Merge branch 'bugfix-2.0.x' into TMSX4_2.0_Bleeding

Creality 4.2.10 board (#20647 )
Add ALL_AXES manual move for UBL mesh editing
2021-01-03 11:58:40 -05:00 · 2021-01-03 07:16:50 -06:00 · 2021-01-02 19:01:09 -06:00 · 2021-01-02 18:41:16 -06:00 · 2021-01-02 18:37:47 -06:00 · 2021-01-03 00:25:06 +00:00
1143 changed files with 61357 additions and 37244 deletions
@@ -17,3 +17,5 @@
 *.png binary
 *.jpg binary
 *.fon binary
+*.bin binary
+*.woff binary
@@ -36,9 +36,11 @@ jobs:
        # Base Environments

        - DUE
+        - DUE_archim
        - esp32
        - linux_native
        - mega2560
+        - at90usb1286_dfu
        - teensy31
        - teensy35
        - teensy41
@@ -46,13 +48,13 @@ jobs:

        # Extended AVR Environments

-        - FYSETC_F6_13
+        - FYSETC_F6
        - mega1280
        - rambo
        - sanguino1284p
        - sanguino644p

-        # Extended STM32 Environments
+        # STM32F1 (Maple) Environments

        - STM32F103RC_btt
        - STM32F103RC_btt_USB
@@ -62,39 +64,39 @@ jobs:
        - STM32F103RC_meeb
        - jgaurora_a5s_a1
        - STM32F103VE_longer
+        - mks_robin
+        - mks_robin_lite
+        - mks_robin_pro
+        - STM32F103RET6_creality
+        - mks_robin_nano35
+
+        # STM32 (ST) Environments
+
        - STM32F407VE_black
        - STM32F401VE_STEVAL
        - BIGTREE_BTT002
        - BIGTREE_SKR_PRO
        - BIGTREE_GTR_V1_0
-        - mks_robin
        - mks_robin_stm32
        - ARMED
        - FYSETC_S6
        - STM32F070CB_malyan
        - STM32F070RB_malyan
        - malyan_M300
-        - mks_robin_lite
        - FLYF407ZG
        - rumba32
-        - mks_robin_pro
-        - STM32F103RET6_creality
        - LERDGEX
-        - mks_robin_nano35
+        - mks_robin_nano35_stm32
+        - NUCLEO_F767ZI
+        - REMRAM_V1

        # Put lengthy tests last

        - LPC1768
        - LPC1769

-        # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
-
-        #- STM32F4
-        #- STM32F7
-
        # Non-working environment tests
        #- at90usb1286_cdc
-        #- at90usb1286_dfu
        #- STM32F103CB_malyan
        #- mks_robin_mini

@@ -116,8 +118,4 @@ jobs:

    - name: Run ${{ matrix.test-platform }} Tests
      run: |
-        # Inline tests script
-        chmod +x buildroot/bin/*
-        chmod +x buildroot/tests/*
-        export PATH=./buildroot/bin/:./buildroot/tests/:${PATH}
-        run_tests . ${{ matrix.test-platform }}
+        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
@@ -77,7 +77,6 @@ tags
 *.out
 *.app

-
 #
 # C
 #
@@ -149,7 +148,7 @@ Marlin/*/*/*/*/readme.txt
 # Secure Credentials
 Configuration_Secure.h

-#Visual Studio
+# Visual Studio
 *.sln
 *.vcxproj
 *.vcxproj.user
@@ -160,27 +159,34 @@ __vm/
 .vs/
 vc-fileutils.settings

-#Visual Studio Code
+# Visual Studio Code
 .vscode
 .vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/*.db

-#cmake
+# cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt

-#CLion
+# CLion
 cmake-build-*

-#Eclipse
+# Eclipse
 .project
 .cproject
 .pydevproject
 .settings
 .classpath

-#Python
+# Python
 __pycache__
+
+# IOLogger logs
+*_log.csv
+
+# Simulation / Native
+eeprom.dat
+imgui.ini
@@ -0,0 +1,52 @@
+help:
+	@echo "Tasks for local development:"
+	@echo "* tests-single-ci:             Run a single test from inside the CI"
+	@echo "* tests-single-local:          Run a single test locally"
+	@echo "* tests-single-local-docker:   Run a single test locally, using docker-compose"
+	@echo "* tests-all-local:             Run all tests locally"
+	@echo "* tests-all-local-docker:      Run all tests locally, using docker-compose"
+	@echo "* setup-local-docker:          Setup local docker-compose"
+	@echo ""
+	@echo "Options for testing:"
+	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
+	@echo "                       test. If you set it to ALL it will run all "
+	@echo "                       tests, but some of them are broken: use "
+	@echo "                       tests-all-* instead to run only the ones that "
+	@echo "                       run on GitHub CI"
+	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
+	@echo "                       the index of the test (1-based)"
+	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
+	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
+	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
+.PHONY: help
+
+tests-single-ci:
+	export GIT_RESET_HARD=true
+	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
+.PHONY: tests-single-ci
+
+tests-single-local:
+	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
+	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
+	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
+	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
+.PHONY: tests-single-local
+
+tests-single-local-docker:
+	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
+	docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
+.PHONY: tests-single-local-docker
+
+tests-all-local:
+	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
+	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
+	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
+.PHONY: tests-all-local
+
+tests-all-local-docker:
+	docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
+.PHONY: tests-all-local-docker
+
+setup-local-docker:
+	docker-compose build
+.PHONY: setup-local-docker
@@ -22,8 +22,10 @@
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
 #     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
-#  3. Set the line containing "MCU" to match your board's processor.
-#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#  3. Set the line containing "MCU" to match your board's processor. Set
+#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
+#     following command to get a list of correspondences: `avrdude -c alf -p x`
+#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
 #     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
 #     change F_CPU to 8000000. If you are using Gen7 electronics, you
 #     probably need to use 20000000. Either way, you must regenerate
@@ -34,18 +36,18 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings at the top of this file can be overriden from
+# Note that all settings at the top of this file can be overridden from
 # the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
 #
 # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
+#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
 #
 # To compile and upload simply add "upload" to the end of the line...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
+#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
 #
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
@@ -57,7 +59,26 @@
 #

 # This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 11
+HARDWARE_MOTHERBOARD ?= 1020
+
+ifeq ($(OS),Windows_NT)
+  # Windows
+  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
+  ARDUINO_USER_DIR ?= ${HOME}/Arduino
+else
+  UNAME_S := $(shell uname -s)
+  ifeq ($(UNAME_S),Linux)
+    # Linux
+    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
+    ARDUINO_USER_DIR ?= ${HOME}/Arduino
+  endif
+  ifeq ($(UNAME_S),Darwin)
+    # Darwin (macOS)
+    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
+    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
+    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
+  endif
+endif

 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
@@ -67,32 +88,38 @@ ARDUINO_VERSION      ?= 106
 # The installed Libraries are in the User folder
 ARDUINO_USER_DIR ?= ${HOME}/Arduino

-# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
+# You can optionally set a path to the avr-gcc tools.
+# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
 AVR_TOOLS_PATH ?=

-#Programmer configuration
+# Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0

-#Directory used to build files in, contains all the build files, from object files to the final hex file
-#on linux it is best to put an absolute path like /home/username/tmp .
+# Directory used to build files in, contains all the build files, from object
+# files to the final hex file on linux it is best to put an absolute path
+# like /home/username/tmp .
 BUILD_DIR          ?= applet

 # This defines whether Liquid_TWI2 support will be built
 LIQUID_TWI2        ?= 0

-# this defines if Wire is needed
+# This defines if Wire is needed
 WIRE               ?= 0

-# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-U8GLIB             ?= 1
+# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
+# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
+TONE               ?= 1

-# this defines whether to include the Trinamic TMCStepper library
-TMC                ?= 1
+# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+U8GLIB             ?= 0

-# this defines whether to include the AdaFruit NeoPixel library
+# This defines whether to include the Trinamic TMCStepper library
+TMC                ?= 0
+
+# This defines whether to include the AdaFruit NeoPixel library
 NEOPIXEL           ?= 0

 ############
@@ -208,7 +235,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-  MCU ?= atmega1280
+  MCU              ?= atmega1280
+  PROG_MCU         ?= m1280

 # Azteeg X3
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
@@ -350,9 +378,11 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1320)
 # Minitronics v1.0/1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1400)
  MCU              ?= atmega1281
+  PROG_MCU         ?= m1281
 # Silvergate v1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1401)
  MCU              ?= atmega1281
+  PROG_MCU         ?= m1281

 #
 # Sanguinololu and Derivatives - ATmega644P, ATmega1284P
@@ -362,46 +392,57 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401)
 else ifeq ($(HARDWARE_MOTHERBOARD),1500)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Sanguinololu 1.2 and above
 else ifeq ($(HARDWARE_MOTHERBOARD),1501)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Melzi
 else ifeq ($(HARDWARE_MOTHERBOARD),1502)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Melzi V2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi with ATmega1284 (MaKr3d version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1504)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi Creality3D board (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Melzi Malyan M150 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # Anet 1.0 (Melzi clone)
 else ifeq ($(HARDWARE_MOTHERBOARD),1510)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p

 #
 # Other ATmega644P, ATmega644, ATmega1284P
@@ -411,50 +452,61 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1510)
 else ifeq ($(HARDWARE_MOTHERBOARD),1600)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen3+
 else ifeq ($(HARDWARE_MOTHERBOARD),1601)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen6
 else ifeq ($(HARDWARE_MOTHERBOARD),1602)
  HARDWARE_VARIANT ?= Gen6
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen6 deluxe
 else ifeq ($(HARDWARE_MOTHERBOARD),1603)
  HARDWARE_VARIANT ?= Gen6
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Gen7 custom (Alfons3 Version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1604)
  HARDWARE_VARIANT ?= Gen7
  MCU              ?= atmega644
+  PROG_MCU         ?= m644
  F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
 else ifeq ($(HARDWARE_MOTHERBOARD),1605)
  HARDWARE_VARIANT ?= Gen7
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
  F_CPU            ?= 20000000
 # Gen7 v1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1606)
  HARDWARE_VARIANT ?= Gen7
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
  F_CPU            ?= 20000000
 # Gen7 v1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1607)
  HARDWARE_VARIANT ?= Gen7
  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
  F_CPU            ?= 20000000
 # Alpha OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1608)
  HARDWARE_VARIANT ?= SanguinoA
  MCU              ?= atmega644
+  PROG_MCU         ?= m644
 # Final OMCA board
 else ifeq ($(HARDWARE_MOTHERBOARD),1609)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p
 # Sethi 3D_1
 else ifeq ($(HARDWARE_MOTHERBOARD),1610)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
+  PROG_MCU         ?= m644p

 #
 # Teensyduino - AT90USB1286, AT90USB1286P
@@ -464,51 +516,60 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610)
 else ifeq ($(HARDWARE_MOTHERBOARD),1700)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Printrboard (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1701)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Printrboard Revision F (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1702)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Brainwave (AT90USB646)
 else ifeq ($(HARDWARE_MOTHERBOARD),1703)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb646
+  PROG_MCU         ?= usb646
 # Brainwave Pro (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1704)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # SAV Mk-I (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1705)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # Teensy++2.0 (AT90USB1286)
 else ifeq ($(HARDWARE_MOTHERBOARD),1706)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286
 # 5DPrint D8 Driver Board
 else ifeq ($(HARDWARE_MOTHERBOARD),1707)
  HARDWARE_VARIANT ?= Teensy
  MCU              ?= at90usb1286
+  PROG_MCU         ?= usb1286

 # UltiMachine Archim1 (with DRV8825 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3023)
  HARDWARE_VARIANT ?= archim
  MCPU              = cortex-m3
-  F_CPU             = 84000000L
+  F_CPU             = 84000000
  IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3024)
  HARDWARE_VARIANT ?= archim
  MCPU              = cortex-m3
-  F_CPU             = 84000000L
+  F_CPU             = 84000000
  IS_MCU            = 0
 endif

 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
 # if you are setting this to something other than 16MHz
+# Do not put the UL suffix, it's done later on.
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000

@@ -518,7 +579,8 @@ IS_MCU ?= 1
 ifeq ($(IS_MCU),1)
  # Set to arduino, ATmega2560 if not yet set.
  HARDWARE_VARIANT ?= arduino
-  MCU ?= atmega2560
+  MCU              ?= atmega2560
+  PROG_MCU         ?= m2560

  TOOL_PREFIX = avr
  MCU_FLAGS   = -mmcu=$(MCU)
@@ -549,27 +611,36 @@ VPATH += $(BUILD_DIR)
 VPATH += $(HARDWARE_SRC)

 ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
+  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
 endif

 ifeq ($(IS_MCU),1)
  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino

+  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
 endif

 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
+
 ifeq ($(LIQUID_TWI2), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
+  WIRE   = 1
+  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
 endif
 ifeq ($(WIRE), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
+  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
+  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
@@ -641,13 +712,23 @@ ifeq ($(WIRE), 1)
  LIB_CXXSRC += Wire.cpp
 endif

+ifeq ($(TONE), 1)
+  LIB_CXXSRC += Tone.cpp
+endif
+
 ifeq ($(U8GLIB), 1)
  LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
+    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
+    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
 endif

 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
+    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
+    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
+    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
+    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif

 ifeq ($(RELOC_WORKAROUND), 1)
@@ -689,17 +770,23 @@ REMOVE = rm -f
 MV = mv -f

 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
+CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)

 ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS  += -DUSB_SERIAL
+  CDEFS      += -DUSB_SERIAL
  LIB_SRC    += usb.c pins_teensy.c
  LIB_CXXSRC += usb_api.cpp

 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
+  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
+  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
+
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
+    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
+    PluggableUSB.cpp USBCore.cpp
+
  LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c

  ifeq ($(U8GLIB), 1)
@@ -725,16 +812,20 @@ CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
 ifneq ($(HARDWARE_MOTHERBOARD),)
  CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
+
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
 CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
 CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
 CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
 ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
+
 ifeq ($(HARDWARE_VARIANT), archim)
  LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
  LD_SUFFIX = $(LDLIBS)
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
+  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
  LD_PREFIX = -Wl,--gc-sections,--relax
  LDFLAGS   = -lm
@@ -750,7 +841,7 @@ else
  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
  -b$(UPLOAD_RATE)

 # Since Marlin 2.0, the source files may be distributed into several
@@ -851,7 +942,7 @@ extcoff: $(TARGET).elf

 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@

 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -865,7 +956,7 @@ extcoff: $(TARGET).elf

 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)

 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"
@@ -1,6 +1,6 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -28,25 +28,25 @@
 /**
 * Marlin release version identifier
 */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "2.0.7_SX1"

 /**
 * Verbose version identifier which should contain a reference to the location
 * from where the binary was downloaded or the source code was compiled.
 */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"

 /**
 * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2019-07-10"
+#define STRING_DISTRIBUTION_DATE "2021-01-03"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
 */
-//#define MACHINE_NAME "3D Printer"
+#define MACHINE_NAME "TM3D SX4"

 /**
 * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +54,7 @@
 * has a distinct Github fork— the Source Code URL should just be the main
 * Marlin repository.
 */
-//#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/TM_SX4_2.0"

 /**
 * Default generic printer UUID.
@@ -65,7 +65,7 @@
 * The WEBSITE_URL is the location where users can get more information such as
 * documentation about a specific Marlin release.
 */
-//#define WEBSITE_URL "https://marlinfw.org"
+#define WEBSITE_URL "tinymachines3d.com"

 /**
 * Set the vendor info the serial USB interface, if changable
@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_INVERTED
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,
+  B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,
+  B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
+  B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
+  B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111,
+  B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111,
+  B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111,
+  B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111,
+  B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111,
+  B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
+  B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111,
+  B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
+  B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111,
+  B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111,
+  B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111,
+  B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111,
+  B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111,
+  B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
+  B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
+  B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
+  B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
+  B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111,
+  B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111,
+  B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111,
+  B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011,
+  B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011,
+  B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011,
+  B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111,
+  B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111
+};
@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            3
+#define STATUS_LOGO_WIDTH       24
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B10000000,B00000000,B00000001,
+  B10001110,B00000000,B11100001,
+  B10011111,B00000001,B11110001,
+  B10010011,B10000001,B00111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10111001,B11111001,
+  B10001111,B00101000,B11110001,
+  B10000000,B00111000,B00000001,
+  B10000000,B00000000,B00000001,
+  B10011111,B11111111,B11111001,
+  B10010001,B01110100,B10011001,
+  B10011011,B00000110,B10101001,
+  B10011011,B01010100,B10101001,
+  B10011011,B01010110,B10101001,
+  B10011011,B01010100,B10011001,
+  B10011111,B11111111,B11111001,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif
@@ -120,12 +120,18 @@ void HAL_init();
 inline void HAL_clear_reset_source() { MCUSR = 0; }
 inline uint8_t HAL_get_reset_source() { return MCUSR; }

-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
-extern "C" {
-  int freeMemory();
-}
-#pragma GCC diagnostic pop
+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
+extern "C" int freeMemory();
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 // ADC
 #ifdef DIDR2
@@ -34,17 +34,17 @@
 #include "../../inc/MarlinConfig.h"

 void spiBegin() {
-  OUT_WRITE(SS_PIN, HIGH);
-  SET_OUTPUT(SCK_PIN);
-  SET_INPUT(MISO_PIN);
-  SET_OUTPUT(MOSI_PIN);
+  OUT_WRITE(SD_SS_PIN, HIGH);
+  SET_OUTPUT(SD_SCK_PIN);
+  SET_INPUT(SD_MISO_PIN);
+  SET_OUTPUT(SD_MOSI_PIN);

  #if DISABLED(SOFTWARE_SPI)
    // SS must be in output mode even it is not chip select
-    //SET_OUTPUT(SS_PIN);
+    //SET_OUTPUT(SD_SS_PIN);
    // set SS high - may be chip select for another SPI device
    //#if SET_SPI_SS_HIGH
-      //WRITE(SS_PIN, HIGH);
+      //WRITE(SD_SS_PIN, HIGH);
    //#endif
    // set a default rate
    spiInit(1);
@@ -195,19 +195,19 @@ void spiBegin() {
    // no interrupts during byte receive - about 8µs
    cli();
    // output pin high - like sending 0xFF
-    WRITE(MOSI_PIN, HIGH);
+    WRITE(SD_MOSI_PIN, HIGH);

    LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);

      nop; // adjust so SCK is nice
      nop;

      data <<= 1;

-      if (READ(MISO_PIN)) data |= 1;
+      if (READ(SD_MISO_PIN)) data |= 1;

-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
    }

    sei();
@@ -225,10 +225,10 @@ void spiBegin() {
    // no interrupts during byte send - about 8µs
    cli();
    LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, LOW);
-      WRITE(MOSI_PIN, data & 0x80);
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, data & 0x80);
      data <<= 1;
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
    }

    nop; // hold SCK high for a few ns
@@ -236,7 +236,7 @@ void spiBegin() {
    nop;
    nop;

-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_SCK_PIN, LOW);

    sei();
  }
@@ -59,7 +59,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    uint8_t c = eeprom_read_byte((uint8_t*)pos);
    if (writing) *value = c;
@@ -124,7 +124,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(X_MAX_PIN);
    #endif
  #endif
@@ -132,7 +132,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(X_MIN_PIN);
    #endif
  #endif
@@ -140,7 +140,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Y_MAX_PIN);
    #endif
  #endif
@@ -148,7 +148,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Y_MIN_PIN);
    #endif
  #endif
@@ -156,7 +156,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z_MAX_PIN);
    #endif
  #endif
@@ -164,7 +164,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z_MIN_PIN);
    #endif
  #endif
@@ -172,7 +172,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X2_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(X2_MAX_PIN);
    #endif
  #endif
@@ -180,7 +180,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(X2_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(X2_MIN_PIN);
    #endif
  #endif
@@ -188,7 +188,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y2_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Y2_MAX_PIN);
    #endif
  #endif
@@ -196,7 +196,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Y2_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Y2_MIN_PIN);
    #endif
  #endif
@@ -204,7 +204,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z2_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z2_MAX_PIN);
    #endif
  #endif
@@ -212,7 +212,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z2_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z2_MIN_PIN);
    #endif
  #endif
@@ -220,7 +220,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z3_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z3_MAX_PIN);
    #endif
  #endif
@@ -228,7 +228,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z3_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z3_MIN_PIN);
    #endif
  #endif
@@ -236,7 +236,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z4_MAX_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z4_MAX_PIN);
    #endif
  #endif
@@ -244,7 +244,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z4_MIN_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z4_MIN_PIN);
    #endif
  #endif
@@ -252,7 +252,7 @@ void setup_endstop_interrupts() {
    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
      _ATTACH(Z_MIN_PROBE_PIN);
    #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
      pciSetup(Z_MIN_PROBE_PIN);
    #endif
  #endif
@@ -185,8 +185,8 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
        res_temp_phase_correct = rtf / 2;
      }

-      LIMIT(res_temp_fast, 1u, size);
-      LIMIT(res_temp_phase_correct, 1u, size);
+      LIMIT(res_temp_fast, 1U, size);
+      LIMIT(res_temp_phase_correct, 1U, size);
      // Calculate frequencies of test prescaler and resolution values
      const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
                f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
@@ -51,15 +51,15 @@
  #define AVR_SS_PIN   16
 #endif

-#ifndef SCK_PIN
-  #define SCK_PIN  AVR_SCK_PIN
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  AVR_SCK_PIN
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN AVR_MISO_PIN
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN AVR_MISO_PIN
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN AVR_MOSI_PIN
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN AVR_MOSI_PIN
 #endif
-#ifndef SS_PIN
-  #define SS_PIN   AVR_SS_PIN
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN   AVR_SS_PIN
 #endif
@@ -105,13 +105,15 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 //
 // ADC
 //
 extern uint16_t HAL_adc_result;     // result of last ADC conversion

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
+  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
 #endif

 #define HAL_ANALOG_SELECT(ch)
@@ -151,10 +153,16 @@ void HAL_init();
 //
 void _delay_ms(const int delay);

-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 #ifdef __cplusplus
  extern "C" {
@@ -69,10 +69,10 @@

  // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
  static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
    uint32_t idx = 0;

    /* Negate bout, as the assembler requires a negated value */
@@ -154,9 +154,9 @@
  static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
    uint32_t bin = 0;
    uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);

    /* The software SPI routine */
    __asm__ __volatile__(
@@ -225,15 +225,15 @@
  static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
    int bits = 8;
    do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
      b <<= 1;        // little setup time

-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
      DELAY_NS(125);  // 10 cycles @ 84mhz

-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);

-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
      DELAY_NS(125);  // 10 cycles @ 84mhz
    } while (--bits);
    return b;
@@ -245,15 +245,15 @@
  static uint8_t spiTransferX(uint8_t b) { // using Mode 0
    int bits = 8;
    do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
      b <<= 1; // little setup time

-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
      __delay_4cycles(spiDelayCyclesX4);

-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);

-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
      __delay_4cycles(spiDelayCyclesX4);
    } while (--bits);
    return b;
@@ -271,10 +271,10 @@

  // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
  static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
    uint32_t work = 0;
    uint32_t txval = 0;

@@ -352,9 +352,9 @@
  static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
    uint32_t bin = 0;
    uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);

    /* The software SPI routine */
    __asm__ __volatile__(
@@ -442,22 +442,22 @@
  static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;

  #if MB(ALLIGATOR)
-    #define _SS_WRITE(S) WRITE(SS_PIN, S)
+    #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
  #else
    #define _SS_WRITE(S) NOOP
  #endif

  void spiBegin() {
-    SET_OUTPUT(SS_PIN);
+    SET_OUTPUT(SD_SS_PIN);
    _SS_WRITE(HIGH);
-    SET_OUTPUT(SCK_PIN);
-    SET_INPUT(MISO_PIN);
-    SET_OUTPUT(MOSI_PIN);
+    SET_OUTPUT(SD_SCK_PIN);
+    SET_INPUT(SD_MISO_PIN);
+    SET_OUTPUT(SD_MOSI_PIN);
  }

  uint8_t spiRec() {
    _SS_WRITE(LOW);
-    WRITE(MOSI_PIN, HIGH); // Output 1s 1
+    WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
    uint8_t b = spiTransferRx(0xFF);
    _SS_WRITE(HIGH);
    return b;
@@ -466,7 +466,7 @@
  void spiRead(uint8_t* buf, uint16_t nbyte) {
    if (nbyte) {
      _SS_WRITE(LOW);
-      WRITE(MOSI_PIN, HIGH); // Output 1s 1
+      WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
      spiRxBlock(buf, nbyte);
      _SS_WRITE(HIGH);
    }
@@ -519,8 +519,8 @@
    }

    _SS_WRITE(HIGH);
-    WRITE(MOSI_PIN, HIGH);
-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_MOSI_PIN, HIGH);
+    WRITE(SD_SCK_PIN, LOW);
  }

  /** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,20 +575,20 @@

      // Configure SPI pins
      PIO_Configure(
-         g_APinDescription[SCK_PIN].pPort,
-         g_APinDescription[SCK_PIN].ulPinType,
-         g_APinDescription[SCK_PIN].ulPin,
-         g_APinDescription[SCK_PIN].ulPinConfiguration);
+         g_APinDescription[SD_SCK_PIN].pPort,
+         g_APinDescription[SD_SCK_PIN].ulPinType,
+         g_APinDescription[SD_SCK_PIN].ulPin,
+         g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
      PIO_Configure(
-         g_APinDescription[MOSI_PIN].pPort,
-         g_APinDescription[MOSI_PIN].ulPinType,
-         g_APinDescription[MOSI_PIN].ulPin,
-         g_APinDescription[MOSI_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MOSI_PIN].pPort,
+         g_APinDescription[SD_MOSI_PIN].ulPinType,
+         g_APinDescription[SD_MOSI_PIN].ulPin,
+         g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
      PIO_Configure(
-         g_APinDescription[MISO_PIN].pPort,
-         g_APinDescription[MISO_PIN].ulPinType,
-         g_APinDescription[MISO_PIN].ulPin,
-         g_APinDescription[MISO_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MISO_PIN].pPort,
+         g_APinDescription[SD_MISO_PIN].ulPinType,
+         g_APinDescription[SD_MISO_PIN].ulPin,
+         g_APinDescription[SD_MISO_PIN].ulPinConfiguration);

      // set master mode, peripheral select, fault detection
      SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
@@ -606,7 +606,7 @@
      WRITE(SPI_EEPROM1_CS, HIGH);
      WRITE(SPI_EEPROM2_CS, HIGH);
      WRITE(SPI_FLASH_CS, HIGH);
-      WRITE(SS_PIN, HIGH);
+      WRITE(SD_SS_PIN, HIGH);

      OUT_WRITE(SDSS, LOW);

@@ -64,12 +64,11 @@

 #include "../../../MarlinCore.h"

-void spiBegin();
-void spiInit(uint8_t spiRate);
-void spiSend(uint8_t b);
-void spiSend(const uint8_t* buf, size_t n);
+#ifndef LCD_SPI_SPEED
+  #define LCD_SPI_SPEED SPI_QUARTER_SPEED
+#endif

-#include "../../shared/Marduino.h"
+#include "../../shared/HAL_SPI.h"
 #include "../fastio.h"

 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
@@ -100,11 +99,7 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va

      spiBegin();

-      #ifndef SPI_SPEED
-        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
-      #endif
-      spiInit(2);
-
+      spiInit(LCD_SPI_SPEED);
      break;

    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -145,7 +145,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }

 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
  #include "../../shared/HAL_ST7920.h"

  #define ST7920_CS_PIN LCD_PINS_RS
@@ -59,9 +59,6 @@

 #if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)

-#undef SPI_SPEED
-#define SPI_SPEED 2  // About 2 MHz
-
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"

 #include "../../shared/Marduino.h"
@@ -60,7 +60,7 @@
 #define EEPROMSize     4096
 #define PagesPerGroup   128
 #define GroupCount        2
-#define PageSize        256u
+#define PageSize        256U

 /* Flash storage */
 typedef struct FLASH_SECTOR {
@@ -996,7 +996,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    uint8_t c = ee_Read(uint32_t(pos));
    if (writing) *value = c;
@@ -62,7 +62,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    uint8_t c = eeprom_read_byte((uint8_t*)pos);
    if (writing) *value = c;
@@ -163,6 +163,9 @@
 #define SET_INPUT(IO)        _SET_INPUT(IO)
 // Set pin as input with pullup (wrapper)
 #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
+// Set pin as input with pulldown (substitution)
+#define SET_INPUT_PULLDOWN   SET_INPUT
+
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
@@ -477,7 +480,7 @@
 #define DIO91_PIN 15
 #define DIO91_WPORT PIOB

-#if ARDUINO_SAM_ARCHIM
+#ifdef ARDUINO_SAM_ARCHIM

  #define DIO92_PIN 11
  #define DIO92_WPORT PIOC
@@ -154,7 +154,7 @@ void Stepper::digipot_init() {
  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
 }

-void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {

  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed

@@ -40,7 +40,7 @@
 * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
 * as the TMC2130 soft SPI the most common setup.
 */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
+#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))

 #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
  #if ENABLED(TMC_USE_SW_SPI)
@@ -43,22 +43,22 @@
    #define SPI_PIN         87
    #define SPI_CHAN         1
  #endif
-  #define SCK_PIN           76
-  #define MISO_PIN          74
-  #define MOSI_PIN          75
+  #define SD_SCK_PIN        76
+  #define SD_MISO_PIN       74
+  #define SD_MOSI_PIN       75
 #else
  // defaults
  #define DUE_SOFTWARE_SPI
-  #ifndef SCK_PIN
-    #define SCK_PIN           52
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN      52
  #endif
-  #ifndef MISO_PIN
-    #define MISO_PIN          50
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN     50
  #endif
-  #ifndef MOSI_PIN
-    #define MOSI_PIN          51
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN     51
  #endif
 #endif

 /* A.28, A.29, B.21, C.26, C.29 */
-#define SS_PIN            SDSS
+#define SD_SS_PIN         SDSS
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1ul << 31)) ?  0 : \
-                                ((u) & (1ul << 30)) ?  1 : \
-                                ((u) & (1ul << 29)) ?  2 : \
-                                ((u) & (1ul << 28)) ?  3 : \
-                                ((u) & (1ul << 27)) ?  4 : \
-                                ((u) & (1ul << 26)) ?  5 : \
-                                ((u) & (1ul << 25)) ?  6 : \
-                                ((u) & (1ul << 24)) ?  7 : \
-                                ((u) & (1ul << 23)) ?  8 : \
-                                ((u) & (1ul << 22)) ?  9 : \
-                                ((u) & (1ul << 21)) ? 10 : \
-                                ((u) & (1ul << 20)) ? 11 : \
-                                ((u) & (1ul << 19)) ? 12 : \
-                                ((u) & (1ul << 18)) ? 13 : \
-                                ((u) & (1ul << 17)) ? 14 : \
-                                ((u) & (1ul << 16)) ? 15 : \
-                                ((u) & (1ul << 15)) ? 16 : \
-                                ((u) & (1ul << 14)) ? 17 : \
-                                ((u) & (1ul << 13)) ? 18 : \
-                                ((u) & (1ul << 12)) ? 19 : \
-                                ((u) & (1ul << 11)) ? 20 : \
-                                ((u) & (1ul << 10)) ? 21 : \
-                                ((u) & (1ul <<  9)) ? 22 : \
-                                ((u) & (1ul <<  8)) ? 23 : \
-                                ((u) & (1ul <<  7)) ? 24 : \
-                                ((u) & (1ul <<  6)) ? 25 : \
-                                ((u) & (1ul <<  5)) ? 26 : \
-                                ((u) & (1ul <<  4)) ? 27 : \
-                                ((u) & (1ul <<  3)) ? 28 : \
-                                ((u) & (1ul <<  2)) ? 29 : \
-                                ((u) & (1ul <<  1)) ? 30 : \
+                                ((u) & (1UL << 31)) ?  0 : \
+                                ((u) & (1UL << 30)) ?  1 : \
+                                ((u) & (1UL << 29)) ?  2 : \
+                                ((u) & (1UL << 28)) ?  3 : \
+                                ((u) & (1UL << 27)) ?  4 : \
+                                ((u) & (1UL << 26)) ?  5 : \
+                                ((u) & (1UL << 25)) ?  6 : \
+                                ((u) & (1UL << 24)) ?  7 : \
+                                ((u) & (1UL << 23)) ?  8 : \
+                                ((u) & (1UL << 22)) ?  9 : \
+                                ((u) & (1UL << 21)) ? 10 : \
+                                ((u) & (1UL << 20)) ? 11 : \
+                                ((u) & (1UL << 19)) ? 12 : \
+                                ((u) & (1UL << 18)) ? 13 : \
+                                ((u) & (1UL << 17)) ? 14 : \
+                                ((u) & (1UL << 16)) ? 15 : \
+                                ((u) & (1UL << 15)) ? 16 : \
+                                ((u) & (1UL << 14)) ? 17 : \
+                                ((u) & (1UL << 13)) ? 18 : \
+                                ((u) & (1UL << 12)) ? 19 : \
+                                ((u) & (1UL << 11)) ? 20 : \
+                                ((u) & (1UL << 10)) ? 21 : \
+                                ((u) & (1UL <<  9)) ? 22 : \
+                                ((u) & (1UL <<  8)) ? 23 : \
+                                ((u) & (1UL <<  7)) ? 24 : \
+                                ((u) & (1UL <<  6)) ? 25 : \
+                                ((u) & (1UL <<  5)) ? 26 : \
+                                ((u) & (1UL <<  4)) ? 27 : \
+                                ((u) & (1UL <<  3)) ? 28 : \
+                                ((u) & (1UL <<  2)) ? 29 : \
+                                ((u) & (1UL <<  1)) ? 30 : \
                                31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
-                                (u) & (1ul <<  1) ?  1 : \
-                                (u) & (1ul <<  2) ?  2 : \
-                                (u) & (1ul <<  3) ?  3 : \
-                                (u) & (1ul <<  4) ?  4 : \
-                                (u) & (1ul <<  5) ?  5 : \
-                                (u) & (1ul <<  6) ?  6 : \
-                                (u) & (1ul <<  7) ?  7 : \
-                                (u) & (1ul <<  8) ?  8 : \
-                                (u) & (1ul <<  9) ?  9 : \
-                                (u) & (1ul << 10) ? 10 : \
-                                (u) & (1ul << 11) ? 11 : \
-                                (u) & (1ul << 12) ? 12 : \
-                                (u) & (1ul << 13) ? 13 : \
-                                (u) & (1ul << 14) ? 14 : \
-                                (u) & (1ul << 15) ? 15 : \
-                                (u) & (1ul << 16) ? 16 : \
-                                (u) & (1ul << 17) ? 17 : \
-                                (u) & (1ul << 18) ? 18 : \
-                                (u) & (1ul << 19) ? 19 : \
-                                (u) & (1ul << 20) ? 20 : \
-                                (u) & (1ul << 21) ? 21 : \
-                                (u) & (1ul << 22) ? 22 : \
-                                (u) & (1ul << 23) ? 23 : \
-                                (u) & (1ul << 24) ? 24 : \
-                                (u) & (1ul << 25) ? 25 : \
-                                (u) & (1ul << 26) ? 26 : \
-                                (u) & (1ul << 27) ? 27 : \
-                                (u) & (1ul << 28) ? 28 : \
-                                (u) & (1ul << 29) ? 29 : \
-                                (u) & (1ul << 30) ? 30 : \
-                                (u) & (1ul << 31) ? 31 : \
+#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
+                                (u) & (1UL <<  1) ?  1 : \
+                                (u) & (1UL <<  2) ?  2 : \
+                                (u) & (1UL <<  3) ?  3 : \
+                                (u) & (1UL <<  4) ?  4 : \
+                                (u) & (1UL <<  5) ?  5 : \
+                                (u) & (1UL <<  6) ?  6 : \
+                                (u) & (1UL <<  7) ?  7 : \
+                                (u) & (1UL <<  8) ?  8 : \
+                                (u) & (1UL <<  9) ?  9 : \
+                                (u) & (1UL << 10) ? 10 : \
+                                (u) & (1UL << 11) ? 11 : \
+                                (u) & (1UL << 12) ? 12 : \
+                                (u) & (1UL << 13) ? 13 : \
+                                (u) & (1UL << 14) ? 14 : \
+                                (u) & (1UL << 15) ? 15 : \
+                                (u) & (1UL << 16) ? 16 : \
+                                (u) & (1UL << 17) ? 17 : \
+                                (u) & (1UL << 18) ? 18 : \
+                                (u) & (1UL << 19) ? 19 : \
+                                (u) & (1UL << 20) ? 20 : \
+                                (u) & (1UL << 21) ? 21 : \
+                                (u) & (1UL << 22) ? 22 : \
+                                (u) & (1UL << 23) ? 23 : \
+                                (u) & (1UL << 24) ? 24 : \
+                                (u) & (1UL << 25) ? 25 : \
+                                (u) & (1UL << 26) ? 26 : \
+                                (u) & (1UL << 27) ? 27 : \
+                                (u) & (1UL << 28) ? 28 : \
+                                (u) & (1UL << 29) ? 29 : \
+                                (u) & (1UL << 30) ? 30 : \
+                                (u) & (1UL << 31) ? 31 : \
                                32)
 #endif
 #endif
@@ -84,7 +84,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
    card.getSd2Card().readData(sector_buf);

    // RAM -> USB
-    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
+    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
      card.getSd2Card().readStop();
      return CTRL_FAIL;
    }
@@ -120,7 +120,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
  while (nb_sector--) {

    // USB -> RAM
-    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
+    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
      card.getSd2Card().writeStop();
      return CTRL_FAIL;
    }
@@ -36,7 +36,7 @@ void watchdogSetup() {
  #if ENABLED(USE_WATCHDOG)

    // 4 seconds timeout
-    uint32_t timeout = 4000;
+    uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);

    // Calculate timeout value in WDT counter ticks: This assumes
    // the slow clock is running at 32.768 kHz watchdog
@@ -86,7 +86,7 @@ volatile int numPWMUsed = 0,

 #endif

-void HAL_init() { i2s_init(); }
+void HAL_init() { TERN_(I2S_STEPPER_STREAM, i2s_init()); }

 void HAL_init_board() {

@@ -96,12 +96,20 @@ void HAL_clear_reset_source();
 // reset reason
 uint8_t HAL_get_reset_source();

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 void _delay_ms(int delay);

-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 void analogWrite(pin_t pin, int value);

@@ -155,14 +163,14 @@ FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {

  if (stop >= start) {
    // no overflow, so only loop while in between start and stop:
-    // 0x00000000 -----------------start****stop-- 0xffffffff
+    // 0x00000000 -----------------start****stop-- 0xFFFFFFFF
    while (ccount >= start && ccount < stop) {
      __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
    }
  }
  else {
    // stop did overflow, so only loop while outside of stop and start:
-    // 0x00000000 **stop-------------------start** 0xffffffff
+    // 0x00000000 **stop-------------------start** 0xFFFFFFFF
    while (ccount >= start || ccount < stop) {
      __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
    }
@@ -53,11 +53,11 @@ static SPISettings spiConfig;
 // ------------------------

 void spiBegin() {
-  #if !PIN_EXISTS(SS)
-    #error "SS_PIN not defined!"
+  #if !PIN_EXISTS(SD_SS)
+    #error "SD_SS_PIN not defined!"
  #endif

-  OUT_WRITE(SS_PIN, HIGH);
+  OUT_WRITE(SD_SS_PIN, HIGH);
 }

 void spiInit(uint8_t spiRate) {
@@ -44,7 +44,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  for (size_t i = 0; i < size; i++) {
    uint8_t c = EEPROM.read(pos++);
    if (writing) value[i] = c;
@@ -52,6 +52,9 @@
 // Set pin as input with pullup wrapper
 #define SET_INPUT_PULLUP(IO)    do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)

+// Set pin as input with pulldown (substitution)
+#define SET_INPUT_PULLDOWN      SET_INPUT
+
 // Set pin as output wrapper
 #define SET_OUTPUT(IO)          do{ _SET_OUTPUT(IO); }while(0)

@@ -184,7 +184,7 @@ int i2s_init() {

  // Allocate the array of pointers to the buffers
  dma.buffers = (uint32_t **)malloc(sizeof(uint32_t*) * DMA_BUF_COUNT);
-  if (dma.buffers == nullptr) return -1;
+  if (!dma.buffers) return -1;

  // Allocate each buffer that can be used by the DMA controller
  for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
@@ -194,7 +194,7 @@ int i2s_init() {

  // Allocate the array of DMA descriptors
  dma.desc = (lldesc_t**) malloc(sizeof(lldesc_t*) * DMA_BUF_COUNT);
-  if (dma.desc == nullptr) return -1;
+  if (!dma.desc) return -1;

  // Allocate each DMA descriptor that will be used by the DMA controller
  for (int buf_idx = 0; buf_idx < DMA_BUF_COUNT; buf_idx++) {
@@ -18,7 +18,7 @@
 */
 #pragma once

-#define SS_PIN   SDSS
-#define SCK_PIN  18
-#define MISO_PIN 19
-#define MOSI_PIN 23
+#define SD_SS_PIN   SDSS
+#define SD_SCK_PIN  18
+#define SD_MISO_PIN 19
+#define SD_MOSI_PIN 23
@@ -24,15 +24,9 @@
 #include <stdint.h>
 #include <driver/timer.h>

-// Includes needed to get I2S_STEPPER_STREAM. Note that pins.h
-// is included in case this header is being included early.
-#include "../../inc/MarlinConfig.h"
-#include "../../pins/pins.h"
-
 // ------------------------
 // Defines
 // ------------------------
-//
 #define FORCE_INLINE __attribute__((always_inline)) inline

 typedef uint64_t hal_timer_t;
@@ -97,9 +91,11 @@ typedef uint64_t hal_timer_t;
  #define HAL_PWM_TIMER_ISR() extern "C" void pwmTC_Handler()
 #endif

-extern "C" void tempTC_Handler();
-extern "C" void stepTC_Handler();
-extern "C" void pwmTC_Handler();
+extern "C" {
+  void tempTC_Handler();
+  void stepTC_Handler();
+  void pwmTC_Handler();
+}

 // ------------------------
 // Types
@@ -25,6 +25,8 @@

 #if ENABLED(USE_WATCHDOG)

+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 #include "watchdog.h"

 void watchdogSetup() {
@@ -23,6 +23,10 @@

 #include "platforms.h"

+#ifndef GCC_VERSION
+  #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
+#endif
+
 #include HAL_PATH(.,HAL.h)

 #ifdef SERIAL_PORT_2
@@ -34,7 +38,7 @@
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)

 #ifndef I2C_ADDRESS
-  #define I2C_ADDRESS(A) (A)
+  #define I2C_ADDRESS(A) uint8_t(A)
 #endif

 // Needed for AVR sprintf_P PROGMEM extension
@@ -27,18 +27,13 @@
 HalSerial usb_serial;

 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//

 // return free heap space
@@ -23,7 +23,7 @@

 #define CPU_32_BIT

-#define F_CPU 100000000
+#define F_CPU 100000000UL
 #define SystemCoreClock F_CPU
 #include <iostream>
 #include <stdint.h>
@@ -79,10 +79,16 @@ extern HalSerial usb_serial;
 inline void HAL_init() {}

 // Utility functions
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 // ADC
 #define HAL_ADC_VREF           5.0
@@ -101,6 +107,8 @@ uint16_t HAL_adc_get_result();
 inline void HAL_clear_reset_source(void) {}
 inline uint8_t HAL_get_reset_source(void) { return RST_POWER_ON; }

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 /* ---------------- Delay in cycles */
 FORCE_INLINE static void DELAY_CYCLES(uint64_t x) {
  Clock::delayCycles(x);
@@ -40,7 +40,7 @@ size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
 bool PersistentStore::access_start() {
  const char eeprom_erase_value = 0xFF;
  FILE * eeprom_file = fopen(filename, "rb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;

  fseek(eeprom_file, 0L, SEEK_END);
  std::size_t file_size = ftell(eeprom_file);
@@ -59,7 +59,7 @@ bool PersistentStore::access_start() {

 bool PersistentStore::access_finish() {
  FILE * eeprom_file = fopen(filename, "wb");
-  if (eeprom_file == nullptr) return false;
+  if (!eeprom_file) return false;
  fwrite(buffer, sizeof(uint8_t), sizeof(buffer), eeprom_file);
  fclose(eeprom_file);
  return true;
@@ -78,7 +78,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return (bytes_written != size);  // return true for any error
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
  std::size_t bytes_read = 0;
  if (writing) {
    for (std::size_t i = 0; i < size; i++) {
@@ -86,10 +86,10 @@ public:
    GpioEvent::Type evt_type = value > 1 ? GpioEvent::SET_VALUE : value > pin_map[pin].value ? GpioEvent::RISE : value < pin_map[pin].value ? GpioEvent::FALL : GpioEvent::NOP;
    pin_map[pin].value = value;
    GpioEvent evt(Clock::nanos(), pin, evt_type);
-    if (pin_map[pin].cb != nullptr) {
+    if (pin_map[pin].cb) {
      pin_map[pin].cb->interrupt(evt);
    }
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
  }

  static uint16_t get(pin_type pin) {
@@ -105,8 +105,8 @@ public:
    if (!valid_pin(pin)) return;
    pin_map[pin].mode = value;
    GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETM);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
  }

  static uint8_t getMode(pin_type pin) {
@@ -118,8 +118,8 @@ public:
    if (!valid_pin(pin)) return;
    pin_map[pin].dir = value;
    GpioEvent evt(Clock::nanos(), pin, GpioEvent::Type::SETD);
-    if (pin_map[pin].cb != nullptr) pin_map[pin].cb->interrupt(evt);
-    if (Gpio::logger != nullptr) Gpio::logger->log(evt);
+    if (pin_map[pin].cb) pin_map[pin].cb->interrupt(evt);
+    if (Gpio::logger) Gpio::logger->log(evt);
  }

  static uint8_t getDir(pin_type pin) {
@@ -67,8 +67,11 @@ void cli(); // Disable
 void sei(); // Enable
 void attachInterrupt(uint32_t pin, void (*callback)(), uint32_t mode);
 void detachInterrupt(uint32_t pin);
-extern "C" void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
-extern "C" void GpioDisableInt(uint32_t port, uint32_t pin);
+
+extern "C" {
+  void GpioEnableInt(uint32_t port, uint32_t pin, uint32_t mode);
+  void GpioDisableInt(uint32_t port, uint32_t pin);
+}

 // Program Memory
 #define pgm_read_ptr(addr)        (*((void**)(addr)))
@@ -92,9 +95,7 @@ using std::memcpy;
 #define strlen_P strlen

 // Time functions
-extern "C" {
-  void delay(const int milis);
-}
+extern "C" void delay(const int milis);
 void _delay_ms(const int delay);
 void delayMicroseconds(unsigned long);
 uint32_t millis();
@@ -19,22 +19,23 @@
 */
 #ifdef __PLAT_LINUX__

-extern void setup();
-extern void loop();
-
-#include <thread>
-
-#include <iostream>
-#include <fstream>
+//#define GPIO_LOGGING // Full GPIO and Positional Logging

 #include "../../inc/MarlinConfig.h"
-#include <stdio.h>
-#include <stdarg.h>
 #include "../shared/Delay.h"
 #include "hardware/IOLoggerCSV.h"
 #include "hardware/Heater.h"
 #include "hardware/LinearAxis.h"

+#include <stdio.h>
+#include <stdarg.h>
+#include <thread>
+#include <iostream>
+#include <fstream>
+
+extern void setup();
+extern void loop();
+
 // simple stdout / stdin implementation for fake serial port
 void write_serial_thread() {
  for (;;) {
@@ -64,8 +65,6 @@ void simulation_loop() {
  LinearAxis z_axis(Z_ENABLE_PIN, Z_DIR_PIN, Z_STEP_PIN, Z_MIN_PIN, Z_MAX_PIN);
  LinearAxis extruder0(E0_ENABLE_PIN, E0_DIR_PIN, E0_STEP_PIN, P_NC, P_NC);

-  //#define GPIO_LOGGING // Full GPIO and Positional Logging
-
  #ifdef GPIO_LOGGING
    IOLoggerCSV logger("all_gpio_log.csv");
    Gpio::attachLogger(&logger);
@@ -88,7 +87,7 @@ void simulation_loop() {

    #ifdef GPIO_LOGGING
      if (x_axis.position != x || y_axis.position != y || z_axis.position != z) {
-        uint64_t update = MAX3(x_axis.last_update, y_axis.last_update, z_axis.last_update);
+        uint64_t update = _MAX(x_axis.last_update, y_axis.last_update, z_axis.last_update);
        position_log << update << ", " << x_axis.position << ", " << y_axis.position << ", " << z_axis.position << std::endl;
        position_log.flush();
        x = x_axis.position;
@@ -26,15 +26,15 @@
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define pwm_details(pin) pin = pin    // do nothing  // print PWM details
-#define pwm_status(pin) false //Print a pin's PWM status. Return true if it's currently a PWM pin.
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define pwm_details(pin)    NOOP          // (do nothing)
+#define pwm_status(pin)     false         // Print a pin's PWM status. Return true if it's currently a PWM pin.
+#define IS_ANALOG(P)        (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p)  digitalRead(p)
 #define PRINT_PORT(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
+#define GET_ARRAY_PIN(p)    pin_array[p].pin
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+#define PRINT_PIN(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define MULTI_NAME_PAD  16 // space needed to be pretty if not first name assigned to a pin

 // active ADC function/mode/code values for PINSEL registers
 constexpr int8_t ADC_pin_mode(pin_t pin) {
@@ -24,31 +24,32 @@
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"

-#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                            // needed due to the speed and mode required for communicating with each device being different.
                            // This requirement can be removed if the SPI access to these devices is updated to use
                            // spiBeginTransaction.
 #endif

-/** onboard SD card */
-//#define SCK_PIN           P0_07
-//#define MISO_PIN          P0_08
-//#define MOSI_PIN          P0_09
-//#define SS_PIN            P0_06
-/** external */
-#ifndef SCK_PIN
-  #define SCK_PIN           50
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+//#define SD_SS_PIN      P0_06
+
+// External SD
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN        50
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN          51
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN       51
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN          52
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN       52
 #endif
-#ifndef SS_PIN
-  #define SS_PIN            53
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN         53
 #endif
 #ifndef SDSS
-  #define SDSS              SS_PIN
+  #define SDSS       SD_SS_PIN
 #endif
@@ -27,6 +27,8 @@

 #include "watchdog.h"

+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {}
 void HAL_watchdog_refresh() {}

@@ -21,7 +21,5 @@
 */
 #pragma once

-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();
@@ -32,18 +32,13 @@
 uint32_t HAL_adc_reading = 0;

 // U8glib required functions
-extern "C" void u8g_xMicroDelay(uint16_t val) {
-  DELAY_US(val);
-}
-extern "C" void u8g_MicroDelay() {
-  u8g_xMicroDelay(1);
-}
-extern "C" void u8g_10MicroDelay() {
-  u8g_xMicroDelay(10);
-}
-extern "C" void u8g_Delay(uint16_t val) {
-  delay(val);
+extern "C" {
+  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
+  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
+  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
+  void u8g_Delay(uint16_t val)       { delay(val); }
 }
+
 //************************//

 // return free heap space
@@ -47,9 +47,6 @@ extern "C" volatile uint32_t _millis;
 #include <pinmapping.h>
 #include <CDCSerial.h>

-// i2c uses 8-bit shifted address
-#define I2C_ADDRESS(A) uint8_t((A) << 1)
-
 //
 // Default graphical display delays
 //
@@ -107,10 +104,16 @@ extern "C" volatile uint32_t _millis;
 //
 // Utility functions
 //
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 //
 // ADC API
@@ -200,7 +203,17 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255,
 void HAL_clear_reset_source(void);
 uint8_t HAL_get_reset_source(void);

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 // Add strcmp_P if missing
 #ifndef strcmp_P
  #define strcmp_P(a, b) strcmp((a), (b))
 #endif
+
+#ifndef strcat_P
+  #define strcat_P(a, b) strcat((a), (b))
+#endif
+
+#ifndef strcpy_P
+  #define strcpy_P(a, b) strcpy((a), (b))
+#endif
@@ -55,27 +55,33 @@
 #include <lpc17xx_pinsel.h>
 #include <lpc17xx_clkpwr.h>

+#include "../shared/HAL_SPI.h"
+
 // ------------------------
 // Public functions
 // ------------------------
 #if ENABLED(LPC_SOFTWARE_SPI)

-  #include <SoftwareSPI.h>
-
  // Software SPI

-  static uint8_t SPI_speed = 0;
+  #include <SoftwareSPI.h>
+
+  #ifndef HAL_SPI_SPEED
+    #define HAL_SPI_SPEED SPI_FULL_SPEED
+  #endif
+
+  static uint8_t SPI_speed = HAL_SPI_SPEED;

  static uint8_t spiTransfer(uint8_t b) {
-    return swSpiTransfer(b, SPI_speed, SCK_PIN, MISO_PIN, MOSI_PIN);
+    return swSpiTransfer(b, SPI_speed, SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
  }

  void spiBegin() {
-    swSpiBegin(SCK_PIN, MISO_PIN, MOSI_PIN);
+    swSpiBegin(SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
  }

  void spiInit(uint8_t spiRate) {
-    SPI_speed = swSpiInit(spiRate, SCK_PIN, MOSI_PIN);
+    SPI_speed = swSpiInit(spiRate, SD_SCK_PIN, SD_MOSI_PIN);
  }

  uint8_t spiRec() { return spiTransfer(0xFF); }
@@ -100,14 +106,20 @@

 #else

-  void spiBegin() {  // setup SCK, MOSI & MISO pins for SSP0
-    spiInit(SPI_SPEED);
-  }
+  #ifndef HAL_SPI_SPEED
+    #ifdef SD_SPI_SPEED
+      #define HAL_SPI_SPEED SD_SPI_SPEED
+    #else
+      #define HAL_SPI_SPEED SPI_FULL_SPEED
+    #endif
+  #endif
+
+  void spiBegin() { spiInit(HAL_SPI_SPEED); } // Set up SCK, MOSI & MISO pins for SSP0

  void spiInit(uint8_t spiRate) {
-    #if MISO_PIN == BOARD_SPI1_MISO_PIN
+    #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
      SPI.setModule(1);
-    #elif MISO_PIN == BOARD_SPI2_MISO_PIN
+    #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
      SPI.setModule(2);
    #endif
    SPI.setDataSize(DATA_SIZE_8BIT);
@@ -127,11 +139,9 @@
    for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
  }

-  void spiSend(uint32_t chan, byte b) {
-  }
+  void spiSend(uint32_t chan, byte b) {}

-  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
-  }
+  void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {}

  // Read single byte from SPI
  uint8_t spiRec() { return doio(0xFF); }
@@ -143,9 +153,7 @@
    for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
  }

-  uint8_t spiTransfer(uint8_t b) {
-    return doio(b);
-  }
+  uint8_t spiTransfer(uint8_t b) { return doio(b); }

  // Write from buffer to SPI
  void spiSendBlock(uint8_t token, const uint8_t* buf) {
@@ -154,10 +162,9 @@
      (void)spiTransfer(buf[i]);
  }

-  /** Begin SPI transaction, set clock, bit order, data mode */
+  // Begin SPI transaction, set clock, bit order, data mode
  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
-    // TODO: to be implemented
-
+    // TODO: Implement this method
  }

 #endif // LPC_SOFTWARE_SPI
@@ -201,6 +208,15 @@ SPIClass::SPIClass(uint8_t device) {
  GPDMA_Init();
 }

+SPIClass::SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel) {
+  #if BOARD_NR_SPI >= 1
+    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
+  #endif
+  #if BOARD_NR_SPI >= 2
+    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
+  #endif
+}
+
 void SPIClass::begin() {
  // Init the SPI pins in the first begin call
  if ((_currentSetting->spi_d == LPC_SSP0 && spiInitialised[0] == false) ||
@@ -263,8 +279,9 @@ uint16_t SPIClass::transfer16(const uint16_t data) {
 }

 void SPIClass::end() {
-  // SSP_Cmd(_currentSetting->spi_d, DISABLE);  // stop device or SSP_DeInit?
-  SSP_DeInit(_currentSetting->spi_d);
+  // Neither is needed for Marlin
+  //SSP_Cmd(_currentSetting->spi_d, DISABLE);
+  //SSP_DeInit(_currentSetting->spi_d);
 }

 void SPIClass::send(uint8_t data) {
@@ -330,25 +347,15 @@ void SPIClass::read(uint8_t *buf, uint32_t len) {
  for (uint16_t i = 0; i < len; i++) buf[i] = transfer(0xFF);
 }

-void SPIClass::setClock(uint32_t clock) {
-  _currentSetting->clock = clock;
-}
+void SPIClass::setClock(uint32_t clock) { _currentSetting->clock = clock; }

-void SPIClass::setModule(uint8_t device) {
-  _currentSetting = &_settings[device - 1];// SPI channels are called 1 2 and 3 but the array is zero indexed
-}
+void SPIClass::setModule(uint8_t device) { _currentSetting = &_settings[device - 1]; } // SPI channels are called 1, 2, and 3 but the array is zero-indexed

-void SPIClass::setBitOrder(uint8_t bitOrder) {
-  _currentSetting->bitOrder = bitOrder;
-}
+void SPIClass::setBitOrder(uint8_t bitOrder) { _currentSetting->bitOrder = bitOrder; }

-void SPIClass::setDataMode(uint8_t dataMode) {
-  _currentSetting->dataMode = dataMode;
-}
+void SPIClass::setDataMode(uint8_t dataMode) { _currentSetting->dataMode = dataMode; }

-void SPIClass::setDataSize(uint32_t ds) {
-  _currentSetting->dataSize = ds;
-}
+void SPIClass::setDataSize(uint32_t dataSize) { _currentSetting->dataSize = dataSize; }

 /**
 * Set up/tear down
@@ -356,8 +363,8 @@ void SPIClass::setDataSize(uint32_t ds) {
 void SPIClass::updateSettings() {
  //SSP_DeInit(_currentSetting->spi_d); //todo: need force de init?!

-  // divide PCLK by 2 for SSP0
-  CLKPWR_SetPCLKDiv(_currentSetting->spi_d == LPC_SSP0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);
+  // Divide PCLK by 2 for SSP0
+  //CLKPWR_SetPCLKDiv(_currentSetting->spi_d == LPC_SSP0 ? CLKPWR_PCLKSEL_SSP0 : CLKPWR_PCLKSEL_SSP1, CLKPWR_PCLKSEL_CCLK_DIV_2);

  SSP_CFG_Type HW_SPI_init; // data structure to hold init values
  SSP_ConfigStructInit(&HW_SPI_init);  // set values for SPI mode
@@ -396,9 +403,9 @@ void SPIClass::updateSettings() {
  SSP_Init(_currentSetting->spi_d, &HW_SPI_init);  // puts the values into the proper bits in the SSP0 registers
 }

-#if MISO_PIN == BOARD_SPI1_MISO_PIN
+#if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
  SPIClass SPI(1);
-#elif MISO_PIN == BOARD_SPI2_MISO_PIN
+#elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
  SPIClass SPI(2);
 #endif

@@ -0,0 +1,45 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+/**
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
+
+using MarlinSPI = SPIClass;
@@ -26,30 +26,19 @@

 #if USING_SERIAL_0
  MarlinSerial MSerial(LPC_UART0);
-  extern "C" void UART0_IRQHandler() {
-    MSerial.IRQHandler();
-  }
+  extern "C" void UART0_IRQHandler() { MSerial.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_1
  MarlinSerial MSerial1((LPC_UART_TypeDef *) LPC_UART1);
-  extern "C" void UART1_IRQHandler() {
-    MSerial1.IRQHandler();
-  }
+  extern "C" void UART1_IRQHandler() { MSerial1.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_2
  MarlinSerial MSerial2(LPC_UART2);
-  extern "C" void UART2_IRQHandler() {
-    MSerial2.IRQHandler();
-  }
+  extern "C" void UART2_IRQHandler() { MSerial2.IRQHandler(); }
 #endif
-
 #if USING_SERIAL_3
  MarlinSerial MSerial3(LPC_UART3);
-  extern "C" void UART3_IRQHandler() {
-    MSerial3.IRQHandler();
-  }
+  extern "C" void UART3_IRQHandler() { MSerial3.IRQHandler(); }
 #endif

 #endif // TARGET_LPC1768
@@ -119,7 +119,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;  // return true for any error
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  const uint8_t * const buff = writing ? &value[0] : &ram_eeprom[pos];
  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[pos + i];
  crc16(crc, buff, size);
@@ -143,7 +143,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return bytes_written != size;  // return true for any error
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
  if (!eeprom_file_open) return true;
  UINT bytes_read = 0;
  FRESULT s;
@@ -64,7 +64,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from external EEPROM
    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
@@ -46,79 +46,79 @@ void setup_endstop_interrupts() {

  #if HAS_X_MAX
    #if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
-      #error "X_MAX_PIN is not INTERRUPT-capable."
+      #error "X_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(X_MAX_PIN);
  #endif
  #if HAS_X_MIN
    #if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN)
-      #error "X_MIN_PIN is not INTERRUPT-capable."
+      #error "X_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(X_MIN_PIN);
  #endif
  #if HAS_Y_MAX
    #if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN)
-      #error "Y_MAX_PIN is not INTERRUPT-capable."
+      #error "Y_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Y_MAX_PIN);
  #endif
  #if HAS_Y_MIN
    #if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN)
-      #error "Y_MIN_PIN is not INTERRUPT-capable."
+      #error "Y_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Y_MIN_PIN);
  #endif
  #if HAS_Z_MAX
    #if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN)
-      #error "Z_MAX_PIN is not INTERRUPT-capable."
+      #error "Z_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z_MAX_PIN);
  #endif
  #if HAS_Z_MIN
    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
-      #error "Z_MIN_PIN is not INTERRUPT-capable."
+      #error "Z_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
     _ATTACH(Z_MIN_PIN);
  #endif
  #if HAS_Z2_MAX
    #if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
-      #error "Z2_MAX_PIN is not INTERRUPT-capable."
+      #error "Z2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z2_MAX_PIN);
  #endif
  #if HAS_Z2_MIN
    #if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN)
-      #error "Z2_MIN_PIN is not INTERRUPT-capable."
+      #error "Z2_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z2_MIN_PIN);
  #endif
  #if HAS_Z3_MAX
    #if !LPC1768_PIN_INTERRUPT_M(Z3_MAX_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable."
+      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z3_MAX_PIN);
  #endif
  #if HAS_Z3_MIN
    #if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable."
+      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z3_MIN_PIN);
  #endif
  #if HAS_Z4_MAX
    #if !LPC1768_PIN_INTERRUPT_M(Z4_MAX_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable."
+      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z4_MAX_PIN);
  #endif
  #if HAS_Z4_MIN
    #if !LPC1768_PIN_INTERRUPT_M(Z4_MIN_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable."
+      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z4_MIN_PIN);
  #endif
  #if HAS_Z_MIN_PROBE_PIN
    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN)
-      #error "Z_MIN_PROBE_PIN is not INTERRUPT-capable."
+      #error "Z_MIN_PROBE_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
    #endif
    _ATTACH(Z_MIN_PROBE_PIN);
  #endif
@@ -24,10 +24,3 @@
 #if HAS_FSMC_TFT
  #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
 #endif
-
-// This emulated DOGM has 'touch/xpt2046', not 'tft/xpt2046'
-#if ENABLED(TOUCH_SCREEN) && !HAS_GRAPHICAL_TFT
-  #undef TOUCH_SCREEN
-  #undef TOUCH_SCREEN_CALIBRATION
-  #define HAS_TOUCH_XPT2046 1
-#endif
@@ -20,3 +20,7 @@
 *
 */
 #pragma once
+
+#if DISABLED(NO_SD_HOST_DRIVE)
+  #define HAS_SD_HOST_DRIVE 1
+#endif
@@ -24,7 +24,7 @@
 #if PIO_PLATFORM_VERSION < 1001
  #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
 #endif
-#if PIO_FRAMEWORK_VERSION < 2005
+#if PIO_FRAMEWORK_VERSION < 2006
  #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
 #endif

@@ -72,7 +72,7 @@ static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are in
 //#endif

 #if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
+  #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
    #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
  #endif
 #endif
@@ -97,8 +97,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
  #define IS_RX0(P) (P == P0_03)
  #if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
    #error "Serial port pins (0) conflict with Trinamic SPI pins!"
-  #elif ENABLED(MK2_MULTIPLEXER) && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN))
-    #error "Serial port pins (0) conflict with MK2 multiplexer pins!"
+  #elif HAS_PRUSA_MMU1 && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN))
+    #error "Serial port pins (0) conflict with Multi-Material-Unit multiplexer pins!"
  #elif (AXIS_HAS_SPI(X) && IS_TX0(X_CS_PIN)) || (AXIS_HAS_SPI(Y) && IS_RX0(Y_CS_PIN))
    #error "Serial port pins (0) conflict with X/Y axis SPI pins!"
  #endif
@@ -116,8 +116,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
  #elif HAS_WIRED_LCD
    #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
      #error "Serial port pins (1) conflict with Encoder Buttons!"
-    #elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \
-       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, MISO_PIN, DOGLCD_A0, SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
+    #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \
+       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
      #error "Serial port pins (1) conflict with LCD pins!"
    #endif
  #endif
@@ -191,7 +191,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
 //
 // Flag any i2c pin conflicts
 //
-#if ANY(HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
+#if ANY(HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
  #define USEDI2CDEV_M 1  // <Arduino>/Wire.cpp

  #if USEDI2CDEV_M == 0         // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)
@@ -205,8 +205,8 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
      #error "SDA0 overlaps with BEEPER_PIN!"
    #elif IS_SCL0(BTN_ENC)
      #error "SCL0 overlaps with Encoder Button!"
-    #elif IS_SCL0(SS_PIN)
-      #error "SCL0 overlaps with SS_PIN!"
+    #elif IS_SCL0(SD_SS_PIN)
+      #error "SCL0 overlaps with SD_SS_PIN!"
    #elif IS_SCL0(LCD_SDSS)
      #error "SCL0 overlaps with LCD_SDSS!"
    #endif
@@ -37,13 +37,14 @@
 #define DATA_SIZE_8BIT SSP_DATABIT_8
 #define DATA_SIZE_16BIT SSP_DATABIT_16

-#define SPI_CLOCK_DIV2   8333333 //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
-#define SPI_CLOCK_DIV4   4166667 //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
-#define SPI_CLOCK_DIV8   2083333 //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
-#define SPI_CLOCK_DIV16  1000000 //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
-#define SPI_CLOCK_DIV32   500000 //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
-#define SPI_CLOCK_DIV64   250000 //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
-#define SPI_CLOCK_DIV128  125000 //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
+#define SPI_CLOCK_MAX_TFT  30000000UL
+#define SPI_CLOCK_DIV2     8333333 //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
+#define SPI_CLOCK_DIV4     4166667 //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
+#define SPI_CLOCK_DIV8     2083333 //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
+#define SPI_CLOCK_DIV16    1000000 //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
+#define SPI_CLOCK_DIV32     500000 //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
+#define SPI_CLOCK_DIV64     250000 //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
+#define SPI_CLOCK_DIV128    125000 //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h

 #define SPI_CLOCK_MAX SPI_CLOCK_DIV2

@@ -125,6 +126,11 @@ public:
   */
  SPIClass(uint8_t spiPortNumber);

+  /**
+   * Init using pins
+   */
+  SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)-1);
+
  /**
   * Select and configure the current selected SPI device to use
   */
@@ -31,17 +31,18 @@
 #include <CDCSerial.h>
 #include <usb/mscuser.h>

-extern "C" {
-  #include <debug_frmwrk.h>
-}
-
-#include "../../sd/cardreader.h"
 #include "../../inc/MarlinConfig.h"
 #include "../../core/millis_t.h"

+#include "../../sd/cardreader.h"
+
 extern uint32_t MSC_SD_Init(uint8_t pdrv);
-extern "C" int isLPC1769();
-extern "C" void disk_timerproc();
+
+extern "C" {
+  #include <debug_frmwrk.h>
+  extern "C" int isLPC1769();
+  extern "C" void disk_timerproc();
+}

 void SysTick_Callback() { disk_timerproc(); }

@@ -89,11 +90,11 @@ void HAL_init() {
  //debug_frmwrk_init();
  //_DBG("\n\nDebug running\n");
  // Initialize the SD card chip select pins as soon as possible
-  #if PIN_EXISTS(SS)
-    OUT_WRITE(SS_PIN, HIGH);
+  #if PIN_EXISTS(SD_SS)
+    OUT_WRITE(SD_SS_PIN, HIGH);
  #endif

-  #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SS_PIN
+  #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SD_SS_PIN
    OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
  #endif

@@ -122,7 +123,7 @@ void HAL_init() {
  delay(1000);                              // Give OS time to notice
  USB_Connect(TRUE);

-  #if DISABLED(NO_SD_HOST_DRIVE)
+  #if HAS_SD_HOST_DRIVE
    MSC_SD_Init(0);                         // Enable USB SD card access
  #endif

@@ -23,7 +23,7 @@

 #include "../../core/macros.h"

-#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                            // needed due to the speed and mode required for communicating with each device being different.
                            // This requirement can be removed if the SPI access to these devices is updated to use
@@ -31,24 +31,24 @@
 #endif

 /** onboard SD card */
-//#define SCK_PIN           P0_07
-//#define MISO_PIN          P0_08
-//#define MOSI_PIN          P0_09
-//#define SS_PIN            P0_06
+//#define SD_SCK_PIN        P0_07
+//#define SD_MISO_PIN       P0_08
+//#define SD_MOSI_PIN       P0_09
+//#define SD_SS_PIN         P0_06
 /** external */
-#ifndef SCK_PIN
-  #define SCK_PIN           P0_15
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN        P0_15
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN          P0_17
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN       P0_17
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN          P0_18
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN       P0_18
 #endif
-#ifndef SS_PIN
-  #define SS_PIN            P1_23
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN         P1_23
 #endif
 #if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h
  #undef SDSS
-  #define SDSS              SS_PIN
+  #define SDSS          SD_SS_PIN
 #endif
@@ -89,7 +89,7 @@ void TFT_SPI::Init() {
  #elif TFT_MISO_PIN == BOARD_SPI2_MISO_PIN
    SPIx.setModule(2);
  #endif
-  SPIx.setClock(SPI_CLOCK_MAX);
+  SPIx.setClock(SPI_CLOCK_MAX_TFT);
  SPIx.setBitOrder(MSBFIRST);
  SPIx.setDataMode(SPI_MODE0);
 }
@@ -125,7 +125,7 @@ uint32_t TFT_SPI::ReadID(uint16_t Reg) {
    }

    DataTransferEnd();
-    SPIx.setClock(SPI_CLOCK_MAX);
+    SPIx.setClock(SPI_CLOCK_MAX_TFT);
  #endif

  return data >> 7;
@@ -36,7 +36,7 @@

 #define DATASIZE_8BIT    SSP_DATABIT_8
 #define DATASIZE_16BIT   SSP_DATABIT_16
-#define TFT_IO TFT_SPI
+#define TFT_IO_DRIVER TFT_SPI

 #define DMA_MINC_ENABLE 1
 #define DMA_MINC_DISABLE 0
@@ -1,6 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -19,7 +22,7 @@

 #include "../../../inc/MarlinConfig.h"

-#if HAS_TFT_XPT2046 || HAS_TOUCH_XPT2046
+#if HAS_TFT_XPT2046 || HAS_TOUCH_BUTTONS

 #include "xpt2046.h"
 #include <SPI.h>
@@ -1,6 +1,9 @@
 /**
 * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
@@ -25,16 +28,16 @@
 #endif

 #ifndef TOUCH_MISO_PIN
-  #define TOUCH_MISO_PIN MISO_PIN
+  #define TOUCH_MISO_PIN SD_MISO_PIN
 #endif
 #ifndef TOUCH_MOSI_PIN
-  #define TOUCH_MOSI_PIN MOSI_PIN
+  #define TOUCH_MOSI_PIN SD_MOSI_PIN
 #endif
 #ifndef TOUCH_SCK_PIN
-  #define TOUCH_SCK_PIN  SCK_PIN
+  #define TOUCH_SCK_PIN  SD_SCK_PIN
 #endif
 #ifndef TOUCH_CS_PIN
-  #define TOUCH_CS_PIN   CS_PIN
+  #define TOUCH_CS_PIN   SD_SS_PIN
 #endif
 #ifndef TOUCH_INT_PIN
  #define TOUCH_INT_PIN  -1
@@ -62,10 +62,13 @@
 #include <U8glib.h>
 #include "../../shared/HAL_SPI.h"

-void spiBegin();
-void spiInit(uint8_t spiRate);
-void spiSend(uint8_t b);
-void spiSend(const uint8_t* buf, size_t n);
+#ifndef LCD_SPI_SPEED
+  #ifdef SD_SPI_SPEED
+    #define LCD_SPI_SPEED SD_SPI_SPEED    // Assume SPI speed shared with SD
+  #else
+    #define LCD_SPI_SPEED SPI_FULL_SPEED  // Use full speed if SD speed is not supplied
+  #endif
+#endif

 uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
  switch (msg) {
@@ -81,10 +84,7 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
      u8g_SetPIOutput(u8g, U8G_PI_RESET);
      u8g_Delay(5);
      spiBegin();
-      #ifndef SPI_SPEED
-        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
-      #endif
-      spiInit(SPI_SPEED);
+      spiInit(LCD_SPI_SPEED);
      break;

    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -62,9 +62,11 @@
 #include <U8glib.h>
 #include <SoftwareSPI.h>
 #include "../../shared/Delay.h"
+#include "../../shared/HAL_SPI.h"

-#undef SPI_SPEED
-#define SPI_SPEED 3  // About 1 MHz
+#ifndef LCD_SPI_SPEED
+  #define LCD_SPI_SPEED SPI_EIGHTH_SPEED  // About 1 MHz
+#endif

 static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
 static uint8_t SPI_speed = 0;
@@ -92,7 +94,7 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
      u8g_SetPIOutput(u8g, U8G_PI_MOSI);
      u8g_Delay(5);

-      SPI_speed = swSpiInit(SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);
+      SPI_speed = swSpiInit(LCD_SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);

      u8g_SetPILevel(u8g, U8G_PI_CS, 0);
      u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
@@ -60,9 +60,11 @@
 #if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)

 #include <SoftwareSPI.h>
+#include "../../shared/HAL_SPI.h"

-#undef SPI_SPEED
-#define SPI_SPEED 2  // About 2 MHz
+#ifndef LCD_SPI_SPEED
+  #define LCD_SPI_SPEED SPI_QUARTER_SPEED  // About 2 MHz
+#endif

 #include <Arduino.h>
 #include <algorithm>
@@ -145,7 +147,7 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
      u8g_SetPIOutput(u8g, U8G_PI_CS);
      u8g_SetPIOutput(u8g, U8G_PI_A0);
      if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET);
-      SPI_speed = swSpiInit(SPI_SPEED, u8g->pin_list[U8G_PI_SCK], u8g->pin_list[U8G_PI_MOSI]);
+      SPI_speed = swSpiInit(LCD_SPI_SPEED, u8g->pin_list[U8G_PI_SCK], u8g->pin_list[U8G_PI_MOSI]);
      u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
      u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
      break;
@@ -23,63 +23,50 @@ def print_error(e):
 		  %(e, env.get('PIOENV')))

 try:
+	#
+	# Find a disk for upload
+	#
+	upload_disk = 'Disk not found'
+	target_file_found = False
+	target_drive_found = False
 	if current_OS == 'Windows':
 		#
 		# platformio.ini will accept this for a Windows upload port designation: 'upload_port = L:'
 		#   Windows - doesn't care about the disk's name, only cares about the drive letter
-		#
-
-		#
-		# get all drives on this computer
-		#
 		import subprocess
-		# typical result (string): 'Drives: C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
-		driveStr = str(subprocess.check_output("fsutil fsinfo drives"))
-		# typical result (string): 'C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
-		# driveStr = driveStr.strip().lstrip('Drives: ') <- Doesn't work in other Languages as English. In German is "Drives:" = "Laufwerke:"
-		FirstFound = driveStr.find(':',0,-1)         # Find the first ":" and
-		driveStr = driveStr[FirstFound + 1 : -1]     # truncate to the rest
-		# typical result (array of stings): ['C:\\', 'D:\\', 'E:\\', 'F:\\',
-		# 'G:\\', 'H:\\', 'I:\\', 'J:\\', 'K:\\', 'L:\\', 'M:\\', 'Y:\\', 'Z:\\']
-		drives = driveStr.split()
+		from ctypes import windll
+		import string
+
+		# getting list of drives
+		# https://stackoverflow.com/questions/827371/is-there-a-way-to-list-all-the-available-drive-letters-in-python
+		drives = []
+		bitmask = windll.kernel32.GetLogicalDrives()
+		for letter in string.ascii_uppercase:
+			if bitmask & 1:
+				drives.append(letter)
+			bitmask >>= 1

-		upload_disk = 'Disk not found'
-		target_file_found = False
-		target_drive_found = False
 		for drive in drives:
-			final_drive_name = drive.strip().rstrip('\\')   # typical result (string): 'C:'
+			final_drive_name = drive + ':\\'
+			# print ('disc check: {}'.format(final_drive_name))
 			try:
 				volume_info = str(subprocess.check_output('cmd /C dir ' + final_drive_name, stderr=subprocess.STDOUT))
 			except Exception as e:
+				print ('error:{}'.format(e))
 				continue
 			else:
-				if target_drive in volume_info and target_file_found == False:  # set upload if not found target file yet
+				if target_drive in volume_info and not target_file_found:  # set upload if not found target file yet
 					target_drive_found = True
 					upload_disk = final_drive_name
 				if target_filename in volume_info:
-					if target_file_found == False:
+					if not target_file_found:
 						upload_disk = final_drive_name
 					target_file_found = True

-		#
-		# set upload_port to drive if found
-		#
-
-		if target_file_found == True or target_drive_found == True:
-			env.Replace(
-				UPLOAD_PORT=upload_disk
-			)
-			print('upload disk: ', upload_disk)
-		else:
-			print_error('Autodetect Error')
-
 	elif current_OS == 'Linux':
 		#
 		# platformio.ini will accept this for a Linux upload port designation: 'upload_port = /media/media_name/drive'
 		#
-		upload_disk = 'Disk not found'
-		target_file_found = False
-		target_drive_found = False
 		drives = os.listdir(os.path.join(os.sep, 'media', getpass.getuser()))
 		if target_drive in drives:  # If target drive is found, use it.
 			target_drive_found = True
@@ -101,22 +88,15 @@ try:

 		if target_file_found or target_drive_found:
 			env.Replace(
-				UPLOAD_FLAGS="-P$UPLOAD_PORT",
-				UPLOAD_PORT=upload_disk
+				UPLOAD_FLAGS="-P$UPLOAD_PORT"
 			)
-			print('upload disk: ', upload_disk)
-		else:
-			print_error('Autodetect Error')

 	elif current_OS == 'Darwin':  # MAC
 		#
 		# platformio.ini will accept this for a OSX upload port designation: 'upload_port = /media/media_name/drive'
 		#
-		upload_disk = 'Disk not found'
 		drives = os.listdir('/Volumes')  # human readable names
-		target_file_found = False
-		target_drive_found = False
-		if target_drive in drives and target_file_found == False:  # set upload if not found target file yet
+		if target_drive in drives and not target_file_found:  # set upload if not found target file yet
 			target_drive_found = True
 			upload_disk = '/Volumes/' + target_drive + '/'
 		for drive in drives:
@@ -126,20 +106,18 @@ try:
 				continue
 			else:
 				if target_filename in filenames:
-					if target_file_found == False:
+					if not target_file_found:
 						upload_disk = '/Volumes/' + drive + '/'
 					target_file_found = True
-		#
-		# set upload_port to drive if found
-		#

-		if target_file_found == True or target_drive_found == True:
-			env.Replace(
-				UPLOAD_PORT=upload_disk
-			)
-			print('\nupload disk: ', upload_disk, '\n')
-		else:
-			print_error('Autodetect Error')
+	#
+	# Set upload_port to drive if found
+	#
+	if target_file_found or target_drive_found:
+		env.Replace(UPLOAD_PORT=upload_disk)
+		print('\nUpload disk: ', upload_disk, '\n')
+	else:
+		print_error('Autodetect Error')

 except Exception as e:
 	print_error(str(e))
@@ -28,6 +28,8 @@
 #include <lpc17xx_wdt.h>
 #include "watchdog.h"

+#define WDT_TIMEOUT_US TERN(WATCHDOG_DURATION_8S, 8000000, 4000000) // 4 or 8 second timeout
+
 void watchdog_init() {
  #if ENABLED(WATCHDOG_RESET_MANUAL)
    // We enable the watchdog timer, but only for the interrupt.
@@ -52,7 +54,7 @@ void watchdog_init() {
  #else
    WDT_Init(WDT_CLKSRC_IRC, WDT_MODE_RESET);
  #endif
-  WDT_Start(WDT_TIMEOUT);
+  WDT_Start(WDT_TIMEOUT_US);
 }

 void HAL_watchdog_refresh() {
@@ -21,8 +21,6 @@
 */
 #pragma once

-#define WDT_TIMEOUT   4000000 // 4 second timeout
-
 void watchdog_init();
 void HAL_watchdog_refresh();

@@ -300,7 +300,7 @@ uint16_t HAL_adc_result;
          DMA_ADDRESS_INCREMENT_STEP_SIZE_1,  // STEPSIZE
          DMA_STEPSEL_SRC                     // STEPSEL
        );
-        if (descriptor != nullptr)
+        if (descriptor)
          descriptor->BTCTRL.bit.EVOSEL = DMA_EVENT_OUTPUT_BEAT;
        adc0DMAProgram.startJob();
      }
@@ -337,7 +337,7 @@ uint16_t HAL_adc_result;
          DMA_ADDRESS_INCREMENT_STEP_SIZE_1,  // STEPSIZE
          DMA_STEPSEL_SRC                     // STEPSEL
        );
-        if (descriptor != nullptr)
+        if (descriptor)
          descriptor->BTCTRL.bit.EVOSEL = DMA_EVENT_OUTPUT_BEAT;
        adc1DMAProgram.startJob();
      }
@@ -35,7 +35,8 @@

  // MYSERIAL0 required before MarlinSerial includes!

-  #define _MSERIAL(X) Serial##X
+  #define __MSERIAL(X) Serial##X
+  #define _MSERIAL(X) __MSERIAL(X)
  #define MSERIAL(X) _MSERIAL(INCREMENT(X))

  #if SERIAL_PORT == -1
@@ -88,6 +89,8 @@ typedef int8_t pin_t;
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 //
 // ADC
 //
@@ -132,10 +135,16 @@ void HAL_idletask();
 //
 FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }

-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif

 #ifdef __cplusplus
  extern "C" {
@@ -26,7 +26,7 @@

 #include "QSPIFlash.h"

-#define INVALID_ADDR    0xffffffff
+#define INVALID_ADDR    0xFFFFFFFF
 #define SECTOR_OF(a)    (a & ~(SFLASH_SECTOR_SIZE - 1))
 #define OFFSET_OF(a)    (a & (SFLASH_SECTOR_SIZE - 1))

@@ -35,10 +35,10 @@ uint8_t QSPIFlash::_buf[SFLASH_SECTOR_SIZE];
 uint32_t QSPIFlash::_addr = INVALID_ADDR;

 void QSPIFlash::begin() {
-  if (_flashBase != nullptr) return;
+  if (_flashBase) return;

  _flashBase = new Adafruit_SPIFlashBase(new Adafruit_FlashTransport_QSPI());
-  _flashBase->begin(NULL);
+  _flashBase->begin(nullptr);
 }

 size_t QSPIFlash::size() {
@@ -79,7 +79,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
    SYNC(NVMCTRL->SEESTAT.bit.BUSY);
    uint8_t c = ((volatile uint8_t *)SEEPROM_ADDR)[pos];
@@ -56,7 +56,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
    uint8_t c = qspi.readByte(pos);
    if (writing) *value = c;
@@ -59,7 +59,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
    uint8_t c = eeprom_read_byte((uint8_t*)pos);
    if (writing) *value = c;
@@ -30,16 +30,16 @@
  *  SPI  | 53    52     50     51  |
  *  SPI1 | 83    81     80     82  |
  *       +-------------------------+
-  * Any pin can be used for Chip Select (SS_PIN)
+  * Any pin can be used for Chip Select (SD_SS_PIN)
  */
-  #ifndef SCK_PIN
-    #define SCK_PIN       52
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN    52
  #endif
-  #ifndef MISO_PIN
-    #define MISO_PIN      50
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN   50
  #endif
-  #ifndef MOSI_PIN
-    #define MOSI_PIN      51
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN   51
  #endif
  #ifndef SDSS
    #define SDSS          53
@@ -51,4 +51,4 @@

 #endif

-#define SS_PIN        SDSS
+#define SD_SS_PIN     SDSS
@@ -24,28 +24,30 @@

 #if ENABLED(USE_WATCHDOG)

-  #include "watchdog.h"
+#include "watchdog.h"

-  void watchdog_init() {
-    // The low-power oscillator used by the WDT runs at 32,768 Hz with
-    // a 1:32 prescale, thus 1024 Hz, though probably not super precise.
+#define WDT_TIMEOUT_REG TERN(WATCHDOG_DURATION_8S, WDT_CONFIG_PER_CYC8192, WDT_CONFIG_PER_CYC4096) // 4 or 8 second timeout

-    // Setup WDT clocks
-    MCLK->APBAMASK.bit.OSC32KCTRL_ = true;
-    MCLK->APBAMASK.bit.WDT_ = true;
-    OSC32KCTRL->OSCULP32K.bit.EN1K = true;      // Enable out 1K (this is what WDT uses)
+void watchdog_init() {
+  // The low-power oscillator used by the WDT runs at 32,768 Hz with
+  // a 1:32 prescale, thus 1024 Hz, though probably not super precise.

-    WDT->CTRLA.bit.ENABLE = false;              // Disable watchdog for config
-    SYNC(WDT->SYNCBUSY.bit.ENABLE);
+  // Setup WDT clocks
+  MCLK->APBAMASK.bit.OSC32KCTRL_ = true;
+  MCLK->APBAMASK.bit.WDT_ = true;
+  OSC32KCTRL->OSCULP32K.bit.EN1K = true;      // Enable out 1K (this is what WDT uses)

-    WDT->INTENCLR.reg = WDT_INTENCLR_EW;        // Disable early warning interrupt
-    WDT->CONFIG.reg = WDT_CONFIG_PER_CYC4096;   // Set at least 4s period for chip reset
+  WDT->CTRLA.bit.ENABLE = false;              // Disable watchdog for config
+  SYNC(WDT->SYNCBUSY.bit.ENABLE);

-    HAL_watchdog_refresh();
+  WDT->INTENCLR.reg = WDT_INTENCLR_EW;        // Disable early warning interrupt
+  WDT->CONFIG.reg = WDT_TIMEOUT_REG;          // Set a 4s or 8s period for chip reset

-    WDT->CTRLA.reg = WDT_CTRLA_ENABLE;          // Start watchdog now in normal mode
-    SYNC(WDT->SYNCBUSY.bit.ENABLE);
-  }
+  HAL_watchdog_refresh();
+
+  WDT->CTRLA.reg = WDT_CTRLA_ENABLE;          // Start watchdog now in normal mode
+  SYNC(WDT->SYNCBUSY.bit.ENABLE);
+}

 #endif // USE_WATCHDOG

@@ -81,7 +81,9 @@ void HAL_init() {

  SetTimerInterruptPriorities();

-  TERN_(EMERGENCY_PARSER, USB_Hook_init());
+  #if ENABLED(EMERGENCY_PARSER) && USBD_USE_CDC
+    USB_Hook_init();
+  #endif
 }

 void HAL_clear_reset_source() { __HAL_RCC_CLEAR_RESET_FLAGS(); }
@@ -128,8 +130,12 @@ uint16_t HAL_adc_get_result() { return HAL_adc_result; }
 void flashFirmware(const int16_t) { NVIC_SystemReset(); }

 // Maple Compatibility
+volatile uint32_t systick_uptime_millis = 0;
 systickCallback_t systick_user_callback;
 void systick_attach_callback(systickCallback_t cb) { systick_user_callback = cb; }
-void HAL_SYSTICK_Callback() { if (systick_user_callback) systick_user_callback(); }
+void HAL_SYSTICK_Callback() {
+  systick_uptime_millis++;
+  if (systick_user_callback) systick_user_callback();
+}

 #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
@@ -29,6 +29,7 @@
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
+#include "Servo.h"
 #include "watchdog.h"
 #include "MarlinSerial.h"

@@ -110,6 +111,8 @@
 typedef int16_t pin_t;

 #define HAL_SERVO_LIB libServo
+#define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos()
+#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()

 // ------------------------
 // Public Variables
@@ -134,6 +137,8 @@ void HAL_clear_reset_source();
 // Reset reason
 uint8_t HAL_get_reset_source();

+inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+
 void _delay_ms(const int delay);

 extern "C" char* _sbrk(int incr);
@@ -154,14 +159,14 @@ static inline int freeMemory() {

 #define HAL_ANALOG_SELECT(pin) pinMode(pin, INPUT)

-inline void HAL_adc_init() {}
-
 #define HAL_ADC_VREF         3.3
-#define HAL_ADC_RESOLUTION  10
+#define HAL_ADC_RESOLUTION  ADC_RESOLUTION // 12
 #define HAL_START_ADC(pin)  HAL_adc_start_conversion(pin)
 #define HAL_READ_ADC()      HAL_adc_result
 #define HAL_ADC_READY()     true

+inline void HAL_adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); }
+
 void HAL_adc_start_conversion(const uint8_t adc_pin);

 uint16_t HAL_adc_get_result();
@@ -182,3 +187,21 @@ void flashFirmware(const int16_t);
 typedef void (*systickCallback_t)(void);
 void systick_attach_callback(systickCallback_t cb);
 void HAL_SYSTICK_Callback();
+extern volatile uint32_t systick_uptime_millis;
+
+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+
+/**
+ * set_pwm_frequency
+ *  Set the frequency of the timer corresponding to the provided pin
+ *  All Timer PWM pins run at the same frequency
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
+
+/**
+ * set_pwm_duty
+ *  Set the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
@@ -45,10 +45,10 @@ static SPISettings spiConfig;
  #include "../shared/Delay.h"

  void spiBegin(void) {
-    OUT_WRITE(SS_PIN, HIGH);
-    OUT_WRITE(SCK_PIN, HIGH);
-    SET_INPUT(MISO_PIN);
-    OUT_WRITE(MOSI_PIN, HIGH);
+    OUT_WRITE(SD_SS_PIN, HIGH);
+    OUT_WRITE(SD_SCK_PIN, HIGH);
+    SET_INPUT(SD_MISO_PIN);
+    OUT_WRITE(SD_MOSI_PIN, HIGH);
  }

  static uint16_t delay_STM32_soft_spi;
@@ -72,15 +72,15 @@ static SPISettings spiConfig;

  uint8_t HAL_SPI_STM32_SpiTransfer_Mode_3(uint8_t b) { // using Mode 3
    for (uint8_t bits = 8; bits--;) {
-      WRITE(SCK_PIN, LOW);
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, b & 0x80);

      DELAY_NS(delay_STM32_soft_spi);
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
      DELAY_NS(delay_STM32_soft_spi);

      b <<= 1;        // little setup time
-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);
    }
    DELAY_NS(125);
    return b;
@@ -132,8 +132,8 @@ static SPISettings spiConfig;
   * @details Only configures SS pin since stm32duino creates and initialize the SPI object
   */
  void spiBegin() {
-    #if PIN_EXISTS(SS)
-      OUT_WRITE(SS_PIN, HIGH);
+    #if PIN_EXISTS(SD_SS)
+      OUT_WRITE(SD_SS_PIN, HIGH);
    #endif
  }

@@ -154,10 +154,9 @@ static SPISettings spiConfig;
    spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);

    #if ENABLED(CUSTOM_SPI_PINS)
-      SPI.setMISO(MISO_PIN);
-      SPI.setMOSI(MOSI_PIN);
-      SPI.setSCLK(SCK_PIN);
-      SPI.setSSEL(SS_PIN);
+      SPI.setMISO(SD_MISO_PIN);
+      SPI.setMOSI(SD_MOSI_PIN);
+      SPI.setSCLK(SD_SCK_PIN);
    #endif

    SPI.begin();
@@ -0,0 +1,168 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+#include "MarlinSPI.h"
+
+static void spi_init(spi_t *obj, uint32_t speed, spi_mode_e mode, uint8_t msb, uint32_t dataSize) {
+  spi_init(obj, speed, mode, msb);
+  // spi_init set 8bit always
+  // TODO: copy the code from spi_init and handle data size, to avoid double init always!!
+  if (dataSize != SPI_DATASIZE_8BIT) {
+    obj->handle.Init.DataSize = dataSize;
+    HAL_SPI_Init(&obj->handle);
+    __HAL_SPI_ENABLE(&obj->handle);
+  }
+}
+
+void MarlinSPI::setClockDivider(uint8_t _div) {
+  _speed = spi_getClkFreq(&_spi);// / _div;
+  _clockDivider = _div;
+}
+
+void MarlinSPI::begin(void) {
+  //TODO: only call spi_init if any parameter changed!!
+  spi_init(&_spi, _speed, _dataMode, _bitOrder, _dataSize);
+}
+
+void MarlinSPI::setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc) {
+  _dmaHandle.Init.Direction = direction;
+  _dmaHandle.Init.PeriphInc = DMA_PINC_DISABLE;
+  _dmaHandle.Init.Mode = DMA_NORMAL;
+  _dmaHandle.Init.Priority = DMA_PRIORITY_LOW;
+  _dmaHandle.Init.MemInc = minc ? DMA_MINC_ENABLE : DMA_MINC_DISABLE;
+
+  if (_dataSize == DATA_SIZE_8BIT) {
+    _dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    _dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+  }
+  else {
+    _dmaHandle.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+    _dmaHandle.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+  }
+  #ifdef STM32F4xx
+    _dmaHandle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+  #endif
+
+  // start DMA hardware
+  // TODO: check if hardware is already enabled
+  #ifdef SPI1_BASE
+    if (_spiHandle.Instance == SPI1) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel3 : DMA1_Channel2;
+      #elif defined(STM32F4xx)
+        __HAL_RCC_DMA2_CLK_ENABLE();
+        _dmaHandle.Init.Channel = DMA_CHANNEL_3;
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA2_Stream3 : DMA2_Stream0;
+      #endif
+    }
+  #endif
+  #ifdef SPI2_BASE
+    if (_spiHandle.Instance == SPI2) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Channel5 : DMA1_Channel4;
+      #elif defined(STM32F4xx)
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Init.Channel = DMA_CHANNEL_0;
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Stream4 : DMA1_Stream3;
+      #endif
+    }
+  #endif
+  #ifdef SPI3_BASE
+    if (_spiHandle.Instance == SPI3) {
+      #ifdef STM32F1xx
+        __HAL_RCC_DMA2_CLK_ENABLE();
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA2_Channel2 : DMA2_Channel1;
+      #elif defined(STM32F4xx)
+        __HAL_RCC_DMA1_CLK_ENABLE();
+        _dmaHandle.Init.Channel = DMA_CHANNEL_0;
+        _dmaHandle.Instance = (direction == DMA_MEMORY_TO_PERIPH) ? DMA1_Stream5 : DMA1_Stream2;
+      #endif
+    }
+  #endif
+
+  HAL_DMA_Init(&_dmaHandle);
+}
+
+byte MarlinSPI::transfer(uint8_t _data) {
+  uint8_t rxData = 0xFF;
+  HAL_SPI_TransmitReceive(&_spi.handle, &_data, &rxData, 1, HAL_MAX_DELAY);
+  return rxData;
+}
+
+uint8_t MarlinSPI::dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length) {
+  const uint8_t ff = 0xFF;
+
+  //if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE) //only enable if disabled
+  __HAL_SPI_ENABLE(&_spi.handle);
+
+  if (receiveBuf) {
+    setupDma(_spi.handle, _dmaRx, DMA_PERIPH_TO_MEMORY, true);
+    HAL_DMA_Start(&_dmaRx, (uint32_t)&(_spi.handle.Instance->DR), (uint32_t)receiveBuf, length);
+    SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_RXDMAEN); /* Enable Rx DMA Request */
+  }
+
+  // check for 2 lines transfer
+  bool mincTransmit = true;
+  if (transmitBuf == nullptr && _spi.handle.Init.Direction == SPI_DIRECTION_2LINES && _spi.handle.Init.Mode == SPI_MODE_MASTER) {
+    transmitBuf = &ff;
+    mincTransmit = false;
+  }
+
+  if (transmitBuf) {
+    setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, mincTransmit);
+    HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
+    SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN);   /* Enable Tx DMA Request */
+  }
+
+  if (transmitBuf) {
+    HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+    HAL_DMA_Abort(&_dmaTx);
+    HAL_DMA_DeInit(&_dmaTx);
+  }
+
+  // while ((_spi.handle.Instance->SR & SPI_FLAG_RXNE) != SPI_FLAG_RXNE) {}
+
+  if (receiveBuf) {
+    HAL_DMA_PollForTransfer(&_dmaRx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+    HAL_DMA_Abort(&_dmaRx);
+    HAL_DMA_DeInit(&_dmaRx);
+  }
+
+  return 1;
+}
+
+uint8_t MarlinSPI::dmaSend(const void * transmitBuf, uint16_t length, bool minc) {
+  setupDma(_spi.handle, _dmaTx, DMA_MEMORY_TO_PERIPH, minc);
+  HAL_DMA_Start(&_dmaTx, (uint32_t)transmitBuf, (uint32_t)&(_spi.handle.Instance->DR), length);
+  __HAL_SPI_ENABLE(&_spi.handle);
+  SET_BIT(_spi.handle.Instance->CR2, SPI_CR2_TXDMAEN);   /* Enable Tx DMA Request */
+  HAL_DMA_PollForTransfer(&_dmaTx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
+  HAL_DMA_Abort(&_dmaTx);
+  // DeInit objects
+  HAL_DMA_DeInit(&_dmaTx);
+  return 1;
+}
+
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
@@ -0,0 +1,107 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "HAL.h"
+#include <SPI.h>
+
+extern "C" {
+  #include <utility/spi_com.h>
+}
+
+/**
+ * Marlin currently requires 3 SPI classes:
+ *
+ * SPIClass:
+ *  This class is normally provided by frameworks and has a semi-default interface.
+ *  This is needed because some libraries reference it globally.
+ *
+ * SPISettings:
+ *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
+ *
+ * These two classes are often provided by frameworks so we cannot extend them to add
+ * useful methods for Marlin.
+ *
+ * MarlinSPI:
+ *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
+ *  interface for SPI DMA transfer.
+ *
+ */
+
+#define DATA_SIZE_8BIT SPI_DATASIZE_8BIT
+#define DATA_SIZE_16BIT SPI_DATASIZE_16BIT
+
+class MarlinSPI {
+public:
+  MarlinSPI() : MarlinSPI(NC, NC, NC, NC) {}
+
+  MarlinSPI(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)NC) : _mosiPin(mosi), _misoPin(miso), _sckPin(sclk), _ssPin(ssel) {
+    _spi.pin_miso = digitalPinToPinName(_misoPin);
+    _spi.pin_mosi = digitalPinToPinName(_mosiPin);
+    _spi.pin_sclk = digitalPinToPinName(_sckPin);
+    _spi.pin_ssel = digitalPinToPinName(_ssPin);
+    _dataSize = DATA_SIZE_8BIT;
+    _bitOrder = MSBFIRST;
+    _dataMode = SPI_MODE_0;
+    _spi.handle.State = HAL_SPI_STATE_RESET;
+    setClockDivider(SPI_SPEED_CLOCK_DIV2_MHZ);
+  }
+
+  void begin(void);
+  void end(void) {}
+
+  byte transfer(uint8_t _data);
+  uint8_t dmaTransfer(const void *transmitBuf, void *receiveBuf, uint16_t length);
+  uint8_t dmaSend(const void * transmitBuf, uint16_t length, bool minc = true);
+
+  /* These methods are deprecated and kept for compatibility.
+   * Use SPISettings with SPI.beginTransaction() to configure SPI parameters.
+   */
+  void setBitOrder(BitOrder _order) { _bitOrder = _order; }
+
+  void setDataMode(uint8_t _mode) {
+    switch (_mode) {
+      case SPI_MODE0: _dataMode = SPI_MODE_0; break;
+      case SPI_MODE1: _dataMode = SPI_MODE_1; break;
+      case SPI_MODE2: _dataMode = SPI_MODE_2; break;
+      case SPI_MODE3: _dataMode = SPI_MODE_3; break;
+    }
+  }
+
+  void setClockDivider(uint8_t _div);
+
+private:
+  void setupDma(SPI_HandleTypeDef &_spiHandle, DMA_HandleTypeDef &_dmaHandle, uint32_t direction, bool minc = false);
+
+  spi_t _spi;
+  DMA_HandleTypeDef _dmaTx;
+  DMA_HandleTypeDef _dmaRx;
+  BitOrder _bitOrder;
+  spi_mode_e _dataMode;
+  uint8_t _clockDivider;
+  uint32_t _speed;
+  uint32_t _dataSize;
+  pin_t _mosiPin;
+  pin_t _misoPin;
+  pin_t _sckPin;
+  pin_t _ssPin;
+};
@@ -16,7 +16,6 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
-
 #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)

 #include "../../inc/MarlinConfig.h"
@@ -19,10 +19,11 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)

 #include "../../inc/MarlinConfig.h"

-#if ENABLED(SDIO_SUPPORT) && !defined(STM32GENERIC)
+#if ENABLED(SDIO_SUPPORT)

 #include <stdint.h>
 #include <stdbool.h>
@@ -31,7 +32,7 @@
  #error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
 #endif

-#ifdef USBD_USE_CDC_COMPOSITE
+#if HAS_SD_HOST_DRIVE

  // use USB drivers

@@ -87,18 +88,37 @@

    MKS Robin board seems to have stable SDIO with BusWide 1bit and ClockDiv 8 i.e. 4.8MHz SDIO clock frequency
    Additional testing is required as there are clearly some 4bit initialization problems
-
-    Add -DTRANSFER_CLOCK_DIV=8 to build parameters to improve SDIO stability
  */

-  #ifndef TRANSFER_CLOCK_DIV
-    #define TRANSFER_CLOCK_DIV (uint8_t(SDIO_INIT_CLK_DIV) / 40)
-  #endif
-
  #ifndef USBD_OK
    #define USBD_OK 0
  #endif

+  // Target Clock, configurable. Default is 18MHz, from STM32F1
+  #ifndef SDIO_CLOCK
+    #define SDIO_CLOCK                         18000000       /* 18 MHz */
+  #endif
+
+  // SDIO retries, configurable. Default is 3, from STM32F1
+  #ifndef SDIO_READ_RETRIES
+    #define SDIO_READ_RETRIES                  3
+  #endif
+
+  // SDIO Max Clock (naming from STM Manual, don't change)
+  #define SDIOCLK 48000000
+
+  static uint32_t clock_to_divider(uint32_t clk) {
+    // limit the SDIO master clock to 8/3 of PCLK2. See STM32 Manuals
+    // Also limited to no more than 48Mhz (SDIOCLK).
+    const uint32_t pclk2 = HAL_RCC_GetPCLK2Freq();
+    clk = min(clk, (uint32_t)(pclk2 * 8 / 3));
+    clk = min(clk, (uint32_t)SDIOCLK);
+    // Round up divider, so we don't run the card over the speed supported,
+    // and subtract by 2, because STM32 will add 2, as written in the manual:
+    // SDIO_CK frequency = SDIOCLK / [CLKDIV + 2]
+    return pclk2 / clk + (pclk2 % clk != 0) - 2;
+  }
+
  void go_to_transfer_speed() {
    SD_InitTypeDef Init;

@@ -108,7 +128,7 @@
    Init.ClockPowerSave      = hsd.Init.ClockPowerSave;
    Init.BusWide             = hsd.Init.BusWide;
    Init.HardwareFlowControl = hsd.Init.HardwareFlowControl;
-    Init.ClockDiv            = TRANSFER_CLOCK_DIV;
+    Init.ClockDiv            = clock_to_divider(SDIO_CLOCK);

    /* Initialize SDIO peripheral interface with default configuration */
    SDIO_Init(hsd.Instance, Init);
@@ -154,38 +174,25 @@
    //Initialize the SDIO (with initial <400Khz Clock)
    tempreg = 0;  //Reset value
    tempreg |= SDIO_CLKCR_CLKEN;  // Clock enabled
-    tempreg |= (uint32_t)0x76;    // Clock Divider. Clock = 48000 / (118 + 2) = 400Khz
+    tempreg |= SDIO_INIT_CLK_DIV; // Clock Divider. Clock = 48000 / (118 + 2) = 400Khz
    // Keep the rest at 0 => HW_Flow Disabled, Rising Clock Edge, Disable CLK ByPass, Bus Width = 0, Power save Disable
    SDIO->CLKCR = tempreg;

    // Power up the SDIO
-    SDIO->POWER = 0x03;
+    SDIO_PowerState_ON(SDIO);
  }

  void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init
-    UNUSED(hsd);   /* Prevent unused argument(s) compilation warning */
+    UNUSED(hsd);   // Prevent unused argument(s) compilation warning
    __HAL_RCC_SDIO_CLK_ENABLE();  // turn on SDIO clock
  }

-  constexpr uint8_t SD_RETRY_COUNT = TERN(SD_CHECK_AND_RETRY, 3, 1);
-
  bool SDIO_Init() {
-    //init SDIO and get SD card info
-
-    uint8_t retryCnt = SD_RETRY_COUNT;
+    uint8_t retryCnt = SDIO_READ_RETRIES;

    bool status;
    hsd.Instance = SDIO;
-    hsd.State = (HAL_SD_StateTypeDef) 0;  // HAL_SD_STATE_RESET
-
-    /*
-    hsd.Init.ClockEdge = SDIO_CLOCK_EDGE_RISING;
-    hsd.Init.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
-    hsd.Init.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
-    hsd.Init.BusWide = SDIO_BUS_WIDE_1B;
-    hsd.Init.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
-    hsd.Init.ClockDiv = 8;
-    */
+    hsd.State = HAL_SD_STATE_RESET;

    SD_LowLevel_Init();

@@ -257,7 +264,7 @@

  bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
    hsd.Instance = SDIO;
-    uint8_t retryCnt = SD_RETRY_COUNT;
+    uint8_t retryCnt = SDIO_READ_RETRIES;

    bool status;
    for (;;) {
@@ -306,7 +313,7 @@

  bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
    hsd.Instance = SDIO;
-    uint8_t retryCnt = SD_RETRY_COUNT;
+    uint8_t retryCnt = SDIO_READ_RETRIES;
    bool status;
    for (;;) {
      status = (bool) HAL_SD_WriteBlocks(&hsd, (uint8_t*)src, block, 1, 500);  // write one 512 byte block with 500mS timeout
@@ -319,3 +326,4 @@

 #endif // !USBD_USE_CDC_COMPOSITE
 #endif // SDIO_SUPPORT
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
@@ -28,15 +28,6 @@

 #include "../shared/eeprom_api.h"

-#if HAS_SERVOS
-  #include "Servo.h"
-  #define PAUSE_SERVO_OUTPUT() libServo::pause_all_servos()
-  #define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
-#else
-  #define PAUSE_SERVO_OUTPUT()
-  #define RESUME_SERVO_OUTPUT()
-#endif
-
 /**
 * The STM32 HAL supports chips that deal with "pages" and some with "sectors" and some that
 * even have multiple "banks" of flash.
@@ -113,7 +104,7 @@ bool PersistentStore::access_start() {
      // This must be the first time since power on that we have accessed the storage, or someone
      // loaded and called write_data and never called access_finish.
      // Lets go looking for the slot that holds our configuration.
-      if (eeprom_data_written) DEBUG_ECHOLN("Dangling EEPROM write_data");
+      if (eeprom_data_written) DEBUG_ECHOLNPGM("Dangling EEPROM write_data");
      uint32_t address = FLASH_ADDRESS_START;
      while (address <= FLASH_ADDRESS_END) {
        uint32_t address_value = (*(__IO uint32_t*)address);
@@ -172,11 +163,11 @@ bool PersistentStore::access_finish() {
        current_slot = EEPROM_SLOTS - 1;
        UNLOCK_FLASH();

-        PAUSE_SERVO_OUTPUT();
+        TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
        DISABLE_ISRS();
        status = HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError);
        ENABLE_ISRS();
-        RESUME_SERVO_OUTPUT();
+        TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());
        if (status != HAL_OK) {
          DEBUG_ECHOLNPAIR("HAL_FLASHEx_Erase=", status);
          DEBUG_ECHOLNPAIR("GetError=", HAL_FLASH_GetError());
@@ -227,11 +218,11 @@ bool PersistentStore::access_finish() {
      // Interrupts during this time can have unpredictable results, such as killing Servo
      // output. Servo output still glitches with interrupts disabled, but recovers after the
      // erase.
-      PAUSE_SERVO_OUTPUT();
+      TERN_(HAS_PAUSE_SERVO_OUTPUT, PAUSE_SERVO_OUTPUT());
      DISABLE_ISRS();
      eeprom_buffer_flush();
      ENABLE_ISRS();
-      RESUME_SERVO_OUTPUT();
+      TERN_(HAS_PAUSE_SERVO_OUTPUT, RESUME_SERVO_OUTPUT());

      eeprom_data_written = false;
    #endif
@@ -261,7 +252,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    const uint8_t c = TERN(FLASH_EEPROM_LEVELING, ram_eeprom[pos], eeprom_buffered_read_byte(pos));
    if (writing) *value = c;
@@ -19,13 +19,12 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)

 /**
 * Implementation of EEPROM settings in SD Card
 */

-#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
-
 #include "../../inc/MarlinConfig.h"

 #if ENABLED(SDCARD_EEPROM_EMULATION)
@@ -78,7 +77,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing/*=true*/) {
  for (size_t i = 0; i < size; i++) {
    uint8_t c = HAL_eeprom_data[pos + i];
    if (writing) value[i] = c;
@@ -89,4 +88,4 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
 }

 #endif // SDCARD_EEPROM_EMULATION
-#endif // STM32 && !STM32GENERIC
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
@@ -52,7 +52,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from either external EEPROM, program flash or Backup SRAM
    const uint8_t c = ( *(__IO uint8_t *)(BKPSRAM_BASE + ((uint8_t*)pos)) );
@@ -65,7 +65,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from either external EEPROM, program flash or Backup SRAM
    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
@@ -0,0 +1,59 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if NEEDS_HARDWARE_PWM
+
+#include "HAL.h"
+#include "timers.h"
+
+void set_pwm_frequency(const pin_t pin, int f_desired) {
+  if (!PWM_PIN(pin)) return;            // Don't proceed if no hardware timer
+
+  PinName pin_name = digitalPinToPinName(pin);
+  TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM); // Get HAL timer instance
+
+  LOOP_S_L_N(i, 0, NUM_HARDWARE_TIMERS) // Protect used timers
+    if (timer_instance[i] && timer_instance[i]->getHandle()->Instance == Instance)
+      return;
+
+  pwm_start(pin_name, f_desired, 0, RESOLUTION_8B_COMPARE_FORMAT);
+}
+
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
+  PinName pin_name = digitalPinToPinName(pin);
+  TIM_TypeDef *Instance = (TIM_TypeDef *)pinmap_peripheral(pin_name, PinMap_PWM);
+  uint16_t adj_val = Instance->ARR * v / v_size;
+  if (invert) adj_val = Instance->ARR - adj_val;
+
+  switch (get_pwm_channel(pin_name)) {
+    case TIM_CHANNEL_1: LL_TIM_OC_SetCompareCH1(Instance, adj_val); break;
+    case TIM_CHANNEL_2: LL_TIM_OC_SetCompareCH2(Instance, adj_val); break;
+    case TIM_CHANNEL_3: LL_TIM_OC_SetCompareCH3(Instance, adj_val); break;
+    case TIM_CHANNEL_4: LL_TIM_OC_SetCompareCH4(Instance, adj_val); break;
+  }
+}
+
+#endif // NEEDS_HARDWARE_PWM
+#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
@@ -51,19 +51,19 @@ void FastIO_init(); // Must be called before using fast io macros

 #if defined(STM32F0xx) || defined(STM32F1xx) || defined(STM32F3xx) || defined(STM32L0xx) || defined(STM32L4xx)
  #define _WRITE(IO, V) do { \
-    if (V) FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO])) ; \
-    else   FastIOPortMap[STM_PORT(digitalPin[IO])]->BRR  = _BV32(STM_PIN(digitalPin[IO])) ; \
+    if (V) FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
+    else   FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BRR  = _BV32(STM_PIN(digitalPinToPinName(IO))) ; \
  }while(0)
 #else
-  #define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPin[IO])]->BSRR = _BV32(STM_PIN(digitalPin[IO]) + ((V) ? 0 : 16)))
+  #define _WRITE(IO, V) (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->BSRR = _BV32(STM_PIN(digitalPinToPinName(IO)) + ((V) ? 0 : 16)))
 #endif

-#define _READ(IO)               bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPin[IO])]->IDR, _BV32(STM_PIN(digitalPin[IO]))))
-#define _TOGGLE(IO)             (FastIOPortMap[STM_PORT(digitalPin[IO])]->ODR ^= _BV32(STM_PIN(digitalPin[IO])))
+#define _READ(IO)               bool(READ_BIT(FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->IDR, _BV32(STM_PIN(digitalPinToPinName(IO)))))
+#define _TOGGLE(IO)             (FastIOPortMap[STM_PORT(digitalPinToPinName(IO))]->ODR ^= _BV32(STM_PIN(digitalPinToPinName(IO))))

 #define _GET_MODE(IO)
 #define _SET_MODE(IO,M)         pinMode(IO, M)
-#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               /*!< Output Push Pull Mode & GPIO_NOPULL   */
+#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               //!< Output Push Pull Mode & GPIO_NOPULL
 #define _SET_OUTPUT_OD(IO)      pinMode(IO, OUTPUT_OPEN_DRAIN)

 #define WRITE(IO,V)             _WRITE(IO,V)
@@ -73,9 +73,9 @@ void FastIO_init(); // Must be called before using fast io macros
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
 #define OUT_WRITE_OD(IO,V)      do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)

-#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              /*!< Input Floating Mode                   */
-#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       /*!< Input with Pull-up activation         */
-#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     /*!< Input with Pull-down activation       */
+#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              //!< Input Floating Mode
+#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       //!< Input with Pull-up activation
+#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     //!< Input with Pull-down activation
 #define SET_OUTPUT(IO)          OUT_WRITE(IO, LOW)
 #define SET_PWM(IO)             _SET_MODE(IO, PWM)

@@ -20,3 +20,7 @@
 *
 */
 #pragma once
+
+#if defined(USBD_USE_CDC_COMPOSITE) && DISABLED(NO_SD_HOST_DRIVE)
+  #define HAS_SD_HOST_DRIVE 1
+#endif
@@ -28,9 +28,6 @@
 //  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
 //#endif

-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on STM32."
-#endif

 #if ENABLED(SDCARD_EEPROM_EMULATION) && DISABLED(SDSUPPORT)
  #undef SDCARD_EEPROM_EMULATION // Avoid additional error noise
@@ -54,3 +51,7 @@
 #elif ENABLED(SERIAL_STATS_DROPPED_RX)
  #error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
 #endif
+
+#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)
+  #error "TFT_COLOR_UI, TFT_LVGL_UI and TFT_CLASSIC_UI are currently only supported on STM32F4 and STM32F1 hardware."
+#endif
@@ -18,17 +18,247 @@
 */
 #pragma once

-#if !(defined(NUM_DIGITAL_PINS) || defined(BOARD_NR_GPIO_PINS))
-  #error "M43 not supported for this board"
+#include <Arduino.h>
+
+#ifndef NUM_DIGITAL_PINS
+   // Only in ST's Arduino core (STM32duino, STM32Core)
+   #error "Expected NUM_DIGITAL_PINS not found"
 #endif

-// Strange - STM32F4 comes to HAL_STM32 rather than HAL_STM32F4 for these files
-#ifdef STM32F4
-  #ifdef NUM_DIGITAL_PINS            // Only in ST's Arduino core (STM32duino, STM32Core)
-    #include "pinsDebug_STM32duino.h"
-  #elif defined(BOARD_NR_GPIO_PINS)  // Only in STM32GENERIC (Maple)
-    #include "pinsDebug_STM32GENERIC.h"
+/**
+ *  Life gets complicated if you want an easy to use 'M43 I' output (in port/pin order)
+ *  because the variants in this platform do not always define all the I/O port/pins
+ *  that a CPU has.
+ *
+ *  VARIABLES:
+ *     Ard_num - Arduino pin number - defined by the platform. It is used by digitalRead and
+ *               digitalWrite commands and by M42.
+ *             - does not contain port/pin info
+ *             - is not in port/pin order
+ *             - typically a variant will only assign Ard_num to port/pins that are actually used
+ *     Index - M43 counter - only used to get Ard_num
+ *     x - a parameter/argument used to search the pin_array to try to find a signal name
+ *         associated with a Ard_num
+ *     Port_pin - port number and pin number for use with CPU registers and printing reports
+ *
+ *  Since M43 uses digitalRead and digitalWrite commands, only the Port_pins with an Ard_num
+ *  are accessed and/or displayed.
+ *
+ *  Three arrays are used.
+ *
+ *  digitalPin[] is provided by the platform.  It consists of the Port_pin numbers in
+ *  Arduino pin number order.
+ *
+ *  pin_array is a structure generated by the pins/pinsDebug.h header file.  It is generated by
+ *  the preprocessor. Only the signals associated with enabled options are in this table.
+ *  It contains:
+ *    - name of the signal
+ *    - the Ard_num assigned by the pins_YOUR_BOARD.h file using the platform defines.
+ *        EXAMPLE:  "#define KILL_PIN  PB1" results in Ard_num of 57.  57 is then used as the
+ *                  argument to digitalPinToPinName(IO) to get the Port_pin number
+ *    - if it is a digital or analog signal.  PWMs are considered digital here.
+ *
+ *  pin_xref is a structure generated by this header file.  It is generated by the
+ *  preprocessor. It is in port/pin order.  It contains just the port/pin numbers defined by the
+ *  platform for this variant.
+ *    - Ard_num
+ *    - printable version of Port_pin
+ *
+ *  Routines with an "x" as a parameter/argument are used to search the pin_array to try to
+ *  find a signal name associated with a port/pin.
+ *
+ *  NOTE -  the Arduino pin number is what is used by the M42 command, NOT the port/pin for that
+ *          signal.  The Arduino pin number is listed by the M43 I command.
+ */
+
+////////////////////////////////////////////////////////
+//
+// make a list of the Arduino pin numbers in the Port/Pin order
+//
+
+#define _PIN_ADD_2(NAME_ALPHA, ARDUINO_NUM) { {NAME_ALPHA}, ARDUINO_NUM },
+#define _PIN_ADD(NAME_ALPHA, ARDUINO_NUM) { NAME_ALPHA, ARDUINO_NUM },
+#define PIN_ADD(NAME) _PIN_ADD(#NAME, NAME)
+
+typedef struct {
+  char Port_pin_alpha[5];
+  pin_t Ard_num;
+} XrefInfo;
+
+const XrefInfo pin_xref[] PROGMEM = {
+  #include "pins_Xref.h"
+};
+
+////////////////////////////////////////////////////////////
+
+#define MODE_PIN_INPUT  0 // Input mode (reset state)
+#define MODE_PIN_OUTPUT 1 // General purpose output mode
+#define MODE_PIN_ALT    2 // Alternate function mode
+#define MODE_PIN_ANALOG 3 // Analog mode
+
+#define PIN_NUM(P) (P & 0x000F)
+#define PIN_NUM_ALPHA_LEFT(P) (((P & 0x000F) < 10) ? ('0' + (P & 0x000F)) : '1')
+#define PIN_NUM_ALPHA_RIGHT(P) (((P & 0x000F) > 9)  ? ('0' + (P & 0x000F) - 10) : 0 )
+#define PORT_NUM(P) ((P  >> 4) & 0x0007)
+#define PORT_ALPHA(P) ('A' + (P  >> 4))
+
+/**
+ * Translation of routines & variables used by pinsDebug.h
+ */
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+#define VALID_PIN(ANUM) ((ANUM) >= 0 && (ANUM) < NUMBER_PINS_TOTAL)
+#define digitalRead_mod(Ard_num) extDigitalRead(Ard_num)  // must use Arduino pin numbers when doing reads
+#define PRINT_PIN(Q)
+#define PRINT_PORT(ANUM) port_print(ANUM)
+#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1  // will report analog pin number in the print port routine
+#define GET_PIN_MAP_PIN_M43(Index) pin_xref[Index].Ard_num
+
+// x is a variable used to search pin_array
+#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
+#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin)
+#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin
+
+#ifndef M43_NEVER_TOUCH
+  #define _M43_NEVER_TOUCH(Index) (Index >= 9 && Index <= 12) // SERIAL/USB pins: PA9(TX) PA10(RX) PA11(USB_DM) PA12(USB_DP)
+  #ifdef KILL_PIN
+    #define M43_NEVER_TOUCH(Index) m43_never_touch(Index)
+
+    bool m43_never_touch(const pin_t Index) {
+      static pin_t M43_kill_index = -1;
+      if (M43_kill_index < 0)
+        for (M43_kill_index = 0; M43_kill_index < NUMBER_PINS_TOTAL; M43_kill_index++)
+          if (KILL_PIN == GET_PIN_MAP_PIN_M43(M43_kill_index)) break;
+      return _M43_NEVER_TOUCH(Index) || Index == M43_kill_index; // KILL_PIN and SERIAL/USB
+    }
  #else
-    #error "M43 not supported for this board"
+    #define M43_NEVER_TOUCH(Index) _M43_NEVER_TOUCH(Index)
  #endif
 #endif
+
+uint8_t get_pin_mode(const pin_t Ard_num) {
+  const PinName dp = digitalPinToPinName(Ard_num);
+  uint32_t ll_pin  = STM_LL_GPIO_PIN(dp);
+  GPIO_TypeDef *port = get_GPIO_Port(STM_PORT(dp));
+  uint32_t mode = LL_GPIO_GetPinMode(port, ll_pin);
+  switch (mode) {
+    case LL_GPIO_MODE_ANALOG: return MODE_PIN_ANALOG;
+    case LL_GPIO_MODE_INPUT: return MODE_PIN_INPUT;
+    case LL_GPIO_MODE_OUTPUT: return MODE_PIN_OUTPUT;
+    case LL_GPIO_MODE_ALTERNATE: return MODE_PIN_ALT;
+    TERN_(STM32F1xx, case LL_GPIO_MODE_FLOATING:)
+    default: return 0;
+  }
+}
+
+bool GET_PINMODE(const pin_t Ard_num) {
+  const uint8_t pin_mode = get_pin_mode(Ard_num);
+  return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT;  // assume all alt definitions are PWM
+}
+
+int8_t digital_pin_to_analog_pin(pin_t Ard_num) {
+  Ard_num -= NUM_ANALOG_FIRST;
+  return (Ard_num >= 0 && Ard_num < NUM_ANALOG_INPUTS) ? Ard_num : -1;
+}
+
+bool IS_ANALOG(const pin_t Ard_num) {
+  return get_pin_mode(Ard_num) == MODE_PIN_ANALOG;
+}
+
+bool is_digital(const pin_t x) {
+  const uint8_t pin_mode = get_pin_mode(pin_array[x].pin);
+  return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT;
+}
+
+void port_print(const pin_t Ard_num) {
+  char buffer[16];
+  pin_t Index;
+  for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++)
+    if (Ard_num == GET_PIN_MAP_PIN_M43(Index)) break;
+
+  const char * ppa = pin_xref[Index].Port_pin_alpha;
+  sprintf_P(buffer, PSTR("%s"), ppa);
+  SERIAL_ECHO(buffer);
+  if (ppa[3] == '\0') SERIAL_CHAR(' ');
+
+  // print analog pin number
+  const int8_t Port_pin = digital_pin_to_analog_pin(Ard_num);
+  if (Port_pin >= 0) {
+    sprintf_P(buffer, PSTR(" (A%d) "), Port_pin);
+    SERIAL_ECHO(buffer);
+    if (Port_pin < 10) SERIAL_CHAR(' ');
+  }
+  else
+    SERIAL_ECHO_SP(7);
+
+  // Print number to be used with M42
+  sprintf_P(buffer, PSTR(" M42 P%d "), Ard_num);
+  SERIAL_ECHO(buffer);
+  if (Ard_num < 10) SERIAL_CHAR(' ');
+  if (Ard_num < 100) SERIAL_CHAR(' ');
+}
+
+bool pwm_status(const pin_t Ard_num) {
+  return get_pin_mode(Ard_num) == MODE_PIN_ALT;
+}
+
+void pwm_details(const pin_t Ard_num) {
+  #ifndef STM32F1xx
+    if (pwm_status(Ard_num)) {
+      uint32_t alt_all = 0;
+      const PinName dp = digitalPinToPinName(Ard_num);
+      pin_t pin_number = uint8_t(PIN_NUM(dp));
+      const bool over_7 = pin_number >= 8;
+      const uint8_t ind = over_7 ? 1 : 0;
+      switch (PORT_ALPHA(dp)) {  // get alt function
+        case 'A' : alt_all = GPIOA->AFR[ind]; break;
+        case 'B' : alt_all = GPIOB->AFR[ind]; break;
+        case 'C' : alt_all = GPIOC->AFR[ind]; break;
+        case 'D' : alt_all = GPIOD->AFR[ind]; break;
+        #ifdef PE_0
+          case 'E' : alt_all = GPIOE->AFR[ind]; break;
+        #elif defined (PF_0)
+          case 'F' : alt_all = GPIOF->AFR[ind]; break;
+        #elif defined (PG_0)
+          case 'G' : alt_all = GPIOG->AFR[ind]; break;
+        #elif defined (PH_0)
+          case 'H' : alt_all = GPIOH->AFR[ind]; break;
+        #elif defined (PI_0)
+          case 'I' : alt_all = GPIOI->AFR[ind]; break;
+        #elif defined (PJ_0)
+          case 'J' : alt_all = GPIOJ->AFR[ind]; break;
+        #elif defined (PK_0)
+          case 'K' : alt_all = GPIOK->AFR[ind]; break;
+        #elif defined (PL_0)
+          case 'L' : alt_all = GPIOL->AFR[ind]; break;
+        #endif
+      }
+      if (over_7) pin_number -= 8;
+
+      uint8_t alt_func = (alt_all >> (4 * pin_number)) & 0x0F;
+      SERIAL_ECHOPAIR("Alt Function: ", alt_func);
+      if (alt_func < 10) SERIAL_CHAR(' ');
+      SERIAL_ECHOPGM(" - ");
+      switch (alt_func) {
+        case  0 : SERIAL_ECHOPGM("system (misc. I/O)"); break;
+        case  1 : SERIAL_ECHOPGM("TIM1/TIM2 (probably PWM)"); break;
+        case  2 : SERIAL_ECHOPGM("TIM3..5 (probably PWM)"); break;
+        case  3 : SERIAL_ECHOPGM("TIM8..11 (probably PWM)"); break;
+        case  4 : SERIAL_ECHOPGM("I2C1..3"); break;
+        case  5 : SERIAL_ECHOPGM("SPI1/SPI2"); break;
+        case  6 : SERIAL_ECHOPGM("SPI3"); break;
+        case  7 : SERIAL_ECHOPGM("USART1..3"); break;
+        case  8 : SERIAL_ECHOPGM("USART4..6"); break;
+        case  9 : SERIAL_ECHOPGM("CAN1/CAN2, TIM12..14  (probably PWM)"); break;
+        case 10 : SERIAL_ECHOPGM("OTG"); break;
+        case 11 : SERIAL_ECHOPGM("ETH"); break;
+        case 12 : SERIAL_ECHOPGM("FSMC, SDIO, OTG"); break;
+        case 13 : SERIAL_ECHOPGM("DCMI"); break;
+        case 14 : SERIAL_ECHOPGM("unused (shouldn't see this)"); break;
+        case 15 : SERIAL_ECHOPGM("EVENTOUT"); break;
+      }
+    }
+  #else
+    // TODO: F1 doesn't support changing pins function, so we need to check the function of the PIN and if it's enabled
+  #endif
+} // pwm_details
@@ -1,125 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Support routines for STM32GENERIC (Maple)
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
- */
-
-#ifdef BOARD_NR_GPIO_PINS  // Only in STM32GENERIC (Maple)
-
-#ifdef __STM32F1__
-  #include "../STM32F1/fastio.h"
-#elif defined(STM32F4) || defined(STM32F7)
-  #include "../STM32_F4_F7/fastio.h"
-#else
-  #include "fastio.h"
-#endif
-
-extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS];
-
-#define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
-#define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define VALID_PIN(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS)
-#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin)
-#define pwm_status(pin) PWM_PIN(pin)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PORT(p) print_port(p)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define MULTI_NAME_PAD 21 // space needed to be pretty if not first name assigned to a pin
-
-// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
-#ifndef M43_NEVER_TOUCH
-  #define M43_NEVER_TOUCH(Q) (Q >= 9 && Q <= 12) // SERIAL/USB pins PA9(TX) PA10(RX)
-#endif
-
-static inline int8_t get_pin_mode(pin_t pin) {
-  return VALID_PIN(pin) ? _GET_MODE(pin) : -1;
-}
-
-static inline pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) {
-  if (!VALID_PIN(pin)) return -1;
-  int8_t adc_channel = int8_t(PIN_MAP[pin].adc_channel);
-  #ifdef NUM_ANALOG_INPUTS
-    if (adc_channel >= NUM_ANALOG_INPUTS) adc_channel = ADCx;
-  #endif
-  return pin_t(adc_channel);
-}
-
-static inline bool IS_ANALOG(pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
-  if (PIN_MAP[pin].adc_channel != ADCx) {
-    #ifdef NUM_ANALOG_INPUTS
-      if (PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) return false;
-    #endif
-    return _GET_MODE(pin) == GPIO_INPUT_ANALOG && !M43_NEVER_TOUCH(pin);
-  }
-  return false;
-}
-
-static inline bool GET_PINMODE(const pin_t pin) {
-  return VALID_PIN(pin) && !IS_INPUT(pin);
-}
-
-static inline bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
-  const pin_t pin = GET_ARRAY_PIN(array_pin);
-  return (!IS_ANALOG(pin)
-    #ifdef NUM_ANALOG_INPUTS
-      || PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS
-    #endif
-  );
-}
-
-#include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density
-
-static inline void pwm_details(const pin_t pin) {
-  if (PWM_PIN(pin)) {
-    timer_dev * const tdev = PIN_MAP[pin].timer_device;
-    const uint8_t channel = PIN_MAP[pin].timer_channel;
-    const char num = (
-      #if EITHER(STM32_HIGH_DENSITY, STM32_XL_DENSITY)
-        tdev == &timer8 ? '8' :
-        tdev == &timer5 ? '5' :
-      #endif
-      tdev == &timer4 ? '4' :
-      tdev == &timer3 ? '3' :
-      tdev == &timer2 ? '2' :
-      tdev == &timer1 ? '1' : '?'
-    );
-    char buffer[10];
-    sprintf_P(buffer, PSTR(" TIM%c CH%c"), num, ('0' + channel));
-    SERIAL_ECHO(buffer);
-  }
-}
-
-static inline void print_port(pin_t pin) {
-  const char port = 'A' + char(pin >> 4); // pin div 16
-  const int16_t gbit = PIN_MAP[pin].gpio_bit;
-  char buffer[8];
-  sprintf_P(buffer, PSTR("P%c%hd "), port, gbit);
-  if (gbit < 10) SERIAL_CHAR(' ');
-  SERIAL_ECHO(buffer);
-}
-
-#endif // BOARD_NR_GPIO_PINS
--- a/Show More
+++ b/Show More