  #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+
 #include HAL_PATH(.,HAL.h)
 
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
 
 #ifndef I2C_ADDRESS
-  #define I2C_ADDRESS(A) (A)
+  #define I2C_ADDRESS(A) uint8_t(A)
 #endif
 
 // Needed for AVR sprintf_P PROGMEM extension
@@ -38,7 +42,7 @@
 
 // String helper
 #ifndef PGMSTR
-  #define PGMSTR(NAM,STR) constexpr char NAM[] = STR
+  #define PGMSTR(NAM,STR) const char NAM[] = STR
 #endif
 
 inline void watchdog_refresh() {

Marlin/src/HAL/LINUX/HAL.cpp

@@ -24,21 +24,16 @@
 #include "../../inc/MarlinConfig.h"
 #include "../shared/Delay.h"
 
-HalSerial usb_serial;
+MSerialT usb_serial(TERN0(EMERGENCY_PARSER, true));
 
 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//
 
 // return free heap space
@@ -78,4 +73,6 @@ void HAL_pwm_init() {
 
 }
 
+void HAL_reboot() { /* Reset the application state and GPIO */ }
+
 #endif // __PLAT_LINUX__

Marlin/src/HAL/LINUX/HAL.h

@@ -23,7 +23,7 @@
 
 #define CPU_32_BIT
 
-#define F_CPU 100000000
+#define F_CPU 100000000UL
 #define SystemCoreClock F_CPU
 #include <iostream>
 #include <stdint.h>
@@ -60,9 +60,8 @@ uint8_t _getc();
 
 #define SHARED_SERVOS HAS_SERVOS
 
-extern HalSerial usb_serial;
-#define MYSERIAL0 usb_serial
-#define NUM_SERIAL 1
+extern MSerialT usb_serial;
+#define MYSERIAL1 usb_serial
 
 #define ST7920_DELAY_1 DELAY_NS(600)
 #define ST7920_DELAY_2 DELAY_NS(750)
@@ -80,10 +79,16 @@ extern HalSerial usb_serial;
 inline void HAL_init() {}
 
 // Utility functions
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
 #define HAL_ADC_VREF           5.0
@@ -102,12 +107,9 @@ uint16_t HAL_adc_get_result();
 inline void HAL_clear_reset_source(void) {}
 inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }
 
+void HAL_reboot(); // Reset the application state and GPIO
+
 /* ---------------- Delay in cycles */
 FORCE_INLINE static void DELAY_CYCLES(uint64_t x) {
   Clock::delayCycles(x);
 }
-
-// Add strcmp_P if missing
-#ifndef strcmp_P
-  #define strcmp_P(a, b) strcmp((a), (b))
-#endif

Marlin/src/HAL/LINUX/eeprom.cpp

@@ -40,7 +40,7 @@ size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
 bool PersistentStore::access_start() {
   const char eeprom_erase_value = 0xFF;
   FILE * eeprom_file = fopen(filename, "rb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;
 
   fseek(eeprom_file, 0L, SEEK_END);
   std::size_t file_size = ftell(eeprom_file);
@@ -59,7 +59,7 @@ bool PersistentStore::access_start() {
 
 bool PersistentStore::access_finish() {
   FILE * eeprom_file = fopen(filename, "wb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;
   fwrite(buffer, sizeof(uint8_t), sizeof(buffer), eeprom_file);
   fclose(eeprom_file);
   return true;
@@ -78,7 +78,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return (bytes_written != size);  // return true for any error
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
   std::size_t bytes_read = 0;
   if (writing) {
     for (std::size_t i = 0; i < size; i++) {

Marlin/src/HAL/LINUX/hardware/Gpio.h

@@ -86,10 +86,10 @@ public:
     GpioEvent::Type evt_type = value > 1 ? GpioEvent::SET_VALUE : value > pin_map[pin].value ? GpioEvent::RISE : value < pin_map[pin].value ? GpioEvent::FALL : GpioEvent::NOP;
     pin_map[pin].value = value;
     GpioEvent evt(Clock::nanos(), pin, evt_type);
-    if (pin_map[pin].cb != nullptr) {
+    if (pin_map[pin].cb) {
       pin_map[pin].cb->interrupt(evt);
     }
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint16_t get(pin_type pin) {
@@ -105,8 +105,8 @@ public:
     if (!valid_pin(pin)) return;
     pin_map[pin].mode = value;
     GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETM);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint8_t getMode(pin_type pin) {
@@ -118,8 +118,8 @@ public:
     if (!valid_pin(pin)) return;
     pin_map[pin].dir = value;
     GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETD);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
   }
 
   static uint8_t getDir(pin_type pin) {

Marlin/src/HAL/LINUX/inc/SanityCheck.h

@@ -35,5 +35,9 @@
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+  #error "TMC220x Software Serial is not supported on LINUX."
+#endif
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  #error "POSTMORTEM_DEBUGGING is not yet supported on LINUX."
 #endif

Marlin/src/HAL/LINUX/include/Arduino.h

@@ -67,34 +67,14 @@ void cli(); // Disable
 void sei(); // Enable
 void attachInterrupt(uint32_t pin, void (*callback)(), uint32_t mode);
 void detachInterrupt(uint32_t pin);
-extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
-extern "C" void GpioDisableInt(uint32_t port, uint32_t pin);
 
-// Program Memory
-#define pgm_read_ptr(addr)        (*((void**)(addr)))
-#define pgm_read_byte_near(addr)  (*((uint8_t*)(addr)))
-#define pgm_read_float_near(addr) (*((float*)(addr)))
-#define pgm_read_word_near(addr)  (*((uint16_t*)(addr)))
-#define pgm_read_dword_near(addr) (*((uint32_t*)(addr)))
-#define pgm_read_byte(addr)       pgm_read_byte_near(addr)
-#define pgm_read_float(addr)      pgm_read_float_near(addr)
-#define pgm_read_word(addr)       pgm_read_word_near(addr)
-#define pgm_read_dword(addr)      pgm_read_dword_near(addr)
-
-using std::memcpy;
-#define memcpy_P memcpy
-#define sprintf_P sprintf
-#define strstr_P strstr
-#define strncpy_P strncpy
-#define vsnprintf_P vsnprintf
-#define strcpy_P strcpy
-#define snprintf_P snprintf
-#define strlen_P strlen
+extern "C" {
+  void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
+  void GpioDisableInt(uint32_t port, uint32_t pin);
+}
 
 // Time functions
-extern "C" {
-  void delay(const int milis);
-}
+extern "C" void delay(const int milis);
 void _delay_ms(const int delay);
 void delayMicroseconds(unsigned long);
 uint32_t millis();

Marlin/src/HAL/LINUX/include/serial.h

@@ -25,6 +25,7 @@
 #if ENABLED(EMERGENCY_PARSER)
   #include "../../../feature/e_parser.h"
 #endif
+#include "../../../core/serial_hook.h"
 
 #include <stdarg.h>
 #include <stdio.h>
@@ -33,7 +34,6 @@
  * Generic RingBuffer
  * T type of the buffer array
  * S size of the buffer (must be power of 2)
- *
  */
 template <typename T, uint32_t S> class RingBuffer {
 public:
@@ -74,18 +74,11 @@ private:
   volatile uint32_t index_read;
 };
 
-class HalSerial {
-public:
-
-  #if ENABLED(EMERGENCY_PARSER)
-    EmergencyParser::State emergency_state;
-  #endif
-
+struct HalSerial {
   HalSerial() { host_connected = true; }
 
   void begin(int32_t) {}
-
-  void end() {}
+  void end()          {}
 
   int peek() {
     uint8_t value;
@@ -100,7 +93,7 @@ public:
     return transmit_buffer.write(c);
   }
 
-  operator bool() { return host_connected; }
+  bool connected() { return host_connected; }
 
   uint16_t available() {
     return (uint16_t)receive_buffer.available();
@@ -117,92 +110,9 @@ public:
       while (transmit_buffer.available()) { /* nada */ }
   }
 
-  void printf(const char *format, ...) {
-    static char buffer[256];
-    va_list vArgs;
-    va_start(vArgs, format);
-    int length = vsnprintf((char *) buffer, 256, (char const *) format, vArgs);
-    va_end(vArgs);
-    if (length > 0 && length < 256) {
-      if (host_connected) {
-        for (int i = 0; i < length;) {
-          if (transmit_buffer.write(buffer[i])) {
-            ++i;
-          }
-        }
-      }
-    }
-  }
-
-  #define DEC 10
-  #define HEX 16
-  #define OCT 8
-  #define BIN 2
-
-  void print_bin(uint32_t value, uint8_t num_digits) {
-    uint32_t mask = 1 << (num_digits -1);
-    for (uint8_t i = 0; i < num_digits; i++) {
-      if (!(i %  4) && i) write(' ');
-      if (!(i % 16) && i) write(' ');
-      if (value & mask)   write('1');
-      else                write('0');
-      value <<= 1;
-    }
-  }
-
-  void print(const char value[]) { printf("%s" , value); }
-  void print(char value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 8);
-    else if (nbase == OCT) printf("%3o", value);
-    else if (nbase == HEX) printf("%2X", value);
-    else if (nbase == DEC ) printf("%d", value);
-    else printf("%c" , value);
-  }
-  void print(unsigned char value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 8);
-    else if (nbase == OCT) printf("%3o", value);
-    else if (nbase == HEX) printf("%2X", value);
-    else printf("%u" , value);
-  }
-  void print(int value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 16);
-    else if (nbase == OCT) printf("%6o", value);
-    else if (nbase == HEX) printf("%4X", value);
-    else printf("%d", value);
-  }
-  void print(unsigned int value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 16);
-    else if (nbase == OCT) printf("%6o", value);
-    else if (nbase == HEX) printf("%4X", value);
-    else printf("%u" , value);
-  }
-  void print(long value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 32);
-    else if (nbase == OCT) printf("%11o", value);
-    else if (nbase == HEX) printf("%8X", value);
-    else printf("%ld" , value);
-  }
-  void print(unsigned long value, int nbase = 0) {
-    if (nbase == BIN) print_bin(value, 32);
-    else if (nbase == OCT) printf("%11o", value);
-    else if (nbase == HEX) printf("%8X", value);
-    else printf("%lu" , value);
-  }
-  void print(float value, int round = 6)  { printf("%f" , value); }
-  void print(double value, int round = 6) { printf("%f" , value); }
-
-  void println(const char value[]) { printf("%s\n" , value); }
-  void println(char value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned char value, int nbase = 0) { print(value, nbase); println(); }
-  void println(int value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned int value, int nbase = 0) { print(value, nbase); println(); }
-  void println(long value, int nbase = 0) { print(value, nbase); println(); }
-  void println(unsigned long value, int nbase = 0) { print(value, nbase); println(); }
-  void println(float value, int round = 6) { printf("%f\n" , value); }
-  void println(double value, int round = 6) { printf("%f\n" , value); }
-  void println() { print('\n'); }
-
   volatile RingBuffer<uint8_t, 128> receive_buffer;
   volatile RingBuffer<uint8_t, 128> transmit_buffer;
   volatile bool host_connected;
 };
+
+typedef Serial1Class<HalSerial> MSerialT;

Marlin/src/HAL/LINUX/main.cpp

@@ -1,6 +1,5 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
@@ -19,22 +18,23 @@
  */
 #ifdef __PLAT_LINUX__
 
-extern void setup();
-extern void loop();
-
-#include <thread>
-
-#include <iostream>
-#include <fstream>
+//#define GPIO_LOGGING // Full GPIO and Positional Logging
 
 #include "../../inc/MarlinConfig.h"
-#include <stdio.h>
-#include <stdarg.h>
 #include "../shared/Delay.h"
 #include "hardware/IOLoggerCSV.h"
 #include "hardware/Heater.h"
 #include "hardware/LinearAxis.h"
 
+#include <stdio.h>
+#include <stdarg.h>
+#include <thread>
+#include <iostream>
+#include <fstream>
+
+extern void setup();
+extern void loop();
+
 // simple stdout / stdin implementation for fake serial port
 void write_serial_thread() {
   for (;;) {
@@ -64,8 +64,6 @@ void simulation_loop() {
   LinearAxis z_axis(Z_ENABLE_PIN, Z_DIR_PIN, Z_STEP_PIN, Z_MIN_PIN, Z_MAX_PIN);
   LinearAxis extruder0(E0_ENABLE_PIN, E0_DIR_PIN, E0_STEP_PIN, P_NC, P_NC);
 
-  //#define GPIO_LOGGING // Full GPIO and Positional Logging
-
   #ifdef GPIO_LOGGING
     IOLoggerCSV logger("all_gpio_log.csv");
     Gpio::attachLogger(&logger);
@@ -88,7 +86,7 @@ void simulation_loop() {
 
     #ifdef GPIO_LOGGING
       if (x_axis.position != x || y_axis.position != y || z_axis.position != z) {
-        uint64_t update = MAX3(x_axis.last_update, y_axis.last_update, z_axis.last_update);
+        uint64_t update = _MAX(x_axis.last_update, y_axis.last_update, z_axis.last_update);
         position_log << update << ", " << x_axis.position << ", " << y_axis.position << ", " << z_axis.position << std::endl;
         position_log.flush();
         x = x_axis.position;
@@ -107,8 +105,8 @@ int main() {
   std::thread write_serial (write_serial_thread);
   std::thread read_serial (read_serial_thread);
 
-  #if NUM_SERIAL > 0
-    MYSERIAL0.begin(BAUDRATE);
+  #ifdef MYSERIAL1
+    MYSERIAL1.begin(BAUDRATE);
     SERIAL_ECHOLNPGM("x86_64 Initialized");
     SERIAL_FLUSHTX();
   #endif

Marlin/src/HAL/LINUX/pinsDebug.h

@@ -26,15 +26,15 @@
  */
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define pwm_details(pin) pin = pin    // do nothing  // print PWM details
-#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define pwm_details(pin)    NOOP          // (do nothing)
+#define pwm_status(pin)     false         // Print a pin's PWM status. Return true if it's currently a PWM pin.
+#define IS_ANALOG(P)        (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p)  digitalRead(p)
 #define PRINT_PORT(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
+#define GET_ARRAY_PIN(p)    pin_array[p].pin
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+#define PRINT_PIN(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define MULTI_NAME_PAD  16 // space needed to be pretty if not first name assigned to a pin
 
 // active ADC function/mode/code values for PINSEL registers
 constexpr int8_t ADC_pin_mode(pin_t pin) {

Marlin/src/HAL/LINUX/servo_private.h

@@ -45,7 +45,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <stdint.h>

Marlin/src/HAL/LINUX/spi_pins.h

@@ -24,31 +24,32 @@
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 
-#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use
                             // spiBeginTransaction.
 #endif
 
-/** onboard SD card */
-//#define SCK_PIN           P0_07
-//#define MISO_PIN          P0_08
-//#define MOSI_PIN          P0_09
-//#define SS_PIN            P0_06
-/** external */
-#ifndef SCK_PIN
-  #define SCK_PIN           50
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+//#define SD_SS_PIN      P0_06
+
+// External SD
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN        50
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN          51
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN       51
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN          52
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN       52
 #endif
-#ifndef SS_PIN
-  #define SS_PIN            53
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN         53
 #endif
 #ifndef SDSS
-  #define SDSS              SS_PIN
+  #define SDSS       SD_SS_PIN
 #endif

Marlin/src/HAL/LINUX/watchdog.cpp

@@ -27,6 +27,8 @@
 
 #include "watchdog.h"
 
+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {}
 void HAL_watchdog_refresh() {}
 

Marlin/src/HAL/LINUX/watchdog.h

@@ -21,7 +21,5 @@
  */
 #pragma once
 
-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();

Marlin/src/HAL/LPC1768/DebugMonitor.cpp

@@ -1,322 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC1768
-
-#include "../../core/macros.h"
-#include "../../core/serial.h"
-#include <stdarg.h>
-
-#include "../shared/backtrace/unwinder.h"
-#include "../shared/backtrace/unwmemaccess.h"
-#include "watchdog.h"
-#include <debug_frmwrk.h>
-
-
-// Debug monitor that dumps to the Programming port all status when
-// an exception or WDT timeout happens - And then resets the board
-
-// All the Monitor routines must run with interrupts disabled and
-// under an ISR execution context. That is why we cannot reuse the
-// Serial interrupt routines or any C runtime, as we don't know the
-// state we are when running them
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() __asm__ volatile("": : :"memory");
-
-// (re)initialize UART0 as a monitor output to 250000,n,8,1
-static void TXBegin() {
-}
-
-// Send character through UART with no interrupts
-static void TX(char c) {
-  _DBC(c);
-}
-
-// Send String through UART
-static void TX(const char* s) {
-  while (*s) TX(*s++);
-}
-
-static void TXDigit(uint32_t d) {
-  if (d < 10) TX((char)(d+'0'));
-  else if (d < 16) TX((char)(d+'A'-10));
-  else TX('?');
-}
-
-// Send Hex number thru UART
-static void TXHex(uint32_t v) {
-  TX("0x");
-  for (uint8_t i = 0; i < 8; i++, v <<= 4)
-    TXDigit((v >> 28) & 0xF);
-}
-
-// Send Decimal number thru UART
-static void TXDec(uint32_t v) {
-  if (!v) {
-    TX('0');
-    return;
-  }
-
-  char nbrs[14];
-  char *p = &nbrs[0];
-  while (v != 0) {
-    *p++ = '0' + (v % 10);
-    v /= 10;
-  }
-  do {
-    p--;
-    TX(*p);
-  } while (p != &nbrs[0]);
-}
-
-// Dump a backtrace entry
-static bool UnwReportOut(void* ctx, const UnwReport* bte) {
-  int* p = (int*)ctx;
-
-  (*p)++;
-  TX('#'); TXDec(*p); TX(" : ");
-  TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
-  TX('+'); TXDec(bte->address - bte->function);
-  TX(" PC:");TXHex(bte->address); TX('\n');
-  return true;
-}
-
-#ifdef UNW_DEBUG
-  void UnwPrintf(const char* format, ...) {
-    char dest[256];
-    va_list argptr;
-    va_start(argptr, format);
-    vsprintf(dest, format, argptr);
-    va_end(argptr);
-    TX(&dest[0]);
-  }
-#endif
-
-/* Table of function pointers for passing to the unwinder */
-static const UnwindCallbacks UnwCallbacks = {
-  UnwReportOut,
-  UnwReadW,
-  UnwReadH,
-  UnwReadB
-  #ifdef UNW_DEBUG
-   ,UnwPrintf
-  #endif
-};
-
-
-/**
- * HardFaultHandler_C:
- * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
- * as the parameter. We can then read the values from the stack and place them
- * into local variables for ease of reading.
- * We then read the various Fault Status and Address Registers to help decode
- * cause of the fault.
- * The function ends with a BKPT instruction to force control back into the debugger
- */
-extern "C"
-void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
-
-  static const char* causestr[] = {
-    "NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
-  };
-
-  UnwindFrame btf;
-
-  // Dump report to the Programming port (interrupts are DISABLED)
-  TXBegin();
-  TX("\n\n## Software Fault detected ##\n");
-  TX("Cause: "); TX(causestr[cause]); TX('\n');
-
-  TX("R0   : "); TXHex(((unsigned long)sp[0])); TX('\n');
-  TX("R1   : "); TXHex(((unsigned long)sp[1])); TX('\n');
-  TX("R2   : "); TXHex(((unsigned long)sp[2])); TX('\n');
-  TX("R3   : "); TXHex(((unsigned long)sp[3])); TX('\n');
-  TX("R12  : "); TXHex(((unsigned long)sp[4])); TX('\n');
-  TX("LR   : "); TXHex(((unsigned long)sp[5])); TX('\n');
-  TX("PC   : "); TXHex(((unsigned long)sp[6])); TX('\n');
-  TX("PSR  : "); TXHex(((unsigned long)sp[7])); TX('\n');
-
-  // Configurable Fault Status Register
-  // Consists of MMSR, BFSR and UFSR
-  TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
-
-  // Hard Fault Status Register
-  TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
-
-  // Debug Fault Status Register
-  TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
-
-  // Auxiliary Fault Status Register
-  TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
-
-  // Read the Fault Address Registers. These may not contain valid values.
-  // Check BFARVALID/MMARVALID to see if they are valid values
-  // MemManage Fault Address Register
-  TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
-
-  // Bus Fault Address Register
-  TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
-
-  TX("ExcLR: "); TXHex(lr); TX('\n');
-  TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
-
-  btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
-  btf.fp = btf.sp;
-  btf.lr = ((unsigned long)sp[5]);
-  btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
-
-  // Perform a backtrace
-  TX("\nBacktrace:\n\n");
-  int ctr = 0;
-  UnwindStart(&btf, &UnwCallbacks, &ctr);
-
-  // Disable all NVIC interrupts
-  NVIC->ICER[0] = 0xFFFFFFFF;
-  NVIC->ICER[1] = 0xFFFFFFFF;
-
-  // Relocate VTOR table to default position
-  SCB->VTOR = 0;
-
-  // Clear cause of reset to prevent entering smoothie bootstrap
-  HAL_clear_reset_source();
-
-  // Restart watchdog
-  #if ENABLED(USE_WATCHDOG)
-    //WDT_Restart(WDT);
-    watchdog_init();
-  #endif
-
-  // Reset controller
-  NVIC_SystemReset();
-
-  // Nothing below here is compiled because NVIC_SystemReset loops forever
-
-  for (;;) { TERN_(USE_WATCHDOG, watchdog_init()); }
-}
-
-extern "C" {
-__attribute__((naked)) void NMI_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#0")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void HardFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#1")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void MemManage_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#2")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void BusFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#3")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void UsageFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#4")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void DebugMon_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#5")
-    A("b HardFault_HandlerC")
-  );
-}
-
-/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
-__attribute__((naked)) void WDT_IRQHandler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#6")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void RSTC_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#7")
-    A("b HardFault_HandlerC")
-  );
-}
-}
-#endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/HAL.cpp

@@ -29,21 +29,18 @@
   #include "watchdog.h"
 #endif
 
+DefaultSerial1 USBSerial(false, UsbSerial);
+
 uint32_t HAL_adc_reading = 0;
 
 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//
 
 // return free heap space
@@ -66,7 +63,12 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
   return ind > -1 ? ind : dval;
 }
 
-void flashFirmware(const int16_t) { NVIC_SystemReset(); }
+void flashFirmware(const int16_t) {
+  delay(500);          // Give OS time to disconnect
+  USB_Connect(false);  // USB clear connection
+  delay(1000);         // Give OS time to notice
+  HAL_reboot();
+}
 
 void HAL_clear_reset_source(void) {
   TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag());
@@ -79,4 +81,6 @@ uint8_t HAL_get_reset_source(void) {
   return RST_POWER_ON;
 }
 
+void HAL_reboot() { NVIC_SystemReset(); }
+
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/HAL.h

@@ -47,9 +47,6 @@ extern "C" volatile uint32_t _millis;
 #include <pinmapping.h>
 #include <CDCSerial.h>
 
-// i2c uses 8-bit shifted address
-#define I2C_ADDRESS(A) uint8_t((A) << 1)
-
 //
 // Default graphical display delays
 //
@@ -63,58 +60,60 @@ extern "C" volatile uint32_t _millis;
   #define ST7920_DELAY_3 DELAY_NS(750)
 #endif
 
+typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
+extern DefaultSerial1 USBSerial;
+
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
+
 #if SERIAL_PORT == -1
-  #define MYSERIAL0 UsbSerial
-#elif SERIAL_PORT == 0
-  #define MYSERIAL0 MSerial
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 MSerial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 MSerial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 MSerial3
+  #define MYSERIAL1 USBSerial
+#elif WITHIN(SERIAL_PORT, 0, 3)
+  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1
-    #define MYSERIAL1 UsbSerial
-  #elif SERIAL_PORT_2 == 0
-    #define MYSERIAL1 MSerial
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 MSerial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 MSerial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 MSerial3
+  #if SERIAL_PORT_2 == -1
+    #define MYSERIAL2 USBSerial
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
+    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL UsbSerial
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL MSerial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL MSerial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL MSerial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL MSerial3
+#ifdef SERIAL_PORT_3
+  #if SERIAL_PORT_3 == -1
+    #define MYSERIAL3 USBSerial
+  #elif WITHIN(SERIAL_PORT_3, 0, 3)
+    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if MMU2_SERIAL_PORT == -1
+    #define MMU2_SERIAL USBSerial
+  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #else
+    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
+  #endif
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if LCD_SERIAL_PORT == -1
+    #define LCD_SERIAL USBSerial
+  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #else
+    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
+  #endif
+  #if HAS_DGUS_LCD
+    #define SERIAL_GET_TX_BUFFER_FREE() MSerial0.available()
   #endif
 #endif
 
@@ -130,10 +129,16 @@ extern "C" volatile uint32_t _millis;
 //
 // Utility functions
 //
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 //
 // ADC API
@@ -223,7 +228,4 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255,
 void HAL_clear_reset_source(void);
 uint8_t HAL_get_reset_source(void);
 
-// Add strcmp_P if missing
-#ifndef strcmp_P
-  #define strcmp_P(a, b) strcmp((a), (b))
-#endif
+void HAL_reboot();

Marlin/src/HAL/LPC1768/HAL_MinSerial.cpp

@@ -0,0 +1,51 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef TARGET_LPC1768
+
+#include "../../inc/MarlinConfig.h"
+#include "HAL.h"
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+
+#include "../shared/HAL_MinSerial.h"
+#include <debug_frmwrk.h>
+
+static void TX(char c) { _DBC(c); }
+void install_min_serial() { HAL_min_serial_out = &TX; }
+
+#if DISABLED(DYNAMIC_VECTORTABLE)
+extern "C" {
+  __attribute__((naked)) void JumpHandler_ASM() {
+    __asm__ __volatile__ (
+      "b CommonHandler_ASM\n"
+    );
+  }
+  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
+}
+#endif
+
+#endif // POSTMORTEM_DEBUGGING
+#endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/HAL_SPI.cpp

@@ -30,7 +30,7 @@
  */
 
 /**
- * Hardware SPI and a software SPI implementations are included in this file.
+ * Hardware SPI and Software SPI implementations are included in this file.
  * The hardware SPI runs faster and has higher throughput but is not compatible
  * with some LCD interfaces/adapters.
  *
@@ -39,10 +39,10 @@
  * Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
  * SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
  * WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
- * active.  If any of these pins are shared then the software SPI must be used.
+ * active. If any of these pins are shared then the software SPI must be used.
  *
- * A more sophisticated hardware SPI can be found at the following link.  This
- * implementation has not been fully debugged.
+ * A more sophisticated hardware SPI can be found at the following link.
+ * This implementation has not been fully debugged.
  * https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
  */
 
@@ -51,27 +51,37 @@
 #include "../../inc/MarlinConfig.h"
 #include <SPI.h>
 
+// Hardware SPI and SPIClass
+#include <lpc17xx_pinsel.h>
+#include <lpc17xx_clkpwr.h>
+
+#include "../shared/HAL_SPI.h"
+
 // ------------------------
 // Public functions
 // ------------------------
 #if ENABLED(LPC_SOFTWARE_SPI)
 
-  #include <SoftwareSPI.h>
-
   // Software SPI
 
-  static uint8_t SPI_speed = 0;
+  #include <SoftwareSPI.h>
+
+  #ifndef HAL_SPI_SPEED
+    #define HAL_SPI_SPEED SPI_FULL_SPEED
+  #endif
+
+  static uint8_t SPI_speed = HAL_SPI_SPEED;
 
   static uint8_t spiTransfer(uint8_t b) {
-    return swSpiTransfer(b, SPI_speed, SCK_PIN, MISO_PIN, MOSI_PIN);
+    return swSpiTransfer(b, SPI_speed, SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
   }
 
   void spiBegin() {
-    swSpiBegin(SCK_PIN, MISO_PIN, MOSI_PIN);
+    swSpiBegin(SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
   }
 
   void spiInit(uint8_t spiRate) {
-    SPI_speed = swSpiInit(spiRate, SCK_PIN, MOSI_PIN);
+    SPI_speed = swSpiInit(spiRate, SD_SCK_PIN, SD_MOSI_PIN);
   }
 
   uint8_t spiRec() { return spiTransfer(0xFF); }
@@ -83,12 +93,12 @@
 
   void spiSend(uint8_t b) { (void)spiTransfer(b); }
 
-  void spiSend(const uint8_t* buf, size_t nbyte) {
+  void spiSend(const uint8_t *buf, size_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       (void)spiTransfer(buf[i]);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     (void)spiTransfer(token);
     for (uint16_t i = 0; i < 512; i++)
       (void)spiTransfer(buf[i]);
@@ -96,91 +106,42 @@
 
 #else
 
-  // Hardware SPI
-
-  #include <lpc17xx_pinsel.h>
-  #include <lpc17xx_ssp.h>
-  #include <lpc17xx_clkpwr.h>
-
-  // decide which HW SPI device to use
-  #ifndef LPC_HW_SPI_DEV
-    #if (SCK_PIN == P0_07 && MISO_PIN == P0_08 && MOSI_PIN == P0_09)
-      #define LPC_HW_SPI_DEV 1
+  #ifndef HAL_SPI_SPEED
+    #ifdef SD_SPI_SPEED
+      #define HAL_SPI_SPEED SD_SPI_SPEED
     #else
-      #if (SCK_PIN == P0_15 && MISO_PIN == P0_17 && MOSI_PIN == P0_18)
-        #define LPC_HW_SPI_DEV 0
-      #else
-        #error "Invalid pins selected for hardware SPI"
-      #endif
+      #define HAL_SPI_SPEED SPI_FULL_SPEED
     #endif
   #endif
-  #if (LPC_HW_SPI_DEV == 0)
-    #define LPC_SSPn LPC_SSP0
-  #else
-    #define LPC_SSPn LPC_SSP1
-  #endif
 
-  void spiBegin() {  // setup SCK, MOSI & MISO pins for SSP0
-    PINSEL_CFG_Type PinCfg;  // data structure to hold init values
-    PinCfg.Funcnum = 2;
-    PinCfg.OpenDrain = 0;
-    PinCfg.Pinmode = 0;
-    PinCfg.Pinnum = LPC176x::pin_bit(SCK_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(SCK_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(SCK_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(MISO_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(MISO_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_INPUT(MISO_PIN);
-
-    PinCfg.Pinnum = LPC176x::pin_bit(MOSI_PIN);
-    PinCfg.Portnum = LPC176x::pin_port(MOSI_PIN);
-    PINSEL_ConfigPin(&PinCfg);
-    SET_OUTPUT(MOSI_PIN);
-    // divide PCLK by 2 for SSP0
-    CLKPWR_SetPCLKDiv(LPC_HW_SPI_DEV == 0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
-    spiInit(0);
-    SSP_Cmd(LPC_SSPn, ENABLE);  // start SSP running
-  }
+  void spiBegin() { spiInit(HAL_SPI_SPEED); } // Set up SCK, MOSI & MISO pins for SSP0
 
   void spiInit(uint8_t spiRate) {
-    // table to convert Marlin spiRates (0-5 plus default) into bit rates
-    uint32_t Marlin_speed[7]; // CPSR is always 2
-    Marlin_speed[0] = 8333333; //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
-    Marlin_speed[1] = 4166667; //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
-    Marlin_speed[2] = 2083333; //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
-    Marlin_speed[3] = 1000000; //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
-    Marlin_speed[4] =  500000; //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
-    Marlin_speed[5] =  250000; //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
-    Marlin_speed[6] =  125000; //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
-    // setup for SPI mode
-    SSP_CFG_Type HW_SPI_init; // data structure to hold init values
-    SSP_ConfigStructInit(&HW_SPI_init);  // set values for SPI mode
-    HW_SPI_init.ClockRate = Marlin_speed[_MIN(spiRate, 6)]; // put in the specified bit rate
-    HW_SPI_init.Mode |= SSP_CR1_SSP_EN;
-    SSP_Init(LPC_SSPn, &HW_SPI_init);  // puts the values into the proper bits in the SSP0 registers
+    #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
+      SPI.setModule(1);
+    #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
+      SPI.setModule(2);
+    #endif
+    SPI.setDataSize(DATA_SIZE_8BIT);
+    SPI.setDataMode(SPI_MODE0);
+
+    SPI.setClock(SPISettings::spiRate2Clock(spiRate));
+    SPI.begin();
   }
 
   static uint8_t doio(uint8_t b) {
-    /* send and receive a single byte */
-    SSP_SendData(LPC_SSPn, b & 0x00FF);
-    while (SSP_GetStatus(LPC_SSPn, SSP_STAT_BUSY));  // wait for it to finish
-    return SSP_ReceiveData(LPC_SSPn) & 0x00FF;
+    return SPI.transfer(b & 0x00FF) & 0x00FF;
   }
 
   void spiSend(uint8_t b) { doio(b); }
 
-  void spiSend(const uint8_t* buf, size_t nbyte) {
+  void spiSend(const uint8_t *buf, size_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
   }
 
-  void spiSend(uint32_t chan, byte b) {
-  }
+  void spiSend(uint32_t chan, byte b) {}
 
-  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
-  }
+  void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {}
 
   // Read single byte from SPI
   uint8_t spiRec() { return doio(0xFF); }
@@ -192,49 +153,260 @@
     for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
   }
 
-  static uint8_t spiTransfer(uint8_t b) {
-    return doio(b);
-  }
+  uint8_t spiTransfer(uint8_t b) { return doio(b); }
 
   // Write from buffer to SPI
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
    (void)spiTransfer(token);
     for (uint16_t i = 0; i < 512; i++)
       (void)spiTransfer(buf[i]);
   }
 
-  /** Begin SPI transaction, set clock, bit order, data mode */
+  // Begin SPI transaction, set clock, bit order, data mode
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
-    // TODO: to be implemented
-
+    // TODO: Implement this method
   }
 
 #endif // LPC_SOFTWARE_SPI
 
-void SPIClass::begin() { spiBegin(); }
+/**
+ * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
+ */
+static inline void waitSpiTxEnd(LPC_SSP_TypeDef *spi_d) {
+  while (SSP_GetStatus(spi_d, SSP_STAT_TXFIFO_EMPTY) == RESET) { /* nada */ } // wait until TXE=1
+  while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ }     // wait until BSY=0
+}
+
+// Retain the pin init state of the SPI, to avoid init more than once,
+// even if more instances of SPIClass exist
+static bool spiInitialised[BOARD_NR_SPI] = { false };
+
+SPIClass::SPIClass(uint8_t device) {
+  // Init things specific to each SPI device
+  // clock divider setup is a bit of hack, and needs to be improved at a later date.
+
+  #if BOARD_NR_SPI >= 1
+    _settings[0].spi_d = LPC_SSP0;
+    _settings[0].dataMode = SPI_MODE0;
+    _settings[0].dataSize = DATA_SIZE_8BIT;
+    _settings[0].clock = SPI_CLOCK_MAX;
+    //_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
+  #endif
+
+  #if BOARD_NR_SPI >= 2
+    _settings[1].spi_d = LPC_SSP1;
+    _settings[1].dataMode = SPI_MODE0;
+    _settings[1].dataSize = DATA_SIZE_8BIT;
+    _settings[1].clock = SPI_CLOCK_MAX;
+    //_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
+  #endif
+
+  setModule(device);
+
+  // Init the GPDMA controller
+  // TODO: call once in the constructor? or each time?
+  GPDMA_Init();
+}
+
+SPIClass::SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel) {
+  #if BOARD_NR_SPI >= 1
+    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
+  #endif
+  #if BOARD_NR_SPI >= 2
+    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
+  #endif
+}
+
+void SPIClass::begin() {
+  // Init the SPI pins in the first begin call
+  if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
+      (_currentSetting->spi_d == LPC_SSP1 && spiInitialised[1] == false)) {
+    pin_t sck, miso, mosi;
+    if (_currentSetting->spi_d == LPC_SSP0) {
+      sck = BOARD_SPI1_SCK_PIN;
+      miso = BOARD_SPI1_MISO_PIN;
+      mosi = BOARD_SPI1_MOSI_PIN;
+      spiInitialised[0] = true;
+    }
+    else if (_currentSetting->spi_d == LPC_SSP1) {
+      sck = BOARD_SPI2_SCK_PIN;
+      miso = BOARD_SPI2_MISO_PIN;
+      mosi = BOARD_SPI2_MOSI_PIN;
+      spiInitialised[1] = true;
+    }
+    PINSEL_CFG_Type PinCfg;  // data structure to hold init values
+    PinCfg.Funcnum = 2;
+    PinCfg.OpenDrain = 0;
+    PinCfg.Pinmode = 0;
+    PinCfg.Pinnum = LPC176x::pin_bit(sck);
+    PinCfg.Portnum = LPC176x::pin_port(sck);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_OUTPUT(sck);
+
+    PinCfg.Pinnum = LPC176x::pin_bit(miso);
+    PinCfg.Portnum = LPC176x::pin_port(miso);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_INPUT(miso);
+
+    PinCfg.Pinnum = LPC176x::pin_bit(mosi);
+    PinCfg.Portnum = LPC176x::pin_port(mosi);
+    PINSEL_ConfigPin(&PinCfg);
+    SET_OUTPUT(mosi);
+  }
+
+  updateSettings();
+  SSP_Cmd(_currentSetting->spi_d, ENABLE);  // start SSP running
+}
 
 void SPIClass::beginTransaction(const SPISettings &cfg) {
-  uint8_t spiRate;
-  switch (cfg.spiRate()) {
-    case 8000000: spiRate = 0; break;
-    case 4000000: spiRate = 1; break;
-    case 2000000: spiRate = 2; break;
-    case 1000000: spiRate = 3; break;
-    case  500000: spiRate = 4; break;
-    case  250000: spiRate = 5; break;
-    case  125000: spiRate = 6; break;
-    default: spiRate = 2; break;
-  }
-  spiInit(spiRate);
+  setBitOrder(cfg.bitOrder);
+  setDataMode(cfg.dataMode);
+  setDataSize(cfg.dataSize);
+  //setClockDivider(determine_baud_rate(_currentSetting->spi_d, settings.clock));
+  begin();
 }
 
-uint8_t SPIClass::transfer(const uint8_t B) { return spiTransfer(B); }
+uint8_t SPIClass::transfer(const uint16_t b) {
+  // Send and receive a single byte
+  SSP_ReceiveData(_currentSetting->spi_d); // read any previous data
+  SSP_SendData(_currentSetting->spi_d, b);
+  waitSpiTxEnd(_currentSetting->spi_d);  // wait for it to finish
+  return SSP_ReceiveData(_currentSetting->spi_d);
+}
 
 uint16_t SPIClass::transfer16(const uint16_t data) {
-  return (transfer((data >> 8) & 0xFF) << 8)
-       | (transfer(data & 0xFF) & 0xFF);
+  return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
 }
 
-SPIClass SPI;
+void SPIClass::end() {
+  // Neither is needed for Marlin
+  //SSP_Cmd(_currentSetting->spi_d, DISABLE);
+  //SSP_DeInit(_currentSetting->spi_d);
+}
+
+void SPIClass::send(uint8_t data) {
+  SSP_SendData(_currentSetting->spi_d, data);
+}
+
+void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
+  //TODO: LPC dma can only write 0xFFF bytes at once.
+  GPDMA_Channel_CFG_Type GPDMACfg;
+
+  /* Configure GPDMA channel 0 -------------------------------------------------------------*/
+  /* DMA Channel 0 */
+  GPDMACfg.ChannelNum = 0;
+  // Source memory
+  GPDMACfg.SrcMemAddr = (uint32_t)buf;
+  // Destination memory - Not used
+  GPDMACfg.DstMemAddr = 0;
+  // Transfer size
+  GPDMACfg.TransferSize = length;
+  // Transfer width
+  GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
+  // Transfer type
+  GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
+  // Source connection - unused
+  GPDMACfg.SrcConn = 0;
+  // Destination connection
+  GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
+
+  GPDMACfg.DMALLI = 0;
+
+  // Enable dma on SPI
+  SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
+
+  // Only increase memory if minc is true
+  GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
+
+  // Setup channel with given parameter
+  GPDMA_Setup(&GPDMACfg);
+
+  // Enable DMA
+  GPDMA_ChannelCmd(0, ENABLE);
+
+  // Wait for data transfer
+  while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
+
+  // Clear err and int
+  GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
+  GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
+
+  // Disable DMA
+  GPDMA_ChannelCmd(0, DISABLE);
+
+  waitSpiTxEnd(_currentSetting->spi_d);
+
+  SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
+}
+
+uint16_t SPIClass::read() {
+  return SSP_ReceiveData(_currentSetting->spi_d);
+}
+
+void SPIClass::read(uint8_t *buf, uint32_t len) {
+  for (uint16_t i = 0; i < len; i++) buf[i] = transfer(0xFF);
+}
+
+void SPIClass::setClock(uint32_t clock) { _currentSetting->clock = clock; }
+
+void SPIClass::setModule(uint8_t device) { _currentSetting = &_settings[device - 1]; } // SPI channels are called 1, 2, and 3 but the array is zero-indexed
+
+void SPIClass::setBitOrder(uint8_t bitOrder) { _currentSetting->bitOrder = bitOrder; }
+
+void SPIClass::setDataMode(uint8_t dataMode) { _currentSetting->dataMode = dataMode; }
+
+void SPIClass::setDataSize(uint32_t dataSize) { _currentSetting->dataSize = dataSize; }
+
+/**
+ * Set up/tear down
+ */
+void SPIClass::updateSettings() {
+  //SSP_DeInit(_currentSetting->spi_d); //todo: need force de init?!
+
+  // Divide PCLK by 2 for SSP0
+  //CLKPWR_SetPCLKDiv(_currentSetting->spi_d == LPC_SSP0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
+
+  SSP_CFG_Type HW_SPI_init; // data structure to hold init values
+  SSP_ConfigStructInit(&HW_SPI_init);  // set values for SPI mode
+  HW_SPI_init.ClockRate = _currentSetting->clock;
+  HW_SPI_init.Databit = _currentSetting->dataSize;
+
+  /**
+   * SPI Mode  CPOL  CPHA  Shift SCK-edge  Capture SCK-edge
+   * 0       0     0     Falling     Rising
+   * 1       0     1     Rising      Falling
+   * 2       1     0     Rising      Falling
+   * 3       1     1     Falling     Rising
+   */
+  switch (_currentSetting->dataMode) {
+    case SPI_MODE0:
+      HW_SPI_init.CPHA = SSP_CPHA_FIRST;
+      HW_SPI_init.CPOL = SSP_CPOL_HI;
+      break;
+    case SPI_MODE1:
+      HW_SPI_init.CPHA = SSP_CPHA_SECOND;
+      HW_SPI_init.CPOL = SSP_CPOL_HI;
+      break;
+    case SPI_MODE2:
+      HW_SPI_init.CPHA = SSP_CPHA_FIRST;
+      HW_SPI_init.CPOL = SSP_CPOL_LO;
+      break;
+    case SPI_MODE3:
+      HW_SPI_init.CPHA = SSP_CPHA_SECOND;
+      HW_SPI_init.CPOL = SSP_CPOL_LO;
+      break;
+    default:
+      break;
+  }
+
+  // TODO: handle bitOrder
+  SSP_Init(_currentSetting->spi_d, &HW_SPI_init);  // puts the values into the proper bits in the SSP0 registers
+}
+
+#if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
+  SPIClass SPI(1);
+#elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
+  SPIClass SPI(2);
+#endif
 
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/MarlinSPI.h

@@ -21,26 +21,25 @@
  */
 #pragma once
 
+#include <SPI.h>
+
 /**
- * @file tft_lvgl_configuration.h
- * @date    2020-02-21
- * */
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
 
-//#ifdef __cplusplus
-//extern "C" {
-//#endif
-
-#include <lvgl.h>
-
-void tft_lvgl_init();
-void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p);
-bool my_touchpad_read(lv_indev_drv_t * indev_driver, lv_indev_data_t * data);
-
-void LCD_Clear(uint16_t Color);
-void tft_set_point(uint16_t x, uint16_t y, uint16_t point);
-void ili9320_SetWindows(uint16_t StartX, uint16_t StartY, uint16_t width, uint16_t heigh);
-void LCD_WriteRAM_Prepare(void);
-
-//#ifdef __cplusplus
-//} /* extern "C" */
-//#endif
+using MarlinSPI = SPIClass;

Marlin/src/HAL/LPC1768/MarlinSerial.cpp

@@ -21,35 +21,51 @@
  */
 #ifdef TARGET_LPC1768
 
-#include "../../inc/MarlinConfigPre.h"
 #include "MarlinSerial.h"
 
-#if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0)
-  MarlinSerial MSerial(LPC_UART0);
-  extern "C" void UART0_IRQHandler() {
-    MSerial.IRQHandler();
-  }
+#include "../../inc/MarlinConfig.h"
+
+#if USING_HW_SERIAL0
+  MarlinSerial _MSerial0(LPC_UART0);
+  MSerialT MSerial0(true, _MSerial0);
+  extern "C" void UART0_IRQHandler() { _MSerial0.IRQHandler(); }
+#endif
+#if USING_HW_SERIAL1
+  MarlinSerial _MSerial1((LPC_UART_TypeDef *) LPC_UART1);
+  MSerialT MSerial1(true, _MSerial1);
+  extern "C" void UART1_IRQHandler() { _MSerial1.IRQHandler(); }
+#endif
+#if USING_HW_SERIAL2
+  MarlinSerial _MSerial2(LPC_UART2);
+  MSerialT MSerial2(true, _MSerial2);
+  extern "C" void UART2_IRQHandler() { _MSerial2.IRQHandler(); }
+#endif
+#if USING_HW_SERIAL3
+  MarlinSerial _MSerial3(LPC_UART3);
+  MSerialT MSerial3(true, _MSerial3);
+  extern "C" void UART3_IRQHandler() { _MSerial3.IRQHandler(); }
 #endif
 
-#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1
-  MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
-  extern "C" void UART1_IRQHandler() {
-    MSerial1.IRQHandler();
-  }
-#endif
+#if ENABLED(EMERGENCY_PARSER)
 
-#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2
-  MarlinSerial MSerial2(LPC_UART2);
-  extern "C" void UART2_IRQHandler() {
-    MSerial2.IRQHandler();
+  bool MarlinSerial::recv_callback(const char c) {
+    // Need to figure out which serial port we are and react in consequence (Marlin does not have CONTAINER_OF macro)
+    if (false) {}
+    #if USING_HW_SERIAL0
+      else if (this == &_MSerial0) emergency_parser.update(MSerial0.emergency_state, c);
+    #endif
+    #if USING_HW_SERIAL1
+      else if (this == &_MSerial1) emergency_parser.update(MSerial1.emergency_state, c);
+    #endif
+    #if USING_HW_SERIAL2
+      else if (this == &_MSerial2) emergency_parser.update(MSerial2.emergency_state, c);
+    #endif
+    #if USING_HW_SERIAL3
+      else if (this == &_MSerial3) emergency_parser.update(MSerial3.emergency_state, c);
+    #endif
+    return true;
   }
-#endif
 
-#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3
-  MarlinSerial MSerial3(LPC_UART3);
-  extern "C" void UART3_IRQHandler() {
-    MSerial3.IRQHandler();
-  }
 #endif
 
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/MarlinSerial.h

@@ -28,6 +28,7 @@
 #if ENABLED(EMERGENCY_PARSER)
   #include "../../feature/e_parser.h"
 #endif
+#include "../../core/serial_hook.h"
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -41,26 +42,26 @@
 
 class MarlinSerial : public HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE> {
 public:
-  MarlinSerial(LPC_UART_TypeDef *UARTx) :
-    HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE>(UARTx)
-    #if ENABLED(EMERGENCY_PARSER)
-      , emergency_state(EmergencyParser::State::EP_RESET)
-    #endif
-    { }
+  MarlinSerial(LPC_UART_TypeDef *UARTx) : HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE>(UARTx) { }
 
   void end() {}
 
   #if ENABLED(EMERGENCY_PARSER)
-    bool recv_callback(const char c) override {
-      emergency_parser.update(emergency_state, c);
-      return true; // do not discard character
-    }
-
-    EmergencyParser::State emergency_state;
+    bool recv_callback(const char c) override;
   #endif
 };
 
-extern MarlinSerial MSerial;
-extern MarlinSerial MSerial1;
-extern MarlinSerial MSerial2;
-extern MarlinSerial MSerial3;
+// On LPC176x framework, HardwareSerial does not implement the same interface as Arduino's Serial, so overloads
+// of 'available' and 'read' method are not used in this multiple inheritance scenario.
+// Instead, use a ForwardSerial here that adapts the interface.
+typedef ForwardSerial1Class<MarlinSerial> MSerialT;
+extern MSerialT MSerial0;
+extern MSerialT MSerial1;
+extern MSerialT MSerial2;
+extern MSerialT MSerial3;
+
+// Consequently, we can't use a RuntimeSerial either. The workaround would be to use
+// a RuntimeSerial<ForwardSerial<MarlinSerial>> type here. Ignore for now until it's actually required.
+#if ENABLED(SERIAL_RUNTIME_HOOK)
+  #error "SERIAL_RUNTIME_HOOK is not yet supported for LPC176x."
+#endif

Marlin/src/HAL/LPC1768/Servo.h

@@ -46,7 +46,6 @@
  *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
  *
  * The only modification was to update/delete macros to match the LPC176x.
- *
  */
 
 #include <Servo.h>