Update pins_FORMBOT_TREX2PLUS.h

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

.github/issue_template.md

@@ -1,6 +1,6 @@
 <!--
 
-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/code_of_conduct.md
 
 Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/.
 
@@ -28,4 +28,4 @@ Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to s
 
 * Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
 * Provide pictures or links to videos that clearly demonstrate the issue.
-* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
+* See [How Can I Contribute](https://github.com/MarlinFirmware/Marlin/blob/1.1.x/.github/contributing.md#how-can-i-contribute) for additional guidelines.

.gitignore

@@ -125,6 +125,7 @@ lib/readme.txt
 #Visual Studio
 *.sln
 *.vcxproj
+*.vcxproj.user
 *.vcxproj.filters
 Release/
 Debug/
@@ -132,7 +133,7 @@ __vm/
 .vs/
 vc-fileutils.settings
 
-#VScode
+#Visual Studio Code
 .vscode
 .vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json

.travis.yml

@@ -92,10 +92,10 @@ script:
   - opt_set TEMP_SENSOR_BED 1
   - opt_set POWER_SUPPLY 1
   - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
+  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS PINS_DEBUGGING
   - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
   - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
-  - opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
+  - opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY POWER_LOSS_PIN POWER_LOSS_STATE
   - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
   - opt_set GRID_MAX_POINTS_X 16
   - opt_set_adv FANMUX0_PIN 53
@@ -111,14 +111,16 @@ script:
   - opt_set TEMP_SENSOR_3 20
   - opt_set TEMP_SENSOR_4 999
   - opt_set TEMP_SENSOR_BED 1
-  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
-  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME
+  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT SKEW_CORRECTION
+  - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME JUNCTION_DEVIATION MAX7219_DEBUG
+  - opt_set_adv MAX7219_ROTATE 270
   - build_marlin
   #
   # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
   #
-  - opt_set LANGUAGE kana_utf8
-  - opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE BEZIER_JERK_CONTROL
+  - opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE S_CURVE_ACCELERATION
+  - opt_set LCD_LANGUAGE kana_utf8
   - opt_disable SEGMENT_LEVELED_MOVES
   - opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
   - build_marlin
@@ -160,25 +162,13 @@ script:
   - opt_set_adv I2C_SLAVE_ADDRESS 63
   - build_marlin
   #
-  # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
-  # Include a test for LIN_ADVANCE here also
-  #
-  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
-  - opt_set EXTRUDERS 5
-  - opt_set TEMP_SENSOR_1 1
-  - opt_set TEMP_SENSOR_2 5
-  - opt_set TEMP_SENSOR_3 20
-  - opt_set TEMP_SENSOR_4 999
-  - opt_set TEMP_SENSOR_BED 1
-  - opt_enable_adv LIN_ADVANCE
-  - build_marlin
-  #
-  # Mixing Extruder with 5 steppers
+  # Mixing Extruder with 5 steppers, Cyrillic
   #
   - restore_configs
   - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
-  - opt_enable MIXING_EXTRUDER
+  - opt_enable MIXING_EXTRUDER CR10_STOCKDISPLAY
   - opt_set MIXING_STEPPERS 5
+  - opt_set LCD_LANGUAGE ru
   - build_marlin
   #
   # Test DUAL_X_CARRIAGE
@@ -193,11 +183,11 @@ script:
   #
   # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
   #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
-  - opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
-  - opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
-  - opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
+  #- restore_configs
+  #- opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
+  #- opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
+  #- opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
+  #- opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
   #
   # Test SWITCHING_EXTRUDER
   #
@@ -206,15 +196,14 @@ script:
   - opt_set EXTRUDERS 2
   - opt_enable NUM_SERVOS
   - opt_set NUM_SERVOS 1
-  - opt_set TEMP_SENSOR_1 1
   - opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
   - build_marlin
   #
   # Enable COREXY
   #
-  - restore_configs
-  - opt_enable COREXY
-  - build_marlin
+  #- restore_configs
+  #- opt_enable COREXY
+  #- build_marlin
   #
   # Test many less common options
   #
@@ -228,7 +217,7 @@ script:
   - opt_enable_adv VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL
   - opt_enable_adv EXTRA_FAN_SPEED FWERETRACT Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS
   - opt_enable_adv MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER
+  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
   - opt_enable FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR
   - opt_enable ENDSTOP_INTERRUPTS_FEATURE FAN_SOFT_PWM SDSUPPORT
   - opt_enable USE_XMAX_PLUG
@@ -238,15 +227,15 @@ script:
   #
   # ULTRA_LCD
   #
-  - restore_configs
-  - opt_enable ULTRA_LCD
-  - build_marlin
+  #- restore_configs
+  #- opt_enable ULTRA_LCD
+  #- build_marlin
   #
   # DOGLCD
   #
-  - restore_configs
-  - opt_enable DOGLCD
-  - build_marlin
+  #- restore_configs
+  #- opt_enable DOGLCD
+  #- build_marlin
   #
   # MAKRPANEL
   # Needs to use Melzi and Sanguino hardware
@@ -257,15 +246,26 @@ script:
   #
   # REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
   #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
-  - build_marlin
-  #
+  #- restore_configs
+  #- opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
+  #- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
+  #- build_marlin
+  # #
   # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
   #
+  #- restore_configs
+  #- opt_enable G3D_PANEL SDSUPPORT
+  #- opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
+  #- opt_set_adv SDSORT_GCODE true
+  #- opt_set_adv SDSORT_USES_RAM true
+  #- opt_set_adv SDSORT_USES_STACK true
+  #- opt_set_adv SDSORT_CACHE_NAMES true
+  #- build_marlin
+  #
+  # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with LIGHTWEIGHT_UI
+  #
   - restore_configs
-  - opt_enable G3D_PANEL SDSUPPORT
+  - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
   - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
   - opt_set_adv SDSORT_GCODE true
   - opt_set_adv SDSORT_USES_RAM true
@@ -273,13 +273,6 @@ script:
   - opt_set_adv SDSORT_CACHE_NAMES true
   - build_marlin
   #
-  # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
-  #
-  - restore_configs
-  - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
-  - build_marlin
-  #
   # REPRAPWORLD_KEYPAD
   #
   # Cant find configuration details to get it to compile
@@ -289,9 +282,9 @@ script:
   #
   # RA_CONTROL_PANEL
   #
-  - restore_configs
-  - opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
-  - build_marlin
+  #- restore_configs
+  #- opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
+  #- build_marlin
   #
   ######## I2C LCD/PANELS ##############
   #
@@ -319,9 +312,19 @@ script:
   #
   # LCM1602
   #
-  - restore_configs
-  - opt_enable LCM1602
-  - build_marlin
+  #- restore_configs
+  #- opt_enable LCM1602
+  #- build_marlin
+  #
+  # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+  #
+  #- restore_configs
+  #- opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
+  #- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
+  #
+  #- restore_configs
+  #- opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT
+  #- for lang in an bg ca zh_CN zh_TW cz da de el el-gr en es eu fi fr gl hr it jp-kana nl pl pt pt-br ru sk tr uk test; do opt_set LCD_LANGUAGE $lang; echo "compile with language $lang ..."; build_marlin
   #
   #
   ######## Example Configurations ##############
@@ -339,8 +342,8 @@ script:
   # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
   #
   - use_example_configs delta/generic
-  - opt_disable DISABLE_MIN_ENDSTOPS
-  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
+  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT
+  - opt_enable OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
   - build_marlin
   #
   # Delta Config (FLSUN AC because it's complex)
@@ -353,12 +356,25 @@ script:
   #- use_example_configs makibox
   #- build_marlin
   #
-  # SCARA with TMC2130 and TMC2208
+  # SCARA with TMC2130
   #
   - use_example_configs SCARA
-  - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER SCARA_FEEDRATE_SCALING
-  - opt_enable_adv HAVE_TMC2130 HAVE_TMC2208 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2208 E0_IS_TMC2208
-  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG SENSORLESS_HOMING TMC_Z_CALIBRATION
+  - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
+  - opt_set X_DRIVER_TYPE TMC2130
+  - opt_set Y_DRIVER_TYPE TMC2130
+  - opt_set Z_DRIVER_TYPE TMC2130
+  - opt_set E0_DRIVER_TYPE TMC2130
+  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
+  - build_marlin
+  #
+  # TMC2208 Config
+  #
+  - restore_configs
+  - opt_set X_DRIVER_TYPE TMC2208
+  - opt_set Y_DRIVER_TYPE TMC2208
+  - opt_set Z_DRIVER_TYPE TMC2208
+  - opt_set E0_DRIVER_TYPE TMC2208
+  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
   - build_marlin
   #
   # tvrrug Config need to check board type for sanguino atmega644p

Marlin/Conditionals_LCD.h

@@ -479,8 +479,11 @@
   #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
 
   #define BLTOUCH_DEPLOY    10
+  #define BLTOUCH_SW_MODE   60
   #define BLTOUCH_STOW      90
   #define BLTOUCH_SELFTEST 120
+  #define BLTOUCH_5V_MODE  140
+  #define BLTOUCH_OD_MODE  150
   #define BLTOUCH_RESET    160
   #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
 

Marlin/Conditionals_post.h

@@ -190,11 +190,17 @@
  * Safe Homing Options
  */
 #if ENABLED(Z_SAFE_HOMING)
+  #if ENABLED(AUTO_BED_LEVELING_UBL)
+    // Home close to center so grid points have z heights very close to 0
+    #define _SAFE_POINT(A) (((GRID_MAX_POINTS_##A) / 2) * (A##_BED_SIZE - 2 * (MESH_INSET)) / (GRID_MAX_POINTS_##A - 1) + MESH_INSET)
+  #else
+    #define _SAFE_POINT(A) A##_CENTER
+  #endif
   #ifndef Z_SAFE_HOMING_X_POINT
-    #define Z_SAFE_HOMING_X_POINT X_CENTER
+    #define Z_SAFE_HOMING_X_POINT _SAFE_POINT(X)
   #endif
   #ifndef Z_SAFE_HOMING_Y_POINT
-    #define Z_SAFE_HOMING_Y_POINT Y_CENTER
+    #define Z_SAFE_HOMING_Y_POINT _SAFE_POINT(Y)
   #endif
   #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT
   #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT

Marlin/Configuration_adv.h

@@ -75,8 +75,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 180       // Seconds
-  #define THERMAL_PROTECTION_HYSTERESIS 2     // Degrees Celsius
+  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
+  #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
   /**
    * Whenever an M104, M109, or M303 increases the target temperature, the
@@ -90,7 +90,7 @@
    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
    * below 2.
    */
-  #define WATCH_TEMP_PERIOD 180               // Seconds
+  #define WATCH_TEMP_PERIOD 20                // Seconds
   #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
@@ -98,14 +98,24 @@
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD 300    // Seconds
-  #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+  #if ENABLED(TREX3) && DISABLED(BedAC)
+    #define THERMAL_PROTECTION_BED_PERIOD 50    // Seconds
+  #else
+    #define THERMAL_PROTECTION_BED_PERIOD 20    // Seconds
+  #endif
+
+  #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius
 
   /**
    * As described above, except for the bed (M140/M190/M303).
    */
-  #define WATCH_BED_TEMP_PERIOD 60                // Seconds
-  #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+  #if ENABLED(TREX3) && DISABLED(BedAC)
+    #define WATCH_BED_TEMP_PERIOD 90                // Seconds
+    #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+  #else
+    #define WATCH_BED_TEMP_PERIOD 60                // Seconds
+    #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+  #endif
 #endif
 
 #if ENABLED(PIDTEMP)
@@ -208,20 +218,10 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 #define FAN_KICKSTART_TIME 100
 
-/**
- * PWM Fan Scaling
- *
- * Define the min/max speeds for PWM fans (as set with M106).
- *
- * With these options the M106 0-255 value range is scaled to a subset
- * to ensure that the fan has enough power to spin, or to run lower
- * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
- * Value 0 always turns off the fan.
- *
- * Define one or both of these to override the default 0-255 range.
- */
+// This defines the minimal speed for the main fan, run in PWM mode
+// to enable uncomment and set minimal PWM speed for reliable running (1-255)
+// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
 //#define FAN_MIN_PWM 50
-//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -237,12 +237,16 @@
  * Multiple extruders can be assigned to the same pin in which case
  * the fan will turn on when any selected extruder is above the threshold.
  */
-#define E0_AUTO_FAN_PIN -1
-#define E1_AUTO_FAN_PIN -1
+#if ENABLED(TREX3)
+  #define E0_AUTO_FAN_PIN  6
+  #define E1_AUTO_FAN_PIN  45
+#else
+  #define E0_AUTO_FAN_PIN -1
+  #define E1_AUTO_FAN_PIN -1
+#endif
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
-#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -262,7 +266,7 @@
  */
 #define CASE_LIGHT_ENABLE
 #if ENABLED(CASE_LIGHT_ENABLE)
-  #define CASE_LIGHT_PIN 5                  // Override the default pin if needed
+  //#define CASE_LIGHT_PIN 8                  // Override the default pin if needed
   #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255   // Set default power-up brightness (0-255, requires PWM pin)
@@ -331,22 +335,21 @@
   #endif
 #endif
 
-/**
- * Dual X Carriage
- *
- * This setup has two X carriages that can move independently, each with its own hotend.
- * The carriages can be used to print an object with two colors or materials, or in
- * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
- * The inactive carriage is parked automatically to prevent oozing.
- * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
- * By default the X2 stepper is assigned to the first unused E plug on the board.
- */
-//#define DUAL_X_CARRIAGE
+// Enable this for dual x-carriage printers.
+// A dual x-carriage design has the advantage that the inactive extruder can be parked which
+// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
+// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug.
+#define DUAL_X_CARRIAGE
 #if ENABLED(DUAL_X_CARRIAGE)
-  #define X1_MIN_POS X_MIN_POS  // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
-  #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
-  #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
-  #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
+  // Configuration for second X-carriage
+  // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
+  // the second x-carriage always homes to the maximum endstop.
+  #define X2_MIN_POS 0     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
+  #if DISABLED(TREX3) || ENABLED(TREX3_UPGRADE)
+    #define X2_MAX_POS 442       // Set this to the distance between toolheads when both heads are homed
+  #else
+    #define X2_MAX_POS 446       // Set this to the distance between toolheads when both heads are homed
+  #endif
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
   #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
       // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
@@ -364,14 +367,14 @@
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
-  #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
+  #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
 
   // Default settings in "Auto-park Mode"
   #define TOOLCHANGE_PARK_ZLIFT   0.2      // the distance to raise Z axis when parking an extruder
   #define TOOLCHANGE_UNPARK_ZLIFT 1        // the distance to raise Z axis when unparking an extruder
 
   // Default x offset in duplication mode (typically set to half print bed width)
-  #define DEFAULT_DUPLICATION_X_OFFSET 100
+  #define DEFAULT_DUPLICATION_X_OFFSET 200
 
 #endif // DUAL_X_CARRIAGE
 
@@ -449,21 +452,14 @@
 //
 // Use Junction Deviation instead of traditional Jerk Limiting
 //
-//#define JUNCTION_DEVIATION
+#define JUNCTION_DEVIATION
 #if ENABLED(JUNCTION_DEVIATION)
-  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+  #define JUNCTION_DEVIATION_MM 0.08
+  //#define JUNCTION_DEVIATION_INCLUDE_E
 #endif
 
-/**
- * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
- * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
- * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
- * lowest stepping frequencies.
- */
-//#define ADAPTIVE_STEP_SMOOTHING
-
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
+#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -594,10 +590,6 @@
    * point in the file.
    */
   //#define POWER_LOSS_RECOVERY
-  #if ENABLED(POWER_LOSS_RECOVERY)
-    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
-    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
-  #endif
 
   /**
    * Sort SD file listings in alphabetical order.
@@ -626,9 +618,9 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
+    #define SDSORT_LIMIT       30     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
-    #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+    #define SDSORT_GCODE       true  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
@@ -678,7 +670,7 @@
  */
 #if ENABLED(DOGLCD)
   // Show SD percentage next to the progress bar
-  #define DOGM_SD_PERCENT
+  //#define DOGM_SD_PERCENT
 
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
@@ -748,7 +740,7 @@
 #if ENABLED(BABYSTEPPING)
   //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
-  #define BABYSTEP_MULTIPLICATOR 25   // Babysteps are very small. Increase for faster motion.
+  #define BABYSTEP_MULTIPLICATOR 10   // Babysteps are very small. Increase for faster motion.
   #define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping
   #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
   #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
@@ -774,11 +766,11 @@
  * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
  * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
-#if(ENABLED(E_2208) && !ENABLED(E_SpreadCycle))
-#define LIN_ADVANCE
+#if DISABLED(E_2208) || ENABLED(E_Spreadcycle)
+  #define LIN_ADVANCE
 #endif
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.07  // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
@@ -786,10 +778,10 @@
 
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
-  //#define MESH_MIN_X MESH_INSET
-  //#define MESH_MIN_Y MESH_INSET
-  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
-  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+  //#define MESH_MIN_X 50
+  //#define MESH_MIN_Y 0
+  //#define MESH_MAX_X X_BED_SIZE - (50)
+  //#define MESH_MAX_Y Y_BED_SIZE - (0)
 #endif
 
 // @section extras
@@ -806,7 +798,7 @@
 #endif
 
 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
-#define BEZIER_CURVE_SUPPORT
+//#define BEZIER_CURVE_SUPPORT
 
 // G38.2 and G38.3 Probe Target
 // Set MULTIPLE_PROBING if you want G38 to double touch
@@ -818,46 +810,10 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-/**
- * Minimum delay after setting the stepper DIR (in ns)
- *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
- *    20 : Minimum for TMC2xxx drivers
- *   200 : Minimum for A4988 drivers
- *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
- *   650 : Minimum for DRV8825 drivers
- *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
- * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
- *
- * Override the default value based on the driver type set in Configuration.h.
- */
-//#define MINIMUM_STEPPER_DIR_DELAY 650
-
-/**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   1 : Minimum for A4988 stepper drivers
- *   1 : Minimum for LV8729 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
- *
- * Override the default value based on the driver type set in Configuration.h.
- */
-//#define MINIMUM_STEPPER_PULSE 2
-
-/**
- * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
- *  500000 : Maximum for A4988 stepper driver
- *  400000 : Maximum for TMC2xxx stepper drivers
- *  250000 : Maximum for DRV8825 stepper driver
- *  150000 : Maximum for TB6600 stepper driver
- *  130000 : Maximum for LV8729 stepper driver
- *   15000 : Maximum for TB6560 stepper driver
- *
- * Override the default value based on the driver type set in Configuration.h.
- */
-//#define MAXIMUM_STEPPER_RATE 250000
+// The minimum pulse width (in µs) for stepping a stepper.
+// Set this if you find stepping unreliable, or if using a very fast CPU.
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2
 
 // @section temperature
 
@@ -947,7 +903,7 @@
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  *
  */
-#define FWRETRACT  // ONLY PARTIALLY TESTED
+//#define FWRETRACT  // ONLY PARTIALLY TESTED
 #if ENABLED(FWRETRACT)
   #define MIN_AUTORETRACT 0.1             // When auto-retract is on, convert E moves of this length and over
   #define MAX_AUTORETRACT 10.0            // Upper limit for auto-retract conversion
@@ -983,54 +939,64 @@
 #define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
-  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
                                                   // This short retract is done immediately, before parking the nozzle.
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     41  // (mm/s) Unload filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      50  // (mm) The length of filament for a complete unload.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
                                                   //   Set to 0 for manual unloading.
   #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
   #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
                                                   // 0 to disable start loading and skip to fast load only
-  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE  30  // (mm/s) Load filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   50  // (mm) Load length of filament, from extruder gear to nozzle.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
   //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
   #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
-  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         20  // (mm) Length to extrude after loading.
                                                   //   Set to 0 for manual extrusion.
                                                   //   Filament can be extruded repeatedly from the Filament Change menu
                                                   //   until extrusion is consistent, and to purge old filament.
 
                                                   // Filament Unload does a Retract, Delay, and Purge first:
-  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH       4  // (mm) Unload initial retract length.
   #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
-  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
-
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         0  // (mm) An unretract is done, then this length is purged.
   #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
-  #define FILAMENT_CHANGE_ALERT_BEEPS         2   // Number of alert beeps to play when a response is needed.
+  #define FILAMENT_CHANGE_ALERT_BEEPS          3  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
-  #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
-  #define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
 
-  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
   //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * TMC26X Stepper Driver options
- *
- * The TMC26XStepper library is required for this stepper driver.
- * https://github.com/trinamic/TMC26XStepper
+ * Enable this section if you have TMC26X motor drivers.
+ * You will need to import the TMC26XStepper library into the Arduino IDE for this
+ * (https://github.com/trinamic/TMC26XStepper.git)
  */
-#if HAS_DRIVER(TMC26X)
+//#define HAVE_TMC26X
+#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
+  //#define X_IS_TMC26X
+  //#define X2_IS_TMC26X
+  //#define Y_IS_TMC26X
+  //#define Y2_IS_TMC26X
+  //#define Z_IS_TMC26X
+  //#define Z2_IS_TMC26X
+  //#define E0_IS_TMC26X
+  //#define E1_IS_TMC26X
+  //#define E2_IS_TMC26X
+  //#define E3_IS_TMC26X
+  //#define E4_IS_TMC26X
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -1076,21 +1042,39 @@
   #define E4_SENSE_RESISTOR   91
   #define E4_MICROSTEPS       16
 
-#endif // TMC26X
+#endif
 
 // @section tmc_smart
 
 /**
- * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- * You may also use software SPI if you wish to use general purpose IO pins.
+ * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2208 stepper UART-configurable stepper drivers
- * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
+ */
+//#define HAVE_TMC2130
+#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
+  //#define X_IS_TMC2130
+  //#define X2_IS_TMC2130
+  //#define Y_IS_TMC2130
+  //#define Y2_IS_TMC2130
+  //#define Z_IS_TMC2130
+  //#define Z2_IS_TMC2130
+  //#define E0_IS_TMC2130
+  //#define E1_IS_TMC2130
+  //#define E2_IS_TMC2130
+  //#define E3_IS_TMC2130
+  //#define E4_IS_TMC2130
+#endif
+
+/**
+ * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
  * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
@@ -1098,7 +1082,22 @@
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-#if HAS_TRINAMIC
+//#define HAVE_TMC2208
+#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
+  //#define X_IS_TMC2208
+  //#define X2_IS_TMC2208
+  //#define Y_IS_TMC2208
+  //#define Y2_IS_TMC2208
+  //#define Z_IS_TMC2208
+  //#define Z2_IS_TMC2208
+  //#define E0_IS_TMC2208
+  //#define E1_IS_TMC2208
+  //#define E2_IS_TMC2208
+  //#define E3_IS_TMC2208
+  //#define E4_IS_TMC2208
+#endif
+
+#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1253,12 +1252,25 @@
 // @section L6470
 
 /**
- * L6470 Stepper Driver options
- *
- * The Arduino-L6470 library is required for this stepper driver.
- * https://github.com/ameyer/Arduino-L6470
+ * Enable this section if you have L6470 motor drivers.
+ * You need to import the L6470 library into the Arduino IDE for this.
+ * (https://github.com/ameyer/Arduino-L6470)
  */
-#if HAS_DRIVER(L6470)
+
+//#define HAVE_L6470DRIVER
+#if ENABLED(HAVE_L6470DRIVER)
+
+  //#define X_IS_L6470
+  //#define X2_IS_L6470
+  //#define Y_IS_L6470
+  //#define Y2_IS_L6470
+  //#define Z_IS_L6470
+  //#define Z2_IS_L6470
+  //#define E0_IS_L6470
+  //#define E1_IS_L6470
+  //#define E2_IS_L6470
+  //#define E3_IS_L6470
+  //#define E4_IS_L6470
 
   #define X_MICROSTEPS      16 // number of microsteps
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
@@ -1304,7 +1316,7 @@
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
-#endif // L6470
+#endif
 
 /**
  * TWI/I2C BUS
@@ -1340,7 +1352,6 @@
 #define I2C_SLAVE_ADDRESS  0 // Set a value from 8 to 127 to act as a slave
 
 // @section extras
-
 /**
  * Spindle & Laser control
  *
@@ -1356,19 +1367,21 @@
  *
  * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
  */
-//#define SPINDLE_LASER_ENABLE
+#if ENABLED(TREX3)
+#define SPINDLE_LASER_ENABLE
+#endif
 #if ENABLED(SPINDLE_LASER_ENABLE)
 
-  #define SPINDLE_LASER_ENABLE_INVERT   false  // set to "true" if the on/off function is reversed
-  #define SPINDLE_LASER_PWM             true   // set to true if your controller supports setting the speed/power
-  #define SPINDLE_LASER_PWM_INVERT      true   // set to "true" if the speed/power goes up when you want it to go slower
-  #define SPINDLE_LASER_POWERUP_DELAY   5000   // delay in milliseconds to allow the spindle/laser to come up to speed/power
-  #define SPINDLE_LASER_POWERDOWN_DELAY 5000   // delay in milliseconds to allow the spindle to stop
-  #define SPINDLE_DIR_CHANGE            true   // set to true if your spindle controller supports changing spindle direction
-  #define SPINDLE_INVERT_DIR            false
-  #define SPINDLE_STOP_ON_DIR_CHANGE    true   // set to true if Marlin should stop the spindle before changing rotation direction
+#define SPINDLE_LASER_ENABLE_INVERT true // set to "true" if the on/off function is reversed
+#define SPINDLE_LASER_PWM false          // set to true if your controller supports setting the speed/power
+#define SPINDLE_LASER_PWM_INVERT true    // set to "true" if the speed/power goes up when you want it to go slower
+#define SPINDLE_LASER_POWERUP_DELAY 1    // delay in milliseconds to allow the spindle/laser to come up to speed/power
+#define SPINDLE_LASER_POWERDOWN_DELAY 1  // delay in milliseconds to allow the spindle to stop
+#define SPINDLE_DIR_CHANGE false         // set to true if your spindle controller supports changing spindle direction
+#define SPINDLE_INVERT_DIR false
+#define SPINDLE_STOP_ON_DIR_CHANGE false // set to true if Marlin should stop the spindle before changing rotation direction
 
-  /**
+/**
    *  The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
    *
    *  SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
@@ -1377,15 +1390,15 @@
    *  set the following for your controller (ALL MUST BE SET)
    */
 
-  #define SPEED_POWER_SLOPE    118.4
-  #define SPEED_POWER_INTERCEPT  0
-  #define SPEED_POWER_MIN     5000
-  #define SPEED_POWER_MAX    30000    // SuperPID router controller 0 - 30,000 RPM
+#define SPEED_POWER_SLOPE 118.4
+#define SPEED_POWER_INTERCEPT 0
+#define SPEED_POWER_MIN 5000
+#define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
 
-  //#define SPEED_POWER_SLOPE      0.3922
-  //#define SPEED_POWER_INTERCEPT  0
-  //#define SPEED_POWER_MIN       10
-  //#define SPEED_POWER_MAX      100      // 0-100%
+//#define SPEED_POWER_SLOPE      0.3922
+//#define SPEED_POWER_INTERCEPT  0
+//#define SPEED_POWER_MIN       10
+//#define SPEED_POWER_MAX      100      // 0-100%
 #endif
 
 /**
@@ -1432,7 +1445,7 @@
 /**
  * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
  */
-#define PINS_DEBUGGING
+//#define PINS_DEBUGGING
 
 /**
  * Auto-report temperatures with M155 S<seconds>
@@ -1486,28 +1499,38 @@
 /**
  * User-defined menu items that execute custom GCode
  */
- #if(ENABLED(UBL))
-  #define CUSTOM_USER_MENUS
-#endif
+ #define CUSTOM_USER_MENUS
 #if ENABLED(CUSTOM_USER_MENUS)
- //#define USER_SCRIPT_DONE "M117 User Script Done"
-  #define USER_SCRIPT_AUDIBLE_FEEDBACK
+  //#define USER_SCRIPT_DONE "M117 User Script Done"
+  //#define USER_SCRIPT_AUDIBLE_FEEDBACK
   #define USER_SCRIPT_RETURN  // Return to status screen after a script
+  #define MSG_USER_MENU "Setup Menu"
 
-    #define USER_DESC_1 "UBL Commission Step 1"
-  #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S75 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
- 
-  #define USER_DESC_2 "UBL Commission Step 2"
-  #define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
+  #if ENABLED(TREX3)
+    #define COMMFANNSPEED " "
+  #else
+    #define COMMFANNSPEED  "M106 S128 \n"
+  #endif
 
-  #define USER_DESC_3 "Prep for Z Adjust"
-  #define USER_GCODE_3 "M190 75 \n M104 235 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n"
+  #define USER_DESC_1 "1. Run UBL"
+  #define USER_DESC_2 "2. Set Z Offset"
 
-   #define USER_DESC_4 "Fill Mesh Points"
-  #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n"
+  #if ENABLED(ABL_Bilinear)
+    #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S60 \n T0 \n G28 \n G29 \n M500 \n G28 \n M420 S1 \n " COMMFANNSPEED " M109 S225 \n G1 X100 Y 100 \n G1 Z0 \n M77 \n M400 \n M117 Set Z Offset"
+    #define USER_GCODE_2 "M190 S60 \n " COMMFANNSPEED " M104 235 \n G28 \n M420 S1 \n G1 X100 Y 100 \n G1 Z0"
+  #else
+    #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S60 \n T0 \n G28 \n G29 P1 \n G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n " COMMFANNSPEED " M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M77 \n M117 Set Z Offset"
+    #define USER_GCODE_2 "M190 S60 \n " COMMFANNSPEED " M104 235 \n G28 \n G29 L1 \n G1 X100 Y 100 \n G1 Z0"
+  #endif
 
-   #define USER_DESC_5 "Run Mesh Validation"
-  #define USER_GCODE_5 "G26 \n"
+  #define USER_DESC_3 "Store Settings"
+  #define USER_GCODE_3 "M500"
+
+  #define USER_DESC_5 "PID Tune Bed"
+  #define USER_GCODE_5 "M303E-1S75U \n M500 \n M117 PID Bed Done"
+
+  #define USER_DESC_4 "PID Tune Tool 1"
+  #define USER_GCODE_4 "M106 S128 \n M303 C8 S225 E0 U \n M500 \n M117 PID Tune L Done"
 #endif
 
 /**
@@ -1612,29 +1635,27 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
- * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
+ * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ *
+ * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
+ * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64
-  #define MAX7219_DIN_PIN   57
-  #define MAX7219_LOAD_PIN  44
+  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
+  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
+  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
 
-  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
-  #define MAX7219_INIT_TEST    2   // Do a test pattern at initialization (Set to 2 for spiral)
-  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
-  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
-                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1652,7 +1673,4 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
-// Enable Marlin dev mode which adds some special commands
-//#define MARLIN_DEV_MODE
-
-#endif // CONFIGURATION_ADV_H
+#endif // CONFIGURATION_ADV_H

Marlin/Marlin.h

@@ -55,7 +55,8 @@ void manage_inactivity(const bool ignore_stepper_queue=false);
 extern const char axis_codes[XYZE];
 
 #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  extern bool extruder_duplication_enabled;
+  extern bool extruder_duplication_enabled,
+              mirrored_duplication_mode;
 #endif
 
 #if HAS_X2_ENABLE

Marlin/Marlin_main.cpp

@@ -601,13 +601,7 @@ uint8_t target_extruder;
 #endif
 
 #if HAS_POWER_SWITCH
-  bool powersupply_on = (
-    #if ENABLED(PS_DEFAULT_OFF)
-      false
-    #else
-      true
-    #endif
-  );
+  bool powersupply_on;
   #if ENABLED(AUTO_POWER_CONTROL)
     #define PSU_ON()  powerManager.power_on()
     #define PSU_OFF() powerManager.power_off()
@@ -943,9 +937,9 @@ void setup_powerhold() {
   #endif
   #if HAS_POWER_SWITCH
     #if ENABLED(PS_DEFAULT_OFF)
-      PSU_OFF();
+      powersupply_on = true;  PSU_OFF();
     #else
-      PSU_ON();
+      powersupply_on = false; PSU_ON();
     #endif
   #endif
 }
@@ -1311,7 +1305,8 @@ bool get_target_extruder_from_command(const uint16_t code) {
 }
 
 #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  bool extruder_duplication_enabled = false; // Used in Dual X mode 2
+  bool extruder_duplication_enabled,
+       mirrored_duplication_mode;
 #endif
 
 #if ENABLED(DUAL_X_CARRIAGE)
@@ -1383,7 +1378,11 @@ bool get_target_extruder_from_command(const uint16_t code) {
       }
     #elif ENABLED(DELTA)
       soft_endstop_min[axis] = base_min_pos(axis);
-      soft_endstop_max[axis] = axis == Z_AXIS ? delta_height : base_max_pos(axis);
+      soft_endstop_max[axis] = axis == Z_AXIS ? delta_height
+      #if HAS_BED_PROBE
+        - zprobe_zoffset
+      #endif
+      : base_max_pos(axis);
     #else
       soft_endstop_min[axis] = base_min_pos(axis);
       soft_endstop_max[axis] = base_max_pos(axis);
@@ -1512,13 +1511,14 @@ static void set_axis_is_at_home(const AxisEnum axis) {
     }
     else
   #elif ENABLED(DELTA)
-    if (axis == Z_AXIS)
-      current_position[axis] = delta_height;
-    else
-  #endif
-  {
+    current_position[axis] = (axis == Z_AXIS ? delta_height
+    #if HAS_BED_PROBE
+      - zprobe_zoffset
+    #endif
+    : base_home_pos(axis));
+  #else
     current_position[axis] = base_home_pos(axis);
-  }
+  #endif
 
   /**
    * Z Probe Z Homing? Account for the probe's Z offset.
@@ -2093,7 +2093,17 @@ void clean_up_after_endstop_or_probe_move() {
         }
       }
 
+      #if ENABLED(BLTOUCH_FORCE_5V_MODE)
+        bltouch_command(BLTOUCH_5V_MODE);
+      #elif ENABLED(BLTOUCH_V3)
+        bltouch_command(BLTOUCH_OD_MODE);
+      #endif
+
       bltouch_command(deploy ? BLTOUCH_DEPLOY : BLTOUCH_STOW);
+      
+      #if ENABLED(BLTOUCH_V3)
+        if (deploy) bltouch_command(BLTOUCH_SW_MODE);
+      #endif
 
       #if ENABLED(DEBUG_LEVELING_FEATURE)
         if (DEBUGGING(LEVELING)) {
@@ -4062,7 +4072,11 @@ inline void gcode_G4() {
     #endif
 
     // Move all carriages together linearly until an endstop is hit.
-    current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (delta_height + 10);
+    current_position[X_AXIS] = current_position[Y_AXIS] = current_position[Z_AXIS] = (delta_height + 10
+      #if HAS_BED_PROBE
+        - zprobe_zoffset
+      #endif
+    );
     feedrate_mm_s = homing_feedrate(X_AXIS);
     buffer_line_to_current_position();
     planner.synchronize();
@@ -4591,7 +4605,7 @@ void home_all_axes() { gcode_G28(true); }
         if (parser.seenval('X')) {
           px = parser.value_int() - 1;
           if (!WITHIN(px, 0, GRID_MAX_POINTS_X - 1)) {
-            SERIAL_PROTOCOLPAIR("X out of range (0-", int(GRID_MAX_POINTS_X));
+            SERIAL_PROTOCOLPAIR("X out of range (1-", int(GRID_MAX_POINTS_X));
             SERIAL_PROTOCOLLNPGM(")");
             return;
           }
@@ -4604,7 +4618,7 @@ void home_all_axes() { gcode_G28(true); }
         if (parser.seenval('Y')) {
           py = parser.value_int() - 1;
           if (!WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) {
-            SERIAL_PROTOCOLPAIR("Y out of range (0-", int(GRID_MAX_POINTS_Y));
+            SERIAL_PROTOCOLPAIR("Y out of range (1-", int(GRID_MAX_POINTS_Y));
             SERIAL_PROTOCOLLNPGM(")");
             return;
           }
@@ -5750,12 +5764,6 @@ void home_all_axes() { gcode_G28(true); }
     if ((!end_stops && tower_angles) || (end_stops && !tower_angles)) { // XOR
       SERIAL_PROTOCOLPAIR("  Radius:", delta_radius);
     }
-    #if HAS_BED_PROBE
-      if (!end_stops && !tower_angles) {
-        SERIAL_PROTOCOL_SP(30);
-        print_signed_float(PSTR("Offset"), zprobe_zoffset);
-      }
-    #endif
     SERIAL_EOL();
   }
 
@@ -5804,30 +5812,19 @@ void home_all_axes() { gcode_G28(true); }
   /**
    *  - Probe a point
    */
-  static float calibration_probe(const float &nx, const float &ny, const bool stow, const bool set_up) {
+  static float calibration_probe(const float &nx, const float &ny, const bool stow) {
     #if HAS_BED_PROBE
-      return probe_pt(nx, ny, set_up ? PROBE_PT_BIG_RAISE : stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
+      return probe_pt(nx, ny, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
     #else
       UNUSED(stow);
-      UNUSED(set_up);
       return lcd_probe_pt(nx, ny);
     #endif
   }
 
-  #if HAS_BED_PROBE && ENABLED(ULTIPANEL)
-    static float probe_z_shift(const float center) {
-      STOW_PROBE();
-      endstops.enable_z_probe(false);
-      float z_shift = lcd_probe_pt(0, 0) - center;
-      endstops.enable_z_probe(true);
-      return z_shift;
-    }
-  #endif
-
   /**
    *  - Probe a grid
    */
-  static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_points, const bool towers_set, const bool stow_after_each, const bool set_up) {
+  static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_points, const bool towers_set, const bool stow_after_each) {
     const bool _0p_calibration      = probe_points == 0,
                _1p_calibration      = probe_points == 1 || probe_points == -1,
                _4p_calibration      = probe_points == 2,
@@ -5850,7 +5847,7 @@ void home_all_axes() { gcode_G28(true); }
     if (!_0p_calibration) {
 
       if (!_7p_no_intermediates && !_7p_4_intermediates && !_7p_11_intermediates) { // probe the center
-        z_pt[CEN] += calibration_probe(0, 0, stow_after_each, set_up);
+        z_pt[CEN] += calibration_probe(0, 0, stow_after_each);
         if (isnan(z_pt[CEN])) return false;
       }
 
@@ -5860,7 +5857,7 @@ void home_all_axes() { gcode_G28(true); }
         I_LOOP_CAL_PT(rad, start, steps) {
           const float a = RADIANS(210 + (360 / NPP) *  (rad - 1)),
                       r = delta_calibration_radius * 0.1;
-          z_pt[CEN] += calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up);
+          z_pt[CEN] += calibration_probe(cos(a) * r, sin(a) * r, stow_after_each);
           if (isnan(z_pt[CEN])) return false;
        }
         z_pt[CEN] /= float(_7p_2_intermediates ? 7 : probe_points);
@@ -5884,7 +5881,7 @@ void home_all_axes() { gcode_G28(true); }
             const float a = RADIANS(210 + (360 / NPP) *  (rad - 1)),
                         r = delta_calibration_radius * (1 - 0.1 * (zig_zag ? offset - circle : circle)),
                         interpol = fmod(rad, 1);
-            const float z_temp = calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up);
+            const float z_temp = calibration_probe(cos(a) * r, sin(a) * r, stow_after_each);
             if (isnan(z_temp)) return false;
             // split probe point to neighbouring calibration points
             z_pt[uint8_t(LROUND(rad - interpol + NPP - 1)) % NPP + 1] += z_temp * sq(cos(RADIANS(interpol * 90)));
@@ -6013,10 +6010,7 @@ void home_all_axes() { gcode_G28(true); }
    *
    * Parameters:
    *
-   *   S   Setup mode; disables probe protection
-   *
    *   Pn  Number of probe points:
-   *      P-1      Checks the z_offset with a center probe and paper test.
    *      P0       Normalizes calibration.
    *      P1       Calibrates height only with center probe.
    *      P2       Probe center and towers. Calibrate height, endstops and delta radius.
@@ -6039,22 +6033,15 @@ void home_all_axes() { gcode_G28(true); }
    */
   inline void gcode_G33() {
 
-    const bool set_up =
-      #if HAS_BED_PROBE
-        parser.seen('S');
-      #else
-        false;
-      #endif
-
-    const int8_t probe_points = set_up ? 2 : parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
-    if (!WITHIN(probe_points, -1, 10)) {
-      SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (-1 - 10).");
+    const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
+    if (!WITHIN(probe_points, 0, 10)) {
+      SERIAL_PROTOCOLLNPGM("?(P)oints is implausible (0-10).");
       return;
     }
 
     const bool towers_set = !parser.seen('T');
 
-    const float calibration_precision = set_up ? Z_CLEARANCE_BETWEEN_PROBES / 5.0 : parser.floatval('C', 0.0);
+    const float calibration_precision = parser.floatval('C', 0.0);
     if (calibration_precision < 0) {
       SERIAL_PROTOCOLLNPGM("?(C)alibration precision is implausible (>=0).");
       return;
@@ -6062,26 +6049,18 @@ void home_all_axes() { gcode_G28(true); }
 
     const int8_t force_iterations = parser.intval('F', 0);
     if (!WITHIN(force_iterations, 0, 30)) {
-      SERIAL_PROTOCOLLNPGM("?(F)orce iteration is implausible (0 - 30).");
+      SERIAL_PROTOCOLLNPGM("?(F)orce iteration is implausible (0-30).");
       return;
     }
 
     const int8_t verbose_level = parser.byteval('V', 1);
     if (!WITHIN(verbose_level, 0, 3)) {
-      SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0 - 3).");
+      SERIAL_PROTOCOLLNPGM("?(V)erbose level is implausible (0-3).");
       return;
     }
 
     const bool stow_after_each = parser.seen('E');
 
-    if (set_up) {
-      delta_height = 999.99;
-      delta_radius = DELTA_PRINTABLE_RADIUS;
-      ZERO(delta_endstop_adj);
-      ZERO(delta_tower_angle_trim);
-      recalc_delta_settings();
-    }
-
     const bool _0p_calibration      = probe_points == 0,
                _1p_calibration      = probe_points == 1 || probe_points == -1,
                _4p_calibration      = probe_points == 2,
@@ -6130,7 +6109,6 @@ void home_all_axes() { gcode_G28(true); }
     const char *checkingac = PSTR("Checking... AC");
     serialprintPGM(checkingac);
     if (verbose_level == 0) SERIAL_PROTOCOLPGM(" (DRY-RUN)");
-    if (set_up) SERIAL_PROTOCOLPGM("  (SET-UP)");
     SERIAL_EOL();
     lcd_setstatusPGM(checkingac);
 
@@ -6149,7 +6127,7 @@ void home_all_axes() { gcode_G28(true); }
 
       // Probe the points
       zero_std_dev_old = zero_std_dev;
-      if (!probe_calibration_points(z_at_pt, probe_points, towers_set, stow_after_each, set_up)) {
+      if (!probe_calibration_points(z_at_pt, probe_points, towers_set, stow_after_each)) {
         SERIAL_PROTOCOLLNPGM("Correct delta settings with M665 and M666");
         return AC_CLEANUP();
       }
@@ -6197,11 +6175,6 @@ void home_all_axes() { gcode_G28(true); }
         delta_calibration_radius = cr_old;
 
         switch (probe_points) {
-          case -1:
-            #if HAS_BED_PROBE && ENABLED(ULTIPANEL)
-              zprobe_zoffset += probe_z_shift(z_at_pt[CEN]);
-            #endif
-
           case 0:
             test_precision = 0.00; // forced end
             break;
@@ -8271,7 +8244,7 @@ inline void gcode_M104() {
     thermalManager.setTargetHotend(temp, target_extruder);
 
     #if ENABLED(DUAL_X_CARRIAGE)
-      if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
+      if (dual_x_carriage_mode >= DXC_DUPLICATION_MODE && target_extruder == 0)
         thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
     #endif
 
@@ -8426,7 +8399,7 @@ inline void gcode_M109() {
     thermalManager.setTargetHotend(temp, target_extruder);
 
     #if ENABLED(DUAL_X_CARRIAGE)
-      if (dual_x_carriage_mode == DXC_DUPLICATION_MODE && target_extruder == 0)
+      if (dual_x_carriage_mode >= DXC_DUPLICATION_MODE && target_extruder == 0)
         thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
     #endif
 
@@ -10105,7 +10078,7 @@ inline void gcode_M226() {
         NOLESS(thermalManager.lpq_len, 0);
       #endif
 
-      thermalManager.updatePID();
+      thermalManager.update_pid();
       SERIAL_ECHO_START();
       #if ENABLED(PID_PARAMS_PER_HOTEND)
         SERIAL_ECHOPAIR(" e:", e); // specify extruder in serial output
@@ -10251,7 +10224,7 @@ inline void gcode_M303() {
       KEEPALIVE_STATE(NOT_BUSY);
     #endif
 
-    thermalManager.PID_autotune(temp, e, c, u);
+    thermalManager.pid_autotune(temp, e, c, u);
 
     #if DISABLED(BUSY_WHILE_HEATING)
       KEEPALIVE_STATE(IN_HANDLER);
@@ -11104,47 +11077,80 @@ inline void gcode_M502() {
 
 #if ENABLED(DUAL_X_CARRIAGE)
 
-  /**
+/**
    * M605: Set dual x-carriage movement mode
    *
-   *    M605 S0: Full control mode. The slicer has full control over x-carriage movement
-   *    M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement
-   *    M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn
-   *                         units x-offset and an optional differential hotend temperature of
-   *                         mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate
-   *                         the first with a spacing of 100mm in the x direction and 2 degrees hotter.
+   *   M605 S0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
+   *             results as long as it supports dual X-carriages.
    *
-   *    Note: the X axis should be homed after changing dual x-carriage mode.
+   *   M605 S1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so that
+   *             additional slicer support is not required.
+   *
+   *   M605 S2 X R : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
+   *             the first X-carriage and extruder, to print 2 copies of the same object at the same time.
+   *             Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
+   *             follow with "M605 S2" to initiate duplicated movement. For example, use "M605 S2 X100 R2" to
+   *             make a copy 100mm to the right with E1 2° hotter than E0.
+   *
+   *   M605 S3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
+   *             the movement of the first except the second extruder is reversed in the X axis.
+   *             The temperature differential and initial X offset must be set with "M605 S2 X[offs] R[deg]",
+   *             then followed by "M605 S3" to initiate mirrored movement.
+   *
+   *    M605 W  : IDEX What? command.
+   *
+   *    Note: the X axis should be homed after changing Dual X-carriage mode.
    */
   inline void gcode_M605() {
-    planner.synchronize();
+
+     planner.synchronize();
+
+    const DualXMode previous_mode = dual_x_carriage_mode;
     if (parser.seen('S')) dual_x_carriage_mode = (DualXMode)parser.value_byte();
-    switch (dual_x_carriage_mode) {
-      case DXC_FULL_CONTROL_MODE:
-      case DXC_AUTO_PARK_MODE:
-        break;
-      case DXC_DUPLICATION_MODE:
-        if (parser.seen('X')) duplicate_extruder_x_offset = MAX(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0));
-        if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
-        SERIAL_ECHO_START();
-        SERIAL_ECHOPGM(MSG_HOTEND_OFFSET);
-        SERIAL_CHAR(' ');
-        SERIAL_ECHO(hotend_offset[X_AXIS][0]);
-        SERIAL_CHAR(',');
-        SERIAL_ECHO(hotend_offset[Y_AXIS][0]);
-        SERIAL_CHAR(' ');
-        SERIAL_ECHO(duplicate_extruder_x_offset);
-        SERIAL_CHAR(',');
-        SERIAL_ECHOLN(hotend_offset[Y_AXIS][1]);
-        break;
-      default:
-        dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
-        break;
+      SERIAL_ECHOLNPAIR("Mode Change ", dual_x_carriage_mode);
+      SERIAL_ECHOLNPAIR("From Mode ", previous_mode);
+
+      mirrored_duplication_mode = false;
+
+      if (dual_x_carriage_mode == DXC_MIRRORED_MODE) {
+        if (previous_mode != DXC_DUPLICATION_MODE) {
+          SERIAL_ECHOLN("Printer must be in DXC_DUPLICATION_MODE prior to ");
+          SERIAL_ECHOLN("specifying DXC_MIRRORED_MODE.");
+          dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
+          return;
+        }
+        SERIAL_ECHOLN("DXC_MIRRORED_MODE Set");
+        mirrored_duplication_mode = true;
+        float x_jog = current_position[X_AXIS] - .1;
+        for (uint8_t i = 2; --i;) {
+          planner.buffer_line(x_jog, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, 0);
+          x_jog += .1;
+        }
+        return;
+      }
+
+      switch (dual_x_carriage_mode) {
+        case DXC_FULL_CONTROL_MODE:
+          SERIAL_ECHOLN("DXC_FULL_CONTROL_MODE Set");
+          break;
+        case DXC_AUTO_PARK_MODE:
+          SERIAL_ECHOLN("DXC_AUTO_PARK_MODE Set");
+          break;
+        case DXC_DUPLICATION_MODE:
+          SERIAL_ECHOLN("DXC_DUPLICATION_MODE Set");
+          if (parser.seen('X')) duplicate_extruder_x_offset = max(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0));
+          if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff();
+          if (active_extruder != 0) tool_change(0);
+          break;
+        default:
+          SERIAL_ECHOLN("Default Mode Set");
+          dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE;
+          break;
+      }
+      active_extruder_parked = false;
+      extruder_duplication_enabled = false;
+      delayed_move_time = 0;
     }
-    active_extruder_parked = false;
-    extruder_duplication_enabled = false;
-    delayed_move_time = 0;
-  }
 
 #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
 
@@ -14638,7 +14644,7 @@ void prepare_move_to_destination() {
 
 #if ENABLED(TEMP_STAT_LEDS)
 
-  static bool red_led = false;
+  static uint8_t red_led = -1;  // Invalid value to force leds initializzation on startup
   static millis_t next_status_led_update_ms = 0;
 
   void handle_status_leds(void) {
@@ -14646,20 +14652,18 @@ void prepare_move_to_destination() {
       next_status_led_update_ms += 500; // Update every 0.5s
       float max_temp = 0.0;
       #if HAS_HEATED_BED
-        max_temp = MAX3(max_temp, thermalManager.degTargetBed(), thermalManager.degBed());
+        max_temp = MAX(thermalManager.degTargetBed(), thermalManager.degBed());
       #endif
       HOTEND_LOOP()
         max_temp = MAX3(max_temp, thermalManager.degHotend(e), thermalManager.degTargetHotend(e));
-      const bool new_led = (max_temp > 55.0) ? true : (max_temp < 54.0) ? false : red_led;
+      const uint8_t new_led = (max_temp > 55.0) ? HIGH : (max_temp < 54.0 || red_led == -1) ? LOW : red_led;
       if (new_led != red_led) {
         red_led = new_led;
         #if PIN_EXISTS(STAT_LED_RED)
-          WRITE(STAT_LED_RED_PIN, new_led ? HIGH : LOW);
-          #if PIN_EXISTS(STAT_LED_BLUE)
-            WRITE(STAT_LED_BLUE_PIN, new_led ? LOW : HIGH);
-          #endif
-        #else
-          WRITE(STAT_LED_BLUE_PIN, new_led ? HIGH : LOW);
+          WRITE(STAT_LED_RED_PIN, new_led);
+        #endif
+        #if PIN_EXISTS(STAT_LED_BLUE)
+          WRITE(STAT_LED_BLUE_PIN, !new_led);
         #endif
       }
     }

Marlin/Version.h

@@ -35,20 +35,20 @@
   /**
    * Marlin release version identifier
    */
-  #define SHORT_BUILD_VERSION "1.1.9-R4"
+  #define SHORT_BUILD_VERSION "M119 Trex B3"
 
   /**
    * Verbose version identifier which should contain a reference to the location
    * from where the binary was downloaded or the source code was compiled.
    */
-  #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
+  #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
 
   /**
    * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
    * here we define this default string as the date where the latest release
    * version was tagged.
    */
-  #define STRING_DISTRIBUTION_DATE "2019-01-10"
+  #define STRING_DISTRIBUTION_DATE "2019-06-22"
 
   /**
    * Required minimum Configuration.h and Configuration_adv.h file versions.
@@ -70,7 +70,7 @@
   /**
    * Defines a generic printer name to be output to the LCD after booting Marlin.
    */
-  #define MACHINE_NAME "TM3D Raptor"
+  #define MACHINE_NAME "TM3DTrex"
 
   /**
    * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -78,7 +78,7 @@
    * has a distinct Github fork— the Source Code URL should just be the main
    * Marlin repository.
    */
-  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
+  #define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/Trex3_1.1.9"
 
   /**
    * Default generic printer UUID.

Marlin/_Bootscreen.h

@@ -103,4 +103,3 @@ const unsigned char custom_start_bmp[] PROGMEM = {
 };
 
 
-

Marlin/_Statusscreen.h

@@ -259,202 +259,214 @@ const unsigned char status_screen3_bmp[] PROGMEM = {
 
   #if FAN_ANIM_FRAMES <= 2
 
-    const unsigned char status_screen0_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
-    };
-    const unsigned char status_screen1_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
-    };
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
 
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+   
   #elif FAN_ANIM_FRAMES == 3
 
     const unsigned char status_screen0_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
-    };
-    const unsigned char status_screen1_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
-    };
-    const unsigned char status_screen2_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
-    };
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
 
   #elif FAN_ANIM_FRAMES == 4
 
     const unsigned char status_screen0_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
-    };
-    const unsigned char status_screen1_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
-    };
-    const unsigned char status_screen2_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
-    };
-    const unsigned char status_screen3_bmp[] PROGMEM = {
-      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
-      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
-      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
-      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
-      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
-      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
-      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
-      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
-      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
-      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
-      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
-      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
-      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
-    };
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen3_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
 
   #endif
 
-#endif // HOTENDS >= 2
+#endif // HOTENDS >= 2

Marlin/boards.h

@@ -74,6 +74,8 @@
 #define BOARD_AZTEEG_X3_PRO     68    // Azteeg X3 Pro
 #define BOARD_ULTIMAIN_2        72    // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 #define BOARD_RUMBA             80    // Rumba
+#define BOARD_FORMBOT_TREX2PLUS 95    // Formbot T-Rex 2 Plus
+#define BOARD_FORMBOT_TREX3     96    // Formbot T-Rex 3
 #define BOARD_BQ_ZUM_MEGA_3D    503   // bq ZUM Mega 3D
 #define BOARD_MAKEBOARD_MINI    431   // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
 #define BOARD_TRIGORILLA_13     343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB

Marlin/configuration_store.cpp

@@ -308,7 +308,7 @@ void MarlinSettings::postprocess() {
   #endif
 
   #if ENABLED(PIDTEMP)
-    thermalManager.updatePID();
+    thermalManager.update_pid();
   #endif
 
   #if DISABLED(NO_VOLUMETRICS)

Marlin/enum.h

@@ -157,10 +157,11 @@ enum LCDViewAction : char {
  * Dual X Carriage modes. A Dual Nozzle can also do duplication.
  */
 #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  enum DualXMode : char {
-    DXC_FULL_CONTROL_MODE,  // DUAL_X_CARRIAGE only
-    DXC_AUTO_PARK_MODE,     // DUAL_X_CARRIAGE only
-    DXC_DUPLICATION_MODE
+enum DualXMode : char {
+    DXC_FULL_CONTROL_MODE,
+    DXC_AUTO_PARK_MODE,
+    DXC_DUPLICATION_MODE,
+    DXC_MIRRORED_MODE
   };
 #endif
 

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -743,6 +743,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1124,6 +1135,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A2plus/Configuration.h

@@ -762,6 +762,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1179,6 +1190,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A6/Configuration.h

@@ -141,8 +141,8 @@
 // :[1, 2, 3, 4, 5]
 #define EXTRUDERS 1
 
-// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
-#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
+// The Anet A6 original extruder is designed for 1.75mm
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
@@ -771,6 +771,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1243,6 +1254,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -413,9 +413,9 @@
  * heater. If your configuration is significantly different than this and you don't understand
  * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  */
-//#define PIDTEMPBED
+#define PIDTEMPBED
 
-#define BED_LIMIT_SWITCHING
+//#define BED_LIMIT_SWITCHING
 
 /**
  * Max Bed Power
@@ -431,9 +431,9 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define DEFAULT_bedKp 10.00
-  #define DEFAULT_bedKi .023
-  #define DEFAULT_bedKd 305.4
+  //#define DEFAULT_bedKp 10.00
+  //#define DEFAULT_bedKi .023
+  //#define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
@@ -441,6 +441,12 @@
   //#define DEFAULT_bedKi 1.41
   //#define DEFAULT_bedKd 1675.16
 
+  // ANET A8
+  // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5):
+  #define DEFAULT_bedKp 295.00
+  #define DEFAULT_bedKi 35.65
+  #define DEFAULT_bedKd 610.21
+
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
@@ -730,6 +736,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1111,6 +1128,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BIBO/TouchX/default/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -711,6 +711,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1092,6 +1103,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/Hephestos_2/Configuration.h

@@ -724,6 +724,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1102,6 +1113,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -711,6 +711,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1092,6 +1103,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Cartesio/Configuration.h

@@ -722,6 +722,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1103,6 +1114,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -733,6 +733,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1114,6 +1125,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1152,7 +1164,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Creality/CR-10S/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1109,6 +1120,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1147,7 +1159,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Creality/CR-10mini/Configuration.h

@@ -620,7 +620,7 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.60, 80, 400, 229.4 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 79.60, 80, 400, 95 }
 
 /**
  * Default Max Feed Rate (mm/s)
@@ -742,6 +742,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1123,6 +1134,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1161,7 +1173,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Creality/CR-8/Configuration.h

@@ -733,6 +733,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1114,6 +1125,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1152,7 +1164,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Creality/Ender-2/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1146,7 +1158,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Creality/Ender-3/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -876,8 +887,8 @@
 // @section machine
 
 // The size of the print bed
-#define X_BED_SIZE 220
-#define Y_BED_SIZE 220
+#define X_BED_SIZE 235
+#define Y_BED_SIZE 235
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Creality/Ender-4/Configuration.h

@@ -733,6 +733,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1114,6 +1125,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 
@@ -1152,7 +1164,7 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (20*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate

Marlin/example_configurations/Felix/Configuration.h

@@ -705,6 +705,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1086,6 +1097,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Felix/DUAL/Configuration.h

@@ -705,6 +705,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1086,6 +1097,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h

@@ -729,6 +729,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1110,6 +1121,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/GT2560/Configuration.h

@@ -738,6 +738,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1119,6 +1130,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   #define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h

@@ -739,6 +739,17 @@
 #define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1120,6 +1131,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h

@@ -738,6 +738,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1119,6 +1130,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Infitary/i3-M508/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/JGAurora/A5/Configuration.h

@@ -735,6 +735,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1115,6 +1126,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Malyan/M150/Configuration.h

@@ -743,6 +743,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1132,6 +1143,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Micromake/C1/basic/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h

@@ -727,6 +727,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RepRapPro/Huxley/Configuration.h

@@ -763,6 +763,17 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1153,6 +1164,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/RigidBot/Configuration.h

@@ -721,6 +721,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1102,6 +1113,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/SCARA/Configuration.h

@@ -736,6 +736,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1117,6 +1128,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Sanguinololu/Configuration.h

@@ -754,6 +754,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1135,6 +1146,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/TinyBoy2/Configuration.h

@@ -774,6 +774,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1163,6 +1174,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X1/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X3A/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1108,6 +1119,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/X5S/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Tronxy/XY100/Configuration.h

@@ -734,6 +734,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1115,6 +1126,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8200/Configuration.h

@@ -752,6 +752,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1134,6 +1145,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8400/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h

@@ -733,6 +733,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1114,6 +1125,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/adafruit/ST7565/Configuration.h

@@ -723,6 +723,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1104,6 +1115,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h

@@ -862,6 +862,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1302,6 +1313,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/Anycubic/Kossel/README.md

@@ -26,10 +26,10 @@ The Kossel comes in 3 versions:
  * Pulley
  * Linear
  * Linear Plus
- 
+
 Pulley and Linear use the same configuration, the Linear Plus is bigger and uses slightly different configurations.
- 
-Typically the probes for the Anycubic Delta Kossel printers come in two different versions. 
+
+Typically the probes for the Anycubic Delta Kossel printers come in two different versions.
 
   * Version 1: Z Probe Offset of -19.0mm
 

Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h

@@ -808,6 +808,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1240,6 +1251,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h

@@ -808,6 +808,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1239,6 +1250,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h

@@ -808,6 +808,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1239,6 +1250,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h

@@ -813,6 +813,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1242,6 +1253,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/generic/Configuration.h

@@ -798,6 +798,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1227,6 +1238,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_mini/Configuration.h

@@ -798,6 +798,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1229,6 +1240,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_pro/Configuration.h

@@ -791,6 +791,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1230,6 +1241,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/delta/kossel_xl/Configuration.h

@@ -801,6 +801,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1230,6 +1241,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h

@@ -736,6 +736,17 @@
 #define BLTOUCH
 #if ENABLED(BLTOUCH)
   #define BLTOUCH_DELAY 500   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1118,6 +1129,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/hangprinter/Configuration.h

@@ -861,6 +861,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1275,6 +1286,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/makibox/Configuration.h

@@ -726,6 +726,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1107,6 +1118,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/tvrrug/Round2/Configuration.h

@@ -718,6 +718,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1099,6 +1110,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/example_configurations/wt150/Configuration.h

@@ -728,6 +728,17 @@
 //#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
+  
+  /**
+   * BLTouch V3.0 and newer smart series
+   * For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
+   * If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
+   */
+  //#define BLTOUCH_V3
+  #if ENABLED(BLTOUCH_V3)
+    //#define BLTOUCH_FORCE_5V_MODE
+    //#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
+  #endif
 #endif
 
 /**
@@ -1109,6 +1120,7 @@
 
 #if ENABLED(LEVEL_BED_CORNERS)
   #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  #define LEVEL_CORNERS_Z_HOP  4.0  // (mm) Move nozzle up before moving between corners
   //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
 #endif
 

Marlin/language_cz.h

@@ -41,11 +41,16 @@
 #define MSG_SD_INSERTED                     _UxGT("Karta vlozena")
 #define MSG_SD_REMOVED                      _UxGT("Karta vyjmuta")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstopy") // max 8 znaku
+#define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft Endstopy")
 #define MSG_MAIN                            _UxGT("Hlavni nabidka")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
 #define MSG_DISABLE_STEPPERS                _UxGT("Uvolnit motory")
 #define MSG_DEBUG_MENU                      _UxGT("Nabidka ladeni")
-#define MSG_PROGRESS_BAR_TEST               _UxGT("Test uk.prubehu")
+#if LCD_WIDTH >= 20
+  #define MSG_PROGRESS_BAR_TEST             _UxGT("Test ukaz. prubehu")
+#else
+  #define MSG_PROGRESS_BAR_TEST             _UxGT("Test uk. prubehu")
+#endif
 #define MSG_AUTO_HOME                       _UxGT("Domovska pozice")
 #define MSG_AUTO_HOME_X                     _UxGT("Domu osa X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Domu osa Y")
@@ -91,7 +96,7 @@
 #define MSG_UBL_BC_INSERT                   _UxGT("Vlozte kartu, zmerte")
 #define MSG_UBL_BC_INSERT2                  _UxGT("Zmerte")
 #define MSG_UBL_BC_REMOVE                   _UxGT("Odstrante a zmerte")
-#define MSG_UBL_MOVING_TO_NEXT              _UxGT("Presoun na dalsi")
+#define MSG_UBL_MOVING_TO_NEXT              _UxGT("Presun na dalsi")
 #define MSG_UBL_ACTIVATE_MESH               _UxGT("Aktivovat UBL")
 #define MSG_UBL_DEACTIVATE_MESH             _UxGT("Deaktivovat UBL")
 #define MSG_UBL_SET_BED_TEMP                _UxGT("Teplota podlozky")
@@ -125,7 +130,7 @@
 #define MSG_UBL_OUTPUT_MAP_CSV              _UxGT("Exportovat do CSV")
 #define MSG_UBL_OUTPUT_MAP_BACKUP           _UxGT("Zaloha do PC")
 #define MSG_UBL_INFO_UBL                    _UxGT("Info o UBL do PC")
-#define MSG_UBL_EDIT_MESH_MENU              _UxGT("Upravit sit dobu")
+#define MSG_UBL_EDIT_MESH_MENU              _UxGT("Upravit sit bodu")
 #define MSG_UBL_FILLIN_AMOUNT               _UxGT("Hustota mrizky")
 #define MSG_UBL_MANUAL_FILLIN               _UxGT("Rucni hustota")
 #define MSG_UBL_SMART_FILLIN                _UxGT("Chytra hustota")
@@ -139,14 +144,14 @@
 #define MSG_UBL_LOAD_MESH                   _UxGT("Nacist sit bodu")
 #define MSG_UBL_SAVE_MESH                   _UxGT("Ulozit sit bodu")
 #define MSG_MESH_LOADED                     _UxGT("Sit %i nactena")
-#define MSG_NO_STORAGE                      _UxGT("Nedostatek mista")
 #define MSG_MESH_SAVED                      _UxGT("Sit %i ulozena")
-#define MSG_UBL_SAVE_ERROR                  _UxGT("Err: Ulozit UBL")
-#define MSG_UBL_RESTORE_ERROR               _UxGT("Err: Obnovit UBL")
+#define MSG_NO_STORAGE                      _UxGT("Nedostatek mista")
+#define MSG_UBL_SAVE_ERROR                  _UxGT("Ch.: Ulozit UBL")
+#define MSG_UBL_RESTORE_ERROR               _UxGT("Ch.: Obnovit UBL")
 #define MSG_UBL_Z_OFFSET_STOPPED            _UxGT("Konec Z-Offsetu")
 #define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("UBL Postupne")
 
-#define MSG_LED_CONTROL                     _UxGT("LED Nastaveni")
+#define MSG_LED_CONTROL                     _UxGT("Nastaveni LED")
 #define MSG_LEDS                            _UxGT("Svetla")
 #define MSG_LED_PRESETS                     _UxGT("Svetla Predvolby")
 #define MSG_SET_LEDS_RED                    _UxGT("Cervena")
@@ -206,6 +211,7 @@
   #define MSG_VC_JERK                       _UxGT("Vz-jerk")
 #endif
 #define MSG_VE_JERK                         _UxGT("Ve-jerk")
+#define MSG_JUNCTION_DEVIATION              _UxGT("Odchylka spoje")
 #define MSG_VELOCITY                        _UxGT("Rychlost")
 #define MSG_VMAX                            _UxGT("Vmax ")
 #define MSG_VMIN                            _UxGT("Vmin")
@@ -250,11 +256,13 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pozastavit tisk")
 #define MSG_RESUME_PRINT                    _UxGT("Obnovit tisk")
 #define MSG_STOP_PRINT                      _UxGT("Zastavit tisk")
+#define MSG_POWER_LOSS_RECOVERY             _UxGT("Obnova vypadku")
 #define MSG_CARD_MENU                       _UxGT("Tisknout z SD")
 #define MSG_NO_CARD                         _UxGT("Zadna SD karta")
 #define MSG_DWELL                           _UxGT("Uspano...")
 #define MSG_USERWAIT                        _UxGT("Cekani na uziv...")
 #define MSG_PRINT_PAUSED                    _UxGT("Tisk pozastaven")
+#define MSG_PRINTING                        _UxGT("Tisknu...")
 #define MSG_PRINT_ABORTED                   _UxGT("Tisk zrusen")
 #define MSG_NO_MOVE                         _UxGT("Zadny pohyb.")
 #define MSG_KILLED                          _UxGT("PRERUSENO. ")
@@ -290,8 +298,10 @@
 #define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
 #define MSG_ENDSTOP_ABORT                   _UxGT("Endstop abort")
 #define MSG_HEATING_FAILED_LCD              _UxGT("Chyba zahrivani")
+#define MSG_HEATING_FAILED_LCD_BED          _UxGT("Chyba zahr.podl.")
 #define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEPLOTA")
-#define MSG_THERMAL_RUNAWAY                 _UxGT("TEPLOTNI SKOK")
+#define MSG_THERMAL_RUNAWAY                 _UxGT("TEPLOTNI UNIK")
+#define MSG_THERMAL_RUNAWAY_BED             _UxGT("TEPL. UNIK PODL.")
 #define MSG_ERR_MAXTEMP                     _UxGT("VYSOKA TEPLOTA")
 #define MSG_ERR_MINTEMP                     _UxGT("NIZKA TEPLOTA")
 #define MSG_ERR_MAXTEMP_BED                 _UxGT("VYS. TEPL. PODL.")
@@ -303,7 +313,17 @@
 #define MSG_SHORT_HOUR                      _UxGT("h")
 #define MSG_SHORT_MINUTE                    _UxGT("m")
 #define MSG_HEATING                         _UxGT("Zahrivani...")
-#define MSG_BED_HEATING                     _UxGT("Zahrivani podl...")
+#define MSG_COOLING                         _UxGT("Chlazeni...")
+#if LCD_WIDTH >= 20
+  #define MSG_BED_HEATING                   _UxGT("Zahrivani podlozky")
+#else
+  #define MSG_BED_HEATING                   _UxGT("Zahrivani podl.")
+#endif
+#if LCD_WIDTH >= 20
+  #define MSG_BED_COOLING                   _UxGT("Chlazeni podlozky")
+#else
+  #define MSG_BED_COOLING                   _UxGT("Chlazeni podl.")
+#endif
 #define MSG_DELTA_CALIBRATE                 _UxGT("Delta Kalibrace")
 #define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibrovat X")
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibrovat Y")
@@ -312,6 +332,7 @@
 #define MSG_DELTA_SETTINGS                  _UxGT("Delta nastaveni")
 #define MSG_DELTA_AUTO_CALIBRATE            _UxGT("Autokalibrace")
 #define MSG_DELTA_HEIGHT_CALIBRATE          _UxGT("Nast.vysku delty")
+#define MSG_DELTA_Z_OFFSET_CALIBRATE        _UxGT("Nast. Z-ofset")
 #define MSG_DELTA_DIAG_ROD                  _UxGT("Diag rameno")
 #define MSG_DELTA_HEIGHT                    _UxGT("Vyska")
 #define MSG_DELTA_RADIUS                    _UxGT("Polomer")
@@ -364,36 +385,36 @@
 
 #if LCD_HEIGHT >= 4
   // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("na zahajeni")
-  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("vymeny filamentu")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("na vysunuti")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vlozte filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("a stisknete")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("tlacitko...")
-  #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Kliknete pro")
-  #define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("nahrati trysky")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("na nahrati tr.")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("na zavedeni")
-  #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Vyckejte na")
-  #define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("vytlaceni")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Cekejte prosim")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("na pokracovani")
-  #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("tisku")
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Cekejte prosim")
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("na zahajeni")
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("vymeny filamentu")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Cekejte prosim")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("na vysunuti")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_3      _UxGT("filamentu")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Vlozte filament")
+  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("a stisknete")
+  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("tlacitko...")
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Kliknete pro")
+  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("nahrati trysky")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Cekejte prosim")
+  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("na nahrati tr.")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Cekejte prosim")
+  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("na zavedeni")
+  #define MSG_FILAMENT_CHANGE_LOAD_3        _UxGT("filamentu")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Vyckejte na")
+  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("vytlaceni")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Cekejte prosim")
+  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("na pokracovani")
+  #define MSG_FILAMENT_CHANGE_RESUME_3      _UxGT("tisku")
 #else // LCD_HEIGHT < 4
   // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Cekejte...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Vysouvani...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vlozte, kliknete")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Nahrivani...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Zavadeni...")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Vytlacovani...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Pokracovani...")
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Cekejte...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Vysouvani...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Vlozte, kliknete")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Nahrivani...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Zavadeni...")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Vytlacovani...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Pokracovani...")
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_CZ_H

Marlin/language_cz_utf8.h

@@ -49,7 +49,11 @@
 #define MSG_AUTOSTART                       _UxGT("Autostart")
 #define MSG_DISABLE_STEPPERS                _UxGT("Uvolnit motory")
 #define MSG_DEBUG_MENU                      _UxGT("Nabídka ladění")
-#define MSG_PROGRESS_BAR_TEST               _UxGT("Test uk. průběhu")
+#if LCD_WIDTH >= 20
+  #define MSG_PROGRESS_BAR_TEST             _UxGT("Test ukaz. průběhu")
+#else
+  #define MSG_PROGRESS_BAR_TEST             _UxGT("Test uk. průběhu")
+#endif
 #define MSG_AUTO_HOME                       _UxGT("Domovská pozice")
 #define MSG_AUTO_HOME_X                     _UxGT("Domů osa X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Domů osa Y")
@@ -108,8 +112,8 @@
 #define MSG_UBL_DONE_EDITING_MESH           _UxGT("Konec úprav sítě")
 #define MSG_UBL_BUILD_CUSTOM_MESH           _UxGT("Vlastní síť")
 #define MSG_UBL_BUILD_MESH_MENU             _UxGT("Vytvořit síť")
-#define MSG_UBL_BUILD_PLA_MESH              _UxGT("Síť bodu PLA")
-#define MSG_UBL_BUILD_ABS_MESH              _UxGT("Síť bodu ABS")
+#define MSG_UBL_BUILD_PLA_MESH              _UxGT("Síť bodů PLA")
+#define MSG_UBL_BUILD_ABS_MESH              _UxGT("Síť bodů ABS")
 #define MSG_UBL_BUILD_COLD_MESH             _UxGT("Studená síť bodů")
 #define MSG_UBL_MESH_HEIGHT_ADJUST          _UxGT("Upravit výšku sítě")
 #define MSG_UBL_MESH_HEIGHT_AMOUNT          _UxGT("Výška")
@@ -119,8 +123,8 @@
 #define MSG_UBL_VALIDATE_CUSTOM_MESH        _UxGT("Kontrola vlast. sítě")
 #define MSG_UBL_CONTINUE_MESH               _UxGT("Pokračovat v síťi")
 #define MSG_UBL_MESH_LEVELING               _UxGT("Síťové rovnání")
-#define MSG_UBL_3POINT_MESH_LEVELING        _UxGT("3-bodove rovnání")
-#define MSG_UBL_GRID_MESH_LEVELING          _UxGT("Mrizkove rovnání")
+#define MSG_UBL_3POINT_MESH_LEVELING        _UxGT("3-bodové rovnání")
+#define MSG_UBL_GRID_MESH_LEVELING          _UxGT("Mřížkové rovnání")
 #define MSG_UBL_MESH_LEVEL                  _UxGT("Srovnat podložku")
 #define MSG_UBL_SIDE_POINTS                 _UxGT("Postranní body")
 #define MSG_UBL_MAP_TYPE                    _UxGT("Typ sítě bodu")
@@ -145,12 +149,12 @@
 #define MSG_MESH_LOADED                     _UxGT("Síť %i načtena")
 #define MSG_MESH_SAVED                      _UxGT("Síť %i uložena")
 #define MSG_NO_STORAGE                      _UxGT("Nedostatek místa")
-#define MSG_UBL_SAVE_ERROR                  _UxGT("Err: Uložit UBL")
-#define MSG_UBL_RESTORE_ERROR               _UxGT("Err: Obnovit UBL")
+#define MSG_UBL_SAVE_ERROR                  _UxGT("Ch.: Uložit UBL")
+#define MSG_UBL_RESTORE_ERROR               _UxGT("Ch.: Obnovit UBL")
 #define MSG_UBL_Z_OFFSET_STOPPED            _UxGT("Konec Z-Offsetu")
 #define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("UBL Postupně")
 
-#define MSG_LED_CONTROL                     _UxGT("LED Nastavení")
+#define MSG_LED_CONTROL                     _UxGT("Nastavení LED")
 #define MSG_LEDS                            _UxGT("Světla")
 #define MSG_LED_PRESETS                     _UxGT("Světla Předvolby")
 #define MSG_SET_LEDS_RED                    _UxGT("Červená")
@@ -170,7 +174,7 @@
 #define MSG_LED_BRIGHTNESS                  _UxGT("Jas")
 
 #define MSG_USER_MENU                       _UxGT("Vlastní příkazy")
-#define MSG_MOVING                          _UxGT("Posouvani...")
+#define MSG_MOVING                          _UxGT("Posouvání...")
 #define MSG_FREE_XY                         _UxGT("Uvolnit XY")
 #define MSG_MOVE_X                          _UxGT("Posunout X")
 #define MSG_MOVE_Y                          _UxGT("Posunout Y")
@@ -210,6 +214,7 @@
   #define MSG_VC_JERK                       _UxGT("Vz-jerk")
 #endif
 #define MSG_VE_JERK                         _UxGT("Ve-jerk")
+#define MSG_JUNCTION_DEVIATION              _UxGT("Odchylka spoje")
 #define MSG_VELOCITY                        _UxGT("Rychlost")
 #define MSG_VMAX                            _UxGT("Vmax ")
 #define MSG_VMIN                            _UxGT("Vmin")
@@ -254,7 +259,7 @@
 #define MSG_PAUSE_PRINT                     _UxGT("Pozastavit tisk")
 #define MSG_RESUME_PRINT                    _UxGT("Obnovit tisk")
 #define MSG_STOP_PRINT                      _UxGT("Zastavit tisk")
-#define MSG_POWER_LOSS_RECOVERY             _UxGT("Obnova vypadku")
+#define MSG_POWER_LOSS_RECOVERY             _UxGT("Obnova výpadku")
 #define MSG_CARD_MENU                       _UxGT("Tisknout z SD")
 #define MSG_NO_CARD                         _UxGT("Žádná SD karta")
 #define MSG_DWELL                           _UxGT("Uspáno...")
@@ -296,10 +301,10 @@
 #define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
 #define MSG_ENDSTOP_ABORT                   _UxGT("Endstop abort")
 #define MSG_HEATING_FAILED_LCD              _UxGT("Chyba zahřívání")
-#define MSG_HEATING_FAILED_LCD_BED          _UxGT("Chyba zahř. podl.")
+#define MSG_HEATING_FAILED_LCD_BED          _UxGT("Chyba zahř.podl.")
 #define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEPLOTA")
-#define MSG_THERMAL_RUNAWAY                 _UxGT("TEPLOTNÍ SKOK")
-#define MSG_THERMAL_RUNAWAY_BED             _UxGT("PODL. TEPL. SKOK")
+#define MSG_THERMAL_RUNAWAY                 _UxGT("TEPLOTNÍ ÚNIK")
+#define MSG_THERMAL_RUNAWAY_BED             _UxGT("TEPL. ÚNIK PODL.")
 #define MSG_ERR_MAXTEMP                     _UxGT("VYSOKÁ TEPLOTA")
 #define MSG_ERR_MINTEMP                     _UxGT("NÍZKA TEPLOTA")
 #define MSG_ERR_MAXTEMP_BED                 _UxGT("VYS. TEPL. PODL.")
@@ -311,9 +316,17 @@
 #define MSG_SHORT_HOUR                      _UxGT("h")
 #define MSG_SHORT_MINUTE                    _UxGT("m")
 #define MSG_HEATING                         _UxGT("Zahřívání...")
-#define MSG_COOLING                         _UxGT("Chlazení")
-#define MSG_BED_HEATING                     _UxGT("Zahřívání podl...")
-#define MSG_BED_COOLING                     _UxGT("Chlazení podl...")
+#define MSG_COOLING                         _UxGT("Chlazení...")
+#if LCD_WIDTH >= 20
+  #define MSG_BED_HEATING                   _UxGT("Zahřívání podložky")
+#else
+  #define MSG_BED_HEATING                   _UxGT("Zahřívání podl.")
+#endif
+#if LCD_WIDTH >= 20
+  #define MSG_BED_COOLING                   _UxGT("Chlazení podložky")
+#else
+  #define MSG_BED_COOLING                   _UxGT("Chlazení podl.")
+#endif
 #define MSG_DELTA_CALIBRATE                 _UxGT("Delta Kalibrace")
 #define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibrovat X")
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibrovat Y")
@@ -375,36 +388,36 @@
 
 #if LCD_HEIGHT >= 4
   // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("na zahájení")
-  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("výměny filamentu")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("na vysunuti")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vložte filament")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("a stiskněte")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("tlačítko...")
-  #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Klikněte pro")
-  #define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("nahřátí trysky")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("na nahřátí tr.")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("na zavedení")
-  #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("filamentu")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Vyčkejte na")
-  #define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("vytlačení")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Čekejte prosím")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("na pokračování")
-  #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("tisku")
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Čekejte prosím")
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("na zahájení")
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("výměny filamentu")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Čekejte prosím")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("na vysunuti")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_3      _UxGT("filamentu")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Vložte filament")
+  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("a stiskněte")
+  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("tlačítko...")
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Klikněte pro")
+  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("nahřátí trysky")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Čekejte prosím")
+  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("na nahřátí tr.")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Čekejte prosím")
+  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("na zavedení")
+  #define MSG_FILAMENT_CHANGE_LOAD_3        _UxGT("filamentu")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Vyčkejte na")
+  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("vytlačení")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Čekejte prosím")
+  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("na pokračování")
+  #define MSG_FILAMENT_CHANGE_RESUME_3      _UxGT("tisku")
 #else // LCD_HEIGHT < 4
   // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Čekejte...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Vysouvání...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Vložte, klikněte")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Nahřívání...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Zavádění...")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Vytlačování...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Pokračování...")
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Čekejte...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Vysouvání...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Vložte, klikněte")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Nahřívání...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Zavádění...")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Vytlačování...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Pokračování...")
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_CZ_UTF_H

Marlin/language_de.h

@@ -41,33 +41,34 @@
 #define MSG_SD_INSERTED                     _UxGT("SD-Karte erkannt")
 #define MSG_SD_REMOVED                      _UxGT("SD-Karte entfernt")
 #define MSG_LCD_ENDSTOPS                    _UxGT("Endstopp") // Max length 8 characters
+#define MSG_LCD_SOFT_ENDSTOPS               _UxGT("Soft-Endstopp")
 #define MSG_MAIN                            _UxGT("Hauptmenü")
 #define MSG_AUTOSTART                       _UxGT("Autostart")
 #define MSG_DISABLE_STEPPERS                _UxGT("Motoren deaktivieren") // M84
-#define MSG_DEBUG_MENU                      _UxGT("Debug Menü")
-#define MSG_PROGRESS_BAR_TEST               _UxGT("Fortschrittsb. Test")
-#define MSG_AUTO_HOME                       _UxGT("Home") // G28
+#define MSG_DEBUG_MENU                      _UxGT("Debug-Menü")
+#define MSG_PROGRESS_BAR_TEST               _UxGT("Statusbalken-Test")
+#define MSG_AUTO_HOME                       _UxGT("Home XYZ") // G28
 #define MSG_AUTO_HOME_X                     _UxGT("Home X")
 #define MSG_AUTO_HOME_Y                     _UxGT("Home Y")
 #define MSG_AUTO_HOME_Z                     _UxGT("Home Z")
 #define MSG_TMC_Z_CALIBRATION               _UxGT("Kalibriere Z")
 #define MSG_LEVEL_BED_HOMING                _UxGT("Home XYZ")
-#define MSG_LEVEL_BED_WAITING               _UxGT("Klick für Start")
+#define MSG_LEVEL_BED_WAITING               _UxGT("Klick zum Starten")
 #define MSG_LEVEL_BED_NEXT_POINT            _UxGT("Nächste Koordinate")
-#define MSG_LEVEL_BED_DONE                  _UxGT("Fertig")
+#define MSG_LEVEL_BED_DONE                  _UxGT("Nivellieren fertig!")
 #define MSG_Z_FADE_HEIGHT                   _UxGT("Ausblendhöhe")
 #define MSG_SET_HOME_OFFSETS                _UxGT("Setze Homeversatz")
 #define MSG_HOME_OFFSETS_APPLIED            _UxGT("Homeversatz aktiv")
-#define MSG_SET_ORIGIN                      _UxGT("Setze Nullpunkt") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
+#define MSG_SET_ORIGIN                      _UxGT("Setze Nullpunkte") //"G92 X0 Y0 Z0" commented out in ultralcd.cpp
 #define MSG_PREHEAT_1                       _UxGT("Vorwärmen PLA")
 #define MSG_PREHEAT_1_N                     _UxGT("Vorwärmen PLA ")
-#define MSG_PREHEAT_1_ALL                   _UxGT("Vorw. PLA Alle")
+#define MSG_PREHEAT_1_ALL                   _UxGT("Vorw. PLA Alles")
 #define MSG_PREHEAT_1_END                   _UxGT("Vorw. PLA Extr.")
 #define MSG_PREHEAT_1_BEDONLY               _UxGT("Vorw. PLA Bett")
 #define MSG_PREHEAT_1_SETTINGS              _UxGT("Vorw. PLA Einst.")
 #define MSG_PREHEAT_2                       _UxGT("Vorwärmen ABS")
 #define MSG_PREHEAT_2_N                     _UxGT("Vorwärmen ABS ")
-#define MSG_PREHEAT_2_ALL                   _UxGT("Vorw. ABS Alle")
+#define MSG_PREHEAT_2_ALL                   _UxGT("Vorw. ABS Alles")
 #define MSG_PREHEAT_2_END                   _UxGT("Vorw. ABS Extr.")
 #define MSG_PREHEAT_2_BEDONLY               _UxGT("Vorw. ABS Bett")
 #define MSG_PREHEAT_2_SETTINGS              _UxGT("Vorw. ABS Einst.")
@@ -75,20 +76,102 @@
 #define MSG_SWITCH_PS_ON                    _UxGT("Netzteil ein")
 #define MSG_SWITCH_PS_OFF                   _UxGT("Netzteil aus")
 #define MSG_EXTRUDE                         _UxGT("Extrudieren")
-#define MSG_RETRACT                         _UxGT("Retract")
-#define MSG_MOVE_AXIS                       _UxGT("Bewegen")
-#define MSG_BED_LEVELING                    _UxGT("Bett Nivellierung")
+#define MSG_RETRACT                         _UxGT("Rückzug")
+#define MSG_MOVE_AXIS                       _UxGT("Achse Bewegen")
+#define MSG_BED_LEVELING                    _UxGT("Bett-Nivellierung")
 #define MSG_LEVEL_BED                       _UxGT("Bett nivellieren")
 #define MSG_LEVEL_CORNERS                   _UxGT("Ecken nivellieren")
 #define MSG_NEXT_CORNER                     _UxGT("Nächste Ecke")
 #define MSG_EDITING_STOPPED                 _UxGT("Netzbearb. angeh.")
-#define MSG_USER_MENU                       _UxGT("Benutzer Menü")
+#define MSG_USER_MENU                       _UxGT("Benutzer-Menü")
+#define MSG_UBL_DOING_G29                   _UxGT("G29 ausführen")
+#define MSG_UBL_UNHOMED                     _UxGT("Home XYZ zuerst")
+#define MSG_UBL_TOOLS                       _UxGT("UBL-Werkzeuge")
+#define MSG_UBL_LEVEL_BED                   _UxGT("Unified Bed Leveling")
+#define MSG_UBL_MANUAL_MESH                 _UxGT("Netz manuell erst.")
+#define MSG_UBL_BC_INSERT                   _UxGT("Unterlegen & messen")
+#define MSG_UBL_BC_INSERT2                  _UxGT("Messen")
+#define MSG_UBL_BC_REMOVE                   _UxGT("Entfernen & messen")
+#define MSG_UBL_MOVING_TO_NEXT              _UxGT("Nächster Punkt...")
+#define MSG_UBL_ACTIVATE_MESH               _UxGT("UBL aktivieren")
+#define MSG_UBL_DEACTIVATE_MESH             _UxGT("UBL deaktivieren")
+#define MSG_UBL_SET_BED_TEMP                _UxGT("Betttemperatur")
+#define MSG_UBL_CUSTOM_BED_TEMP             MSG_UBL_SET_BED_TEMP
+#define MSG_UBL_SET_HOTEND_TEMP             _UxGT("Hotend-Temp.")
+#define MSG_UBL_CUSTOM_HOTEND_TEMP          MSG_UBL_SET_HOTEND_TEMP
+#define MSG_UBL_MESH_EDIT                   _UxGT("Netz bearbeiten")
+#define MSG_UBL_EDIT_CUSTOM_MESH            _UxGT("Eigenes Netz bearb.")
+#define MSG_UBL_FINE_TUNE_MESH              _UxGT("Feineinstellung...")
+#define MSG_UBL_DONE_EDITING_MESH           _UxGT("Bearbeitung beendet")
+#define MSG_UBL_BUILD_CUSTOM_MESH           _UxGT("Eigenes Netz erst.")
+#define MSG_UBL_BUILD_MESH_MENU             _UxGT("Netz erstellen")
+#define MSG_UBL_BUILD_PLA_MESH              _UxGT("Netz erstellen PLA")
+#define MSG_UBL_BUILD_ABS_MESH              _UxGT("Netz erstellen ABS")
+#define MSG_UBL_BUILD_COLD_MESH             _UxGT("Netz erstellen kalt")
+#define MSG_UBL_MESH_HEIGHT_ADJUST          _UxGT("Netzhöhe einst.")
+#define MSG_UBL_MESH_HEIGHT_AMOUNT          _UxGT("Höhe")
+#define MSG_UBL_VALIDATE_MESH_MENU          _UxGT("Netz validieren")
+#define MSG_UBL_VALIDATE_PLA_MESH           _UxGT("Netz validieren PLA")
+#define MSG_UBL_VALIDATE_ABS_MESH           _UxGT("Netz validieren ABS")
+#define MSG_UBL_VALIDATE_CUSTOM_MESH        _UxGT("Eig. Netz validieren")
+#define MSG_UBL_CONTINUE_MESH               _UxGT("Netzerst. forts.")
+#define MSG_UBL_MESH_LEVELING               _UxGT("Netz-Nivellierung")
+#define MSG_UBL_3POINT_MESH_LEVELING        _UxGT("3-Punkt-Nivell.")
+#define MSG_UBL_GRID_MESH_LEVELING          _UxGT("Gitternetz-Nivell.")
+#define MSG_UBL_MESH_LEVEL                  _UxGT("Netz nivellieren")
+#define MSG_UBL_SIDE_POINTS                 _UxGT("Eckpunkte")
+#define MSG_UBL_MAP_TYPE                    _UxGT("Kartentyp")
+#define MSG_UBL_OUTPUT_MAP                  _UxGT("Karte ausgeben")
+#define MSG_UBL_OUTPUT_MAP_HOST             _UxGT("Ausgabe für Host")
+#define MSG_UBL_OUTPUT_MAP_CSV              _UxGT("Ausgabe für CSV")
+#define MSG_UBL_OUTPUT_MAP_BACKUP           _UxGT("Externe Sicherung")
+#define MSG_UBL_INFO_UBL                    _UxGT("UBL-Info ausgeben")
+#define MSG_UBL_EDIT_MESH_MENU             _UxGT("Netz bearbeiten")
+#define MSG_UBL_FILLIN_AMOUNT               _UxGT("Menge an Füllung")
+#define MSG_UBL_MANUAL_FILLIN               _UxGT("Manuelles Füllung")
+#define MSG_UBL_SMART_FILLIN                _UxGT("Cleveres Füllen")
+#define MSG_UBL_FILLIN_MESH                 _UxGT("Netz Füllen")
+#define MSG_UBL_INVALIDATE_ALL              _UxGT("Alles annullieren")
+#define MSG_UBL_INVALIDATE_CLOSEST          _UxGT("Nächstlieg. ann.")
+#define MSG_UBL_FINE_TUNE_ALL               _UxGT("Feineinst. Alles")
+#define MSG_UBL_FINE_TUNE_CLOSEST           _UxGT("Feineinst. Nächstl.")
+#define MSG_UBL_STORAGE_MESH_MENU           _UxGT("Netz-Speicherplatz")
+#define MSG_UBL_STORAGE_SLOT                _UxGT("Speicherort")
+#define MSG_UBL_LOAD_MESH                   _UxGT("Bettnetz laden")
+#define MSG_UBL_SAVE_MESH                   _UxGT("Bettnetz speichern")
+#define MSG_MESH_LOADED                     _UxGT("Netz %i geladen")
+#define MSG_MESH_SAVED                      _UxGT("Netz %i gespeichert")
+#define MSG_NO_STORAGE                      _UxGT("Kein Speicher")
+#define MSG_UBL_SAVE_ERROR                  _UxGT("ERR:UBL speichern")
+#define MSG_UBL_RESTORE_ERROR               _UxGT("ERR:UBL wiederherst.")
+#define MSG_UBL_Z_OFFSET_STOPPED            _UxGT("Z-Versatz angehalten")
+#define MSG_UBL_STEP_BY_STEP_MENU           _UxGT("Schrittweises UBL")
+
+#define MSG_LED_CONTROL                     _UxGT("LED-Steuerung")
+#define MSG_LEDS                            _UxGT("Licht")
+#define MSG_LED_PRESETS                     _UxGT("Licht-Einstellungen")
+#define MSG_SET_LEDS_RED                    _UxGT("Rot")
+#define MSG_SET_LEDS_ORANGE                 _UxGT("Orange")
+#define MSG_SET_LEDS_YELLOW                 _UxGT("Gelb")
+#define MSG_SET_LEDS_GREEN                  _UxGT("Grün")
+#define MSG_SET_LEDS_BLUE                   _UxGT("Blau")
+#define MSG_SET_LEDS_INDIGO                 _UxGT("Indigo")
+#define MSG_SET_LEDS_VIOLET                 _UxGT("Violett")
+#define MSG_SET_LEDS_WHITE                  _UxGT("Weiß")
+#define MSG_SET_LEDS_DEFAULT                _UxGT("Standard")
+#define MSG_CUSTOM_LEDS                     _UxGT("Benutzerdef.")
+#define MSG_INTENSITY_R                     _UxGT("Intensität Rot")
+#define MSG_INTENSITY_G                     _UxGT("Intensität Grün")
+#define MSG_INTENSITY_B                     _UxGT("Intensität Blau")
+#define MSG_INTENSITY_W                     _UxGT("Intensität Weiß")
+#define MSG_LED_BRIGHTNESS                  _UxGT("Helligkeit")
+
 #define MSG_MOVING                          _UxGT("In Bewegung...")
 #define MSG_FREE_XY                         _UxGT("Abstand XY")
-#define MSG_MOVE_X                          _UxGT("X")
-#define MSG_MOVE_Y                          _UxGT("Y")
-#define MSG_MOVE_Z                          _UxGT("Z")
-#define MSG_MOVE_E                          _UxGT("Extruder ")
+#define MSG_MOVE_X                          _UxGT("Bewege X")
+#define MSG_MOVE_Y                          _UxGT("Bewege Y")
+#define MSG_MOVE_Z                          _UxGT("Bewege Z")
+#define MSG_MOVE_E                          _UxGT("Bewege Extruder")
 #define MSG_MOVE_01MM                       _UxGT(" 0,1 mm")
 #define MSG_MOVE_1MM                        _UxGT(" 1,0 mm")
 #define MSG_MOVE_10MM                       _UxGT("10,0 mm")
@@ -97,13 +180,13 @@
 #define MSG_NOZZLE                          _UxGT("Düse")
 #define MSG_BED                             _UxGT("Bett")
 #define MSG_FAN_SPEED                       _UxGT("Lüfter")
-#define MSG_EXTRA_FAN_SPEED                 _UxGT("Extra Lüfter")
+#define MSG_EXTRA_FAN_SPEED                 _UxGT("Geschw. Extralüfter")
 #define MSG_FLOW                            _UxGT("Flussrate")
 #define MSG_CONTROL                         _UxGT("Einstellungen")
 #define MSG_MIN                             LCD_STR_THERMOMETER _UxGT(" min")
 #define MSG_MAX                             LCD_STR_THERMOMETER _UxGT(" max")
 #define MSG_FACTOR                          LCD_STR_THERMOMETER _UxGT(" Faktor")
-#define MSG_AUTOTEMP                        _UxGT("AutoTemp")
+#define MSG_AUTOTEMP                        _UxGT("Auto Temperatur")
 #define MSG_ON                              _UxGT("Ein")
 #define MSG_OFF                             _UxGT("Aus")
 #define MSG_PID_P                           _UxGT("PID P")
@@ -111,7 +194,7 @@
 #define MSG_PID_D                           _UxGT("PID D")
 #define MSG_PID_C                           _UxGT("PID C")
 #define MSG_SELECT                          _UxGT("Auswählen")
-#define MSG_ACC                             _UxGT("A")
+#define MSG_ACC                             _UxGT("Beschleunigung")
 #define MSG_JERK                            _UxGT("Jerk")
 #if IS_KINEMATIC
   #define MSG_VA_JERK                       _UxGT("V A Jerk")
@@ -123,13 +206,14 @@
   #define MSG_VC_JERK                       _UxGT("V Z Jerk")
 #endif
 #define MSG_VE_JERK                         _UxGT("V E Jerk")
+#define MSG_JUNCTION_DEVIATION              _UxGT("Junction Dev")
 #define MSG_VELOCITY                        _UxGT("Geschwindigkeit")
-#define MSG_VMAX                            _UxGT("V max ") // space by purpose
+#define MSG_VMAX                            _UxGT("V max ") // space intentional
 #define MSG_VMIN                            _UxGT("V min")
 #define MSG_VTRAV_MIN                       _UxGT("V min Leerfahrt")
 #define MSG_ACCELERATION                    _UxGT("Beschleunigung")
-#define MSG_AMAX                            _UxGT("A max ") // space by purpose
-#define MSG_A_RETRACT                       _UxGT("A Retract")
+#define MSG_AMAX                            _UxGT("A max ") // space intentional
+#define MSG_A_RETRACT                       _UxGT("A Rückzug")
 #define MSG_A_TRAVEL                        _UxGT("A Leerfahrt")
 #define MSG_STEPS_PER_MM                    _UxGT("Steps/mm")
 #if IS_KINEMATIC
@@ -151,11 +235,11 @@
 #define MSG_MOTION                          _UxGT("Bewegung")
 #define MSG_FILAMENT                        _UxGT("Filament")
 #define MSG_VOLUMETRIC_ENABLED              _UxGT("E in mm³")
-#define MSG_FILAMENT_DIAM                   _UxGT("D Fil.")
+#define MSG_FILAMENT_DIAM                   _UxGT("Durchm. Filament")
 #define MSG_FILAMENT_UNLOAD                 _UxGT("Entladen mm")
 #define MSG_FILAMENT_LOAD                   _UxGT("Laden mm")
-#define MSG_ADVANCE_K                       _UxGT("Advance Faktor")
-#define MSG_CONTRAST                        _UxGT("LCD Kontrast")
+#define MSG_ADVANCE_K                       _UxGT("Vorschubfaktor")
+#define MSG_CONTRAST                        _UxGT("LCD-Kontrast")
 #define MSG_STORE_EEPROM                    _UxGT("Konfig. speichern")
 #define MSG_LOAD_EEPROM                     _UxGT("Konfig. laden")
 #define MSG_RESTORE_FAILSAFE                _UxGT("Standardwerte laden")
@@ -164,49 +248,52 @@
 #define MSG_WATCH                           _UxGT("Info")
 #define MSG_PREPARE                         _UxGT("Vorbereitung")
 #define MSG_TUNE                            _UxGT("Justierung")
-#define MSG_PAUSE_PRINT                     _UxGT("SD-Druck Pause")
-#define MSG_RESUME_PRINT                    _UxGT("SD-Druck Fortsetzung")
-#define MSG_STOP_PRINT                      _UxGT("SD-Druck Abbruch")
-#define MSG_CARD_MENU                       _UxGT("SD-Karte")
+#define MSG_PAUSE_PRINT                     _UxGT("SD-Druck pausieren")
+#define MSG_RESUME_PRINT                    _UxGT("SD-Druck fortsetzen")
+#define MSG_STOP_PRINT                      _UxGT("SD-Druck abbrechen")
+#define MSG_POWER_LOSS_RECOVERY             _UxGT("Wiederh. n. Stroma.")
+#define MSG_CARD_MENU                       _UxGT("Druck v. SD-Karte")
 #define MSG_NO_CARD                         _UxGT("Keine SD-Karte")
 #define MSG_DWELL                           _UxGT("Warten...")
-#define MSG_USERWAIT                        _UxGT("Warte auf Nutzer")
-#define MSG_PRINT_PAUSED                    _UxGT("Druck pausiert")
+#define MSG_USERWAIT                        _UxGT("Klick zum Fortsetzen")
+#define MSG_PRINT_PAUSED                    _UxGT("Druck pausiert...")
+#define MSG_PRINTING                        _UxGT("Druckt...")
 #define MSG_PRINT_ABORTED                   _UxGT("Druck abgebrochen")
-#define MSG_NO_MOVE                         _UxGT("Motoren eingeschaltet")
+#define MSG_NO_MOVE                         _UxGT("Motoren angeschaltet")
 #define MSG_KILLED                          _UxGT("ABGEBROCHEN")
 #define MSG_STOPPED                         _UxGT("ANGEHALTEN")
-#define MSG_CONTROL_RETRACT                 _UxGT("Retract mm")
-#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Wechs. Retract mm")
-#define MSG_CONTROL_RETRACTF                _UxGT("Retract  V")
-#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Z-Hop mm")
+#define MSG_CONTROL_RETRACT                 _UxGT("Rückzug mm")
+#define MSG_CONTROL_RETRACT_SWAP            _UxGT("Wechs. Rückzug mm")
+#define MSG_CONTROL_RETRACTF                _UxGT("Rückzug  V")
+#define MSG_CONTROL_RETRACT_ZLIFT           _UxGT("Z-Sprung mm")
 #define MSG_CONTROL_RETRACT_RECOVER         _UxGT("UnRet mm")
 #define MSG_CONTROL_RETRACT_RECOVER_SWAP    _UxGT("Wechs. UnRet mm")
 #define MSG_CONTROL_RETRACT_RECOVERF        _UxGT("UnRet  V")
 #define MSG_CONTROL_RETRACT_RECOVER_SWAPF   _UxGT("S UnRet V")
-#define MSG_AUTORETRACT                     _UxGT("Autom. Retract")
+#define MSG_AUTORETRACT                     _UxGT("Autom. Rückzug")
 #define MSG_FILAMENTCHANGE                  _UxGT("Filament wechseln")
 #define MSG_FILAMENTLOAD                    _UxGT("Filament laden")
 #define MSG_FILAMENTUNLOAD                  _UxGT("Filament entladen")
 #define MSG_FILAMENTUNLOAD_ALL              _UxGT("Alles entladen")
-#define MSG_INIT_SDCARD                     _UxGT("SD-Karte erkennen")  // Manually initialize the SD-card via user interface
+#define MSG_INIT_SDCARD                     _UxGT("SD-Karte initialisi.")  // Manually initialize the SD-card via user interface
 #define MSG_CNG_SDCARD                      _UxGT("SD-Karte getauscht") // SD-card changed by user. For machines with no autocarddetect. Both send "M21"
-#define MSG_ZPROBE_OUT                      _UxGT("Sensor ausserhalb")
-#define MSG_SKEW_FACTOR                     _UxGT("Skew Faktor")
+#define MSG_ZPROBE_OUT                      _UxGT("Z-Sonde außerhalb")
+#define MSG_SKEW_FACTOR                     _UxGT("Korrekturfaktor")
 #define MSG_BLTOUCH                         _UxGT("BLTouch")
-#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Test")
-#define MSG_BLTOUCH_RESET                   _UxGT("BLTouch Reset")
+#define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Selbsttest")
+#define MSG_BLTOUCH_RESET                   _UxGT("BLTouch zurücks.")
 #define MSG_BLTOUCH_DEPLOY                  _UxGT("BLTouch ausfahren")
 #define MSG_BLTOUCH_STOW                    _UxGT("BLTouch einfahren")
-#define MSG_HOME                            _UxGT("Vorher")  // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
+#define MSG_HOME                            _UxGT("Vorher") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
 #define MSG_FIRST                           _UxGT("homen")
-#define MSG_ZPROBE_ZOFFSET                  _UxGT("Z Versatz")
+#define MSG_ZPROBE_ZOFFSET                  _UxGT("Sondenversatz Z")
 #define MSG_BABYSTEP_X                      _UxGT("Babystep X")
 #define MSG_BABYSTEP_Y                      _UxGT("Babystep Y")
 #define MSG_BABYSTEP_Z                      _UxGT("Babystep Z")
-#define MSG_ENDSTOP_ABORT                   _UxGT("Endstopp-Abbr.")
-#define MSG_HEATING_FAILED_LCD              _UxGT("HEIZEN FEHLGESCHLAGEN")
-#define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEMPERATURABWEICHUNG")
+#define MSG_ENDSTOP_ABORT                   _UxGT("Endstopp Abbr.")
+#define MSG_HEATING_FAILED_LCD              _UxGT("HEIZEN ERFOLGLOS")
+#define MSG_HEATING_FAILED_LCD_BED          _UxGT("Bett heizen fehlge.")
+#define MSG_ERR_REDUNDANT_TEMP              _UxGT("REDUND. TEMP-ABWEI.")
 #define MSG_THERMAL_RUNAWAY                 LCD_STR_THERMOMETER _UxGT(" NICHT ERREICHT")
 #define MSG_THERMAL_RUNAWAY_BED             _UxGT("BETT") MSG_THERMAL_RUNAWAY
 #define MSG_ERR_MAXTEMP                     LCD_STR_THERMOMETER _UxGT(" ÜBERSCHRITTEN")
@@ -215,12 +302,14 @@
 #define MSG_ERR_MINTEMP_BED                 _UxGT("BETT ") LCD_STR_THERMOMETER _UxGT(" UNTERSCHRITTEN")
 #define MSG_ERR_Z_HOMING                    MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
 #define MSG_HALTED                          _UxGT("DRUCKER STOPP")
-#define MSG_PLEASE_RESET                    _UxGT("Bitte Resetten")
+#define MSG_PLEASE_RESET                    _UxGT("Bitte neustarten")
 #define MSG_SHORT_DAY                       _UxGT("t") // One character only
 #define MSG_SHORT_HOUR                      _UxGT("h") // One character only
 #define MSG_SHORT_MINUTE                    _UxGT("m") // One character only
 #define MSG_HEATING                         _UxGT("Extr. heizt...")
+#define MSG_COOLING                         _UxGT("Extr. kühlt...")
 #define MSG_BED_HEATING                     _UxGT("Bett heizt...")
+#define MSG_BED_COOLING                     _UxGT("Bett kühlt...")
 #define MSG_DELTA_CALIBRATE                 _UxGT("Delta kalibrieren")
 #define MSG_DELTA_CALIBRATE_X               _UxGT("Kalibriere X")
 #define MSG_DELTA_CALIBRATE_Y               _UxGT("Kalibriere Y")
@@ -229,171 +318,94 @@
 #define MSG_DELTA_SETTINGS                  _UxGT("Delta Einst. anzeig.")
 #define MSG_DELTA_AUTO_CALIBRATE            _UxGT("Autom. Kalibrierung")
 #define MSG_DELTA_HEIGHT_CALIBRATE          _UxGT("Delta Höhe setzen")
+#define MSG_DELTA_Z_OFFSET_CALIBRATE        _UxGT("Sondenversatz Z")
 #define MSG_DELTA_DIAG_ROD                  _UxGT("Diag Rod")
 #define MSG_DELTA_HEIGHT                    _UxGT("Höhe")
 #define MSG_DELTA_RADIUS                    _UxGT("Radius")
 #define MSG_INFO_MENU                       _UxGT("Über den Drucker")
-#define MSG_INFO_PRINTER_MENU               _UxGT("Drucker Info")
-#define MSG_3POINT_LEVELING                 _UxGT("3-Punkt Nivellierung")
+#define MSG_INFO_PRINTER_MENU               _UxGT("Drucker-Info")
+#define MSG_3POINT_LEVELING                 _UxGT("3-Punkt-Nivellierung")
 #define MSG_LINEAR_LEVELING                 _UxGT("Lineare Nivellierung")
 #define MSG_BILINEAR_LEVELING               _UxGT("Bilineare Nivell.")
 #define MSG_UBL_LEVELING                    _UxGT("Unified Bed Leveling")
-#define MSG_MESH_LEVELING                   _UxGT("Netz Nivellierung")
-#define MSG_INFO_STATS_MENU                 _UxGT("Drucker Statistik")
-#define MSG_INFO_BOARD_MENU                 _UxGT("Board Info")
+#define MSG_MESH_LEVELING                   _UxGT("Netz-Nivellierung")
+#define MSG_INFO_STATS_MENU                 _UxGT("Drucker-Statistik")
+#define MSG_INFO_BOARD_MENU                 _UxGT("Board-Info")
 #define MSG_INFO_THERMISTOR_MENU            _UxGT("Thermistoren")
 #define MSG_INFO_EXTRUDERS                  _UxGT("Extruder")
-#define MSG_INFO_BAUDRATE                   _UxGT("Baud")
+#define MSG_INFO_BAUDRATE                   _UxGT("Baudrate")
 #define MSG_INFO_PROTOCOL                   _UxGT("Protokoll")
 #define MSG_CASE_LIGHT                      _UxGT("Beleuchtung")
 #define MSG_CASE_LIGHT_BRIGHTNESS           _UxGT("Helligkeit")
 
-#define MSG_UBL_DOING_G29                 _UxGT("G29 UBL läuft!")
-#define MSG_UBL_UNHOMED                   _UxGT("Erst XYZ homen")
-#define MSG_UBL_TOOLS                     _UxGT("UBL Werkzeuge")
-#define MSG_UBL_LEVEL_BED                 _UxGT("Unified Bed Leveling")
-#define MSG_UBL_MANUAL_MESH               _UxGT("Netz manuell erst.")
-#define MSG_UBL_BC_INSERT                 _UxGT("Unterlegen & messen")
-#define MSG_UBL_BC_INSERT2                _UxGT("Messen")
-#define MSG_UBL_BC_REMOVE                 _UxGT("Entfernen & messen")
-#define MSG_UBL_MOVING_TO_NEXT            _UxGT("Nächster Punkt...")
-#define MSG_UBL_ACTIVATE_MESH             _UxGT("UBL aktivieren")
-#define MSG_UBL_DEACTIVATE_MESH           _UxGT("UBL deaktivieren")
-#define MSG_UBL_SET_BED_TEMP              _UxGT("Bett Temp.")
-#define MSG_UBL_CUSTOM_BED_TEMP           MSG_UBL_SET_BED_TEMP
-#define MSG_UBL_SET_HOTEND_TEMP           _UxGT("Hotend Temp.")
-#define MSG_UBL_CUSTOM_HOTEND_TEMP        MSG_UBL_SET_HOTEND_TEMP
-#define MSG_UBL_MESH_EDIT                 _UxGT("Netz bearbeiten")
-#define MSG_UBL_EDIT_CUSTOM_MESH          _UxGT("Eigenes Netz bearb.")
-#define MSG_UBL_FINE_TUNE_MESH            _UxGT("Feineinstellung...")
-#define MSG_UBL_DONE_EDITING_MESH         _UxGT("Bearbeitung beendet")
-#define MSG_UBL_BUILD_CUSTOM_MESH         _UxGT("Eigenes Netz erst.")
-#define MSG_UBL_BUILD_MESH_MENU           _UxGT("Netz erstellen")
-#define MSG_UBL_BUILD_PLA_MESH            _UxGT("Netz erstellen PLA")
-#define MSG_UBL_BUILD_ABS_MESH            _UxGT("Netz erstellen ABS")
-#define MSG_UBL_BUILD_COLD_MESH           _UxGT("Netz erstellen kalt")
-#define MSG_UBL_MESH_HEIGHT_ADJUST        _UxGT("Netz Höhe einst.")
-#define MSG_UBL_MESH_HEIGHT_AMOUNT        _UxGT("Höhe")
-#define MSG_UBL_VALIDATE_MESH_MENU        _UxGT("Netz validieren")
-#define MSG_UBL_VALIDATE_PLA_MESH         _UxGT("Netz validieren PLA")
-#define MSG_UBL_VALIDATE_ABS_MESH         _UxGT("Netz validieren ABS")
-#define MSG_UBL_VALIDATE_CUSTOM_MESH      _UxGT("Eig. Netz validieren")
-#define MSG_UBL_CONTINUE_MESH             _UxGT("Netzerst. forts.")
-#define MSG_UBL_MESH_LEVELING             _UxGT("Netz Nivellierung")
-#define MSG_UBL_3POINT_MESH_LEVELING      _UxGT("3-Punkt Nivellierung")
-#define MSG_UBL_GRID_MESH_LEVELING        _UxGT("Gitternetz Nivell.")
-#define MSG_UBL_MESH_LEVEL                _UxGT("Netz nivellieren")
-#define MSG_UBL_SIDE_POINTS               _UxGT("Eckpunkte")
-#define MSG_UBL_MAP_TYPE                  _UxGT("Kartentyp")
-#define MSG_UBL_OUTPUT_MAP                _UxGT("Karte ausgeben")
-#define MSG_UBL_OUTPUT_MAP_HOST           _UxGT("Ausgabe für Host")
-#define MSG_UBL_OUTPUT_MAP_CSV            _UxGT("Ausgabe für CSV")
-#define MSG_UBL_OUTPUT_MAP_BACKUP         _UxGT("Externe Sicherung")
-#define MSG_UBL_INFO_UBL                  _UxGT("UBL Info ausgeben")
-#define MSG_UBL_EDIT_MESH_MENU            _UxGT("Netz bearbeiten")
-#define MSG_UBL_FILLIN_AMOUNT             _UxGT("Menge an Fill-in")
-#define MSG_UBL_MANUAL_FILLIN             _UxGT("Manuelles Fill-in")
-#define MSG_UBL_SMART_FILLIN              _UxGT("Kluges Fill-in")
-#define MSG_UBL_FILLIN_MESH               _UxGT("Fill-in Netz")
-#define MSG_UBL_INVALIDATE_ALL            _UxGT("Alles annullieren")
-#define MSG_UBL_INVALIDATE_CLOSEST        _UxGT("Nächstlieg. ann.")
-#define MSG_UBL_FINE_TUNE_ALL             _UxGT("Feineinstellung Alle")
-#define MSG_UBL_FINE_TUNE_CLOSEST         _UxGT("Feineinst. Nächstl.")
-#define MSG_UBL_STORAGE_MESH_MENU         _UxGT("Netz Speicherplatz")
-#define MSG_UBL_STORAGE_SLOT              _UxGT("Memory Slot")
-#define MSG_UBL_LOAD_MESH                 _UxGT("Bett Netz laden")
-#define MSG_UBL_SAVE_MESH                 _UxGT("Bett Netz speichern")
-#define MSG_MESH_LOADED                   _UxGT("Netz %i geladen")
-#define MSG_MESH_SAVED                    _UxGT("Netz %i gespeichert")
-#define MSG_NO_STORAGE                    _UxGT("Kein Speicher")
-#define MSG_UBL_SAVE_ERROR                _UxGT("ERR:UBL speichern")
-#define MSG_UBL_RESTORE_ERROR             _UxGT("ERR:UBL wiederherst.")
-#define MSG_UBL_Z_OFFSET_STOPPED          _UxGT("Z-Versatz angehalten")
-#define MSG_UBL_STEP_BY_STEP_MENU         _UxGT("Schrittweises UBL")
-
-#define MSG_LED_CONTROL                     _UxGT("LED Kontrolle")
-#define MSG_LEDS                            _UxGT("Licht")
-#define MSG_LED_PRESETS                     _UxGT("Licht Einstellungen")
-#define MSG_SET_LEDS_RED                    _UxGT("Rot")
-#define MSG_SET_LEDS_ORANGE                 _UxGT("Orange")
-#define MSG_SET_LEDS_YELLOW                 _UxGT("Gelb")
-#define MSG_SET_LEDS_GREEN                  _UxGT("Grün")
-#define MSG_SET_LEDS_BLUE                   _UxGT("Blau")
-#define MSG_SET_LEDS_INDIGO                 _UxGT("Indigo")
-#define MSG_SET_LEDS_VIOLET                 _UxGT("Violett")
-#define MSG_SET_LEDS_WHITE                  _UxGT("Weiß")
-#define MSG_SET_LEDS_DEFAULT                _UxGT("Standard")
-#define MSG_CUSTOM_LEDS                     _UxGT("Benutzerdef.")
-#define MSG_INTENSITY_R                     _UxGT("Intensität Rot")
-#define MSG_INTENSITY_G                     _UxGT("Intensität Grün")
-#define MSG_INTENSITY_B                     _UxGT("Intensität Blau")
-#define MSG_INTENSITY_W                     _UxGT("Intensität Weiß")
-#define MSG_LED_BRIGHTNESS                  _UxGT("Helligkeit")
-
 #if LCD_WIDTH >= 20
   #define MSG_INFO_PRINT_COUNT              _UxGT("Gesamte Drucke")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Beendete Drucke")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplette Drucke")
   #define MSG_INFO_PRINT_TIME               _UxGT("Gesamte Druckzeit")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längster Druckjob")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längste Druckzeit")
   #define MSG_INFO_PRINT_FILAMENT           _UxGT("Gesamt Extrudiert")
 #else
   #define MSG_INFO_PRINT_COUNT              _UxGT("Drucke")
-  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplett")
-  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamt ")
-  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längster")
+  #define MSG_INFO_COMPLETED_PRINTS         _UxGT("Komplette")
+  #define MSG_INFO_PRINT_TIME               _UxGT("Gesamte")
+  #define MSG_INFO_PRINT_LONGEST            _UxGT("Längste")
   #define MSG_INFO_PRINT_FILAMENT           _UxGT("Extrud.")
 #endif
 
 #define MSG_INFO_MIN_TEMP                   _UxGT("Min Temp")
 #define MSG_INFO_MAX_TEMP                   _UxGT("Max Temp")
 #define MSG_INFO_PSU                        _UxGT("Netzteil")
-
-#define MSG_DRIVE_STRENGTH                  _UxGT("Motorströme")
+#define MSG_DRIVE_STRENGTH                  _UxGT("Motorleistung")
 #define MSG_DAC_PERCENT                     _UxGT("Treiber %")
 #define MSG_DAC_EEPROM_WRITE                _UxGT("Werte speichern")
 #define MSG_FILAMENT_CHANGE_HEADER_PAUSE    _UxGT("DRUCK PAUSIERT")
 #define MSG_FILAMENT_CHANGE_HEADER_LOAD     _UxGT("FILAMENT LADEN")
 #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD   _UxGT("FILAMENT ENTLADEN")
 #define MSG_FILAMENT_CHANGE_OPTION_HEADER   _UxGT("FORTS. OPTIONEN:")
-#define MSG_FILAMENT_CHANGE_OPTION_PURGE    _UxGT("Mehr entleeren")
-#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Drucke weiter")
+#define MSG_FILAMENT_CHANGE_OPTION_PURGE    _UxGT("Mehr entladen")
+#define MSG_FILAMENT_CHANGE_OPTION_RESUME   _UxGT("Druck weiter")
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Düse: ")
 #define MSG_ERR_HOMING_FAILED               _UxGT("Homing gescheitert")
 #define MSG_ERR_PROBING_FAILED              _UxGT("Probing gescheitert")
-#define MSG_M600_TOO_COLD                   _UxGT("M600: Zu kalt")
+#define MSG_M600_TOO_COLD                   _UxGT("M600: zu kalt")
+
+//
+// Die Filament-Change-Bildschirme können bis zu 3 Zeilen auf einem 4-Zeilen-Display anzeigen
+//                                       ...oder 2 Zeilen auf einem 3-Zeilen-Display.
 #if LCD_HEIGHT >= 4
-  // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Warte auf den")
-  #define MSG_FILAMENT_CHANGE_INIT_2          _UxGT("Start des")
-  #define MSG_FILAMENT_CHANGE_INIT_3          _UxGT("Filamentwechsels")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Warte auf")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("Herausnahme")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_3        _UxGT("des Filaments...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Filament einlegen")
-  #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("und Knopf")
-  #define MSG_FILAMENT_CHANGE_INSERT_3        _UxGT("drücken...")
-  #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Knopf drücken um")
-  #define MSG_FILAMENT_CHANGE_HEAT_2          _UxGT("Düse aufzuheizen.")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Düse heizt auf...")
-  #define MSG_FILAMENT_CHANGE_HEATING_2       _UxGT("Bitte warten...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Warte auf")
-  #define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("Laden des")
-  #define MSG_FILAMENT_CHANGE_LOAD_3          _UxGT("Filaments")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Warte auf")
-  #define MSG_FILAMENT_CHANGE_PURGE_2         _UxGT("Entleeren des")
-  #define MSG_FILAMENT_CHANGE_PURGE_3         _UxGT("Filaments")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Warte auf")
-  #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("Fortsetzung des")
-  #define MSG_FILAMENT_CHANGE_RESUME_3        _UxGT("Druckes...")
+  // Up to 3 lines allowed				   
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Warte auf den")
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("Start des")
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("Filamentwechsels...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Filament einlegen")
+  #define MSG_FILAMENT_CHANGE_INSERT_2      _UxGT("und Knopf drücken")
+  #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("um fortzusetzen")
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Knopf drücken um")
+  #define MSG_FILAMENT_CHANGE_HEAT_2        _UxGT("Düse aufzuheizen")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Düse heizt auf")
+  #define MSG_FILAMENT_CHANGE_HEATING_2     _UxGT("bitte warten...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Warte auf")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_2      _UxGT("Herausnahme")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_3      _UxGT("des Filaments...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Warte auf")
+  #define MSG_FILAMENT_CHANGE_LOAD_2        _UxGT("Laden des")
+  #define MSG_FILAMENT_CHANGE_LOAD_3        _UxGT("Filaments...")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Warte auf")
+  #define MSG_FILAMENT_CHANGE_PURGE_2       _UxGT("Entladen des")
+  #define MSG_FILAMENT_CHANGE_PURGE_3       _UxGT("Filaments...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Warte auf")
+  #define MSG_FILAMENT_CHANGE_RESUME_2      _UxGT("Fortsetzen des")
+  #define MSG_FILAMENT_CHANGE_RESUME_3      _UxGT("Drucks...")
 #else // LCD_HEIGHT < 4
   // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Bitte warten...")
-  #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Auswerfen...")
-  #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Laden und Klick")
-  #define MSG_FILAMENT_CHANGE_HEATING_1       _UxGT("Heizen...")
-  #define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Laden...")
-  #define MSG_FILAMENT_CHANGE_PURGE_1         _UxGT("Entleeren...")
-  #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Fortsetzen...")
+  #define MSG_FILAMENT_CHANGE_INIT_1        _UxGT("Bitte warten...")
+  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Laden und Klick")
+  #define MSG_FILAMENT_CHANGE_HEAT_1        _UxGT("Klick zum Heizen")
+  #define MSG_FILAMENT_CHANGE_HEATING_1     _UxGT("Heizen...")
+  #define MSG_FILAMENT_CHANGE_UNLOAD_1      _UxGT("Entladen...")
+  #define MSG_FILAMENT_CHANGE_LOAD_1        _UxGT("Laden...")
+  #define MSG_FILAMENT_CHANGE_PURGE_1       _UxGT("Entladen...")
+  #define MSG_FILAMENT_CHANGE_RESUME_1      _UxGT("Fortsetzen...")
 #endif // LCD_HEIGHT < 4
 
 #endif // LANGUAGE_DE_H

Marlin/language_en.h

@@ -184,6 +184,33 @@
 #ifndef MSG_USER_MENU
   #define MSG_USER_MENU                       _UxGT("Custom Commands")
 #endif
+#ifndef MSG_IDEX_MENU
+  #define MSG_IDEX_MENU                       _UxGT("IDEX Mode")
+#endif
+#ifndef MSG_IDEX_MODE_AUTOPARK
+  #define MSG_IDEX_MODE_AUTOPARK              _UxGT("Auto-Park")
+#endif
+#ifndef MSG_IDEX_MODE_DUPLICATE
+  #define MSG_IDEX_MODE_DUPLICATE             _UxGT("Duplication")
+#endif
+#ifndef MSG_IDEX_MODE_SCALED_COPY
+  #define MSG_IDEX_MODE_SCALED_COPY           _UxGT("Mirror")
+#endif
+#ifndef MSG_IDEX_MODE_FULL_CTRL
+  #define MSG_IDEX_MODE_FULL_CTRL             _UxGT("Full control")
+#endif
+#ifndef MSG_IDEX_X_OFFSET
+  #define MSG_IDEX_X_OFFSET                   _UxGT("2nd nozzle X")
+#endif
+#ifndef MSG_IDEX_Y_OFFSET
+  #define MSG_IDEX_Y_OFFSET                   _UxGT("2nd nozzle Y")
+#endif
+#ifndef MSG_IDEX_Z_OFFSET
+  #define MSG_IDEX_Z_OFFSET                   _UxGT("2nd nozzle Z")
+#endif
+#ifndef MSG_IDEX_SAVE_OFFSETS
+  #define MSG_IDEX_SAVE_OFFSETS               _UxGT("Save Offsets")
+#endif
 #ifndef MSG_UBL_DOING_G29
   #define MSG_UBL_DOING_G29                   _UxGT("Doing G29")
 #endif
@@ -756,6 +783,15 @@
 #ifndef MSG_BLTOUCH
   #define MSG_BLTOUCH                         _UxGT("BLTouch")
 #endif
+#ifndef MSG_BLTOUCH_SW_MODE
+  #define MSG_BLTOUCH_SW_MODE                 _UxGT("SW Deploy BLTouch")
+#endif
+#ifndef MSG_BLTOUCH_5V_MODE
+  #define MSG_BLTOUCH_5V_MODE                 _UxGT("BLTouch 5V Mode")
+#endif
+#ifndef MSG_BLTOUCH_OD_MODE
+  #define MSG_BLTOUCH_OD_MODE                 _UxGT("BLTouch OD Mode")
+#endif
 #ifndef MSG_BLTOUCH_SELFTEST
   #define MSG_BLTOUCH_SELFTEST                _UxGT("BLTouch Self-Test")
 #endif
@@ -1008,6 +1044,13 @@
 #ifndef MSG_M600_TOO_COLD
   #define MSG_M600_TOO_COLD                   _UxGT("M600: Too cold")
 #endif
+#ifndef MSG_LASER_ON
+    #define MSG_LASER_ON _UxGT("Laser on")
+#endif
+
+#ifndef MSG_LASER_OFF
+    #define MSG_LASER_OFF _UxGT("Laser off")
+#endif
 
 //
 // Filament Change screens show up to 3 lines on a 4-line display

Marlin/language_es.h

@@ -251,26 +251,25 @@
 
 #define MSG_FILAMENT_CHANGE_NOZZLE          _UxGT("  Boquilla: ")
 
-#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Esperando iniciar")
+#define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Esperando para")
 
-#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Inserte filamento")
+#define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Inserte el filamento")
 #define MSG_FILAMENT_CHANGE_INSERT_2        _UxGT("y presione el boton")
 
 #if LCD_HEIGHT >= 4
   // Up to 3 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("del filamento")
-  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("cambiar")
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("iniciar cambio")
+  #define MSG_FILAMENT_CHANGE_INIT_3        _UxGT("de filamento")
   #define MSG_FILAMENT_CHANGE_INSERT_3      _UxGT("para continuar...")
 #else // LCD_HEIGHT < 4
   // Up to 2 lines allowed
-  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("del fil. cambiar")
-  #define MSG_FILAMENT_CHANGE_INSERT_1      _UxGT("Inserte filamento")
+  #define MSG_FILAMENT_CHANGE_INIT_2        _UxGT("iniciar cambio fil.")
 #endif // LCD_HEIGHT < 4
 
-#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Esperado por")
-#define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("filamento expulsado")
-#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Esperado por")
-#define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("Cargar filamento")
+#define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Esperando para")
+#define MSG_FILAMENT_CHANGE_UNLOAD_2        _UxGT("expulsar filamento")
+#define MSG_FILAMENT_CHANGE_LOAD_1          _UxGT("Esperado para")
+#define MSG_FILAMENT_CHANGE_LOAD_2          _UxGT("cargar el filamento")
 #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Esperando imp.")
 #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("para resumir")
 #define MSG_FILAMENT_CHANGE_HEAT_1          _UxGT("Oprima boton para")

Marlin/language_pt-br.h

@@ -369,7 +369,7 @@
 
   #define MSG_FILAMENT_CHANGE_RESUME_1        _UxGT("Esperando impressao")
   #define MSG_FILAMENT_CHANGE_RESUME_2        _UxGT("continuar")
-#else LCD_HEIGHT < 4
+#else // LCD_HEIGHT < 4
   #define MSG_FILAMENT_CHANGE_INIT_1          _UxGT("Aguarde...")
   #define MSG_FILAMENT_CHANGE_UNLOAD_1        _UxGT("Ejetando...")
   #define MSG_FILAMENT_CHANGE_INSERT_1        _UxGT("Insira e Clique")

Marlin/pins.h

@@ -128,6 +128,10 @@
   #include "pins_AZTEEG_X3_PRO.h"     // ATmega2560                                 env:megaatmega2560
 #elif MB(ULTIMAIN_2)
   #include "pins_ULTIMAIN_2.h"        // ATmega2560                                 env:megaatmega2560
+#elif MB(FORMBOT_TREX2PLUS)
+  #include "pins_FORMBOT_TREX2PLUS.h" // ATmega2560                                 env:megaatmega2560
+#elif MB(FORMBOT_TREX3)
+  #include "pins_FORMBOT_TREX3.h"     // ATmega2560                                 env:megaatmega2560
 #elif MB(RUMBA)
   #include "pins_RUMBA.h"             // ATmega2560                                 env:megaatmega2560
 #elif MB(BQ_ZUM_MEGA_3D)

Marlin/pins_ANET_10.h

@@ -154,31 +154,32 @@
  */
 
 #if ENABLED(ULTRA_LCD)
-  #define LCD_SDSS           28
+  #define LCD_SDSS         28
   #if ENABLED(ADC_KEYPAD)
-    #define SERVO0_PIN       27   // free for BLTouch/3D-Touch
-    #define LCD_PINS_RS      28
-    #define LCD_PINS_ENABLE  29
-    #define LCD_PINS_D4      10
-    #define LCD_PINS_D5      11
-    #define LCD_PINS_D6      16
-    #define LCD_PINS_D7      17
-    #define BTN_EN1          -1
-    #define BTN_EN2          -1
-    #define BTN_ENC          -1
-    #define ADC_KEYPAD_PIN    1
+    #define SERVO0_PIN     27   // free for BLTouch/3D-Touch
+    #ifndef LCD_I2C_TYPE_PCF8575
+      #define LCD_PINS_RS  28
+      #define LCD_PINS_ENABLE 29
+      #define LCD_PINS_D4  10
+      #define LCD_PINS_D5  11
+      #define LCD_PINS_D6  16
+      #define LCD_PINS_D7  17
+    #endif
+    #ifndef ADC_KEYPAD_PIN
+      #define ADC_KEYPAD_PIN 1   // Analog Input
+    #endif
   #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(ANET_FULL_GRAPHICS_LCD)
     // Pin definitions for the Anet A6 Full Graphics display and the RepRapDiscount Full Graphics
     // display using an adapter board  // https://go.aisler.net/benlye/anet-lcd-adapter/pcb
     // See below for alternative pin definitions for use with https://www.thingiverse.com/thing:2103748
-    #define SERVO0_PIN       29   // free for BLTouch/3D-Touch
-    #define BEEPER_PIN       17
-    #define LCD_PINS_RS      27
-    #define LCD_PINS_ENABLE  28
-    #define LCD_PINS_D4      30
-    #define BTN_EN1          11
-    #define BTN_EN2          10
-    #define BTN_ENC          16
+    #define SERVO0_PIN     29   // free for BLTouch/3D-Touch
+    #define BEEPER_PIN     17
+    #define LCD_PINS_RS    27
+    #define LCD_PINS_ENABLE 28
+    #define LCD_PINS_D4    30
+    #define BTN_EN1        11
+    #define BTN_EN2        10
+    #define BTN_ENC        16
     #ifndef ST7920_DELAY_1
       #define ST7920_DELAY_1 DELAY_NS(0)
     #endif
@@ -192,7 +193,7 @@
     #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
   #endif
 #else
-  #define SERVO0_PIN         27
+  #define SERVO0_PIN       27
 #endif
 
 /**

Marlin/pins_FORMBOT_TREX2PLUS.h

@@ -0,0 +1,194 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Formbot pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+  #error "Formbot supports up to 2 hotends / E-steppers. Comment this line to keep going."
+#endif
+
+#define DEFAULT_MACHINE_NAME "Formbot"
+#define BOARD_NAME           "Formbot"
+
+//
+// Servos
+//
+#define SERVO0_PIN         11
+#define SERVO1_PIN         -1    // was 6
+#define SERVO2_PIN         -1    // was 5
+#define SERVO3_PIN         -1
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN           3
+#ifndef X_MAX_PIN
+  #define X_MAX_PIN         2
+#endif
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          15
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN  32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#ifndef X_CS_PIN
+  #define X_CS_PIN         53
+#endif
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN         49
+#endif
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN         40
+#endif
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN        42
+#endif
+
+#define E1_STEP_PIN        36
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN        44
+#endif
+
+#define E2_STEP_PIN        42
+#define E2_DIR_PIN         43
+#define E2_ENABLE_PIN      44
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         13   // Analog Input
+#define TEMP_1_PIN         15   // Analog Input
+#define TEMP_BED_PIN        3   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN   66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS_PIN   66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+//
+// Augmentation for auto-assigning RAMPS plugs
+//
+#if DISABLED(IS_RAMPS_EEB) &&  DISABLED(IS_RAMPS_EEF) &&  DISABLED(IS_RAMPS_EFB) &&  DISABLED(IS_RAMPS_EFF) &&  DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
+  #if HOTENDS > 1
+    #if TEMP_SENSOR_BED
+      #define IS_RAMPS_EEB
+    #else
+      #define IS_RAMPS_EEF
+    #endif
+  #elif TEMP_SENSOR_BED
+    #define IS_RAMPS_EFB
+  #else
+    #define IS_RAMPS_EFF
+  #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       10
+#define HEATER_1_PIN        7
+#define HEATER_BED_PIN     58
+
+#define FAN_PIN             9
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define FIL_RUNOUT_PIN    4
+  //#define FIL_RUNOUT2_PIN  -1
+#else
+  // Though defined as a fan pin, it is utilized as a dedicated laser pin by Formbot.
+  #define FAN1_PIN          4
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS               53
+#ifndef LED_PIN
+  #define LED_PIN          13   // The Formbot v 1 board has almost no unassigned pins on it.  The Board's LED
+#endif                          // is a good place to get a signal to control the Max7219 LED Matrix.
+
+// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
+#define FILWIDTH_PIN        5   // Analog Input
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN        12
+#endif
+
+#define CASE_LIGHT_PIN      8
+
+//
+// LCD / Controller
+//
+// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
+//
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #ifndef BEEPER_PIN
+    #define BEEPER_PIN     37
+  #endif
+  #define BTN_EN1          31
+  #define BTN_EN2          33
+  #define BTN_ENC          35
+  #define SD_DETECT_PIN    49
+  #ifndef KILL_PIN
+    #define KILL_PIN       41
+  #endif
+  #define LCD_PINS_RS      16
+  #define LCD_PINS_ENABLE  17
+  #define LCD_PINS_D4      23
+  #define LCD_PINS_D5      25
+  #define LCD_PINS_D6      27
+  #define LCD_PINS_D7      29
+#endif

Marlin/pins_FORMBOT_TREX3.h

@@ -0,0 +1,174 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Formbot pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+  #error "Formbot supports up to 2 hotends / E-steppers. Comment this line to keep going."
+#endif
+
+#define DEFAULT_MACHINE_NAME "Formbot"
+#define BOARD_NAME           "Formbot"
+
+//
+// Servos
+//
+#define SERVO0_PIN         11
+#define SERVO1_PIN         -1    // was 6
+#define SERVO2_PIN         -1
+#define SERVO3_PIN         -1
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN           3
+#ifndef X_MAX_PIN
+  #define X_MAX_PIN         2
+#endif
+#define Y_MIN_PIN          14
+#define Y_MAX_PIN          15
+#define Z_MIN_PIN          18
+#define Z_MAX_PIN          19
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN  32
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN         54
+#define X_DIR_PIN          55
+#define X_ENABLE_PIN       38
+#ifndef X_CS_PIN
+  #define X_CS_PIN         53
+#endif
+
+#define Y_STEP_PIN         60
+#define Y_DIR_PIN          61
+#define Y_ENABLE_PIN       56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN         49
+#endif
+
+#define Z_STEP_PIN         46
+#define Z_DIR_PIN          48
+#define Z_ENABLE_PIN       62
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN         40
+#endif
+
+#define E0_STEP_PIN        26
+#define E0_DIR_PIN         28
+#define E0_ENABLE_PIN      24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN        42
+#endif
+
+#define E1_STEP_PIN        36
+#define E1_DIR_PIN         34
+#define E1_ENABLE_PIN      30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN        44
+#endif
+
+#define E2_STEP_PIN        42
+#define E2_DIR_PIN         43
+#define E2_ENABLE_PIN      44
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN         13   // Analog Input
+#define TEMP_1_PIN         15   // Analog Input
+#define TEMP_BED_PIN       14   // Analog Input
+
+// SPI for Max6675 or Max31855 Thermocouple
+#if DISABLED(SDSUPPORT)
+  #define MAX6675_SS_PIN   66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#else
+  #define MAX6675_SS_PIN   66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+#endif
+
+
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN       10
+#define HEATER_1_PIN        7
+#define HEATER_BED_PIN      8
+
+#define FAN_PIN             9
+#define FAN1_PIN           12
+
+#define NUM_RUNOUT_SENSORS  2
+#define FIL_RUNOUT_PIN     22
+#define FIL_RUNOUT2_PIN    21
+
+//
+// Misc. Functions
+//
+#define CASE_LIGHT_PIN      5
+#define SDSS               53
+#ifndef LED_PIN
+  #define LED_PIN          13
+#endif
+
+#define SPINDLE_LASER_PWM_PIN    -1   // MUST BE HARDWARE PWM
+#define SPINDLE_LASER_ENABLE_PIN 4    // Pin should have a pullup!
+
+// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
+#define FILWIDTH_PIN        5   // Analog Input
+
+//
+// LCD / Controller
+//
+// Formbot only supports REPRAP_DISCOUNT_SMART_CONTROLLER
+//
+#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #define LCD_PINS_RS      16
+  #define LCD_PINS_ENABLE  17
+  #define LCD_PINS_D4      23
+  #define LCD_PINS_D5      25
+  #define LCD_PINS_D6      27
+  #define LCD_PINS_D7      29
+  #define BTN_EN1          31
+  #define BTN_EN2          33
+  #define BTN_ENC          35
+  #define SD_DETECT_PIN    49
+  #ifndef KILL_PIN
+    #define KILL_PIN       41
+  #endif
+  #ifndef BEEPER_PIN
+    #define BEEPER_PIN     37
+  #endif
+#endif

Marlin/pins_RAMPS.h

@@ -509,7 +509,7 @@
       #define BTN_ENC           35
 
       #define SD_DETECT_PIN     49
-      #define KILL_PIN          64
+      #define KILL_PIN          41
 
     #elif ENABLED(MINIPANEL)
 

Marlin/pins_RUMBA.h

@@ -28,39 +28,27 @@
   #error "Oops!  Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
 #endif
 
-#if E_STEPPERS > 3 || HOTENDS > 3
-  #error "RUMBA supports up to 3 hotends / E-steppers. Comment this line to keep going."
+#if HOTENDS > 3 || E_STEPPERS > 3
+  #error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue."
 #endif
 
 #define DEFAULT_MACHINE_NAME "Rumba"
 #define BOARD_NAME           "Rumba"
-//#endif
-
-#define LARGE_FLASH true
 
 //
 // Servos
 //
-#ifdef IS_RAMPS_13
-  #define SERVO0_PIN        7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
-#else
-  #define SERVO0_PIN       11
-#endif
-#define SERVO1_PIN          6
-#define SERVO2_PIN          5
-#define SERVO3_PIN          -1
+#define SERVO0_PIN         5
 
 //
 // Limit Switches
 //
-#define X_MIN_PIN           3
-#ifndef X_MAX_PIN
-  #define X_MAX_PIN         2
-#endif
-#define Y_MIN_PIN          14
-#define Y_MAX_PIN          15
-#define Z_MIN_PIN          18
-#define Z_MAX_PIN          19
+#define X_MIN_PIN          37
+#define X_MAX_PIN          36
+#define Y_MIN_PIN          35
+#define Y_MAX_PIN          34
+#define Z_MIN_PIN          33
+#define Z_MAX_PIN          32
 
 //
 // Z Probe (when not Z_MIN_PIN)
@@ -69,255 +57,122 @@
   #define Z_MIN_PROBE_PIN  32
 #endif
 
-#define SLED_PIN           -1
-
 //
 // Steppers
 //
-#define X_STEP_PIN         54
-#define X_DIR_PIN          55
-#define X_ENABLE_PIN       38
-#define X_CS_PIN           53
- 
-#define Y_STEP_PIN         60
-#define Y_DIR_PIN          61
-#define Y_ENABLE_PIN       56
-#define Y_CS_PIN           49
+#define X_STEP_PIN         17
+#define X_DIR_PIN          16
+#define X_ENABLE_PIN       48
 
-#define Z_STEP_PIN         46
-#define Z_DIR_PIN          48
+#define Y_STEP_PIN         54
+#define Y_DIR_PIN          47
+#define Y_ENABLE_PIN       55
+
+#define Z_STEP_PIN         57
+#define Z_DIR_PIN          56
 #define Z_ENABLE_PIN       62
-#define Z_CS_PIN           40
 
-#define E0_STEP_PIN        26
-#define E0_DIR_PIN         28
+#define E0_STEP_PIN        23
+#define E0_DIR_PIN         22
 #define E0_ENABLE_PIN      24
-#define E0_CS_PIN          42
 
-#define E1_STEP_PIN        36
-#define E1_DIR_PIN         34
-#define E1_ENABLE_PIN      30
-#define E1_CS_PIN          44
+#define E1_STEP_PIN        26
+#define E1_DIR_PIN         25
+#define E1_ENABLE_PIN      27
 
-#define E2_STEP_PIN        42
-#define E2_DIR_PIN         43
-#define E2_ENABLE_PIN      44
+#define E2_STEP_PIN        29
+#define E2_DIR_PIN         28
+#define E2_ENABLE_PIN      39
 
 //
 // Temperature Sensors
 //
-#define TEMP_0_PIN         13   // Analog Input
-#define TEMP_1_PIN         15   // Analog Input
-#define TEMP_BED_PIN       14   // Analog Input
-
-// SPI for Max6675 or Max31855 Thermocouple
-#if DISABLED(SDSUPPORT)
-  #define MAX6675_SS       66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
+#if TEMP_SENSOR_0 == -1
+  #define TEMP_0_PIN        6   // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
 #else
-  #define MAX6675_SS       66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
+  #define TEMP_0_PIN       15   // Analog Input (default connector for thermistor *T0* on rumba board is used)
 #endif
 
-//
-// Augmentation for auto-assigning RAMPS plugs
-//
-#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
-  #if HOTENDS > 1
-    #if TEMP_SENSOR_BED
-      #define IS_RAMPS_EEB
-    #else
-      #define IS_RAMPS_EEF
-    #endif
-  #elif TEMP_SENSOR_BED
-    #define IS_RAMPS_EFB
-  #else
-    #define IS_RAMPS_EFF
-  #endif
+#if TEMP_SENSOR_1 == -1
+  #define TEMP_1_PIN        5   // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
+#else
+  #define TEMP_1_PIN       14   // Analog Input (default connector for thermistor *T1* on rumba board is used)
+#endif
+
+#if TEMP_SENSOR_2 == -1
+  #define TEMP_2_PIN        7   // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple)
+#else
+  #define TEMP_2_PIN       13   // Analog Input (default connector for thermistor *T2* on rumba board is used)
+#endif
+
+// optional for extruder 4 or chamber:
+//#define TEMP_X_PIN         12   // Analog Input (default connector for thermistor *T3* on rumba board is used)
+//#define TEMP_CHAMBER_PIN   12   // Analog Input (default connector for thermistor *T3* on rumba board is used)
+
+#if TEMP_SENSOR_BED == -1
+  #define TEMP_BED_PIN      7   // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
+#else
+  #define TEMP_BED_PIN     11   // Analog Input (default connector for thermistor *THB* on rumba board is used)
 #endif
 
 //
 // Heaters / Fans
 //
-#define HEATER_0_PIN        10
-#define HEATER_1_PIN        58
-//#define HEATER_2_PIN        6
-//#define HEATER_3_PIN        8
-#define HEATER_BED_PIN      8
+#define HEATER_0_PIN        2
+#define HEATER_1_PIN        3
+#define HEATER_2_PIN        6
+#define HEATER_3_PIN        8
+#define HEATER_BED_PIN      9
 
-#define LED4_PIN            5
-#define LASER_PIN          -1   
-
-#define FAN_PIN             9
-#define FAN1_PIN           -1
+#ifndef FAN_PIN
+  #define FAN_PIN           7
+#endif
+#define FAN1_PIN            8
 
 //
 // Misc. Functions
 //
 #define SDSS               53
 #define LED_PIN            13
+#define PS_ON_PIN          45
+#define KILL_PIN           46
+#define CASE_LIGHT_PIN     45
 
-// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
-#define FILWIDTH_PIN        5   // Analog Input
-
-// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
-//#define FIL_RUNOUT_PIN      4
-
-#define PS_ON_PIN          12
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#ifndef SPINDLE_LASER_PWM_PIN
+  #define SPINDLE_LASER_PWM_PIN     4   // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
+#endif
+#ifndef SPINDLE_LASER_ENABLE_PIN
+  #define SPINDLE_LASER_ENABLE_PIN 14   // Pin should have a pullup!
+#endif
+#ifndef SPINDLE_DIR_PIN
+  #define SPINDLE_DIR_PIN          15
+#endif
 
 //
 // LCD / Controller
 //
-#if ENABLED(ULTRA_LCD)
-
-  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-    #define LCD_PINS_RS     49 // CS chip select /SS chip slave select
-    #define LCD_PINS_ENABLE 51 // SID (MOSI)
-    #define LCD_PINS_D4     52 // SCK (CLK) clock
-  #elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
-    #define LCD_PINS_RS 40
-    #define LCD_PINS_ENABLE 42
-    #define LCD_PINS_D4 65
-    #define LCD_PINS_D5 66
-    #define LCD_PINS_D6 44
-    #define LCD_PINS_D7 64
-  #else
-    #define LCD_PINS_RS 16
-    #define LCD_PINS_ENABLE 17
-    #define LCD_PINS_D4 23
-    #define LCD_PINS_D5 25
-    #define LCD_PINS_D6 27
-    #define LCD_PINS_D7 29
-    #if DISABLED(NEWPANEL)
-      #define BEEPER_PIN 33
-      // Buttons are attached to a shift register
-      // Not wired yet
-      //#define SHIFT_CLK 38
-      //#define SHIFT_LD 42
-      //#define SHIFT_OUT 40
-      //#define SHIFT_EN 17
-    #endif
-  #endif
-
-  #if ENABLED(NEWPANEL)
-
-    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-      #define BEEPER_PIN 37
-
-      #define BTN_EN1 31
-      #define BTN_EN2 33
-      #define BTN_ENC 35
-
-      #define SD_DETECT_PIN 49
-      #define KILL_PIN 41
-
-      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
-        #define LCD_BACKLIGHT_PIN 39
-      #endif
-
-    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-      #define BTN_EN1 64
-      #define BTN_EN2 59
-      #define BTN_ENC 63
-      #define SD_DETECT_PIN 42
-    #elif ENABLED(LCD_I2C_PANELOLU2)
-      #define BTN_EN1 47  // reverse if the encoder turns the wrong way.
-      #define BTN_EN2 43
-      #define BTN_ENC 32
-      #define LCD_SDSS 53
-      #define SD_DETECT_PIN -1
-      #define KILL_PIN 41
-    #elif ENABLED(LCD_I2C_VIKI)
-      #define BTN_EN1 22  // reverse if the encoder turns the wrong way.
-      #define BTN_EN2 7   // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf
-                          // tells about 40/42.
-                          // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
-      #define BTN_ENC -1
-      #define LCD_SDSS 53
-      #define SD_DETECT_PIN 49
-    #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
-      #define BEEPER_PIN       33
-
-      // Pins for DOGM SPI LCD Support
-      #define DOGLCD_A0        44
-      #define DOGLCD_CS        45
-      #define LCD_SCREEN_ROT_180
-
-      #define BTN_EN1          22
-      #define BTN_EN2           7
-      #define BTN_ENC          39
-
-      #define SDSS             53
-      #define SD_DETECT_PIN    -1  // Pin 49 for display sd interface, 72 for easy adapter board
-
-      #define KILL_PIN         31
-
-      #define STAT_LED_RED_PIN 32
-      #define STAT_LED_BLUE_PIN 35
-
-    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-      #define BTN_EN1 35  // reverse if the encoder turns the wrong way.
-      #define BTN_EN2 37
-      #define BTN_ENC 31
-      #define SD_DETECT_PIN 49
-      #define LCD_SDSS 53
-      #define KILL_PIN 41
-      #define BEEPER_PIN 23
-      #define DOGLCD_CS 29
-      #define DOGLCD_A0 27
-      #define LCD_BACKLIGHT_PIN 33
-    #elif ENABLED(MINIPANEL)
-      #define BEEPER_PIN 42
-      // Pins for DOGM SPI LCD Support
-      #define DOGLCD_A0  44
-      #define DOGLCD_CS  66
-      #define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
-      #define SDSS   53
-
-      #define KILL_PIN 64
-      // GLCD features
-      //#define LCD_CONTRAST 190
-      // Uncomment screen orientation
-      //#define LCD_SCREEN_ROT_90
-      //#define LCD_SCREEN_ROT_180
-      //#define LCD_SCREEN_ROT_270
-      // The encoder and click button
-      #define BTN_EN1 40
-      #define BTN_EN2 63
-      #define BTN_ENC 59
-      // not connected to a pin
-      #define SD_DETECT_PIN 49
-
-    #else
-
-      // Beeper on AUX-4
-      #define BEEPER_PIN 33
-
-      // buttons are directly attached using AUX-2
-      #if ENABLED(REPRAPWORLD_KEYPAD)
-        #define BTN_EN1 64 // encoder
-        #define BTN_EN2 59 // encoder
-        #define BTN_ENC 63 // enter button
-        #define SHIFT_OUT 40 // shift register
-        #define SHIFT_CLK 44 // shift register
-        #define SHIFT_LD 42 // shift register
-      #elif ENABLED(PANEL_ONE)
-        #define BTN_EN1 59 // AUX2 PIN 3
-        #define BTN_EN2 63 // AUX2 PIN 4
-        #define BTN_ENC 49 // AUX3 PIN 7
-      #else
-        #define BTN_EN1 37
-        #define BTN_EN2 35
-        #define BTN_ENC 31 // the click
-      #endif
-
-      #if ENABLED(G3D_PANEL)
-        #define SD_DETECT_PIN 49
-        #define KILL_PIN 41
-      #else
-        //#define SD_DETECT_PIN -1 // Ramps doesn't use this
-      #endif
-
-    #endif
-  #endif // NEWPANEL
-
-#endif // ULTRA_LCD
+#define SD_DETECT_PIN      49
+#define BEEPER_PIN         44
+#define LCD_PINS_D7        40
+#define BTN_EN1            11
+#define BTN_EN2            12
+#define BTN_ENC            43
 
+#if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
+  #define LCD_PINS_DC      38 // Set as output on init
+  #define LCD_PINS_RS      41 // Pull low for 1s to init
+  // DOGM SPI LCD Support
+  #define DOGLCD_CS        19
+  #define DOGLCD_MOSI      42
+  #define DOGLCD_SCK       18
+  #define DOGLCD_A0        LCD_PINS_DC
+#else
+  #define LCD_PINS_RS      19
+  #define LCD_PINS_ENABLE  42
+  #define LCD_PINS_D4      18
+  #define LCD_PINS_D5      38
+  #define LCD_PINS_D6      41
+#endif

Marlin/power_loss_recovery.cpp

@@ -276,7 +276,7 @@ void save_job_recovery_info() {
 
     // If power-loss pin was triggered, write just once then kill
     #if PIN_EXISTS(POWER_LOSS)
-      if (READ(POWER_LOSS_PIN) == POWER_LOSS_STATE) kill(MSG_POWER_LOSS_RECOVERY);
+      if (READ(POWER_LOSS_PIN) == POWER_LOSS_STATE) kill(PSTR(MSG_POWER_LOSS_RECOVERY));
     #endif
   }
 }

Marlin/runout.h

@@ -62,18 +62,23 @@ class FilamentRunoutSensor {
       #else
         // Read the sensor for the active extruder
         bool is_out;
-        switch (active_extruder) {
-          case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
-          case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
-          #if NUM_RUNOUT_SENSORS > 2
-            case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
-            #if NUM_RUNOUT_SENSORS > 3
-              case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
-              #if NUM_RUNOUT_SENSORS > 4
-                case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
+        if(extruder_duplication_enabled)
+        {
+          is_out = (READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING) || (READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING);
+        } else {
+          switch (active_extruder) {
+            case 0: is_out = READ(FIL_RUNOUT_PIN) == FIL_RUNOUT_INVERTING; break;
+            case 1: is_out = READ(FIL_RUNOUT2_PIN) == FIL_RUNOUT_INVERTING; break;
+            #if NUM_RUNOUT_SENSORS > 2
+              case 2: is_out = READ(FIL_RUNOUT3_PIN) == FIL_RUNOUT_INVERTING; break;
+              #if NUM_RUNOUT_SENSORS > 3
+                case 3: is_out = READ(FIL_RUNOUT4_PIN) == FIL_RUNOUT_INVERTING; break;
+                #if NUM_RUNOUT_SENSORS > 4
+                  case 4: is_out = READ(FIL_RUNOUT5_PIN) == FIL_RUNOUT_INVERTING; break;
+                #endif
               #endif
             #endif
-          #endif
+          }
         }
       #endif
       return (is_out ? ++runout_count : (runout_count = 0)) > FIL_RUNOUT_THRESHOLD;

Marlin/stepper.cpp

@@ -222,7 +222,7 @@ int8_t Stepper::count_direction[NUM_AXIS] = {
   #define X_APPLY_DIR(v,ALWAYS) \
     if (extruder_duplication_enabled || ALWAYS) { \
       X_DIR_WRITE(v); \
-      X2_DIR_WRITE(v); \
+      X2_DIR_WRITE(mirrored_duplication_mode ? !(v) : v); \
     } \
     else { \
       if (movement_extruder()) X2_DIR_WRITE(v); else X_DIR_WRITE(v); \

Marlin/temperature.cpp

@@ -247,7 +247,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
    * Alternately heat and cool the nozzle, observing its behavior to
    * determine the best PID values to achieve a stable temperature.
    */
-  void Temperature::PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result/*=false*/) {
+  void Temperature::pid_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result/*=false*/) {
     float current = 0.0;
     int cycles = 0;
     bool heating = true;
@@ -308,6 +308,11 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
       return;
     }
 
+    if (target > GHV(BED_MAXTEMP, maxttemp[hotend]) - 15) {
+      SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH);
+      return;
+    }
+
     SERIAL_ECHOLNPGM(MSG_PID_AUTOTUNE_START);
 
     disable_all_heaters(); // switch off all heaters.
@@ -322,7 +327,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
       const millis_t ms = millis();
 
       if (temp_meas_ready) { // temp sample ready
-        updateTemperaturesFromRawValues();
+        calculate_celsius_temperatures();
 
         // Get the current temperature and constrain it
         current = GHV(current_temperature_bed, current_temperature[hotend]);
@@ -331,7 +336,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
 
         #if HAS_AUTO_FAN
           if (ELAPSED(ms, next_auto_fan_check_ms)) {
-            checkExtruderAutoFans();
+            check_extruder_auto_fans();
             next_auto_fan_check_ms = ms + 2500UL;
           }
         #endif
@@ -478,7 +483,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
           PID_PARAM(Kp, hotend) = workKp; \
           PID_PARAM(Ki, hotend) = scalePID_i(workKi); \
           PID_PARAM(Kd, hotend) = scalePID_d(workKd); \
-          updatePID(); }while(0)
+          update_pid(); }while(0)
 
         // Use the result? (As with "M303 U1")
         if (set_result) {
@@ -519,7 +524,7 @@ int Temperature::getHeaterPower(const int heater) {
 
 #if HAS_AUTO_FAN
 
-  void Temperature::checkExtruderAutoFans() {
+  void Temperature::check_extruder_auto_fans() {
     static const pin_t fanPin[] PROGMEM = { E0_AUTO_FAN_PIN, E1_AUTO_FAN_PIN, E2_AUTO_FAN_PIN, E3_AUTO_FAN_PIN, E4_AUTO_FAN_PIN, CHAMBER_AUTO_FAN_PIN };
     static const uint8_t fanBit[] PROGMEM = {
                     0,
@@ -608,25 +613,20 @@ float Temperature::get_pid_output(const int8_t e) {
       pid_error[HOTEND_INDEX] = target_temperature[HOTEND_INDEX] - current_temperature[HOTEND_INDEX];
       dTerm[HOTEND_INDEX] = PID_K2 * PID_PARAM(Kd, HOTEND_INDEX) * (current_temperature[HOTEND_INDEX] - temp_dState[HOTEND_INDEX]) + float(PID_K1) * dTerm[HOTEND_INDEX];
       temp_dState[HOTEND_INDEX] = current_temperature[HOTEND_INDEX];
-      #if HEATER_IDLE_HANDLER
-        if (heater_idle_timeout_exceeded[HOTEND_INDEX]) {
-          pid_output = 0;
-          pid_reset[HOTEND_INDEX] = true;
-        }
-        else
-      #endif
-      if (pid_error[HOTEND_INDEX] > PID_FUNCTIONAL_RANGE) {
-        pid_output = BANG_MAX;
-        pid_reset[HOTEND_INDEX] = true;
-      }
-      else if (pid_error[HOTEND_INDEX] < -(PID_FUNCTIONAL_RANGE) || target_temperature[HOTEND_INDEX] == 0
+
+      if (target_temperature[HOTEND_INDEX] == 0
+        || pid_error[HOTEND_INDEX] < -(PID_FUNCTIONAL_RANGE)
         #if HEATER_IDLE_HANDLER
           || heater_idle_timeout_exceeded[HOTEND_INDEX]
         #endif
-        ) {
+      ) {
         pid_output = 0;
         pid_reset[HOTEND_INDEX] = true;
       }
+      else if (pid_error[HOTEND_INDEX] > PID_FUNCTIONAL_RANGE) {
+        pid_output = BANG_MAX;
+        pid_reset[HOTEND_INDEX] = true;
+      }
       else {
         if (pid_reset[HOTEND_INDEX]) {
           temp_iState[HOTEND_INDEX] = 0.0;
@@ -759,7 +759,7 @@ void Temperature::manage_heater() {
 
   if (!temp_meas_ready) return;
 
-  updateTemperaturesFromRawValues(); // also resets the watchdog
+  calculate_celsius_temperatures(); // also resets the watchdog
 
   #if ENABLED(HEATER_0_USES_MAX6675)
     if (current_temperature[0] > MIN(HEATER_0_MAXTEMP, MAX6675_TMAX - 1.0)) max_temp_error(0);
@@ -804,7 +804,7 @@ void Temperature::manage_heater() {
 
   #if HAS_AUTO_FAN
     if (ELAPSED(ms, next_auto_fan_check_ms)) { // only need to check fan state very infrequently
-      checkExtruderAutoFans();
+      check_extruder_auto_fans();
       next_auto_fan_check_ms = ms + 2500UL;
     }
   #endif
@@ -914,7 +914,7 @@ void Temperature::manage_heater() {
 
 // Derived from RepRap FiveD extruder::getTemperature()
 // For hot end temperature measurement.
-float Temperature::analog2temp(const int raw, const uint8_t e) {
+float Temperature::analog_to_celsius_hotend(const int raw, const uint8_t e) {
   #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
     if (e > HOTENDS)
   #else
@@ -986,7 +986,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
 #if HAS_HEATED_BED
   // Derived from RepRap FiveD extruder::getTemperature()
   // For bed temperature measurement.
-  float Temperature::analog2tempBed(const int raw) {
+  float Temperature::analog_to_celsius_bed(const int raw) {
     #if ENABLED(HEATER_BED_USES_THERMISTOR)
       SCAN_THERMISTOR_TABLE(BEDTEMPTABLE, BEDTEMPTABLE_LEN);
     #elif ENABLED(HEATER_BED_USES_AD595)
@@ -1002,7 +1002,7 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
 #if HAS_TEMP_CHAMBER
   // Derived from RepRap FiveD extruder::getTemperature()
   // For chamber temperature measurement.
-  float Temperature::analog2tempChamber(const int raw) {
+  float Temperature::analog_to_celsius_chamber(const int raw) {
     #if ENABLED(HEATER_CHAMBER_USES_THERMISTOR)
       SCAN_THERMISTOR_TABLE(CHAMBERTEMPTABLE, CHAMBERTEMPTABLE_LEN);
     #elif ENABLED(HEATER_CHAMBER_USES_AD595)
@@ -1021,22 +1021,22 @@ float Temperature::analog2temp(const int raw, const uint8_t e) {
  * and this function is called from normal context
  * as it would block the stepper routine.
  */
-void Temperature::updateTemperaturesFromRawValues() {
+void Temperature::calculate_celsius_temperatures() {
   #if ENABLED(HEATER_0_USES_MAX6675)
     current_temperature_raw[0] = read_max6675();
   #endif
-  HOTEND_LOOP() current_temperature[e] = Temperature::analog2temp(current_temperature_raw[e], e);
+  HOTEND_LOOP() current_temperature[e] = analog_to_celsius_hotend(current_temperature_raw[e], e);
   #if HAS_HEATED_BED
-    current_temperature_bed = Temperature::analog2tempBed(current_temperature_bed_raw);
+    current_temperature_bed = analog_to_celsius_bed(current_temperature_bed_raw);
   #endif
   #if HAS_TEMP_CHAMBER
-    current_temperature_chamber = Temperature::analog2tempChamber(current_temperature_chamber_raw);
+    current_temperature_chamber = analog_to_celsius_chamber(current_temperature_chamber_raw);
   #endif
   #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
-    redundant_temperature = Temperature::analog2temp(redundant_temperature_raw, 1);
+    redundant_temperature = analog_to_celsius_hotend(redundant_temperature_raw, 1);
   #endif
   #if ENABLED(FILAMENT_WIDTH_SENSOR)
-    filament_width_meas = analog2widthFil();
+    filament_width_meas = analog_to_mm_fil_width();
   #endif
 
   #if ENABLED(USE_WATCHDOG)
@@ -1051,7 +1051,7 @@ void Temperature::updateTemperaturesFromRawValues() {
 #if ENABLED(FILAMENT_WIDTH_SENSOR)
 
   // Convert raw Filament Width to millimeters
-  float Temperature::analog2widthFil() {
+  float Temperature::analog_to_mm_fil_width() {
     return current_raw_filwidth * 5.0f * (1.0f / 16383.0);
   }
 
@@ -1251,7 +1251,7 @@ void Temperature::init() {
 
   #define TEMP_MIN_ROUTINE(NR) \
     minttemp[NR] = HEATER_ ##NR## _MINTEMP; \
-    while (analog2temp(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
+    while (analog_to_celsius_hotend(minttemp_raw[NR], NR) < HEATER_ ##NR## _MINTEMP) { \
       if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
         minttemp_raw[NR] += OVERSAMPLENR; \
       else \
@@ -1259,7 +1259,7 @@ void Temperature::init() {
     }
   #define TEMP_MAX_ROUTINE(NR) \
     maxttemp[NR] = HEATER_ ##NR## _MAXTEMP; \
-    while (analog2temp(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
+    while (analog_to_celsius_hotend(maxttemp_raw[NR], NR) > HEATER_ ##NR## _MAXTEMP) { \
       if (HEATER_ ##NR## _RAW_LO_TEMP < HEATER_ ##NR## _RAW_HI_TEMP) \
         maxttemp_raw[NR] -= OVERSAMPLENR; \
       else \
@@ -1307,7 +1307,7 @@ void Temperature::init() {
 
   #if HAS_HEATED_BED
     #ifdef BED_MINTEMP
-      while (analog2tempBed(bed_minttemp_raw) < BED_MINTEMP) {
+      while (analog_to_celsius_bed(bed_minttemp_raw) < BED_MINTEMP) {
         #if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
           bed_minttemp_raw += OVERSAMPLENR;
         #else
@@ -1316,7 +1316,7 @@ void Temperature::init() {
       }
     #endif // BED_MINTEMP
     #ifdef BED_MAXTEMP
-      while (analog2tempBed(bed_maxttemp_raw) > BED_MAXTEMP) {
+      while (analog_to_celsius_bed(bed_maxttemp_raw) > BED_MAXTEMP) {
         #if HEATER_BED_RAW_LO_TEMP < HEATER_BED_RAW_HI_TEMP
           bed_maxttemp_raw -= OVERSAMPLENR;
         #else

Marlin/temperature.h

@@ -318,13 +318,13 @@ class Temperature {
     /**
      * Static (class) methods
      */
-    static float analog2temp(const int raw, const uint8_t e);
+    static float analog_to_celsius_hotend(const int raw, const uint8_t e);
 
     #if HAS_HEATED_BED
-      static float analog2tempBed(const int raw);
+      static float analog_to_celsius_bed(const int raw);
     #endif
     #if HAS_TEMP_CHAMBER
-      static float analog2tempChamber(const int raw);
+      static float analog_to_celsius_chamber(const int raw);
     #endif
 
     /**
@@ -365,7 +365,7 @@ class Temperature {
     #endif
 
     #if ENABLED(FILAMENT_WIDTH_SENSOR)
-      static float analog2widthFil();         // Convert raw Filament Width to millimeters
+      static float analog_to_mm_fil_width();         // Convert raw Filament Width to millimeters
       static int8_t widthFil_to_size_ratio(); // Convert Filament Width (mm) to an extrusion ratio
     #endif
 
@@ -414,7 +414,7 @@ class Temperature {
       #if ENABLED(AUTO_POWER_CONTROL)
         powerManager.power_on();
       #endif
-      target_temperature[HOTEND_INDEX] = celsius;
+      target_temperature[HOTEND_INDEX] = MIN(celsius, maxttemp[HOTEND_INDEX] - 15);
       #if WATCH_HOTENDS
         start_watching_heater(HOTEND_INDEX);
       #endif
@@ -449,7 +449,7 @@ class Temperature {
         #endif
         target_temperature_bed =
           #ifdef BED_MAXTEMP
-            MIN(celsius, BED_MAXTEMP)
+            MIN(celsius, BED_MAXTEMP - 15)
           #else
             celsius
           #endif
@@ -489,13 +489,13 @@ class Temperature {
      * Perform auto-tuning for hotend or bed in response to M303
      */
     #if HAS_PID_HEATING
-      static void PID_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false);
+      static void pid_autotune(const float &target, const int8_t hotend, const int8_t ncycles, const bool set_result=false);
 
       /**
        * Update the temp manager when PID values change
        */
       #if ENABLED(PIDTEMP)
-        FORCE_INLINE static void updatePID() {
+        FORCE_INLINE static void update_pid() {
           #if ENABLED(PID_EXTRUSION_SCALING)
             last_e_position = 0;
           #endif
@@ -612,13 +612,13 @@ class Temperature {
 
     static void set_current_temp_raw();
 
-    static void updateTemperaturesFromRawValues();
+    static void calculate_celsius_temperatures();
 
     #if ENABLED(HEATER_0_USES_MAX6675)
       static int read_max6675();
     #endif
 
-    static void checkExtruderAutoFans();
+    static void check_extruder_auto_fans();
 
     static float get_pid_output(const int8_t e);
 

Marlin/thermistornames.h

@@ -87,6 +87,8 @@
   #define THERMISTOR_NAME "PT100 1K"
 
 // High Temperature thermistors
+#elif THERMISTOR_ID == 61
+  #define THERMISTOR_NAME "Formbot 350°C"
 #elif THERMISTOR_ID == 66
   #define THERMISTOR_NAME "Dyze 4.7M"
 

Marlin/thermistortable_61.h

@@ -0,0 +1,115 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
+// Formbot / Vivedino high temp 100k thermistor
+// 100KR13950181203
+// Generated with modified version of https://www.thingiverse.com/thing:103668
+// Using table 1 with datasheet values
+// Resistance         100k Ohms at 25deg. C
+// Resistance Tolerance     + / -1%
+// B Value             3950K at 25/50 deg. C
+// B Value Tolerance         + / - 1%
+const short temptable_61[][2] PROGMEM = {
+  { OV(   2.00), 420 }, // Guestimate to ensure we dont lose a reading and drop temps to -50 when over
+  { OV(  12.07), 350 },
+  { OV(  12.79), 345 },
+  { OV(  13.59), 340 },
+  { OV(  14.44), 335 },
+  { OV(  15.37), 330 },
+  { OV(  16.38), 325 },
+  { OV(  17.46), 320 },
+  { OV(  18.63), 315 },
+  { OV(  19.91), 310 },
+  { OV(  21.29), 305 },
+  { OV(  22.79), 300 },
+  { OV(  24.43), 295 },
+  { OV(  26.21), 290 },
+  { OV(  28.15), 285 },
+  { OV(  30.27), 280 },
+  { OV(  32.58), 275 },
+  { OV(  35.10), 270 },
+  { OV(  38.44), 265 },
+  { OV(  40.89), 260 },
+  { OV(  44.19), 255 },
+  { OV(  47.83), 250 },
+  { OV(  51.80), 245 },
+  { OV(  56.20), 240 },
+  { OV(  61.00), 235 },
+  { OV(  66.30), 230 },
+  { OV(  72.11), 225 },
+  { OV(  78.51), 220 },
+  { OV(  85.57), 215 },
+  { OV(  93.34), 210 },
+  { OV( 101.91), 205 },
+  { OV( 111.34), 200 },
+  { OV( 121.73), 195 },
+  { OV( 133.17), 190 },
+  { OV( 145.74), 185 },
+  { OV( 159.57), 180 },
+  { OV( 174.73), 175 },
+  { OV( 191.35), 170 },
+  { OV( 209.53), 165 },
+  { OV( 229.35), 160 },
+  { OV( 250.90), 155 },
+  { OV( 274.25), 150 },
+  { OV( 299.46), 145 },
+  { OV( 326.52), 140 },
+  { OV( 355.44), 135 },
+  { OV( 386.15), 130 },
+  { OV( 418.53), 125 },
+  { OV( 452.43), 120 },
+  { OV( 487.62), 115 },
+  { OV( 523.82), 110 },
+  { OV( 560.70), 105 },
+  { OV( 597.88), 100 },
+  { OV( 634.97),  95 },
+  { OV( 671.55),  90 },
+  { OV( 707.21),  85 },
+  { OV( 741.54),  80 },
+  { OV( 779.65),  75 },
+  { OV( 809.57),  70 },
+  { OV( 833.40),  65 },
+  { OV( 859.55),  60 },
+  { OV( 883.27),  55 },
+  { OV( 904.53),  50 },
+  { OV( 923.38),  45 },
+  { OV( 939.91),  40 },
+  { OV( 954.26),  35 },
+  { OV( 966.59),  30 },
+  { OV( 977.08),  25 },
+  { OV( 985.92),  20 },
+  { OV( 993.39),  15 },
+  { OV( 999.42),  10 },
+  { OV(1004.43),   5 },
+  { OV(1008.51),   0 },
+  { OV(1011.79),  -5 },
+  { OV(1014.40), -10 },
+  { OV(1016.48), -15 },
+  { OV(1018.10), -20 },
+  { OV(1019.35), -25 },
+  { OV(1020.32), -30 },
+  { OV(1021.05), -35 },
+  { OV(1021.60), -40 },
+  { OV(1022.01), -45 },
+  { OV(1022.31), -50 }
+};

Marlin/thermistortable_67.h

@@ -0,0 +1,80 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+// R25 = 500 KOhm, beta25 = 3800 K, 4.7 kOhm pull-up, SliceEngineering 450 °C Thermistor
+const short temptable_67[][2] PROGMEM = {
+  { OV(  22 ),  500 },
+  { OV(  23 ),  490 },
+  { OV(  25 ),  480 },
+  { OV(  27 ),  470 },
+  { OV(  29 ),  460 },
+  { OV(  32 ),  450 },
+  { OV(  35 ),  440 },
+  { OV(  38 ),  430 },
+  { OV(  41 ),  420 },
+  { OV(  45 ),  410 },
+  { OV(  50 ),  400 },
+  { OV(  55 ),  390 },
+  { OV(  60 ),  380 },
+  { OV(  67 ),  370 },
+  { OV(  74 ),  360 },
+  { OV(  82 ),  350 },
+  { OV(  91 ),  340 },
+  { OV( 102 ),  330 },
+  { OV( 114 ),  320 },
+  { OV( 127 ),  310 },
+  { OV( 143 ),  300 },
+  { OV( 161 ),  290 },
+  { OV( 181 ),  280 },
+  { OV( 204 ),  270 },
+  { OV( 229 ),  260 },
+  { OV( 259 ),  250 },
+  { OV( 290 ),  240 },
+  { OV( 325 ),  230 },
+  { OV( 364 ),  220 },
+  { OV( 407 ),  210 },
+  { OV( 453 ),  200 },
+  { OV( 501 ),  190 },
+  { OV( 551 ),  180 },
+  { OV( 603 ),  170 },
+  { OV( 655 ),  160 },
+  { OV( 706 ),  150 },
+  { OV( 755 ),  140 },
+  { OV( 801 ),  130 },
+  { OV( 842 ),  120 },
+  { OV( 879 ),  110 },
+  { OV( 910 ),  100 },
+  { OV( 936 ),   90 },
+  { OV( 948 ),   85 },
+  { OV( 958 ),   80 },
+  { OV( 975 ),   70 },
+  { OV( 988 ),   60 },
+  { OV( 998 ),   50 },
+  { OV(1006 ),   40 },
+  { OV(1011 ),   30 },
+  { OV(1013 ),   25 },
+  { OV(1015 ),   20 },
+  { OV(1018 ),   10 },
+  { OV(1020 ),    0 },
+  { OV(1021 ),  -10 },
+  { OV(1022 ),  -20 }
+};

Marlin/thermistortables.h

@@ -101,6 +101,9 @@
 #if ANY_THERMISTOR_IS(60) // Maker's Tool Works Kapton Bed Thermistor
   #include "thermistortable_60.h"
 #endif
+#if ANY_THERMISTOR_IS(61) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Formbot 350°C Thermistor"
+  #include "thermistortable_61.h"
+#endif
 #if ANY_THERMISTOR_IS(66) // DyzeDesign 500°C Thermistor
   #include "thermistortable_66.h"
 #endif