etc

reuse, update lcd_preheat
misc
2025-03-17 21:00:23 -05:00 · 2025-03-17 20:29:54 -05:00 · 2025-03-17 20:10:00 -05:00 · 2025-03-17 20:04:33 -05:00 · 2025-03-17 20:00:16 -05:00 · 2025-03-18 00:28:49 +00:00
976 changed files with 34580 additions and 61419 deletions
@@ -0,0 +1,21 @@
+# Build artifacts
+buildroot/
+*.o
+*.a
+*.so
+*.dylib
+*.dll
+*.exe
+
+# Web assets
+*.min.js
+*.min.css
+
+# Generated files
+__pycache__/
+*.pyc
+.DS_Store
+
+# IDE files
+.vscode/
+.idea/
@@ -14,7 +14,7 @@ jobs:
  autolabel:
    name: Auto Label
    if: github.repository == 'MarlinFirmware/Marlin'
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
    steps:
    - name: Auto Label for [BUG]
      uses: actions/github-script@v7
@@ -14,7 +14,7 @@ jobs:
    name: Bump Distribution Date
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:

@@ -18,7 +18,7 @@ jobs:
    name: PR Bad Target
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: superbrothers/close-pull-request@v3
@@ -34,13 +34,16 @@ jobs:
    name: Build Test
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    strategy:
      fail-fast: true
      matrix:
        test-platform:

+        # RP2040
+        - SKR_Pico
+
        # Native
        - linux_native
        - simulator_linux_release
@@ -110,7 +113,7 @@ jobs:
        - BTT_GTR_V1_0
        - BTT_SKR_PRO
        - FLYF407ZG
-        - FYSETC_S6
+        - STM32F446VE_fysetc
        - LERDGEK
        - LERDGEX
        - mks_robin_pro2
@@ -185,6 +188,7 @@ jobs:

    - name: Install Simulator dependencies
      run: |
+        sudo apt-get update
        sudo apt-get install build-essential
        sudo apt-get install libsdl2-dev
        sudo apt-get install libsdl2-net-dev
@@ -36,7 +36,7 @@ jobs:
    # pulls them into additional branches.
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - name: Check out the PR
@@ -0,0 +1,48 @@
+#
+# ci-validate-boards.yml
+# Validate boards.h to make sure it's all set up correctly
+#
+
+name: CI - Validate boards.h
+
+# We can do the on: section as two items, one for pull requests and one for pushes...
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+  push:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+
+jobs:
+  validate_pins_files:
+    name: Validate boards.h
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-22.04
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Validate core/boards.h
+      run: |
+        make validate-boards -j
@@ -26,7 +26,7 @@ jobs:
    name: Validate Pins Files
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - name: Check out the PR
@@ -13,7 +13,7 @@ on:

 jobs:
  remove_label:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    strategy:
      matrix:
@@ -14,7 +14,7 @@ jobs:
    name: Close Stale Issues
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: actions/stale@v9
@@ -14,7 +14,7 @@ jobs:
    name: Lock Closed Issues
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: dessant/lock-threads@v5
@@ -14,7 +14,7 @@ jobs:
    name: Unlock Reopened
    if: github.repository == 'MarlinFirmware/Marlin'

-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04

    steps:
    - uses: OSDKDev/unlock-issues@v1.1
@@ -1,27 +0,0 @@
-#
-# update-base-configs.yml
-# Generate new base config files if needed
-#
-
-name: Update Base Configs
-
-on:
-  schedule:
-    - cron: '0 */6 * * *'
-
-jobs:
-  bump_date:
-    name: Update Base Configs
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-
-    - name: Checkout bugfix-2.1.x
-      uses: actions/checkout@v4
-      with:
-        ref: bugfix-2.1.x
-
-    - name: Update Base Configs
-      run: make base-configs
@@ -169,3 +169,6 @@ __pycache__
 tags
 *.logs
 *.bak
+.aider*
+!.aiderignore
+.env
@@ -0,0 +1,16 @@
+/**
+ * Marlin-specific settings for Zed
+ *
+ * For a full list of overridable settings, and general information on folder-specific settings,
+ * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
+ */
+{
+  "languages": {
+    "C": {
+      "enable_language_server": false
+    },
+    "C++": {
+      "enable_language_server": false
+    }
+  }
+}
@@ -6,10 +6,10 @@ UNIT_TEST_CONFIG ?= default

 help:
 	@echo "Tasks for local development:"
-	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make marlin                    : Build Marlin for the configured board"
 	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
 	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
-	@echo "make base-configs              : Regenerate the base configs in Marlin/src/inc"
+	@echo "make validate-boards -j        : Validate boards.h and pins.h for standards compliance"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
@@ -104,8 +104,10 @@ validate-pins: format-pins
 	@echo "Validating pins files"
 	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)

-base-configs:
-	@echo "Generating base configs"
-	@python $(SCRIPTS_DIR)/makeBaseConfigs.py 2>/dev/null \
-	  && git add Marlin/src/inc/BaseConfiguration.h Marlin/src/inc/BaseConfiguration_adv.h \
-	  && git commit -m "[cron] Update Base Configurations"
+BOARDS_FILE := Marlin/src/core/boards.h
+
+.PHONY: validate-boards
+
+validate-boards:
+	@echo "Validating boards.h file"
+	@python $(SCRIPTS_DIR)/validate_boards.py $(BOARDS_FILE) || (echo "\nError: boards.h file is not valid. Please check and correct it.\n" && exit 1)
@@ -61,7 +61,7 @@
 // @section info

 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Original author or contributor.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)

 // @section machine
@@ -71,6 +71,8 @@
  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif

+// @section serial
+
 /**
 * Select the serial port on the board to use for communication with the host.
 * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -127,6 +129,7 @@

 // Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
+//#define CONFIGURABLE_MACHINE_NAME // Add G-code M550 to set/report the machine name

 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -584,7 +587,7 @@
 #define DUMMY_THERMISTOR_998_VALUE  25
 #define DUMMY_THERMISTOR_999_VALUE 100

-// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
+// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 / 2 / BED
 #if TEMP_SENSOR_IS_MAX_TC(0)
  #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
  #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
@@ -597,6 +600,10 @@
  #define MAX31865_SENSOR_OHMS_2      100
  #define MAX31865_CALIBRATION_OHMS_2 430
 #endif
+#if TEMP_SENSOR_IS_MAX_TC(BED)
+  #define MAX31865_SENSOR_OHMS_BED      100
+  #define MAX31865_CALIBRATION_OHMS_BED 430
+#endif

 #if HAS_E_TEMP_SENSOR
  #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
@@ -689,6 +696,7 @@
 #define PID_K1     0.95   // Smoothing factor within any PID loop

 #if ENABLED(PIDTEMP)
+  //#define MIN_POWER 0
  //#define PID_DEBUG             // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
  //#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
                                  // Set/get with G-code: M301 E[extruder number, 0-2]
@@ -802,6 +810,40 @@
  //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif

+/**
+ * Peltier Bed - Heating and Cooling
+ *
+ * A Peltier device transfers heat from one side to the other in proportion to the amount of
+ * current flowing through the device and the direction of current flow. So the same device
+ * can both heat and cool.
+ *
+ * When "cooling" in addition to rejecting the heat transferred from the hot side to the cold
+ * side, the dissipated power (voltage * current) must also be rejected. Be sure to set up a
+ * fan that can be powered in sync with the Peltier unit.
+ *
+ * This feature is only set up to run in bang-bang mode because Peltiers don't handle PWM
+ * well without filter circuitry.
+ *
+ * Since existing 3D printers are made to handle relatively high current for the heated bed,
+ * we can use the heated bed power pins to control the Peltier power using the same G-codes
+ * as the heated bed (M140, M190, etc.).
+ *
+ * A second GPIO pin is required to control current direction.
+ * Two configurations are possible: Relay and H-Bridge
+ *
+ * (At this time only relay is supported. H-bridge requires 4 MOS switches configured in H-Bridge.)
+ *
+ * Power is handled by the bang-bang control loop: 0 or 255.
+ * Cooling applications are more common than heating, so the pin states are commonly:
+ *   LOW  = Heating = Relay Energized
+ *   HIGH = Cooling = Relay in "Normal" state
+ */
+//#define PELTIER_BED
+#if ENABLED(PELTIER_BED)
+  #define PELTIER_DIR_PIN           -1  // Relay control pin for Peltier
+  #define PELTIER_DIR_HEAT_STATE   LOW  // The relay pin state that causes the Peltier to heat
+#endif
+
 // Add 'M190 R T' for more gradual M190 R bed cooling.
 //#define BED_ANNEALING_GCODE

@@ -907,7 +949,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================

-// @section machine
+// @section kinematics

 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -931,6 +973,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER

+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1117,15 +1168,6 @@
  #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif

-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -1471,7 +1513,6 @@
 * For information about this sensor https://github.com/bigtreetech/MicroProbe
 *
 * Also requires PROBE_ENABLE_DISABLE
- * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
 */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1610,14 +1651,15 @@
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

-// X and Y axis travel speed (mm/min) between probes
-#define XY_PROBE_FEEDRATE (133*60)
+// X and Y axis travel speed between probes.
+// Leave undefined to use the average of the current XY homing feedrate.
+#define XY_PROBE_FEEDRATE    (133*60) // (mm/min)

-// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_FEEDRATE_FAST (4*60)
+// Feedrate for the first approach when double-probing (MULTIPLE_PROBING == 2)
+#define Z_PROBE_FEEDRATE_FAST  (4*60) // (mm/min)

-// Feedrate (mm/min) for the "accurate" probe of each point
-#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
+// Feedrate for the "accurate" probe of each point
+#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) // (mm/min)

 /**
 * Probe Activation Switch
@@ -1679,8 +1721,8 @@
 * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
 * Only integer values >= 1 are valid here.
 *
- * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
- *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
+ * Example: 'M851 Z-5' with a CLEARANCE of 4  =>  9mm from bed to nozzle.
+ *     But: 'M851 Z+1' with a CLEARANCE of 2  =>  2mm from bed to nozzle.
 */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // (mm) Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // (mm) Z Clearance between probe points
@@ -1734,17 +1776,17 @@
 // @section stepper drivers

 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
-#define X_ENABLE_ON 0
-#define Y_ENABLE_ON 0
-#define Z_ENABLE_ON 0
-#define E_ENABLE_ON 0 // For all extruders
-//#define I_ENABLE_ON 0
-//#define J_ENABLE_ON 0
-//#define K_ENABLE_ON 0
-//#define U_ENABLE_ON 0
-//#define V_ENABLE_ON 0
-//#define W_ENABLE_ON 0
+// :['LOW', 'HIGH']
+#define X_ENABLE_ON LOW
+#define Y_ENABLE_ON LOW
+#define Z_ENABLE_ON LOW
+#define E_ENABLE_ON LOW // For all extruders
+//#define I_ENABLE_ON LOW
+//#define J_ENABLE_ON LOW
+//#define K_ENABLE_ON LOW
+//#define U_ENABLE_ON LOW
+//#define V_ENABLE_ON LOW
+//#define W_ENABLE_ON LOW

 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
@@ -2019,9 +2061,9 @@
        //#define FIL_MOTION8_PULLUP
        //#define FIL_MOTION8_PULLDOWN
      #endif
-    #endif
-  #endif
-#endif
+    #endif // FILAMENT_MOTION_SENSOR
+  #endif // FILAMENT_RUNOUT_DISTANCE_MM
+#endif // FILAMENT_RUNOUT_SENSOR

 //===========================================================================
 //=============================== Bed Leveling ==============================
@@ -2067,6 +2109,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING

+/**
+ * Commands to execute at the start of G29 probing,
+ * after switching to the PROBING_TOOL.
+ */
+//#define EVENT_GCODE_BEFORE_G29 "M300 P440 S200"
+
 /**
 * Commands to execute at the end of G29 probing.
 * Useful to retract or move the Z probe out of the way.
@@ -2304,6 +2352,9 @@
 // Homing speeds (linear=mm/min, rotational=°/min)
 #define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }

+// Edit homing feedrates with M210 and MarlinUI menu items
+//#define EDITABLE_HOMING_FEEDRATE
+
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS

@@ -2848,13 +2899,15 @@
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602

-//
-// ANET and Tronxy 20x4 Controller
-//
-//#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
-                                  // This LCD is known to be susceptible to electrical interference
-                                  // which scrambles the display.  Pressing any button clears it up.
-                                  // This is a LCD2004 display with 5 analog buttons.
+/**
+ * ANET and Tronxy 20x4 Controller
+ * LCD2004 display with 5 analog buttons.
+ *
+ * NOTE: Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+ * This LCD is known to be susceptible to electrical interference which
+ * scrambles the display. Press any button to clear it up.
+ */
+//#define ZONESTAR_LCD

 //
 // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
@@ -3131,14 +3184,14 @@
 //
 // Tiny, but very sharp OLED display
 //
-//#define MKS_12864OLED          // Uses the SH1106 controller (default)
+//#define MKS_12864OLED          // Uses the SH1106 controller
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller

 //
 // Zonestar OLED 128×64 Full Graphics Controller
 //
 //#define ZONESTAR_12864LCD           // Graphical (DOGM) with ST7920 controller
-//#define ZONESTAR_12864OLED          // 1.3" OLED with SH1106 controller (default)
+//#define ZONESTAR_12864OLED          // 1.3" OLED with SH1106 controller
 //#define ZONESTAR_12864OLED_SSD1306  // 0.96" OLED with SSD1306 controller

 //
@@ -3244,6 +3297,11 @@
 //
 //#define ANYCUBIC_LCD_VYPER

+//
+// Sovol SV-06 Resistive Touch Screen
+//
+//#define SOVOL_SV06_RTS
+
 //
 // 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028
 //
@@ -3382,7 +3440,7 @@

 #if ENABLED(TFT_COLOR_UI)
  /**
-   * TFT Font for Color_UI. Choose one of the following:
+   * TFT Font for Color UI. Choose one of the following:
   *
   * NOTOSANS  - Default font with anti-aliasing. Supports Latin Extended and non-Latin characters.
   * UNIFONT   - Lightweight font, no anti-aliasing. Supports Latin Extended and non-Latin characters.
@@ -3391,7 +3449,7 @@
  #define TFT_FONT  NOTOSANS

  /**
-   * TFT Theme for Color_UI. Choose one of the following or add a new one to 'Marlin/src/lcd/tft/themes' directory
+   * TFT Theme for Color UI. Choose one of the following or add a new one to 'Marlin/src/lcd/tft/themes' directory
   *
   * BLUE_MARLIN  - Default theme with 'midnight blue' background
   * BLACK_MARLIN - Theme with 'black' background
@@ -3415,6 +3473,8 @@
 *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
 *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
 *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
 */
 //#define TFT_ROTATION TFT_NO_ROTATION

@@ -3465,7 +3525,9 @@
 // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/
 //
 //#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
+#if ENABLED(REPRAPWORLD_KEYPAD)
+  //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
+#endif

 //
 // EasyThreeD ET-4000+ with button input and status LED
@@ -3482,22 +3544,26 @@
 // :[1,2,3,4,5,6,7,8]
 //#define NUM_M106_FANS 1

-// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
-// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
-// is too low, you should also increment SOFT_PWM_SCALE.
+/**
+ * Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
+ * which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+ * is too low, you should also increment SOFT_PWM_SCALE.
+ */
 //#define FAN_SOFT_PWM

-// Incrementing this by 1 will double the software PWM frequency,
-// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
-// However, control resolution will be halved for each increment;
-// at zero value, there are 128 effective control positions.
-// :[0,1,2,3,4,5,6,7]
+/**
+ * Incrementing this by 1 will double the software PWM frequency, affecting heaters, and
+ * the fan if FAN_SOFT_PWM is enabled. However, control resolution will be halved for each
+ * increment; at zero value, there are 128 effective control positions.
+ * :[0,1,2,3,4,5,6,7]
+ */
 #define SOFT_PWM_SCALE 0

-// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
-// be used to mitigate the associated resolution loss. If enabled,
-// some of the PWM cycles are stretched so on average the desired
-// duty cycle is attained.
+/**
+ * If SOFT_PWM_SCALE is set to a value higher than 0, dithering can be used to mitigate the
+ * associated resolution loss. If enabled, some of the PWM cycles are stretched so on average
+ * the desired duty cycle is attained.
+ */
 //#define SOFT_PWM_DITHER

 // @section extras
@@ -3507,9 +3573,11 @@

 // @section lights

-// Temperature status LEDs that display the hotend and bed temperature.
-// If all hotends, bed temperature, and target temperature are under 54C
-// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+/**
+ * Temperature status LEDs that display the hotend and bed temperature.
+ * If all hotends, bed temperature, and target temperature are under 54C
+ * the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+ */
 //#define TEMP_STAT_LEDS

 // Support for BlinkM/CyzRgb
@@ -174,9 +174,10 @@
 * Thermocouple Options — for MAX6675 (-2), MAX31855 (-3), and MAX31865 (-5).
 */
 //#define TEMP_SENSOR_FORCE_HW_SPI                // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus.
-//#define MAX31865_SENSOR_WIRES_0 2               // (2-4) Number of wires for the probe connected to a MAX31865 board.
-//#define MAX31865_SENSOR_WIRES_1 2
-//#define MAX31865_SENSOR_WIRES_2 2
+//#define MAX31865_SENSOR_WIRES_0   2             // (2-4) Number of wires for the probe connected to a MAX31865 board.
+//#define MAX31865_SENSOR_WIRES_1   2
+//#define MAX31865_SENSOR_WIRES_2   2
+//#define MAX31865_SENSOR_WIRES_BED 2

 //#define MAX31865_50HZ_FILTER                    // Use a 50Hz filter instead of the default 60Hz.
 //#define MAX31865_USE_READ_ERROR_DETECTION       // Treat value spikes (20°C delta in under 1s) as read errors.
@@ -188,6 +189,7 @@
 //#define MAX31865_WIRE_OHMS_0              0.95f // For 2-wire, set the wire resistances for more accurate readings.
 //#define MAX31865_WIRE_OHMS_1              0.0f
 //#define MAX31865_WIRE_OHMS_2              0.0f
+//#define MAX31865_WIRE_OHMS_BED            0.0f

 /**
 * Hephestos 2 24V heated bed upgrade kit.
@@ -203,7 +205,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(BED_LIMIT_SWITCHING)
+  #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
    #define BED_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif
@@ -211,18 +213,19 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif

 #if TEMP_SENSOR_CHAMBER
  //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
  //#define HEATER_CHAMBER_INVERTING false
  //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)

+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
  //#define CHAMBER_FAN               // Enable a fan on the chamber
  #if ENABLED(CHAMBER_FAN)
    //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)
@@ -591,6 +594,8 @@
  // Use TEMP_SENSOR_SOC as a trigger for enabling the controller fan
  //#define CONTROLLER_FAN_MIN_SOC_TEMP 40  // (°C) Turn on the fan if the SoC reaches this temperature

+  #define CONTROLLER_FAN_BED_HEATING        // Turn on the fan when heating the bed
+
  //#define CONTROLLER_FAN_EDITABLE         // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
    #define CONTROLLER_FAN_MENU             // Enable the Controller Fan submenu
@@ -1017,7 +1022,7 @@

 #endif // BLTOUCH

-// @section calibration
+// @section calibrate

 /**
 * Z Steppers Auto-Alignment
@@ -1082,9 +1087,11 @@
  #define HOME_AFTER_G34
 #endif

-//
-// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
-//
+/**
+ * Assisted Tramming
+ *
+ * Add the G35 command to measure bed corners and help adjust screws. Requires a bed probe.
+ */
 //#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)

@@ -1105,19 +1112,22 @@
  //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment

  /**
-   * Screw thread:
-   *   M3: 30 = Clockwise, 31 = Counter-Clockwise
-   *   M4: 40 = Clockwise, 41 = Counter-Clockwise
-   *   M5: 50 = Clockwise, 51 = Counter-Clockwise
+   * Screw Thread. Use one of the following defines:
+   *
+   *   M3_CW = M3 Clockwise, M3_CCW = M3 Counter-Clockwise
+   *   M4_CW = M4 Clockwise, M4_CCW = M4 Counter-Clockwise
+   *   M5_CW = M5 Clockwise, M5_CCW = M5 Counter-Clockwise
+   *
+   * :{'M3_CW':'M3 Clockwise','M3_CCW':'M3 Counter-Clockwise','M4_CW':'M4 Clockwise','M4_CCW':'M4 Counter-Clockwise','M5_CW':'M5 Clockwise','M5_CCW':'M5 Counter-Clockwise'}
   */
-  #define TRAMMING_SCREW_THREAD 30
+  #define TRAMMING_SCREW_THREAD M3_CW

 #endif

 // @section motion control

 /**
- * Fixed-time-based Motion Control -- EXPERIMENTAL
+ * Fixed-time-based Motion Control -- BETA FEATURE
 * Enable/disable and set parameters with G-code M493.
 * See ft_types.h for named values used by FTM options.
 */
@@ -1130,7 +1140,7 @@
  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
  #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
-  #define FTM_LINEAR_ADV_DEFAULT_K      0         // Default linear advance gain, integer value. (Acceleration-based scaling factor.)
+  #define FTM_LINEAR_ADV_DEFAULT_K      0.0f      // Default linear advance gain. (Acceleration-based scaling factor.)
  #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
  #define FTM_SHAPING_ZETA_Y            0.1f      // Zeta used by input shapers for Y axis

@@ -1181,7 +1191,7 @@
 #endif

 /**
- * Input Shaping -- EXPERIMENTAL
+ * Input Shaping
 *
 * Zero Vibration (ZV) Input Shaping for X and/or Y movements.
 *
@@ -1253,8 +1263,8 @@
 #define DISABLE_IDLE_E    // Shut down all idle extruders

 // Default Minimum Feedrates for printing and travel moves
-#define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s. °/s for rotational-only moves) Minimum feedrate. Set with M205 S.
-#define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s. °/s for rotational-only moves) Minimum travel feedrate. Set with M205 T.
+#define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s) Minimum feedrate. Set with M205 S.
+#define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s) Minimum travel feedrate. Set with M205 T.

 // Minimum time that a segment needs to take as the buffer gets emptied
 #define DEFAULT_MINSEGMENTTIME        20000   // (µs) Set with M205 B.
@@ -1409,24 +1419,24 @@
 #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]

 /**
- *  @section  stepper motor current
+ * @section stepper motor current
 *
- *  Some boards have a means of setting the stepper motor current via firmware.
+ * Some boards have a means of setting the stepper motor current via firmware.
 *
- *  The power on motor currents are set by:
- *    PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
- *                         known compatible chips: A4982
- *    DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
- *                         known compatible chips: AD5206
- *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
- *                         known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
- *                         known compatible chips: MCP4451, MCP4018
+ * The power on motor currents are set by:
+ *   PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
+ *                        known compatible chips: A4982
+ *   DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
+ *                        known compatible chips: AD5206
+ *   DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
+ *                        known compatible chips: MCP4728
+ *   DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
+ *                        known compatible chips: MCP4451, MCP4018
 *
- *  Motor currents can also be set by M907 - M910 and by the LCD.
- *    M907 - applies to all.
- *    M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
- *    M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
+ * Motor currents can also be set by M907 - M910 and by the LCD.
+ *   M907 - applies to all.
+ *   M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
+ *   M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
 */
 //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 }          // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
@@ -1490,8 +1500,17 @@
  #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif

+/**
+ * Probe Offset Wizard
+ * Add a Probe Z Offset calibration option to the LCD menu.
+ * Use this helper to get a perfect 'M851 Z' probe offset.
+ * When launched this powerful wizard:
+ *  - Measures the bed height at the configured position with the probe.
+ *  - Moves the nozzle to the same position for a "paper" measurement.
+ *  - The difference is used to set the probe Z offset.
+ */
 #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
+  //#define PROBE_OFFSET_WIZARD
  #if ENABLED(PROBE_OFFSET_WIZARD)
    /**
     * Enable to init the Probe Z-Offset when starting the Wizard.
@@ -1508,6 +1527,10 @@
 #if HAS_MARLINUI_MENU

  #if HAS_BED_PROBE
+
+    // Show Deploy / Stow Probe options in the Motion menu.
+    #define PROBE_DEPLOY_STOW_MENU
+
    // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
    //#define X_AXIS_TWIST_COMPENSATION
    #if ENABLED(X_AXIS_TWIST_COMPENSATION)
@@ -1522,14 +1545,13 @@
      #define XATC_Z_OFFSETS { 0, 0, 0 }    // Z offsets for X axis sample points
    #endif

-    // Show Deploy / Stow Probe options in the Motion menu.
-    #define PROBE_DEPLOY_STOW_MENU
  #endif

  // Include a page of printer information in the LCD Main Menu
  //#define LCD_INFO_MENU
  #if ENABLED(LCD_INFO_MENU)
    //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+    //#define BUILD_INFO_MENU_ITEM           // Add a menu item to display the build date and time
  #endif

  /**
@@ -1597,6 +1619,10 @@
  //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
  #define SOUND_ON_DEFAULT    // Buzzer/speaker default enabled state

+  #if ENABLED(U8GLIB_SSD1309)
+    //#define LCD_DOUBLE_BUFFER           // Optimize display updates. Costs ~1K of SRAM.
+  #endif
+
  #if HAS_WIRED_LCD
    //#define DOUBLE_LCD_FRAMERATE        // Not recommended for slow boards.
  #endif
@@ -1848,7 +1874,7 @@
   *
   *    SCLK, MOSI, MISO --> SCLK, MOSI, MISO
   *    INT              --> SD_DETECT_PIN [1]
-   *    SS               --> SDSS
+   *    SS               --> SD_SS_PIN
   *
   * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
   */
@@ -1875,7 +1901,7 @@
    //#define USE_OTG_USB_HOST

    #if DISABLED(USE_OTG_USB_HOST)
-      #define USB_CS_PIN    SDSS
+      #define USB_CS_PIN    SD_SS_PIN
      #define USB_INTR_PIN  SD_DETECT_PIN
    #endif
  #endif
@@ -1986,7 +2012,7 @@
  #if IS_U8GLIB_ST7920
    // Enable this option and reduce the value to optimize screen updates.
    // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
-    //#define DOGM_SPI_DELAY_US 5
+    //#define DOGM_SPI_DELAY_US      5  // (µs) Delay after each SPI transfer

    //#define LIGHTWEIGHT_UI
    #if ENABLED(LIGHTWEIGHT_UI)
@@ -2016,17 +2042,17 @@
  //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
  //#define STATUS_HEAT_POWER         // Show heater output power as a vertical bar

-  // Frivolous Game Options
-  //#define MARLIN_BRICKOUT
-  //#define MARLIN_INVADERS
-  //#define MARLIN_SNAKE
-  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
-
 #endif // HAS_MARLINUI_U8GLIB

 #if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
  #define MENU_HOLLOW_FRAME           // Enable to save many cycles by drawing a hollow frame on Menu Screens
  //#define OVERLAY_GFX_REVERSE       // Swap the CW/CCW indicators in the graphics overlay
+
+  // Frivolous Game Options
+  //#define MARLIN_BRICKOUT
+  //#define MARLIN_INVADERS
+  //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 #endif

 //
@@ -2205,7 +2231,7 @@

  // Developer menu (accessed by touching "About Printer" copyright text)
  //#define TOUCH_UI_DEVELOPER_MENU
-#endif
+#endif // TOUCH_UI_FTDI_EVE

 //
 // Classic UI Options
@@ -2239,7 +2265,7 @@
 // ADC Button Debounce
 //
 #if HAS_ADC_BUTTONS
-  #define ADC_BUTTON_DEBOUNCE_DELAY 16  // Increase if buttons bounce or repeat too fast
+  #define ADC_BUTTON_DEBOUNCE_DELAY 16  // (count) Increase if buttons bounce or repeat too fast
 #endif

 // @section safety
@@ -2280,7 +2306,7 @@

  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
-    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // (ms) Maximum interval between clicks.
                                            // Note: Extra time may be added to mitigate controller latency.
    //#define MOVE_Z_WHEN_IDLE              // Jump to the move Z menu on double-click when printer is idle.
    #if ENABLED(MOVE_Z_WHEN_IDLE)
@@ -2560,7 +2586,7 @@

 /**
 * Minimum stepper driver pulse width (in ns)
- * If undefined, these defaults (from Conditionals_adv.h) apply:
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
 *     100 : Minimum for TMC2xxx stepper drivers
 *     500 : Minimum for LV8729
 *    1000 : Minimum for A4988 and A5984 stepper drivers
@@ -2574,7 +2600,7 @@

 /**
 * Maximum stepping rate (in Hz) the stepper driver allows
- * If undefined, these defaults (from Conditionals_adv.h) apply:
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
 *  5000000 : Maximum for TMC2xxx stepper drivers
 *  1000000 : Maximum for LV8729 stepper driver
 *   500000 : Maximum for A4988 stepper driver
@@ -2612,19 +2638,23 @@
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4

-// Transmission to Host Buffer Size
-// To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
-// To buffer a simple "ok" you need 4 bytes.
-// For ADVANCED_OK (M105) you need 32 bytes.
-// For debug-echo: 128 bytes for the optimal speed.
-// Other output doesn't need to be that speedy.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+/**
+ * Host Transmit Buffer Size
+ *  - Costs 386 bytes of flash and TX_BUFFER_SIZE+3 bytes of SRAM (if not 0).
+ *  - 4 bytes required to buffer a simple "ok".
+ *  - 32 bytes for ADVANCED_OK (M105).
+ *  - 128 bytes for the optimal speed of 'debug-echo:'
+ *  - Other output doesn't need to be that speedy.
+ * :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+ */
 #define TX_BUFFER_SIZE 0

-// Host Receive Buffer Size
-// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
-// To use flow control, set this buffer size to at least 1024 bytes.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+/**
+ * Host Receive Buffer Size
+ * Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+ * To use flow control, set this buffer size to at least 1024 bytes.
+ * :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+ */
 //#define RX_BUFFER_SIZE 1024

 #if RX_BUFFER_SIZE >= 1024
@@ -2708,7 +2738,7 @@

 /**
 * Set the number of proportional font spaces required to fill up a typical character space.
- * This can help to better align the output of commands like `G29 O` Mesh Output.
+ * This can help to better align the output of commands like 'G29 O' Mesh Output.
 *
 * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
 * Otherwise, adjust according to your client and font.
@@ -3891,7 +3921,7 @@
 /**
 * Extra options for the M114 "Current Position" report
 */
-//#define M114_DETAIL         // Use 'M114` for details to check planner calculations
+//#define M114_DETAIL         // Use 'M114 D' for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.

@@ -3938,7 +3968,6 @@
 * Spend 28 bytes of SRAM to optimize the G-code parser
 */
 #define FASTER_GCODE_PARSER
-
 #if ENABLED(FASTER_GCODE_PARSER)
  //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
@@ -4389,93 +4418,56 @@
  //#define E_MUX0_PIN 40  // Always Required
  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
+
 #elif HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3
  // Common settings for MMU2/MMU2S/MMU3
  // Serial port used for communication with MMU2/MMU2S/MMU3.
-  #define MMU2_SERIAL_PORT 2
+  #define MMU_SERIAL_PORT 2
  #define MMU_BAUD 115200

-  // Use hardware reset for MMU if a pin is defined for it
-  //#define MMU2_RST_PIN 23
+  //#define MMU_RST_PIN 23    // Define this pin to use Hardware Reset for MMU2/MMU2S/MMU3

+  //#define MMU_MENUS         // Add an LCD menu for MMU2/MMU2S/MMU3
+
+  //#define MMU_DEBUG         // Write debug info to serial output
+
+  // Options pertaining to MMU2 and MMU2S
  #if HAS_PRUSA_MMU2
    // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
    //#define MMU2_MODE_12V

+    // Settings for filament load / unload from the LCD menu.
+    // This is for Průša MK3-style extruders. Customize for your hardware.
+    #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
+
    // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
    #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
-  #endif

-  // Add an LCD menu for MMU2/MMU2S/MMU3
-  //#define MMU_MENUS
+    // MMU2 sequences use mm/min. Not compatible with MMU3, which use mm/sec.
+    #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
+      {  4.4,  871 }, \
+      { 10.0, 1393 }, \
+      {  4.4,  871 }, \
+      { 10.0,  198 }

-  // Settings for filament load / unload from the LCD menu.
-  // This is for Průša MK3-style extruders. Customize for your hardware.
-  #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
+    #define MMU2_RAMMING_SEQUENCE \
+      {   1.0, 1000 }, \
+      {   1.0, 1500 }, \
+      {   2.0, 2000 }, \
+      {   1.5, 3000 }, \
+      {   2.5, 4000 }, \
+      { -15.0, 5000 }, \
+      { -14.0, 1200 }, \
+      {  -6.0,  600 }, \
+      {  10.0,  700 }, \
+      { -10.0,  400 }, \
+      { -50.0, 2000 }
+
+  #endif // HAS_PRUSA_MMU2

  /**
-   * ------------
-   * MMU2 / MMU2S
-   * ------------
-   * MMU2 sequences use mm/min. Not compatible with MMU3 (see below).
-   * #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
-   *   {  4.4,  871 }, \
-   *   { 10.0, 1393 }, \
-   *   {  4.4,  871 }, \
-   *   { 10.0,  198 }
-   */
-
-  /* #define MMU2_RAMMING_SEQUENCE \
-   *   {   1.0, 1000 }, \
-   *   {   1.0, 1500 }, \
-   *   {   2.0, 2000 }, \
-   *   {   1.5, 3000 }, \
-   *   {   2.5, 4000 }, \
-   *   { -15.0, 5000 }, \
-   *   { -14.0, 1200 }, \
-   *   {  -6.0,  600 }, \
-   *   {  10.0,  700 }, \
-   *   { -10.0,  400 }, \
-   *   { -50.0, 2000 }
-   */
-
-  /**
-   * ----
-   * MMU3
-   * ----
-   * These values are compatible with MMU3 as they are defined in mm/s
-   */
-
-  #define MMU2_EXTRUDER_PTFE_LENGTH       42.3 // (mm)
-  #define MMU2_EXTRUDER_HEATBREAK_LENGTH  17.7 // (mm)
-
-  #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
-    { MMU2_EXTRUDER_PTFE_LENGTH,      MMM_TO_MMS(810) }, /* (13.5 mm/s) Fast load ahead of heatbreak */ \
-    { MMU2_EXTRUDER_HEATBREAK_LENGTH, MMM_TO_MMS(198) }  // ( 3.3 mm/s) Slow load after heatbreak
-
-  #define MMU2_RAMMING_SEQUENCE \
-    { 0.2816,  MMM_TO_MMS(1339.0) }, \
-    { 0.3051,  MMM_TO_MMS(1451.0) }, \
-    { 0.3453,  MMM_TO_MMS(1642.0) }, \
-    { 0.3990,  MMM_TO_MMS(1897.0) }, \
-    { 0.4761,  MMM_TO_MMS(2264.0) }, \
-    { 0.5767,  MMM_TO_MMS(2742.0) }, \
-    { 0.5691,  MMM_TO_MMS(3220.0) }, \
-    { 0.1081,  MMM_TO_MMS(3220.0) }, \
-    { 0.7644,  MMM_TO_MMS(3635.0) }, \
-    { 0.8248,  MMM_TO_MMS(3921.0) }, \
-    { 0.8483,  MMM_TO_MMS(4033.0) }, \
-    { -15.0,   MMM_TO_MMS(6000.0) }, \
-    { -24.5,   MMM_TO_MMS(1200.0) }, \
-    {  -7.0,   MMM_TO_MMS( 600.0) }, \
-    {  -3.5,   MMM_TO_MMS( 360.0) }, \
-    {  20.0,   MMM_TO_MMS( 454.0) }, \
-    { -20.0,   MMM_TO_MMS( 303.0) }, \
-    { -35.0,   MMM_TO_MMS(2000.0) }
-
-  /**
-   * Using a sensor like the MMU2S
-   * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S.
+   * Options pertaining to MMU2S devices
+   * Requires the MK3S extruder with a sensor at the extruder idler, like the MMU2S.
   * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11
   */
  #if HAS_PRUSA_MMU2S
@@ -4516,14 +4508,9 @@

    // MMU3 settings

-    #define MMU2_MAX_RETRIES 3  // Number of retries (total time = timeout*retries)
+    #define MMU3_HAS_CUTTER     // Enable cutter related functionality

-    // Nominal distance from the extruder gear to the nozzle tip is 87mm
-    // However, some slipping may occur and we need separate distances for
-    // LoadToNozzle and ToolChange.
-    // - +5mm seemed good for LoadToNozzle,
-    // - but too much (made blobs) for a ToolChange
-    #define MMU2_LOAD_TO_NOZZLE_LENGTH 87.0 + 5.0
+    #define MMU3_MAX_RETRIES 3  // Number of retries (total time = timeout*retries)

    // As discussed with our PrusaSlicer profile specialist
    // - ToolChange shall not try to push filament into the very tip of the nozzle
@@ -4532,28 +4519,26 @@
    // Beware - this value is used to initialize the MMU logic layer - it will be sent to the MMU upon line up (written into its 8bit register 0x0b)
    // However - in the G-code we can get a request to set the extra load distance at runtime to something else (M708 A0xb Xsomething).
    // The printer intercepts such a call and sets its extra load distance to match the new value as well.
-    #define MMU2_FILAMENT_SENSOR_POSITION    0   // (mm)
-    #define MMU2_LOAD_DISTANCE_PAST_GEARS    5   // (mm)
-    #define MMU2_TOOL_CHANGE_LOAD_LENGTH MMU2_FILAMENT_SENSOR_POSITION + MMU2_LOAD_DISTANCE_PAST_GEARS // (mm)
+    #define MMU3_FILAMENT_SENSOR_E_POSITION  0   // (mm)
+    #define _MMU3_LOAD_DISTANCE_PAST_GEARS   5   // (mm)
+    #define MMU3_TOOL_CHANGE_LOAD_LENGTH (MMU3_FILAMENT_SENSOR_E_POSITION + _MMU3_LOAD_DISTANCE_PAST_GEARS) // (mm)

-    #define MMU2_LOAD_TO_NOZZLE_FEED_RATE        20.0 // (mm/s)
-    #define MMU2_UNLOAD_TO_FINDA_FEED_RATE      120.0 // (mm/s)
+    #define MMU3_LOAD_TO_NOZZLE_FEED_RATE        20.0 // (mm/s)

-    #define MMU2_VERIFY_LOAD_TO_NOZZLE_FEED_RATE 50.0 // (mm/s)
-    #define MMU2_VERIFY_LOAD_TO_NOZZLE_TWEAK     -5.0 // (mm) Amount to adjust the length for verifying load-to-nozzle
+    #define MMU3_VERIFY_LOAD_TO_NOZZLE_FEED_RATE 50.0 // (mm/s)
+    #define _MMU3_VERIFY_LOAD_TO_NOZZLE_TWEAK    -5.0 // (mm) Amount to adjust the length for verifying load-to-nozzle

    // The first thing the MMU does is initialize its axis.
    // Meanwhile the E-motor will unload 20mm of filament in about 1 second.
-    #define MMU2_RETRY_UNLOAD_TO_FINDA_LENGTH    80.0 // (mm)
-    #define MMU2_RETRY_UNLOAD_TO_FINDA_FEED_RATE 80.0 // (mm/s)
+    #define MMU3_RETRY_UNLOAD_TO_FINDA_LENGTH    80.0 // (mm)
+    #define MMU3_RETRY_UNLOAD_TO_FINDA_FEED_RATE 80.0 // (mm/s)

    // After loading a new filament, the printer will extrude this length of filament
    // then retract to the original position. This is used to check if the filament sensor
    // reading flickers or filament is jammed.
-    #define MMU2_CHECK_FILAMENT_PRESENCE_EXTRUSION_LENGTH (MMU2_EXTRUDER_PTFE_LENGTH + MMU2_EXTRUDER_HEATBREAK_LENGTH + MMU2_VERIFY_LOAD_TO_NOZZLE_TWEAK + MMU2_FILAMENT_SENSOR_POSITION) // (mm)
-
-    #define MMU_HAS_CUTTER            // Enable cutter related functionalities
-    //#define MMU_FORCE_STEALTH_MODE  // Force stealth mode and disable menu item
+    #define _MMU_EXTRUDER_PTFE_LENGTH            42.3 // (mm)
+    #define _MMU_EXTRUDER_HEATBREAK_LENGTH       17.7 // (mm)
+    #define MMU3_CHECK_FILAMENT_PRESENCE_EXTRUSION_LENGTH (MMU3_FILAMENT_SENSOR_E_POSITION + _MMU_EXTRUDER_PTFE_LENGTH + _MMU_EXTRUDER_HEATBREAK_LENGTH + _MMU3_VERIFY_LOAD_TO_NOZZLE_TWEAK) // (mm)

    /**
     * SpoolJoin Consumes All Filament -- EXPERIMENTAL
@@ -4571,12 +4556,37 @@
     * sensor is triggered through the gears) and the end of the PTFE tube and
     * can cause filament load issues.
     */
-    //#define MMU_SPOOL_JOIN_CONSUMES_ALL_FILAMENT
+    //#define MMU3_SPOOL_JOIN_CONSUMES_ALL_FILAMENT

-  #else
+    // MMU3 sequences use mm/sec. Not compatible with MMU2 which use mm/min.
+    #define MMU3_LOAD_TO_NOZZLE_SEQUENCE \
+      { _MMU_EXTRUDER_PTFE_LENGTH,      MMM_TO_MMS(810) }, /* (13.5 mm/s) Fast load ahead of heatbreak */ \
+      { _MMU_EXTRUDER_HEATBREAK_LENGTH, MMM_TO_MMS(198) }  /* ( 3.3 mm/s) Slow load after heatbreak */
+
+    #define MMU3_RAMMING_SEQUENCE \
+      { 0.2816,  MMM_TO_MMS(1339.0) }, \
+      { 0.3051,  MMM_TO_MMS(1451.0) }, \
+      { 0.3453,  MMM_TO_MMS(1642.0) }, \
+      { 0.3990,  MMM_TO_MMS(1897.0) }, \
+      { 0.4761,  MMM_TO_MMS(2264.0) }, \
+      { 0.5767,  MMM_TO_MMS(2742.0) }, \
+      { 0.5691,  MMM_TO_MMS(3220.0) }, \
+      { 0.1081,  MMM_TO_MMS(3220.0) }, \
+      { 0.7644,  MMM_TO_MMS(3635.0) }, \
+      { 0.8248,  MMM_TO_MMS(3921.0) }, \
+      { 0.8483,  MMM_TO_MMS(4033.0) }, \
+      { -15.0,   MMM_TO_MMS(6000.0) }, \
+      { -24.5,   MMM_TO_MMS(1200.0) }, \
+      {  -7.0,   MMM_TO_MMS( 600.0) }, \
+      {  -3.5,   MMM_TO_MMS( 360.0) }, \
+      {  20.0,   MMM_TO_MMS( 454.0) }, \
+      { -20.0,   MMM_TO_MMS( 303.0) }, \
+      { -35.0,   MMM_TO_MMS(2000.0) }
+
+  #else // MMU2 (not MMU2S)

    /**
-     * MMU1 Extruder Sensor
+     * MMU2 Extruder Sensor
     *
     * Support for a Průša (or other) IR Sensor to detect filament near the extruder
     * and make loading more reliable. Suitable for an extruder equipped with a filament
@@ -4586,15 +4596,13 @@
     * move up to the gears. If no filament is detected, the MMU2 can make some more attempts.
     * If all attempts fail, a filament runout will be triggered.
     */
-    //#define MMU_EXTRUDER_SENSOR
-    #if ENABLED(MMU_EXTRUDER_SENSOR)
-      #define MMU_LOADING_ATTEMPTS_NR 5 // max. number of attempts to load filament if first load fail
+    //#define MMU2_EXTRUDER_SENSOR
+    #if ENABLED(MMU2_EXTRUDER_SENSOR)
+      #define MMU2_LOADING_ATTEMPTS_NR 5  // Number of times to try loading filament before failure
    #endif

  #endif

-  //#define MMU2_DEBUG  // Write debug info to serial output
-
 #endif // HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3

 /**
@@ -187,6 +187,17 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1033)
 # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
 else ifeq ($(HARDWARE_MOTHERBOARD),1034)

+# RAMPS 1.6+ (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1035)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1036)
+# RAMPS 1.6+ (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1037)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1038)
+# RAMPS 1.6+ (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1039)
+
 #
 # RAMPS Derivatives - ATmega1280, ATmega2560
 #
@@ -221,108 +232,113 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# zrib V2.0 (Chinese RAMPS replica)
+# Zonestar zrib V2.0 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# zrib V5.2 (Chinese RAMPS replica)
+# Zonestar zrib V5.2 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# Zonestar zrib V5.3 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
  MCU              ?= atmega1280
  PROG_MCU         ?= m1280
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Raise3D N series Rumba derivative
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
+# Raise3D N series Rumba derivative
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 2 Plus
+# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# MakeBoard Mini v2.1.2 by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.3-based on RAMPS EFB
+# MakeBoard Mini v2.1.2 by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-#   ... Ver 1.4
+# TriGorilla Anycubic version 1.3-based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-#   ... Rev 1.1 (new servo pin order)
+#   ... Ver 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: Ender-4, CR-8
+#   ... Rev 1.1 (new servo pin order)
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# FYSETC F6 1.4
+# Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Wanhao Duplicator i3 Plus
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# VORON Design
+# FYSETC F6 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Tronxy TRONXY-V3-1.0
+# Wanhao Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Z-Bolt X Series
+# VORON Design
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# TT OSCAR
+# Tronxy TRONXY-V3-1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# Overlord/Overlord Pro
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v1
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
+else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
+else ifeq ($(HARDWARE_MOTHERBOARD),1151)
 # MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+else ifeq ($(HARDWARE_MOTHERBOARD),1152)
 # Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+else ifeq ($(HARDWARE_MOTHERBOARD),1153)
 # Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
 # Tenlog D3 Hero IDEX printer
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+# Tenlog D3, D5, D6 IDEX Printer
 else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Tenlog D3,5,6 Pro IDEX printers
-else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1158)
+else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1159)
+else ifeq ($(HARDWARE_MOTHERBOARD),1158)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1160)
+else ifeq ($(HARDWARE_MOTHERBOARD),1159)
 # Longer LK1 PRO / Alfawise U20 Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1161)
+else ifeq ($(HARDWARE_MOTHERBOARD),1160)
 # Longer LKx PRO / Alfawise Uxx Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1162)
-# Zonestar zrib V5.3 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+else ifeq ($(HARDWARE_MOTHERBOARD),1161)
 # Pxmalion Core I3
+else ifeq ($(HARDWARE_MOTHERBOARD),1162)
+# Panowin Cutlass (as found in the Panowin F1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+# Kodama Bardo V1.x (as found in the Kodama Trinus)
 else ifeq ($(HARDWARE_MOTHERBOARD),1164)
+# XTLW MFF V1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1165)
+# XTLW MFF V2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1166)
+

 #
 # RAMBo and derivatives
@@ -340,7 +356,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # abee Scoovo X9H
 else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# Rambo ThinkerV2
+# ThinkerV2
 else ifeq ($(HARDWARE_MOTHERBOARD),1206)

 #
@@ -383,30 +399,40 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1315)
 else ifeq ($(HARDWARE_MOTHERBOARD),1316)
 # Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
 # Geeetech GT2560 Rev B for Mecreator2
+else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+# Geeetech GT2560 Rev B for A20(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Geeetech GT2560 Rev B for A20(M/T/D)
+# Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1320)
-# Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1321)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1322)
-# Leapfrog Xeed 2015
-else ifeq ($(HARDWARE_MOTHERBOARD),1323)
-# PICA Shield (original version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1324)
-# PICA Shield (rev C or later)
-else ifeq ($(HARDWARE_MOTHERBOARD),1325)
-# Intamsys 4.0 (Funmat HT)
-else ifeq ($(HARDWARE_MOTHERBOARD),1326)
-# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
-else ifeq ($(HARDWARE_MOTHERBOARD),1327)
 # Geeetech GT2560 Rev B for A20(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1321)
+# Einstart retrofit
+else ifeq ($(HARDWARE_MOTHERBOARD),1322)
+# Wanhao 0ne+ i3 Mini
+else ifeq ($(HARDWARE_MOTHERBOARD),1323)
+# Overlord/Overlord Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1324)
+# ADIMLab Gantry v1
+else ifeq ($(HARDWARE_MOTHERBOARD),1325)
+# ADIMLab Gantry v2
+else ifeq ($(HARDWARE_MOTHERBOARD),1326)
+# Leapfrog Xeed 2015
+else ifeq ($(HARDWARE_MOTHERBOARD),1327)
+# PICA Shield (original version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1328)
-# Mega controller & Protoneer CNC Shield V3.00
+# PICA Shield (rev C or later)
 else ifeq ($(HARDWARE_MOTHERBOARD),1329)
+# Intamsys 4.0 (Funmat HT)
+else ifeq ($(HARDWARE_MOTHERBOARD),1330)
+# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
+else ifeq ($(HARDWARE_MOTHERBOARD),1331)
+# Mega controller & Protoneer CNC Shield V3.00
+else ifeq ($(HARDWARE_MOTHERBOARD),1332)
+# WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
+else ifeq ($(HARDWARE_MOTHERBOARD),1333)
+# Geeetech GT2560 V4.1B for A10(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1334)

 #
 # ATmega1281, ATmega2561
@@ -440,7 +466,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1502)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
  PROG_MCU         ?= m644p
-# Melzi V2.0
+# Melzi V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
@@ -450,36 +476,41 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1504)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Creality3D board (for CR-10 etc)
+# Melzi Creality3D (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Malyan M150 board
+# Melzi Creality3D (for Ender-2)
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Tronxy X5S
+# Melzi Malyan M150
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# STB V1.1
+# Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Azteeg X1
+# STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Anet 1.0 (Melzi clone)
+# Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1510)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),1511)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # ZoneStar ZMIB V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1511)
  HARDWARE_VARIANT ?= Sanguino
@@ -995,7 +1026,7 @@ extcoff: $(TARGET).elf
 	$(NM) -n $< > $@

 # Link: create ELF output file from library.
-
+LDFLAGS+= -Wl,-V
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
 	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
@@ -41,7 +41,14 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-08-29"
+//#define STRING_DISTRIBUTION_DATE "2025-03-18"
+
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"

 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
 */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000
@@ -62,6 +62,11 @@ motherboard                              = BOARD_RAMPS_14_EFB
 serial_port                              = 0
 baudrate                                 = 250000

+string_config_h_author                   = "(default from config.ini)"
+
+capabilities_report                      = on
+extended_capabilities_report             = on
+
 use_watchdog                             = on
 thermal_protection_hotends               = on
 thermal_protection_hysteresis            = 4
@@ -77,9 +82,7 @@ temp_sensor_0                            = 1
 temp_hysteresis                          = 3
 heater_0_mintemp                         = 5
 heater_0_maxtemp                         = 275
-preheat_1_temp_hotend                    = 180

-bang_max                                 = 255
 pidtemp                                  = on
 pid_k1                                   = 0.95
 pid_max                                  = 255
@@ -89,6 +92,14 @@ default_kp                               = 22.20
 default_ki                               = 1.08
 default_kd                               = 114.00

+temp_sensor_bed                          = 1
+bed_mintemp                              = 5
+bed_maxtemp                              = 150
+
+thermal_protection_bed                   = on
+thermal_protection_bed_hysteresis        = 2
+thermal_protection_bed_period            = 20
+
 x_driver_type                            = A4988
 y_driver_type                            = A4988
 z_driver_type                            = A4988
@@ -121,10 +132,10 @@ default_max_acceleration                 = { 3000, 3000, 100, 10000 }
 homing_feedrate_mm_m                     = { (50*60), (50*60), (4*60) }
 homing_bump_divisor                      = { 2, 2, 4 }

-x_enable_on                              = 0
-y_enable_on                              = 0
-z_enable_on                              = 0
-e_enable_on                              = 0
+x_enable_on                              = LOW
+y_enable_on                              = LOW
+z_enable_on                              = LOW
+e_enable_on                              = LOW

 invert_x_dir                             = false
 invert_y_dir                             = true
@@ -136,11 +147,6 @@ step_state_x                             = HIGH
 step_state_y                             = HIGH
 step_state_z                             = HIGH

-disable_x                                = off
-disable_y                                = off
-disable_z                                = off
-disable_e                                = off
-
 proportional_font_ratio                  = 1.0
 default_nominal_filament_dia             = 1.75

@@ -153,18 +159,13 @@ default_retract_acceleration             = 3000
 default_minimumfeedrate                  = 0.0
 default_mintravelfeedrate                = 0.0

-minimum_planner_speed                    = 0.05
 min_steps_per_segment                    = 6
 default_minsegmenttime                   = 20000

 [config:basic]
 bed_overshoot                            = 10
 busy_while_heating                       = on
-default_ejerk                            = 5.0
 default_keepalive_interval               = 2
-default_leveling_fade_height             = 0.0
-disable_other_extruders                  = on
-display_charset_hd44780                  = JAPANESE
 eeprom_boot_silent                       = on
 eeprom_chitchat                          = on
 endstoppullups                           = on
@@ -173,10 +174,8 @@ extrude_mintemp                          = 170
 host_keepalive_feature                   = on
 hotend_overshoot                         = 15
 jd_handle_small_segments                 = on
-lcd_info_screen_style                    = 0
-lcd_language                             = en
 max_bed_power                            = 255
-mesh_inset                               = 0
+
 min_software_endstops                    = on
 max_software_endstops                    = on
 min_software_endstop_x                   = on
@@ -185,50 +184,48 @@ min_software_endstop_z                   = on
 max_software_endstop_x                   = on
 max_software_endstop_y                   = on
 max_software_endstop_z                   = on
-preheat_1_fan_speed                      = 0
+
 preheat_1_label                          = "PLA"
+preheat_1_temp_hotend                    = 180
 preheat_1_temp_bed                       = 70
+preheat_1_fan_speed                      = 0
+
+preheat_2_label                          = "ABS"
+preheat_2_temp_hotend                    = 240
+preheat_2_temp_bed                       = 110
+preheat_2_fan_speed                      = 0
+
 prevent_cold_extrusion                   = on
 prevent_lengthy_extrude                  = on
 printjob_timer_autostart                 = on
-probing_margin                           = 10
-show_bootscreen                          = on
-soft_pwm_scale                           = 0
-string_config_h_author                   = "(none, default config)"
+
 temp_bed_hysteresis                      = 3
 temp_bed_residency_time                  = 10
 temp_bed_window                          = 1
 temp_residency_time                      = 10
 temp_window                              = 1
 validate_homing_endstops                 = on
-xy_probe_feedrate                        = (133*60)
-z_clearance_between_probes               = 5
-z_clearance_deploy_probe                 = 10
-z_clearance_multi_probe                  = 5
+
+editable_steps_per_unit                  = on

 [config:advanced]
 arc_support                              = on
 auto_report_temperatures                 = on
+
 autotemp                                 = on
+autotemp_min                             = 210
+autotemp_max                             = 250
+autotemp_factor                          = 0.1f
 autotemp_oldweight                       = 0.98
-bed_check_interval                       = 5000
+
 default_stepper_timeout_sec              = 120
-default_volumetric_extruder_limit        = 0.00
 disable_idle_x                           = on
 disable_idle_y                           = on
 disable_idle_z                           = on
 disable_idle_e                           = on
 e0_auto_fan_pin                          = -1
-encoder_100x_steps_per_sec               = 80
-encoder_10x_steps_per_sec                = 30
-encoder_rate_multiplier                  = on
-extended_capabilities_report             = on
-extruder_auto_fan_speed                  = 255
-extruder_auto_fan_temperature            = 50
-fanmux0_pin                              = -1
-fanmux1_pin                              = -1
-fanmux2_pin                              = -1
 faster_gcode_parser                      = on
+debug_flags_gcode                        = on
 homing_bump_mm                           = { 5, 5, 2 }
 max_arc_segment_mm                       = 1.0
 min_arc_segment_mm                       = 0.1
@@ -237,11 +234,11 @@ n_arc_correction                         = 25
 serial_overrun_protection                = on
 slowdown                                 = on
 slowdown_divisor                         = 2
-temp_sensor_bed                          = 0
-thermal_protection_bed_hysteresis        = 2
-thermocouple_max_errors                  = 15
 tx_buffer_size                           = 0
+
+bed_check_interval                       = 5000
 watch_bed_temp_increase                  = 2
 watch_bed_temp_period                    = 60
+
 watch_temp_increase                      = 2
-watch_temp_period                        = 20
+watch_temp_period                        = 40
@@ -129,11 +129,11 @@ typedef Servo hal_servo_t;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if !WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #error "MMU2_SERIAL_PORT must be from 0 to 3"
+#ifdef MMU_SERIAL_PORT
+  #if !WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #error "MMU_SERIAL_PORT must be from 0 to 3"
  #endif
-  #define MMU2_SERIAL mmuSerial
+  #define MMU_SERIAL mmuSerial
 #endif

 #ifdef LCD_SERIAL_PORT
@@ -601,20 +601,20 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);

 #endif // SERIAL_PORT_3

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _RX_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::store_rxd_char();
  }

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _UDRE_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::_tx_udr_empty_irq();
  }

-  template class MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> >;
+  template class MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> >;
  MSerialMMU2 mmuSerial(MSerialMMU2::HasEmergencyParser);

-#endif // MMU2_SERIAL_PORT
+#endif // MMU_SERIAL_PORT

 #ifdef LCD_SERIAL_PORT

@@ -246,7 +246,7 @@

 #endif // !USBCON

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT
  template <uint8_t serial>
  struct MMU2SerialCfg {
    static constexpr int PORT               = serial;
@@ -260,7 +260,7 @@
    static constexpr bool RX_OVERRUNS       = false;
  };

-  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> > > MSerialMMU2;
  extern MSerialMMU2 mmuSerial;
 #endif

@@ -22,7 +22,23 @@
 #pragma once

 /**
- * PWM print routines for Atmel 8 bit AVR CPUs
+ * Pins Debugging for Atmel 8 bit AVR CPUs
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #include "../../inc/MarlinConfig.h"
@@ -39,30 +55,30 @@
  #include "pinsDebug_Teensyduino.h"
  // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
  // portModeRegister takes a different argument
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  #define getValidPinMode(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
+  #define getValidPinMode(P) (*portModeRegister(P) & digitalPinToBitMask_DEBUG(P))

 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70

  #include "pinsDebug_plus_70.h"
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer_plus_70(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask_plus_70(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort_plus_70(P)
  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }

 #else

-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)
+  #define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)

 #endif

-#define isValidPin(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define isValidPin(P) (P >= 0 && P < NUMBER_PINS_TOTAL)
 #if AVR_ATmega1284_FAMILY
  #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
  #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
@@ -72,11 +88,11 @@
  #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
  #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)
+#define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin

-void printPinNameByIndex(uint8_t x) {
-  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
+void printPinNameByIndex(const uint8_t index) {
+  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[index].name);
  for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
    char temp_char = pgm_read_byte(name_mem_pointer + y);
    if (temp_char != 0)
@@ -109,7 +125,7 @@ void printPinNameByIndex(uint8_t x) {
 * Print a pin's PWM status.
 * Return true if it's currently a PWM pin.
 */
-bool pwm_status(uint8_t pin) {
+bool pwm_status(const uint8_t pin) {
  char buffer[20];   // for the sprintf statements

  switch (digitalPinToTimer_DEBUG(pin)) {
@@ -276,7 +292,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
  if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }

-void printPinPWM(uint8_t pin) {
+void printPinPWM(const uint8_t pin) {
  switch (digitalPinToTimer_DEBUG(pin)) {

    #if ABTEST(0)
@@ -386,7 +402,7 @@ void printPinPort(const pin_t pin) {   // print port number
  #endif
 }

-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)

 #undef ABTEST
@@ -102,7 +102,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {

 // digitalPinToBitMask(pin) is OK

-#define digitalRead_mod(p)  extDigitalRead(p)   // Teensyduino's version of digitalRead doesn't
+#define digitalRead_mod(P)  extDigitalRead(P)   // Teensyduino's version of digitalRead doesn't
                                                // disable the PWMs so we can use it as is

 // portModeRegister(pin) is OK
@@ -23,43 +23,41 @@

 /**
 * Define SPI Pins: SCK, MISO, MOSI, SS
+ * Platform pins have parentheses, e.g., "(53)", so we cannot use them.
 */
 #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_SCK_PIN  13
-  #define AVR_MISO_PIN 12
-  #define AVR_MOSI_PIN 11
-  #define AVR_SS_PIN   10
+  #define _PIN_SPI_SCK  13
+  #define _PIN_SPI_MISO 12
+  #define _PIN_SPI_MOSI 11
+  #define _PIN_SPI_SS   10
 #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define AVR_SCK_PIN  7
-  #define AVR_MISO_PIN 6
-  #define AVR_MOSI_PIN 5
-  #define AVR_SS_PIN   4
+  #define _PIN_SPI_SCK  7
+  #define _PIN_SPI_MISO 6
+  #define _PIN_SPI_MOSI 5
+  #define _PIN_SPI_SS   4
 #elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define AVR_SCK_PIN  52
-  #define AVR_MISO_PIN 50
-  #define AVR_MOSI_PIN 51
-  #define AVR_SS_PIN   53
+  #define _PIN_SPI_SCK  52
+  #define _PIN_SPI_MISO 50
+  #define _PIN_SPI_MOSI 51
+  #define _PIN_SPI_SS   53
 #elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
-  #define AVR_SCK_PIN  21
-  #define AVR_MISO_PIN 23
-  #define AVR_MOSI_PIN 22
-  #define AVR_SS_PIN   20
+  #define _PIN_SPI_SCK  21
+  #define _PIN_SPI_MISO 23
+  #define _PIN_SPI_MOSI 22
+  #define _PIN_SPI_SS   20
 #elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_SCK_PIN  10
-  #define AVR_MISO_PIN 12
-  #define AVR_MOSI_PIN 11
-  #define AVR_SS_PIN   16
+  #define _PIN_SPI_SCK  10
+  #define _PIN_SPI_MISO 12
+  #define _PIN_SPI_MOSI 11
+  #define _PIN_SPI_SS   16
 #endif

 #ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  AVR_SCK_PIN
+  #define SD_SCK_PIN  _PIN_SPI_SCK
 #endif
 #ifndef SD_MISO_PIN
-  #define SD_MISO_PIN AVR_MISO_PIN
+  #define SD_MISO_PIN _PIN_SPI_MISO
 #endif
 #ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN AVR_MOSI_PIN
-#endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN   AVR_SS_PIN
+  #define SD_MOSI_PIN _PIN_SPI_MOSI
 #endif
@@ -48,7 +48,7 @@ uint16_t MarlinHAL::adc_result;

 void MarlinHAL::init() {
  #if HAS_MEDIA
-    OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
+    OUT_WRITE(SD_SS_PIN, HIGH);  // Try to set SDSS inactive before any other SPI users start up
  #endif
  usb_task_init();          // Initialize the USB stack
  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
@@ -35,67 +35,9 @@

 #include <stdint.h>

-#include "../../core/serial_hook.h"
-
-// ------------------------
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
-typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
-typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
-extern DefaultSerial1 MSerial0;
-extern DefaultSerial2 MSerial1;
-extern DefaultSerial3 MSerial2;
-extern DefaultSerial4 MSerial3;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL1 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL2 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL3 customizedSerial3
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
+//
+// Serial Ports
+//

 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
@@ -600,9 +600,8 @@
      OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
      OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
      OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
-      WRITE(SD_SS_PIN, HIGH);
-
-      OUT_WRITE(SDSS, LOW);
+      OUT_WRITE(SD_SS_PIN, HIGH);
+      WRITE(SD_SS_PIN, LOW);

      PIO_Configure(
        g_APinDescription[SPI_PIN].pPort,
@@ -767,7 +766,7 @@

      // Disable PIO on A26 and A27
      REG_PIOA_PDR = 0x0C000000;
-      OUT_WRITE(SDSS, HIGH);
+      OUT_WRITE(SD_SS_PIN, HIGH);

      // Reset SPI0 (from sam lib)
      SPI0->SPI_CR = SPI_CR_SPIDIS;
@@ -33,6 +33,21 @@
 #include "../../core/types.h"
 #include "../../core/serial_hook.h"

+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#define EP_SERIAL_PORT(N) customizedSerial##N
+#define USB_SERIAL_PORT(N) customizedSerial##N
+#include "../shared/serial_ports.h"
+
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
 // location to which to write the next incoming character and rx_buffer_tail
@@ -291,7 +291,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
      uint32_t *p1 = (uint32_t*)addrflash;
      uint32_t *p2 = (uint32_t*)data;
      int count = 0;
-      for (i =0; i<PageSize >> 2; i++) {
+      for (i = 0; i < PageSize >> 2; i++) {
        if (p1[i] != p2[i]) {
          uint32_t delta = p1[i] ^ p2[i];
          while (delta) {
@@ -19,13 +19,26 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for Due
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for DUE
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #include "../shared/Marduino.h"
@@ -63,20 +76,20 @@

 #define NUMBER_PINS_TOTAL PINS_COUNT

-#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
+#define digitalRead_mod(P) extDigitalRead(P)  // AVR digitalRead disabled PWM before it read the pin
 #define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
-#define getPinByIndex(p) pin_array[p].pin
-#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
-#define isValidPin(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
-#define digitalPinToAnalogIndex(p) int(p - analogInputToDigitalPin(0))
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
 #define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-#define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
-                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
+#define pwm_status(P) (((g_pinStatus[P] & 0xF) == PIN_STATUS_PWM) && \
+                        ((g_APinDescription[P].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin

-bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
  volatile Pio* port = g_APinDescription[pin].pPort;
  uint32_t mask = g_APinDescription[pin].ulPin;
  uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -85,7 +98,7 @@ bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
          || pwm_status(pin));
 }

-void printPinPWM(int32_t pin) {
+void printPinPWM(const int32_t pin) {
  if (pwm_status(pin)) {
    uint32_t chan = g_APinDescription[pin].ulPWMChannel;
    SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
@@ -26,39 +26,36 @@
 *
 * Available chip select pins for HW SPI are 4 10 52 77 87
 */
-#if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
-  #if SDSS == 4
-    #define SPI_PIN         87
-    #define SPI_CHAN         1
-  #elif SDSS == 10
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #elif SDSS == 52
-    #define SPI_PIN         86
-    #define SPI_CHAN         2
-  #elif SDSS == 77
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #else
-    #define SPI_PIN         87
-    #define SPI_CHAN         1
-  #endif
-  #define SD_SCK_PIN        76
-  #define SD_MISO_PIN       74
-  #define SD_MOSI_PIN       75
-#else
-  // defaults
-  #define SOFTWARE_SPI
-  #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN      52
-  #endif
-  #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN     50
-  #endif
-  #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN     51
-  #endif
+#if SD_SS_PIN == 4 || SD_SS_PIN == 10 || SD_SS_PIN == 52 || SD_SS_PIN == 77 || SD_SS_PIN == 87
+  #define SD_SCK_PIN      76
+  #define SD_MISO_PIN     74
+  #define SD_MOSI_PIN     75
 #endif

-/* A.28, A.29, B.21, C.26, C.29 */
-#define SD_SS_PIN         SDSS
+#if SD_SS_PIN == 4
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#elif SD_SS_PIN == 10
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 52
+  #define SPI_PIN         86
+  #define SPI_CHAN         2
+#elif SD_SS_PIN == 77
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 87
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#else
+  #define SOFTWARE_SPI
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN    52
+  #endif
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN   50
+  #endif
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN   51
+  #endif
+#endif
@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init() {
 }

 inline bool media_ready() {
-  return IS_SD_INSERTED() && !IS_SD_PRINTING() && !IS_SD_FILE_OPEN() && card.isMounted();
+  return IS_SD_MOUNTED() && IS_SD_INSERTED() && !IS_SD_FILE_OPEN() && !IS_SD_PRINTING();
 }

 bool sd_mmc_spi_unload(bool) { return true; }
@@ -32,14 +32,14 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
  return CTRL_GOOD;
 }

 // NOTE: This function is defined as returning the address of the last block
 // in the card, which is cardSize() - 1
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
  *nb_sector = card.diskIODriver()->cardSize() - 1;
  return CTRL_GOOD;
 }
@@ -61,7 +61,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -100,7 +100,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -209,16 +209,17 @@ int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 // ADC
 // ------------------------

-#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
-
+// https://docs.espressif.com/projects/esp-idf/en/release-v4.4/esp32/api-reference/peripherals/adc.html
 adc1_channel_t get_channel(int pin) {
  switch (pin) {
-    case 39: return ADC1_CHANNEL(39);
-    case 36: return ADC1_CHANNEL(36);
-    case 35: return ADC1_CHANNEL(35);
-    case 34: return ADC1_CHANNEL(34);
-    case 33: return ADC1_CHANNEL(33);
-    case 32: return ADC1_CHANNEL(32);
+    case 39: return ADC1_CHANNEL_3;
+    case 36: return ADC1_CHANNEL_0;
+    case 35: return ADC1_CHANNEL_7;
+    case 34: return ADC1_CHANNEL_6;
+    case 33: return ADC1_CHANNEL_5;
+    case 32: return ADC1_CHANNEL_4;
+    case 37: return ADC1_CHANNEL_1;
+    case 38: return ADC1_CHANNEL_2;
  }
  return ADC1_CHANNEL_MAX;
 }
@@ -37,6 +37,10 @@
 // Set pin as output
 #define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)

+// TODO: Store set modes in an array and use those to get the mode
+#define _IS_OUTPUT(IO)           true
+#define _IS_INPUT(IO)            true
+
 // Set pin as input with pullup mode
 #define _PULLUP(IO, v)          pinMode(IO, v ? INPUT_PULLUP : INPUT)

@@ -70,6 +74,9 @@
 // Set pin as output and init
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)

+#define IS_OUTPUT(IO)            _IS_OUTPUT(IO)
+#define IS_INPUT(IO)             _IS_INPUT(IO)
+
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)      digitalRead(IO)
 #define extDigitalWrite(IO,V)   digitalWrite(IO,V)
@@ -22,11 +22,15 @@

 #ifdef ARDUINO_ARCH_ESP32

+#include <WiFi.h>
+
+#undef ENABLED
+#undef DISABLED
+
 #include "../../inc/MarlinConfigPre.h"

 #if ALL(WIFISUPPORT, OTASUPPORT)

-#include <WiFi.h>
 #include <ESPmDNS.h>
 #include <WiFiUdp.h>
 #include <ArduinoOTA.h>
@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#error "PINS_DEBUGGING is not yet supported for ESP32!"
+
+/**
+ * Pins Debugging for ESP32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+
+#define digitalRead_mod(P) extDigitalRead(P)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+bool pwm_status(const pin_t) { return false; }
+
+void printPinPort(const pin_t) {}
+
+static bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
+}
+
+void printPinPWM(const int32_t pin) {
+  if (pwm_status(pin)) {
+    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
+    //SERIAL_ECHOPGM("PWM = ", duty);
+  }
+}
@@ -21,7 +21,16 @@
 */
 #pragma once

-#define SD_SS_PIN   SDSS
-#define SD_SCK_PIN  18
-#define SD_MISO_PIN 19
-#define SD_MOSI_PIN 23
+#define PIN_SPI_SCK  18
+#define PIN_SPI_MISO 19
+#define PIN_SPI_MOSI 23
+
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  PIN_SPI_SCK
+#endif
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN PIN_SPI_MISO
+#endif
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN PIN_SPI_MOSI
+#endif
@@ -90,7 +90,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
  config.counter_en  = TIMER_PAUSE;
  config.alarm_en    = TIMER_ALARM_EN;
  config.intr_type   = TIMER_INTR_LEVEL;
-  config.auto_reload = true;
+  config.auto_reload = TIMER_AUTORELOAD_EN;

  // Select and initialize the timer
  timer_init(timer.group, timer.idx, &config);
@@ -21,11 +21,12 @@
 */
 #ifdef ARDUINO_ARCH_ESP32

-#include "../../core/serial.h"
 #include "../../inc/MarlinConfigPre.h"

 #if ENABLED(WIFISUPPORT)

+#include "../../core/serial.h"
+
 #include <WiFi.h>
 #include <ESPmDNS.h>
 #include <ESPAsyncWebServer.h>
@@ -30,69 +30,18 @@

 #include "../../inc/MarlinConfig.h"

-#include "../../core/macros.h"
 #include "../shared/Marduino.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"

 #include "fastio.h"
 #include "timers.h"
-#include "MarlinSerial.h"
-
-#include <stdint.h>

 //
 // Serial Ports
 //
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-#define NUM_UARTS 4

-#if SERIAL_PORT == -1
-  #error "USB Serial is not supported on HC32F460"
-#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #define MYSERIAL1 MSERIAL(1) // Dummy port
-  static_assert(false, "SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #define MYSERIAL2 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_2 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_3, 1, NUM_UARTS)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #define MYSERIAL3 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_3 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #define LCD_SERIAL MSERIAL(1) // Dummy port
-    static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-
-  #if HAS_DGUS_LCD
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
-  #endif
-#endif
+#include "MarlinSerial.h"

 //
 // Emergency Parser
@@ -24,6 +24,14 @@
 #include "../../core/serial_hook.h"
 #include <drivers/usart/Usart.h>

+#define SERIAL_INDEX_MIN 1
+#define SERIAL_INDEX_MAX 4
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
+#endif
+
 // Optionally set uart IRQ priority to reduce overflow errors
 //#define UART_RX_IRQ_PRIO 1
 //#define UART_TX_IRQ_PRIO 1
@@ -11,7 +11,7 @@ The HC32F460 HAL is designed to be generic enough for any HC32F460-based board.
   - Examine the board's main processor. (Refer the naming key in `hc32.ini`.)
   - Extend the `HC32F460C_common` base env for 256K, or `HC32F460E_common` for 512K.
 3. Determine your board's application start address (see [below](#finding-the-application-start-address))
-4. Set `board_build.ld_args.flash_start` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.
+4. Set `board_upload.offset_address` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.

 ### Finding the application start address

@@ -8,6 +8,7 @@
 #define _HC32_APP_CONFIG_H_

 #include "../../inc/MarlinConfigPre.h"
+#include "sysclock.h"

 //
 // dev mode
@@ -64,12 +65,8 @@
 // redirect printf to host serial
 #define REDIRECT_PRINTF_TO_SERIAL 1

-// F_CPU must be known at compile time, but on HC32F460 it's not.
-// Thus we assume HCLK to be 200MHz, as that's what is configured in
-// 'core_hook_sysclock_init' in 'sysclock.cpp'.
-// If you face issues with this assumption, please double-check with the values
-// printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
-// see also: HAL_TIMER_RATE in timers.h
-#define F_CPU 200000000 // 200MHz HCLK
+// F_CPU is F_HCLK, as that's the main CPU core's clock.
+// see 'sysclock.h' for more information.
+#define F_CPU F_HCLK

 #endif // _HC32_APP_CONFIG_H_
@@ -94,8 +94,10 @@
    #error "SERIAL_DMA requires USART_RX_DMA_SUPPORT to be enabled in the arduino core."
  #endif

-  // USART_RX_DMA_SUPPORT does not implement core_hook_usart_rx_irq, which is required for the emergency parser
-  #if ENABLED(EMERGENCY_PARSER)
+  // Before arduino core version 1.2.0, USART_RX_DMA_SUPPORT did not implement
+  // core_hook_usart_rx_irq, which is required for the emergency parser.
+  // With 1.2.0, this was fixed (see https://github.com/shadow578/framework-arduino-hc32f46x/pull/25).
+  #if ENABLED(EMERGENCY_PARSER) && ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 2, 0)
    #error "EMERGENCY_PARSER is not supported with SERIAL_DMA. Please disable either SERIAL_DMA or EMERGENCY_PARSER."
  #endif

@@ -18,41 +18,47 @@
 */
 #pragma once

+/**
+ * Pins Debugging for HC32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
 #include "../../inc/MarlinConfig.h"
 #include "fastio.h"
 #include <drivers/timera/timera_pwm.h>

-//
-// Translation of routines & variables used by pinsDebug.h
-//
 #ifndef BOARD_NR_GPIO_PINS
  #error "Expected BOARD_NR_GPIO_PINS not found."
 #endif

 #define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
 #define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define isValidPin(pin) IS_GPIO_PIN(pin)
+#define isValidPin(P) IS_GPIO_PIN(P)

 // Note: pin_array is defined in `Marlin/src/pins/pinsDebug.h`, and since this file is included
 // after it, it is available in this file as well.
-#define getPinByIndex(p) pin_t(pin_array[p].pin)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define printPinNumber(p)                              \
-  do {                                            \
-    sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); \
-    SERIAL_ECHO(buffer);                          \
-  } while (0)
-#define printPinAnalog(p)                                               \
-  do {                                                                    \
-    sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); \
-    SERIAL_ECHO(buffer);                                                  \
-  } while (0)
-#define PRINT_PORT(p) printPinPort(p)
-#define printPinNameByIndex(x)                                                          \
-  do {                                                                               \
-    sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); \
-    SERIAL_ECHO(buffer);                                                             \
-  } while (0)
+#define getPinByIndex(x) pin_t(pin_array[x].pin)
+#define digitalRead_mod(P) extDigitalRead(P)
+
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(P)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)

 #define MULTI_NAME_PAD 21 // Space needed to be pretty if not first name assigned to a pin

@@ -71,13 +77,13 @@
  #define M43_NEVER_TOUCH(Q) (IS_HOST_USART_PIN(Q) || IS_OSC_PIN(Q))
 #endif

-static int8_t digitalPinToAnalogIndex(pin_t pin) {
+int8_t digitalPinToAnalogIndex(const pin_t pin) {
  if (!isValidPin(pin)) return -1;
  const int8_t adc_channel = int8_t(PIN_MAP[pin].adc_info.channel);
  return pin_t(adc_channel);
 }

-static bool isAnalogPin(pin_t pin) {
+bool isAnalogPin(pin_t pin) {
  if (!isValidPin(pin)) return false;

  if (PIN_MAP[pin].adc_info.channel != ADC_PIN_INVALID)
@@ -86,12 +92,12 @@ static bool isAnalogPin(pin_t pin) {
  return false;
 }

-static bool getValidPinMode(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
  return isValidPin(pin) && !IS_INPUT(pin);
 }

-static bool getPinIsDigitalByIndex(const int16_t array_pin) {
-  const pin_t pin = getPinByIndex(array_pin);
+bool getPinIsDigitalByIndex(const int16_t index) {
+  const pin_t pin = getPinByIndex(index);
  return (!isAnalogPin(pin));
 }

@@ -26,64 +26,144 @@

 #ifdef ARDUINO_ARCH_HC32

-// Get BOARD_XTAL_FREQUENCY from configuration / pins
 #include "../../inc/MarlinConfig.h"
+#include "sysclock.h"

 #include <core_hooks.h>
 #include <drivers/sysclock/sysclock_util.h>

+/***
+ * @brief Automatically calculate M, N, P values for the MPLL to reach a target frequency.
+ * @param input_frequency The input frequency.
+ * @param target_frequency The target frequency.
+ * @return The MPLL configuration structure. Q and R are not set.
+ *
+ * @note
+ * Simplified MPLL block diagram, with intermediary clocks (1) = VCO_in, (2) = VCO_out:
+ *
+ *  INPUT -> [/ M] -(1)-> [* N] -(2)-|-> [/ P] -> MPLL-P
+ */
+constexpr stc_clk_mpll_cfg_t get_mpll_config(double input_frequency, double target_frequency) {
+  // PLL input clock divider: M in [1, 24]
+  for (uint32_t M = 1; M <= 24; M++) {
+    double f_vco_in = input_frequency / M;
+
+    // 1 <= VCO_in <= 25 MHz
+    if (f_vco_in < 1e6 || f_vco_in > 25e6) continue;
+
+    // VCO multiplier: N in [20, 480]
+    for (uint32_t N = 20; N <= 480; N++) {
+      double f_vco_out = f_vco_in * N;
+
+      // 240 <= VCO_out <= 480 MHz
+      if (f_vco_out < 240e6 || f_vco_out > 480e6) continue;
+
+      // Output "P" divider: P in [2, 16]
+      for (uint32_t P = 2; P <= 16; P++) {
+        double f_calculated_out = f_vco_out / P;
+        if (f_calculated_out == target_frequency) {
+          // Found a match, return it
+          return {
+            .PllpDiv = P,
+            .PllqDiv = P, // Don't care for Q and R
+            .PllrDiv = P, // "
+            .plln =    N,
+            .pllmDiv = M
+          };
+        }
+      }
+    }
+  }
+
+  // If no valid M, N, P found, return invalid config
+  return { 0, 0, 0, 0, 0 };
+}
+
+/**
+ * @brief Get the division factor required to get the target frequency from the input frequency.
+ * @tparam input_freq The input frequency.
+ * @tparam target_freq The target frequency.
+ * @return The division factor.
+ */
+template <uint32_t input_freq, uint32_t target_freq>
+constexpr en_clk_sysclk_div_factor_t get_division_factor() {
+  // Calculate the divider to get the target frequency
+  constexpr float fdivider = static_cast<float>(input_freq) / static_cast<float>(target_freq);
+  constexpr int divider = static_cast<int>(fdivider);
+
+  // divider must be an integer
+  static_assert(fdivider == divider, "Target frequency not achievable, divider must be an integer");
+
+  // divider must be between 1 and 64 (enum range), and must be a power of 2
+  static_assert(divider >= 1 && divider <= 64, "Invalid divider, out of range");
+  static_assert((divider & (divider - 1)) == 0, "Invalid divider, not a power of 2");
+
+  // return the divider
+  switch (divider) {
+    case 1:  return ClkSysclkDiv1;
+    case 2:  return ClkSysclkDiv2;
+    case 4:  return ClkSysclkDiv4;
+    case 8:  return ClkSysclkDiv8;
+    case 16: return ClkSysclkDiv16;
+    case 32: return ClkSysclkDiv32;
+    case 64: return ClkSysclkDiv64;
+  }
+}
+
+/**
+ * @brief Validate the runtime clocks match the expected values.
+ */
+void validate_system_clocks() {
+  #define CLOCK_ASSERT(expected, actual)                  \
+    if (expected != actual) {                             \
+      SERIAL_ECHOPGM(                                     \
+        "Clock Mismatch for " #expected ": "              \
+        "expected ", expected,                            \
+        ", got ", actual                                  \
+        );                                                \
+      CORE_ASSERT_FAIL("Clock Mismatch: " #expected);     \
+    }
+
+  update_system_clock_frequencies();
+
+  CLOCK_ASSERT(F_SYSTEM_CLOCK, SYSTEM_CLOCK_FREQUENCIES.system);
+  CLOCK_ASSERT(F_HCLK, SYSTEM_CLOCK_FREQUENCIES.hclk);
+  CLOCK_ASSERT(F_EXCLK, SYSTEM_CLOCK_FREQUENCIES.exclk);
+  CLOCK_ASSERT(F_PCLK0, SYSTEM_CLOCK_FREQUENCIES.pclk0);
+  CLOCK_ASSERT(F_PCLK1, SYSTEM_CLOCK_FREQUENCIES.pclk1);
+  CLOCK_ASSERT(F_PCLK2, SYSTEM_CLOCK_FREQUENCIES.pclk2);
+  CLOCK_ASSERT(F_PCLK3, SYSTEM_CLOCK_FREQUENCIES.pclk3);
+  CLOCK_ASSERT(F_PCLK4, SYSTEM_CLOCK_FREQUENCIES.pclk4);
+}
+
+/**
+ * @brief Configure HC32 system clocks.
+ *
+ * This function is called by the Arduino core early in the startup process, before setup() is called.
+ * It is used to configure the system clocks to the desired state.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
 void core_hook_sysclock_init() {
  // Set wait cycles, as we are about to switch to 200 MHz HCLK
  sysclock_configure_flash_wait_cycles();
  sysclock_configure_sram_wait_cycles();

-  // Configure MPLLp to 200 MHz output, with different settings depending on XTAL availability
-  #if BOARD_XTAL_FREQUENCY == 8000000 // 8 MHz XTAL
-    // - M = 1   => 8 MHz / 1 = 8 MHz
-    // - N = 50  => 8 MHz * 50 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
-    sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);
+  // Select MPLL input frequency based on clock availability
+  #if BOARD_XTAL_FREQUENCY == 8000000 || BOARD_XTAL_FREQUENCY == 16000000 // 8 MHz or 16 MHz XTAL
+    constexpr uint32_t mpll_input_clock = BOARD_XTAL_FREQUENCY;

-  #elif BOARD_XTAL_FREQUENCY == 16000000 // 16 MHz XTAL
-    // - M = 1   => 16 MHz / 1 = 16 MHz
-    // - N = 50  => 16 MHz * 25 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
    sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);

-  #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #if BOARD_XTAL_FREQUENCY == 16000000
+      #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #endif

  #else // HRC (16 MHz)
-    // - M = 1   => 16 MHz / 1 = 16 MHz
-    // - N = 25  => 16 MHz * 25 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 25u,   // N
-        .pllmDiv = 1u, // M
-    };
+
+    constexpr uint32_t mpll_input_clock = 16000000;
+
    sysclock_configure_hrc();
-    sysclock_configure_mpll(ClkPllSrcHRC, &pllConf);

    // HRC could have been configured by ICG to 20 MHz
    // TODO: handle gracefully if HRC is not 16 MHz
@@ -91,29 +171,56 @@ void core_hook_sysclock_init() {
      panic("HRC is not 16 MHz");
    }

-    #ifdef BOARD_XTAL_FREQUENCY
+    #if defined(BOARD_XTAL_FREQUENCY)
      #warning "No valid XTAL frequency defined, falling back to HRC."
    #endif
+
  #endif

-  // sysclk is now configured according to F_CPU (i.e., 200MHz PLL output)
-  const uint32_t sysclock = F_CPU;
+  // Automagically calculate MPLL configuration
+  constexpr stc_clk_mpll_cfg_t pllConf = get_mpll_config(mpll_input_clock, F_SYSTEM_CLOCK);
+  static_assert(pllConf.pllmDiv != 0 && pllConf.plln != 0 && pllConf.PllpDiv != 0, "MPLL auto-configuration failed");
+  sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);

-  // Setup clock divisors for sysclk = 200 MHz
-  // Note: PCLK1 is used for step+temp timers, and need to be kept at 50 MHz (until there is a better solution)
+  // Setup clock divisors
  constexpr stc_clk_sysclk_cfg_t sysClkConf = {
-      .enHclkDiv = ClkSysclkDiv1,  // HCLK  = 200 MHz (CPU)
-      .enExclkDiv = ClkSysclkDiv2, // EXCLK = 100 MHz (SDIO)
-      .enPclk0Div = ClkSysclkDiv2, // PCLK0 = 100 MHz (Timer6 (not used))
-      .enPclk1Div = ClkSysclkDiv4, // PCLK1 = 50 MHz (USART, SPI, I2S, Timer0 (step+temp), TimerA (Servo))
-      .enPclk2Div = ClkSysclkDiv8, // PCLK2 = 25 MHz (ADC)
-      .enPclk3Div = ClkSysclkDiv8, // PCLK3 = 25 MHz (I2C, WDT)
-      .enPclk4Div = ClkSysclkDiv2, // PCLK4 = 100 MHz (ADC ctl)
+    .enHclkDiv  = get_division_factor<F_SYSTEM_CLOCK, F_HCLK>(),
+    .enExclkDiv = get_division_factor<F_SYSTEM_CLOCK, F_EXCLK>(),
+    .enPclk0Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK0>(),
+    .enPclk1Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK1>(),
+    .enPclk2Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK2>(),
+    .enPclk3Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK3>(),
+    .enPclk4Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK4>(),
  };
+  sysclock_set_clock_dividers(&sysClkConf);

+  // Set power mode, before switch
+  power_mode_update_pre(F_SYSTEM_CLOCK);
+
+  // Switch to MPLL-P as system clock source
+  CLK_SetSysClkSource(CLKSysSrcMPLL);
+
+  // Set power mode, after switch
+  power_mode_update_post(F_SYSTEM_CLOCK);
+
+  // Verify clocks match expected values (at runtime)
+  #if ENABLED(MARLIN_DEV_MODE) || ENABLED(ALWAYS_VALIDATE_CLOCKS)
+    validate_system_clocks();
+  #endif
+
+  // Verify clock configuration (at compile time)
  #if ARDUINO_CORE_VERSION_INT >= GET_VERSION_INT(1, 2, 0)
+    assert_mpll_config_valid<
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv,
+      pllConf.PllqDiv,
+      pllConf.PllrDiv
+    >();
+
    assert_system_clocks_valid<
-      sysclock,
+      F_SYSTEM_CLOCK,
      sysClkConf.enHclkDiv,
      sysClkConf.enPclk0Div,
      sysClkConf.enPclk1Div,
@@ -122,18 +229,14 @@ void core_hook_sysclock_init() {
      sysClkConf.enPclk4Div,
      sysClkConf.enExclkDiv
    >();
+
+    static_assert(get_mpll_output_clock(
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv
+    ) == F_SYSTEM_CLOCK, "actual MPLL output clock does not match F_SYSTEM_CLOCK");
  #endif
-
-  sysclock_set_clock_dividers(&sysClkConf);
-
-  // Set power mode
-  power_mode_update_pre(sysclock);
-
-  // Switch to MPLL as sysclk source
-  CLK_SetSysClkSource(CLKSysSrcMPLL);
-
-  // Set power mode
-  power_mode_update_post(sysclock);
 }

 #endif // ARDUINO_ARCH_HC32
@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * HC32F460 system clock configuration.
+ *
+ * With the HC32 HAL, the various peripheral clocks (including the CPU clock) are derived
+ * from the main PLL (MPLL-P) output (referred to at F_SYSTEM_CLOCK).
+ *
+ * F_SYSTEM_CLOCK is the target frequency of the main PLL, and the PLL is automatically configured
+ * to achieve this frequency.
+ *
+ * The peripheral clocks are the result of integer division of F_SYSTEM_CLOCK.
+ * Their target frequencies are defined here, and the required division factors are calculated automatically.
+ * Note that the division factor must be a power of 2 between 1 and 64.
+ * If the target frequency is not achievable, a compile-time error will be generated.
+ *
+ * Additionally, there are interdependencies between the peripheral clocks, which are described in
+ * Section 4.4 "Working Clock Specifications" of the HC32F460 Reference Manual.
+ * With Arduino core >= 1.2.0, these interdependencies are checked at compile time.
+ * On earlier versions, you are on your own.
+ *
+ * For all clock frequencies, they can be checked at runtime by enabling the 'ALWAYS_VALIDATE_CLOCKS' define.
+ * In MARLIN_DEV_MODE, they will also be printed to the serial console by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
+
+// Target peripheral clock frequencies, must be integer divisors of F_SYSTEM_CLOCK.
+// Changing the frequency here will automagically update everything else.
+#define F_HCLK  200000000UL  // 200 MHz; CPU
+#define F_EXCLK (F_HCLK / 2) // 100 MHz; SDIO
+#define F_PCLK0 (F_HCLK / 2) // 100 MHz; Timer6 (unused)
+#define F_PCLK1 (F_HCLK / 4) //  50 MHz; USART, SPI, Timer0 (step + temp), TimerA (Servo)
+#define F_PCLK2 (F_HCLK / 8) //  25 MHz; ADC Sampling
+#define F_PCLK3 (F_HCLK / 8) //  25 MHz; I2C, WDT
+#define F_PCLK4 (F_HCLK / 2) // 100 MHz; ADC Control
+
+// MPLL-P clock target frequency. This must be >= the highest peripheral clock frequency.
+// PLL config is automatically calculated based on this value.
+#define F_SYSTEM_CLOCK F_HCLK
+
+// The Peripheral clocks are only checked at runtime if this is enabled OR MARLIN_DEV_MODE is enabled.
+// Compile time checks are always performed with Arduino core version >= 1.2.0.
+#define ALWAYS_VALIDATE_CLOCKS 1
@@ -20,6 +20,7 @@
 #pragma once
 #include <stdint.h>
 #include <Timer0.h>
+#include "sysclock.h"

 //
 // Timer Types
@@ -42,17 +43,15 @@ extern Timer0 step_timer;
 * HAL_TIMER_RATE must be known at compile time since it's used to calculate
 * STEPPER_TIMER_RATE, which is used in 'constexpr' calculations.
 * On the HC32F460 the timer rate depends on PCLK1, which is derived from the
- * system clock configured at runtime. As a workaround, we use the existing
- * assumption of a 200MHz clock, defining F_CPU as 200000000, then configure PCLK1
- * as F_CPU with a divider of 4 in 'sysclock.cpp::core_hook_sysclock_init'.
+ * system clock configured at runtime.
+ * Thus we use the 'F_PCLK1' constant defined in 'sysclock.h'.
 *
- * If you face issues with this assumption, please double-check with the values
- * printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
 *
- * TODO: If the 'constexpr' requirement is ever lifted, use TIMER0_BASE_FREQUENCY instead
+ * NOTE: If the 'constexpr' requirement is ever lifted, TIMER0_BASE_FREQUENCY could
+ * be used instead. Tho this would probably not make any noticable difference.
 */
-#define HAL_TIMER_RATE (F_CPU / 4) // i.e., 50MHz
-//#define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY
+#define HAL_TIMER_RATE F_PCLK1

 // Temperature timer
 #define TEMP_TIMER_NUM        (&temp_timer)
@@ -37,29 +37,29 @@ constexpr uint8_t NUM_ANALOG_INPUTS = 16;
 constexpr uint8_t analog_offset = NUM_DIGITAL_PINS - NUM_ANALOG_INPUTS;

 // Get the digital pin for an analog index
-constexpr pin_t analogInputToDigitalPin(const int8_t p) {
-  return (WITHIN(p, 0, NUM_ANALOG_INPUTS) ? analog_offset + p : P_NC);
+constexpr pin_t analogInputToDigitalPin(const int8_t a) {
+  return (WITHIN(a, 0, NUM_ANALOG_INPUTS - 1) ? analog_offset + a : P_NC);
 }

 // Get the analog index for a digital pin
-constexpr int8_t digitalPinToAnalogIndex(const pin_t p) {
-  return (WITHIN(p, analog_offset, NUM_DIGITAL_PINS) ? p - analog_offset : P_NC);
+constexpr int8_t digitalPinToAnalogIndex(const pin_t pin) {
+  return (WITHIN(pin, analog_offset, NUM_DIGITAL_PINS - 1) ? pin - analog_offset : P_NC);
 }

 // Return the index of a pin number
 constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) { return pin; }

 // Test whether the pin is valid
-constexpr bool isValidPin(const pin_t p) { return WITHIN(p, 0, NUM_DIGITAL_PINS); }
+constexpr bool isValidPin(const pin_t pin) { return WITHIN(pin, 0, NUM_DIGITAL_PINS - 1); }

 // Test whether the pin is PWM
-constexpr bool PWM_PIN(const pin_t p) { return false; }
+constexpr bool PWM_PIN(const pin_t) { return false; }

 // Test whether the pin is interruptible
-constexpr bool INTERRUPT_PIN(const pin_t p) { return false; }
+constexpr bool INTERRUPT_PIN(const pin_t) { return false; }

 // Get the pin number at the given index
-constexpr pin_t GET_PIN_MAP_PIN(const int16_t ind) { return ind; }
+constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) { return pin_t(index); }

 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
@@ -19,26 +19,46 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for X86_64
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for Linux Native
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL   NUM_DIGITAL_PINS
-#define isAnalogPin(P)        (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p)  digitalRead(p)
-#define getPinByIndex(p)    pin_array[p].pin
-#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD      16 // space needed to be pretty if not first name assigned to a pin

+#define getPinByIndex(x) pin_array[x].pin
+
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+
 // active ADC function/mode/code values for PINSEL registers
-constexpr int8_t ADC_pin_mode(pin_t pin) { return -1; }
+constexpr int8_t ADC_pin_mode(const pin_t) { return -1; }
+
+// The pin and index are the same on this platform
+bool getPinIsDigitalByIndex(const pin_t pin) {
+  return (!isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
+}
+
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0)
+
+#define digitalRead_mod(P) digitalRead(P)

 int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? 0 : -1; }

@@ -50,11 +70,11 @@ bool getValidPinMode(const pin_t pin) {
  return (Gpio::getMode(pin) != 0); // Input/output state
 }

-bool getPinIsDigitalByIndex(const pin_t pin) {
-  return (!isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
-}
-
-void printPinPWM(const pin_t pin) {}
+void printPinPWM(const pin_t) {}
 bool pwm_status(const pin_t) { return false; }

 void printPinPort(const pin_t) {}
+
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
@@ -38,9 +38,3 @@
 #ifndef SD_MOSI_PIN
  #define SD_MOSI_PIN       52
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         53
-#endif
-#ifndef SDSS
-  #define SDSS       SD_SS_PIN
-#endif
@@ -35,8 +35,6 @@
 #include <CDCSerial.h>
 #include <usb/mscuser.h>

-DefaultSerial1 USBSerial(false, UsbSerial);
-
 uint32_t MarlinHAL::adc_result = 0;
 pin_t MarlinHAL::adc_pin = 0;

@@ -38,72 +38,15 @@ extern "C" volatile uint32_t _millis;
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
-#include "MarlinSerial.h"

 #include <adc.h>
 #include <pinmapping.h>
-#include <CDCSerial.h>

-// ------------------------
-// Serial ports
-// ------------------------
+//
+// Serial Ports
+//

-typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
-extern DefaultSerial1 USBSerial;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1
-  #define MYSERIAL1 USBSerial
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #define MYSERIAL2 USBSerial
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #define MYSERIAL3 USBSerial
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL USBSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL USBSerial
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
-  #endif
-#endif
+#include "MarlinSerial.h"

 //
 // Interrupts
@@ -25,6 +25,8 @@

 #include "../../inc/MarlinConfig.h"

+DefaultSerial1 USBSerial(false, UsbSerial);
+
 #if USING_HW_SERIAL0
  MarlinSerial _MSerial0(LPC_UART0);
  MSerialT MSerial0(true, _MSerial0);
@@ -21,6 +21,7 @@
 */
 #pragma once

+#include <CDCSerial.h>
 #include <HardwareSerial.h>
 #include <WString.h>

@@ -30,6 +31,18 @@
 #endif
 #include "../../core/serial_hook.h"

+typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
+extern DefaultSerial1 USBSerial;
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#define USB_SERIAL_PORT(...) USBSerial
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
+#endif
+
 class MarlinSerial : public HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE> {
 public:
  MarlinSerial(LPC_UART_TypeDef *UARTx) : HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE>(UARTx) { }
@@ -121,7 +121,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
    #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
      #error "Serial port pins (1) conflict with Encoder Buttons!"
    #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \
-       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
+       || ANY_RX(1, LCD_SDSS_PIN, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
      #error "Serial port pins (1) conflict with LCD pins!"
    #endif
  #endif
@@ -211,8 +211,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
      #error "SCL0 overlaps with Encoder Button!"
    #elif IS_SCL0(SD_SS_PIN)
      #error "SCL0 overlaps with SD_SS_PIN!"
-    #elif IS_SCL0(LCD_SDSS)
-      #error "SCL0 overlaps with LCD_SDSS!"
+    #elif IS_SCL0(LCD_SDSS_PIN)
+      #error "SCL0 overlaps with LCD_SDSS_PIN!"
    #endif
    #undef PIN_IS_SDA0
    #undef IS_SCL0
@@ -19,22 +19,35 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#pragma once

 /**
- * Support routines for LPC1768
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for LPC1768/9
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define getPinByIndex(p) pin_array[p].pin
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0)
+#define digitalRead_mod(P) extDigitalRead(P)
+#define getPinByIndex(x) pin_array[x].pin
 #define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(P), LPC176x::pin_bit(P)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(P)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 17 // space needed to be pretty if not first name assigned to a pin

 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
@@ -32,7 +32,6 @@
 //#define SD_SCK_PIN     P0_07
 //#define SD_MISO_PIN    P0_08
 //#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06

 // External SD
 #ifndef SD_SCK_PIN
@@ -44,10 +43,3 @@
 #ifndef SD_MOSI_PIN
  #define SD_MOSI_PIN       P0_18
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         P1_23
-#endif
-#if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h
-  #undef SDSS
-  #define SDSS          SD_SS_PIN
-#endif
@@ -37,7 +37,7 @@ if pioutil.is_pio_build():
                #
                # platformio.ini will accept this for a Windows upload port designation: 'upload_port = L:'
                #   Windows - doesn't care about the disk's name, only cares about the drive letter
-                import subprocess,string
+                import subprocess, string
                from ctypes import windll
                from pathlib import PureWindowsPath

@@ -71,37 +71,10 @@ extern MSerialT serial_stream_2;
 extern MSerialT serial_stream_3;

 #define _MSERIAL(X) serial_stream_##X
-#define MSERIAL(X) _MSERIAL(X)

-#if WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "SERIAL_PORT must be from 0 to 3. Please update your configuration."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3. Please update your configuration."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3. Please update your configuration."
-  #endif
-#endif
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#include "../shared/serial_ports.h"

 // ------------------------
 // Interrupts
@@ -25,7 +25,7 @@
 #include "../../inc/MarlinConfig.h"
 #include "pinsDebug.h"

-int8_t ADC_pin_mode(pin_t pin) { return -1; }
+int8_t ADC_pin_mode(const pin_t) { return -1; }

 int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? 0 : -1; }

@@ -37,6 +37,7 @@ bool getValidPinMode(const pin_t pin) {
  return (Gpio::getMode(pin) != 0); // Input/output state
 }

+// The pin and index are the same on this platform
 bool getPinIsDigitalByIndex(const pin_t pin) {
  return !isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin);
 }
@@ -19,30 +19,43 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
-/**
- * Support routines for X86_64
- */
 #pragma once

 /**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for x86_64
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p)  digitalRead(p)
-#define getPinByIndex(p) pin_array[p].pin
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0)
+#define digitalRead_mod(P)  digitalRead(P)
+#define getPinByIndex(x) pin_array[x].pin
 #define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin

 // Active ADC function/mode/code values for PINSEL registers
-int8_t ADC_pin_mode(pin_t pin);
-int8_t get_pin_mode(const pin_t pin);
-bool getValidPinMode(const pin_t pin);
-bool getPinIsDigitalByIndex(const pin_t pin);
+int8_t ADC_pin_mode(const pin_t);
+int8_t get_pin_mode(const pin_t);
+bool getValidPinMode(const pin_t);
+bool getPinIsDigitalByIndex(const pin_t);
 void printPinPort(const pin_t);
 void printPinPWM(const pin_t);
 bool pwm_status(const pin_t);
@@ -32,7 +32,6 @@
 //#define SD_SCK_PIN     P0_07
 //#define SD_MISO_PIN    P0_08
 //#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06

 // External SD
 #ifndef SD_SCK_PIN
@@ -44,9 +43,3 @@
 #ifndef SD_MOSI_PIN
  #define SD_MOSI_PIN       52
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         53
-#endif
-#ifndef SDSS
-  #define SDSS       SD_SS_PIN
-#endif
@@ -0,0 +1,185 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "HAL.h"
+//#include "usb_serial.h"
+
+#include "../../inc/MarlinConfig.h"
+#include "../shared/Delay.h"
+
+extern "C" {
+  #include "pico/bootrom.h"
+  #include "hardware/watchdog.h"
+}
+
+#if HAS_SD_HOST_DRIVE
+  #include "msc_sd.h"
+  #include "usbd_cdc_if.h"
+#endif
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+volatile uint16_t adc_result;
+
+// ------------------------
+// Public functions
+// ------------------------
+
+TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
+
+// HAL initialization task
+void MarlinHAL::init() {
+  // Ensure F_CPU is a constant expression.
+  // If the compiler breaks here, it means that delay code that should compute at compile time will not work.
+  // So better safe than sorry here.
+  constexpr int cpuFreq = F_CPU;
+  UNUSED(cpuFreq);
+
+  #if HAS_MEDIA && DISABLED(SDIO_SUPPORT) && PIN_EXISTS(SD_SS)
+    OUT_WRITE(SD_SS_PIN, HIGH); // Try to set SD_SS_PIN inactive before any other SPI users start up
+  #endif
+
+  #if PIN_EXISTS(LED)
+    OUT_WRITE(LED_PIN, LOW);
+  #endif
+
+  #if ENABLED(SRAM_EEPROM_EMULATION)
+    // __HAL_RCC_PWR_CLK_ENABLE();
+    // HAL_PWR_EnableBkUpAccess();           // Enable access to backup SRAM
+    // __HAL_RCC_BKPSRAM_CLK_ENABLE();
+    // LL_PWR_EnableBkUpRegulator();         // Enable backup regulator
+    // while (!LL_PWR_IsActiveFlag_BRR());   // Wait until backup regulator is initialized
+  #endif
+
+  HAL_timer_init();
+
+  #if ENABLED(EMERGENCY_PARSER) && USBD_USE_CDC
+    USB_Hook_init();
+  #endif
+
+  TERN_(POSTMORTEM_DEBUGGING, install_min_serial());    // Install the min serial handler
+
+  TERN_(HAS_SD_HOST_DRIVE, MSC_SD_init());              // Enable USB SD card access
+
+  #if PIN_EXISTS(USB_CONNECT)
+    OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection
+    delay_ms(1000);                                        // Give OS time to notice
+    WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
+  #endif
+}
+
+uint8_t MarlinHAL::get_reset_source() {
+  return watchdog_enable_caused_reboot() ? RST_WATCHDOG : 0;
+}
+
+void MarlinHAL::reboot() { watchdog_reboot(0, 0, 1); }
+
+// ------------------------
+// Watchdog Timer
+// ------------------------
+
+#if ENABLED(USE_WATCHDOG)
+
+  #define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
+  extern "C" {
+    #include "hardware/watchdog.h"
+  }
+
+  void MarlinHAL::watchdog_init() {
+    #if DISABLED(DISABLE_WATCHDOG_INIT)
+      static_assert(WDT_TIMEOUT_US > 1000, "WDT Timout is too small, aborting");
+      watchdog_enable(WDT_TIMEOUT_US/1000, true);
+    #endif
+  }
+
+  void MarlinHAL::watchdog_refresh() {
+    watchdog_update();
+    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
+      TOGGLE(LED_PIN);  // heartbeat indicator
+    #endif
+  }
+
+#endif
+
+// ------------------------
+// ADC
+// ------------------------
+
+volatile bool MarlinHAL::adc_has_result = false;
+
+void MarlinHAL::adc_init() {
+  analogReadResolution(HAL_ADC_RESOLUTION);
+  ::adc_init();
+  adc_fifo_setup(true, false, 1, false, false);
+  irq_set_exclusive_handler(ADC_IRQ_FIFO, adc_exclusive_handler);
+  irq_set_enabled(ADC_IRQ_FIFO, true);
+  adc_irq_set_enabled(true);
+}
+
+void MarlinHAL::adc_enable(const pin_t pin) {
+  if (pin >= A0 && pin <= A3)
+    adc_gpio_init(pin);
+  else if (pin == HAL_ADC_MCU_TEMP_DUMMY_PIN)
+    adc_set_temp_sensor_enabled(true);
+}
+
+void MarlinHAL::adc_start(const pin_t pin) {
+  adc_has_result = false;
+  // Select an ADC input. 0...3 are GPIOs 26...29 respectively.
+  adc_select_input(pin == HAL_ADC_MCU_TEMP_DUMMY_PIN ? 4 : pin - A0);
+  adc_run(true);
+}
+
+void MarlinHAL::adc_exclusive_handler() {
+  adc_run(false); // Disable since we only want one result
+  irq_clear(ADC_IRQ_FIFO); // Clear the IRQ
+
+  if (adc_fifo_get_level() >= 1) {
+    adc_result = adc_fifo_get(); // Pop the result
+    adc_fifo_drain();
+    adc_has_result = true; // Signal the end of the conversion
+  }
+}
+
+uint16_t MarlinHAL::adc_value() { return adc_result; }
+
+// Reset the system to initiate a firmware flash
+void flashFirmware(const int16_t) { hal.reboot(); }
+
+extern "C" {
+  void * _sbrk(int incr);
+  extern unsigned int __bss_end__; // end of bss section
+}
+
+// Return free memory between end of heap (or end bss) and whatever is current
+int freeMemory() {
+  int free_memory, heap_end = (int)_sbrk(0);
+  return (int)&free_memory - (heap_end ?: (int)&__bss_end__);
+}
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,193 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define CPU_32_BIT
+
+#ifndef F_CPU
+  #define F_CPU (XOSC_MHZ * 1000000UL)
+#endif
+
+#include "arduino_extras.h"
+#include "../../core/macros.h"
+#include "../shared/Marduino.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
+#include "fastio.h"
+//#include "Servo.h"
+#include "watchdog.h"
+
+#include "../../inc/MarlinConfigPre.h"
+
+#include <stdint.h>
+
+//
+// Serial Ports
+//
+
+#include "MarlinSerial.h"
+
+// ------------------------
+// Defines
+// ------------------------
+
+/**
+ * TODO: review this to return 1 for pins that are not analog input
+ */
+#ifndef analogInputToDigitalPin
+  #define analogInputToDigitalPin(p) (p)
+#endif
+
+#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define cli() __disable_irq()
+#define sei() __enable_irq()
+
+// ------------------------
+// Types
+// ------------------------
+
+template <bool, class L, class R> struct IFPIN { typedef R type; };
+template <class L, class R> struct IFPIN<true, L, R> { typedef L type; };
+typedef IFPIN<sizeof(pin_size_t) == 1, int8_t, int16_t>::type pin_t;
+
+class libServo;
+typedef libServo hal_servo_t;
+#define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos()
+#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
+
+// ------------------------
+// ADC
+// ------------------------
+
+#define HAL_ADC_VREF         3.3
+#ifdef ADC_RESOLUTION
+  #define HAL_ADC_RESOLUTION ADC_RESOLUTION
+#else
+  #define HAL_ADC_RESOLUTION 12
+#endif
+// ADC index 4 is the MCU temperature
+#define HAL_ADC_MCU_TEMP_DUMMY_PIN 127
+
+//
+// Pin Mapping for M42, M43, M226
+//
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+#ifndef PLATFORM_M997_SUPPORT
+  #define PLATFORM_M997_SUPPORT
+#endif
+void flashFirmware(const int16_t);
+
+// Maple Compatibility
+typedef void (*systickCallback_t)(void);
+void systick_attach_callback(systickCallback_t cb);
+void HAL_SYSTICK_Callback();
+
+extern volatile uint32_t systick_uptime_millis;
+
+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+#define PWM_FREQUENCY 1000     // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency()
+
+// ------------------------
+// Class Utilities
+// ------------------------
+
+int freeMemory();
+
+// ------------------------
+// MarlinHAL Class
+// ------------------------
+
+class MarlinHAL {
+public:
+
+  // Earliest possible init, before setup()
+  MarlinHAL() {}
+
+  // Watchdog
+  static void watchdog_init()    IF_DISABLED(USE_WATCHDOG, {});
+  static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
+
+  static void init();          // Called early in setup()
+  static void init_board() {}  // Called less early in setup()
+  static void reboot();        // Restart the firmware from 0x0
+
+  // Interrupts
+  static bool isr_state() { return !__get_PRIMASK(); }
+  static void isr_on()  { __enable_irq(); }
+  static void isr_off() { __disable_irq(); }
+
+  static void delay_ms(const int ms) { ::delay(ms); }
+
+  // Tasks, called from idle()
+  static void idletask() {}
+
+  // Reset
+  static uint8_t get_reset_source();
+  static void clear_reset_source() {}
+
+  // Free SRAM
+  static int freeMemory() { return ::freeMemory(); }
+
+  //
+  // ADC Methods
+  //
+
+  // Called by Temperature::init once at startup
+  static void adc_init();
+
+  // Called by Temperature::init for each sensor at startup
+  static void adc_enable(const pin_t pin);
+
+  // Begin ADC sampling on the given pin. Called from Temperature::isr!
+  static void adc_start(const pin_t pin);
+
+  // This ADC runs a periodic task
+  static void adc_exclusive_handler();
+
+  // Is the ADC ready for reading?
+  static volatile bool adc_has_result;
+  static bool adc_ready() { return adc_has_result; }
+
+  // The current value of the ADC register
+  static uint16_t adc_value();
+
+  /**
+   * Set the PWM duty cycle for the pin to the given value.
+   * Optionally invert the duty cycle [default = false]
+   * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
+   */
+  static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
+
+  /**
+   * Set the frequency of the timer for the given pin as close as
+   * possible to the provided desired frequency. Internally calculate
+   * the required waveform generation mode, prescaler, and resolution
+   * values and set timer registers accordingly.
+   * NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
+   * NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST_PWM_FAN Settings)
+   */
+  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
+};
@@ -0,0 +1,69 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+
+#include "../shared/HAL_MinSerial.h"
+
+
+static void TXBegin() {
+  #if !WITHIN(SERIAL_PORT, -1, 2)
+    #warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
+    #warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
+  #else
+    #if SERIAL_PORT == -1
+      USBSerial.begin(BAUDRATE);
+    #elif SERIAL_PORT == 0
+      USBSerial.begin(BAUDRATE);
+    #elif SERIAL_PORT == 1
+      Serial1.begin(BAUDRATE);
+    #endif
+  #endif
+}
+
+static void TX(char b){
+    #if SERIAL_PORT == -1
+      USBSerial
+    #elif SERIAL_PORT == 0
+      USBSerial
+    #elif SERIAL_PORT == 1
+      Serial1
+    #endif
+    .write(b);
+}
+
+// A SW memory barrier, to ensure GCC does not overoptimize loops
+#define sw_barrier() __asm__ volatile("": : :"memory");
+
+
+void install_min_serial() {
+  HAL_min_serial_init = &TXBegin;
+  HAL_min_serial_out = &TX;
+}
+
+#endif // POSTMORTEM_DEBUGGING
+#endif // __PLAT_RP2040__
@@ -0,0 +1,228 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+#include <SPI.h>
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+static SPISettings spiConfig;
+
+// ------------------------
+// Public functions
+// ------------------------
+
+#if ENABLED(SOFTWARE_SPI)
+
+  // ------------------------
+  // Software SPI
+  // ------------------------
+
+  #include "../shared/Delay.h"
+
+  void spiBegin(void) {
+    OUT_WRITE(SD_SS_PIN, HIGH);
+    OUT_WRITE(SD_SCK_PIN, HIGH);
+    SET_INPUT(SD_MISO_PIN);
+    OUT_WRITE(SD_MOSI_PIN, HIGH);
+  }
+
+  // Use function with compile-time value so we can actually reach the desired frequency
+  // Need to adjust this a little bit: on a 72MHz clock, we have 14ns/clock
+  // and we'll use ~3 cycles to jump to the method and going back, so it'll take ~40ns from the given clock here
+  #define CALLING_COST_NS  (3U * 1000000000U) / (F_CPU)
+  void (*delaySPIFunc)();
+  void delaySPI_125()  { DELAY_NS(125 - CALLING_COST_NS); }
+  void delaySPI_250()  { DELAY_NS(250 - CALLING_COST_NS); }
+  void delaySPI_500()  { DELAY_NS(500 - CALLING_COST_NS); }
+  void delaySPI_1000() { DELAY_NS(1000 - CALLING_COST_NS); }
+  void delaySPI_2000() { DELAY_NS(2000 - CALLING_COST_NS); }
+  void delaySPI_4000() { DELAY_NS(4000 - CALLING_COST_NS); }
+
+  void spiInit(uint8_t spiRate) {
+    // Use datarates Marlin uses
+    switch (spiRate) {
+      case SPI_FULL_SPEED:   delaySPIFunc =  &delaySPI_125; break;  // desired: 8,000,000  actual: ~1.1M
+      case SPI_HALF_SPEED:   delaySPIFunc =  &delaySPI_125; break;  // desired: 4,000,000  actual: ~1.1M
+      case SPI_QUARTER_SPEED:delaySPIFunc =  &delaySPI_250; break;  // desired: 2,000,000  actual: ~890K
+      case SPI_EIGHTH_SPEED: delaySPIFunc =  &delaySPI_500; break;  // desired: 1,000,000  actual: ~590K
+      case SPI_SPEED_5:      delaySPIFunc = &delaySPI_1000; break;  // desired:   500,000  actual: ~360K
+      case SPI_SPEED_6:      delaySPIFunc = &delaySPI_2000; break;  // desired:   250,000  actual: ~210K
+      default:               delaySPIFunc = &delaySPI_4000; break;  // desired:   125,000  actual: ~123K
+    }
+    SPI.begin();
+  }
+
+  // Begin SPI transaction, set clock, bit order, data mode
+  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ }
+
+  uint8_t HAL_SPI_RP2040_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
+    for (uint8_t bits = 8; bits--;) {
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, b & 0x80);
+
+      delaySPIFunc();
+      WRITE(SD_SCK_PIN, HIGH);
+      delaySPIFunc();
+
+      b <<= 1;        // little setup time
+      b |= (READ(SD_MISO_PIN) != 0);
+    }
+    DELAY_NS(125);
+    return b;
+  }
+
+  // Soft SPI receive byte
+  uint8_t spiRec() {
+    hal.isr_off();  // No interrupts during byte receive
+    const uint8_t data = HAL_SPI_RP2040_SpiTransfer_Mode_3(0xFF);
+    hal.isr_on();   // Enable interrupts
+    return data;
+  }
+
+  // Soft SPI read data
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
+    for (uint16_t i = 0; i < nbyte; i++)
+      buf[i] = spiRec();
+  }
+
+  // Soft SPI send byte
+  void spiSend(uint8_t data) {
+    hal.isr_off();                            // No interrupts during byte send
+    HAL_SPI_RP2040_SpiTransfer_Mode_3(data);  // Don't care what is received
+    hal.isr_on();                             // Enable interrupts
+  }
+
+  // Soft SPI send block
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+    spiSend(token);
+    for (uint16_t i = 0; i < 512; i++)
+      spiSend(buf[i]);
+  }
+
+#else
+
+  // ------------------------
+  // Hardware SPI
+  // ------------------------
+
+  /**
+   * VGPV SPI speed start and PCLK2/2, by default 108/2 = 54Mhz
+   */
+
+  /**
+   * @brief  Begin SPI port setup
+   *
+   * @return Nothing
+   *
+   * @details Only configures SS pin since stm32duino creates and initialize the SPI object
+   */
+  void spiBegin() {
+    #if PIN_EXISTS(SD_SS)
+      OUT_WRITE(SD_SS_PIN, HIGH);
+    #endif
+  }
+
+  // Configure SPI for specified SPI speed
+  void spiInit(uint8_t spiRate) {
+    // Use datarates Marlin uses
+    uint32_t clock;
+    switch (spiRate) {
+      case SPI_FULL_SPEED:    clock = 20000000; break; // 13.9mhz=20000000  6.75mhz=10000000  3.38mhz=5000000  .833mhz=1000000
+      case SPI_HALF_SPEED:    clock =  5000000; break;
+      case SPI_QUARTER_SPEED: clock =  2500000; break;
+      case SPI_EIGHTH_SPEED:  clock =  1250000; break;
+      case SPI_SPEED_5:       clock =   625000; break;
+      case SPI_SPEED_6:       clock =   300000; break;
+      default:
+        clock = 4000000; // Default from the SPI library
+    }
+    spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
+
+    //SPI.setMISO(SD_MISO_PIN); //todo: implement? bad interface
+    //SPI.setMOSI(SD_MOSI_PIN);
+    //SPI.setSCLK(SD_SCK_PIN);
+
+    SPI.begin();
+  }
+
+  /**
+   * @brief  Receives a single byte from the SPI port.
+   *
+   * @return Byte received
+   *
+   * @details
+   */
+  uint8_t spiRec() {
+    uint8_t returnByte = SPI.transfer(0xFF);
+    return returnByte;
+  }
+
+  /**
+   * @brief  Receive a number of bytes from the SPI port to a buffer
+   *
+   * @param  buf   Pointer to starting address of buffer to write to.
+   * @param  nbyte Number of bytes to receive.
+   * @return Nothing
+   *
+   * @details Uses DMA
+   */
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
+    if (nbyte == 0) return;
+    memset(buf, 0xFF, nbyte);
+    SPI.transfer(buf, nbyte);
+  }
+
+  /**
+   * @brief  Send a single byte on SPI port
+   *
+   * @param  b Byte to send
+   *
+   * @details
+   */
+  void spiSend(uint8_t b) {
+    SPI.transfer(b);
+  }
+
+  /**
+   * @brief  Write token and then write from 512 byte buffer to SPI (for SD card)
+   *
+   * @param  buf   Pointer with buffer start address
+   * @return Nothing
+   *
+   * @details Use DMA
+   */
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+    //uint8_t rxBuf[512];
+    //SPI.transfer(token);
+    SPI.transfer((uint8_t*)buf, 512); //implement? bad interface
+  }
+
+#endif // SOFTWARE_SPI
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+#include "MarlinSerial.h"
+
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
+#define IMPLEMENT_SERIAL(X)  _IMPLEMENT_SERIAL(X)
+#if WITHIN(SERIAL_PORT, 0, 3)
+  IMPLEMENT_SERIAL(SERIAL_PORT);
+#endif
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,50 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+#include "../../core/serial_hook.h"
+
+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+extern DefaultSerial1 MSerial0;
+typedef ForwardSerial1Class<decltype(SerialUSB)> USBSerialType;
+extern USBSerialType USBSerial;
+
+#define Serial0 Serial
+#define _DECLARE_SERIAL(X) \
+  typedef ForwardSerial1Class<decltype(Serial##X)> DefaultSerial##X; \
+  extern DefaultSerial##X MSerial##X
+#define DECLARE_SERIAL(X) _DECLARE_SERIAL(X)
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 6
+#define USB_SERIAL_PORT(...) MSerial0
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
+#endif
@@ -0,0 +1 @@
+# RP2040 Hardware Interface
@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_SERVOS
+
+#include "Servo.h"
+
+static uint_fast8_t servoCount = 0;
+static libServo *servos[NUM_SERVOS] = {0};
+constexpr millis_t servoDelay[] = SERVO_DELAY;
+static_assert(COUNT(servoDelay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
+
+libServo::libServo()
+: delay(servoDelay[servoCount]),
+  was_attached_before_pause(false),
+  value_before_pause(0)
+{
+  servos[servoCount++] = this;
+}
+
+int8_t libServo::attach(const int pin) {
+  if (servoCount >= MAX_SERVOS) return -1;
+  if (pin > 0) servo_pin = pin;
+  auto result = pico_servo.attach(servo_pin);
+  return result;
+}
+
+int8_t libServo::attach(const int pin, const int min, const int max) {
+  if (servoCount >= MAX_SERVOS) return -1;
+  if (pin > 0) servo_pin = pin;
+  auto result = pico_servo.attach(servo_pin, min, max);
+  return result;
+}
+
+void libServo::move(const int value) {
+  if (attach(0) >= 0) {
+    pico_servo.write(value);
+    safe_delay(delay);
+    TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+  }
+}
+
+void libServo::pause() {
+  was_attached_before_pause = pico_servo.attached();
+  if (was_attached_before_pause) {
+    value_before_pause = pico_servo.read();
+    pico_servo.detach();
+  }
+}
+
+void libServo::resume() {
+  if (was_attached_before_pause) {
+    attach();
+    move(value_before_pause);
+  }
+}
+
+void libServo::pause_all_servos() {
+  for (auto& servo : servos)
+    if (servo) servo->pause();
+}
+
+void libServo::resume_all_servos() {
+  for (auto& servo : servos)
+    if (servo) servo->resume();
+}
+
+#endif // HAS_SERVOS
+#endif // __PLAT_RP2040__
@@ -0,0 +1,77 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <Servo.h>
+
+#if 1
+
+#include "../../core/millis_t.h"
+
+// Inherit and expand on the official library
+class libServo {
+  public:
+    libServo();
+    int8_t attach(const int pin = 0); // pin == 0 uses value from previous call
+    int8_t attach(const int pin, const int min, const int max);
+    void detach() { pico_servo.detach(); }
+    int read() { return pico_servo.read(); }
+    void move(const int value);
+
+    void pause();
+    void resume();
+
+    static void pause_all_servos();
+    static void resume_all_servos();
+    static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
+
+  private:
+    Servo pico_servo;
+
+    int servo_pin = 0;
+    millis_t delay = 0;
+
+    bool was_attached_before_pause;
+    int value_before_pause;
+};
+
+#else
+
+class libServo: public Servo {
+  public:
+  void move(const int value) {
+    constexpr uint16_t servo_delay[] = SERVO_DELAY;
+    static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
+
+    if (attach(servo_info[servoIndex].Pin.nbr) >= 0) {    // try to reattach
+      write(value);
+      safe_delay(servo_delay[servoIndex]); // delay to allow servo to reach position
+      TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+    }
+
+  }
+};
+
+class libServo;
+typedef libServo hal_servo_t;
+
+#endif
@@ -0,0 +1,33 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef __PLAT_RP2040__
+
+#include <iostream>
+
+char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s) {
+  char format_string[20];
+  snprintf(format_string, 20, "%%%d.%df", __width, __prec);
+  sprintf(__s, format_string, __val);
+  return __s;
+}
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// #include <stddef.h>
+// #include <stdint.h>
+// #include <math.h>
+// #include <cstring>
+
+char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s);
@@ -0,0 +1,88 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+
+#include "../shared/eeprom_api.h"
+
+// NOTE: The Bigtreetech SKR Pico has an onboard W25Q16 flash module
+
+// Use EEPROM.h for compatibility, for now.
+#include <EEPROM.h>
+
+static bool eeprom_data_written = false;
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
+#endif
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+
+bool PersistentStore::access_start() {
+  EEPROM.begin(); // Avoid EEPROM.h warning (do nothing)
+  eeprom_buffer_fill();
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+  if (eeprom_data_written) {
+    TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
+    hal.isr_off();
+    eeprom_buffer_flush();
+    hal.isr_on();
+    TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
+    eeprom_data_written = false;
+  }
+  return true;
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  while (size--) {
+    uint8_t v = *value;
+    if (v != eeprom_buffered_read_byte(pos)) {
+      eeprom_buffered_write_byte(pos, v);
+      eeprom_data_written = true;
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    const uint8_t c = eeprom_buffered_read_byte(pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // FLASH_EEPROM_EMULATION
+#endif // __PLAT_RP2040__
@@ -0,0 +1,79 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+#if USE_WIRED_EEPROM
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */
+
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
+#endif
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+
+bool PersistentStore::access_start()  { eeprom_init(); return true; }
+bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
+  while (size--) {
+    uint8_t v = *value;
+    uint8_t * const p = (uint8_t * const)pos;
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
+      eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    // Read from either external EEPROM, program flash or Backup SRAM
+    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // USE_WIRED_EEPROM
+#endif // __PLAT_RP2040__
@@ -0,0 +1,60 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../module/endstops.h"
+
+// One ISR for all EXT-Interrupts
+void endstop_ISR() { endstops.update(); }
+
+void setup_endstop_interrupts() {
+  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
+  TERN_(USE_X_MAX, _ATTACH(X_MAX_PIN));
+  TERN_(USE_X_MIN, _ATTACH(X_MIN_PIN));
+  TERN_(USE_Y_MAX, _ATTACH(Y_MAX_PIN));
+  TERN_(USE_Y_MIN, _ATTACH(Y_MIN_PIN));
+  TERN_(USE_Z_MAX, _ATTACH(Z_MAX_PIN));
+  TERN_(HAS_Z_MIN_PIN, _ATTACH(Z_MIN_PIN));
+  TERN_(USE_X2_MAX, _ATTACH(X2_MAX_PIN));
+  TERN_(USE_X2_MIN, _ATTACH(X2_MIN_PIN));
+  TERN_(USE_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  TERN_(USE_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  TERN_(USE_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+  TERN_(USE_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  TERN_(USE_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  TERN_(USE_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+  TERN_(USE_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  TERN_(USE_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  TERN_(USE_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(USE_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(USE_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(USE_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(USE_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(USE_K_MIN, _ATTACH(K_MIN_PIN));
+  TERN_(USE_U_MAX, _ATTACH(U_MAX_PIN));
+  TERN_(USE_U_MIN, _ATTACH(U_MIN_PIN));
+  TERN_(USE_V_MAX, _ATTACH(V_MAX_PIN));
+  TERN_(USE_V_MIN, _ATTACH(V_MIN_PIN));
+  TERN_(USE_W_MAX, _ATTACH(W_MAX_PIN));
+  TERN_(USE_W_MIN, _ATTACH(W_MIN_PIN));
+}
@@ -0,0 +1,43 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfigPre.h"
+
+#include "HAL.h"
+#include "pinDefinitions.h"
+
+void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
+  analogWrite(pin, v);
+}
+
+void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
+  mbed::PwmOut* pwm = digitalPinToPwm(pin);
+  if (pwm != NULL) delete pwm;
+  pwm = new mbed::PwmOut(digitalPinToPinName(pin));
+  digitalPinToPwm(pin) = pwm;
+  pwm->period_ms(1000 / f_desired);
+}
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,32 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+void FastIO_init() {
+
+}
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,87 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Fast I/O interfaces for RP2040
+ * These use GPIO register access for fast port manipulation.
+ */
+
+// ------------------------
+// Public Variables
+// ------------------------
+
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void FastIO_init(); // Must be called before using fast io macros
+#define FASTIO_INIT() FastIO_init()
+
+// ------------------------
+// Defines
+// ------------------------
+
+#define _BV32(b) (1UL << (b))
+
+#ifndef PWM
+  #define PWM OUTPUT
+#endif
+
+#define _WRITE(IO, V) digitalWrite((IO), (V))
+
+#define _READ(IO)               digitalRead(IO)
+#define _TOGGLE(IO)             digitalWrite(IO, !digitalRead(IO))
+
+#define _GET_MODE(IO)
+#define _SET_MODE(IO,M)         pinMode(IO, M)
+#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               //!< Output Push Pull Mode & GPIO_NOPULL
+#define _SET_OUTPUT_OD(IO)      pinMode(IO, OUTPUT_OPEN_DRAIN)
+
+#define WRITE(IO,V)             _WRITE(IO,V)
+#define READ(IO)                _READ(IO)
+#define TOGGLE(IO)              _TOGGLE(IO)
+
+#define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE_OD(IO,V)      do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
+
+#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              //!< Input Floating Mode
+#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       //!< Input with Pull-up activation
+#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     //!< Input with Pull-down activation
+#define SET_OUTPUT(IO)          OUT_WRITE(IO, LOW)
+#define SET_PWM(IO)             _SET_MODE(IO, PWM)
+
+#define IS_INPUT(IO)
+#define IS_OUTPUT(IO)
+
+#define PWM_PIN(P)              true //digitalPinHasPWM(P)
+#define NO_COMPILE_TIME_PWM
+
+// digitalRead/Write wrappers
+#define extDigitalRead(IO)    digitalRead(IO)
+#define extDigitalWrite(IO,V) digitalWrite(IO,V)
+
+#undef I2C_SDA
+#define I2C_SDA_PIN PIN_WIRE_SDA
+#undef I2C_SCL
+#define I2C_SCL_PIN PIN_WIRE_SCL
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -0,0 +1,35 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if ALL(SDSUPPORT, USBD_USE_CDC_MSC) && DISABLED(NO_SD_HOST_DRIVE)
+  #define HAS_SD_HOST_DRIVE 1
+#endif
+
+// Fix F_CPU not being a compile-time constant in RP2040 framework
+#ifdef BOARD_F_CPU
+  #undef F_CPU
+  #define F_CPU BOARD_F_CPU
+#endif
+
+// The Sensitive Pins array is not optimizable
+#define RUNTIME_ONLY_ANALOG_TO_DIGITAL
@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// If no real or emulated EEPROM selected, fall back to SD emulation
+#if USE_FALLBACK_EEPROM
+  #define SDCARD_EEPROM_EMULATION
+#elif ANY(I2C_EEPROM, SPI_EEPROM)
+  #define USE_SHARED_EEPROM 1
+#endif
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -0,0 +1,60 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Test RP2040-specific configuration values for errors at compile-time.
+ */
+//#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
+//  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
+//#endif
+
+#if ENABLED(SDCARD_EEPROM_EMULATION) && !HAS_MEDIA
+  #undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
+  #if USE_FALLBACK_EEPROM
+    #warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
+  #endif
+  #error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
+#endif
+
+#if ENABLED(SRAM_EEPROM_EMULATION)
+  #error "SRAM_EEPROM_EMULATION is not supported for RP2040."
+#endif
+
+#if ALL(PRINTCOUNTER, FLASH_EEPROM_EMULATION)
+  #warning "FLASH_EEPROM_EMULATION may cause long delays when writing and should not be used while printing."
+  #error "Disable PRINTCOUNTER or choose another EEPROM emulation."
+#endif
+
+#if ENABLED(FLASH_EEPROM_LEVELING)
+  #error "FLASH_EEPROM_LEVELING is not supported for RP2040."
+#endif
+
+#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+  #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on RP2040."
+#elif ENABLED(SERIAL_STATS_DROPPED_RX)
+  #error "SERIAL_STATS_DROPPED_RX is not supported on RP2040."
+#endif
+
+#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI)
+  #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are not supported for RP2040."
+#endif
@@ -0,0 +1,136 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if HAS_SD_HOST_DRIVE
+
+#include "../shared/Marduino.h"
+#include "msc_sd.h"
+#include "usbd_core.h"
+
+#include "../../sd/cardreader.h"
+
+#include <USB.h>
+#include <USBMscHandler.h>
+
+#define BLOCK_SIZE 512
+#define PRODUCT_ID 0x29
+
+class Sd2CardUSBMscHandler : public USBMscHandler {
+public:
+  DiskIODriver* diskIODriver() {
+    #if HAS_MULTI_VOLUME
+      #if SHARED_VOLUME_IS(SD_ONBOARD)
+        return &card.media_driver_sdcard;
+      #elif SHARED_VOLUME_IS(USB_FLASH_DRIVE)
+        return &card.media_driver_usbFlash;
+      #endif
+    #else
+      return card.diskIODriver();
+    #endif
+  }
+
+  bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) {
+    *pBlockNum = diskIODriver()->cardSize();
+    *pBlockSize = BLOCK_SIZE;
+    return true;
+  }
+
+  bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
+    auto sd2card = diskIODriver();
+    // single block
+    if (blkLen == 1) {
+      watchdog_refresh();
+      sd2card->writeBlock(blkAddr, pBuf);
+      return true;
+    }
+
+    // multi block optimization
+    sd2card->writeStart(blkAddr, blkLen);
+    while (blkLen--) {
+      watchdog_refresh();
+      sd2card->writeData(pBuf);
+      pBuf += BLOCK_SIZE;
+    }
+    sd2card->writeStop();
+    return true;
+  }
+
+  bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
+    auto sd2card = diskIODriver();
+    // single block
+    if (blkLen == 1) {
+      watchdog_refresh();
+      sd2card->readBlock(blkAddr, pBuf);
+      return true;
+    }
+
+    // multi block optimization
+    sd2card->readStart(blkAddr);
+    while (blkLen--) {
+      watchdog_refresh();
+      sd2card->readData(pBuf);
+      pBuf += BLOCK_SIZE;
+    }
+    sd2card->readStop();
+    return true;
+  }
+
+  bool IsReady() {
+    return diskIODriver()->isReady();
+  }
+};
+
+Sd2CardUSBMscHandler usbMscHandler;
+
+/* USB Mass storage Standard Inquiry Data */
+uint8_t  Marlin_STORAGE_Inquirydata[] = { /* 36 */
+  /* LUN 0 */
+  0x00,
+  0x80,
+  0x02,
+  0x02,
+  (STANDARD_INQUIRY_DATA_LEN - 5),
+  0x00,
+  0x00,
+  0x00,
+  'M', 'A', 'R', 'L', 'I', 'N', ' ', ' ', /* Manufacturer : 8 bytes */
+  'P', 'r', 'o', 'd', 'u', 'c', 't', ' ', /* Product      : 16 Bytes */
+  ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
+  '0', '.', '0', '1',                     /* Version      : 4 Bytes */
+};
+
+USBMscHandler *pSingleMscHandler = &usbMscHandler;
+
+void MSC_SD_init() {
+  USBDevice.end();
+  delay(200);
+  USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata);
+  USBDevice.begin();
+}
+
+#endif // HAS_SD_HOST_DRIVE
+#endif // __PLAT_RP2040__
@@ -0,0 +1,24 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+void MSC_SD_init();
@@ -0,0 +1,146 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <Arduino.h>
+#include "HAL.h"
+
+#ifndef NUM_DIGITAL_PINS
+   #error "Expected NUM_DIGITAL_PINS not found"
+#endif
+
+/**
+ *  Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order)
+ *  because the variants in this platform do not always define all the I/O port/pins
+ *  that a CPU has.
+ *
+ *  VARIABLES:
+ *     Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and
+ *               digitalWrite commands and by M42.
+ *             - does not contain port/pin info
+ *             - is not in port/pin order
+ *             - typically a variant will only assign Ard_num to port/pins that are actually used
+ *     Index - M43 counter - only used to get Ard_num
+ *     x - a parameter/argument used to search the pin_array to try to find a signal name
+ *         associated with a Ard_num
+ *     Port_pin - port number and pin number for use with CPU registers and printing reports
+ *
+ *  Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num
+ *  are accessed and/or displayed.
+ *
+ *  Three arrays are used.
+ *
+ *  digitalPin[] is provided by the platform.  It consists of the Port_pin numbers in
+ *  Arduino pin number order.
+ *
+ *  pin_array is a structure generated by the pins/pinsDebug.h header file.  It is generated by
+ *  the preprocessor. Only the signals associated with enabled options are in this table.
+ *  It contains:
+ *    - name of the signal
+ *    - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines.
+ *        EXAMPLE:  "#define KILL_PIN  PB1" results in Ard_num of 57.  57 is then used as the
+ *                  argument to digitalPinToPinName(IO) to get the Port_pin number
+ *    - if it is a digital or analog signal.  PWMs are considered digital here.
+ *
+ *  pin_xref is a structure generated by this header file.  It is generated by the
+ *  preprocessor. It is in port/pin order.  It contains just the port/pin numbers defined by the
+ *  platform for this variant.
+ *    - Ard_num
+ *    - printable version of Port_pin
+ *
+ *  Routines with an "x" as a parameter/argument are used to search the pin_array to try to
+ *  find a signal name associated with a port/pin.
+ *
+ *  NOTE -  the Arduino pin number is what is used by the M42 command, NOT the port/pin for that
+ *          signal.  The Arduino pin number is listed by the M43 I command.
+ */
+
+#define NUM_ANALOG_FIRST A0
+
+#define MODE_PIN_INPUT  0 // Input mode (reset state)
+#define MODE_PIN_OUTPUT 1 // General purpose output mode
+#define MODE_PIN_ALT    2 // Alternate function mode
+#define MODE_PIN_ANALOG 3 // Analog mode
+
+#define PIN_NUM(P) (P & 0x000F)
+#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1')
+#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9)  ? ('0' + (P & 0x000F) - 10) : 0 )
+#define PORT_NUM(P) ((P  >> 4) & 0x0007)
+#define PORT_ALPHA(P) ('A' + (P  >> 4))
+
+/**
+ * Translation of routines & variables used by pinsDebug.h
+ */
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+#define VALID_PIN(ANUM) (pin_t(ANUM) >= 0 && pin_t(ANUM) < NUMBER_PINS_TOTAL)
+#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num)  // must use Arduino pin numbers when doing reads
+#define PRINT_PIN(Q)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1  // will report analog pin number in the print port routine
+
+// x is a variable used to search pin_array
+#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
+#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin)
+#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin
+
+uint8_t get_pin_mode(const pin_t Ard_num) {
+
+  uint dir = gpio_get_dir( Ard_num);
+
+  if(dir) return MODE_PIN_OUTPUT;
+  else return MODE_PIN_INPUT;
+
+}
+
+bool getValidPinMode(const pin_t Ard_num) {
+  const uint8_t pin_mode = get_pin_mode(Ard_num);
+  return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT;  // assume all alt definitions are PWM
+}
+
+int8_t digital_pin_to_analog_pin(pin_t Ard_num) {
+  Ard_num -= NUM_ANALOG_FIRST;
+  return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1;
+}
+
+bool isAnalogPin(const pin_t Ard_num) {
+  return digital_pin_to_analog_pin(Ard_num) != -1;
+}
+
+bool is_digital(const pin_t x) {
+  const uint8_t pin_mode = get_pin_mode(x);
+  return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT;
+}
+
+void printPinPort(const pin_t Ard_num) {
+  SERIAL_ECHOPGM("Pin: ");
+  SERIAL_ECHO(Ard_num);
+}
+
+bool pwm_status(const pin_t Ard_num) {
+  return get_pin_mode(Ard_num) == MODE_PIN_ALT;
+}
+
+void printPinPWM(const pin_t Ard_num) {
+  if (PWM_PIN(Ard_num)) {
+  }
+}
@@ -0,0 +1,38 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Define SPI Pins: SCK, MISO, MOSI, SS
+ */
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  PIN_SPI_SCK
+#endif
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN PIN_SPI_MISO
+#endif
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN PIN_SPI_MOSI
+#endif
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN   PIN_SPI_SS
+#endif
@@ -0,0 +1,126 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef __PLAT_RP2040__
+
+#include "../../inc/MarlinConfig.h"
+
+alarm_pool_t* HAL_timer_pool_0;
+alarm_pool_t* HAL_timer_pool_1;
+alarm_pool_t* HAL_timer_pool_2;
+alarm_pool_t* HAL_timer_pool_3;
+
+struct repeating_timer HAL_timer_0;
+struct repeating_timer HAL_timer_1;
+struct repeating_timer HAL_timer_2;
+struct repeating_timer HAL_timer_3;
+
+volatile bool HAL_timer_irq_en[4] = { false, false, false, false };
+
+void HAL_timer_init() {
+  //reserve all the available alarm pools to use as "pseudo" hardware timers
+  //HAL_timer_pool_0 = alarm_pool_create(0,2);
+  HAL_timer_pool_1 = alarm_pool_create(1, 6);
+  HAL_timer_pool_0 = HAL_timer_pool_1;
+  HAL_timer_pool_2 = alarm_pool_create(2, 6);
+  HAL_timer_pool_3 = HAL_timer_pool_2;
+  //HAL_timer_pool_3 = alarm_pool_create(3, 6);
+
+  irq_set_priority(TIMER_IRQ_0, 0xC0);
+  irq_set_priority(TIMER_IRQ_1, 0x80);
+  irq_set_priority(TIMER_IRQ_2, 0x40);
+  irq_set_priority(TIMER_IRQ_3, 0x00);
+
+  //alarm_pool_init_default();
+}
+
+void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
+  const int64_t freq = (int64_t)frequency,
+                  us = (1000000ll / freq) * -1ll;
+  bool result;
+  switch (timer_num) {
+    case 0:
+      result = alarm_pool_add_repeating_timer_us(HAL_timer_pool_0, us, HAL_timer_repeating_0_callback, NULL, &HAL_timer_0);
+      break;
+    case 1:
+      result = alarm_pool_add_repeating_timer_us(HAL_timer_pool_1, us, HAL_timer_repeating_1_callback, NULL, &HAL_timer_1);
+      break;
+    case 2:
+      result = alarm_pool_add_repeating_timer_us(HAL_timer_pool_2, us, HAL_timer_repeating_2_callback, NULL, &HAL_timer_2);
+      break;
+    case 3:
+      result = alarm_pool_add_repeating_timer_us(HAL_timer_pool_3, us, HAL_timer_repeating_3_callback, NULL, &HAL_timer_3);
+      break;
+  }
+  UNUSED(result);
+}
+
+void HAL_timer_stop(const uint8_t timer_num) {
+   switch (timer_num) {
+    case 0: cancel_repeating_timer(&HAL_timer_0); break;
+    case 1: cancel_repeating_timer(&HAL_timer_1); break;
+    case 2: cancel_repeating_timer(&HAL_timer_2); break;
+    case 3: cancel_repeating_timer(&HAL_timer_3); break;
+  }
+}
+
+int64_t HAL_timer_alarm_pool_0_callback(long int, void*) {
+  if (HAL_timer_irq_en[0]) HAL_timer_0_callback();
+  return 0;
+}
+int64_t HAL_timer_alarm_pool_1_callback(long int, void*) {
+  if (HAL_timer_irq_en[1]) HAL_timer_1_callback();
+  return 0;
+}
+int64_t HAL_timer_alarm_pool_2_callback(long int, void*) {
+  if (HAL_timer_irq_en[2]) HAL_timer_2_callback();
+  return 0;
+}
+int64_t HAL_timer_alarm_pool_3_callback(long int, void*) {
+  if (HAL_timer_irq_en[3]) HAL_timer_3_callback();
+  return 0;
+}
+
+bool HAL_timer_repeating_0_callback(repeating_timer* timer) {
+  if (HAL_timer_irq_en[0]) HAL_timer_0_callback();
+  return true;
+}
+bool HAL_timer_repeating_1_callback(repeating_timer* timer) {
+  if (HAL_timer_irq_en[1]) HAL_timer_1_callback();
+  return true;
+}
+bool HAL_timer_repeating_2_callback(repeating_timer* timer) {
+  if (HAL_timer_irq_en[2]) HAL_timer_2_callback();
+  return true;
+}
+bool HAL_timer_repeating_3_callback(repeating_timer* timer) {
+  if (HAL_timer_irq_en[3]) HAL_timer_3_callback();
+  return true;
+}
+
+void __attribute__((weak)) HAL_timer_0_callback() {}
+void __attribute__((weak)) HAL_timer_1_callback() {}
+void __attribute__((weak)) HAL_timer_2_callback() {}
+void __attribute__((weak)) HAL_timer_3_callback() {}
+
+#endif // __PLAT_RP2040__
@@ -0,0 +1,177 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include <stdint.h>
+
+#include "../../core/macros.h"
+
+#ifdef PICO_TIME_DEFAULT_ALARM_POOL_DISABLED
+  #undef PICO_TIME_DEFAULT_ALARM_POOL_DISABLED
+  #define PICO_TIME_DEFAULT_ALARM_POOL_DISABLED 0
+#else
+  #define PICO_TIME_DEFAULT_ALARM_POOL_DISABLED 0
+#endif
+
+// ------------------------
+// Defines
+// ------------------------
+
+//#define _HAL_TIMER(T) _CAT(LPC_TIM, T)
+//#define _HAL_TIMER_IRQ(T) TIMER##T##_IRQn
+//#define __HAL_TIMER_ISR(T) extern "C" alarm_callback_t HAL_timer_alarm_pool_##T##_callback()
+#define __HAL_TIMER_ISR(T) extern void HAL_timer_##T##_callback()
+#define _HAL_TIMER_ISR(T)  __HAL_TIMER_ISR(T)
+
+typedef uint64_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFFFFFFFFFFFFFF
+
+#define HAL_TIMER_RATE         (1000000ull)  // fixed value as we use a microsecond timesource
+#ifndef MF_TIMER_STEP
+  #define MF_TIMER_STEP        0  // Timer Index for Stepper
+#endif
+#ifndef MF_TIMER_PULSE
+  #define MF_TIMER_PULSE       MF_TIMER_STEP
+#endif
+#ifndef MF_TIMER_TEMP
+  #define MF_TIMER_TEMP        1  // Timer Index for Temperature
+#endif
+#ifndef MF_TIMER_PWM
+  #define MF_TIMER_PWM         3  // Timer Index for PWM
+#endif
+
+#define TEMP_TIMER_RATE        HAL_TIMER_RATE
+#define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
+
+#define STEPPER_TIMER_RATE     HAL_TIMER_RATE / 10 // 100khz roughly
+#define STEPPER_TIMER_TICKS_PER_US (0.1) // fixed value as we use a microsecond timesource
+#define STEPPER_TIMER_PRESCALE (10)
+
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(MF_TIMER_STEP)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_STEP)
+#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(MF_TIMER_STEP)
+
+#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(MF_TIMER_TEMP)
+#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_TEMP)
+
+#ifndef HAL_STEP_TIMER_ISR
+  #define HAL_STEP_TIMER_ISR() _HAL_TIMER_ISR(MF_TIMER_STEP)
+#endif
+#ifndef HAL_TEMP_TIMER_ISR
+  #define HAL_TEMP_TIMER_ISR() _HAL_TIMER_ISR(MF_TIMER_TEMP)
+#endif
+
+// Timer references by index
+//#define STEP_TIMER_PTR _HAL_TIMER(MF_TIMER_STEP)
+//#define TEMP_TIMER_PTR _HAL_TIMER(MF_TIMER_TEMP)
+
+extern alarm_pool_t* HAL_timer_pool_0;
+extern alarm_pool_t* HAL_timer_pool_1;
+extern alarm_pool_t* HAL_timer_pool_2;
+extern alarm_pool_t* HAL_timer_pool_3;
+
+extern struct repeating_timer HAL_timer_0;
+
+void HAL_timer_0_callback();
+void HAL_timer_1_callback();
+void HAL_timer_2_callback();
+void HAL_timer_3_callback();
+
+int64_t HAL_timer_alarm_pool_0_callback(long int, void*);
+int64_t HAL_timer_alarm_pool_1_callback(long int, void*);
+int64_t HAL_timer_alarm_pool_2_callback(long int, void*);
+int64_t HAL_timer_alarm_pool_3_callback(long int, void*);
+
+bool HAL_timer_repeating_0_callback(repeating_timer* timer);
+bool HAL_timer_repeating_1_callback(repeating_timer* timer);
+bool HAL_timer_repeating_2_callback(repeating_timer* timer);
+bool HAL_timer_repeating_3_callback(repeating_timer* timer);
+
+extern volatile bool HAL_timer_irq_en[4];
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_timer_init();
+void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
+void HAL_timer_stop(const uint8_t timer_num);
+
+FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, hal_timer_t compare) {
+
+  if (timer_num == MF_TIMER_STEP){
+    if (compare == HAL_TIMER_TYPE_MAX){
+       HAL_timer_stop(timer_num);
+       return;
+    }
+  }
+
+ compare = compare *10; //Dirty fix, figure out a proper way
+
+  switch (timer_num) {
+    case 0:
+      alarm_pool_add_alarm_in_us(HAL_timer_pool_0 ,compare , HAL_timer_alarm_pool_0_callback ,0 ,false );
+      break;
+
+    case 1:
+      alarm_pool_add_alarm_in_us(HAL_timer_pool_1 ,compare , HAL_timer_alarm_pool_1_callback ,0 ,false );
+      break;
+
+    case 2:
+      alarm_pool_add_alarm_in_us(HAL_timer_pool_2 ,compare , HAL_timer_alarm_pool_2_callback ,0 ,false );
+      break;
+
+    case 3:
+      alarm_pool_add_alarm_in_us(HAL_timer_pool_3 ,compare , HAL_timer_alarm_pool_3_callback ,0 ,false );
+      break;
+  }
+}
+
+FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
+  return 0;
+}
+
+FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
+  if (timer_num == MF_TIMER_STEP) return 0ull;
+  return time_us_64();
+}
+
+
+FORCE_INLINE static void HAL_timer_enable_interrupt(const uint8_t timer_num) {
+  HAL_timer_irq_en[timer_num] = 1;
+}
+
+FORCE_INLINE static void HAL_timer_disable_interrupt(const uint8_t timer_num) {
+  HAL_timer_irq_en[timer_num] = 0;
+}
+
+FORCE_INLINE static bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
+  return HAL_timer_irq_en[timer_num]; //lucky coincidence that timer_num and rp2040 irq num matches
+}
+
+FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
+  return;
+}
+
+#define HAL_timer_isr_epilogue(T) NOOP
@@ -107,7 +107,7 @@ void MarlinHAL::init() {
    #if HAS_SD_DETECT && SD_CONNECTION_IS(ONBOARD)
      SET_INPUT_PULLUP(SD_DETECT_PIN);
    #endif
-    OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
+    OUT_WRITE(SD_SS_PIN, HIGH);  // Try to set SDSS inactive before any other SPI users start up
  #endif
 }

@@ -36,11 +36,11 @@
 // ------------------------
 // Serial ports
 // ------------------------
+
 #include "../../core/serial_hook.h"
 typedef ForwardSerial1Class< decltype(SerialUSB) > DefaultSerial1;
 extern DefaultSerial1 MSerialUSB;

-// Serial ports
 typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
 typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;

@@ -51,43 +51,10 @@ extern DefaultSerial3 MSerial1;
 #define _MSERIAL(X) __MSERIAL(X)
 #define MSERIAL(X) _MSERIAL(INCREMENT(X))

-#if WITHIN(SERIAL_PORT, 0, 1)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#elif SERIAL_PORT == -1
-  #define MYSERIAL1 MSerialUSB
-#else
-  #error "SERIAL_PORT must be -1 (Native USB only)."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if WITHIN(SERIAL_PORT_2, 0, 1)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT)
-  #elif SERIAL_PORT_2 == -1
-    #define MYSERIAL2 MSerialUSB
-  #else
-    #error "SERIAL_PORT_2 must be -1 (Native USB only)."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 1)
-    #define MMU2_SERIAL MSERIAL(SERIAL_PORT)
-  #elif MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL MSerialUSB
-  #else
-    #error "MMU2_SERIAL_PORT must be -1 (Native USB only)."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 1)
-    #define LCD_SERIAL MSERIAL(SERIAL_PORT)
-  #elif LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL MSerialUSB
-  #else
-    #error "LCD_SERIAL_PORT must be -1 (Native USB only)."
-  #endif
-#endif
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 1
+#define USB_SERIAL_PORT(...) MSerialUSB
+#include "../shared/serial_ports.h"

 typedef int8_t pin_t;

@@ -108,7 +108,6 @@
    SPI.beginTransaction(spiConfig);
    SPI.transfer(buf, nbyte);
    SPI.endTransaction();
-
  }

  /**
@@ -22,41 +22,57 @@
 #pragma once

 /**
- * SAMD21 HAL developed by Bart Meijer (brupje)
- * Based on SAMD51 HAL by Giuliano Zaro (AKA GMagician)
+ * Pins Debugging for SAMD21
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
 */

 #define NUMBER_PINS_TOTAL PINS_COUNT

-#define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PORT(p) do{ SERIAL_ECHOPGM("  Port: "); sprintf_P(buffer, PSTR("%c%02ld"), 'A' + g_APinDescription[p].ulPort, g_APinDescription[p].ulPin); SERIAL_ECHO(buffer); }while (0)
+#define digitalRead_mod(P) extDigitalRead(P)
 #define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
-#define getPinByIndex(p) pin_array[p].pin
-#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
-#define isValidPin(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL)
-#define isAnalogPin(P) (digitalPinToAnalogIndex(P)!=-1)
-#define pwm_status(pin) digitalPinHasPWM(pin)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) != -1)
+#define pwm_status(P) digitalPinHasPWM(P)
 #define MULTI_NAME_PAD 27 // space needed to be pretty if not first name assigned to a pin

 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
 // uses pin index
 #define M43_NEVER_TOUCH(Q) ((Q) >= 75)

-bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(const int8_t pin) {  // 1: output, 0: input
  const EPortType samdport = g_APinDescription[pin].ulPort;
  const uint32_t samdpin = g_APinDescription[pin].ulPin;
  return PORT->Group[samdport].DIR.reg & MASK(samdpin) || (PORT->Group[samdport].PINCFG[samdpin].reg & (PORT_PINCFG_INEN | PORT_PINCFG_PULLEN)) == PORT_PINCFG_PULLEN;
 }

-void printPinPWM(int32_t pin) {
+void printPinPWM(const int32_t pin) {
  if (pwm_status(pin)) {
    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
    //SERIAL_ECHOPGM("PWM = ", duty);
  }
 }

+void printPinPort(const pin_t) {}
+
 /**
 * SAMD21 Board pin|  PORT  | Label
 * ----------------+--------+-------
--- a/Show More
+++ b/Show More