etc

reuse, update lcd_preheat
misc
2025-03-17 21:00:23 -05:00 · 2025-03-17 20:29:54 -05:00 · 2025-03-17 20:10:00 -05:00 · 2025-03-17 20:04:33 -05:00 · 2025-03-17 20:00:16 -05:00 · 2025-03-18 00:28:49 +00:00
1246 changed files with 54085 additions and 72927 deletions
@@ -0,0 +1,21 @@
+# Build artifacts
+buildroot/
+*.o
+*.a
+*.so
+*.dylib
+*.dll
+*.exe
+
+# Web assets
+*.min.js
+*.min.css
+
+# Generated files
+__pycache__/
+*.pyc
+.DS_Store
+
+# IDE files
+.vscode/
+.idea/
@@ -7,7 +7,7 @@ contact_links:
    url: https://www.facebook.com/groups/1049718498464482
    about: Please ask and answer questions here.
  - name: 🕹 Marlin on Discord
-    url: https://discord.gg/n5NJ59y
+    url: https://discord.com/servers/marlin-firmware-461605380783472640
    about: Join the Discord server for support and discussion.
  - name: 🔗 Marlin Discussion Forum
    url: https://reprap.org/forum/list.php?415
@@ -43,7 +43,7 @@ We have a Message Board and a Facebook group where our knowledgable user communi

 If chat is more your speed, you can join the MarlinFirmware Discord server:

-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Use the link https://discord.com/servers/marlin-firmware-461605380783472640 to join up as a General User.
 * Even though our Discord is pretty active, it may take a while for community members to respond &mdash; please be patient!
 * Use the `#general` channel for general questions or discussion about Marlin.
 * Other channels exist for certain topics or are limited to Patrons. Check the channel list.
@@ -14,7 +14,7 @@ jobs:
  autolabel:
    name: Auto Label
    if: github.repository == 'MarlinFirmware/Marlin'
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
    steps:
    - name: Auto Label for [BUG]
      uses: actions/github-script@v7
@@ -14,7 +14,7 @@ jobs:
    name: Bump Distribution Date
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:

@@ -18,7 +18,7 @@ jobs:
    name: PR Bad Target
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: superbrothers/close-pull-request@v3
@@ -34,14 +34,19 @@ jobs:
    name: Build Test
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    strategy:
+      fail-fast: true
      matrix:
        test-platform:

+        # RP2040
+        - SKR_Pico
+
        # Native
        - linux_native
+        - simulator_linux_release

        # AVR
        - mega2560
@@ -104,11 +109,11 @@ jobs:

        # STM32F4
        - ARMED
-        - BIGTREE_BTT002
-        - BIGTREE_GTR_V1_0
-        - BIGTREE_SKR_PRO
+        - BTT_BTT002
+        - BTT_GTR_V1_0
+        - BTT_SKR_PRO
        - FLYF407ZG
-        - FYSETC_S6
+        - STM32F446VE_fysetc
        - LERDGEK
        - LERDGEX
        - mks_robin_pro2
@@ -181,6 +186,14 @@ jobs:
        pio upgrade --dev
        pio pkg update --global

+    - name: Install Simulator dependencies
+      run: |
+        sudo apt-get update
+        sudo apt-get install build-essential
+        sudo apt-get install libsdl2-dev
+        sudo apt-get install libsdl2-net-dev
+        sudo apt-get install libglm-dev
+
    - name: Run ${{ matrix.test-platform }} Tests
      run: |
        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
@@ -36,7 +36,7 @@ jobs:
    # pulls them into additional branches.
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - name: Check out the PR
@@ -0,0 +1,48 @@
+#
+# ci-validate-boards.yml
+# Validate boards.h to make sure it's all set up correctly
+#
+
+name: CI - Validate boards.h
+
+# We can do the on: section as two items, one for pull requests and one for pushes...
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+  push:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+
+jobs:
+  validate_pins_files:
+    name: Validate boards.h
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Validate core/boards.h
+      run: |
+        make validate-boards -j
@@ -26,7 +26,7 @@ jobs:
    name: Validate Pins Files
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - name: Check out the PR
@@ -13,7 +13,7 @@ on:

 jobs:
  remove_label:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    strategy:
      matrix:
@@ -14,7 +14,7 @@ jobs:
    name: Close Stale Issues
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: actions/stale@v9
@@ -14,7 +14,7 @@ jobs:
    name: Lock Closed Issues
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: dessant/lock-threads@v5
@@ -14,7 +14,7 @@ jobs:
    name: Unlock Reopened
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: OSDKDev/unlock-issues@v1.1
@@ -125,6 +125,7 @@ vc-fileutils.settings
 # Visual Studio Code
 .vscode/*
 !.vscode/extensions.json
+*.code-workspace

 # Simulation files
 imgui.ini
@@ -168,3 +169,6 @@ __pycache__
 tags
 *.logs
 *.bak
+.aider*
+!.aiderignore
+.env
@@ -0,0 +1,16 @@
+/**
+ * Marlin-specific settings for Zed
+ *
+ * For a full list of overridable settings, and general information on folder-specific settings,
+ * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
+ */
+{
+  "languages": {
+    "C": {
+      "enable_language_server": false
+    },
+    "C++": {
+      "enable_language_server": false
+    }
+  }
+}
@@ -6,9 +6,10 @@ UNIT_TEST_CONFIG ?= default

 help:
 	@echo "Tasks for local development:"
-	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make marlin                    : Build Marlin for the configured board"
 	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
 	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
+	@echo "make validate-boards -j        : Validate boards.h and pins.h for standards compliance"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
@@ -102,3 +103,11 @@ format-pins: $(PINS)
 validate-pins: format-pins
 	@echo "Validating pins files"
 	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)
+
+BOARDS_FILE := Marlin/src/core/boards.h
+
+.PHONY: validate-boards
+
+validate-boards:
+	@echo "Validating boards.h file"
+	@python $(SCRIPTS_DIR)/validate_boards.py $(BOARDS_FILE) || (echo "\nError: boards.h file is not valid. Please check and correct it.\n" && exit 1)
@@ -187,6 +187,17 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1033)
 # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
 else ifeq ($(HARDWARE_MOTHERBOARD),1034)

+# RAMPS 1.6+ (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1035)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1036)
+# RAMPS 1.6+ (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1037)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1038)
+# RAMPS 1.6+ (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1039)
+
 #
 # RAMPS Derivatives - ATmega1280, ATmega2560
 #
@@ -221,108 +232,113 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# zrib V2.0 (Chinese RAMPS replica)
+# Zonestar zrib V2.0 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# zrib V5.2 (Chinese RAMPS replica)
+# Zonestar zrib V5.2 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# Zonestar zrib V5.3 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
  MCU              ?= atmega1280
  PROG_MCU         ?= m1280
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Raise3D N series Rumba derivative
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
+# Raise3D N series Rumba derivative
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 2 Plus
+# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# MakeBoard Mini v2.1.2 by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.3-based on RAMPS EFB
+# MakeBoard Mini v2.1.2 by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-#   ... Ver 1.4
+# TriGorilla Anycubic version 1.3-based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-#   ... Rev 1.1 (new servo pin order)
+#   ... Ver 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: Ender-4, CR-8
+#   ... Rev 1.1 (new servo pin order)
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# FYSETC F6 1.4
+# Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Wanhao Duplicator i3 Plus
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# VORON Design
+# FYSETC F6 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Tronxy TRONXY-V3-1.0
+# Wanhao Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Z-Bolt X Series
+# VORON Design
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# TT OSCAR
+# Tronxy TRONXY-V3-1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# Overlord/Overlord Pro
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v1
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
+else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
+else ifeq ($(HARDWARE_MOTHERBOARD),1151)
 # MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+else ifeq ($(HARDWARE_MOTHERBOARD),1152)
 # Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+else ifeq ($(HARDWARE_MOTHERBOARD),1153)
 # Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
 # Tenlog D3 Hero IDEX printer
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+# Tenlog D3, D5, D6 IDEX Printer
 else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Tenlog D3,5,6 Pro IDEX printers
-else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1158)
+else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1159)
+else ifeq ($(HARDWARE_MOTHERBOARD),1158)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1160)
+else ifeq ($(HARDWARE_MOTHERBOARD),1159)
 # Longer LK1 PRO / Alfawise U20 Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1161)
+else ifeq ($(HARDWARE_MOTHERBOARD),1160)
 # Longer LKx PRO / Alfawise Uxx Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1162)
-# Zonestar zrib V5.3 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+else ifeq ($(HARDWARE_MOTHERBOARD),1161)
 # Pxmalion Core I3
+else ifeq ($(HARDWARE_MOTHERBOARD),1162)
+# Panowin Cutlass (as found in the Panowin F1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+# Kodama Bardo V1.x (as found in the Kodama Trinus)
 else ifeq ($(HARDWARE_MOTHERBOARD),1164)
+# XTLW MFF V1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1165)
+# XTLW MFF V2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1166)
+

 #
 # RAMBo and derivatives
@@ -340,7 +356,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # abee Scoovo X9H
 else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# Rambo ThinkerV2
+# ThinkerV2
 else ifeq ($(HARDWARE_MOTHERBOARD),1206)

 #
@@ -383,30 +399,40 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1315)
 else ifeq ($(HARDWARE_MOTHERBOARD),1316)
 # Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
 # Geeetech GT2560 Rev B for Mecreator2
+else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+# Geeetech GT2560 Rev B for A20(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Geeetech GT2560 Rev B for A20(M/T/D)
+# Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1320)
-# Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1321)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1322)
-# Leapfrog Xeed 2015
-else ifeq ($(HARDWARE_MOTHERBOARD),1323)
-# PICA Shield (original version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1324)
-# PICA Shield (rev C or later)
-else ifeq ($(HARDWARE_MOTHERBOARD),1325)
-# Intamsys 4.0 (Funmat HT)
-else ifeq ($(HARDWARE_MOTHERBOARD),1326)
-# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
-else ifeq ($(HARDWARE_MOTHERBOARD),1327)
 # Geeetech GT2560 Rev B for A20(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1321)
+# Einstart retrofit
+else ifeq ($(HARDWARE_MOTHERBOARD),1322)
+# Wanhao 0ne+ i3 Mini
+else ifeq ($(HARDWARE_MOTHERBOARD),1323)
+# Overlord/Overlord Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1324)
+# ADIMLab Gantry v1
+else ifeq ($(HARDWARE_MOTHERBOARD),1325)
+# ADIMLab Gantry v2
+else ifeq ($(HARDWARE_MOTHERBOARD),1326)
+# Leapfrog Xeed 2015
+else ifeq ($(HARDWARE_MOTHERBOARD),1327)
+# PICA Shield (original version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1328)
-# Mega controller & Protoneer CNC Shield V3.00
+# PICA Shield (rev C or later)
 else ifeq ($(HARDWARE_MOTHERBOARD),1329)
+# Intamsys 4.0 (Funmat HT)
+else ifeq ($(HARDWARE_MOTHERBOARD),1330)
+# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
+else ifeq ($(HARDWARE_MOTHERBOARD),1331)
+# Mega controller & Protoneer CNC Shield V3.00
+else ifeq ($(HARDWARE_MOTHERBOARD),1332)
+# WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
+else ifeq ($(HARDWARE_MOTHERBOARD),1333)
+# Geeetech GT2560 V4.1B for A10(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1334)

 #
 # ATmega1281, ATmega2561
@@ -440,7 +466,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1502)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
  PROG_MCU         ?= m644p
-# Melzi V2.0
+# Melzi V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
@@ -450,36 +476,41 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1504)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Creality3D board (for CR-10 etc)
+# Melzi Creality3D (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Malyan M150 board
+# Melzi Creality3D (for Ender-2)
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Tronxy X5S
+# Melzi Malyan M150
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# STB V1.1
+# Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Azteeg X1
+# STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Anet 1.0 (Melzi clone)
+# Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1510)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),1511)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # ZoneStar ZMIB V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1511)
  HARDWARE_VARIANT ?= Sanguino
@@ -995,7 +1026,7 @@ extcoff: $(TARGET).elf
 	$(NM) -n $< > $@

 # Link: create ELF output file from library.
-
+LDFLAGS+= -Wl,-V
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
 	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
@@ -41,7 +41,14 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-05-24"
+//#define STRING_DISTRIBUTION_DATE "2025-03-18"
+
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"

 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
 */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000
@@ -62,6 +62,11 @@ motherboard                              = BOARD_RAMPS_14_EFB
 serial_port                              = 0
 baudrate                                 = 250000

+string_config_h_author                   = "(default from config.ini)"
+
+capabilities_report                      = on
+extended_capabilities_report             = on
+
 use_watchdog                             = on
 thermal_protection_hotends               = on
 thermal_protection_hysteresis            = 4
@@ -77,9 +82,7 @@ temp_sensor_0                            = 1
 temp_hysteresis                          = 3
 heater_0_mintemp                         = 5
 heater_0_maxtemp                         = 275
-preheat_1_temp_hotend                    = 180

-bang_max                                 = 255
 pidtemp                                  = on
 pid_k1                                   = 0.95
 pid_max                                  = 255
@@ -89,6 +92,14 @@ default_kp                               = 22.20
 default_ki                               = 1.08
 default_kd                               = 114.00

+temp_sensor_bed                          = 1
+bed_mintemp                              = 5
+bed_maxtemp                              = 150
+
+thermal_protection_bed                   = on
+thermal_protection_bed_hysteresis        = 2
+thermal_protection_bed_period            = 20
+
 x_driver_type                            = A4988
 y_driver_type                            = A4988
 z_driver_type                            = A4988
@@ -121,10 +132,10 @@ default_max_acceleration                 = { 3000, 3000, 100, 10000 }
 homing_feedrate_mm_m                     = { (50*60), (50*60), (4*60) }
 homing_bump_divisor                      = { 2, 2, 4 }

-x_enable_on                              = 0
-y_enable_on                              = 0
-z_enable_on                              = 0
-e_enable_on                              = 0
+x_enable_on                              = LOW
+y_enable_on                              = LOW
+z_enable_on                              = LOW
+e_enable_on                              = LOW

 invert_x_dir                             = false
 invert_y_dir                             = true
@@ -136,11 +147,6 @@ step_state_x                             = HIGH
 step_state_y                             = HIGH
 step_state_z                             = HIGH

-disable_x                                = off
-disable_y                                = off
-disable_z                                = off
-disable_e                                = off
-
 proportional_font_ratio                  = 1.0
 default_nominal_filament_dia             = 1.75

@@ -153,18 +159,13 @@ default_retract_acceleration             = 3000
 default_minimumfeedrate                  = 0.0
 default_mintravelfeedrate                = 0.0

-minimum_planner_speed                    = 0.05
 min_steps_per_segment                    = 6
 default_minsegmenttime                   = 20000

 [config:basic]
 bed_overshoot                            = 10
 busy_while_heating                       = on
-default_ejerk                            = 5.0
 default_keepalive_interval               = 2
-default_leveling_fade_height             = 0.0
-disable_other_extruders                  = on
-display_charset_hd44780                  = JAPANESE
 eeprom_boot_silent                       = on
 eeprom_chitchat                          = on
 endstoppullups                           = on
@@ -173,10 +174,8 @@ extrude_mintemp                          = 170
 host_keepalive_feature                   = on
 hotend_overshoot                         = 15
 jd_handle_small_segments                 = on
-lcd_info_screen_style                    = 0
-lcd_language                             = en
 max_bed_power                            = 255
-mesh_inset                               = 0
+
 min_software_endstops                    = on
 max_software_endstops                    = on
 min_software_endstop_x                   = on
@@ -185,50 +184,48 @@ min_software_endstop_z                   = on
 max_software_endstop_x                   = on
 max_software_endstop_y                   = on
 max_software_endstop_z                   = on
-preheat_1_fan_speed                      = 0
+
 preheat_1_label                          = "PLA"
+preheat_1_temp_hotend                    = 180
 preheat_1_temp_bed                       = 70
+preheat_1_fan_speed                      = 0
+
+preheat_2_label                          = "ABS"
+preheat_2_temp_hotend                    = 240
+preheat_2_temp_bed                       = 110
+preheat_2_fan_speed                      = 0
+
 prevent_cold_extrusion                   = on
 prevent_lengthy_extrude                  = on
 printjob_timer_autostart                 = on
-probing_margin                           = 10
-show_bootscreen                          = on
-soft_pwm_scale                           = 0
-string_config_h_author                   = "(none, default config)"
+
 temp_bed_hysteresis                      = 3
 temp_bed_residency_time                  = 10
 temp_bed_window                          = 1
 temp_residency_time                      = 10
 temp_window                              = 1
 validate_homing_endstops                 = on
-xy_probe_feedrate                        = (133*60)
-z_clearance_between_probes               = 5
-z_clearance_deploy_probe                 = 10
-z_clearance_multi_probe                  = 5
+
+editable_steps_per_unit                  = on

 [config:advanced]
 arc_support                              = on
 auto_report_temperatures                 = on
+
 autotemp                                 = on
+autotemp_min                             = 210
+autotemp_max                             = 250
+autotemp_factor                          = 0.1f
 autotemp_oldweight                       = 0.98
-bed_check_interval                       = 5000
+
 default_stepper_timeout_sec              = 120
-default_volumetric_extruder_limit        = 0.00
 disable_idle_x                           = on
 disable_idle_y                           = on
 disable_idle_z                           = on
 disable_idle_e                           = on
 e0_auto_fan_pin                          = -1
-encoder_100x_steps_per_sec               = 80
-encoder_10x_steps_per_sec                = 30
-encoder_rate_multiplier                  = on
-extended_capabilities_report             = on
-extruder_auto_fan_speed                  = 255
-extruder_auto_fan_temperature            = 50
-fanmux0_pin                              = -1
-fanmux1_pin                              = -1
-fanmux2_pin                              = -1
 faster_gcode_parser                      = on
+debug_flags_gcode                        = on
 homing_bump_mm                           = { 5, 5, 2 }
 max_arc_segment_mm                       = 1.0
 min_arc_segment_mm                       = 0.1
@@ -237,11 +234,11 @@ n_arc_correction                         = 25
 serial_overrun_protection                = on
 slowdown                                 = on
 slowdown_divisor                         = 2
-temp_sensor_bed                          = 0
-thermal_protection_bed_hysteresis        = 2
-thermocouple_max_errors                  = 15
 tx_buffer_size                           = 0
+
+bed_check_interval                       = 5000
 watch_bed_temp_increase                  = 2
 watch_bed_temp_period                    = 60
+
 watch_temp_increase                      = 2
-watch_temp_period                        = 20
+watch_temp_period                        = 40
@@ -129,11 +129,11 @@ typedef Servo hal_servo_t;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if !WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #error "MMU2_SERIAL_PORT must be from 0 to 3"
+#ifdef MMU_SERIAL_PORT
+  #if !WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #error "MMU_SERIAL_PORT must be from 0 to 3"
  #endif
-  #define MMU2_SERIAL mmuSerial
+  #define MMU_SERIAL mmuSerial
 #endif

 #ifdef LCD_SERIAL_PORT
@@ -141,7 +141,7 @@ typedef Servo hal_servo_t;
    #error "LCD_SERIAL_PORT must be from 0 to 3."
  #endif
  #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
  #endif
 #endif
@@ -159,7 +159,7 @@ typedef Servo hal_servo_t;
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

-#define HAL_SENSITIVE_PINS 0, 1,
+#define HAL_SENSITIVE_PINS 0, 1

 #ifdef __AVR_AT90USB1286__
  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
@@ -601,20 +601,20 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);

 #endif // SERIAL_PORT_3

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _RX_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::store_rxd_char();
  }

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _UDRE_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::_tx_udr_empty_irq();
  }

-  template class MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> >;
+  template class MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> >;
  MSerialMMU2 mmuSerial(MSerialMMU2::HasEmergencyParser);

-#endif // MMU2_SERIAL_PORT
+#endif // MMU_SERIAL_PORT

 #ifdef LCD_SERIAL_PORT

@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
  template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
  MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);

-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    template<typename Cfg>
    typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
      const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
@@ -205,7 +205,7 @@
    static ring_buffer_pos_t available();
    static void write(const uint8_t c);
    static void flushTX();
-    #if HAS_DGUS_LCD
+    #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
      static ring_buffer_pos_t get_tx_buffer_free();
    #endif

@@ -246,7 +246,7 @@

 #endif // !USBCON

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT
  template <uint8_t serial>
  struct MMU2SerialCfg {
    static constexpr int PORT               = serial;
@@ -260,7 +260,7 @@
    static constexpr bool RX_OVERRUNS       = false;
  };

-  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> > > MSerialMMU2;
  extern MSerialMMU2 mmuSerial;
 #endif

@@ -345,6 +345,14 @@ void setup_endstop_interrupts() {
      pciSetup(Z_MIN_PROBE_PIN);
    #endif
  #endif
+  #if USE_CALIBRATION
+    #if (digitalPinToInterrupt(CALIBRATION_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(CALIBRATION_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(CALIBRATION_PIN), "CALIBRATION_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      pciSetup(CALIBRATION_PIN);
+    #endif
+  #endif

  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }
@@ -150,7 +150,7 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
      else {
        if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
        const uint16_t rft = (F_CPU) / (p * f_desired);
-        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=" STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
+        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
        res_fast_temp = rft - 1;
        res_pc_temp = rft / 2;
      }
@@ -28,9 +28,6 @@
 *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
 *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
 *   Analog Input  :                                                                                                                                                                    0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
 *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
 *   Port:        B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 /**                        ATMega644
@@ -26,10 +26,7 @@
 *
 *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
- *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
+ *            Logical pins 46-47 aren't supported by Teensyduino, but are supported below as E2 and E3
 */

 #include "../fastio.h"
@@ -22,7 +22,23 @@
 #pragma once

 /**
- * PWM print routines for Atmel 8 bit AVR CPUs
+ * Pins Debugging for Atmel 8 bit AVR CPUs
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #include "../../inc/MarlinConfig.h"
@@ -39,44 +55,44 @@
  #include "pinsDebug_Teensyduino.h"
  // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
  // portModeRegister takes a different argument
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
+  #define getValidPinMode(P) (*portModeRegister(P) & digitalPinToBitMask_DEBUG(P))

 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70

  #include "pinsDebug_plus_70.h"
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer_plus_70(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask_plus_70(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort_plus_70(P)
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }

 #else

-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)

 #endif

-#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define isValidPin(P) (P >= 0 && P < NUMBER_PINS_TOTAL)
 #if AVR_ATmega1284_FAMILY
-  #define IS_ANALOG(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(IS_ANALOG(P) ? (P) - analogInputToDigitalPin(7) : -1)
+  #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
+  #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
 #else
  #define _ANALOG1(P) WITHIN(P, analogInputToDigitalPin(0), analogInputToDigitalPin(7))
  #define _ANALOG2(P) WITHIN(P, analogInputToDigitalPin(8), analogInputToDigitalPin(15))
-  #define IS_ANALOG(P) (_ANALOG1(P) || _ANALOG2(P))
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
+  #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
+  #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+#define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin

-void PRINT_ARRAY_NAME(uint8_t x) {
-  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
+void printPinNameByIndex(const uint8_t index) {
+  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[index].name);
  for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
    char temp_char = pgm_read_byte(name_mem_pointer + y);
    if (temp_char != 0)
@@ -88,7 +104,7 @@ void PRINT_ARRAY_NAME(uint8_t x) {
  }
 }

-#define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
+#define getPinIsDigitalByIndex(x)   pgm_read_byte(&pin_array[x].is_digital)

 #if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
  #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
@@ -109,7 +125,7 @@ void PRINT_ARRAY_NAME(uint8_t x) {
 * Print a pin's PWM status.
 * Return true if it's currently a PWM pin.
 */
-bool pwm_status(uint8_t pin) {
+bool pwm_status(const uint8_t pin) {
  char buffer[20];   // for the sprintf statements

  switch (digitalPinToTimer_DEBUG(pin)) {
@@ -276,7 +292,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
  if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }

-void pwm_details(uint8_t pin) {
+void printPinPWM(const uint8_t pin) {
  switch (digitalPinToTimer_DEBUG(pin)) {

    #if ABTEST(0)
@@ -347,7 +363,7 @@ void pwm_details(uint8_t pin) {
  #else
    UNUSED(print_is_also_tied);
  #endif
-} // pwm_details
+} // printPinPWM

 #ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
  int digitalRead_mod(const pin_t pin) {  // same as digitalRead except the PWM stop section has been removed
@@ -356,7 +372,7 @@ void pwm_details(uint8_t pin) {
  }
 #endif

-void print_port(const pin_t pin) {   // print port number
+void printPinPort(const pin_t pin) {   // print port number
  #ifdef digitalPinToPort_DEBUG
    uint8_t x;
    SERIAL_ECHOPGM("  Port: ");
@@ -386,7 +402,7 @@ void print_port(const pin_t pin) {   // print port number
  #endif
 }

-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)

 #undef ABTEST
@@ -102,7 +102,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {

 // digitalPinToBitMask(pin) is OK

-#define digitalRead_mod(p)  extDigitalRead(p)   // Teensyduino's version of digitalRead doesn't
+#define digitalRead_mod(P)  extDigitalRead(P)   // Teensyduino's version of digitalRead doesn't
                                                // disable the PWMs so we can use it as is

 // portModeRegister(pin) is OK
@@ -23,43 +23,41 @@

 /**
 * Define SPI Pins: SCK, MISO, MOSI, SS
+ * Platform pins have parentheses, e.g., "(53)", so we cannot use them.
 */
 #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_SCK_PIN  13
-  #define AVR_MISO_PIN 12
-  #define AVR_MOSI_PIN 11
-  #define AVR_SS_PIN   10
+  #define _PIN_SPI_SCK  13
+  #define _PIN_SPI_MISO 12
+  #define _PIN_SPI_MOSI 11
+  #define _PIN_SPI_SS   10
 #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define AVR_SCK_PIN  7
-  #define AVR_MISO_PIN 6
-  #define AVR_MOSI_PIN 5
-  #define AVR_SS_PIN   4
+  #define _PIN_SPI_SCK  7
+  #define _PIN_SPI_MISO 6
+  #define _PIN_SPI_MOSI 5
+  #define _PIN_SPI_SS   4
 #elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define AVR_SCK_PIN  52
-  #define AVR_MISO_PIN 50
-  #define AVR_MOSI_PIN 51
-  #define AVR_SS_PIN   53
+  #define _PIN_SPI_SCK  52
+  #define _PIN_SPI_MISO 50
+  #define _PIN_SPI_MOSI 51
+  #define _PIN_SPI_SS   53
 #elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
-  #define AVR_SCK_PIN  21
-  #define AVR_MISO_PIN 23
-  #define AVR_MOSI_PIN 22
-  #define AVR_SS_PIN   20
+  #define _PIN_SPI_SCK  21
+  #define _PIN_SPI_MISO 23
+  #define _PIN_SPI_MOSI 22
+  #define _PIN_SPI_SS   20
 #elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_SCK_PIN  10
-  #define AVR_MISO_PIN 12
-  #define AVR_MOSI_PIN 11
-  #define AVR_SS_PIN   16
+  #define _PIN_SPI_SCK  10
+  #define _PIN_SPI_MISO 12
+  #define _PIN_SPI_MOSI 11
+  #define _PIN_SPI_SS   16
 #endif

 #ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  AVR_SCK_PIN
+  #define SD_SCK_PIN  _PIN_SPI_SCK
 #endif
 #ifndef SD_MISO_PIN
-  #define SD_MISO_PIN AVR_MISO_PIN
+  #define SD_MISO_PIN _PIN_SPI_MISO
 #endif
 #ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN AVR_MOSI_PIN
-#endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN   AVR_SS_PIN
+  #define SD_MOSI_PIN _PIN_SPI_MOSI
 #endif
@@ -120,7 +120,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  U8G_ATOMIC_END();
 }

-#if ENABLED(FYSETC_MINI_12864)
+#if U8G_SPI_USE_MODE_3
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_0
@@ -143,9 +143,9 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                         //   SCK idle state needs to be set to the proper idle state before
-                                               //   the next chip select goes active
+      #if U8G_SPI_USE_MODE_3                                  // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                                        // SCK idle state needs to be set to the proper idle state before
+                                                              //  the next chip select goes active
          u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1);  // Set SCK to mode 3 idle state before CS goes active
          u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
        }
@@ -48,7 +48,7 @@ uint16_t MarlinHAL::adc_result;

 void MarlinHAL::init() {
  #if HAS_MEDIA
-    OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
+    OUT_WRITE(SD_SS_PIN, HIGH);  // Try to set SDSS inactive before any other SPI users start up
  #endif
  usb_task_init();          // Initialize the USB stack
  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
@@ -35,67 +35,9 @@

 #include <stdint.h>

-#include "../../core/serial_hook.h"
-
-// ------------------------
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
-typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
-typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
-extern DefaultSerial1 MSerial0;
-extern DefaultSerial2 MSerial1;
-extern DefaultSerial3 MSerial2;
-extern DefaultSerial4 MSerial3;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL1 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL2 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL3 customizedSerial3
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
+//
+// Serial Ports
+//

 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
@@ -127,7 +69,7 @@ typedef Servo hal_servo_t;
 #define HAL_ADC_RESOLUTION  10

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif

 //
@@ -600,9 +600,8 @@
      OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
      OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
      OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
-      WRITE(SD_SS_PIN, HIGH);
-
-      OUT_WRITE(SDSS, LOW);
+      OUT_WRITE(SD_SS_PIN, HIGH);
+      WRITE(SD_SS_PIN, LOW);

      PIO_Configure(
        g_APinDescription[SPI_PIN].pPort,
@@ -767,7 +766,7 @@

      // Disable PIO on A26 and A27
      REG_PIOA_PDR = 0x0C000000;
-      OUT_WRITE(SDSS, HIGH);
+      OUT_WRITE(SD_SS_PIN, HIGH);

      // Reset SPI0 (from sam lib)
      SPI0->SPI_CR = SPI_CR_SPIDIS;
@@ -33,6 +33,21 @@
 #include "../../core/types.h"
 #include "../../core/serial_hook.h"

+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#define EP_SERIAL_PORT(N) customizedSerial##N
+#define USB_SERIAL_PORT(N) customizedSerial##N
+#include "../shared/serial_ports.h"
+
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
 // location to which to write the next incoming character and rx_buffer_tail
@@ -50,7 +50,7 @@
 static Flags<_Nbr_16timers> DisablePending; // ISR should disable the timer at the next timer reset

 // ------------------------
-/// Interrupt handler for the TC0 channel 1.
+// Interrupt handler for the TC0 channel 1.
 // ------------------------
 void Servo_Handler(const timer16_Sequence_t, Tc*, const uint8_t);

@@ -291,7 +291,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
      uint32_t *p1 = (uint32_t*)addrflash;
      uint32_t *p2 = (uint32_t*)data;
      int count = 0;
-      for (i =0; i<PageSize >> 2; i++) {
+      for (i = 0; i < PageSize >> 2; i++) {
        if (p1[i] != p2[i]) {
          uint32_t delta = p1[i] ^ p2[i];
          while (delta) {
@@ -64,6 +64,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -68,16 +68,15 @@
 * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
 * as the TMC2130 soft SPI the most common setup.
 */
-#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
-
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
-  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
-      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
-    #endif
-  #elif ENABLED(SOFTWARE_SPI)
+  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+  #if DISABLED(SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
+  #endif
+  #if ENABLED(SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
    #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
  #endif
+  #undef _IS_HW_SPI
 #endif

 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
@@ -19,13 +19,26 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for Due
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for DUE
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #include "../shared/Marduino.h"
@@ -63,20 +76,20 @@

 #define NUMBER_PINS_TOTAL PINS_COUNT

-#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
-#define VALID_PIN(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
-#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
-#define IS_ANALOG(P) WITHIN(P, char(analogInputToDigitalPin(0)), char(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-#define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
-                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
+#define digitalRead_mod(P) extDigitalRead(P)  // AVR digitalRead disabled PWM before it read the pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+#define pwm_status(P) (((g_pinStatus[P] & 0xF) == PIN_STATUS_PWM) && \
+                        ((g_APinDescription[P].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin

-bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
  volatile Pio* port = g_APinDescription[pin].pPort;
  uint32_t mask = g_APinDescription[pin].ulPin;
  uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -85,14 +98,14 @@ bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
          || pwm_status(pin));
 }

-void pwm_details(int32_t pin) {
+void printPinPWM(const int32_t pin) {
  if (pwm_status(pin)) {
    uint32_t chan = g_APinDescription[pin].ulPWMChannel;
    SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
  }
 }

-void print_port(const pin_t) {}
+void printPinPort(const pin_t) {}

 /**
 * DUE Board pin   |  PORT  | Label
@@ -24,41 +24,38 @@
 /**
 * Define SPI Pins: SCK, MISO, MOSI, SS
 *
- * Available chip select pins for HW SPI are 4 10 52 77
+ * Available chip select pins for HW SPI are 4 10 52 77 87
 */
-#if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
-  #if SDSS == 4
-    #define SPI_PIN         87
-    #define SPI_CHAN         1
-  #elif SDSS == 10
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #elif SDSS == 52
-    #define SPI_PIN         86
-    #define SPI_CHAN         2
-  #elif SDSS == 77
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #else
-    #define SPI_PIN         87
-    #define SPI_CHAN         1
-  #endif
-  #define SD_SCK_PIN        76
-  #define SD_MISO_PIN       74
-  #define SD_MOSI_PIN       75
-#else
-  // defaults
-  #define SOFTWARE_SPI
-  #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN      52
-  #endif
-  #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN     50
-  #endif
-  #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN     51
-  #endif
+#if SD_SS_PIN == 4 || SD_SS_PIN == 10 || SD_SS_PIN == 52 || SD_SS_PIN == 77 || SD_SS_PIN == 87
+  #define SD_SCK_PIN      76
+  #define SD_MISO_PIN     74
+  #define SD_MOSI_PIN     75
 #endif

-/* A.28, A.29, B.21, C.26, C.29 */
-#define SD_SS_PIN         SDSS
+#if SD_SS_PIN == 4
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#elif SD_SS_PIN == 10
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 52
+  #define SPI_PIN         86
+  #define SPI_CHAN         2
+#elif SD_SS_PIN == 77
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 87
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#else
+  #define SOFTWARE_SPI
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN    52
+  #endif
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN   50
+  #endif
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN   51
+  #endif
+#endif
@@ -66,7 +66,7 @@

 #include <U8glib-HAL.h>

-#if ENABLED(FYSETC_MINI_12864)
+#if U8G_SPI_USE_MODE_3
  #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
 #else
  #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_0
@@ -96,15 +96,15 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                        //   SCK idle state needs to be set to the proper idle state before
-                                               //   the next chip select goes active
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);  //set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3                        // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                              // SCK idle state needs to be set to the proper idle state before
+                                                    //  the next chip select goes active
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
          u8g_SetPILevel_DUE(u8g, U8G_PI_CS, LOW);
        }
        else {
          u8g_SetPILevel_DUE(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0); //set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        u8g_SetPILevel_DUE(u8g, U8G_PI_CS, !arg_val);
@@ -11,7 +11,7 @@ if pioutil.is_pio_build():

    if current_OS == 'Windows':

-        Import("env")
+        env = pioutil.env

        # Use bossac.exe on Windows
        env.Replace(
@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init() {
 }

 inline bool media_ready() {
-  return IS_SD_INSERTED() && !IS_SD_PRINTING() && !IS_SD_FILE_OPEN() && card.isMounted();
+  return IS_SD_MOUNTED() && IS_SD_INSERTED() && !IS_SD_FILE_OPEN() && !IS_SD_PRINTING();
 }

 bool sd_mmc_spi_unload(bool) { return true; }
@@ -32,14 +32,14 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
  return CTRL_GOOD;
 }

 // NOTE: This function is defined as returning the address of the last block
 // in the card, which is cardSize() - 1
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
  *nb_sector = card.diskIODriver()->cardSize() - 1;
  return CTRL_GOOD;
 }
@@ -61,7 +61,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -100,7 +100,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -209,16 +209,17 @@ int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 // ADC
 // ------------------------

-#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
-
+// https://docs.espressif.com/projects/esp-idf/en/release-v4.4/esp32/api-reference/peripherals/adc.html
 adc1_channel_t get_channel(int pin) {
  switch (pin) {
-    case 39: return ADC1_CHANNEL(39);
-    case 36: return ADC1_CHANNEL(36);
-    case 35: return ADC1_CHANNEL(35);
-    case 34: return ADC1_CHANNEL(34);
-    case 33: return ADC1_CHANNEL(33);
-    case 32: return ADC1_CHANNEL(32);
+    case 39: return ADC1_CHANNEL_3;
+    case 36: return ADC1_CHANNEL_0;
+    case 35: return ADC1_CHANNEL_7;
+    case 34: return ADC1_CHANNEL_6;
+    case 33: return ADC1_CHANNEL_5;
+    case 32: return ADC1_CHANNEL_4;
+    case 37: return ADC1_CHANNEL_1;
+    case 38: return ADC1_CHANNEL_2;
  }
  return ADC1_CHANNEL_MAX;
 }
@@ -59,6 +59,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -37,6 +37,10 @@
 // Set pin as output
 #define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)

+// TODO: Store set modes in an array and use those to get the mode
+#define _IS_OUTPUT(IO)           true
+#define _IS_INPUT(IO)            true
+
 // Set pin as input with pullup mode
 #define _PULLUP(IO, v)          pinMode(IO, v ? INPUT_PULLUP : INPUT)

@@ -70,6 +74,9 @@
 // Set pin as output and init
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)

+#define IS_OUTPUT(IO)            _IS_OUTPUT(IO)
+#define IS_INPUT(IO)             _IS_INPUT(IO)
+
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)      digitalRead(IO)
 #define extDigitalWrite(IO,V)   digitalWrite(IO,V)
@@ -152,7 +152,7 @@ void stepperTask(void *parameter) {
    xQueueReceive(dma.queue, &dma.current, portMAX_DELAY);
    dma.rw_pos = 0;

-    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.mode);
+    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.active);

    while (dma.rw_pos < DMA_SAMPLE_COUNT) {

@@ -22,11 +22,15 @@

 #ifdef ARDUINO_ARCH_ESP32

+#include <WiFi.h>
+
+#undef ENABLED
+#undef DISABLED
+
 #include "../../inc/MarlinConfigPre.h"

 #if ALL(WIFISUPPORT, OTASUPPORT)

-#include <WiFi.h>
 #include <ESPmDNS.h>
 #include <WiFiUdp.h>
 #include <ArduinoOTA.h>
@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#error "PINS_DEBUGGING is not yet supported for ESP32!"
+
+/**
+ * Pins Debugging for ESP32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+
+#define digitalRead_mod(P) extDigitalRead(P)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+bool pwm_status(const pin_t) { return false; }
+
+void printPinPort(const pin_t) {}
+
+static bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
+}
+
+void printPinPWM(const int32_t pin) {
+  if (pwm_status(pin)) {
+    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
+    //SERIAL_ECHOPGM("PWM = ", duty);
+  }
+}
@@ -21,7 +21,16 @@
 */
 #pragma once

-#define SD_SS_PIN   SDSS
-#define SD_SCK_PIN  18
-#define SD_MISO_PIN 19
-#define SD_MOSI_PIN 23
+#define PIN_SPI_SCK  18
+#define PIN_SPI_MISO 19
+#define PIN_SPI_MOSI 23
+
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  PIN_SPI_SCK
+#endif
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN PIN_SPI_MISO
+#endif
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN PIN_SPI_MOSI
+#endif
@@ -90,7 +90,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
  config.counter_en  = TIMER_PAUSE;
  config.alarm_en    = TIMER_ALARM_EN;
  config.intr_type   = TIMER_INTR_LEVEL;
-  config.auto_reload = true;
+  config.auto_reload = TIMER_AUTORELOAD_EN;

  // Select and initialize the timer
  timer_init(timer.group, timer.idx, &config);
@@ -53,12 +53,11 @@ typedef uint64_t hal_timer_t;
 #if ENABLED(I2S_STEPPER_STREAM)
  #define STEPPER_TIMER_PRESCALE     1
  #define STEPPER_TIMER_RATE         250000                           // 250khz, 4µs pulses of i2s word clock
-  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
 #else
  #define STEPPER_TIMER_PRESCALE     40
  #define STEPPER_TIMER_RATE         ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
-  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)              // stepper timer ticks per µs
 #endif
+#define STEPPER_TIMER_TICKS_PER_US   ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs

 #define STEP_TIMER_MIN_INTERVAL   8 // minimum time in µs between stepper interrupts

@@ -21,11 +21,12 @@
 */
 #ifdef ARDUINO_ARCH_ESP32

-#include "../../core/serial.h"
 #include "../../inc/MarlinConfigPre.h"

 #if ENABLED(WIFISUPPORT)

+#include "../../core/serial.h"
+
 #include <WiFi.h>
 #include <ESPmDNS.h>
 #include <ESPAsyncWebServer.h>
@@ -30,69 +30,18 @@

 #include "../../inc/MarlinConfig.h"

-#include "../../core/macros.h"
 #include "../shared/Marduino.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"

 #include "fastio.h"
 #include "timers.h"
-#include "MarlinSerial.h"
-
-#include <stdint.h>

 //
 // Serial Ports
 //
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-#define NUM_UARTS 4

-#if SERIAL_PORT == -1
-  #error "USB Serial is not supported on HC32F460"
-#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #define MYSERIAL1 MSERIAL(1) // Dummy port
-  static_assert(false, "SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #define MYSERIAL2 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_2 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_3, 1, NUM_UARTS)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #define MYSERIAL3 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_3 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #define LCD_SERIAL MSERIAL(1) // Dummy port
-    static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-
-  #if HAS_DGUS_LCD
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
-  #endif
-#endif
+#include "MarlinSerial.h"

 //
 // Emergency Parser
@@ -114,22 +63,19 @@
 // Misc. Functions
 //
 #ifndef analogInputToDigitalPin
-#define analogInputToDigitalPin(p) (p)
+  #define analogInputToDigitalPin(p) pin_t(p)
 #endif

-#define CRITICAL_SECTION_START        \
-  uint32_t primask = __get_PRIMASK(); \
-  (void)__iCliRetVal()
+#define CRITICAL_SECTION_START()        \
+  const bool irqon = !__get_PRIMASK();  \
+  __disable_irq();                      \
+  __DSB();
+#define CRITICAL_SECTION_END()          \
+  __DSB();                              \
+  if (irqon) __enable_irq();

-#define CRITICAL_SECTION_END \
-  if (!primask)              \
-  (void)__iSeiRetVal()
-
-// Disable interrupts
-#define cli() noInterrupts()
-
-// Enable interrupts
-#define sei() interrupts()
+#define cli() __disable_irq()
+#define sei() __enable_irq()

 // bss_end alias
 #define __bss_end __bss_end__
@@ -24,6 +24,14 @@
 #include "../../core/serial_hook.h"
 #include <drivers/usart/Usart.h>

+#define SERIAL_INDEX_MIN 1
+#define SERIAL_INDEX_MAX 4
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
+#endif
+
 // Optionally set uart IRQ priority to reduce overflow errors
 //#define UART_RX_IRQ_PRIO 1
 //#define UART_TX_IRQ_PRIO 1
@@ -11,7 +11,7 @@ The HC32F460 HAL is designed to be generic enough for any HC32F460-based board.
   - Examine the board's main processor. (Refer the naming key in `hc32.ini`.)
   - Extend the `HC32F460C_common` base env for 256K, or `HC32F460E_common` for 512K.
 3. Determine your board's application start address (see [below](#finding-the-application-start-address))
-4. Set `board_build.ld_args.flash_start` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.
+4. Set `board_upload.offset_address` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.

 ### Finding the application start address

@@ -8,6 +8,7 @@
 #define _HC32_APP_CONFIG_H_

 #include "../../inc/MarlinConfigPre.h"
+#include "sysclock.h"

 //
 // dev mode
@@ -64,12 +65,8 @@
 // redirect printf to host serial
 #define REDIRECT_PRINTF_TO_SERIAL 1

-// F_CPU must be known at compile time, but on HC32F460 it's not.
-// Thus we assume HCLK to be 200MHz, as that's what is configured in
-// 'core_hook_sysclock_init' in 'sysclock.cpp'.
-// If you face issues with this assumption, please double-check with the values
-// printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
-// see also: HAL_TIMER_RATE in timers.h
-#define F_CPU 200000000 // 200MHz HCLK
+// F_CPU is F_HCLK, as that's the main CPU core's clock.
+// see 'sysclock.h' for more information.
+#define F_CPU F_HCLK

 #endif // _HC32_APP_CONFIG_H_
@@ -101,12 +101,14 @@ void setup_endstop_interrupts() {

  SETUP(Z_MIN_PROBE);

+  SETUP(CALIBRATION);
+
  #undef SETUP
 }

 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE, USE_CALIBRATION)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
  #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0
@@ -94,8 +94,10 @@
    #error "SERIAL_DMA requires USART_RX_DMA_SUPPORT to be enabled in the arduino core."
  #endif

-  // USART_RX_DMA_SUPPORT does not implement core_hook_usart_rx_irq, which is required for the emergency parser
-  #if ENABLED(EMERGENCY_PARSER)
+  // Before arduino core version 1.2.0, USART_RX_DMA_SUPPORT did not implement
+  // core_hook_usart_rx_irq, which is required for the emergency parser.
+  // With 1.2.0, this was fixed (see https://github.com/shadow578/framework-arduino-hc32f46x/pull/25).
+  #if ENABLED(EMERGENCY_PARSER) && ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 2, 0)
    #error "EMERGENCY_PARSER is not supported with SERIAL_DMA. Please disable either SERIAL_DMA or EMERGENCY_PARSER."
  #endif

@@ -18,41 +18,47 @@
 */
 #pragma once

+/**
+ * Pins Debugging for HC32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
 #include "../../inc/MarlinConfig.h"
 #include "fastio.h"
 #include <drivers/timera/timera_pwm.h>

-//
-// Translation of routines & variables used by pinsDebug.h
-//
 #ifndef BOARD_NR_GPIO_PINS
  #error "Expected BOARD_NR_GPIO_PINS not found."
 #endif

 #define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
 #define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define VALID_PIN(pin) IS_GPIO_PIN(pin)
+#define isValidPin(P) IS_GPIO_PIN(P)

 // Note: pin_array is defined in `Marlin/src/pins/pinsDebug.h`, and since this file is included
 // after it, it is available in this file as well.
-#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PIN(p)                              \
-  do {                                            \
-    sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); \
-    SERIAL_ECHO(buffer);                          \
-  } while (0)
-#define PRINT_PIN_ANALOG(p)                                               \
-  do {                                                                    \
-    sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); \
-    SERIAL_ECHO(buffer);                                                  \
-  } while (0)
-#define PRINT_PORT(p) print_port(p)
-#define PRINT_ARRAY_NAME(x)                                                          \
-  do {                                                                               \
-    sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); \
-    SERIAL_ECHO(buffer);                                                             \
-  } while (0)
+#define getPinByIndex(x) pin_t(pin_array[x].pin)
+#define digitalRead_mod(P) extDigitalRead(P)
+
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(P)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)

 #define MULTI_NAME_PAD 21 // Space needed to be pretty if not first name assigned to a pin

@@ -71,14 +77,14 @@
  #define M43_NEVER_TOUCH(Q) (IS_HOST_USART_PIN(Q) || IS_OSC_PIN(Q))
 #endif

-static pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) {
-  if (!VALID_PIN(pin)) return -1;
+int8_t digitalPinToAnalogIndex(const pin_t pin) {
+  if (!isValidPin(pin)) return -1;
  const int8_t adc_channel = int8_t(PIN_MAP[pin].adc_info.channel);
  return pin_t(adc_channel);
 }

-static bool IS_ANALOG(pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
+bool isAnalogPin(pin_t pin) {
+  if (!isValidPin(pin)) return false;

  if (PIN_MAP[pin].adc_info.channel != ADC_PIN_INVALID)
    return _GET_MODE(pin) == INPUT_ANALOG && !M43_NEVER_TOUCH(pin);
@@ -86,13 +92,13 @@ static bool IS_ANALOG(pin_t pin) {
  return false;
 }

-static bool GET_PINMODE(const pin_t pin) {
-  return VALID_PIN(pin) && !IS_INPUT(pin);
+bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
 }

-static bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
-  const pin_t pin = GET_ARRAY_PIN(array_pin);
-  return (!IS_ANALOG(pin));
+bool getPinIsDigitalByIndex(const int16_t index) {
+  const pin_t pin = getPinByIndex(index);
+  return (!isAnalogPin(pin));
 }

 /**
@@ -117,7 +123,7 @@ bool pwm_status(const pin_t pin) {
  return timera_is_unit_initialized(unit) && timera_is_channel_active(unit, channel) && getPinMode(pin) == OUTPUT_PWM;
 }

-void pwm_details(const pin_t pin) {
+void printPinPWM(const pin_t pin) {
  // Get timer assignment for pin
  timera_config_t *unit;
  en_timera_channel_t channel;
@@ -161,7 +167,7 @@ void pwm_details(const pin_t pin) {
  }
 }

-void print_port(pin_t pin) {
+void printPinPort(pin_t pin) {
  const char port = 'A' + char(pin >> 4); // Pin div 16
  const int16_t gbit = PIN_MAP[pin].bit_pos;
  char buffer[8];
@@ -26,64 +26,144 @@

 #ifdef ARDUINO_ARCH_HC32

-// Get BOARD_XTAL_FREQUENCY from configuration / pins
 #include "../../inc/MarlinConfig.h"
+#include "sysclock.h"

 #include <core_hooks.h>
 #include <drivers/sysclock/sysclock_util.h>

+/***
+ * @brief Automatically calculate M, N, P values for the MPLL to reach a target frequency.
+ * @param input_frequency The input frequency.
+ * @param target_frequency The target frequency.
+ * @return The MPLL configuration structure. Q and R are not set.
+ *
+ * @note
+ * Simplified MPLL block diagram, with intermediary clocks (1) = VCO_in, (2) = VCO_out:
+ *
+ *  INPUT -> [/ M] -(1)-> [* N] -(2)-|-> [/ P] -> MPLL-P
+ */
+constexpr stc_clk_mpll_cfg_t get_mpll_config(double input_frequency, double target_frequency) {
+  // PLL input clock divider: M in [1, 24]
+  for (uint32_t M = 1; M <= 24; M++) {
+    double f_vco_in = input_frequency / M;
+
+    // 1 <= VCO_in <= 25 MHz
+    if (f_vco_in < 1e6 || f_vco_in > 25e6) continue;
+
+    // VCO multiplier: N in [20, 480]
+    for (uint32_t N = 20; N <= 480; N++) {
+      double f_vco_out = f_vco_in * N;
+
+      // 240 <= VCO_out <= 480 MHz
+      if (f_vco_out < 240e6 || f_vco_out > 480e6) continue;
+
+      // Output "P" divider: P in [2, 16]
+      for (uint32_t P = 2; P <= 16; P++) {
+        double f_calculated_out = f_vco_out / P;
+        if (f_calculated_out == target_frequency) {
+          // Found a match, return it
+          return {
+            .PllpDiv = P,
+            .PllqDiv = P, // Don't care for Q and R
+            .PllrDiv = P, // "
+            .plln =    N,
+            .pllmDiv = M
+          };
+        }
+      }
+    }
+  }
+
+  // If no valid M, N, P found, return invalid config
+  return { 0, 0, 0, 0, 0 };
+}
+
+/**
+ * @brief Get the division factor required to get the target frequency from the input frequency.
+ * @tparam input_freq The input frequency.
+ * @tparam target_freq The target frequency.
+ * @return The division factor.
+ */
+template <uint32_t input_freq, uint32_t target_freq>
+constexpr en_clk_sysclk_div_factor_t get_division_factor() {
+  // Calculate the divider to get the target frequency
+  constexpr float fdivider = static_cast<float>(input_freq) / static_cast<float>(target_freq);
+  constexpr int divider = static_cast<int>(fdivider);
+
+  // divider must be an integer
+  static_assert(fdivider == divider, "Target frequency not achievable, divider must be an integer");
+
+  // divider must be between 1 and 64 (enum range), and must be a power of 2
+  static_assert(divider >= 1 && divider <= 64, "Invalid divider, out of range");
+  static_assert((divider & (divider - 1)) == 0, "Invalid divider, not a power of 2");
+
+  // return the divider
+  switch (divider) {
+    case 1:  return ClkSysclkDiv1;
+    case 2:  return ClkSysclkDiv2;
+    case 4:  return ClkSysclkDiv4;
+    case 8:  return ClkSysclkDiv8;
+    case 16: return ClkSysclkDiv16;
+    case 32: return ClkSysclkDiv32;
+    case 64: return ClkSysclkDiv64;
+  }
+}
+
+/**
+ * @brief Validate the runtime clocks match the expected values.
+ */
+void validate_system_clocks() {
+  #define CLOCK_ASSERT(expected, actual)                  \
+    if (expected != actual) {                             \
+      SERIAL_ECHOPGM(                                     \
+        "Clock Mismatch for " #expected ": "              \
+        "expected ", expected,                            \
+        ", got ", actual                                  \
+        );                                                \
+      CORE_ASSERT_FAIL("Clock Mismatch: " #expected);     \
+    }
+
+  update_system_clock_frequencies();
+
+  CLOCK_ASSERT(F_SYSTEM_CLOCK, SYSTEM_CLOCK_FREQUENCIES.system);
+  CLOCK_ASSERT(F_HCLK, SYSTEM_CLOCK_FREQUENCIES.hclk);
+  CLOCK_ASSERT(F_EXCLK, SYSTEM_CLOCK_FREQUENCIES.exclk);
+  CLOCK_ASSERT(F_PCLK0, SYSTEM_CLOCK_FREQUENCIES.pclk0);
+  CLOCK_ASSERT(F_PCLK1, SYSTEM_CLOCK_FREQUENCIES.pclk1);
+  CLOCK_ASSERT(F_PCLK2, SYSTEM_CLOCK_FREQUENCIES.pclk2);
+  CLOCK_ASSERT(F_PCLK3, SYSTEM_CLOCK_FREQUENCIES.pclk3);
+  CLOCK_ASSERT(F_PCLK4, SYSTEM_CLOCK_FREQUENCIES.pclk4);
+}
+
+/**
+ * @brief Configure HC32 system clocks.
+ *
+ * This function is called by the Arduino core early in the startup process, before setup() is called.
+ * It is used to configure the system clocks to the desired state.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
 void core_hook_sysclock_init() {
  // Set wait cycles, as we are about to switch to 200 MHz HCLK
  sysclock_configure_flash_wait_cycles();
  sysclock_configure_sram_wait_cycles();

-  // Configure MPLLp to 200 MHz output, with different settings depending on XTAL availability
-  #if BOARD_XTAL_FREQUENCY == 8000000 // 8 MHz XTAL
-    // - M = 1   => 8 MHz / 1 = 8 MHz
-    // - N = 50  => 8 MHz * 50 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
-    sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);
+  // Select MPLL input frequency based on clock availability
+  #if BOARD_XTAL_FREQUENCY == 8000000 || BOARD_XTAL_FREQUENCY == 16000000 // 8 MHz or 16 MHz XTAL
+    constexpr uint32_t mpll_input_clock = BOARD_XTAL_FREQUENCY;

-  #elif BOARD_XTAL_FREQUENCY == 16000000 // 16 MHz XTAL
-    // - M = 1   => 16 MHz / 1 = 16 MHz
-    // - N = 50  => 16 MHz * 25 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
    sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);

-  #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #if BOARD_XTAL_FREQUENCY == 16000000
+      #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #endif

  #else // HRC (16 MHz)
-    // - M = 1   => 16 MHz / 1 = 16 MHz
-    // - N = 25  => 16 MHz * 25 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 25u,   // N
-        .pllmDiv = 1u, // M
-    };
+
+    constexpr uint32_t mpll_input_clock = 16000000;
+
    sysclock_configure_hrc();
-    sysclock_configure_mpll(ClkPllSrcHRC, &pllConf);

    // HRC could have been configured by ICG to 20 MHz
    // TODO: handle gracefully if HRC is not 16 MHz
@@ -91,29 +171,56 @@ void core_hook_sysclock_init() {
      panic("HRC is not 16 MHz");
    }

-    #ifdef BOARD_XTAL_FREQUENCY
+    #if defined(BOARD_XTAL_FREQUENCY)
      #warning "No valid XTAL frequency defined, falling back to HRC."
    #endif
+
  #endif

-  // sysclk is now configured according to F_CPU (i.e., 200MHz PLL output)
-  constexpr uint32_t sysclock = F_CPU;
+  // Automagically calculate MPLL configuration
+  constexpr stc_clk_mpll_cfg_t pllConf = get_mpll_config(mpll_input_clock, F_SYSTEM_CLOCK);
+  static_assert(pllConf.pllmDiv != 0 && pllConf.plln != 0 && pllConf.PllpDiv != 0, "MPLL auto-configuration failed");
+  sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);

-  // Setup clock divisors for sysclk = 200 MHz
-  // Note: PCLK1 is used for step+temp timers, and need to be kept at 50 MHz (until there is a better solution)
+  // Setup clock divisors
  constexpr stc_clk_sysclk_cfg_t sysClkConf = {
-      .enHclkDiv = ClkSysclkDiv1,  // HCLK  = 200 MHz (CPU)
-      .enExclkDiv = ClkSysclkDiv2, // EXCLK = 100 MHz (SDIO)
-      .enPclk0Div = ClkSysclkDiv2, // PCLK0 = 100 MHz (Timer6 (not used))
-      .enPclk1Div = ClkSysclkDiv4, // PCLK1 = 50 MHz (USART, SPI, I2S, Timer0 (step+temp), TimerA (Servo))
-      .enPclk2Div = ClkSysclkDiv8, // PCLK2 = 25 MHz (ADC)
-      .enPclk3Div = ClkSysclkDiv8, // PCLK3 = 25 MHz (I2C, WDT)
-      .enPclk4Div = ClkSysclkDiv2, // PCLK4 = 100 MHz (ADC ctl)
+    .enHclkDiv  = get_division_factor<F_SYSTEM_CLOCK, F_HCLK>(),
+    .enExclkDiv = get_division_factor<F_SYSTEM_CLOCK, F_EXCLK>(),
+    .enPclk0Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK0>(),
+    .enPclk1Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK1>(),
+    .enPclk2Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK2>(),
+    .enPclk3Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK3>(),
+    .enPclk4Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK4>(),
  };
+  sysclock_set_clock_dividers(&sysClkConf);

+  // Set power mode, before switch
+  power_mode_update_pre(F_SYSTEM_CLOCK);
+
+  // Switch to MPLL-P as system clock source
+  CLK_SetSysClkSource(CLKSysSrcMPLL);
+
+  // Set power mode, after switch
+  power_mode_update_post(F_SYSTEM_CLOCK);
+
+  // Verify clocks match expected values (at runtime)
+  #if ENABLED(MARLIN_DEV_MODE) || ENABLED(ALWAYS_VALIDATE_CLOCKS)
+    validate_system_clocks();
+  #endif
+
+  // Verify clock configuration (at compile time)
  #if ARDUINO_CORE_VERSION_INT >= GET_VERSION_INT(1, 2, 0)
+    assert_mpll_config_valid<
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv,
+      pllConf.PllqDiv,
+      pllConf.PllrDiv
+    >();
+
    assert_system_clocks_valid<
-      sysclock,
+      F_SYSTEM_CLOCK,
      sysClkConf.enHclkDiv,
      sysClkConf.enPclk0Div,
      sysClkConf.enPclk1Div,
@@ -122,18 +229,14 @@ void core_hook_sysclock_init() {
      sysClkConf.enPclk4Div,
      sysClkConf.enExclkDiv
    >();
+
+    static_assert(get_mpll_output_clock(
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv
+    ) == F_SYSTEM_CLOCK, "actual MPLL output clock does not match F_SYSTEM_CLOCK");
  #endif
-
-  sysclock_set_clock_dividers(&sysClkConf);
-
-  // Set power mode
-  power_mode_update_pre(sysclock);
-
-  // Switch to MPLL as sysclk source
-  CLK_SetSysClkSource(CLKSysSrcMPLL);
-
-  // Set power mode
-  power_mode_update_post(sysclock);
 }

 #endif // ARDUINO_ARCH_HC32
@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * HC32F460 system clock configuration.
+ *
+ * With the HC32 HAL, the various peripheral clocks (including the CPU clock) are derived
+ * from the main PLL (MPLL-P) output (referred to at F_SYSTEM_CLOCK).
+ *
+ * F_SYSTEM_CLOCK is the target frequency of the main PLL, and the PLL is automatically configured
+ * to achieve this frequency.
+ *
+ * The peripheral clocks are the result of integer division of F_SYSTEM_CLOCK.
+ * Their target frequencies are defined here, and the required division factors are calculated automatically.
+ * Note that the division factor must be a power of 2 between 1 and 64.
+ * If the target frequency is not achievable, a compile-time error will be generated.
+ *
+ * Additionally, there are interdependencies between the peripheral clocks, which are described in
+ * Section 4.4 "Working Clock Specifications" of the HC32F460 Reference Manual.
+ * With Arduino core >= 1.2.0, these interdependencies are checked at compile time.
+ * On earlier versions, you are on your own.
+ *
+ * For all clock frequencies, they can be checked at runtime by enabling the 'ALWAYS_VALIDATE_CLOCKS' define.
+ * In MARLIN_DEV_MODE, they will also be printed to the serial console by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
+
+// Target peripheral clock frequencies, must be integer divisors of F_SYSTEM_CLOCK.
+// Changing the frequency here will automagically update everything else.
+#define F_HCLK  200000000UL  // 200 MHz; CPU
+#define F_EXCLK (F_HCLK / 2) // 100 MHz; SDIO
+#define F_PCLK0 (F_HCLK / 2) // 100 MHz; Timer6 (unused)
+#define F_PCLK1 (F_HCLK / 4) //  50 MHz; USART, SPI, Timer0 (step + temp), TimerA (Servo)
+#define F_PCLK2 (F_HCLK / 8) //  25 MHz; ADC Sampling
+#define F_PCLK3 (F_HCLK / 8) //  25 MHz; I2C, WDT
+#define F_PCLK4 (F_HCLK / 2) // 100 MHz; ADC Control
+
+// MPLL-P clock target frequency. This must be >= the highest peripheral clock frequency.
+// PLL config is automatically calculated based on this value.
+#define F_SYSTEM_CLOCK F_HCLK
+
+// The Peripheral clocks are only checked at runtime if this is enabled OR MARLIN_DEV_MODE is enabled.
+// Compile time checks are always performed with Arduino core version >= 1.2.0.
+#define ALWAYS_VALIDATE_CLOCKS 1
@@ -20,6 +20,7 @@
 #pragma once
 #include <stdint.h>
 #include <Timer0.h>
+#include "sysclock.h"

 //
 // Timer Types
@@ -42,17 +43,15 @@ extern Timer0 step_timer;
 * HAL_TIMER_RATE must be known at compile time since it's used to calculate
 * STEPPER_TIMER_RATE, which is used in 'constexpr' calculations.
 * On the HC32F460 the timer rate depends on PCLK1, which is derived from the
- * system clock configured at runtime. As a workaround, we use the existing
- * assumption of a 200MHz clock, defining F_CPU as 200000000, then configure PCLK1
- * as F_CPU with a divider of 4 in 'sysclock.cpp::core_hook_sysclock_init'.
+ * system clock configured at runtime.
+ * Thus we use the 'F_PCLK1' constant defined in 'sysclock.h'.
 *
- * If you face issues with this assumption, please double-check with the values
- * printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
 *
- * TODO: If the 'constexpr' requirement is ever lifted, use TIMER0_BASE_FREQUENCY instead
+ * NOTE: If the 'constexpr' requirement is ever lifted, TIMER0_BASE_FREQUENCY could
+ * be used instead. Tho this would probably not make any noticable difference.
 */
-#define HAL_TIMER_RATE (F_CPU / 4) // i.e., 50MHz
-//#define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY
+#define HAL_TIMER_RATE F_PCLK1

 // Temperature timer
 #define TEMP_TIMER_NUM        (&temp_timer)
@@ -82,7 +82,7 @@ static inline uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, c
 }

 static void u8g_sw_spi_shift_out(uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed);
  #else
    swSpiTransfer_mode_0(val, SPI_speed);
@@ -116,15 +116,15 @@ uint8_t u8g_com_HAL_HC32_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, voi
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864) // This LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                           // SCK idle state needs to be set to the proper idle state before
-                                                 // the next chip select goes active
-          WRITE(DOGLCD_SCK, HIGH);               // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
+                                    //  the next chip select goes active
+          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
          WRITE(DOGLCD_CS, LOW);
        }
        else {
          WRITE(DOGLCD_CS, HIGH);
-          WRITE(DOGLCD_SCK, LOW);  // Set SCK to mode 0 idle state after CS goes inactive
+          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        WRITE(DOGLCD_CS, !arg_val);
@@ -52,7 +52,7 @@ uint8_t MarlinHAL::active_ch = 0;

 uint16_t MarlinHAL::adc_value() {
  const pin_t pin = analogInputToDigitalPin(active_ch);
-  if (!VALID_PIN(pin)) return 0;
+  if (!isValidPin(pin)) return 0;
  return uint16_t((Gpio::get(pin) >> 2) & 0x3FF); // return 10bit value as Marlin expects
 }

@@ -49,28 +49,28 @@ extern "C" void delay(const int msec) {
 // IO functions
 // As defined by Arduino INPUT(0x0), OUTPUT(0x1), INPUT_PULLUP(0x2)
 void pinMode(const pin_t pin, const uint8_t mode) {
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::setMode(pin, mode);
 }

 void digitalWrite(pin_t pin, uint8_t pin_status) {
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::set(pin, pin_status);
 }

 bool digitalRead(pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
+  if (!isValidPin(pin)) return false;
  return Gpio::get(pin);
 }

 void analogWrite(pin_t pin, int pwm_value) {  // 1 - 254: pwm_value, 0: LOW, 255: HIGH
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::set(pin, pwm_value);
 }

 uint16_t analogRead(pin_t adc_pin) {
-  if (!VALID_PIN(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin))) return 0;
-  return Gpio::get(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin));
+  if (!isValidPin(digitalPinToAnalogIndex(adc_pin))) return 0;
+  return Gpio::get(digitalPinToAnalogIndex(adc_pin));
 }

 char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s) {
@@ -37,29 +37,29 @@ constexpr uint8_t NUM_ANALOG_INPUTS = 16;
 constexpr uint8_t analog_offset = NUM_DIGITAL_PINS - NUM_ANALOG_INPUTS;

 // Get the digital pin for an analog index
-constexpr pin_t analogInputToDigitalPin(const int8_t p) {
-  return (WITHIN(p, 0, NUM_ANALOG_INPUTS) ? analog_offset + p : P_NC);
+constexpr pin_t analogInputToDigitalPin(const int8_t a) {
+  return (WITHIN(a, 0, NUM_ANALOG_INPUTS - 1) ? analog_offset + a : P_NC);
 }

 // Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
-  return (WITHIN(p, analog_offset, NUM_DIGITAL_PINS) ? p - analog_offset : P_NC);
+constexpr int8_t digitalPinToAnalogIndex(const pin_t pin) {
+  return (WITHIN(pin, analog_offset, NUM_DIGITAL_PINS - 1) ? pin - analog_offset : P_NC);
 }

 // Return the index of a pin number
 constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) { return pin; }

 // Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t p) { return WITHIN(p, 0, NUM_DIGITAL_PINS); }
+constexpr bool isValidPin(const pin_t pin) { return WITHIN(pin, 0, NUM_DIGITAL_PINS - 1); }

 // Test whether the pin is PWM
-constexpr bool PWM_PIN(const pin_t p) { return false; }
+constexpr bool PWM_PIN(const pin_t) { return false; }

 // Test whether the pin is interruptible
-constexpr bool INTERRUPT_PIN(const pin_t p) { return false; }
+constexpr bool INTERRUPT_PIN(const pin_t) { return false; }

 // Get the pin number at the given index
-constexpr pin_t GET_PIN_MAP_PIN(const int16_t ind) { return ind; }
+constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) { return pin_t(index); }

 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
@@ -19,30 +19,50 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for X86_64
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for Linux Native
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL   NUM_DIGITAL_PINS
-#define IS_ANALOG(P)        (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p)  digitalRead(p)
-#define GET_ARRAY_PIN(p)    pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD      16 // space needed to be pretty if not first name assigned to a pin

+#define getPinByIndex(x) pin_array[x].pin
+
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+
 // active ADC function/mode/code values for PINSEL registers
-constexpr int8_t ADC_pin_mode(pin_t pin) { return -1; }
+constexpr int8_t ADC_pin_mode(const pin_t) { return -1; }

-int8_t get_pin_mode(const pin_t pin) { return VALID_PIN(pin) ? 0 : -1; }
+// The pin and index are the same on this platform
+bool getPinIsDigitalByIndex(const pin_t pin) {
+  return (!isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
+}

-bool GET_PINMODE(const pin_t pin) {
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0)
+
+#define digitalRead_mod(P) digitalRead(P)
+
+int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? 0 : -1; }
+
+bool getValidPinMode(const pin_t pin) {
  const int8_t pin_mode = get_pin_mode(pin);
  if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // Invalid pin or active analog pin
    return false;
@@ -50,11 +70,11 @@ bool GET_PINMODE(const pin_t pin) {
  return (Gpio::getMode(pin) != 0); // Input/output state
 }

-bool GET_ARRAY_IS_DIGITAL(const pin_t pin) {
-  return (!IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
-}
-
-void pwm_details(const pin_t pin) {}
+void printPinPWM(const pin_t) {}
 bool pwm_status(const pin_t) { return false; }

-void print_port(const pin_t) {}
+void printPinPort(const pin_t) {}
+
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
@@ -28,12 +28,6 @@
                        // spiBeginTransaction.
 #endif

-// Onboard SD
-//#define SD_SCK_PIN     P0_07
-//#define SD_MISO_PIN    P0_08
-//#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06
-
 // External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        50
@@ -44,9 +38,3 @@
 #ifndef SD_MOSI_PIN
  #define SD_MOSI_PIN       52
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         53
-#endif
-#ifndef SDSS
-  #define SDSS       SD_SS_PIN
-#endif
@@ -35,8 +35,6 @@
 #include <CDCSerial.h>
 #include <usb/mscuser.h>

-DefaultSerial1 USBSerial(false, UsbSerial);
-
 uint32_t MarlinHAL::adc_result = 0;
 pin_t MarlinHAL::adc_pin = 0;

@@ -38,72 +38,15 @@ extern "C" volatile uint32_t _millis;
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
-#include "MarlinSerial.h"

 #include <adc.h>
 #include <pinmapping.h>
-#include <CDCSerial.h>

-// ------------------------
-// Serial ports
-// ------------------------
+//
+// Serial Ports
+//

-typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
-extern DefaultSerial1 USBSerial;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1
-  #define MYSERIAL1 USBSerial
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #define MYSERIAL2 USBSerial
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #define MYSERIAL3 USBSerial
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL USBSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL USBSerial
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-  #if HAS_DGUS_LCD
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
-  #endif
-#endif
+#include "MarlinSerial.h"

 //
 // Interrupts
@@ -137,12 +80,12 @@ extern DefaultSerial1 USBSerial;
 //

 // Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t pin) {
+constexpr bool isValidPin(const pin_t pin) {
  return LPC176x::pin_is_valid(pin);
 }

 // Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
+constexpr int8_t digitalPinToAnalogIndex(const pin_t pin) {
  return (LPC176x::pin_is_valid(pin) && LPC176x::pin_has_adc(pin)) ? pin : -1;
 }

@@ -159,7 +102,7 @@ constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
 // P0.6 thru P0.9 are for the onboard SD card
-#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
+#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09

 // ------------------------
 // Defines
@@ -25,6 +25,8 @@

 #include "../../inc/MarlinConfig.h"

+DefaultSerial1 USBSerial(false, UsbSerial);
+
 #if USING_HW_SERIAL0
  MarlinSerial _MSerial0(LPC_UART0);
  MSerialT MSerial0(true, _MSerial0);
@@ -21,6 +21,7 @@
 */
 #pragma once

+#include <CDCSerial.h>
 #include <HardwareSerial.h>
 #include <WString.h>

@@ -30,6 +31,18 @@
 #endif
 #include "../../core/serial_hook.h"

+typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
+extern DefaultSerial1 USBSerial;
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#define USB_SERIAL_PORT(...) USBSerial
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
+#endif
+
 class MarlinSerial : public HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE> {
 public:
  MarlinSerial(LPC_UART_TypeDef *UARTx) : HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE>(UARTx) { }
@@ -146,6 +146,12 @@ void setup_endstop_interrupts() {
    #endif
    _ATTACH(Z_MIN_PROBE_PIN);
  #endif
+  #if USE_CALIBRATION
+    #if !LPC1768_PIN_INTERRUPT_M(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
  #if USE_I_MAX
    #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
      #error "I_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
@@ -26,8 +26,10 @@

 void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
  if (!LPC176x::pin_is_valid(pin)) return;
-  if (LPC176x::pwm_attach_pin(pin))
-    LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);  // map 1-254 onto PWM range
+  if (LPC176x::pwm_attach_pin(pin)) {
+    const uint32_t duty = map(invert ? v_size - v : v, 0, v_size, 0, LPC176x::pwm_get_period(pin));
+    LPC176x::pwm_write(pin, duty);
+  }
 }

 void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
@@ -66,7 +66,7 @@
 #define _WRITE(IO,V)          WRITE_PIN(IO,V)

 /// toggle a pin
-#define _TOGGLE(IO)           _WRITE(IO, !READ(IO))
+#define _TOGGLE(IO)           LPC176x::gpio_toggle(IO)

 /// set pin as input
 #define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
@@ -121,7 +121,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
    #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
      #error "Serial port pins (1) conflict with Encoder Buttons!"
    #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \
-       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
+       || ANY_RX(1, LCD_SDSS_PIN, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
      #error "Serial port pins (1) conflict with LCD pins!"
    #endif
  #endif
@@ -211,8 +211,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
      #error "SCL0 overlaps with Encoder Button!"
    #elif IS_SCL0(SD_SS_PIN)
      #error "SCL0 overlaps with SD_SS_PIN!"
-    #elif IS_SCL0(LCD_SDSS)
-      #error "SCL0 overlaps with LCD_SDSS!"
+    #elif IS_SCL0(LCD_SDSS_PIN)
+      #error "SCL0 overlaps with LCD_SDSS_PIN!"
    #endif
    #undef PIN_IS_SDA0
    #undef IS_SCL0
@@ -19,22 +19,35 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for LPC1768
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for LPC1768/9
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0)
+#define digitalRead_mod(P) extDigitalRead(P)
+#define getPinByIndex(x) pin_array[x].pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(P), LPC176x::pin_bit(P)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(P)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 17 // space needed to be pretty if not first name assigned to a pin

 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
@@ -42,15 +55,15 @@
  #define M43_NEVER_TOUCH(Q) ((Q) == P0_29 || (Q) == P0_30 || (Q) == P2_09)  // USB pins
 #endif

-bool GET_PINMODE(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
  if (!LPC176x::pin_is_valid(pin) || LPC176x::pin_adc_enabled(pin)) // Invalid pin or active analog pin
    return false;

  return LPC176x::gpio_direction(pin);
 }

-#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
+#define getPinIsDigitalByIndex(x) ((bool) pin_array[x].is_digital)

-void print_port(const pin_t) {}
-void pwm_details(const pin_t) {}
+void printPinPort(const pin_t) {}
+void printPinPWM(const pin_t) {}
 bool pwm_status(const pin_t) { return false; }
@@ -28,12 +28,12 @@
                        // spiBeginTransaction.
 #endif

-/** onboard SD card */
-//#define SD_SCK_PIN        P0_07
-//#define SD_MISO_PIN       P0_08
-//#define SD_MOSI_PIN       P0_09
-//#define SD_SS_PIN         P0_06
-/** external */
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+
+// External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        P0_15
 #endif
@@ -43,10 +43,3 @@
 #ifndef SD_MOSI_PIN
  #define SD_MOSI_PIN       P0_18
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         P1_23
-#endif
-#if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h
-  #undef SDSS
-  #define SDSS          SD_SS_PIN
-#endif
@@ -132,7 +132,7 @@ uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck
 static uint8_t SPI_speed = 0;

 static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
  #else
    swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
@@ -160,15 +160,15 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)  // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                            //   SCK idle state needs to be set to the proper idle state before
-                                                  //   the next chip select goes active
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);     // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3                    // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                          // SCK idle state needs to be set to the proper idle state before
+                                                //  the next chip select goes active
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
          u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
        }
        else {
          u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);  // Set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
@@ -13,9 +13,9 @@ if pioutil.is_pio_build():
    target_drive = "REARM"

    import platform
-
    current_OS = platform.system()
-    Import("env")
+
+    env = pioutil.env

    def print_error(e):
        print('\nUnable to find destination disk (%s)\n' \
@@ -37,7 +37,7 @@ if pioutil.is_pio_build():
                #
                # platformio.ini will accept this for a Windows upload port designation: 'upload_port = L:'
                #   Windows - doesn't care about the disk's name, only cares about the drive letter
-                import subprocess,string
+                import subprocess, string
                from ctypes import windll
                from pathlib import PureWindowsPath

@@ -1,125 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include "../shared/Delay.h"
-#include "../../../gcode/parser.h"
-
-DefaultSerial1 USBSerial(false, MCDCSerial0);
-
-uint32_t MarlinHAL::adc_result = 0;
-
-// U8glib required functions
-extern "C" {
-  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
-  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
-  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
-  void u8g_Delay(uint16_t val)       { delay(val); }
-}
-
-// return free heap space
-int freeMemory() {
-  char stack_end;
-  void *heap_start = malloc(sizeof(uint32_t));
-  if (heap_start == 0) return 0;
-
-  uint32_t result = (uint32_t)&stack_end - (uint32_t)heap_start;
-  free(heap_start);
-  return result;
-}
-
-void MarlinHAL::reboot() { MCUCore::nvic_system_reset(); }
-
-uint8_t MarlinHAL::get_reset_source() {
-  #if ENABLED(USE_WATCHDOG)
-    if (watchdog_timed_out()) return RST_WATCHDOG;
-  #endif
-  return RST_POWER_ON;
-}
-
-void MarlinHAL::clear_reset_source() { watchdog_clear_timeout_flag(); }
-
-void flashFirmware(const int16_t) {
-  delay(500);          // Give OS time to disconnect
-  //USB_Connect(false);  // USB clear connection
-  delay(1000);         // Give OS time to notice
-  hal.reboot();
-}
-
-#if ENABLED(USE_WATCHDOG)
-
-  #define WDT_TIMEOUT TERN(WATCHDOG_DURATION_8S, 8.0f, 4.0f) // 4 or 8 second timeout
-
-  void MarlinHAL::watchdog_init() {
-    #if ENABLED(WATCHDOG_RESET_MANUAL)
-      // We enable the watchdog timer, but only for the interrupt.
-
-      // Configure WDT to only trigger an interrupt
-      // Disable WDT interrupt (just in case, to avoid triggering it!)
-      NVIC_DisableIRQ(WDT_IRQn);
-
-      // We NEED memory barriers to ensure Interrupts are actually disabled!
-      // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
-      __DSB();
-      __ISB();
-
-      // WDT defaults to trigger an interrupt
-
-      // Configure and enable WDT interrupt.
-      NVIC_ClearPendingIRQ(WDT_IRQn);
-      NVIC_SetPriority(WDT_IRQn, 0); // Use highest priority, so we detect all kinds of lockups
-      NVIC_EnableIRQ(WDT_IRQn);
-    #else
-      MCUI::watchdog_set_timeout_triggers_reset();
-    #endif
-    MCUI::watchdog_set_timeout_in_seconds(WDT_TIMEOUT);
-    MCUI::watchdog_enable();
-  }
-
-  void MarlinHAL::watchdog_refresh() {
-    MCUI::watchdog_feed();
-    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
-      static millis_t next_flash = millis();
-      if (ELAPSED(millis(), next_flash)) {
-        next_flash = millis() + 200;
-        TOGGLE(LED_PIN);  // heartbeat indicator
-      }
-    #endif
-  }
-
-  // Timeout state
-  bool MarlinHAL::watchdog_timed_out() { return MCUI::watchdog_has_triggered(); }
-  void MarlinHAL::watchdog_clear_timeout_flag() { MCUI::watchdog_clear_timeout_flag(); }
-
-#endif // USE_WATCHDOG
-
-// For M42/M43, scan command line for pin code
-//   return index into pin map array if found and the pin is valid.
-//   return dval if not found or not a valid pin.
-int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
-  const uint16_t val = (uint16_t)parser.intval(code, -1), port = val / 100, pin = val % 100;
-  const  int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? ((port << 5) | pin) : -2;
-  return ind > -1 ? ind : dval;
-}
-
-#endif // TARGET_LPC4078
@@ -1,276 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * HAL_LPC1768/HAL.h
- * Hardware Abstraction Layer for NXP LPC1768
- */
-
-#define CPU_32_BIT
-
-#include <stdint.h>
-#include <stdarg.h>
-#include <algorithm>
-
-#include "../shared/Marduino.h"
-#include "../shared/Delay.h"
-#include "../shared/math_32bit.h"
-#include "../shared/HAL_SPI.h"
-#include "fastio.h"
-#include "MarlinSerial.h"
-
-#include <mcu_interface.h>
-
-// ------------------------
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(MCDCSerial0) > DefaultSerial1;
-extern DefaultSerial1 USBSerial;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1
-  #define MYSERIAL1 USBSerial
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #define MYSERIAL2 USBSerial
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #define MYSERIAL3 USBSerial
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL USBSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL USBSerial
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-  #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.available()
-  #endif
-#endif
-
-//
-// Interrupts
-//
-
-#define CRITICAL_SECTION_START()  const bool irqon = !MCUCore::primask(); MCUCore::nvic_interrupts_disable()
-#define CRITICAL_SECTION_END()    if (irqon) MCUCore::nvic_interrupts_enable()
-#define cli() noInterrupts()
-#define sei() interrupts()
-//
-// ADC
-//
-
-#define ADC_MEDIAN_FILTER_SIZE (23) // Higher values increase step delay (phase shift),
-                                    // (ADC_MEDIAN_FILTER_SIZE + 1) / 2 sample step delay (12 samples @ 500Hz: 24ms phase shift)
-                                    // Memory usage per ADC channel (bytes): (6 * ADC_MEDIAN_FILTER_SIZE) + 16
-                                    // 8 * ((6 * 23) + 16 ) = 1232 Bytes for 8 channels
-
-#define ADC_LOWPASS_K_VALUE    (2)  // Higher values increase rise time
-                                    // Rise time sample delays for 100% signal convergence on full range step
-                                    // (1 : 13, 2 : 32, 3 : 67, 4 : 139, 5 : 281, 6 : 565, 7 : 1135, 8 : 2273)
-                                    // K = 6, 565 samples, 500Hz sample rate, 1.13s convergence on full range step
-                                    // Memory usage per ADC channel (bytes): 4 (32 Bytes for 8 channels)
-
-#define HAL_ADC_VREF            3.3 // ADC voltage reference
-
-#define HAL_ADC_RESOLUTION     12   // 15 bit maximum, raw temperature is stored as int16_t
-#define HAL_ADC_FILTERED            // Disable oversampling done in Marlin as ADC values already filtered in HAL
-
-//
-// Pin Mapping for M42, M43, M226
-//
-
-// Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t pin) {
-  return MCUI::pin_is_valid(pin);
-}
-
-// Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
-  return (MCUI::pin_is_valid(pin) && MCUI::pin_has_adc(pin)) ? pin : -1;
-}
-
-//
-// Misc. Functions
-//
-#ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) (p)
-#endif
-
-
-// Return the index of a pin number
-constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) {
-  return MCUI::pin_index(pin);
-}
-
-// Get the pin number at the given index
-constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
-  return MCUI::pin_index(index);
-}
-
-// Parse a G-code word into a pin index
-int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
-// P0.6 thru P0.9 are for the onboard SD card
-#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
-
-// ------------------------
-// Defines
-// ------------------------
-
-void flashFirmware(const int16_t);
-
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-
-// Default graphical display delays
-#define CPU_ST7920_DELAY_1 600
-#define CPU_ST7920_DELAY_2 750
-#define CPU_ST7920_DELAY_3 750
-
-// ------------------------
-// Free Memory Accessor
-// ------------------------
-
-#pragma GCC diagnostic push
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-int freeMemory();
-
-#pragma GCC diagnostic pop
-
-// ------------------------
-// MarlinHAL Class
-// ------------------------
-
-class MarlinHAL {
-public:
-
-  // Earliest possible init, before setup()
-  MarlinHAL() {}
-
-  static void init();          // Called early in setup()
-  static void init_board() {}  // Called less early in setup()
-  static void reboot();        // Restart the firmware from 0x0
-
-  // Interrupts
-  static bool isr_state() { return MCUCore::primask(); }
-  static void isr_on()  { MCUCore::nvic_interrupts_enable(); }
-  static void isr_off() {  MCUCore::nvic_interrupts_disable(); }
-
-  static void delay_ms(const int ms) { DELAY_US(ms * 1000); }
-
-  // Watchdog
-  static void watchdog_init() IF_DISABLED(USE_WATCHDOG, {});
-  static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
-  static bool watchdog_timed_out() IF_DISABLED(USE_WATCHDOG, { return false; });
-  static void watchdog_clear_timeout_flag() IF_DISABLED(USE_WATCHDOG, {});
-
-  // Tasks, called from idle()
-  static void idletask();
-
-  // Reset
-  static uint8_t get_reset_source();
-  static void clear_reset_source();
-
-  // Free SRAM
-  static int freeMemory() { return ::freeMemory(); }
-
-  //
-  // ADC Methods
-  //
-
-  using FilteredADC = MCUI::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
-
-  // Called by Temperature::init once at startup
-  static void adc_init() {
-    // Turn on and initialise ADC in burst mode
-    MCUI::adc_hardware.init();
-    MCUI::adc_hardware.burst_start();
-  }
-
-  // Called by Temperature::init for each sensor at startup
-  static void adc_enable(const pin_t pin) {
-    FilteredADC::enable_channel(pin);
-  }
-
-  // Begin ADC sampling on the given pin. Called from Temperature::isr!
-  static uint32_t adc_result;
-  static void adc_start(const pin_t pin) {
-    adc_result = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits
-  }
-
-  // Is the ADC ready for reading?
-  static bool adc_ready() { return true; }
-
-  // The current value of the ADC register
-  static uint16_t adc_value() { return uint16_t(adc_result); }
-
-  /**
-   * Set the PWM duty cycle for the pin to the given value.
-   * Optionally invert the duty cycle [default = false]
-   * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
-   */
-  static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
-
-  /**
-   * Set the frequency of the timer corresponding to the provided pin
-   * All Hardware PWM pins will run at the same frequency and
-   * All Software PWM pins will run at the same frequency
-   */
-  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
-};
@@ -1,354 +0,0 @@
-// /**
-//  * Marlin 3D Printer Firmware
-//  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
-//  *
-//  * Based on Sprinter and grbl.
-//  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
-//  *
-//  * This program is free software: you can redistribute it and/or modify
-//  * it under the terms of the GNU General Public License as published by
-//  * the Free Software Foundation, either version 3 of the License, or
-//  * (at your option) any later version.
-//  *
-//  * This program is distributed in the hope that it will be useful,
-//  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  * GNU General Public License for more details.
-//  *
-//  * You should have received a copy of the GNU General Public License
-//  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-//  *
-//  */
-
-// /**
-//  * Software SPI functions originally from Arduino Sd2Card Library
-//  * Copyright (c) 2009 by William Greiman
-//  */
-
-// /**
-//  * For TARGET_LPC4078
-//  */
-
-// /**
-//  * Hardware SPI and Software SPI implementations are included in this file.
-//  * The hardware SPI runs faster and has higher throughput but is not compatible
-//  * with some LCD interfaces/adapters.
-//  *
-//  * Control of the slave select pin(s) is handled by the calling routines.
-//  *
-//  * Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
-//  * SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
-//  * WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
-//  * active. If any of these pins are shared then the software SPI must be used.
-//  *
-//  * A more sophisticated hardware SPI can be found at the following link.
-//  * This implementation has not been fully debugged.
-//  * https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
-//  */
-
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include <SPI.h>
-
-// Hardware SPI and SPIClass
-
-#include "../shared/HAL_SPI.h"
-
-#define LPC_SOFTWARE_SPI
-
-// ------------------------
-// Public functions
-// ------------------------
-#if ENABLED(LPC_SOFTWARE_SPI)
-  #include "SoftwareSPI.h"
-
-  // Software SPI
-  static uint8_t SPI_speed = SPI_FULL_SPEED;
-
-  static uint8_t spiTransfer(uint8_t b) {
-    return swSpiTransfer(b, SPI_speed, SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
-  }
-
-  void spiBegin() {
-    swSpiBegin(SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
-  }
-
-  void spiInit(uint8_t spiRate) {
-    SPI_speed = swSpiInit(spiRate, SD_SCK_PIN, SD_MOSI_PIN);
-  }
-
-  uint8_t spiRec() { return spiTransfer(0xFF); }
-
-  void spiRead(uint8_t*buf, uint16_t nbyte) {
-    for (int i = 0; i < nbyte; i++)
-      buf[i] = spiTransfer(0xFF);
-  }
-
-  void spiSend(uint8_t b) { (void)spiTransfer(b); }
-
-  void spiSend(const uint8_t *buf, size_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
-    (void)spiTransfer(token);
-    for (uint16_t i = 0; i < 512; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-#else
-
-  #ifdef SD_SPI_SPEED
-    #define INIT_SPI_SPEED SD_SPI_SPEED
-  #else
-    #define INIT_SPI_SPEED SPI_FULL_SPEED
-  #endif
-
-  void spiBegin() { spiInit(INIT_SPI_SPEED); } // Set up SCK, MOSI & MISO pins for SSP0
-
-  void spiInit(uint8_t spiRate) {
-    #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
-      SPI.setModule(1);
-    #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
-      SPI.setModule(2);
-    #endif
-    SPI.setDataSize(DATA_SIZE_8BIT);
-    SPI.setDataMode(SPI_MODE0);
-
-    SPI.setClock(SPISettings::spiRate2Clock(spiRate));
-    SPI.begin();
-  }
-
-  static uint8_t doio(uint8_t b) {
-    return SPI.transfer(b & 0x00FF) & 0x00FF;
-  }
-
-  void spiSend(uint8_t b) { doio(b); }
-
-  void spiSend(const uint8_t *buf, size_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
-  }
-
-  void spiSend(uint32_t chan, byte b) {}
-
-  void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {}
-
-  // Read single byte from SPI
-  uint8_t spiRec() { return doio(0xFF); }
-
-  uint8_t spiRec(uint32_t chan) { return 0; }
-
-  // Read from SPI into buffer
-  void spiRead(uint8_t *buf, uint16_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
-  }
-
-  uint8_t spiTransfer(uint8_t b) { return doio(b); }
-
-  // Write from buffer to SPI
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
-   (void)spiTransfer(token);
-    for (uint16_t i = 0; i < 512; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-  // Begin SPI transaction, set clock, bit order, data mode
-  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
-    // TODO: Implement this method
-  }
-
-#endif // LPC_SOFTWARE_SPI
-
-// /**
-//  * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
-//  */
-static inline void waitSpiTxEnd(void *spi_d) {
-  #warning unimplemented
-  // while (SSP_GetStatus(spi_d, SSP_STAT_TXFIFO_EMPTY) == RESET) { /* nada */ } // wait until TXE=1
-  // while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ }     // wait until BSY=0
-}
-
-// // Retain the pin init state of the SPI, to avoid init more than once,
-// // even if more instances of SPIClass exist
-static bool spiInitialised[BOARD_NR_SPI] = { false };
-
-SPIClass::SPIClass(uint8_t device) {
-//   // Init things specific to each SPI device
-//   // clock divider setup is a bit of hack, and needs to be improved at a later date.
-
-  #if BOARD_NR_SPI >= 1
-    _settings[0].device_id = 0;
-    _settings[0].m_config.pin_miso = BOARD_SPI1_MISO_PIN;
-    _settings[0].m_config.pin_mosi = BOARD_SPI1_MOSI_PIN;
-    _settings[0].m_config.pin_sck  = BOARD_SPI1_SCK_PIN;
-    _settings[0].m_config.pin_ssel = BOARD_SPI1_NSS_PIN;
-//     _settings[0].dataMode = SPI_MODE0;
-//     _settings[0].dataSize = DATA_SIZE_8BIT;
-//     _settings[0].clock = SPI_CLOCK_MAX;
-//     //_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
-  #endif
-
-  #if BOARD_NR_SPI >= 2
-    _settings[1].device_id = 2;
-    _settings[1].m_config.pin_miso = BOARD_SPI2_MISO_PIN;
-    _settings[1].m_config.pin_mosi = BOARD_SPI2_MOSI_PIN;
-    _settings[1].m_config.pin_sck  = BOARD_SPI2_SCK_PIN;
-    _settings[1].m_config.pin_ssel = BOARD_SPI2_NSS_PIN;
-//     _settings[1].dataMode = SPI_MODE0;
-//     _settings[1].dataSize = DATA_SIZE_8BIT;
-//     _settings[1].clock = SPI_CLOCK_MAX;
-//     //_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
-  #endif
-
-  setModule(device);
-
-//   // Init the GPDMA controller
-//   // TODO: call once in the constructor? or each time?
-//   GPDMA_Init();
-}
-
-SPIClass::SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel) {
-  #if BOARD_NR_SPI >= 1
-    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
-  #endif
-  #if BOARD_NR_SPI >= 2
-    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
-  #endif
-}
-
-void SPIClass::begin() {
-//   // Init the SPI pins in the first begin call
-  if ((_currentSetting->device_id == 0 && spiInitialised[0] == false) ||
-      (_currentSetting->device_id == 1 && spiInitialised[1] == false) ||
-      (_currentSetting->device_id == 2 && spiInitialised[2] == false)) {
-    MCUI::SSP::init(_currentSetting->device_id, _currentSetting->m_config);
-    spiInitialised[_currentSetting->device_id] = true;
-  }
-  updateSettings();
-}
-
-void SPIClass::beginTransaction(const SPISettings &cfg) {
-  setBitOrder(cfg.bitOrder);
-  setDataMode(cfg.dataMode);
-  setDataSize(cfg.dataSize);
-  //setClockDivider(determine_baud_rate(_currentSetting->spi_d, settings.clock));
-  begin();
-}
-
-uint8_t SPIClass::transfer(const uint16_t b) {
-  uint16_t rx_word = 0;
-  // clear rx fifo
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) == 1);
-  MCUI::SSP::write(_currentSetting->device_id, b);
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) != 1);
-  return rx_word;
-}
-
-uint16_t SPIClass::transfer16(const uint16_t data) {
-   return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
-}
-
-void SPIClass::end() {
-//   // Neither is needed for Marlin
-//   //SSP_Cmd(_currentSetting->spi_d, DISABLE);
-//   //SSP_DeInit(_currentSetting->spi_d);
-}
-
-void SPIClass::send(uint8_t data) {
-  MCUI::SSP::write(_currentSetting->device_id, data);
-}
-
-void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
-//   //TODO: LPC dma can only write 0xFFF bytes at once.
-//   GPDMA_Channel_CFG_Type GPDMACfg;
-
-//   /* Configure GPDMA channel 0 -------------------------------------------------------------*/
-//   /* DMA Channel 0 */
-//   GPDMACfg.ChannelNum = 0;
-//   // Source memory
-//   GPDMACfg.SrcMemAddr = (uint32_t)buf;
-//   // Destination memory - Not used
-//   GPDMACfg.DstMemAddr = 0;
-//   // Transfer size
-//   GPDMACfg.TransferSize = length;
-//   // Transfer width
-//   GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
-//   // Transfer type
-//   GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
-//   // Source connection - unused
-//   GPDMACfg.SrcConn = 0;
-//   // Destination connection
-//   GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
-
-//   GPDMACfg.DMALLI = 0;
-
-//   // Enable dma on SPI
-//   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
-
-//   // Only increase memory if minc is true
-//   GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
-
-//   // Setup channel with given parameter
-//   GPDMA_Setup(&GPDMACfg);
-
-//   // Enable DMA
-//   GPDMA_ChannelCmd(0, ENABLE);
-
-//   // Wait for data transfer
-//   while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
-
-//   // Clear err and int
-//   GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
-//   GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
-
-//   // Disable DMA
-//   GPDMA_ChannelCmd(0, DISABLE);
-
-//   waitSpiTxEnd(_currentSetting->spi_d);
-
-//   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
-}
-
-uint16_t SPIClass::read() {
-  uint16_t rx_word = 0;
-  MCUI::SSP::read(_currentSetting->device_id, &rx_word);
-  return rx_word;
-}
-
-void SPIClass::read(uint8_t *buf, uint32_t len) {
-  uint16_t rx_word = 0;
-  // clear rx fifo
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) == 1);
-  for (uint16_t i = 0; i < len; i++) {
-    MCUI::SSP::write(_currentSetting->device_id, 0xFF);
-    while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) != 1);
-    buf[i] = rx_word;
-  }
-}
-
-void SPIClass::setClock(uint32_t clock) { _currentSetting->clock = clock; }
-
-void SPIClass::setModule(uint8_t device) { _currentSetting = &_settings[device - 1]; } // SPI channels are called 1, 2, and 3 but the array is zero-indexed
-
-void SPIClass::setBitOrder(uint8_t bitOrder) { _currentSetting->bitOrder = bitOrder; }
-
-void SPIClass::setDataMode(uint8_t dataMode) { _currentSetting->dataMode = dataMode; }
-
-void SPIClass::setDataSize(uint32_t dataSize) { _currentSetting->dataSize = dataSize; }
-
-// /**
-//  * Set up/tear down
-//  */
-void SPIClass::updateSettings() { }
-
-SPIClass SPI(1);
-
-#if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
-  SPIClass SPI(1);
-#elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
-  SPIClass SPI(2);
-#endif
-
-#endif // TARGET_LPC4078
@@ -1,78 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "MarlinSerial.h"
-
-#include "../../inc/MarlinConfig.h"
-
-MarlinCDCSerial MCDCSerial0;
-
-#define MarlinSerial(ID) \
-  MarlinSerial _MSerial##ID(ID); \
-  MSerialT MSerial##ID(true, _MSerial##ID)
-
-#if USING_HW_SERIAL0
-  MarlinSerial(0);
-#endif
-#if USING_HW_SERIAL1
-  MarlinSerial(1);
-#endif
-#if USING_HW_SERIAL2
-  MarlinSerial(2);
-#endif
-#if USING_HW_SERIAL3
-  MarlinSerial(3);
-#endif
-
-#if ENABLED(EMERGENCY_PARSER)
-
-  bool MarlinSerial::recv_callback(const char c) {
-    // Need to figure out which serial port we are and react in consequence (Marlin does not have CONTAINER_OF macro)
-    if (false) {}
-    #if USING_HW_SERIAL0
-      else if (this == &_MSerial0) emergency_parser.update(MSerial0.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL1
-      else if (this == &_MSerial1) emergency_parser.update(MSerial1.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL2
-      else if (this == &_MSerial2) emergency_parser.update(MSerial2.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL3
-      else if (this == &_MSerial3) emergency_parser.update(MSerial3.emergency_state, c);
-    #endif
-    return true;
-  }
-
-  #include "../../feature/e_parser.h"
-
-  EmergencyParser::State emergency_state;
-
-  bool CDC_RecvCallback(const char c) {
-    emergency_parser.update(emergency_state, c);
-    return true;
-  }
-
-#endif
-
-#endif // TARGET_LPC4078
@@ -1,108 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <mcu_interface.h>
-#include <interface/uart.h>
-#include <driver/usb_cdc.h>
-
-#include <UART.h>
-
-#include "../../inc/MarlinConfigPre.h"
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-#include "../../core/serial_hook.h"
-
-#ifndef SERIAL_PORT
-  #define SERIAL_PORT 0
-#endif
-#ifndef RX_BUFFER_SIZE
-  #define RX_BUFFER_SIZE 128
-#endif
-#ifndef TX_BUFFER_SIZE
-  #define TX_BUFFER_SIZE 32
-#endif
-
-class MarlinCDCSerial : public HardwareSerial {
-  public:
-    MarlinCDCSerial() {}
-    void begin(unsigned long baudrate) override {}
-    void begin(unsigned long baudrate, uint16_t config) override { }
-    void end() override { }
-    int available() override {
-      return MCUI::CDCSerial0::available();
-    }
-    int peek() override { char c = 0; return MCUI::CDCSerial0::peek((uint8_t*)&c)? c : -1; }
-    int read() override { char c = 0; return MCUI::CDCSerial0::read((uint8_t*)&c, 1)? c : -1; }
-    void flush() override {};
-    size_t write(uint8_t c) override { return write(&c, 1); }
-    size_t write(const uint8_t *buffer, size_t size) override { return MCUI::CDCSerial0::connected() ? MCUI::CDCSerial0::write(buffer, size) : 0; }
-    using Print::write;
-    operator bool() override { return true; }
-};
-extern MarlinCDCSerial MCDCSerial0;
-
-class MarlinSerial : public HardwareSerial {
-  public:
-    MarlinSerial(const uint32_t uart_id) : uart_device(uart_id) {}
-    void begin(unsigned long baudrate) override {
-      uart_device.configure_pins(P0_02, P0_03);
-      uart_device.init({ .baud = baudrate });
-      #if ENABLED(EMERGENCY_PARSER)
-      uart_device.set_rx_callback([this](char rx_value){ return this->recv_callback(rx_value); } );
-      #endif
-    }
-    void begin(unsigned long baudrate, uint16_t config) override {
-      begin(baudrate);
-    }
-    void end() override { }
-    int available() override {
-      return uart_device.rx_available();
-    }
-    int peek() override { char c = 0; return uart_device.peek(&c)? c : -1; }
-    int read() override { char c = 0; return uart_device.read(&c)? c : -1; }
-    void flush() override {};
-    size_t write(uint8_t c) override { return write(&c, 1); }
-    size_t write(const uint8_t *buffer, size_t size) override { return uart_device.write((const char *)buffer, size); }
-    using Print::write; // pull in write(str) and write(buf, size) from Print
-    operator bool() override { return true; }
-
-    bool recv_callback(char value);
-  private:
-    MCUI::BufferedUARTC uart_device;
-};
-
-// On LPC176x framework, HardwareSerial does not implement the same interface as Arduino's Serial, so overloads
-// of 'available' and 'read' method are not used in this multiple inheritance scenario.
-// Instead, use a ForwardSerial here that adapts the interface.
-typedef ForwardSerial1Class<MarlinSerial> MSerialT;
-extern MSerialT MSerial0;
-extern MSerialT MSerial1;
-extern MSerialT MSerial2;
-extern MSerialT MSerial3;
-
-// Consequently, we can't use a RuntimeSerial either. The workaround would be to use
-// a RuntimeSerial<ForwardSerial<MarlinSerial>> type here. Ignore for now until it's actually required.
-#if ENABLED(SERIAL_RUNTIME_HOOK)
-  #error "SERIAL_RUNTIME_HOOK is not yet supported for LPC176x."
-#endif
@@ -1,51 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include "HAL.h"
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-
-#include "../shared/MinSerial.h"
-#include <debug_frmwrk.h>
-
-static void TX(char c) { _DBC(c); }
-void install_min_serial() { HAL_min_serial_out = &TX; }
-
-#if DISABLED(DYNAMIC_VECTORTABLE)
-extern "C" {
-  __attribute__((naked)) void JumpHandler_ASM() {
-    __asm__ __volatile__ (
-      "b CommonHandler_ASM\n"
-    );
-  }
-  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
-}
-#endif
-
-#endif // POSTMORTEM_DEBUGGING
-#endif // TARGET_LPC4078
@@ -1,47 +0,0 @@
-#ifdef TARGET_LPC4078
-
-#include <Arduino.h>
-#include "SoftwareSPI.h"
-
-#include <mcu_interface.h>
-
-uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) {
-  for (uint8_t i = 0; i < 8; i++) {
-    if (spi_speed == 0) {
-      MCUI::gpio_set(mosi_pin, !!(b & 0x80));
-      MCUI::gpio_set(sck_pin, HIGH);
-      b <<= 1;
-      if (miso_pin >= 0 && MCUI::gpio_get(miso_pin)) b |= 1;
-      MCUI::gpio_set(sck_pin, LOW);
-    }
-    else {
-      const uint8_t state = (b & 0x80) ? HIGH : LOW;
-      for (uint8_t j = 0; j < spi_speed; j++)
-        MCUI::gpio_set(mosi_pin, state);
-
-      for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
-        MCUI::gpio_set(sck_pin, HIGH);
-
-      b <<= 1;
-      if (miso_pin >= 0 && MCUI::gpio_get(miso_pin)) b |= 1;
-
-      for (uint8_t j = 0; j < spi_speed; j++)
-        MCUI::gpio_set(sck_pin, LOW);
-    }
-  }
-  return b;
-}
-
-void swSpiBegin(const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) {
-  pinMode(sck_pin, OUTPUT);
-  if (MCUI::pin_is_valid(miso_pin)) pinMode(miso_pin, INPUT);
-  pinMode(mosi_pin, OUTPUT);
-}
-
-uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin) {
-  MCUI::gpio_set(mosi_pin, HIGH);
-  MCUI::gpio_set(sck_pin, LOW);
-  return (SystemCoreClock == 120000000 ? 44 : 38) / std::pow(2, 6 - std::min(spiRate, (uint8_t)6));
-}
-
-#endif // TARGET_LPC4078
@@ -1,5 +0,0 @@
-#include <mcu_interface.h>
-
-uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin);
-void swSpiBegin(const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin);
-uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin);
@@ -1,116 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-/**
- * Emulate EEPROM storage using Flash Memory
- *
- * Use a single 32K flash sector to store EEPROM data. To reduce the
- * number of erase operations a simple "leveling" scheme is used that
- * maintains a number of EEPROM "slots" within the larger flash sector.
- * Each slot is used in turn and the entire sector is only erased when all
- * slots have been used.
- *
- * A simple RAM image is used to hold the EEPROM data during I/O operations
- * and this is flushed to the next available slot when an update is complete.
- * If RAM usage becomes an issue we could store this image in one of the two
- * 16Kb I/O buffers (intended to hold DMA USB and Ethernet data, but currently
- * unused).
- */
-#include "../../inc/MarlinConfig.h"
-
-#include "../shared/eeprom_api.h"
-
-//#include <cstdio>
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE 4032 // 4KB
-#endif
-
-size_t PersistentStore::capacity() { return 4032; }
-
-constexpr uint32_t page_size = MCUI::EEPROM::page_size;
-uint32_t buffered_page = 0;
-uint8_t page_buffer[page_size];
-bool buffered_page_dirty = false;
-
-bool PersistentStore::access_start() {
-  MCUI::EEPROM::init();
-  MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  if (buffered_page_dirty) {
-    MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-  }
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint32_t address = pos;
-  //printf("Marlin::eeprom::write(pos = %d, size = %d)\n", pos, size);
-  uint32_t value_index = 0;
-  for (uint32_t addr = address; addr < address + size; ++addr) {
-    uint32_t page_address = addr & 0xFFFFFFC0;
-    if (page_address != buffered_page) {
-      //printf("Marlin::eeprom::write(@%ld):: page change new(%ld) != current(%d)\n",addr, page_address, buffered_page);
-      if (buffered_page_dirty == true) MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-      buffered_page = page_address;
-      buffered_page_dirty = false;
-      MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-    }
-    page_buffer[addr & ~0xFFFFFFC0] = value[value_index++];
-    buffered_page_dirty = true;
-  }
-
-  pos += size;
-  crc16(crc, value, size);
-
-  return false;  // return true for any error
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  uint32_t address = pos;
-  //printf("Marlin::eeprom::read(pos = %d, size = %d, writing = %d)\n", pos, size, writing);
-  uint32_t value_index = 0;
-  for (uint32_t addr = address; addr < address + size; ++addr) {
-    uint32_t page_address = addr & 0xFFFFFFC0;
-    if (page_address != buffered_page) {
-      if (buffered_page_dirty) {
-        MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-        buffered_page_dirty = false;
-      }
-      buffered_page = page_address;
-      MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-    }
-    if (writing) value[value_index++] = page_buffer[addr & ~0xFFFFFFC0];
-    else crc16(crc, &page_buffer[addr & ~0xFFFFFFC0], 1);
-  }
-
-  if (writing) crc16(crc, value, size);
-  pos += size;
-
-  return false;  // return true for any error
-}
-
-#endif // TARGET_LPC4078
@@ -1,191 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Endstop Interrupts
- *
- * Without endstop interrupts the endstop pins must be polled continually in
- * the temperature-ISR via endstops.update(), most of the time finding no change.
- * With this feature endstops.update() is called only when we know that at
- * least one endstop has changed state, saving valuable CPU cycles.
- *
- * This feature only works when all used endstop pins can generate an 'external interrupt'.
- *
- * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
- * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
- */
-
-#include "../../module/endstops.h"
-
-// One ISR for all EXT-Interrupts
-void endstop_ISR() { endstops.update(); }
-
-void setup_endstop_interrupts() {
-  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #define LPC1768_PIN_INTERRUPT_M(pin) ((pin >> 0x5 & 0x7) == 0 || (pin >> 0x5 & 0x7) == 2)
-
-  #if HAS_X_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
-      #error "X_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(X_MAX_PIN);
-  #endif
-  #if HAS_X_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN)
-      #error "X_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(X_MIN_PIN);
-  #endif
-  #if HAS_Y_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN)
-      #error "Y_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Y_MAX_PIN);
-  #endif
-  #if HAS_Y_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN)
-      #error "Y_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Y_MIN_PIN);
-  #endif
-  #if HAS_Z_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN)
-      #error "Z_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z_MAX_PIN);
-  #endif
-  #if HAS_Z_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
-      #error "Z_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-     _ATTACH(Z_MIN_PIN);
-  #endif
-  #if HAS_Z2_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
-      #error "Z2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z2_MAX_PIN);
-  #endif
-  #if HAS_Z2_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN)
-      #error "Z2_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z2_MIN_PIN);
-  #endif
-  #if HAS_Z3_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z3_MAX_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z3_MAX_PIN);
-  #endif
-  #if HAS_Z3_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z3_MIN_PIN);
-  #endif
-  #if HAS_Z4_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z4_MAX_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z4_MAX_PIN);
-  #endif
-  #if HAS_Z4_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z4_MIN_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z4_MIN_PIN);
-  #endif
-  #if HAS_Z_MIN_PROBE_PIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN)
-      #error "Z_MIN_PROBE_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z_MIN_PROBE_PIN);
-  #endif
-  #if HAS_I_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
-      #error "I_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(I_MAX_PIN);
-  #elif HAS_I_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(I_MIN_PIN)
-      #error "I_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(I_MIN_PIN);
-  #endif
-  #if HAS_J_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(J_MAX_PIN)
-      #error "J_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(J_MAX_PIN);
-  #elif HAS_J_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(J_MIN_PIN)
-      #error "J_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(J_MIN_PIN);
-  #endif
-  #if HAS_K_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(K_MAX_PIN)
-      #error "K_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(K_MAX_PIN);
-  #elif HAS_K_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(K_MIN_PIN)
-      #error "K_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(K_MIN_PIN);
-  #endif
-  #if HAS_U_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(U_MAX_PIN)
-      #error "U_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(U_MAX_PIN);
-  #elif HAS_U_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(U_MIN_PIN)
-      #error "U_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(U_MIN_PIN);
-  #endif
-  #if HAS_V_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(V_MAX_PIN)
-      #error "V_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(V_MAX_PIN);
-  #elif HAS_V_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(V_MIN_PIN)
-      #error "V_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(V_MIN_PIN);
-  #endif
-  #if HAS_W_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(W_MAX_PIN)
-      #error "W_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(W_MAX_PIN);
-  #elif HAS_W_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(W_MIN_PIN)
-      #error "W_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(W_MIN_PIN);
-  #endif
-}
@@ -1,120 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Fast I/O Routines for LPC1768/9
- * Use direct port manipulation to save scads of processor time.
- * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
- */
-
-/**
- * Description: Fast IO functions LPC1768
- *
- * For TARGET LPC1768
- */
-
-#include "../shared/Marduino.h"
-#include <mcu_interface.h>
-
-#define PWM_PIN(P)            true // all pins are software PWM capable
-
-#define LPC_PIN(pin)          MCUI::gpio_pin(pin)
-#define LPC_GPIO(port)        MCUI::gpio_port(port)
-
-#define SET_DIR_INPUT(IO)     MCUI::gpio_set_input(IO)
-#define SET_DIR_OUTPUT(IO)    MCUI::gpio_set_output(IO)
-
-#define SET_MODE(IO, mode)    pinMode(IO, mode)
-
-#define WRITE_PIN_SET(IO)     MCUI::gpio_set(IO)
-#define WRITE_PIN_CLR(IO)     MCUI::gpio_clear(IO)
-
-#define READ_PIN(IO)          MCUI::gpio_get(IO)
-#define WRITE_PIN(IO,V)       MCUI::gpio_set(IO, V)
-
-/**
- * Magic I/O routines
- *
- * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
- *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
- */
-
-/// Read a pin
-#define _READ(IO)             READ_PIN(IO)
-
-/// Write to a pin
-#define _WRITE(IO,V)          WRITE_PIN(IO,V)
-
-/// toggle a pin
-#define _TOGGLE(IO)           MCUI::gpio_toggle(IO)
-
-/// set pin as input
-#define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
-
-/// set pin as output
-#define _SET_OUTPUT(IO)       SET_DIR_OUTPUT(IO)
-
-/// set pin as input with pullup mode
-#define _PULLUP(IO,V)         pinMode(IO, (V) ? INPUT_PULLUP : INPUT)
-
-/// set pin as input with pulldown mode
-#define _PULLDOWN(IO,V)       pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
-
-/// check if pin is an input
-#define _IS_INPUT(IO)         (!MCUI::gpio_get_dir(IO))
-
-/// check if pin is an output
-#define _IS_OUTPUT(IO)        (MCUI::gpio_get_dir(IO))
-
-/// Read a pin wrapper
-#define READ(IO)              _READ(IO)
-
-/// Write to a pin wrapper
-#define WRITE(IO,V)           _WRITE(IO,V)
-
-/// toggle a pin wrapper
-#define TOGGLE(IO)            _TOGGLE(IO)
-
-/// set pin as input wrapper
-#define SET_INPUT(IO)         _SET_INPUT(IO)
-/// set pin as input with pullup wrapper
-#define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
-/// set pin as input with pulldown wrapper
-#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0)
-/// set pin as output wrapper  -  reads the pin and sets the output to that value
-#define SET_OUTPUT(IO)        do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0)
-// set pin as PWM
-#define SET_PWM               SET_OUTPUT
-
-/// check if pin is an input wrapper
-#define IS_INPUT(IO)          _IS_INPUT(IO)
-/// check if pin is an output wrapper
-#define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
-
-// Shorthand
-#define OUT_WRITE(IO,V)       do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
-
-// digitalRead/Write wrappers
-#define extDigitalRead(IO)    digitalRead(IO)
-#define extDigitalWrite(IO,V) digitalWrite(IO,V)
@@ -1,276 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// #if PIO_PLATFORM_VERSION < 1001
-//   #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
-// #endif
-// #if PIO_FRAMEWORK_VERSION < 2006
-//   #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
-// #endif
-
-/**
- * Detect an old pins file by checking for old ADC pins values.
- */
-#define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && !WITHIN(_CAT(P,_PIN), TERN(LPC1768_IS_SKRV1_3, 0, 2), 3)  // Include P0_00 and P0_01 for SKR V1.3 board
-#if _OLD_TEMP_PIN(TEMP_BED)
-  #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_0)
-  #error "TEMP_0_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_1)
-  #error "TEMP_1_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_2)
-  #error "TEMP_2_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_3)
-  #error "TEMP_3_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_4)
-  #error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_5)
-  #error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_6)
-  #error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_7)
-  #error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#endif
-#undef _OLD_TEMP_PIN
-
-/**
- * Because PWM hardware channels all share the same frequency, along with the
- * fallback software channels, FAST_PWM_FAN is incompatible with Servos.
- */
-static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards.");
-
-#if SPINDLE_LASER_FREQUENCY
-  static_assert(!NUM_SERVOS, "BLTOUCH and Servos are incompatible with SPINDLE_LASER_FREQUENCY on LPC176x boards.");
-#endif
-
-/**
- * Test LPC176x-specific configuration values for errors at compile-time.
- */
-
-//#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
-//  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
-//#endif
-
-#if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
-  #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
-    #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
-  #endif
-#endif
-
-static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported on LPC176x.");
-
-/**
- * Flag any serial port conflicts
- *
- *   Port  |  TX   |  RX   |
- *    ---  |  ---  |  ---  |
- * Serial  | P0_02 | P0_03 |
- * Serial1 | P0_15 | P0_16 |
- * Serial2 | P0_10 | P0_11 |
- * Serial3 | P0_00 | P0_01 |
- */
-#define ANY_TX(N,V...) DO(IS_TX##N,||,V)
-#define ANY_RX(N,V...) DO(IS_RX##N,||,V)
-
-#if USING_HW_SERIAL0
-  #define IS_TX0(P) (P == P0_02)
-  #define IS_RX0(P) (P == P0_03)
-  #if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
-    #error "Serial port pins (0) conflict with Trinamic SPI pins!"
-  #elif HAS_PRUSA_MMU1 && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN))
-    #error "Serial port pins (0) conflict with Multi-Material-Unit multiplexer pins!"
-  #elif (AXIS_HAS_SPI(X) && IS_TX0(X_CS_PIN)) || (AXIS_HAS_SPI(Y) && IS_RX0(Y_CS_PIN))
-    #error "Serial port pins (0) conflict with X/Y axis SPI pins!"
-  #endif
-  #undef IS_TX0
-  #undef IS_RX0
-#endif
-
-#if USING_HW_SERIAL1
-  #define IS_TX1(P) (P == P0_15)
-  #define IS_RX1(P) (P == P0_16)
-  #define _IS_TX1_1 IS_TX1
-  #define _IS_RX1_1 IS_RX1
-  #if IS_TX1(TMC_SW_SCK)
-    #error "Serial port pins (1) conflict with other pins!"
-  #elif HAS_ROTARY_ENCODER
-    #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
-      #error "Serial port pins (1) conflict with Encoder Buttons!"
-    #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \
-       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
-      #error "Serial port pins (1) conflict with LCD pins!"
-    #endif
-  #endif
-  #undef IS_TX1
-  #undef IS_RX1
-  #undef _IS_TX1_1
-  #undef _IS_RX1_1
-#endif
-
-#if USING_HW_SERIAL2
-  #define IS_TX2(P) (P == P0_10)
-  #define IS_RX2(P) (P == P0_11)
-  #define _IS_TX2_1 IS_TX2
-  #define _IS_RX2_1 IS_RX2
-  #if IS_TX2(X2_ENABLE_PIN) || ANY_RX(2, X2_DIR_PIN, X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
-    #error "Serial port pins (2) conflict with X2 pins!"
-  #elif IS_TX2(Y2_ENABLE_PIN) || ANY_RX(2, Y2_DIR_PIN, Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
-    #error "Serial port pins (2) conflict with Y2 pins!"
-  #elif IS_TX2(Z2_ENABLE_PIN) || ANY_RX(2, Z2_DIR_PIN, Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
-    #error "Serial port pins (2) conflict with Z2 pins!"
-  #elif IS_TX2(Z3_ENABLE_PIN) || ANY_RX(2, Z3_DIR_PIN, Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
-    #error "Serial port pins (2) conflict with Z3 pins!"
-  #elif IS_TX2(Z4_ENABLE_PIN) || ANY_RX(2, Z4_DIR_PIN, Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
-    #error "Serial port pins (2) conflict with Z4 pins!"
-  #elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
-    #error "Serial port pins (2) conflict with other pins!"
-  #elif Y_HOME_TO_MIN && IS_TX2(Y_STOP_PIN)
-    #error "Serial port pins (2) conflict with Y endstop pin!"
-  #elif USES_Z_MIN_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
-    #error "Serial port pins (2) conflict with probe pin!"
-  #elif ANY_TX(2, X_ENABLE_PIN, Y_ENABLE_PIN) || ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
-    #error "Serial port pins (2) conflict with X/Y stepper pins!"
-  #elif HAS_MULTI_EXTRUDER && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
-    #error "Serial port pins (2) conflict with E1 stepper pins!"
-  #elif EXTRUDERS && ANY_RX(2, E0_DIR_PIN, E0_STEP_PIN)
-    #error "Serial port pins (2) conflict with E stepper pins!"
-  #endif
-  #undef IS_TX2
-  #undef IS_RX2
-  #undef _IS_TX2_1
-  #undef _IS_RX2_1
-#endif
-
-#if USING_HW_SERIAL3
-  #define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
-  #define PIN_IS_RX3(P) (P##_PIN == P0_01)
-  #if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
-    #error "Serial port pins (3) conflict with X endstop pins!"
-  #elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) || PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
-    #error "Serial port pins (3) conflict with X/Y axis UART pins!"
-  #elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP)
-    #error "Serial port pins (3) conflict with X2 pins!"
-  #elif PIN_IS_TX3(Y2_DIR) || PIN_IS_RX3(Y2_STEP)
-    #error "Serial port pins (3) conflict with Y2 pins!"
-  #elif PIN_IS_TX3(Z2_DIR) || PIN_IS_RX3(Z2_STEP)
-    #error "Serial port pins (3) conflict with Z2 pins!"
-  #elif PIN_IS_TX3(Z3_DIR) || PIN_IS_RX3(Z3_STEP)
-    #error "Serial port pins (3) conflict with Z3 pins!"
-  #elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP)
-    #error "Serial port pins (3) conflict with Z4 pins!"
-  #elif HAS_MULTI_EXTRUDER && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
-    #error "Serial port pins (3) conflict with E1 pins!"
-  #endif
-  #undef PIN_IS_TX3
-  #undef PIN_IS_RX3
-#endif
-
-#undef ANY_TX
-#undef ANY_RX
-
-//
-// Flag any i2c pin conflicts
-//
-#if ANY(HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
-  #define USEDI2CDEV_M 1  // <Arduino>/Wire.cpp
-
-  #if USEDI2CDEV_M == 0         // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)
-    #define PIN_IS_SDA0(P) (P##_PIN == P0_27)
-    #define IS_SCL0(P)     (P == P0_28)
-    #if ENABLED(SDSUPPORT) && PIN_IS_SDA0(SD_DETECT)
-      #error "SDA0 overlaps with SD_DETECT_PIN!"
-    #elif PIN_IS_SDA0(E0_AUTO_FAN)
-      #error "SDA0 overlaps with E0_AUTO_FAN_PIN!"
-    #elif PIN_IS_SDA0(BEEPER)
-      #error "SDA0 overlaps with BEEPER_PIN!"
-    #elif IS_SCL0(BTN_ENC)
-      #error "SCL0 overlaps with Encoder Button!"
-    #elif IS_SCL0(SD_SS_PIN)
-      #error "SCL0 overlaps with SD_SS_PIN!"
-    #elif IS_SCL0(LCD_SDSS)
-      #error "SCL0 overlaps with LCD_SDSS!"
-    #endif
-    #undef PIN_IS_SDA0
-    #undef IS_SCL0
-  #elif USEDI2CDEV_M == 1       // P0_00 [D20] (SCA) ............ P0_01 [D21] (SCL)
-    #define PIN_IS_SDA1(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
-    #define PIN_IS_SCL1(P) (P##_PIN == P0_01)
-    #if PIN_IS_SDA1(X_MIN) || PIN_IS_SCL1(X_MAX)
-      #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(X2_DIR) || PIN_IS_SCL1(X2_STEP)
-      #error "One or more i2c (1) pins overlaps with X2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Y2_DIR) || PIN_IS_SCL1(Y2_STEP)
-      #error "One or more i2c (1) pins overlaps with Y2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z2_DIR) || PIN_IS_SCL1(Z2_STEP)
-      #error "One or more i2c (1) pins overlaps with Z2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z3_DIR) || PIN_IS_SCL1(Z3_STEP)
-      #error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP)
-      #error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
-      #error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals."
-    #endif
-    #undef PIN_IS_SDA1
-    #undef PIN_IS_SCL1
-  #elif USEDI2CDEV_M == 2     // P0_10 [D38] (X_ENABLE_PIN) ... P0_11 [D55] (X_DIR_PIN)
-    #define PIN_IS_SDA2(P) (P##_PIN == P0_10)
-    #define PIN_IS_SCL2(P) (P##_PIN == P0_11)
-    #if PIN_IS_SDA2(Y_STOP)
-      #error "i2c SDA2 overlaps with Y endstop pin!"
-    #elif USES_Z_MIN_PROBE_PIN && PIN_IS_SDA2(Z_MIN_PROBE)
-      #error "i2c SDA2 overlaps with Z probe pin!"
-    #elif PIN_IS_SDA2(X_ENABLE) || PIN_IS_SDA2(Y_ENABLE)
-      #error "i2c SDA2 overlaps with X/Y ENABLE pin!"
-    #elif AXIS_HAS_SPI(X) && PIN_IS_SDA2(X_CS)
-      #error "i2c SDA2 overlaps with X CS pin!"
-    #elif PIN_IS_SDA2(X2_ENABLE)
-      #error "i2c SDA2 overlaps with X2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Y2_ENABLE)
-      #error "i2c SDA2 overlaps with Y2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z2_ENABLE)
-      #error "i2c SDA2 overlaps with Z2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z3_ENABLE)
-      #error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z4_ENABLE)
-      #error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && PIN_IS_SDA2(E1_ENABLE)
-      #error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
-      #error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals."
-    #elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR))
-      #error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(X_DIR) || PIN_IS_SDA2(Y_DIR)
-      #error "One or more i2c pins overlaps with X/Y DIR pin! Disable i2c peripherals."
-    #endif
-    #undef PIN_IS_SDA2
-    #undef PIN_IS_SCL2
-  #endif
-
-  #undef USEDI2CDEV_M
-#endif
-
-#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-  #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on LPC176x."
-#elif ENABLED(SERIAL_STATS_DROPPED_RX)
-  #error "SERIAL_STATS_DROPPED_RX is not supported on LPX176x."
-#endif
--- a/Show More
+++ b/Show More