Initial Commit

Co-authored-by: Scott Lahteine <github@thinkyhead.com>

.github/workflows/test-builds.yml

@@ -56,29 +56,31 @@ jobs:
 
         # STM32F1 (Maple) Environments
 
-        - STM32F103RC_btt
-        - STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
+        #- STM32F103RC_btt_maple
+        - STM32F103RC_btt_USB_maple
         - STM32F103RC_fysetc
         - STM32F103RC_meeb
         - jgaurora_a5s_a1
         - STM32F103VE_longer
-        - mks_robin
+        #- mks_robin_maple
         - mks_robin_lite
         - mks_robin_pro
-        - STM32F103RET6_creality
-        - mks_robin_nano35
+        #- mks_robin_nano35_maple
+        #- STM32F103RET6_creality_maple
 
         # STM32 (ST) Environments
 
-        - STM32F103RC_btt_stm32
+        - STM32F103RC_btt
+        #- STM32F103RC_btt_USB
+        - STM32F103RE_btt
+        - STM32F103RE_btt_USB
+        - STM32F103RET6_creality
         - STM32F407VE_black
         - STM32F401VE_STEVAL
         - BIGTREE_BTT002
         - BIGTREE_SKR_PRO
         - BIGTREE_GTR_V1_0
-        - mks_robin_stm32
+        - mks_robin
         - ARMED
         - FYSETC_S6
         - STM32F070CB_malyan
@@ -88,7 +90,7 @@ jobs:
         - rumba32
         - LERDGEX
         - LERDGEK
-        - mks_robin_nano35_stm32
+        - mks_robin_nano35
         - NUCLEO_F767ZI
         - REMRAM_V1
         - BTT_SKR_SE_BX

Marlin/Configuration.h

@@ -35,7 +35,7 @@
  *
  * Advanced settings can be found in Configuration_adv.h
  */
-#define CONFIGURATION_H_VERSION 02000801
+#define CONFIGURATION_H_VERSION 02000900
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -66,11 +66,19 @@
 //
 //===========================================================================
 
+//===========================================================================
+//=========================== FOAMCUTTER_XYUV ==============================
+//===========================================================================
+// For a hot wire cutter with parallel horizontal axes X, I where the hights
+// of the two wire ends are controlled by parallel axes Y, J.
+//
+//#define FOAMCUTTER_XYUV
+
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "Insanity Automation" // Who made the changes.
-//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
+#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes.
+#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
  * *** VENDORS PLEASE READ ***
@@ -87,7 +95,7 @@
 #define SHOW_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Bootscreen.h on startup.
-//#define SHOW_CUSTOM_BOOTSCREEN
+#define SHOW_CUSTOM_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
 //#define CUSTOM_STATUS_SCREEN_IMAGE
@@ -139,7 +147,7 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_ORTUR_4
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
@@ -149,6 +157,45 @@
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
 
+/**
+ * Define the number of coordinated linear axes.
+ * See https://github.com/DerAndere1/Marlin/wiki
+ * Each linear axis gets its own stepper control and endstop:
+ *
+ *   Steppers: *_STEP_PIN, *_ENABLE_PIN, *_DIR_PIN, *_ENABLE_ON
+ *   Endstops: *_STOP_PIN, USE_*MIN_PLUG, USE_*MAX_PLUG
+ *       Axes: *_MIN_POS, *_MAX_POS, INVERT_*_DIR
+ *    Planner: DEFAULT_AXIS_STEPS_PER_UNIT, DEFAULT_MAX_FEEDRATE
+ *             DEFAULT_MAX_ACCELERATION, AXIS_RELATIVE_MODES,
+ *             MICROSTEP_MODES, MANUAL_FEEDRATE
+ *
+ * :[3, 4, 5, 6]
+ */
+//#define LINEAR_AXES 3
+
+/**
+ * Axis codes for additional axes:
+ * This defines the axis code that is used in G-code commands to
+ * reference a specific axis.
+ * 'A' for rotational axis parallel to X
+ * 'B' for rotational axis parallel to Y
+ * 'C' for rotational axis parallel to Z
+ * 'U' for secondary linear axis parallel to X
+ * 'V' for secondary linear axis parallel to Y
+ * 'W' for secondary linear axis parallel to Z
+ * Regardless of the settings, firmware-internal axis IDs are
+ * I (AXIS4), J (AXIS5), K (AXIS6).
+ */
+#if LINEAR_AXES >= 4
+  #define AXIS4_NAME 'A' // :['A', 'B', 'C', 'U', 'V', 'W']
+#endif
+#if LINEAR_AXES >= 5
+  #define AXIS5_NAME 'B' // :['A', 'B', 'C', 'U', 'V', 'W']
+#endif
+#if LINEAR_AXES >= 6
+  #define AXIS6_NAME 'C' // :['A', 'B', 'C', 'U', 'V', 'W']
+#endif
+
 // @section extruder
 
 // This defines the number of extruders
@@ -450,11 +497,11 @@
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
 #define TEMP_RESIDENCY_TIME         5  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW                  2  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_WINDOW                  3  // (°C) Temperature proximity for the "temperature reached" timer
 #define TEMP_HYSTERESIS              3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_BED_RESIDENCY_TIME     5  // (seconds) Time to wait for bed to "settle" in M190
-#define TEMP_BED_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_BED_WINDOW              2  // (°C) Temperature proximity for the "temperature reached" timer
 #define TEMP_BED_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_CHAMBER_RESIDENCY_TIME 10  // (seconds) Time to wait for chamber to "settle" in M191
@@ -477,7 +524,7 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 275
+#define HEATER_0_MAXTEMP 305
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -485,7 +532,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      120
+#define BED_MAXTEMP      150
 #define CHAMBER_MAXTEMP  60
 
 /**
@@ -522,9 +569,9 @@
     #define DEFAULT_Ki_LIST {   1.08,   1.08 }
     #define DEFAULT_Kd_LIST { 114.00, 114.00 }
   #else
-    #define DEFAULT_Kp  22.20
-    #define DEFAULT_Ki   1.08
-    #define DEFAULT_Kd 114.00
+    #define DEFAULT_Kp  19.0
+    #define DEFAULT_Ki   1.47
+    #define DEFAULT_Kd 61.00
   #endif
 #endif // PIDTEMP
 
@@ -563,9 +610,9 @@
 
   // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define DEFAULT_bedKp 87.23
-  #define DEFAULT_bedKi 13.31
-  #define DEFAULT_bedKd 381.14
+  #define DEFAULT_bedKp 195.13
+  #define DEFAULT_bedKi 29.05
+  #define DEFAULT_bedKd 873.85
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
@@ -691,9 +738,15 @@
 #define USE_XMIN_PLUG
 #define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
+//#define USE_IMIN_PLUG
+//#define USE_JMIN_PLUG
+//#define USE_KMIN_PLUG
 //#define USE_XMAX_PLUG
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
+//#define USE_IMAX_PLUG
+//#define USE_JMAX_PLUG
+//#define USE_KMAX_PLUG
 
 // Enable pullup for all endstops to prevent a floating state
 #define ENDSTOPPULLUPS
@@ -702,9 +755,15 @@
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
+  //#define ENDSTOPPULLUP_IMAX
+  //#define ENDSTOPPULLUP_JMAX
+  //#define ENDSTOPPULLUP_KMAX
   //#define ENDSTOPPULLUP_XMIN
   //#define ENDSTOPPULLUP_YMIN
   //#define ENDSTOPPULLUP_ZMIN
+  //#define ENDSTOPPULLUP_IMIN
+  //#define ENDSTOPPULLUP_JMIN
+  //#define ENDSTOPPULLUP_KMIN
   //#define ENDSTOPPULLUP_ZMIN_PROBE
 #endif
 
@@ -715,9 +774,15 @@
   //#define ENDSTOPPULLDOWN_XMAX
   //#define ENDSTOPPULLDOWN_YMAX
   //#define ENDSTOPPULLDOWN_ZMAX
+  //#define ENDSTOPPULLDOWN_IMAX
+  //#define ENDSTOPPULLDOWN_JMAX
+  //#define ENDSTOPPULLDOWN_KMAX
   //#define ENDSTOPPULLDOWN_XMIN
   //#define ENDSTOPPULLDOWN_YMIN
   //#define ENDSTOPPULLDOWN_ZMIN
+  //#define ENDSTOPPULLDOWN_IMIN
+  //#define ENDSTOPPULLDOWN_JMIN
+  //#define ENDSTOPPULLDOWN_KMIN
   //#define ENDSTOPPULLDOWN_ZMIN_PROBE
 #endif
 
@@ -725,10 +790,16 @@
 #define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define Y_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
 #define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
+#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
+#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define K_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
 
 /**
  * Stepper Drivers
@@ -756,6 +827,9 @@
 //#define Z2_DRIVER_TYPE A4988
 //#define Z3_DRIVER_TYPE A4988
 //#define Z4_DRIVER_TYPE A4988
+//#define I_DRIVER_TYPE  A4988
+//#define J_DRIVER_TYPE  A4988
+//#define K_DRIVER_TYPE  A4988
 #define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
@@ -809,16 +883,16 @@
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
- *                                      X, Y, Z, E0 [, E1[, E2...]]
+ *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 95 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 106.09 }
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
- *                                      X, Y, Z, E0 [, E1[, E2...]]
+ *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 500, 500, 10, 65 }
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 15, 75 }
 
 //#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -829,9 +903,9 @@
  * Default Max Acceleration (change/s) change = mm/s
  * (Maximum start speed for accelerated moves)
  * Override with M201
- *                                      X, Y, Z, E0 [, E1[, E2...]]
+ *                                      X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 2500, 2500, 18000, 8000 }
+#define DEFAULT_MAX_ACCELERATION      { 1500, 1500, 100, 10000 }
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -846,9 +920,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          2000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  2000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION          750    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   750    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -860,9 +934,12 @@
  */
 #define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK 15.0
-  #define DEFAULT_YJERK 15.0
+  #define DEFAULT_XJERK 10.0
+  #define DEFAULT_YJERK 10.0
   #define DEFAULT_ZJERK  0.3
+  //#define DEFAULT_IJERK  0.3
+  //#define DEFAULT_JJERK  0.3
+  //#define DEFAULT_KJERK  0.3
 
   //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
 
@@ -911,7 +988,7 @@
  * The probe replaces the Z-MIN endstop and is used for Z homing.
  * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
  */
-//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
 // Force the use of the probe for Z-axis homing
 //#define USE_PROBE_FOR_Z_HOMING
@@ -945,13 +1022,13 @@
  * Use G29 repeatedly, adjusting the Z height at each point with movement commands
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
-//#define PROBE_MANUALLY
+#define PROBE_MANUALLY
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
  *   (e.g., an inductive probe or a nozzle-based probe-switch.)
  */
-#define FIX_MOUNTED_PROBE
+//#define FIX_MOUNTED_PROBE
 
 /**
  * Use the nozzle as the probe, as with a conductive
@@ -1060,17 +1137,17 @@
  *     |    [-]    |
  *     O-- FRONT --+
  */
-#define NOZZLE_TO_PROBE_OFFSET { -25, 0, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define PROBING_MARGIN 8
+#define PROBING_MARGIN 10
 
 // X and Y axis travel speed (mm/min) between probes
 #define XY_PROBE_FEEDRATE (133*60)
 
 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_FEEDRATE_FAST (10*60)
+#define Z_PROBE_FEEDRATE_FAST (4*60)
 
 // Feedrate (mm/min) for the "accurate" probe of each point
 #define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
@@ -1111,7 +1188,7 @@
  * A total of 2 does fast/slow probes with a weighted average.
  * A total of 3 or more adds more slow probes, taking the average.
  */
-#define MULTIPLE_PROBING 2
+//#define MULTIPLE_PROBING 2
 //#define EXTRA_PROBING    1
 
 /**
@@ -1128,16 +1205,16 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   5 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 #define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
 //#define Z_AFTER_PROBING           5 // Z position after probing is done
 
-#define Z_PROBE_LOW_POINT          -4 // Farthest distance below the trigger-point to go before stopping
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN -9
-#define Z_PROBE_OFFSET_RANGE_MAX 9
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
@@ -1177,12 +1254,18 @@
 #define Y_ENABLE_ON 0
 #define Z_ENABLE_ON 0
 #define E_ENABLE_ON 0 // For all extruders
+//#define I_ENABLE_ON 0
+//#define J_ENABLE_ON 0
+//#define K_ENABLE_ON 0
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
 #define DISABLE_X false
 #define DISABLE_Y false
 #define DISABLE_Z false
+//#define DISABLE_I false
+//#define DISABLE_J false
+//#define DISABLE_K false
 
 // Turn off the display blinking that warns about possible accuracy reduction
 //#define DISABLE_REDUCED_ACCURACY_WARNING
@@ -1195,9 +1278,12 @@
 // @section machine
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true
 #define INVERT_Y_DIR true
-#define INVERT_Z_DIR true
+#define INVERT_Z_DIR false
+//#define INVERT_I_DIR false
+//#define INVERT_J_DIR false
+//#define INVERT_K_DIR false
 
 // @section extruder
 
@@ -1233,20 +1319,29 @@
 #define X_HOME_DIR -1
 #define Y_HOME_DIR -1
 #define Z_HOME_DIR -1
+//#define I_HOME_DIR -1
+//#define J_HOME_DIR -1
+//#define K_HOME_DIR -1
 
 // @section machine
 
 // The size of the printable area
-#define X_BED_SIZE 255
-#define Y_BED_SIZE 300
+#define X_BED_SIZE 310
+#define Y_BED_SIZE 310
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS -10.5
-#define Y_MIN_POS -9
+#define X_MIN_POS -10
+#define Y_MIN_POS -10
 #define Z_MIN_POS 0
-#define X_MAX_POS 260
-#define Y_MAX_POS 310
-#define Z_MAX_POS 295
+#define X_MAX_POS X_BED_SIZE
+#define Y_MAX_POS Y_BED_SIZE
+#define Z_MAX_POS 400
+//#define I_MIN_POS 0
+//#define I_MAX_POS 50
+//#define J_MIN_POS 0
+//#define J_MAX_POS 50
+//#define K_MIN_POS 0
+//#define K_MAX_POS 50
 
 /**
  * Software Endstops
@@ -1263,6 +1358,9 @@
   #define MIN_SOFTWARE_ENDSTOP_X
   #define MIN_SOFTWARE_ENDSTOP_Y
   #define MIN_SOFTWARE_ENDSTOP_Z
+  #define MIN_SOFTWARE_ENDSTOP_I
+  #define MIN_SOFTWARE_ENDSTOP_J
+  #define MIN_SOFTWARE_ENDSTOP_K
 #endif
 
 // Max software endstops constrain movement within maximum coordinate bounds
@@ -1271,6 +1369,9 @@
   #define MAX_SOFTWARE_ENDSTOP_X
   #define MAX_SOFTWARE_ENDSTOP_Y
   #define MAX_SOFTWARE_ENDSTOP_Z
+  #define MAX_SOFTWARE_ENDSTOP_I
+  #define MAX_SOFTWARE_ENDSTOP_J
+  #define MAX_SOFTWARE_ENDSTOP_K
 #endif
 
 #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
@@ -1294,6 +1395,7 @@
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
   #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
   #define NUM_RUNOUT_SENSORS   1          // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+  #define FIL_RUNOUT_PIN       2
 
   #define FIL_RUNOUT_STATE     LOW        // Pin state indicating that filament is NOT present.
   #define FIL_RUNOUT_PULLUP               // Use internal pullup for filament runout pins.
@@ -1407,7 +1509,7 @@
 /**
  * Auto-leveling needs preheating
  */
-#define PREHEAT_BEFORE_LEVELING
+//#define PREHEAT_BEFORE_LEVELING
 #if ENABLED(PREHEAT_BEFORE_LEVELING)
   #define LEVELING_NOZZLE_TEMP 120   // (°C) Only applies to E0 at this time
   #define LEVELING_BED_TEMP     50
@@ -1431,7 +1533,7 @@
   // The height can be set with M420 Z<height>
   #define ENABLE_LEVELING_FADE_HEIGHT
   #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-    #define DEFAULT_LEVELING_FADE_HEIGHT 0.0 // (mm) Default fade height.
+    #define DEFAULT_LEVELING_FADE_HEIGHT 00.0 // (mm) Default fade height.
   #endif
 
   // For Cartesian machines, instead of dividing moves on mesh boundaries,
@@ -1443,7 +1545,7 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION
+  #define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
     #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
     #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for G26.
@@ -1469,13 +1571,13 @@
 
     // Beyond the probed grid, continue the implied tilt?
     // Default is to maintain the height of the nearest edge.
-    //#define EXTRAPOLATE_BEYOND_GRID
+    #define EXTRAPOLATE_BEYOND_GRID
 
     //
     // Experimental Subdivision of the grid by Catmull-Rom method.
     // Synthesizes intermediate points to produce a more detailed mesh.
     //
-    //#define ABL_BILINEAR_SUBDIVISION
+    #define ABL_BILINEAR_SUBDIVISION
     #if ENABLED(ABL_BILINEAR_SUBDIVISION)
       // Number of subdivisions between probe points
       #define BILINEAR_SUBDIVISIONS 3
@@ -1511,8 +1613,8 @@
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
+  #define MESH_INSET 5          // Set Mesh bounds as an inset region of the bed
+  #define GRID_MAX_POINTS_X 5    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
@@ -1532,18 +1634,18 @@
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-#define LEVEL_BED_CORNERS
+//#define LEVEL_BED_CORNERS
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
   #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
   #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
   //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
-  #define LEVEL_CORNERS_USE_PROBE
+  //#define LEVEL_CORNERS_USE_PROBE
   #if ENABLED(LEVEL_CORNERS_USE_PROBE)
     #define LEVEL_CORNERS_PROBE_TOLERANCE 0.1
     #define LEVEL_CORNERS_VERIFY_RAISED   // After adjustment triggers the probe, re-probe to verify
-    #define LEVEL_CORNERS_AUDIO_FEEDBACK
+    //#define LEVEL_CORNERS_AUDIO_FEEDBACK
   #endif
 
   /**
@@ -1582,6 +1684,9 @@
 //#define MANUAL_X_HOME_POS 0
 //#define MANUAL_Y_HOME_POS 0
 //#define MANUAL_Z_HOME_POS 0
+//#define MANUAL_I_HOME_POS 0
+//#define MANUAL_J_HOME_POS 0
+//#define MANUAL_K_HOME_POS 0
 
 // Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
 //
@@ -1824,11 +1929,20 @@
 /**
  * Print Job Timer
  *
- * Automatically start and stop the print job timer on M104/M109/M190.
+ * Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191.
+ * The print job timer will only be stopped if the bed/chamber target temp is
+ * below BED_MINTEMP/CHAMBER_MINTEMP.
  *
- *   M104 (hotend, no wait) - high temp = none,        low temp = stop timer
- *   M109 (hotend, wait)    - high temp = start timer, low temp = stop timer
- *   M190 (bed, wait)       - high temp = start timer, low temp = none
+ *   M104 (hotend, no wait)  - high temp = none,        low temp = stop timer
+ *   M109 (hotend, wait)     - high temp = start timer, low temp = stop timer
+ *   M140 (bed, no wait)     - high temp = none,        low temp = stop timer
+ *   M190 (bed, wait)        - high temp = start timer, low temp = none
+ *   M141 (chamber, no wait) - high temp = none,        low temp = stop timer
+ *   M191 (chamber, wait)    - high temp = start timer, low temp = none
+ *
+ * For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2.
+ * For M140/M190, high temp is anything over BED_MINTEMP.
+ * For M141/M191, high temp is anything over CHAMBER_MINTEMP.
  *
  * The timer can also be controlled with the following commands:
  *
@@ -1988,7 +2102,7 @@
 //
 //  Set this option if CLOCKWISE causes values to DECREASE
 //
-#define REVERSE_ENCODER_DIRECTION
+//#define REVERSE_ENCODER_DIRECTION
 
 //
 // This option reverses the encoder direction for navigating LCD menus.
@@ -2019,7 +2133,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-#define SPEAKER
+//#define SPEAKER
 
 //
 // The duration and frequency for the UI feedback sound.
@@ -2690,7 +2804,7 @@
 //#define NEOPIXEL_LED
 #if ENABLED(NEOPIXEL_LED)
   #define NEOPIXEL_TYPE   NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
-  #define NEOPIXEL_PIN     4       // LED driving pin
+  //#define NEOPIXEL_PIN     4     // LED driving pin
   //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
   //#define NEOPIXEL2_PIN    5
   #define NEOPIXEL_PIXELS 30       // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.)
@@ -2708,10 +2822,11 @@
     //#define NEOPIXEL2_INSERIES      // Default behavior is NeoPixel 2 in parallel
   #endif
 
-  // Use a single NeoPixel LED for static (background) lighting
-  //#define NEOPIXEL_BKGD_LED_INDEX  0               // Index of the LED to use
-  //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
-  //#define NEOPIXEL_BKGD_ALWAYS_ON                  // Keep the backlight on when other NeoPixels are off
+  // Use some of the NeoPixel LEDs for static (background) lighting
+  //#define NEOPIXEL_BKGD_INDEX_FIRST  0              // Index of the first background LED
+  //#define NEOPIXEL_BKGD_INDEX_LAST   5              // Index of the last background LED
+  //#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 }  // R, G, B, W
+  //#define NEOPIXEL_BKGD_ALWAYS_ON                   // Keep the backlight on when other NeoPixels are off
 #endif
 
 /**

Marlin/Configuration_adv.h

@@ -30,7 +30,7 @@
  *
  * Basic settings can be found in Configuration.h
  */
-#define CONFIGURATION_ADV_H_VERSION 02000801
+#define CONFIGURATION_ADV_H_VERSION 02000900
 
 //===========================================================================
 //============================= Thermal Settings ============================
@@ -238,7 +238,7 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
+  #define THERMAL_PROTECTION_PERIOD 60        // Seconds
   #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
 
   #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
@@ -259,7 +259,7 @@
    * below 2.
    */
   #define WATCH_TEMP_PERIOD  20               // Seconds
-  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
+  #define WATCH_TEMP_INCREASE 2              // Degrees Celsius
 #endif
 
 /**
@@ -648,7 +648,7 @@
 //
 // For Z set the number of stepper drivers
 //
-#define NUM_Z_STEPPER_DRIVERS 2   // (1-4) Z options change based on how many
+#define NUM_Z_STEPPER_DRIVERS 1   // (1-4) Z options change based on how many
 
 #if NUM_Z_STEPPER_DRIVERS > 1
   // Enable if Z motor direction signals are the opposite of Z1
@@ -821,7 +821,7 @@
  * Z Steppers Auto-Alignment
  * Add the G34 command to align multiple Z steppers using a bed probe.
  */
-#define Z_STEPPER_AUTO_ALIGN
+//#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
   // If not defined, probe limits will be used.
@@ -918,6 +918,9 @@
 #define INVERT_X_STEP_PIN false
 #define INVERT_Y_STEP_PIN false
 #define INVERT_Z_STEP_PIN false
+#define INVERT_I_STEP_PIN false
+#define INVERT_J_STEP_PIN false
+#define INVERT_K_STEP_PIN false
 #define INVERT_E_STEP_PIN false
 
 /**
@@ -929,6 +932,9 @@
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // Set 'false' if the nozzle could fall onto your printed part!
+#define DISABLE_INACTIVE_I true
+#define DISABLE_INACTIVE_J true
+#define DISABLE_INACTIVE_K true
 #define DISABLE_INACTIVE_E true
 
 // Default Minimum Feedrates for printing and travel moves
@@ -969,8 +975,8 @@
 #if ENABLED(BACKLASH_COMPENSATION)
   // Define values for backlash distance and correction.
   // If BACKLASH_GCODE is enabled these values are the defaults.
-  #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
-  #define BACKLASH_CORRECTION    0.1       // 0.0 = no correction; 1.0 = full correction
+  #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm) One value for each linear axis
+  #define BACKLASH_CORRECTION    0.02       // 0.0 = no correction; 1.0 = full correction
 
   // Add steps for motor direction changes on CORE kinematics
   //#define CORE_BACKLASH
@@ -984,7 +990,7 @@
 
   #if ENABLED(BACKLASH_GCODE)
     // Measure the Z backlash when probing (G29) and set with "M425 Z"
-    #define MEASURE_BACKLASH_WHEN_PROBING
+    //#define MEASURE_BACKLASH_WHEN_PROBING
 
     #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
       // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
@@ -1040,6 +1046,13 @@
   #define CALIBRATION_MEASURE_LEFT
   #define CALIBRATION_MEASURE_BACK
 
+  //#define CALIBRATION_MEASURE_IMIN
+  //#define CALIBRATION_MEASURE_IMAX
+  //#define CALIBRATION_MEASURE_JMIN
+  //#define CALIBRATION_MEASURE_JMAX
+  //#define CALIBRATION_MEASURE_KMIN
+  //#define CALIBRATION_MEASURE_KMAX
+
   // Probing at the exact top center only works if the center is flat. If
   // probing on a screwhead or hollow washer, probe near the edges.
   //#define CALIBRATION_MEASURE_AT_TOP_EDGES
@@ -1303,7 +1316,7 @@
 
   //#define MEDIA_MENU_AT_TOP               // Force the media menu to be listed on the top of the main menu
 
-  #define EVENT_GCODE_SD_ABORT "G28XY"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
+  #define EVENT_GCODE_SD_ABORT "M84"      // G-code to run on SD Abort Print (e.g., "G28XY" or "G27")
 
   #if ENABLED(PRINTER_EVENT_LEDS)
     #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
@@ -1813,12 +1826,12 @@
     #endif
   #endif
 
-  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
 
-  #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
     //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    #define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+    //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
   #endif
 #endif
 
@@ -2166,7 +2179,7 @@
 // Therefore some clients abort after 30 seconds in a timeout.
 // Some other clients start sending commands while receiving a 'wait'.
 // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
-//#define NO_TIMEOUTS 1000 // Milliseconds
+#define NO_TIMEOUTS 1000 // Milliseconds
 
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
 #define ADVANCED_OK
@@ -2236,6 +2249,13 @@
     //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X"   // Extra G-code to run after tool-change
   #endif
 
+  /**
+   * Extra G-code to run while executing tool-change commands. Can be used to use an additional
+   * stepper motor (I axis, see option LINEAR_AXES in Configuration.h) to drive the tool-changer.
+   */
+  //#define EVENT_GCODE_TOOLCHANGE_T0 "G28 A\nG1 I0" // Extra G-code to run while executing tool-change command T0
+  //#define EVENT_GCODE_TOOLCHANGE_T1 "G1 A10"       // Extra G-code to run while executing tool-change command T1
+
   /**
    * Tool Sensors detect when tools have been picked up or dropped.
    * Requires the pins TOOL_SENSOR1_PIN, TOOL_SENSOR2_PIN, etc.
@@ -2345,7 +2365,7 @@
   #define FILAMENT_UNLOAD_PURGE_FEEDRATE      25  // (mm/s) feedrate to purge before unload
 
   #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
-  #define FILAMENT_CHANGE_ALERT_BEEPS         2  // Number of alert beeps to play when a response is needed.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
   #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
@@ -2413,6 +2433,24 @@
     #define Z4_MICROSTEPS       Z_MICROSTEPS
   #endif
 
+  #if AXIS_DRIVER_TYPE_I(TMC26X)
+    #define I_MAX_CURRENT    1000
+    #define I_SENSE_RESISTOR   91
+    #define I_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_J(TMC26X)
+    #define J_MAX_CURRENT    1000
+    #define J_SENSE_RESISTOR   91
+    #define J_MICROSTEPS       16
+  #endif
+
+  #if AXIS_DRIVER_TYPE_K(TMC26X)
+    #define K_MAX_CURRENT    1000
+    #define K_SENSE_RESISTOR   91
+    #define K_MICROSTEPS       16
+  #endif
+
   #if AXIS_DRIVER_TYPE_E0(TMC26X)
     #define E0_MAX_CURRENT    1000
     #define E0_SENSE_RESISTOR   91
@@ -2563,6 +2601,33 @@
     //#define Z4_INTERPOLATE true
   #endif
 
+  #if AXIS_IS_TMC(I)
+    #define I_CURRENT      800
+    #define I_CURRENT_HOME I_CURRENT
+    #define I_MICROSTEPS    16
+    #define I_RSENSE         0.11
+    #define I_CHAIN_POS     -1
+    //#define I_INTERPOLATE  true
+  #endif
+
+  #if AXIS_IS_TMC(J)
+    #define J_CURRENT      800
+    #define J_CURRENT_HOME J_CURRENT
+    #define J_MICROSTEPS    16
+    #define J_RSENSE         0.11
+    #define J_CHAIN_POS     -1
+    //#define J_INTERPOLATE  true
+  #endif
+
+  #if AXIS_IS_TMC(K)
+    #define K_CURRENT      800
+    #define K_CURRENT_HOME K_CURRENT
+    #define K_MICROSTEPS    16
+    #define K_RSENSE         0.11
+    #define K_CHAIN_POS     -1
+    //#define K_INTERPOLATE  true
+  #endif
+
   #if AXIS_IS_TMC(E0)
     #define E0_CURRENT      800
     #define E0_MICROSTEPS    16
@@ -2638,6 +2703,10 @@
   //#define Y2_CS_PIN         -1
   //#define Z2_CS_PIN         -1
   //#define Z3_CS_PIN         -1
+  //#define Z4_CS_PIN         -1
+  //#define I_CS_PIN          -1
+  //#define J_CS_PIN          -1
+  //#define K_CS_PIN          -1
   //#define E0_CS_PIN         -1
   //#define E1_CS_PIN         -1
   //#define E2_CS_PIN         -1
@@ -2677,6 +2746,9 @@
   //#define Z2_SLAVE_ADDRESS 0
   //#define Z3_SLAVE_ADDRESS 0
   //#define Z4_SLAVE_ADDRESS 0
+  //#define  I_SLAVE_ADDRESS 0
+  //#define  J_SLAVE_ADDRESS 0
+  //#define  K_SLAVE_ADDRESS 0
   //#define E0_SLAVE_ADDRESS 0
   //#define E1_SLAVE_ADDRESS 0
   //#define E2_SLAVE_ADDRESS 0
@@ -2701,6 +2773,9 @@
    */
   #define STEALTHCHOP_XY
   #define STEALTHCHOP_Z
+  #define STEALTHCHOP_I
+  #define STEALTHCHOP_J
+  #define STEALTHCHOP_K
   #define STEALTHCHOP_E
 
   /**
@@ -2772,6 +2847,9 @@
   #define Z2_HYBRID_THRESHOLD      3
   #define Z3_HYBRID_THRESHOLD      3
   #define Z4_HYBRID_THRESHOLD      3
+  #define I_HYBRID_THRESHOLD       3
+  #define J_HYBRID_THRESHOLD       3
+  #define K_HYBRID_THRESHOLD       3
   #define E0_HYBRID_THRESHOLD     30
   #define E1_HYBRID_THRESHOLD     30
   #define E2_HYBRID_THRESHOLD     30
@@ -2818,6 +2896,9 @@
     //#define Z2_STALL_SENSITIVITY Z_STALL_SENSITIVITY
     //#define Z3_STALL_SENSITIVITY Z_STALL_SENSITIVITY
     //#define Z4_STALL_SENSITIVITY Z_STALL_SENSITIVITY
+    //#define I_STALL_SENSITIVITY  8
+    //#define J_STALL_SENSITIVITY  8
+    //#define K_STALL_SENSITIVITY  8
     //#define SPI_ENDSTOPS              // TMC2130 only
     //#define IMPROVE_HOMING_RELIABILITY
   #endif
@@ -2958,6 +3039,33 @@
     #define Z4_SLEW_RATE                 1
   #endif
 
+  #if AXIS_DRIVER_TYPE_I(L6470)
+    #define I_MICROSTEPS      128
+    #define I_OVERCURRENT    2000
+    #define I_STALLCURRENT   1500
+    #define I_MAX_VOLTAGE     127
+    #define I_CHAIN_POS        -1
+    #define I_SLEW_RATE         1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_J(L6470)
+    #define J_MICROSTEPS      128
+    #define J_OVERCURRENT    2000
+    #define J_STALLCURRENT   1500
+    #define J_MAX_VOLTAGE     127
+    #define J_CHAIN_POS        -1
+    #define J_SLEW_RATE         1
+  #endif
+
+  #if AXIS_DRIVER_TYPE_K(L6470)
+    #define K_MICROSTEPS      128
+    #define K_OVERCURRENT    2000
+    #define K_STALLCURRENT   1500
+    #define K_MAX_VOLTAGE     127
+    #define K_CHAIN_POS        -1
+    #define K_SLEW_RATE         1
+  #endif
+
   #if AXIS_IS_L64XX(E0)
     #define E0_MICROSTEPS              128
     #define E0_OVERCURRENT            2000
@@ -4001,7 +4109,7 @@
 //
 // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
 //
-#define PINS_DEBUGGING
+//#define PINS_DEBUGGING
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/Version.h

@@ -28,25 +28,25 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "2.0.8"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+#define DETAILED_BUILD_VERSION "IA_" SHORT_BUILD_VERSION
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2019-07-10"
+#define STRING_DISTRIBUTION_DATE "2021-06-05"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#define MACHINE_NAME "Insanity Automation S8"
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +54,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "github.com/InsanityAutomation"
 
 /**
  * Default generic printer UUID.
@@ -65,7 +65,7 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "marlinfw.org"
+//#define WEBSITE_URL "insanityautomation.com"
 
 /**
  * Set the vendor info the serial USB interface, if changable

Marlin/_Bootscreen.h

@@ -0,0 +1,113 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#pragma once
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+/**
+ * Made with Marlin Bitmap Converter
+ * https://marlinfw.org/tools/u8glib/converter.html
+ *
+ * This bitmap from 128x64 C/C++ data
+ */
+
+
+#define HMIJ3S_BMPWIDTH  128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B01111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11110000,B00000000,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00001111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B01111111,B11111111,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111100,B00000000,B00000000,B00000000,B00011111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111000,B00000000,B00000000,B00000000,B00001111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11110000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00011111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B11111110,B01111110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000001,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B11111000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00001111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000,B00001110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00011111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,B00000110,B00000000,B00000000,B00000000,
+  B00000000,B00000111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B00111110,B00000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111001,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11100010,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000011,B11111111,B11000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B10000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,
+  B00000000,B00001111,B11111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111100,B00000000,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00111100,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B00000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100001,B11000000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111111,B11110000,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111100,B00000000,
+  B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B00000000,
+  B00011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11100111,B11000000,
+  B00001111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11000011,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11011111,B11100001,B10000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -168,6 +168,51 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MIN_PIN);
     #endif
   #endif
+  #if HAS_I_MAX
+    #if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
+      pciSetup(I_MAX_PIN);
+    #endif
+  #elif HAS_I_MIN
+    #if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
+      pciSetup(I_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_J_MAX
+    #if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
+      pciSetup(J_MAX_PIN);
+    #endif
+  #elif HAS_J_MIN
+    #if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
+      pciSetup(J_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_K_MAX
+    #if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
+      pciSetup(K_MAX_PIN);
+    #endif
+  #elif HAS_K_MIN
+    #if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
+      pciSetup(K_MIN_PIN);
+    #endif
+  #endif
   #if HAS_X2_MAX
     #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MAX_PIN);
@@ -256,6 +301,5 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif
-
   // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -64,4 +64,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/ESP32/endstop_interrupts.h

@@ -59,4 +59,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/LPC1768/endstop_interrupts.h

@@ -122,4 +122,37 @@ void setup_endstop_interrupts() {
     #endif
     _ATTACH(Z_MIN_PROBE_PIN);
   #endif
+  #if HAS_I_MAX
+    #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
+      #error "I_MAX_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(I_MAX_PIN);
+  #elif HAS_I_MIN
+    #if !LPC1768_PIN_INTERRUPT_M(I_MIN_PIN)
+      #error "I_MIN_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(I_MIN_PIN);
+  #endif
+  #if HAS_J_MAX
+    #if !LPC1768_PIN_INTERRUPT_M(J_MAX_PIN)
+      #error "J_MAX_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(J_MAX_PIN);
+  #elif HAS_J_MIN
+    #if !LPC1768_PIN_INTERRUPT_M(J_MIN_PIN)
+      #error "J_MIN_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(J_MIN_PIN);
+  #endif
+  #if HAS_K_MAX
+    #if !LPC1768_PIN_INTERRUPT_M(K_MAX_PIN)
+      #error "K_MAX_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(K_MAX_PIN);
+  #elif HAS_K_MIN
+    #if !LPC1768_PIN_INTERRUPT_M(K_MIN_PIN)
+      #error "K_MIN_PIN is not INTERRUPT-capable."
+    #endif
+    _ATTACH(K_MIN_PIN);
+  #endif
 }

Marlin/src/HAL/SAMD51/endstop_interrupts.h

@@ -47,80 +47,38 @@
 
 #include "../../module/endstops.h"
 
-#define MATCH_EILINE(P1,P2)     (P1 != P2 && PIN_TO_EILINE(P1) == PIN_TO_EILINE(P2))
-#if HAS_X_MAX
-  #define MATCH_X_MAX_EILINE(P) MATCH_EILINE(P, X_MAX_PIN)
-#else
-  #define MATCH_X_MAX_EILINE(P) false
-#endif
-#if HAS_X_MIN
-  #define MATCH_X_MIN_EILINE(P) MATCH_EILINE(P, X_MIN_PIN)
-#else
-  #define MATCH_X_MIN_EILINE(P) false
-#endif
-#if HAS_Y_MAX
-   #define MATCH_Y_MAX_EILINE(P) MATCH_EILINE(P, Y_MAX_PIN)
-#else
-   #define MATCH_Y_MAX_EILINE(P) false
-#endif
-#if HAS_Y_MIN
-  #define MATCH_Y_MIN_EILINE(P) MATCH_EILINE(P, Y_MIN_PIN)
-#else
-  #define MATCH_Y_MIN_EILINE(P) false
-#endif
-#if HAS_Z_MAX
-   #define MATCH_Z_MAX_EILINE(P) MATCH_EILINE(P, Z_MAX_PIN)
-#else
-  #define MATCH_Z_MAX_EILINE(P) false
-#endif
-#if HAS_Z_MIN
-  #define MATCH_Z_MIN_EILINE(P) MATCH_EILINE(P, Z_MIN_PIN)
-#else
-  #define MATCH_Z_MIN_EILINE(P) false
-#endif
-#if HAS_Z2_MAX
-  #define MATCH_Z2_MAX_EILINE(P) MATCH_EILINE(P, Z2_MAX_PIN)
-#else
-  #define MATCH_Z2_MAX_EILINE(P) false
-#endif
-#if HAS_Z2_MIN
-  #define MATCH_Z2_MIN_EILINE(P) MATCH_EILINE(P, Z2_MIN_PIN)
-#else
-  #define MATCH_Z2_MIN_EILINE(P) false
-#endif
-#if HAS_Z3_MAX
-  #define MATCH_Z3_MAX_EILINE(P) MATCH_EILINE(P, Z3_MAX_PIN)
-#else
-  #define MATCH_Z3_MAX_EILINE(P) false
-#endif
-#if HAS_Z3_MIN
-  #define MATCH_Z3_MIN_EILINE(P) MATCH_EILINE(P, Z3_MIN_PIN)
-#else
-  #define MATCH_Z3_MIN_EILINE(P) false
-#endif
-#if HAS_Z4_MAX
-  #define MATCH_Z4_MAX_EILINE(P) MATCH_EILINE(P, Z4_MAX_PIN)
-#else
-  #define MATCH_Z4_MAX_EILINE(P) false
-#endif
-#if HAS_Z4_MIN
-  #define MATCH_Z4_MIN_EILINE(P) MATCH_EILINE(P, Z4_MIN_PIN)
-#else
-  #define MATCH_Z4_MIN_EILINE(P) false
-#endif
-#if HAS_Z_MIN_PROBE_PIN
-  #define MATCH_Z_MIN_PROBE_EILINE(P)   MATCH_EILINE(P, Z_MIN_PROBE_PIN)
-#else
-  #define MATCH_Z_MIN_PROBE_EILINE(P) false
-#endif
-#define AVAILABLE_EILINE(P)     (PIN_TO_EILINE(P) != -1                                 \
-                                 && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)    \
-                                 && !MATCH_Y_MAX_EILINE(P) && !MATCH_Y_MIN_EILINE(P)    \
-                                 && !MATCH_Z_MAX_EILINE(P) && !MATCH_Z_MIN_EILINE(P)    \
-                                 && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P)  \
-                                 && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P)  \
-                                 && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P)  \
-                                 && !MATCH_Z_MIN_PROBE_EILINE(P))
+#define MATCH_EILINE(P1,P2) (P1 != P2 && PIN_TO_EILINE(P1) == PIN_TO_EILINE(P2))
+#define MATCH_X_MAX_EILINE(P)   TERN0(HAS_X_MAX,  DEFER4(MATCH_EILINE)(P, X_MAX_PIN))
+#define MATCH_X_MIN_EILINE(P)   TERN0(HAS_X_MIN,  DEFER4(MATCH_EILINE)(P, X_MIN_PIN))
+#define MATCH_Y_MAX_EILINE(P)   TERN0(HAS_Y_MAX,  DEFER4(MATCH_EILINE)(P, Y_MAX_PIN))
+#define MATCH_Y_MIN_EILINE(P)   TERN0(HAS_Y_MIN,  DEFER4(MATCH_EILINE)(P, Y_MIN_PIN))
+#define MATCH_Z_MAX_EILINE(P)   TERN0(HAS_Z_MAX,  DEFER4(MATCH_EILINE)(P, Z_MAX_PIN))
+#define MATCH_Z_MIN_EILINE(P)   TERN0(HAS_Z_MIN,  DEFER4(MATCH_EILINE)(P, Z_MIN_PIN))
+#define MATCH_I_MAX_EILINE(P)   TERN0(HAS_I_MAX,  DEFER4(MATCH_EILINE)(P, I_MAX_PIN))
+#define MATCH_I_MIN_EILINE(P)   TERN0(HAS_I_MIN,  DEFER4(MATCH_EILINE)(P, I_MIN_PIN))
+#define MATCH_J_MAX_EILINE(P)   TERN0(HAS_J_MAX,  DEFER4(MATCH_EILINE)(P, J_MAX_PIN))
+#define MATCH_J_MIN_EILINE(P)   TERN0(HAS_J_MIN,  DEFER4(MATCH_EILINE)(P, J_MIN_PIN))
+#define MATCH_K_MAX_EILINE(P)   TERN0(HAS_K_MAX,  DEFER4(MATCH_EILINE)(P, K_MAX_PIN))
+#define MATCH_K_MIN_EILINE(P)   TERN0(HAS_K_MIN,  DEFER4(MATCH_EILINE)(P, K_MIN_PIN))
+#define MATCH_Z2_MAX_EILINE(P)  TERN0(HAS_Z2_MAX, DEFER4(MATCH_EILINE)(P, Z2_MAX_PIN))
+#define MATCH_Z2_MIN_EILINE(P)  TERN0(HAS_Z2_MIN, DEFER4(MATCH_EILINE)(P, Z2_MIN_PIN))
+#define MATCH_Z3_MAX_EILINE(P)  TERN0(HAS_Z3_MAX, DEFER4(MATCH_EILINE)(P, Z3_MAX_PIN))
+#define MATCH_Z3_MIN_EILINE(P)  TERN0(HAS_Z3_MIN, DEFER4(MATCH_EILINE)(P, Z3_MIN_PIN))
+#define MATCH_Z4_MAX_EILINE(P)  TERN0(HAS_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
+#define MATCH_Z4_MIN_EILINE(P)  TERN0(HAS_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
+#define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(HAS_Z_MIN_PROBE_PIN, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
+
+#define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1    \
+  && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)   \
+  && !MATCH_Y_MAX_EILINE(P) && !MATCH_Y_MIN_EILINE(P)   \
+  && !MATCH_Z_MAX_EILINE(P) && !MATCH_Z_MIN_EILINE(P)   \
+  && !MATCH_I_MAX_EILINE(P) && !MATCH_I_MIN_EILINE(P)   \
+  && !MATCH_J_MAX_EILINE(P) && !MATCH_J_MIN_EILINE(P)   \
+  && !MATCH_K_MAX_EILINE(P) && !MATCH_K_MIN_EILINE(P)   \
+  && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
+  && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
+  && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
+  && !MATCH_Z_MIN_PROBE_EILINE(P) )
 
 // One ISR for all EXT-Interrupts
 void endstop_ISR() { endstops.update(); }
@@ -204,5 +162,37 @@ void setup_endstop_interrupts() {
       #error "Z_MIN_PROBE_PIN has no EXTINT line available."
     #endif
     _ATTACH(Z_MIN_PROBE_PIN);
+  #elif HAS_I_MAX
+    #if !AVAILABLE_EILINE(I_MAX_PIN)
+      #error "I_MAX_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(I_MAX_PIN, endstop_ISR, CHANGE);
+  #elif HAS_I_MIN
+    #if !AVAILABLE_EILINE(I_MIN_PIN)
+      #error "I_MIN_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(I_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_J_MAX
+    #if !AVAILABLE_EILINE(J_MAX_PIN)
+      #error "J_MAX_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(J_MAX_PIN, endstop_ISR, CHANGE);
+  #elif HAS_J_MIN
+    #if !AVAILABLE_EILINE(J_MIN_PIN)
+      #error "J_MIN_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(J_MIN_PIN, endstop_ISR, CHANGE);
+  #endif
+  #if HAS_K_MAX
+    #if !AVAILABLE_EILINE(K_MAX_PIN)
+      #error "K_MAX_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(K_MAX_PIN, endstop_ISR, CHANGE);
+  #elif HAS_K_MIN
+    #if !AVAILABLE_EILINE(K_MIN_PIN)
+      #error "K_MIN_PIN has no EXTINT line available."
+    #endif
+    attachInterrupt(K_MIN_PIN, endstop_ISR, CHANGE);
   #endif
 }

Marlin/src/HAL/STM32/eeprom_bl24cxx.cpp

@@ -0,0 +1,82 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef STM32F1
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(IIC_BL24CXX_EEPROM)
+
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"
+
+//
+// PersistentStore
+//
+
+#ifndef MARLIN_EEPROM_SIZE
+  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
+#endif
+
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+
+bool PersistentStore::access_start()  { eeprom_init(); return true; }
+bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
+  while (size--) {
+    uint8_t v = *value;
+    uint8_t * const p = (uint8_t * const)pos;
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
+      eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t c = eeprom_read_byte(p);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // IIC_BL24CXX_EEPROM
+#endif // STM32F1

Marlin/src/HAL/STM32/eeprom_if_iic.cpp

@@ -0,0 +1,54 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Platform-independent Arduino functions for I2C EEPROM.
+ * Enable USE_SHARED_EEPROM if not supplied by the framework.
+ */
+
+#ifdef STM32F1
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(IIC_BL24CXX_EEPROM)
+
+#include "../../libs/BL24CXX.h"
+#include "../shared/eeprom_if.h"
+
+void eeprom_init() { BL24CXX::init(); }
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void eeprom_write_byte(uint8_t *pos, uint8_t value) {
+  const unsigned eeprom_address = (unsigned)pos;
+  return BL24CXX::writeOneByte(eeprom_address, value);
+}
+
+uint8_t eeprom_read_byte(uint8_t *pos) {
+  const unsigned eeprom_address = (unsigned)pos;
+  return BL24CXX::readOneByte(eeprom_address);
+}
+
+#endif // IIC_BL24CXX_EEPROM
+#endif // STM32F1

Marlin/src/HAL/STM32/endstop_interrupts.h

@@ -46,4 +46,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/STM32/inc/Conditionals_adv.h

@@ -21,7 +21,7 @@
  */
 #pragma once
 
-#if defined(USBD_USE_CDC_MSC) && DISABLED(NO_SD_HOST_DRIVE)
+#if BOTH(SDSUPPORT, USBD_USE_CDC_MSC) && DISABLED(NO_SD_HOST_DRIVE)
   #define HAS_SD_HOST_DRIVE 1
 #endif
 

Marlin/src/HAL/STM32F1/MarlinSerial.cpp

@@ -167,6 +167,15 @@ constexpr bool IsSerialClassAllowed(const HardwareSerial&) { return false; }
 #if AXIS_HAS_HW_SERIAL(Z4)
   CHECK_AXIS_SERIAL(Z4);
 #endif
+#if AXIS_HAS_HW_SERIAL(I)
+  CHECK_AXIS_SERIAL(I);
+#endif
+#if AXIS_HAS_HW_SERIAL(J)
+  CHECK_AXIS_SERIAL(J);
+#endif
+#if AXIS_HAS_HW_SERIAL(K)
+  CHECK_AXIS_SERIAL(K);
+#endif
 #if AXIS_HAS_HW_SERIAL(E0)
   CHECK_AXIS_SERIAL(E0);
 #endif

Marlin/src/HAL/STM32F1/build_flags.py

@@ -11,6 +11,7 @@ if __name__ == "__main__":
                     "-fsigned-char",
                     "-fno-move-loop-invariants",
                     "-fno-strict-aliasing",
+                    "-fsingle-precision-constant",
 
                     "--specs=nano.specs",
                     "--specs=nosys.specs",

Marlin/src/HAL/STM32F1/endstop_interrupts.h

@@ -71,4 +71,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/TEENSY31_32/endstop_interrupts.h

@@ -64,4 +64,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h

@@ -63,4 +63,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h

@@ -63,4 +63,10 @@ void setup_endstop_interrupts() {
   TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
   TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/MarlinCore.cpp

@@ -304,6 +304,9 @@ void enable_all_steppers() {
   ENABLE_AXIS_X();
   ENABLE_AXIS_Y();
   ENABLE_AXIS_Z();
+  ENABLE_AXIS_I(); // Marlin 6-axis support by DerAndere (https://github.com/DerAndere1/Marlin/wiki)
+  ENABLE_AXIS_J();
+  ENABLE_AXIS_K();
   enable_e_steppers();
 
   TERN_(EXTENSIBLE_UI, ExtUI::onSteppersEnabled());
@@ -317,7 +320,7 @@ void disable_e_steppers() {
 void disable_e_stepper(const uint8_t e) {
   #define _CASE_DIS_E(N) case N: DISABLE_AXIS_E##N(); break;
   switch (e) {
-    REPEAT(EXTRUDERS, _CASE_DIS_E)
+    REPEAT(E_STEPPERS, _CASE_DIS_E)
   }
 }
 
@@ -325,6 +328,9 @@ void disable_all_steppers() {
   DISABLE_AXIS_X();
   DISABLE_AXIS_Y();
   DISABLE_AXIS_Z();
+  DISABLE_AXIS_I();
+  DISABLE_AXIS_J();
+  DISABLE_AXIS_K();
   disable_e_steppers();
 
   TERN_(EXTENSIBLE_UI, ExtUI::onSteppersDisabled());
@@ -444,6 +450,9 @@ inline void manage_inactivity(const bool ignore_stepper_queue=false) {
         if (ENABLED(DISABLE_INACTIVE_X)) DISABLE_AXIS_X();
         if (ENABLED(DISABLE_INACTIVE_Y)) DISABLE_AXIS_Y();
         if (ENABLED(DISABLE_INACTIVE_Z)) DISABLE_AXIS_Z();
+        if (ENABLED(DISABLE_INACTIVE_I)) DISABLE_AXIS_I();
+        if (ENABLED(DISABLE_INACTIVE_J)) DISABLE_AXIS_J();
+        if (ENABLED(DISABLE_INACTIVE_K)) DISABLE_AXIS_K();
         if (ENABLED(DISABLE_INACTIVE_E)) disable_e_steppers();
 
         TERN_(AUTO_BED_LEVELING_UBL, ubl.steppers_were_disabled());
@@ -935,6 +944,15 @@ inline void tmc_standby_setup() {
   #if PIN_EXISTS(Z4_STDBY)
     SET_INPUT_PULLDOWN(Z4_STDBY_PIN);
   #endif
+  #if PIN_EXISTS(I_STDBY)
+    SET_INPUT_PULLDOWN(I_STDBY_PIN);
+  #endif
+  #if PIN_EXISTS(J_STDBY)
+    SET_INPUT_PULLDOWN(J_STDBY_PIN);
+  #endif
+  #if PIN_EXISTS(K_STDBY)
+    SET_INPUT_PULLDOWN(K_STDBY_PIN);
+  #endif
   #if PIN_EXISTS(E0_STDBY)
     SET_INPUT_PULLDOWN(E0_STDBY_PIN);
   #endif
@@ -1423,10 +1441,7 @@ void setup() {
   #endif
 
   #if HAS_PRUSA_MMU1
-    SETUP_LOG("Prusa MMU1");
-    SET_OUTPUT(E_MUX0_PIN);
-    SET_OUTPUT(E_MUX1_PIN);
-    SET_OUTPUT(E_MUX2_PIN);
+    SETUP_RUN(mmu_init());
   #endif
 
   #if HAS_FANMUX

Marlin/src/core/boards.h

@@ -159,6 +159,7 @@
 #define BOARD_PICA_REVB               1324  // PICA Shield (original version)
 #define BOARD_PICA                    1325  // PICA Shield (rev C or later)
 #define BOARD_INTAMSYS40              1326  // Intamsys 4.0 (Funmat HT)
+#define BOARD_MALYAN_M180             1327  // Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
 
 //
 // ATmega1281, ATmega2561
@@ -371,20 +372,21 @@
 #define BOARD_BTT_SKR_V2_0_REV_B      4212  // BigTreeTech SKR v2.0 Rev B (STM32F407VGT6)
 #define BOARD_BTT_GTR_V1_0            4213  // BigTreeTech GTR v1.0 (STM32F407IGT)
 #define BOARD_BTT_OCTOPUS_V1_0        4214  // BigTreeTech Octopus v1.0 (STM32F446ZET6)
-#define BOARD_LERDGE_K                4215  // Lerdge K (STM32F407ZG)
-#define BOARD_LERDGE_S                4216  // Lerdge S (STM32F407VE)
-#define BOARD_LERDGE_X                4217  // Lerdge X (STM32F407VE)
-#define BOARD_VAKE403D                4218  // VAkE 403D (STM32F446VET6)
-#define BOARD_FYSETC_S6               4219  // FYSETC S6 (STM32F446VET6)
-#define BOARD_FYSETC_S6_V2_0          4220  // FYSETC S6 v2.0 (STM32F446VET6)
-#define BOARD_FYSETC_SPIDER           4221  // FYSETC Spider (STM32F446VET6)
-#define BOARD_FLYF407ZG               4222  // FLYF407ZG (STM32F407ZG)
-#define BOARD_MKS_ROBIN2              4223  // MKS_ROBIN2 (STM32F407ZE)
-#define BOARD_MKS_ROBIN_PRO_V2        4224  // MKS Robin Pro V2 (STM32F407VE)
-#define BOARD_MKS_ROBIN_NANO_V3       4225  // MKS Robin Nano V3 (STM32F407VG)
-#define BOARD_ANET_ET4                4226  // ANET ET4 V1.x (STM32F407VGT6)
-#define BOARD_ANET_ET4P               4227  // ANET ET4P V1.x (STM32F407VGT6)
-#define BOARD_FYSETC_CHEETAH_V20      4228  // FYSETC Cheetah V2.0
+#define BOARD_BTT_OCTOPUS_V1_1        4215  // BigTreeTech Octopus v1.1 (STM32F446ZET6)
+#define BOARD_LERDGE_K                4216  // Lerdge K (STM32F407ZG)
+#define BOARD_LERDGE_S                4217  // Lerdge S (STM32F407VE)
+#define BOARD_LERDGE_X                4218  // Lerdge X (STM32F407VE)
+#define BOARD_VAKE403D                4219  // VAkE 403D (STM32F446VET6)
+#define BOARD_FYSETC_S6               4220  // FYSETC S6 (STM32F446VET6)
+#define BOARD_FYSETC_S6_V2_0          4221  // FYSETC S6 v2.0 (STM32F446VET6)
+#define BOARD_FYSETC_SPIDER           4222  // FYSETC Spider (STM32F446VET6)
+#define BOARD_FLYF407ZG               4223  // FLYF407ZG (STM32F407ZG)
+#define BOARD_MKS_ROBIN2              4224  // MKS_ROBIN2 (STM32F407ZE)
+#define BOARD_MKS_ROBIN_PRO_V2        4225  // MKS Robin Pro V2 (STM32F407VE)
+#define BOARD_MKS_ROBIN_NANO_V3       4226  // MKS Robin Nano V3 (STM32F407VG)
+#define BOARD_ANET_ET4                4227  // ANET ET4 V1.x (STM32F407VGT6)
+#define BOARD_ANET_ET4P               4228  // ANET ET4P V1.x (STM32F407VGT6)
+#define BOARD_FYSETC_CHEETAH_V20      4229  // FYSETC Cheetah V2.0
 
 
 //

Marlin/src/core/drivers.h

@@ -60,6 +60,9 @@
 #define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
 #define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
 #define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T)
+#define AXIS_DRIVER_TYPE_I(T) _AXIS_DRIVER_TYPE(I,T)
+#define AXIS_DRIVER_TYPE_J(T) _AXIS_DRIVER_TYPE(J,T)
+#define AXIS_DRIVER_TYPE_K(T) _AXIS_DRIVER_TYPE(K,T)
 
 #define AXIS_DRIVER_TYPE_X2(T) (EITHER(X_DUAL_STEPPER_DRIVERS, DUAL_X_CARRIAGE) && _AXIS_DRIVER_TYPE(X2,T))
 #define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T))
@@ -83,6 +86,7 @@
 #define HAS_E_DRIVER(T) (0 RREPEAT2(E_STEPPERS, _OR_ADTE, T))
 
 #define HAS_DRIVER(T) (  AXIS_DRIVER_TYPE_X(T)  || AXIS_DRIVER_TYPE_Y(T)  || AXIS_DRIVER_TYPE_Z(T)  \
+                      || AXIS_DRIVER_TYPE_I(T)  || AXIS_DRIVER_TYPE_J(T)  || AXIS_DRIVER_TYPE_K(T)  \
                       || AXIS_DRIVER_TYPE_X2(T) || AXIS_DRIVER_TYPE_Y2(T) || AXIS_DRIVER_TYPE_Z2(T) \
                       || AXIS_DRIVER_TYPE_Z3(T) || AXIS_DRIVER_TYPE_Z4(T) || HAS_E_DRIVER(T) )
 
@@ -153,9 +157,11 @@
 #define _OR_EAH(N,T)    || AXIS_HAS_##T(E##N)
 #define E_AXIS_HAS(T)   (0 _OR_EAH(0,T) _OR_EAH(1,T) _OR_EAH(2,T) _OR_EAH(3,T) _OR_EAH(4,T) _OR_EAH(5,T) _OR_EAH(6,T) _OR_EAH(7,T))
 
-#define ANY_AXIS_HAS(T) (    AXIS_HAS_##T(X)  || AXIS_HAS_##T(Y)  || AXIS_HAS_##T(Z)  \
-                          || AXIS_HAS_##T(X2) || AXIS_HAS_##T(Y2) || AXIS_HAS_##T(Z2) \
-                          || AXIS_HAS_##T(Z3) || AXIS_HAS_##T(Z4) || E_AXIS_HAS(T) )
+#define ANY_AXIS_HAS(T) (    AXIS_HAS_##T(X) || AXIS_HAS_##T(X2) \
+                          || AXIS_HAS_##T(Y) || AXIS_HAS_##T(Y2) \
+                          || AXIS_HAS_##T(Z) || AXIS_HAS_##T(Z2) || AXIS_HAS_##T(Z3) || AXIS_HAS_##T(Z4) \
+                          || AXIS_HAS_##T(I) || AXIS_HAS_##T(J)  || AXIS_HAS_##T(K) \
+                          || E_AXIS_HAS(T) )
 
 #if ANY_AXIS_HAS(STEALTHCHOP)
   #define HAS_STEALTHCHOP 1

Marlin/src/core/language.h

@@ -266,18 +266,25 @@
 #define STR_X_MAX                           "x_max"
 #define STR_X2_MIN                          "x2_min"
 #define STR_X2_MAX                          "x2_max"
-#define STR_Y_MIN                           "y_min"
-#define STR_Y_MAX                           "y_max"
-#define STR_Y2_MIN                          "y2_min"
-#define STR_Y2_MAX                          "y2_max"
-#define STR_Z_MIN                           "z_min"
-#define STR_Z_MAX                           "z_max"
-#define STR_Z2_MIN                          "z2_min"
-#define STR_Z2_MAX                          "z2_max"
-#define STR_Z3_MIN                          "z3_min"
-#define STR_Z3_MAX                          "z3_max"
-#define STR_Z4_MIN                          "z4_min"
-#define STR_Z4_MAX                          "z4_max"
+
+#if HAS_Y_AXIS
+  #define STR_Y_MIN                         "y_min"
+  #define STR_Y_MAX                         "y_max"
+  #define STR_Y2_MIN                        "y2_min"
+  #define STR_Y2_MAX                        "y2_max"
+#endif
+
+#if HAS_Z_AXIS
+  #define STR_Z_MIN                         "z_min"
+  #define STR_Z_MAX                         "z_max"
+  #define STR_Z2_MIN                        "z2_min"
+  #define STR_Z2_MAX                        "z2_max"
+  #define STR_Z3_MIN                        "z3_min"
+  #define STR_Z3_MAX                        "z3_max"
+  #define STR_Z4_MIN                        "z4_min"
+  #define STR_Z4_MAX                        "z4_max"
+#endif
+
 #define STR_Z_PROBE                         "z_probe"
 #define STR_PROBE_EN                        "probe_en"
 #define STR_FILAMENT_RUNOUT_SENSOR          "filament"
@@ -286,6 +293,9 @@
 #define STR_X "X"
 #define STR_Y "Y"
 #define STR_Z "Z"
+#define STR_I AXIS4_STR
+#define STR_J AXIS5_STR
+#define STR_K AXIS6_STR
 #define STR_E "E"
 #if IS_KINEMATIC
   #define STR_A "A"
@@ -305,8 +315,114 @@
 #define LCD_STR_A STR_A
 #define LCD_STR_B STR_B
 #define LCD_STR_C STR_C
+#define LCD_STR_I STR_I
+#define LCD_STR_J STR_J
+#define LCD_STR_K STR_K
 #define LCD_STR_E STR_E
 
+// Extra Axis and Endstop Names
+#if LINEAR_AXES >= 4
+  #if AXIS4_NAME == 'A'
+    #define AXIS4_STR "A"
+    #define STR_I_MIN "a_min"
+    #define STR_I_MAX "a_max"
+  #elif AXIS4_NAME == 'B'
+    #define AXIS4_STR "B"
+    #define STR_I_MIN "b_min"
+    #define STR_I_MAX "b_max"
+  #elif AXIS4_NAME == 'C'
+    #define AXIS4_STR "C"
+    #define STR_I_MIN "c_min"
+    #define STR_I_MAX "c_max"
+  #elif AXIS4_NAME == 'U'
+    #define AXIS4_STR "U"
+    #define STR_I_MIN "u_min"
+    #define STR_I_MAX "u_max"
+  #elif AXIS4_NAME == 'V'
+    #define AXIS4_STR "V"
+    #define STR_I_MIN "v_min"
+    #define STR_I_MAX "v_max"
+  #elif AXIS4_NAME == 'W'
+    #define AXIS4_STR "W"
+    #define STR_I_MIN "w_min"
+    #define STR_I_MAX "w_max"
+  #else
+    #define AXIS4_STR "A"
+    #define STR_I_MIN "a_min"
+    #define STR_I_MAX "a_max"
+  #endif
+#else
+  #define AXIS4_STR   ""
+#endif
+
+#if LINEAR_AXES >= 5
+  #if AXIS5_NAME == 'A'
+    #define AXIS5_STR "A"
+    #define STR_J_MIN "a_min"
+    #define STR_J_MAX "a_max"
+  #elif AXIS5_NAME == 'B'
+    #define AXIS5_STR "B"
+    #define STR_J_MIN "b_min"
+    #define STR_J_MAX "b_max"
+  #elif AXIS5_NAME == 'C'
+    #define AXIS5_STR "C"
+    #define STR_J_MIN "c_min"
+    #define STR_J_MAX "c_max"
+  #elif AXIS5_NAME == 'U'
+    #define AXIS5_STR "U"
+    #define STR_J_MIN "u_min"
+    #define STR_J_MAX "u_max"
+  #elif AXIS5_NAME == 'V'
+    #define AXIS5_STR "V"
+    #define STR_J_MIN "v_min"
+    #define STR_J_MAX "v_max"
+  #elif AXIS5_NAME == 'W'
+    #define AXIS5_STR "W"
+    #define STR_J_MIN "w_min"
+    #define STR_J_MAX "w_max"
+  #else
+    #define AXIS5_STR "B"
+    #define STR_J_MIN "b_min"
+    #define STR_J_MAX "b_max"
+  #endif
+#else
+  #define AXIS5_STR   ""
+#endif
+
+#if LINEAR_AXES >= 6
+  #if AXIS6_NAME == 'A'
+    #define AXIS6_STR "A"
+    #define STR_K_MIN "a_min"
+    #define STR_K_MAX "a_max"
+  #elif AXIS6_NAME == 'B'
+    #define AXIS6_STR "B"
+    #define STR_K_MIN "b_min"
+    #define STR_K_MAX "b_max"
+  #elif AXIS6_NAME == 'C'
+    #define AXIS6_STR "C"
+    #define STR_K_MIN "c_min"
+    #define STR_K_MAX "c_max"
+  #elif AXIS6_NAME == 'U'
+    #define AXIS6_STR "U"
+    #define STR_K_MIN "u_min"
+    #define STR_K_MAX "u_max"
+  #elif AXIS6_NAME == 'V'
+    #define AXIS6_STR "V"
+    #define STR_K_MIN "v_min"
+    #define STR_K_MAX "v_max"
+  #elif AXIS6_NAME == 'W'
+    #define AXIS6_STR "W"
+    #define STR_K_MIN "w_min"
+    #define STR_K_MAX "w_max"
+  #else
+    #define AXIS6_STR "C"
+    #define STR_K_MIN "c_min"
+    #define STR_K_MAX "c_max"
+  #endif
+#else
+  #define AXIS6_STR   ""
+#endif
+
 #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
 
   // Custom characters defined in the first 8 characters of the LCD

Marlin/src/core/macros.h

@@ -36,12 +36,21 @@
 #define _XMIN_   100
 #define _YMIN_   200
 #define _ZMIN_   300
+#define _IMIN_   400
+#define _JMIN_   500
+#define _KMIN_   600
 #define _XMAX_   101
 #define _YMAX_   201
 #define _ZMAX_   301
+#define _IMAX_   401
+#define _JMAX_   501
+#define _KMAX_   601
 #define _XDIAG_  102
 #define _YDIAG_  202
 #define _ZDIAG_  302
+#define _IDIAG_  502
+#define _JDIAG_  602
+#define _KDIAG_  702
 #define _E0DIAG_ 400
 #define _E1DIAG_ 401
 #define _E2DIAG_ 402
@@ -195,6 +204,11 @@
 #define __TERN(T,V...)      ___TERN(_CAT(_NO,T),V)  // Prepend '_NO' to get '_NOT_0' or '_NOT_1'
 #define ___TERN(P,V...)     THIRD(P,V)              // If first argument has a comma, A. Else B.
 
+#define _OPTARG(A)          , A
+#define OPTARG(O,A)         TERN_(O,DEFER4(_OPTARG)(A))
+#define _OPTCODE(A)         A;
+#define OPTCODE(O,A)        TERN_(O,DEFER4(_OPTCODE)(A))
+
 // Macros to avoid 'f + 0.0' which is not always optimized away. Minus included for symmetry.
 // Compiler flags -fno-signed-zeros -ffinite-math-only also cover 'f * 1.0', 'f - f', etc.
 #define PLUS_TERN0(O,A)     _TERN(_ENA_1(O),,+ (A)) // OPTION ? '+ (A)' : '<nul>'

Marlin/src/core/serial.cpp

@@ -36,6 +36,10 @@ PGMSTR(X_LBL,     "X:"); PGMSTR(Y_LBL,     "Y:"); PGMSTR(Z_LBL,     "Z:"); PGMST
 PGMSTR(SP_A_STR, " A");  PGMSTR(SP_B_STR, " B");  PGMSTR(SP_C_STR, " C");
 PGMSTR(SP_X_STR, " X");  PGMSTR(SP_Y_STR, " Y");  PGMSTR(SP_Z_STR, " Z");  PGMSTR(SP_E_STR, " E");
 PGMSTR(SP_X_LBL, " X:"); PGMSTR(SP_Y_LBL, " Y:"); PGMSTR(SP_Z_LBL, " Z:"); PGMSTR(SP_E_LBL, " E:");
+PGMSTR(I_STR, AXIS4_STR);     PGMSTR(J_STR, AXIS5_STR);     PGMSTR(K_STR, AXIS6_STR);
+PGMSTR(I_LBL, AXIS4_STR ":"); PGMSTR(J_LBL, AXIS5_STR ":"); PGMSTR(K_LBL, AXIS6_STR ":");
+PGMSTR(SP_I_STR, " " AXIS4_STR);     PGMSTR(SP_J_STR, " " AXIS5_STR);     PGMSTR(SP_K_STR, " " AXIS6_STR);
+PGMSTR(SP_I_LBL, " " AXIS4_STR ":"); PGMSTR(SP_J_LBL, " " AXIS5_STR ":"); PGMSTR(SP_K_LBL, " " AXIS6_STR ":");
 
 // Hook Meatpack if it's enabled on the first leaf
 #if ENABLED(MEATPACK_ON_SERIAL_PORT_1)
@@ -101,8 +105,10 @@ void print_bin(uint16_t val) {
   }
 }
 
-void print_pos(const_float_t x, const_float_t y, const_float_t z, PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
+void print_pos(LINEAR_AXIS_ARGS(const_float_t), PGM_P const prefix/*=nullptr*/, PGM_P const suffix/*=nullptr*/) {
   if (prefix) serialprintPGM(prefix);
-  SERIAL_ECHOPAIR_P(SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z);
+  SERIAL_ECHOPAIR_P(
+    LIST_N(DOUBLE(LINEAR_AXES), SP_X_STR, x, SP_Y_STR, y, SP_Z_STR, z, SP_I_STR, i, SP_J_STR, j, SP_K_STR, k)
+  );
   if (suffix) serialprintPGM(suffix); else SERIAL_EOL();
 }

Marlin/src/core/serial.h

@@ -29,12 +29,16 @@
 #endif
 
 // Commonly-used strings in serial output
-extern const char NUL_STR[], SP_P_STR[], SP_T_STR[],
+extern const char NUL_STR[],
+                  SP_X_STR[], SP_Y_STR[], SP_Z_STR[],
+                  SP_A_STR[], SP_B_STR[], SP_C_STR[], SP_E_STR[],
+                  SP_X_LBL[], SP_Y_LBL[], SP_Z_LBL[], SP_E_LBL[],
+                  SP_I_STR[], SP_J_STR[], SP_K_STR[],
+                  SP_I_LBL[], SP_J_LBL[], SP_K_LBL[],
+                  SP_P_STR[], SP_T_STR[],
                   X_STR[], Y_STR[], Z_STR[], E_STR[],
                   X_LBL[], Y_LBL[], Z_LBL[], E_LBL[],
-                  SP_A_STR[], SP_B_STR[], SP_C_STR[],
-                  SP_X_STR[], SP_Y_STR[], SP_Z_STR[], SP_E_STR[],
-                  SP_X_LBL[], SP_Y_LBL[], SP_Z_LBL[], SP_E_LBL[];
+                  I_LBL[], J_LBL[], K_LBL[];
 
 //
 // Debugging flags for use by M111
@@ -310,10 +314,10 @@ void serialprint_truefalse(const bool tf);
 void serial_spaces(uint8_t count);
 
 void print_bin(const uint16_t val);
-void print_pos(const_float_t x, const_float_t y, const_float_t z, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr);
+void print_pos(LINEAR_AXIS_ARGS(const_float_t), PGM_P const prefix=nullptr, PGM_P const suffix=nullptr);
 
 inline void print_pos(const xyz_pos_t &xyz, PGM_P const prefix=nullptr, PGM_P const suffix=nullptr) {
-  print_pos(xyz.x, xyz.y, xyz.z, prefix, suffix);
+  print_pos(LINEAR_AXIS_ELEM(xyz), prefix, suffix);
 }
 
 #define SERIAL_POS(SUFFIX,VAR) do { print_pos(VAR, PSTR("  " STRINGIFY(VAR) "="), PSTR(" : " SUFFIX "\n")); }while(0)

Marlin/src/core/types.h

@@ -39,6 +39,32 @@ struct IF { typedef R type; };
 template <class L, class R>
 struct IF<true, L, R> { typedef L type; };
 
+#define LINEAR_AXIS_GANG(V...) GANG_N(LINEAR_AXES, V)
+#define LINEAR_AXIS_CODE(V...) CODE_N(LINEAR_AXES, V)
+#define LINEAR_AXIS_LIST(V...) LIST_N(LINEAR_AXES, V)
+#define LINEAR_AXIS_ARRAY(V...) { LINEAR_AXIS_LIST(V) }
+#define LINEAR_AXIS_ARGS(T...) LINEAR_AXIS_LIST(T x, T y, T z, T i, T j, T k)
+#define LINEAR_AXIS_ELEM(O)    LINEAR_AXIS_LIST(O.x, O.y, O.z, O.i, O.j, O.k)
+#define LINEAR_AXIS_DEFS(T,V)  LINEAR_AXIS_LIST(T x=V, T y=V, T z=V, T i=V, T j=V, T k=V)
+
+#define LOGICAL_AXIS_GANG(E,V...) LINEAR_AXIS_GANG(V) GANG_ITEM_E(E)
+#define LOGICAL_AXIS_CODE(E,V...) LINEAR_AXIS_CODE(V) CODE_ITEM_E(E)
+#define LOGICAL_AXIS_LIST(E,V...) LINEAR_AXIS_LIST(V) LIST_ITEM_E(E)
+#define LOGICAL_AXIS_ARRAY(E,V...) { LOGICAL_AXIS_LIST(E,V) }
+#define LOGICAL_AXIS_ARGS(T...) LOGICAL_AXIS_LIST(T e, T x, T y, T z, T i, T j, T k)
+#define LOGICAL_AXIS_ELEM(O)    LOGICAL_AXIS_LIST(O.e, O.x, O.y, O.z, O.i, O.j, O.k)
+#define LOGICAL_AXIS_DECL(T,V)  LOGICAL_AXIS_LIST(T e=V, T x=V, T y=V, T z=V, T i=V, T j=V, T k=V)
+
+#if HAS_EXTRUDERS
+  #define LIST_ITEM_E(N) , N
+  #define CODE_ITEM_E(N) ; N
+  #define GANG_ITEM_E(N) N
+#else
+  #define LIST_ITEM_E(N)
+  #define CODE_ITEM_E(N)
+  #define GANG_ITEM_E(N)
+#endif
+
 //
 // Enumerated axis indices
 //
@@ -47,16 +73,43 @@ struct IF<true, L, R> { typedef L type; };
 //  - X_HEAD, Y_HEAD, and Z_HEAD should be used for Steppers on Core kinematics
 //
 enum AxisEnum : uint8_t {
-  X_AXIS = 0, A_AXIS = X_AXIS,
-  Y_AXIS = 1, B_AXIS = Y_AXIS,
-  Z_AXIS = 2, C_AXIS = Z_AXIS,
-  E_AXIS,
-  X_HEAD, Y_HEAD, Z_HEAD,
-  E0_AXIS = E_AXIS,
-  E1_AXIS, E2_AXIS, E3_AXIS, E4_AXIS, E5_AXIS, E6_AXIS, E7_AXIS,
-  ALL_AXES_ENUM = 0xFE, NO_AXIS_ENUM = 0xFF
+
+  // Linear axes may be controlled directly or indirectly
+  LINEAR_AXIS_LIST(X_AXIS, Y_AXIS, Z_AXIS, I_AXIS, J_AXIS, K_AXIS)
+
+  // Extruder axes may be considered distinctly
+  #define _EN_ITEM(N) , E##N##_AXIS
+  REPEAT(EXTRUDERS, _EN_ITEM)
+  #undef _EN_ITEM
+
+  // Core also keeps toolhead directions
+  #if IS_CORE
+    , X_HEAD, Y_HEAD, Z_HEAD
+  #endif
+
+  // Distinct axes, including all E and Core
+  , NUM_AXIS_ENUMS
+
+  // Most of the time we refer only to the single E_AXIS
+  #if HAS_EXTRUDERS
+    , E_AXIS = E0_AXIS
+  #endif
+
+  // A, B, and C are for DELTA, SCARA, etc.
+  , A_AXIS = X_AXIS
+  #if LINEAR_AXES >= 2
+    , B_AXIS = Y_AXIS
+  #endif
+  #if LINEAR_AXES >= 3
+    , C_AXIS = Z_AXIS
+  #endif
+
+  // To refer to all or none
+  , ALL_AXES_ENUM = 0xFE, NO_AXIS_ENUM = 0xFF
 };
 
+typedef IF<(NUM_AXIS_ENUMS > 8), uint16_t, uint8_t>::type axis_bits_t;
+
 //
 // Loop over axes
 //
@@ -185,7 +238,7 @@ void toNative(xyz_pos_t &raw);
 void toNative(xyze_pos_t &raw);
 
 //
-// XY coordinates, counters, etc.
+// Paired XY coordinates, counters, flags, etc.
 //
 template<typename T>
 struct XYval {
@@ -194,18 +247,34 @@ struct XYval {
     struct { T a, b; };
     T pos[2];
   };
-  FI void set(const T px)                               { x = px; }
-  FI void set(const T px, const T py)                   { x = px; y = py; }
-  FI void set(const T (&arr)[XY])                       { x = arr[0]; y = arr[1]; }
-  FI void set(const T (&arr)[XYZ])                      { x = arr[0]; y = arr[1]; }
-  FI void set(const T (&arr)[XYZE])                     { x = arr[0]; y = arr[1]; }
-  #if DISTINCT_AXES > LOGICAL_AXES
-    FI void set(const T (&arr)[DISTINCT_AXES])          { x = arr[0]; y = arr[1]; }
-  #endif
+
+  // Set all to 0
   FI void reset()                                       { x = y = 0; }
+
+  // Setters taking struct types and arrays
+  FI void set(const T px)                               { x = px; }
+  #if HAS_Y_AXIS
+    FI void set(const T px, const T py)                 { x = px; y = py; }
+    FI void set(const T (&arr)[XY])                     { x = arr[0]; y = arr[1]; }
+  #endif
+  #if LINEAR_AXES > XY
+    FI void set(const T (&arr)[LINEAR_AXES])            { x = arr[0]; y = arr[1]; }
+  #endif
+  #if LOGICAL_AXES > LINEAR_AXES
+    FI void set(const T (&arr)[LOGICAL_AXES])           { x = arr[0]; y = arr[1]; }
+    #if DISTINCT_AXES > LOGICAL_AXES
+      FI void set(const T (&arr)[DISTINCT_AXES])        { x = arr[0]; y = arr[1]; }
+    #endif
+  #endif
+
+  // Length reduced to one dimension
   FI T magnitude()                                const { return (T)sqrtf(x*x + y*y); }
+  // Pointer to the data as a simple array
   FI operator T* ()                                     { return pos; }
+  // If any element is true then it's true
   FI operator bool()                                    { return x || y; }
+
+  // Explicit copy and copies with conversion
   FI XYval<T>           copy()                    const { return *this; }
   FI XYval<T>            ABS()                    const { return { T(_ABS(x)), T(_ABS(y)) }; }
   FI XYval<int16_t>    asInt()                          { return { int16_t(x), int16_t(y) }; }
@@ -217,17 +286,27 @@ struct XYval {
   FI XYval<float>    asFloat()                          { return { static_cast<float>(x), static_cast<float>(y) }; }
   FI XYval<float>    asFloat()                    const { return { static_cast<float>(x), static_cast<float>(y) }; }
   FI XYval<float> reciprocal()                    const { return {  _RECIP(x),  _RECIP(y) }; }
+
+  // Marlin workspace shifting is done with G92 and M206
   FI XYval<float>  asLogical()                    const { XYval<float> o = asFloat(); toLogical(o); return o; }
   FI XYval<float>   asNative()                    const { XYval<float> o = asFloat(); toNative(o);  return o; }
+
+  // Cast to a type with more fields by making a new object
   FI operator XYZval<T>()                               { return { x, y }; }
   FI operator XYZval<T>()                         const { return { x, y }; }
   FI operator XYZEval<T>()                              { return { x, y }; }
   FI operator XYZEval<T>()                        const { return { x, y }; }
-  FI       T&  operator[](const int i)                  { return pos[i]; }
-  FI const T&  operator[](const int i)            const { return pos[i]; }
+
+  // Accessor via an AxisEnum (or any integer) [index]
+  FI       T&  operator[](const int n)                  { return pos[n]; }
+  FI const T&  operator[](const int n)            const { return pos[n]; }
+
+  // Assignment operator overrides do the expected thing
   FI XYval<T>& operator= (const T v)                    { set(v,    v   ); return *this; }
   FI XYval<T>& operator= (const XYZval<T>  &rs)         { set(rs.x, rs.y); return *this; }
   FI XYval<T>& operator= (const XYZEval<T> &rs)         { set(rs.x, rs.y); return *this; }
+
+  // Override other operators to get intuitive behaviors
   FI XYval<T>  operator+ (const XYval<T>   &rs)   const { XYval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; return ls; }
   FI XYval<T>  operator+ (const XYval<T>   &rs)         { XYval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; return ls; }
   FI XYval<T>  operator- (const XYval<T>   &rs)   const { XYval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; return ls; }
@@ -264,6 +343,10 @@ struct XYval {
   FI XYval<T>  operator>>(const int &v)                 { XYval<T> ls = *this; _RS(ls.x);    _RS(ls.y);    return ls; }
   FI XYval<T>  operator<<(const int &v)           const { XYval<T> ls = *this; _LS(ls.x);    _LS(ls.y);    return ls; }
   FI XYval<T>  operator<<(const int &v)                 { XYval<T> ls = *this; _LS(ls.x);    _LS(ls.y);    return ls; }
+  FI const XYval<T> operator-()                   const { XYval<T> o = *this; o.x = -x; o.y = -y; return o; }
+  FI XYval<T>       operator-()                         { XYval<T> o = *this; o.x = -x; o.y = -y; return o; }
+
+  // Modifier operators
   FI XYval<T>& operator+=(const XYval<T>   &rs)         { x += rs.x; y += rs.y; return *this; }
   FI XYval<T>& operator-=(const XYval<T>   &rs)         { x -= rs.x; y -= rs.y; return *this; }
   FI XYval<T>& operator*=(const XYval<T>   &rs)         { x *= rs.x; y *= rs.y; return *this; }
@@ -277,6 +360,8 @@ struct XYval {
   FI XYval<T>& operator*=(const int &v)                 { x *= v;    y *= v;    return *this; }
   FI XYval<T>& operator>>=(const int &v)                { _RS(x);    _RS(y);    return *this; }
   FI XYval<T>& operator<<=(const int &v)                { _LS(x);    _LS(y);    return *this; }
+
+  // Exact comparisons. For floats a "NEAR" operation may be better.
   FI bool      operator==(const XYval<T>   &rs)         { return x == rs.x && y == rs.y; }
   FI bool      operator==(const XYZval<T>  &rs)         { return x == rs.x && y == rs.y; }
   FI bool      operator==(const XYZEval<T> &rs)         { return x == rs.x && y == rs.y; }
@@ -289,224 +374,291 @@ struct XYval {
   FI bool      operator!=(const XYval<T>   &rs)   const { return !operator==(rs); }
   FI bool      operator!=(const XYZval<T>  &rs)   const { return !operator==(rs); }
   FI bool      operator!=(const XYZEval<T> &rs)   const { return !operator==(rs); }
-  FI XYval<T>       operator-()                         { XYval<T> o = *this; o.x = -x; o.y = -y; return o; }
-  FI const XYval<T> operator-()                   const { XYval<T> o = *this; o.x = -x; o.y = -y; return o; }
 };
 
 //
-// XYZ coordinates, counters, etc.
+// Linear Axes coordinates, counters, flags, etc.
 //
 template<typename T>
 struct XYZval {
   union {
-    struct { T x, y, z; };
-    struct { T a, b, c; };
-    T pos[3];
+    struct { T LINEAR_AXIS_ARGS(); };
+    struct { T LINEAR_AXIS_LIST(a, b, c, u, v, w); };
+    T pos[LINEAR_AXES];
   };
+
+  // Set all to 0
+  FI void reset()                                      { LINEAR_AXIS_GANG(x =, y =, z =, i =, j =, k =) 0; }
+
+  // Setters taking struct types and arrays
   FI void set(const T px)                              { x = px; }
   FI void set(const T px, const T py)                  { x = px; y = py; }
-  FI void set(const T px, const T py, const T pz)      { x = px; y = py; z = pz; }
-  FI void set(const XYval<T> pxy, const T pz)          { x = pxy.x; y = pxy.y; z = pz; }
+  FI void set(const XYval<T> pxy)                      { x = pxy.x; y = pxy.y; }
+  FI void set(const XYval<T> pxy, const T pz)          { LINEAR_AXIS_CODE(x = pxy.x, y = pxy.y, z = pz, NOOP, NOOP, NOOP); }
   FI void set(const T (&arr)[XY])                      { x = arr[0]; y = arr[1]; }
-  FI void set(const T (&arr)[XYZ])                     { x = arr[0]; y = arr[1]; z = arr[2]; }
-  FI void set(const T (&arr)[XYZE])                    { x = arr[0]; y = arr[1]; z = arr[2]; }
-  #if DISTINCT_AXES > XYZE
-    FI void set(const T (&arr)[DISTINCT_AXES])         { x = arr[0]; y = arr[1]; z = arr[2]; }
+  #if HAS_Z_AXIS
+    FI void set(const T (&arr)[LINEAR_AXES])           { LINEAR_AXIS_CODE(x = arr[0], y = arr[1], z = arr[2], i = arr[3], j = arr[4], k = arr[5]); }
+    FI void set(LINEAR_AXIS_ARGS(const T))             { LINEAR_AXIS_CODE(a = x,      b = y,      c = z,      u = i,      v = j,      w = k    ); }
   #endif
-  FI void reset()                                      { x = y = z = 0; }
-  FI T magnitude()                               const { return (T)sqrtf(x*x + y*y + z*z); }
+  #if LOGICAL_AXES > LINEAR_AXES
+    FI void set(const T (&arr)[LOGICAL_AXES])          { LINEAR_AXIS_CODE(x = arr[0], y = arr[1], z = arr[2], i = arr[3], j = arr[4], k = arr[5]); }
+    FI void set(LOGICAL_AXIS_ARGS(const T))            { LINEAR_AXIS_CODE(a = x,      b = y,      c = z,      u = i,      v = j,      w = k    ); }
+    #if DISTINCT_AXES > LOGICAL_AXES
+      FI void set(const T (&arr)[DISTINCT_AXES])       { LINEAR_AXIS_CODE(x = arr[0], y = arr[1], z = arr[2], i = arr[3], j = arr[4], k = arr[5]); }
+    #endif
+  #endif
+  #if LINEAR_AXES >= 4
+    FI void set(const T px, const T py, const T pz)                         { x = px; y = py; z = pz; }
+  #endif
+  #if LINEAR_AXES >= 5
+    FI void set(const T px, const T py, const T pz, const T pi)             { x = px; y = py; z = pz; i = pi; }
+  #endif
+  #if LINEAR_AXES >= 6
+    FI void set(const T px, const T py, const T pz, const T pi, const T pj) { x = px; y = py; z = pz; i = pi; j = pj; }
+  #endif
+
+  // Length reduced to one dimension
+  FI T magnitude()                               const { return (T)sqrtf(LINEAR_AXIS_GANG(x*x, + y*y, + z*z, + i*i, + j*j, + k*k)); }
+  // Pointer to the data as a simple array
   FI operator T* ()                                    { return pos; }
-  FI operator bool()                                   { return z || x || y; }
+  // If any element is true then it's true
+  FI operator bool()                                   { return LINEAR_AXIS_GANG(x, || y, || z, || i, || j, || k); }
+
+  // Explicit copy and copies with conversion
   FI XYZval<T>          copy()                   const { XYZval<T> o = *this; return o; }
-  FI XYZval<T>           ABS()                   const { return { T(_ABS(x)), T(_ABS(y)), T(_ABS(z)) }; }
-  FI XYZval<int16_t>   asInt()                         { return { int16_t(x), int16_t(y), int16_t(z) }; }
-  FI XYZval<int16_t>   asInt()                   const { return { int16_t(x), int16_t(y), int16_t(z) }; }
-  FI XYZval<int32_t>  asLong()                         { return { int32_t(x), int32_t(y), int32_t(z) }; }
-  FI XYZval<int32_t>  asLong()                   const { return { int32_t(x), int32_t(y), int32_t(z) }; }
-  FI XYZval<int32_t>  ROUNDL()                         { return { int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)) }; }
-  FI XYZval<int32_t>  ROUNDL()                   const { return { int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)) }; }
-  FI XYZval<float>   asFloat()                         { return { static_cast<float>(x), static_cast<float>(y), static_cast<float>(z) }; }
-  FI XYZval<float>   asFloat()                   const { return { static_cast<float>(x), static_cast<float>(y), static_cast<float>(z) }; }
-  FI XYZval<float> reciprocal()                  const { return {  _RECIP(x),  _RECIP(y),  _RECIP(z) }; }
+  FI XYZval<T>           ABS()                   const { return LINEAR_AXIS_ARRAY(T(_ABS(x)), T(_ABS(y)), T(_ABS(z)), T(_ABS(i)), T(_ABS(j)), T(_ABS(k))); }
+  FI XYZval<int16_t>   asInt()                         { return LINEAR_AXIS_ARRAY(int16_t(x), int16_t(y), int16_t(z), int16_t(i), int16_t(j), int16_t(k)); }
+  FI XYZval<int16_t>   asInt()                   const { return LINEAR_AXIS_ARRAY(int16_t(x), int16_t(y), int16_t(z), int16_t(i), int16_t(j), int16_t(k)); }
+  FI XYZval<int32_t>  asLong()                         { return LINEAR_AXIS_ARRAY(int32_t(x), int32_t(y), int32_t(z), int32_t(i), int32_t(j), int32_t(k)); }
+  FI XYZval<int32_t>  asLong()                   const { return LINEAR_AXIS_ARRAY(int32_t(x), int32_t(y), int32_t(z), int32_t(i), int32_t(j), int32_t(k)); }
+  FI XYZval<int32_t>  ROUNDL()                         { return LINEAR_AXIS_ARRAY(int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(i)), int32_t(LROUND(j)), int32_t(LROUND(k))); }
+  FI XYZval<int32_t>  ROUNDL()                   const { return LINEAR_AXIS_ARRAY(int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(i)), int32_t(LROUND(j)), int32_t(LROUND(k))); }
+  FI XYZval<float>   asFloat()                         { return LINEAR_AXIS_ARRAY(static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(i), static_cast<float>(j), static_cast<float>(k)); }
+  FI XYZval<float>   asFloat()                   const { return LINEAR_AXIS_ARRAY(static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(i), static_cast<float>(j), static_cast<float>(k)); }
+  FI XYZval<float> reciprocal()                  const { return LINEAR_AXIS_ARRAY(_RECIP(x),  _RECIP(y),  _RECIP(z),  _RECIP(i),  _RECIP(j),  _RECIP(k)); }
+
+  // Marlin workspace shifting is done with G92 and M206
   FI XYZval<float> asLogical()                   const { XYZval<float> o = asFloat(); toLogical(o); return o; }
   FI XYZval<float>  asNative()                   const { XYZval<float> o = asFloat(); toNative(o);  return o; }
+
+  // In-place cast to types having fewer fields
   FI operator       XYval<T>&()                        { return *(XYval<T>*)this; }
   FI operator const XYval<T>&()                  const { return *(const XYval<T>*)this; }
-  FI operator       XYZEval<T>()                 const { return { x, y, z }; }
-  FI       T&   operator[](const int i)                { return pos[i]; }
-  FI const T&   operator[](const int i)          const { return pos[i]; }
-  FI XYZval<T>& operator= (const T v)                  { set(v,    v,    v   ); return *this; }
+
+  // Cast to a type with more fields by making a new object
+  FI operator       XYZEval<T>()                 const { return LINEAR_AXIS_ARRAY(x, y, z, i, j, k); }
+
+  // Accessor via an AxisEnum (or any integer) [index]
+  FI       T&   operator[](const int n)                { return pos[n]; }
+  FI const T&   operator[](const int n)          const { return pos[n]; }
+
+  // Assignment operator overrides do the expected thing
+  FI XYZval<T>& operator= (const T v)                  { set(ARRAY_N_1(LINEAR_AXES, v)); return *this; }
   FI XYZval<T>& operator= (const XYval<T>   &rs)       { set(rs.x, rs.y      ); return *this; }
-  FI XYZval<T>& operator= (const XYZEval<T> &rs)       { set(rs.x, rs.y, rs.z); return *this; }
-  FI XYZval<T>  operator+ (const XYval<T>   &rs) const { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y;               return ls; }
-  FI XYZval<T>  operator+ (const XYval<T>   &rs)       { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y;               return ls; }
-  FI XYZval<T>  operator- (const XYval<T>   &rs) const { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y;               return ls; }
-  FI XYZval<T>  operator- (const XYval<T>   &rs)       { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y;               return ls; }
-  FI XYZval<T>  operator* (const XYval<T>   &rs) const { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y;               return ls; }
-  FI XYZval<T>  operator* (const XYval<T>   &rs)       { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y;               return ls; }
-  FI XYZval<T>  operator/ (const XYval<T>   &rs) const { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y;               return ls; }
-  FI XYZval<T>  operator/ (const XYval<T>   &rs)       { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y;               return ls; }
-  FI XYZval<T>  operator+ (const XYZval<T>  &rs) const { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; return ls; }
-  FI XYZval<T>  operator+ (const XYZval<T>  &rs)       { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; return ls; }
-  FI XYZval<T>  operator- (const XYZval<T>  &rs) const { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; return ls; }
-  FI XYZval<T>  operator- (const XYZval<T>  &rs)       { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; return ls; }
-  FI XYZval<T>  operator* (const XYZval<T>  &rs) const { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; return ls; }
-  FI XYZval<T>  operator* (const XYZval<T>  &rs)       { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; return ls; }
-  FI XYZval<T>  operator/ (const XYZval<T>  &rs) const { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
-  FI XYZval<T>  operator/ (const XYZval<T>  &rs)       { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
-  FI XYZval<T>  operator+ (const XYZEval<T> &rs) const { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; return ls; }
-  FI XYZval<T>  operator+ (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; return ls; }
-  FI XYZval<T>  operator- (const XYZEval<T> &rs) const { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; return ls; }
-  FI XYZval<T>  operator- (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; return ls; }
-  FI XYZval<T>  operator* (const XYZEval<T> &rs) const { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; return ls; }
-  FI XYZval<T>  operator* (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; return ls; }
-  FI XYZval<T>  operator/ (const XYZEval<T> &rs) const { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
-  FI XYZval<T>  operator/ (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
-  FI XYZval<T>  operator* (const float &v)       const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
-  FI XYZval<T>  operator* (const float &v)             { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
-  FI XYZval<T>  operator* (const int &v)         const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
-  FI XYZval<T>  operator* (const int &v)               { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
-  FI XYZval<T>  operator/ (const float &v)       const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
-  FI XYZval<T>  operator/ (const float &v)             { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
-  FI XYZval<T>  operator/ (const int &v)         const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
-  FI XYZval<T>  operator/ (const int &v)               { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
-  FI XYZval<T>  operator>>(const int &v)         const { XYZval<T> ls = *this; _RS(ls.x); _RS(ls.y); _RS(ls.z); return ls; }
-  FI XYZval<T>  operator>>(const int &v)               { XYZval<T> ls = *this; _RS(ls.x); _RS(ls.y); _RS(ls.z); return ls; }
-  FI XYZval<T>  operator<<(const int &v)         const { XYZval<T> ls = *this; _LS(ls.x); _LS(ls.y); _LS(ls.z); return ls; }
-  FI XYZval<T>  operator<<(const int &v)               { XYZval<T> ls = *this; _LS(ls.x); _LS(ls.y); _LS(ls.z); return ls; }
-  FI XYZval<T>& operator+=(const XYval<T>   &rs)       { x += rs.x; y += rs.y;            return *this; }
-  FI XYZval<T>& operator-=(const XYval<T>   &rs)       { x -= rs.x; y -= rs.y;            return *this; }
-  FI XYZval<T>& operator*=(const XYval<T>   &rs)       { x *= rs.x; y *= rs.y;            return *this; }
-  FI XYZval<T>& operator/=(const XYval<T>   &rs)       { x /= rs.x; y /= rs.y;            return *this; }
-  FI XYZval<T>& operator+=(const XYZval<T>  &rs)       { x += rs.x; y += rs.y; z += rs.z; return *this; }
-  FI XYZval<T>& operator-=(const XYZval<T>  &rs)       { x -= rs.x; y -= rs.y; z -= rs.z; return *this; }
-  FI XYZval<T>& operator*=(const XYZval<T>  &rs)       { x *= rs.x; y *= rs.y; z *= rs.z; return *this; }
-  FI XYZval<T>& operator/=(const XYZval<T>  &rs)       { x /= rs.x; y /= rs.y; z /= rs.z; return *this; }
-  FI XYZval<T>& operator+=(const XYZEval<T> &rs)       { x += rs.x; y += rs.y; z += rs.z; return *this; }
-  FI XYZval<T>& operator-=(const XYZEval<T> &rs)       { x -= rs.x; y -= rs.y; z -= rs.z; return *this; }
-  FI XYZval<T>& operator*=(const XYZEval<T> &rs)       { x *= rs.x; y *= rs.y; z *= rs.z; return *this; }
-  FI XYZval<T>& operator/=(const XYZEval<T> &rs)       { x /= rs.x; y /= rs.y; z /= rs.z; return *this; }
-  FI XYZval<T>& operator*=(const float &v)             { x *= v;    y *= v;    z *= v;    return *this; }
-  FI XYZval<T>& operator*=(const int &v)               { x *= v;    y *= v;    z *= v;    return *this; }
-  FI XYZval<T>& operator>>=(const int &v)              { _RS(x);   _RS(y);   _RS(z);   return *this; }
-  FI XYZval<T>& operator<<=(const int &v)              { _LS(x);   _LS(y);   _LS(z);   return *this; }
-  FI bool       operator==(const XYZEval<T> &rs)       { return x == rs.x && y == rs.y && z == rs.z; }
+  FI XYZval<T>& operator= (const XYZEval<T> &rs)       { set(LINEAR_AXIS_ELEM(rs)); return *this; }
+
+  // Override other operators to get intuitive behaviors
+  FI XYZval<T>  operator+ (const XYval<T>   &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator+ (const XYval<T>   &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator- (const XYval<T>   &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator- (const XYval<T>   &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator* (const XYval<T>   &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator* (const XYval<T>   &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator/ (const XYval<T>   &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator/ (const XYval<T>   &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, NOOP        , NOOP        , NOOP        , NOOP        ); return ls; }
+  FI XYZval<T>  operator+ (const XYZval<T>  &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZval<T>  operator+ (const XYZval<T>  &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZval<T>  operator- (const XYZval<T>  &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZval<T>  operator- (const XYZval<T>  &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZval<T>  operator* (const XYZval<T>  &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZval<T>  operator* (const XYZval<T>  &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZval<T>  operator/ (const XYZval<T>  &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZval<T>  operator/ (const XYZval<T>  &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZval<T>  operator+ (const XYZEval<T> &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZval<T>  operator+ (const XYZEval<T> &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZval<T>  operator- (const XYZEval<T> &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZval<T>  operator- (const XYZEval<T> &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZval<T>  operator* (const XYZEval<T> &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZval<T>  operator* (const XYZEval<T> &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZval<T>  operator/ (const XYZEval<T> &rs) const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZval<T>  operator/ (const XYZEval<T> &rs)       { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZval<T>  operator* (const float &v)       const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZval<T>  operator* (const float &v)             { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZval<T>  operator* (const int &v)         const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZval<T>  operator* (const int &v)               { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZval<T>  operator/ (const float &v)       const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZval<T>  operator/ (const float &v)             { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZval<T>  operator/ (const int &v)         const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZval<T>  operator/ (const int &v)               { XYZval<T> ls = *this; LINEAR_AXIS_CODE(ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZval<T>  operator>>(const int &v)         const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(_RS(ls.x),    _RS(ls.y),    _RS(ls.z),    _RS(ls.i),    _RS(ls.j),    _RS(ls.k)   ); return ls; }
+  FI XYZval<T>  operator>>(const int &v)               { XYZval<T> ls = *this; LINEAR_AXIS_CODE(_RS(ls.x),    _RS(ls.y),    _RS(ls.z),    _RS(ls.i),    _RS(ls.j),    _RS(ls.k)   ); return ls; }
+  FI XYZval<T>  operator<<(const int &v)         const { XYZval<T> ls = *this; LINEAR_AXIS_CODE(_LS(ls.x),    _LS(ls.y),    _LS(ls.z),    _LS(ls.i),    _LS(ls.j),    _LS(ls.k)   ); return ls; }
+  FI XYZval<T>  operator<<(const int &v)               { XYZval<T> ls = *this; LINEAR_AXIS_CODE(_LS(ls.x),    _LS(ls.y),    _LS(ls.z),    _LS(ls.i),    _LS(ls.j),    _LS(ls.k)   ); return ls; }
+  FI const XYZval<T> operator-()                 const { XYZval<T> o = *this; LINEAR_AXIS_CODE(o.x = -x, o.y = -y, o.z = -z, o.i = -i, o.j = -j, o.k = -k); return o; }
+  FI XYZval<T>       operator-()                       { XYZval<T> o = *this; LINEAR_AXIS_CODE(o.x = -x, o.y = -y, o.z = -z, o.i = -i, o.j = -j, o.k = -k); return o; }
+
+  // Modifier operators
+  FI XYZval<T>& operator+=(const XYval<T>   &rs)       { LINEAR_AXIS_CODE(x += rs.x, y += rs.y, NOOP,      NOOP,      NOOP,      NOOP     ); return *this; }
+  FI XYZval<T>& operator-=(const XYval<T>   &rs)       { LINEAR_AXIS_CODE(x -= rs.x, y -= rs.y, NOOP,      NOOP,      NOOP,      NOOP     ); return *this; }
+  FI XYZval<T>& operator*=(const XYval<T>   &rs)       { LINEAR_AXIS_CODE(x *= rs.x, y *= rs.y, NOOP,      NOOP,      NOOP,      NOOP     ); return *this; }
+  FI XYZval<T>& operator/=(const XYval<T>   &rs)       { LINEAR_AXIS_CODE(x /= rs.x, y /= rs.y, NOOP,      NOOP,      NOOP,      NOOP     ); return *this; }
+  FI XYZval<T>& operator+=(const XYZval<T>  &rs)       { LINEAR_AXIS_CODE(x += rs.x, y += rs.y, z += rs.z, i += rs.i, j += rs.j, k += rs.k); return *this; }
+  FI XYZval<T>& operator-=(const XYZval<T>  &rs)       { LINEAR_AXIS_CODE(x -= rs.x, y -= rs.y, z -= rs.z, i -= rs.i, j -= rs.j, k -= rs.k); return *this; }
+  FI XYZval<T>& operator*=(const XYZval<T>  &rs)       { LINEAR_AXIS_CODE(x *= rs.x, y *= rs.y, z *= rs.z, i *= rs.i, j *= rs.j, k *= rs.k); return *this; }
+  FI XYZval<T>& operator/=(const XYZval<T>  &rs)       { LINEAR_AXIS_CODE(x /= rs.x, y /= rs.y, z /= rs.z, i /= rs.i, j /= rs.j, k /= rs.k); return *this; }
+  FI XYZval<T>& operator+=(const XYZEval<T> &rs)       { LINEAR_AXIS_CODE(x += rs.x, y += rs.y, z += rs.z, i += rs.i, j += rs.j, k += rs.k); return *this; }
+  FI XYZval<T>& operator-=(const XYZEval<T> &rs)       { LINEAR_AXIS_CODE(x -= rs.x, y -= rs.y, z -= rs.z, i -= rs.i, j -= rs.j, k -= rs.k); return *this; }
+  FI XYZval<T>& operator*=(const XYZEval<T> &rs)       { LINEAR_AXIS_CODE(x *= rs.x, y *= rs.y, z *= rs.z, i *= rs.i, j *= rs.j, k *= rs.k); return *this; }
+  FI XYZval<T>& operator/=(const XYZEval<T> &rs)       { LINEAR_AXIS_CODE(x /= rs.x, y /= rs.y, z /= rs.z, i /= rs.i, j /= rs.j, k /= rs.k); return *this; }
+  FI XYZval<T>& operator*=(const float &v)             { LINEAR_AXIS_CODE(x *= v,    y *= v,    z *= v,    i *= v,    j *= v,    k *= v);    return *this; }
+  FI XYZval<T>& operator*=(const int &v)               { LINEAR_AXIS_CODE(x *= v,    y *= v,    z *= v,    i *= v,    j *= v,    k *= v);    return *this; }
+  FI XYZval<T>& operator>>=(const int &v)              { LINEAR_AXIS_CODE(_RS(x),    _RS(y),    _RS(z),    _RS(i),    _RS(j),    _RS(k));    return *this; }
+  FI XYZval<T>& operator<<=(const int &v)              { LINEAR_AXIS_CODE(_LS(x),    _LS(y),    _LS(z),    _LS(i),    _LS(j),    _LS(k));    return *this; }
+
+  // Exact comparisons. For floats a "NEAR" operation may be better.
+  FI bool       operator==(const XYZEval<T> &rs)       { return true LINEAR_AXIS_GANG(&& x == rs.x, && y == rs.y, && z == rs.z, && i == rs.i, && j == rs.j, && k == rs.k); }
+  FI bool       operator==(const XYZEval<T> &rs) const { return true LINEAR_AXIS_GANG(&& x == rs.x, && y == rs.y, && z == rs.z, && i == rs.i, && j == rs.j, && k == rs.k); }
   FI bool       operator!=(const XYZEval<T> &rs)       { return !operator==(rs); }
-  FI bool       operator==(const XYZEval<T> &rs) const { return x == rs.x && y == rs.y && z == rs.z; }
   FI bool       operator!=(const XYZEval<T> &rs) const { return !operator==(rs); }
-  FI XYZval<T>       operator-()                       { XYZval<T> o = *this; o.x = -x; o.y = -y; o.z = -z; return o; }
-  FI const XYZval<T> operator-()                 const { XYZval<T> o = *this; o.x = -x; o.y = -y; o.z = -z; return o; }
 };
 
 //
-// XYZE coordinates, counters, etc.
+// Logical Axes coordinates, counters, etc.
 //
 template<typename T>
 struct XYZEval {
   union {
-    struct{ T x, y, z, e; };
-    struct{ T a, b, c; };
-    T pos[4];
+    struct { T LOGICAL_AXIS_ARGS(); };
+    struct { T LOGICAL_AXIS_LIST(_e, a, b, c, u, v, w); };
+    T pos[LOGICAL_AXES];
   };
-  FI void reset()                                             { x = y = z = e = 0; }
-  FI T magnitude()                                      const { return (T)sqrtf(x*x + y*y + z*z + e*e); }
-  FI operator T* ()                                           { return pos; }
-  FI operator bool()                                          { return e || z || x || y; }
-  FI void set(const T px)                                     { x = px;                                        }
-  FI void set(const T px, const T py)                         { x = px;     y = py;                            }
-  FI void set(const T px, const T py, const T pz)             { x = px;     y = py;     z = pz;                }
-  FI void set(const T px, const T py, const T pz, const T pe) { x = px;     y = py;     z = pz;     e = pe;    }
-  FI void set(const XYval<T> pxy)                             { x = pxy.x;  y = pxy.y;                         }
-  FI void set(const XYval<T> pxy, const T pz)                 { x = pxy.x;  y = pxy.y;  z = pz;                }
-  FI void set(const XYZval<T> pxyz)                           { x = pxyz.x; y = pxyz.y; z = pxyz.z;            }
-  FI void set(const XYval<T> pxy, const T pz, const T pe)     { x = pxy.x;  y = pxy.y;  z = pz;     e = pe;    }
-  FI void set(const XYval<T> pxy, const XYval<T> pze)         { x = pxy.x;  y = pxy.y;  z = pze.z;  e = pze.e; }
-  FI void set(const XYZval<T> pxyz, const T pe)               { x = pxyz.x; y = pxyz.y; z = pxyz.z; e = pe;    }
-  FI void set(const T (&arr)[XY])                             { x = arr[0]; y = arr[1]; }
-  FI void set(const T (&arr)[XYZ])                            { x = arr[0]; y = arr[1]; z = arr[2]; }
-  FI void set(const T (&arr)[XYZE])                           { x = arr[0]; y = arr[1]; z = arr[2]; e = arr[3]; }
-  #if DISTINCT_AXES > XYZE
-    FI void set(const T (&arr)[DISTINCT_AXES])                { x = arr[0]; y = arr[1]; z = arr[2]; e = arr[3]; }
+  // Reset all to 0
+  FI void reset()                     { LOGICAL_AXIS_GANG(e =, x =, y =, z =, i =, j =, k =) 0; }
+
+  // Setters taking struct types and arrays
+  FI void set(const T px)             { x = px;               }
+  FI void set(const T px, const T py) { x = px;    y = py;    }
+  FI void set(const XYval<T> pxy)     { x = pxy.x; y = pxy.y; }
+  FI void set(const XYZval<T> pxyz)   { set(LINEAR_AXIS_ELEM(pxyz)); }
+  #if HAS_Z_AXIS
+    FI void set(LINEAR_AXIS_ARGS(const T))         { LINEAR_AXIS_CODE(a = x, b = y, c = z, u = i, v = j, w = k); }
   #endif
-  FI XYZEval<T>          copy()                         const { return *this; }
-  FI XYZEval<T>           ABS()                         const { return { T(_ABS(x)), T(_ABS(y)), T(_ABS(z)), T(_ABS(e)) }; }
-  FI XYZEval<int16_t>   asInt()                               { return { int16_t(x), int16_t(y), int16_t(z), int16_t(e) }; }
-  FI XYZEval<int16_t>   asInt()                         const { return { int16_t(x), int16_t(y), int16_t(z), int16_t(e) }; }
-  FI XYZEval<int32_t>  asLong()                               { return { int32_t(x), int32_t(y), int32_t(z), int32_t(e) }; }
-  FI XYZEval<int32_t>  asLong()                         const { return { int32_t(x), int32_t(y), int32_t(z), int32_t(e) }; }
-  FI XYZEval<int32_t>  ROUNDL()                               { return { int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(e)) }; }
-  FI XYZEval<int32_t>  ROUNDL()                         const { return { int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(e)) }; }
-  FI XYZEval<float>   asFloat()                               { return { static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(e) }; }
-  FI XYZEval<float>   asFloat()                         const { return { static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(e) }; }
-  FI XYZEval<float> reciprocal()                        const { return {  _RECIP(x),  _RECIP(y),  _RECIP(z),  _RECIP(e) }; }
-  FI XYZEval<float> asLogical()                         const { XYZEval<float> o = asFloat(); toLogical(o); return o; }
-  FI XYZEval<float>  asNative()                         const { XYZEval<float> o = asFloat(); toNative(o);  return o; }
-  FI operator       XYval<T>&()                               { return *(XYval<T>*)this; }
-  FI operator const XYval<T>&()                         const { return *(const XYval<T>*)this; }
-  FI operator       XYZval<T>&()                              { return *(XYZval<T>*)this; }
-  FI operator const XYZval<T>&()                        const { return *(const XYZval<T>*)this; }
-  FI       T&    operator[](const int i)                      { return pos[i]; }
-  FI const T&    operator[](const int i)                const { return pos[i]; }
-  FI XYZEval<T>& operator= (const T v)                        { set(v, v, v, v); return *this; }
-  FI XYZEval<T>& operator= (const XYval<T>   &rs)             { set(rs.x, rs.y); return *this; }
-  FI XYZEval<T>& operator= (const XYZval<T>  &rs)             { set(rs.x, rs.y, rs.z); return *this; }
-  FI XYZEval<T>  operator+ (const XYval<T>   &rs)       const { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y;                             return ls; }
-  FI XYZEval<T>  operator+ (const XYval<T>   &rs)             { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y;                             return ls; }
-  FI XYZEval<T>  operator- (const XYval<T>   &rs)       const { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y;                             return ls; }
-  FI XYZEval<T>  operator- (const XYval<T>   &rs)             { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y;                             return ls; }
-  FI XYZEval<T>  operator* (const XYval<T>   &rs)       const { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y;                             return ls; }
-  FI XYZEval<T>  operator* (const XYval<T>   &rs)             { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y;                             return ls; }
-  FI XYZEval<T>  operator/ (const XYval<T>   &rs)       const { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y;                             return ls; }
-  FI XYZEval<T>  operator/ (const XYval<T>   &rs)             { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y;                             return ls; }
-  FI XYZEval<T>  operator+ (const XYZval<T>  &rs)       const { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z;               return ls; }
-  FI XYZEval<T>  operator+ (const XYZval<T>  &rs)             { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z;               return ls; }
-  FI XYZEval<T>  operator- (const XYZval<T>  &rs)       const { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z;               return ls; }
-  FI XYZEval<T>  operator- (const XYZval<T>  &rs)             { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z;               return ls; }
-  FI XYZEval<T>  operator* (const XYZval<T>  &rs)       const { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z;               return ls; }
-  FI XYZEval<T>  operator* (const XYZval<T>  &rs)             { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z;               return ls; }
-  FI XYZEval<T>  operator/ (const XYZval<T>  &rs)       const { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z;               return ls; }
-  FI XYZEval<T>  operator/ (const XYZval<T>  &rs)             { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z;               return ls; }
-  FI XYZEval<T>  operator+ (const XYZEval<T> &rs)       const { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; ls.e += rs.e; return ls; }
-  FI XYZEval<T>  operator+ (const XYZEval<T> &rs)             { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; ls.z += rs.z; ls.e += rs.e; return ls; }
-  FI XYZEval<T>  operator- (const XYZEval<T> &rs)       const { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; ls.e -= rs.e; return ls; }
-  FI XYZEval<T>  operator- (const XYZEval<T> &rs)             { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; ls.z -= rs.z; ls.e -= rs.e; return ls; }
-  FI XYZEval<T>  operator* (const XYZEval<T> &rs)       const { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; ls.e *= rs.e; return ls; }
-  FI XYZEval<T>  operator* (const XYZEval<T> &rs)             { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; ls.e *= rs.e; return ls; }
-  FI XYZEval<T>  operator/ (const XYZEval<T> &rs)       const { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; ls.e /= rs.e; return ls; }
-  FI XYZEval<T>  operator/ (const XYZEval<T> &rs)             { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; ls.e /= rs.e; return ls; }
-  FI XYZEval<T>  operator* (const float &v)             const { XYZEval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    ls.e *= v;    return ls; }
-  FI XYZEval<T>  operator* (const float &v)                   { XYZEval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    ls.e *= v;    return ls; }
-  FI XYZEval<T>  operator* (const int &v)               const { XYZEval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    ls.e *= v;    return ls; }
-  FI XYZEval<T>  operator* (const int &v)                     { XYZEval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    ls.e *= v;    return ls; }
-  FI XYZEval<T>  operator/ (const float &v)             const { XYZEval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    ls.e /= v;    return ls; }
-  FI XYZEval<T>  operator/ (const float &v)                   { XYZEval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    ls.e /= v;    return ls; }
-  FI XYZEval<T>  operator/ (const int &v)               const { XYZEval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    ls.e /= v;    return ls; }
-  FI XYZEval<T>  operator/ (const int &v)                     { XYZEval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    ls.e /= v;    return ls; }
-  FI XYZEval<T>  operator>>(const int &v)               const { XYZEval<T> ls = *this; _RS(ls.x);    _RS(ls.y);    _RS(ls.z);    _RS(ls.e);    return ls; }
-  FI XYZEval<T>  operator>>(const int &v)                     { XYZEval<T> ls = *this; _RS(ls.x);    _RS(ls.y);    _RS(ls.z);    _RS(ls.e);    return ls; }
-  FI XYZEval<T>  operator<<(const int &v)               const { XYZEval<T> ls = *this; _LS(ls.x);    _LS(ls.y);    _LS(ls.z);    _LS(ls.e);    return ls; }
-  FI XYZEval<T>  operator<<(const int &v)                     { XYZEval<T> ls = *this; _LS(ls.x);    _LS(ls.y);    _LS(ls.z);    _LS(ls.e);    return ls; }
-  FI XYZEval<T>& operator+=(const XYval<T>   &rs)             { x += rs.x; y += rs.y;                       return *this; }
-  FI XYZEval<T>& operator-=(const XYval<T>   &rs)             { x -= rs.x; y -= rs.y;                       return *this; }
-  FI XYZEval<T>& operator*=(const XYval<T>   &rs)             { x *= rs.x; y *= rs.y;                       return *this; }
-  FI XYZEval<T>& operator/=(const XYval<T>   &rs)             { x /= rs.x; y /= rs.y;                       return *this; }
-  FI XYZEval<T>& operator+=(const XYZval<T>  &rs)             { x += rs.x; y += rs.y; z += rs.z;            return *this; }
-  FI XYZEval<T>& operator-=(const XYZval<T>  &rs)             { x -= rs.x; y -= rs.y; z -= rs.z;            return *this; }
-  FI XYZEval<T>& operator*=(const XYZval<T>  &rs)             { x *= rs.x; y *= rs.y; z *= rs.z;            return *this; }
-  FI XYZEval<T>& operator/=(const XYZval<T>  &rs)             { x /= rs.x; y /= rs.y; z /= rs.z;            return *this; }
-  FI XYZEval<T>& operator+=(const XYZEval<T> &rs)             { x += rs.x; y += rs.y; z += rs.z; e += rs.e; return *this; }
-  FI XYZEval<T>& operator-=(const XYZEval<T> &rs)             { x -= rs.x; y -= rs.y; z -= rs.z; e -= rs.e; return *this; }
-  FI XYZEval<T>& operator*=(const XYZEval<T> &rs)             { x *= rs.x; y *= rs.y; z *= rs.z; e *= rs.e; return *this; }
-  FI XYZEval<T>& operator/=(const XYZEval<T> &rs)             { x /= rs.x; y /= rs.y; z /= rs.z; e /= rs.e; return *this; }
-  FI XYZEval<T>& operator*=(const T &v)                       { x *= v;    y *= v;    z *= v;    e *= v;    return *this; }
-  FI XYZEval<T>& operator>>=(const int &v)                    { _RS(x);    _RS(y);    _RS(z);    _RS(e);    return *this; }
-  FI XYZEval<T>& operator<<=(const int &v)                    { _LS(x);    _LS(y);    _LS(z);    _LS(e);    return *this; }
-  FI bool        operator==(const XYZval<T>  &rs)             { return x == rs.x && y == rs.y && z == rs.z; }
-  FI bool        operator!=(const XYZval<T>  &rs)             { return !operator==(rs); }
-  FI bool        operator==(const XYZval<T>  &rs)       const { return x == rs.x && y == rs.y && z == rs.z; }
-  FI bool        operator!=(const XYZval<T>  &rs)       const { return !operator==(rs); }
-  FI       XYZEval<T> operator-()                             { return { -x, -y, -z, -e }; }
-  FI const XYZEval<T> operator-()                       const { return { -x, -y, -z, -e }; }
+  #if LOGICAL_AXES > LINEAR_AXES
+    FI void set(const XYval<T> pxy, const T pe)    { set(pxy); e = pe; }
+    FI void set(const XYZval<T> pxyz, const T pe)  { set(pxyz); e = pe; }
+    FI void set(LOGICAL_AXIS_ARGS(const T))        { LOGICAL_AXIS_CODE(_e = e, a = x, b = y, c = z, u = i, v = j, w = k); }
+  #endif
+  #if LINEAR_AXES >= 4
+    FI void set(const T px, const T py, const T pz)                         { x = px; y = py; z = pz; }
+  #endif
+  #if LINEAR_AXES >= 5
+    FI void set(const T px, const T py, const T pz, const T pi)             { x = px; y = py; z = pz; i = pi; }
+  #endif
+  #if LINEAR_AXES >= 6
+    FI void set(const T px, const T py, const T pz, const T pi, const T pj) { x = px; y = py; z = pz; i = pi; j = pj; }
+  #endif
+
+  // Length reduced to one dimension
+  FI T magnitude()                                 const { return (T)sqrtf(LOGICAL_AXIS_GANG(+ e*e, + x*x, + y*y, + z*z, + i*i, + j*j, + k*k)); }
+  // Pointer to the data as a simple array
+  FI operator T* ()                                      { return pos; }
+  // If any element is true then it's true
+  FI operator bool()                                     { return 0 LOGICAL_AXIS_GANG(|| e, || x, || y, || z, || i, || j, || k); }
+
+  // Explicit copy and copies with conversion
+  FI XYZEval<T>          copy()  const { XYZEval<T> o = *this; return o; }
+  FI XYZEval<T>           ABS()  const { return LOGICAL_AXIS_ARRAY(T(_ABS(e)), T(_ABS(x)), T(_ABS(y)), T(_ABS(z)), T(_ABS(i)), T(_ABS(j)), T(_ABS(k))); }
+  FI XYZEval<int16_t>   asInt()        { return LOGICAL_AXIS_ARRAY(int16_t(e), int16_t(x), int16_t(y), int16_t(z), int16_t(i), int16_t(j), int16_t(k)); }
+  FI XYZEval<int16_t>   asInt()  const { return LOGICAL_AXIS_ARRAY(int16_t(e), int16_t(x), int16_t(y), int16_t(z), int16_t(i), int16_t(j), int16_t(k)); }
+  FI XYZEval<int32_t>  asLong()        { return LOGICAL_AXIS_ARRAY(int32_t(e), int32_t(x), int32_t(y), int32_t(z), int32_t(i), int32_t(j), int32_t(k)); }
+  FI XYZEval<int32_t>  asLong()  const { return LOGICAL_AXIS_ARRAY(int32_t(e), int32_t(x), int32_t(y), int32_t(z), int32_t(i), int32_t(j), int32_t(k)); }
+  FI XYZEval<int32_t>  ROUNDL()        { return LOGICAL_AXIS_ARRAY(int32_t(LROUND(e)), int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(i)), int32_t(LROUND(j)), int32_t(LROUND(k))); }
+  FI XYZEval<int32_t>  ROUNDL()  const { return LOGICAL_AXIS_ARRAY(int32_t(LROUND(e)), int32_t(LROUND(x)), int32_t(LROUND(y)), int32_t(LROUND(z)), int32_t(LROUND(i)), int32_t(LROUND(j)), int32_t(LROUND(k))); }
+  FI XYZEval<float>   asFloat()        { return LOGICAL_AXIS_ARRAY(static_cast<float>(e), static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(i), static_cast<float>(j), static_cast<float>(k)); }
+  FI XYZEval<float>   asFloat()  const { return LOGICAL_AXIS_ARRAY(static_cast<float>(e), static_cast<float>(x), static_cast<float>(y), static_cast<float>(z), static_cast<float>(i), static_cast<float>(j), static_cast<float>(k)); }
+  FI XYZEval<float> reciprocal() const { return LOGICAL_AXIS_ARRAY(_RECIP(e),  _RECIP(x),  _RECIP(y),  _RECIP(z),  _RECIP(i),  _RECIP(j),  _RECIP(k)); }
+
+  // Marlin workspace shifting is done with G92 and M206
+  FI XYZEval<float> asLogical()  const { XYZEval<float> o = asFloat(); toLogical(o); return o; }
+  FI XYZEval<float>  asNative()  const { XYZEval<float> o = asFloat(); toNative(o);  return o; }
+
+  // In-place cast to types having fewer fields
+  FI operator       XYval<T>&()        { return *(XYval<T>*)this; }
+  FI operator const XYval<T>&()  const { return *(const XYval<T>*)this; }
+  FI operator       XYZval<T>&()       { return *(XYZval<T>*)this; }
+  FI operator const XYZval<T>&() const { return *(const XYZval<T>*)this; }
+
+  // Accessor via an AxisEnum (or any integer) [index]
+  FI       T&    operator[](const int n)                  { return pos[n]; }
+  FI const T&    operator[](const int n)            const { return pos[n]; }
+
+  // Assignment operator overrides do the expected thing
+  FI XYZEval<T>& operator= (const T v)                    { set(LIST_N_1(LINEAR_AXES, v)); return *this; }
+  FI XYZEval<T>& operator= (const XYval<T>   &rs)         { set(rs.x, rs.y); return *this; }
+  FI XYZEval<T>& operator= (const XYZval<T>  &rs)         { set(LINEAR_AXIS_ELEM(rs)); return *this; }
+
+  // Override other operators to get intuitive behaviors
+  FI XYZEval<T>  operator+ (const XYval<T>   &rs)   const { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; return ls; }
+  FI XYZEval<T>  operator+ (const XYval<T>   &rs)         { XYZEval<T> ls = *this; ls.x += rs.x; ls.y += rs.y; return ls; }
+  FI XYZEval<T>  operator- (const XYval<T>   &rs)   const { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; return ls; }
+  FI XYZEval<T>  operator- (const XYval<T>   &rs)         { XYZEval<T> ls = *this; ls.x -= rs.x; ls.y -= rs.y; return ls; }
+  FI XYZEval<T>  operator* (const XYval<T>   &rs)   const { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; return ls; }
+  FI XYZEval<T>  operator* (const XYval<T>   &rs)         { XYZEval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; return ls; }
+  FI XYZEval<T>  operator/ (const XYval<T>   &rs)   const { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; return ls; }
+  FI XYZEval<T>  operator/ (const XYval<T>   &rs)         { XYZEval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; return ls; }
+  FI XYZEval<T>  operator+ (const XYZval<T>  &rs)   const { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZEval<T>  operator+ (const XYZval<T>  &rs)         { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZEval<T>  operator- (const XYZval<T>  &rs)   const { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZEval<T>  operator- (const XYZval<T>  &rs)         { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZEval<T>  operator* (const XYZval<T>  &rs)   const { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZEval<T>  operator* (const XYZval<T>  &rs)         { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZEval<T>  operator/ (const XYZval<T>  &rs)   const { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZEval<T>  operator/ (const XYZval<T>  &rs)         { XYZval<T>  ls = *this; LINEAR_AXIS_CODE(ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZEval<T>  operator+ (const XYZEval<T>  &rs)  const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e += rs.e, ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZEval<T>  operator+ (const XYZEval<T>  &rs)        { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e += rs.e, ls.x += rs.x, ls.y += rs.y, ls.z += rs.z, ls.i += rs.i, ls.j += rs.j, ls.k += rs.k); return ls; }
+  FI XYZEval<T>  operator- (const XYZEval<T>  &rs)  const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e -= rs.e, ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZEval<T>  operator- (const XYZEval<T>  &rs)        { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e -= rs.e, ls.x -= rs.x, ls.y -= rs.y, ls.z -= rs.z, ls.i -= rs.i, ls.j -= rs.j, ls.k -= rs.k); return ls; }
+  FI XYZEval<T>  operator* (const XYZEval<T>  &rs)  const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= rs.e, ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZEval<T>  operator* (const XYZEval<T>  &rs)        { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= rs.e, ls.x *= rs.x, ls.y *= rs.y, ls.z *= rs.z, ls.i *= rs.i, ls.j *= rs.j, ls.k *= rs.k); return ls; }
+  FI XYZEval<T>  operator/ (const XYZEval<T>  &rs)  const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= rs.e, ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZEval<T>  operator/ (const XYZEval<T>  &rs)        { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= rs.e, ls.x /= rs.x, ls.y /= rs.y, ls.z /= rs.z, ls.i /= rs.i, ls.j /= rs.j, ls.k /= rs.k); return ls; }
+  FI XYZEval<T>  operator* (const float &v)         const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= v,    ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZEval<T>  operator* (const float &v)               { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= v,    ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZEval<T>  operator* (const int &v)           const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= v,    ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZEval<T>  operator* (const int &v)                 { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e *= v,    ls.x *= v,    ls.y *= v,    ls.z *= v,    ls.i *= v,    ls.j *= v,    ls.k *= v   ); return ls; }
+  FI XYZEval<T>  operator/ (const float &v)         const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= v,    ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZEval<T>  operator/ (const float &v)               { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= v,    ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZEval<T>  operator/ (const int &v)           const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= v,    ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZEval<T>  operator/ (const int &v)                 { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(ls.e /= v,    ls.x /= v,    ls.y /= v,    ls.z /= v,    ls.i /= v,    ls.j /= v,    ls.k /= v   ); return ls; }
+  FI XYZEval<T>  operator>>(const int &v)           const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(_RS(ls.e),    _RS(ls.x),    _RS(ls.y),    _RS(ls.z),    _RS(ls.i),    _RS(ls.j),    _RS(ls.k)   ); return ls; }
+  FI XYZEval<T>  operator>>(const int &v)                 { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(_RS(ls.e),    _RS(ls.x),    _RS(ls.y),    _RS(ls.z),    _RS(ls.i),    _RS(ls.j),    _RS(ls.k)   ); return ls; }
+  FI XYZEval<T>  operator<<(const int &v)           const { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(_LS(ls.e),    _LS(ls.x),    _LS(ls.y),    _LS(ls.z),    _LS(ls.i),    _LS(ls.j),    _LS(ls.k)   ); return ls; }
+  FI XYZEval<T>  operator<<(const int &v)                 { XYZEval<T> ls = *this; LOGICAL_AXIS_CODE(_LS(ls.e),    _LS(ls.x),    _LS(ls.y),    _LS(ls.z),    _LS(ls.i),    _LS(ls.j),    _LS(ls.k)   ); return ls; }
+  FI const XYZEval<T> operator-()                   const { return LOGICAL_AXIS_ARRAY(-e, -x, -y, -z, -i, -j, -k); }
+  FI       XYZEval<T> operator-()                         { return LOGICAL_AXIS_ARRAY(-e, -x, -y, -z, -i, -j, -k); }
+
+  // Modifier operators
+  FI XYZEval<T>& operator+=(const XYval<T>   &rs)         { x += rs.x; y += rs.y; return *this; }
+  FI XYZEval<T>& operator-=(const XYval<T>   &rs)         { x -= rs.x; y -= rs.y; return *this; }
+  FI XYZEval<T>& operator*=(const XYval<T>   &rs)         { x *= rs.x; y *= rs.y; return *this; }
+  FI XYZEval<T>& operator/=(const XYval<T>   &rs)         { x /= rs.x; y /= rs.y; return *this; }
+  FI XYZEval<T>& operator+=(const XYZval<T>  &rs)         { LINEAR_AXIS_CODE(x += rs.x, y += rs.y, z += rs.z, i += rs.i, j += rs.j, k += rs.k); return *this; }
+  FI XYZEval<T>& operator-=(const XYZval<T>  &rs)         { LINEAR_AXIS_CODE(x -= rs.x, y -= rs.y, z -= rs.z, i -= rs.i, j -= rs.j, k -= rs.k); return *this; }
+  FI XYZEval<T>& operator*=(const XYZval<T>  &rs)         { LINEAR_AXIS_CODE(x *= rs.x, y *= rs.y, z *= rs.z, i *= rs.i, j *= rs.j, k *= rs.k); return *this; }
+  FI XYZEval<T>& operator/=(const XYZval<T>  &rs)         { LINEAR_AXIS_CODE(x /= rs.x, y /= rs.y, z /= rs.z, i /= rs.i, j /= rs.j, k /= rs.k); return *this; }
+  FI XYZEval<T>& operator+=(const XYZEval<T> &rs)         { LOGICAL_AXIS_CODE(e += rs.e, x += rs.x, y += rs.y, z += rs.z, i += rs.i, j += rs.j, k += rs.k); return *this; }
+  FI XYZEval<T>& operator-=(const XYZEval<T> &rs)         { LOGICAL_AXIS_CODE(e -= rs.e, x -= rs.x, y -= rs.y, z -= rs.z, i -= rs.i, j -= rs.j, k -= rs.k); return *this; }
+  FI XYZEval<T>& operator*=(const XYZEval<T> &rs)         { LOGICAL_AXIS_CODE(e *= rs.e, x *= rs.x, y *= rs.y, z *= rs.z, i *= rs.i, j *= rs.j, k *= rs.k); return *this; }
+  FI XYZEval<T>& operator/=(const XYZEval<T> &rs)         { LOGICAL_AXIS_CODE(e /= rs.e, x /= rs.x, y /= rs.y, z /= rs.z, i /= rs.i, j /= rs.j, k /= rs.k); return *this; }
+  FI XYZEval<T>& operator*=(const T &v)                   { LOGICAL_AXIS_CODE(e *= v,    x *= v,    y *= v,    z *= v,    i *= v,    j *= v,    k *= v);    return *this; }
+  FI XYZEval<T>& operator>>=(const int &v)                { LOGICAL_AXIS_CODE(_RS(e),    _RS(x),    _RS(y),    _RS(z),    _RS(i),    _RS(j),    _RS(k));    return *this; }
+  FI XYZEval<T>& operator<<=(const int &v)                { LOGICAL_AXIS_CODE(_LS(e),    _LS(x),    _LS(y),    _LS(z),    _LS(i),    _LS(j),    _LS(k));    return *this; }
+
+  // Exact comparisons. For floats a "NEAR" operation may be better.
+  FI bool        operator==(const XYZval<T>  &rs)         { return true LINEAR_AXIS_GANG(&& x == rs.x, && y == rs.y, && z == rs.z, && i == rs.i, && j == rs.j, && k == rs.k); }
+  FI bool        operator==(const XYZval<T>  &rs)   const { return true LINEAR_AXIS_GANG(&& x == rs.x, && y == rs.y, && z == rs.z, && i == rs.i, && j == rs.j, && k == rs.k); }
+  FI bool        operator!=(const XYZval<T>  &rs)         { return !operator==(rs); }
+  FI bool        operator!=(const XYZval<T>  &rs)   const { return !operator==(rs); }
 };
 
 #undef _RECIP
@@ -514,6 +666,3 @@ struct XYZEval {
 #undef _LS
 #undef _RS
 #undef FI
-
-const xyze_char_t axis_codes { 'X', 'Y', 'Z', 'E' };
-#define AXIS_CHAR(A) ((char)('X' + A))

Marlin/src/core/utility.cpp

@@ -122,7 +122,7 @@ void safe_delay(millis_t ms) {
             SERIAL_ECHOLNPAIR("Z Fade: ", planner.z_fade_height);
         #endif
         #if ABL_PLANAR
-          SERIAL_ECHOPGM("ABL Adjustment X");
+          SERIAL_ECHOPGM("ABL Adjustment");
           LOOP_LINEAR_AXES(a) {
             const float v = planner.get_axis_position_mm(AxisEnum(a)) - current_position[a];
             SERIAL_CHAR(' ', AXIS_CHAR(a));

Marlin/src/core/utility.h

@@ -76,3 +76,11 @@ public:
 // Converts from an uint8_t in the range of 0-255 to an uint8_t
 // in the range 0-100 while avoiding rounding artifacts
 constexpr uint8_t ui8_to_percent(const uint8_t i) { return (int(i) * 100 + 127) / 255; }
+
+const xyze_char_t axis_codes LOGICAL_AXIS_ARRAY('E', 'X', 'Y', 'Z', AXIS4_NAME, AXIS5_NAME, AXIS6_NAME);
+
+#if LINEAR_AXES <= XYZ
+  #define AXIS_CHAR(A) ((char)('X' + A))
+#else
+  #define AXIS_CHAR(A) axis_codes[A]
+#endif

Marlin/src/feature/bedlevel/mbl/mesh_bed_leveling.h

@@ -103,9 +103,7 @@ public:
   }
 
   static float get_z(const xy_pos_t &pos
-    #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-      , const_float_t factor=1.0f
-    #endif
+    OPTARG(ENABLE_LEVELING_FADE_HEIGHT, const_float_t factor=1.0f)
   ) {
     #if DISABLED(ENABLE_LEVELING_FADE_HEIGHT)
       constexpr float factor = 1.0f;

Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp

@@ -113,20 +113,22 @@
     const xy_float_t ad = sign * dist;
     const bool use_x_dist = ad.x > ad.y;
 
-    float on_axis_distance = use_x_dist ? dist.x : dist.y,
-          e_position = end.e - start.e,
-          z_position = end.z - start.z;
+    float on_axis_distance = use_x_dist ? dist.x : dist.y;
 
-    const float e_normalized_dist = e_position / on_axis_distance, // Allow divide by zero
-                z_normalized_dist = z_position / on_axis_distance;
+    const float z_normalized_dist = (end.z - start.z) / on_axis_distance; // Allow divide by zero
+    #if HAS_EXTRUDERS
+      const float e_normalized_dist = (end.e - start.e) / on_axis_distance;
+      const bool inf_normalized_flag = isinf(e_normalized_dist);
+    #endif
 
     xy_int8_t icell = istart;
 
     const float ratio = dist.y / dist.x,        // Allow divide by zero
                 c = start.y - ratio * start.x;
 
-    const bool inf_normalized_flag = isinf(e_normalized_dist),
-               inf_ratio_flag = isinf(ratio);
+    const bool inf_ratio_flag = isinf(ratio);
+
+    xyze_pos_t dest; // Stores XYZE for segmented moves
 
     /**
      * Handle vertical lines that stay within one column.
@@ -143,34 +145,36 @@
          * For others the next X is the same so this can continue.
          * Calculate X at the next Y mesh line.
          */
-        const float rx = inf_ratio_flag ? start.x : (next_mesh_line_y - c) / ratio;
+        dest.x = inf_ratio_flag ? start.x : (next_mesh_line_y - c) / ratio;
 
-        float z0 = z_correction_for_x_on_horizontal_mesh_line(rx, icell.x, icell.y)
+        float z0 = z_correction_for_x_on_horizontal_mesh_line(dest.x, icell.x, icell.y)
                    * planner.fade_scaling_factor_for_z(end.z);
 
         // Undefined parts of the Mesh in z_values[][] are NAN.
         // Replace NAN corrections with 0.0 to prevent NAN propagation.
         if (isnan(z0)) z0 = 0.0;
 
-        const float ry = mesh_index_to_ypos(icell.y);
+        dest.y = mesh_index_to_ypos(icell.y);
 
         /**
          * Without this check, it's possible to generate a zero length move, as in the case where
          * the line is heading down, starting exactly on a mesh line boundary. Since this is rare
          * it might be fine to remove this check and let planner.buffer_segment() filter it out.
          */
-        if (ry != start.y) {
+        if (dest.y != start.y) {
           if (!inf_normalized_flag) { // fall-through faster than branch
-            on_axis_distance = use_x_dist ? rx - start.x : ry - start.y;
-            e_position = start.e + on_axis_distance * e_normalized_dist;
-            z_position = start.z + on_axis_distance * z_normalized_dist;
+            on_axis_distance = use_x_dist ? dest.x - start.x : dest.y - start.y;
+            TERN_(HAS_EXTRUDERS, dest.e = start.e + on_axis_distance * e_normalized_dist);
+            dest.z = start.z + on_axis_distance * z_normalized_dist;
           }
           else {
-            e_position = end.e;
-            z_position = end.z;
+            TERN_(HAS_EXTRUDERS, dest.e = end.e);
+            dest.z = end.z;
           }
 
-          planner.buffer_segment(rx, ry, z_position + z0, e_position, scaled_fr_mm_s, extruder);
+          dest.z += z0;
+          planner.buffer_segment(dest, scaled_fr_mm_s, extruder);
+
         } //else printf("FIRST MOVE PRUNED  ");
       }
 
@@ -188,12 +192,13 @@
      */
     if (iadd.y == 0) {      // Horizontal line?
       icell.x += ineg.x;     // Heading left? Just go to the left edge of the cell for the first move.
+
       while (icell.x != iend.x + ineg.x) {
         icell.x += iadd.x;
-        const float rx = mesh_index_to_xpos(icell.x);
-        const float ry = ratio * rx + c;    // Calculate Y at the next X mesh line
+        dest.x = mesh_index_to_xpos(icell.x);
+        dest.y = ratio * dest.x + c;    // Calculate Y at the next X mesh line
 
-        float z0 = z_correction_for_y_on_vertical_mesh_line(ry, icell.x, icell.y)
+        float z0 = z_correction_for_y_on_vertical_mesh_line(dest.y, icell.x, icell.y)
                      * planner.fade_scaling_factor_for_z(end.z);
 
         // Undefined parts of the Mesh in z_values[][] are NAN.
@@ -205,19 +210,20 @@
          * the line is heading left, starting exactly on a mesh line boundary. Since this is rare
          * it might be fine to remove this check and let planner.buffer_segment() filter it out.
          */
-        if (rx != start.x) {
+        if (dest.x != start.x) {
           if (!inf_normalized_flag) {
-            on_axis_distance = use_x_dist ? rx - start.x : ry - start.y;
-            e_position = start.e + on_axis_distance * e_normalized_dist;  // is based on X or Y because this is a horizontal move
-            z_position = start.z + on_axis_distance * z_normalized_dist;
+            on_axis_distance = use_x_dist ? dest.x - start.x : dest.y - start.y;
+            TERN_(HAS_EXTRUDERS, dest.e = start.e + on_axis_distance * e_normalized_dist); // Based on X or Y because the move is horizontal
+            dest.z = start.z + on_axis_distance * z_normalized_dist;
           }
           else {
-            e_position = end.e;
-            z_position = end.z;
+            TERN_(HAS_EXTRUDERS, dest.e = end.e);
+            dest.z = end.z;
           }
 
-          if (!planner.buffer_segment(rx, ry, z_position + z0, e_position, scaled_fr_mm_s, extruder))
-            break;
+          dest.z += z0;
+          if (!planner.buffer_segment(dest, scaled_fr_mm_s, extruder)) break;
+
         } //else printf("FIRST MOVE PRUNED  ");
       }
 
@@ -239,57 +245,65 @@
     while (cnt) {
 
       const float next_mesh_line_x = mesh_index_to_xpos(icell.x + iadd.x),
-                  next_mesh_line_y = mesh_index_to_ypos(icell.y + iadd.y),
-                  ry = ratio * next_mesh_line_x + c,    // Calculate Y at the next X mesh line
-                  rx = (next_mesh_line_y - c) / ratio;  // Calculate X at the next Y mesh line
-                                                        // (No need to worry about ratio == 0.
-                                                        //  In that case, it was already detected
-                                                        //  as a vertical line move above.)
+                  next_mesh_line_y = mesh_index_to_ypos(icell.y + iadd.y);
 
-      if (neg.x == (rx > next_mesh_line_x)) { // Check if we hit the Y line first
+      dest.y = ratio * next_mesh_line_x + c;    // Calculate Y at the next X mesh line
+      dest.x = (next_mesh_line_y - c) / ratio;  // Calculate X at the next Y mesh line
+                                                // (No need to worry about ratio == 0.
+                                                //  In that case, it was already detected
+                                                //  as a vertical line move above.)
+
+      if (neg.x == (dest.x > next_mesh_line_x)) { // Check if we hit the Y line first
         // Yes!  Crossing a Y Mesh Line next
-        float z0 = z_correction_for_x_on_horizontal_mesh_line(rx, icell.x - ineg.x, icell.y + iadd.y)
+        float z0 = z_correction_for_x_on_horizontal_mesh_line(dest.x, icell.x - ineg.x, icell.y + iadd.y)
                    * planner.fade_scaling_factor_for_z(end.z);
 
         // Undefined parts of the Mesh in z_values[][] are NAN.
         // Replace NAN corrections with 0.0 to prevent NAN propagation.
         if (isnan(z0)) z0 = 0.0;
 
+        dest.y = next_mesh_line_y;
+
         if (!inf_normalized_flag) {
-          on_axis_distance = use_x_dist ? rx - start.x : next_mesh_line_y - start.y;
-          e_position = start.e + on_axis_distance * e_normalized_dist;
-          z_position = start.z + on_axis_distance * z_normalized_dist;
+          on_axis_distance = use_x_dist ? dest.x - start.x : dest.y - start.y;
+          TERN_(HAS_EXTRUDERS, dest.e = start.e + on_axis_distance * e_normalized_dist);
+          dest.z = start.z + on_axis_distance * z_normalized_dist;
         }
         else {
-          e_position = end.e;
-          z_position = end.z;
+          TERN_(HAS_EXTRUDERS, dest.e = end.e);
+          dest.z = end.z;
         }
-        if (!planner.buffer_segment(rx, next_mesh_line_y, z_position + z0, e_position, scaled_fr_mm_s, extruder))
-          break;
+
+        dest.z += z0;
+        if (!planner.buffer_segment(dest, scaled_fr_mm_s, extruder)) break;
+
         icell.y += iadd.y;
         cnt.y--;
       }
       else {
         // Yes!  Crossing a X Mesh Line next
-        float z0 = z_correction_for_y_on_vertical_mesh_line(ry, icell.x + iadd.x, icell.y - ineg.y)
+        float z0 = z_correction_for_y_on_vertical_mesh_line(dest.y, icell.x + iadd.x, icell.y - ineg.y)
                    * planner.fade_scaling_factor_for_z(end.z);
 
         // Undefined parts of the Mesh in z_values[][] are NAN.
         // Replace NAN corrections with 0.0 to prevent NAN propagation.
         if (isnan(z0)) z0 = 0.0;
 
+        dest.x = next_mesh_line_x;
+
         if (!inf_normalized_flag) {
-          on_axis_distance = use_x_dist ? next_mesh_line_x - start.x : ry - start.y;
-          e_position = start.e + on_axis_distance * e_normalized_dist;
-          z_position = start.z + on_axis_distance * z_normalized_dist;
+          on_axis_distance = use_x_dist ? dest.x - start.x : dest.y - start.y;
+          TERN_(HAS_EXTRUDERS, dest.e = start.e + on_axis_distance * e_normalized_dist);
+          dest.z = start.z + on_axis_distance * z_normalized_dist;
         }
         else {
-          e_position = end.e;
-          z_position = end.z;
+          TERN_(HAS_EXTRUDERS, dest.e = end.e);
+          dest.z = end.z;
         }
 
-        if (!planner.buffer_segment(next_mesh_line_x, ry, z_position + z0, e_position, scaled_fr_mm_s, extruder))
-          break;
+        dest.z += z0;
+        if (!planner.buffer_segment(dest, scaled_fr_mm_s, extruder)) break;
+
         icell.x += iadd.x;
         cnt.x--;
       }
@@ -362,15 +376,11 @@
       while (--segments) {
         raw += diff;
         planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, segment_xyz_mm
-          #if ENABLED(SCARA_FEEDRATE_SCALING)
-            , inv_duration
-          #endif
+          OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
         );
       }
       planner.buffer_line(destination, scaled_fr_mm_s, active_extruder, segment_xyz_mm
-        #if ENABLED(SCARA_FEEDRATE_SCALING)
-          , inv_duration
-        #endif
+        OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
       );
       return false; // Did not set current from destination
     }
@@ -442,11 +452,9 @@
           #endif
         ;
 
-        planner.buffer_line(raw.x, raw.y, raw.z + z_cxcy, raw.e, scaled_fr_mm_s, active_extruder, segment_xyz_mm
-          #if ENABLED(SCARA_FEEDRATE_SCALING)
-            , inv_duration
-          #endif
-        );
+        const float oldz = raw.z; raw.z += z_cxcy;
+        planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, segment_xyz_mm OPTARG(SCARA_FEEDRATE_SCALING, inv_duration) );
+        raw.z = oldz;
 
         if (segments == 0)                        // done with last segment
           return false;                           // didn't set current from destination

Marlin/src/feature/caselight.cpp

@@ -41,7 +41,7 @@ bool CaseLight::on = CASE_LIGHT_DEFAULT_ON;
 #if CASE_LIGHT_IS_COLOR_LED
   #include "leds/leds.h"
   constexpr uint8_t init_case_light[] = CASE_LIGHT_DEFAULT_COLOR;
-  LEDColor CaseLight::color = { init_case_light[0], init_case_light[1], init_case_light[2], TERN_(HAS_WHITE_LED, init_case_light[3]) };
+  LEDColor CaseLight::color = { init_case_light[0], init_case_light[1], init_case_light[2] OPTARG(HAS_WHITE_LED, init_case_light[3]) };
 #endif
 
 void CaseLight::update(const bool sflag) {
@@ -65,9 +65,7 @@ void CaseLight::update(const bool sflag) {
   #endif
 
   #if CASE_LIGHT_IS_COLOR_LED
-
-    leds.set_color(MakeLEDColor(color.r, color.g, color.b, color.w, n10ct));
-
+    leds.set_color(LEDColor(color.r, color.g, color.b OPTARG(HAS_WHITE_LED, color.w), n10ct));
   #else // !CASE_LIGHT_IS_COLOR_LED
 
     #if CASELIGHT_USES_BRIGHTNESS

Marlin/src/feature/cooler.h

@@ -78,10 +78,8 @@ public:
 
     // Get the total flow (in liters per minute) since the last reading
     static void calc_flowrate() {
-      //flowmeter_interrupt_disable();
-      //  const uint16_t pulses = flowpulses;
-      //flowmeter_interrupt_enable();
-      flowrate = flowpulses * 60.0f * (1000.0f / (FLOWMETER_INTERVAL)) * (1000.0f / (FLOWMETER_PPL));
+      // flowrate = (litres) * (seconds) = litres per minute
+      flowrate = (flowpulses / (float)FLOWMETER_PPL) * ((1000.0f / (float)FLOWMETER_INTERVAL) * 60.0f);
       flowpulses = 0;
     }
 

Marlin/src/feature/encoder_i2c.cpp

@@ -327,7 +327,7 @@ int32_t I2CPositionEncoder::get_raw_count() {
 }
 
 bool I2CPositionEncoder::test_axis() {
-  //only works on XYZ cartesian machines for the time being
+  // Only works on XYZ Cartesian machines for the time being
   if (!(encoderAxis == X_AXIS || encoderAxis == Y_AXIS || encoderAxis == Z_AXIS)) return false;
 
   const float startPosition = soft_endstop.min[encoderAxis] + 10,
@@ -345,9 +345,12 @@ bool I2CPositionEncoder::test_axis() {
   endCoord[encoderAxis] = endPosition;
 
   planner.synchronize();
-  startCoord.e = planner.get_axis_position_mm(E_AXIS);
-  planner.buffer_line(startCoord, fr_mm_s, 0);
-  planner.synchronize();
+
+  #if HAS_EXTRUDERS
+    startCoord.e = planner.get_axis_position_mm(E_AXIS);
+    planner.buffer_line(startCoord, fr_mm_s, 0);
+    planner.synchronize();
+  #endif
 
   // if the module isn't currently trusted, wait until it is (or until it should be if things are working)
   if (!trusted) {
@@ -357,7 +360,7 @@ bool I2CPositionEncoder::test_axis() {
   }
 
   if (trusted) { // if trusted, commence test
-    endCoord.e = planner.get_axis_position_mm(E_AXIS);
+    TERN_(HAS_EXTRUDERS, endCoord.e = planner.get_axis_position_mm(E_AXIS));
     planner.buffer_line(endCoord, fr_mm_s, 0);
     planner.synchronize();
   }
@@ -402,7 +405,7 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
   planner.synchronize();
 
   LOOP_L_N(i, iter) {
-    startCoord.e = planner.get_axis_position_mm(E_AXIS);
+    TERN_(HAS_EXTRUDERS, startCoord.e = planner.get_axis_position_mm(E_AXIS));
     planner.buffer_line(startCoord, fr_mm_s, 0);
     planner.synchronize();
 
@@ -411,7 +414,7 @@ void I2CPositionEncoder::calibrate_steps_mm(const uint8_t iter) {
 
     //do_blocking_move_to(endCoord);
 
-    endCoord.e = planner.get_axis_position_mm(E_AXIS);
+    TERN_(HAS_EXTRUDERS, endCoord.e = planner.get_axis_position_mm(E_AXIS));
     planner.buffer_line(endCoord, fr_mm_s, 0);
     planner.synchronize();
 
@@ -497,9 +500,7 @@ void I2CPositionEncodersMgr::init() {
 
     encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_1_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_1_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 
   #if I2CPE_ENCODER_CNT > 1
@@ -528,9 +529,7 @@ void I2CPositionEncodersMgr::init() {
 
     encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_2_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_2_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 
   #if I2CPE_ENCODER_CNT > 2
@@ -557,11 +556,9 @@ void I2CPositionEncodersMgr::init() {
       encoders[i].set_ec_threshold(I2CPE_ENC_3_EC_THRESH);
     #endif
 
-  encoders[i].set_active(encoders[i].passes_test(true));
+    encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_3_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_3_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 
   #if I2CPE_ENCODER_CNT > 3
@@ -590,9 +587,7 @@ void I2CPositionEncodersMgr::init() {
 
     encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_4_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_4_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 
   #if I2CPE_ENCODER_CNT > 4
@@ -621,9 +616,7 @@ void I2CPositionEncodersMgr::init() {
 
     encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_5_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_5_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 
   #if I2CPE_ENCODER_CNT > 5
@@ -652,9 +645,7 @@ void I2CPositionEncodersMgr::init() {
 
     encoders[i].set_active(encoders[i].passes_test(true));
 
-    #if I2CPE_ENC_6_AXIS == E_AXIS
-      encoders[i].set_homed();
-    #endif
+    TERN_(HAS_EXTRUDERS, if (I2CPE_ENC_6_AXIS == E_AXIS) encoders[i].set_homed());
   #endif
 }
 

Marlin/src/feature/fwretract.cpp

@@ -91,11 +91,7 @@ void FWRetract::reset() {
  * Note: Auto-retract will apply the set Z hop in addition to any Z hop
  *       included in the G-code. Use M207 Z0 to to prevent double hop.
  */
-void FWRetract::retract(const bool retracting
-  #if HAS_MULTI_EXTRUDER
-    , bool swapping/*=false*/
-  #endif
-) {
+void FWRetract::retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool swapping/*=false*/)) {
   // Prevent two retracts or recovers in a row
   if (retracted[active_extruder] == retracting) return;
 

Marlin/src/feature/fwretract.h

@@ -74,11 +74,7 @@ public:
     #endif
   }
 
-  static void retract(const bool retracting
-    #if HAS_MULTI_EXTRUDER
-      , bool swapping = false
-    #endif
-  );
+  static void retract(const bool retracting OPTARG(HAS_MULTI_EXTRUDER, bool swapping = false));
 
   static void M207();
   static void M207_report(const bool forReplay=false);

Marlin/src/feature/leds/leds.cpp

@@ -47,9 +47,10 @@
 #endif
 
 #if ENABLED(LED_COLOR_PRESETS)
-  const LEDColor LEDLights::defaultLEDColor = MakeLEDColor(
-    LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE,
-    LED_USER_PRESET_WHITE, LED_USER_PRESET_BRIGHTNESS
+  const LEDColor LEDLights::defaultLEDColor = LEDColor(
+    LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE
+    OPTARG(HAS_WHITE_LED, LED_USER_PRESET_WHITE)
+    OPTARG(NEOPIXEL_LED, LED_USER_PRESET_BRIGHTNESS)
   );
 #endif
 
@@ -75,36 +76,35 @@ void LEDLights::setup() {
 }
 
 void LEDLights::set_color(const LEDColor &incol
-  #if ENABLED(NEOPIXEL_LED)
-    , bool isSequence/*=false*/
-  #endif
+  OPTARG(NEOPIXEL_IS_SEQUENTIAL, bool isSequence/*=false*/)
 ) {
 
   #if ENABLED(NEOPIXEL_LED)
 
     const uint32_t neocolor = LEDColorWhite() == incol
                             ? neo.Color(NEO_WHITE)
-                            : neo.Color(incol.r, incol.g, incol.b, incol.w);
-    static uint16_t nextLed = 0;
+                            : neo.Color(incol.r, incol.g, incol.b OPTARG(HAS_WHITE_LED, incol.w));
 
-    #ifdef NEOPIXEL_BKGD_LED_INDEX
-      if (NEOPIXEL_BKGD_LED_INDEX == nextLed) {
-        neo.set_color_background();
-        if (++nextLed >= neo.pixels()) {
-          nextLed = 0;
-          return;
+    #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+      static uint16_t nextLed = 0;
+      #ifdef NEOPIXEL_BKGD_INDEX_FIRST
+        while (WITHIN(nextLed, NEOPIXEL_BKGD_INDEX_FIRST, NEOPIXEL_BKGD_INDEX_LAST)) {
+          neo.reset_background_color();
+          if (++nextLed >= neo.pixels()) { nextLed = 0; return; }
         }
-      }
+      #endif
     #endif
 
     neo.set_brightness(incol.i);
 
-    if (isSequence) {
-      neo.set_pixel_color(nextLed, neocolor);
-      neo.show();
-      if (++nextLed >= neo.pixels()) nextLed = 0;
-      return;
-    }
+    #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
+      if (isSequence) {
+        neo.set_pixel_color(nextLed, neocolor);
+        neo.show();
+        if (++nextLed >= neo.pixels()) nextLed = 0;
+        return;
+      }
+    #endif
 
     neo.set_color(neocolor);
 
@@ -169,9 +169,10 @@ void LEDLights::set_color(const LEDColor &incol
 #if ENABLED(NEOPIXEL2_SEPARATE)
 
   #if ENABLED(NEO2_COLOR_PRESETS)
-    const LEDColor LEDLights2::defaultLEDColor = MakeLEDColor(
-      NEO2_USER_PRESET_RED, NEO2_USER_PRESET_GREEN, NEO2_USER_PRESET_BLUE,
-      NEO2_USER_PRESET_WHITE, NEO2_USER_PRESET_BRIGHTNESS
+    const LEDColor LEDLights2::defaultLEDColor = LEDColor(
+      LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE
+      OPTARG(HAS_WHITE_LED2, LED_USER_PRESET_WHITE)
+      OPTARG(NEOPIXEL_LED, LED_USER_PRESET_BRIGHTNESS)
     );
   #endif
 
@@ -190,7 +191,7 @@ void LEDLights::set_color(const LEDColor &incol
   void LEDLights2::set_color(const LEDColor &incol) {
     const uint32_t neocolor = LEDColorWhite() == incol
                             ? neo2.Color(NEO2_WHITE)
-                            : neo2.Color(incol.r, incol.g, incol.b, incol.w);
+                            : neo2.Color(incol.r, incol.g, incol.b OPTARG(HAS_WHITE_LED2, incol.w));
     neo2.set_brightness(incol.i);
     neo2.set_color(neocolor);
 

Marlin/src/feature/leds/leds.h

@@ -29,13 +29,15 @@
 
 #include <string.h>
 
-#if ENABLED(NEOPIXEL_LED)
-  #include "neopixel.h"
+// A white component can be passed
+#if EITHER(RGBW_LED, PCA9632_RGBW)
+  #define HAS_WHITE_LED 1
 #endif
 
-// A white component can be passed
-#if ANY(RGBW_LED, NEOPIXEL_LED, PCA9632_RGBW)
-  #define HAS_WHITE_LED 1
+#if ENABLED(NEOPIXEL_LED)
+  #define _NEOPIXEL_INCLUDE_
+  #include "neopixel.h"
+  #undef _NEOPIXEL_INCLUDE_
 #endif
 
 /**
@@ -43,46 +45,21 @@
  */
 typedef struct LEDColor {
   uint8_t r, g, b
-    #if HAS_WHITE_LED
-      , w
-      #if ENABLED(NEOPIXEL_LED)
-        , i
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w)
+    OPTARG(NEOPIXEL_LED, i)
   ;
 
   LEDColor() : r(255), g(255), b(255)
-    #if HAS_WHITE_LED
-      , w(255)
-      #if ENABLED(NEOPIXEL_LED)
-        , i(NEOPIXEL_BRIGHTNESS)
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w(255))
+    OPTARG(NEOPIXEL_LED, i(NEOPIXEL_BRIGHTNESS))
   {}
 
-  LEDColor(uint8_t r, uint8_t g, uint8_t b
-    #if HAS_WHITE_LED
-      , uint8_t w=0
-      #if ENABLED(NEOPIXEL_LED)
-        , uint8_t i=NEOPIXEL_BRIGHTNESS
-      #endif
-    #endif
-    ) : r(r), g(g), b(b)
-    #if HAS_WHITE_LED
-      , w(w)
-      #if ENABLED(NEOPIXEL_LED)
-        , i(i)
-      #endif
-    #endif
-  {}
+  LEDColor(uint8_t r, uint8_t g, uint8_t b OPTARG(HAS_WHITE_LED, uint8_t w=0) OPTARG(NEOPIXEL_LED, uint8_t i=NEOPIXEL_BRIGHTNESS))
+    : r(r), g(g), b(b) OPTARG(HAS_WHITE_LED, w(w)) OPTARG(NEOPIXEL_LED, i(i)) {}
 
   LEDColor(const uint8_t (&rgbw)[4]) : r(rgbw[0]), g(rgbw[1]), b(rgbw[2])
-    #if HAS_WHITE_LED
-      , w(rgbw[3])
-      #if ENABLED(NEOPIXEL_LED)
-        , i(NEOPIXEL_BRIGHTNESS)
-      #endif
-    #endif
+    OPTARG(HAS_WHITE_LED, w(rgbw[3]))
+    OPTARG(NEOPIXEL_LED, i(NEOPIXEL_BRIGHTNESS))
   {}
 
   LEDColor& operator=(const uint8_t (&rgbw)[4]) {
@@ -109,17 +86,8 @@ typedef struct LEDColor {
 } LEDColor;
 
 /**
- * Color helpers and presets
+ * Color presets
  */
-#if HAS_WHITE_LED
-  #if ENABLED(NEOPIXEL_LED)
-    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W, I)
-  #else
-    #define MakeLEDColor(R,G,B,W,I) LEDColor(R, G, B, W)
-  #endif
-#else
-  #define MakeLEDColor(R,G,B,W,I)   LEDColor(R, G, B)
-#endif
 
 #define LEDColorOff()             LEDColor(  0,   0,   0)
 #define LEDColorRed()             LEDColor(255,   0,   0)
@@ -147,25 +115,15 @@ public:
   static void setup(); // init()
 
   static void set_color(const LEDColor &color
-    #if ENABLED(NEOPIXEL_LED)
-      , bool isSequence=false
-    #endif
+    OPTARG(NEOPIXEL_IS_SEQUENTIAL, bool isSequence=false)
   );
 
   static inline void set_color(uint8_t r, uint8_t g, uint8_t b
-    #if HAS_WHITE_LED
-      , uint8_t w=0
-    #endif
-    #if ENABLED(NEOPIXEL_LED)
-      , uint8_t i=NEOPIXEL_BRIGHTNESS
-      , bool isSequence=false
-    #endif
+    OPTARG(HAS_WHITE_LED, uint8_t w=0)
+    OPTARG(NEOPIXEL_LED, uint8_t i=NEOPIXEL_BRIGHTNESS)
+    OPTARG(NEOPIXEL_IS_SEQUENTIAL, bool isSequence=false)
   ) {
-    set_color(MakeLEDColor(r, g, b, w, i)
-      #if ENABLED(NEOPIXEL_LED)
-        , isSequence
-      #endif
-    );
+    set_color(LEDColor(r, g, b OPTARG(HAS_WHITE_LED, w) OPTARG(NEOPIXEL_LED, i)) OPTARG(NEOPIXEL_IS_SEQUENTIAL, isSequence));
   }
 
   static inline void set_off()   { set_color(LEDColorOff()); }
@@ -223,8 +181,14 @@ extern LEDLights leds;
 
     static void set_color(const LEDColor &color);
 
-    inline void set_color(uint8_t r, uint8_t g, uint8_t b, uint8_t w=0, uint8_t i=NEOPIXEL2_BRIGHTNESS) {
-      set_color(MakeLEDColor(r, g, b, w, i));
+    static inline void set_color(uint8_t r, uint8_t g, uint8_t b
+      OPTARG(HAS_WHITE_LED, uint8_t w=0)
+      OPTARG(NEOPIXEL_LED, uint8_t i=NEOPIXEL_BRIGHTNESS)
+    ) {
+      set_color(LEDColor(r, g, b
+        OPTARG(HAS_WHITE_LED, w)
+        OPTARG(NEOPIXEL_LED, i)
+      ));
     }
 
     static inline void set_off()   { set_color(LEDColorOff()); }

Marlin/src/feature/leds/neopixel.cpp

@@ -28,7 +28,7 @@
 
 #if ENABLED(NEOPIXEL_LED)
 
-#include "neopixel.h"
+#include "leds.h"
 
 #if EITHER(NEOPIXEL_STARTUP_TEST, NEOPIXEL2_STARTUP_TEST)
   #include "../../core/utility.h"
@@ -37,17 +37,21 @@
 Marlin_NeoPixel neo;
 int8_t Marlin_NeoPixel::neoindex;
 
-Adafruit_NeoPixel Marlin_NeoPixel::adaneo1(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800)
-  #if CONJOINED_NEOPIXEL
-    , Marlin_NeoPixel::adaneo2(NEOPIXEL_PIXELS, NEOPIXEL2_PIN, NEOPIXEL2_TYPE + NEO_KHZ800)
-  #endif
-;
+Adafruit_NeoPixel Marlin_NeoPixel::adaneo1(NEOPIXEL_PIXELS, NEOPIXEL_PIN, NEOPIXEL_TYPE + NEO_KHZ800);
+#if CONJOINED_NEOPIXEL
+  Adafruit_NeoPixel Marlin_NeoPixel::adaneo2(NEOPIXEL_PIXELS, NEOPIXEL2_PIN, NEOPIXEL2_TYPE + NEO_KHZ800);
+#endif
 
-#ifdef NEOPIXEL_BKGD_LED_INDEX
+#ifdef NEOPIXEL_BKGD_INDEX_FIRST
 
-  void Marlin_NeoPixel::set_color_background() {
-    uint8_t background_color[4] = NEOPIXEL_BKGD_COLOR;
-    set_pixel_color(NEOPIXEL_BKGD_LED_INDEX, adaneo1.Color(background_color[0], background_color[1], background_color[2], background_color[3]));
+  void Marlin_NeoPixel::set_background_color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
+    for  (int background_led = NEOPIXEL_BKGD_INDEX_FIRST; background_led <= NEOPIXEL_BKGD_INDEX_LAST; background_led++)
+      set_pixel_color(background_led, adaneo1.Color(r, g, b, w));
+  }
+
+  void Marlin_NeoPixel::reset_background_color() {
+    constexpr uint8_t background_color[4] = NEOPIXEL_BKGD_COLOR;
+    set_background_color(background_color[0], background_color[1], background_color[2], background_color[3]);
   }
 
 #endif
@@ -59,9 +63,10 @@ void Marlin_NeoPixel::set_color(const uint32_t color) {
   }
   else {
     for (uint16_t i = 0; i < pixels(); ++i) {
-      #ifdef NEOPIXEL_BKGD_LED_INDEX
-        if (i == NEOPIXEL_BKGD_LED_INDEX && TERN(NEOPIXEL_BKGD_ALWAYS_ON, true, color != 0x000000)) {
-          set_color_background();
+      #ifdef NEOPIXEL_BKGD_INDEX_FIRST
+        if (i == NEOPIXEL_BKGD_INDEX_FIRST && TERN(NEOPIXEL_BKGD_ALWAYS_ON, true, color != 0x000000)) {
+          reset_background_color();
+          i += NEOPIXEL_BKGD_INDEX_LAST - (NEOPIXEL_BKGD_INDEX_FIRST);
           continue;
         }
       #endif
@@ -90,36 +95,23 @@ void Marlin_NeoPixel::init() {
     safe_delay(500);
     set_color_startup(adaneo1.Color(0, 0, 255, 0));  // blue
     safe_delay(500);
+    #if HAS_WHITE_LED
+      set_color_startup(adaneo1.Color(0, 0, 0, 255));  // white
+      safe_delay(500);
+    #endif
   #endif
 
-  #ifdef NEOPIXEL_BKGD_LED_INDEX
-    set_color_background();
+  #ifdef NEOPIXEL_BKGD_INDEX_FIRST
+    reset_background_color();
   #endif
 
-  #if ENABLED(LED_USER_PRESET_STARTUP)
-    set_color(adaneo1.Color(LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE));
-  #else
-    set_color(adaneo1.Color(0, 0, 0, 0));
-  #endif
+  set_color(adaneo1.Color
+    TERN(LED_USER_PRESET_STARTUP,
+      (LED_USER_PRESET_RED, LED_USER_PRESET_GREEN, LED_USER_PRESET_BLUE, LED_USER_PRESET_WHITE),
+      (0, 0, 0, 0))
+  );
 }
 
-#if 0
-bool Marlin_NeoPixel::set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p) {
-  const uint32_t color = adaneo1.Color(r, g, b, w);
-  set_brightness(p);
-  #if DISABLED(NEOPIXEL_IS_SEQUENTIAL)
-    set_color(color);
-    return false;
-  #else
-    static uint16_t nextLed = 0;
-    set_pixel_color(nextLed, color);
-    show();
-    if (++nextLed >= pixels()) nextLed = 0;
-    return true;
-  #endif
-}
-#endif
-
 #if ENABLED(NEOPIXEL2_SEPARATE)
 
   Marlin_NeoPixel2 neo2;
@@ -158,13 +150,17 @@ bool Marlin_NeoPixel::set_led_color(const uint8_t r, const uint8_t g, const uint
       safe_delay(500);
       set_color_startup(adaneo.Color(0, 0, 255, 0));  // blue
       safe_delay(500);
+      #if HAS_WHITE_LED2
+        set_color_startup(adaneo.Color(0, 0, 0, 255));  // white
+        safe_delay(500);
+      #endif
     #endif
 
-    #if ENABLED(NEO2_USER_PRESET_STARTUP)
-      set_color(adaneo.Color(NEO2_USER_PRESET_RED, NEO2_USER_PRESET_GREEN, NEO2_USER_PRESET_BLUE, NEO2_USER_PRESET_WHITE));
-    #else
-      set_color(adaneo.Color(0, 0, 0, 0));
-    #endif
+    set_color(adaneo.Color
+      TERN(NEO2_USER_PRESET_STARTUP,
+        (NEO2_USER_PRESET_RED, NEO2_USER_PRESET_GREEN, NEO2_USER_PRESET_BLUE, NEO2_USER_PRESET_WHITE),
+        (0, 0, 0, 0))
+    );
   }
 
 #endif // NEOPIXEL2_SEPARATE

Marlin/src/feature/leds/neopixel.h

@@ -25,6 +25,10 @@
  * NeoPixel support
  */
 
+#ifndef _NEOPIXEL_INCLUDE_
+  #error "Always include 'leds.h' and not 'neopixel.h' directly."
+#endif
+
 // ------------------------
 // Includes
 // ------------------------
@@ -38,6 +42,18 @@
 // Defines
 // ------------------------
 
+#define _NEO_IS_RGB(N) (N == NEO_RGB || N == NEO_RBG || N == NEO_GRB || N == NEO_GBR || N == NEO_BRG || N == NEO_BGR)
+
+#if !_NEO_IS_RGB(NEOPIXEL_TYPE)
+  #define HAS_WHITE_LED 1
+#endif
+
+#if HAS_WHITE_LED
+  #define NEO_WHITE 0, 0, 0, 255
+#else
+  #define NEO_WHITE 255, 255, 255
+#endif
+
 #if defined(NEOPIXEL2_TYPE) && NEOPIXEL2_TYPE != NEOPIXEL_TYPE && DISABLED(NEOPIXEL2_SEPARATE)
   #define MULTIPLE_NEOPIXEL_TYPES 1
 #endif
@@ -46,29 +62,16 @@
   #define CONJOINED_NEOPIXEL 1
 #endif
 
-#if NEOPIXEL_TYPE == NEO_RGB || NEOPIXEL_TYPE == NEO_RBG || NEOPIXEL_TYPE == NEO_GRB || NEOPIXEL_TYPE == NEO_GBR || NEOPIXEL_TYPE == NEO_BRG || NEOPIXEL_TYPE == NEO_BGR
-  #define NEOPIXEL_IS_RGB 1
-#else
-  #define NEOPIXEL_IS_RGBW 1
-#endif
-
-#if NEOPIXEL_IS_RGB
-  #define NEO_WHITE 255, 255, 255, 0
-#else
-  #define NEO_WHITE 0, 0, 0, 255
-#endif
-
 // ------------------------
 // Function prototypes
 // ------------------------
 
 class Marlin_NeoPixel {
 private:
-  static Adafruit_NeoPixel adaneo1
-    #if CONJOINED_NEOPIXEL
-      , adaneo2
-    #endif
-  ;
+  static Adafruit_NeoPixel adaneo1;
+  #if CONJOINED_NEOPIXEL
+    static Adafruit_NeoPixel adaneo2;
+  #endif
 
 public:
   static int8_t neoindex;
@@ -78,8 +81,9 @@ public:
 
   static void set_color(const uint32_t c);
 
-  #ifdef NEOPIXEL_BKGD_LED_INDEX
-    static void set_color_background();
+  #ifdef NEOPIXEL_BKGD_INDEX_FIRST
+    static void set_background_color(uint8_t r, uint8_t g, uint8_t b, uint8_t w);
+    static void reset_background_color();
   #endif
 
   static inline void begin() {
@@ -93,9 +97,7 @@ public:
       else adaneo1.setPixelColor(n, c);
     #else
       adaneo1.setPixelColor(n, c);
-      #if MULTIPLE_NEOPIXEL_TYPES
-        adaneo2.setPixelColor(n, c);
-      #endif
+      TERN_(MULTIPLE_NEOPIXEL_TYPES, adaneo2.setPixelColor(n, c));
     #endif
   }
 
@@ -120,15 +122,13 @@ public:
     TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
   }
 
-  #if 0
-    bool set_led_color(const uint8_t r, const uint8_t g, const uint8_t b, const uint8_t w, const uint8_t p);
-  #endif
-
   // Accessors
-  static inline uint16_t pixels() { TERN(NEOPIXEL2_INSERIES, return adaneo1.numPixels() * 2, return adaneo1.numPixels()); }
+  static inline uint16_t pixels() { return adaneo1.numPixels() * TERN1(NEOPIXEL2_INSERIES, 2); }
+
   static inline uint8_t brightness() { return adaneo1.getBrightness(); }
-  static inline uint32_t Color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
-    return adaneo1.Color(r, g, b, w);
+
+  static inline uint32_t Color(uint8_t r, uint8_t g, uint8_t b OPTARG(HAS_WHITE_LED, uint8_t w)) {
+    return adaneo1.Color(r, g, b OPTARG(HAS_WHITE_LED, w));
   }
 };
 
@@ -137,15 +137,12 @@ extern Marlin_NeoPixel neo;
 // Neo pixel channel 2
 #if ENABLED(NEOPIXEL2_SEPARATE)
 
-  #if NEOPIXEL2_TYPE == NEO_RGB || NEOPIXEL2_TYPE == NEO_RBG || NEOPIXEL2_TYPE == NEO_GRB || NEOPIXEL2_TYPE == NEO_GBR || NEOPIXEL2_TYPE == NEO_BRG || NEOPIXEL2_TYPE == NEO_BGR
+  #if _NEO_IS_RGB(NEOPIXEL2_TYPE)
     #define NEOPIXEL2_IS_RGB 1
+    #define NEO2_WHITE 255, 255, 255
   #else
     #define NEOPIXEL2_IS_RGBW 1
-  #endif
-
-  #if NEOPIXEL2_IS_RGB
-    #define NEO2_WHITE 255, 255, 255, 0
-  #else
+    #define HAS_WHITE_LED2 1      // A white component can be passed for NEOPIXEL2
     #define NEO2_WHITE 0, 0, 0, 255
   #endif
 
@@ -172,11 +169,13 @@ extern Marlin_NeoPixel neo;
     // Accessors
     static inline uint16_t pixels() { return adaneo.numPixels();}
     static inline uint8_t brightness() { return adaneo.getBrightness(); }
-    static inline uint32_t Color(uint8_t r, uint8_t g, uint8_t b, uint8_t w) {
-      return adaneo.Color(r, g, b, w);
+    static inline uint32_t Color(uint8_t r, uint8_t g, uint8_t b OPTARG(HAS_WHITE_LED2, uint8_t w)) {
+      return adaneo.Color(r, g, b OPTARG(HAS_WHITE_LED2, w));
     }
   };
 
   extern Marlin_NeoPixel2 neo2;
 
 #endif // NEOPIXEL2_SEPARATE
+
+#undef _NEO_IS_RGB

Marlin/src/feature/leds/pca9632.cpp

@@ -93,9 +93,7 @@ static void PCA9632_WriteRegister(const byte addr, const byte regadd, const byte
 }
 
 static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const byte vr, const byte vg, const byte vb
-  #if ENABLED(PCA9632_RGBW)
-    , const byte vw
-  #endif
+  OPTARG(PCA9632_RGBW, const byte vw)
 ) {
   #if DISABLED(PCA9632_NO_AUTO_INC)
     uint8_t data[4];
@@ -143,9 +141,7 @@ void PCA9632_set_led_color(const LEDColor &color) {
                     ;
 
   PCA9632_WriteAllRegisters(PCA9632_ADDRESS,PCA9632_PWM0, color.r, color.g, color.b
-    #if ENABLED(PCA9632_RGBW)
-      , color.w
-    #endif
+    OPTARG(PCA9632_RGBW, color.w)
   );
   PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_LEDOUT, LEDOUT);
 }

Marlin/src/feature/leds/printer_event_leds.cpp

@@ -45,12 +45,10 @@ PrinterEventLEDs printerEventLEDs;
     return (uint8_t)map(constrain(current, start, target), start, target, 0, 255);
   }
 
-  inline void pel_set_rgb(const uint8_t r, const uint8_t g, const uint8_t b) {
+  inline void pel_set_rgb(const uint8_t r, const uint8_t g, const uint8_t b OPTARG(HAS_WHITE_LED, const uint8_t w=0)) {
     leds.set_color(
-      MakeLEDColor(r, g, b, 0, neo.brightness())
-      #if ENABLED(NEOPIXEL_IS_SEQUENTIAL)
-        , true
-      #endif
+      LEDColor(r, g, b OPTARG(HAS_WHITE_LED, w) OPTARG(NEOPIXEL_LED, neo.brightness()))
+      OPTARG(NEOPIXEL_IS_SEQUENTIAL, true)
     );
   }
 

Marlin/src/feature/mmu/mmu.cpp

@@ -24,7 +24,14 @@
 
 #if HAS_PRUSA_MMU1
 
-#include "../module/stepper.h"
+#include "../MarlinCore.h"
+#include "../module/planner.h"
+
+void mmu_init() {
+  SET_OUTPUT(E_MUX0_PIN);
+  SET_OUTPUT(E_MUX1_PIN);
+  SET_OUTPUT(E_MUX2_PIN);
+}
 
 void select_multiplexed_stepper(const uint8_t e) {
   planner.synchronize();

Marlin/src/feature/mmu/mmu.h

@@ -21,4 +21,5 @@
  */
 #pragma once
 
+void mmu_init();
 void select_multiplexed_stepper(const uint8_t e);

Marlin/src/feature/probe_temp_comp.h

@@ -64,7 +64,7 @@ typedef struct {
 #ifndef BTC_SAMPLE_COUNT
   #define BTC_SAMPLE_COUNT 10U
 #endif
-#ifndef BTC_SAMPLE_STEP
+#ifndef BTC_SAMPLE_RES
   #define BTC_SAMPLE_RES 5
 #endif
 #ifndef BTC_SAMPLE_START

Marlin/src/feature/tmc_util.cpp

@@ -417,6 +417,21 @@
       }
       #endif
 
+      #if AXIS_IS_TMC(I)
+        if (monitor_tmc_driver(stepperI, need_update_error_counters, need_debug_reporting))
+          step_current_down(stepperI);
+      #endif
+
+      #if AXIS_IS_TMC(J)
+        if (monitor_tmc_driver(stepperJ, need_update_error_counters, need_debug_reporting))
+          step_current_down(stepperJ);
+      #endif
+
+      #if AXIS_IS_TMC(K)
+        if (monitor_tmc_driver(stepperK, need_update_error_counters, need_debug_reporting))
+          step_current_down(stepperK);
+      #endif
+
       #if AXIS_IS_TMC(E0)
         (void)monitor_tmc_driver(stepperE0, need_update_error_counters, need_debug_reporting);
       #endif
@@ -757,128 +772,148 @@
     }
   }
 
-  static void tmc_debug_loop(const TMC_debug_enum i, const bool print_x, const bool print_y, const bool print_z, const bool print_e) {
-    if (print_x) {
+  static void tmc_debug_loop(const TMC_debug_enum n, LOGICAL_AXIS_ARGS(const bool)) {
+    if (x) {
       #if AXIS_IS_TMC(X)
-        tmc_status(stepperX, i);
+        tmc_status(stepperX, n);
       #endif
       #if AXIS_IS_TMC(X2)
-        tmc_status(stepperX2, i);
+        tmc_status(stepperX2, n);
       #endif
     }
 
-    if (print_y) {
+    if (TERN0(HAS_Y_AXIS, y)) {
       #if AXIS_IS_TMC(Y)
-        tmc_status(stepperY, i);
+        tmc_status(stepperY, n);
       #endif
       #if AXIS_IS_TMC(Y2)
-        tmc_status(stepperY2, i);
+        tmc_status(stepperY2, n);
       #endif
     }
 
-    if (print_z) {
+    if (TERN0(HAS_Z_AXIS, z)) {
       #if AXIS_IS_TMC(Z)
-        tmc_status(stepperZ, i);
+        tmc_status(stepperZ, n);
       #endif
       #if AXIS_IS_TMC(Z2)
-        tmc_status(stepperZ2, i);
+        tmc_status(stepperZ2, n);
       #endif
       #if AXIS_IS_TMC(Z3)
-        tmc_status(stepperZ3, i);
+        tmc_status(stepperZ3, n);
       #endif
       #if AXIS_IS_TMC(Z4)
-        tmc_status(stepperZ4, i);
+        tmc_status(stepperZ4, n);
       #endif
     }
 
-    if (print_e) {
+    #if AXIS_IS_TMC(I)
+      if (i) tmc_status(stepperI, n);
+    #endif
+    #if AXIS_IS_TMC(J)
+      if (j) tmc_status(stepperJ, n);
+    #endif
+    #if AXIS_IS_TMC(K)
+      if (k) tmc_status(stepperK, n);
+    #endif
+
+    if (TERN0(HAS_EXTRUDERS, e)) {
       #if AXIS_IS_TMC(E0)
-        tmc_status(stepperE0, i);
+        tmc_status(stepperE0, n);
       #endif
       #if AXIS_IS_TMC(E1)
-        tmc_status(stepperE1, i);
+        tmc_status(stepperE1, n);
       #endif
       #if AXIS_IS_TMC(E2)
-        tmc_status(stepperE2, i);
+        tmc_status(stepperE2, n);
       #endif
       #if AXIS_IS_TMC(E3)
-        tmc_status(stepperE3, i);
+        tmc_status(stepperE3, n);
       #endif
       #if AXIS_IS_TMC(E4)
-        tmc_status(stepperE4, i);
+        tmc_status(stepperE4, n);
       #endif
       #if AXIS_IS_TMC(E5)
-        tmc_status(stepperE5, i);
+        tmc_status(stepperE5, n);
       #endif
       #if AXIS_IS_TMC(E6)
-        tmc_status(stepperE6, i);
+        tmc_status(stepperE6, n);
       #endif
       #if AXIS_IS_TMC(E7)
-        tmc_status(stepperE7, i);
+        tmc_status(stepperE7, n);
       #endif
     }
 
     SERIAL_EOL();
   }
 
-  static void drv_status_loop(const TMC_drv_status_enum i, const bool print_x, const bool print_y, const bool print_z, const bool print_e) {
-    if (print_x) {
+  static void drv_status_loop(const TMC_drv_status_enum n, LOGICAL_AXIS_ARGS(const bool)) {
+    if (x) {
       #if AXIS_IS_TMC(X)
-        tmc_parse_drv_status(stepperX, i);
+        tmc_parse_drv_status(stepperX, n);
       #endif
       #if AXIS_IS_TMC(X2)
-        tmc_parse_drv_status(stepperX2, i);
+        tmc_parse_drv_status(stepperX2, n);
       #endif
     }
 
-    if (print_y) {
+    if (TERN0(HAS_Y_AXIS, y)) {
       #if AXIS_IS_TMC(Y)
-        tmc_parse_drv_status(stepperY, i);
+        tmc_parse_drv_status(stepperY, n);
       #endif
       #if AXIS_IS_TMC(Y2)
-        tmc_parse_drv_status(stepperY2, i);
+        tmc_parse_drv_status(stepperY2, n);
       #endif
     }
 
-    if (print_z) {
+    if (TERN0(HAS_Z_AXIS, z)) {
       #if AXIS_IS_TMC(Z)
-        tmc_parse_drv_status(stepperZ, i);
+        tmc_parse_drv_status(stepperZ, n);
       #endif
       #if AXIS_IS_TMC(Z2)
-        tmc_parse_drv_status(stepperZ2, i);
+        tmc_parse_drv_status(stepperZ2, n);
       #endif
       #if AXIS_IS_TMC(Z3)
-        tmc_parse_drv_status(stepperZ3, i);
+        tmc_parse_drv_status(stepperZ3, n);
       #endif
       #if AXIS_IS_TMC(Z4)
-        tmc_parse_drv_status(stepperZ4, i);
+        tmc_parse_drv_status(stepperZ4, n);
       #endif
     }
 
-    if (print_e) {
+    #if AXIS_IS_TMC(I)
+      if (i) tmc_parse_drv_status(stepperI, n);
+    #endif
+    #if AXIS_IS_TMC(J)
+      if (j) tmc_parse_drv_status(stepperJ, n);
+    #endif
+    #if AXIS_IS_TMC(K)
+      if (k) tmc_parse_drv_status(stepperK, n);
+    #endif
+
+    if (TERN0(HAS_EXTRUDERS, e)) {
       #if AXIS_IS_TMC(E0)
-        tmc_parse_drv_status(stepperE0, i);
+        tmc_parse_drv_status(stepperE0, n);
       #endif
       #if AXIS_IS_TMC(E1)
-        tmc_parse_drv_status(stepperE1, i);
+        tmc_parse_drv_status(stepperE1, n);
       #endif
       #if AXIS_IS_TMC(E2)
-        tmc_parse_drv_status(stepperE2, i);
+        tmc_parse_drv_status(stepperE2, n);
       #endif
       #if AXIS_IS_TMC(E3)
-        tmc_parse_drv_status(stepperE3, i);
+        tmc_parse_drv_status(stepperE3, n);
       #endif
       #if AXIS_IS_TMC(E4)
-        tmc_parse_drv_status(stepperE4, i);
+        tmc_parse_drv_status(stepperE4, n);
       #endif
       #if AXIS_IS_TMC(E5)
-        tmc_parse_drv_status(stepperE5, i);
+        tmc_parse_drv_status(stepperE5, n);
       #endif
       #if AXIS_IS_TMC(E6)
-        tmc_parse_drv_status(stepperE6, i);
+        tmc_parse_drv_status(stepperE6, n);
       #endif
       #if AXIS_IS_TMC(E7)
-        tmc_parse_drv_status(stepperE7, i);
+        tmc_parse_drv_status(stepperE7, n);
       #endif
     }
 
@@ -889,9 +924,10 @@
    * M122 report functions
    */
 
-  void tmc_report_all(const bool print_x/*=true*/, const bool print_y/*=true*/, const bool print_z/*=true*/, const bool print_e/*=true*/) {
-    #define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL);  tmc_debug_loop(ITEM, print_x, print_y, print_z, print_e); }while(0)
-    #define DRV_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); drv_status_loop(ITEM, print_x, print_y, print_z, print_e); }while(0)
+  void tmc_report_all(LOGICAL_AXIS_ARGS(const bool)) {
+    #define TMC_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_debug_loop(ITEM, LOGICAL_AXIS_ARGS()); }while(0)
+    #define DRV_REPORT(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); drv_status_loop(ITEM, LOGICAL_AXIS_ARGS()); }while(0)
+
     TMC_REPORT("\t",                 TMC_CODES);
     #if HAS_DRIVER(TMC2209)
       TMC_REPORT("Address\t",        TMC_UART_ADDR);
@@ -1015,72 +1051,82 @@
     }
   #endif
 
-  static void tmc_get_registers(TMC_get_registers_enum i, const bool print_x, const bool print_y, const bool print_z, const bool print_e) {
-    if (print_x) {
+  static void tmc_get_registers(TMC_get_registers_enum n, LOGICAL_AXIS_ARGS(const bool)) {
+    if (x) {
       #if AXIS_IS_TMC(X)
-        tmc_get_registers(stepperX, i);
+        tmc_get_registers(stepperX, n);
       #endif
       #if AXIS_IS_TMC(X2)
-        tmc_get_registers(stepperX2, i);
+        tmc_get_registers(stepperX2, n);
       #endif
     }
 
-    if (print_y) {
+    if (TERN0(HAS_Y_AXIS, y)) {
       #if AXIS_IS_TMC(Y)
-        tmc_get_registers(stepperY, i);
+        tmc_get_registers(stepperY, n);
       #endif
       #if AXIS_IS_TMC(Y2)
-        tmc_get_registers(stepperY2, i);
+        tmc_get_registers(stepperY2, n);
       #endif
     }
 
-    if (print_z) {
+    if (TERN0(HAS_Z_AXIS, z)) {
       #if AXIS_IS_TMC(Z)
-        tmc_get_registers(stepperZ, i);
+        tmc_get_registers(stepperZ, n);
       #endif
       #if AXIS_IS_TMC(Z2)
-        tmc_get_registers(stepperZ2, i);
+        tmc_get_registers(stepperZ2, n);
       #endif
       #if AXIS_IS_TMC(Z3)
-        tmc_get_registers(stepperZ3, i);
+        tmc_get_registers(stepperZ3, n);
       #endif
       #if AXIS_IS_TMC(Z4)
-        tmc_get_registers(stepperZ4, i);
+        tmc_get_registers(stepperZ4, n);
       #endif
     }
 
-    if (print_e) {
+    #if AXIS_IS_TMC(I)
+      if (i) tmc_get_registers(stepperI, n);
+    #endif
+    #if AXIS_IS_TMC(J)
+      if (j) tmc_get_registers(stepperJ, n);
+    #endif
+    #if AXIS_IS_TMC(K)
+      if (k) tmc_get_registers(stepperK, n);
+    #endif
+
+    if (TERN0(HAS_EXTRUDERS, e)) {
       #if AXIS_IS_TMC(E0)
-        tmc_get_registers(stepperE0, i);
+        tmc_get_registers(stepperE0, n);
       #endif
       #if AXIS_IS_TMC(E1)
-        tmc_get_registers(stepperE1, i);
+        tmc_get_registers(stepperE1, n);
       #endif
       #if AXIS_IS_TMC(E2)
-        tmc_get_registers(stepperE2, i);
+        tmc_get_registers(stepperE2, n);
       #endif
       #if AXIS_IS_TMC(E3)
-        tmc_get_registers(stepperE3, i);
+        tmc_get_registers(stepperE3, n);
       #endif
       #if AXIS_IS_TMC(E4)
-        tmc_get_registers(stepperE4, i);
+        tmc_get_registers(stepperE4, n);
       #endif
       #if AXIS_IS_TMC(E5)
-        tmc_get_registers(stepperE5, i);
+        tmc_get_registers(stepperE5, n);
       #endif
       #if AXIS_IS_TMC(E6)
-        tmc_get_registers(stepperE6, i);
+        tmc_get_registers(stepperE6, n);
       #endif
       #if AXIS_IS_TMC(E7)
-        tmc_get_registers(stepperE7, i);
+        tmc_get_registers(stepperE7, n);
       #endif
     }
 
     SERIAL_EOL();
   }
 
-  void tmc_get_registers(bool print_x, bool print_y, bool print_z, bool print_e) {
-    #define _TMC_GET_REG(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_get_registers(ITEM, print_x, print_y, print_z, print_e); }while(0)
+  void tmc_get_registers(LOGICAL_AXIS_ARGS(bool)) {
+    #define _TMC_GET_REG(LABEL, ITEM) do{ SERIAL_ECHOPGM(LABEL); tmc_get_registers(ITEM, LOGICAL_AXIS_ARGS()); }while(0)
     #define TMC_GET_REG(NAME, TABS) _TMC_GET_REG(STRINGIFY(NAME) TABS, TMC_GET_##NAME)
     _TMC_GET_REG("\t", TMC_AXIS_CODES);
     TMC_GET_REG(GCONF, "\t\t");
@@ -1165,6 +1211,15 @@
     #if AXIS_HAS_SPI(Z4)
       SET_CS_PIN(Z4);
     #endif
+    #if AXIS_HAS_SPI(I)
+      SET_CS_PIN(I);
+    #endif
+    #if AXIS_HAS_SPI(J)
+      SET_CS_PIN(J);
+    #endif
+    #if AXIS_HAS_SPI(K)
+      SET_CS_PIN(K);
+    #endif
     #if AXIS_HAS_SPI(E0)
       SET_CS_PIN(E0);
     #endif
@@ -1214,10 +1269,10 @@ static bool test_connection(TMC &st) {
   return test_result;
 }
 
-void test_tmc_connection(const bool test_x/*=true*/, const bool test_y/*=true*/, const bool test_z/*=true*/, const bool test_e/*=true*/) {
+void test_tmc_connection(LOGICAL_AXIS_ARGS(const bool)) {
   uint8_t axis_connection = 0;
 
-  if (test_x) {
+  if (x) {
     #if AXIS_IS_TMC(X)
       axis_connection += test_connection(stepperX);
     #endif
@@ -1226,7 +1281,7 @@ void test_tmc_connection(const bool test_x/*=true*/, const bool test_y/*=true*/,
     #endif
   }
 
-  if (test_y) {
+  if (TERN0(HAS_Y_AXIS, y)) {
     #if AXIS_IS_TMC(Y)
       axis_connection += test_connection(stepperY);
     #endif
@@ -1235,7 +1290,7 @@ void test_tmc_connection(const bool test_x/*=true*/, const bool test_y/*=true*/,
     #endif
   }
 
-  if (test_z) {
+  if (TERN0(HAS_Z_AXIS, z)) {
     #if AXIS_IS_TMC(Z)
       axis_connection += test_connection(stepperZ);
     #endif
@@ -1250,7 +1305,17 @@ void test_tmc_connection(const bool test_x/*=true*/, const bool test_y/*=true*/,
     #endif
   }
 
-  if (test_e) {
+  #if AXIS_IS_TMC(I)
+    if (i) axis_connection += test_connection(stepperI);
+  #endif
+  #if AXIS_IS_TMC(J)
+    if (j) axis_connection += test_connection(stepperJ);
+  #endif
+  #if AXIS_IS_TMC(K)
+    if (k) axis_connection += test_connection(stepperK);
+  #endif
+
+  if (TERN0(HAS_EXTRUDERS, e)) {
     #if AXIS_IS_TMC(E0)
       axis_connection += test_connection(stepperE0);
     #endif

Marlin/src/feature/tmc_util.h

@@ -70,15 +70,9 @@ class TMCStorage {
     }
 
     struct {
-      #if ENABLED(HAS_STEALTHCHOP)
-        bool stealthChop_enabled = false;
-      #endif
-      #if ENABLED(HYBRID_THRESHOLD)
-        uint8_t hybrid_thrs = 0;
-      #endif
-      #if ENABLED(USE_SENSORLESS)
-        int16_t homing_thrs = 0;
-      #endif
+      OPTCODE(HAS_STEALTHCHOP,  bool stealthChop_enabled = false)
+      OPTCODE(HYBRID_THRESHOLD, uint8_t hybrid_thrs = 0)
+      OPTCODE(USE_SENSORLESS,   int16_t homing_thrs = 0)
     } stored;
 };
 
@@ -341,14 +335,14 @@ void tmc_print_current(TMC &st) {
 #endif
 
 void monitor_tmc_drivers();
-void test_tmc_connection(const bool test_x=true, const bool test_y=true, const bool test_z=true, const bool test_e=true);
+void test_tmc_connection(LOGICAL_AXIS_DECL(const bool, true));
 
 #if ENABLED(TMC_DEBUG)
   #if ENABLED(MONITOR_DRIVER_STATUS)
     void tmc_set_report_interval(const uint16_t update_interval);
   #endif
-  void tmc_report_all(const bool print_x=true, const bool print_y=true, const bool print_z=true, const bool print_e=true);
-  void tmc_get_registers(const bool print_x, const bool print_y, const bool print_z, const bool print_e);
+  void tmc_report_all(LOGICAL_AXIS_DECL(const bool, true));
+  void tmc_get_registers(LOGICAL_AXIS_ARGS(const bool));
 #endif
 
 /**
@@ -361,7 +355,7 @@ void test_tmc_connection(const bool test_x=true, const bool test_y=true, const b
 #if USE_SENSORLESS
 
   // Track enabled status of stealthChop and only re-enable where applicable
-  struct sensorless_t { bool x, y, z, x2, y2, z2, z3, z4; };
+  struct sensorless_t { bool LINEAR_AXIS_ARGS(), x2, y2, z2, z3, z4; };
 
   #if ENABLED(IMPROVE_HOMING_RELIABILITY)
     extern millis_t sg_guard_period;

Marlin/src/gcode/bedlevel/G26.cpp

@@ -330,12 +330,8 @@ typedef struct {
         thermalManager.setTargetBed(bed_temp);
 
         // Wait for the temperature to stabilize
-        if (!thermalManager.wait_for_bed(true
-            #if G26_CLICK_CAN_CANCEL
-              , true
-            #endif
-          )
-        ) return G26_ERR;
+        if (!thermalManager.wait_for_bed(true OPTARG(G26_CLICK_CAN_CANCEL, true)))
+          return G26_ERR;
       }
 
     #else
@@ -352,11 +348,8 @@ typedef struct {
     thermalManager.setTargetHotend(hotend_temp, active_extruder);
 
     // Wait for the temperature to stabilize
-    if (!thermalManager.wait_for_hotend(active_extruder, true
-      #if G26_CLICK_CAN_CANCEL
-        , true
-      #endif
-    )) return G26_ERR;
+    if (!thermalManager.wait_for_hotend(active_extruder, true OPTARG(G26_CLICK_CAN_CANCEL, true)))
+      return G26_ERR;
 
     #if HAS_WIRED_LCD
       ui.reset_status();

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -689,7 +689,7 @@ G29_TYPE GcodeSuite::G29() {
         TERN_(HAS_STATUS_MESSAGE, ui.status_printf_P(0, PSTR(S_FMT " %i/3"), GET_TEXT(MSG_PROBING_MESH), int(i + 1)));
 
         // Retain the last probe position
-        abl.probePos = points[i];
+        abl.probePos = xy_pos_t(points[i]);
         abl.measured_z = faux ? 0.001 * random(-100, 101) : probe.probe_at_point(abl.probePos, raise_after, abl.verbose_level);
         if (isnan(abl.measured_z)) {
           set_bed_leveling_enabled(abl.reenable);
@@ -795,7 +795,7 @@ G29_TYPE GcodeSuite::G29() {
               const int ind = abl.indexIntoAB[xx][yy];
               xyz_float_t tmp = { abl.eqnAMatrix[ind + 0 * abl.abl_points],
                                   abl.eqnAMatrix[ind + 1 * abl.abl_points], 0 };
-              planner.bed_level_matrix.apply_rotation_xyz(tmp);
+              planner.bed_level_matrix.apply_rotation_xyz(tmp.x, tmp.y, tmp.z);
               if (get_min) NOMORE(min_diff, abl.eqnBVector[ind] - tmp.z);
               const float subval = get_min ? abl.mean : tmp.z + min_diff,
                             diff = abl.eqnBVector[ind] - subval;

Marlin/src/gcode/calibrate/G28.cpp

@@ -321,33 +321,46 @@ void GcodeSuite::G28() {
 
   #else
 
-    const bool homeZ = parser.seen_test('Z'),
-               needX = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(X_AXIS))),
-               needY = homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(Y_AXIS))),
-               homeX = needX || parser.seen_test('X'), homeY = needY || parser.seen_test('Y'),
-               home_all = homeX == homeY && homeX == homeZ, // All or None
-               doX = home_all || homeX, doY = home_all || homeY, doZ = home_all || homeZ;
+    #define _UNSAFE(A) (homeZ && TERN0(Z_SAFE_HOMING, axes_should_home(_BV(A##_AXIS))))
 
-    #if ENABLED(HOME_Z_FIRST)
-
-      if (doZ) homeaxis(Z_AXIS);
+    const bool homeZ = TERN0(HAS_Z_AXIS, parser.seen_test('Z')),
+               LINEAR_AXIS_LIST(              // Other axes should be homed before Z safe-homing
+                 needX = _UNSAFE(X), needY = _UNSAFE(Y), needZ = false, // UNUSED
+                 needI = _UNSAFE(I), needJ = _UNSAFE(J), needK = _UNSAFE(K)
+               ),
+               LINEAR_AXIS_LIST(              // Home each axis if needed or flagged
+                 homeX = needX || parser.seen_test('X'),
+                 homeY = needY || parser.seen_test('Y'),
+                 homeZZ = homeZ,
+                 homeI = needI || parser.seen_test(AXIS4_NAME), homeJ = needJ || parser.seen_test(AXIS5_NAME), homeK = needK || parser.seen_test(AXIS6_NAME),
+               ),
+               home_all = LINEAR_AXIS_GANG(   // Home-all if all or none are flagged
+                    homeX == homeX, && homeY == homeX, && homeZ == homeX,
+                 && homeI == homeX, && homeJ == homeX, && homeK == homeX
+               ),
+               LINEAR_AXIS_LIST(
+                 doX = home_all || homeX, doY = home_all || homeY, doZ = home_all || homeZ,
+                 doI = home_all || homeI, doJ = home_all || homeJ, doK = home_all || homeK
+               );
 
+    #if HAS_Z_AXIS
+      UNUSED(needZ); UNUSED(homeZZ);
+    #else
+      constexpr bool doZ = false;
     #endif
 
+    TERN_(HOME_Z_FIRST, if (doZ) homeaxis(Z_AXIS));
+
     const float z_homing_height = parser.seenval('R') ? parser.value_linear_units() : Z_HOMING_HEIGHT;
 
-    if (z_homing_height && (doX || doY || TERN0(Z_SAFE_HOMING, doZ))) {
+    if (z_homing_height && (0 LINEAR_AXIS_GANG(|| doX, || doY, || TERN0(Z_SAFE_HOMING, doZ), || doI, || doJ, || doK))) {
       // Raise Z before homing any other axes and z is not already high enough (never lower z)
       if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("Raise Z (before homing) by ", z_homing_height);
       do_z_clearance(z_homing_height);
       TERN_(BLTOUCH, bltouch.init());
     }
 
-    #if ENABLED(QUICK_HOME)
-
-      if (doX && doY) quick_home_xy();
-
-    #endif
+    TERN_(QUICK_HOME, if (doX && doY) quick_home_xy());
 
     // Home Y (before X)
     if (ENABLED(HOME_Y_BEFORE_X) && (doY || TERN0(CODEPENDENT_XY_HOMING, doX)))
@@ -386,7 +399,7 @@ void GcodeSuite::G28() {
     TERN_(IMPROVE_HOMING_RELIABILITY, end_slow_homing(slow_homing));
 
     // Home Z last if homing towards the bed
-    #if DISABLED(HOME_Z_FIRST)
+    #if HAS_Z_AXIS && DISABLED(HOME_Z_FIRST)
       if (doZ) {
         #if EITHER(Z_MULTI_ENDSTOPS, Z_STEPPER_AUTO_ALIGN)
           stepper.set_all_z_lock(false);
@@ -398,6 +411,16 @@ void GcodeSuite::G28() {
       }
     #endif
 
+    #if LINEAR_AXES >= 4
+      if (doI) homeaxis(I_AXIS);
+    #endif
+    #if LINEAR_AXES >= 5
+      if (doJ) homeaxis(J_AXIS);
+    #endif
+    #if LINEAR_AXES >= 6
+      if (doK) homeaxis(K_AXIS);
+    #endif
+
     sync_plan_position();
 
   #endif
@@ -469,7 +492,16 @@ void GcodeSuite::G28() {
     #if HAS_CURRENT_HOME(Y2)
       stepperY2.rms_current(tmc_save_current_Y2);
     #endif
-  #endif
+    #if HAS_CURRENT_HOME(I)
+      stepperI.rms_current(tmc_save_current_I);
+    #endif
+    #if HAS_CURRENT_HOME(J)
+      stepperJ.rms_current(tmc_save_current_J);
+    #endif
+    #if HAS_CURRENT_HOME(K)
+      stepperK.rms_current(tmc_save_current_K);
+    #endif
+  #endif // HAS_HOMING_CURRENT
 
   ui.refresh();
 
@@ -487,11 +519,13 @@ void GcodeSuite::G28() {
     // Set L6470 absolute position registers to counts
     // constexpr *might* move this to PROGMEM.
     // If not, this will need a PROGMEM directive and an accessor.
+    #define _EN_ITEM(N) , E_AXIS
     static constexpr AxisEnum L64XX_axis_xref[MAX_L64XX] = {
-      X_AXIS, Y_AXIS, Z_AXIS,
-      X_AXIS, Y_AXIS, Z_AXIS, Z_AXIS,
-      E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS, E_AXIS
+      LINEAR_AXIS_LIST(X_AXIS, Y_AXIS, Z_AXIS, I_AXIS, J_AXIS, K_AXIS),
+      X_AXIS, Y_AXIS, Z_AXIS, Z_AXIS, Z_AXIS
+      REPEAT(E_STEPPERS, _EN_ITEM)
     };
+    #undef _EN_ITEM
     for (uint8_t j = 1; j <= L64XX::chain[0]; j++) {
       const uint8_t cv = L64XX::chain[j];
       L64xxManager.set_param((L64XX_axis_t)cv, L6470_ABS_POS, stepper.position(L64XX_axis_xref[cv]));

Marlin/src/gcode/calibrate/G34_M422.cpp

@@ -48,6 +48,13 @@
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../../core/debug_out.h"
 
+#if NUM_Z_STEPPER_DRIVERS >= 3
+  #define TRIPLE_Z 1
+  #if NUM_Z_STEPPER_DRIVERS >= 4
+    #define QUAD_Z 1
+  #endif
+#endif
+
 /**
  * G34: Z-Stepper automatic alignment
  *
@@ -82,9 +89,9 @@ void GcodeSuite::G34() {
     switch (parser.intval('Z')) {
       case 1: stepper.set_z1_lock(state); break;
       case 2: stepper.set_z2_lock(state); break;
-      #if NUM_Z_STEPPER_DRIVERS >= 3
+      #if TRIPLE_Z
         case 3: stepper.set_z3_lock(state); break;
-        #if NUM_Z_STEPPER_DRIVERS >= 4
+        #if QUAD_Z
           case 4: stepper.set_z4_lock(state); break;
         #endif
       #endif
@@ -99,13 +106,6 @@ void GcodeSuite::G34() {
   #if ENABLED(Z_STEPPER_AUTO_ALIGN)
     do { // break out on error
 
-      #if NUM_Z_STEPPER_DRIVERS == 4
-        SERIAL_ECHOLNPGM("Alignment for 4 steppers is Experimental!");
-      #elif NUM_Z_STEPPER_DRIVERS > 4
-        SERIAL_ECHOLNPGM("Alignment not supported for over 4 steppers");
-        break;
-      #endif
-
       const int8_t z_auto_align_iterations = parser.intval('I', Z_STEPPER_ALIGN_ITERATIONS);
       if (!WITHIN(z_auto_align_iterations, 1, 30)) {
         SERIAL_ECHOLNPGM("?(I)teration out of bounds (1-30).");
@@ -157,16 +157,14 @@ void GcodeSuite::G34() {
         const xy_pos_t diff = z_stepper_align.xy[i] - z_stepper_align.xy[j];
         return HYPOT2(diff.x, diff.y);
       };
-      float z_probe = Z_BASIC_CLEARANCE + (G34_MAX_GRADE) * 0.01f * SQRT(
-        #if NUM_Z_STEPPER_DRIVERS == 3
-          _MAX(magnitude2(0, 1), magnitude2(1, 2), magnitude2(2, 0))
-        #elif NUM_Z_STEPPER_DRIVERS == 4
-          _MAX(magnitude2(0, 1), magnitude2(1, 2), magnitude2(2, 3),
-                magnitude2(3, 0), magnitude2(0, 2), magnitude2(1, 3))
-        #else
-          magnitude2(0, 1)
+      float z_probe = Z_BASIC_CLEARANCE + (G34_MAX_GRADE) * 0.01f * SQRT(_MAX(0, magnitude2(0, 1)
+        #if TRIPLE_Z
+          , magnitude2(2, 1), magnitude2(2, 0)
+          #if QUAD_Z
+            , magnitude2(3, 2), magnitude2(3, 1), magnitude2(3, 0)
+          #endif
         #endif
-      );
+      ));
 
       // Home before the alignment procedure
       if (!all_axes_trusted()) home_all_axes();
@@ -178,7 +176,7 @@ void GcodeSuite::G34() {
       // This hack is un-done at the end of G34 - either by re-homing, or by using the probed heights of the last iteration.
 
       #if DISABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-        float last_z_align_move[NUM_Z_STEPPER_DRIVERS] = ARRAY_N(NUM_Z_STEPPER_DRIVERS, 10000.0f, 10000.0f, 10000.0f, 10000.0f);
+        float last_z_align_move[NUM_Z_STEPPER_DRIVERS] = ARRAY_N_1(NUM_Z_STEPPER_DRIVERS, 10000.0f);
       #else
         float last_z_align_level_indicator = 10000.0f;
       #endif
@@ -280,39 +278,52 @@ void GcodeSuite::G34() {
             z_measured_min = _MIN(z_measured_min, z_measured[i]);
           }
 
-          SERIAL_ECHOLNPAIR("CALCULATED STEPPER POSITIONS: Z1=", z_measured[0], " Z2=", z_measured[1], " Z3=", z_measured[2]);
+          SERIAL_ECHOLNPAIR(
+            LIST_N(DOUBLE(NUM_Z_STEPPER_DRIVERS),
+              "Calculated Z1=", z_measured[0],
+                        " Z2=", z_measured[1],
+                        " Z3=", z_measured[2],
+                        " Z4=", z_measured[3]
+            )
+          );
         #endif
 
         SERIAL_ECHOLNPAIR("\n"
-          "DIFFERENCE Z1-Z2=", ABS(z_measured[0] - z_measured[1])
-          #if NUM_Z_STEPPER_DRIVERS == 3
-            , " Z2-Z3=", ABS(z_measured[1] - z_measured[2])
+          "Z2-Z1=", ABS(z_measured[1] - z_measured[0])
+          #if TRIPLE_Z
+            , " Z3-Z2=", ABS(z_measured[2] - z_measured[1])
             , " Z3-Z1=", ABS(z_measured[2] - z_measured[0])
+            #if QUAD_Z
+              , " Z4-Z3=", ABS(z_measured[3] - z_measured[2])
+              , " Z4-Z2=", ABS(z_measured[3] - z_measured[1])
+              , " Z4-Z1=", ABS(z_measured[3] - z_measured[0])
+            #endif
           #endif
         );
+
         #if HAS_STATUS_MESSAGE
           char fstr1[10];
-          #if NUM_Z_STEPPER_DRIVERS == 2
-            char msg[6 + (6 + 5) * 1 + 1];
-          #else
-            char msg[6 + (6 + 5) * 3 + 1], fstr2[10], fstr3[10];
-          #endif
-          sprintf_P(msg,
-            PSTR("Diffs Z1-Z2=%s"
-              #if NUM_Z_STEPPER_DRIVERS == 3
-                " Z2-Z3=%s"
-                " Z3-Z1=%s"
+          char msg[6 + (6 + 5) * NUM_Z_STEPPER_DRIVERS + 1]
+            #if TRIPLE_Z
+              , fstr2[10], fstr3[10]
+              #if QUAD_Z
+                , fstr4[10], fstr5[10], fstr6[10]
               #endif
-            ), dtostrf(ABS(z_measured[0] - z_measured[1]), 1, 3, fstr1)
-            #if NUM_Z_STEPPER_DRIVERS == 3
-              , dtostrf(ABS(z_measured[1] - z_measured[2]), 1, 3, fstr2)
-              , dtostrf(ABS(z_measured[2] - z_measured[0]), 1, 3, fstr3)
             #endif
+          ;
+          sprintf_P(msg,
+            PSTR("1:2=%s" TERN_(TRIPLE_Z, " 3-2=%s 3-1=%s") TERN_(QUAD_Z, " 4-3=%s 4-2=%s 4-1=%s")),
+            dtostrf(ABS(z_measured[1] - z_measured[0]), 1, 3, fstr1)
+            OPTARG(TRIPLE_Z, dtostrf(ABS(z_measured[2] - z_measured[1]), 1, 3, fstr2))
+            OPTARG(TRIPLE_Z, dtostrf(ABS(z_measured[2] - z_measured[0]), 1, 3, fstr3))
+            OPTARG(QUAD_Z,   dtostrf(ABS(z_measured[3] - z_measured[2]), 1, 3, fstr4))
+            OPTARG(QUAD_Z,   dtostrf(ABS(z_measured[3] - z_measured[1]), 1, 3, fstr5))
+            OPTARG(QUAD_Z,   dtostrf(ABS(z_measured[3] - z_measured[0]), 1, 3, fstr6))
           );
           ui.set_status(msg);
         #endif
 
-        auto decreasing_accuracy = [](const_float_t v1, const_float_t v2){
+        auto decreasing_accuracy = [](const_float_t v1, const_float_t v2) {
           if (v1 < v2 * 0.7f) {
             SERIAL_ECHOLNPGM("Decreasing Accuracy Detected.");
             LCD_MESSAGEPGM(MSG_DECREASING_ACCURACY);
@@ -437,7 +448,7 @@ void GcodeSuite::G34() {
       #endif
 
     }while(0);
-  #endif
+  #endif // Z_STEPPER_AUTO_ALIGN
 }
 
 #endif // Z_MULTI_ENDSTOPS || Z_STEPPER_AUTO_ALIGN

Marlin/src/gcode/calibrate/G425.cpp

@@ -73,11 +73,23 @@
 #if BOTH(CALIBRATION_MEASURE_LEFT, CALIBRATION_MEASURE_RIGHT)
   #define HAS_X_CENTER 1
 #endif
-#if BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
+#if HAS_Y_AXIS && BOTH(CALIBRATION_MEASURE_FRONT, CALIBRATION_MEASURE_BACK)
   #define HAS_Y_CENTER 1
 #endif
+#if LINEAR_AXES >= 4 && BOTH(CALIBRATION_MEASURE_IMIN, CALIBRATION_MEASURE_IMAX)
+  #define HAS_I_CENTER 1
+#endif
+#if LINEAR_AXES >= 5 && BOTH(CALIBRATION_MEASURE_JMIN, CALIBRATION_MEASURE_JMAX)
+  #define HAS_J_CENTER 1
+#endif
+#if LINEAR_AXES >= 6 && BOTH(CALIBRATION_MEASURE_KMIN, CALIBRATION_MEASURE_KMAX)
+  #define HAS_K_CENTER 1
+#endif
 
-enum side_t : uint8_t { TOP, RIGHT, FRONT, LEFT, BACK, NUM_SIDES };
+enum side_t : uint8_t {
+  TOP, RIGHT, FRONT, LEFT, BACK, NUM_SIDES,
+  LIST_N(DOUBLE(SUB3(LINEAR_AXES)), IMINIMUM, IMAXIMUM, JMINIMUM, JMAXIMUM, KMINIMUM, KMAXIMUM)
+};
 
 static constexpr xyz_pos_t true_center CALIBRATION_OBJECT_CENTER;
 static constexpr xyz_float_t dimensions CALIBRATION_OBJECT_DIMENSIONS;
@@ -105,7 +117,7 @@ struct measurements_t {
 #endif
 
 inline void calibration_move() {
-  do_blocking_move_to(current_position, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
+  do_blocking_move_to((xyz_pos_t)current_position, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
 }
 
 /**
@@ -174,7 +186,7 @@ float measuring_movement(const AxisEnum axis, const int dir, const bool stop_sta
   destination = current_position;
   for (float travel = 0; travel < limit; travel += step) {
     destination[axis] += dir * step;
-    do_blocking_move_to(destination, mms);
+    do_blocking_move_to((xyz_pos_t)destination, mms);
     planner.synchronize();
     if (read_calibration_pin() == stop_state) break;
   }
@@ -209,7 +221,7 @@ inline float measure(const AxisEnum axis, const int dir, const bool stop_state,
   // Move back to the starting position
   destination = current_position;
   destination[axis] = start_pos;
-  do_blocking_move_to(destination, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
+  do_blocking_move_to((xyz_pos_t)destination, MMM_TO_MMS(CALIBRATION_FEEDRATE_TRAVEL));
   return measured_pos;
 }
 
@@ -230,7 +242,15 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
   park_above_object(m, uncertainty);
 
   switch (side) {
-    #if AXIS_CAN_CALIBRATE(Z)
+    #if AXIS_CAN_CALIBRATE(X)
+      case RIGHT: dir = -1;
+      case LEFT:  axis = X_AXIS; break;
+    #endif
+    #if LINEAR_AXES >= 2 && AXIS_CAN_CALIBRATE(Y)
+      case BACK:  dir = -1;
+      case FRONT: axis = Y_AXIS; break;
+    #endif
+    #if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
       case TOP: {
         const float measurement = measure(Z_AXIS, -1, true, &m.backlash[TOP], uncertainty);
         m.obj_center.z = measurement - dimensions.z / 2;
@@ -238,13 +258,17 @@ inline void probe_side(measurements_t &m, const float uncertainty, const side_t
         return;
       }
     #endif
-    #if AXIS_CAN_CALIBRATE(X)
-      case RIGHT: dir = -1;
-      case LEFT:  axis = X_AXIS; break;
+    #if LINEAR_AXES >= 4 && AXIS_CAN_CALIBRATE(I)
+      case IMINIMUM: dir = -1;
+      case IMAXIMUM: axis = I_AXIS; break;
     #endif
-    #if AXIS_CAN_CALIBRATE(Y)
-      case BACK:  dir = -1;
-      case FRONT: axis = Y_AXIS; break;
+    #if LINEAR_AXES >= 5 && AXIS_CAN_CALIBRATE(J)
+      case JMINIMUM: dir = -1;
+      case JMAXIMUM: axis = J_AXIS; break;
+    #endif
+    #if LINEAR_AXES >= 6 && AXIS_CAN_CALIBRATE(K)
+      case KMINIMUM: dir = -1;
+      case KMAXIMUM: axis = K_AXIS; break;
     #endif
     default: return;
   }
@@ -289,14 +313,23 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     probe_side(m, uncertainty, TOP);
   #endif
 
-  TERN_(CALIBRATION_MEASURE_RIGHT, probe_side(m, uncertainty, RIGHT, probe_top_at_edge));
-  TERN_(CALIBRATION_MEASURE_FRONT, probe_side(m, uncertainty, FRONT, probe_top_at_edge));
-  TERN_(CALIBRATION_MEASURE_LEFT,  probe_side(m, uncertainty, LEFT,  probe_top_at_edge));
-  TERN_(CALIBRATION_MEASURE_BACK,  probe_side(m, uncertainty, BACK,  probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_RIGHT, probe_side(m, uncertainty, RIGHT,    probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_FRONT, probe_side(m, uncertainty, FRONT,    probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_LEFT,  probe_side(m, uncertainty, LEFT,     probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_BACK,  probe_side(m, uncertainty, BACK,     probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_IMIN,  probe_side(m, uncertainty, IMINIMUM, probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_IMAX,  probe_side(m, uncertainty, IMAXIMUM, probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_JMIN,  probe_side(m, uncertainty, JMINIMUM, probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_JMAX,  probe_side(m, uncertainty, JMAXIMUM, probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_KMIN,  probe_side(m, uncertainty, KMINIMUM, probe_top_at_edge));
+  TERN_(CALIBRATION_MEASURE_KMAX,  probe_side(m, uncertainty, KMAXIMUM, probe_top_at_edge));
 
   // Compute the measured center of the calibration object.
-  TERN_(HAS_X_CENTER, m.obj_center.x = (m.obj_side[LEFT] + m.obj_side[RIGHT]) / 2);
-  TERN_(HAS_Y_CENTER, m.obj_center.y = (m.obj_side[FRONT] + m.obj_side[BACK]) / 2);
+  TERN_(HAS_X_CENTER, m.obj_center.x = (m.obj_side[LEFT]     + m.obj_side[RIGHT])    / 2);
+  TERN_(HAS_Y_CENTER, m.obj_center.y = (m.obj_side[FRONT]    + m.obj_side[BACK])     / 2);
+  TERN_(HAS_I_CENTER, m.obj_center.i = (m.obj_side[IMINIMUM] + m.obj_side[IMAXIMUM]) / 2);
+  TERN_(HAS_J_CENTER, m.obj_center.j = (m.obj_side[JMINIMUM] + m.obj_side[JMAXIMUM]) / 2);
+  TERN_(HAS_K_CENTER, m.obj_center.k = (m.obj_side[KMINIMUM] + m.obj_side[KMAXIMUM]) / 2);
 
   // Compute the outside diameter of the nozzle at the height
   // at which it makes contact with the calibration object
@@ -307,15 +340,20 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
 
   // The difference between the known and the measured location
   // of the calibration object is the positional error
-  m.pos_error.x = TERN0(HAS_X_CENTER, true_center.x - m.obj_center.x);
-  m.pos_error.y = TERN0(HAS_Y_CENTER, true_center.y - m.obj_center.y);
-  m.pos_error.z = true_center.z - m.obj_center.z;
+  LINEAR_AXIS_CODE(
+    m.pos_error.x = TERN0(HAS_X_CENTER, true_center.x - m.obj_center.x),
+    m.pos_error.y = TERN0(HAS_Y_CENTER, true_center.y - m.obj_center.y),
+    m.pos_error.z = true_center.z - m.obj_center.z,
+    m.pos_error.i = TERN0(HAS_I_CENTER, true_center.i - m.obj_center.i),
+    m.pos_error.j = TERN0(HAS_J_CENTER, true_center.j - m.obj_center.j),
+    m.pos_error.k = TERN0(HAS_K_CENTER, true_center.k - m.obj_center.k)
+  );
 }
 
 #if ENABLED(CALIBRATION_REPORTING)
   inline void report_measured_faces(const measurements_t &m) {
     SERIAL_ECHOLNPGM("Sides:");
-    #if AXIS_CAN_CALIBRATE(Z)
+    #if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
       SERIAL_ECHOLNPAIR("  Top: ", m.obj_side[TOP]);
     #endif
     #if ENABLED(CALIBRATION_MEASURE_LEFT)
@@ -324,11 +362,37 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     #if ENABLED(CALIBRATION_MEASURE_RIGHT)
       SERIAL_ECHOLNPAIR("  Right: ", m.obj_side[RIGHT]);
     #endif
-    #if ENABLED(CALIBRATION_MEASURE_FRONT)
-      SERIAL_ECHOLNPAIR("  Front: ", m.obj_side[FRONT]);
+    #if HAS_Y_AXIS
+      #if ENABLED(CALIBRATION_MEASURE_FRONT)
+        SERIAL_ECHOLNPAIR("  Front: ", m.obj_side[FRONT]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_BACK)
+        SERIAL_ECHOLNPAIR("  Back: ", m.obj_side[BACK]);
+      #endif
     #endif
-    #if ENABLED(CALIBRATION_MEASURE_BACK)
-      SERIAL_ECHOLNPAIR("  Back: ", m.obj_side[BACK]);
+    #if LINEAR_AXES >= 4
+      #if ENABLED(CALIBRATION_MEASURE_IMIN)
+        SERIAL_ECHOLNPAIR("  " STR_I_MIN ": ", m.obj_side[IMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_IMAX)
+        SERIAL_ECHOLNPAIR("  " STR_I_MAX ": ", m.obj_side[IMAXIMUM]);
+      #endif
+    #endif
+    #if LINEAR_AXES >= 5
+      #if ENABLED(CALIBRATION_MEASURE_JMIN)
+        SERIAL_ECHOLNPAIR("  " STR_J_MIN ": ", m.obj_side[JMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_JMAX)
+        SERIAL_ECHOLNPAIR("  " STR_J_MAX ": ", m.obj_side[JMAXIMUM]);
+      #endif
+    #endif
+    #if LINEAR_AXES >= 6
+      #if ENABLED(CALIBRATION_MEASURE_KMIN)
+        SERIAL_ECHOLNPAIR("  " STR_K_MIN ": ", m.obj_side[KMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_KMAX)
+        SERIAL_ECHOLNPAIR("  " STR_K_MAX ": ", m.obj_side[KMAXIMUM]);
+      #endif
     #endif
     SERIAL_EOL();
   }
@@ -342,6 +406,15 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
       SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.obj_center.y);
     #endif
     SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.obj_center.z);
+    #if HAS_I_CENTER
+      SERIAL_ECHOLNPAIR_P(SP_I_STR, m.obj_center.i);
+    #endif
+    #if HAS_J_CENTER
+      SERIAL_ECHOLNPAIR_P(SP_J_STR, m.obj_center.j);
+    #endif
+    #if HAS_K_CENTER
+      SERIAL_ECHOLNPAIR_P(SP_K_STR, m.obj_center.k);
+    #endif
     SERIAL_EOL();
   }
 
@@ -355,7 +428,7 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
         SERIAL_ECHOLNPAIR("  Right: ", m.backlash[RIGHT]);
       #endif
     #endif
-    #if AXIS_CAN_CALIBRATE(Y)
+    #if HAS_Y_AXIS && AXIS_CAN_CALIBRATE(Y)
       #if ENABLED(CALIBRATION_MEASURE_FRONT)
         SERIAL_ECHOLNPAIR("  Front: ", m.backlash[FRONT]);
       #endif
@@ -363,9 +436,33 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
         SERIAL_ECHOLNPAIR("  Back: ", m.backlash[BACK]);
       #endif
     #endif
-    #if AXIS_CAN_CALIBRATE(Z)
+    #if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
       SERIAL_ECHOLNPAIR("  Top: ", m.backlash[TOP]);
     #endif
+    #if LINEAR_AXES >= 4 AXIS_CAN_CALIBRATE(I)
+      #if ENABLED(CALIBRATION_MEASURE_IMIN)
+        SERIAL_ECHOLNPAIR("  " STR_I_MIN ": ", m.backlash[IMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_IMAX)
+        SERIAL_ECHOLNPAIR("  " STR_I_MAX ": ", m.backlash[IMAXIMUM]);
+      #endif
+    #endif
+    #if LINEAR_AXES >= 5 AXIS_CAN_CALIBRATE(J)
+      #if ENABLED(CALIBRATION_MEASURE_JMIN)
+        SERIAL_ECHOLNPAIR("  " STR_J_MIN ": ", m.backlash[JMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_JMAX)
+        SERIAL_ECHOLNPAIR("  " STR_J_MAX ": ", m.backlash[JMAXIMUM]);
+      #endif
+    #endif
+    #if LINEAR_AXES >= 6 AXIS_CAN_CALIBRATE(K)
+      #if ENABLED(CALIBRATION_MEASURE_KMIN)
+        SERIAL_ECHOLNPAIR("  " STR_K_MIN ": ", m.backlash[KMINIMUM]);
+      #endif
+      #if ENABLED(CALIBRATION_MEASURE_KMAX)
+        SERIAL_ECHOLNPAIR("  " STR_K_MAX ": ", m.backlash[KMAXIMUM]);
+      #endif
+    #endif
     SERIAL_EOL();
   }
 
@@ -373,29 +470,37 @@ inline void probe_sides(measurements_t &m, const float uncertainty) {
     SERIAL_CHAR('T');
     SERIAL_ECHO(active_extruder);
     SERIAL_ECHOLNPGM(" Positional Error:");
-    #if HAS_X_CENTER
+    #if HAS_X_CENTER && AXIS_CAN_CALIBRATE(X)
       SERIAL_ECHOLNPAIR_P(SP_X_STR, m.pos_error.x);
     #endif
-    #if HAS_Y_CENTER
+    #if HAS_Y_CENTER && AXIS_CAN_CALIBRATE(Y)
       SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.pos_error.y);
     #endif
-    if (AXIS_CAN_CALIBRATE(Z)) SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
+    #if HAS_Z_AXIS && AXIS_CAN_CALIBRATE(Z)
+      SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
+    #endif
+    #if HAS_I_CENTER && AXIS_CAN_CALIBRATE(I)
+      SERIAL_ECHOLNPAIR_P(SP_I_STR, m.pos_error.i);
+    #endif
+    #if HAS_J_CENTER && AXIS_CAN_CALIBRATE(J)
+      SERIAL_ECHOLNPAIR_P(SP_J_STR, m.pos_error.j);
+    #endif
+    #if HAS_K_CENTER && AXIS_CAN_CALIBRATE(K)
+      SERIAL_ECHOLNPAIR_P(SP_Z_STR, m.pos_error.z);
+    #endif
     SERIAL_EOL();
   }
 
   inline void report_measured_nozzle_dimensions(const measurements_t &m) {
     SERIAL_ECHOLNPGM("Nozzle Tip Outer Dimensions:");
-    #if HAS_X_CENTER || HAS_Y_CENTER
-      #if HAS_X_CENTER
-        SERIAL_ECHOLNPAIR_P(SP_X_STR, m.nozzle_outer_dimension.x);
-      #endif
-      #if HAS_Y_CENTER
-        SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.nozzle_outer_dimension.y);
-      #endif
-    #else
-      UNUSED(m);
+    #if HAS_X_CENTER
+      SERIAL_ECHOLNPAIR_P(SP_X_STR, m.nozzle_outer_dimension.x);
+    #endif
+    #if HAS_Y_CENTER
+      SERIAL_ECHOLNPAIR_P(SP_Y_STR, m.nozzle_outer_dimension.y);
     #endif
     SERIAL_EOL();
+    UNUSED(m);
   }
 
   #if HAS_HOTEND_OFFSET
@@ -444,8 +549,33 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
         backlash.distance_mm.y = m.backlash[BACK];
       #endif
 
-      if (AXIS_CAN_CALIBRATE(Z)) backlash.distance_mm.z = m.backlash[TOP];
-    #endif
+      TERN_(HAS_Z_AXIS, if (AXIS_CAN_CALIBRATE(Z)) backlash.distance_mm.z = m.backlash[TOP]);
+
+      #if HAS_I_CENTER
+        backlash.distance_mm.i = (m.backlash[IMINIMUM] + m.backlash[IMAXIMUM]) / 2;
+      #elif ENABLED(CALIBRATION_MEASURE_IMIN)
+        backlash.distance_mm.i = m.backlash[IMINIMUM];
+      #elif ENABLED(CALIBRATION_MEASURE_IMAX)
+        backlash.distance_mm.i = m.backlash[IMAXIMUM];
+      #endif
+
+      #if HAS_J_CENTER
+        backlash.distance_mm.j = (m.backlash[JMINIMUM] + m.backlash[JMAXIMUM]) / 2;
+      #elif ENABLED(CALIBRATION_MEASURE_JMIN)
+        backlash.distance_mm.j = m.backlash[JMINIMUM];
+      #elif ENABLED(CALIBRATION_MEASURE_JMAX)
+        backlash.distance_mm.j = m.backlash[JMAXIMUM];
+      #endif
+
+      #if HAS_K_CENTER
+        backlash.distance_mm.k = (m.backlash[KMINIMUM] + m.backlash[KMAXIMUM]) / 2;
+      #elif ENABLED(CALIBRATION_MEASURE_KMIN)
+        backlash.distance_mm.k = m.backlash[KMINIMUM];
+      #elif ENABLED(CALIBRATION_MEASURE_KMAX)
+        backlash.distance_mm.k = m.backlash[KMAXIMUM];
+      #endif
+
+    #endif // BACKLASH_GCODE
   }
 
   #if ENABLED(BACKLASH_GCODE)
@@ -455,7 +585,10 @@ inline void calibrate_backlash(measurements_t &m, const float uncertainty) {
       // New scope for TEMPORARY_BACKLASH_CORRECTION
       TEMPORARY_BACKLASH_CORRECTION(all_on);
       TEMPORARY_BACKLASH_SMOOTHING(0.0f);
-      const xyz_float_t move = { AXIS_CAN_CALIBRATE(X) * 3, AXIS_CAN_CALIBRATE(Y) * 3, AXIS_CAN_CALIBRATE(Z) * 3 };
+      const xyz_float_t move = LINEAR_AXIS_ARRAY(
+        AXIS_CAN_CALIBRATE(X) * 3, AXIS_CAN_CALIBRATE(Y) * 3, AXIS_CAN_CALIBRATE(Z) * 3,
+        AXIS_CAN_CALIBRATE(I) * 3, AXIS_CAN_CALIBRATE(J) * 3, AXIS_CAN_CALIBRATE(K) * 3
+      );
       current_position += move; calibration_move();
       current_position -= move; calibration_move();
     }
@@ -483,11 +616,7 @@ inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const
   TEMPORARY_BACKLASH_CORRECTION(all_on);
   TEMPORARY_BACKLASH_SMOOTHING(0.0f);
 
-  #if HAS_MULTI_HOTEND
-    set_nozzle(m, extruder);
-  #else
-    UNUSED(extruder);
-  #endif
+  TERN(HAS_MULTI_HOTEND, set_nozzle(m, extruder), UNUSED(extruder));
 
   probe_sides(m, uncertainty);
 
@@ -506,6 +635,10 @@ inline void calibrate_toolhead(measurements_t &m, const float uncertainty, const
   if (ENABLED(HAS_Y_CENTER) && AXIS_CAN_CALIBRATE(Y)) update_measurements(m, Y_AXIS);
                            if (AXIS_CAN_CALIBRATE(Z)) update_measurements(m, Z_AXIS);
 
+  TERN_(HAS_I_CENTER, update_measurements(m, I_AXIS));
+  TERN_(HAS_J_CENTER, update_measurements(m, J_AXIS));
+  TERN_(HAS_K_CENTER, update_measurements(m, K_AXIS));
+
   sync_plan_position();
 }
 

Marlin/src/gcode/calibrate/M425.cpp

@@ -48,10 +48,15 @@ void GcodeSuite::M425() {
 
   auto axis_can_calibrate = [](const uint8_t a) {
     switch (a) {
-      default:
-      case X_AXIS: return AXIS_CAN_CALIBRATE(X);
-      case Y_AXIS: return AXIS_CAN_CALIBRATE(Y);
-      case Z_AXIS: return AXIS_CAN_CALIBRATE(Z);
+      default: return false;
+      LINEAR_AXIS_CODE(
+        case X_AXIS: return AXIS_CAN_CALIBRATE(X),
+        case Y_AXIS: return AXIS_CAN_CALIBRATE(Y),
+        case Z_AXIS: return AXIS_CAN_CALIBRATE(Z),
+        case I_AXIS: return AXIS_CAN_CALIBRATE(I),
+        case J_AXIS: return AXIS_CAN_CALIBRATE(J),
+        case K_AXIS: return AXIS_CAN_CALIBRATE(K),
+      );
     }
   };
 

Marlin/src/gcode/config/M200-M205.cpp

@@ -88,7 +88,7 @@ void GcodeSuite::M201() {
 
   LOOP_LOGICAL_AXES(i) {
     if (parser.seenval(axis_codes[i])) {
-      const uint8_t a = (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i);
+      const uint8_t a = TERN(HAS_EXTRUDERS, (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i), i);
       planner.set_max_acceleration(a, parser.value_axis_units((AxisEnum)a));
     }
   }
@@ -106,7 +106,7 @@ void GcodeSuite::M203() {
 
   LOOP_LOGICAL_AXES(i)
     if (parser.seenval(axis_codes[i])) {
-      const uint8_t a = (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i);
+      const uint8_t a = TERN(HAS_EXTRUDERS, (i == E_AXIS ? uint8_t(E_AXIS_N(target_extruder)) : i), i);
       planner.set_max_feedrate(a, parser.value_axis_units((AxisEnum)a));
     }
 }
@@ -154,6 +154,9 @@ void GcodeSuite::M205() {
   if (parser.seenval('S')) planner.settings.min_feedrate_mm_s = parser.value_linear_units();
   if (parser.seenval('T')) planner.settings.min_travel_feedrate_mm_s = parser.value_linear_units();
   #if HAS_JUNCTION_DEVIATION
+    #if HAS_CLASSIC_JERK && (AXIS4_NAME == 'J' || AXIS5_NAME == 'J' || AXIS6_NAME == 'J')
+      #error "Can't set_max_jerk for 'J' axis because 'J' is used for Junction Deviation."
+    #endif
     if (parser.seenval('J')) {
       const float junc_dev = parser.value_linear_units();
       if (WITHIN(junc_dev, 0.01f, 0.3f)) {
@@ -165,17 +168,19 @@ void GcodeSuite::M205() {
     }
   #endif
   #if HAS_CLASSIC_JERK
-    if (parser.seenval('X')) planner.set_max_jerk(X_AXIS, parser.value_linear_units());
-    if (parser.seenval('Y')) planner.set_max_jerk(Y_AXIS, parser.value_linear_units());
-    if (parser.seenval('Z')) {
-      planner.set_max_jerk(Z_AXIS, parser.value_linear_units());
-      #if HAS_MESH && DISABLED(LIMITED_JERK_EDITING)
-        if (planner.max_jerk.z <= 0.1f)
-          SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
-      #endif
-    }
-    #if HAS_CLASSIC_E_JERK
-      if (parser.seenval('E')) planner.set_max_jerk(E_AXIS, parser.value_linear_units());
+    bool seenZ = false;
+    LOGICAL_AXIS_CODE(
+      if (parser.seenval('E')) planner.set_max_jerk(E_AXIS, parser.value_linear_units()),
+      if (parser.seenval('X')) planner.set_max_jerk(X_AXIS, parser.value_linear_units()),
+      if (parser.seenval('Y')) planner.set_max_jerk(Y_AXIS, parser.value_linear_units()),
+      if ((seenZ = parser.seenval('Z'))) planner.set_max_jerk(Z_AXIS, parser.value_linear_units()),
+      if (parser.seenval(AXIS4_NAME)) planner.set_max_jerk(I_AXIS, parser.value_linear_units()),
+      if (parser.seenval(AXIS5_NAME)) planner.set_max_jerk(J_AXIS, parser.value_linear_units()),
+      if (parser.seenval(AXIS6_NAME)) planner.set_max_jerk(K_AXIS, parser.value_linear_units())
+    );
+    #if HAS_MESH && DISABLED(LIMITED_JERK_EDITING)
+      if (seenZ && planner.max_jerk.z <= 0.1f)
+        SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
     #endif
-  #endif
+  #endif // HAS_CLASSIC_JERK
 }

Marlin/src/gcode/config/M92.cpp

@@ -25,10 +25,15 @@
 
 void report_M92(const bool echo=true, const int8_t e=-1) {
   if (echo) SERIAL_ECHO_START(); else SERIAL_CHAR(' ');
-  SERIAL_ECHOPAIR_P(PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
-                          SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
-                          SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]));
-  #if DISABLED(DISTINCT_E_FACTORS)
+  SERIAL_ECHOPAIR_P(LIST_N(DOUBLE(LINEAR_AXES),
+    PSTR(" M92 X"), LINEAR_UNIT(planner.settings.axis_steps_per_mm[X_AXIS]),
+    SP_Y_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Y_AXIS]),
+    SP_Z_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[Z_AXIS]),
+    SP_I_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[I_AXIS]),
+    SP_J_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[J_AXIS]),
+    SP_K_STR, LINEAR_UNIT(planner.settings.axis_steps_per_mm[K_AXIS]))
+  );
+  #if HAS_EXTRUDERS && DISABLED(DISTINCT_E_FACTORS)
     SERIAL_ECHOPAIR_P(SP_E_STR, VOLUMETRIC_UNIT(planner.settings.axis_steps_per_mm[E_AXIS]));
   #endif
   SERIAL_EOL();
@@ -64,25 +69,28 @@ void GcodeSuite::M92() {
   if (target_extruder < 0) return;
 
   // No arguments? Show M92 report.
-  if (!parser.seen("XYZE" TERN_(MAGIC_NUMBERS_GCODE, "HL")))
-    return report_M92(true, target_extruder);
+  if (!parser.seen(
+    LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR)
+    TERN_(MAGIC_NUMBERS_GCODE, "HL")
+  )) return report_M92(true, target_extruder);
 
   LOOP_LOGICAL_AXES(i) {
     if (parser.seenval(axis_codes[i])) {
-      if (i == E_AXIS) {
-        const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS_N(target_extruder)));
-        if (value < 20) {
-          float factor = planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] / value; // increase e constants if M92 E14 is given for netfab.
-          #if HAS_CLASSIC_JERK && HAS_CLASSIC_E_JERK
-            planner.max_jerk.e *= factor;
-          #endif
-          planner.settings.max_feedrate_mm_s[E_AXIS_N(target_extruder)] *= factor;
-          planner.max_acceleration_steps_per_s2[E_AXIS_N(target_extruder)] *= factor;
-        }
-        planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] = value;
-      }
-      else {
+      if (TERN1(HAS_EXTRUDERS, i != E_AXIS))
         planner.settings.axis_steps_per_mm[i] = parser.value_per_axis_units((AxisEnum)i);
+      else {
+        #if HAS_EXTRUDERS
+          const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS_N(target_extruder)));
+          if (value < 20) {
+            float factor = planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] / value; // increase e constants if M92 E14 is given for netfab.
+            #if HAS_CLASSIC_JERK && HAS_CLASSIC_E_JERK
+              planner.max_jerk.e *= factor;
+            #endif
+            planner.settings.max_feedrate_mm_s[E_AXIS_N(target_extruder)] *= factor;
+            planner.max_acceleration_steps_per_s2[E_AXIS_N(target_extruder)] *= factor;
+          }
+          planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] = value;
+        #endif
       }
     }
   }

Marlin/src/gcode/control/M17_M18_M84.cpp

@@ -33,11 +33,16 @@
  * M17: Enable stepper motors
  */
 void GcodeSuite::M17() {
-  if (parser.seen("XYZE")) {
-    if (parser.seen_test('X')) ENABLE_AXIS_X();
-    if (parser.seen_test('Y')) ENABLE_AXIS_Y();
-    if (parser.seen_test('Z')) ENABLE_AXIS_Z();
-    if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) enable_e_steppers();
+  if (parser.seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
+    LOGICAL_AXIS_CODE(
+      if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) enable_e_steppers(),
+      if (parser.seen_test('X'))        ENABLE_AXIS_X(),
+      if (parser.seen_test('Y'))        ENABLE_AXIS_Y(),
+      if (parser.seen_test('Z'))        ENABLE_AXIS_Z(),
+      if (parser.seen_test(AXIS4_NAME)) ENABLE_AXIS_I(),
+      if (parser.seen_test(AXIS5_NAME)) ENABLE_AXIS_J(),
+      if (parser.seen_test(AXIS6_NAME)) ENABLE_AXIS_K()
+    );
   }
   else {
     LCD_MESSAGEPGM(MSG_NO_MOVE);
@@ -54,12 +59,17 @@ void GcodeSuite::M18_M84() {
     stepper_inactive_time = parser.value_millis_from_seconds();
   }
   else {
-    if (parser.seen("XYZE")) {
+    if (parser.seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
       planner.synchronize();
-      if (parser.seen_test('X')) DISABLE_AXIS_X();
-      if (parser.seen_test('Y')) DISABLE_AXIS_Y();
-      if (parser.seen_test('Z')) DISABLE_AXIS_Z();
-      if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) disable_e_steppers();
+      LOGICAL_AXIS_CODE(
+        if (TERN0(HAS_E_STEPPER_ENABLE, parser.seen_test('E'))) disable_e_steppers(),
+        if (parser.seen_test('X'))        DISABLE_AXIS_X(),
+        if (parser.seen_test('Y'))        DISABLE_AXIS_Y(),
+        if (parser.seen_test('Z'))        DISABLE_AXIS_Z(),
+        if (parser.seen_test(AXIS4_NAME)) DISABLE_AXIS_I(),
+        if (parser.seen_test(AXIS5_NAME)) DISABLE_AXIS_J(),
+        if (parser.seen_test(AXIS6_NAME)) DISABLE_AXIS_K()
+      );
     }
     else
       planner.finish_and_disable();

Marlin/src/gcode/control/M605.cpp

@@ -70,26 +70,12 @@
       dual_x_carriage_mode = (DualXMode)parser.value_byte();
       idex_set_mirrored_mode(false);
 
-      if (dual_x_carriage_mode == DXC_MIRRORED_MODE) {
-        if (previous_mode != DXC_DUPLICATION_MODE) {
-          SERIAL_ECHOLNPGM("Printer must be in DXC_DUPLICATION_MODE prior to ");
-          SERIAL_ECHOLNPGM("specifying DXC_MIRRORED_MODE.");
-          dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
-          return;
-        }
-        idex_set_mirrored_mode(true);
-        float x_jog = current_position.x - .1;
-        for (uint8_t i = 2; --i;) {
-          planner.buffer_line(x_jog, current_position.y, current_position.z, current_position.e, feedrate_mm_s, 0);
-          x_jog += .1;
-        }
-        return;
-      }
-
       switch (dual_x_carriage_mode) {
+
         case DXC_FULL_CONTROL_MODE:
         case DXC_AUTO_PARK_MODE:
           break;
+
         case DXC_DUPLICATION_MODE:
           // Set the X offset, but no less than the safety gap
           if (parser.seen('X')) duplicate_extruder_x_offset = _MAX(parser.value_linear_units(), (X2_MIN_POS) - (X1_MIN_POS));
@@ -97,10 +83,29 @@
           // Always switch back to tool 0
           if (active_extruder != 0) tool_change(0);
           break;
+
+        case DXC_MIRRORED_MODE: {
+          if (previous_mode != DXC_DUPLICATION_MODE) {
+            SERIAL_ECHOLNPGM("Printer must be in DXC_DUPLICATION_MODE prior to ");
+            SERIAL_ECHOLNPGM("specifying DXC_MIRRORED_MODE.");
+            dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
+            return;
+          }
+          idex_set_mirrored_mode(true);
+
+          // Do a small 'jog' motion in the X axis
+          xyze_pos_t dest = current_position; dest.x -= 0.1f;
+          for (uint8_t i = 2; --i;) {
+            planner.buffer_line(dest, feedrate_mm_s, 0);
+            dest.x += 0.1f;
+          }
+        } return;
+
         default:
           dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
           break;
       }
+
       idex_set_parked(false);
       set_duplication_enabled(false);
 

Marlin/src/gcode/feature/L6470/M906.cpp

@@ -252,58 +252,67 @@ void GcodeSuite::M906() {
           if (index == 1) L6470_SET_KVAL_HOLD(X2);
         #endif
         break;
-      case Y_AXIS:
-        #if AXIS_IS_L64XX(Y)
-          if (index == 0) L6470_SET_KVAL_HOLD(Y);
-        #endif
-        #if AXIS_IS_L64XX(Y2)
-          if (index == 1) L6470_SET_KVAL_HOLD(Y2);
-        #endif
-        break;
-      case Z_AXIS:
-        #if AXIS_IS_L64XX(Z)
-          if (index == 0) L6470_SET_KVAL_HOLD(Z);
-        #endif
-        #if AXIS_IS_L64XX(Z2)
-          if (index == 1) L6470_SET_KVAL_HOLD(Z2);
-        #endif
-        #if AXIS_IS_L64XX(Z3)
-          if (index == 2) L6470_SET_KVAL_HOLD(Z3);
-        #endif
-        #if AXIS_DRIVER_TYPE_Z4(L6470)
-          if (index == 3) L6470_SET_KVAL_HOLD(Z4);
-        #endif
-        break;
-      case E_AXIS: {
-        const int8_t target_extruder = get_target_extruder_from_command();
-        if (target_extruder < 0) return;
-        switch (target_extruder) {
-          #if AXIS_IS_L64XX(E0)
-            case 0: L6470_SET_KVAL_HOLD(E0); break;
+
+      #if HAS_Y_AXIS
+        case Y_AXIS:
+          #if AXIS_IS_L64XX(Y)
+            if (index == 0) L6470_SET_KVAL_HOLD(Y);
           #endif
-          #if AXIS_IS_L64XX(E1)
-            case 1: L6470_SET_KVAL_HOLD(E1); break;
+          #if AXIS_IS_L64XX(Y2)
+            if (index == 1) L6470_SET_KVAL_HOLD(Y2);
           #endif
-          #if AXIS_IS_L64XX(E2)
-            case 2: L6470_SET_KVAL_HOLD(E2); break;
+          break;
+      #endif
+
+      #if HAS_Z_AXIS
+        case Z_AXIS:
+          #if AXIS_IS_L64XX(Z)
+            if (index == 0) L6470_SET_KVAL_HOLD(Z);
           #endif
-          #if AXIS_IS_L64XX(E3)
-            case 3: L6470_SET_KVAL_HOLD(E3); break;
+          #if AXIS_IS_L64XX(Z2)
+            if (index == 1) L6470_SET_KVAL_HOLD(Z2);
           #endif
-          #if AXIS_IS_L64XX(E4)
-            case 4: L6470_SET_KVAL_HOLD(E4); break;
+          #if AXIS_IS_L64XX(Z3)
+            if (index == 2) L6470_SET_KVAL_HOLD(Z3);
           #endif
-          #if AXIS_IS_L64XX(E5)
-            case 5: L6470_SET_KVAL_HOLD(E5); break;
+          #if AXIS_DRIVER_TYPE_Z4(L6470)
+            if (index == 3) L6470_SET_KVAL_HOLD(Z4);
           #endif
-          #if AXIS_IS_L64XX(E6)
-            case 6: L6470_SET_KVAL_HOLD(E6); break;
-          #endif
-          #if AXIS_IS_L64XX(E7)
-            case 7: L6470_SET_KVAL_HOLD(E7); break;
-          #endif
-        }
-      } break;
+          break;
+      #endif
+
+      #if HAS_EXTRUDERS
+        case E_AXIS: {
+          const int8_t target_extruder = get_target_extruder_from_command();
+          if (target_extruder < 0) return;
+          switch (target_extruder) {
+            #if AXIS_IS_L64XX(E0)
+              case 0: L6470_SET_KVAL_HOLD(E0); break;
+            #endif
+            #if AXIS_IS_L64XX(E1)
+              case 1: L6470_SET_KVAL_HOLD(E1); break;
+            #endif
+            #if AXIS_IS_L64XX(E2)
+              case 2: L6470_SET_KVAL_HOLD(E2); break;
+            #endif
+            #if AXIS_IS_L64XX(E3)
+              case 3: L6470_SET_KVAL_HOLD(E3); break;
+            #endif
+            #if AXIS_IS_L64XX(E4)
+              case 4: L6470_SET_KVAL_HOLD(E4); break;
+            #endif
+            #if AXIS_IS_L64XX(E5)
+              case 5: L6470_SET_KVAL_HOLD(E5); break;
+            #endif
+            #if AXIS_IS_L64XX(E6)
+              case 6: L6470_SET_KVAL_HOLD(E6); break;
+            #endif
+            #if AXIS_IS_L64XX(E7)
+              case 7: L6470_SET_KVAL_HOLD(E7); break;
+            #endif
+          }
+        } break;
+      #endif
     }
   }
 

Marlin/src/gcode/feature/leds/M150.cpp

@@ -66,12 +66,12 @@ void GcodeSuite::M150() {
     #endif
   #endif
 
-  const LEDColor color = MakeLEDColor(
+  const LEDColor color = LEDColor(
     parser.seen('R') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
     parser.seen('U') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
-    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
-    parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0,
-    parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : brightness
+    parser.seen('B') ? (parser.has_value() ? parser.value_byte() : 255) : 0
+    OPTARG(HAS_WHITE_LED, parser.seen('W') ? (parser.has_value() ? parser.value_byte() : 255) : 0)
+    OPTARG(NEOPIXEL_LED, parser.seen('P') ? (parser.has_value() ? parser.value_byte() : 255) : brightness)
   );
 
   #if ENABLED(NEOPIXEL2_SEPARATE)

Marlin/src/gcode/feature/pause/G60.cpp

@@ -47,12 +47,13 @@ void GcodeSuite::G60() {
   SBI(saved_slots[slot >> 3], slot & 0x07);
 
   #if ENABLED(SAVED_POSITIONS_DEBUG)
-    const xyze_pos_t &pos = stored_position[slot];
     DEBUG_ECHOPAIR(STR_SAVED_POS " S", slot);
-    DEBUG_ECHOPAIR_F(" : X", pos.x);
-    DEBUG_ECHOPAIR_F_P(SP_Y_STR, pos.y);
-    DEBUG_ECHOPAIR_F_P(SP_Z_STR, pos.z);
-    DEBUG_ECHOLNPAIR_F_P(SP_E_STR, pos.e);
+    const xyze_pos_t &pos = stored_position[slot];
+    DEBUG_ECHOLNPAIR_F_P(
+      LIST_N(DOUBLE(LOGICAL_AXES), SP_E_STR, pos.e,
+      PSTR(" : X"), pos.x, SP_Y_STR, pos.y, SP_Z_STR, pos.z,
+      SP_I_STR, pos.i, SP_J_STR, pos.j, SP_K_STR, pos.k)
+    );
   #endif
 }
 

Marlin/src/gcode/feature/pause/G61.cpp

@@ -37,8 +37,7 @@
  *
  *   F<rate>  - Feedrate (optional) for the move back.
  *   S<slot>  - Slot # (0-based) to restore from (default 0).
- *   X Y Z    - Axes to restore. At least one is required.
- *   E - Restore extruder position
+ *   X Y Z E  - Axes to restore. At least one is required.
  *
  *   If XYZE are not given, default restore uses the smart blocking move.
  */
@@ -46,7 +45,7 @@ void GcodeSuite::G61(void) {
 
   const uint8_t slot = parser.byteval('S');
 
-  #define SYNC_E(POINT) planner.set_e_position_mm((destination.e = current_position.e = (POINT)))
+  #define SYNC_E(POINT) TERN_(HAS_EXTRUDERS, planner.set_e_position_mm((destination.e = current_position.e = (POINT))))
 
   #if SAVED_POSITIONS < 256
     if (slot >= SAVED_POSITIONS) {
@@ -69,7 +68,7 @@ void GcodeSuite::G61(void) {
     SYNC_E(stored_position[slot].e);
   }
   else {
-    if (parser.seen("XYZ")) {
+    if (parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))) {
       DEBUG_ECHOPAIR(STR_RESTORING_POS " S", slot);
       LOOP_LINEAR_AXES(i) {
         destination[i] = parser.seen(AXIS_CHAR(i))
@@ -82,10 +81,12 @@ void GcodeSuite::G61(void) {
       // Move to the saved position
       prepare_line_to_destination();
     }
-    if (parser.seen_test('E')) {
-      DEBUG_ECHOLNPAIR(STR_RESTORING_POS " S", slot, " E", current_position.e, "=>", stored_position[slot].e);
-      SYNC_E(stored_position[slot].e);
-    }
+    #if HAS_EXTRUDERS
+      if (parser.seen_test('E')) {
+        DEBUG_ECHOLNPAIR(STR_RESTORING_POS " S", slot, " E", current_position.e, "=>", stored_position[slot].e);
+        SYNC_E(stored_position[slot].e);
+      }
+    #endif
   }
 
   feedrate_mm_s = saved_feedrate;

Marlin/src/gcode/feature/trinamic/M122.cpp

@@ -35,7 +35,7 @@ void GcodeSuite::M122() {
   xyze_bool_t print_axis = ARRAY_N_1(LOGICAL_AXES, false);
 
   bool print_all = true;
-  LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) { print_axis[i] = true; print_all = false; }
+  LOOP_LOGICAL_AXES(i) if (parser.seen_test(axis_codes[i])) { print_axis[i] = true; print_all = false; }
 
   if (print_all) LOOP_LOGICAL_AXES(i) print_axis[i] = true;
 
@@ -50,12 +50,12 @@ void GcodeSuite::M122() {
     #endif
 
     if (parser.seen_test('V'))
-      tmc_get_registers(print_axis.x, print_axis.y, print_axis.z, print_axis.e);
+      tmc_get_registers(LOGICAL_AXIS_ELEM(print_axis));
     else
-      tmc_report_all(print_axis.x, print_axis.y, print_axis.z, print_axis.e);
+      tmc_report_all(LOGICAL_AXIS_ELEM(print_axis));
   #endif
 
-  test_tmc_connection(print_axis.x, print_axis.y, print_axis.z, print_axis.e);
+  test_tmc_connection(LOGICAL_AXIS_ELEM(print_axis));
 }
 
 #endif // HAS_TRINAMIC_CONFIG

Marlin/src/gcode/feature/trinamic/M569.cpp

@@ -43,129 +43,83 @@ void tmc_set_stealthChop(TMC &st, const bool enable) {
 static void set_stealth_status(const bool enable, const int8_t target_extruder) {
   #define TMC_SET_STEALTH(Q) tmc_set_stealthChop(stepper##Q, enable)
 
-  #if    AXIS_HAS_STEALTHCHOP(X)  || AXIS_HAS_STEALTHCHOP(X2) \
-      || AXIS_HAS_STEALTHCHOP(Y)  || AXIS_HAS_STEALTHCHOP(Y2) \
-      || AXIS_HAS_STEALTHCHOP(Z)  || AXIS_HAS_STEALTHCHOP(Z2) \
-      || AXIS_HAS_STEALTHCHOP(Z3) || AXIS_HAS_STEALTHCHOP(Z4)
+  #if    X_HAS_STEALTHCHOP  || Y_HAS_STEALTHCHOP  || Z_HAS_STEALTHCHOP \
+      || I_HAS_STEALTHCHOP  || J_HAS_STEALTHCHOP  || K_HAS_STEALTHCHOP \
+      || X2_HAS_STEALTHCHOP || Y2_HAS_STEALTHCHOP || Z2_HAS_STEALTHCHOP || Z3_HAS_STEALTHCHOP || Z4_HAS_STEALTHCHOP
     const uint8_t index = parser.byteval('I');
   #endif
 
   LOOP_LOGICAL_AXES(i) if (parser.seen(axis_codes[i])) {
     switch (i) {
       case X_AXIS:
-        #if AXIS_HAS_STEALTHCHOP(X)
-          if (index == 0) TMC_SET_STEALTH(X);
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(X2)
-          if (index == 1) TMC_SET_STEALTH(X2);
-        #endif
+        TERN_(X_HAS_STEALTHCHOP,  if (index == 0) TMC_SET_STEALTH(X));
+        TERN_(X2_HAS_STEALTHCHOP, if (index == 1) TMC_SET_STEALTH(X2));
         break;
-      case Y_AXIS:
-        #if AXIS_HAS_STEALTHCHOP(Y)
-          if (index == 0) TMC_SET_STEALTH(Y);
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Y2)
-          if (index == 1) TMC_SET_STEALTH(Y2);
-        #endif
-        break;
-      case Z_AXIS:
-        #if AXIS_HAS_STEALTHCHOP(Z)
-          if (index == 0) TMC_SET_STEALTH(Z);
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Z2)
-          if (index == 1) TMC_SET_STEALTH(Z2);
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Z3)
-          if (index == 2) TMC_SET_STEALTH(Z3);
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Z4)
-          if (index == 3) TMC_SET_STEALTH(Z4);
-        #endif
-        break;
-      case E_AXIS: {
-        if (target_extruder < 0) return;
-        switch (target_extruder) {
-          #if AXIS_HAS_STEALTHCHOP(E0)
-            case 0: TMC_SET_STEALTH(E0); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E1)
-            case 1: TMC_SET_STEALTH(E1); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E2)
-            case 2: TMC_SET_STEALTH(E2); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E3)
-            case 3: TMC_SET_STEALTH(E3); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E4)
-            case 4: TMC_SET_STEALTH(E4); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E5)
-            case 5: TMC_SET_STEALTH(E5); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E6)
-            case 6: TMC_SET_STEALTH(E6); break;
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(E7)
-            case 7: TMC_SET_STEALTH(E7); break;
-          #endif
-        }
-      } break;
+
+      #if HAS_Y_AXIS
+        case Y_AXIS:
+          TERN_(Y_HAS_STEALTHCHOP,  if (index == 0) TMC_SET_STEALTH(Y));
+          TERN_(Y2_HAS_STEALTHCHOP, if (index == 1) TMC_SET_STEALTH(Y2));
+          break;
+      #endif
+
+      #if HAS_Z_AXIS
+        case Z_AXIS:
+          TERN_(Z_HAS_STEALTHCHOP,  if (index == 0) TMC_SET_STEALTH(Z));
+          TERN_(Z2_HAS_STEALTHCHOP, if (index == 1) TMC_SET_STEALTH(Z2));
+          TERN_(Z3_HAS_STEALTHCHOP, if (index == 2) TMC_SET_STEALTH(Z3));
+          TERN_(Z4_HAS_STEALTHCHOP, if (index == 3) TMC_SET_STEALTH(Z4));
+          break;
+      #endif
+
+      #if I_HAS_STEALTHCHOP
+        case I_AXIS: TMC_SET_STEALTH(I); break;
+      #endif
+      #if J_HAS_STEALTHCHOP
+        case J_AXIS: TMC_SET_STEALTH(J); break;
+      #endif
+      #if K_HAS_STEALTHCHOP
+        case K_AXIS: TMC_SET_STEALTH(K); break;
+      #endif
+
+      #if HAS_EXTRUDERS
+        case E_AXIS: {
+          if (target_extruder < 0) return;
+          OPTCODE(E0_HAS_STEALTHCHOP, else if (target_extruder == 0) TMC_SET_STEALTH(E0))
+          OPTCODE(E1_HAS_STEALTHCHOP, else if (target_extruder == 1) TMC_SET_STEALTH(E1))
+          OPTCODE(E2_HAS_STEALTHCHOP, else if (target_extruder == 2) TMC_SET_STEALTH(E2))
+          OPTCODE(E3_HAS_STEALTHCHOP, else if (target_extruder == 3) TMC_SET_STEALTH(E3))
+          OPTCODE(E4_HAS_STEALTHCHOP, else if (target_extruder == 4) TMC_SET_STEALTH(E4))
+          OPTCODE(E5_HAS_STEALTHCHOP, else if (target_extruder == 5) TMC_SET_STEALTH(E5))
+          OPTCODE(E6_HAS_STEALTHCHOP, else if (target_extruder == 6) TMC_SET_STEALTH(E6))
+          OPTCODE(E7_HAS_STEALTHCHOP, else if (target_extruder == 7) TMC_SET_STEALTH(E7))
+        } break;
+      #endif
     }
   }
 }
 
 static void say_stealth_status() {
   #define TMC_SAY_STEALTH_STATUS(Q) tmc_say_stealth_status(stepper##Q)
-
-  #if AXIS_HAS_STEALTHCHOP(X)
-    TMC_SAY_STEALTH_STATUS(X);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(X2)
-    TMC_SAY_STEALTH_STATUS(X2);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Y)
-    TMC_SAY_STEALTH_STATUS(Y);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Y2)
-    TMC_SAY_STEALTH_STATUS(Y2);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Z)
-    TMC_SAY_STEALTH_STATUS(Z);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Z2)
-    TMC_SAY_STEALTH_STATUS(Z2);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Z3)
-    TMC_SAY_STEALTH_STATUS(Z3);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(Z4)
-    TMC_SAY_STEALTH_STATUS(Z4);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E0)
-    TMC_SAY_STEALTH_STATUS(E0);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E1)
-    TMC_SAY_STEALTH_STATUS(E1);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E2)
-    TMC_SAY_STEALTH_STATUS(E2);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E3)
-    TMC_SAY_STEALTH_STATUS(E3);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E4)
-    TMC_SAY_STEALTH_STATUS(E4);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E5)
-    TMC_SAY_STEALTH_STATUS(E5);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E6)
-    TMC_SAY_STEALTH_STATUS(E6);
-  #endif
-  #if AXIS_HAS_STEALTHCHOP(E7)
-    TMC_SAY_STEALTH_STATUS(E7);
-  #endif
+  OPTCODE( X_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(X))
+  OPTCODE(X2_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(X2))
+  OPTCODE( Y_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Y))
+  OPTCODE(Y2_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Y2))
+  OPTCODE( Z_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Z))
+  OPTCODE(Z2_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Z2))
+  OPTCODE(Z3_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Z3))
+  OPTCODE(Z4_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(Z4))
+  OPTCODE( I_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(I))
+  OPTCODE( J_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(J))
+  OPTCODE( K_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(K))
+  OPTCODE(E0_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E0))
+  OPTCODE(E1_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E1))
+  OPTCODE(E2_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E2))
+  OPTCODE(E3_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E3))
+  OPTCODE(E4_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E4))
+  OPTCODE(E5_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E5))
+  OPTCODE(E6_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E6))
+  OPTCODE(E7_HAS_STEALTHCHOP, TMC_SAY_STEALTH_STATUS(E7))
 }
 
 /**

Marlin/src/gcode/feature/trinamic/M906.cpp

@@ -48,7 +48,7 @@ void GcodeSuite::M906() {
 
   bool report = true;
 
-  #if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z) || AXIS_IS_TMC(Z2) || AXIS_IS_TMC(Z3) || AXIS_IS_TMC(Z4)
+  #if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z) || AXIS_IS_TMC(Z2) || AXIS_IS_TMC(Z3) || AXIS_IS_TMC(Z4) || AXIS_IS_TMC(I) || AXIS_IS_TMC(J) || AXIS_IS_TMC(K)
     const uint8_t index = parser.byteval('I');
   #endif
 
@@ -63,58 +63,77 @@ void GcodeSuite::M906() {
           if (index == 1) TMC_SET_CURRENT(X2);
         #endif
         break;
-      case Y_AXIS:
-        #if AXIS_IS_TMC(Y)
-          if (index == 0) TMC_SET_CURRENT(Y);
-        #endif
-        #if AXIS_IS_TMC(Y2)
-          if (index == 1) TMC_SET_CURRENT(Y2);
-        #endif
-        break;
-      case Z_AXIS:
-        #if AXIS_IS_TMC(Z)
-          if (index == 0) TMC_SET_CURRENT(Z);
-        #endif
-        #if AXIS_IS_TMC(Z2)
-          if (index == 1) TMC_SET_CURRENT(Z2);
-        #endif
-        #if AXIS_IS_TMC(Z3)
-          if (index == 2) TMC_SET_CURRENT(Z3);
-        #endif
-        #if AXIS_IS_TMC(Z4)
-          if (index == 3) TMC_SET_CURRENT(Z4);
-        #endif
-        break;
-      case E_AXIS: {
-        const int8_t target_extruder = get_target_extruder_from_command();
-        if (target_extruder < 0) return;
-        switch (target_extruder) {
-          #if AXIS_IS_TMC(E0)
-            case 0: TMC_SET_CURRENT(E0); break;
+
+      #if HAS_Y_AXIS
+        case Y_AXIS:
+          #if AXIS_IS_TMC(Y)
+            if (index == 0) TMC_SET_CURRENT(Y);
           #endif
-          #if AXIS_IS_TMC(E1)
-            case 1: TMC_SET_CURRENT(E1); break;
+          #if AXIS_IS_TMC(Y2)
+            if (index == 1) TMC_SET_CURRENT(Y2);
           #endif
-          #if AXIS_IS_TMC(E2)
-            case 2: TMC_SET_CURRENT(E2); break;
+          break;
+      #endif
+
+      #if HAS_Z_AXIS
+        case Z_AXIS:
+          #if AXIS_IS_TMC(Z)
+            if (index == 0) TMC_SET_CURRENT(Z);
           #endif
-          #if AXIS_IS_TMC(E3)
-            case 3: TMC_SET_CURRENT(E3); break;
+          #if AXIS_IS_TMC(Z2)
+            if (index == 1) TMC_SET_CURRENT(Z2);
           #endif
-          #if AXIS_IS_TMC(E4)
-            case 4: TMC_SET_CURRENT(E4); break;
+          #if AXIS_IS_TMC(Z3)
+            if (index == 2) TMC_SET_CURRENT(Z3);
           #endif
-          #if AXIS_IS_TMC(E5)
-            case 5: TMC_SET_CURRENT(E5); break;
+          #if AXIS_IS_TMC(Z4)
+            if (index == 3) TMC_SET_CURRENT(Z4);
           #endif
-          #if AXIS_IS_TMC(E6)
-            case 6: TMC_SET_CURRENT(E6); break;
-          #endif
-          #if AXIS_IS_TMC(E7)
-            case 7: TMC_SET_CURRENT(E7); break;
-          #endif
-        }
-      } break;
+          break;
+      #endif
+
+      #if AXIS_IS_TMC(I)
+        case I_AXIS: TMC_SET_CURRENT(I); break;
+      #endif
+      #if AXIS_IS_TMC(J)
+        case J_AXIS: TMC_SET_CURRENT(J); break;
+      #endif
+      #if AXIS_IS_TMC(K)
+        case K_AXIS: TMC_SET_CURRENT(K); break;
+      #endif
+
+      #if HAS_EXTRUDERS
+        case E_AXIS: {
+          const int8_t target_extruder = get_target_extruder_from_command();
+          if (target_extruder < 0) return;
+          switch (target_extruder) {
+            #if AXIS_IS_TMC(E0)
+              case 0: TMC_SET_CURRENT(E0); break;
+            #endif
+            #if AXIS_IS_TMC(E1)
+              case 1: TMC_SET_CURRENT(E1); break;
+            #endif
+            #if AXIS_IS_TMC(E2)
+              case 2: TMC_SET_CURRENT(E2); break;
+            #endif
+            #if AXIS_IS_TMC(E3)
+              case 3: TMC_SET_CURRENT(E3); break;
+            #endif
+            #if AXIS_IS_TMC(E4)
+              case 4: TMC_SET_CURRENT(E4); break;
+            #endif
+            #if AXIS_IS_TMC(E5)
+              case 5: TMC_SET_CURRENT(E5); break;
+            #endif
+            #if AXIS_IS_TMC(E6)
+              case 6: TMC_SET_CURRENT(E6); break;
+            #endif
+            #if AXIS_IS_TMC(E7)
+              case 7: TMC_SET_CURRENT(E7); break;
+            #endif
+          }
+        } break;
+      #endif
     }
   }
 
@@ -143,6 +162,15 @@ void GcodeSuite::M906() {
     #if AXIS_IS_TMC(Z4)
       TMC_SAY_CURRENT(Z4);
     #endif
+    #if AXIS_IS_TMC(I)
+      TMC_SAY_CURRENT(I);
+    #endif
+    #if AXIS_IS_TMC(J)
+      TMC_SAY_CURRENT(J);
+    #endif
+    #if AXIS_IS_TMC(K)
+      TMC_SAY_CURRENT(K);
+    #endif
     #if AXIS_IS_TMC(E0)
       TMC_SAY_CURRENT(E0);
     #endif

Marlin/src/gcode/feature/trinamic/M911-M914.cpp

@@ -38,18 +38,27 @@
   #if M91x_USE(X) || M91x_USE(X2)
     #define M91x_SOME_X 1
   #endif
-  #if M91x_USE(Y) || M91x_USE(Y2)
+  #if LINEAR_AXES >= 2 && (M91x_USE(Y) || M91x_USE(Y2))
     #define M91x_SOME_Y 1
   #endif
-  #if M91x_USE(Z) || M91x_USE(Z2) || M91x_USE(Z3) || M91x_USE(Z4)
+  #if HAS_Z_AXIS && (M91x_USE(Z) || M91x_USE(Z2) || M91x_USE(Z3) || M91x_USE(Z4))
     #define M91x_SOME_Z 1
   #endif
+  #if LINEAR_AXES >= 4 && M91x_USE(I)
+    #define M91x_USE_I 1
+  #endif
+  #if LINEAR_AXES >= 5 && M91x_USE(J)
+    #define M91x_USE_J 1
+  #endif
+  #if LINEAR_AXES >= 6 && M91x_USE(K)
+    #define M91x_USE_K 1
+  #endif
 
   #if M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) || M91x_USE_E(5) || M91x_USE_E(6) || M91x_USE_E(7)
     #define M91x_SOME_E 1
   #endif
 
-  #if !M91x_SOME_X && !M91x_SOME_Y && !M91x_SOME_Z && !M91x_SOME_E
+  #if !M91x_SOME_X && !M91x_SOME_Y && !M91x_SOME_Z && !M91x_USE_I && !M91x_USE_J && !M91x_USE_K && !M91x_SOME_E
     #error "MONITOR_DRIVER_STATUS requires at least one TMC2130, 2160, 2208, 2209, 2660, 5130, or 5160."
   #endif
 
@@ -82,6 +91,9 @@
     #if M91x_USE(Z4)
       tmc_report_otpw(stepperZ4);
     #endif
+    TERN_(M91x_USE_I, tmc_report_otpw(stepperI));
+    TERN_(M91x_USE_J, tmc_report_otpw(stepperJ));
+    TERN_(M91x_USE_K, tmc_report_otpw(stepperK));
     #if M91x_USE_E(0)
       tmc_report_otpw(stepperE0);
     #endif
@@ -124,9 +136,12 @@
     const bool hasX = TERN0(M91x_SOME_X, parser.seen(axis_codes.x)),
                hasY = TERN0(M91x_SOME_Y, parser.seen(axis_codes.y)),
                hasZ = TERN0(M91x_SOME_Z, parser.seen(axis_codes.z)),
+               hasI = TERN0(M91x_USE_I,  parser.seen(axis_codes.i)),
+               hasJ = TERN0(M91x_USE_J,  parser.seen(axis_codes.j)),
+               hasK = TERN0(M91x_USE_K,  parser.seen(axis_codes.k)),
                hasE = TERN0(M91x_SOME_E, parser.seen(axis_codes.e));
 
-    const bool hasNone = !hasE && !hasX && !hasY && !hasZ;
+    const bool hasNone = !hasE && !hasX && !hasY && !hasZ && !hasI && !hasJ && !hasK;
 
     #if M91x_SOME_X
       const int8_t xval = int8_t(parser.byteval(axis_codes.x, 0xFF));
@@ -164,6 +179,19 @@
       #endif
     #endif
 
+    #if M91x_USE_I
+      const int8_t ival = int8_t(parser.byteval(axis_codes.i, 0xFF));
+      if (hasNone || ival == 1 || (hasI && ival < 0)) tmc_clear_otpw(stepperI);
+    #endif
+    #if M91x_USE_J
+      const int8_t jval = int8_t(parser.byteval(axis_codes.j, 0xFF));
+      if (hasNone || jval == 1 || (hasJ && jval < 0)) tmc_clear_otpw(stepperJ);
+    #endif
+    #if M91x_USE_K
+      const int8_t kval = int8_t(parser.byteval(axis_codes.k, 0xFF));
+      if (hasNone || kval == 1 || (hasK && kval < 0)) tmc_clear_otpw(stepperK);
+    #endif
+
     #if M91x_SOME_E
       const int8_t eval = int8_t(parser.byteval(axis_codes.e, 0xFF));
       #if M91x_USE_E(0)
@@ -206,126 +234,76 @@
     #define TMC_SET_PWMTHRS_E(E) stepperE##E.set_pwm_thrs(value)
 
     bool report = true;
-    #if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z) || AXIS_IS_TMC(Z2) || AXIS_IS_TMC(Z3) || AXIS_IS_TMC(Z4)
+    #if AXIS_IS_TMC(X) || AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z) || AXIS_IS_TMC(Z2) || AXIS_IS_TMC(Z3) || AXIS_IS_TMC(Z4) || AXIS_IS_TMC(I) || AXIS_IS_TMC(J) || AXIS_IS_TMC(K)
       const uint8_t index = parser.byteval('I');
     #endif
     LOOP_LOGICAL_AXES(i) if (int32_t value = parser.longval(axis_codes[i])) {
       report = false;
       switch (i) {
         case X_AXIS:
-          #if AXIS_HAS_STEALTHCHOP(X)
-            if (index < 2) TMC_SET_PWMTHRS(X,X);
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(X2)
-            if (!(index & 1)) TMC_SET_PWMTHRS(X,X2);
-          #endif
+          TERN_(X_HAS_STEALTHCHOP,  if (index < 2) TMC_SET_PWMTHRS(X,X));
+          TERN_(X2_HAS_STEALTHCHOP, if (!(index & 1)) TMC_SET_PWMTHRS(X,X2));
           break;
         case Y_AXIS:
-          #if AXIS_HAS_STEALTHCHOP(Y)
-            if (index < 2) TMC_SET_PWMTHRS(Y,Y);
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(Y2)
-            if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2);
-          #endif
+          TERN_(Y_HAS_STEALTHCHOP,  if (index < 2) TMC_SET_PWMTHRS(Y,Y));
+          TERN_(Y2_HAS_STEALTHCHOP, if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2));
           break;
+
+        #if I_HAS_STEALTHCHOP
+          case I_AXIS: TMC_SET_PWMTHRS(I,I); break;
+        #endif
+        #if J_HAS_STEALTHCHOP
+          case J_AXIS: TMC_SET_PWMTHRS(J,J); break;
+        #endif
+        #if K_HAS_STEALTHCHOP
+          case K_AXIS: TMC_SET_PWMTHRS(K,K); break;
+        #endif
+
         case Z_AXIS:
-          #if AXIS_HAS_STEALTHCHOP(Z)
-            if (index < 2) TMC_SET_PWMTHRS(Z,Z);
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(Z2)
-            if (index == 0 || index == 2) TMC_SET_PWMTHRS(Z,Z2);
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(Z3)
-            if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3);
-          #endif
-          #if AXIS_HAS_STEALTHCHOP(Z4)
-            if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4);
-          #endif
+          TERN_(Z_HAS_STEALTCHOP, if (index < 2) TMC_SET_PWMTHRS(Z,Z));
+          TERN_(Z2_HAS_STEALTCHOP, if (index == 0 || index == 2) TMC_SET_PWMTHRS(Z,Z2));
+          TERN_(Z3_HAS_STEALTCHOP, if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3));
+          TERN_(Z4_HAS_STEALTCHOP, if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4));
           break;
         case E_AXIS: {
           #if E_STEPPERS
             const int8_t target_extruder = get_target_extruder_from_command();
             if (target_extruder < 0) return;
-            switch (target_extruder) {
-              #if AXIS_HAS_STEALTHCHOP(E0)
-                case 0: TMC_SET_PWMTHRS_E(0); break;
-              #endif
-              #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
-                case 1: TMC_SET_PWMTHRS_E(1); break;
-              #endif
-              #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
-                case 2: TMC_SET_PWMTHRS_E(2); break;
-              #endif
-              #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
-                case 3: TMC_SET_PWMTHRS_E(3); break;
-              #endif
-              #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
-                case 4: TMC_SET_PWMTHRS_E(4); break;
-              #endif
-              #if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5)
-                case 5: TMC_SET_PWMTHRS_E(5); break;
-              #endif
-              #if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6)
-                case 6: TMC_SET_PWMTHRS_E(6); break;
-              #endif
-              #if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7)
-                case 7: TMC_SET_PWMTHRS_E(7); break;
-              #endif
-            }
+            TERN_(E0_HAS_STEALTHCHOP, else if (target_extruder == 0) TMC_SET_PWMTHRS_E(0));
+            TERN_(E1_HAS_STEALTHCHOP, else if (target_extruder == 1) TMC_SET_PWMTHRS_E(1));
+            TERN_(E2_HAS_STEALTHCHOP, else if (target_extruder == 2) TMC_SET_PWMTHRS_E(2));
+            TERN_(E3_HAS_STEALTHCHOP, else if (target_extruder == 3) TMC_SET_PWMTHRS_E(3));
+            TERN_(E4_HAS_STEALTHCHOP, else if (target_extruder == 4) TMC_SET_PWMTHRS_E(4));
+            TERN_(E5_HAS_STEALTHCHOP, else if (target_extruder == 5) TMC_SET_PWMTHRS_E(5));
+            TERN_(E6_HAS_STEALTHCHOP, else if (target_extruder == 6) TMC_SET_PWMTHRS_E(6));
+            TERN_(E7_HAS_STEALTHCHOP, else if (target_extruder == 7) TMC_SET_PWMTHRS_E(7));
           #endif // E_STEPPERS
         } break;
       }
     }
 
     if (report) {
-      #if AXIS_HAS_STEALTHCHOP(X)
-        TMC_SAY_PWMTHRS(X,X);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(X2)
-        TMC_SAY_PWMTHRS(X,X2);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Y)
-        TMC_SAY_PWMTHRS(Y,Y);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Y2)
-        TMC_SAY_PWMTHRS(Y,Y2);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Z)
-        TMC_SAY_PWMTHRS(Z,Z);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Z2)
-        TMC_SAY_PWMTHRS(Z,Z2);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Z3)
-        TMC_SAY_PWMTHRS(Z,Z3);
-      #endif
-      #if AXIS_HAS_STEALTHCHOP(Z4)
-        TMC_SAY_PWMTHRS(Z,Z4);
-      #endif
-      #if E_STEPPERS && AXIS_HAS_STEALTHCHOP(E0)
-        TMC_SAY_PWMTHRS_E(0);
-      #endif
-      #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
-        TMC_SAY_PWMTHRS_E(1);
-      #endif
-      #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
-        TMC_SAY_PWMTHRS_E(2);
-      #endif
-      #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
-        TMC_SAY_PWMTHRS_E(3);
-      #endif
-      #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
-        TMC_SAY_PWMTHRS_E(4);
-      #endif
-      #if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5)
-        TMC_SAY_PWMTHRS_E(5);
-      #endif
-      #if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6)
-        TMC_SAY_PWMTHRS_E(6);
-      #endif
-      #if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7)
-        TMC_SAY_PWMTHRS_E(7);
-      #endif
+      TERN_( X_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(X,X));
+      TERN_(X2_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(X,X2));
+      TERN_( Y_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Y,Y));
+      TERN_(Y2_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Y,Y2));
+      TERN_( Z_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Z,Z));
+      TERN_(Z2_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Z,Z2));
+      TERN_(Z3_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Z,Z3));
+      TERN_(Z4_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(Z,Z4));
+
+      TERN_( I_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(I,I));
+      TERN_( J_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(J,J));
+      TERN_( K_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS(K,K));
+
+      TERN_(E0_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(0));
+      TERN_(E1_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(1));
+      TERN_(E2_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(2));
+      TERN_(E3_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(3));
+      TERN_(E4_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(4));
+      TERN_(E5_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(5));
+      TERN_(E6_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(6));
+      TERN_(E7_HAS_STEALTHCHOP, TMC_SAY_PWMTHRS_E(7));
     }
   }
 #endif // HYBRID_THRESHOLD
@@ -378,6 +356,15 @@
             #endif
             break;
         #endif
+        #if I_SENSORLESS && AXIS_HAS_STALLGUARD(I)
+          case I_AXIS: stepperI.homing_threshold(value); break;
+        #endif
+        #if J_SENSORLESS && AXIS_HAS_STALLGUARD(J)
+          case J_AXIS: stepperJ.homing_threshold(value); break;
+        #endif
+        #if K_SENSORLESS && AXIS_HAS_STALLGUARD(K)
+          case K_AXIS: stepperK.homing_threshold(value); break;
+        #endif
       }
     }
 
@@ -412,6 +399,15 @@
           tmc_print_sgt(stepperZ4);
         #endif
       #endif
+      #if I_SENSORLESS && AXIS_HAS_STALLGUARD(I)
+        tmc_print_sgt(stepperI);
+      #endif
+      #if J_SENSORLESS && AXIS_HAS_STALLGUARD(J)
+        tmc_print_sgt(stepperJ);
+      #endif
+      #if K_SENSORLESS && AXIS_HAS_STALLGUARD(K)
+        tmc_print_sgt(stepperK);
+      #endif
     }
   }
 #endif // USE_SENSORLESS

Marlin/src/gcode/gcode.cpp

@@ -74,11 +74,14 @@ millis_t GcodeSuite::previous_move_ms = 0,
 
 // Relative motion mode for each logical axis
 static constexpr xyze_bool_t ar_init = AXIS_RELATIVE_MODES;
-uint8_t GcodeSuite::axis_relative = (
-    (ar_init.x ? _BV(REL_X) : 0)
-  | (ar_init.y ? _BV(REL_Y) : 0)
-  | (ar_init.z ? _BV(REL_Z) : 0)
-  | (ar_init.e ? _BV(REL_E) : 0)
+uint8_t GcodeSuite::axis_relative = 0 LOGICAL_AXIS_GANG(
+  | (ar_init.e << REL_E),
+  | (ar_init.x << REL_X),
+  | (ar_init.y << REL_Y),
+  | (ar_init.z << REL_Z),
+  | (ar_init.i << REL_I),
+  | (ar_init.j << REL_J),
+  | (ar_init.k << REL_K)
 );
 
 #if EITHER(HAS_AUTO_REPORTING, HOST_KEEPALIVE_FEATURE)
@@ -161,13 +164,15 @@ void GcodeSuite::get_destination_from_command() {
       destination[i] = current_position[i];
   }
 
-  // Get new E position, whether absolute or relative
-  if ( (seen.e = parser.seenval('E')) ) {
-    const float v = parser.value_axis_units(E_AXIS);
-    destination.e = axis_is_relative(E_AXIS) ? current_position.e + v : v;
-  }
-  else
-    destination.e = current_position.e;
+  #if HAS_EXTRUDERS
+    // Get new E position, whether absolute or relative
+    if ( (seen.e = parser.seenval('E')) ) {
+      const float v = parser.value_axis_units(E_AXIS);
+      destination.e = axis_is_relative(E_AXIS) ? current_position.e + v : v;
+    }
+    else
+      destination.e = current_position.e;
+  #endif
 
   #if ENABLED(POWER_LOSS_RECOVERY) && !PIN_EXISTS(POWER_LOSS)
     // Only update power loss recovery on moves with E
@@ -605,7 +610,9 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
       case 92: M92(); break;                                      // M92: Set the steps-per-unit for one or more axes
       case 114: M114(); break;                                    // M114: Report current position
       case 115: M115(); break;                                    // M115: Report capabilities
-      case 117: M117(); break;                                    // M117: Set LCD message text, if possible
+
+      case 117: TERN_(HAS_STATUS_MESSAGE, M117()); break;         // M117: Set LCD message text, if possible
+
       case 118: M118(); break;                                    // M118: Display a message in the host console
       case 119: M119(); break;                                    // M119: Report endstop states
       case 120: M120(); break;                                    // M120: Enable endstops

Marlin/src/gcode/gcode.h

@@ -314,7 +314,12 @@
   #define HAS_FAST_MOVES 1
 #endif
 
-enum AxisRelative : uint8_t { REL_X, REL_Y, REL_Z, REL_E, E_MODE_ABS, E_MODE_REL };
+enum AxisRelative : uint8_t {
+  LOGICAL_AXIS_LIST(REL_E, REL_X, REL_Y, REL_Z, REL_I, REL_J, REL_K)
+  #if HAS_EXTRUDERS
+    , E_MODE_ABS, E_MODE_REL
+  #endif
+};
 
 extern const char G28_STR[];
 
@@ -324,23 +329,31 @@ public:
   static uint8_t axis_relative;
 
   static inline bool axis_is_relative(const AxisEnum a) {
-    if (a == E_AXIS) {
-      if (TEST(axis_relative, E_MODE_REL)) return true;
-      if (TEST(axis_relative, E_MODE_ABS)) return false;
-    }
+    #if HAS_EXTRUDERS
+      if (a == E_AXIS) {
+        if (TEST(axis_relative, E_MODE_REL)) return true;
+        if (TEST(axis_relative, E_MODE_ABS)) return false;
+      }
+    #endif
     return TEST(axis_relative, a);
   }
   static inline void set_relative_mode(const bool rel) {
-    axis_relative = rel ? _BV(REL_X) | _BV(REL_Y) | _BV(REL_Z) | _BV(REL_E) : 0;
-  }
-  static inline void set_e_relative() {
-    CBI(axis_relative, E_MODE_ABS);
-    SBI(axis_relative, E_MODE_REL);
-  }
-  static inline void set_e_absolute() {
-    CBI(axis_relative, E_MODE_REL);
-    SBI(axis_relative, E_MODE_ABS);
+    axis_relative = rel ? (0 LOGICAL_AXIS_GANG(
+      | _BV(REL_E),
+      | _BV(REL_X), | _BV(REL_Y), | _BV(REL_Z),
+      | _BV(REL_I), | _BV(REL_J), | _BV(REL_K)
+    )) : 0;
   }
+  #if HAS_EXTRUDERS
+    static inline void set_e_relative() {
+      CBI(axis_relative, E_MODE_ABS);
+      SBI(axis_relative, E_MODE_REL);
+    }
+    static inline void set_e_absolute() {
+      CBI(axis_relative, E_MODE_REL);
+      SBI(axis_relative, E_MODE_ABS);
+    }
+  #endif
 
   #if ENABLED(CNC_WORKSPACE_PLANES)
     /**
@@ -678,7 +691,11 @@ private:
 
   static void M114();
   static void M115();
-  static void M117();
+
+  #if HAS_STATUS_MESSAGE
+    static void M117();
+  #endif
+
   static void M118();
   static void M119();
   static void M120();

Marlin/src/gcode/geometry/G92.cpp

@@ -48,7 +48,10 @@
  */
 void GcodeSuite::G92() {
 
-  bool sync_E = false, sync_XYZE = false;
+  #if HAS_EXTRUDERS
+    bool sync_E = false;
+  #endif
+  bool sync_XYZE = false;
 
   #if USE_GCODE_SUBCODES
     const uint8_t subcode_G92 = parser.subcode;
@@ -72,7 +75,11 @@ void GcodeSuite::G92() {
       case 9:                                                         // G92.9 - Set Current Position directly (like Marlin 1.0)
         LOOP_LOGICAL_AXES(i) {
           if (parser.seenval(axis_codes[i])) {
-            if (i == E_AXIS) sync_E = true; else sync_XYZE = true;
+            if (TERN1(HAS_EXTRUDERS, i != E_AXIS))
+              sync_XYZE = true;
+            else {
+              TERN_(HAS_EXTRUDERS, sync_E = true);
+            }
             current_position[i] = parser.value_axis_units((AxisEnum)i);
           }
         }
@@ -83,20 +90,26 @@ void GcodeSuite::G92() {
       LOOP_LOGICAL_AXES(i) {
         if (parser.seenval(axis_codes[i])) {
           const float l = parser.value_axis_units((AxisEnum)i),       // Given axis coordinate value, converted to millimeters
-                      v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i),  // Axis position in NATIVE space (applying the existing offset)
+                      v = TERN0(HAS_EXTRUDERS, i == E_AXIS) ? l : LOGICAL_TO_NATIVE(l, i),  // Axis position in NATIVE space (applying the existing offset)
                       d = v - current_position[i];                    // How much is the current axis position altered by?
           if (!NEAR_ZERO(d)) {
             #if HAS_POSITION_SHIFT && !IS_SCARA                       // When using workspaces...
-              if (i == E_AXIS) {
-                sync_E = true;
-                current_position.e = v;                               // ...E is still set directly
-              }
-              else {
-                position_shift[i] += d;                               // ...but other axes offset the workspace.
+              if (TERN1(HAS_EXTRUDERS, i != E_AXIS)) {
+                position_shift[i] += d;                               // ...most axes offset the workspace...
                 update_workspace_offset((AxisEnum)i);
               }
+              else {
+                #if HAS_EXTRUDERS
+                  sync_E = true;
+                  current_position.e = v;                             // ...but E is set directly
+                #endif
+              }
             #else                                                     // Without workspaces...
-              if (i == E_AXIS) sync_E = true; else sync_XYZE = true;
+              if (TERN1(HAS_EXTRUDERS, i != E_AXIS))
+                sync_XYZE = true;
+              else {
+                TERN_(HAS_EXTRUDERS, sync_E = true);
+              }
               current_position[i] = v;                                // ...set Current Position directly (like Marlin 1.0)
             #endif
           }
@@ -111,8 +124,10 @@ void GcodeSuite::G92() {
       coordinate_system[active_coordinate_system] = position_shift;
   #endif
 
-  if   (sync_XYZE) sync_plan_position();
-  else if (sync_E) sync_plan_position_e();
+  if (sync_XYZE) sync_plan_position();
+  #if HAS_EXTRUDERS
+    else if (sync_E) sync_plan_position_e();
+  #endif
 
   IF_DISABLED(DIRECT_STEPPING, report_current_position());
 }

Marlin/src/gcode/geometry/M206_M428.cpp

@@ -31,7 +31,16 @@
 #include "../../MarlinCore.h"
 
 void M206_report() {
-  SERIAL_ECHOLNPAIR_P(PSTR("M206 X"), home_offset.x, SP_Y_STR, home_offset.y, SP_Z_STR, home_offset.z);
+  SERIAL_ECHOLNPAIR_P(
+    LIST_N(DOUBLE(LINEAR_AXES),
+      PSTR("M206 X"), home_offset.x,
+      SP_Y_STR, home_offset.y,
+      SP_Z_STR, home_offset.z,
+      SP_I_STR, home_offset.i,
+      SP_J_STR, home_offset.j,
+      SP_K_STR, home_offset.k,
+    )
+  );
 }
 
 /**
@@ -51,7 +60,7 @@ void GcodeSuite::M206() {
     if (parser.seen('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi
   #endif
 
-  if (!parser.seen("XYZ"))
+  if (!parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", "I", "J", "K")))
     M206_report();
   else
     report_current_position();

Marlin/src/gcode/host/M114.cpp

@@ -125,6 +125,15 @@
       #if AXIS_IS_L64XX(Z4)
         REPORT_ABSOLUTE_POS(Z4);
       #endif
+      #if AXIS_IS_L64XX(I)
+        REPORT_ABSOLUTE_POS(I);
+      #endif
+      #if AXIS_IS_L64XX(J)
+        REPORT_ABSOLUTE_POS(J);
+      #endif
+      #if AXIS_IS_L64XX(K)
+        REPORT_ABSOLUTE_POS(K);
+      #endif
       #if AXIS_IS_L64XX(E0)
         REPORT_ABSOLUTE_POS(E0);
       #endif
@@ -170,7 +179,13 @@
 
     SERIAL_ECHOPGM("FromStp:");
     get_cartesian_from_steppers();  // writes 'cartes' (with forward kinematics)
-    xyze_pos_t from_steppers = { cartes.x, cartes.y, cartes.z, planner.get_axis_position_mm(E_AXIS) };
+    xyze_pos_t from_steppers = LOGICAL_AXIS_ARRAY(
+      planner.get_axis_position_mm(E_AXIS),
+      cartes.x, cartes.y, cartes.z,
+      planner.get_axis_position_mm(I_AXIS),
+      planner.get_axis_position_mm(J_AXIS),
+      planner.get_axis_position_mm(K_AXIS)
+    );
     report_all_axis_pos(from_steppers);
 
     const xyze_float_t diff = from_steppers - leveled;

Marlin/src/gcode/host/M115.cpp

@@ -119,6 +119,9 @@ void GcodeSuite::M115() {
     // EMERGENCY_PARSER (M108, M112, M410, M876)
     cap_line(PSTR("EMERGENCY_PARSER"), ENABLED(EMERGENCY_PARSER));
 
+    // HOST ACTION COMMANDS (paused, resume, resumed, cancel, etc.)
+    cap_line(PSTR("HOST_ACTION_COMMANDS"), ENABLED(HOST_ACTION_COMMANDS));
+
     // PROMPT SUPPORT (M876)
     cap_line(PSTR("PROMPT_SUPPORT"), ENABLED(HOST_PROMPT_SUPPORT));
 

Marlin/src/gcode/lcd/M117.cpp

@@ -20,6 +20,10 @@
  *
  */
 
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_STATUS_MESSAGE
+
 #include "../gcode.h"
 #include "../../lcd/marlinui.h"
 
@@ -34,3 +38,5 @@ void GcodeSuite::M117() {
     ui.reset_status();
 
 }
+
+#endif // HAS_STATUS_MESSAGE

Marlin/src/gcode/motion/G0_G1.cpp

@@ -49,9 +49,14 @@ void GcodeSuite::G0_G1(TERN_(HAS_FAST_MOVES, const bool fast_move/*=false*/)) {
   if (IsRunning()
     #if ENABLED(NO_MOTION_BEFORE_HOMING)
       && !homing_needed_error(
-          (parser.seen_test('X') ? _BV(X_AXIS) : 0)
-        | (parser.seen_test('Y') ? _BV(Y_AXIS) : 0)
-        | (parser.seen_test('Z') ? _BV(Z_AXIS) : 0) )
+        LINEAR_AXIS_GANG(
+            (parser.seen_test('X') ? _BV(X_AXIS) : 0),
+          | (parser.seen_test('Y') ? _BV(Y_AXIS) : 0),
+          | (parser.seen_test('Z') ? _BV(Z_AXIS) : 0),
+          | (parser.seen_test(AXIS4_NAME) ? _BV(I_AXIS) : 0),
+          | (parser.seen_test(AXIS5_NAME) ? _BV(J_AXIS) : 0),
+          | (parser.seen_test(AXIS6_NAME) ? _BV(K_AXIS) : 0))
+      )
     #endif
   ) {
     TERN_(FULL_REPORT_TO_HOST_FEATURE, set_and_report_grblstate(M_RUNNING));
@@ -83,7 +88,9 @@ void GcodeSuite::G0_G1(TERN_(HAS_FAST_MOVES, const bool fast_move/*=false*/)) {
 
       if (MIN_AUTORETRACT <= MAX_AUTORETRACT) {
         // When M209 Autoretract is enabled, convert E-only moves to firmware retract/recover moves
-        if (fwretract.autoretract_enabled && parser.seen('E') && !parser.seen("XYZ")) {
+        if (fwretract.autoretract_enabled && parser.seen_test('E')
+          && !parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR))
+        ) {
           const float echange = destination.e - current_position.e;
           // Is this a retract or recover move?
           if (WITHIN(ABS(echange), MIN_AUTORETRACT, MAX_AUTORETRACT) && fwretract.retracted[active_extruder] == (echange > 0.0)) {

Marlin/src/gcode/motion/G2_G3.cpp

@@ -63,7 +63,7 @@ void plan_arc(
       case GcodeSuite::PLANE_ZX: p_axis = Z_AXIS; q_axis = X_AXIS; l_axis = Y_AXIS; break;
     }
   #else
-    constexpr AxisEnum p_axis = X_AXIS, q_axis = Y_AXIS, l_axis = Z_AXIS;
+    constexpr AxisEnum p_axis = X_AXIS, q_axis = Y_AXIS OPTARG(HAS_Z_AXIS, l_axis = Z_AXIS);
   #endif
 
   // Radius vector from center to current location
@@ -73,8 +73,8 @@ void plan_arc(
               center_P = current_position[p_axis] - rvec.a,
               center_Q = current_position[q_axis] - rvec.b,
               rt_X = cart[p_axis] - center_P,
-              rt_Y = cart[q_axis] - center_Q,
-              start_L = current_position[l_axis];
+              rt_Y = cart[q_axis] - center_Q
+              OPTARG(HAS_Z_AXIS, start_L = current_position[l_axis]);
 
   #ifdef MIN_ARC_SEGMENTS
     uint16_t min_segments = MIN_ARC_SEGMENTS;
@@ -109,27 +109,37 @@ void plan_arc(
     #endif
   }
 
-  float linear_travel = cart[l_axis] - start_L,
-        extruder_travel = cart.e - current_position.e;
+  #if HAS_Z_AXIS
+    float linear_travel = cart[l_axis] - start_L;
+  #endif
+  #if HAS_EXTRUDERS
+    float extruder_travel = cart.e - current_position.e;
+  #endif
 
   // If circling around...
   if (ENABLED(ARC_P_CIRCLES) && circles) {
     const float total_angular = angular_travel + circles * RADIANS(360),  // Total rotation with all circles and remainder
-              part_per_circle = RADIANS(360) / total_angular,             // Each circle's part of the total
-                 l_per_circle = linear_travel * part_per_circle,          // L movement per circle
-                 e_per_circle = extruder_travel * part_per_circle;        // E movement per circle
+              part_per_circle = RADIANS(360) / total_angular;             // Each circle's part of the total
+
+    #if HAS_Z_AXIS
+      const float l_per_circle = linear_travel * part_per_circle;         // L movement per circle
+    #endif
+    #if HAS_EXTRUDERS
+      const float e_per_circle = extruder_travel * part_per_circle;       // E movement per circle
+    #endif
+
     xyze_pos_t temp_position = current_position;                          // for plan_arc to compare to current_position
     for (uint16_t n = circles; n--;) {
-      temp_position.e += e_per_circle;                                    // Destination E axis
-      temp_position[l_axis] += l_per_circle;                              // Destination L axis
+      TERN_(HAS_EXTRUDERS, temp_position.e += e_per_circle);              // Destination E axis
+      TERN_(HAS_Z_AXIS, temp_position[l_axis] += l_per_circle);           // Destination L axis
       plan_arc(temp_position, offset, clockwise, 0);                      // Plan a single whole circle
     }
-    linear_travel = cart[l_axis] - current_position[l_axis];
-    extruder_travel = cart.e - current_position.e;
+    TERN_(HAS_Z_AXIS, linear_travel = cart[l_axis] - current_position[l_axis]);
+    TERN_(HAS_EXTRUDERS, extruder_travel = cart.e - current_position.e);
   }
 
   const float flat_mm = radius * angular_travel,
-              mm_of_travel = linear_travel ? HYPOT(flat_mm, linear_travel) : ABS(flat_mm);
+              mm_of_travel = TERN_(HAS_Z_AXIS, linear_travel ? HYPOT(flat_mm, linear_travel) :) ABS(flat_mm);
   if (mm_of_travel < 0.001f) return;
 
   const feedRate_t scaled_fr_mm_s = MMS_SCALED(feedrate_mm_s);
@@ -178,17 +188,22 @@ void plan_arc(
   // Vector rotation matrix values
   xyze_pos_t raw;
   const float theta_per_segment = angular_travel / segments,
-              linear_per_segment = linear_travel / segments,
-              extruder_per_segment = extruder_travel / segments,
               sq_theta_per_segment = sq(theta_per_segment),
               sin_T = theta_per_segment - sq_theta_per_segment * theta_per_segment / 6,
               cos_T = 1 - 0.5f * sq_theta_per_segment; // Small angle approximation
 
+  #if HAS_Z_AXIS && DISABLED(AUTO_BED_LEVELING_UBL)
+    const float linear_per_segment = linear_travel / segments;
+  #endif
+  #if HAS_EXTRUDERS
+    const float extruder_per_segment = extruder_travel / segments;
+  #endif
+
   // Initialize the linear axis
-  raw[l_axis] = current_position[l_axis];
+  TERN_(HAS_Z_AXIS, raw[l_axis] = current_position[l_axis]);
 
   // Initialize the extruder axis
-  raw.e = current_position.e;
+  TERN_(HAS_EXTRUDERS, raw.e = current_position.e);
 
   #if ENABLED(SCARA_FEEDRATE_SCALING)
     const float inv_duration = scaled_fr_mm_s / seg_length;
@@ -234,13 +249,11 @@ void plan_arc(
     // Update raw location
     raw[p_axis] = center_P + rvec.a;
     raw[q_axis] = center_Q + rvec.b;
-    #if ENABLED(AUTO_BED_LEVELING_UBL)
-      raw[l_axis] = start_L;
-      UNUSED(linear_per_segment);
-    #else
-      raw[l_axis] += linear_per_segment;
+    #if HAS_Z_AXIS
+      raw[l_axis] = TERN(AUTO_BED_LEVELING_UBL, start_L, raw[l_axis] + linear_per_segment);
     #endif
-    raw.e += extruder_per_segment;
+
+    TERN_(HAS_EXTRUDERS, raw.e += extruder_per_segment);
 
     apply_motion_limits(raw);
 
@@ -249,15 +262,13 @@ void plan_arc(
     #endif
 
     if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0
-      #if ENABLED(SCARA_FEEDRATE_SCALING)
-        , inv_duration
-      #endif
+      OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
     )) break;
   }
 
   // Ensure last segment arrives at target location.
   raw = cart;
-  TERN_(AUTO_BED_LEVELING_UBL, raw[l_axis] = start_L);
+  TERN_(AUTO_BED_LEVELING_UBL, TERN_(HAS_Z_AXIS, raw[l_axis] = start_L));
 
   apply_motion_limits(raw);
 
@@ -266,12 +277,10 @@ void plan_arc(
   #endif
 
   planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0
-    #if ENABLED(SCARA_FEEDRATE_SCALING)
-      , inv_duration
-    #endif
+    OPTARG(SCARA_FEEDRATE_SCALING, inv_duration)
   );
 
-  TERN_(AUTO_BED_LEVELING_UBL, raw[l_axis] = start_L);
+  TERN_(AUTO_BED_LEVELING_UBL, TERN_(HAS_Z_AXIS, raw[l_axis] = start_L));
   current_position = raw;
 
 } // plan_arc

Marlin/src/gcode/motion/M290.cpp

@@ -87,7 +87,7 @@ void GcodeSuite::M290() {
     }
   #endif
 
-  if (!parser.seen("XYZ") || parser.seen('R')) {
+  if (!parser.seen(LINEAR_AXIS_GANG("X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR)) || parser.seen('R')) {
     SERIAL_ECHO_START();
 
     #if ENABLED(BABYSTEP_ZPROBE_OFFSET)

Marlin/src/gcode/parser.cpp

@@ -248,7 +248,8 @@ void GCodeParser::parse(char *p) {
         case 'R': if (!WITHIN(motion_mode_codenum, 2, 3)) return;
       #endif
 
-      case 'X' ... 'Z': case 'E' ... 'F':
+      LOGICAL_AXIS_GANG(case 'E':, case 'X':, case 'Y':, case 'Z':, case AXIS4_NAME:, case AXIS5_NAME:, case AXIS6_NAME:)
+      case 'F':
         if (motion_mode_codenum < 0) return;
         command_letter = 'G';
         codenum = motion_mode_codenum;

Marlin/src/gcode/parser.h

@@ -226,7 +226,7 @@ public:
 
   // Seen any axis parameter
   static inline bool seen_axis() {
-    return seen("XYZE");
+    return seen(LOGICAL_AXIS_GANG("E", "X", "Y", "Z", AXIS4_STR, AXIS5_STR, AXIS6_STR));
   }
 
   #if ENABLED(GCODE_QUOTED_STRINGS)

Marlin/src/gcode/queue.cpp

@@ -84,9 +84,7 @@ char GCodeQueue::injected_commands[64]; // = { 0 }
 
 
 void GCodeQueue::RingBuffer::commit_command(bool skip_ok
-  #if HAS_MULTI_SERIAL
-    , serial_index_t serial_ind/*=-1*/
-  #endif
+  OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/)
 ) {
   commands[index_w].skip_ok = skip_ok;
   TERN_(HAS_MULTI_SERIAL, commands[index_w].port = serial_ind);
@@ -100,9 +98,7 @@ void GCodeQueue::RingBuffer::commit_command(bool skip_ok
  * Return false for a full buffer, or if the 'command' is a comment.
  */
 bool GCodeQueue::RingBuffer::enqueue(const char *cmd, bool skip_ok/*=true*/
-  #if HAS_MULTI_SERIAL
-    , serial_index_t serial_ind/*=-1*/
-  #endif
+  OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind/*=-1*/)
 ) {
   if (*cmd == ';' || length >= BUFSIZE) return false;
   strcpy(commands[index_w].buffer, cmd);

Marlin/src/gcode/queue.h

@@ -80,15 +80,11 @@ public:
     void advance_pos(uint8_t &p, const int inc) { if (++p >= BUFSIZE) p = 0; length += inc; }
 
     void commit_command(bool skip_ok
-      #if HAS_MULTI_SERIAL
-        , serial_index_t serial_ind = serial_index_t()
-      #endif
+      OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind = serial_index_t())
     );
 
     bool enqueue(const char *cmd, bool skip_ok = true
-      #if HAS_MULTI_SERIAL
-        , serial_index_t serial_ind = serial_index_t()
-      #endif
+      OPTARG(HAS_MULTI_SERIAL, serial_index_t serial_ind = serial_index_t())
     );
 
     void ok_to_send();

Marlin/src/gcode/temp/M106_M107.cpp

@@ -83,6 +83,8 @@ void GcodeSuite::M106() {
     if (!got_preset && parser.seenval('S'))
       speed = parser.value_ushort();
 
+    TERN_(FOAMCUTTER_XYUV, speed *= 2.55); // Get command in % of max heat
+
     // Set speed, with constraint
     thermalManager.set_fan_speed(pfan, speed);
 

Marlin/src/gcode/temp/M140_M190.cpp

@@ -83,10 +83,11 @@ void GcodeSuite::M140_M190(const bool isM190) {
 
   thermalManager.setTargetBed(temp);
 
-  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(true, false));
-
   ui.set_status_P(thermalManager.isHeatingBed() ? GET_TEXT(MSG_BED_HEATING) : GET_TEXT(MSG_BED_COOLING));
 
+  // with PRINTJOB_TIMER_AUTOSTART, M190 can start the timer, and M140 can stop it
+  TERN_(PRINTJOB_TIMER_AUTOSTART, thermalManager.auto_job_check_timer(isM190, !isM190));
+
   if (isM190)
     thermalManager.wait_for_bed(no_wait_for_cooling);
 }

Marlin/src/inc/Conditionals_LCD.h

@@ -517,7 +517,7 @@
     #define HAS_PRUSA_MMU2 1
     #define HAS_PRUSA_MMU2S 1
   #endif
-  #if MMU_MODEL == EXTENDABLE_EMU_MMU2 || MMU_MODEL == EXTENDABLE_EMU_MMU2S
+  #if MMU_MODEL >= EXTENDABLE_EMU_MMU2
     #define HAS_EXTENDABLE_MMU 1
   #endif
 #endif
@@ -537,12 +537,12 @@
  *  E_STEPPERS   - Number of actual E stepper motors
  *  E_MANUAL     - Number of E steppers for LCD move options
  */
-
 #if EXTRUDERS
   #define HAS_EXTRUDERS 1
   #if EXTRUDERS > 1
     #define HAS_MULTI_EXTRUDER 1
   #endif
+  #define E_AXIS_N(E) AxisEnum(E_AXIS + E_INDEX_N(E))
 #else
   #undef EXTRUDERS
   #define EXTRUDERS 0
@@ -551,6 +551,7 @@
   #undef SWITCHING_NOZZLE
   #undef MIXING_EXTRUDER
   #undef HOTEND_IDLE_TIMEOUT
+  #undef DISABLE_E
 #endif
 
 #if ENABLED(SWITCHING_EXTRUDER)   // One stepper for every two EXTRUDERS
@@ -604,6 +605,56 @@
   #define E_MANUAL EXTRUDERS
 #endif
 
+/**
+ * Number of Linear Axes (e.g., XYZ)
+ * All the logical axes except for the tool (E) axis
+ */
+#ifndef LINEAR_AXES
+  #define LINEAR_AXES XYZ
+#endif
+#if LINEAR_AXES >= XY
+  #define HAS_Y_AXIS 1
+  #if LINEAR_AXES >= XYZ
+    #define HAS_Z_AXIS 1
+  #endif
+#endif
+
+/**
+ * Number of Logical Axes (e.g., XYZE)
+ * All the logical axes that can be commanded directly by G-code.
+ * Delta maps stepper-specific values to ABC steppers.
+ */
+#if HAS_EXTRUDERS
+  #define LOGICAL_AXES INCREMENT(LINEAR_AXES)
+#else
+  #define LOGICAL_AXES LINEAR_AXES
+#endif
+
+/**
+ * DISTINCT_E_FACTORS is set to give extruders (some) individual settings.
+ *
+ * DISTINCT_AXES is the number of distinct addressable axes (not steppers).
+ *  Includes all linear axes plus all distinguished extruders.
+ *  The default behavior is to treat all extruders as a single E axis
+ *  with shared motion and temperature settings.
+ *
+ * DISTINCT_E is the number of distinguished extruders. By default this
+ *  well be 1 which indicates all extruders share the same settings.
+ *
+ * E_INDEX_N(E) should be used to get the E index of any item that might be
+ *  distinguished.
+ */
+#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
+  #define DISTINCT_AXES (LINEAR_AXES + E_STEPPERS)
+  #define DISTINCT_E E_STEPPERS
+  #define E_INDEX_N(E) (E)
+#else
+  #undef DISTINCT_E_FACTORS
+  #define DISTINCT_AXES LOGICAL_AXES
+  #define DISTINCT_E 1
+  #define E_INDEX_N(E) 0
+#endif
+
 #if HOTENDS
   #define HAS_HOTEND 1
   #ifndef HOTEND_OVERSHOOT
@@ -624,10 +675,6 @@
 #define ARRAY_BY_HOTENDS(V...) ARRAY_N(HOTENDS, V)
 #define ARRAY_BY_HOTENDS1(v1) ARRAY_N_1(HOTENDS, v1)
 
-#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
-  #define DO_SWITCH_EXTRUDER 1
-#endif
-
 /**
  * Default hotend offsets, if not defined
  */
@@ -653,40 +700,11 @@
   #undef SINGLENOZZLE_STANDBY_FAN
 #endif
 
-/**
- * Number of Linear Axes (e.g., XYZ)
- * All the logical axes except for the tool (E) axis
- */
-#ifndef LINEAR_AXES
-  #define LINEAR_AXES XYZ
+// Switching extruder has its own servo?
+#if ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR)
+  #define DO_SWITCH_EXTRUDER 1
 #endif
 
-/**
- * Number of Logical Axes (e.g., XYZE)
- * All the logical axes that can be commanded directly by G-code.
- * Delta maps stepper-specific values to ABC steppers.
- */
-#if HAS_EXTRUDERS
-  #define LOGICAL_AXES INCREMENT(LINEAR_AXES)
-#else
-  #define LOGICAL_AXES LINEAR_AXES
-#endif
-
-/**
- * DISTINCT_E_FACTORS affects whether Extruders use different settings
- */
-#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
-  #define DISTINCT_E E_STEPPERS
-  #define DISTINCT_AXES (LINEAR_AXES + E_STEPPERS)
-  #define E_INDEX_N(E) (E)
-#else
-  #undef DISTINCT_E_FACTORS
-  #define DISTINCT_E 1
-  #define DISTINCT_AXES LOGICAL_AXES
-  #define E_INDEX_N(E) 0
-#endif
-#define E_AXIS_N(E) AxisEnum(E_AXIS + E_INDEX_N(E))
-
 /**
  * The BLTouch Probe emulates a servo probe
  * and uses "special" angles for its state.
@@ -726,6 +744,9 @@
   #define HAS_BED_PROBE 1
 #endif
 
+/**
+ * Fill in undefined Filament Sensor options
+ */
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
   #if NUM_RUNOUT_SENSORS >= 1
     #ifndef FIL_RUNOUT1_STATE
@@ -833,7 +854,25 @@
 #elif Z_HOME_DIR < 0
   #define Z_HOME_TO_MIN 1
 #endif
+#if I_HOME_DIR > 0
+  #define I_HOME_TO_MAX 1
+#elif I_HOME_DIR < 0
+  #define I_HOME_TO_MIN 1
+#endif
+#if J_HOME_DIR > 0
+  #define J_HOME_TO_MAX 1
+#elif J_HOME_DIR < 0
+  #define J_HOME_TO_MIN 1
+#endif
+#if K_HOME_DIR > 0
+  #define K_HOME_TO_MAX 1
+#elif K_HOME_DIR < 0
+  #define K_HOME_TO_MIN 1
+#endif
 
+/**
+ * Conditionals based on the type of Bed Probe
+ */
 #if HAS_BED_PROBE
   #if DISABLED(NOZZLE_AS_PROBE)
     #define HAS_PROBE_XY_OFFSET 1
@@ -868,7 +907,7 @@
 #endif
 
 /**
- * Set granular options based on the specific type of leveling
+ * Conditionals based on the type of Bed Leveling
  */
 #if ENABLED(AUTO_BED_LEVELING_UBL)
   #undef LCD_BED_LEVELING
@@ -1088,13 +1127,22 @@
 #ifndef INVERT_X_DIR
   #define INVERT_X_DIR false
 #endif
-#ifndef INVERT_Y_DIR
+#if HAS_Y_AXIS && !defined(INVERT_Y_DIR)
   #define INVERT_Y_DIR false
 #endif
-#ifndef INVERT_Z_DIR
+#if HAS_Z_AXIS && !defined(INVERT_Z_DIR)
   #define INVERT_Z_DIR false
 #endif
-#ifndef INVERT_E_DIR
+#if LINEAR_AXES >= 4 && !defined(INVERT_I_DIR)
+  #define INVERT_I_DIR false
+#endif
+#if LINEAR_AXES >= 5 && !defined(INVERT_J_DIR)
+  #define INVERT_J_DIR false
+#endif
+#if LINEAR_AXES >= 6 && !defined(INVERT_K_DIR)
+  #define INVERT_K_DIR false
+#endif
+#if HAS_EXTRUDERS && !defined(INVERT_E_DIR)
   #define INVERT_E_DIR false
 #endif
 
@@ -1303,3 +1351,10 @@
 #else
   #define COORDINATE_OKAY(N,L,H) true
 #endif
+
+/**
+ * LED Backlight INDEX END
+ */
+#if defined(NEOPIXEL_BKGD_INDEX_FIRST) && !defined(NEOPIXEL_BKGD_INDEX_LAST)
+  #define NEOPIXEL_BKGD_INDEX_LAST NEOPIXEL_BKGD_INDEX_FIRST
+#endif

Marlin/src/inc/Conditionals_adv.h

@@ -26,6 +26,10 @@
  * Defines that depend on advanced configuration.
  */
 
+#ifndef AXIS_RELATIVE_MODES
+  #define AXIS_RELATIVE_MODES {}
+#endif
+
 #ifdef SWITCHING_NOZZLE_E1_SERVO_NR
   #define SWITCHING_NOZZLE_TWO_SERVOS 1
 #endif
@@ -103,6 +107,9 @@
   #undef THERMAL_PROTECTION_PERIOD
   #undef WATCH_TEMP_PERIOD
   #undef SHOW_TEMP_ADC_VALUES
+  #undef LCD_SHOW_E_TOTAL
+  #undef MANUAL_E_MOVES_RELATIVE
+  #undef STEALTHCHOP_E
 #endif
 
 #if TEMP_SENSOR_BED == 0
@@ -482,6 +489,37 @@
   #endif
 #endif
 
+// Remove unused STEALTHCHOP flags
+#if LINEAR_AXES < 6
+  #undef STEALTHCHOP_K
+  #undef CALIBRATION_MEASURE_KMIN
+  #undef CALIBRATION_MEASURE_KMAX
+  #if LINEAR_AXES < 5
+    #undef STEALTHCHOP_J
+    #undef CALIBRATION_MEASURE_JMIN
+    #undef CALIBRATION_MEASURE_JMAX
+    #if LINEAR_AXES < 4
+      #undef STEALTHCHOP_I
+      #undef CALIBRATION_MEASURE_IMIN
+      #undef CALIBRATION_MEASURE_IMAX
+      #if LINEAR_AXES < 3
+        #undef Z_IDLE_HEIGHT
+        #undef STEALTHCHOP_Z
+        #undef Z_PROBE_SLED
+        #undef Z_SAFE_HOMING
+        #undef HOME_Z_FIRST
+        #undef HOMING_Z_WITH_PROBE
+        #undef ENABLE_LEVELING_FADE_HEIGHT
+        #undef NUM_Z_STEPPER_DRIVERS
+        #undef CNC_WORKSPACE_PLANES
+        #if LINEAR_AXES < 2
+          #undef STEALTHCHOP_Y
+        #endif
+      #endif
+    #endif
+  #endif
+#endif
+
 //
 // SD Card connection methods
 // Defined here so pins and sanity checks can use them

Marlin/src/inc/Conditionals_post.h

@@ -78,17 +78,49 @@
 /**
  * Axis lengths and center
  */
+#ifndef AXIS4_NAME
+  #define AXIS4_NAME 'A'
+#endif
+#ifndef AXIS5_NAME
+  #define AXIS5_NAME 'B'
+#endif
+#ifndef AXIS6_NAME
+  #define AXIS6_NAME 'C'
+#endif
+
 #define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS))
-#define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
-#define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
+#if HAS_Y_AXIS
+  #define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
+#endif
+#if HAS_Z_AXIS
+  #define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
+#endif
+#if LINEAR_AXES >= 4
+  #define I_MAX_LENGTH (I_MAX_POS - (I_MIN_POS))
+#endif
+#if LINEAR_AXES >= 5
+  #define J_MAX_LENGTH (J_MAX_POS - (J_MIN_POS))
+#endif
+#if LINEAR_AXES >= 6
+  #define K_MAX_LENGTH (K_MAX_POS - (K_MIN_POS))
+#endif
 
 // Defined only if the sanity-check is bypassed
 #ifndef X_BED_SIZE
   #define X_BED_SIZE X_MAX_LENGTH
 #endif
-#ifndef Y_BED_SIZE
+#if HAS_Y_AXIS && !defined(Y_BED_SIZE)
   #define Y_BED_SIZE Y_MAX_LENGTH
 #endif
+#if LINEAR_AXES >= 4 && !defined(I_BED_SIZE)
+  #define I_BED_SIZE I_MAX_LENGTH
+#endif
+#if LINEAR_AXES >= 5 && !defined(J_BED_SIZE)
+  #define J_BED_SIZE J_MAX_LENGTH
+#endif
+#if LINEAR_AXES >= 6 && !defined(K_BED_SIZE)
+  #define K_BED_SIZE K_MAX_LENGTH
+#endif
 
 // Require 0,0 bed center for Delta and SCARA
 #if IS_KINEMATIC
@@ -97,16 +129,53 @@
 
 // Define center values for future use
 #define _X_HALF_BED ((X_BED_SIZE) / 2)
-#define _Y_HALF_BED ((Y_BED_SIZE) / 2)
+#if HAS_Y_AXIS
+  #define _Y_HALF_BED ((Y_BED_SIZE) / 2)
+#endif
+#if LINEAR_AXES >= 4
+  #define _I_HALF_IMAX ((I_BED_SIZE) / 2)
+#endif
+#if LINEAR_AXES >= 5
+  #define _J_HALF_JMAX ((J_BED_SIZE) / 2)
+#endif
+#if LINEAR_AXES >= 6
+  #define _K_HALF_KMAX ((K_BED_SIZE) / 2)
+#endif
+
 #define X_CENTER TERN(BED_CENTER_AT_0_0, 0, _X_HALF_BED)
-#define Y_CENTER TERN(BED_CENTER_AT_0_0, 0, _Y_HALF_BED)
-#define XY_CENTER { X_CENTER, Y_CENTER }
+#if HAS_Y_AXIS
+  #define Y_CENTER TERN(BED_CENTER_AT_0_0, 0, _Y_HALF_BED)
+  #define XY_CENTER { X_CENTER, Y_CENTER }
+#endif
+#if LINEAR_AXES >= 4
+  #define I_CENTER TERN(BED_CENTER_AT_0_0, 0, _I_HALF_BED)
+#endif
+#if LINEAR_AXES >= 5
+  #define J_CENTER TERN(BED_CENTER_AT_0_0, 0, _J_HALF_BED)
+#endif
+#if LINEAR_AXES >= 6
+  #define K_CENTER TERN(BED_CENTER_AT_0_0, 0, _K_HALF_BED)
+#endif
 
 // Get the linear boundaries of the bed
 #define X_MIN_BED (X_CENTER - _X_HALF_BED)
 #define X_MAX_BED (X_MIN_BED + X_BED_SIZE)
-#define Y_MIN_BED (Y_CENTER - _Y_HALF_BED)
-#define Y_MAX_BED (Y_MIN_BED + Y_BED_SIZE)
+#if HAS_Y_AXIS
+  #define Y_MIN_BED (Y_CENTER - _Y_HALF_BED)
+  #define Y_MAX_BED (Y_MIN_BED + Y_BED_SIZE)
+#endif
+#if LINEAR_AXES >= 4
+  #define I_MINIM (I_CENTER - _I_HALF_BED_SIZE)
+  #define I_MAXIM (I_MINIM + I_BED_SIZE)
+#endif
+#if LINEAR_AXES >= 5
+  #define J_MINIM (J_CENTER - _J_HALF_BED_SIZE)
+  #define J_MAXIM (J_MINIM + J_BED_SIZE)
+#endif
+#if LINEAR_AXES >= 6
+  #define K_MINIM (K_CENTER - _K_HALF_BED_SIZE)
+  #define K_MAXIM (K_MINIM + K_BED_SIZE)
+#endif
 
 /**
  * Dual X Carriage
@@ -163,14 +232,16 @@
   #endif
 #endif
 
-#ifdef MANUAL_Y_HOME_POS
-  #define Y_HOME_POS MANUAL_Y_HOME_POS
-#else
-  #define Y_END_POS TERN(Y_HOME_TO_MIN, Y_MIN_POS, Y_MAX_POS)
-  #if ENABLED(BED_CENTER_AT_0_0)
-    #define Y_HOME_POS TERN(DELTA, 0, Y_END_POS)
+#if HAS_Y_AXIS
+  #ifdef MANUAL_Y_HOME_POS
+    #define Y_HOME_POS MANUAL_Y_HOME_POS
   #else
-    #define Y_HOME_POS TERN(DELTA, Y_MIN_POS + (Y_BED_SIZE) * 0.5, Y_END_POS)
+    #define Y_END_POS TERN(Y_HOME_TO_MIN, Y_MIN_POS, Y_MAX_POS)
+    #if ENABLED(BED_CENTER_AT_0_0)
+      #define Y_HOME_POS TERN(DELTA, 0, Y_END_POS)
+    #else
+      #define Y_HOME_POS TERN(DELTA, Y_MIN_POS + (Y_BED_SIZE) * 0.5, Y_END_POS)
+    #endif
   #endif
 #endif
 
@@ -180,6 +251,28 @@
   #define Z_HOME_POS TERN(Z_HOME_TO_MIN, Z_MIN_POS, Z_MAX_POS)
 #endif
 
+#if LINEAR_AXES >= 4
+  #ifdef MANUAL_I_HOME_POS
+    #define I_HOME_POS MANUAL_I_HOME_POS
+  #else
+    #define I_HOME_POS TERN(I_HOME_TO_MIN, I_MIN_POS, I_MAX_POS)
+  #endif
+#endif
+#if LINEAR_AXES >= 5
+  #ifdef MANUAL_J_HOME_POS
+    #define J_HOME_POS MANUAL_J_HOME_POS
+  #else
+    #define J_HOME_POS TERN(J_HOME_TO_MIN, J_MIN_POS, J_MAX_POS)
+  #endif
+#endif
+#if LINEAR_AXES >= 6
+  #ifdef MANUAL_K_HOME_POS
+    #define K_HOME_POS MANUAL_K_HOME_POS
+  #else
+    #define K_HOME_POS TERN(K_HOME_TO_MIN, K_MIN_POS, K_MAX_POS)
+  #endif
+#endif
+
 /**
  * If DELTA_HEIGHT isn't defined use the old setting
  */
@@ -374,15 +467,24 @@
 #ifndef DISABLE_INACTIVE_X
   #define DISABLE_INACTIVE_X DISABLE_X
 #endif
-#ifndef DISABLE_INACTIVE_Y
+#if HAS_Y_AXIS && !defined(DISABLE_INACTIVE_Y)
   #define DISABLE_INACTIVE_Y DISABLE_Y
 #endif
-#ifndef DISABLE_INACTIVE_Z
+#if HAS_Z_AXIS && !defined(DISABLE_INACTIVE_Z)
   #define DISABLE_INACTIVE_Z DISABLE_Z
 #endif
 #ifndef DISABLE_INACTIVE_E
   #define DISABLE_INACTIVE_E DISABLE_E
 #endif
+#if LINEAR_AXES >= 4 && !defined(DISABLE_INACTIVE_I)
+  #define DISABLE_INACTIVE_I DISABLE_I
+#endif
+#if LINEAR_AXES >= 5 && !defined(DISABLE_INACTIVE_J)
+  #define DISABLE_INACTIVE_J DISABLE_J
+#endif
+#if LINEAR_AXES >= 6 && !defined(DISABLE_INACTIVE_K)
+  #define DISABLE_INACTIVE_K DISABLE_K
+#endif
 
 /**
  * Power Supply
@@ -1418,6 +1520,15 @@
   #if ENABLED(USE_ZMAX_PLUG)
     #define ENDSTOPPULLUP_ZMAX
   #endif
+  #if ENABLED(USE_IMAX_PLUG)
+    #define ENDSTOPPULLUP_IMAX
+  #endif
+  #if ENABLED(USE_JMAX_PLUG)
+    #define ENDSTOPPULLUP_JMAX
+  #endif
+  #if ENABLED(USE_KMAX_PLUG)
+    #define ENDSTOPPULLUP_KMAX
+  #endif
   #if ENABLED(USE_XMIN_PLUG)
     #define ENDSTOPPULLUP_XMIN
   #endif
@@ -1427,6 +1538,15 @@
   #if ENABLED(USE_ZMIN_PLUG)
     #define ENDSTOPPULLUP_ZMIN
   #endif
+  #if ENABLED(USE_IMIN_PLUG)
+    #define ENDSTOPPULLUP_IMIN
+  #endif
+  #if ENABLED(USE_JMIN_PLUG)
+    #define ENDSTOPPULLUP_JMIN
+  #endif
+  #if ENABLED(USE_KMIN_PLUG)
+    #define ENDSTOPPULLUP_KMIN
+  #endif
 #endif
 
 /**
@@ -1484,219 +1604,278 @@
   #define HAS_X2_MS_PINS 1
 #endif
 
-#if PIN_EXISTS(Y_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y))
-  #define HAS_Y_ENABLE 1
-#endif
-#if PIN_EXISTS(Y_DIR)
-  #define HAS_Y_DIR 1
-#endif
-#if PIN_EXISTS(Y_STEP)
-  #define HAS_Y_STEP 1
-#endif
-#if PIN_EXISTS(Y_MS1)
-  #define HAS_Y_MS_PINS 1
+#if HAS_Y_AXIS
+  #if PIN_EXISTS(Y_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y))
+    #define HAS_Y_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Y_DIR)
+    #define HAS_Y_DIR 1
+  #endif
+  #if PIN_EXISTS(Y_STEP)
+    #define HAS_Y_STEP 1
+  #endif
+  #if PIN_EXISTS(Y_MS1)
+    #define HAS_Y_MS_PINS 1
+  #endif
+
+  #if PIN_EXISTS(Y2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2))
+    #define HAS_Y2_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Y2_DIR)
+    #define HAS_Y2_DIR 1
+  #endif
+  #if PIN_EXISTS(Y2_STEP)
+    #define HAS_Y2_STEP 1
+  #endif
+  #if PIN_EXISTS(Y2_MS1)
+    #define HAS_Y2_MS_PINS 1
+  #endif
 #endif
 
-#if PIN_EXISTS(Y2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Y2))
-  #define HAS_Y2_ENABLE 1
-#endif
-#if PIN_EXISTS(Y2_DIR)
-  #define HAS_Y2_DIR 1
-#endif
-#if PIN_EXISTS(Y2_STEP)
-  #define HAS_Y2_STEP 1
-#endif
-#if PIN_EXISTS(Y2_MS1)
-  #define HAS_Y2_MS_PINS 1
+#if HAS_Z_AXIS
+  #if PIN_EXISTS(Z_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z))
+    #define HAS_Z_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Z_DIR)
+    #define HAS_Z_DIR 1
+  #endif
+  #if PIN_EXISTS(Z_STEP)
+    #define HAS_Z_STEP 1
+  #endif
+  #if PIN_EXISTS(Z_MS1)
+    #define HAS_Z_MS_PINS 1
+  #endif
 #endif
 
-#if PIN_EXISTS(Z_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z))
-  #define HAS_Z_ENABLE 1
-#endif
-#if PIN_EXISTS(Z_DIR)
-  #define HAS_Z_DIR 1
-#endif
-#if PIN_EXISTS(Z_STEP)
-  #define HAS_Z_STEP 1
-#endif
-#if PIN_EXISTS(Z_MS1)
-  #define HAS_Z_MS_PINS 1
+#if NUM_Z_STEPPER_DRIVERS >= 2
+  #if PIN_EXISTS(Z2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2))
+    #define HAS_Z2_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Z2_DIR)
+    #define HAS_Z2_DIR 1
+  #endif
+  #if PIN_EXISTS(Z2_STEP)
+    #define HAS_Z2_STEP 1
+  #endif
+  #if PIN_EXISTS(Z2_MS1)
+    #define HAS_Z2_MS_PINS 1
+  #endif
 #endif
 
-#if PIN_EXISTS(Z2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z2))
-  #define HAS_Z2_ENABLE 1
-#endif
-#if PIN_EXISTS(Z2_DIR)
-  #define HAS_Z2_DIR 1
-#endif
-#if PIN_EXISTS(Z2_STEP)
-  #define HAS_Z2_STEP 1
-#endif
-#if PIN_EXISTS(Z2_MS1)
-  #define HAS_Z2_MS_PINS 1
+#if NUM_Z_STEPPER_DRIVERS >= 3
+  #if PIN_EXISTS(Z3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3))
+    #define HAS_Z3_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Z3_DIR)
+    #define HAS_Z3_DIR 1
+  #endif
+  #if PIN_EXISTS(Z3_STEP)
+    #define HAS_Z3_STEP 1
+  #endif
+  #if PIN_EXISTS(Z3_MS1)
+    #define HAS_Z3_MS_PINS 1
+  #endif
 #endif
 
-#if PIN_EXISTS(Z3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z3))
-  #define HAS_Z3_ENABLE 1
-#endif
-#if PIN_EXISTS(Z3_DIR)
-  #define HAS_Z3_DIR 1
-#endif
-#if PIN_EXISTS(Z3_STEP)
-  #define HAS_Z3_STEP 1
-#endif
-#if PIN_EXISTS(Z3_MS1)
-  #define HAS_Z3_MS_PINS 1
+#if NUM_Z_STEPPER_DRIVERS >= 4
+  #if PIN_EXISTS(Z4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z4))
+    #define HAS_Z4_ENABLE 1
+  #endif
+  #if PIN_EXISTS(Z4_DIR)
+    #define HAS_Z4_DIR 1
+  #endif
+  #if PIN_EXISTS(Z4_STEP)
+    #define HAS_Z4_STEP 1
+  #endif
+  #if PIN_EXISTS(Z4_MS1)
+    #define HAS_Z4_MS_PINS 1
+  #endif
 #endif
 
-#if PIN_EXISTS(Z4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(Z4))
-  #define HAS_Z4_ENABLE 1
+#if LINEAR_AXES >= 4
+  #if PIN_EXISTS(I_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(I))
+    #define HAS_I_ENABLE 1
+  #endif
+  #if PIN_EXISTS(I_DIR)
+    #define HAS_I_DIR 1
+  #endif
+  #if PIN_EXISTS(I_STEP)
+    #define HAS_I_STEP 1
+  #endif
+  #if PIN_EXISTS(I_MS1)
+    #define HAS_I_MS_PINS 1
+  #endif
 #endif
-#if PIN_EXISTS(Z4_DIR)
-  #define HAS_Z4_DIR 1
+
+#if LINEAR_AXES >= 5
+  #if PIN_EXISTS(J_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(J))
+    #define HAS_J_ENABLE 1
+  #endif
+  #if PIN_EXISTS(J_DIR)
+    #define HAS_J_DIR 1
+  #endif
+  #if PIN_EXISTS(J_STEP)
+    #define HAS_J_STEP 1
+  #endif
+  #if PIN_EXISTS(J_MS1)
+    #define HAS_J_MS_PINS 1
+  #endif
 #endif
-#if PIN_EXISTS(Z4_STEP)
-  #define HAS_Z4_STEP 1
-#endif
-#if PIN_EXISTS(Z4_MS1)
-  #define HAS_Z4_MS_PINS 1
+
+#if LINEAR_AXES >= 6
+  #if PIN_EXISTS(K_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(K))
+    #define HAS_K_ENABLE 1
+  #endif
+  #if PIN_EXISTS(K_DIR)
+    #define HAS_K_DIR 1
+  #endif
+  #if PIN_EXISTS(K_STEP)
+    #define HAS_K_STEP 1
+  #endif
+  #if PIN_EXISTS(K_MS1)
+    #define HAS_K_MS_PINS 1
+  #endif
 #endif
 
 // Extruder steppers and solenoids
-#if PIN_EXISTS(E0_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0))
-  #define HAS_E0_ENABLE 1
-#endif
-#if PIN_EXISTS(E0_DIR)
-  #define HAS_E0_DIR 1
-#endif
-#if PIN_EXISTS(E0_STEP)
-  #define HAS_E0_STEP 1
-#endif
-#if PIN_EXISTS(E0_MS1)
-  #define HAS_E0_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL0)
-  #define HAS_SOLENOID_0 1
-#endif
+#if HAS_EXTRUDERS
 
-#if PIN_EXISTS(E1_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1))
-  #define HAS_E1_ENABLE 1
-#endif
-#if PIN_EXISTS(E1_DIR)
-  #define HAS_E1_DIR 1
-#endif
-#if PIN_EXISTS(E1_STEP)
-  #define HAS_E1_STEP 1
-#endif
-#if PIN_EXISTS(E1_MS1)
-  #define HAS_E1_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL1)
-  #define HAS_SOLENOID_1 1
-#endif
+  #if PIN_EXISTS(E0_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E0))
+    #define HAS_E0_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E0_DIR)
+    #define HAS_E0_DIR 1
+  #endif
+  #if PIN_EXISTS(E0_STEP)
+    #define HAS_E0_STEP 1
+  #endif
+  #if PIN_EXISTS(E0_MS1)
+    #define HAS_E0_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL0)
+    #define HAS_SOLENOID_0 1
+  #endif
 
-#if PIN_EXISTS(E2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2))
-  #define HAS_E2_ENABLE 1
-#endif
-#if PIN_EXISTS(E2_DIR)
-  #define HAS_E2_DIR 1
-#endif
-#if PIN_EXISTS(E2_STEP)
-  #define HAS_E2_STEP 1
-#endif
-#if PIN_EXISTS(E2_MS1)
-  #define HAS_E2_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL2)
-  #define HAS_SOLENOID_2 1
-#endif
+  #if PIN_EXISTS(E1_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E1))
+    #define HAS_E1_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E1_DIR)
+    #define HAS_E1_DIR 1
+  #endif
+  #if PIN_EXISTS(E1_STEP)
+    #define HAS_E1_STEP 1
+  #endif
+  #if PIN_EXISTS(E1_MS1)
+    #define HAS_E1_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL1)
+    #define HAS_SOLENOID_1 1
+  #endif
 
-#if PIN_EXISTS(E3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3))
-  #define HAS_E3_ENABLE 1
-#endif
-#if PIN_EXISTS(E3_DIR)
-  #define HAS_E3_DIR 1
-#endif
-#if PIN_EXISTS(E3_STEP)
-  #define HAS_E3_STEP 1
-#endif
-#if PIN_EXISTS(E3_MS1)
-  #define HAS_E3_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL3)
-  #define HAS_SOLENOID_3 1
-#endif
+  #if PIN_EXISTS(E2_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E2))
+    #define HAS_E2_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E2_DIR)
+    #define HAS_E2_DIR 1
+  #endif
+  #if PIN_EXISTS(E2_STEP)
+    #define HAS_E2_STEP 1
+  #endif
+  #if PIN_EXISTS(E2_MS1)
+    #define HAS_E2_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL2)
+    #define HAS_SOLENOID_2 1
+  #endif
 
-#if PIN_EXISTS(E4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4))
-  #define HAS_E4_ENABLE 1
-#endif
-#if PIN_EXISTS(E4_DIR)
-  #define HAS_E4_DIR 1
-#endif
-#if PIN_EXISTS(E4_STEP)
-  #define HAS_E4_STEP 1
-#endif
-#if PIN_EXISTS(E4_MS1)
-  #define HAS_E4_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL4)
-  #define HAS_SOLENOID_4 1
-#endif
+  #if PIN_EXISTS(E3_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E3))
+    #define HAS_E3_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E3_DIR)
+    #define HAS_E3_DIR 1
+  #endif
+  #if PIN_EXISTS(E3_STEP)
+    #define HAS_E3_STEP 1
+  #endif
+  #if PIN_EXISTS(E3_MS1)
+    #define HAS_E3_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL3)
+    #define HAS_SOLENOID_3 1
+  #endif
 
-#if PIN_EXISTS(E5_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5))
-  #define HAS_E5_ENABLE 1
-#endif
-#if PIN_EXISTS(E5_DIR)
-  #define HAS_E5_DIR 1
-#endif
-#if PIN_EXISTS(E5_STEP)
-  #define HAS_E5_STEP 1
-#endif
-#if PIN_EXISTS(E5_MS1)
-  #define HAS_E5_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL5)
-  #define HAS_SOLENOID_5 1
-#endif
+  #if PIN_EXISTS(E4_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E4))
+    #define HAS_E4_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E4_DIR)
+    #define HAS_E4_DIR 1
+  #endif
+  #if PIN_EXISTS(E4_STEP)
+    #define HAS_E4_STEP 1
+  #endif
+  #if PIN_EXISTS(E4_MS1)
+    #define HAS_E4_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL4)
+    #define HAS_SOLENOID_4 1
+  #endif
 
-#if PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6))
-  #define HAS_E6_ENABLE 1
-#endif
-#if PIN_EXISTS(E6_DIR)
-  #define HAS_E6_DIR 1
-#endif
-#if PIN_EXISTS(E6_STEP)
-  #define HAS_E6_STEP 1
-#endif
-#if PIN_EXISTS(E6_MS1)
-  #define HAS_E6_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL6)
-  #define HAS_SOLENOID_6 1
-#endif
+  #if PIN_EXISTS(E5_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E5))
+    #define HAS_E5_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E5_DIR)
+    #define HAS_E5_DIR 1
+  #endif
+  #if PIN_EXISTS(E5_STEP)
+    #define HAS_E5_STEP 1
+  #endif
+  #if PIN_EXISTS(E5_MS1)
+    #define HAS_E5_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL5)
+    #define HAS_SOLENOID_5 1
+  #endif
 
-#if PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7))
-  #define HAS_E7_ENABLE 1
-#endif
-#if PIN_EXISTS(E7_DIR)
-  #define HAS_E7_DIR 1
-#endif
-#if PIN_EXISTS(E7_STEP)
-  #define HAS_E7_STEP 1
-#endif
-#if PIN_EXISTS(E7_MS1)
-  #define HAS_E7_MS_PINS 1
-#endif
-#if PIN_EXISTS(SOL7)
-  #define HAS_SOLENOID_7 1
-#endif
+  #if PIN_EXISTS(E6_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E6))
+    #define HAS_E6_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E6_DIR)
+    #define HAS_E6_DIR 1
+  #endif
+  #if PIN_EXISTS(E6_STEP)
+    #define HAS_E6_STEP 1
+  #endif
+  #if PIN_EXISTS(E6_MS1)
+    #define HAS_E6_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL6)
+    #define HAS_SOLENOID_6 1
+  #endif
+
+  #if PIN_EXISTS(E7_ENABLE) || (ENABLED(SOFTWARE_DRIVER_ENABLE) && AXIS_IS_TMC(E7))
+    #define HAS_E7_ENABLE 1
+  #endif
+  #if PIN_EXISTS(E7_DIR)
+    #define HAS_E7_DIR 1
+  #endif
+  #if PIN_EXISTS(E7_STEP)
+    #define HAS_E7_STEP 1
+  #endif
+  #if PIN_EXISTS(E7_MS1)
+    #define HAS_E7_MS_PINS 1
+  #endif
+  #if PIN_EXISTS(SOL7)
+    #define HAS_SOLENOID_7 1
+  #endif
+
+#endif // HAS_EXTRUDERS
 
 //
 // Trinamic Stepper Drivers
 //
 
 #if HAS_TRINAMIC_CONFIG
-  #if ANY(STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_E)
+  #if ANY(STEALTHCHOP_E, STEALTHCHOP_XY, STEALTHCHOP_Z, STEALTHCHOP_I, STEALTHCHOP_J, STEALTHCHOP_K)
     #define STEALTHCHOP_ENABLED 1
   #endif
   #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
@@ -1733,6 +1912,65 @@
   #if defined(Z4_STALL_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z4)
     #define Z4_SENSORLESS 1
   #endif
+
+  #if AXIS_HAS_STEALTHCHOP(X)
+    #define X_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(X2)
+    #define X2_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Y)
+    #define Y_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Y2)
+    #define Y2_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Z)
+    #define Z_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Z2)
+    #define Z2_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Z3)
+    #define Z3_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(Z4)
+    #define Z4_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(I)
+    #define I_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(J)
+    #define J_HAS_STEALTHCHOP 1
+  #endif
+  #if AXIS_HAS_STEALTHCHOP(K)
+    #define K_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 0 && AXIS_HAS_STEALTHCHOP(E0)
+    #define E0_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1)
+    #define E1_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2)
+    #define E2_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3)
+    #define E3_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4)
+    #define E4_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 5 && AXIS_HAS_STEALTHCHOP(E5)
+    #define E5_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 6 && AXIS_HAS_STEALTHCHOP(E6)
+    #define E6_HAS_STEALTHCHOP 1
+  #endif
+  #if E_STEPPERS > 7 && AXIS_HAS_STEALTHCHOP(E7)
+    #define E7_HAS_STEALTHCHOP 1
+  #endif
+
   #if ENABLED(SPI_ENDSTOPS)
     #define X_SPI_SENSORLESS X_SENSORLESS
     #define Y_SPI_SENSORLESS Y_SENSORLESS
@@ -1762,6 +2000,21 @@
   #ifndef Z4_INTERPOLATE
     #define Z4_INTERPOLATE INTERPOLATE
   #endif
+  #if LINEAR_AXES >= 4
+    #ifndef I_INTERPOLATE
+      #define I_INTERPOLATE INTERPOLATE
+    #endif
+  #endif
+  #if LINEAR_AXES >= 5
+    #ifndef J_INTERPOLATE
+      #define J_INTERPOLATE INTERPOLATE
+    #endif
+  #endif
+  #if LINEAR_AXES >= 6
+    #ifndef K_INTERPOLATE
+      #define K_INTERPOLATE INTERPOLATE
+    #endif
+  #endif
   #ifndef E0_INTERPOLATE
     #define E0_INTERPOLATE INTERPOLATE
   #endif
@@ -1795,6 +2048,15 @@
   #ifndef Z_SLAVE_ADDRESS
     #define Z_SLAVE_ADDRESS  0
   #endif
+  #ifndef I_SLAVE_ADDRESS
+    #define I_SLAVE_ADDRESS 0
+  #endif
+  #ifndef J_SLAVE_ADDRESS
+    #define J_SLAVE_ADDRESS 0
+  #endif
+  #ifndef K_SLAVE_ADDRESS
+    #define K_SLAVE_ADDRESS 0
+  #endif
   #ifndef X2_SLAVE_ADDRESS
     #define X2_SLAVE_ADDRESS 0
   #endif
@@ -1849,6 +2111,10 @@
   #define HAS_TMC_SW_SERIAL 1
 #endif
 
+#if !USE_SENSORLESS
+  #undef SENSORLESS_BACKOFF_MM
+#endif
+
 //
 // Set USING_HW_SERIALn flags for used Serial Ports
 //
@@ -1968,18 +2234,36 @@
 #if _HAS_STOP(X,MAX)
   #define HAS_X_MAX 1
 #endif
-#if _HAS_STOP(Y,MIN)
+#if HAS_Y_AXIS && _HAS_STOP(Y,MIN)
   #define HAS_Y_MIN 1
 #endif
-#if _HAS_STOP(Y,MAX)
+#if HAS_Y_AXIS && _HAS_STOP(Y,MAX)
   #define HAS_Y_MAX 1
 #endif
-#if _HAS_STOP(Z,MIN)
+#if BOTH(HAS_Z_AXIS, USE_ZMIN_PLUG) && _HAS_STOP(Z,MIN)
   #define HAS_Z_MIN 1
 #endif
-#if _HAS_STOP(Z,MAX)
+#if BOTH(HAS_Z_AXIS, USE_ZMAX_PLUG) && _HAS_STOP(Z,MAX)
   #define HAS_Z_MAX 1
 #endif
+#if _HAS_STOP(I,MIN)
+  #define HAS_I_MIN 1
+#endif
+#if _HAS_STOP(I,MAX)
+  #define HAS_I_MAX 1
+#endif
+#if _HAS_STOP(J,MIN)
+  #define HAS_J_MIN 1
+#endif
+#if _HAS_STOP(J,MAX)
+  #define HAS_J_MAX 1
+#endif
+#if _HAS_STOP(K,MIN)
+  #define HAS_K_MIN 1
+#endif
+#if _HAS_STOP(K,MAX)
+  #define HAS_K_MAX 1
+#endif
 #if PIN_EXISTS(X2_MIN)
   #define HAS_X2_MIN 1
 #endif
@@ -2348,7 +2632,10 @@
 #if PIN_EXISTS(DIGIPOTSS)
   #define HAS_MOTOR_CURRENT_SPI 1
 #endif
-#if ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z, MOTOR_CURRENT_PWM_E)
+#if HAS_EXTRUDERS && PIN_EXISTS(MOTOR_CURRENT_PWM_E)
+  #define HAS_MOTOR_CURRENT_PWM_E 1
+#endif
+#if HAS_MOTOR_CURRENT_PWM_E || ANY_PIN(MOTOR_CURRENT_PWM_X, MOTOR_CURRENT_PWM_Y, MOTOR_CURRENT_PWM_XY, MOTOR_CURRENT_PWM_Z)
   #define HAS_MOTOR_CURRENT_PWM 1
 #endif
 
@@ -2358,7 +2645,7 @@
 #if ANY(HAS_E0_MS_PINS, HAS_E1_MS_PINS, HAS_E2_MS_PINS, HAS_E3_MS_PINS, HAS_E4_MS_PINS, HAS_E5_MS_PINS, HAS_E6_MS_PINS, HAS_E7_MS_PINS)
   #define HAS_SOME_E_MS_PINS 1
 #endif
-#if ANY(HAS_X_MS_PINS, HAS_X2_MS_PINS, HAS_Y_MS_PINS, HAS_Y2_MS_PINS, HAS_SOME_Z_MS_PINS, HAS_SOME_E_MS_PINS)
+#if ANY(HAS_X_MS_PINS, HAS_X2_MS_PINS, HAS_Y_MS_PINS, HAS_Y2_MS_PINS, HAS_SOME_Z_MS_PINS, HAS_I_MS_PINS, HAS_J_MS_PINS, HAS_K_MS_PINS, HAS_SOME_E_MS_PINS)
   #define HAS_MICROSTEPS 1
 #endif
 

Marlin/src/inc/SanityCheck.h

@@ -34,6 +34,10 @@
   #error "Marlin requires C++11 support (gcc >= 4.7, Arduino IDE >= 1.6.8). Please upgrade your toolchain."
 #endif
 
+// Strings for sanity check messages
+#define _LINEAR_AXES_STR LINEAR_AXIS_GANG("X ", "Y ", "Z ", "I ", "J ", "K ")
+#define _LOGICAL_AXES_STR LOGICAL_AXIS_GANG("E ", "X ", "Y ", "Z ", "I ", "J ", "K ")
+
 // Make sure macros aren't borked
 #define TEST1
 #define TEST2 1
@@ -562,8 +566,13 @@
   #error "CUSTOM_USER_MENUS has been replaced by CUSTOM_MENU_MAIN and CUSTOM_MENU_CONFIG."
 #elif defined(MKS_LCD12864)
   #error "MKS_LCD12864 is now MKS_LCD12864A or MKS_LCD12864B."
+#elif defined(NEOPIXEL_BKGD_LED_INDEX)
+  #error "NEOPIXEL_BKGD_LED_INDEX is now NEOPIXEL_BKGD_INDEX_FIRST."
 #endif
 
+constexpr float sbm[] = AXIS_RELATIVE_MODES;
+static_assert(COUNT(sbm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _LOGICAL_AXES_STR "elements.");
+
 /**
  * Probe temp compensation requirements
  */
@@ -642,14 +651,18 @@
 
 #if ENABLED(Y_DUAL_STEPPER_DRIVERS) && !GOOD_AXIS_PINS(Y)
   #error "Y_DUAL_STEPPER_DRIVERS requires Y2 pins to be defined."
-#elif !WITHIN(NUM_Z_STEPPER_DRIVERS, 1, 4)
-  #error "NUM_Z_STEPPER_DRIVERS must be an integer from 1 to 4."
-#elif NUM_Z_STEPPER_DRIVERS == 2 && !GOOD_AXIS_PINS(Z2)
-  #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2."
-#elif NUM_Z_STEPPER_DRIVERS == 3 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3))
-  #error "If NUM_Z_STEPPER_DRIVERS is 3, you must define stepper pins for Z2 and Z3."
-#elif NUM_Z_STEPPER_DRIVERS == 4 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3) && GOOD_AXIS_PINS(Z4))
-  #error "If NUM_Z_STEPPER_DRIVERS is 4, you must define stepper pins for Z2, Z3, and Z4."
+#endif
+
+#if HAS_Z_AXIS
+  #if !WITHIN(NUM_Z_STEPPER_DRIVERS, 1, 4)
+    #error "NUM_Z_STEPPER_DRIVERS must be an integer from 1 to 4."
+  #elif NUM_Z_STEPPER_DRIVERS == 2 && !GOOD_AXIS_PINS(Z2)
+    #error "If NUM_Z_STEPPER_DRIVERS is 2, you must define stepper pins for Z2."
+  #elif NUM_Z_STEPPER_DRIVERS == 3 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3))
+    #error "If NUM_Z_STEPPER_DRIVERS is 3, you must define stepper pins for Z2 and Z3."
+  #elif NUM_Z_STEPPER_DRIVERS == 4 && !(GOOD_AXIS_PINS(Z2) && GOOD_AXIS_PINS(Z3) && GOOD_AXIS_PINS(Z4))
+    #error "If NUM_Z_STEPPER_DRIVERS is 4, you must define stepper pins for Z2, Z3, and Z4."
+  #endif
 #endif
 
 /**
@@ -702,6 +715,12 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #error "Enable only one of ENDSTOPPULLUP_Y_MIN or ENDSTOPPULLDOWN_Y_MIN."
 #elif BOTH(ENDSTOPPULLUP_ZMIN, ENDSTOPPULLDOWN_ZMIN)
   #error "Enable only one of ENDSTOPPULLUP_Z_MIN or ENDSTOPPULLDOWN_Z_MIN."
+#elif BOTH(ENDSTOPPULLUP_IMIN, ENDSTOPPULLDOWN_IMIN)
+  #error "Enable only one of ENDSTOPPULLUP_I_MIN or ENDSTOPPULLDOWN_I_MIN."
+#elif BOTH(ENDSTOPPULLUP_JMIN, ENDSTOPPULLDOWN_JMIN)
+  #error "Enable only one of ENDSTOPPULLUP_J_MIN or ENDSTOPPULLDOWN_J_MIN."
+#elif BOTH(ENDSTOPPULLUP_KMIN, ENDSTOPPULLDOWN_KMIN)
+  #error "Enable only one of ENDSTOPPULLUP_K_MIN or ENDSTOPPULLDOWN_K_MIN."
 #endif
 
 /**
@@ -924,6 +943,13 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   static_assert(WITHIN(npp_xyz.z, Z_MIN_POS, Z_MAX_POS), "NOZZLE_PARK_POINT.Z is out of bounds (Z_MIN_POS, Z_MAX_POS).");
 #endif
 
+/**
+ * Instant Freeze
+ */
+#if ENABLED(FREEZE_FEATURE) && !PIN_EXISTS(FREEZE)
+  #error "FREEZE_FEATURE requires a FREEZE_PIN to be defined."
+#endif
+
 /**
  * Individual axis homing is useless for DELTAS
  */
@@ -952,9 +978,11 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
  * Multi-Material-Unit 2 / EXTENDABLE_EMU_MMU2 requirements
  */
 #if HAS_PRUSA_MMU2
-  #if EXTRUDERS != 5
+  #if !HAS_EXTENDABLE_MMU && EXTRUDERS != 5
     #undef SINGLENOZZLE
     #error "PRUSA_MMU2(S) requires exactly 5 EXTRUDERS. Please update your Configuration."
+  #elif HAS_EXTENDABLE_MMU && EXTRUDERS > 15
+    #error "EXTRUDERS is too large for MMU(S) emulation mode. The maximum value is 15."
   #elif DISABLED(NOZZLE_PARK_FEATURE)
     #error "PRUSA_MMU2(S) requires NOZZLE_PARK_FEATURE. Enable it to continue."
   #elif HAS_PRUSA_MMU2S && DISABLED(FILAMENT_RUNOUT_SENSOR)
@@ -967,18 +995,19 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     static_assert(nullptr == strstr(MMU2_FILAMENT_RUNOUT_SCRIPT, "M600"), "ADVANCED_PAUSE_FEATURE is required to use M600 with PRUSA_MMU2(S) / HAS_EXTENDABLE_MMU(S).");
   #endif
 #endif
-#if HAS_EXTENDABLE_MMU && EXTRUDERS > 15
-  #error "Too many extruders for MMU(S) emulation mode. (15 maximum)."
-#endif
 
 /**
  * Options only for EXTRUDERS > 1
  */
 #if HAS_MULTI_EXTRUDER
 
-  #if EXTRUDERS > 8
-    #error "Marlin supports a maximum of 8 EXTRUDERS."
+  #if HAS_EXTENDABLE_MMU
+    #define MAX_EXTRUDERS 15
+  #else
+    #define MAX_EXTRUDERS  8
   #endif
+  static_assert(EXTRUDERS <= MAX_EXTRUDERS, "Marlin supports a maximum of " STRINGIFY(MAX_EXTRUDERS) " EXTRUDERS.");
+  #undef MAX_EXTRUDERS
 
   #if ENABLED(HEATERS_PARALLEL)
     #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
@@ -1261,6 +1290,42 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
   #error "To use CHAMBER_LIMIT_SWITCHING you must disable PIDTEMPCHAMBER."
 #endif
 
+/**
+ * Features that require a min/max/specific LINEAR_AXES
+ */
+#if HAS_LEVELING && !HAS_Z_AXIS
+  #error "Leveling in Marlin requires three or more axes, with Z as the vertical axis."
+#elif ENABLED(CNC_WORKSPACE_PLANES) && !HAS_Z_AXIS
+  #error "CNC_WORKSPACE_PLANES currently requires LINEAR_AXES >= 3"
+#elif ENABLED(DIRECT_STEPPING) && LINEAR_AXES > XYZ
+  #error "DIRECT_STEPPING currently requires LINEAR_AXES 3"
+#elif ENABLED(FOAMCUTTER_XYUV) && LINEAR_AXES < 5
+  #error "FOAMCUTTER_XYUV requires LINEAR_AXES >= 5."
+#endif
+
+/**
+ * Allow only extra axis codes that do not conflict with G-code parameter names
+ */
+#if LINEAR_AXES >= 4
+  #if AXIS4_NAME != 'A' && AXIS4_NAME != 'B' && AXIS4_NAME != 'C' && AXIS4_NAME != 'U' && AXIS4_NAME != 'V' && AXIS4_NAME != 'W'
+    #error "AXIS4_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #endif
+#endif
+#if LINEAR_AXES >= 5
+  #if AXIS5_NAME == AXIS4_NAME || AXIS5_NAME == AXIS6_NAME
+    #error "AXIS5_NAME must be different from AXIS4_NAME and AXIS6_NAME"
+  #elif AXIS5_NAME != 'A' && AXIS5_NAME != 'B' && AXIS5_NAME != 'C' && AXIS5_NAME != 'U' && AXIS5_NAME != 'V' && AXIS5_NAME != 'W'
+    #error "AXIS5_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #endif
+#endif
+#if LINEAR_AXES >= 6
+  #if AXIS6_NAME == AXIS5_NAME || AXIS6_NAME == AXIS4_NAME
+    #error "AXIS6_NAME must be different from AXIS5_NAME and AXIS4_NAME."
+  #elif AXIS6_NAME != 'A' && AXIS6_NAME != 'B' && AXIS6_NAME != 'C' && AXIS6_NAME != 'U' && AXIS6_NAME != 'V' && AXIS6_NAME != 'W'
+    #error "AXIS6_NAME can only be one of 'A', 'B', 'C', 'U', 'V', or 'W'."
+  #endif
+#endif
+
 /**
  * Kinematics
  */
@@ -1268,8 +1333,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * Allow only one kinematic type to be defined
  */
-#if MANY(DELTA, MORGAN_SCARA, MP_SCARA, AXEL_TPARA, COREXY, COREXZ, COREYZ, COREYX, COREZX, COREZY, MARKFORGED_XY)
-  #error "Please enable only one of DELTA, MORGAN_SCARA, AXEL_TPARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, COREZY, or MARKFORGED_XY."
+#if MANY(DELTA, MORGAN_SCARA, MP_SCARA, AXEL_TPARA, COREXY, COREXZ, COREYZ, COREYX, COREZX, COREZY, MARKFORGED_XY, FOAMCUTTER_XYUV)
+  #error "Please enable only one of DELTA, MORGAN_SCARA, MP_SCARA, AXEL_TPARA, COREXY, COREXZ, COREYZ, COREYX, COREZX, COREZY, MARKFORGED_XY, or FOAMCUTTER_XYUV."
 #endif
 
 /**
@@ -1582,6 +1647,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "LCD_BED_LEVELING requires a programmable LCD controller."
   #elif !(ENABLED(MESH_BED_LEVELING) || HAS_ABL_NOT_UBL)
     #error "LCD_BED_LEVELING requires MESH_BED_LEVELING or AUTO_BED_LEVELING."
+  #elif ENABLED(MESH_EDIT_MENU) && !HAS_MESH
+    #error "MESH_EDIT_MENU requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR or AUTO_BED_LEVELING_UBL."
   #endif
 #endif
 
@@ -1590,13 +1657,59 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #endif
 
 /**
- * Homing
+ * Homing checks
  */
-constexpr float hbm[] = HOMING_BUMP_MM;
-static_assert(COUNT(hbm) == XYZ, "HOMING_BUMP_MM requires X, Y, and Z elements.");
-static_assert(hbm[X_AXIS] >= 0, "HOMING_BUMP_MM.X must be greater than or equal to 0.");
-static_assert(hbm[Y_AXIS] >= 0, "HOMING_BUMP_MM.Y must be greater than or equal to 0.");
-static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal to 0.");
+#ifndef HOMING_BUMP_MM
+  #error "Required setting HOMING_BUMP_MM is missing!"
+#elif !defined(HOMING_BUMP_DIVISOR)
+  #error "Required setting HOMING_BUMP_DIVISOR is missing!"
+#else
+  constexpr float hbm[] = HOMING_BUMP_MM, hbd[] = HOMING_BUMP_DIVISOR;
+  static_assert(COUNT(hbm) == LINEAR_AXES, "HOMING_BUMP_MM must have " _LINEAR_AXES_STR "elements (and no others).");
+  LINEAR_AXIS_CODE(
+    static_assert(hbm[X_AXIS] >= 0, "HOMING_BUMP_MM.X must be greater than or equal to 0."),
+    static_assert(hbm[Y_AXIS] >= 0, "HOMING_BUMP_MM.Y must be greater than or equal to 0."),
+    static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal to 0."),
+    static_assert(hbm[I_AXIS] >= 0, "HOMING_BUMP_MM.I must be greater than or equal to 0."),
+    static_assert(hbm[J_AXIS] >= 0, "HOMING_BUMP_MM.J must be greater than or equal to 0."),
+    static_assert(hbm[K_AXIS] >= 0, "HOMING_BUMP_MM.K must be greater than or equal to 0.")
+  );
+  static_assert(COUNT(hbd) == LINEAR_AXES, "HOMING_BUMP_DIVISOR must have " _LINEAR_AXES_STR "elements (and no others).");
+  LINEAR_AXIS_CODE(
+    static_assert(hbd[X_AXIS] >= 1, "HOMING_BUMP_DIVISOR.X must be greater than or equal to 1."),
+    static_assert(hbd[Y_AXIS] >= 1, "HOMING_BUMP_DIVISOR.Y must be greater than or equal to 1."),
+    static_assert(hbd[Z_AXIS] >= 1, "HOMING_BUMP_DIVISOR.Z must be greater than or equal to 1."),
+    static_assert(hbd[I_AXIS] >= 1, "HOMING_BUMP_DIVISOR.I must be greater than or equal to 1."),
+    static_assert(hbd[J_AXIS] >= 1, "HOMING_BUMP_DIVISOR.J must be greater than or equal to 1."),
+    static_assert(hbd[K_AXIS] >= 1, "HOMING_BUMP_DIVISOR.K must be greater than or equal to 1.")
+  );
+#endif
+
+#ifdef HOMING_BACKOFF_POST_MM
+  constexpr float hbp[] = HOMING_BACKOFF_POST_MM;
+  static_assert(COUNT(hbp) == LINEAR_AXES, "HOMING_BACKOFF_POST_MM must have " _LINEAR_AXES_STR "elements (and no others).");
+  LINEAR_AXIS_CODE(
+    static_assert(hbp[X_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.X must be greater than or equal to 0."),
+    static_assert(hbp[Y_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.Y must be greater than or equal to 0."),
+    static_assert(hbp[Z_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.Z must be greater than or equal to 0."),
+    static_assert(hbp[I_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.I must be greater than or equal to 0."),
+    static_assert(hbp[J_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.J must be greater than or equal to 0."),
+    static_assert(hbp[K_AXIS] >= 0, "HOMING_BACKOFF_POST_MM.K must be greater than or equal to 0.")
+  );
+#endif
+
+#ifdef SENSORLESS_BACKOFF_MM
+  constexpr float sbm[] = SENSORLESS_BACKOFF_MM;
+  static_assert(COUNT(sbm) == LINEAR_AXES, "SENSORLESS_BACKOFF_MM must have " _LINEAR_AXES_STR "elements (and no others).");
+  LINEAR_AXIS_CODE(
+    static_assert(sbm[X_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.X must be greater than or equal to 0."),
+    static_assert(sbm[Y_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.Y must be greater than or equal to 0."),
+    static_assert(sbm[Z_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.Z must be greater than or equal to 0."),
+    static_assert(sbm[I_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.I must be greater than or equal to 0."),
+    static_assert(sbm[J_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.J must be greater than or equal to 0."),
+    static_assert(sbm[K_AXIS] >= 0, "SENSORLESS_BACKOFF_MM.K must be greater than or equal to 0.")
+  );
+#endif
 
 #if ENABLED(CODEPENDENT_XY_HOMING)
   #if ENABLED(QUICK_HOME)
@@ -1617,9 +1730,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 /**
  * Make sure DISABLE_[XYZ] compatible with selected homing options
  */
-#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z)
+#if ANY(DISABLE_X, DISABLE_Y, DISABLE_Z, DISABLE_I, DISABLE_J, DISABLE_K)
   #if EITHER(HOME_AFTER_DEACTIVATE, Z_SAFE_HOMING)
-    #error "DISABLE_[XYZ] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
+    #error "DISABLE_[XYZIJK] is not compatible with HOME_AFTER_DEACTIVATE or Z_SAFE_HOMING."
   #endif
 #endif
 
@@ -1976,12 +2089,16 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "HEATER_0_PIN not defined for this board."
 #elif !ANY_PIN(TEMP_0, MAX6675_SS)
   #error "TEMP_0_PIN or MAX6675_SS not defined for this board."
-#elif ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
-  #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
-#elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
-  #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
-#elif EXTRUDERS && TEMP_SENSOR_0 == 0
-  #error "TEMP_SENSOR_0 is required if there are any extruders."
+#endif
+
+#if HAS_EXTRUDERS
+  #if ((defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && !PINS_EXIST(E0_STEP, E0_DIR))
+    #error "E0_STEP_PIN or E0_DIR_PIN not defined for this board."
+  #elif ( !(defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && (!PINS_EXIST(E0_STEP, E0_DIR) || !HAS_E0_ENABLE))
+    #error "E0_STEP_PIN, E0_DIR_PIN, or E0_ENABLE_PIN not defined for this board."
+  #elif EXTRUDERS && TEMP_SENSOR_0 == 0
+    #error "TEMP_SENSOR_0 is required if there are any extruders."
+  #endif
 #endif
 
 /**
@@ -2073,7 +2190,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #define _PLUG_UNUSED_TEST(A,P) (DISABLED(USE_##P##MIN_PLUG, USE_##P##MAX_PLUG) \
   && !(ENABLED(A##_DUAL_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) \
   && !(ENABLED(A##_MULTI_ENDSTOPS) && WITHIN(A##2_USE_ENDSTOP, _##P##MAX_, _##P##MIN_)) )
-#define _AXIS_PLUG_UNUSED_TEST(A) (_PLUG_UNUSED_TEST(A,X) && _PLUG_UNUSED_TEST(A,Y) && _PLUG_UNUSED_TEST(A,Z))
+#define _AXIS_PLUG_UNUSED_TEST(A) (1 LINEAR_AXIS_GANG(&& _PLUG_UNUSED_TEST(A,X), && _PLUG_UNUSED_TEST(A,Y), && _PLUG_UNUSED_TEST(A,Z), && _PLUG_UNUSED_TEST(A,I), && _PLUG_UNUSED_TEST(A,J), && _PLUG_UNUSED_TEST(A,K) ) )
 
 // A machine with endstops must have a minimum of 3
 #if HAS_ENDSTOPS
@@ -2086,6 +2203,15 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #if _AXIS_PLUG_UNUSED_TEST(Z)
     #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG."
   #endif
+  #if LINEAR_AXES >= 4 && _AXIS_PLUG_UNUSED_TEST(I)
+    #error "You must enable USE_IMIN_PLUG or USE_IMAX_PLUG."
+  #endif
+  #if LINEAR_AXES >= 5 && _AXIS_PLUG_UNUSED_TEST(J)
+    #error "You must enable USE_JMIN_PLUG or USE_JMAX_PLUG."
+  #endif
+  #if LINEAR_AXES >= 6 && _AXIS_PLUG_UNUSED_TEST(K)
+    #error "You must enable USE_KMIN_PLUG or USE_KMAX_PLUG."
+  #endif
 
   // Delta and Cartesian use 3 homing endstops
   #if NONE(IS_SCARA, SPI_ENDSTOPS)
@@ -2097,6 +2223,18 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
       #error "Enable USE_YMIN_PLUG when homing Y to MIN."
     #elif Y_HOME_TO_MAX && DISABLED(USE_YMAX_PLUG)
       #error "Enable USE_YMAX_PLUG when homing Y to MAX."
+    #elif LINEAR_AXES >= 4 && I_HOME_TO_MIN && DISABLED(USE_IMIN_PLUG)
+      #error "Enable USE_IMIN_PLUG when homing I to MIN."
+    #elif LINEAR_AXES >= 4 && I_HOME_TO_MAX && DISABLED(USE_IMAX_PLUG)
+      #error "Enable USE_IMAX_PLUG when homing I to MAX."
+    #elif LINEAR_AXES >= 5 && J_HOME_TO_MIN && DISABLED(USE_JMIN_PLUG)
+      #error "Enable USE_JMIN_PLUG when homing J to MIN."
+    #elif LINEAR_AXES >= 5 && J_HOME_TO_MAX && DISABLED(USE_JMAX_PLUG)
+      #error "Enable USE_JMAX_PLUG when homing J to MAX."
+    #elif LINEAR_AXES >= 6 && K_HOME_TO_MIN && DISABLED(USE_KMIN_PLUG)
+      #error "Enable USE_KMIN_PLUG when homing K to MIN."
+    #elif LINEAR_AXES >= 6 && K_HOME_TO_MAX && DISABLED(USE_KMAX_PLUG)
+      #error "Enable USE_KMAX_PLUG when homing K to MAX."
     #endif
   #endif
 
@@ -2491,6 +2629,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "An SPI driven TMC driver on E6 requires E6_CS_PIN."
 #elif INVALID_TMC_SPI(E7)
   #error "An SPI driven TMC driver on E7 requires E7_CS_PIN."
+#elif INVALID_TMC_SPI(I)
+  #error "An SPI driven TMC on I requires I_CS_PIN."
+#elif INVALID_TMC_SPI(J)
+  #error "An SPI driven TMC on J requires J_CS_PIN."
+#elif INVALID_TMC_SPI(K)
+  #error "An SPI driven TMC on K requires K_CS_PIN."
 #endif
 #undef INVALID_TMC_SPI
 
@@ -2530,6 +2674,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #error "TMC2208 or TMC2209 on E6 requires E6_HARDWARE_SERIAL or E6_SERIAL_(RX|TX)_PIN."
 #elif INVALID_TMC_UART(E7)
   #error "TMC2208 or TMC2209 on E7 requires E7_HARDWARE_SERIAL or E7_SERIAL_(RX|TX)_PIN."
+#elif LINEAR_AXES >= 4 && INVALID_TMC_UART(I)
+  #error "TMC2208 or TMC2209 on I requires I_HARDWARE_SERIAL or I_SERIAL_(RX|TX)_PIN."
+#elif LINEAR_AXES >= 5 && INVALID_TMC_UART(J)
+  #error "TMC2208 or TMC2209 on J requires J_HARDWARE_SERIAL or J_SERIAL_(RX|TX)_PIN."
+#elif LINEAR_AXES >= 6 && INVALID_TMC_UART(K)
+  #error "TMC2208 or TMC2209 on K requires K_HARDWARE_SERIAL or K_SERIAL_(RX|TX)_PIN."
 #endif
 #undef INVALID_TMC_UART
 
@@ -2553,6 +2703,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   INVALID_TMC_ADDRESS(Z3);
 #elif AXIS_DRIVER_TYPE_Z4(TMC2209)
   INVALID_TMC_ADDRESS(Z4);
+#elif AXIS_DRIVER_TYPE_I(TMC2209)
+  INVALID_TMC_ADDRESS(I);
+#elif AXIS_DRIVER_TYPE_J(TMC2209)
+  INVALID_TMC_ADDRESS(J);
+#elif AXIS_DRIVER_TYPE_K(TMC2209)
+  INVALID_TMC_ADDRESS(K);
 #elif AXIS_DRIVER_TYPE_E0(TMC2209)
   INVALID_TMC_ADDRESS(E0);
 #elif AXIS_DRIVER_TYPE_E1(TMC2209)
@@ -2608,6 +2764,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   INVALID_TMC_MS(E6)
 #elif !TMC_MICROSTEP_IS_VALID(E7)
   INVALID_TMC_MS(E7)
+#elif LINEAR_AXES >= 4 && !TMC_MICROSTEP_IS_VALID(I)
+  INVALID_TMC_MS(I)
+#elif LINEAR_AXES >= 5 && !TMC_MICROSTEP_IS_VALID(J)
+  INVALID_TMC_MS(J)
+#elif LINEAR_AXES >= 6 && !TMC_MICROSTEP_IS_VALID(K)
+  INVALID_TMC_MS(K)
 #endif
 #undef INVALID_TMC_MS
 #undef TMC_MICROSTEP_IS_VALID
@@ -2628,6 +2790,15 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #define X_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(X,TMC2209)
   #define Y_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Y,TMC2209)
   #define Z_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(Z,TMC2209)
+  #if LINEAR_AXES >= 4
+    #define I_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(I,TMC2209)
+  #endif
+  #if LINEAR_AXES >= 5
+    #define J_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(J,TMC2209)
+  #endif
+  #if LINEAR_AXES >= 6
+    #define K_ENDSTOP_INVERTING !AXIS_DRIVER_TYPE(K,TMC2209)
+  #endif
 
   #if NONE(SPI_ENDSTOPS, ONBOARD_ENDSTOPPULLUPS, ENDSTOPPULLUPS)
     #if   X_SENSORLESS && X_HOME_TO_MIN && DISABLED(ENDSTOPPULLUP_XMIN)
@@ -2642,6 +2813,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
       #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMIN (or ENDSTOPPULLUPS) when homing to Z_MIN."
     #elif Z_SENSORLESS && Z_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_ZMAX)
       #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_ZMAX (or ENDSTOPPULLUPS) when homing to Z_MAX."
+    #elif LINEAR_AXES >= 4 && I_SENSORLESS && I_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_IMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_IMAX (or ENDSTOPPULLUPS) when homing to I_MAX."
+    #elif LINEAR_AXES >= 5 && J_SENSORLESS && J_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_JMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_JMAX (or ENDSTOPPULLUPS) when homing to J_MAX."
+    #elif LINEAR_AXES >= 6 && K_SENSORLESS && K_HOME_TO_MAX && DISABLED(ENDSTOPPULLUP_KMAX)
+      #error "SENSORLESS_HOMING requires ENDSTOPPULLUP_KMAX (or ENDSTOPPULLUPS) when homing to K_MAX."
     #endif
   #endif
 
@@ -2686,6 +2863,42 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
       #else
         #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to Z_MAX."
       #endif
+    #elif LINEAR_AXES >= 4 && I_SENSORLESS && I_HOME_TO_MIN && I_MIN_ENDSTOP_INVERTING != I_ENDSTOP_INVERTING
+      #if I_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires I_MIN_ENDSTOP_INVERTING = true when homing to I_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires I_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to I_MIN."
+      #endif
+    #elif LINEAR_AXES >= 4 && I_SENSORLESS && I_HOME_TO_MAX && I_MAX_ENDSTOP_INVERTING != I_ENDSTOP_INVERTING
+      #if I_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires I_MAX_ENDSTOP_INVERTING = true when homing to I_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires I_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to I_MAX."
+      #endif
+    #elif LINEAR_AXES >= 5 && J_SENSORLESS && J_HOME_TO_MIN && J_MIN_ENDSTOP_INVERTING != J_ENDSTOP_INVERTING
+      #if J_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires J_MIN_ENDSTOP_INVERTING = true when homing to J_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires J_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to J_MIN."
+      #endif
+    #elif LINEAR_AXES >= 5 && J_SENSORLESS && J_HOME_TO_MAX && J_MAX_ENDSTOP_INVERTING != J_ENDSTOP_INVERTING
+      #if J_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires J_MAX_ENDSTOP_INVERTING = true when homing to J_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires J_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to J_MAX."
+      #endif
+    #elif LINEAR_AXES >= 6 && K_SENSORLESS && K_HOME_TO_MIN && K_MIN_ENDSTOP_INVERTING != K_ENDSTOP_INVERTING
+      #if K_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires K_MIN_ENDSTOP_INVERTING = true when homing to K_MIN."
+      #else
+        #error "SENSORLESS_HOMING requires K_MIN_ENDSTOP_INVERTING = false when homing TMC2209 to K_MIN."
+      #endif
+    #elif LINEAR_AXES >= 6 && K_SENSORLESS && K_HOME_TO_MAX && K_MAX_ENDSTOP_INVERTING != K_ENDSTOP_INVERTING
+      #if K_ENDSTOP_INVERTING
+        #error "SENSORLESS_HOMING requires K_MAX_ENDSTOP_INVERTING = true when homing to K_MAX."
+      #else
+        #error "SENSORLESS_HOMING requires K_MAX_ENDSTOP_INVERTING = false when homing TMC2209 to K_MAX."
+      #endif
     #endif
   #endif
 
@@ -2700,6 +2913,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
   #undef X_ENDSTOP_INVERTING
   #undef Y_ENDSTOP_INVERTING
   #undef Z_ENDSTOP_INVERTING
+  #undef I_ENDSTOP_INVERTING
+  #undef J_ENDSTOP_INVERTING
+  #undef K_ENDSTOP_INVERTING
 #endif
 
 // Sensorless probing requirements
@@ -2762,6 +2978,12 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
       #define CS_COMPARE Z2_CS_PIN
     #elif IN_CHAIN(Z3)
       #define CS_COMPARE Z3_CS_PIN
+    #elif IN_CHAIN(I)
+      #define CS_COMPARE I_CS_PIN
+    #elif IN_CHAIN(J)
+      #define CS_COMPARE J_CS_PIN
+    #elif IN_CHAIN(K)
+      #define CS_COMPARE K_CS_PIN
     #elif IN_CHAIN(E0)
       #define CS_COMPARE E0_CS_PIN
     #elif IN_CHAIN(E1)
@@ -2781,6 +3003,7 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
     #endif
     #define BAD_CS_PIN(A) (IN_CHAIN(A) && A##_CS_PIN != CS_COMPARE)
     #if  BAD_CS_PIN(X ) || BAD_CS_PIN(Y ) || BAD_CS_PIN(Z ) || BAD_CS_PIN(X2) || BAD_CS_PIN(Y2) || BAD_CS_PIN(Z2) || BAD_CS_PIN(Z3) || BAD_CS_PIN(Z4) \
+      || BAD_CS_PIN(I) || BAD_CS_PIN(J) || BAD_CS_PIN(K) \
       || BAD_CS_PIN(E0) || BAD_CS_PIN(E1) || BAD_CS_PIN(E2) || BAD_CS_PIN(E3) || BAD_CS_PIN(E4) || BAD_CS_PIN(E5) || BAD_CS_PIN(E6) || BAD_CS_PIN(E7)
       #error "All chained TMC drivers must use the same CS pin."
     #endif
@@ -2791,6 +3014,13 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
 #endif
 #undef IN_CHAIN
 
+/**
+ * L64XX requirement
+ */
+#if HAS_L64XX && LINEAR_AXES >= 4
+  #error "L64XX requires LINEAR_AXES 3. Homing with L64XX is not yet implemented for LINEAR_AXES > 3."
+#endif
+
 /**
  * Digipot requirement
  */
@@ -2808,43 +3038,48 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal
  */
 constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT,
                 sanity_arr_2[] = DEFAULT_MAX_FEEDRATE,
-                sanity_arr_3[] = DEFAULT_MAX_ACCELERATION;
+                sanity_arr_3[] = DEFAULT_MAX_ACCELERATION,
+                sanity_arr_7[] = HOMING_FEEDRATE_MM_M;
 
 #define _ARR_TEST(N,I) (sanity_arr_##N[_MIN(I,int(COUNT(sanity_arr_##N))-1)] > 0)
 #if HAS_MULTI_EXTRUDER
   #define _EXTRA_NOTE " (Did you forget to enable DISTINCT_E_FACTORS?)"
-#elif EXTRUDERS == 0
-  #define _EXTRA_NOTE " (Note: EXTRUDERS is set to 0.)"
 #else
-  #define _EXTRA_NOTE ""
+  #define _EXTRA_NOTE " (Should be " STRINGIFY(LINEAR_AXES) "+" STRINGIFY(E_STEPPERS) ")"
 #endif
 
-static_assert(COUNT(sanity_arr_1) >= LOGICAL_AXES,  "DEFAULT_AXIS_STEPS_PER_UNIT requires X, Y, Z and E elements.");
+static_assert(COUNT(sanity_arr_1) >= LOGICAL_AXES,  "DEFAULT_AXIS_STEPS_PER_UNIT requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_1) <= DISTINCT_AXES, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements." _EXTRA_NOTE);
 static_assert(   _ARR_TEST(1,0) && _ARR_TEST(1,1) && _ARR_TEST(1,2)
               && _ARR_TEST(1,3) && _ARR_TEST(1,4) && _ARR_TEST(1,5)
               && _ARR_TEST(1,6) && _ARR_TEST(1,7) && _ARR_TEST(1,8),
               "DEFAULT_AXIS_STEPS_PER_UNIT values must be positive.");
 
-static_assert(COUNT(sanity_arr_2) >= LOGICAL_AXES,  "DEFAULT_MAX_FEEDRATE requires X, Y, Z and E elements.");
+static_assert(COUNT(sanity_arr_2) >= LOGICAL_AXES,  "DEFAULT_MAX_FEEDRATE requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_2) <= DISTINCT_AXES, "DEFAULT_MAX_FEEDRATE has too many elements." _EXTRA_NOTE);
 static_assert(   _ARR_TEST(2,0) && _ARR_TEST(2,1) && _ARR_TEST(2,2)
               && _ARR_TEST(2,3) && _ARR_TEST(2,4) && _ARR_TEST(2,5)
               && _ARR_TEST(2,6) && _ARR_TEST(2,7) && _ARR_TEST(2,8),
               "DEFAULT_MAX_FEEDRATE values must be positive.");
 
-static_assert(COUNT(sanity_arr_3) >= LOGICAL_AXES,  "DEFAULT_MAX_ACCELERATION requires X, Y, Z and E elements.");
+static_assert(COUNT(sanity_arr_3) >= LOGICAL_AXES,  "DEFAULT_MAX_ACCELERATION requires " _LOGICAL_AXES_STR "elements.");
 static_assert(COUNT(sanity_arr_3) <= DISTINCT_AXES, "DEFAULT_MAX_ACCELERATION has too many elements." _EXTRA_NOTE);
 static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
               && _ARR_TEST(3,3) && _ARR_TEST(3,4) && _ARR_TEST(3,5)
               && _ARR_TEST(3,6) && _ARR_TEST(3,7) && _ARR_TEST(3,8),
               "DEFAULT_MAX_ACCELERATION values must be positive.");
 
+static_assert(COUNT(sanity_arr_7) == LINEAR_AXES,  "HOMING_FEEDRATE_MM_M requires " _LINEAR_AXES_STR "elements (and no others).");
+static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
+              && _ARR_TEST(3,3) && _ARR_TEST(3,4) && _ARR_TEST(3,5)
+              && _ARR_TEST(3,6) && _ARR_TEST(3,7) && _ARR_TEST(3,8),
+              "HOMING_FEEDRATE_MM_M values must be positive.");
+
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
   #ifdef MAX_ACCEL_EDIT_VALUES
     constexpr float sanity_arr_4[] = MAX_ACCEL_EDIT_VALUES;
-    static_assert(COUNT(sanity_arr_4) >= LOGICAL_AXES, "MAX_ACCEL_EDIT_VALUES requires X, Y, Z and E elements.");
-    static_assert(COUNT(sanity_arr_4) <= LOGICAL_AXES, "MAX_ACCEL_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
+    static_assert(COUNT(sanity_arr_4) >= LOGICAL_AXES, "MAX_ACCEL_EDIT_VALUES requires " _LOGICAL_AXES_STR "elements.");
+    static_assert(COUNT(sanity_arr_4) <= LOGICAL_AXES, "MAX_ACCEL_EDIT_VALUES has too many elements. " _LOGICAL_AXES_STR "elements only.");
     static_assert(   _ARR_TEST(4,0) && _ARR_TEST(4,1) && _ARR_TEST(4,2)
                   && _ARR_TEST(4,3) && _ARR_TEST(4,4) && _ARR_TEST(4,5)
                   && _ARR_TEST(4,6) && _ARR_TEST(4,7) && _ARR_TEST(4,8),
@@ -2855,8 +3090,8 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #if ENABLED(LIMITED_MAX_FR_EDITING)
   #ifdef MAX_FEEDRATE_EDIT_VALUES
     constexpr float sanity_arr_5[] = MAX_FEEDRATE_EDIT_VALUES;
-    static_assert(COUNT(sanity_arr_5) >= LOGICAL_AXES, "MAX_FEEDRATE_EDIT_VALUES requires X, Y, Z and E elements.");
-    static_assert(COUNT(sanity_arr_5) <= LOGICAL_AXES, "MAX_FEEDRATE_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
+    static_assert(COUNT(sanity_arr_5) >= LOGICAL_AXES, "MAX_FEEDRATE_EDIT_VALUES requires " _LOGICAL_AXES_STR "elements.");
+    static_assert(COUNT(sanity_arr_5) <= LOGICAL_AXES, "MAX_FEEDRATE_EDIT_VALUES has too many elements. " _LOGICAL_AXES_STR "elements only.");
     static_assert(   _ARR_TEST(5,0) && _ARR_TEST(5,1) && _ARR_TEST(5,2)
                   && _ARR_TEST(5,3) && _ARR_TEST(5,4) && _ARR_TEST(5,5)
                   && _ARR_TEST(5,6) && _ARR_TEST(5,7) && _ARR_TEST(5,8),
@@ -2867,8 +3102,8 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #if ENABLED(LIMITED_JERK_EDITING)
   #ifdef MAX_JERK_EDIT_VALUES
     constexpr float sanity_arr_6[] = MAX_JERK_EDIT_VALUES;
-    static_assert(COUNT(sanity_arr_6) >= LOGICAL_AXES, "MAX_JERK_EDIT_VALUES requires X, Y, Z and E elements.");
-    static_assert(COUNT(sanity_arr_6) <= LOGICAL_AXES, "MAX_JERK_EDIT_VALUES has too many elements. X, Y, Z and E elements only.");
+    static_assert(COUNT(sanity_arr_6) >= LOGICAL_AXES, "MAX_JERK_EDIT_VALUES requires " _LOGICAL_AXES_STR "elements.");
+    static_assert(COUNT(sanity_arr_6) <= LOGICAL_AXES, "MAX_JERK_EDIT_VALUES has too many elements. " _LOGICAL_AXES_STR "elements only.");
     static_assert(   _ARR_TEST(6,0) && _ARR_TEST(6,1) && _ARR_TEST(6,2)
                   && _ARR_TEST(6,3) && _ARR_TEST(6,4) && _ARR_TEST(6,5)
                   && _ARR_TEST(6,6) && _ARR_TEST(6,7) && _ARR_TEST(6,8),
@@ -2947,6 +3182,10 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
     #error "MECHANICAL_GANTRY_CALIBRATION Requires GANTRY_CALIBRATION_EXTRA_HEIGHT to be set."
   #elif !defined(GANTRY_CALIBRATION_FEEDRATE)
     #error "MECHANICAL_GANTRY_CALIBRATION Requires GANTRY_CALIBRATION_FEEDRATE to be set."
+  #elif ENABLED(Z_MULTI_ENDSTOPS)
+    #error "Sorry! MECHANICAL_GANTRY_CALIBRATION cannot be used with Z_MULTI_ENDSTOPS."
+  #elif ENABLED(Z_STEPPER_AUTO_ALIGN)
+    #error "Sorry! MECHANICAL_GANTRY_CALIBRATION cannot be used with Z_STEPPER_AUTO_ALIGN."
   #endif
   #if defined(GANTRY_CALIBRATION_SAFE_POSITION) && !defined(GANTRY_CALIBRATION_XY_PARK_FEEDRATE)
     #error "GANTRY_CALIBRATION_SAFE_POSITION Requires GANTRY_CALIBRATION_XY_PARK_FEEDRATE to be set."
@@ -3264,6 +3503,22 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #if _BAD_DRIVER(Z)
   #error "Z_DRIVER_TYPE is not recognized."
 #endif
+#if LINEAR_AXES >= 4
+  #if _BAD_DRIVER(I)
+    #error "I_DRIVER_TYPE is not recognized."
+  #endif
+#endif
+#if LINEAR_AXES >= 5
+  #if _BAD_DRIVER(J)
+    #error "J_DRIVER_TYPE is not recognized."
+  #endif
+#endif
+#if LINEAR_AXES >= 6
+  #if _BAD_DRIVER(K)
+    #error "K_DRIVER_TYPE is not recognized."
+  #endif
+#endif
+
 #if _BAD_DRIVER(X2)
   #error "X2_DRIVER_TYPE is not recognized."
 #endif
@@ -3307,7 +3562,5 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 
 // Misc. Cleanup
 #undef _TEST_PWM
-
-#if ENABLED(FREEZE_FEATURE) && !PIN_EXISTS(FREEZE)
-  #error "FREEZE_FEATURE requires a FREEZE_PIN to be defined."
-#endif
+#undef _LINEAR_AXES_STR
+#undef _LOGICAL_AXES_STR

Marlin/src/inc/Version.h

@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2021-05-23"
+  #define STRING_DISTRIBUTION_DATE "2021-06-05"
 #endif
 
 /**
@@ -52,7 +52,7 @@
  * to alert users to major changes.
  */
 
-#define MARLIN_HEX_VERSION 02000801
+#define MARLIN_HEX_VERSION 02000900
 #ifndef REQUIRED_CONFIGURATION_H_VERSION
   #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
 #endif

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -856,8 +856,10 @@ void MarlinUI::draw_status_screen() {
       #else
 
         if (show_e_total) {
-          _draw_axis_value(E_AXIS, xstring, true);
-          lcd_put_u8str_P(PSTR("       "));
+          #if ENABLED(LCD_SHOW_E_TOTAL)
+            _draw_axis_value(E_AXIS, xstring, true);
+            lcd_put_u8str_P(PSTR("       "));
+          #endif
         }
         else {
           _draw_axis_value(X_AXIS, xstring, blink);

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -1235,7 +1235,7 @@ inline ENCODER_DiffState get_encoder_state() {
 void HMI_Plan_Move(const feedRate_t fr_mm_s) {
   if (!planner.is_full()) {
     planner.synchronize();
-    planner.buffer_line(current_position, fr_mm_s, active_extruder);
+    planner.buffer_line(current_position, fr_mm_s);
     DWIN_UpdateLCD();
   }
 }

Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp

@@ -666,10 +666,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_Z_MAX_SPEED, &planner.settings.max_feedrate_mm_s[Z_AXIS], ScreenHandler.HandleMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
 
   #if HOTENDS >= 1
-    VPHELPER(VP_E0_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E0_AXIS], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    VPHELPER(VP_E0_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(0)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E1_AXIS], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
+    VPHELPER(VP_E1_MAX_SPEED, &planner.settings.max_feedrate_mm_s[E_AXIS_N(1)], ScreenHandler.HandleExtruderMaxSpeedChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
   #endif
 
   VPHELPER(VP_X_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[X_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
@@ -677,10 +677,10 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   VPHELPER(VP_Z_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[Z_AXIS], ScreenHandler.HandleMaxAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
 
   #if HOTENDS >= 1
-    VPHELPER(VP_E0_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E0_AXIS], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_E0_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(0)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
   #endif
   #if HOTENDS >= 2
-    VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E1_AXIS], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
+    VPHELPER(VP_E1_ACC_MAX_SPEED, (uint16_t *)&planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(1)], ScreenHandler.HandleExtruderAccChange_MKS, ScreenHandler.DGUSLCD_SendWordValueToDisplay),
   #endif
 
   VPHELPER(VP_TRAVEL_SPEED, (uint16_t *)&planner.settings.travel_acceleration, ScreenHandler.HandleTravelAccChange_MKS, ScreenHandler.DGUSLCD_SendFloatAsIntValueToDisplay<0>),
@@ -697,13 +697,13 @@ const struct DGUS_VP_Variable ListOfVP[] PROGMEM = {
   #endif
 
   #if ENABLED(SENSORLESS_HOMING)  // TMC SENSORLESS Setting
-    #if AXIS_HAS_STEALTHCHOP(X)
+    #if X_HAS_STEALTHCHOP
       VPHELPER(VP_TMC_X_STEP, &tmc_step.x, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue),
     #endif
-    #if AXIS_HAS_STEALTHCHOP(Y)
+    #if Y_HAS_STEALTHCHOP
       VPHELPER(VP_TMC_Y_STEP, &tmc_step.y, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue),
     #endif
-    #if AXIS_HAS_STEALTHCHOP(Z)
+    #if Z_HAS_STEALTHCHOP
       VPHELPER(VP_TMC_Z_STEP, &tmc_step.z, ScreenHandler.TMC_ChangeConfig, ScreenHandler.DGUSLCD_SendTMCStepValue),
     #endif
   #endif

Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.h

@@ -59,19 +59,19 @@ extern xyz_int_t tmc_step;
 
 extern uint16_t lcd_default_light;
 
-#if AXIS_HAS_STEALTHCHOP(X)
+#if X_HAS_STEALTHCHOP
   extern uint16_t tmc_x_current;
 #endif
-#if AXIS_HAS_STEALTHCHOP(Y)
+#if Y_HAS_STEALTHCHOP
   extern uint16_t tmc_y_current;
 #endif
-#if AXIS_HAS_STEALTHCHOP(Z)
+#if Z_HAS_STEALTHCHOP
   extern uint16_t tmc_z_current;
 #endif
-#if AXIS_HAS_STEALTHCHOP(E0)
+#if E0_HAS_STEALTHCHOP
   extern uint16_t tmc_e0_current;
 #endif
-#if AXIS_HAS_STEALTHCHOP(E1)
+#if E1_HAS_STEALTHCHOP
   extern uint16_t tmc_e1_current;
 #endif
 

Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp

@@ -134,15 +134,15 @@ void DGUSScreenHandler::DGUSLCD_SendStringToDisplay_Language_MKS(DGUS_VP_Variabl
 
 void DGUSScreenHandler::DGUSLCD_SendTMCStepValue(DGUS_VP_Variable &var) {
   #if ENABLED(SENSORLESS_HOMING)
-    #if AXIS_HAS_STEALTHCHOP(X)
+    #if X_HAS_STEALTHCHOP
       tmc_step.x = stepperX.homing_threshold();
       dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
     #endif
-    #if AXIS_HAS_STEALTHCHOP(Y)
+    #if Y_HAS_STEALTHCHOP
       tmc_step.y = stepperY.homing_threshold();
       dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
     #endif
-    #if AXIS_HAS_STEALTHCHOP(Z)
+    #if Z_HAS_STEALTHCHOP
       tmc_step.z = stepperZ.homing_threshold();
       dgusdisplay.WriteVariable(var.VP, *(int16_t*)var.memadr);
     #endif
@@ -659,7 +659,7 @@ void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) {
   switch (var.VP) {
     case VP_TMC_X_STEP:
       #if USE_SENSORLESS
-        #if AXIS_HAS_STEALTHCHOP(X)
+        #if X_HAS_STEALTHCHOP
           stepperX.homing_threshold(mks_min(tmc_value, 255));
           settings.save();
           //tmc_step.x = stepperX.homing_threshold();
@@ -668,7 +668,7 @@ void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) {
       break;
     case VP_TMC_Y_STEP:
       #if USE_SENSORLESS
-        #if AXIS_HAS_STEALTHCHOP(Y)
+        #if Y_HAS_STEALTHCHOP
           stepperY.homing_threshold(mks_min(tmc_value, 255));
           settings.save();
           //tmc_step.y = stepperY.homing_threshold();
@@ -677,7 +677,7 @@ void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) {
       break;
     case VP_TMC_Z_STEP:
       #if USE_SENSORLESS
-        #if AXIS_HAS_STEALTHCHOP(Z)
+        #if Z_HAS_STEALTHCHOP
           stepperZ.homing_threshold(mks_min(tmc_value, 255));
           settings.save();
           //tmc_step.z = stepperZ.homing_threshold();
@@ -737,15 +737,9 @@ void DGUSScreenHandler::TMC_ChangeConfig(DGUS_VP_Variable &var, void *val_ptr) {
       break;
   }
   #if USE_SENSORLESS
-    #if AXIS_HAS_STEALTHCHOP(X)
-      tmc_step.x = stepperX.homing_threshold();
-    #endif
-    #if AXIS_HAS_STEALTHCHOP(Y)
-      tmc_step.y = stepperY.homing_threshold();
-    #endif
-    #if AXIS_HAS_STEALTHCHOP(Z)
-      tmc_step.z = stepperZ.homing_threshold();
-    #endif
+    TERN_(X_HAS_STEALTHCHOP, tmc_step.x = stepperX.homing_threshold());
+    TERN_(Y_HAS_STEALTHCHOP, tmc_step.y = stepperY.homing_threshold());
+    TERN_(Z_HAS_STEALTHCHOP, tmc_step.z = stepperZ.homing_threshold());
   #endif
 }
 
@@ -1419,15 +1413,9 @@ bool DGUSScreenHandler::loop() {
     if (!booted && ELAPSED(ms, TERN(USE_MKS_GREEN_UI, 1000, BOOTSCREEN_TIMEOUT))) {
       booted = true;
       #if USE_SENSORLESS
-        #if AXIS_HAS_STEALTHCHOP(X)
-          tmc_step.x = stepperX.homing_threshold();
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Y)
-          tmc_step.y = stepperY.homing_threshold();
-        #endif
-        #if AXIS_HAS_STEALTHCHOP(Z)
-          tmc_step.z = stepperZ.homing_threshold();
-        #endif
+        TERN_(X_HAS_STEALTHCHOP, tmc_step.x = stepperX.homing_threshold());
+        TERN_(Y_HAS_STEALTHCHOP, tmc_step.y = stepperY.homing_threshold());
+        TERN_(Z_HAS_STEALTHCHOP, tmc_step.z = stepperZ.homing_threshold());
       #endif
 
       #if ENABLED(PREVENT_COLD_EXTRUSION)

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/constants.h

@@ -95,6 +95,7 @@ namespace FTDI_FT810 {
 namespace FTDI {
   constexpr uint8_t ARGB1555                           = 0;
   constexpr uint8_t L1                                 = 1;
+  constexpr uint8_t L2                                 = 17;
   constexpr uint8_t L4                                 = 2;
   constexpr uint8_t L8                                 = 3;
   constexpr uint8_t RGB332                             = 4;

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/basic/display_list.h

@@ -64,14 +64,14 @@ namespace FTDI {
   inline uint32_t CLEAR_COLOR_A(uint8_t alpha)                 {return DL::CLEAR_COLOR_A|(alpha&255UL);}
   inline uint32_t CLEAR_COLOR_RGB(uint8_t red, uint8_t green, uint8_t blue)
                                                                {return DL::CLEAR_COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);}
-  inline uint32_t CLEAR_COLOR_RGB(uint32_t rgb)                {return DL::CLEAR_COLOR_RGB|rgb;}
+  inline uint32_t CLEAR_COLOR_RGB(uint32_t rgb)                {return DL::CLEAR_COLOR_RGB|(rgb&0xFFFFFF);}
   inline uint32_t CLEAR_STENCIL(uint8_t s)                     {return DL::CLEAR_STENCIL|(s&255UL);}
   inline uint32_t CLEAR_TAG(uint8_t s)                         {return DL::CLEAR_TAG|(s&255UL);}
   inline uint32_t COLOR_A(uint8_t alpha)                       {return DL::COLOR_A|(alpha&255UL);}
   inline uint32_t COLOR_MASK(bool r, bool g, bool b, bool a)   {return DL::COLOR_MASK|((r?1UL:0UL)<<3)|((g?1UL:0UL)<<2)|((b?1UL:0UL)<<1)|(a?1UL:0UL);}
   inline uint32_t COLOR_RGB(uint8_t red,uint8_t green,uint8_t blue)
                                                                {return DL::COLOR_RGB|((red&255UL)<<16)|((green&255UL)<<8)|(blue&255UL);}
-  inline uint32_t COLOR_RGB(uint32_t rgb)                      {return DL::COLOR_RGB|rgb;}
+  inline uint32_t COLOR_RGB(uint32_t rgb)                      {return DL::COLOR_RGB|(rgb&0xFFFFFF);}
   /* inline uint32_t DISPLAY()                                 {return (0UL<<24)) */
   inline uint32_t END()                                        {return DL::END;}
   inline uint32_t JUMP(uint16_t dest)                          {return DL::JUMP|(dest&65535UL);}

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h

@@ -195,11 +195,31 @@
   #define pgm_read_ptr_far pgm_read_ptr
   #endif
 
+  // Use NUM_ARGS(__VA_ARGS__) to get the number of variadic arguments
+  #define _NUM_ARGS(_,Z,Y,X,W,V,U,T,S,R,Q,P,O,N,M,L,K,J,I,H,G,F,E,D,C,B,A,OUT,...) OUT
+  #define NUM_ARGS(V...) _NUM_ARGS(0,V,26,25,24,23,22,21,20,19,18,17,16,15,14,13,12,11,10,9,8,7,6,5,4,3,2,1,0)
+
+  // SERIAL_ECHOPAIR / SERIAL_ECHOPAIR_P is used to output a key value pair. The key must be a string and the value can be anything
+  // Print up to 12 pairs of values. Odd elements auto-wrapped in PSTR().
+  #define __SEP_N(N,V...)   _SEP_##N(V)
+  #define _SEP_N(N,V...)    __SEP_N(N,V)
+  #define _SEP_1(PRE)       SERIAL_ECHOPGM(PRE)
+  #define _SEP_2(PRE,V)     do{ Serial.print(F(PRE)); Serial.print(V); }while(0)
+  #define _SEP_3(a,b,c)     do{ _SEP_2(a,b); SERIAL_ECHOPGM(c); }while(0)
+  #define _SEP_4(a,b,V...)  do{ _SEP_2(a,b); _SEP_2(V); }while(0)
+
+  // Print up to 1 pairs of values followed by newline
+  #define __SELP_N(N,V...)            _SELP_##N(V)
+  #define _SELP_N(N,V...)             __SELP_N(N,V)
+  #define _SELP_1(PRE)                SERIAL_ECHOLNPGM(PRE)
+  #define _SELP_2(PRE,V)              do{ Serial.print(F(PRE)); Serial.println(V); }while(0)
+  #define _SELP_3(a,b,c)              do{ _SEP_2(a,b); SERIAL_ECHOLNPGM(c); }while(0)
+  #define _SELP_4(a,b,V...)           do{ _SEP_2(a,b); _SELP_2(V); }while(0)
   #define SERIAL_ECHO_START()
   #define SERIAL_ECHOLNPGM(str)       Serial.println(F(str))
   #define SERIAL_ECHOPGM(str)         Serial.print(F(str))
-  #define SERIAL_ECHO_MSG(str)        Serial.println(str)
-  #define SERIAL_ECHOLNPAIR(str, val) do{ Serial.print(F(str)); Serial.println(val); }while(0)
+  #define SERIAL_ECHO_MSG(V...)       SERIAL_ECHOLNPAIR(V)
+  #define SERIAL_ECHOLNPAIR(V...)     _SELP_N(NUM_ARGS(V),V)
   #define SERIAL_ECHOPAIR(str, val)   do{ Serial.print(F(str)); Serial.print(val); }while(0)
 
   #define safe_delay delay

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.cpp

@@ -26,4 +26,16 @@
 CommandProcessor::btn_style_func_t  *CommandProcessor::_btn_style_callback = CommandProcessor::default_button_style_func;
 bool CommandProcessor::is_tracking = false;
 
+uint32_t CommandProcessor::memcrc(uint32_t ptr, uint32_t num) {
+  const uint16_t x = CLCD::mem_read_16(CLCD::REG::CMD_WRITE);
+  memcrc(ptr, num, 0);
+  wait();
+  return CLCD::mem_read_32(CLCD::MAP::RAM_CMD + x + 12);
+}
+
+bool CommandProcessor::wait() {
+  while (is_processing() && !has_fault()) { /* nada */ }
+  return !has_fault();
+}
+
 #endif // FTDI_EXTENDED

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h

@@ -146,6 +146,9 @@ class CommandProcessor : public CLCD::CommandFifo {
       return *this;
     }
 
+    bool wait();
+    uint32_t memcrc(uint32_t ptr, uint32_t num);
+
     // Wrap all the CommandFifo routines to allow method chaining
 
     inline CommandProcessor& cmd      (uint32_t cmd32)            {CLCD::CommandFifo::cmd(cmd32); return *this;}

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/grid_layout.h

@@ -47,23 +47,25 @@
   #define MARGIN_DEFAULT   3
 #endif
 
-// EDGE_R adds some black space on the right edge of the display
-// This shifts some of the screens left to visually center them.
+// The EDGE variables adds some space on the edges of the display
 
+#define EDGE_T           0
+#define EDGE_B           0
+#define EDGE_L           0
 #define EDGE_R           0
 
 // GRID_X and GRID_Y computes the positions of the divisions on
 // the layout grid.
-#define GRID_X(x)        ((x)*(FTDI::display_width-EDGE_R)/GRID_COLS)
-#define GRID_Y(y)        ((y)*FTDI::display_height/GRID_ROWS)
+#define GRID_X(x)        ((x)*(FTDI::display_width-EDGE_R-EDGE_L)/GRID_COLS+EDGE_L)
+#define GRID_Y(y)        ((y)*(FTDI::display_height-EDGE_B-EDGE_T)/GRID_ROWS+EDGE_T)
 
 // BTN_X, BTN_Y, BTN_W and BTN_X returns the top-left and width
 // and height of a button, taking into account the button margins.
 
 #define BTN_X(x)         (GRID_X((x)-1) + MARGIN_L)
 #define BTN_Y(y)         (GRID_Y((y)-1) + MARGIN_T)
-#define BTN_W(w)         (GRID_X(w)   - MARGIN_L - MARGIN_R)
-#define BTN_H(h)         (GRID_Y(h)   - MARGIN_T - MARGIN_B)
+#define BTN_W(w)         (GRID_X(w) - GRID_X(0) - MARGIN_L - MARGIN_R)
+#define BTN_H(h)         (GRID_Y(h) - GRID_Y(0) - MARGIN_T - MARGIN_B)
 
 // Abbreviations for common phrases, to allow a button to be
 // defined in one line of source.

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp

@@ -86,8 +86,10 @@ namespace FTDI {
       if (font == 26) break;
     }
 
-    const uint16_t dx = (options & OPT_RIGHTX) ? w : (options & OPT_CENTERX) ? w/2 : 0;
-    const uint16_t dy = (options & OPT_CENTERY) ? (h - box_height)/2 : 0;
+    const uint16_t dx = (options & OPT_RIGHTX) ? w :
+                        (options & OPT_CENTERX) ? w/2 : 0;
+    const uint16_t dy = (options & OPT_BOTTOMY) ? (h - box_height) :
+                        (options & OPT_CENTERY) ? (h - box_height)/2 : 0;
 
     const char *line_start = str;
     const char *line_end;
@@ -105,11 +107,11 @@ namespace FTDI {
 
         #if ENABLED(TOUCH_UI_USE_UTF8)
           if (has_utf8_chars(line)) {
-            draw_utf8_text(cmd, x + dx, y + dy, line, fm.fs, options & ~OPT_CENTERY);
+            draw_utf8_text(cmd, x + dx, y + dy, line, fm.fs, options & ~(OPT_CENTERY | OPT_BOTTOMY));
           } else
         #endif
           {
-            cmd.CLCD::CommandFifo::text(x + dx, y + dy, font, options & ~OPT_CENTERY);
+            cmd.CLCD::CommandFifo::text(x + dx, y + dy, font, options & ~(OPT_CENTERY | OPT_BOTTOMY));
             cmd.CLCD::CommandFifo::str(line);
           }
       }

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.h

@@ -25,6 +25,8 @@
  * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit.
  */
 namespace FTDI {
+  constexpr uint16_t OPT_BOTTOMY      = 0x1000; // Non-standard
+
   void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, progmem_str str, uint16_t options = 0, uint8_t font = 31);
   void draw_text_box(class CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options = 0, uint8_t font = 31);
 }