jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Final CR2020 tweaks

Browse Source
This commit is contained in:
InsanityAutomation
2019-10-18 12:53:06 -04:00
parent 39cd26487a
commit ebaa72811d
2 changed files with 15 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+6 -3
View File
@@ -74,6 +74,8 @@
//#define Bondtech
//#define E3DTitan
//#define DirectDrive // Any direct drive extruder, reduces filament change lengths
/*
*
* If any dual extruder is used, define type here
@@ -287,6 +289,7 @@
#define LCD_CONTRAST_INIT 165
#define SUICIDE_PIN 12 // Power up method is triggering the kill. Need to add consistent inversion upstream
#define SUICIDE_PIN_INVERTING true
#define DirectDrive
#endif
#if ENABLED(PLUS)
#define lerdgeFilSensor //Using lerdge filament sensor, which is opposite polarity to stock)
@@ -1255,9 +1258,9 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves
#elif ENABLED(MachineCR2020)
#define DEFAULT_MAX_FEEDRATE { 500, 500, 15, 120 }
#define DEFAULT_MAX_ACCELERATION { 700, 700, 100, 1000 }
#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_MAX_FEEDRATE { 750, 750, 10, 75 }
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 75 }
#define DEFAULT_ACCELERATION 750 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves
#endif
Marlin/Configuration_adv.h
+9 -2
View File
@@ -1715,7 +1715,11 @@
// This short retract is done immediately, before parking the nozzle.
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload.
#if ENABLED(DirectDrive)
#define FILAMENT_CHANGE_UNLOAD_LENGTH 125
#else
#define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload.
#endif
// For Bowden, the full length of the tube and nozzle.
// For direct drive, the full length of the nozzle.
// Set to 0 for manual unloading.
@@ -1724,7 +1728,10 @@
// 0 to disable start loading and skip to fast load only
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast.
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
#if(ENABLED(MachineCRX))
#if ENABLED(DirectDrive)
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 100
#elif(ENABLED(MachineCRX))
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 450 // (mm) Load length of filament, from extruder gear to nozzle.
#else
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle.