Bump to head, add new filament sensor type

Issue with G29 tool change still exists upstream. Function is out of scope where called and override leaves blank. Added a command to force T0 in custom menu items when initializing UBL as workaround. Needs permenant fix.

.github/code_of_conduct.md

@@ -0,0 +1,46 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at [marlinfirmware@github.com](mailto:marlinfirmware@github.com). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [https://contributor-covenant.org/version/1/4][version]
+
+[homepage]: https://contributor-covenant.org
+[version]: https://contributor-covenant.org/version/1/4/

.github/contributing.md

@@ -0,0 +1,144 @@
+# Contributing to Marlin
+
+Thanks for your interest in contributing to Marlin Firmware!
+
+The following is a set of guidelines for contributing to Marlin, hosted by the [MarlinFirmware Organization](https://github.com/MarlinFirmware) on GitHub. These are mostly guidelines, not rules. Use your best judgment, and feel free to propose changes to this document in a Pull Request.
+
+#### Table Of Contents
+
+[Code of Conduct](#code-of-conduct)
+
+[I don't want to read this whole thing, I just have a question!!!](#i-dont-want-to-read-this-whole-thing-i-just-have-a-question)
+
+[How Can I Contribute?](#how-can-i-contribute)
+  * [Reporting Bugs](#reporting-bugs)
+  * [Suggesting Features or Changes](#suggesting-features-or-changes)
+  * [Your First Code Contribution](#your-first-code-contribution)
+  * [Pull Requests](#pull-requests)
+
+[Styleguides](#styleguides)
+  * [Git Commit Messages](#git-commit-messages)
+  * [C++ Coding Standards](#c++-coding-standards)
+  * [Documentation Styleguide](#documentation)
+
+[Additional Notes](#additional-notes)
+  * [Issue and Pull Request Labels](#issue-and-pull-request-labels)
+
+## Code of Conduct
+
+This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [marlinfirmware@github.com](mailto:marlinfirmware@github.com).
+
+## I don't want to read this whole thing I just have a question!!!
+
+> **Note:** Please don't file an issue to ask a question. You'll get faster results by using the resources below.
+
+We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
+
+* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
+* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
+
+If chat is more your speed, you can join the MarlinFirmware Slack team:
+
+* Join the Marlin Slack Team
+  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
+  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
+  * Use the `#general` channel for general questions or discussion about Marlin.
+  * Other channels exist for certain topics. Check the channel list.
+
+## How Can I Contribute?
+
+### Reporting Bugs
+
+This section guides you through submitting a Bug Report for Marlin. Following these guidelines helps maintainers and the community understand your report, reproduce the behavior, and find related reports.
+
+Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](issue_template.md), the information it asks for helps us resolve issues faster.
+
+> **Note:** Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
+
+#### How Do I Submit A (Good) Bug Report?
+
+Bugs are tracked as [GitHub issues](https://guides.github.com/features/issues/). Use the New Issue button to create an issue and provide the following information by filling in [the template](issue_template.md).
+
+Explain the problem and include additional details to help maintainers reproduce the problem:
+
+* **Use a clear and descriptive title** for the issue to identify the problem.
+* **Describe the exact steps which reproduce the problem** in as many details as possible. For example, start by explaining how you started Marlin, e.g. which command exactly you used in the terminal, or how you started Marlin otherwise. When listing steps, **don't just say what you did, but explain how you did it**. For example, if you moved the cursor to the end of a line, explain if you used the mouse, or a keyboard shortcut or an Marlin command, and if so which one?
+* **Provide specific examples to demonstrate the steps**. Include links to files or GitHub projects, or copy/pasteable snippets, which you use in those examples. If you're providing snippets or log output in the issue, use [Markdown code blocks](https://help.github.com/articles/markdown-basics/#multiple-lines).
+* **Describe the behavior you observed after following the steps** and point out what exactly is the problem with that behavior.
+* **Explain which behavior you expected to see instead and why.**
+* **Include detailed log output** especially for probing and leveling. See below for usage of `DEBUG_LEVELING_FEATURE`.
+* **Include screenshots, links to videos, etc.** which clearly demonstrate the problem.
+* **Include G-code** (if relevant) that reliably causes the problem to show itself.
+* **If the problem wasn't triggered by a specific action**, describe what you were doing before the problem happened and share more information using the guidelines below.
+
+Provide more context:
+
+* **Can you reproduce the problem with a minimum of options enabled?**
+* **Did the problem start happening recently** (e.g. after updating to a new version of Marlin) or was this always a problem?
+* If the problem started happening recently, **can you reproduce the problem in an older version of Marlin?** What's the most recent version in which the problem doesn't happen? You can download older versions of Marlin from [the releases page](https://github.com/MarlinFirmware/Marlin/releases).
+* **Can you reliably reproduce the issue?** If not, provide details about how often the problem happens and under which conditions it normally happens.
+
+Include details about your configuration and environment:
+
+* **Which version of Marlin are you using?** Marlin's exact version and build date can be seen in the startup message when a host connects to Marlin, or in the LCD Info menu (if enabled).
+* **What kind of 3D Printer and electronics are you using**?
+* **What kind of add-ons (probe, filament sensor) do you have**?
+* **Include your Configuration files.** Make a ZIP file containing `Configuration.h` and `Configuration_adv.h` and drop it on your reply.
+
+### Suggesting Features or Changes
+
+This section guides you through submitting a suggestion for Marlin, including completely new features and minor improvements to existing functionality. Following these guidelines helps maintainers and the community understand your suggestion and find related suggestions.
+
+Before creating a suggestion, please check [this list](#before-submitting-a-suggestion) as you might find out that you don't need to create one. When you are creating an enhancement suggestion, please [include as many details as possible](#how-do-i-submit-a-good-enhancement-suggestion). Fill in [the template](issue_template.md), including the steps that you imagine you would take if the feature you're requesting existed.
+
+#### Before Submitting a Feature Request
+
+* **Check the [Marlin website](http://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](http://marlinfw.org/docs/configuration/configuration.html).
+* **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
+
+#### How Do I Submit A (Good) Feature Request?
+
+Feature Requests are tracked as [GitHub issues](https://guides.github.com/features/issues/). Please follow these guidelines in your request:
+
+* **Use a clear and descriptive title** for the issue to identify the suggestion.
+* **Provide a step-by-step description of the requested feature** in as much detail as possible.
+* **Provide specific examples to demonstrate the steps**.
+* **Describe the current behavior** and **explain which behavior you expected to see instead** and why.
+* **Include screenshots and links to videos** which demonstrate the feature or point out the part of Marlin to which the request is related.
+* **Explain why this feature would be useful** to most Marlin users.
+* **Name other firmwares that have this feature, if any.**
+
+### Your First Code Contribution
+
+Unsure where to begin contributing to Marlin? You can start by looking through these `good-first-issue` and `help-wanted` issues:
+
+* [Beginner issues][good-first-issue] - issues which should only require a few lines of code, and a test or two.
+* [Help Wanted issues][help-wanted] - issues which should be a bit more involved than `beginner` issues.
+
+### Pull Requests
+
+Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+
+* Fill in [the required template](pull_request_template.md).
+* Don't include issue numbers in the PR title.
+* Include pictures, diagrams, and links to videos in your Pull Request to demonstrate your changes, if needed.
+* Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website.
+* Document new code with clear and concise comments.
+* End all files with a newline.
+
+## Styleguides
+
+### Git Commit Messages
+
+* Use the present tense ("Add feature" not "Added feature").
+* Use the imperative mood ("Move cursor to..." not "Moves cursor to...").
+* Limit the first line to 72 characters or fewer.
+* Reference issues and Pull Requests liberally after the first line.
+
+### C++ Coding Standards
+
+* Please read and follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
+
+### Documentation
+
+* Guidelines for documentation are still under development. In-general, be clear, concise, and to-the-point.

.github/issue_template.md

@@ -1,36 +1,31 @@
-Thank you for submitting your feedback to the Marlin project.
-Please use one of the templates below to fill out this box.
+<!--
 
-------------------------------------------------------------
-### Feature Request
-Please put [FR] in the issue title: `[FR] Add-on that goes 'ping'`
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
 
-------------------------------------------------------------
-### Compile Error
-When I compile with `FEATURE_X` I get an error:
-```
-Paste_the_error_text_here
-```
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/.
 
-------------------------------------------------------------
-### Bug Report
-- Description: ---
-- Expected behaviour: ---
-- Actual behaviour: ---
-- Steps to reproduce:
-  - Do this
-  - Do that
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
 
-Attach a ZIP of `Configuration.h` and `Configuration_adv.h` by dropping here.
+-->
 
-------------------------------------------------------------
-### Bug Report Tips
-- When troubleshooting, use `M502` followed by `M500` to reset EEPROM to defaults.
-- Use `DEBUG_LEVELING_FEATURE` with `M111 S247` for detailed logging of homing/leveling.
-- Format text with: **bold**, _italic_, `code`.
-- Format C++ with three backticks, plus "cpp":
-```cpp
-void my_function(bool do_it) {
-  // Hold this spot
-}
-```
+### Description
+
+<!-- Description of the bug or requested feature -->
+
+### Steps to Reproduce
+
+<!-- If this is a Bug Report, please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.

.github/pull_request_template.md

@@ -0,0 +1,19 @@
+### Requirements
+
+* Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.
+
+### Description
+
+<!--
+
+We must be able to understand your proposed change from this description. If we can't understand what the code will do from this description, the Pull Request may be closed at the maintainers' discretion. Keep in mind that the maintainer reviewing this PR may not be familiar with or have worked with the code recently, so please walk us through the concepts.
+
+-->
+
+### Benefits
+
+<!-- What does this fix or improve? -->
+
+### Related Issues
+
+<!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.gitignore

@@ -134,7 +134,10 @@ vc-fileutils.settings
 
 #VScode
 .vscode
+.vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/*.db
 
 #cmake
 CMakeLists.txt
@@ -143,3 +146,6 @@ CMakeListsPrivate.txt
 
 #CLion
 cmake-build-*
+TRex_CurrentFixes_20180725.zip.tmp
+Marlin/TRexCrashFixes_20180727.zip
+*.zip

.travis.yml

@@ -22,10 +22,10 @@ before_install:
   #
 install:
   #
-  # Install arduino 1.6.10
-  - wget http://downloads-02.arduino.cc/arduino-1.6.10-linux64.tar.xz
-  - tar xf arduino-1.6.10-linux64.tar.xz
-  - sudo mv arduino-1.6.10 /usr/local/share/arduino
+  # Install arduino 1.8.5
+  - wget http://downloads-02.arduino.cc/arduino-1.8.5-linux64.tar.xz
+  - tar xf arduino-1.8.5-linux64.tar.xz
+  - sudo mv arduino-1.8.5 /usr/local/share/arduino
   - ln -s /usr/local/share/arduino/arduino ${TRAVIS_BUILD_DIR}/buildroot/bin/arduino
   #
   # Install: LiquidCrystal_I2C library
@@ -90,26 +90,35 @@ script:
   - opt_set TEMP_SENSOR_0 -2
   - opt_set TEMP_SENSOR_1 1
   - opt_set TEMP_SENSOR_BED 1
-  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS
+  - opt_set POWER_SUPPLY 1
+  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING
   - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
-  - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED
+  - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_LED AUTO_POWER_CONTROL NOZZLE_PARK_FEATURE FILAMENT_RUNOUT_SENSOR
   - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
-  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU
-  - opt_set ABL_GRID_POINTS_X 16
-  - opt_set ABL_GRID_POINTS_Y 16
+  - opt_enable_adv ARC_P_CIRCLES ADVANCED_PAUSE_FEATURE CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS POWER_LOSS_RECOVERY
+  - opt_enable_adv FWRETRACT MAX7219_DEBUG LED_CONTROL_MENU CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CODEPENDENT_XY_HOMING
+  - opt_set GRID_MAX_POINTS_X 16
   - opt_set_adv FANMUX0_PIN 53
   - build_marlin
   #
-  # Test a probeless build of AUTO_BED_LEVELING_UBL
+  # Test a probeless build of AUTO_BED_LEVELING_UBL, with lots of extruders
   #
   - restore_configs
-  - opt_enable AUTO_BED_LEVELING_UBL DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL
-  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING NANODLP_Z_SYNC
+  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
+  - opt_set EXTRUDERS 5
+  - opt_set TEMP_SENSOR_1 1
+  - opt_set TEMP_SENSOR_2 5
+  - opt_set TEMP_SENSOR_3 20
+  - opt_set TEMP_SENSOR_4 999
+  - opt_set TEMP_SENSOR_BED 1
+  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 DEBUG_LEVELING_FEATURE G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT EEPROM_SETTINGS EEPROM_CHITCHAT G3D_PANEL SKEW_CORRECTION
+  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING BABYSTEP_XY LIN_ADVANCE NANODLP_Z_SYNC QUICK_HOME
   - build_marlin
   #
-  # Add a Sled Z Probe, use UBL Cartesian moves
+  # Add a Sled Z Probe, use UBL Cartesian moves, use Japanese language
   #
-  - opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE
+  - opt_set LANGUAGE kana_utf8
+  - opt_enable Z_PROBE_SLED SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE BEZIER_JERK_CONTROL
   - opt_disable SEGMENT_LEVELED_MOVES
   - opt_enable_adv BABYSTEP_ZPROBE_OFFSET DOUBLECLICK_FOR_Z_BABYSTEPPING
   - build_marlin
@@ -118,7 +127,7 @@ script:
   # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
   #
   - restore_configs
-  - opt_enable NUM_SERVOS Z_ENDSTOP_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
+  - opt_enable NUM_SERVOS Z_PROBE_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
   - opt_set NUM_SERVOS 1
   - opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
   - opt_enable_adv NO_VOLUMETRICS EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
@@ -134,8 +143,8 @@ script:
   #      PROBE_MANUALLY feature, with LCD support,
   #      ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
   #      PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
-  #      Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
-  #      ADVANCED_PAUSE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
+  #      Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
+  #      ADVANCED_PAUSE_FEATURE, ADVANCED_PAUSE_CONTINUOUS_PURGE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU, M114_DETAIL
   #      EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
   #      INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
   #
@@ -144,9 +153,9 @@ script:
   - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR G26_MESH_EDITING LCD_BED_LEVELING ULTIMAKERCONTROLLER
   - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
   - opt_enable ULTIMAKERCONTROLLER SDSUPPORT
-  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632 USE_XMAX_PLUG
+  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
   - opt_enable_adv BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
-  - opt_enable_adv ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
+  - opt_enable_adv ADVANCED_PAUSE_FEATURE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES PARK_HEAD_ON_PAUSE LCD_INFO_MENU M114_DETAIL
   - opt_set_adv PWM_MOTOR_CURRENT {1300,1300,1250}
   - opt_set_adv I2C_SLAVE_ADDRESS 63
   - build_marlin
@@ -257,7 +266,7 @@ script:
   #
   - restore_configs
   - opt_enable G3D_PANEL SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES
+  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING SCROLL_LONG_FILENAMES LIGHTWEIGHT_UI
   - opt_set_adv SDSORT_GCODE true
   - opt_set_adv SDSORT_USES_RAM true
   - opt_set_adv SDSORT_USES_STACK true
@@ -290,10 +299,10 @@ script:
   # Most I2C configurations are failing at the moment because they require
   # a different Liquid Crystal library "LiquidTWI2".
   #
-  # LCD_I2C_SAINSMART_YWROBOT
+  # LCD_SAINSMART_I2C_1602
   #
   #- restore_configs
-  #- opt_enable LCD_I2C_SAINSMART_YWROBOT
+  #- opt_enable LCD_SAINSMART_I2C_1602
   #- build_marlin
   #
   # LCD_I2C_PANELOLU2
@@ -331,7 +340,7 @@ script:
   #
   - use_example_configs delta/generic
   - opt_disable DISABLE_MIN_ENDSTOPS
-  - opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
+  - opt_enable AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2 MESH_EDIT_GFX_OVERLAY
   - build_marlin
   #
   # Delta Config (FLSUN AC because it's complex)
@@ -344,19 +353,12 @@ script:
   #- use_example_configs makibox
   #- build_marlin
   #
-  # SCARA with TMC2130
+  # SCARA with TMC2130 and TMC2208
   #
   - use_example_configs SCARA
-  - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
-  - opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
-  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG SENSORLESS_HOMING
-  - build_marlin
-  #
-  # TMC2208 Config
-  #
-  - restore_configs
-  - opt_enable_adv HAVE_TMC2208 X_IS_TMC2208 Y_IS_TMC2208 Z_IS_TMC2208
-  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG
+  - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER SCARA_FEEDRATE_SCALING
+  - opt_enable_adv HAVE_TMC2130 HAVE_TMC2208 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2208 E0_IS_TMC2208
+  - opt_enable_adv MONITOR_DRIVER_STATUS STEALTHCHOP HYBRID_THRESHOLD TMC_DEBUG SENSORLESS_HOMING TMC_Z_CALIBRATION
   - build_marlin
   #
   # tvrrug Config need to check board type for sanguino atmega644p

Marlin/Conditionals_LCD.h

@@ -28,451 +28,501 @@
 #ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
 #define CONDITIONALS_LCD_H
 
-  #define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
+#define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
 
-  #if ENABLED(CARTESIO_UI)
+#if ENABLED(CARTESIO_UI)
 
-    #define DOGLCD
-    #define ULTIPANEL
-    #define DEFAULT_LCD_CONTRAST 90
-    #define LCD_CONTRAST_MIN 60
-    #define LCD_CONTRAST_MAX 140
+  #define DOGLCD
+  #define ULTIPANEL
+  #define DEFAULT_LCD_CONTRAST 90
+  #define LCD_CONTRAST_MIN 60
+  #define LCD_CONTRAST_MAX 140
 
-  #elif ENABLED(MAKRPANEL)
+#elif ENABLED(MAKRPANEL)
 
+  #define U8GLIB_ST7565_64128N
+
+#elif ENABLED(ZONESTAR_LCD)
+
+  #define REPRAPWORLD_KEYPAD
+  #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+  #define ADC_KEYPAD
+  #define ADC_KEY_NUM 8
+  #define ULTIPANEL
+
+  // this helps to implement ADC_KEYPAD menus
+  #define ENCODER_PULSES_PER_STEP 1
+  #define ENCODER_STEPS_PER_MENU_ITEM 1
+  #define ENCODER_FEEDRATE_DEADZONE 2
+  #define REVERSE_MENU_DIRECTION
+
+#elif ENABLED(ANET_FULL_GRAPHICS_LCD)
+
+  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+#elif ENABLED(BQ_LCD_SMART_CONTROLLER)
+
+  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+#elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+  #define ULTRA_LCD  //general LCD support, also 16x2
+  #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
+  #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
+
+  #if ENABLED(miniVIKI)
+    #define LCD_CONTRAST_MIN      75
+    #define LCD_CONTRAST_MAX     115
+    #define DEFAULT_LCD_CONTRAST  95
     #define U8GLIB_ST7565_64128N
-
-  #elif ENABLED(ZONESTAR_LCD)
-
-    #define REPRAPWORLD_KEYPAD
-    #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
-    #define ADC_KEYPAD
-    #define ADC_KEY_NUM 8
-    #define ULTIPANEL
-
-    // this helps to implement ADC_KEYPAD menus
-    #define ENCODER_PULSES_PER_STEP 1
-    #define ENCODER_STEPS_PER_MENU_ITEM 1
-    #define ENCODER_FEEDRATE_DEADZONE 2
-    #define REVERSE_MENU_DIRECTION
-
-  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
-
-    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-  #elif ENABLED(BQ_LCD_SMART_CONTROLLER)
-
-    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-
-    #define ULTRA_LCD  //general LCD support, also 16x2
-    #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
-    #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
-
-    #if ENABLED(miniVIKI)
-      #define LCD_CONTRAST_MIN      75
-      #define LCD_CONTRAST_MAX     115
-      #define DEFAULT_LCD_CONTRAST  95
-      #define U8GLIB_ST7565_64128N
-    #elif ENABLED(VIKI2)
-      #define LCD_CONTRAST_MIN       0
-      #define LCD_CONTRAST_MAX     255
-      #define DEFAULT_LCD_CONTRAST 140
-      #define U8GLIB_ST7565_64128N
-    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-      #define LCD_CONTRAST_MIN      90
-      #define LCD_CONTRAST_MAX     130
-      #define DEFAULT_LCD_CONTRAST 110
-      #define U8GLIB_LM6059_AF
-      #define SD_DETECT_INVERTED
-    #endif
-
-  #elif ENABLED(OLED_PANEL_TINYBOY2)
-
-    #define U8GLIB_SSD1306
-    #define ULTIPANEL
-    #define REVERSE_ENCODER_DIRECTION
-    #define REVERSE_MENU_DIRECTION
-
-  #elif ENABLED(RA_CONTROL_PANEL)
-
-    #define LCD_I2C_TYPE_PCA8574
-    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
-    #define ULTIPANEL
-
-  #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
-    #define DOGLCD
-    #define U8GLIB_ST7920
-    #define ULTIPANEL
-
-  #elif ENABLED(CR10_STOCKDISPLAY)
-
-    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-    #ifndef ST7920_DELAY_1
-      #define ST7920_DELAY_1 DELAY_2_NOP
-    #endif
-    #ifndef ST7920_DELAY_2
-      #define ST7920_DELAY_2 DELAY_2_NOP
-    #endif
-    #ifndef ST7920_DELAY_3
-      #define ST7920_DELAY_3 DELAY_2_NOP
-    #endif
-
-  #elif ENABLED(MKS_12864OLED)
-
-    #define REPRAP_DISCOUNT_SMART_CONTROLLER
-    #define U8GLIB_SH1106
-
-  #elif ENABLED(MKS_12864OLED_SSD1306)
-
-    #define REPRAP_DISCOUNT_SMART_CONTROLLER
-    #define U8GLIB_SSD1306
-
-  #elif ENABLED(MKS_MINI_12864)
-
-    #define MINIPANEL
-
+  #elif ENABLED(VIKI2)
+    #define LCD_CONTRAST_MIN       0
+    #define LCD_CONTRAST_MAX     255
+    #define DEFAULT_LCD_CONTRAST 140
+    #define U8GLIB_ST7565_64128N
+  #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+    #define LCD_CONTRAST_MIN      90
+    #define LCD_CONTRAST_MAX     130
+    #define DEFAULT_LCD_CONTRAST 110
+    #define U8GLIB_LM6059_AF
+    #define SD_DETECT_INVERTED
   #endif
 
-  #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
-    #define DOGLCD
-    #define ULTIPANEL
-    #define DEFAULT_LCD_CONTRAST 17
+#elif ENABLED(OLED_PANEL_TINYBOY2)
+
+  #define U8GLIB_SSD1306
+  #define ULTIPANEL
+  #define REVERSE_ENCODER_DIRECTION
+  #define REVERSE_MENU_DIRECTION
+
+#elif ENABLED(RA_CONTROL_PANEL)
+
+  #define LCD_I2C_TYPE_PCA8574
+  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+  #define ULTIPANEL
+
+#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+  #define DOGLCD
+  #define U8GLIB_ST7920
+  #define ULTIPANEL
+
+#elif ENABLED(CR10_STOCKDISPLAY)
+
+  #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+  #ifndef ST7920_DELAY_1
+    #define ST7920_DELAY_1 DELAY_NS(125)
+  #endif
+  #ifndef ST7920_DELAY_2
+    #define ST7920_DELAY_2 DELAY_NS(125)
+  #endif
+  #ifndef ST7920_DELAY_3
+    #define ST7920_DELAY_3 DELAY_NS(125)
   #endif
 
-  // Generic support for SSD1306 / SH1106 OLED based LCDs.
-  #if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SH1106)
-    #define ULTRA_LCD  //general LCD support, also 16x2
-    #define DOGLCD  // Support for I2C LCD 128x64 (Controller SSD1306 / SH1106 graphic Display Family)
+#elif ENABLED(MKS_12864OLED)
+
+  #define REPRAP_DISCOUNT_SMART_CONTROLLER
+  #define U8GLIB_SH1106
+
+#elif ENABLED(MKS_12864OLED_SSD1306)
+
+  #define REPRAP_DISCOUNT_SMART_CONTROLLER
+  #define U8GLIB_SSD1306
+
+#elif ENABLED(MKS_MINI_12864)
+
+  #define MINIPANEL
+
+#endif
+
+#if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
+  #define DOGLCD
+  #define ULTIPANEL
+  #define DEFAULT_LCD_CONTRAST 17
+#endif
+
+#if ENABLED(ULTI_CONTROLLER)
+  #define U8GLIB_SSD1309
+  #define REVERSE_ENCODER_DIRECTION
+  #define LCD_RESET_PIN LCD_PINS_D6 //  This controller need a reset pin
+  #define LCD_CONTRAST_MIN 0
+  #define LCD_CONTRAST_MAX 254
+  #define DEFAULT_LCD_CONTRAST 127
+  #define ENCODER_PULSES_PER_STEP 2
+  #define ENCODER_STEPS_PER_MENU_ITEM 2
+#endif
+
+// Generic support for SSD1306 / SSD1309 / SH1106 OLED based LCDs.
+#if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SSD1309) || ENABLED(U8GLIB_SH1106)
+  #define ULTRA_LCD  //general LCD support, also 16x2
+  #define DOGLCD  // Support for I2C LCD 128x64 (Controller SSD1306 / SSD1309 / SH1106 graphic Display Family)
+#endif
+
+#if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+
+  #define ULTIMAKERCONTROLLER
+
+#elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+
+  #define REPRAP_DISCOUNT_SMART_CONTROLLER
+  #define LCD_WIDTH 16
+  #define LCD_HEIGHT 2
+
+#endif
+
+#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
+  #define DOGLCD
+  #define U8GLIB_ST7920
+  #define REPRAP_DISCOUNT_SMART_CONTROLLER
+#endif
+
+#if ENABLED(ULTIMAKERCONTROLLER)              \
+ || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
+ || ENABLED(G3D_PANEL)                        \
+ || ENABLED(RIGIDBOT_PANEL)                   \
+ || ENABLED(ULTI_CONTROLLER)
+  #define ULTIPANEL
+#endif
+
+#if ENABLED(REPRAPWORLD_KEYPAD)
+  #define NEWPANEL
+  #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
+    #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
+  #endif
+#endif
+
+/**
+ * I2C PANELS
+ */
+
+#if ENABLED(LCD_SAINSMART_I2C_1602) || ENABLED(LCD_SAINSMART_I2C_2004)
+
+  #define LCD_I2C_TYPE_PCF8575
+  #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+  #define ULTRA_LCD
+
+  #if ENABLED(LCD_SAINSMART_I2C_2004)
+    #define LCD_WIDTH 20
+    #define LCD_HEIGHT 4
   #endif
 
-  #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+#elif ENABLED(LCD_I2C_PANELOLU2)
 
-    #define ULTIMAKERCONTROLLER
+  // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
 
-  #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+  #define LCD_I2C_TYPE_MCP23017
+  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (optional)
+  #define ULTIPANEL
 
-    #define REPRAP_DISCOUNT_SMART_CONTROLLER
-    #define LCD_WIDTH 16
-    #define LCD_HEIGHT 2
-
-  #endif
-
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI) || ENABLED(SILVER_GATE_GLCD_CONTROLLER)
-    #define DOGLCD
-    #define U8GLIB_ST7920
-    #define REPRAP_DISCOUNT_SMART_CONTROLLER
-  #endif
-
-  #if ENABLED(ULTIMAKERCONTROLLER)              \
-   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
-   || ENABLED(G3D_PANEL)                        \
-   || ENABLED(RIGIDBOT_PANEL)
-    #define ULTIPANEL
-  #endif
-
-  #if ENABLED(REPRAPWORLD_KEYPAD)
-    #define NEWPANEL
-    #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
-      #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-    #endif
-  #endif
+#elif ENABLED(LCD_I2C_VIKI)
 
   /**
-   * I2C PANELS
+   * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
+   *
+   * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
+   * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
+   * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
+   *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
    */
+  #define LCD_I2C_TYPE_MCP23017
+  #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+  #define LCD_USE_I2C_BUZZER   // Enable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
+  #define ULTIPANEL
 
-  #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
+  #define ENCODER_FEEDRATE_DEADZONE 4
 
-    // Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
-    // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+  #define STD_ENCODER_PULSES_PER_STEP 1
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 2
 
-    #define LCD_I2C_TYPE_PCF8575
-    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
-    #define ULTIPANEL
+#elif ENABLED(G3D_PANEL)
 
-  #elif ENABLED(LCD_I2C_PANELOLU2)
+  #define STD_ENCODER_PULSES_PER_STEP 2
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
 
-    // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
+#elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
+   || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+   || ENABLED(OLED_PANEL_TINYBOY2) \
+   || ENABLED(BQ_LCD_SMART_CONTROLLER) \
+   || ENABLED(LCD_I2C_PANELOLU2) \
+   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+  #define STD_ENCODER_PULSES_PER_STEP 4
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+#endif
 
-    #define LCD_I2C_TYPE_MCP23017
-    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
-    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
-    #define ULTIPANEL
+#ifndef STD_ENCODER_PULSES_PER_STEP
+  #define STD_ENCODER_PULSES_PER_STEP 5
+#endif
+#ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
+  #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+#endif
+#ifndef ENCODER_PULSES_PER_STEP
+  #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
+#endif
+#ifndef ENCODER_STEPS_PER_MENU_ITEM
+  #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
+#endif
+#ifndef ENCODER_FEEDRATE_DEADZONE
+  #define ENCODER_FEEDRATE_DEADZONE 6
+#endif
 
-  #elif ENABLED(LCD_I2C_VIKI)
+// Shift register panels
+// ---------------------
+// 2 wire Non-latching LCD SR from:
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
 
-    /**
-     * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
-     *
-     * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
-     * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
-     * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
-     *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
-     */
-    #define LCD_I2C_TYPE_MCP23017
-    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
-    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
-    #define ULTIPANEL
+#if ENABLED(SAV_3DLCD)
+  #define SR_LCD_2W_NL    // Non latching 2 wire shift register
+  #define ULTIPANEL
+#endif
 
-    #define ENCODER_FEEDRATE_DEADZONE 4
-
-    #define STD_ENCODER_PULSES_PER_STEP 1
-    #define STD_ENCODER_STEPS_PER_MENU_ITEM 2
-
-  #elif ENABLED(G3D_PANEL)
-
-    #define STD_ENCODER_PULSES_PER_STEP 2
-    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
-
-  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
-     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
-     || ENABLED(OLED_PANEL_TINYBOY2) \
-     || ENABLED(BQ_LCD_SMART_CONTROLLER) \
-     || ENABLED(LCD_I2C_PANELOLU2) \
-     || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-    #define STD_ENCODER_PULSES_PER_STEP 4
-    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
-  #endif
-
-  #ifndef STD_ENCODER_PULSES_PER_STEP
-    #define STD_ENCODER_PULSES_PER_STEP 5
-  #endif
-  #ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
-    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
-  #endif
-  #ifndef ENCODER_PULSES_PER_STEP
-    #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
-  #endif
-  #ifndef ENCODER_STEPS_PER_MENU_ITEM
-    #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
-  #endif
-  #ifndef ENCODER_FEEDRATE_DEADZONE
-    #define ENCODER_FEEDRATE_DEADZONE 6
-  #endif
-
-  // Shift register panels
-  // ---------------------
-  // 2 wire Non-latching LCD SR from:
-  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
-
-  #if ENABLED(SAV_3DLCD)
-    #define SR_LCD_2W_NL    // Non latching 2 wire shift register
-    #define ULTIPANEL
-  #endif
-
-  #if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
-    #ifndef LCD_WIDTH
+#if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
+  #ifndef LCD_WIDTH
+    #ifdef LCD_WIDTH_OVERRIDE
+      #define LCD_WIDTH LCD_WIDTH_OVERRIDE
+    #else
       #define LCD_WIDTH 22
     #endif
-    #ifndef LCD_HEIGHT
-      #define LCD_HEIGHT 5
+  #endif
+  #ifndef LCD_HEIGHT
+    #define LCD_HEIGHT 5
+  #endif
+#endif
+
+#if ENABLED(NO_LCD_MENUS)
+  #undef ULTIPANEL
+#endif
+
+#if ENABLED(ULTIPANEL)
+  #define NEWPANEL  // Disable this if you actually have no click-encoder panel
+  #define ULTRA_LCD
+  #ifndef LCD_WIDTH
+    #define LCD_WIDTH 20
+  #endif
+  #ifndef LCD_HEIGHT
+    #define LCD_HEIGHT 4
+  #endif
+#elif ENABLED(ULTRA_LCD)  // no panel but just LCD
+  #ifndef LCD_WIDTH
+    #define LCD_WIDTH 16
+  #endif
+  #ifndef LCD_HEIGHT
+    #define LCD_HEIGHT 2
+  #endif
+#endif
+
+#if ENABLED(DOGLCD)
+  /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
+  // \x00 intentionally skipped to avoid problems in strings
+  #define LCD_STR_REFRESH     "\x01"
+  #define LCD_STR_FOLDER      "\x02"
+  #define LCD_STR_ARROW_RIGHT "\x03"
+  #define LCD_STR_UPLEVEL     "\x04"
+  #define LCD_STR_CLOCK       "\x05"
+  #define LCD_STR_FEEDRATE    "\x06"
+  #define LCD_STR_BEDTEMP     "\x07"
+  #define LCD_STR_THERMOMETER "\x08"
+  #define LCD_STR_DEGREE      "\x09"
+
+  #define LCD_STR_SPECIAL_MAX '\x09'
+  // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
+  // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
+
+  // Symbol characters
+  #define LCD_STR_FILAM_DIA   "\xf8"
+  #define LCD_STR_FILAM_MUL   "\xa4"
+#else
+  // Custom characters defined in the first 8 characters of the LCD
+  #define LCD_BEDTEMP_CHAR     0x00  // Print only as a char. This will have 'unexpected' results when used in a string!
+  #define LCD_DEGREE_CHAR      0x01
+  #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
+  #define LCD_UPLEVEL_CHAR     0x03
+  #define LCD_STR_REFRESH     "\x04"
+  #define LCD_STR_FOLDER      "\x05"
+  #define LCD_FEEDRATE_CHAR    0x06
+  #define LCD_CLOCK_CHAR       0x07
+  #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
+#endif
+
+/**
+ * Default LCD contrast for dogm-like LCD displays
+ */
+#if ENABLED(DOGLCD)
+
+  #define HAS_LCD_CONTRAST ( \
+      ENABLED(MAKRPANEL) \
+   || ENABLED(CARTESIO_UI) \
+   || ENABLED(VIKI2) \
+   || ENABLED(miniVIKI) \
+   || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+  )
+
+  #if HAS_LCD_CONTRAST
+    #ifndef LCD_CONTRAST_MIN
+      #define LCD_CONTRAST_MIN 0
+    #endif
+    #ifndef LCD_CONTRAST_MAX
+      #define LCD_CONTRAST_MAX 63
+    #endif
+    #ifndef DEFAULT_LCD_CONTRAST
+      #define DEFAULT_LCD_CONTRAST 32
     #endif
   #endif
+#endif
 
-  #if ENABLED(ULTIPANEL)
-    #define NEWPANEL  // Disable this if you actually have no click-encoder panel
-    #define ULTRA_LCD
-    #ifndef LCD_WIDTH
-      #define LCD_WIDTH 20
-    #endif
-    #ifndef LCD_HEIGHT
-      #define LCD_HEIGHT 4
-    #endif
-  #elif ENABLED(ULTRA_LCD)  // no panel but just LCD
-    #ifndef LCD_WIDTH
-      #define LCD_WIDTH 16
-    #endif
-    #ifndef LCD_HEIGHT
-      #define LCD_HEIGHT 2
-    #endif
-  #endif
+// Boot screens
+#if DISABLED(ULTRA_LCD)
+  #undef SHOW_BOOTSCREEN
+#elif !defined(BOOTSCREEN_TIMEOUT)
+  #define BOOTSCREEN_TIMEOUT 2500
+#endif
 
-  #if ENABLED(DOGLCD)
-    /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
-    // \x00 intentionally skipped to avoid problems in strings
-    #define LCD_STR_REFRESH     "\x01"
-    #define LCD_STR_FOLDER      "\x02"
-    #define LCD_STR_ARROW_RIGHT "\x03"
-    #define LCD_STR_UPLEVEL     "\x04"
-    #define LCD_STR_CLOCK       "\x05"
-    #define LCD_STR_FEEDRATE    "\x06"
-    #define LCD_STR_BEDTEMP     "\x07"
-    #define LCD_STR_THERMOMETER "\x08"
-    #define LCD_STR_DEGREE      "\x09"
+#define HAS_DEBUG_MENU (ENABLED(ULTIPANEL) && ENABLED(LCD_PROGRESS_BAR_TEST))
 
-    #define LCD_STR_SPECIAL_MAX '\x09'
-    // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
-    // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
-
-    // Symbol characters
-    #define LCD_STR_FILAM_DIA   "\xf8"
-    #define LCD_STR_FILAM_MUL   "\xa4"
+/**
+ * Extruders have some combination of stepper motors and hotends
+ * so we separate these concepts into the defines:
+ *
+ *  EXTRUDERS    - Number of Selectable Tools
+ *  HOTENDS      - Number of hotends, whether connected or separate
+ *  E_STEPPERS   - Number of actual E stepper motors
+ *  E_MANUAL     - Number of E steppers for LCD move options
+ *
+ */
+#if ENABLED(SWITCHING_EXTRUDER)                               // One stepper for every two EXTRUDERS
+  #if EXTRUDERS > 4
+    #define E_STEPPERS    3
+  #elif EXTRUDERS > 2
+    #define E_STEPPERS    2
   #else
-    // Custom characters defined in the first 8 characters of the LCD
-    #define LCD_BEDTEMP_CHAR     0x00  // Print only as a char. This will have 'unexpected' results when used in a string!
-    #define LCD_DEGREE_CHAR      0x01
-    #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
-    #define LCD_UPLEVEL_CHAR     0x03
-    #define LCD_STR_REFRESH     "\x04"
-    #define LCD_STR_FOLDER      "\x05"
-    #define LCD_FEEDRATE_CHAR    0x06
-    #define LCD_CLOCK_CHAR       0x07
-    #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
+    #define E_STEPPERS    1
   #endif
-
-  /**
-   * Default LCD contrast for dogm-like LCD displays
-   */
-  #if ENABLED(DOGLCD)
-
-    #define HAS_LCD_CONTRAST ( \
-        ENABLED(MAKRPANEL) \
-     || ENABLED(CARTESIO_UI) \
-     || ENABLED(VIKI2) \
-     || ENABLED(miniVIKI) \
-     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
-    )
-
-    #if HAS_LCD_CONTRAST
-      #ifndef LCD_CONTRAST_MIN
-        #define LCD_CONTRAST_MIN 0
-      #endif
-      #ifndef LCD_CONTRAST_MAX
-        #define LCD_CONTRAST_MAX 63
-      #endif
-      #ifndef DEFAULT_LCD_CONTRAST
-        #define DEFAULT_LCD_CONTRAST 32
-      #endif
-    #endif
+  #if DISABLED(SWITCHING_NOZZLE)
+    #define HOTENDS       E_STEPPERS
   #endif
+  #define E_MANUAL        EXTRUDERS
+#elif ENABLED(MIXING_EXTRUDER)
+  #define E_STEPPERS      MIXING_STEPPERS
+  #define E_MANUAL        1
+#else
+  #define E_STEPPERS      EXTRUDERS
+  #define E_MANUAL        EXTRUDERS
+#endif
 
-  // Boot screens
-  #if DISABLED(ULTRA_LCD)
-    #undef SHOW_BOOTSCREEN
-  #elif !defined(BOOTSCREEN_TIMEOUT)
-    #define BOOTSCREEN_TIMEOUT 2500
-  #endif
+// No inactive extruders with MK2_MULTIPLEXER or SWITCHING_NOZZLE
+#if ENABLED(MK2_MULTIPLEXER) || ENABLED(SWITCHING_NOZZLE)
+  #undef DISABLE_INACTIVE_EXTRUDER
+#endif
 
-  #define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)
+// MK2 Multiplexer forces SINGLENOZZLE
+#if ENABLED(MK2_MULTIPLEXER)
+  #define SINGLENOZZLE
+#endif
 
-  // MK2 Multiplexer forces SINGLENOZZLE to be enabled
-  #if ENABLED(MK2_MULTIPLEXER)
-    #define SINGLENOZZLE
-  #endif
+#if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
+  #undef HOTENDS
+  #define HOTENDS       1
+  #undef TEMP_SENSOR_1_AS_REDUNDANT
+  #undef HOTEND_OFFSET_X
+  #undef HOTEND_OFFSET_Y
+#endif
 
-  /**
-   * Extruders have some combination of stepper motors and hotends
-   * so we separate these concepts into the defines:
-   *
-   *  EXTRUDERS    - Number of Selectable Tools
-   *  HOTENDS      - Number of hotends, whether connected or separate
-   *  E_STEPPERS   - Number of actual E stepper motors
-   *  E_MANUAL     - Number of E steppers for LCD move options
-   *  TOOL_E_INDEX - Index to use when getting/setting the tool state
-   *
-   */
-  #if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
-    #define HOTENDS       1
-    #undef TEMP_SENSOR_1_AS_REDUNDANT
-    #undef HOTEND_OFFSET_X
-    #undef HOTEND_OFFSET_Y
-  #else                                                         // Two hotends
-    #define HOTENDS       EXTRUDERS
-    #if ENABLED(SWITCHING_NOZZLE) && !defined(HOTEND_OFFSET_Z)
-      #define HOTEND_OFFSET_Z { 0 }
-    #endif
-  #endif
+#ifndef HOTENDS
+  #define HOTENDS EXTRUDERS
+#endif
 
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(MIXING_EXTRUDER)   // Unified E axis
-    #if ENABLED(MIXING_EXTRUDER)
-      #define E_STEPPERS  MIXING_STEPPERS
-    #else
-      #define E_STEPPERS  1                                     // One E stepper
-    #endif
-    #define E_MANUAL      1
-    #define TOOL_E_INDEX  0
+#define DO_SWITCH_EXTRUDER (ENABLED(SWITCHING_EXTRUDER) && (DISABLED(SWITCHING_NOZZLE) || SWITCHING_EXTRUDER_SERVO_NR != SWITCHING_NOZZLE_SERVO_NR))
+
+/**
+ * DISTINCT_E_FACTORS affects how some E factors are accessed
+ */
+#if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
+  #define XYZE_N (XYZ + E_STEPPERS)
+  #if ENABLED(HANGPRINTER)
+    #define NUM_AXIS_N (ABCD + E_STEPPERS)
   #else
-    #define E_STEPPERS    EXTRUDERS
-    #define E_MANUAL      EXTRUDERS
-    #define TOOL_E_INDEX  current_block->active_extruder
+    #define NUM_AXIS_N (XYZ + E_STEPPERS)
   #endif
-
-  /**
-   * DISTINCT_E_FACTORS affects how some E factors are accessed
-   */
-  #if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
-    #define XYZE_N (XYZ + E_STEPPERS)
-    #define E_AXIS_N (E_AXIS + extruder)
+  #define E_AXIS_N (E_AXIS + extruder)
+#else
+  #undef DISTINCT_E_FACTORS
+  #define XYZE_N XYZE
+  #if ENABLED(HANGPRINTER)
+    #define NUM_AXIS_N ABCDE
   #else
-    #undef DISTINCT_E_FACTORS
-    #define XYZE_N XYZE
-    #define E_AXIS_N E_AXIS
+    #define NUM_AXIS_N XYZE
   #endif
+  #define E_AXIS_N E_AXIS
+#endif
 
-  /**
-   * The BLTouch Probe emulates a servo probe
-   * and uses "special" angles for its state.
-   */
-  #if ENABLED(BLTOUCH)
-    #ifndef Z_ENDSTOP_SERVO_NR
-      #define Z_ENDSTOP_SERVO_NR 0
-    #endif
-    #ifndef NUM_SERVOS
-      #define NUM_SERVOS (Z_ENDSTOP_SERVO_NR + 1)
-    #endif
-    #undef DEACTIVATE_SERVOS_AFTER_MOVE
-    #if NUM_SERVOS == 1
-      #undef SERVO_DELAY
-      #define SERVO_DELAY { 50 }
-    #endif
-    #ifndef BLTOUCH_DELAY
-      #define BLTOUCH_DELAY 375
-    #endif
-    #undef Z_SERVO_ANGLES
-    #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
-
-    #define BLTOUCH_DEPLOY    10
-    #define BLTOUCH_STOW      90
-    #define BLTOUCH_SELFTEST 120
-    #define BLTOUCH_RESET    160
-    #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
-
-    // Always disable probe pin inverting for BLTouch
-    #undef Z_MIN_PROBE_ENDSTOP_INVERTING
-    #define Z_MIN_PROBE_ENDSTOP_INVERTING false
-
-    #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-      #undef Z_MIN_ENDSTOP_INVERTING
-      #define Z_MIN_ENDSTOP_INVERTING false
-      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
-    #else
-      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
-    #endif
+/**
+ * The BLTouch Probe emulates a servo probe
+ * and uses "special" angles for its state.
+ */
+#if ENABLED(BLTOUCH)
+  #ifndef Z_PROBE_SERVO_NR
+    #define Z_PROBE_SERVO_NR 0
   #endif
-
-  /**
-   * Set a flag for a servo probe
-   */
-  #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
-
-  /**
-   * Set a flag for any enabled probe
-   */
-  #define PROBE_SELECTED (ENABLED(PROBE_MANUALLY) || ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
-
-  /**
-   * Clear probe pin settings when no probe is selected
-   */
-  #if !PROBE_SELECTED || ENABLED(PROBE_MANUALLY)
-    #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
-    #undef Z_MIN_PROBE_ENDSTOP
+  #ifndef NUM_SERVOS
+    #define NUM_SERVOS (Z_PROBE_SERVO_NR + 1)
   #endif
+  #undef DEACTIVATE_SERVOS_AFTER_MOVE
+  #if NUM_SERVOS == 1
+    #undef SERVO_DELAY
+    #define SERVO_DELAY { 50 }
+  #endif
+  #ifndef BLTOUCH_DELAY
+    #define BLTOUCH_DELAY 375
+  #endif
+  #undef Z_SERVO_ANGLES
+  #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
 
-  #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
-  #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
-  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))
+  #define BLTOUCH_DEPLOY    10
+  #define BLTOUCH_STOW      90
+  #define BLTOUCH_SELFTEST 120
+  #define BLTOUCH_RESET    160
+  #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
+
+  // Always disable probe pin inverting for BLTouch
+  #undef Z_MIN_PROBE_ENDSTOP_INVERTING
+  #define Z_MIN_PROBE_ENDSTOP_INVERTING false
+
+  #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+    #undef Z_MIN_ENDSTOP_INVERTING
+    #define Z_MIN_ENDSTOP_INVERTING Z_MIN_PROBE_ENDSTOP_INVERTING
+    #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
+  #else
+    #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
+  #endif
+#endif
+
+/**
+ * Set a flag for a servo probe
+ */
+#define HAS_Z_SERVO_PROBE (defined(Z_PROBE_SERVO_NR) && Z_PROBE_SERVO_NR >= 0)
+
+/**
+ * Set flags for enabled probes
+ */
+#define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
+#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING))
+
+#if !HAS_BED_PROBE
+  // Clear probe pin settings when no probe is selected
+  #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+  #undef Z_MIN_PROBE_ENDSTOP
+#elif ENABLED(Z_PROBE_ALLEN_KEY)
+  // Extra test for Allen Key Probe
+  #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
+#endif
+
+#define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))
+
+#define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
+#define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
+#define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))
+
+#define USE_MARLINSERIAL !(defined(__AVR__) && defined(USBCON))
 
 #endif // CONDITIONALS_LCD_H

Marlin/Configuration.h

@@ -20,6 +20,19 @@
  *
  */
 
+//#define X_2208
+//#define Y_2208
+
+//#define BedAC
+
+//#define tallVersion
+
+/*
+ * Enables a filament sensor plugged into the laser pin. Disables the laser
+ */
+//#define FilamentSensor
+//#define ledgeFilSensor //Modify filament sensor contact type for TM3D V2 sensors
+
 /**
  * Configuration.h
  *
@@ -37,7 +50,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -74,27 +87,34 @@
 // User-specified version info of this build to display in [Pronterface, etc] terminal window during
 // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
 // build by the user have been successfully uploaded into firmware.
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "TinyMachines3D" // Who made the changes.
 #define SHOW_BOOTSCREEN
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
-//#define SHOW_CUSTOM_BOOTSCREEN
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respecfully request that you retain the unmodified Marlin boot screen.
+ */
+
+
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
+#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -111,7 +131,7 @@
  *
  * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
  */
-#define BAUDRATE 250000
+#define BAUDRATE 115200
 
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
@@ -119,12 +139,12 @@
 // The following define selects which electronics board you have.
 // Please choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_RAMPS_14_EFB
+  #define MOTHERBOARD BOARD_RUMBA
 #endif
 
 // Optional custom name for your RepStrap or other custom machine
 // Displayed in the LCD "Ready" message
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "TM3D T-REX 2+"
 
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
@@ -134,10 +154,10 @@
 
 // This defines the number of extruders
 // :[1, 2, 3, 4, 5]
-#define EXTRUDERS 1
+#define EXTRUDERS 2
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
-#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
 
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
@@ -232,6 +252,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -245,6 +274,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -253,7 +283,7 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -263,6 +293,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -284,14 +315,18 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 1
-#define TEMP_SENSOR_1 0
+#define TEMP_SENSOR_1 1
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
-#define TEMP_SENSOR_BED 0
+#if(ENABLED(BedAC))
+  #define TEMP_SENSOR_BED 11
+#else
+  #define TEMP_SENSOR_BED 0
+#endif
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -325,7 +360,7 @@
 // When temperature exceeds max temp, your heater will be switched off.
 // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
 // You should use MINTEMP for thermistor short/failure protection.
-#define HEATER_0_MAXTEMP 275
+#define HEATER_0_MAXTEMP 410
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -341,9 +376,9 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
-  //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
+  #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
   //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
   //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
@@ -355,19 +390,19 @@
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
   // Ultimaker
-  #define  DEFAULT_Kp 22.2
-  #define  DEFAULT_Ki 1.08
-  #define  DEFAULT_Kd 114
+  #define DEFAULT_Kp 22.2
+  #define DEFAULT_Ki 1.08
+  #define DEFAULT_Kd 114
 
   // MakerGear
-  //#define  DEFAULT_Kp 7.0
-  //#define  DEFAULT_Ki 0.1
-  //#define  DEFAULT_Kd 12
+  //#define DEFAULT_Kp 7.0
+  //#define DEFAULT_Ki 0.1
+  //#define DEFAULT_Kd 12
 
   // Mendel Parts V9 on 12V
-  //#define  DEFAULT_Kp 63.0
-  //#define  DEFAULT_Ki 2.25
-  //#define  DEFAULT_Kd 440
+  //#define DEFAULT_Kp 63.0
+  //#define DEFAULT_Ki 2.25
+  //#define DEFAULT_Kd 440
 
 #endif // PIDTEMP
 
@@ -383,7 +418,7 @@
 // If your configuration is significantly different than this and you don't understand the issues involved, you probably
 // shouldn't use bed PID until someone else verifies your hardware works.
 // If this is enabled, find your own PID constants below.
-//#define PIDTEMPBED
+#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
@@ -399,15 +434,15 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define  DEFAULT_bedKp 10.00
-  #define  DEFAULT_bedKi .023
-  #define  DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
@@ -471,17 +506,16 @@
 // Almost all printers will be using one per axis. Probes will use one or more of the
 // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
 #define USE_XMIN_PLUG
-#define USE_YMIN_PLUG
+//#define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
-//#define USE_XMAX_PLUG
-//#define USE_YMAX_PLUG
+#define USE_XMAX_PLUG
+#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -493,11 +527,11 @@
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
 #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
@@ -529,14 +563,21 @@
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 4000, 500 }
+
+
+ #if(ENABLED(Y_2208))
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 1600, 93 }
+#else
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 160, 1600, 93 }
+#endif
+
 
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE          { 250, 150, 5, 25 }
 
 /**
  * Default Max Acceleration (change/s) change = mm/s
@@ -544,7 +585,7 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 1500, 500, 400, 4000 }
 
 /**
  * Default Acceleration (change/s) change = mm/s
@@ -567,10 +608,21 @@
  * value set here, it may happen instantaneously.
  */
 #define DEFAULT_XJERK                 20.0
-#define DEFAULT_YJERK                 20.0
+#define DEFAULT_YJERK                 10.0
 #define DEFAULT_ZJERK                  0.4
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * Realtime Jerk Control
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ * Because this is computationally-intensive, a 32-bit MCU is required.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define BEZIER_JERK_CONTROL
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -637,7 +689,7 @@
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-//#define BLTOUCH
+#define BLTOUCH
 #if ENABLED(BLTOUCH)
   //#define BLTOUCH_DELAY 375   // (ms) Enable and increase if needed
 #endif
@@ -649,7 +701,11 @@
  * These options are most useful for the BLTouch probe, but may also improve
  * readings with inductive probes and piezo sensors.
  */
+
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -683,23 +739,26 @@
  *      O-- FRONT --+
  *    (0,0)
  */
-#define X_PROBE_OFFSET_FROM_EXTRUDER 10  // X offset: -left  +right  [of the nozzle]
-#define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
-#define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
+#define X_PROBE_OFFSET_FROM_EXTRUDER -7  // X offset: -left  +right  [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 29  // Y offset: -front +behind [the nozzle]
+#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5   // Z offset: -below +above  [the nozzle]
+
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
 
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
 //   Set to 2 for a fast/slow probe, using the second probe result.
 //   Set to 3 or more for slow probes, averaging the results.
-//#define MULTIPLE_PROBING 2
+#define MULTIPLE_PROBING 2
 
 /**
  * Z probes require clearance when deploying, stowing, and moving between
@@ -715,15 +774,16 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE   5 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
-
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+#define Z_PROBE_LOW_POINT          -3 // Farthest distance below the trigger-point to go before stopping
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
 #define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
-//#define Z_MIN_PROBE_REPEATABILITY_TEST
+#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
@@ -748,10 +808,17 @@
 // @section machine
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+#if(ENABLED(X_2208))
+#define INVERT_X_DIR true
+#else
 #define INVERT_X_DIR false
+#endif
+ #if(ENABLED(Y_2208))
 #define INVERT_Y_DIR true
-#define INVERT_Z_DIR false
-
+#else
+#define INVERT_Y_DIR false
+#endif
+#define INVERT_Z_DIR true
 // Enable this option for Toshiba stepper drivers
 //#define CONFIG_STEPPERS_TOSHIBA
 
@@ -759,7 +826,7 @@
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
 #define INVERT_E0_DIR false
-#define INVERT_E1_DIR false
+#define INVERT_E1_DIR true
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
 #define INVERT_E4_DIR false
@@ -768,29 +835,35 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
-//#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
+#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
 #define X_HOME_DIR -1
-#define Y_HOME_DIR -1
+#define Y_HOME_DIR 1
 #define Z_HOME_DIR -1
 
 // @section machine
 
 // The size of the print bed
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 400
+#define Y_BED_SIZE 400
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS 0
+#define X_MIN_POS -42
 #define Y_MIN_POS 0
 #define Z_MIN_POS 0
-#define X_MAX_POS X_BED_SIZE
+#define X_MAX_POS 450
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
 
+#if(ENABLED(tallVersion))
+  #define Z_MAX_POS 700
+#else
+  #define Z_MAX_POS 500
+#endif
 /**
  * Software Endstops
  *
@@ -800,7 +873,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -808,7 +881,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -817,17 +890,25 @@
 #endif
 
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
-//#define FILAMENT_RUNOUT_SENSOR
+ #if(ENABLED(FilamentSensor))
+  #define FILAMENT_RUNOUT_SENSOR
+#endif
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+  #if ENABLED(ledgeFilSensor)
+    #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
+  #else
+    #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor.
+  #endif
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
+  #define FIL_RUNOUT_PIN 4
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -872,9 +953,15 @@
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
 //#define AUTO_BED_LEVELING_BILINEAR
-//#define AUTO_BED_LEVELING_UBL
+#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -897,12 +984,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  #define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  #define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -914,13 +1001,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -943,46 +1027,31 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
   //========================= Unified Bed Leveling ============================
   //===========================================================================
 
-  //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
+  #define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
-  #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
+  #define MESH_INSET 30              // Set Mesh bounds as an inset region of the bed
+  #define GRID_MAX_POINTS_X 15      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -991,24 +1060,42 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  #define PROBE_PT_1_X 30
+  #define PROBE_PT_1_Y 365
+  #define PROBE_PT_2_X 30
+  #define PROBE_PT_2_Y 30
+  #define PROBE_PT_3_X 365
+  #define PROBE_PT_3_Y 30
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
-  #define MBL_Z_STEP 0.025    // Step size while manually probing Z axis.
+  #define MBL_Z_STEP 0.01    // Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
-//#define LEVEL_BED_CORNERS
+#define LEVEL_BED_CORNERS
+
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
 
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
  */
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+#define Z_PROBE_END_SCRIPT "M280 P0 S90"
 
 
 // @section homing
@@ -1030,16 +1117,15 @@
 // - If stepper drivers time out, it will need X and Y homing again before Z homing.
 // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
 // - Prevent Z homing when the Z probe is outside bed area.
-//
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
 
 #if ENABLED(Z_SAFE_HOMING)
-  #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2)    // X point for Z homing when homing all axes (G28).
-  #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2)    // Y point for Z homing when homing all axes (G28).
+  #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2)    // X point for Z homing when homing all axis (G28).
+  #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2)    // Y point for Z homing when homing all axis (G28).
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_XY (80*60)
 #define HOMING_FEEDRATE_Z  (4*60)
 
 // @section calibrate
@@ -1113,7 +1199,7 @@
 // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
 // M502 - reverts to the default "factory settings".  You still need to store them in EEPROM afterwards if you want to.
 //
-//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
+#define EEPROM_SETTINGS // Enable for M500 and M501 commands
 //#define DISABLE_M503    // Saves ~2700 bytes of PROGMEM. Disable for release!
 #define EEPROM_CHITCHAT   // Give feedback on EEPROM commands. Disable to save PROGMEM.
 
@@ -1145,16 +1231,16 @@
 // @section temperature
 
 // Preheat Constants
-#define PREHEAT_1_TEMP_HOTEND 180
+#define PREHEAT_1_TEMP_HOTEND 190
 #define PREHEAT_1_TEMP_BED     70
-#define PREHEAT_1_FAN_SPEED     0 // Value from 0 to 255
+#define PREHEAT_1_FAN_SPEED     125 // Value from 0 to 255
 
-#define PREHEAT_2_TEMP_HOTEND 240
+#define PREHEAT_2_TEMP_HOTEND 220
 #define PREHEAT_2_TEMP_BED    110
-#define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
+#define PREHEAT_2_FAN_SPEED     125 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1164,11 +1250,13 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_POINT { 150, (Y_MIN_POS + 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1275,11 +1363,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8,
+ *    gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
  *    tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1327,7 +1415,7 @@
  * you must uncomment the following option or it won't work.
  *
  */
-//#define SDSUPPORT
+#define SDSUPPORT
 
 /**
  * SD CARD: SPI SPEED
@@ -1346,19 +1434,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1390,7 +1487,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-//#define INDIVIDUAL_AXIS_HOMING_MENU
+#define INDIVIDUAL_AXIS_HOMING_MENU
 
 //
 // SPEAKER/BUZZER
@@ -1407,8 +1504,8 @@
 // Note: Test audio output with the G-Code:
 //  M300 S<frequency Hz> P<duration ms>
 //
-//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-//#define LCD_FEEDBACK_FREQUENCY_HZ 1000
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
 //
 // CONTROLLER TYPE: Standard
@@ -1479,7 +1576,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 
 //
 // MakerLab Mini Panel with graphic
@@ -1532,6 +1629,12 @@
 //
 //#define LCD_FOR_MELZI
 
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
 //
 // CONTROLLER TYPE: I2C
 //
@@ -1546,12 +1649,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1590,6 +1694,12 @@
   #define U8GLIB_SH1106
 #endif
 
+//
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
+//
+//#define ULTI_CONTROLLER
+
 //
 // CONTROLLER TYPE: Shift register panels
 //
@@ -1625,15 +1735,15 @@
 //#define CR10_STOCKDISPLAY
 
 //
-// MKS OLED 1.3" 128x64 FULL GRAPHICS CONTROLLER
+// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
 //
 // Tiny, but very sharp OLED display
-// If there is a pixel shift, try the other controller.
 //
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //

Marlin/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -123,7 +134,7 @@
 #endif
 
 // Show extra position information in M114
-//#define M114_DETAIL
+#define M114_DETAIL
 
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -193,7 +206,7 @@
 // When first starting the main fan, run it at full speed for the
 // given number of milliseconds.  This gets the fan spinning reliably
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+#define FAN_KICKSTART_TIME 100
 
 // This defines the minimal speed for the main fan, run in PWM mode
 // to enable uncomment and set minimal PWM speed for reliable running (1-255)
@@ -236,13 +249,17 @@
 /**
  * M355 Case Light on-off / brightness
  */
-//#define CASE_LIGHT_ENABLE
+#define CASE_LIGHT_ENABLE
 #if ENABLED(CASE_LIGHT_ENABLE)
-  //#define CASE_LIGHT_PIN 4                  // Override the default pin if needed
+  #define CASE_LIGHT_PIN 8                  // Override the default pin if needed
   #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
-  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
-  //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255   // Set default power-up brightness (0-255, requires PWM pin)
+  #define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -307,13 +324,13 @@
 // A dual x-carriage design has the advantage that the inactive extruder can be parked which
 // prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage
 // allowing faster printing speeds. Connect your X2 stepper to the first unused E plug.
-//#define DUAL_X_CARRIAGE
+#define DUAL_X_CARRIAGE
 #if ENABLED(DUAL_X_CARRIAGE)
   // Configuration for second X-carriage
   // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop;
   // the second x-carriage always homes to the maximum endstop.
-  #define X2_MIN_POS 80     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
-  #define X2_MAX_POS 353    // set maximum to the distance between toolheads when both heads are homed
+  #define X2_MIN_POS 0     // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
+  #define X2_MAX_POS 442    // set maximum to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR 1     // the second X-carriage always homes to the maximum endstop position
   #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
       // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
@@ -331,14 +348,14 @@
   //                                    once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
 
   // This is the default power-up mode which can be later using M605.
-  #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
+  #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
 
   // Default settings in "Auto-park Mode"
   #define TOOLCHANGE_PARK_ZLIFT   0.2      // the distance to raise Z axis when parking an extruder
   #define TOOLCHANGE_UNPARK_ZLIFT 1        // the distance to raise Z axis when unparking an extruder
 
   // Default x offset in duplication mode (typically set to half print bed width)
-  #define DEFAULT_DUPLICATION_X_OFFSET 100
+  #define DEFAULT_DUPLICATION_X_OFFSET 200
 
 #endif // DUAL_X_CARRIAGE
 
@@ -353,11 +370,14 @@
 #define Y_HOME_BUMP_MM 5
 #define Z_HOME_BUMP_MM 2
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
-//#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
+#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
 
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,6 +430,15 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_FACTOR 0.02
+  //#define JUNCTION_DEVIATION_INCLUDE_E
+#endif
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
 #define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
 
@@ -454,7 +483,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -471,16 +501,30 @@
 // @section lcd
 
 // Include a page of printer information in the LCD Main Menu
-//#define LCD_INFO_MENU
+#define LCD_INFO_MENU
 
 // Scroll a longer status message into view
-//#define STATUS_MESSAGE_SCROLLING
+#define STATUS_MESSAGE_SCROLLING
 
 // On the Info Screen, display XY with one decimal place when possible
-//#define LCD_DECIMAL_SMALL_XY
+#define LCD_DECIMAL_SMALL_XY
 
 // The timeout (in ms) to return to the status screen from sub-menus
-//#define LCD_TIMEOUT_TO_STATUS 15000
+#define LCD_TIMEOUT_TO_STATUS 15000
+
+// Add an 'M73' G-code to set the current percentage
+#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 
 /**
  * LED Control Menu
@@ -518,6 +562,16 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -545,9 +599,9 @@
 
   // SD Card Sorting options
   #if ENABLED(SDCARD_SORT_ALPHA)
-    #define SDSORT_LIMIT       40     // Maximum number of sorted items (10-256). Costs 27 bytes each.
+    #define SDSORT_LIMIT       30     // Maximum number of sorted items (10-256). Costs 27 bytes each.
     #define FOLDER_SORTING     -1     // -1=above  0=none  1=below
-    #define SDSORT_GCODE       false  // Allow turning sorting on/off with LCD and M34 g-code.
+    #define SDSORT_GCODE       true  // Allow turning sorting on/off with LCD and M34 g-code.
     #define SDSORT_USES_RAM    false  // Pre-allocate a static array for faster pre-sorting.
     #define SDSORT_USES_STACK  false  // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
     #define SDSORT_CACHE_NAMES false  // Keep sorted items in RAM longer for speedy performance. Most expensive option.
@@ -556,30 +610,11 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  #define LONG_FILENAME_HOST_SUPPORT
 
   // Enable this option to scroll long filenames in the SD card menu
-  //#define SCROLL_LONG_FILENAMES
+  #define SCROLL_LONG_FILENAMES
 
   /**
    * This option allows you to abort SD printing when any endstop is triggered.
@@ -595,6 +630,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  #define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +650,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -618,7 +661,7 @@
 
   // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
-  //#define USE_BIG_EDIT_FONT
+  #define USE_BIG_EDIT_FONT
 
   // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
@@ -631,6 +674,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -655,74 +717,50 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
-  //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+  #define BABYSTEP_MULTIPLICATOR 40   // Babysteps are very small. Increase for faster motion.
+  #define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping
+  #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
   #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
                                         // Note: Extra time may be added to mitigate controller latency.
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
+  #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
 #endif
 
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
-//#define LIN_ADVANCE
-
+#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.07  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
-  //#define MESH_MIN_X MESH_INSET
-  //#define MESH_MIN_Y MESH_INSET
-  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
-  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+  //#define MESH_MIN_X 50
+  //#define MESH_MIN_Y 0
+  //#define MESH_MAX_X X_BED_SIZE - (50)
+  //#define MESH_MAX_Y Y_BED_SIZE - (0)
 #endif
 
 // @section extras
@@ -753,7 +791,8 @@
 
 // The minimum pulse width (in µs) for stepping a stepper.
 // Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers
+#define MINIMUM_STEPPER_PULSE 2
 
 // @section temperature
 
@@ -815,7 +854,7 @@
 // enter the serial receive buffer, so they cannot be blocked.
 // Currently handles M108, M112, M410
 // Does not work on boards using AT90USB (USBCON) processors!
-//#define EMERGENCY_PARSER
+#define EMERGENCY_PARSER
 
 // Bad Serial-connections can miss a received command by sending an 'ok'
 // Therefore some clients abort after 30 seconds in a timeout.
@@ -824,7 +863,7 @@
 //#define NO_TIMEOUTS 1000 // Milliseconds
 
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
-//#define ADVANCED_OK
+#define ADVANCED_OK
 
 // @section extras
 
@@ -843,7 +882,7 @@
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  *
  */
-//#define FWRETRACT  // ONLY PARTIALLY TESTED
+#define FWRETRACT  // ONLY PARTIALLY TESTED
 #if ENABLED(FWRETRACT)
   #define MIN_AUTORETRACT 0.1             // When auto-retract is on, convert E moves of this length and over
   #define MAX_AUTORETRACT 10.0            // Upper limit for auto-retract conversion
@@ -864,7 +903,7 @@
  *   'M106 P<fan> T2'     : Use the set secondary speed
  *   'M106 P<fan> T1'     : Restore the previous fan speed
  */
-//#define EXTRA_FAN_SPEED
+#define EXTRA_FAN_SPEED
 
 /**
  * Advanced Pause
@@ -873,38 +912,48 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     41  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      50  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE  30  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   50  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         20  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH       4  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         0  // (mm) An unretract is done, then this length is purged.
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS          3  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
@@ -914,21 +963,19 @@
  * You will need to import the TMC26XStepper library into the Arduino IDE for this
  * (https://github.com/trinamic/TMC26XStepper.git)
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+//#define HAVE_TMC26X
+#if ENABLED(HAVE_TMC26X)  // Choose your axes here. This is mandatory!
+  //#define X_IS_TMC26X
+  //#define X2_IS_TMC26X
+  //#define Y_IS_TMC26X
+  //#define Y2_IS_TMC26X
+  //#define Z_IS_TMC26X
+  //#define Z2_IS_TMC26X
+  //#define E0_IS_TMC26X
+  //#define E1_IS_TMC26X
+  //#define E2_IS_TMC26X
+  //#define E3_IS_TMC26X
+  //#define E4_IS_TMC26X
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,7 +1023,7 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
  * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
@@ -984,27 +1031,13 @@
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
  * the hardware SPI interface on your board and define the required CS pins
  * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  */
 //#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
- * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
- * The drivers can also be used with hardware serial.
- *
- * You'll also need the TMC2208Stepper Arduino library
- * (https://github.com/teemuatlut/TMC2208Stepper).
- */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
+#if ENABLED(HAVE_TMC2130)  // Choose your axes here. This is mandatory!
   //#define X_IS_TMC2130
   //#define X2_IS_TMC2130
   //#define Y_IS_TMC2130
@@ -1016,7 +1049,20 @@
   //#define E2_IS_TMC2130
   //#define E3_IS_TMC2130
   //#define E4_IS_TMC2130
+#endif
 
+/**
+ * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
+ * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ * To use the reading capabilities, also connect #_SERIAL_RX_PIN
+ * to PDN_UART without a resistor.
+ * The drivers can also be used with hardware serial.
+ *
+ * You'll also need the TMC2208Stepper Arduino library
+ * (https://github.com/teemuatlut/TMC2208Stepper).
+ */
+//#define HAVE_TMC2208
+#if ENABLED(HAVE_TMC2208)  // Choose your axes here. This is mandatory!
   //#define X_IS_TMC2208
   //#define X2_IS_TMC2208
   //#define Y_IS_TMC2208
@@ -1028,10 +1074,9 @@
   //#define E2_IS_TMC2208
   //#define E3_IS_TMC2208
   //#define E4_IS_TMC2208
+#endif
 
-  /**
-   * Stepper driver settings
-   */
+#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1115,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1173,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1196,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,7 +1224,7 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
@@ -1180,57 +1252,46 @@
   //#define E4_IS_L6470
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1288,13 +1349,13 @@
  */
 //#define SPINDLE_LASER_ENABLE
 #if ENABLED(SPINDLE_LASER_ENABLE)
-
+#define SPINDLE_LASER_ENABLE_PIN 0
   #define SPINDLE_LASER_ENABLE_INVERT   false  // set to "true" if the on/off function is reversed
-  #define SPINDLE_LASER_PWM             true   // set to true if your controller supports setting the speed/power
-  #define SPINDLE_LASER_PWM_INVERT      true   // set to "true" if the speed/power goes up when you want it to go slower
-  #define SPINDLE_LASER_POWERUP_DELAY   5000   // delay in milliseconds to allow the spindle/laser to come up to speed/power
-  #define SPINDLE_LASER_POWERDOWN_DELAY 5000   // delay in milliseconds to allow the spindle to stop
-  #define SPINDLE_DIR_CHANGE            true   // set to true if your spindle controller supports changing spindle direction
+  #define SPINDLE_LASER_PWM             false   // set to true if your controller supports setting the speed/power
+  #define SPINDLE_LASER_PWM_INVERT      false   // set to "true" if the speed/power goes up when you want it to go slower
+  #define SPINDLE_LASER_POWERUP_DELAY   5   // delay in milliseconds to allow the spindle/laser to come up to speed/power
+  #define SPINDLE_LASER_POWERDOWN_DELAY 5   // delay in milliseconds to allow the spindle to stop
+  #define SPINDLE_DIR_CHANGE            false   // set to true if your spindle controller supports changing spindle direction
   #define SPINDLE_INVERT_DIR            false
   #define SPINDLE_STOP_ON_DIR_CHANGE    true   // set to true if Marlin should stop the spindle before changing rotation direction
 
@@ -1318,6 +1379,15 @@
   //#define SPEED_POWER_MAX      100      // 0-100%
 #endif
 
+#if(!ENABLED(FilamentSensor))
+  #define FAN_AS_LASER
+#endif
+#if ENABLED(FAN_AS_LASER)
+  #define FAN_NUM_AS_LASER 1
+  #define LASER_PIN_DEDICATED true
+  #else
+  #define FAN_NUM_AS_LASER -1
+#endif
 /**
  * Filament Width Sensor
  *
@@ -1416,26 +1486,26 @@
 /**
  * User-defined menu items that execute custom GCode
  */
-//#define CUSTOM_USER_MENUS
+ #define CUSTOM_USER_MENUS
 #if ENABLED(CUSTOM_USER_MENUS)
-  #define USER_SCRIPT_DONE "M117 User Script Done"
+  //#define USER_SCRIPT_DONE "M117 User Script Done"
   #define USER_SCRIPT_AUDIBLE_FEEDBACK
-  //#define USER_SCRIPT_RETURN  // Return to status screen after a script
+  #define USER_SCRIPT_RETURN  // Return to status screen after a script
 
-  #define USER_DESC_1 "Home & UBL Info"
-  #define USER_GCODE_1 "G28\nG29 W"
+  #define USER_DESC_1 "UBL Commission Step 1"
+  #define USER_GCODE_1 "M502 \n M500 \n M501 \n T0 \n M190 S75 \n M106 S128 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
+ 
+  #define USER_DESC_2 "UBL Commission Step 2"
+  #define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n T0 \n M106 S128 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
 
-  #define USER_DESC_2 "Preheat for PLA"
-  #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+  #define USER_DESC_3 "Prep for Z Adjust"
+  #define USER_GCODE_3 "M190 75 \n T0 \n M106 S128 \n M104 225 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n"
 
-  #define USER_DESC_3 "Preheat for ABS"
-  #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+   #define USER_DESC_4 "Fill Mesh Points"
+  #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n"
 
-  #define USER_DESC_4 "Heat Bed/Home/Level"
-  #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
-
-  #define USER_DESC_5 "Home & Info"
-  #define USER_GCODE_5 "G28\nM503"
+   #define USER_DESC_5 "Run Mesh Validation"
+  #define USER_GCODE_5 "G26 \n"
 #endif
 
 /**
@@ -1445,6 +1515,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+#define ACTION_ON_PAUSE "pause"
+#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1556,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1568,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1600,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE

Marlin/G26_Mesh_Validation_Tool.cpp

@@ -33,7 +33,8 @@
   #include "stepper.h"
   #include "temperature.h"
   #include "ultralcd.h"
-  #include "gcode.h"
+  #include "parser.h"
+  #include "serial.h"
   #include "bitmap_flags.h"
 
   #if ENABLED(MESH_BED_LEVELING)
@@ -47,11 +48,11 @@
   #define PRIME_LENGTH 10.0
   #define OOZE_AMOUNT 0.3
 
-  #define SIZE_OF_INTERSECTION_CIRCLES 5
-  #define SIZE_OF_CROSSHAIRS 3
+  #define INTERSECTION_CIRCLE_RADIUS 5
+  #define CROSSHAIRS_SIZE 3
 
-  #if SIZE_OF_CROSSHAIRS >= SIZE_OF_INTERSECTION_CIRCLES
-    #error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
+  #if CROSSHAIRS_SIZE >= INTERSECTION_CIRCLE_RADIUS
+    #error "CROSSHAIRS_SIZE must be less than INTERSECTION_CIRCLE_RADIUS."
   #endif
 
   #define G26_OK false
@@ -133,15 +134,11 @@
   // External references
 
   extern Planner planner;
-  #if ENABLED(ULTRA_LCD)
-    extern char lcd_status_message[];
-  #endif
-  inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); }
 
   // Private functions
 
   static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16];
-  float g26_e_axis_feedrate = 0.020,
+  float g26_e_axis_feedrate = 0.025,
         random_deviation = 0.0;
 
   static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
@@ -158,7 +155,7 @@
 
   static int8_t g26_prime_flag;
 
-  #if ENABLED(NEWPANEL)
+  #if ENABLED(ULTIPANEL)
 
     /**
      * If the LCD is clicked, cancel, wait for release, return true
@@ -167,7 +164,7 @@
       if (!is_lcd_clicked()) return false; // Return if the button isn't pressed
       lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
       #if ENABLED(ULTIPANEL)
-        lcd_quick_feedback();
+        lcd_quick_feedback(true);
       #endif
       wait_for_release();
       return true;
@@ -183,9 +180,9 @@
 
   void G26_line_to_destination(const float &feed_rate) {
     const float save_feedrate = feedrate_mm_s;
-    feedrate_mm_s = feed_rate;      // use specified feed rate
+    feedrate_mm_s = feed_rate;
     prepare_move_to_destination();  // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_SEGMENTED
-    feedrate_mm_s = save_feedrate;  // restore global feed rate
+    feedrate_mm_s = save_feedrate;
   }
 
   void move_to(const float &rx, const float &ry, const float &z, const float &e_delta) {
@@ -201,11 +198,9 @@
       destination[X_AXIS] = current_position[X_AXIS];
       destination[Y_AXIS] = current_position[Y_AXIS];
       destination[Z_AXIS] = z;                          // We know the last_z==z or we wouldn't be in this block of code.
-      destination[E_AXIS] = current_position[E_AXIS];
+      destination[E_CART] = current_position[E_CART];
 
       G26_line_to_destination(feed_value);
-
-      stepper.synchronize();
       set_destination_from_current();
     }
 
@@ -217,11 +212,9 @@
 
     destination[X_AXIS] = rx;
     destination[Y_AXIS] = ry;
-    destination[E_AXIS] += e_delta;
+    destination[E_CART] += e_delta;
 
     G26_line_to_destination(feed_value);
-
-    stepper.synchronize();
     set_destination_from_current();
   }
 
@@ -246,7 +239,7 @@
    */
   inline bool prime_nozzle() {
 
-    #if ENABLED(NEWPANEL)
+    #if ENABLED(ULTIPANEL)
       float Total_Prime = 0.0;
 
       if (g26_prime_flag == -1) {  // The user wants to control how much filament gets purged
@@ -261,27 +254,25 @@
 
         while (!is_lcd_clicked()) {
           lcd_chirp();
-          destination[E_AXIS] += 0.25;
+          destination[E_CART] += 0.25;
           #ifdef PREVENT_LENGTHY_EXTRUDE
             Total_Prime += 0.25;
             if (Total_Prime >= EXTRUDE_MAXLENGTH) return G26_ERR;
           #endif
           G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
-
-          stepper.synchronize();    // Without this synchronize, the purge is more consistent,
+          set_destination_from_current();
+          planner.synchronize();    // Without this synchronize, the purge is more consistent,
                                     // but because the planner has a buffer, we won't be able
                                     // to stop as quickly. So we put up with the less smooth
                                     // action to give the user a more responsive 'Stop'.
-          set_destination_from_current();
-          idle();
+
+          SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
         }
 
         wait_for_release();
 
-        strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue;
-                                                            // So... We cheat to get a message up.
         lcd_setstatusPGM(PSTR("Done Priming"), 99);
-        lcd_quick_feedback();
+        lcd_quick_feedback(true);
         lcd_external_control = false;
       }
       else
@@ -289,12 +280,11 @@
     {
       #if ENABLED(ULTRA_LCD)
         lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99);
-        lcd_quick_feedback();
+        lcd_quick_feedback(true);
       #endif
       set_destination_from_current();
-      destination[E_AXIS] += g26_prime_length;
+      destination[E_CART] += g26_prime_length;
       G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
-      stepper.synchronize();
       set_destination_from_current();
       retract_filament(destination);
     }
@@ -368,7 +358,7 @@
 
     // If the end point of the line is closer to the nozzle, flip the direction,
     // moving from the end to the start. On very small lines the optimization isn't worth it.
-    if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length))
+    if (dist_end < dist_start && (INTERSECTION_CIRCLE_RADIUS) < ABS(line_length))
       return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
 
     // Decide whether to retract & bump
@@ -394,7 +384,7 @@
     for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
       for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
 
-        #if ENABLED(NEWPANEL)
+        #if ENABLED(ULTIPANEL)
           if (user_canceled()) return true;     // Check if the user wants to stop the Mesh Validation
         #endif
 
@@ -408,8 +398,8 @@
               // We found two circles that need a horizontal line to connect them
               // Print it!
               //
-              sx = _GET_MESH_X(  i  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge
-              ex = _GET_MESH_X(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge
+              sx = _GET_MESH_X(  i  ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // right edge
+              ex = _GET_MESH_X(i + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // left edge
 
               sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1);
               sy = ey = constrain(_GET_MESH_Y(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
@@ -441,8 +431,8 @@
                 // We found two circles that need a vertical line to connect them
                 // Print it!
                 //
-                sy = _GET_MESH_Y(  j  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge
-                ey = _GET_MESH_Y(j + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge
+                sy = _GET_MESH_Y(  j  ) + (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // top edge
+                ey = _GET_MESH_Y(j + 1) - (INTERSECTION_CIRCLE_RADIUS - (CROSSHAIRS_SIZE)); // bottom edge
 
                 sx = ex = constrain(_GET_MESH_X(i), X_MIN_POS + 1, X_MAX_POS - 1);
                 sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
@@ -480,17 +470,19 @@
    */
   inline bool turn_on_heaters() {
     millis_t next = millis() + 5000UL;
-    #if HAS_TEMP_BED
+    #if HAS_HEATED_BED
       #if ENABLED(ULTRA_LCD)
         if (g26_bed_temp > 25) {
           lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99);
-          lcd_quick_feedback();
-          lcd_external_control = true;
+          lcd_quick_feedback(true);
+          #if ENABLED(ULTIPANEL)
+            lcd_external_control = true;
+          #endif
       #endif
           thermalManager.setTargetBed(g26_bed_temp);
-          while (abs(thermalManager.degBed() - g26_bed_temp) > 3) {
+          while (ABS(thermalManager.degBed() - g26_bed_temp) > 3) {
 
-            #if ENABLED(NEWPANEL)
+            #if ENABLED(ULTIPANEL)
               if (is_lcd_clicked()) return exit_from_g26();
             #endif
 
@@ -500,19 +492,20 @@
               SERIAL_EOL();
             }
             idle();
+            SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
           }
       #if ENABLED(ULTRA_LCD)
         }
         lcd_setstatusPGM(PSTR("G26 Heating Nozzle."), 99);
-        lcd_quick_feedback();
+        lcd_quick_feedback(true);
       #endif
     #endif
 
     // Start heating the nozzle and wait for it to reach temperature.
     thermalManager.setTargetHotend(g26_hotend_temp, 0);
-    while (abs(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
+    while (ABS(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
 
-      #if ENABLED(NEWPANEL)
+      #if ENABLED(ULTIPANEL)
         if (is_lcd_clicked()) return exit_from_g26();
       #endif
 
@@ -522,11 +515,12 @@
         SERIAL_EOL();
       }
       idle();
-    }
 
+      SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
+    }
     #if ENABLED(ULTRA_LCD)
       lcd_reset_status();
-      lcd_quick_feedback();
+      lcd_quick_feedback(true);
     #endif
 
     return G26_OK;
@@ -543,12 +537,27 @@
    *
    * Used to interactively edit the mesh by placing the
    * nozzle in a problem area and doing a G29 P4 R command.
+   *
+   * Parameters:
+   *
+   *  B  Bed Temperature
+   *  C  Continue from the Closest mesh point
+   *  D  Disable leveling before starting
+   *  F  Filament diameter
+   *  H  Hotend Temperature
+   *  K  Keep heaters on when completed
+   *  L  Layer Height
+   *  O  Ooze extrusion length
+   *  P  Prime length
+   *  Q  Retraction multiplier
+   *  R  Repetitions (number of grid points)
+   *  S  Nozzle Size (diameter) in mm
+   *  U  Random deviation (50 if no value given)
+   *  X  X position
+   *  Y  Y position
    */
   void gcode_G26() {
     SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s).");
-    float tmp, start_angle, end_angle;
-    int   i, xi, yi;
-    mesh_index_pair location;
 
     // Don't allow Mesh Validation without homing first,
     // or if the parameter parsing did not go OK, abort
@@ -571,8 +580,8 @@
 
     if (parser.seenval('B')) {
       g26_bed_temp = parser.value_celsius();
-      if (!WITHIN(g26_bed_temp, 15, 140)) {
-        SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible.");
+      if (g26_bed_temp && !WITHIN(g26_bed_temp, 40, 140)) {
+        SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible (40-140C).");
         return;
       }
     }
@@ -609,7 +618,7 @@
 
     if (parser.seen('P')) {
       if (!parser.has_value()) {
-        #if ENABLED(NEWPANEL)
+        #if ENABLED(ULTIPANEL)
           g26_prime_flag = -1;
         #else
           SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD.");
@@ -654,7 +663,7 @@
     }
 
     int16_t g26_repeats;
-    #if ENABLED(NEWPANEL)
+    #if ENABLED(ULTIPANEL)
       g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
     #else
       if (!parser.seen('R')) {
@@ -683,13 +692,12 @@
 
     if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
       do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-      stepper.synchronize();
       set_current_from_destination();
     }
 
     if (turn_on_heaters() != G26_OK) goto LEAVE;
 
-    current_position[E_AXIS] = 0.0;
+    current_position[E_CART] = 0.0;
     sync_plan_position_e();
 
     if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE;
@@ -714,24 +722,35 @@
     move_to(destination, 0.0);
     move_to(destination, g26_ooze_amount);
 
-    #if ENABLED(ULTRA_LCD)
+    #if ENABLED(ULTIPANEL)
       lcd_external_control = true;
     #endif
 
     //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
 
-    /**
-     * Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten
-     * the CPU load and make the arc drawing faster and more smooth
-     */
-    float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1];
-    for (i = 0; i <= 360 / 30; i++) {
-      cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0)));
-      sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0)));
-    }
+    #if DISABLED(ARC_SUPPORT)
 
+      /**
+       * Pre-generate radius offset values at 30 degree intervals to reduce CPU load.
+       */
+      #define A_INT 30
+      #define _ANGS (360 / A_INT)
+      #define A_CNT (_ANGS / 2)
+      #define _IND(A) ((A + _ANGS * 8) % _ANGS)
+      #define _COS(A) (trig_table[_IND(A) % A_CNT] * (_IND(A) >= A_CNT ? -1 : 1))
+      #define _SIN(A) (-_COS((A + A_CNT / 2) % _ANGS))
+      #if A_CNT & 1
+        #error "A_CNT must be a positive value. Please change A_INT."
+      #endif
+      float trig_table[A_CNT];
+      for (uint8_t i = 0; i < A_CNT; i++)
+        trig_table[i] = INTERSECTION_CIRCLE_RADIUS * cos(RADIANS(i * A_INT));
+
+    #endif // !ARC_SUPPORT
+
+    mesh_index_pair location;
     do {
-      location = g26_continue_with_closest
+       location = g26_continue_with_closest
         ? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS])
         : find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now.
 
@@ -740,87 +759,133 @@
                     circle_y = _GET_MESH_Y(location.y_index);
 
         // If this mesh location is outside the printable_radius, skip it.
-
         if (!position_is_reachable(circle_x, circle_y)) continue;
 
-        xi = location.x_index;  // Just to shrink the next few lines and make them easier to understand
-        yi = location.y_index;
+        // Determine where to start and end the circle,
+        // which is always drawn counter-clockwise.
+        const uint8_t xi = location.x_index, yi = location.y_index;
+        const bool f = yi == 0, r = xi >= GRID_MAX_POINTS_X - 1, b = yi >= GRID_MAX_POINTS_Y - 1;
 
-        if (g26_debug_flag) {
-          SERIAL_ECHOPAIR("   Doing circle at: (xi=", xi);
-          SERIAL_ECHOPAIR(", yi=", yi);
-          SERIAL_CHAR(')');
-          SERIAL_EOL();
-        }
+        #if ENABLED(ARC_SUPPORT)
 
-        start_angle = 0.0;    // assume it is going to be a full circle
-        end_angle   = 360.0;
-        if (xi == 0) {       // Check for bottom edge
-          start_angle = -90.0;
-          end_angle   =  90.0;
-          if (yi == 0)        // it is an edge, check for the two left corners
-            start_angle = 0.0;
-          else if (yi == GRID_MAX_POINTS_Y - 1)
-            end_angle = 0.0;
-        }
-        else if (xi == GRID_MAX_POINTS_X - 1) { // Check for top edge
-          start_angle =  90.0;
-          end_angle   = 270.0;
-          if (yi == 0)                  // it is an edge, check for the two right corners
-            end_angle = 180.0;
-          else if (yi == GRID_MAX_POINTS_Y - 1)
-            start_angle = 180.0;
-        }
-        else if (yi == 0) {
-          start_angle =   0.0;         // only do the top   side of the cirlce
-          end_angle   = 180.0;
-        }
-        else if (yi == GRID_MAX_POINTS_Y - 1) {
-          start_angle = 180.0;         // only do the bottom side of the cirlce
-          end_angle   = 360.0;
-        }
+          #define ARC_LENGTH(quarters)  (INTERSECTION_CIRCLE_RADIUS * M_PI * (quarters) / 2)
+          float sx = circle_x + INTERSECTION_CIRCLE_RADIUS,   // default to full circle
+                ex = circle_x + INTERSECTION_CIRCLE_RADIUS,
+                sy = circle_y, ey = circle_y,
+                arc_length = ARC_LENGTH(4);
 
-        for (tmp = start_angle; tmp < end_angle - 0.1; tmp += 30.0) {
+          // Figure out where to start and end the arc - we always print counterclockwise
+          if (xi == 0) {                             // left edge
+            sx = f ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x;
+            ex = b ? circle_x + INTERSECTION_CIRCLE_RADIUS : circle_x;
+            sy = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS;
+            ey = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS;
+            arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2);
+          }
+          else if (r) {                             // right edge
+            sx = b ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x;
+            ex = f ? circle_x - INTERSECTION_CIRCLE_RADIUS : circle_x;
+            sy = b ? circle_y : circle_y + INTERSECTION_CIRCLE_RADIUS;
+            ey = f ? circle_y : circle_y - INTERSECTION_CIRCLE_RADIUS;
+            arc_length = (f || b) ? ARC_LENGTH(1) : ARC_LENGTH(2);
+          }
+          else if (f) {
+            sx = circle_x + INTERSECTION_CIRCLE_RADIUS;
+            ex = circle_x - INTERSECTION_CIRCLE_RADIUS;
+            sy = ey = circle_y;
+            arc_length = ARC_LENGTH(2);
+          }
+          else if (b) {
+            sx = circle_x - INTERSECTION_CIRCLE_RADIUS;
+            ex = circle_x + INTERSECTION_CIRCLE_RADIUS;
+            sy = ey = circle_y;
+            arc_length = ARC_LENGTH(2);
+          }
+          const float arc_offset[2] = {
+            circle_x - sx,
+            circle_y - sy
+          };
 
-          #if ENABLED(NEWPANEL)
-            if (user_canceled()) goto LEAVE;              // Check if the user wants to stop the Mesh Validation
+          const float dx_s = current_position[X_AXIS] - sx,   // find our distance from the start of the actual circle
+                      dy_s = current_position[Y_AXIS] - sy,
+                      dist_start = HYPOT2(dx_s, dy_s);
+          const float endpoint[XYZE] = {
+            ex, ey,
+            g26_layer_height,
+            current_position[E_CART] + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier)
+          };
+
+          if (dist_start > 2.0) {
+            retract_filament(destination);
+            //todo:  parameterize the bump height with a define
+            move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0);  // Z bump to minimize scraping
+            move_to(sx, sy, g26_layer_height + 0.500, 0.0); // Get to the starting point with no extrusion while bumped
+          }
+
+          move_to(sx, sy, g26_layer_height, 0.0); // Get to the starting point with no extrusion / un-Z bump
+
+          recover_filament(destination);
+          const float save_feedrate = feedrate_mm_s;
+          feedrate_mm_s = PLANNER_XY_FEEDRATE() / 10.0;
+          plan_arc(endpoint, arc_offset, false);  // Draw a counter-clockwise arc
+          feedrate_mm_s = save_feedrate;
+          set_destination_from_current();
+          #if ENABLED(ULTIPANEL)
+            if (user_canceled()) goto LEAVE; // Check if the user wants to stop the Mesh Validation
           #endif
 
-          int tmp_div_30 = tmp / 30.0;
-          if (tmp_div_30 < 0) tmp_div_30 += 360 / 30;
-          if (tmp_div_30 > 11) tmp_div_30 -= 360 / 30;
+        #else // !ARC_SUPPORT
 
-          float rx = circle_x + cos_table[tmp_div_30],    // for speed, these are now a lookup table entry
-                ry = circle_y + sin_table[tmp_div_30],
-                xe = circle_x + cos_table[tmp_div_30 + 1],
-                ye = circle_y + sin_table[tmp_div_30 + 1];
-          #if IS_KINEMATIC
-            // Check to make sure this segment is entirely on the bed, skip if not.
-            if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue;
-          #else                                               // not, we need to skip
-            rx = constrain(rx, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
-            ry = constrain(ry, Y_MIN_POS + 1, Y_MAX_POS - 1);
-            xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
-            ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1);
-          #endif
+          int8_t start_ind = -2, end_ind = 9; // Assume a full circle (from 5:00 to 5:00)
+          if (xi == 0) {                      // Left edge? Just right half.
+            start_ind = f ? 0 : -3;           //  03:00 to 12:00 for front-left
+            end_ind = b ? 0 : 2;              //  06:00 to 03:00 for back-left
+          }
+          else if (r) {                       // Right edge? Just left half.
+            start_ind = b ? 6 : 3;            //  12:00 to 09:00 for front-right
+            end_ind = f ? 5 : 8;              //  09:00 to 06:00 for back-right
+          }
+          else if (f) {                       // Front edge? Just back half.
+            start_ind = 0;                    //  03:00
+            end_ind = 5;                      //  09:00
+          }
+          else if (b) {                       // Back edge? Just front half.
+            start_ind = 6;                    //  09:00
+            end_ind = 11;                     //  03:00
+          }
 
-          //if (g26_debug_flag) {
-          //  char ccc, *cptr, seg_msg[50], seg_num[10];
-          //  strcpy(seg_msg, "   segment: ");
-          //  strcpy(seg_num, "    \n");
-          //  cptr = (char*) "01234567890ABCDEF????????";
-          //  ccc = cptr[tmp_div_30];
-          //  seg_num[1] = ccc;
-          //  strcat(seg_msg, seg_num);
-          //  debug_current_and_destination(seg_msg);
-          //}
+          for (int8_t ind = start_ind; ind <= end_ind; ind++) {
 
-          print_line_from_here_to_there(rx, ry, g26_layer_height, xe, ye, g26_layer_height);
+            #if ENABLED(ULTIPANEL)
+              if (user_canceled()) goto LEAVE;          // Check if the user wants to stop the Mesh Validation
+            #endif
 
-        }
-        if (look_for_lines_to_connect())
-          goto LEAVE;
+            float rx = circle_x + _COS(ind),            // For speed, these are now a lookup table entry
+                  ry = circle_y + _SIN(ind),
+                  xe = circle_x + _COS(ind + 1),
+                  ye = circle_y + _SIN(ind + 1);
+
+            #if IS_KINEMATIC
+              // Check to make sure this segment is entirely on the bed, skip if not.
+              if (!position_is_reachable(rx, ry) || !position_is_reachable(xe, ye)) continue;
+            #else                                               // not, we need to skip
+              rx = constrain(rx, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
+              ry = constrain(ry, Y_MIN_POS + 1, Y_MAX_POS - 1);
+              xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
+              ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1);
+            #endif
+
+            print_line_from_here_to_there(rx, ry, g26_layer_height, xe, ye, g26_layer_height);
+            SERIAL_FLUSH();  // Prevent host M105 buffer overrun.
+          }
+
+        #endif // !ARC_SUPPORT
+
+        if (look_for_lines_to_connect()) goto LEAVE;
       }
+
+      SERIAL_FLUSH(); // Prevent host M105 buffer overrun.
+
     } while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
 
     LEAVE:
@@ -840,12 +905,12 @@
     move_to(destination, 0); // Move back to the starting position
     //debug_current_and_destination(PSTR("done doing X/Y move."));
 
-    #if ENABLED(ULTRA_LCD)
+    #if ENABLED(ULTIPANEL)
       lcd_external_control = false;     // Give back control of the LCD Panel!
     #endif
 
     if (!g26_keep_heaters_on) {
-      #if HAS_TEMP_BED
+      #if HAS_HEATED_BED
         thermalManager.setTargetBed(0);
       #endif
       thermalManager.setTargetHotend(0, 0);

Marlin/HAL.h

@@ -0,0 +1,337 @@
+/* **************************************************************************
+
+ Marlin 3D Printer Firmware
+ Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+
+ Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+
+ This program is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program.  If not, see <http://www.gnu.org/licenses/>.
+****************************************************************************/
+
+/**
+ * Description: HAL for __AVR__
+ */
+
+#ifndef _HAL_AVR_H_
+#define _HAL_AVR_H_
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include "fastio.h"
+
+#include <stdint.h>
+#include <Arduino.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+// --------------------------------------------------------------------------
+// Defines
+// --------------------------------------------------------------------------
+
+//#define analogInputToDigitalPin(IO) IO
+
+// Bracket code that shouldn't be interrupted
+#ifndef CRITICAL_SECTION_START
+  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END    SREG = _sreg
+#endif
+
+#define ISRS_ENABLED() TEST(SREG, SREG_I)
+#define ENABLE_ISRS()  sei()
+#define DISABLE_ISRS() cli()
+
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+typedef uint16_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFF
+
+typedef int8_t pin_t;
+
+#define HAL_SERVO_LIB Servo
+
+// --------------------------------------------------------------------------
+// Public Variables
+// --------------------------------------------------------------------------
+
+//extern uint8_t MCUSR;
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+//void cli(void);
+
+//void _delay_ms(const int delay);
+
+inline void HAL_clear_reset_source(void) { MCUSR = 0; }
+inline uint8_t HAL_get_reset_source(void) { return MCUSR; }
+
+// eeprom
+//void eeprom_write_byte(unsigned char *pos, unsigned char value);
+//unsigned char eeprom_read_byte(unsigned char *pos);
+
+// timers
+#define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
+
+#define STEP_TIMER_NUM          1
+#define TEMP_TIMER_NUM          0
+#define PULSE_TIMER_NUM         STEP_TIMER_NUM
+
+#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
+
+#define STEPPER_TIMER_RATE      HAL_TIMER_RATE
+#define STEPPER_TIMER_PRESCALE  8
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
+
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT()  SBI(TIMSK1, OCIE1A)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
+#define STEPPER_ISR_ENABLED()             TEST(TIMSK1, OCIE1A)
+
+#define ENABLE_TEMPERATURE_INTERRUPT()     SBI(TIMSK0, OCIE0B)
+#define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0B)
+#define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0B)
+
+FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
+  UNUSED(frequency);
+  switch (timer_num) {
+    case STEP_TIMER_NUM:
+      // waveform generation = 0100 = CTC
+      SET_WGM(1, CTC_OCRnA);
+
+      // output mode = 00 (disconnected)
+      SET_COMA(1, NORMAL);
+
+      // Set the timer pre-scaler
+      // Generally we use a divider of 8, resulting in a 2MHz timer
+      // frequency on a 16MHz MCU. If you are going to change this, be
+      // sure to regenerate speed_lookuptable.h with
+      // create_speed_lookuptable.py
+      SET_CS(1, PRESCALER_8);  //  CS 2 = 1/8 prescaler
+
+      // Init Stepper ISR to 122 Hz for quick starting
+      // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
+      OCR1A = 0x4000;
+      TCNT1 = 0;
+      break;
+
+    case TEMP_TIMER_NUM:
+      // Use timer0 for temperature measurement
+      // Interleave temperature interrupt with millies interrupt
+      OCR0B = 128;
+      break;
+  }
+}
+
+#define TIMER_OCR_1             OCR1A
+#define TIMER_COUNTER_1         TCNT1
+
+#define TIMER_OCR_0             OCR0A
+#define TIMER_COUNTER_0         TCNT0
+
+#define _CAT(a, ...) a ## __VA_ARGS__
+#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
+#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
+#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
+
+/**
+ * On AVR there is no hardware prioritization and preemption of
+ * interrupts, so this emulates it. The UART has first priority
+ * (otherwise, characters will be lost due to UART overflow).
+ * Then: Stepper, Endstops, Temperature, and -finally- all others.
+ */
+#define HAL_timer_isr_prologue(TIMER_NUM)
+#define HAL_timer_isr_epilogue(TIMER_NUM)
+
+/* 18 cycles maximum latency */
+#define HAL_STEP_TIMER_ISR \
+extern "C" void TIMER1_COMPA_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER1_COMPA_vect_bottom (void) asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER1_COMPA_vect (void) { \
+  __asm__ __volatile__ ( \
+    A("push r16")                      /* 2 Save R16 */ \
+    A("in r16, __SREG__")              /* 1 Get SREG */ \
+    A("push r16")                      /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")            /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("push r16")                      /* 2 Save TIMSK0 into the stack */ \
+    A("andi r16,~%[msk0]")             /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")            /* 2 And set the new value */ \
+    A("lds r16, %[timsk1]")            /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
+    A("andi r16,~%[msk1]")             /* 1 Disable the stepper ISR */ \
+    A("sts %[timsk1], r16")            /* 2 And set the new value */ \
+    A("push r16")                      /* 2 Save TIMSK1 into stack */ \
+    A("in r16, 0x3B")                  /* 1 Get RAMPZ register */ \
+    A("push r16")                      /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                  /* 1 Get EIND register */ \
+    A("push r0")                       /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                       \
+    A("push r18")                      \
+    A("push r19")                      \
+    A("push r20")                      \
+    A("push r21")                      \
+    A("push r22")                      \
+    A("push r23")                      \
+    A("push r24")                      \
+    A("push r25")                      \
+    A("push r26")                      \
+    A("push r27")                      \
+    A("push r30")                      \
+    A("push r31")                      \
+    A("clr r1")                        /* C runtime expects this register to be 0 */ \
+    A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                       \
+    A("pop r30")                       \
+    A("pop r27")                       \
+    A("pop r26")                       \
+    A("pop r25")                       \
+    A("pop r24")                       \
+    A("pop r23")                       \
+    A("pop r22")                       \
+    A("pop r21")                       \
+    A("pop r20")                       \
+    A("pop r19")                       \
+    A("pop r18")                       \
+    A("pop r1")                        \
+    A("pop r0")                        \
+    A("out 0x3C, r16")                 /* 1 Restore EIND register */ \
+    A("pop r16")                       /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                 /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                       /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
+    A("ori r16,%[msk1]")               /* 1 Reenable the stepper ISR */ \
+    A("cli")                           /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
+    A("sts %[timsk1], r16")            /* 2 And restore the old value - This reenables the stepper ISR */ \
+    A("pop r16")                       /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
+    A("sts %[timsk0], r16")            /* 2 And restore the old value - This reenables the temperature ISR */ \
+    A("pop r16")                       /* 2 Get the old SREG value */ \
+    A("out __SREG__, r16")             /* 1 And restore the SREG value */ \
+    A("pop r16")                       /* 2 Restore R16 value */ \
+    A("reti")                          /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i" ((uint16_t)&TIMSK0), \
+      [timsk1] "i" ((uint16_t)&TIMSK1), \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)),\
+      [msk1] "M" ((uint8_t)(1<<OCIE1A)) \
+    : \
+  ); \
+} \
+void TIMER1_COMPA_vect_bottom(void)
+
+/* 14 cycles maximum latency */
+#define HAL_TEMP_TIMER_ISR \
+extern "C" void TIMER0_COMPB_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER0_COMPB_vect_bottom(void)  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER0_COMPB_vect (void) { \
+  __asm__ __volatile__ ( \
+    A("push r16")                       /* 2 Save R16 */ \
+    A("in r16, __SREG__")               /* 1 Get SREG */ \
+    A("push r16")                       /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")             /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("andi r16,~%[msk0]")              /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")             /* 2 And set the new value */ \
+    A("sei")                            /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */    \
+    A("push r16")                       /* 2 Save TIMSK0 into stack */ \
+    A("in r16, 0x3B")                   /* 1 Get RAMPZ register */ \
+    A("push r16")                       /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                   /* 1 Get EIND register */ \
+    A("push r0")                        /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                        \
+    A("push r18")                       \
+    A("push r19")                       \
+    A("push r20")                       \
+    A("push r21")                       \
+    A("push r22")                       \
+    A("push r23")                       \
+    A("push r24")                       \
+    A("push r25")                       \
+    A("push r26")                       \
+    A("push r27")                       \
+    A("push r30")                       \
+    A("push r31")                       \
+    A("clr r1")                         /* C runtime expects this register to be 0 */ \
+    A("call TIMER0_COMPB_vect_bottom")  /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                        \
+    A("pop r30")                        \
+    A("pop r27")                        \
+    A("pop r26")                        \
+    A("pop r25")                        \
+    A("pop r24")                        \
+    A("pop r23")                        \
+    A("pop r22")                        \
+    A("pop r21")                        \
+    A("pop r20")                        \
+    A("pop r19")                        \
+    A("pop r18")                        \
+    A("pop r1")                         \
+    A("pop r0")                         \
+    A("out 0x3C, r16")                  /* 1 Restore EIND register */ \
+    A("pop r16")                        /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                  /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                        /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
+    A("ori r16,%[msk0]")                /* 1 Enable temperature ISR */ \
+    A("cli")                            /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
+    A("sts %[timsk0], r16")             /* 2 And restore the old value */ \
+    A("pop r16")                        /* 2 Get the old SREG */ \
+    A("out __SREG__, r16")              /* 1 And restore the SREG value */ \
+    A("pop r16")                        /* 2 Restore R16 */ \
+    A("reti")                           /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i"((uint16_t)&TIMSK0),  \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)) \
+    : \
+  ); \
+} \
+void TIMER0_COMPB_vect_bottom(void)
+
+// ADC
+#ifdef DIDR2
+  #define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)
+#else
+  #define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0)
+#endif
+
+inline void HAL_adc_init(void) {
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
+  DIDR0 = 0;
+  #ifdef DIDR2
+    DIDR2 = 0;
+  #endif
+}
+
+#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
+#ifdef MUX5
+  #define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+#else
+  #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+#endif
+
+#define HAL_READ_ADC()  ADC
+#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
+
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+#define HAL_SENSITIVE_PINS 0, 1
+
+#endif // _HAL_AVR_H_

Marlin/I2CPositionEncoder.cpp

@@ -36,7 +36,7 @@
   #include "temperature.h"
   #include "stepper.h"
   #include "I2CPositionEncoder.h"
-  #include "gcode.h"
+  #include "parser.h"
 
   #include <Wire.h>
 
@@ -99,7 +99,7 @@
 
           //the encoder likely lost its place when the error occured, so we'll reset and use the printer's
           //idea of where it the axis is to re-initialise
-          float position = stepper.get_axis_position_mm(encoderAxis);
+          float position = planner.get_axis_position_mm(encoderAxis);
           int32_t positionInTicks = position * get_ticks_unit();
 
           //shift position from previous to current position
@@ -117,7 +117,7 @@
 
             SERIAL_ECHOPGM("New position reads as ");
             SERIAL_ECHO(get_position());
-            SERIAL_ECHOPGM("(");
+            SERIAL_CHAR('(');
             SERIAL_ECHO(mm_from_count(get_position()));
             SERIAL_ECHOLNPGM(")");
           #endif
@@ -134,7 +134,7 @@
 
       #ifdef I2CPE_EC_THRESH_PROPORTIONAL
         const millis_t deltaTime = positionTime - lastPositionTime;
-        const uint32_t distance = abs(position - lastPosition),
+        const uint32_t distance = ABS(position - lastPosition),
                        speed = distance / deltaTime;
         const float threshold = constrain((speed / 50), 1, 50) * ecThreshold;
       #else
@@ -150,7 +150,7 @@
 
         LOOP_L_N(i, I2CPE_ERR_ARRAY_SIZE) {
           sum += err[i];
-          if (i) diffSum += abs(err[i-1] - err[i]);
+          if (i) diffSum += ABS(err[i-1] - err[i]);
         }
 
         const int32_t error = int32_t(sum / (I2CPE_ERR_ARRAY_SIZE + 1)); //calculate average for error
@@ -163,7 +163,7 @@
       //SERIAL_ECHOLN(error);
 
       #ifdef I2CPE_ERR_THRESH_ABORT
-        if (labs(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) {
+        if (ABS(error) > I2CPE_ERR_THRESH_ABORT * planner.axis_steps_per_mm[encoderAxis]) {
           //kill("Significant Error");
           SERIAL_ECHOPGM("Axis error greater than set threshold, aborting!");
           SERIAL_ECHOLN(error);
@@ -173,26 +173,34 @@
 
       #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
         if (errIdx == 0) {
-          // in order to correct for "error" but avoid correcting for noise and non skips
+          // In order to correct for "error" but avoid correcting for noise and non-skips
           // it must be > threshold and have a difference average of < 10 and be < 2000 steps
-          if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis] &&
-              diffSum < 10 * (I2CPE_ERR_ARRAY_SIZE - 1) && labs(error) < 2000) { //Check for persistent error (skip)
-            SERIAL_ECHO(axis_codes[encoderAxis]);
-            SERIAL_ECHOPAIR(" diffSum: ", diffSum / (I2CPE_ERR_ARRAY_SIZE - 1));
-            SERIAL_ECHOPAIR(" - err detected: ", error / planner.axis_steps_per_mm[encoderAxis]);
-            SERIAL_ECHOLNPGM("mm; correcting!");
-            thermalManager.babystepsTodo[encoderAxis] = -LROUND(error);
+          if (ABS(error) > threshold * planner.axis_steps_per_mm[encoderAxis] &&
+              diffSum < 10 * (I2CPE_ERR_ARRAY_SIZE - 1) && ABS(error) < 2000) { // Check for persistent error (skip)
+            errPrst[errPrstIdx++] = error; // Error must persist for I2CPE_ERR_PRST_ARRAY_SIZE error cycles. This also serves to improve the average accuracy
+            if (errPrstIdx >= I2CPE_ERR_PRST_ARRAY_SIZE) {
+              float sumP = 0;
+              LOOP_L_N(i, I2CPE_ERR_PRST_ARRAY_SIZE) sumP += errPrst[i];
+              const int32_t errorP = int32_t(sumP * (1.0f / (I2CPE_ERR_PRST_ARRAY_SIZE)));
+              SERIAL_ECHO(axis_codes[encoderAxis]);
+              SERIAL_ECHOPAIR(" - err detected: ", errorP * planner.steps_to_mm[encoderAxis]);
+              SERIAL_ECHOLNPGM("mm; correcting!");
+              thermalManager.babystepsTodo[encoderAxis] = -LROUND(errorP);
+              errPrstIdx = 0;
+            }
           }
+          else
+            errPrstIdx = 0;
         }
       #else
-        if (labs(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) {
+        if (ABS(error) > threshold * planner.axis_steps_per_mm[encoderAxis]) {
           //SERIAL_ECHOLN(error);
           //SERIAL_ECHOLN(position);
-          thermalManager.babystepsTodo[encoderAxis] = -LROUND(error/2);
+          thermalManager.babystepsTodo[encoderAxis] = -LROUND(error / 2);
         }
       #endif
 
-      if (labs(error) > I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) {
+      if (ABS(error) > I2CPE_ERR_CNT_THRESH * planner.axis_steps_per_mm[encoderAxis]) {
         const millis_t ms = millis();
         if (ELAPSED(ms, nextErrorCountTime)) {
           SERIAL_ECHOPAIR("Large error on ", axis_codes[encoderAxis]);
@@ -246,11 +254,11 @@
   float I2CPositionEncoder::get_axis_error_mm(const bool report) {
     float target, actual, error;
 
-    target = stepper.get_axis_position_mm(encoderAxis);
+    target = planner.get_axis_position_mm(encoderAxis);
     actual = mm_from_count(position);
     error = actual - target;
 
-    if (labs(error) > 10000) error = 0; // ?
+    if (ABS(error) > 10000) error = 0; // ?
 
     if (report) {
       SERIAL_ECHO(axis_codes[encoderAxis]);
@@ -285,7 +293,7 @@
             error = (encoderCountInStepperTicksScaled - target);
 
     //suppress discontinuities (might be caused by bad I2C readings...?)
-    bool suppressOutput = (labs(error - errorPrev) > 100);
+    const bool suppressOutput = (ABS(error - errorPrev) > 100);
 
     if (report) {
       SERIAL_ECHO(axis_codes[encoderAxis]);
@@ -341,18 +349,18 @@
     ec = false;
 
     LOOP_NA(i) {
-      startCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
-      endCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
+      startCoord[i] = planner.get_axis_position_mm((AxisEnum)i);
+      endCoord[i] = planner.get_axis_position_mm((AxisEnum)i);
     }
 
     startCoord[encoderAxis] = startPosition;
     endCoord[encoderAxis] = endPosition;
 
-    stepper.synchronize();
+    planner.synchronize();
 
-    planner.buffer_line(startCoord[X_AXIS],startCoord[Y_AXIS],startCoord[Z_AXIS],
-                        stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
-    stepper.synchronize();
+    planner.buffer_line(startCoord[X_AXIS], startCoord[Y_AXIS], startCoord[Z_AXIS],
+                        planner.get_axis_position_mm(E_AXIS), feedrate, 0);
+    planner.synchronize();
 
     // if the module isn't currently trusted, wait until it is (or until it should be if things are working)
     if (!trusted) {
@@ -363,8 +371,8 @@
 
     if (trusted) { // if trusted, commence test
       planner.buffer_line(endCoord[X_AXIS], endCoord[Y_AXIS], endCoord[Z_AXIS],
-                          stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
-      stepper.synchronize();
+                          planner.get_axis_position_mm(E_AXIS), feedrate, 0);
+      planner.synchronize();
     }
 
     return trusted;
@@ -400,34 +408,34 @@
     travelDistance = endDistance - startDistance;
 
     LOOP_NA(i) {
-      startCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
-      endCoord[i] = stepper.get_axis_position_mm((AxisEnum)i);
+      startCoord[i] = planner.get_axis_position_mm((AxisEnum)i);
+      endCoord[i] = planner.get_axis_position_mm((AxisEnum)i);
     }
 
     startCoord[encoderAxis] = startDistance;
     endCoord[encoderAxis] = endDistance;
 
-    LOOP_L_N(i, iter) {
-      stepper.synchronize();
+    planner.synchronize();
 
-      planner.buffer_line(startCoord[X_AXIS],startCoord[Y_AXIS],startCoord[Z_AXIS],
-                          stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
-      stepper.synchronize();
+    LOOP_L_N(i, iter) {
+      planner.buffer_line(startCoord[X_AXIS], startCoord[Y_AXIS], startCoord[Z_AXIS],
+                          planner.get_axis_position_mm(E_AXIS), feedrate, 0);
+      planner.synchronize();
 
       delay(250);
       startCount = get_position();
 
       //do_blocking_move_to(endCoord[X_AXIS],endCoord[Y_AXIS],endCoord[Z_AXIS]);
 
-      planner.buffer_line(endCoord[X_AXIS],endCoord[Y_AXIS],endCoord[Z_AXIS],
-                          stepper.get_axis_position_mm(E_AXIS), feedrate, 0);
-      stepper.synchronize();
+      planner.buffer_line(endCoord[X_AXIS], endCoord[Y_AXIS], endCoord[Z_AXIS],
+                          planner.get_axis_position_mm(E_AXIS), feedrate, 0);
+      planner.synchronize();
 
       //Read encoder distance
       delay(250);
       stopCount = get_position();
 
-      travelledDistance = mm_from_count(abs(stopCount - startCount));
+      travelledDistance = mm_from_count(ABS(stopCount - startCount));
 
       SERIAL_ECHOPAIR("Attempted to travel: ", travelDistance);
       SERIAL_ECHOLNPGM("mm.");

Marlin/I2CPositionEncoder.h

@@ -78,6 +78,7 @@
 
   #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
     #define I2CPE_ERR_ARRAY_SIZE        32
+    #define I2CPE_ERR_PRST_ARRAY_SIZE   10
   #endif
 
   // Error Correction Methods
@@ -97,8 +98,6 @@
   #define LOOP_PE(VAR) LOOP_L_N(VAR, I2CPE_ENCODER_CNT)
   #define CHECK_IDX() do{ if (!WITHIN(idx, 0, I2CPE_ENCODER_CNT - 1)) return; }while(0)
 
-  extern const char axis_codes[XYZE];
-
   typedef union {
     volatile int32_t val = 0;
     uint8_t          bval[4];
@@ -135,15 +134,12 @@
               nextErrorCountTime  = 0,
               lastErrorTime;
 
-    //double        positionMm; //calculate
-
     #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
-      uint8_t errIdx = 0;
-      int     err[I2CPE_ERR_ARRAY_SIZE] = { 0 };
+      uint8_t errIdx = 0, errPrstIdx = 0;
+      int err[I2CPE_ERR_ARRAY_SIZE] = { 0 },
+          errPrst[I2CPE_ERR_PRST_ARRAY_SIZE] = { 0 };
     #endif
 
-    //float        positionMm; //calculate
-
   public:
     void init(const uint8_t address, const AxisEnum axis);
     void reset();

Marlin/M100_Free_Mem_Chk.cpp

@@ -45,25 +45,24 @@
  *
  * Initial version by Roxy-3D
  */
-#define M100_FREE_MEMORY_DUMPER     // Enable for the `M110 D` Dump sub-command
-#define M100_FREE_MEMORY_CORRUPTOR  // Enable for the `M100 C` Corrupt sub-command
 
 #include "MarlinConfig.h"
 
 #if ENABLED(M100_FREE_MEMORY_WATCHER)
 
-#define TEST_BYTE ((char) 0xE5)
+#define M100_FREE_MEMORY_DUMPER     // Enable for the `M100 D` Dump sub-command
+#define M100_FREE_MEMORY_CORRUPTOR  // Enable for the `M100 C` Corrupt sub-command
 
-extern char command_queue[BUFSIZE][MAX_CMD_SIZE];
+#include "Marlin.h"
+#include "parser.h"
+#include "hex_print_routines.h"
+
+#define TEST_BYTE ((char) 0xE5)
 
 extern char* __brkval;
 extern size_t  __heap_start, __heap_end, __flp;
 extern char __bss_end;
 
-#include "Marlin.h"
-#include "gcode.h"
-#include "hex_print_routines.h"
-
 //
 // Utility functions
 //

Marlin/Makefile

@@ -1,4 +1,4 @@
-# Sprinter Arduino Project Makefile
+# Marlin Firmware Arduino Project Makefile
 #
 # Makefile Based on:
 # Arduino 0011 Makefile
@@ -96,152 +96,296 @@ RELOC_WORKAROUND   ?= 1
 # HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
 # MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
 
-#Gen7
-ifeq ($(HARDWARE_MOTHERBOARD),10)
+ifeq ($(HARDWARE_MOTHERBOARD),0)
+
+  # No motherboard selected
+
+#
+# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
+#
+
+# MEGA/RAMPS up to 1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),3)
+
+# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),33)
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),34)
+# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),35)
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),36)
+# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),38)
+
+# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),43)
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),44)
+# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),45)
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),46)
+# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),48)
+
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),143)
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),144)
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),145)
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),146)
+# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),148)
+
+#
+# RAMPS Derivatives - ATmega1280, ATmega2560
+#
+
+# 3Drag Controller
+else ifeq ($(HARDWARE_MOTHERBOARD),77)
+# Velleman K8200 Controller (derived from 3Drag Controller)
+else ifeq ($(HARDWARE_MOTHERBOARD),78)
+# Velleman K8400 Controller (derived from 3Drag Controller)
+else ifeq ($(HARDWARE_MOTHERBOARD),79)
+# 2PrintBeta BAM&DICE with STK drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),401)
+# 2PrintBeta BAM&DICE Due with STK drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),402)
+# MKS BASE v1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),40)
+# MKS v1.5 with Allegro A4982 stepper drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),405)
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),41)
+# MKS GEN v1.3 or 1.4
+else ifeq ($(HARDWARE_MOTHERBOARD),47)
+# MKS GEN L
+else ifeq ($(HARDWARE_MOTHERBOARD),53)
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
+else ifeq ($(HARDWARE_MOTHERBOARD),504)
+# Felix 2.0+ Electronics Board (RAMPS like)
+else ifeq ($(HARDWARE_MOTHERBOARD),37)
+# Invent-A-Part RigidBoard
+else ifeq ($(HARDWARE_MOTHERBOARD),42)
+# Invent-A-Part RigidBoard V2
+else ifeq ($(HARDWARE_MOTHERBOARD),52)
+# Sainsmart 2-in-1 board
+else ifeq ($(HARDWARE_MOTHERBOARD),49)
+# Ultimaker
+else ifeq ($(HARDWARE_MOTHERBOARD),7)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),71)
+MCU ?= atmega1280
+# Azteeg X3
+else ifeq ($(HARDWARE_MOTHERBOARD),67)
+# Azteeg X3 Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),68)
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+else ifeq ($(HARDWARE_MOTHERBOARD),72)
+# Rumba
+else ifeq ($(HARDWARE_MOTHERBOARD),80)
+# bq ZUM Mega 3D
+else ifeq ($(HARDWARE_MOTHERBOARD),503)
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+else ifeq ($(HARDWARE_MOTHERBOARD),431)
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+else ifeq ($(HARDWARE_MOTHERBOARD),343)
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+else ifeq ($(HARDWARE_MOTHERBOARD),443)
+# Creality: Ender-4, CR-8
+else ifeq ($(HARDWARE_MOTHERBOARD),243)
+
+#
+# Other ATmega1280, ATmega2560
+#
+
+# Cartesio CN Controls V11
+else ifeq ($(HARDWARE_MOTHERBOARD),111)
+# Cartesio CN Controls V12
+else ifeq ($(HARDWARE_MOTHERBOARD),112)
+# Cheaptronic v1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),2)
+# Cheaptronic v2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),21)
+# Makerbot Mightyboard Revision E
+else ifeq ($(HARDWARE_MOTHERBOARD),200)
+# Megatronics
+else ifeq ($(HARDWARE_MOTHERBOARD),70)
+# Megatronics v2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),701)
+# Megatronics v3.0
+else ifeq ($(HARDWARE_MOTHERBOARD),703)
+# Megatronics v3.1
+else ifeq ($(HARDWARE_MOTHERBOARD),704)
+# Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),301)
+# Mini-Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),302)
+# Mini-Rambo 1.0a
+else ifeq ($(HARDWARE_MOTHERBOARD),303)
+# Einsy Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),304)
+# Einsy Retro
+else ifeq ($(HARDWARE_MOTHERBOARD),305)
+# Elefu Ra Board (v3)
+else ifeq ($(HARDWARE_MOTHERBOARD),21)
+# Leapfrog
+else ifeq ($(HARDWARE_MOTHERBOARD),999)
+# Mega controller
+else ifeq ($(HARDWARE_MOTHERBOARD),310)
+# abee Scoovo X9H
+else ifeq ($(HARDWARE_MOTHERBOARD),321)
+# Geeetech GT2560 Rev. A
+else ifeq ($(HARDWARE_MOTHERBOARD),74)
+# Geeetech GT2560 Rev. A+ (with auto level probe)
+else ifeq ($(HARDWARE_MOTHERBOARD),75)
+
+#
+# ATmega1281, ATmega2561
+#
+
+else ifeq ($(HARDWARE_MOTHERBOARD),702)
+MCU              ?= atmega1281
+else ifeq ($(HARDWARE_MOTHERBOARD),25)
+MCU              ?= atmega1281
+
+#
+# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
+#
+
+# Sanguinololu < 1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),6)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Sanguinololu 1.2 and above
+else ifeq ($(HARDWARE_MOTHERBOARD),62)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Melzi
+else ifeq ($(HARDWARE_MOTHERBOARD),63)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Melzi with ATmega1284 (MaKr3d version)
+else ifeq ($(HARDWARE_MOTHERBOARD),66)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# Melzi Creality3D board (for CR-10 etc)
+else ifeq ($(HARDWARE_MOTHERBOARD),89)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# Melzi Malyan M150 board
+else ifeq ($(HARDWARE_MOTHERBOARD),92)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# Tronxy X5S
+else ifeq ($(HARDWARE_MOTHERBOARD),505)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# STB V1.1
+else ifeq ($(HARDWARE_MOTHERBOARD),64)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# Azteeg X1
+else ifeq ($(HARDWARE_MOTHERBOARD),65)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),69)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
+
+#
+# Other ATmega644P, ATmega644, ATmega1284P
+#
+
+# Gen3 Monolithic Electronics
+else ifeq ($(HARDWARE_MOTHERBOARD),22)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Gen3+
+else ifeq ($(HARDWARE_MOTHERBOARD),9)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Gen6
+else ifeq ($(HARDWARE_MOTHERBOARD),5)
+HARDWARE_VARIANT ?= Gen6
+MCU              ?= atmega644p
+# Gen6 deluxe
+else ifeq ($(HARDWARE_MOTHERBOARD),51)
+HARDWARE_VARIANT ?= Gen6
+MCU              ?= atmega644p
+# Gen7 custom (Alfons3 Version)
+else ifeq ($(HARDWARE_MOTHERBOARD),10)
 HARDWARE_VARIANT ?= Gen7
 MCU              ?= atmega644
 F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),11)
+# Gen7 v1.1, v1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),11)
 HARDWARE_VARIANT ?= Gen7
 MCU              ?= atmega644p
 F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),12)
+# Gen7 v1.3
+else ifeq ($(HARDWARE_MOTHERBOARD),12)
 HARDWARE_VARIANT ?= Gen7
 MCU              ?= atmega644p
 F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),13)
+# Gen7 v1.4
+else ifeq ($(HARDWARE_MOTHERBOARD),13)
 HARDWARE_VARIANT ?= Gen7
 MCU              ?= atmega1284p
 F_CPU            ?= 20000000
-
-#RAMPS
-else ifeq  ($(HARDWARE_MOTHERBOARD),3)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),33)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),34)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),35)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),36)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),38)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),43)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),44)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),45)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),46)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),48)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-
-#Gen6
-else ifeq  ($(HARDWARE_MOTHERBOARD),5)
-HARDWARE_VARIANT ?= Gen6
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),51)
-HARDWARE_VARIANT ?= Gen6
-MCU              ?= atmega644p
-
-#Sanguinololu
-else ifeq  ($(HARDWARE_MOTHERBOARD),6)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),62)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),63)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),65)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),66)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),69)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
-
-#Ultimaker
-else ifeq  ($(HARDWARE_MOTHERBOARD),7)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),71)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega1280
-
-#Teensylu
-else ifeq  ($(HARDWARE_MOTHERBOARD),8)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),81)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),811)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),82)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb646
-else ifeq  ($(HARDWARE_MOTHERBOARD),83)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),84)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-
-#Gen3+
-else ifeq  ($(HARDWARE_MOTHERBOARD),9)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Gen3 Monolithic Electronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),22)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-
-#Megatronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),70)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-
-#Alpha OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),90)
+# Alpha OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),90)
 HARDWARE_VARIANT ?= SanguinoA
 MCU              ?= atmega644
-
-#Final OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),91)
+# Final OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),91)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+# Sethi 3D_1
+else ifeq ($(HARDWARE_MOTHERBOARD),20)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega644p
 
-#Rambo
-else ifeq  ($(HARDWARE_MOTHERBOARD),301)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+#
+# Teensyduino - AT90USB1286, AT90USB1286P
+#
 
-# Azteeg
-else ifeq  ($(HARDWARE_MOTHERBOARD),67)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),68)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+# Teensylu
+else ifeq ($(HARDWARE_MOTHERBOARD),8)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# Printrboard (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),81)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# Printrboard Revision F (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),811)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# Brainwave (AT90USB646)
+else ifeq ($(HARDWARE_MOTHERBOARD),82)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb646
+# Brainwave Pro (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),83)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# SAV Mk-I (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),84)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84  make
+else ifeq ($(HARDWARE_MOTHERBOARD),85)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
+# 5DPrint D8 Driver Board
+else ifeq ($(HARDWARE_MOTHERBOARD),88)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
 
 endif
 
@@ -250,6 +394,10 @@ endif
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
+# Set to arduino, ATmega2560 if not yet set.
+HARDWARE_VARIANT ?= arduino
+MCU ?= atmega2560
+
 # Arduino contained the main source code for the Arduino
 # Libraries, the "hardware variant" are for boards
 # that derives from that, and their source are present in
@@ -382,9 +530,8 @@ CSTANDARD = -std=gnu99
 CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
 CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
-	-fshort-enums -w -ffunction-sections -fdata-sections \
-	-flto \
+CTUNING = -w -fsigned-char -funsigned-bitfields -fpack-struct \
+	-fshort-enums -ffunction-sections -fdata-sections -flto \
 	-DARDUINO=$(ARDUINO_VERSION)
 ifneq ($(HARDWARE_MOTHERBOARD),)
 CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}

Marlin/Marlin.h

@@ -29,14 +29,13 @@
 #include <inttypes.h>
 
 #include <util/delay.h>
-#include <avr/pgmspace.h>
 #include <avr/eeprom.h>
 #include <avr/interrupt.h>
 
 #include "MarlinConfig.h"
 
 #ifdef DEBUG_GCODE_PARSER
-  #include "gcode.h"
+  #include "parser.h"
 #endif
 
 #include "enum.h"
@@ -45,19 +44,15 @@
 #include "utility.h"
 #include "serial.h"
 
-#if ENABLED(PRINTCOUNTER)
-  #include "printcounter.h"
-#else
-  #include "stopwatch.h"
-#endif
-
 void idle(
   #if ENABLED(ADVANCED_PAUSE_FEATURE)
     bool no_stepper_sleep = false  // pass true to keep steppers from disabling on timeout
   #endif
 );
 
-void manage_inactivity(bool ignore_stepper_queue = false);
+void manage_inactivity(const bool ignore_stepper_queue=false);
+
+extern const char axis_codes[XYZE];
 
 #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
   extern bool extruder_duplication_enabled;
@@ -65,10 +60,10 @@ void manage_inactivity(bool ignore_stepper_queue = false);
 
 #if HAS_X2_ENABLE
   #define  enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
-  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
+  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
 #elif HAS_X_ENABLE
   #define  enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
-  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
+  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
 #else
   #define  enable_X() NOOP
   #define disable_X() NOOP
@@ -76,10 +71,10 @@ void manage_inactivity(bool ignore_stepper_queue = false);
 
 #if HAS_Y2_ENABLE
   #define  enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
-  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
+  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
 #elif HAS_Y_ENABLE
   #define  enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
-  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
+  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
 #else
   #define  enable_Y() NOOP
   #define disable_Y() NOOP
@@ -87,10 +82,10 @@ void manage_inactivity(bool ignore_stepper_queue = false);
 
 #if HAS_Z2_ENABLE
   #define  enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
-  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
+  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
 #elif HAS_Z_ENABLE
   #define  enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
-  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
+  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
 #else
   #define  enable_Z() NOOP
   #define disable_Z() NOOP
@@ -101,7 +96,10 @@ void manage_inactivity(bool ignore_stepper_queue = false);
   /**
    * Mixing steppers synchronize their enable (and direction) together
    */
-  #if MIXING_STEPPERS > 3
+  #if MIXING_STEPPERS > 4
+    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); }
+    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); }
+  #elif MIXING_STEPPERS > 3
     #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
     #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
   #elif MIXING_STEPPERS > 2
@@ -164,31 +162,69 @@ void manage_inactivity(bool ignore_stepper_queue = false);
 
 #endif // !MIXING_EXTRUDER
 
+#if ENABLED(HANGPRINTER)
+
+  #define enable_A() enable_X()
+  #define enable_B() enable_Y()
+  #define enable_C() enable_Z()
+  #define __D_ENABLE(p) E##p##_ENABLE_WRITE(E_ENABLE_ON)
+  #define _D_ENABLE(p) __D_ENABLE(p)
+  #define enable_D() _D_ENABLE(EXTRUDERS)
+
+  // Don't allow any axes to be disabled
+  #undef disable_X
+  #undef disable_Y
+  #undef disable_Z
+  #define disable_X() NOOP
+  #define disable_Y() NOOP
+  #define disable_Z() NOOP
+
+  #if EXTRUDERS >= 1
+    #undef disable_E1
+    #define disable_E1() NOOP
+    #if EXTRUDERS >= 2
+      #undef disable_E2
+      #define disable_E2() NOOP
+      #if EXTRUDERS >= 3
+        #undef disable_E3
+        #define disable_E3() NOOP
+        #if EXTRUDERS >= 4
+          #undef disable_E4
+          #define disable_E4() NOOP
+        #endif // EXTRUDERS >= 4
+      #endif // EXTRUDERS >= 3
+    #endif // EXTRUDERS >= 2
+  #endif // EXTRUDERS >= 1
+
+#endif // HANGPRINTER
+
 #if ENABLED(G38_PROBE_TARGET)
   extern bool G38_move,        // flag to tell the interrupt handler that a G38 command is being run
               G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
 #endif
 
-/**
- * The axis order in all axis related arrays is X, Y, Z, E
- */
-#define _AXIS(AXIS) AXIS ##_AXIS
-
 void enable_all_steppers();
+void disable_e_stepper(const uint8_t e);
 void disable_e_steppers();
 void disable_all_steppers();
 
-void FlushSerialRequestResend();
+void sync_plan_position();
+void sync_plan_position_e();
+
+#if IS_KINEMATIC
+  void sync_plan_position_kinematic();
+  #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position_kinematic()
+#else
+  #define SYNC_PLAN_POSITION_KINEMATIC() sync_plan_position()
+#endif
+
+void flush_and_request_resend();
 void ok_to_send();
 
 void kill(const char*);
 
 void quickstop_stepper();
 
-#if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  void handle_filament_runout();
-#endif
-
 extern uint8_t marlin_debug_flags;
 #define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
 
@@ -196,37 +232,58 @@ extern bool Running;
 inline bool IsRunning() { return  Running; }
 inline bool IsStopped() { return !Running; }
 
-bool enqueue_and_echo_command(const char* cmd, bool say_ok=false); // Add a single command to the end of the buffer. Return false on failure.
-void enqueue_and_echo_commands_P(const char * const cmd);          // Set one or more commands to be prioritized over the next Serial/SD command.
+bool enqueue_and_echo_command(const char* cmd);           // Add a single command to the end of the buffer. Return false on failure.
+void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command.
 void clear_command_queue();
 
-extern millis_t previous_cmd_ms;
-inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
-
-#if ENABLED(FAST_PWM_FAN)
-  void setPwmFrequency(uint8_t pin, int val);
+#if ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(POWER_LOSS_RECOVERY)
+  extern char command_queue[BUFSIZE][MAX_CMD_SIZE];
 #endif
 
+#define HAS_LCD_QUEUE_NOW (ENABLED(MALYAN_LCD) || (ENABLED(ULTIPANEL) && (ENABLED(AUTO_BED_LEVELING_UBL) || ENABLED(PID_AUTOTUNE_MENU) || ENABLED(ADVANCED_PAUSE_FEATURE))))
+#define HAS_QUEUE_NOW (ENABLED(SDSUPPORT) || HAS_LCD_QUEUE_NOW)
+#if HAS_QUEUE_NOW
+  // Return only when commands are actually enqueued
+  void enqueue_and_echo_command_now(const char* cmd);
+  #if HAS_LCD_QUEUE_NOW
+    void enqueue_and_echo_commands_now_P(const char * const cmd);
+  #endif
+#endif
+
+extern millis_t previous_move_ms;
+inline void reset_stepper_timeout() { previous_move_ms = millis(); }
+
 /**
  * Feedrate scaling and conversion
  */
 extern float feedrate_mm_s;
 extern int16_t feedrate_percentage;
 
-#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01)
+#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01f)
+
+extern bool axis_relative_modes[XYZE];
+
+extern uint8_t axis_homed, axis_known_position;
+
+constexpr uint8_t xyz_bits = _BV(X_AXIS) | _BV(Y_AXIS) | _BV(Z_AXIS);
+FORCE_INLINE bool all_axes_homed() { return (axis_homed & xyz_bits) == xyz_bits; }
+FORCE_INLINE bool all_axes_known() { return (axis_known_position & xyz_bits) == xyz_bits; }
 
-extern bool axis_relative_modes[];
-extern bool axis_known_position[XYZ];
-extern bool axis_homed[XYZ];
 extern volatile bool wait_for_heatup;
 
 #if HAS_RESUME_CONTINUE
   extern volatile bool wait_for_user;
 #endif
 
+#if HAS_AUTO_REPORTING || ENABLED(HOST_KEEPALIVE_FEATURE)
+  extern bool suspend_auto_report;
+#endif
+
 extern float current_position[XYZE], destination[XYZE];
 
-// Workspace offsets
+/**
+ * Workspace offsets
+ */
 #if HAS_WORKSPACE_OFFSET
   #if HAS_HOME_OFFSET
     extern float home_offset[XYZ];
@@ -234,36 +291,26 @@ extern float current_position[XYZE], destination[XYZE];
   #if HAS_POSITION_SHIFT
     extern float position_shift[XYZ];
   #endif
-#endif
-
-#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
-  extern float workspace_offset[XYZ];
-  #define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
-#elif HAS_HOME_OFFSET
-  #define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
-#elif HAS_POSITION_SHIFT
-  #define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
+  #if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
+    extern float workspace_offset[XYZ];
+    #define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
+  #elif HAS_HOME_OFFSET
+    #define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
+  #elif HAS_POSITION_SHIFT
+    #define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
+  #endif
+  #define NATIVE_TO_LOGICAL(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
+  #define LOGICAL_TO_NATIVE(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS))
 #else
-  #define WORKSPACE_OFFSET(AXIS) 0
+  #define NATIVE_TO_LOGICAL(POS, AXIS) (POS)
+  #define LOGICAL_TO_NATIVE(POS, AXIS) (POS)
 #endif
-
-#define NATIVE_TO_LOGICAL(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
-#define LOGICAL_TO_NATIVE(POS, AXIS) ((POS) - WORKSPACE_OFFSET(AXIS))
-
-#if HAS_POSITION_SHIFT || DISABLED(DELTA)
-  #define LOGICAL_X_POSITION(POS)   NATIVE_TO_LOGICAL(POS, X_AXIS)
-  #define LOGICAL_Y_POSITION(POS)   NATIVE_TO_LOGICAL(POS, Y_AXIS)
-  #define RAW_X_POSITION(POS)       LOGICAL_TO_NATIVE(POS, X_AXIS)
-  #define RAW_Y_POSITION(POS)       LOGICAL_TO_NATIVE(POS, Y_AXIS)
-#else
-  #define LOGICAL_X_POSITION(POS)   (POS)
-  #define LOGICAL_Y_POSITION(POS)   (POS)
-  #define RAW_X_POSITION(POS)       (POS)
-  #define RAW_Y_POSITION(POS)       (POS)
-#endif
-
-#define LOGICAL_Z_POSITION(POS)     NATIVE_TO_LOGICAL(POS, Z_AXIS)
-#define RAW_Z_POSITION(POS)         LOGICAL_TO_NATIVE(POS, Z_AXIS)
+#define LOGICAL_X_POSITION(POS) NATIVE_TO_LOGICAL(POS, X_AXIS)
+#define LOGICAL_Y_POSITION(POS) NATIVE_TO_LOGICAL(POS, Y_AXIS)
+#define LOGICAL_Z_POSITION(POS) NATIVE_TO_LOGICAL(POS, Z_AXIS)
+#define RAW_X_POSITION(POS)     LOGICAL_TO_NATIVE(POS, X_AXIS)
+#define RAW_Y_POSITION(POS)     LOGICAL_TO_NATIVE(POS, Y_AXIS)
+#define RAW_Z_POSITION(POS)     LOGICAL_TO_NATIVE(POS, Z_AXIS)
 
 // Hotend Offsets
 #if HOTENDS > 1
@@ -285,16 +332,24 @@ extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
   void update_software_endstops(const AxisEnum axis);
 #endif
 
+#define MAX_COORDINATE_SYSTEMS 9
 #if ENABLED(CNC_COORDINATE_SYSTEMS)
-  #define MAX_COORDINATE_SYSTEMS 9
   extern float coordinate_system[MAX_COORDINATE_SYSTEMS][XYZ];
   bool select_coordinate_system(const int8_t _new);
 #endif
 
+void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false);
+
+void home_all_axes();
+
 void report_current_position();
 
 #if IS_KINEMATIC
-  extern float delta[ABC];
+  #if ENABLED(HANGPRINTER)
+    extern float line_lengths[ABCD];
+  #else
+    extern float delta[ABC];
+  #endif
   void inverse_kinematics(const float raw[XYZ]);
 #endif
 
@@ -313,25 +368,63 @@ void report_current_position();
   void recalc_delta_settings();
   float delta_safe_distance_from_top();
 
-  #if ENABLED(DELTA_FAST_SQRT)
-    float Q_rsqrt(const float number);
-    #define _SQRT(n) (1.0f / Q_rsqrt(n))
-  #else
-    #define _SQRT(n) SQRT(n)
-  #endif
-
   // Macro to obtain the Z position of an individual tower
-  #define DELTA_Z(T) raw[Z_AXIS] + _SQRT(     \
-    delta_diagonal_rod_2_tower[T] - HYPOT2(   \
-        delta_tower[T][X_AXIS] - raw[X_AXIS], \
-        delta_tower[T][Y_AXIS] - raw[Y_AXIS]  \
-      )                                       \
+  #define DELTA_Z(V,T) V[Z_AXIS] + SQRT(    \
+    delta_diagonal_rod_2_tower[T] - HYPOT2( \
+        delta_tower[T][X_AXIS] - V[X_AXIS], \
+        delta_tower[T][Y_AXIS] - V[Y_AXIS]  \
+      )                                     \
     )
 
-  #define DELTA_RAW_IK() do {        \
-    delta[A_AXIS] = DELTA_Z(A_AXIS); \
-    delta[B_AXIS] = DELTA_Z(B_AXIS); \
-    delta[C_AXIS] = DELTA_Z(C_AXIS); \
+  #define DELTA_IK(V) do {              \
+    delta[A_AXIS] = DELTA_Z(V, A_AXIS); \
+    delta[B_AXIS] = DELTA_Z(V, B_AXIS); \
+    delta[C_AXIS] = DELTA_Z(V, C_AXIS); \
+  }while(0)
+
+#elif ENABLED(HANGPRINTER)
+
+  // Don't collect anchor positions in array because there are no A_x, D_x or D_y
+  extern float anchor_A_y,
+               anchor_A_z,
+               anchor_B_x,
+               anchor_B_y,
+               anchor_B_z,
+               anchor_C_x,
+               anchor_C_y,
+               anchor_C_z,
+               anchor_D_z,
+               delta_segments_per_second,
+               line_lengths_origin[ABCD];
+
+  void recalc_hangprinter_settings();
+
+  #define HANGPRINTER_IK(V) do {                             \
+    line_lengths[A_AXIS] = SQRT(sq(anchor_A_z - V[Z_AXIS])   \
+                              + sq(anchor_A_y - V[Y_AXIS])   \
+                              + sq(             V[X_AXIS])); \
+    line_lengths[B_AXIS] = SQRT(sq(anchor_B_z - V[Z_AXIS])   \
+                              + sq(anchor_B_y - V[Y_AXIS])   \
+                              + sq(anchor_B_x - V[X_AXIS])); \
+    line_lengths[C_AXIS] = SQRT(sq(anchor_C_z - V[Z_AXIS])   \
+                              + sq(anchor_C_y - V[Y_AXIS])   \
+                              + sq(anchor_C_x - V[X_AXIS])); \
+    line_lengths[D_AXIS] = SQRT(sq(             V[X_AXIS])   \
+                              + sq(             V[Y_AXIS])   \
+                              + sq(anchor_D_z - V[Z_AXIS])); \
+  }while(0)
+
+  // Inverse kinematics at origin
+  #define HANGPRINTER_IK_ORIGIN(LL) do { \
+    LL[A_AXIS] = SQRT(sq(anchor_A_z)     \
+                    + sq(anchor_A_y));   \
+    LL[B_AXIS] = SQRT(sq(anchor_B_z)     \
+                    + sq(anchor_B_y)     \
+                    + sq(anchor_B_x));   \
+    LL[C_AXIS] = SQRT(sq(anchor_C_z)     \
+                    + sq(anchor_C_y)     \
+                    + sq(anchor_C_x));   \
+    LL[D_AXIS] = anchor_D_z;             \
   }while(0)
 
 #elif IS_SCARA
@@ -362,9 +455,9 @@ void report_current_position();
   float bilinear_z_offset(const float raw[XYZ]);
 #endif
 
-#if ENABLED(AUTO_BED_LEVELING_UBL)
-  typedef struct { double A, B, D; } linear_fit;
-  linear_fit* lsf_linear_fit(double x[], double y[], double z[], const int);
+#if ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(MESH_BED_LEVELING)
+  typedef float (*element_2d_fn)(const uint8_t, const uint8_t);
+  void print_2d_array(const uint8_t sx, const uint8_t sy, const uint8_t precision, const element_2d_fn fn);
 #endif
 
 #if HAS_LEVELING
@@ -377,18 +470,19 @@ void report_current_position();
   void set_z_fade_height(const float zfh, const bool do_report=true);
 #endif
 
-#if ENABLED(X_DUAL_ENDSTOPS)
-  extern float x_endstop_adj;
-#endif
-#if ENABLED(Y_DUAL_ENDSTOPS)
-  extern float y_endstop_adj;
-#endif
-#if ENABLED(Z_DUAL_ENDSTOPS)
-  extern float z_endstop_adj;
-#endif
-
 #if HAS_BED_PROBE
   extern float zprobe_zoffset;
+  bool set_probe_deployed(const bool deploy);
+  #ifdef Z_AFTER_PROBING
+    void move_z_after_probing();
+  #endif
+  enum ProbePtRaise : unsigned char {
+    PROBE_PT_NONE,  // No raise or stow after run_z_probe
+    PROBE_PT_STOW,  // Do a complete stow after run_z_probe
+    PROBE_PT_RAISE, // Raise to "between" clearance after run_z_probe
+    PROBE_PT_BIG_RAISE  // Raise to big clearance after run_z_probe
+  };
+  float probe_pt(const float &rx, const float &ry, const ProbePtRaise raise_after=PROBE_PT_NONE, const uint8_t verbose_level=0, const bool probe_relative=true);
   #define DEPLOY_PROBE() set_probe_deployed(true)
   #define STOW_PROBE() set_probe_deployed(false)
 #else
@@ -415,6 +509,10 @@ void report_current_position();
   #endif
 #endif
 
+#if ENABLED(USE_CONTROLLER_FAN)
+  extern int controllerFanSpeed;
+#endif
+
 #if ENABLED(BARICUDA)
   extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure;
 #endif
@@ -429,30 +527,16 @@ void report_current_position();
 #endif
 
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
+  extern int8_t did_pause_print;
   extern AdvancedPauseMenuResponse advanced_pause_menu_response;
+  extern float filament_change_unload_length[EXTRUDERS],
+               filament_change_load_length[EXTRUDERS];
 #endif
 
-#if ENABLED(PID_EXTRUSION_SCALING)
-  extern int lpq_len;
-#endif
-
-#if ENABLED(FWRETRACT)
-  extern bool autoretract_enabled;                 // M209 S - Autoretract switch
-  extern float retract_length,                     // M207 S - G10 Retract length
-               retract_feedrate_mm_s,              // M207 F - G10 Retract feedrate
-               retract_zlift,                      // M207 Z - G10 Retract hop size
-               retract_recover_length,             // M208 S - G11 Recover length
-               retract_recover_feedrate_mm_s,      // M208 F - G11 Recover feedrate
-               swap_retract_length,                // M207 W - G10 Swap Retract length
-               swap_retract_recover_length,        // M208 W - G11 Swap Recover length
-               swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate
-#endif
-
-// Print job timer
-#if ENABLED(PRINTCOUNTER)
-  extern PrintCounter print_job_timer;
-#else
-  extern Stopwatch print_job_timer;
+#if HAS_POWER_SWITCH
+  extern bool powersupply_on;
+  #define PSU_PIN_ON()  do{ OUT_WRITE(PS_ON_PIN, PS_ON_AWAKE); powersupply_on = true; }while(0)
+  #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, PS_ON_ASLEEP); powersupply_on = false; }while(0)
 #endif
 
 // Handling multiple extruders pins
@@ -469,10 +553,14 @@ void prepare_move_to_destination();
 /**
  * Blocking movement and shorthand functions
  */
-void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s=0.0);
-void do_blocking_move_to_x(const float &x, const float &fr_mm_s=0.0);
-void do_blocking_move_to_z(const float &z, const float &fr_mm_s=0.0);
-void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s=0.0);
+void do_blocking_move_to(const float rx, const float ry, const float rz, const float &fr_mm_s=0);
+void do_blocking_move_to_x(const float &rx, const float &fr_mm_s=0);
+void do_blocking_move_to_z(const float &rz, const float &fr_mm_s=0);
+void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm_s=0);
+
+#if ENABLED(ARC_SUPPORT)
+  void plan_arc(const float(&cart)[XYZE], const float(&offset)[2], const bool clockwise);
+#endif
 
 #define HAS_AXIS_UNHOMED_ERR (                                                     \
          ENABLED(Z_PROBE_ALLEN_KEY)                                                \
@@ -499,44 +587,61 @@ void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s
     extern const float L1, L2;
   #endif
 
-  inline bool position_is_reachable(const float &rx, const float &ry) {
+  // Return true if the given point is within the printable area
+  inline bool position_is_reachable(const float &rx, const float &ry, const float inset=0) {
     #if ENABLED(DELTA)
-      return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS);
+      return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS - inset);
+    #elif ENABLED(HANGPRINTER)
+      // TODO: This is over simplified. Hangprinter's build volume is _not_ cylindrical.
+      return HYPOT2(rx, ry) <= sq(HANGPRINTER_PRINTABLE_RADIUS - inset);
     #elif IS_SCARA
-      #if MIDDLE_DEAD_ZONE_R > 0
-        const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
-        return R2 >= sq(float(MIDDLE_DEAD_ZONE_R)) && R2 <= sq(L1 + L2);
-      #else
-        return HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y) <= sq(L1 + L2);
-      #endif
-    #else // CARTESIAN
-      // To be migrated from MakerArm branch in future
+      const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
+      return (
+        R2 <= sq(L1 + L2) - inset
+        #if MIDDLE_DEAD_ZONE_R > 0
+          && R2 >= sq(float(MIDDLE_DEAD_ZONE_R))
+        #endif
+      );
     #endif
   }
 
-  inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
-
-    // Both the nozzle and the probe must be able to reach the point.
-    // This won't work on SCARA since the probe offset rotates with the arm.
-
-    return position_is_reachable(rx, ry)
-        && position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER));
-  }
+  #if HAS_BED_PROBE
+    // Return true if the both nozzle and the probe can reach the given point.
+    // Note: This won't work on SCARA since the probe offset rotates with the arm.
+    inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
+      return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER))
+             && position_is_reachable(rx, ry, ABS(MIN_PROBE_EDGE));
+    }
+  #endif
 
 #else // CARTESIAN
 
+   // Return true if the given position is within the machine bounds.
   inline bool position_is_reachable(const float &rx, const float &ry) {
-      // Add 0.001 margin to deal with float imprecision
-      return WITHIN(rx, X_MIN_POS - 0.001, X_MAX_POS + 0.001)
-          && WITHIN(ry, Y_MIN_POS - 0.001, Y_MAX_POS + 0.001);
+    // Add 0.001 margin to deal with float imprecision
+    return WITHIN(rx, X_MIN_POS - 0.001f, X_MAX_POS + 0.001f)
+        && WITHIN(ry, Y_MIN_POS - 0.001f, Y_MAX_POS + 0.001f);
   }
 
-  inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
-      // Add 0.001 margin to deal with float imprecision
-      return WITHIN(rx, MIN_PROBE_X - 0.001, MAX_PROBE_X + 0.001)
-          && WITHIN(ry, MIN_PROBE_Y - 0.001, MAX_PROBE_Y + 0.001);
-  }
+  #if HAS_BED_PROBE
+    /**
+     * Return whether the given position is within the bed, and whether the nozzle
+     * can reach the position required to put the probe at the given position.
+     *
+     * Example: For a probe offset of -10,+10, then for the probe to reach 0,0 the
+     *          nozzle must be be able to reach +10,-10.
+     */
+    inline bool position_is_reachable_by_probe(const float &rx, const float &ry) {
+      return position_is_reachable(rx - (X_PROBE_OFFSET_FROM_EXTRUDER), ry - (Y_PROBE_OFFSET_FROM_EXTRUDER))
+          && WITHIN(rx, MIN_PROBE_X - 0.001f, MAX_PROBE_X + 0.001f)
+          && WITHIN(ry, MIN_PROBE_Y - 0.001f, MAX_PROBE_Y + 0.001f);
+    }
+  #endif
 
 #endif // CARTESIAN
 
+#if !HAS_BED_PROBE
+  FORCE_INLINE bool position_is_reachable_by_probe(const float &rx, const float &ry) { return position_is_reachable(rx, ry); }
+#endif
+
 #endif // MARLIN_H

Marlin/Marlin.ino

@@ -1,72 +1,53 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
+/*
+================================================================================
 
-/**
- * About Marlin
- *
- * This firmware is a mashup between Sprinter and grbl.
- *  - https://github.com/kliment/Sprinter
- *  - https://github.com/simen/grbl/tree
- */
+  Marlin Firmware
 
-#include "MarlinConfig.h"
+  (c) 2011-2018 MarlinFirmware
+  Portions of Marlin are (c) by their respective authors.
+  All code complies with GPLv2 and/or GPLv3
 
-#if ENABLED(ULTRA_LCD)
-  #if ENABLED(LCD_I2C_TYPE_PCF8575)
-    #include <Wire.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
-    #include <Wire.h>
-    #include <LiquidTWI2.h>
-  #elif ENABLED(LCM1602)
-    #include <Wire.h>
-    #include <LCD.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(DOGLCD)
-    #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://github.com/olikraus/U8glib_Arduino)
-  #else
-    #include <LiquidCrystal.h> // library for character LCD
-  #endif
-#endif
+================================================================================
 
-#if HAS_DIGIPOTSS
-  #include <SPI.h>
-#endif
+Greetings! Thank you for choosing Marlin as your 3D printer firmware.
 
-#if ENABLED(DIGIPOT_I2C)
-  #include <Wire.h>
-#endif
+To configure Marlin you must edit Configuration.h and Configuration_adv.h
+located in the root 'Marlin' folder. Check the example_configurations folder to
+see if there's a more suitable starting-point for your specific hardware.
 
-#if ENABLED(HAVE_TMCDRIVER)
-  #include <SPI.h>
-  #include <TMC26XStepper.h>
-#endif
+Before diving in, we recommend the following essential links:
 
-#if ENABLED(HAVE_TMC2130)
-  #include <SPI.h>
-  #include <TMC2130Stepper.h>
-#endif
+Marlin Firmware Official Website
 
-#if ENABLED(HAVE_L6470DRIVER)
-  #include <SPI.h>
-  #include <L6470.h>
-#endif
+  - http://marlinfw.org/
+    The official Marlin Firmware website contains the most up-to-date
+    documentation. Contributions are always welcome!
+
+Configuration
+
+  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+    A good 20-minute overview of Marlin configuration by Tom Sanladerer.
+    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
+    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
+
+  - http://marlinfw.org/docs/configuration/configuration.html
+    Marlin's configuration options are explained in more detail here.
+
+Getting Help
+
+  - http://forums.reprap.org/list.php?415
+    The Marlin Discussion Forum is a great place to get help from other Marlin
+    users who may have experienced similar issues to your own.
+
+  - https://github.com/MarlinFirmware/Marlin/issues
+    With a free GitHub account you can provide us with feedback, bug reports,
+    and feature requests via the Marlin Issue Queue.
+
+Contributing
+
+  - http://marlinfw.org/docs/development/contributing.html
+    If you'd like to contribute to Marlin, read this first!
+
+  - http://marlinfw.org/docs/development/coding_standards.html
+    Before submitting code get to know the Coding Standards.
+*/

Marlin/MarlinConfig.h

@@ -23,20 +23,26 @@
 #ifndef MARLIN_CONFIG_H
 #define MARLIN_CONFIG_H
 
-#include "fastio.h"
-#include "macros.h"
 #include "boards.h"
+#include "macros.h"
 #include "Version.h"
 #include "Configuration.h"
 #include "Conditionals_LCD.h"
-#include "tmc_macros.h"
+#include "drivers.h"
 #include "Configuration_adv.h"
-#include "pins.h"
-#ifndef USBCON
+
+#if USE_MARLINSERIAL
   #define HardwareSerial_h // trick to disable the standard HWserial
 #endif
-#include "Arduino.h"
+
+#include "types.h"
+#include "HAL.h"
+#include "pins.h"
 #include "Conditionals_post.h"
 #include "SanityCheck.h"
+#include "enum.h"
+#include "language.h"
+#include "utility.h"
+#include "serial.h"
 
 #endif // MARLIN_CONFIG_H

Marlin/MarlinSPI.h

@@ -48,7 +48,7 @@ class SPI<MISO_PIN, MOSI_PIN, SCK_PIN> {
     }
     FORCE_INLINE static uint8_t receive() {
       SPDR = 0;
-      for (;!TEST(SPSR, SPIF););
+      while (!TEST(SPSR, SPIF)) { /* nada */ }
       return SPDR;
     }
 

Marlin/MarlinSerial.cpp

@@ -28,13 +28,14 @@
  * Modified 28 September 2010 by Mark Sproul
  * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
  * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
+ * Modified 10 June 2018 by Eduardo José Tagle (See #10991)
  */
 
 // Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
 
 #include "MarlinConfig.h"
 
-#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
+#if USE_MARLINSERIAL && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
 
   #include "MarlinSerial.h"
   #include "Marlin.h"
@@ -55,16 +56,15 @@
     ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
     #if TX_BUFFER_SIZE > 0
       ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
-      static bool _written;
     #endif
+    static bool _written;
   #endif
 
   #if ENABLED(SERIAL_XON_XOFF)
-    constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80;  // XON / XOFF Character was sent
-    constexpr uint8_t XON_XOFF_CHAR_MASK = 0x1F;  // XON / XOFF character to send
+    constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80,  // XON / XOFF Character was sent
+                      XON_XOFF_CHAR_MASK = 0x1F;  // XON / XOFF character to send
     // XON / XOFF character definitions
-    constexpr uint8_t XON_CHAR  = 17;
-    constexpr uint8_t XOFF_CHAR = 19;
+    constexpr uint8_t XON_CHAR  = 17, XOFF_CHAR = 19;
     uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
   #endif
 
@@ -72,209 +72,296 @@
     uint8_t rx_dropped_bytes = 0;
   #endif
 
+  #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
+    uint8_t rx_buffer_overruns = 0;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
+    uint8_t rx_framing_errors = 0;
+  #endif
+
   #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
     ring_buffer_pos_t rx_max_enqueued = 0;
   #endif
 
+  // A SW memory barrier, to ensure GCC does not overoptimize loops
+  #define sw_barrier() asm volatile("": : :"memory");
+
   #if ENABLED(EMERGENCY_PARSER)
+    #include "emergency_parser.h"
+  #endif
 
-    #include "stepper.h"
-    #include "language.h"
+  // "Atomically" read the RX head index value without disabling interrupts:
+  // This MUST be called with RX interrupts enabled, and CAN'T be called
+  // from the RX ISR itself!
+  FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head() {
+    #if RX_BUFFER_SIZE > 256
+      // Keep reading until 2 consecutive reads return the same value,
+      // meaning there was no update in-between caused by an interrupt.
+      // This works because serial RX interrupts happen at a slower rate
+      // than successive reads of a variable, so 2 consecutive reads with
+      // the same value means no interrupt updated it.
+      ring_buffer_pos_t vold, vnew = rx_buffer.head;
+      sw_barrier();
+      do {
+        vold = vnew;
+        vnew = rx_buffer.head;
+        sw_barrier();
+      } while (vold != vnew);
+      return vnew;
+    #else
+      // With an 8bit index, reads are always atomic. No need for special handling
+      return rx_buffer.head;
+    #endif
+  }
 
-    // Currently looking for: M108, M112, M410
-    // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h
+  #if RX_BUFFER_SIZE > 256
+    static volatile bool rx_tail_value_not_stable = false;
+    static volatile uint16_t rx_tail_value_backup = 0;
+  #endif
 
-    FORCE_INLINE void emergency_parser(const unsigned char c) {
+  // Set RX tail index, taking into account the RX ISR could interrupt
+  //  the write to this variable in the middle - So a backup strategy
+  //  is used to ensure reads of the correct values.
+  //    -Must NOT be called from the RX ISR -
+  FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value) {
+    #if RX_BUFFER_SIZE > 256
+      // Store the new value in the backup
+      rx_tail_value_backup = value;
+      sw_barrier();
+      // Flag we are about to change the true value
+      rx_tail_value_not_stable = true;
+      sw_barrier();
+      // Store the new value
+      rx_buffer.tail = value;
+      sw_barrier();
+      // Signal the new value is completely stored into the value
+      rx_tail_value_not_stable = false;
+      sw_barrier();
+    #else
+      rx_buffer.tail = value;
+    #endif
+  }
 
-      static e_parser_state state = state_RESET;
-
-      switch (state) {
-        case state_RESET:
-          switch (c) {
-            case ' ': break;
-            case 'N': state = state_N;      break;
-            case 'M': state = state_M;      break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_N:
-          switch (c) {
-            case '0': case '1': case '2':
-            case '3': case '4': case '5':
-            case '6': case '7': case '8':
-            case '9': case '-': case ' ':   break;
-            case 'M': state = state_M;      break;
-            default:  state = state_IGNORE;
-          }
-          break;
-
-        case state_M:
-          switch (c) {
-            case ' ': break;
-            case '1': state = state_M1;     break;
-            case '4': state = state_M4;     break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_M1:
-          switch (c) {
-            case '0': state = state_M10;    break;
-            case '1': state = state_M11;    break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_M10:
-          state = (c == '8') ? state_M108 : state_IGNORE;
-          break;
-
-        case state_M11:
-          state = (c == '2') ? state_M112 : state_IGNORE;
-          break;
-
-        case state_M4:
-          state = (c == '1') ? state_M41 : state_IGNORE;
-          break;
-
-        case state_M41:
-          state = (c == '0') ? state_M410 : state_IGNORE;
-          break;
-
-        case state_IGNORE:
-          if (c == '\n') state = state_RESET;
-          break;
-
-        default:
-          if (c == '\n') {
-            switch (state) {
-              case state_M108:
-                wait_for_user = wait_for_heatup = false;
-                break;
-              case state_M112:
-                kill(PSTR(MSG_KILLED));
-                break;
-              case state_M410:
-                quickstop_stepper();
-                break;
-              default:
-                break;
-            }
-            state = state_RESET;
-          }
-      }
-    }
-
-  #endif // EMERGENCY_PARSER
+  // Get the RX tail index, taking into account the read could be
+  //  interrupting in the middle of the update of that index value
+  //    -Called from the RX ISR -
+  FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail() {
+    #if RX_BUFFER_SIZE > 256
+      // If the true index is being modified, return the backup value
+      if (rx_tail_value_not_stable) return rx_tail_value_backup;
+    #endif
+    // The true index is stable, return it
+    return rx_buffer.tail;
+  }
 
+  // (called with RX interrupts disabled)
   FORCE_INLINE void store_rxd_char() {
-    const ring_buffer_pos_t h = rx_buffer.head,
-                            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+    // Get the tail - Nothing can alter its value while this ISR is executing, but there's
+    // a chance that this ISR interrupted the main process while it was updating the index.
+    // The backup mechanism ensures the correct value is always returned.
+    const ring_buffer_pos_t t = atomic_read_rx_tail();
+
+    // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
+    ring_buffer_pos_t h = rx_buffer.head;
+
+    // Get the next element
+    ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+
+    // This must read the M_UCSRxA register before reading the received byte to detect error causes
+    #if ENABLED(SERIAL_STATS_DROPPED_RX)
+      if (TEST(M_UCSRxA, M_DORx) && !++rx_dropped_bytes) --rx_dropped_bytes;
+    #endif
+
+    #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
+      if (TEST(M_UCSRxA, M_DORx) && !++rx_buffer_overruns) --rx_buffer_overruns;
+    #endif
+
+    #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
+      if (TEST(M_UCSRxA, M_FEx) && !++rx_framing_errors) --rx_framing_errors;
+    #endif
+
+    // Read the character from the USART
+    uint8_t c = M_UDRx;
+
+    #if ENABLED(EMERGENCY_PARSER)
+      emergency_parser.update(c);
+    #endif
 
     // If the character is to be stored at the index just before the tail
-    // (such that the head would advance to the current tail), the buffer is
-    // critical, so don't write the character or advance the head.
-    const char c = M_UDRx;
-    if (i != rx_buffer.tail) {
+    // (such that the head would advance to the current tail), the RX FIFO is
+    // full, so don't write the character or advance the head.
+    if (i != t) {
       rx_buffer.buffer[h] = c;
-      rx_buffer.head = i;
-    }
-    else {
-      #if ENABLED(SERIAL_STATS_DROPPED_RX)
-        if (!++rx_dropped_bytes) ++rx_dropped_bytes;
-      #endif
+      h = i;
     }
+    #if ENABLED(SERIAL_STATS_DROPPED_RX)
+      else if (!++rx_dropped_bytes) --rx_dropped_bytes;
+    #endif
 
     #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-      // calculate count of bytes stored into the RX buffer
-      ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+      // Calculate count of bytes stored into the RX buffer
+      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+
       // Keep track of the maximum count of enqueued bytes
       NOLESS(rx_max_enqueued, rx_count);
     #endif
 
     #if ENABLED(SERIAL_XON_XOFF)
-
-      // for high speed transfers, we can use XON/XOFF protocol to do
-      // software handshake and avoid overruns.
+      // If the last char that was sent was an XON
       if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
 
-        // calculate count of bytes stored into the RX buffer
-        ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+        // Bytes stored into the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
 
-        // if we are above 12.5% of RX buffer capacity, send XOFF before
-        // we run out of RX buffer space .. We need 325 bytes @ 250kbits/s to
-        // let the host react and stop sending bytes. This translates to 13mS
-        // propagation time.
+        // If over 12.5% of RX buffer capacity, send XOFF before running out of
+        // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
+        // and stop sending bytes. This translates to 13mS propagation time.
         if (rx_count >= (RX_BUFFER_SIZE) / 8) {
-          // If TX interrupts are disabled and data register is empty,
-          // just write the byte to the data register and be done. This
-          // shortcut helps significantly improve the effective datarate
-          // at high (>500kbit/s) bitrates, where interrupt overhead
-          // becomes a slowdown.
-          if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) {
-            // Send an XOFF character
-            M_UDRx = XOFF_CHAR;
-            // clear the TXC bit -- "can be cleared by writing a one to its bit
-            // location". This makes sure flush() won't return until the bytes
-            // actually got written
-            SBI(M_UCSRxA, M_TXCx);
-            // And remember it was sent
-            xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+
+          // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
+          // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
+          // to be in the middle of trying to disable the RX interrupt in the main program, eventually the
+          // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
+          // the sending of the XOFF char is to send it HERE AND NOW.
+
+          // About to send the XOFF char
+          xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+
+          // Wait until the TX register becomes empty and send it - Here there could be a problem
+          // - While waiting for the TX register to empty, the RX register could receive a new
+          //   character. This must also handle that situation!
+          while (!TEST(M_UCSRxA, M_UDREx)) {
+
+            if (TEST(M_UCSRxA,M_RXCx)) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+
+              // Read the character from the USART
+              c = M_UDRx;
+
+              #if ENABLED(EMERGENCY_PARSER)
+                emergency_parser.update(c);
+              #endif
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              #if ENABLED(SERIAL_STATS_DROPPED_RX)
+                else if (!++rx_dropped_bytes) --rx_dropped_bytes;
+              #endif
+            }
+            sw_barrier();
           }
-          else {
-            // TX interrupts disabled, but buffer still not empty ... or
-            // TX interrupts enabled. Reenable TX ints and schedule XOFF
-            // character to be sent
-            #if TX_BUFFER_SIZE > 0
-              SBI(M_UCSRxB, M_UDRIEx);
-              xon_xoff_state = XOFF_CHAR;
-            #else
-              // We are not using TX interrupts, we will have to send this manually
-              while (!TEST(M_UCSRxA, M_UDREx)) {/* nada */}
-              M_UDRx = XOFF_CHAR;
-              // And remember we already sent it
-              xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
-            #endif
+
+          M_UDRx = XOFF_CHAR;
+
+          // Clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          SBI(M_UCSRxA, M_TXCx);
+
+          // At this point there could be a race condition between the write() function
+          // and this sending of the XOFF char. This interrupt could happen between the
+          // wait to be empty TX buffer loop and the actual write of the character. Since
+          // the TX buffer is full because it's sending the XOFF char, the only way to be
+          // sure the write() function will succeed is to wait for the XOFF char to be
+          // completely sent. Since an extra character could be received during the wait
+          // it must also be handled!
+          while (!TEST(M_UCSRxA, M_UDREx)) {
+
+            if (TEST(M_UCSRxA,M_RXCx)) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+
+              // Read the character from the USART
+              c = M_UDRx;
+
+              #if ENABLED(EMERGENCY_PARSER)
+                emergency_parser.update(c);
+              #endif
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              #if ENABLED(SERIAL_STATS_DROPPED_RX)
+                else if (!++rx_dropped_bytes) --rx_dropped_bytes;
+              #endif
+            }
+            sw_barrier();
           }
+
+          // At this point everything is ready. The write() function won't
+          // have any issues writing to the UART TX register if it needs to!
         }
       }
     #endif // SERIAL_XON_XOFF
 
-    #if ENABLED(EMERGENCY_PARSER)
-      emergency_parser(c);
-    #endif
+    // Store the new head value - The main loop will retry until the value is stable
+    rx_buffer.head = h;
   }
 
   #if TX_BUFFER_SIZE > 0
 
+    // (called with TX irqs disabled)
     FORCE_INLINE void _tx_udr_empty_irq(void) {
-      // If interrupts are enabled, there must be more data in the output
-      // buffer.
+
+      // Read positions
+      uint8_t t = tx_buffer.tail;
+      const uint8_t h = tx_buffer.head;
 
       #if ENABLED(SERIAL_XON_XOFF)
-        // Do a priority insertion of an XON/XOFF char, if needed.
-        const uint8_t state = xon_xoff_state;
-        if (!(state & XON_XOFF_CHAR_SENT)) {
-          M_UDRx = state & XON_XOFF_CHAR_MASK;
-          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
+        // If an XON char is pending to be sent, do it now
+        if (xon_xoff_state == XON_CHAR) {
+
+          // Send the character
+          M_UDRx = XON_CHAR;
+
+          // clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          SBI(M_UCSRxA, M_TXCx);
+
+          // Remember we sent it.
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+
+          // If nothing else to transmit, just disable TX interrupts.
+          if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+
+          return;
         }
-        else
       #endif
-      { // Send the next byte
-        const uint8_t t = tx_buffer.tail, c = tx_buffer.buffer[t];
-        tx_buffer.tail = (t + 1) & (TX_BUFFER_SIZE - 1);
-        M_UDRx = c;
+
+      // If nothing to transmit, just disable TX interrupts. This could
+      // happen as the result of the non atomicity of the disabling of RX
+      // interrupts that could end reenabling TX interrupts as a side effect.
+      if (h == t) {
+        CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+        return;
       }
 
-      // clear the TXC bit -- "can be cleared by writing a one to its bit
-      // location". This makes sure flush() won't return until the bytes
-      // actually got written
+      // There is something to TX, Send the next byte
+      const uint8_t c = tx_buffer.buffer[t];
+      t = (t + 1) & (TX_BUFFER_SIZE - 1);
+      M_UDRx = c;
+      tx_buffer.tail = t;
+
+      // Clear the TXC bit (by writing a one to its bit location).
+      // Ensures flush() won't return until the bytes are actually written/
       SBI(M_UCSRxA, M_TXCx);
 
-      // Disable interrupts if the buffer is empty
-      if (tx_buffer.head == tx_buffer.tail)
-        CBI(M_UCSRxB, M_UDRIEx);
+      // Disable interrupts if there is nothing to transmit following this byte
+      if (h == t) CBI(M_UCSRxB, M_UDRIEx); // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
     }
 
     #ifdef M_USARTx_UDRE_vect
@@ -318,8 +405,8 @@
     SBI(M_UCSRxB, M_RXCIEx);
     #if TX_BUFFER_SIZE > 0
       CBI(M_UCSRxB, M_UDRIEx);
-      _written = false;
     #endif
+    _written = false;
   }
 
   void MarlinSerial::end() {
@@ -329,176 +416,179 @@
     CBI(M_UCSRxB, M_UDRIEx);
   }
 
-  void MarlinSerial::checkRx(void) {
-    if (TEST(M_UCSRxA, M_RXCx)) {
-      CRITICAL_SECTION_START;
-        store_rxd_char();
-      CRITICAL_SECTION_END;
-    }
-  }
-
   int MarlinSerial::peek(void) {
-    CRITICAL_SECTION_START;
-      const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
-    CRITICAL_SECTION_END;
-    return v;
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+    return h == t ? -1 : rx_buffer.buffer[t];
   }
 
   int MarlinSerial::read(void) {
-    int v;
-    CRITICAL_SECTION_START;
-      const ring_buffer_pos_t t = rx_buffer.tail;
-      if (rx_buffer.head == t)
-        v = -1;
-      else {
-        v = rx_buffer.buffer[t];
-        rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1);
+    const ring_buffer_pos_t h = atomic_read_rx_head();
 
-        #if ENABLED(SERIAL_XON_XOFF)
-          if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-            // Get count of bytes in the RX buffer
-            ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
-            // When below 10% of RX buffer capacity, send XON before
-            // running out of RX buffer bytes
-            if (rx_count < (RX_BUFFER_SIZE) / 10) {
-              xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-              CRITICAL_SECTION_END;       // End critical section before returning!
-              writeNoHandshake(XON_CHAR);
-              return v;
-            }
-          }
-        #endif
+    // Read the tail. Main thread owns it, so it is safe to directly read it
+    ring_buffer_pos_t t = rx_buffer.tail;
+
+    // If nothing to read, return now
+    if (h == t) return -1;
+
+    // Get the next char
+    const int v = rx_buffer.buffer[t];
+    t = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1);
+
+    // Advance tail - Making sure the RX ISR will always get an stable value, even
+    // if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(t);
+
+    #if ENABLED(SERIAL_XON_XOFF)
+      // If the XOFF char was sent, or about to be sent...
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        // Get count of bytes in the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+        if (rx_count < (RX_BUFFER_SIZE) / 10) {
+          #if TX_BUFFER_SIZE > 0
+            // Signal we want an XON character to be sent.
+            xon_xoff_state = XON_CHAR;
+            // Enable TX ISR. Non atomic, but it will eventually enable them
+            SBI(M_UCSRxB, M_UDRIEx);
+          #else
+            // If not using TX interrupts, we must send the XON char now
+            xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+            while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
+            M_UDRx = XON_CHAR;
+          #endif
+        }
       }
-    CRITICAL_SECTION_END;
+    #endif
+
     return v;
   }
 
   ring_buffer_pos_t MarlinSerial::available(void) {
-    CRITICAL_SECTION_START;
-      const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
-    CRITICAL_SECTION_END;
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
     return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
   }
 
   void MarlinSerial::flush(void) {
-    // Don't change this order of operations. If the RX interrupt occurs between
-    // reading rx_buffer_head and updating rx_buffer_tail, the previous rx_buffer_head
-    // may be written to rx_buffer_tail, making the buffer appear full rather than empty.
-    CRITICAL_SECTION_START;
-      rx_buffer.head = rx_buffer.tail;
-    CRITICAL_SECTION_END;
+
+    // Set the tail to the head:
+    //  - Read the RX head index in a safe way. (See atomic_read_rx_head.)
+    //  - Set the tail, making sure the RX ISR will always get a stable value, even
+    //    if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(atomic_read_rx_head());
 
     #if ENABLED(SERIAL_XON_XOFF)
+      // If the XOFF char was sent, or about to be sent...
       if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-        writeNoHandshake(XON_CHAR);
+        #if TX_BUFFER_SIZE > 0
+          // Signal we want an XON character to be sent.
+          xon_xoff_state = XON_CHAR;
+          // Enable TX ISR. Non atomic, but it will eventually enable it.
+          SBI(M_UCSRxB, M_UDRIEx);
+        #else
+          // If not using TX interrupts, we must send the XON char now
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+          while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
+          M_UDRx = XON_CHAR;
+        #endif
       }
     #endif
   }
 
   #if TX_BUFFER_SIZE > 0
-    uint8_t MarlinSerial::availableForWrite(void) {
-      CRITICAL_SECTION_START;
-        const uint8_t h = tx_buffer.head, t = tx_buffer.tail;
-      CRITICAL_SECTION_END;
-      return (uint8_t)(TX_BUFFER_SIZE + h - t) & (TX_BUFFER_SIZE - 1);
-    }
-
     void MarlinSerial::write(const uint8_t c) {
-      #if ENABLED(SERIAL_XON_XOFF)
-        const uint8_t state = xon_xoff_state;
-        if (!(state & XON_XOFF_CHAR_SENT)) {
-          // Send 2 chars: XON/XOFF, then a user-specified char
-          writeNoHandshake(state & XON_XOFF_CHAR_MASK);
-          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
-        }
-      #endif
-      writeNoHandshake(c);
-    }
-
-    void MarlinSerial::writeNoHandshake(const uint8_t c) {
       _written = true;
-      CRITICAL_SECTION_START;
-        bool emty = (tx_buffer.head == tx_buffer.tail);
-      CRITICAL_SECTION_END;
 
-      // If the buffer and the data register is empty, just write the byte
-      // to the data register and be done. This shortcut helps
-      // significantly improve the effective datarate at high (>
-      // 500kbit/s) bitrates, where interrupt overhead becomes a slowdown.
-      if (emty && TEST(M_UCSRxA, M_UDREx)) {
-        CRITICAL_SECTION_START;
-          M_UDRx = c;
-          SBI(M_UCSRxA, M_TXCx);
-        CRITICAL_SECTION_END;
+      // If the TX interrupts are disabled and the data register
+      // is empty, just write the byte to the data register and
+      // be done. This shortcut helps significantly improve the
+      // effective datarate at high (>500kbit/s) bitrates, where
+      // interrupt overhead becomes a slowdown.
+      // Yes, there is a race condition between the sending of the
+      // XOFF char at the RX ISR, but it is properly handled there
+      if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) {
+        M_UDRx = c;
+
+        // clear the TXC bit -- "can be cleared by writing a one to its bit
+        // location". This makes sure flush() won't return until the bytes
+        // actually got written
+        SBI(M_UCSRxA, M_TXCx);
         return;
       }
+
       const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
 
-      // If the output buffer is full, there's nothing for it other than to
-      // wait for the interrupt handler to empty it a bit
-      while (i == tx_buffer.tail) {
-        if (!TEST(SREG, SREG_I)) {
-          // Interrupts are disabled, so we'll have to poll the data
-          // register empty flag ourselves. If it is set, pretend an
-          // interrupt has happened and call the handler to free up
-          // space for us.
-          if (TEST(M_UCSRxA, M_UDREx))
-            _tx_udr_empty_irq();
-        }
-        else {
-          // nop, the interrupt handler will free up space for us
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Make room by polling if it is possible to transmit, and do so!
+        while (i == tx_buffer.tail) {
+
+          // If we can transmit another byte, do it.
+          if (TEST(M_UCSRxA, M_UDREx)) _tx_udr_empty_irq();
+
+          // Make sure compiler rereads tx_buffer.tail
+          sw_barrier();
         }
       }
+      else {
+        // Interrupts are enabled, just wait until there is space
+        while (i == tx_buffer.tail) { sw_barrier(); }
+      }
 
+      // Store new char. head is always safe to move
       tx_buffer.buffer[tx_buffer.head] = c;
-      { CRITICAL_SECTION_START;
-          tx_buffer.head = i;
-          SBI(M_UCSRxB, M_UDRIEx);
-        CRITICAL_SECTION_END;
-      }
-      return;
+      tx_buffer.head = i;
+
+      // Enable TX ISR - Non atomic, but it will eventually enable TX ISR
+      SBI(M_UCSRxB, M_UDRIEx);
     }
 
     void MarlinSerial::flushTX(void) {
-      // TX
-      // If we have never written a byte, no need to flush. This special
-      // case is needed since there is no way to force the TXC (transmit
-      // complete) bit to 1 during initialization
-      if (!_written)
-        return;
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
 
-      while (TEST(M_UCSRxB, M_UDRIEx) || !TEST(M_UCSRxA, M_TXCx)) {
-        if (!TEST(SREG, SREG_I) && TEST(M_UCSRxB, M_UDRIEx))
-          // Interrupts are globally disabled, but the DR empty
-          // interrupt should be enabled, so poll the DR empty flag to
-          // prevent deadlock
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Wait until everything was transmitted - We must do polling, as interrupts are disabled
+        while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) {
+
+          // If there is more space, send an extra character
           if (TEST(M_UCSRxA, M_UDREx))
             _tx_udr_empty_irq();
+
+          sw_barrier();
+        }
+
       }
-      // If we get here, nothing is queued anymore (DRIE is disabled) and
-      // the hardware finished tranmission (TXC is set).
+      else {
+        // Wait until everything was transmitted
+        while (tx_buffer.head != tx_buffer.tail || !TEST(M_UCSRxA, M_TXCx)) sw_barrier();
+      }
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
     }
 
   #else // TX_BUFFER_SIZE == 0
 
     void MarlinSerial::write(const uint8_t c) {
-      #if ENABLED(SERIAL_XON_XOFF)
-        // Do a priority insertion of an XON/XOFF char, if needed.
-        const uint8_t state = xon_xoff_state;
-        if (!(state & XON_XOFF_CHAR_SENT)) {
-          writeNoHandshake(state & XON_XOFF_CHAR_MASK);
-          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
-        }
-      #endif
-      writeNoHandshake(c);
-    }
-
-    void MarlinSerial::writeNoHandshake(uint8_t c) {
-      while (!TEST(M_UCSRxA, M_UDREx)) {/* nada */}
+      _written = true;
+      while (!TEST(M_UCSRxA, M_UDREx)) sw_barrier();
       M_UDRx = c;
     }
 
+    void MarlinSerial::flushTX(void) {
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
+
+      // Wait until everything was transmitted
+      while (!TEST(M_UCSRxA, M_TXCx)) sw_barrier();
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
+    }
   #endif // TX_BUFFER_SIZE == 0
 
   /**
@@ -522,13 +612,9 @@
   }
 
   void MarlinSerial::print(long n, int base) {
-    if (base == 0)
-      write(n);
+    if (base == 0) write(n);
     else if (base == 10) {
-      if (n < 0) {
-        print('-');
-        n = -n;
-      }
+      if (n < 0) { print('-'); n = -n; }
       printNumber(n, 10);
     }
     else
@@ -646,9 +732,9 @@
   // Preinstantiate
   MarlinSerial customizedSerial;
 
-#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
+#endif // USE_MARLINSERIAL && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
 
 // For AT90USB targets use the UART for BT interfacing
-#if defined(USBCON) && ENABLED(BLUETOOTH)
+#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH)
   HardwareSerial bluetoothSerial;
 #endif

Marlin/MarlinSerial.h

@@ -21,16 +21,16 @@
  */
 
 /**
-  MarlinSerial.h - Hardware serial library for Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+ * MarlinSerial.h - Hardware serial library for Wiring
+ * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+ *
+ * Modified 28 September 2010 by Mark Sproul
+ * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
+ * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
+ */
 
-  Modified 28 September 2010 by Mark Sproul
-  Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
-
-*/
-
-#ifndef MARLINSERIAL_H
-#define MARLINSERIAL_H
+#ifndef _MARLINSERIAL_H_
+#define _MARLINSERIAL_H_
 
 #include "MarlinConfig.h"
 
@@ -60,6 +60,9 @@
 #define M_TXCx             SERIAL_REGNAME(TXC,SERIAL_PORT,)
 #define M_RXCIEx           SERIAL_REGNAME(RXCIE,SERIAL_PORT,)
 #define M_UDREx            SERIAL_REGNAME(UDRE,SERIAL_PORT,)
+#define M_FEx              SERIAL_REGNAME(FE,SERIAL_PORT,)
+#define M_DORx             SERIAL_REGNAME(DOR,SERIAL_PORT,)
+#define M_UPEx             SERIAL_REGNAME(UPE,SERIAL_PORT,)
 #define M_UDRIEx           SERIAL_REGNAME(UDRIE,SERIAL_PORT,)
 #define M_UDRx             SERIAL_REGNAME(UDR,SERIAL_PORT,)
 #define M_UBRRxH           SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
@@ -86,7 +89,7 @@
   #define TX_BUFFER_SIZE 32
 #endif
 
-#ifndef USBCON
+#if USE_MARLINSERIAL
 
   #if RX_BUFFER_SIZE > 256
     typedef uint16_t ring_buffer_pos_t;
@@ -98,11 +101,19 @@
     extern uint8_t rx_dropped_bytes;
   #endif
 
+  #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
+    extern uint8_t rx_buffer_overruns;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
+    extern uint8_t rx_framing_errors;
+  #endif
+
   #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
     extern ring_buffer_pos_t rx_max_enqueued;
   #endif
 
-  class MarlinSerial { //: public Stream
+  class MarlinSerial {
 
     public:
       MarlinSerial() {};
@@ -112,27 +123,25 @@
       static int read(void);
       static void flush(void);
       static ring_buffer_pos_t available(void);
-      static void checkRx(void);
       static void write(const uint8_t c);
-      #if TX_BUFFER_SIZE > 0
-        static uint8_t availableForWrite(void);
-        static void flushTX(void);
-      #endif
-      static void writeNoHandshake(const uint8_t c);
+      static void flushTX(void);
 
       #if ENABLED(SERIAL_STATS_DROPPED_RX)
         FORCE_INLINE static uint32_t dropped() { return rx_dropped_bytes; }
       #endif
 
+      #if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
+        FORCE_INLINE static uint32_t buffer_overruns() { return rx_buffer_overruns; }
+      #endif
+
+      #if ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS)
+        FORCE_INLINE static uint32_t framing_errors() { return rx_framing_errors; }
+      #endif
+
       #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
         FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return rx_max_enqueued; }
       #endif
 
-    private:
-      static void printNumber(unsigned long, const uint8_t);
-      static void printFloat(double, uint8_t);
-
-    public:
       FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
       FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
       FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
@@ -156,15 +165,20 @@
       static void println(unsigned long, int = DEC);
       static void println(double, int = 2);
       static void println(void);
+      operator bool() { return true; }
+
+    private:
+      static void printNumber(unsigned long, const uint8_t);
+      static void printFloat(double, uint8_t);
   };
 
   extern MarlinSerial customizedSerial;
 
-#endif // !USBCON
+#endif // USE_MARLINSERIAL
 
 // Use the UART for Bluetooth in AT90USB configurations
-#if defined(USBCON) && ENABLED(BLUETOOTH)
+#if !USE_MARLINSERIAL && ENABLED(BLUETOOTH)
   extern HardwareSerial bluetoothSerial;
 #endif
 
-#endif // MARLINSERIAL_H
+#endif // _MARLINSERIAL_H_

Marlin/Max7219_Debug_LEDs.cpp

@@ -22,325 +22,569 @@
 
 /**
  * This module is off by default, but can be enabled to facilitate the display of
- * extra debug information during code development. It assumes the existence of a
- * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
- * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
+ * extra debug information during code development.
  *
- * Just connect up +5v and GND to give it power, then connect up the pins assigned
+ * Just connect up 5V and GND to give it power, then connect up the pins assigned
  * in Configuration_adv.h. For example, on the Re-ARM you could use:
  *
  *   #define MAX7219_CLK_PIN   77
  *   #define MAX7219_DIN_PIN   78
  *   #define MAX7219_LOAD_PIN  79
  *
- * Max7219_init() is called automatically at startup, and then there are a number of
+ * send() is called automatically at startup, and then there are a number of
  * support functions available to control the LEDs in the 8x8 grid.
- *
- * void Max7219_init();
- * void Max7219_PutByte(uint8_t data);
- * void Max7219(uint8_t reg, uint8_t data);
- * void Max7219_LED_On(uint8_t col, uint8_t row);
- * void Max7219_LED_Off(uint8_t col, uint8_t row);
- * void Max7219_LED_Toggle(uint8_t col, uint8_t row);
- * void Max7219_Clear_Row(uint8_t row);
- * void Max7219_Clear_Column(uint8_t col);
- * void Max7219_Set_Row(uint8_t row, uint8_t val);
- * void Max7219_Set_2_Rows(uint8_t row, uint16_t val);
- * void Max7219_Set_4_Rows(uint8_t row, uint32_t val);
- * void Max7219_Set_Column(uint8_t col, uint8_t val);
- * void Max7219_idle_tasks();
  */
 
 #include "MarlinConfig.h"
 
 #if ENABLED(MAX7219_DEBUG)
 
+#define MAX7219_ERRORS // Disable to save 406 bytes of Program Memory
+
 #include "Max7219_Debug_LEDs.h"
 
 #include "planner.h"
 #include "stepper.h"
 #include "Marlin.h"
+#include "delay.h"
 
-static uint8_t LEDs[8] = { 0 };
+Max7219 max7219;
+
+uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 };
+
+#define LINE_REG(Q)     (max7219_reg_digit0 + ((Q) & 0x7))
+#if _ROT == 0 || _ROT == 270
+  #define _LED_BIT(Q)   (7 - ((Q) & 0x7))
+  #define _LED_UNIT(Q)  ((Q) & ~0x7)
+#else
+  #define _LED_BIT(Q)   ((Q) & 0x7)
+  #define _LED_UNIT(Q)  ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3)
+#endif
+#if _ROT < 180
+  #define _LED_IND(P,Q) (_LED_UNIT(P) + (Q))
+#else
+  #define _LED_IND(P,Q) (_LED_UNIT(P) + (7 - ((Q) & 0x7)))
+#endif
+#if _ROT == 0 || _ROT == 180
+  #define LED_IND(X,Y)  _LED_IND(X,Y)
+  #define LED_BIT(X,Y)  _LED_BIT(X)
+#elif _ROT == 90 || _ROT == 270
+  #define LED_IND(X,Y)  _LED_IND(Y,X)
+  #define LED_BIT(X,Y)  _LED_BIT(Y)
+#endif
+#define XOR_7219(X,Y) do{ led_line[LED_IND(X,Y)] ^=  _BV(LED_BIT(X,Y)); }while(0)
+#define SET_7219(X,Y) do{ led_line[LED_IND(X,Y)] |=  _BV(LED_BIT(X,Y)); }while(0)
+#define CLR_7219(X,Y) do{ led_line[LED_IND(X,Y)] &= ~_BV(LED_BIT(X,Y)); }while(0)
+#define BIT_7219(X,Y) TEST(led_line[LED_IND(X,Y)], LED_BIT(X,Y))
 
 #ifdef CPU_32_BIT
-  #define MS_DELAY() delayMicroseconds(5)  // 32-bit processors need a delay to stabilize the signal
+  #define SIG_DELAY() DELAY_US(1)   // Approximate a 1µs delay on 32-bit ARM
+  #undef CRITICAL_SECTION_START
+  #undef CRITICAL_SECTION_END
+  #define CRITICAL_SECTION_START NOOP
+  #define CRITICAL_SECTION_END   NOOP
 #else
-  #define MS_DELAY() NOOP
+  #define SIG_DELAY() DELAY_NS(188) // Delay for 0.1875µs (16MHz AVR) or 0.15µs (20MHz AVR)
 #endif
 
-void Max7219_PutByte(uint8_t data) {
-  CRITICAL_SECTION_START
-  for (uint8_t i = 8; i--;) {
-    MS_DELAY();
-    WRITE(MAX7219_CLK_PIN, LOW);       // tick
-    MS_DELAY();
-    WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW);  // send 1 or 0 based on data bit
-    MS_DELAY();
-    WRITE(MAX7219_CLK_PIN, HIGH);      // tock
-    MS_DELAY();
-    data <<= 1;
-  }
-  CRITICAL_SECTION_END
-}
-
-void Max7219(const uint8_t reg, const uint8_t data) {
-  MS_DELAY();
-  CRITICAL_SECTION_START
-  WRITE(MAX7219_LOAD_PIN, LOW);  // begin
-  MS_DELAY();
-  Max7219_PutByte(reg);          // specify register
-  MS_DELAY();
-  Max7219_PutByte(data);         // put data
-  MS_DELAY();
-  WRITE(MAX7219_LOAD_PIN, LOW);  // and tell the chip to load the data
-  MS_DELAY();
-  WRITE(MAX7219_LOAD_PIN, HIGH);
-  CRITICAL_SECTION_END
-  MS_DELAY();
-}
-
-void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
-  if (row > 7 || col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_LED_Set(", (int)row);
-    SERIAL_ECHOPAIR(",", (int)col);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
-  if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
-  Max7219(8 - row, LEDs[row]);
-}
-
-void Max7219_LED_On(const uint8_t col, const uint8_t row) {
-  if (row > 7 || col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_LED_On(", (int)col);
-    SERIAL_ECHOPAIR(",", (int)row);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  Max7219_LED_Set(col, row, true);
-}
-
-void Max7219_LED_Off(const uint8_t col, const uint8_t row) {
-  if (row > 7 || col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_LED_Off(", (int)row);
-    SERIAL_ECHOPAIR(",", (int)col);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  Max7219_LED_Set(col, row, false);
-}
-
-void Max7219_LED_Toggle(const uint8_t col, const uint8_t row) {
-  if (row > 7 || col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_LED_Toggle(", (int)row);
-    SERIAL_ECHOPAIR(",", (int)col);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  if (TEST(LEDs[row], col))
-    Max7219_LED_Off(col, row);
-  else
-    Max7219_LED_On(col, row);
-}
-
-void Max7219_Clear_Column(const uint8_t col) {
-  if (col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_Clear_Column(", (int)col);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  LEDs[col] = 0;
-  Max7219(8 - col, LEDs[col]);
-}
-
-void Max7219_Clear_Row(const uint8_t row) {
-  if (row > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_Clear_Row(", (int)row);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  for (uint8_t c = 0; c <= 7; c++)
-    Max7219_LED_Off(c, row);
-}
-
-void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
-  if (row > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_Set_Row(", (int)row);
-    SERIAL_ECHOPAIR(",", (int)val);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  for (uint8_t b = 0; b <= 7; b++)
-    if (TEST(val, b))
-      Max7219_LED_On(7 - b, row);
-    else
-      Max7219_LED_Off(7 - b, row);
-}
-
-void Max7219_Set_2_Rows(const uint8_t row, const uint16_t val) {
-  if (row > 6) {
-    SERIAL_ECHOPAIR("??? Max7219_Set_2_Rows(", (int)row);
-    SERIAL_ECHOPAIR(",", (int)val);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  Max7219_Set_Row(row + 1, (val >> 8) & 0xFF);
-  Max7219_Set_Row(row + 0, (val     ) & 0xFF);
-}
-
-void Max7219_Set_4_Rows(const uint8_t row, const uint32_t val) {
-  if (row > 4) {
-    SERIAL_ECHOPAIR("??? Max7219_Set_4_Rows(", (int)row);
-    SERIAL_ECHOPAIR(",", (long)val);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  Max7219_Set_Row(row + 3, (val >> 24) & 0xFF);
-  Max7219_Set_Row(row + 2, (val >> 16) & 0xFF);
-  Max7219_Set_Row(row + 1, (val >>  8) & 0xFF);
-  Max7219_Set_Row(row + 0, (val      ) & 0xFF);
-}
-
-void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
-  if (col > 7) {
-    SERIAL_ECHOPAIR("??? Max7219_Column(", (int)col);
-    SERIAL_ECHOPAIR(",", (int)val);
-    SERIAL_ECHOLNPGM(")");
-    return;
-  }
-  LEDs[col] = val;
-  Max7219(8 - col, LEDs[col]);
-}
-
-void Max7219_init() {
-  uint8_t i, x, y;
-
-  SET_OUTPUT(MAX7219_DIN_PIN);
-  SET_OUTPUT(MAX7219_CLK_PIN);
-
-  OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
-  delay(1);
-
-  //initiation of the max 7219
-  Max7219(max7219_reg_scanLimit, 0x07);
-  Max7219(max7219_reg_decodeMode, 0x00);  // using an led matrix (not digits)
-  Max7219(max7219_reg_shutdown, 0x01);    // not in shutdown mode
-  Max7219(max7219_reg_displayTest, 0x00); // no display test
-  Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
-                                               // range: 0x00 to 0x0F
-  for (i = 0; i <= 7; i++) {      // empty registers, turn all LEDs off
-    LEDs[i] = 0x00;
-    Max7219(i + 1, 0);
-  }
-
-  for (x = 0; x <= 7; x++)        // Do an aesthetically pleasing pattern to fully test
-    for (y = 0; y <= 7; y++) {    // the Max7219 module and LEDs. First, turn them
-      Max7219_LED_On(x, y);       // all on.
-      delay(3);
-    }
-
-  for (x = 0; x <= 7; x++)        // Now, turn them all off.
-    for (y = 0; y <= 7; y++) {
-      Max7219_LED_Off(x, y);
-      delay(3);                   // delay() is OK here. Max7219_init() is only called from
-    }                             // setup() and nothing is running yet.
-
-  delay(150);
-
-  for (x = 8; x--;)               // Now, do the same thing from the opposite direction
-    for (y = 0; y <= 7; y++) {
-      Max7219_LED_On(x, y);
-      delay(2);
-    }
-
-  for (x = 8; x--;)
-    for (y = 0; y <= 7; y++) {
-      Max7219_LED_Off(x, y);
-      delay(2);
-    }
+void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) {
+  #if ENABLED(MAX7219_ERRORS)
+    SERIAL_ECHOPGM("??? Max7219::");
+    serialprintPGM(func);
+    SERIAL_CHAR('(');
+    SERIAL_ECHO(v1);
+    if (v2 > 0) SERIAL_ECHOPAIR(", ", v2);
+    SERIAL_CHAR(')');
+    SERIAL_EOL();
+  #else
+    UNUSED(func); UNUSED(v1); UNUSED(v2);
+  #endif
 }
 
 /**
-* These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
-* There is very little CPU burden added to the system by displaying information within the idle()
-* task.
-*
-* But with that said, if your debugging can be facilitated by making calls into the library from
-* other places in the code, feel free to do it.  The CPU burden for a few calls to toggle an LED
-* or clear a row is not very significant.
-*/
-void Max7219_idle_tasks() {
-#if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE
-  CRITICAL_SECTION_START
-  #if MAX7219_DEBUG_STEPPER_HEAD || MAX7219_DEBUG_STEPPER_QUEUE
-    const uint8_t head = planner.block_buffer_head;
+ * Flip the lowest n_bytes of the supplied bits:
+ *  flipped(x, 1) flips the low 8  bits of x.
+ *  flipped(x, 2) flips the low 16 bits of x.
+ *  flipped(x, 3) flips the low 24 bits of x.
+ *  flipped(x, 4) flips the low 32 bits of x.
+ */
+inline uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) {
+  uint32_t mask = 1, outbits = 0;
+  for (uint8_t b = 0; b < n_bytes * 8; b++) {
+    outbits <<= 1;
+    if (bits & mask) outbits |= 1;
+    mask <<= 1;
+  }
+  return outbits;
+}
+
+void Max7219::noop() {
+  CRITICAL_SECTION_START;
+  SIG_DELAY();
+  WRITE(MAX7219_DIN_PIN, LOW);
+  for (uint8_t i = 16; i--;) {
+    SIG_DELAY();
+    WRITE(MAX7219_CLK_PIN, LOW);
+    SIG_DELAY();
+    SIG_DELAY();
+    WRITE(MAX7219_CLK_PIN, HIGH);
+    SIG_DELAY();
+  }
+  CRITICAL_SECTION_END;
+}
+
+void Max7219::putbyte(uint8_t data) {
+  CRITICAL_SECTION_START;
+  for (uint8_t i = 8; i--;) {
+    SIG_DELAY();
+    WRITE(MAX7219_CLK_PIN, LOW);       // tick
+    SIG_DELAY();
+    WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW);  // send 1 or 0 based on data bit
+    SIG_DELAY();
+    WRITE(MAX7219_CLK_PIN, HIGH);      // tock
+    SIG_DELAY();
+    data <<= 1;
+  }
+  CRITICAL_SECTION_END;
+}
+
+void Max7219::pulse_load() {
+  SIG_DELAY();
+  WRITE(MAX7219_LOAD_PIN, LOW);  // tell the chip to load the data
+  SIG_DELAY();
+  WRITE(MAX7219_LOAD_PIN, HIGH);
+  SIG_DELAY();
+}
+
+void Max7219::send(const uint8_t reg, const uint8_t data) {
+  SIG_DELAY();
+  CRITICAL_SECTION_START;
+  SIG_DELAY();
+  putbyte(reg);          // specify register
+  SIG_DELAY();
+  putbyte(data);         // put data
+  CRITICAL_SECTION_END;
+}
+
+// Send out a single native row of bits to all units
+void Max7219::refresh_line(const uint8_t line) {
+  for (uint8_t u = MAX7219_NUMBER_UNITS; u--;)
+    send(LINE_REG(line), led_line[(u << 3) | (line & 0x7)]);
+  pulse_load();
+}
+
+// Send out a single native row of bits to just one unit
+void Max7219::refresh_unit_line(const uint8_t line) {
+  for (uint8_t u = MAX7219_NUMBER_UNITS; u--;)
+    if (u == (line >> 3)) send(LINE_REG(line), led_line[line]); else noop();
+  pulse_load();
+}
+
+void Max7219::set(const uint8_t line, const uint8_t bits) {
+  led_line[line] = bits;
+  refresh_line(line);
+}
+
+#if ENABLED(MAX7219_NUMERIC)
+
+  // Draw an integer with optional leading zeros and optional decimal point
+  void Max7219::print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) {
+    constexpr uint8_t led_numeral[10] = { 0x7E, 0x60, 0x6D, 0x79, 0x63, 0x5B, 0x5F, 0x70, 0x7F, 0x7A },
+                      led_decimal = 0x80, led_minus = 0x01;
+
+    bool blank = false, neg = value < 0;
+    if (neg) value *= -1;
+    while (size--) {
+      const bool minus = neg && blank;
+      if (minus) neg = false;
+      send(
+        max7219_reg_digit0 + start + size,
+        minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00)
+      );
+      pulse_load();  // tell the chips to load the clocked out data
+      value /= 10;
+      if (!value && !leadzero) blank = true;
+      dec = false;
+    }
+  }
+
+  // Draw a float with a decimal point and optional digits
+  void Max7219::print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) {
+    if (pre_size) print(start, value, pre_size, leadzero, !!post_size);
+    if (post_size) {
+      const int16_t after = ABS(value) * (10 ^ post_size);
+      print(start + pre_size, after, post_size, true);
+    }
+  }
+
+#endif // MAX7219_NUMERIC
+
+// Modify a single LED bit and send the changed line
+void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) {
+  if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_set"), x, y);
+  if (BIT_7219(x, y) == on) return;
+  XOR_7219(x, y);
+  refresh_line(LED_IND(x, y));
+}
+
+void Max7219::led_on(const uint8_t x, const uint8_t y) {
+  if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_on"), x, y);
+  led_set(x, y, true);
+}
+
+void Max7219::led_off(const uint8_t x, const uint8_t y) {
+  if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_off"), x, y);
+  led_set(x, y, false);
+}
+
+void Max7219::led_toggle(const uint8_t x, const uint8_t y) {
+  if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_toggle"), x, y);
+  led_set(x, y, !BIT_7219(x, y));
+}
+
+void Max7219::send_row(const uint8_t row) {
+  #if _ROT == 0 || _ROT == 180
+    refresh_line(LED_IND(0, row));
+  #else
+    UNUSED(row);
+    refresh();
   #endif
-  #if MAX7219_DEBUG_STEPPER_TAIL || MAX7219_DEBUG_STEPPER_QUEUE
-    const uint8_t tail = planner.block_buffer_tail;
+}
+
+void Max7219::send_column(const uint8_t col) {
+  #if _ROT == 90 || _ROT == 270
+    refresh_line(LED_IND(col, 0));
+  #else
+    UNUSED(col);
+    refresh();
   #endif
-  CRITICAL_SECTION_END
+}
+
+void Max7219::clear() {
+  ZERO(led_line);
+  refresh();
+}
+
+void Max7219::fill() {
+  memset(led_line, 0xFF, sizeof(led_line));
+  refresh();
+}
+
+void Max7219::clear_row(const uint8_t row) {
+  if (row >= MAX7219_Y_LEDS) return error(PSTR("clear_row"), row);
+  for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) CLR_7219(x, row);
+  send_row(row);
+}
+
+void Max7219::clear_column(const uint8_t col) {
+  if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
+  for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) CLR_7219(col, y);
+  send_column(col);
+}
+
+/**
+ * Plot the low order bits of val to the specified row of the matrix.
+ * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with
+ * one call to the function (if rotated 90° or 180°).
+ */
+void Max7219::set_row(const uint8_t row, const uint32_t val) {
+  if (row >= MAX7219_Y_LEDS) return error(PSTR("set_row"), row);
+  uint32_t mask = _BV32(MAX7219_X_LEDS - 1);
+  for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) {
+    if (val & mask) SET_7219(x, row); else CLR_7219(x, row);
+    mask >>= 1;
+  }
+  send_row(row);
+}
+
+/**
+ * Plot the low order bits of val to the specified column of the matrix.
+ * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with
+ * one call to the function (if rotated 90° or 180°).
+ */
+void Max7219::set_column(const uint8_t col, const uint32_t val) {
+  if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col);
+  uint32_t mask = _BV32(MAX7219_Y_LEDS - 1);
+  for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) {
+    if (val & mask) SET_7219(col, y); else CLR_7219(col, y);
+    mask >>= 1;
+  }
+  send_column(col);
+}
+
+void Max7219::set_rows_16bits(const uint8_t y, uint32_t val) {
+  #if MAX7219_X_LEDS == 8
+    if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_16bits"), y, val);
+    set_row(y + 1, val); val >>= 8;
+    set_row(y + 0, val);
+  #else // at least 16 bits on each row
+    if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_16bits"), y, val);
+    set_row(y, val);
+  #endif
+}
+
+void Max7219::set_rows_32bits(const uint8_t y, uint32_t val) {
+  #if MAX7219_X_LEDS == 8
+    if (y > MAX7219_Y_LEDS - 4) return error(PSTR("set_rows_32bits"), y, val);
+    set_row(y + 3, val); val >>= 8;
+    set_row(y + 2, val); val >>= 8;
+    set_row(y + 1, val); val >>= 8;
+    set_row(y + 0, val);
+  #elif MAX7219_X_LEDS == 16
+    if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_32bits"), y, val);
+    set_row(y + 1, val); val >>= 16;
+    set_row(y + 0, val);
+  #else // at least 24 bits on each row.  In the 3 matrix case, just display the low 24 bits
+    if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_32bits"), y, val);
+    set_row(y, val);
+  #endif
+}
+
+void Max7219::set_columns_16bits(const uint8_t x, uint32_t val) {
+  #if MAX7219_Y_LEDS == 8
+    if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_columns_16bits"), x, val);
+    set_column(x + 0, val); val >>= 8;
+    set_column(x + 1, val);
+  #else // at least 16 bits in each column
+    if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_columns_16bits"), x, val);
+    set_column(x, val);
+  #endif
+}
+
+void Max7219::set_columns_32bits(const uint8_t x, uint32_t val) {
+  #if MAX7219_Y_LEDS == 8
+    if (x > MAX7219_X_LEDS - 4) return error(PSTR("set_rows_32bits"), x, val);
+    set_column(x + 3, val); val >>= 8;
+    set_column(x + 2, val); val >>= 8;
+    set_column(x + 1, val); val >>= 8;
+    set_column(x + 0, val);
+  #elif MAX7219_Y_LEDS == 16
+    if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_rows_32bits"), x, val);
+    set_column(x + 1, val); val >>= 16;
+    set_column(x + 0, val);
+  #else // at least 24 bits on each row.  In the 3 matrix case, just display the low 24 bits
+    if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_rows_32bits"), x, val);
+    set_column(x, val);
+  #endif
+}
+
+// Initialize the Max7219
+void Max7219::register_setup() {
+  for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
+    send(max7219_reg_scanLimit, 0x07);
+  pulse_load();                        // tell the chips to load the clocked out data
+
+  for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
+    send(max7219_reg_decodeMode, 0x00);     // using an led matrix (not digits)
+  pulse_load();                        // tell the chips to load the clocked out data
+
+  for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
+    send(max7219_reg_shutdown, 0x01);       // not in shutdown mode
+  pulse_load();                        // tell the chips to load the clocked out data
+
+  for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
+    send(max7219_reg_displayTest, 0x00);    // no display test
+  pulse_load();                        // tell the chips to load the clocked out data
+
+  for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++)
+    send(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
+                                                 // range: 0x00 to 0x0F
+  pulse_load();                          // tell the chips to load the clocked out data
+}
+
+#ifdef MAX7219_INIT_TEST
+#if MAX7219_INIT_TEST == 2
+
+  void Max7219::spiral(const bool on, const uint16_t del) {
+    constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 };
+    int8_t px = 0, py = 0, dir = 0;
+    for (uint8_t i = MAX7219_X_LEDS * MAX7219_Y_LEDS; i--;) {
+      led_set(px, py, on);
+      delay(del);
+      const int8_t x = px + way[dir], y = py + way[dir + 1];
+      if (!WITHIN(x, 0, MAX7219_X_LEDS-1) || !WITHIN(y, 0, MAX7219_Y_LEDS-1) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7;
+      px += way[dir]; py += way[dir + 1];
+    }
+  }
+
+#else
+
+  void Max7219::sweep(const int8_t dir, const uint16_t ms, const bool on) {
+    uint8_t x = dir > 0 ? 0 : MAX7219_X_LEDS-1;
+    for (uint8_t i = MAX7219_X_LEDS; i--; x += dir) {
+      set_column(x, on ? 0xFFFFFFFF : 0x00000000);
+      delay(ms);
+    }
+  }
+
 #endif
+#endif // MAX7219_INIT_TEST
+
+void Max7219::init() {
+  SET_OUTPUT(MAX7219_DIN_PIN);
+  SET_OUTPUT(MAX7219_CLK_PIN);
+  OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
+  delay(1);
+
+  register_setup();
+
+  for (uint8_t i = 0; i <= 7; i++) {      // Empty registers to turn all LEDs off
+    led_line[i] = 0x00;
+    send(max7219_reg_digit0 + i, 0);
+    pulse_load();                 // tell the chips to load the clocked out data
+  }
+
+  #ifdef MAX7219_INIT_TEST
+    #if MAX7219_INIT_TEST == 2
+      spiral(true, 8);
+      delay(150);
+      spiral(false, 8);
+    #else
+      // Do an aesthetically-pleasing pattern to fully test the Max7219 module and LEDs.
+      // Light up and turn off columns, both forward and backward.
+      sweep(1, 20, true);
+      sweep(1, 20, false);
+      delay(150);
+      sweep(-1, 20, true);
+      sweep(-1, 20, false);
+    #endif
+  #endif
+}
+
+/**
+ * This code demonstrates some simple debugging using a single 8x8 LED Matrix. If your feature could
+ * benefit from matrix display, add its code here. Very little processing is required, so the 7219 is
+ * ideal for debugging when realtime feedback is important but serial output can't be used.
+ */
+
+// Apply changes to update a marker
+void Max7219::mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) {
+  #if MAX7219_X_LEDS == 8
+    #if MAX7219_Y_LEDS == 8
+      led_off(v1 & 0x7, y + (v1 >= 8));
+       led_on(v2 & 0x7, y + (v2 >= 8));
+    #else
+      led_off(y, v1 & 0xF); // At least 16 LEDs down. Use a single column.
+       led_on(y, v2 & 0xF);
+    #endif
+  #else
+    led_off(v1 & 0xF, y);   // At least 16 LEDs across. Use a single row.
+     led_on(v2 & 0xF, y);
+  #endif
+}
+
+// Apply changes to update a tail-to-head range
+void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) {
+  #if MAX7219_X_LEDS == 8
+    #if MAX7219_Y_LEDS == 8
+      if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
+        led_off(n & 0x7, y + (n >= 8));
+      if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
+         led_on(n & 0x7, y + (n >= 8));
+    #else // The Max7219 Y-Axis has at least 16 LED's.  So use a single column
+      if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
+        led_off(y, n & 0xF);
+      if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
+         led_on(y, n & 0xF);
+    #endif
+  #else   // LED matrix has at least 16 LED's on the X-Axis.  Use single line of LED's
+    if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF)
+      led_off(n & 0xF, y);
+    if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF)
+       led_on(n & 0xF, y);
+ #endif
+}
+
+// Apply changes to update a quantity
+void Max7219::quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) {
+  for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++)
+    #if MAX7219_X_LEDS == 8
+      #if MAX7219_Y_LEDS == 8
+        led_set(i >> 1, y + (i & 1), nv >= ov); // single 8x8 LED matrix.  Use two lines to get 16 LED's
+      #else
+        led_set(y, i, nv >= ov);                // The Max7219 Y-Axis has at least 16 LED's.  So use a single column
+      #endif
+    #else
+      led_set(i, y, nv >= ov);                // LED matrix has at least 16 LED's on the X-Axis.  Use single line of LED's
+    #endif
+}
+
+void Max7219::idle_tasks() {
+  #define MAX7219_USE_HEAD (defined(MAX7219_DEBUG_PLANNER_HEAD) || defined(MAX7219_DEBUG_PLANNER_QUEUE))
+  #define MAX7219_USE_TAIL (defined(MAX7219_DEBUG_PLANNER_TAIL) || defined(MAX7219_DEBUG_PLANNER_QUEUE))
+  #if MAX7219_USE_HEAD || MAX7219_USE_TAIL
+    CRITICAL_SECTION_START;
+    #if MAX7219_USE_HEAD
+      const uint8_t head = planner.block_buffer_head;
+    #endif
+    #if MAX7219_USE_TAIL
+      const uint8_t tail = planner.block_buffer_tail;
+    #endif
+    CRITICAL_SECTION_END;
+  #endif
 
   #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
+    static uint8_t refresh_cnt; // = 0
+    constexpr uint16_t refresh_limit = 5;
     static millis_t next_blink = 0;
-    if (ELAPSED(millis(), next_blink)) {
-      Max7219_LED_Toggle(7, 7);
-      next_blink = millis() + 750;
+    const millis_t ms = millis();
+    const bool do_blink = ELAPSED(ms, next_blink);
+  #else
+    static uint16_t refresh_cnt; // = 0
+    constexpr bool do_blink = true;
+    constexpr uint16_t refresh_limit = 50000;
+  #endif
+
+  // Some Max7219 units are vulnerable to electrical noise, especially
+  // with long wires next to high current wires. If the display becomes
+  // corrupted, this will fix it within a couple seconds.
+  if (do_blink && ++refresh_cnt >= refresh_limit) {
+    refresh_cnt = 0;
+    register_setup();
+  }
+
+  #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
+    if (do_blink) {
+      led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1);
+      next_blink = ms + 1000;
     }
   #endif
 
-  #ifdef MAX7219_DEBUG_STEPPER_HEAD
-    static int16_t last_head_cnt = 0;
-    if (last_head_cnt != head) {
-      if (last_head_cnt < 8)
-        Max7219_LED_Off(last_head_cnt, MAX7219_DEBUG_STEPPER_HEAD);
-      else
-        Max7219_LED_Off(last_head_cnt - 8, MAX7219_DEBUG_STEPPER_HEAD + 1);
+  #if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL
 
+    static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF;
+
+    if (last_head_cnt != head || last_tail_cnt != tail) {
+      range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head);
       last_head_cnt = head;
-      if (head < 8)
-        Max7219_LED_On(head, MAX7219_DEBUG_STEPPER_HEAD);
-      else
-        Max7219_LED_On(head - 8, MAX7219_DEBUG_STEPPER_HEAD + 1);
-    }
-  #endif
-
-  #ifdef MAX7219_DEBUG_STEPPER_TAIL
-    static int16_t last_tail_cnt = 0;
-    if (last_tail_cnt != tail) {
-      if (last_tail_cnt < 8)
-        Max7219_LED_Off(last_tail_cnt, MAX7219_DEBUG_STEPPER_TAIL);
-      else
-        Max7219_LED_Off(last_tail_cnt - 8, MAX7219_DEBUG_STEPPER_TAIL + 1);
-
       last_tail_cnt = tail;
-      if (tail < 8)
-        Max7219_LED_On(tail, MAX7219_DEBUG_STEPPER_TAIL);
-      else
-        Max7219_LED_On(tail - 8, MAX7219_DEBUG_STEPPER_TAIL + 1);
     }
+
+  #else
+
+    #ifdef MAX7219_DEBUG_PLANNER_HEAD
+      static int16_t last_head_cnt = 0x1;
+      if (last_head_cnt != head) {
+        mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head);
+        last_head_cnt = head;
+      }
+    #endif
+
+    #ifdef MAX7219_DEBUG_PLANNER_TAIL
+      static int16_t last_tail_cnt = 0x1;
+      if (last_tail_cnt != tail) {
+        mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail);
+        last_tail_cnt = tail;
+      }
+    #endif
+
   #endif
 
-  #ifdef MAX7219_DEBUG_STEPPER_QUEUE
+  #ifdef MAX7219_DEBUG_PLANNER_QUEUE
     static int16_t last_depth = 0;
-    int16_t current_depth = head - tail;
-    if (current_depth != last_depth) {  // usually, no update will be needed.
-      if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
-      NOMORE(current_depth, BLOCK_BUFFER_SIZE);
-      NOMORE(current_depth, 16);        // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
-                                        // of LEDs is enough to see if the buffer is draining
-
-      const uint8_t st = min(current_depth, last_depth),
-                    en = max(current_depth, last_depth);
-      if (current_depth < last_depth)
-        for (uint8_t i = st; i <= en; i++)   // clear the highest order LEDs
-          Max7219_LED_Off(i / 2, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
-      else
-        for (uint8_t i = st; i <= en; i++)   // set the LEDs to current depth
-          Max7219_LED_On(i / 2, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
-
+    const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF;
+    if (current_depth != last_depth) {
+      quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth);
       last_depth = current_depth;
     }
   #endif

Marlin/Max7219_Debug_LEDs.h

@@ -22,41 +22,45 @@
 
 /**
  * This module is off by default, but can be enabled to facilitate the display of
- * extra debug information during code development. It assumes the existence of a
- * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
- * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
+ * extra debug information during code development.
  *
- * Just connect up +5v and GND to give it power, then connect up the pins assigned
+ * Just connect up 5V and GND to give it power, then connect up the pins assigned
  * in Configuration_adv.h. For example, on the Re-ARM you could use:
  *
  *   #define MAX7219_CLK_PIN   77
  *   #define MAX7219_DIN_PIN   78
  *   #define MAX7219_LOAD_PIN  79
  *
- * Max7219_init() is called automatically at startup, and then there are a number of
+ * max7219.init() is called automatically at startup, and then there are a number of
  * support functions available to control the LEDs in the 8x8 grid.
  *
- * void Max7219_init();
- * void Max7219_PutByte(uint8_t data);
- * void Max7219(uint8_t reg, uint8_t data);
- * void Max7219_LED_Set(uint8_t row, uint8_t col, bool on);
- * void Max7219_LED_On(uint8_t col, uint8_t row);
- * void Max7219_LED_Off(uint8_t col, uint8_t row);
- * void Max7219_LED_Toggle(uint8_t row, uint8_t col);
- * void Max7219_Clear_Row(uint8_t row);
- * void Max7219_Clear_Column(uint8_t col);
- * void Max7219_Set_Row(uint8_t row, uint8_t val);
- * void Max7219_Set_2_Rows(uint8_t row, uint16_t val);
- * void Max7219_Set_4_Rows(uint8_t row, uint32_t val);
- * void Max7219_Set_Column(uint8_t col, uint8_t val);
- * void Max7219_idle_tasks();
+ * If you are using the Max7219 matrix for firmware debug purposes in time sensitive
+ * areas of the code, please be aware that the orientation (rotation) of the display can
+ * affect the speed.   The Max7219 can update a single column fairly fast.  It is much
+ * faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do
+ * a Max7219_Set_Row().    The opposite is true for rotations of 0 or 180 degrees.
  */
+#pragma once
 
-#ifndef __MAX7219_DEBUG_LEDS_H__
-#define __MAX7219_DEBUG_LEDS_H__
+#ifndef MAX7219_ROTATE
+  #define MAX7219_ROTATE 0
+#endif
+#define _ROT ((MAX7219_ROTATE + 360) % 360)
+
+#define MAX7219_LINES (8 * (MAX7219_NUMBER_UNITS))
+
+#if _ROT == 0 || _ROT == 180
+  #define MAX7219_Y_LEDS          8
+  #define MAX7219_X_LEDS          MAX7219_LINES
+#elif _ROT == 90 || _ROT == 270
+  #define MAX7219_X_LEDS          8
+  #define MAX7219_Y_LEDS          MAX7219_LINES
+#else
+  #error "MAX7219_ROTATE must be a multiple of +/- 90°."
+#endif
 
 //
-// define max7219 registers
+// MAX7219 registers
 //
 #define max7219_reg_noop        0x00
 #define max7219_reg_digit0      0x01
@@ -68,23 +72,83 @@
 #define max7219_reg_digit6      0x07
 #define max7219_reg_digit7      0x08
 
-#define max7219_reg_intensity   0x0A
-#define max7219_reg_displayTest 0x0F
 #define max7219_reg_decodeMode  0x09
+#define max7219_reg_intensity   0x0A
 #define max7219_reg_scanLimit   0x0B
 #define max7219_reg_shutdown    0x0C
+#define max7219_reg_displayTest 0x0F
 
-void Max7219_init();
-void Max7219_PutByte(uint8_t data);
-void Max7219(const uint8_t reg, const uint8_t data);
-void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on);
-void Max7219_LED_On(const uint8_t row, const uint8_t col);
-void Max7219_LED_Off(const uint8_t row, const uint8_t col);
-void Max7219_LED_Toggle(const uint8_t row, const uint8_t col);
-void Max7219_Clear_Row(const uint8_t row);
-void Max7219_Clear_Column(const uint8_t col);
-void Max7219_Set_Row(const uint8_t row, const uint8_t val);
-void Max7219_Set_Column(const uint8_t col, const uint8_t val);
-void Max7219_idle_tasks();
+class Max7219 {
+public:
+  static uint8_t led_line[MAX7219_LINES];
 
-#endif // __MAX7219_DEBUG_LEDS_H__
+  Max7219() { }
+
+  static void init();
+  static void register_setup();
+  static void putbyte(uint8_t data);
+  static void pulse_load();
+
+  // Set a single register (e.g., a whole native row)
+  static void send(const uint8_t reg, const uint8_t data);
+
+  // Refresh all units
+  inline static void refresh() { for (uint8_t i = 0; i < 8; i++) refresh_line(i); }
+
+  // Update a single native line on all units
+  static void refresh_line(const uint8_t line);
+
+  // Update a single native line on just one unit
+  static void refresh_unit_line(const uint8_t line);
+
+  // Set a single LED by XY coordinate
+  static void led_set(const uint8_t x, const uint8_t y, const bool on);
+  static void led_on(const uint8_t x, const uint8_t y);
+  static void led_off(const uint8_t x, const uint8_t y);
+  static void led_toggle(const uint8_t x, const uint8_t y);
+
+  // Set all LEDs in a single column
+  static void set_column(const uint8_t col, const uint32_t val);
+  static void clear_column(const uint8_t col);
+
+  // Set all LEDs in a single row
+  static void set_row(const uint8_t row, const uint32_t val);
+  static void clear_row(const uint8_t row);
+
+  // 16 and 32 bit versions of Row and Column functions
+  // Multiple rows and columns will be used to display the value if
+  // the array of matrix LED's is too narrow to accomplish the goal
+  static void set_rows_16bits(const uint8_t y, uint32_t val);
+  static void set_rows_32bits(const uint8_t y, uint32_t val);
+  static void set_columns_16bits(const uint8_t x, uint32_t val);
+  static void set_columns_32bits(const uint8_t x, uint32_t val);
+
+  // Quickly clear the whole matrix
+  static void clear();
+
+  // Quickly fill the whole matrix
+  static void fill();
+
+  // Apply custom code to update the matrix
+  static void idle_tasks();
+
+private:
+  static void error(const char * const func, const int32_t v1, const int32_t v2=-1);
+  static void noop();
+  static void set(const uint8_t line, const uint8_t bits);
+  static void send_row(const uint8_t row);
+  static void send_column(const uint8_t col);
+  static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2);
+  static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh);
+  static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv);
+
+  #ifdef MAX7219_INIT_TEST
+  #if MAX7219_INIT_TEST == 2
+    static void spiral(const bool on, const uint16_t del);
+  #else
+    static void sweep(const int8_t dir, const uint16_t ms, const bool on);
+  #endif
+  #endif
+};
+
+extern Max7219 max7219;

Marlin/Sd2Card.cpp

@@ -297,7 +297,7 @@ bool Sd2Card::eraseSingleBlockEnable() {
  * \return true for success, false for failure.
  * The reason for failure can be determined by calling errorCode() and errorData().
  */
-bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
+bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) {
   errorCode_ = type_ = 0;
   chipSelectPin_ = chipSelectPin;
   // 16-bit init start time allows over a minute
@@ -399,27 +399,28 @@ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
 
   #if ENABLED(SD_CHECK_AND_RETRY)
     uint8_t retryCnt = 3;
-    for(;;) {
+    for (;;) {
       if (cardCommand(CMD17, blockNumber))
         error(SD_CARD_ERROR_CMD17);
       else if (readData(dst, 512))
         return true;
 
+      chipSelectHigh();
       if (!--retryCnt) break;
 
-      chipSelectHigh();
       cardCommand(CMD12, 0); // Try sending a stop command, ignore the result.
       errorCode_ = 0;
     }
+    return false;
   #else
-    if (cardCommand(CMD17, blockNumber))
+    if (cardCommand(CMD17, blockNumber)) {
       error(SD_CARD_ERROR_CMD17);
+      chipSelectHigh();
+      return false;
+    }
     else
       return readData(dst, 512);
   #endif
-
-  chipSelectHigh();
-  return false;
 }
 
 /**

Marlin/Sd2Card.h

@@ -140,7 +140,7 @@ class Sd2Card {
    * \return true for success or false for failure.
    */
   bool init(uint8_t sckRateID = SPI_FULL_SPEED,
-            uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
+            pin_t chipSelectPin = SD_CHIP_SELECT_PIN);
   bool readBlock(uint32_t block, uint8_t* dst);
 
   /**

Marlin/SdBaseFile.cpp

@@ -339,38 +339,38 @@ int8_t SdBaseFile::lsPrintNext(uint8_t flags, uint8_t indent) {
         && DIR_IS_FILE_OR_SUBDIR(&dir)) break;
   }
   // indent for dir level
-  for (uint8_t i = 0; i < indent; i++) MYSERIAL.write(' ');
+  for (uint8_t i = 0; i < indent; i++) SERIAL_CHAR(' ');
 
   // print name
   for (uint8_t i = 0; i < 11; i++) {
     if (dir.name[i] == ' ')continue;
     if (i == 8) {
-      MYSERIAL.write('.');
+      SERIAL_CHAR('.');
       w++;
     }
-    MYSERIAL.write(dir.name[i]);
+    SERIAL_CHAR(dir.name[i]);
     w++;
   }
   if (DIR_IS_SUBDIR(&dir)) {
-    MYSERIAL.write('/');
+    SERIAL_CHAR('/');
     w++;
   }
   if (flags & (LS_DATE | LS_SIZE)) {
-    while (w++ < 14) MYSERIAL.write(' ');
+    while (w++ < 14) SERIAL_CHAR(' ');
   }
   // print modify date/time if requested
   if (flags & LS_DATE) {
-    MYSERIAL.write(' ');
+    SERIAL_CHAR(' ');
     printFatDate(dir.lastWriteDate);
-    MYSERIAL.write(' ');
+    SERIAL_CHAR(' ');
     printFatTime(dir.lastWriteTime);
   }
   // print size if requested
   if (!DIR_IS_SUBDIR(&dir) && (flags & LS_SIZE)) {
-    MYSERIAL.write(' ');
-    MYSERIAL.print(dir.fileSize);
+    SERIAL_CHAR(' ');
+    SERIAL_ECHO(dir.fileSize);
   }
-  MYSERIAL.println();
+  SERIAL_EOL();
   return DIR_IS_FILE(&dir) ? 1 : 2;
 }
 
@@ -601,7 +601,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t ofla
   // search for file
 
   while (dirFile->curPosition_ < dirFile->fileSize_) {
-    index = 0XF & (dirFile->curPosition_ >> 5);
+    index = 0xF & (dirFile->curPosition_ >> 5);
     p = dirFile->readDirCache();
     if (!p) return false;
 
@@ -705,7 +705,7 @@ bool SdBaseFile::open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag) {
     return false;
   }
   // open cached entry
-  return openCachedEntry(index & 0XF, oflag);
+  return openCachedEntry(index & 0xF, oflag);
 }
 
 // open a cached directory entry. Assumes vol_ is initialized
@@ -775,7 +775,7 @@ bool SdBaseFile::openNext(SdBaseFile* dirFile, uint8_t oflag) {
   vol_ = dirFile->vol_;
 
   while (1) {
-    index = 0XF & (dirFile->curPosition_ >> 5);
+    index = 0xF & (dirFile->curPosition_ >> 5);
 
     // read entry into cache
     p = dirFile->readDirCache();
@@ -902,11 +902,10 @@ int SdBaseFile::peek() {
   return c;
 }
 
-
 // print uint8_t with width 2
-static void print2u(uint8_t v) {
-  if (v < 10) MYSERIAL.write('0');
-  MYSERIAL.print(v, DEC);
+static void print2u(const uint8_t v) {
+  if (v < 10) SERIAL_CHAR('0');
+  SERIAL_ECHO_F(v, DEC);
 }
 
 /**
@@ -927,10 +926,10 @@ static void print2u(uint8_t v) {
  * \param[in] fatDate The date field from a directory entry.
  */
 void SdBaseFile::printFatDate(uint16_t fatDate) {
-  MYSERIAL.print(FAT_YEAR(fatDate));
-  MYSERIAL.write('-');
+  SERIAL_ECHO(FAT_YEAR(fatDate));
+  SERIAL_CHAR('-');
   print2u(FAT_MONTH(fatDate));
-  MYSERIAL.write('-');
+  SERIAL_CHAR('-');
   print2u(FAT_DAY(fatDate));
 }
 
@@ -945,9 +944,9 @@ void SdBaseFile::printFatDate(uint16_t fatDate) {
  */
 void SdBaseFile::printFatTime(uint16_t fatTime) {
   print2u(FAT_HOUR(fatTime));
-  MYSERIAL.write(':');
+  SERIAL_CHAR(':');
   print2u(FAT_MINUTE(fatTime));
-  MYSERIAL.write(':');
+  SERIAL_CHAR(':');
   print2u(FAT_SECOND(fatTime));
 }
 
@@ -959,7 +958,7 @@ void SdBaseFile::printFatTime(uint16_t fatTime) {
 bool SdBaseFile::printName() {
   char name[FILENAME_LENGTH];
   if (!getFilename(name)) return false;
-  MYSERIAL.print(name);
+  SERIAL_ECHO(name);
   return true;
 }
 
@@ -1055,8 +1054,9 @@ int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
   // if not a directory file or miss-positioned return an error
   if (!isDir() || (0x1F & curPosition_)) return -1;
 
-  //If we have a longFilename buffer, mark it as invalid. If we find a long filename it will be filled automaticly.
-  if (longFilename != NULL) longFilename[0] = '\0';
+  // If we have a longFilename buffer, mark it as invalid.
+  // If a long filename is found it will be filled automatically.
+  if (longFilename) longFilename[0] = '\0';
 
   while (1) {
 
@@ -1066,12 +1066,15 @@ int8_t SdBaseFile::readDir(dir_t* dir, char* longFilename) {
     // last entry if DIR_NAME_FREE
     if (dir->name[0] == DIR_NAME_FREE) return 0;
 
-    // skip empty entries and entry for .  and ..
-    if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') continue;
+    // skip deleted entry and entry for .  and ..
+    if (dir->name[0] == DIR_NAME_DELETED || dir->name[0] == '.') {
+      if (longFilename) longFilename[0] = '\0';     // Invalidate erased file long name, if any
+      continue;
+    }
 
     // Fill the long filename if we have a long filename entry.
     // Long filename entries are stored before the short filename.
-    if (longFilename != NULL && DIR_IS_LONG_NAME(dir)) {
+    if (longFilename && DIR_IS_LONG_NAME(dir)) {
       vfat_t* VFAT = (vfat_t*)dir;
       // Sanity-check the VFAT entry. The first cluster is always set to zero. And the sequence number should be higher than 0
       if (VFAT->firstClusterLow == 0) {
@@ -1100,7 +1103,7 @@ dir_t* SdBaseFile::readDirCache() {
   if (!isDir()) return 0;
 
   // index of entry in cache
-  i = (curPosition_ >> 5) & 0XF;
+  i = (curPosition_ >> 5) & 0xF;
 
   // use read to locate and cache block
   if (read() < 0) return 0;
@@ -1722,8 +1725,4 @@ int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) {
   return -1;
 }
 
-#if ALLOW_DEPRECATED_FUNCTIONS
-  void (*SdBaseFile::oldDateTime_)(uint16_t &date, uint16_t &time) = 0;
-#endif
-
 #endif // SDSUPPORT

Marlin/SdBaseFile.h

@@ -37,6 +37,8 @@
 #include "SdFatConfig.h"
 #include "SdVolume.h"
 
+#include <stdint.h>
+
 /**
  * \struct filepos_t
  * \brief internal type for istream
@@ -383,119 +385,6 @@ class SdBaseFile {
   bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
   bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
   dir_t* readDirCache();
-
-// Deprecated functions
-#if ALLOW_DEPRECATED_FUNCTIONS
- public:
-
-  /**
-   * \deprecated Use:
-   * bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
-   * \param[out] bgnBlock the first block address for the file.
-   * \param[out] endBlock the last  block address for the file.
-   * \return true for success or false for failure.
-   */
-  bool contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) {
-    return contiguousRange(&bgnBlock, &endBlock);
-  }
-
-  /**
-   * \deprecated Use:
-   * bool createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size)
-   * \param[in] dirFile The directory where the file will be created.
-   * \param[in] path A path with a valid DOS 8.3 file name.
-   * \param[in] size The desired file size.
-   * \return true for success or false for failure.
-   */
-  bool createContiguous(SdBaseFile& dirFile, const char* path, uint32_t size) {
-    return createContiguous(&dirFile, path, size);
-  }
-
-  /**
-   * \deprecated Use:
-   * static void dateTimeCallback(
-   *   void (*dateTime)(uint16_t* date, uint16_t* time));
-   * \param[in] dateTime The user's call back function.
-   */
-  static void dateTimeCallback(
-    void (*dateTime)(uint16_t &date, uint16_t &time)) {
-    oldDateTime_ = dateTime;
-    dateTime_ = dateTime ? oldToNew : 0;
-  }
-
-  /**
-   * \deprecated Use:
-   * bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag);
-   * \param[in] dirFile An open SdFat instance for the directory containing the
-   * file to be opened.
-   * \param[in] path A path with a valid 8.3 DOS name for the file.
-   * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
-   * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, const char* path, uint8_t oflag) {
-    return open(&dirFile, path, oflag);
-  }
-
-  /**
-   * \deprecated  Do not use in new apps
-   * \param[in] dirFile An open SdFat instance for the directory containing the
-   * file to be opened.
-   * \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, const char* path) {
-    return open(dirFile, path, O_RDWR);
-  }
-
-  /**
-   * \deprecated Use:
-   * bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag);
-   * \param[in] dirFile An open SdFat instance for the directory.
-   * \param[in] index The \a index of the directory entry for the file to be
-   * opened.  The value for \a index is (directory file position)/32.
-   * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
-   * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, uint16_t index, uint8_t oflag) {
-    return open(&dirFile, index, oflag);
-  }
-
-  /**
-   * \deprecated Use: bool openRoot(SdVolume* vol);
-   * \param[in] vol The FAT volume containing the root directory to be opened.
-   * \return true for success or false for failure.
-   */
-  bool openRoot(SdVolume& vol) { return openRoot(&vol); }
-
-  /**
-   * \deprecated Use: int8_t readDir(dir_t* dir);
-   * \param[out] dir The dir_t struct that will receive the data.
-   * \return bytes read for success zero for eof or -1 for failure.
-   */
-  int8_t readDir(dir_t& dir, char* longFilename) {
-    return readDir(&dir, longFilename);
-  }
-
-  /**
-   * \deprecated Use:
-   * static uint8_t remove(SdBaseFile* dirFile, const char* path);
-   * \param[in] dirFile The directory that contains the file.
-   * \param[in] path The name of the file to be removed.
-   * \return true for success or false for failure.
-   */
-  static bool remove(SdBaseFile& dirFile, const char* path) { return remove(&dirFile, path); }
-
- private:
-  static void (*oldDateTime_)(uint16_t &date, uint16_t &time);
-  static void oldToNew(uint16_t * const date, uint16_t * const time) {
-    uint16_t d, t;
-    oldDateTime_(d, t);
-    *date = d;
-    *time = t;
-  }
-#endif  // ALLOW_DEPRECATED_FUNCTIONS
 };
 
 #endif // _SDBASEFILE_H_

Marlin/SdFatConfig.h

@@ -61,11 +61,6 @@
  */
 #define ENDL_CALLS_FLUSH 0
 
-/**
- * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
- */
-#define ALLOW_DEPRECATED_FUNCTIONS 1
-
 /**
  * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
  * FAT12 has not been well tested.

Marlin/SdFatUtil.cpp

@@ -63,7 +63,7 @@ int SdFatUtil::FreeRam() {
  * \param[in] str Pointer to string stored in flash memory.
  */
 void SdFatUtil::print_P(PGM_P str) {
-  for (uint8_t c; (c = pgm_read_byte(str)); str++) MYSERIAL.write(c);
+  for (uint8_t c; (c = pgm_read_byte(str)); str++) SERIAL_CHAR(c);
 }
 
 /**
@@ -72,7 +72,7 @@ void SdFatUtil::print_P(PGM_P str) {
  * \param[in] pr Print object for output.
  * \param[in] str Pointer to string stored in flash memory.
  */
-void SdFatUtil::println_P(PGM_P str) { print_P(str); MYSERIAL.println(); }
+void SdFatUtil::println_P(PGM_P str) { print_P(str); SERIAL_EOL(); }
 
 /**
  * %Print a string in flash memory to Serial.

Marlin/SdVolume.cpp

@@ -204,7 +204,7 @@ bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
     index &= 0x1FF;
     uint8_t tmp = value;
     if (cluster & 1) {
-      tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
+      tmp = (cacheBuffer_.data[index] & 0xF) | tmp << 4;
     }
     cacheBuffer_.data[index] = tmp;
     index++;

Marlin/Version.h

@@ -35,7 +35,7 @@
   /**
    * Marlin release version identifier
    */
-  #define SHORT_BUILD_VERSION "1.1.7"
+  #define SHORT_BUILD_VERSION "TM3D 1.1.9_R2"
 
   /**
    * Verbose version identifier which should contain a reference to the location
@@ -48,7 +48,7 @@
    * here we define this default string as the date where the latest release
    * version was tagged.
    */
-  #define STRING_DISTRIBUTION_DATE "2017-12-15 12:00"
+  #define STRING_DISTRIBUTION_DATE "2018-09-30"
 
   /**
    * Required minimum Configuration.h and Configuration_adv.h file versions.
@@ -57,8 +57,8 @@
    * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on
    * the configuration files.
    */
-  #define REQUIRED_CONFIGURATION_H_VERSION 010107
-  #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010107
+  #define REQUIRED_CONFIGURATION_H_VERSION 010109
+  #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010109
 
   /**
    * The protocol for communication to the host. Protocol indicates communication
@@ -89,6 +89,6 @@
    * The WEBSITE_URL is the location where users can get more information such as
    * documentation about a specific Marlin release.
    */
-  #define WEBSITE_URL "http://marlinfw.org"
+  #define WEBSITE_URL "tinymachines3d.com"
 
 #endif // USE_AUTOMATIC_VERSIONING

Marlin/_Bootscreen.h

@@ -0,0 +1,106 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+#include <avr/pgmspace.h>
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF,
+0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF,
+0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F,
+0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F,
+0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F,
+0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F,
+0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F,
+0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F,
+0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F,
+0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F,
+0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7,
+0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7,
+0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3,
+0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7,
+0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+
+

Marlin/_Statusscreen.h

@@ -0,0 +1,472 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+#include "MarlinConfig.h"
+
+//============================================
+
+#define STATUS_SCREENWIDTH 128
+
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) (41 + (E) * 20)
+
+#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
+
+#define FAN_ANIM_FRAMES 3
+#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
+#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
+
+//============================================
+
+#if HOTENDS < 2
+
+  #if FAN_ANIM_FRAMES <= 2
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+  #elif FAN_ANIM_FRAMES == 3
+
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+    const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+  #elif FAN_ANIM_FRAMES == 4
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen3_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 
+};
+
+
+  #endif
+
+#else // HOTENDS >= 2
+
+  #if FAN_ANIM_FRAMES <= 2
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+   
+  #elif FAN_ANIM_FRAMES == 3
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+  #elif FAN_ANIM_FRAMES == 4
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen2_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+const unsigned char status_screen3_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+  B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
+  B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
+  B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
+  B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
+  B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
+  B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
+  B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
+  B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
+  B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
+  B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
+  B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
+  B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
+  B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+  B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 
+};
+
+
+  #endif
+
+#endif // HOTENDS >= 2

Marlin/boards.h

@@ -58,8 +58,10 @@
 #define BOARD_K8400             79    // Velleman K8400 Controller (derived from 3Drag Controller)
 #define BOARD_BAM_DICE          401   // 2PrintBeta BAM&DICE with STK drivers
 #define BOARD_BAM_DICE_DUE      402   // 2PrintBeta BAM&DICE Due with STK drivers
-#define BOARD_MKS_BASE          40    // MKS BASE 1.0
-#define BOARD_MKS_13            47    // MKS v1.3 or 1.4 (maybe higher)
+#define BOARD_MKS_BASE          40    // MKS BASE v1.0
+#define BOARD_MKS_BASE_15       405   // MKS v1.5 with Allegro A4982 stepper drivers
+#define BOARD_MKS_BASE_HEROIC   41    // MKS BASE 1.0 with Heroic HR4982 stepper drivers
+#define BOARD_MKS_GEN_13        47    // MKS GEN v1.3 or 1.4
 #define BOARD_MKS_GEN_L         53    // MKS GEN L
 #define BOARD_ZRIB_V20          504   // zrib V2.0 control board (Chinese knock off RAMPS replica)
 #define BOARD_FELIX2            37    // Felix 2.0+ Electronics Board (RAMPS like)
@@ -74,6 +76,9 @@
 #define BOARD_RUMBA             80    // Rumba
 #define BOARD_BQ_ZUM_MEGA_3D    503   // bq ZUM Mega 3D
 #define BOARD_MAKEBOARD_MINI    431   // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+#define BOARD_TRIGORILLA_13     343   // TriGorilla Anycubic version 1.3 based on RAMPS EFB
+#define BOARD_TRIGORILLA_14     443   // TriGorilla Anycubic version 1.4 based on RAMPS EFB
+#define BOARD_RAMPS_ENDER_4     243   // Creality: Ender-4, CR-8
 
 //
 // Other ATmega1280, ATmega2560
@@ -91,6 +96,8 @@
 #define BOARD_RAMBO             301   // Rambo
 #define BOARD_MINIRAMBO         302   // Mini-Rambo
 #define BOARD_MINIRAMBO_10A     303   // Mini-Rambo 1.0a
+#define BOARD_EINSY_RAMBO       304   // Einsy Rambo
+#define BOARD_EINSY_RETRO       305   // Einsy Retro
 #define BOARD_ELEFU_3           21    // Elefu Ra Board (v3)
 #define BOARD_LEAPFROG          999   // Leapfrog
 #define BOARD_MEGACONTROLLER    310   // Mega controller
@@ -114,8 +121,11 @@
 #define BOARD_MELZI             63    // Melzi
 #define BOARD_MELZI_MAKR3D      66    // Melzi with ATmega1284 (MaKr3d version)
 #define BOARD_MELZI_CREALITY    89    // Melzi Creality3D board (for CR-10 etc)
+#define BOARD_MELZI_MALYAN      92    // Melzi Malyan M150 board
+#define BOARD_MELZI_TRONXY      505   // Tronxy X5S
 #define BOARD_STB_11            64    // STB V1.1
 #define BOARD_AZTEEG_X1         65    // Azteeg X1
+#define BOARD_ANET_10           69    // Anet 1.0 (Melzi clone)
 
 //
 // Other ATmega644P, ATmega644, ATmega1284P
@@ -132,7 +142,6 @@
 #define BOARD_OMCA_A            90    // Alpha OMCA board
 #define BOARD_OMCA              91    // Final OMCA board
 #define BOARD_SETHI             20    // Sethi 3D_1
-#define BOARD_ANET_10           69    // Anet 1.0 (Melzi clone)
 
 //
 // Teensyduino - AT90USB1286, AT90USB1286P
@@ -147,6 +156,6 @@
 #define BOARD_TEENSY2           84    // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84  make
 #define BOARD_5DPRINT           88    // 5DPrint D8 Driver Board
 
-#define MB(board) (MOTHERBOARD==BOARD_##board)
+#define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)
 
 #endif // __BOARDS_H

Marlin/buzzer.h

@@ -104,7 +104,7 @@ class Buzzer {
      * @param duration Duration of the tone in milliseconds
      * @param frequency Frequency of the tone in hertz
      */
-    void tone(const uint16_t &duration, const uint16_t &frequency = 0) {
+    void tone(const uint16_t &duration, const uint16_t &frequency=0) {
       while (buffer.isFull()) {
         this->tick();
         thermalManager.manage_heater();

Marlin/cardreader.cpp

@@ -29,8 +29,11 @@
 #include "ultralcd.h"
 #include "stepper.h"
 #include "language.h"
+#include "printcounter.h"
 
-#define LONGEST_FILENAME (longFilename[0] ? longFilename : filename)
+#if ENABLED(POWER_LOSS_RECOVERY)
+  #include "power_loss_recovery.h"
+#endif
 
 CardReader::CardReader() {
   #if ENABLED(SDCARD_SORT_ALPHA)
@@ -49,15 +52,13 @@ CardReader::CardReader() {
   workDirDepth = 0;
   ZERO(workDirParents);
 
-  autostart_stilltocheck = true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
-  autostart_index = 0;
+  // Disable autostart until card is initialized
+  autostart_index = -1;
 
   //power to SD reader
   #if SDPOWER > -1
     OUT_WRITE(SDPOWER, HIGH);
-  #endif // SDPOWER
-
-  next_autostart_ms = millis() + 5000;
+  #endif
 }
 
 char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
@@ -85,25 +86,25 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
   uint8_t cnt = 0;
 
   // Read the next entry from a directory
-  while (parent.readDir(p, longFilename) > 0) {
+  while (parent.readDir(&p, longFilename) > 0) {
 
     // If the entry is a directory and the action is LS_SerialPrint
     if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) {
 
       // Get the short name for the item, which we know is a folder
-      char lfilename[FILENAME_LENGTH];
-      createFilename(lfilename, p);
+      char dosFilename[FILENAME_LENGTH];
+      createFilename(dosFilename, p);
 
       // Allocate enough stack space for the full path to a folder, trailing slash, and nul
-      bool prepend_is_empty = (prepend[0] == '\0');
-      int len = (prepend_is_empty ? 1 : strlen(prepend)) + strlen(lfilename) + 1 + 1;
+      const bool prepend_is_empty = (!prepend || prepend[0] == '\0');
+      const int len = (prepend_is_empty ? 1 : strlen(prepend)) + strlen(dosFilename) + 1 + 1;
       char path[len];
 
       // Append the FOLDERNAME12/ to the passed string.
       // It contains the full path to the "parent" argument.
       // We now have the full path to the item in this folder.
       strcpy(path, prepend_is_empty ? "/" : prepend); // root slash if prepend is empty
-      strcat(path, lfilename); // FILENAME_LENGTH-1 characters maximum
+      strcat(path, dosFilename); // FILENAME_LENGTH-1 characters maximum
       strcat(path, "/");       // 1 character
 
       // Serial.print(path);
@@ -111,11 +112,11 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
       // Get a new directory object using the full path
       // and dive recursively into it.
       SdFile dir;
-      if (!dir.open(parent, lfilename, O_READ)) {
+      if (!dir.open(&parent, dosFilename, O_READ)) {
         if (lsAction == LS_SerialPrint) {
           SERIAL_ECHO_START();
           SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
-          SERIAL_ECHOLN(lfilename);
+          SERIAL_ECHOLN(dosFilename);
         }
       }
       lsDive(path, dir);
@@ -140,7 +141,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
 
         case LS_SerialPrint:
           createFilename(filename, p);
-          SERIAL_PROTOCOL(prepend);
+          if (prepend) SERIAL_PROTOCOL(prepend);
           SERIAL_PROTOCOL(filename);
           SERIAL_PROTOCOLCHAR(' ');
           SERIAL_PROTOCOLLN(p.fileSize);
@@ -163,7 +164,7 @@ void CardReader::lsDive(const char *prepend, SdFile parent, const char * const m
 void CardReader::ls() {
   lsAction = LS_SerialPrint;
   root.rewind();
-  lsDive("", root);
+  lsDive(NULL, root);
 }
 
 #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
@@ -198,7 +199,7 @@ void CardReader::ls() {
 
       // Find the item, setting the long filename
       diveDir.rewind();
-      lsDive("", diveDir, segment);
+      lsDive(NULL, diveDir, segment);
 
       // Print /LongNamePart to serial output
       SERIAL_PROTOCOLCHAR('/');
@@ -211,7 +212,7 @@ void CardReader::ls() {
 
       // Open the sub-item as the new dive parent
       SdFile dir;
-      if (!dir.open(diveDir, segment, O_READ)) {
+      if (!dir.open(&diveDir, segment, O_READ)) {
         SERIAL_EOL();
         SERIAL_ECHO_START();
         SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
@@ -229,6 +230,28 @@ void CardReader::ls() {
 
 #endif // LONG_FILENAME_HOST_SUPPORT
 
+/**
+ * Echo the DOS 8.3 filename (and long filename, if any)
+ */
+void CardReader::printFilename() {
+  if (file.isOpen()) {
+    char dosFilename[FILENAME_LENGTH];
+    file.getFilename(dosFilename);
+    SERIAL_ECHO(dosFilename);
+    #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
+      getfilename(0, dosFilename);
+      if (longFilename[0]) {
+        SERIAL_ECHO(' ');
+        SERIAL_ECHO(longFilename);
+      }
+    #endif
+  }
+  else
+    SERIAL_ECHOPGM("(no file)");
+
+  SERIAL_EOL();
+}
+
 void CardReader::initsd() {
   cardOK = false;
   if (root.isOpen()) root.close();
@@ -237,16 +260,16 @@ void CardReader::initsd() {
     #define SPI_SPEED SPI_FULL_SPEED
   #endif
 
-  if (!card.init(SPI_SPEED, SDSS)
+  if (!sd2card.init(SPI_SPEED, SDSS)
     #if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
-      && !card.init(SPI_SPEED, LCD_SDSS)
+      && !sd2card.init(SPI_SPEED, LCD_SDSS)
     #endif
   ) {
-    //if (!card.init(SPI_HALF_SPEED,SDSS))
+    //if (!sd2card.init(SPI_HALF_SPEED,SDSS))
     SERIAL_ECHO_START();
     SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
   }
-  else if (!volume.init(&card)) {
+  else if (!volume.init(&sd2card)) {
     SERIAL_ERROR_START();
     SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
   }
@@ -262,17 +285,6 @@ void CardReader::initsd() {
   setroot();
 }
 
-void CardReader::setroot() {
-  /*if (!workDir.openRoot(&volume)) {
-    SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
-  }*/
-  workDir = root;
-  curDir = &workDir;
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    presort();
-  #endif
-}
-
 void CardReader::release() {
   sdprinting = false;
   cardOK = false;
@@ -282,27 +294,37 @@ void CardReader::openAndPrintFile(const char *name) {
   char cmd[4 + strlen(name) + 1]; // Room for "M23 ", filename, and null
   sprintf_P(cmd, PSTR("M23 %s"), name);
   for (char *c = &cmd[4]; *c; c++) *c = tolower(*c);
-  enqueue_and_echo_command(cmd);
+  enqueue_and_echo_command_now(cmd);
   enqueue_and_echo_commands_P(PSTR("M24"));
 }
 
 void CardReader::startFileprint() {
   if (cardOK) {
     sdprinting = true;
-    #if ENABLED(SDCARD_SORT_ALPHA)
+    #if SD_RESORT
       flush_presort();
     #endif
   }
 }
 
-void CardReader::stopSDPrint() {
+void CardReader::stopSDPrint(
+  #if SD_RESORT
+    const bool re_sort/*=false*/
+  #endif
+) {
+  #if ENABLED(ADVANCED_PAUSE_FEATURE)
+    did_pause_print = 0;
+  #endif
   sdprinting = false;
   if (isFileOpen()) file.close();
+  #if SD_RESORT
+    if (re_sort) presort();
+  #endif
 }
 
-void CardReader::openLogFile(char* name) {
+void CardReader::openLogFile(char * const path) {
   logging = true;
-  openFile(name, false);
+  openFile(path, false);
 }
 
 void appendAtom(SdFile &file, char *& dst, uint8_t &cnt) {
@@ -325,7 +347,7 @@ void CardReader::getAbsFilename(char *t) {
   *t = '\0';
 }
 
-void CardReader::openFile(char* name, const bool read, const bool subcall/*=false*/) {
+void CardReader::openFile(char * const path, const bool read, const bool subcall/*=false*/) {
 
   if (!cardOK) return;
 
@@ -335,7 +357,7 @@ void CardReader::openFile(char* name, const bool read, const bool subcall/*=fals
       if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
         SERIAL_ERROR_START();
         SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
-        SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
+        SERIAL_ERRORLN((int)SD_PROCEDURE_DEPTH);
         kill(PSTR(MSG_KILLED));
         return;
       }
@@ -345,7 +367,7 @@ void CardReader::openFile(char* name, const bool read, const bool subcall/*=fals
       filespos[file_subcall_ctr] = sdpos;
 
       SERIAL_ECHO_START();
-      SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", name);
+      SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", path);
       SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
       SERIAL_ECHOLNPAIR("\" pos", sdpos);
       file_subcall_ctr++;
@@ -366,49 +388,14 @@ void CardReader::openFile(char* name, const bool read, const bool subcall/*=fals
     SERIAL_ECHO_START();
     SERIAL_ECHOPGM("Now ");
     serialprintPGM(doing == 1 ? PSTR("doing") : PSTR("fresh"));
-    SERIAL_ECHOLNPAIR(" file: ", name);
+    SERIAL_ECHOLNPAIR(" file: ", path);
   }
 
   stopSDPrint();
 
-  SdFile myDir;
-  curDir = &root;
-  char *fname = name;
-  char *dirname_start, *dirname_end;
-
-  if (name[0] == '/') {
-    dirname_start = &name[1];
-    while (dirname_start != NULL) {
-      dirname_end = strchr(dirname_start, '/');
-      //SERIAL_ECHOPGM("start:");SERIAL_ECHOLN((int)(dirname_start - name));
-      //SERIAL_ECHOPGM("end  :");SERIAL_ECHOLN((int)(dirname_end - name));
-      if (dirname_end != NULL && dirname_end > dirname_start) {
-        char subdirname[FILENAME_LENGTH];
-        strncpy(subdirname, dirname_start, dirname_end - dirname_start);
-        subdirname[dirname_end - dirname_start] = '\0';
-        if (!myDir.open(curDir, subdirname, O_READ)) {
-          SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
-          SERIAL_PROTOCOL(subdirname);
-          SERIAL_PROTOCOLCHAR('.');
-          return;
-        }
-        else {
-          //SERIAL_ECHOLNPGM("dive ok");
-        }
-
-        curDir = &myDir;
-        dirname_start = dirname_end + 1;
-      }
-      else { // the remainder after all /fsa/fdsa/ is the filename
-        fname = dirname_start;
-        //SERIAL_ECHOLNPGM("remainder");
-        //SERIAL_ECHOLN(fname);
-        break;
-      }
-    }
-  }
-  else
-    curDir = &workDir; // Relative paths start in current directory
+  SdFile *curDir;
+  const char * const fname = diveToFile(curDir, path, false);
+  if (!fname) return;
 
   if (read) {
     if (file.open(curDir, fname, O_READ)) {
@@ -417,8 +404,12 @@ void CardReader::openFile(char* name, const bool read, const bool subcall/*=fals
       SERIAL_PROTOCOLPAIR(MSG_SD_FILE_OPENED, fname);
       SERIAL_PROTOCOLLNPAIR(MSG_SD_SIZE, filesize);
       SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
+
       getfilename(0, fname);
       lcd_setstatus(longFilename[0] ? longFilename : fname);
+      //if (longFilename[0]) {
+      //  SERIAL_PROTOCOLPAIR(MSG_SD_FILE_LONG_NAME, longFilename);
+      //}
     }
     else {
       SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
@@ -434,7 +425,7 @@ void CardReader::openFile(char* name, const bool read, const bool subcall/*=fals
     }
     else {
       saving = true;
-      SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, name);
+      SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, path);
       lcd_setstatus(fname);
     }
   }
@@ -445,40 +436,9 @@ void CardReader::removeFile(const char * const name) {
 
   stopSDPrint();
 
-  SdFile myDir;
-  curDir = &root;
-  const char *fname = name;
-
-  char *dirname_start, *dirname_end;
-  if (name[0] == '/') {
-    dirname_start = strchr(name, '/') + 1;
-    while (dirname_start != NULL) {
-      dirname_end = strchr(dirname_start, '/');
-      //SERIAL_ECHOPGM("start:");SERIAL_ECHOLN((int)(dirname_start - name));
-      //SERIAL_ECHOPGM("end  :");SERIAL_ECHOLN((int)(dirname_end - name));
-      if (dirname_end != NULL && dirname_end > dirname_start) {
-        char subdirname[FILENAME_LENGTH];
-        strncpy(subdirname, dirname_start, dirname_end - dirname_start);
-        subdirname[dirname_end - dirname_start] = 0;
-        SERIAL_ECHOLN(subdirname);
-        if (!myDir.open(curDir, subdirname, O_READ)) {
-          SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, subdirname);
-          SERIAL_PROTOCOLCHAR('.');
-          SERIAL_EOL();
-          return;
-        }
-
-        curDir = &myDir;
-        dirname_start = dirname_end + 1;
-      }
-      else {
-        fname = dirname_start;
-        break;
-      }
-    }
-  }
-  else // Relative paths are rooted in the current directory
-    curDir = &workDir;
+  SdFile *curDir;
+  const char * const fname = diveToFile(curDir, name, false);
+  if (!fname) return;
 
   if (file.remove(curDir, fname)) {
     SERIAL_PROTOCOLPGM("File deleted:");
@@ -496,7 +456,7 @@ void CardReader::removeFile(const char * const name) {
 }
 
 void CardReader::getStatus() {
-  if (cardOK) {
+  if (cardOK && sdprinting) {
     SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
     SERIAL_PROTOCOL(sdpos);
     SERIAL_PROTOCOLCHAR('/');
@@ -526,40 +486,46 @@ void CardReader::write_command(char *buf) {
   }
 }
 
-void CardReader::checkautostart(bool force) {
-  if (!force && (!autostart_stilltocheck || PENDING(millis(), next_autostart_ms)))
-    return;
+//
+// Run the next autostart file. Called:
+// - On boot after successful card init
+// - After finishing the previous autostart file
+// - From the LCD command to run the autostart file
+//
 
-  autostart_stilltocheck = false;
+void CardReader::checkautostart() {
 
-  if (!cardOK) {
-    initsd();
-    if (!cardOK) return; // fail
-  }
+  if (autostart_index < 0 || sdprinting) return;
 
-  char autoname[10];
-  sprintf_P(autoname, PSTR("auto%i.g"), autostart_index);
-  for (int8_t i = 0; i < (int8_t)strlen(autoname); i++) autoname[i] = tolower(autoname[i]);
+  if (!cardOK) initsd();
 
-  dir_t p;
-
-  root.rewind();
-
-  bool found = false;
-  while (root.readDir(p, NULL) > 0) {
-    for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]);
-    if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
-      openAndPrintFile(autoname);
-      found = true;
+  if (cardOK
+    #if ENABLED(POWER_LOSS_RECOVERY)
+      && !jobRecoverFileExists() // Don't run auto#.g when a resume file exists
+    #endif
+  ) {
+    char autoname[10];
+    sprintf_P(autoname, PSTR("auto%i.g"), int(autostart_index));
+    dir_t p;
+    root.rewind();
+    while (root.readDir(&p, NULL) > 0) {
+      for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]);
+      if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
+        openAndPrintFile(autoname);
+        autostart_index++;
+        return;
+      }
     }
   }
-  if (!found)
-    autostart_index = -1;
-  else
-    autostart_index++;
+  autostart_index = -1;
 }
 
-void CardReader::closefile(bool store_location) {
+void CardReader::beginautostart() {
+  autostart_index = 0;
+  setroot();
+}
+
+void CardReader::closefile(const bool store_location) {
   file.sync();
   file.close();
   saving = logging = false;
@@ -572,6 +538,7 @@ void CardReader::closefile(bool store_location) {
 
 /**
  * Get the name of a file in the current directory by index
+ * with optional name to match.
  */
 void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) {
   #if ENABLED(SDSORT_CACHE_NAMES)
@@ -588,35 +555,59 @@ void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) {
       return;
     }
   #endif // SDSORT_CACHE_NAMES
-  curDir = &workDir;
   lsAction = LS_GetFilename;
   nrFile_index = nr;
-  curDir->rewind();
-  lsDive("", *curDir, match);
+  workDir.rewind();
+  lsDive(NULL, workDir, match);
 }
 
 uint16_t CardReader::getnrfilenames() {
-  curDir = &workDir;
   lsAction = LS_Count;
   nrFiles = 0;
-  curDir->rewind();
-  lsDive("", *curDir);
+  workDir.rewind();
+  lsDive(NULL, workDir);
   //SERIAL_ECHOLN(nrFiles);
   return nrFiles;
 }
 
+/**
+ * Dive to the given file path, with optional echo.
+ * On exit set curDir and return the name part of the path.
+ * A NULL result indicates an unrecoverable error.
+ */
+const char* CardReader::diveToFile(SdFile*& curDir, const char * const path, const bool echo) {
+  SdFile myDir;
+  if (path[0] != '/') { curDir = &workDir; return path; }
+
+  curDir = &root;
+  const char *dirname_start = &path[1];
+  while (dirname_start) {
+    char * const dirname_end = strchr(dirname_start, '/');
+    if (dirname_end <= dirname_start) break;
+    const uint8_t len = dirname_end - dirname_start;
+    char dosSubdirname[len + 1];
+    strncpy(dosSubdirname, dirname_start, len);
+    dosSubdirname[len] = 0;
+
+    if (echo) SERIAL_ECHOLN(dosSubdirname);
+
+    if (!myDir.open(curDir, dosSubdirname, O_READ)) {
+      SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, dosSubdirname);
+      SERIAL_PROTOCOLCHAR('.');
+      SERIAL_EOL();
+      return NULL;
+    }
+    curDir = &myDir;
+    dirname_start = dirname_end + 1;
+  }
+  return dirname_start;
+}
+
 void CardReader::chdir(const char * relpath) {
   SdFile newDir;
-  SdFile *parent = &root;
+  SdFile *parent = workDir.isOpen() ? &workDir : &root;
 
-  if (workDir.isOpen()) parent = &workDir;
-
-  if (!newDir.open(*parent, relpath, O_READ)) {
-    SERIAL_ECHO_START();
-    SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
-    SERIAL_ECHOLN(relpath);
-  }
-  else {
+  if (newDir.open(parent, relpath, O_READ)) {
     workDir = newDir;
     if (workDirDepth < MAX_DIR_DEPTH)
       workDirParents[workDirDepth++] = workDir;
@@ -624,6 +615,11 @@ void CardReader::chdir(const char * relpath) {
       presort();
     #endif
   }
+  else {
+    SERIAL_ECHO_START();
+    SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
+    SERIAL_ECHOLN(relpath);
+  }
 }
 
 int8_t CardReader::updir() {
@@ -636,6 +632,16 @@ int8_t CardReader::updir() {
   return workDirDepth;
 }
 
+void CardReader::setroot() {
+  /*if (!workDir.openRoot(&volume)) {
+    SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
+  }*/
+  workDir = root;
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    presort();
+  #endif
+}
+
 #if ENABLED(SDCARD_SORT_ALPHA)
 
   /**
@@ -660,14 +666,14 @@ int8_t CardReader::updir() {
    */
   void CardReader::presort() {
 
+    // Throw away old sort index
+    flush_presort();
+
     // Sorting may be turned off
     #if ENABLED(SDSORT_GCODE)
       if (!sort_alpha) return;
     #endif
 
-    // Throw away old sort index
-    flush_presort();
-
     // If there are files, sort up to the limit
     uint16_t fileCnt = getnrfilenames();
     if (fileCnt > 0) {
@@ -723,7 +729,7 @@ int8_t CardReader::updir() {
             getfilename(i);
             #if ENABLED(SDSORT_DYNAMIC_RAM)
               // Use dynamic method to copy long filename
-              sortnames[i] = strdup(LONGEST_FILENAME);
+              sortnames[i] = strdup(longest_filename());
               #if ENABLED(SDSORT_CACHE_NAMES)
                 // When caching also store the short name, since
                 // we're replacing the getfilename() behavior.
@@ -732,10 +738,10 @@ int8_t CardReader::updir() {
             #else
               // Copy filenames into the static array
               #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
-                strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+                strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN);
                 sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0';
               #else
-                strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+                strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN);
               #endif
               #if ENABLED(SDSORT_CACHE_NAMES)
                 strcpy(sortshort[i], filename);
@@ -783,12 +789,12 @@ int8_t CardReader::updir() {
             // throughout the loop. Slow if there are many.
             #if DISABLED(SDSORT_USES_RAM)
               getfilename(o1);
-              strcpy(name1, LONGEST_FILENAME); // save (or getfilename below will trounce it)
+              strcpy(name1, longest_filename()); // save (or getfilename below will trounce it)
               #if HAS_FOLDER_SORTING
                 bool dir1 = filenameIsDir;
               #endif
               getfilename(o2);
-              char *name2 = LONGEST_FILENAME; // use the string in-place
+              char *name2 = longest_filename(); // use the string in-place
             #endif // !SDSORT_USES_RAM
 
             // Sort the current pair according to settings.
@@ -826,7 +832,7 @@ int8_t CardReader::updir() {
           getfilename(0);
           #if ENABLED(SDSORT_DYNAMIC_RAM)
             sortnames = new char*[1];
-            sortnames[0] = strdup(LONGEST_FILENAME); // malloc
+            sortnames[0] = strdup(longest_filename()); // malloc
             #if ENABLED(SDSORT_CACHE_NAMES)
               sortshort = new char*[1];
               sortshort[0] = strdup(filename);       // malloc
@@ -834,10 +840,10 @@ int8_t CardReader::updir() {
             isDir = new uint8_t[1];
           #else
             #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH
-              strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+              strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN);
               sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0';
             #else
-              strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN);
+              strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN);
             #endif
             #if ENABLED(SDSORT_CACHE_NAMES)
               strcpy(sortshort[0], filename);
@@ -881,7 +887,7 @@ uint16_t CardReader::get_num_Files() {
 }
 
 void CardReader::printingHasFinished() {
-  stepper.synchronize();
+  planner.synchronize();
   file.close();
   if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
     file_subcall_ctr--;
@@ -891,19 +897,91 @@ void CardReader::printingHasFinished() {
   }
   else {
     sdprinting = false;
-    if (SD_FINISHED_STEPPERRELEASE)
-      enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
+
+    #if ENABLED(POWER_LOSS_RECOVERY)
+      removeJobRecoveryFile();
+    #endif
+
+    #if ENABLED(SD_FINISHED_STEPPERRELEASE) && defined(SD_FINISHED_RELEASECOMMAND)
+      planner.finish_and_disable();
+    #endif
     print_job_timer.stop();
     if (print_job_timer.duration() > 60)
       enqueue_and_echo_commands_P(PSTR("M31"));
     #if ENABLED(SDCARD_SORT_ALPHA)
       presort();
     #endif
-
+    #if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
+      progress_bar_percent = 0;
+    #endif
     #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE)
       lcd_reselect_last_file();
     #endif
   }
 }
 
+#if ENABLED(AUTO_REPORT_SD_STATUS)
+  uint8_t CardReader::auto_report_sd_interval = 0;
+  millis_t CardReader::next_sd_report_ms;
+
+  void CardReader::auto_report_sd_status() {
+    millis_t current_ms = millis();
+    if (auto_report_sd_interval && ELAPSED(current_ms, next_sd_report_ms)) {
+      next_sd_report_ms = current_ms + 1000UL * auto_report_sd_interval;
+      getStatus();
+    }
+  }
+#endif // AUTO_REPORT_SD_STATUS
+
+#if ENABLED(POWER_LOSS_RECOVERY)
+
+  char job_recovery_file_name[4] = "bin";
+
+  void CardReader::openJobRecoveryFile(const bool read) {
+    if (!cardOK) return;
+    if (jobRecoveryFile.isOpen()) return;
+    if (!jobRecoveryFile.open(&root, job_recovery_file_name, read ? O_READ : O_CREAT | O_WRITE | O_TRUNC | O_SYNC)) {
+      SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, job_recovery_file_name);
+      SERIAL_PROTOCOLCHAR('.');
+      SERIAL_EOL();
+    }
+    else if (!read)
+      SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, job_recovery_file_name);
+  }
+
+  void CardReader::closeJobRecoveryFile() { jobRecoveryFile.close(); }
+
+  bool CardReader::jobRecoverFileExists() {
+    const bool exists = jobRecoveryFile.open(&root, job_recovery_file_name, O_READ);
+    if (exists) jobRecoveryFile.close();
+    return exists;
+  }
+
+  int16_t CardReader::saveJobRecoveryInfo() {
+    jobRecoveryFile.seekSet(0);
+    const int16_t ret = jobRecoveryFile.write(&job_recovery_info, sizeof(job_recovery_info));
+    #if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
+      if (ret == -1) SERIAL_PROTOCOLLNPGM("Power-loss file write failed.");
+    #endif
+    return ret;
+  }
+
+  int16_t CardReader::loadJobRecoveryInfo() {
+    return jobRecoveryFile.read(&job_recovery_info, sizeof(job_recovery_info));
+  }
+
+  void CardReader::removeJobRecoveryFile() {
+    job_recovery_info.valid_head = job_recovery_info.valid_foot = job_recovery_commands_count = 0;
+    if (jobRecoverFileExists()) {
+      closefile();
+      removeFile(job_recovery_file_name);
+      #if ENABLED(DEBUG_POWER_LOSS_RECOVERY)
+        SERIAL_PROTOCOLPGM("Power-loss file delete");
+        serialprintPGM(jobRecoverFileExists() ? PSTR(" failed.\n") : PSTR("d.\n"));
+      #endif
+    }
+  }
+
+#endif // POWER_LOSS_RECOVERY
+
 #endif // SDSUPPORT

Marlin/cardreader.h

@@ -27,11 +27,11 @@
 
 #if ENABLED(SDSUPPORT)
 
+#define SD_RESORT ENABLED(SDCARD_SORT_ALPHA) && ENABLED(SDSORT_DYNAMIC_RAM)
+
 #define MAX_DIR_DEPTH 10          // Maximum folder depth
 
 #include "SdFile.h"
-#include "types.h"
-#include "enum.h"
 
 class CardReader {
 public:
@@ -39,22 +39,25 @@ public:
 
   void initsd();
   void write_command(char *buf);
-  // Files auto[0-9].g on the sd card are performed in sequence.
-  // This is to delay autostart and hence the initialisation of
-  // the sd card to some seconds after the normal init, so the
-  // device is available soon after a reset.
 
-  void checkautostart(bool x);
-  void openFile(char* name, const bool read, const bool subcall=false);
-  void openLogFile(char* name);
+  void beginautostart();
+  void checkautostart();
+
+  void openFile(char * const path, const bool read, const bool subcall=false);
+  void openLogFile(char * const path);
   void removeFile(const char * const name);
-  void closefile(bool store_location=false);
+  void closefile(const bool store_location=false);
   void release();
   void openAndPrintFile(const char *name);
   void startFileprint();
-  void stopSDPrint();
+  void stopSDPrint(
+    #if SD_RESORT
+      const bool re_sort=false
+    #endif
+  );
   void getStatus();
   void printingHasFinished();
+  void printFilename();
 
   #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
     void printLongPath(char *path);
@@ -70,6 +73,8 @@ public:
   int8_t updir();
   void setroot();
 
+  const char* diveToFile(SdFile*& curDir, const char * const path, const bool echo);
+
   uint16_t get_num_Files();
 
   #if ENABLED(SDCARD_SORT_ALPHA)
@@ -82,20 +87,41 @@ public:
     #endif
   #endif
 
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    void openJobRecoveryFile(const bool read);
+    void closeJobRecoveryFile();
+    bool jobRecoverFileExists();
+    int16_t saveJobRecoveryInfo();
+    int16_t loadJobRecoveryInfo();
+    void removeJobRecoveryFile();
+  #endif
+
   FORCE_INLINE void pauseSDPrint() { sdprinting = false; }
   FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
   FORCE_INLINE bool eof() { return sdpos >= filesize; }
   FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
-  FORCE_INLINE void setIndex(long index) { sdpos = index; file.seekSet(index); }
+  FORCE_INLINE void setIndex(const uint32_t index) { sdpos = index; file.seekSet(index); }
+  FORCE_INLINE uint32_t getIndex() { return sdpos; }
   FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; }
   FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; }
 
+  #if ENABLED(AUTO_REPORT_SD_STATUS)
+    void auto_report_sd_status(void);
+    FORCE_INLINE void set_auto_report_interval(uint8_t v) {
+      NOMORE(v, 60);
+      auto_report_sd_interval = v;
+      next_sd_report_ms = millis() + 1000UL * v;
+    }
+  #endif
+
+  FORCE_INLINE char* longest_filename() { return longFilename[0] ? longFilename : filename; }
+
 public:
   bool saving, logging, sdprinting, cardOK, filenameIsDir;
   char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH];
-  int autostart_index;
+  int8_t autostart_index;
 private:
-  SdFile root, *curDir, workDir, workDirParents[MAX_DIR_DEPTH];
+  SdFile root, workDir, workDirParents[MAX_DIR_DEPTH];
   uint8_t workDirDepth;
 
   // Sort files and folders alphabetically.
@@ -148,10 +174,14 @@ private:
 
   #endif // SDCARD_SORT_ALPHA
 
-  Sd2Card card;
+  Sd2Card sd2card;
   SdVolume volume;
   SdFile file;
 
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    SdFile jobRecoveryFile;
+  #endif
+
   #define SD_PROCEDURE_DEPTH 1
   #define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
   uint8_t file_subcall_ctr;
@@ -159,9 +189,6 @@ private:
   char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
   uint32_t filesize, sdpos;
 
-  millis_t next_autostart_ms;
-  bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
-
   LsAction lsAction; //stored for recursion.
   uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
   char* diveDirName;
@@ -170,6 +197,11 @@ private:
   #if ENABLED(SDCARD_SORT_ALPHA)
     void flush_presort();
   #endif
+
+  #if ENABLED(AUTO_REPORT_SD_STATUS)
+    static uint8_t auto_report_sd_interval;
+    static millis_t next_sd_report_ms;
+  #endif
 };
 
 #if PIN_EXISTS(SD_DETECT)

Marlin/configuration_store.h

@@ -29,19 +29,36 @@ class MarlinSettings {
   public:
     MarlinSettings() { }
 
+    static uint16_t datasize();
+
     static void reset();
-    static bool save();
+    static bool save();   // Return 'true' if data was saved
+
+    FORCE_INLINE static bool init_eeprom() {
+      reset();
+      #if ENABLED(EEPROM_SETTINGS)
+        const bool success = save();
+        #if ENABLED(EEPROM_CHITCHAT)
+          if (success) report();
+        #endif
+        return success;
+      #else
+        return true;
+      #endif
+    }
 
     #if ENABLED(EEPROM_SETTINGS)
-      static bool load();
+      static bool load();     // Return 'true' if data was loaded ok
+      static bool validate(); // Return 'true' if EEPROM data is ok
 
       #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
                                          // That can store is enabled
-        FORCE_INLINE static int get_start_of_meshes() { return meshes_begin; }
-        FORCE_INLINE static int get_end_of_meshes() { return meshes_end; }
-        static int calc_num_meshes();
-        static void store_mesh(int8_t slot);
-        static void load_mesh(int8_t slot, void *into = 0);
+        static uint16_t meshes_start_index();
+        FORCE_INLINE static uint16_t meshes_end_index() { return meshes_end; }
+        static uint16_t calc_num_meshes();
+        static int mesh_slot_offset(const int8_t slot);
+        static void store_mesh(const int8_t slot);
+        static void load_mesh(const int8_t slot, void * const into=NULL);
 
         //static void delete_mesh();    // necessary if we have a MAT
         //static void defrag_meshes();  // "
@@ -62,18 +79,20 @@ class MarlinSettings {
     static void postprocess();
 
     #if ENABLED(EEPROM_SETTINGS)
-      static bool eeprom_error;
+
+      static bool eeprom_error, validating;
 
       #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
                                          // That can store is enabled
-        static int meshes_begin;
-        const static int meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
-                                                   // live at the very end of the eeprom
+        static constexpr uint16_t meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
+                                                            // live at the very end of the eeprom
 
       #endif
 
+      static bool _load();
       static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc);
-      static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc);
+      static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc, const bool force=false);
+      static bool size_error(const uint16_t size);
     #endif
 };
 

Marlin/dac_mcp4728.cpp

@@ -30,11 +30,13 @@
  * http://arduino.cc/forum/index.php/topic,51842.0.html
  */
 
-#include "dac_mcp4728.h"
-#include "enum.h"
+#include "MarlinConfig.h"
 
 #if ENABLED(DAC_STEPPER_CURRENT)
 
+#include "dac_mcp4728.h"
+#include "enum.h"
+
 uint16_t mcp4728_values[XYZE];
 
 /**

Marlin/delay.h

@@ -0,0 +1,77 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * AVR busy wait delay Cycles routines:
+ *
+ *  DELAY_CYCLES(count): Delay execution in cycles
+ *  DELAY_NS(count): Delay execution in nanoseconds
+ *  DELAY_US(count): Delay execution in microseconds
+ */
+
+#ifndef MARLIN_DELAY_H
+#define MARLIN_DELAY_H
+
+#define nop() __asm__ __volatile__("nop;\n\t":::)
+
+FORCE_INLINE static void __delay_4cycles(uint8_t cy) {
+  __asm__ __volatile__(
+    L("1")
+    A("dec %[cnt]")
+    A("nop")
+    A("brne 1b")
+    : [cnt] "+r"(cy)  // output: +r means input+output
+    :                 // input:
+    : "cc"            // clobbers:
+  );
+}
+
+/* ---------------- Delay in cycles */
+FORCE_INLINE static void DELAY_CYCLES(uint16_t x) {
+
+  if (__builtin_constant_p(x)) {
+    #define MAXNOPS 4
+
+    if (x <= (MAXNOPS)) {
+      switch (x) { case 4: nop(); case 3: nop(); case 2: nop(); case 1: nop(); }
+    }
+    else {
+      const uint32_t rem = (x) % (MAXNOPS);
+      switch (rem) { case 3: nop(); case 2: nop(); case 1: nop(); }
+      if ((x = (x) / (MAXNOPS)))
+        __delay_4cycles(x); // if need more then 4 nop loop is more optimal
+    }
+
+    #undef MAXNOPS
+  }
+  else
+    __delay_4cycles(x / 4);
+}
+#undef nop
+
+/* ---------------- Delay in nanoseconds */
+#define DELAY_NS(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) / 1000L )
+
+/* ---------------- Delay in microseconds */
+#define DELAY_US(x) DELAY_CYCLES( (x) * (F_CPU/1000000L) )
+
+#endif // MARLIN_DELAY_H

Marlin/digipot_mcp4018.cpp

@@ -89,7 +89,7 @@ static void i2c_send(const uint8_t channel, const byte v) {
 
 // This is for the MCP4018 I2C based digipot
 void digipot_i2c_set_current(uint8_t channel, float current) {
-  i2c_send(channel, current_to_wiper(min(max(current, 0.0f), float(DIGIPOT_A4988_MAX_CURRENT))));
+  i2c_send(channel, current_to_wiper(MIN(MAX(current, 0), float(DIGIPOT_A4988_MAX_CURRENT))));
 }
 
 void digipot_i2c_init() {

Marlin/digipot_mcp4451.cpp

@@ -50,7 +50,7 @@ static void i2c_send(const byte addr, const byte a, const byte b) {
 
 // This is for the MCP4451 I2C based digipot
 void digipot_i2c_set_current(uint8_t channel, float current) {
-  current = min((float) max(current, 0.0f), DIGIPOT_I2C_MAX_CURRENT);
+  current = MIN((float) MAX(current, 0), DIGIPOT_I2C_MAX_CURRENT);
   // these addresses are specific to Azteeg X3 Pro, can be set to others,
   // In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
   byte addr = 0x2C; // channel 0-3

Marlin/drivers.h

@@ -0,0 +1,73 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef _DRIVERS_H_
+#define _DRIVERS_H_
+
+#include "MarlinConfig.h"
+
+#define A4988               0x001
+#define DRV8825             0x002
+#define LV8729              0x003
+#define L6470               0x104
+#define TB6560              0x005
+#define TB6600              0x006
+#define TMC2100             0x007
+#define TMC2130             0x108
+#define TMC2130_STANDALONE  0x008
+#define TMC2208             0x109
+#define TMC2208_STANDALONE  0x009
+#define TMC26X              0x10A
+#define TMC26X_STANDALONE   0x00A
+#define TMC2660             0x10B
+#define TMC2660_STANDALONE  0x00B
+
+#define _AXIS_DRIVER_TYPE(A,T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) )
+
+#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T)
+#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T)
+#define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T)
+#define AXIS_DRIVER_TYPE_X2(T) (ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T)
+#define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T))
+#define AXIS_DRIVER_TYPE_Z2(T) (ENABLED(Z_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z2,T))
+#define AXIS_DRIVER_TYPE_E0(T) (E_STEPPERS > 0 && _AXIS_DRIVER_TYPE(E0,T))
+#define AXIS_DRIVER_TYPE_E1(T) (E_STEPPERS > 1 && _AXIS_DRIVER_TYPE(E1,T))
+#define AXIS_DRIVER_TYPE_E2(T) (E_STEPPERS > 2 && _AXIS_DRIVER_TYPE(E2,T))
+#define AXIS_DRIVER_TYPE_E3(T) (E_STEPPERS > 3 && _AXIS_DRIVER_TYPE(E3,T))
+#define AXIS_DRIVER_TYPE_E4(T) (E_STEPPERS > 4 && _AXIS_DRIVER_TYPE(E4,T))
+
+#define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T)
+
+#define HAS_DRIVER(T)  (AXIS_DRIVER_TYPE_X(T)  || AXIS_DRIVER_TYPE_X2(T) || \
+                        AXIS_DRIVER_TYPE_Y(T)  || AXIS_DRIVER_TYPE_Y2(T) || \
+                        AXIS_DRIVER_TYPE_Z(T)  || AXIS_DRIVER_TYPE_Z2(T) || \
+                        AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) || \
+                        AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) || \
+                        AXIS_DRIVER_TYPE_E4(T) )
+
+// Test for supported TMC drivers that require advanced configuration
+// Does not match standalone configurations
+#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208))
+
+#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE_##A(TMC2130) || \
+                         AXIS_DRIVER_TYPE_##A(TMC2208) )
+
+#endif // _DRIVERS_H_

Marlin/duration_t.h

@@ -23,6 +23,9 @@
 #ifndef __DURATION_T__
 #define __DURATION_T__
 
+#include <stdio.h>
+#include <inttypes.h>
+
 struct duration_t {
   /**
    * @brief Duration is stored in seconds
@@ -151,10 +154,10 @@ struct duration_t {
     if (with_days) {
       uint16_t d = this->day();
       sprintf_P(buffer, PSTR("%ud %02u:%02u"), d, h % 24, m);
-      return d >= 10 ? 8 : 7;
+      return d >= 10 ? 9 : 8;
     }
     else if (h < 100) {
-      sprintf_P(buffer, PSTR("%02u:%02u"), h % 24, m);
+      sprintf_P(buffer, PSTR("%02u:%02u"), h, m);
       return 5;
     }
     else {

Marlin/emergency_parser.cpp

@@ -0,0 +1,40 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * emergency_parser.cpp - Intercept special commands directly in the serial stream
+ */
+
+#include "MarlinConfig.h"
+
+#if ENABLED(EMERGENCY_PARSER)
+
+#include "emergency_parser.h"
+
+// Static data members
+bool EmergencyParser::killed_by_M112; // = false
+EmergencyParser::State EmergencyParser::state; // = EP_RESET
+
+// Global instance
+EmergencyParser emergency_parser;
+
+#endif // EMERGENCY_PARSER

Marlin/emergency_parser.h

@@ -0,0 +1,144 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * emergency_parser.h - Intercept special commands directly in the serial stream
+ */
+
+#ifndef _EMERGENCY_PARSER_H_
+#define _EMERGENCY_PARSER_H_
+
+// External references
+extern volatile bool wait_for_user, wait_for_heatup;
+void quickstop_stepper();
+
+class EmergencyParser {
+
+public:
+
+  // Currently looking for: M108, M112, M410
+  enum State : char {
+    EP_RESET,
+    EP_N,
+    EP_M,
+    EP_M1,
+    EP_M10,
+    EP_M108,
+    EP_M11,
+    EP_M112,
+    EP_M4,
+    EP_M41,
+    EP_M410,
+    EP_IGNORE // to '\n'
+  };
+
+  static bool killed_by_M112;
+  static State state;
+
+  EmergencyParser() {}
+
+  __attribute__((always_inline)) inline
+  static void update(const uint8_t c) {
+
+    switch (state) {
+      case EP_RESET:
+        switch (c) {
+          case ' ': break;
+          case 'N': state = EP_N;      break;
+          case 'M': state = EP_M;      break;
+          default: state  = EP_IGNORE;
+        }
+        break;
+
+      case EP_N:
+        switch (c) {
+          case '0': case '1': case '2':
+          case '3': case '4': case '5':
+          case '6': case '7': case '8':
+          case '9': case '-': case ' ':   break;
+          case 'M': state = EP_M;      break;
+          default:  state = EP_IGNORE;
+        }
+        break;
+
+      case EP_M:
+        switch (c) {
+          case ' ': break;
+          case '1': state = EP_M1;     break;
+          case '4': state = EP_M4;     break;
+          default: state  = EP_IGNORE;
+        }
+        break;
+
+      case EP_M1:
+        switch (c) {
+          case '0': state = EP_M10;    break;
+          case '1': state = EP_M11;    break;
+          default: state  = EP_IGNORE;
+        }
+        break;
+
+      case EP_M10:
+        state = (c == '8') ? EP_M108 : EP_IGNORE;
+        break;
+
+      case EP_M11:
+        state = (c == '2') ? EP_M112 : EP_IGNORE;
+        break;
+
+      case EP_M4:
+        state = (c == '1') ? EP_M41 : EP_IGNORE;
+        break;
+
+      case EP_M41:
+        state = (c == '0') ? EP_M410 : EP_IGNORE;
+        break;
+
+      case EP_IGNORE:
+        if (c == '\n') state = EP_RESET;
+        break;
+
+      default:
+        if (c == '\n') {
+          switch (state) {
+            case EP_M108:
+              wait_for_user = wait_for_heatup = false;
+              break;
+            case EP_M112:
+              killed_by_M112 = true;
+              break;
+            case EP_M410:
+              quickstop_stepper();
+              break;
+            default:
+              break;
+          }
+          state = EP_RESET;
+        }
+    }
+  }
+
+};
+
+extern EmergencyParser emergency_parser;
+
+#endif // _EMERGENCY_PARSER_H_

Marlin/endstop_interrupts.h

@@ -24,7 +24,7 @@
  * Endstop Interrupts
  *
  * Without endstop interrupts the endstop pins must be polled continually in
- * the stepper-ISR via endstops.update(), most of the time finding no change.
+ * the temperature-ISR via endstops.update(), most of the time finding no change.
  * With this feature endstops.update() is called only when we know that at
  * least one endstop has changed state, saving valuable CPU cycles.
  *
@@ -40,6 +40,9 @@
 
 #include "macros.h"
 
+// One ISR for all EXT-Interrupts
+void endstop_ISR(void) { endstops.update(); }
+
 /**
  * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
  *
@@ -72,40 +75,30 @@
                                     0 )
 #endif
 
-volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail.
-                            // Must be reset to 0 by the test function when finished.
 
 // Install Pin change interrupt for a pin. Can be called multiple times.
-void pciSetup(byte pin) {
+void pciSetup(const int8_t pin) {
   SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
   SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
   SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
 }
 
-// This is what is really done inside the interrupts.
-FORCE_INLINE void endstop_ISR_worker( void ) {
-  e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
-}
-
-// Use one Routine to handle each group
-// One ISR for all EXT-Interrupts
-void endstop_ISR(void) { endstop_ISR_worker(); }
 
 // Handlers for pin change interrupts
 #ifdef PCINT0_vect
-  ISR(PCINT0_vect) { endstop_ISR_worker(); }
+  ISR(PCINT0_vect) { endstop_ISR(); }
 #endif
 
 #ifdef PCINT1_vect
-  ISR(PCINT1_vect) { endstop_ISR_worker(); }
+  ISR(PCINT1_vect) { endstop_ISR(); }
 #endif
 
 #ifdef PCINT2_vect
-  ISR(PCINT2_vect) { endstop_ISR_worker(); }
+  ISR(PCINT2_vect) { endstop_ISR(); }
 #endif
 
 #ifdef PCINT3_vect
-  ISR(PCINT3_vect) { endstop_ISR_worker(); }
+  ISR(PCINT3_vect) { endstop_ISR(); }
 #endif
 
 void setup_endstop_interrupts( void ) {

Marlin/endstops.cpp

@@ -31,28 +31,39 @@
 #include "stepper.h"
 #include "ultralcd.h"
 
-// TEST_ENDSTOP: test the old and the current status of an endstop
-#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits & old_endstop_bits, ENDSTOP))
+#if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+  #include "endstop_interrupts.h"
+#endif
 
 Endstops endstops;
 
 // public:
 
 bool Endstops::enabled, Endstops::enabled_globally; // Initialized by settings.load()
-volatile char Endstops::endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
+volatile uint8_t Endstops::hit_state;
 
-#if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
-  uint16_t
-#else
-  byte
+Endstops::esbits_t Endstops::live_state = 0;
+
+#if ENABLED(ENDSTOP_NOISE_FILTER)
+  Endstops::esbits_t Endstops::validated_live_state;
+  uint8_t Endstops::endstop_poll_count;
 #endif
-    Endstops::current_endstop_bits = 0,
-    Endstops::old_endstop_bits = 0;
 
 #if HAS_BED_PROBE
   volatile bool Endstops::z_probe_enabled = false;
 #endif
 
+// Initialized by settings.load()
+#if ENABLED(X_DUAL_ENDSTOPS)
+  float Endstops::x_endstop_adj;
+#endif
+#if ENABLED(Y_DUAL_ENDSTOPS)
+  float Endstops::y_endstop_adj;
+#endif
+#if ENABLED(Z_DUAL_ENDSTOPS)
+  float Endstops::z_endstop_adj;
+#endif
+
 /**
  * Class and Instance Methods
  */
@@ -163,10 +174,93 @@ void Endstops::init() {
     #endif
   #endif
 
+  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+    setup_endstop_interrupts();
+  #endif
+
+  // Enable endstops
+  enable_globally(
+    #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT)
+      true
+    #else
+      false
+    #endif
+  );
+
 } // Endstops::init
 
-void Endstops::report_state() {
-  if (endstop_hit_bits) {
+// Called at ~1KHz from Temperature ISR: Poll endstop state if required
+void Endstops::poll() {
+
+  #if ENABLED(PINS_DEBUGGING)
+    run_monitor();  // report changes in endstop status
+  #endif
+
+  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && ENABLED(ENDSTOP_NOISE_FILTER)
+    if (endstop_poll_count) update();
+  #elif DISABLED(ENDSTOP_INTERRUPTS_FEATURE) || ENABLED(ENDSTOP_NOISE_FILTER)
+    update();
+  #endif
+}
+
+void Endstops::enable_globally(const bool onoff) {
+  enabled_globally = enabled = onoff;
+
+  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+    update();
+  #endif
+}
+
+// Enable / disable endstop checking
+void Endstops::enable(const bool onoff) {
+  enabled = onoff;
+
+  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+    update();
+  #endif
+}
+
+// Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
+void Endstops::not_homing() {
+  enabled = enabled_globally;
+
+  #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+    update();
+  #endif
+}
+
+#if ENABLED(VALIDATE_HOMING_ENDSTOPS)
+  // If the last move failed to trigger an endstop, call kill
+  void Endstops::validate_homing_move() {
+    if (trigger_state()) hit_on_purpose();
+    else kill(PSTR(MSG_ERR_HOMING_FAILED));
+  }
+#endif
+
+// Enable / disable endstop z-probe checking
+#if HAS_BED_PROBE
+  void Endstops::enable_z_probe(const bool onoff) {
+    z_probe_enabled = onoff;
+
+    #if ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+      update();
+    #endif
+  }
+#endif
+
+#if ENABLED(PINS_DEBUGGING)
+  void Endstops::run_monitor() {
+    if (!monitor_flag) return;
+    static uint8_t monitor_count = 16;  // offset this check from the others
+    monitor_count += _BV(1);            //  15 Hz
+    monitor_count &= 0x7F;
+    if (!monitor_count) monitor();      // report changes in endstop status
+  }
+#endif
+
+void Endstops::event_handler() {
+  static uint8_t prev_hit_state; // = 0
+  if (hit_state && hit_state != prev_hit_state) {
     #if ENABLED(ULTRA_LCD)
       char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
       #define _SET_STOP_CHAR(A,C) (chr## A = C)
@@ -175,11 +269,11 @@ void Endstops::report_state() {
     #endif
 
     #define _ENDSTOP_HIT_ECHO(A,C) do{ \
-      SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", stepper.triggered_position_mm(A ##_AXIS)); \
+      SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", planner.triggered_position_mm(_AXIS(A))); \
       _SET_STOP_CHAR(A,C); }while(0)
 
     #define _ENDSTOP_HIT_TEST(A,C) \
-      if (TEST(endstop_hit_bits, A ##_MIN) || TEST(endstop_hit_bits, A ##_MAX)) \
+      if (TEST(hit_state, A ##_MIN) || TEST(hit_state, A ##_MAX)) \
         _ENDSTOP_HIT_ECHO(A,C)
 
     #define ENDSTOP_HIT_TEST_X() _ENDSTOP_HIT_TEST(X,'X')
@@ -194,7 +288,7 @@ void Endstops::report_state() {
 
     #if ENABLED(Z_MIN_PROBE_ENDSTOP)
       #define P_AXIS Z_AXIS
-      if (TEST(endstop_hit_bits, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
+      if (TEST(hit_state, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
     #endif
     SERIAL_EOL();
 
@@ -202,10 +296,8 @@ void Endstops::report_state() {
       lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
     #endif
 
-    hit_on_purpose();
-
     #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
-      if (stepper.abort_on_endstop_hit) {
+      if (planner.abort_on_endstop_hit) {
         card.sdprinting = false;
         card.closefile();
         quickstop_stepper();
@@ -213,14 +305,19 @@ void Endstops::report_state() {
       }
     #endif
   }
+  prev_hit_state = hit_state;
 } // Endstops::report_state
 
-void Endstops::M119() {
+static void print_es_state(const bool is_hit, const char * const label=NULL) {
+  if (label) serialprintPGM(label);
+  SERIAL_PROTOCOLPGM(": ");
+  serialprintPGM(is_hit ? PSTR(MSG_ENDSTOP_HIT) : PSTR(MSG_ENDSTOP_OPEN));
+  SERIAL_EOL();
+}
+
+void _O2 Endstops::M119() {
   SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT);
-  #define ES_REPORT(AXIS) do{ \
-    SERIAL_PROTOCOLPGM(MSG_##AXIS); \
-    SERIAL_PROTOCOLLN(((READ(AXIS##_PIN)^AXIS##_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN)); \
-  }while(0)
+  #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S))
   #if HAS_X_MIN
     ES_REPORT(X_MIN);
   #endif
@@ -258,152 +355,61 @@ void Endstops::M119() {
     ES_REPORT(Z2_MAX);
   #endif
   #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-    SERIAL_PROTOCOLPGM(MSG_Z_PROBE);
-    SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+    print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE));
   #endif
   #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-    SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
-    SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+    #if NUM_RUNOUT_SENSORS == 1
+      print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING, PSTR(MSG_FILAMENT_RUNOUT_SENSOR));
+    #else
+      for (uint8_t i = 1; i <= NUM_RUNOUT_SENSORS; i++) {
+        pin_t pin;
+        switch (i) {
+          default: continue;
+          case 1: pin = FIL_RUNOUT_PIN; break;
+          case 2: pin = FIL_RUNOUT2_PIN; break;
+          #if NUM_RUNOUT_SENSORS > 2
+            case 3: pin = FIL_RUNOUT3_PIN; break;
+            #if NUM_RUNOUT_SENSORS > 3
+              case 4: pin = FIL_RUNOUT4_PIN; break;
+              #if NUM_RUNOUT_SENSORS > 4
+                case 5: pin = FIL_RUNOUT5_PIN; break;
+              #endif
+            #endif
+          #endif
+        }
+        SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
+        if (i > 1) { SERIAL_CHAR(' '); SERIAL_CHAR('0' + i); }
+        print_es_state(digitalRead(pin) != FIL_RUNOUT_INVERTING);
+      }
+    #endif
   #endif
 } // Endstops::M119
 
-#if ENABLED(X_DUAL_ENDSTOPS)
-  void Endstops::test_dual_x_endstops(const EndstopEnum es1, const EndstopEnum es2) {
-    byte x_test = TEST_ENDSTOP(es1) | (TEST_ENDSTOP(es2) << 1); // bit 0 for X, bit 1 for X2
-    if (x_test && stepper.current_block->steps[X_AXIS] > 0) {
-      SBI(endstop_hit_bits, X_MIN);
-      if (!stepper.performing_homing || (x_test == 0x3))  //if not performing home or if both endstops were trigged during homing...
-        stepper.kill_current_block();
-    }
-  }
-#endif
-#if ENABLED(Y_DUAL_ENDSTOPS)
-  void Endstops::test_dual_y_endstops(const EndstopEnum es1, const EndstopEnum es2) {
-    byte y_test = TEST_ENDSTOP(es1) | (TEST_ENDSTOP(es2) << 1); // bit 0 for Y, bit 1 for Y2
-    if (y_test && stepper.current_block->steps[Y_AXIS] > 0) {
-      SBI(endstop_hit_bits, Y_MIN);
-      if (!stepper.performing_homing || (y_test == 0x3))  //if not performing home or if both endstops were trigged during homing...
-        stepper.kill_current_block();
-    }
-  }
-#endif
-#if ENABLED(Z_DUAL_ENDSTOPS)
-  void Endstops::test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2) {
-    byte z_test = TEST_ENDSTOP(es1) | (TEST_ENDSTOP(es2) << 1); // bit 0 for Z, bit 1 for Z2
-    if (z_test && stepper.current_block->steps[Z_AXIS] > 0) {
-      SBI(endstop_hit_bits, Z_MIN);
-      if (!stepper.performing_homing || (z_test == 0x3))  //if not performing home or if both endstops were trigged during homing...
-        stepper.kill_current_block();
-    }
-  }
-#endif
+// The following routines are called from an ISR context. It could be the temperature ISR, the
+// endstop ISR or the Stepper ISR.
 
-// Check endstops - Called from ISR!
+#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
+#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
+#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
+
+// Check endstops - Could be called from Temperature ISR!
 void Endstops::update() {
 
-  #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
-  #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
-  #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
-  #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX))
+  #if DISABLED(ENDSTOP_NOISE_FILTER)
+    if (!abort_enabled()) return;
+  #endif
 
-  // UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
-  #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
-  // COPY_BIT: copy the value of SRC_BIT to DST_BIT in DST
-  #define COPY_BIT(DST, SRC_BIT, DST_BIT) SET_BIT(DST, DST_BIT, TEST(DST, SRC_BIT))
-
-  #define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
-      UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \
-      if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \
-        _ENDSTOP_HIT(AXIS, MINMAX); \
-        stepper.endstop_triggered(_AXIS(AXIS)); \
-      } \
-    }while(0)
+  #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT_TO(live_state, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
+  #define COPY_LIVE_STATE(SRC_BIT, DST_BIT) SET_BIT_TO(live_state, DST_BIT, TEST(live_state, SRC_BIT))
 
   #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
     // If G38 command is active check Z_MIN_PROBE for ALL movement
-    if (G38_move) {
-      UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
-      if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
-        if      (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); }
-        else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); }
-        else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); }
-        G38_endstop_hit = true;
-      }
-    }
-  #endif
-
-  /**
-   * Define conditions for checking endstops
-   */
-
-  #if IS_CORE
-    #define S_(N) stepper.current_block->steps[CORE_AXIS_##N]
-    #define D_(N) stepper.motor_direction(CORE_AXIS_##N)
-  #endif
-
-  #if CORE_IS_XY || CORE_IS_XZ
-    /**
-     * Head direction in -X axis for CoreXY and CoreXZ bots.
-     *
-     * If steps differ, both axes are moving.
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below)
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X)
-     */
-    #if ENABLED(COREXY) || ENABLED(COREXZ)
-      #define X_CMP ==
-    #else
-      #define X_CMP !=
-    #endif
-    #define X_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) X_CMP D_(2)) )
-    #define X_AXIS_HEAD X_HEAD
-  #else
-    #define X_MOVE_TEST stepper.current_block->steps[X_AXIS] > 0
-    #define X_AXIS_HEAD X_AXIS
-  #endif
-
-  #if CORE_IS_XY || CORE_IS_YZ
-    /**
-     * Head direction in -Y axis for CoreXY / CoreYZ bots.
-     *
-     * If steps differ, both axes are moving
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y)
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z)
-     */
-    #if ENABLED(COREYX) || ENABLED(COREYZ)
-      #define Y_CMP ==
-    #else
-      #define Y_CMP !=
-    #endif
-    #define Y_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Y_CMP D_(2)) )
-    #define Y_AXIS_HEAD Y_HEAD
-  #else
-    #define Y_MOVE_TEST stepper.current_block->steps[Y_AXIS] > 0
-    #define Y_AXIS_HEAD Y_AXIS
-  #endif
-
-  #if CORE_IS_XZ || CORE_IS_YZ
-    /**
-     * Head direction in -Z axis for CoreXZ or CoreYZ bots.
-     *
-     * If steps differ, both axes are moving
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y, already handled above)
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z)
-     */
-    #if ENABLED(COREZX) || ENABLED(COREZY)
-      #define Z_CMP ==
-    #else
-      #define Z_CMP !=
-    #endif
-    #define Z_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Z_CMP D_(2)) )
-    #define Z_AXIS_HEAD Z_HEAD
-  #else
-    #define Z_MOVE_TEST stepper.current_block->steps[Z_AXIS] > 0
-    #define Z_AXIS_HEAD Z_AXIS
+    if (G38_move) UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
   #endif
 
   // With Dual X, endstops are only checked in the homing direction for the active extruder
   #if ENABLED(DUAL_X_CARRIAGE)
-    #define E0_ACTIVE stepper.current_block->active_extruder == 0
+    #define E0_ACTIVE stepper.movement_extruder() == 0
     #define X_MIN_TEST ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE))
     #define X_MAX_TEST ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE))
   #else
@@ -411,124 +417,358 @@ void Endstops::update() {
     #define X_MAX_TEST true
   #endif
 
+  // Use HEAD for core axes, AXIS for others
+  #if CORE_IS_XY || CORE_IS_XZ
+    #define X_AXIS_HEAD X_HEAD
+  #else
+    #define X_AXIS_HEAD X_AXIS
+  #endif
+  #if CORE_IS_XY || CORE_IS_YZ
+    #define Y_AXIS_HEAD Y_HEAD
+  #else
+    #define Y_AXIS_HEAD Y_AXIS
+  #endif
+  #if CORE_IS_XZ || CORE_IS_YZ
+    #define Z_AXIS_HEAD Z_HEAD
+  #else
+    #define Z_AXIS_HEAD Z_AXIS
+  #endif
+
   /**
-   * Check and update endstops according to conditions
+   * Check and update endstops
    */
-  if (X_MOVE_TEST) {
+  #if HAS_X_MIN
+    #if ENABLED(X_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(X, MIN);
+      #if HAS_X2_MIN
+        UPDATE_ENDSTOP_BIT(X2, MIN);
+      #else
+        COPY_LIVE_STATE(X_MIN, X2_MIN);
+      #endif
+    #else
+      UPDATE_ENDSTOP_BIT(X, MIN);
+    #endif
+  #endif
+
+  #if HAS_X_MAX
+    #if ENABLED(X_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(X, MAX);
+      #if HAS_X2_MAX
+        UPDATE_ENDSTOP_BIT(X2, MAX);
+      #else
+        COPY_LIVE_STATE(X_MAX, X2_MAX);
+      #endif
+    #else
+      UPDATE_ENDSTOP_BIT(X, MAX);
+    #endif
+  #endif
+
+  #if HAS_Y_MIN
+    #if ENABLED(Y_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(Y, MIN);
+      #if HAS_Y2_MIN
+        UPDATE_ENDSTOP_BIT(Y2, MIN);
+      #else
+        COPY_LIVE_STATE(Y_MIN, Y2_MIN);
+      #endif
+    #else
+      UPDATE_ENDSTOP_BIT(Y, MIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MAX
+    #if ENABLED(Y_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(Y, MAX);
+      #if HAS_Y2_MAX
+        UPDATE_ENDSTOP_BIT(Y2, MAX);
+      #else
+        COPY_LIVE_STATE(Y_MAX, Y2_MAX);
+      #endif
+    #else
+      UPDATE_ENDSTOP_BIT(Y, MAX);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN
+    #if ENABLED(Z_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(Z, MIN);
+      #if HAS_Z2_MIN
+        UPDATE_ENDSTOP_BIT(Z2, MIN);
+      #else
+        COPY_LIVE_STATE(Z_MIN, Z2_MIN);
+      #endif
+    #elif ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+      UPDATE_ENDSTOP_BIT(Z, MIN);
+    #elif Z_HOME_DIR < 0
+      UPDATE_ENDSTOP_BIT(Z, MIN);
+    #endif
+  #endif
+
+  // When closing the gap check the enabled probe
+  #if ENABLED(Z_MIN_PROBE_ENDSTOP)
+    UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
+  #endif
+
+  #if HAS_Z_MAX
+    // Check both Z dual endstops
+    #if ENABLED(Z_DUAL_ENDSTOPS)
+      UPDATE_ENDSTOP_BIT(Z, MAX);
+      #if HAS_Z2_MAX
+        UPDATE_ENDSTOP_BIT(Z2, MAX);
+      #else
+        COPY_LIVE_STATE(Z_MAX, Z2_MAX);
+      #endif
+    #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
+      // If this pin isn't the bed probe it's the Z endstop
+      UPDATE_ENDSTOP_BIT(Z, MAX);
+    #endif
+  #endif
+
+  #if ENABLED(ENDSTOP_NOISE_FILTER)
+    /**
+     * Filtering out noise on endstops requires a delayed decision. Let's assume, due to noise,
+     * that 50% of endstop signal samples are good and 50% are bad (assuming normal distribution
+     * of random noise). Then the first sample has a 50% chance to be good or bad. The 2nd sample
+     * also has a 50% chance to be good or bad. The chances of 2 samples both being bad becomes
+     * 50% of 50%, or 25%. That was the previous implementation of Marlin endstop handling. It
+     * reduces chances of bad readings in half, at the cost of 1 extra sample period, but chances
+     * still exist. The only way to reduce them further is to increase the number of samples.
+     * To reduce the chance to 1% (1/128th) requires 7 samples (adding 7ms of delay).
+     */
+    static esbits_t old_live_state;
+    if (old_live_state != live_state) {
+      endstop_poll_count = 7;
+      old_live_state = live_state;
+    }
+    else if (endstop_poll_count && !--endstop_poll_count)
+      validated_live_state = live_state;
+
+    if (!abort_enabled()) return;
+
+  #endif
+
+  // Test the current status of an endstop
+  #define TEST_ENDSTOP(ENDSTOP) (TEST(state(), ENDSTOP))
+
+  // Record endstop was hit
+  #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(hit_state, _ENDSTOP(AXIS, MINMAX))
+
+  // Call the endstop triggered routine for single endstops
+  #define PROCESS_ENDSTOP(AXIS,MINMAX) do { \
+    if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX))) { \
+      _ENDSTOP_HIT(AXIS, MINMAX); \
+      planner.endstop_triggered(_AXIS(AXIS)); \
+    } \
+  }while(0)
+
+  // Call the endstop triggered routine for dual endstops
+  #define PROCESS_DUAL_ENDSTOP(AXIS1, AXIS2, MINMAX) do { \
+    const byte dual_hit = TEST_ENDSTOP(_ENDSTOP(AXIS1, MINMAX)) | (TEST_ENDSTOP(_ENDSTOP(AXIS2, MINMAX)) << 1); \
+    if (dual_hit) { \
+      _ENDSTOP_HIT(AXIS1, MINMAX); \
+      /* if not performing home or if both endstops were trigged during homing... */ \
+      if (!stepper.homing_dual_axis || dual_hit == 0b11) \
+        planner.endstop_triggered(_AXIS(AXIS1)); \
+    } \
+  }while(0)
+
+  #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
+    // If G38 command is active check Z_MIN_PROBE for ALL movement
+    if (G38_move) {
+      if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
+        if      (stepper.axis_is_moving(X_AXIS)) { _ENDSTOP_HIT(X, MIN); planner.endstop_triggered(X_AXIS); }
+        else if (stepper.axis_is_moving(Y_AXIS)) { _ENDSTOP_HIT(Y, MIN); planner.endstop_triggered(Y_AXIS); }
+        else if (stepper.axis_is_moving(Z_AXIS)) { _ENDSTOP_HIT(Z, MIN); planner.endstop_triggered(Z_AXIS); }
+        G38_endstop_hit = true;
+      }
+    }
+  #endif
+
+  // Now, we must signal, after validation, if an endstop limit is pressed or not
+  if (stepper.axis_is_moving(X_AXIS)) {
     if (stepper.motor_direction(X_AXIS_HEAD)) { // -direction
       #if HAS_X_MIN
         #if ENABLED(X_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(X, MIN);
-          #if HAS_X2_MIN
-            UPDATE_ENDSTOP_BIT(X2, MIN);
-          #else
-            COPY_BIT(current_endstop_bits, X_MIN, X2_MIN);
-          #endif
-          test_dual_x_endstops(X_MIN, X2_MIN);
+          PROCESS_DUAL_ENDSTOP(X, X2, MIN);
         #else
-          if (X_MIN_TEST) UPDATE_ENDSTOP(X, MIN);
+          if (X_MIN_TEST) PROCESS_ENDSTOP(X, MIN);
         #endif
       #endif
     }
     else { // +direction
       #if HAS_X_MAX
         #if ENABLED(X_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(X, MAX);
-          #if HAS_X2_MAX
-            UPDATE_ENDSTOP_BIT(X2, MAX);
-          #else
-            COPY_BIT(current_endstop_bits, X_MAX, X2_MAX);
-          #endif
-          test_dual_x_endstops(X_MAX, X2_MAX);
+          PROCESS_DUAL_ENDSTOP(X, X2, MAX);
         #else
-          if (X_MIN_TEST) UPDATE_ENDSTOP(X, MAX);
+          if (X_MAX_TEST) PROCESS_ENDSTOP(X, MAX);
         #endif
-
       #endif
     }
   }
 
-  if (Y_MOVE_TEST) {
+  if (stepper.axis_is_moving(Y_AXIS)) {
     if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
       #if HAS_Y_MIN
         #if ENABLED(Y_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(Y, MIN);
-          #if HAS_Y2_MIN
-            UPDATE_ENDSTOP_BIT(Y2, MIN);
-          #else
-            COPY_BIT(current_endstop_bits, Y_MIN, Y2_MIN);
-          #endif
-          test_dual_y_endstops(Y_MIN, Y2_MIN);
+          PROCESS_DUAL_ENDSTOP(Y, Y2, MIN);
         #else
-          UPDATE_ENDSTOP(Y, MIN);
+          PROCESS_ENDSTOP(Y, MIN);
         #endif
       #endif
     }
     else { // +direction
       #if HAS_Y_MAX
         #if ENABLED(Y_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(Y, MAX);
-          #if HAS_Y2_MAX
-            UPDATE_ENDSTOP_BIT(Y2, MAX);
-          #else
-            COPY_BIT(current_endstop_bits, Y_MAX, Y2_MAX);
-          #endif
-          test_dual_y_endstops(Y_MAX, Y2_MAX);
+          PROCESS_DUAL_ENDSTOP(Y, Y2, MAX);
         #else
-          UPDATE_ENDSTOP(Y, MAX);
+          PROCESS_ENDSTOP(Y, MAX);
         #endif
       #endif
     }
   }
 
-  if (Z_MOVE_TEST) {
+  if (stepper.axis_is_moving(Z_AXIS)) {
     if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
       #if HAS_Z_MIN
         #if ENABLED(Z_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(Z, MIN);
-          #if HAS_Z2_MIN
-            UPDATE_ENDSTOP_BIT(Z2, MIN);
-          #else
-            COPY_BIT(current_endstop_bits, Z_MIN, Z2_MIN);
-          #endif
-          test_dual_z_endstops(Z_MIN, Z2_MIN);
+          PROCESS_DUAL_ENDSTOP(Z, Z2, MIN);
         #else
           #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-            if (z_probe_enabled) UPDATE_ENDSTOP(Z, MIN);
+            if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
+          #elif ENABLED(Z_MIN_PROBE_ENDSTOP)
+            if (!z_probe_enabled) PROCESS_ENDSTOP(Z, MIN);
           #else
-            UPDATE_ENDSTOP(Z, MIN);
+            PROCESS_ENDSTOP(Z, MIN);
           #endif
         #endif
       #endif
 
       // When closing the gap check the enabled probe
       #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-        if (z_probe_enabled) {
-          UPDATE_ENDSTOP(Z, MIN_PROBE);
-          if (TEST_ENDSTOP(Z_MIN_PROBE)) SBI(endstop_hit_bits, Z_MIN_PROBE);
-        }
+        if (z_probe_enabled) PROCESS_ENDSTOP(Z, MIN_PROBE);
       #endif
     }
     else { // Z +direction. Gantry up, bed down.
       #if HAS_Z_MAX
-        // Check both Z dual endstops
         #if ENABLED(Z_DUAL_ENDSTOPS)
-          UPDATE_ENDSTOP_BIT(Z, MAX);
-          #if HAS_Z2_MAX
-            UPDATE_ENDSTOP_BIT(Z2, MAX);
-          #else
-            COPY_BIT(current_endstop_bits, Z_MAX, Z2_MAX);
-          #endif
-          test_dual_z_endstops(Z_MAX, Z2_MAX);
-        // If this pin is not hijacked for the bed probe
-        // then it belongs to the Z endstop
+          PROCESS_DUAL_ENDSTOP(Z, Z2, MAX);
         #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
-          UPDATE_ENDSTOP(Z, MAX);
+          // If this pin is not hijacked for the bed probe
+          // then it belongs to the Z endstop
+          PROCESS_ENDSTOP(Z, MAX);
         #endif
       #endif
     }
   }
-
-  old_endstop_bits = current_endstop_bits;
-
 } // Endstops::update()
+
+#if ENABLED(PINS_DEBUGGING)
+
+  bool Endstops::monitor_flag = false;
+
+  /**
+   * monitors endstops & Z probe for changes
+   *
+   * If a change is detected then the LED is toggled and
+   * a message is sent out the serial port
+   *
+   * Yes, we could miss a rapid back & forth change but
+   * that won't matter because this is all manual.
+   *
+   */
+  void Endstops::monitor() {
+
+    static uint16_t old_live_state_local = 0;
+    static uint8_t local_LED_status = 0;
+    uint16_t live_state_local = 0;
+
+    #if HAS_X_MIN
+      if (READ(X_MIN_PIN)) SBI(live_state_local, X_MIN);
+    #endif
+    #if HAS_X_MAX
+      if (READ(X_MAX_PIN)) SBI(live_state_local, X_MAX);
+    #endif
+    #if HAS_Y_MIN
+      if (READ(Y_MIN_PIN)) SBI(live_state_local, Y_MIN);
+    #endif
+    #if HAS_Y_MAX
+      if (READ(Y_MAX_PIN)) SBI(live_state_local, Y_MAX);
+    #endif
+    #if HAS_Z_MIN
+      if (READ(Z_MIN_PIN)) SBI(live_state_local, Z_MIN);
+    #endif
+    #if HAS_Z_MAX
+      if (READ(Z_MAX_PIN)) SBI(live_state_local, Z_MAX);
+    #endif
+    #if HAS_Z_MIN_PROBE_PIN
+      if (READ(Z_MIN_PROBE_PIN)) SBI(live_state_local, Z_MIN_PROBE);
+    #endif
+    #if HAS_X2_MIN
+      if (READ(X2_MIN_PIN)) SBI(live_state_local, X2_MIN);
+    #endif
+    #if HAS_X2_MAX
+      if (READ(X2_MAX_PIN)) SBI(live_state_local, X2_MAX);
+    #endif
+    #if HAS_Y2_MIN
+      if (READ(Y2_MIN_PIN)) SBI(live_state_local, Y2_MIN);
+    #endif
+    #if HAS_Y2_MAX
+      if (READ(Y2_MAX_PIN)) SBI(live_state_local, Y2_MAX);
+    #endif
+    #if HAS_Z2_MIN
+      if (READ(Z2_MIN_PIN)) SBI(live_state_local, Z2_MIN);
+    #endif
+    #if HAS_Z2_MAX
+      if (READ(Z2_MAX_PIN)) SBI(live_state_local, Z2_MAX);
+    #endif
+
+    uint16_t endstop_change = live_state_local ^ old_live_state_local;
+
+    if (endstop_change) {
+      #if HAS_X_MIN
+        if (TEST(endstop_change, X_MIN)) SERIAL_PROTOCOLPAIR("  X_MIN:", TEST(live_state_local, X_MIN));
+      #endif
+      #if HAS_X_MAX
+        if (TEST(endstop_change, X_MAX)) SERIAL_PROTOCOLPAIR("  X_MAX:", TEST(live_state_local, X_MAX));
+      #endif
+      #if HAS_Y_MIN
+        if (TEST(endstop_change, Y_MIN)) SERIAL_PROTOCOLPAIR("  Y_MIN:", TEST(live_state_local, Y_MIN));
+      #endif
+      #if HAS_Y_MAX
+        if (TEST(endstop_change, Y_MAX)) SERIAL_PROTOCOLPAIR("  Y_MAX:", TEST(live_state_local, Y_MAX));
+      #endif
+      #if HAS_Z_MIN
+        if (TEST(endstop_change, Z_MIN)) SERIAL_PROTOCOLPAIR("  Z_MIN:", TEST(live_state_local, Z_MIN));
+      #endif
+      #if HAS_Z_MAX
+        if (TEST(endstop_change, Z_MAX)) SERIAL_PROTOCOLPAIR("  Z_MAX:", TEST(live_state_local, Z_MAX));
+      #endif
+      #if HAS_Z_MIN_PROBE_PIN
+        if (TEST(endstop_change, Z_MIN_PROBE)) SERIAL_PROTOCOLPAIR("  PROBE:", TEST(live_state_local, Z_MIN_PROBE));
+      #endif
+      #if HAS_X2_MIN
+        if (TEST(endstop_change, X2_MIN)) SERIAL_PROTOCOLPAIR("  X2_MIN:", TEST(live_state_local, X2_MIN));
+      #endif
+      #if HAS_X2_MAX
+        if (TEST(endstop_change, X2_MAX)) SERIAL_PROTOCOLPAIR("  X2_MAX:", TEST(live_state_local, X2_MAX));
+      #endif
+      #if HAS_Y2_MIN
+        if (TEST(endstop_change, Y2_MIN)) SERIAL_PROTOCOLPAIR("  Y2_MIN:", TEST(live_state_local, Y2_MIN));
+      #endif
+      #if HAS_Y2_MAX
+        if (TEST(endstop_change, Y2_MAX)) SERIAL_PROTOCOLPAIR("  Y2_MAX:", TEST(live_state_local, Y2_MAX));
+      #endif
+      #if HAS_Z2_MIN
+        if (TEST(endstop_change, Z2_MIN)) SERIAL_PROTOCOLPAIR("  Z2_MIN:", TEST(live_state_local, Z2_MIN));
+      #endif
+      #if HAS_Z2_MAX
+        if (TEST(endstop_change, Z2_MAX)) SERIAL_PROTOCOLPAIR("  Z2_MAX:", TEST(live_state_local, Z2_MAX));
+      #endif
+      SERIAL_PROTOCOLPGM("\n\n");
+      analogWrite(LED_PIN, local_LED_status);
+      local_LED_status ^= 255;
+      old_live_state_local = live_state_local;
+    }
+  }
+
+#endif // PINS_DEBUGGING

Marlin/endstops.h

@@ -21,53 +21,115 @@
  */
 
 /**
- *  endstops.h - manages endstops
+ * endstops.h - manages endstops
  */
 
-#ifndef ENDSTOPS_H
-#define ENDSTOPS_H
+#ifndef __ENDSTOPS_H__
+#define __ENDSTOPS_H__
 
-#include "enum.h"
 #include "MarlinConfig.h"
 
+#define VALIDATE_HOMING_ENDSTOPS
+
+enum EndstopEnum : char {
+  X_MIN,
+  Y_MIN,
+  Z_MIN,
+  Z_MIN_PROBE,
+  X_MAX,
+  Y_MAX,
+  Z_MAX,
+  X2_MIN,
+  X2_MAX,
+  Y2_MIN,
+  Y2_MAX,
+  Z2_MIN,
+  Z2_MAX
+};
+
 class Endstops {
 
   public:
 
     static bool enabled, enabled_globally;
-    static volatile char endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
 
     #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS)
-      static uint16_t
+      typedef uint16_t esbits_t;
+      #if ENABLED(X_DUAL_ENDSTOPS)
+        static float x_endstop_adj;
+      #endif
+      #if ENABLED(Y_DUAL_ENDSTOPS)
+        static float y_endstop_adj;
+      #endif
+      #if ENABLED(Z_DUAL_ENDSTOPS)
+        static float z_endstop_adj;
+      #endif
     #else
-      static byte
+      typedef uint8_t esbits_t;
     #endif
-        current_endstop_bits, old_endstop_bits;
 
-    Endstops() {
-      enable_globally(
-        #if ENABLED(ENDSTOPS_ALWAYS_ON_DEFAULT)
-          true
-        #else
-          false
-        #endif
-      );
-    };
+  private:
+    static esbits_t live_state;
+    static volatile uint8_t hit_state;      // Use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT index
+
+    #if ENABLED(ENDSTOP_NOISE_FILTER)
+      static esbits_t validated_live_state;
+      static uint8_t endstop_poll_count;    // Countdown from threshold for polling
+    #endif
+
+  public:
+    Endstops() {};
 
     /**
      * Initialize the endstop pins
      */
-    void init();
+    static void init();
 
     /**
-     * Update the endstops bits from the pins
+     * Are endstops or the probe set to abort the move?
+     */
+    FORCE_INLINE static bool abort_enabled() {
+      return (enabled
+        #if HAS_BED_PROBE
+          || z_probe_enabled
+        #endif
+      );
+    }
+
+    /**
+     * Periodic call to poll endstops if required. Called from temperature ISR
+     */
+    static void poll();
+
+    /**
+     * Update endstops bits from the pins. Apply filtering to get a verified state.
+     * If abort_enabled() and moving towards a triggered switch, abort the current move.
+     * Called from ISR contexts.
      */
     static void update();
 
     /**
-     * Print an error message reporting the position when the endstops were last hit.
+     * Get Endstop hit state.
      */
-    static void report_state(); //call from somewhere to create an serial error message with the locations the endstops where hit, in case they were triggered
+    FORCE_INLINE static uint8_t trigger_state() { return hit_state; }
+
+    /**
+     * Get current endstops state
+     */
+    FORCE_INLINE static esbits_t state() {
+      return
+        #if ENABLED(ENDSTOP_NOISE_FILTER)
+          validated_live_state
+        #else
+          live_state
+        #endif
+      ;
+    }
+
+    /**
+     * Report endstop hits to serial. Called from loop().
+     */
+    static void event_handler();
 
     /**
      * Report endstop positions in response to M119
@@ -75,43 +137,38 @@ class Endstops {
     static void M119();
 
     // Enable / disable endstop checking globally
-    static void enable_globally(bool onoff=true) { enabled_globally = enabled = onoff; }
+    static void enable_globally(const bool onoff=true);
 
     // Enable / disable endstop checking
-    static void enable(bool onoff=true) { enabled = onoff; }
+    static void enable(const bool onoff=true);
 
     // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
-    static void not_homing() { enabled = enabled_globally; }
+    static void not_homing();
+
+    #if ENABLED(VALIDATE_HOMING_ENDSTOPS)
+      // If the last move failed to trigger an endstop, call kill
+      static void validate_homing_move();
+    #else
+      FORCE_INLINE static void validate_homing_move() { hit_on_purpose(); }
+    #endif
 
     // Clear endstops (i.e., they were hit intentionally) to suppress the report
-    static void hit_on_purpose() { endstop_hit_bits = 0; }
+    FORCE_INLINE static void hit_on_purpose() { hit_state = 0; }
 
     // Enable / disable endstop z-probe checking
     #if HAS_BED_PROBE
       static volatile bool z_probe_enabled;
-      static void enable_z_probe(bool onoff=true) { z_probe_enabled = onoff; }
+      static void enable_z_probe(const bool onoff=true);
     #endif
 
-  private:
-
-    #if ENABLED(X_DUAL_ENDSTOPS)
-      static void test_dual_x_endstops(const EndstopEnum es1, const EndstopEnum es2);
-    #endif
-    #if ENABLED(Y_DUAL_ENDSTOPS)
-      static void test_dual_y_endstops(const EndstopEnum es1, const EndstopEnum es2);
-    #endif
-    #if ENABLED(Z_DUAL_ENDSTOPS)
-      static void test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2);
+    // Debugging of endstops
+    #if ENABLED(PINS_DEBUGGING)
+      static bool monitor_flag;
+      static void monitor();
+      static void run_monitor();
     #endif
 };
 
 extern Endstops endstops;
 
-#if HAS_BED_PROBE
-  #define ENDSTOPS_ENABLED  (endstops.enabled || endstops.z_probe_enabled)
-#else
-  #define ENDSTOPS_ENABLED  endstops.enabled
-#endif
-
-
-#endif // ENDSTOPS_H
+#endif // __ENDSTOPS_H__

Marlin/enum.h

@@ -28,24 +28,27 @@
 /**
  * Axis indices as enumerated constants
  *
- * Special axis:
- *  - A_AXIS and B_AXIS are used by COREXY printers
- *  - X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship
- *    between X_AXIS and X Head movement, like CoreXY bots
+ *  - X_AXIS, Y_AXIS, and Z_AXIS should be used for axes in Cartesian space
+ *  - A_AXIS, B_AXIS, and C_AXIS should be used for Steppers, corresponding to XYZ on Cartesians
+ *  - X_HEAD, Y_HEAD, and Z_HEAD should be used for Steppers on Core kinematics
  */
-enum AxisEnum {
-  NO_AXIS   = -1,
+enum AxisEnum : unsigned char {
   X_AXIS    = 0,
   A_AXIS    = 0,
   Y_AXIS    = 1,
   B_AXIS    = 1,
   Z_AXIS    = 2,
   C_AXIS    = 2,
-  E_AXIS    = 3,
-  X_HEAD    = 4,
-  Y_HEAD    = 5,
-  Z_HEAD    = 6,
-  ALL_AXES  = 100
+  E_CART    = 3,
+  #if ENABLED(HANGPRINTER) // Hangprinter order: A_AXIS, B_AXIS, C_AXIS, D_AXIS, E_AXIS
+    D_AXIS  = 3,
+    E_AXIS  = 4,
+  #else
+    E_AXIS  = 3,
+  #endif
+  X_HEAD, Y_HEAD, Z_HEAD,
+  ALL_AXES  = 0xFE,
+  NO_AXIS   = 0xFF
 };
 
 #define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++)
@@ -55,8 +58,11 @@ enum AxisEnum {
 
 #define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS)
 #define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS)
-#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_AXIS)
+#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_CART)
 #define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N)
+#define LOOP_MOV_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, MOV_AXIS)
+#define LOOP_NUM_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS)
+#define LOOP_NUM_AXIS_N(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS_N)
 
 typedef enum {
   LINEARUNIT_MM,
@@ -73,7 +79,7 @@ typedef enum {
  * Debug flags
  * Not yet widely applied
  */
-enum DebugFlags {
+enum DebugFlags : unsigned char {
   DEBUG_NONE          = 0,
   DEBUG_ECHO          = _BV(0), ///< Echo commands in order as they are processed
   DEBUG_INFO          = _BV(1), ///< Print messages for code that has debug output
@@ -85,53 +91,23 @@ enum DebugFlags {
   DEBUG_ALL           = 0xFF
 };
 
-enum EndstopEnum {
-  X_MIN,
-  Y_MIN,
-  Z_MIN,
-  Z_MIN_PROBE,
-  X_MAX,
-  Y_MAX,
-  Z_MAX,
-  X2_MIN,
-  X2_MAX,
-  Y2_MIN,
-  Y2_MAX,
-  Z2_MIN,
-  Z2_MAX
-};
-
-#if ENABLED(EMERGENCY_PARSER)
-  enum e_parser_state {
-    state_RESET,
-    state_N,
-    state_M,
-    state_M1,
-    state_M10,
-    state_M108,
-    state_M11,
-    state_M112,
-    state_M4,
-    state_M41,
-    state_M410,
-    state_IGNORE // to '\n'
-  };
-#endif
-
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  enum AdvancedPauseMenuResponse {
+  enum AdvancedPauseMenuResponse : char {
     ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
     ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
     ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
   };
 
   #if ENABLED(ULTIPANEL)
-    enum AdvancedPauseMessage {
+    enum AdvancedPauseMessage : char {
       ADVANCED_PAUSE_MESSAGE_INIT,
       ADVANCED_PAUSE_MESSAGE_UNLOAD,
       ADVANCED_PAUSE_MESSAGE_INSERT,
       ADVANCED_PAUSE_MESSAGE_LOAD,
-      ADVANCED_PAUSE_MESSAGE_EXTRUDE,
+      ADVANCED_PAUSE_MESSAGE_PURGE,
+      #if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
+        ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE,
+      #endif
       ADVANCED_PAUSE_MESSAGE_OPTION,
       ADVANCED_PAUSE_MESSAGE_RESUME,
       ADVANCED_PAUSE_MESSAGE_STATUS,
@@ -139,6 +115,12 @@ enum EndstopEnum {
       ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
     };
   #endif
+
+  enum AdvancedPauseMode : char {
+    ADVANCED_PAUSE_MODE_PAUSE_PRINT,
+    ADVANCED_PAUSE_MODE_LOAD_FILAMENT,
+    ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT
+  };
 #endif
 
 /**
@@ -146,7 +128,7 @@ enum EndstopEnum {
  * Marlin sends messages if blocked or busy
  */
 #if ENABLED(HOST_KEEPALIVE_FEATURE)
-  enum MarlinBusyState {
+  enum MarlinBusyState : char {
     NOT_BUSY,           // Not in a handler
     IN_HANDLER,         // Processing a GCode
     IN_PROCESS,         // Known to be blocking command input (as in G29)
@@ -158,12 +140,12 @@ enum EndstopEnum {
 /**
  * SD Card
  */
-enum LsAction { LS_SerialPrint, LS_Count, LS_GetFilename };
+enum LsAction : char { LS_SerialPrint, LS_Count, LS_GetFilename };
 
 /**
  * Ultra LCD
  */
-enum LCDViewAction {
+enum LCDViewAction : char {
   LCDVIEW_NONE,
   LCDVIEW_REDRAW_NOW,
   LCDVIEW_CALL_REDRAW_NEXT,
@@ -175,7 +157,7 @@ enum LCDViewAction {
  * Dual X Carriage modes. A Dual Nozzle can also do duplication.
  */
 #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  enum DualXMode {
+  enum DualXMode : char {
     DXC_FULL_CONTROL_MODE,  // DUAL_X_CARRIAGE only
     DXC_AUTO_PARK_MODE,     // DUAL_X_CARRIAGE only
     DXC_DUPLICATION_MODE
@@ -187,7 +169,7 @@ enum LCDViewAction {
  * (and "canned cycles" - not a current feature)
  */
 #if ENABLED(CNC_WORKSPACE_PLANES)
-  enum WorkspacePlane { PLANE_XY, PLANE_ZX, PLANE_YZ };
+  enum WorkspacePlane : char { PLANE_XY, PLANE_ZX, PLANE_YZ };
 #endif
 
 #endif // __ENUM_H__

Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 //#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -232,6 +237,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -245,6 +259,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -253,7 +268,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -263,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -284,14 +301,15 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 7
-#define TEMP_SENSOR_1 7
+#define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 7
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -341,7 +359,7 @@
 #define PIDTEMP
 #define BANG_MAX 70      // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX  74      // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -354,52 +372,59 @@
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
   // Buda 2.0 on 24V
-  #define  DEFAULT_Kp 6
-  #define  DEFAULT_Ki .3
-  #define  DEFAULT_Kd 125
+  #define DEFAULT_Kp 6
+  #define DEFAULT_Ki .3
+  #define DEFAULT_Kd 125
 
   // Buda 2.0 on 12V
-  //#define  DEFAULT_Kp 22.2
-  //#define  DEFAULT_Ki 1.01
-  //#define  DEFAULT_Kd 114
+  //#define DEFAULT_Kp 22.2
+  //#define DEFAULT_Ki 1.01
+  //#define DEFAULT_Kd 114
 
   // Ultimaker
-  //#define  DEFAULT_Kp 22.2
-  //#define  DEFAULT_Ki 1.08
-  //#define  DEFAULT_Kd 114
+  //#define DEFAULT_Kp 22.2
+  //#define DEFAULT_Ki 1.08
+  //#define DEFAULT_Kd 114
 
   // MakerGear
-  //#define  DEFAULT_Kp 7.0
-  //#define  DEFAULT_Ki 0.1
-  //#define  DEFAULT_Kd 12
+  //#define DEFAULT_Kp 7.0
+  //#define DEFAULT_Ki 0.1
+  //#define DEFAULT_Kd 12
 
   // Mendel Parts V9 on 12V
-  //#define  DEFAULT_Kp 63.0
-  //#define  DEFAULT_Ki 2.25
-  //#define  DEFAULT_Kd 440
+  //#define DEFAULT_Kp 63.0
+  //#define DEFAULT_Ki 2.25
+  //#define DEFAULT_Kd 440
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 #define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 206 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -407,42 +432,47 @@
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //24V 360W silicone heater from NPH on 3mm borosilicate (TAZ 2.2+)
-  #define  DEFAULT_bedKp 20
-  #define  DEFAULT_bedKi 5
-  #define  DEFAULT_bedKd 275
+  #define DEFAULT_bedKp 20
+  #define DEFAULT_bedKi 5
+  #define DEFAULT_bedKd 275
 
   //12v 400W silicone heater from QUDB into 3mm borosilicate (TAZ 1.0+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 650
-  //#define  DEFAULT_bedKi 60
-  //#define  DEFAULT_bedKd 1800
+  //#define DEFAULT_bedKp 650
+  //#define DEFAULT_bedKi 60
+  //#define DEFAULT_bedKd 1800
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  //#define  DEFAULT_bedKp 10.00
-  //#define  DEFAULT_bedKi .023
-  //#define  DEFAULT_bedKd 305.4
+  //#define DEFAULT_bedKp 10.00
+  //#define DEFAULT_bedKi .023
+  //#define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 200
 
@@ -497,11 +527,10 @@
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -518,12 +547,52 @@
 #define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
+
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -588,9 +657,19 @@
  */
 #define DEFAULT_XJERK                  8.0
 #define DEFAULT_YJERK                  8.0
-#define DEFAULT_ZJERK                  0.4
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                 10.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -641,6 +720,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -651,7 +731,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -670,6 +750,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -707,13 +790,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -737,6 +823,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   15 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -772,9 +862,6 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -788,6 +875,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -820,7 +909,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -828,7 +917,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -836,18 +925,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -895,6 +989,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -917,12 +1017,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -934,13 +1034,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -963,17 +1060,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -982,27 +1068,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -1011,8 +1093,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -1024,6 +1119,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1174,7 +1274,7 @@
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1189,6 +1289,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1295,11 +1397,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1327,19 +1429,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1366,6 +1455,15 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
@@ -1430,12 +1528,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1453,40 +1557,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-//#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1495,28 +1565,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1524,33 +1572,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1566,12 +1609,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1596,6 +1640,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1611,24 +1732,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1644,6 +1757,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1653,11 +1773,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1717,7 +1866,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 4, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/AliExpress/CL-260/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 //#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -232,6 +237,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -245,6 +259,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -253,7 +268,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -263,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -284,7 +301,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
@@ -292,6 +309,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -341,7 +359,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -355,42 +373,49 @@
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
   // Ultimaker
-  #define  DEFAULT_Kp 22.2
-  #define  DEFAULT_Ki 1.08
-  #define  DEFAULT_Kd 114
+  #define DEFAULT_Kp 22.2
+  #define DEFAULT_Ki 1.08
+  #define DEFAULT_Kd 114
 
   // MakerGear
-  //#define  DEFAULT_Kp 7.0
-  //#define  DEFAULT_Ki 0.1
-  //#define  DEFAULT_Kd 12
+  //#define DEFAULT_Kp 7.0
+  //#define DEFAULT_Ki 0.1
+  //#define DEFAULT_Kd 12
 
   // Mendel Parts V9 on 12V
-  //#define  DEFAULT_Kp 63.0
-  //#define  DEFAULT_Ki 2.25
-  //#define  DEFAULT_Kd 440
+  //#define DEFAULT_Kp 63.0
+  //#define DEFAULT_Ki 2.25
+  //#define DEFAULT_Kd 440
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 //#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -399,30 +424,35 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define  DEFAULT_bedKp 10.00
-  #define  DEFAULT_bedKi .023
-  #define  DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 800
 
@@ -477,11 +507,10 @@
 #define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -492,18 +521,58 @@
 #endif
 
 // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
-#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define X_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -566,11 +635,21 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-#define DEFAULT_XJERK                 20.0
-#define DEFAULT_YJERK                 20.0
-#define DEFAULT_ZJERK                  0.4
+#define DEFAULT_XJERK                 10.0
+#define DEFAULT_YJERK                 10.0
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -621,6 +700,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -631,7 +711,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -650,6 +730,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -687,13 +770,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -717,6 +803,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -752,9 +842,6 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -768,6 +855,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -800,7 +889,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -808,7 +897,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -816,18 +905,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -875,6 +969,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -897,12 +997,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -914,13 +1014,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -943,17 +1040,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -962,27 +1048,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -991,8 +1073,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -1004,6 +1099,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1154,7 +1254,7 @@
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1169,6 +1269,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1275,11 +1377,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1307,19 +1409,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1346,19 +1435,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1410,12 +1508,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1433,40 +1537,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1475,28 +1545,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1504,33 +1552,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1546,12 +1589,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1576,6 +1620,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1591,24 +1712,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1624,6 +1737,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1633,11 +1753,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1697,7 +1846,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/Anet/A6/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Anet/A8/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 //#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -233,6 +238,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -246,6 +260,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -254,7 +269,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -264,6 +280,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -285,7 +302,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 5
 #define TEMP_SENSOR_1 0
@@ -293,6 +310,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 5
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -342,7 +360,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -356,48 +374,55 @@
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
   // Ultimaker
-  //#define  DEFAULT_Kp 21.0
-  //#define  DEFAULT_Ki 1.25
-  //#define  DEFAULT_Kd 86.0
+  //#define DEFAULT_Kp 21.0
+  //#define DEFAULT_Ki 1.25
+  //#define DEFAULT_Kd 86.0
 
   // MakerGear
-  //#define  DEFAULT_Kp 7.0
-  //#define  DEFAULT_Ki 0.1
-  //#define  DEFAULT_Kd 12
+  //#define DEFAULT_Kp 7.0
+  //#define DEFAULT_Ki 0.1
+  //#define DEFAULT_Kd 12
 
   // Mendel Parts V9 on 12V
-  //#define  DEFAULT_Kp 63.0
-  //#define  DEFAULT_Ki 2.25
-  //#define  DEFAULT_Kd 440
+  //#define DEFAULT_Kp 63.0
+  //#define DEFAULT_Ki 2.25
+  //#define DEFAULT_Kd 440
 
   // ANET A8 Standard Extruder at 210 Degree Celsius and 100% Fan
   //(measured after M106 S255 with M303 E0 S210 C8)
-  #define  DEFAULT_Kp 21.0
-  #define  DEFAULT_Ki 1.25
-  #define  DEFAULT_Kd 86.0
+  #define DEFAULT_Kp 21.0
+  #define DEFAULT_Ki 1.25
+  #define DEFAULT_Kd 86.0
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 //#define PIDTEMPBED
 
 #define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -406,30 +431,35 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define  DEFAULT_bedKp 10.00
-  #define  DEFAULT_bedKi .023
-  #define  DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 160  // 160 guards against false tripping when the extruder fan kicks on.
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 200
 
@@ -484,11 +514,10 @@
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -507,10 +536,50 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 #define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -573,11 +642,21 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-#define DEFAULT_XJERK                 20.0
-#define DEFAULT_YJERK                 20.0
+#define DEFAULT_XJERK                 10.0
+#define DEFAULT_YJERK                 10.0
 #define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -628,6 +707,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -638,7 +718,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -657,6 +737,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -694,13 +777,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 0   // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 6000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -724,6 +810,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -759,9 +849,6 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -775,6 +862,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -807,7 +896,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -815,7 +904,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -823,18 +912,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -882,6 +976,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -904,12 +1004,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -921,13 +1021,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 190
-  #define FRONT_PROBE_BED_POSITION 15
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -950,17 +1047,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 20
-  #define ABL_PROBE_PT_1_Y 160
-  #define ABL_PROBE_PT_2_X 20
-  #define ABL_PROBE_PT_2_Y 10
-  #define ABL_PROBE_PT_3_X 180
-  #define ABL_PROBE_PT_3_Y 10
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -969,27 +1055,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -998,8 +1080,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  #define PROBE_PT_1_X 20
+  #define PROBE_PT_1_Y 160
+  #define PROBE_PT_2_X 20
+  #define PROBE_PT_2_Y 10
+  #define PROBE_PT_3_X 180
+  #define PROBE_PT_3_Y 10
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -1011,6 +1106,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1161,7 +1261,7 @@
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1176,6 +1276,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1282,11 +1384,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1314,19 +1416,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1353,19 +1442,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1417,12 +1515,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1440,40 +1544,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-//#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1482,30 +1552,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1513,33 +1559,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 #define ZONESTAR_LCD              // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1555,12 +1596,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1585,6 +1627,85 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1600,24 +1721,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1633,6 +1746,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1642,11 +1762,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1706,7 +1855,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/Anet/A8/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/Hephestos/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 //#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -126,9 +131,6 @@
 // Displayed in the LCD "Ready" message
 #define CUSTOM_MACHINE_NAME "HEPHESTOS"
 
-// Added for BQ
-#define SOURCE_CODE_URL "http://www.bq.com/gb/downloads-prusa-i3-hephestos.html"
-
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
@@ -235,6 +237,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -248,6 +259,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -256,7 +268,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -266,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -287,7 +301,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
@@ -295,6 +309,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 0
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -344,7 +359,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -356,32 +371,39 @@
                                   // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
 
   // Hephestos i3
-  #define  DEFAULT_Kp 23.05
-  #define  DEFAULT_Ki 2.00
-  #define  DEFAULT_Kd 66.47
+  #define DEFAULT_Kp 23.05
+  #define DEFAULT_Ki 2.00
+  #define DEFAULT_Kd 66.47
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 //#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -390,30 +412,35 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define  DEFAULT_bedKp 10.00
-  #define  DEFAULT_bedKi .023
-  #define  DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 200
 
@@ -468,11 +495,10 @@
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -491,10 +517,50 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -559,9 +625,19 @@
  */
 #define DEFAULT_XJERK                 10.0
 #define DEFAULT_YJERK                 10.0
-#define DEFAULT_ZJERK                  0.4
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -612,6 +688,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -622,7 +699,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -641,6 +718,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -678,13 +758,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -708,6 +791,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   15 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -743,9 +830,6 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -759,6 +843,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -791,7 +877,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -799,7 +885,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -807,18 +893,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -866,6 +957,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -888,12 +985,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -905,13 +1002,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -934,17 +1028,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -953,27 +1036,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -982,8 +1061,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -995,6 +1087,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1145,7 +1242,7 @@
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1160,6 +1257,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1266,11 +1365,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1298,19 +1397,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1337,19 +1423,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1401,12 +1496,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1424,40 +1525,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1466,28 +1533,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1495,33 +1540,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1537,12 +1577,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1567,6 +1608,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1582,24 +1700,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1615,6 +1725,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1624,11 +1741,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1688,7 +1834,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -161,20 +172,22 @@
 // Extruder runout prevention.
 // If the machine is idle and the temperature over MINTEMP
 // then extrude some filament every couple of SECONDS.
-#define EXTRUDER_RUNOUT_PREVENT
+//#define EXTRUDER_RUNOUT_PREVENT
 #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
-  #define EXTRUDER_RUNOUT_MINTEMP 170
-  #define EXTRUDER_RUNOUT_SECONDS 60
+  #define EXTRUDER_RUNOUT_MINTEMP 190
+  #define EXTRUDER_RUNOUT_SECONDS 30
   #define EXTRUDER_RUNOUT_SPEED 1500  // mm/m
   #define EXTRUDER_RUNOUT_EXTRUDE 5   // mm
 #endif
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -193,12 +206,22 @@
 // When first starting the main fan, run it at full speed for the
 // given number of milliseconds.  This gets the fan spinning reliably
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+#define FAN_KICKSTART_TIME 800
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -351,13 +379,16 @@
 // Homing hits each endstop, retracts by these distances, then does a slower bump.
 #define X_HOME_BUMP_MM 5
 #define Y_HOME_BUMP_MM 5
-#define Z_HOME_BUMP_MM 2
+#define Z_HOME_BUMP_MM 1
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 #define QUICK_HOME                       // If homing includes X and Y, do a diagonal move initially
 
 // When G28 is called, this option will make Y home before X
 #define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -374,10 +405,10 @@
 // Default stepper release if idle. Set to 0 to deactivate.
 // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
 // Time can be set by M18 and M84.
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X true
-#define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // set to false if the nozzle will fall down on your printed part when print has finished.
+#define DEFAULT_STEPPER_DEACTIVE_TIME 300
+#define DISABLE_INACTIVE_X false
+#define DISABLE_INACTIVE_Y false
+#define DISABLE_INACTIVE_Z false  // set to false if the nozzle will fall down on your printed part when print has finished.
 #define DISABLE_INACTIVE_E true
 
 #define DEFAULT_MINIMUMFEEDRATE       0.0     // minimum feedrate
@@ -388,7 +419,7 @@
 // @section lcd
 
 #if ENABLED(ULTIPANEL)
-  #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+  #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel
   //#define ULTIPANEL_FEEDMULTIPLY  // Comment to disable setting feedrate multiplier via encoder
 #endif
 
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -434,7 +481,15 @@
  *    M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  */
 //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 }            // Values in milliamps
-#define DIGIPOT_MOTOR_CURRENT { 150, 170, 180, 190, 180 }   // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A])
+
+#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 }   // Values 0-255
+                                                            //
+                                                            // bq ZUM Mega 3D defaults:
+                                                            //  X  = 150 [~1.17A]
+                                                            //  Y  = 170 [~1.33A]
+                                                            //  Z  = 180 [~1.41A]
+                                                            //  E0 = 190 [~1.49A]
+
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 }      // Default drive percent - X, Y, Z, E axis
 
 // Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
@@ -454,24 +509,25 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
 //=============================Additional Features===========================
 //===========================================================================
 
-//#define ENCODER_RATE_MULTIPLIER         // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
-//#define ENCODER_10X_STEPS_PER_SEC 75    // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
-//#define ENCODER_100X_STEPS_PER_SEC 160  // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
+#define ENCODER_RATE_MULTIPLIER       // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly
+#define ENCODER_10X_STEPS_PER_SEC  30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value
+#define ENCODER_100X_STEPS_PER_SEC 50 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value
 
 //#define CHDK 4        //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
-//#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
+#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again
 
 // @section lcd
 
 // Include a page of printer information in the LCD Main Menu
-#define LCD_INFO_MENU
+//#define LCD_INFO_MENU
 
 // Scroll a longer status message into view
 #define STATUS_MESSAGE_SCROLLING
@@ -480,7 +536,21 @@
 #define LCD_DECIMAL_SMALL_XY
 
 // The timeout (in ms) to return to the status screen from sub-menus
-//#define LCD_TIMEOUT_TO_STATUS 15000
+#define LCD_TIMEOUT_TO_STATUS 60000
+
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
 
 /**
  * LED Control Menu
@@ -508,8 +578,8 @@
   // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
   #define SD_DETECT_INVERTED
 
-  #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
-  #define SD_FINISHED_RELEASECOMMAND "M104 S0\nM84 X Y Z E" // You might want to keep the z enabled so your bed stays in place.
+  #define SD_FINISHED_STEPPERRELEASE false         // Disable steppers when SD Print is finished
+  #define SD_FINISHED_RELEASECOMMAND "G27 P0"      // You might want to keep the z enabled so your bed stays in place.
 
   // Reverse SD sort to show "more recent" files first, according to the card's FAT.
   // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
@@ -518,6 +588,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,27 +640,8 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
-  #define LONG_FILENAME_HOST_SUPPORT
+  //#define LONG_FILENAME_HOST_SUPPORT
 
   // Enable this option to scroll long filenames in the SD card menu
   //#define SCROLL_LONG_FILENAMES
@@ -595,6 +660,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,19 +680,22 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
-  #define XYZ_HOLLOW_FRAME
+  //#define XYZ_HOLLOW_FRAME
 
   // Enable to save many cycles by drawing a hollow frame on Menu Screens
   #define MENU_HOLLOW_FRAME
 
   // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
-  #define USE_BIG_EDIT_FONT
+  //#define USE_BIG_EDIT_FONT
 
   // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
   // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
-  #define USE_SMALL_INFOFONT
+  //#define USE_SMALL_INFOFONT
 
   // Enable this option and reduce the value to optimize screen updates.
   // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
@@ -631,6 +704,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -655,68 +747,44 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
-  //#define BABYSTEP_XY              // Also enable X/Y Babystepping. Not supported on DELTA!
-  #define BABYSTEP_INVERT_Z false    // Change if Z babysteps should go the other way
-  #define BABYSTEP_MULTIPLICATOR 1   // Babysteps are very small. Increase for faster motion.
-  //#define BABYSTEP_ZPROBE_OFFSET   // Enable to combine M851 and Babystepping
-  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
-  #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
-                                        // Note: Extra time may be added to mitigate controller latency.
-  //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
+  //#define BABYSTEP_XY                   // Also enable X/Y Babystepping. Not supported on DELTA!
+  #define BABYSTEP_INVERT_Z false         // Change if Z babysteps should go the other way
+  #define BABYSTEP_MULTIPLICATOR 2        // Babysteps are very small. Increase for faster motion.
+  //#define BABYSTEP_ZPROBE_OFFSET          // Enable to combine M851 and Babystepping
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
+  #define DOUBLECLICK_MAX_INTERVAL  1500  // Maximum interval between clicks, in milliseconds.
+                                          // Note: Extra time may be added to mitigate controller latency.
+  //#define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
 #endif
 
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -730,7 +798,7 @@
 //
 // G2/G3 Arc Support
 //
-#define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
+//#define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
   #define MM_PER_ARC_SEGMENT  1   // Length of each arc segment
   #define N_ARC_CORRECTION   25   // Number of intertpolated segments between corrections
@@ -751,9 +819,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -769,7 +868,7 @@
 // The number of linear motions that can be in the plan at any give time.
 // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
 #if ENABLED(SDSUPPORT)
-  #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
 #else
   #define BLOCK_BUFFER_SIZE 64 // maximize block buffer
 #endif
@@ -815,13 +914,13 @@
 // enter the serial receive buffer, so they cannot be blocked.
 // Currently handles M108, M112, M410
 // Does not work on boards using AT90USB (USBCON) processors!
-#define EMERGENCY_PARSER
+//#define EMERGENCY_PARSER
 
 // Bad Serial-connections can miss a received command by sending an 'ok'
 // Therefore some clients abort after 30 seconds in a timeout.
 // Some other clients start sending commands while receiving a 'wait'.
 // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
-//#define NO_TIMEOUTS 1000 // Milliseconds
+#define NO_TIMEOUTS 1000 // Milliseconds
 
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
 #define ADVANCED_OK
@@ -873,62 +972,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1073,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1132,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1190,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1213,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1241,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1510,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1551,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1563,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1595,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1605,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1645,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/BQ/Hephestos_2/README.md

@@ -1,22 +1,29 @@
 # Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
-This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin).
+Based on the original configuration file shipped with the heavily modified Marlin fork by BQ.
+The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin).
 
-NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.
+NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware.
 
 ## Changelog
- * 2016/03/01 - Initial release
+ * 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af).
+                ABL Bilinear 5x5 is active by default.
 
- * 2016/03/21 - Activated 4-point auto leveling by default
-                Updated miscellaneous z-probe values
+ * 2017/07/06 - Configuration updated to the latest Marlin version and added support for the
+                official BQ heated bed upgrade kit.
 
- * 2016/06/21 - Disabled hot bed related options
-                Activated software endstops
-                SD printing now disables the heater when finished
+ * 2016/12/13 - Configuration updated to the latest Marlin version.
 
- * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis
-                Increased the `DEFAULT_XYJERK`
+ * 2016/07/13 - Configuration updated to the latest Marlin version.
 
- * 2016/12/13 - Configuration updated.
+ * 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now
+               disables the heater when finishes printing.
 
- * 2017/07/06 - Configuration updated to the latest Marlin version.
-                Added support for the official BQ heated bed kit.
+ * 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values.
+
+ * 2016/03/01 - The first release of Marlin's configuration file for the
+                BQ Hephestos 2 3D printer.
+
+
+## Support
+This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any
+issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail.

Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h

@@ -21,83 +21,80 @@
  */
 
 /**
- * Custom Bitmap for splashscreen
+ * Custom Boot Screen bitmap
  *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
  *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
  */
-#include <avr/pgmspace.h>
 
-#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  62
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  64
 
-const unsigned char custom_start_bmp[512] PROGMEM = {
-  0x00, 0x00, 0x00, 0x0F, 0xF0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x03, 0xC0, 0x0F, 0xF0, 0x07, 0x80, 0x00,
-  0x00, 0x07, 0xE0, 0x07, 0xE0, 0x0F, 0xC0, 0x00,
-  0x00, 0x0F, 0xF0, 0x03, 0xC0, 0x1F, 0xE0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x0F, 0xF0, 0x00, 0x00, 0x1F, 0xE0, 0x00,
-  0x00, 0x07, 0xE0, 0x00, 0x00, 0x0F, 0xC0, 0x00,
-  0x00, 0x03, 0xC0, 0x00, 0x00, 0x07, 0x80, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x1E, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0x3F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0x7F, 0x80, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF7, 0xC0, 0x1F, 0x80,
-  0xFF, 0xC0, 0x00, 0x00, 0xFF, 0xF0, 0x7F, 0xC0,
-  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xF8, 0xFF, 0xE0,
-  0x3F, 0x00, 0x00, 0x00, 0xFC, 0xF8, 0xF0, 0xF8,
-  0x1E, 0x00, 0x00, 0x00, 0xF8, 0x7D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF8, 0x79, 0xF0, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0xFF, 0xF8, 0xFF, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x7F, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x0F, 0xE0, 0x3F, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x03, 0x80, 0x0E, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000,
+  B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000,
+  B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000,
+  B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
+  B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
+  B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
+  B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000,
+  B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,
+  B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000,
+  B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
+  B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
+  B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
+  B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
+  B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000,
+  B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000,
+  B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000,
+  B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
 };

Marlin/example_configurations/BQ/WITBOX/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 //#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -126,9 +131,6 @@
 // Displayed in the LCD "Ready" message
 #define CUSTOM_MACHINE_NAME "WITBOX"
 
-// Added for BQ
-#define SOURCE_CODE_URL "http://www.bq.com/gb/downloads-witbox.html"
-
 // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
 // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
 //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
@@ -235,6 +237,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -248,6 +259,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -256,7 +268,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -266,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -287,7 +301,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
@@ -295,6 +309,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 0
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -344,7 +359,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -356,32 +371,39 @@
                                   // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
 
   // Witbox
-  #define  DEFAULT_Kp 22.2
-  #define  DEFAULT_Ki 1.08
-  #define  DEFAULT_Kd 114
+  #define DEFAULT_Kp 22.2
+  #define DEFAULT_Ki 1.08
+  #define DEFAULT_Kd 114
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 //#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -390,30 +412,35 @@
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  #define  DEFAULT_bedKp 10.00
-  #define  DEFAULT_bedKi .023
-  #define  DEFAULT_bedKd 305.4
+  #define DEFAULT_bedKp 10.00
+  #define DEFAULT_bedKi .023
+  #define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 200
 
@@ -468,11 +495,10 @@
 #define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -491,10 +517,50 @@
 #define Z_MAX_ENDSTOP_INVERTING true  // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -559,9 +625,19 @@
  */
 #define DEFAULT_XJERK                 10.0
 #define DEFAULT_YJERK                 10.0
-#define DEFAULT_ZJERK                  0.4
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -612,6 +688,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -622,7 +699,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -641,6 +718,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -678,13 +758,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER -29     // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER -12.35  // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -708,6 +791,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   15 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -743,9 +830,6 @@
 #define INVERT_Y_DIR false
 #define INVERT_Z_DIR true
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -759,6 +843,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -791,7 +877,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -799,7 +885,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -807,18 +893,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -866,6 +957,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -888,12 +985,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -905,13 +1002,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -934,17 +1028,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -953,27 +1036,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -982,8 +1061,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -995,6 +1087,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1145,7 +1242,7 @@
 #define PREHEAT_2_FAN_SPEED   255 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1160,6 +1257,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1266,11 +1365,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1298,19 +1397,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1337,19 +1423,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-//#define ENCODER_PULSES_PER_STEP 1
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-//#define ENCODER_STEPS_PER_MENU_ITEM 5
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1401,12 +1496,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1424,40 +1525,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1466,28 +1533,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1495,33 +1540,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1537,12 +1577,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1567,6 +1608,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1582,24 +1700,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1615,6 +1725,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1624,11 +1741,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1688,7 +1834,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 3                  // X position of hotend
-  #define PAUSE_PARK_Y_POS 3                  // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 2         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 100   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Cartesio/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 #define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -233,6 +238,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -246,6 +260,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -254,7 +269,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -264,6 +280,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -285,7 +302,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 -1
 #define TEMP_SENSOR_1 -1
@@ -293,6 +310,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -342,7 +360,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -356,42 +374,49 @@
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
     // Cartesio extruderV6 40W Normal
-    #define  DEFAULT_Kp 18
-    #define  DEFAULT_Ki 1
-    #define  DEFAULT_Kd 100
+    #define DEFAULT_Kp 18
+    #define DEFAULT_Ki 1
+    #define DEFAULT_Kd 100
 
     // Cartesio extruderV6 40W Volcano
-    //#define  DEFAULT_Kp 50
-    //#define  DEFAULT_Ki 9
-    //#define  DEFAULT_Kd 70
+    //#define DEFAULT_Kp 50
+    //#define DEFAULT_Ki 9
+    //#define DEFAULT_Kd 70
 
     // Cartesio extruderV6 40W Cyclops
-    //#define  DEFAULT_Kp 18
-    //#define  DEFAULT_Ki 1
-    //#define  DEFAULT_Kd 100
+    //#define DEFAULT_Kp 18
+    //#define DEFAULT_Ki 1
+    //#define DEFAULT_Kd 100
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 #define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -399,29 +424,34 @@
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
     //24V 500W silicone heater on to 4mm glass CartesioW
-    #define  DEFAULT_bedKp 390
-    #define  DEFAULT_bedKi 70
-    #define  DEFAULT_bedKd 546
+    #define DEFAULT_bedKp 390
+    #define DEFAULT_bedKi 70
+    #define DEFAULT_bedKd 546
 
     //24V 250W silicone heater on to 4mm glass CartesioM
-    //#define  DEFAULT_bedKp 303
-    //#define  DEFAULT_bedKi 42
-    //#define  DEFAULT_bedKd 539
+    //#define DEFAULT_bedKp 303
+    //#define DEFAULT_bedKi 42
+    //#define DEFAULT_bedKd 539
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 200
 
@@ -476,11 +506,10 @@
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -497,12 +526,52 @@
 #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true  // set to true to invert the logic of the probe.
+
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
 
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -567,9 +636,19 @@
  */
 #define DEFAULT_XJERK                 10.0
 #define DEFAULT_YJERK                 10.0
-#define DEFAULT_ZJERK                  0.4
+#define DEFAULT_ZJERK                  0.3
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -620,6 +699,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -630,7 +710,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -649,6 +729,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -686,13 +769,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -716,6 +802,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   15 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING           5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -751,9 +841,6 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -767,6 +854,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 4  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -799,7 +888,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -807,7 +896,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -815,18 +904,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -874,6 +968,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -896,12 +996,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -913,13 +1013,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -942,17 +1039,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -961,27 +1047,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -990,8 +1072,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -1003,6 +1098,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 //#define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1153,7 +1253,7 @@
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1168,6 +1268,8 @@
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1274,11 +1376,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1306,19 +1408,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1345,6 +1434,15 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
@@ -1409,12 +1507,18 @@
 #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
 #define LCD_FEEDBACK_FREQUENCY_HZ 1000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1432,40 +1536,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-//#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1474,28 +1544,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-#define REPRAPWORLD_KEYPAD
-#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1503,33 +1551,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1545,12 +1588,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1575,6 +1619,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1590,24 +1711,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1623,6 +1736,13 @@
 //
 //#define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1632,11 +1752,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+#define REPRAPWORLD_KEYPAD
+#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1696,7 +1845,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/Cartesio/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
 #define TEMP_SENSOR_AD595_OFFSET 3.0
 #define TEMP_SENSOR_AD595_GAIN   2.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 35
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 #define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 //#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS 30                 // X position of hotend
-  #define PAUSE_PARK_Y_POS 10                 // Y position of hotend
-  #define PAUSE_PARK_Z_ADD 10                 // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 1         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  //#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 6     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 45        // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 5 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  //#define PARK_HEAD_ON_PAUSE                // Go to filament change position on pause, return to print position on resume
-  //#define HOME_BEFORE_FILAMENT_CHANGE       // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            1  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  //#define FILAMENT_CHANGE_UNLOAD_LENGTH    100  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define HOME_BEFORE_FILAMENT_CHANGE           // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1445,6 +1502,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1478,7 +1543,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1490,7 +1555,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1522,7 +1587,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1532,27 +1597,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1570,4 +1637,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Cartesio/_Bootscreen.h

@@ -21,83 +21,80 @@
  */
 
 /**
- * Custom Bitmap for splashscreen
+ * Custom Boot Screen bitmap
  *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
  *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
  */
-#include <avr/pgmspace.h>
 
-#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  63
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  64
 
-const unsigned char custom_start_bmp[512] PROGMEM = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3F, 0xFC, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x03, 0xFF, 0xFF, 0xC0, 0x00, 0x00,
-  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xF0, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
-  0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0x00,
-  0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x0F, 0x07, 0x87, 0xFF, 0xFF, 0xE0, 0x00,
-  0x00, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x00,
-  0x01, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x80,
-  0x03, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x80,
-  0x07, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xC0,
-  0x07, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xE0,
-  0x0F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xE0,
-  0x0F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xF0,
-  0x1F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xF0,
-  0x1F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xF0,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xF8,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x3F, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x1F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF0,
-  0x1F, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF0,
-  0x1F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xE0,
-  0x0F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xE0,
-  0x0F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xC0,
-  0x07, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xC0,
-  0x03, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0x80,
-  0x03, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0x00,
-  0x01, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF0, 0x00,
-  0x00, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF0, 0x00,
-  0x00, 0x0F, 0xFF, 0xFF, 0xC3, 0xC1, 0xE0, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
-  0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0x00,
-  0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xF0, 0x00, 0x00,
-  0x00, 0x00, 0x07, 0xFF, 0xFF, 0x80, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x7F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,
+  B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
+  B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
+  B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,
+  B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
+  B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00001111,B00000111,B10000111,B11111111,B11111111,B11100000,B00000000,
+  B00000000,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B00000000,
+  B00000001,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
+  B00000011,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
+  B00000111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11000000,
+  B00000111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
+  B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
+  B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
+  B00011111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
+  B00011111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11110000,
+  B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
+  B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
+  B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
+  B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11111000,
+  B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
+  B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
+  B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
+  B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
+  B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
+  B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
+  B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
+  B00111111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
+  B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
+  B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
+  B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
+  B00011111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
+  B00011111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
+  B00011111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
+  B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
+  B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11000000,
+  B00000111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11000000,
+  B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B10000000,
+  B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B00000000,
+  B00000001,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
+  B00000000,B00001111,B11111111,B11111111,B11000011,B11000001,B11100000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
+  B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
+  B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
+  B00000000,B00000001,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,
+  B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
+  B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
+  B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
 };

Marlin/example_configurations/Creality/CR-10/Configuration.h

@@ -37,7 +37,7 @@
  */
 #ifndef CONFIGURATION_H
 #define CONFIGURATION_H
-#define CONFIGURATION_H_VERSION 010107
+#define CONFIGURATION_H_VERSION 010109
 
 //===========================================================================
 //============================= Getting Started =============================
@@ -79,22 +79,27 @@
 #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
 #define STRING_SPLASH_LINE2 WEBSITE_URL         // will be shown during bootup in line 2
 
-//
-// *** VENDORS PLEASE READ *****************************************************
-//
-// Marlin now allow you to have a vendor boot image to be displayed on machine
-// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your
-// custom boot image and then the default Marlin boot image is shown.
-//
-// We suggest for you to take advantage of this new feature and keep the Marlin
-// boot image unmodified. For an example have a look at the bq Hephestos 2
-// example configuration folder.
-//
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
 #define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
- * Select which serial port on the board will be used for communication with the host.
+ * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
  * Serial port 0 is always used by the Arduino bootloader regardless of this setting.
  *
@@ -232,6 +237,15 @@
   // Enable this option to leave the PSU off at startup.
   // Power to steppers and heaters will need to be turned on with M80.
   //#define PS_DEFAULT_OFF
+
+  //#define AUTO_POWER_CONTROL        // Enable automatic control of the PS_ON pin
+  #if ENABLED(AUTO_POWER_CONTROL)
+    #define AUTO_POWER_FANS           // Turn on PSU if fans need power
+    #define AUTO_POWER_E_FANS
+    #define AUTO_POWER_CONTROLLERFAN
+    #define POWER_TIMEOUT 30
+  #endif
+
 #endif
 
 // @section temperature
@@ -245,6 +259,7 @@
  *
  * Temperature sensors available:
  *
+ *    -4 : thermocouple with AD8495
  *    -3 : thermocouple with MAX31855 (only for sensor 0)
  *    -2 : thermocouple with MAX6675 (only for sensor 0)
  *    -1 : thermocouple with AD595
@@ -253,7 +268,8 @@
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
- *     5 : 100K thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (4.7k pullup)
+ *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ *   501 : 100K Zonestar (Tronxy X3A) Thermistor
  *     6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
  *     7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
  *    71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
@@ -263,6 +279,7 @@
  *    11 : 100k beta 3950 1% thermistor (4.7k pullup)
  *    12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
  *    13 : 100k Hisens 3950  1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ *    15 : 100k thermistor calibration for JGAurora A5 hotend
  *    20 : the PT100 circuit found in the Ultimainboard V2.x
  *    60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
  *    66 : 4.7M High Temperature thermistor from Dyze Design
@@ -284,7 +301,7 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  *
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950  1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
  */
 #define TEMP_SENSOR_0 1
 #define TEMP_SENSOR_1 0
@@ -292,6 +309,7 @@
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_BED 5
+#define TEMP_SENSOR_CHAMBER 0
 
 // Dummy thermistor constant temperature readings, for use with 998 and 999
 #define DUMMY_THERMISTOR_998_VALUE 25
@@ -341,7 +359,7 @@
 #define PIDTEMP
 #define BANG_MAX 255     // Limits current to nozzle while in bang-bang mode; 255=full current
 #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
-#define PID_K1 0.95      // Smoothing factor within the PID
+#define PID_K1 0.95      // Smoothing factor within any PID loop
 #if ENABLED(PIDTEMP)
   //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
   //#define PID_DEBUG // Sends debug data to the serial port.
@@ -355,47 +373,54 @@
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
   // Stock CR-10 tuned for 70C
-  #define  DEFAULT_Kp 22.57
-  #define  DEFAULT_Ki 1.72
-  #define  DEFAULT_Kd 73.96
+  #define DEFAULT_Kp 22.57
+  #define DEFAULT_Ki 1.72
+  #define DEFAULT_Kd 73.96
 
   // Ultimaker
-  //#define  DEFAULT_Kp 22.2
-  //#define  DEFAULT_Ki 1.08
-  //#define  DEFAULT_Kd 114
+  //#define DEFAULT_Kp 22.2
+  //#define DEFAULT_Ki 1.08
+  //#define DEFAULT_Kd 114
 
   // MakerGear
-  //#define  DEFAULT_Kp 7.0
-  //#define  DEFAULT_Ki 0.1
-  //#define  DEFAULT_Kd 12
+  //#define DEFAULT_Kp 7.0
+  //#define DEFAULT_Ki 0.1
+  //#define DEFAULT_Kd 12
 
   // Mendel Parts V9 on 12V
-  //#define  DEFAULT_Kp 63.0
-  //#define  DEFAULT_Ki 2.25
-  //#define  DEFAULT_Kd 440
+  //#define DEFAULT_Kp 63.0
+  //#define DEFAULT_Ki 2.25
+  //#define DEFAULT_Kd 440
 
 #endif // PIDTEMP
 
 //===========================================================================
 //============================= PID > Bed Temperature Control ===============
 //===========================================================================
-// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
-//
-// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
-// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
-// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
-// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
-// If your configuration is significantly different than this and you don't understand the issues involved, you probably
-// shouldn't use bed PID until someone else verifies your hardware works.
-// If this is enabled, find your own PID constants below.
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
 #define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
-// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
-// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
-// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
-// so you shouldn't use it unless you are OK with PWM on your bed.  (see the comment on enabling PIDTEMPBED)
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
 #define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 
 #if ENABLED(PIDTEMPBED)
@@ -403,36 +428,41 @@
   //#define PID_BED_DEBUG // Sends debug data to the serial port.
 
   //Stock CR-10 Bed Tuned for 70C
-  #define  DEFAULT_bedKp 426.68
-  #define  DEFAULT_bedKi 78.92
-  #define  DEFAULT_bedKd 576.71
+  #define DEFAULT_bedKp 426.68
+  #define DEFAULT_bedKi 78.92
+  #define DEFAULT_bedKd 576.71
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
-  //#define  DEFAULT_bedKp 10.00
-  //#define  DEFAULT_bedKi .023
-  //#define  DEFAULT_bedKd 305.4
+  //#define DEFAULT_bedKp 10.00
+  //#define DEFAULT_bedKi .023
+  //#define DEFAULT_bedKd 305.4
 
   //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   //from pidautotune
-  //#define  DEFAULT_bedKp 97.1
-  //#define  DEFAULT_bedKi 1.41
-  //#define  DEFAULT_bedKd 1675.16
+  //#define DEFAULT_bedKp 97.1
+  //#define DEFAULT_bedKi 1.41
+  //#define DEFAULT_bedKd 1675.16
 
   // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
 #endif // PIDTEMPBED
 
 // @section extruder
 
-// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP.
-// It also enables the M302 command to set the minimum extrusion temperature
-// or to allow moving the extruder regardless of the hotend temperature.
-// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
 #define PREVENT_COLD_EXTRUSION
 #define EXTRUDE_MINTEMP 170
 
-// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH.
-// Note that for Bowden Extruders a too-small value here may prevent loading.
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
 #define PREVENT_LENGTHY_EXTRUDE
 #define EXTRUDE_MAXLENGTH 1000
 
@@ -487,11 +517,10 @@
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
-// coarse Endstop Settings
-//#define ENDSTOPPULLUPS // Comment this out (using // at the start of the line) to disable the endstop pullup resistors
-
+// Enable pullup for all endstops to prevent a floating state
+//#define ENDSTOPPULLUPS
 #if DISABLED(ENDSTOPPULLUPS)
-  // fine endstop settings: Individual pullups. will be ignored if ENDSTOPPULLUPS is defined
+  // Disable ENDSTOPPULLUPS to set pullups individually
   //#define ENDSTOPPULLUP_XMAX
   //#define ENDSTOPPULLUP_YMAX
   //#define ENDSTOPPULLUP_ZMAX
@@ -510,10 +539,50 @@
 #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
 #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
 
+/**
+ * Specify Stepper Driver types
+ * The options are used to determine driver pulse timings as well as more advanced functionality.
+ * Stepper timing options can be overridden in Configuration_adv.h
+ *
+ * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ *          TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
+#define X2_DRIVER_TYPE A4988
+#define Y2_DRIVER_TYPE A4988
+#define Z2_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE A4988
+#define E1_DRIVER_TYPE A4988
+#define E2_DRIVER_TYPE A4988
+#define E3_DRIVER_TYPE A4988
+#define E4_DRIVER_TYPE A4988
+
 // Enable this feature if all enabled endstop pins are interrupt-capable.
 // This will remove the need to poll the interrupt pins, saving many CPU cycles.
 //#define ENDSTOP_INTERRUPTS_FEATURE
 
+/**
+ * Endstop Noise Filter
+ *
+ * Enable this option if endstops falsely trigger due to noise.
+ * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing
+ * will end up at a slightly different position on each G28. This will also
+ * reduce accuracy of some bed probes.
+ * For mechanical switches, the better approach to reduce noise is to install
+ * a 100 nanofarads ceramic capacitor in parallel with the switch, making it
+ * essentially noise-proof without sacrificing accuracy.
+ * This option also increases MCU load when endstops or the probe are enabled.
+ * So this is not recommended. USE AT YOUR OWN RISK.
+ * (This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, since they already include the 100nF capacitor.)
+ */
+//#define ENDSTOP_NOISE_FILTER
+
 //=============================================================================
 //============================== Movement Settings ============================
 //=============================================================================
@@ -576,11 +645,21 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-#define DEFAULT_XJERK                 20.0
-#define DEFAULT_YJERK                 20.0
+#define DEFAULT_XJERK                 10.0
+#define DEFAULT_YJERK                 10.0
 #define DEFAULT_ZJERK                  2.7
 #define DEFAULT_EJERK                  5.0
 
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
 //===========================================================================
 //============================= Z Probe Options =============================
 //===========================================================================
@@ -631,6 +710,7 @@
  * or (with LCD_BED_LEVELING) the LCD controller.
  */
 //#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
 
 /**
  * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
@@ -641,7 +721,7 @@
 /**
  * Z Servo Probe, such as an endstop switch on a rotating arm.
  */
-//#define Z_ENDSTOP_SERVO_NR 0   // Defaults to SERVO 0 connector.
+//#define Z_PROBE_SERVO_NR 0   // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES {70,0}  // Z Servo Deploy and Stow angles
 
 /**
@@ -660,6 +740,9 @@
  * readings with inductive probes and piezo sensors.
  */
 //#define PROBING_HEATERS_OFF       // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+  //#define WAIT_FOR_BED_HEATER     // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
 //#define PROBING_FANS_OFF          // Turn fans off when probing
 //#define DELAY_BEFORE_PROBING 200  // (ms) To prevent vibrations from triggering piezo sensors
 
@@ -697,13 +780,16 @@
 #define Y_PROBE_OFFSET_FROM_EXTRUDER 10  // Y offset: -front +behind [the nozzle]
 #define Z_PROBE_OFFSET_FROM_EXTRUDER 0   // Z offset: -below +above  [the nozzle]
 
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000
 
-// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
 
-// Speed for the "accurate" probe of each point
+// Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
 
 // The number of probes to perform at each point.
@@ -727,6 +813,10 @@
  */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING          10 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -20
@@ -762,9 +852,6 @@
 #define INVERT_Y_DIR true
 #define INVERT_Z_DIR false
 
-// Enable this option for Toshiba stepper drivers
-//#define CONFIG_STEPPERS_TOSHIBA
-
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
@@ -778,6 +865,8 @@
 
 //#define NO_MOTION_BEFORE_HOMING  // Inhibit movement until all axes have been homed
 
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
 //#define Z_HOMING_HEIGHT 5  // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
                              // Be sure you have this distance over your Z_MAX_POS in case.
 
@@ -810,7 +899,7 @@
  * - Use 'M211' to set software endstops on/off or report current state
  */
 
-// Min software endstops curtail movement below minimum coordinate bounds
+// Min software endstops constrain movement within minimum coordinate bounds
 #define MIN_SOFTWARE_ENDSTOPS
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
   #define MIN_SOFTWARE_ENDSTOP_X
@@ -818,7 +907,7 @@
   #define MIN_SOFTWARE_ENDSTOP_Z
 #endif
 
-// Max software endstops curtail movement above maximum coordinate bounds
+// Max software endstops constrain movement within maximum coordinate bounds
 #define MAX_SOFTWARE_ENDSTOPS
 #if ENABLED(MAX_SOFTWARE_ENDSTOPS)
   #define MAX_SOFTWARE_ENDSTOP_X
@@ -826,18 +915,23 @@
   #define MAX_SOFTWARE_ENDSTOP_Z
 #endif
 
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+#endif
+
 /**
- * Filament Runout Sensor
- * A mechanical or opto endstop is used to check for the presence of filament.
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
  *
- * RAMPS-based boards use SERVO3_PIN.
- * For other boards you may need to define FIL_RUNOUT_PIN.
- * By default the firmware assumes HIGH = has filament, LOW = ran out
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
 //#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
-  #define ENDSTOPPULLUP_FIL_RUNOUT // Uncomment to use internal pullup for filament runout pins if the sensor is defined.
+  #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 #endif
 
@@ -885,6 +979,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
 /**
  * Enable detailed logging of G28, G29, M48, etc.
  * Turn on with the command 'M111 S32'.
@@ -907,12 +1007,12 @@
   /**
    * Enable the G26 Mesh Validation Pattern tool.
    */
-  //#define G26_MESH_VALIDATION   // Enable G26 mesh validation
+  //#define G26_MESH_VALIDATION
   #if ENABLED(G26_MESH_VALIDATION)
-    #define MESH_TEST_NOZZLE_SIZE     0.4   // (mm) Diameter of primary nozzle.
-    #define MESH_TEST_LAYER_HEIGHT    0.2   // (mm) Default layer height for the G26 Mesh Validation Tool.
-    #define MESH_TEST_HOTEND_TEMP   205.0   // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
-    #define MESH_TEST_BED_TEMP       60.0   // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
+    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for the G26 Mesh Validation Tool.
+    #define MESH_TEST_HOTEND_TEMP  205.0  // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+    #define MESH_TEST_BED_TEMP      60.0  // (°C) Default bed temperature for the G26 Mesh Validation Tool.
   #endif
 
 #endif
@@ -924,13 +1024,10 @@
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Set the boundaries for probing (where the probe can reach).
-  #define LEFT_PROBE_BED_POSITION 15
-  #define RIGHT_PROBE_BED_POSITION 170
-  #define FRONT_PROBE_BED_POSITION 20
-  #define BACK_PROBE_BED_POSITION 170
-
-  // The Z probe minimum outer margin (to validate G29 parameters).
-  #define MIN_PROBE_EDGE 10
+  //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
+  //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+  //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
 
   // Probe along the Y axis, advancing X after each column
   //#define PROBE_Y_FIRST
@@ -953,17 +1050,6 @@
 
   #endif
 
-#elif ENABLED(AUTO_BED_LEVELING_3POINT)
-
-  // 3 arbitrary points to probe.
-  // A simple cross-product is used to estimate the plane of the bed.
-  #define ABL_PROBE_PT_1_X 15
-  #define ABL_PROBE_PT_1_Y 180
-  #define ABL_PROBE_PT_2_X 15
-  #define ABL_PROBE_PT_2_Y 20
-  #define ABL_PROBE_PT_3_X 170
-  #define ABL_PROBE_PT_3_Y 20
-
 #elif ENABLED(AUTO_BED_LEVELING_UBL)
 
   //===========================================================================
@@ -972,27 +1058,23 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Mesh inset margin on print area
+  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
-  #define UBL_PROBE_PT_1_X 39       // Probing points for 3-Point leveling of the mesh
-  #define UBL_PROBE_PT_1_Y 180
-  #define UBL_PROBE_PT_2_X 39
-  #define UBL_PROBE_PT_2_Y 20
-  #define UBL_PROBE_PT_3_X 180
-  #define UBL_PROBE_PT_3_Y 20
-
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
+  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+                                          // as the Z-Height correction value.
+
 #elif ENABLED(MESH_BED_LEVELING)
 
   //===========================================================================
   //=================================== Mesh ==================================
   //===========================================================================
 
-  #define MESH_INSET 10          // Mesh inset margin on print area
+  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
@@ -1001,8 +1083,21 @@
 #endif // BED_LEVELING
 
 /**
- * Use the LCD controller for bed leveling
- * Requires MESH_BED_LEVELING or PROBE_MANUALLY
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+  //#define PROBE_PT_1_X 15
+  //#define PROBE_PT_1_Y 180
+  //#define PROBE_PT_2_X 15
+  //#define PROBE_PT_2_Y 20
+  //#define PROBE_PT_3_X 170
+  //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
  */
 //#define LCD_BED_LEVELING
 
@@ -1014,6 +1109,11 @@
 // Add a menu item to move between bed corners for manual bed adjustment
 #define LEVEL_BED_CORNERS
 
+#if ENABLED(LEVEL_BED_CORNERS)
+  #define LEVEL_CORNERS_INSET 30    // (mm) An inset for corner leveling
+  //#define LEVEL_CENTER_TOO        // Move to the center after the last corner
+#endif
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -1164,7 +1264,7 @@
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
 /**
- * Nozzle Park -- EXPERIMENTAL
+ * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
  *
@@ -1174,11 +1274,13 @@
  *    P1  Raise the nozzle always to Z-park height.
  *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
  */
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
   #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1285,11 +1387,11 @@
  *
  * Select the language to display on the LCD. These languages are available:
  *
- *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, eu, fi, fr, fr_utf8, gl,
- *    hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8,
- *    tr, uk, zh_CN, zh_TW, test
+ *    en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8,
+ *    eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt,
+ *    pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test
  *
- * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' }
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' }
  */
 #define LCD_LANGUAGE en
 
@@ -1317,19 +1419,6 @@
  */
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 
-/**
- * LCD TYPE
- *
- * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD.
- * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display.
- * (These options will be enabled automatically for most displays.)
- *
- * IMPORTANT: The U8glib library is required for Full Graphic Display!
- *            https://github.com/olikraus/U8glib_Arduino
- */
-//#define ULTRA_LCD   // Character based
-//#define DOGLCD      // Full graphics display
-
 /**
  * SD CARD
  *
@@ -1356,19 +1445,28 @@
  */
 //#define SD_CHECK_AND_RETRY
 
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
 //
 // ENCODER SETTINGS
 //
 // This option overrides the default number of encoder pulses needed to
 // produce one step. Should be increased for high-resolution encoders.
 //
-#define ENCODER_PULSES_PER_STEP 4
+//#define ENCODER_PULSES_PER_STEP 4
 
 //
 // Use this option to override the number of step signals required to
 // move between next/prev menu items.
 //
-#define ENCODER_STEPS_PER_MENU_ITEM 1
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
 
 /**
  * Encoder Direction Options
@@ -1420,12 +1518,18 @@
 //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000
 
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//========================   (Character-based LCDs)   =========================
+//=============================================================================
+
 //
-// CONTROLLER TYPE: Standard
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
 //
-// Marlin supports a wide variety of controllers.
-// Enable one of the following options to specify your controller.
+// Note: Usually sold with a white PCB.
 //
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // ULTIMAKER Controller.
@@ -1443,40 +1547,6 @@
 //
 //#define PANEL_ONE
 
-//
-// MaKr3d Makr-Panel with graphic controller and SD support.
-// http://reprap.org/wiki/MaKr3d_MaKrPanel
-//
-//#define MAKRPANEL
-
-//
-// ReprapWorld Graphical LCD
-// https://reprapworld.com/?products_details&products_id/1218
-//
-//#define REPRAPWORLD_GRAPHICAL_LCD
-
-//
-// Activate one of these if you have a Panucatt Devices
-// Viki 2.0 or mini Viki with Graphic LCD
-// http://panucatt.com
-//
-//#define VIKI2
-//#define miniVIKI
-
-//
-// Adafruit ST7565 Full Graphic Controller.
-// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
-//
-//#define ELB_FULL_GRAPHIC_CONTROLLER
-
-//
-// RepRapDiscount Smart Controller.
-// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
-//
-// Note: Usually sold with a white PCB.
-//
-//#define REPRAP_DISCOUNT_SMART_CONTROLLER
-
 //
 // GADGETS3D G3D LCD/SD Controller
 // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
@@ -1485,28 +1555,6 @@
 //
 //#define G3D_PANEL
 
-//
-// RepRapDiscount FULL GRAPHIC Smart Controller
-// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
-//
-//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-//
-// MakerLab Mini Panel with graphic
-// controller and SD support - http://reprap.org/wiki/Mini_panel
-//
-//#define MINIPANEL
-
-//
-// RepRapWorld REPRAPWORLD_KEYPAD v1.1
-// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
-//
-// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
-// is pressed, a value of 10.0 means 10mm per click.
-//
-//#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-
 //
 // RigidBot Panel V1.0
 // http://www.inventapart.com/
@@ -1514,33 +1562,28 @@
 //#define RIGIDBOT_PANEL
 
 //
-// BQ LCD Smart Controller shipped by
-// default with the BQ Hephestos 2 and Witbox 2.
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
 //
-//#define BQ_LCD_SMART_CONTROLLER
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
 //
-// Cartesio UI
-// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
-//
-//#define CARTESIO_UI
-
-//
-// ANET and Tronxy Controller supported displays.
+// ANET and Tronxy 20x4 Controller
 //
 //#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
                                   // This LCD is known to be susceptible to electrical interference
                                   // which scrambles the display.  Pressing any button clears it up.
                                   // This is a LCD2004 display with 5 analog buttons.
 
-//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
-                                  // A clone of the RepRapDiscount full graphics display but with
-                                  // different pins/wiring (see pins_ANET_10.h).
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
 
-//
-// LCD for Melzi Card with Graphical LCD
-//
-//#define LCD_FOR_MELZI
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//=====================   (I2C and Shift-Register LCDs)   =====================
+//=============================================================================
 
 //
 // CONTROLLER TYPE: I2C
@@ -1556,12 +1599,13 @@
 //#define RA_CONTROL_PANEL
 
 //
-// Sainsmart YW Robot (LCM1602) LCD Display
+// Sainsmart (YwRobot) LCD Displays
 //
-// Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+// These require F.Malpartida's LiquidCrystal_I2C library
 // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
 //
-//#define LCD_I2C_SAINSMART_YWROBOT
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
 
 //
 // Generic LCM1602 LCD adapter
@@ -1586,6 +1630,83 @@
 //
 //#define LCD_I2C_VIKI
 
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//=======================   LCD / Controller Selection  =======================
+//=========================      (Graphical LCDs)      ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+//            https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
 //
 // SSD1306 OLED full graphics generic display
 //
@@ -1601,24 +1722,16 @@
 #endif
 
 //
-// CONTROLLER TYPE: Shift register panels
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
 //
-// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
-// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
-//
-//#define SAV_3DLCD
+//#define ULTI_CONTROLLER
 
 //
 // TinyBoy2 128x64 OLED / Encoder Panel
 //
 //#define OLED_PANEL_TINYBOY2
 
-//
-// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
-// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
-//
-//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
-
 //
 // MKS MINI12864 with graphic controller and SD support
 // http://reprap.org/wiki/MKS_MINI_12864
@@ -1634,6 +1747,13 @@
 //
 #define CR10_STOCKDISPLAY
 
+//
+// ANET and Tronxy Graphical Controller
+//
+//#define ANET_FULL_GRAPHICS_LCD  // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+                                  // A clone of the RepRapDiscount full graphics display but with
+                                  // different pins/wiring (see pins_ANET_10.h).
+
 //
 // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
 // http://reprap.org/wiki/MKS_12864OLED
@@ -1643,11 +1763,40 @@
 //#define MKS_12864OLED          // Uses the SH1106 controller (default)
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
+//
 // Silvergate GLCD controller
 // http://github.com/android444/Silvergate
 //
 //#define SILVER_GATE_GLCD_CONTROLLER
 
+//=============================================================================
+//============================  Other Controllers  ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+// This requires SDSUPPORT to be enabled
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
 //=============================================================================
 //=============================== Extra Features ==============================
 //=============================================================================
@@ -1707,7 +1856,7 @@
  * For Neopixel LED an overall brightness parameter is also available.
  *
  * *** CAUTION ***
- *  LED Strips require a MOFSET Chip between PWM lines and LEDs,
+ *  LED Strips require a MOSFET Chip between PWM lines and LEDs,
  *  as the Arduino cannot handle the current the LEDs will require.
  *  Failure to follow this precaution can destroy your Arduino!
  *  NOTE: A separate 5V power supply is required! The Neopixel LED needs

Marlin/example_configurations/Creality/CR-10/Configuration_adv.h

@@ -32,7 +32,7 @@
  */
 #ifndef CONFIGURATION_ADV_H
 #define CONFIGURATION_ADV_H
-#define CONFIGURATION_ADV_H_VERSION 010107
+#define CONFIGURATION_ADV_H_VERSION 010109
 
 // @section temperature
 
@@ -40,6 +40,17 @@
 //=============================Thermal Settings  ============================
 //===========================================================================
 
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+  #undef TEMP_SENSOR_BED
+  #define TEMP_SENSOR_BED 70
+  #define HEATER_BED_INVERTING true
+#endif
+
 #if DISABLED(PIDTEMPBED)
   #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
   #if ENABLED(BED_LIMIT_SWITCHING)
@@ -171,10 +182,12 @@
 
 // @section temperature
 
-//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements.
-//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET"
-#define TEMP_SENSOR_AD595_OFFSET 0.0
-#define TEMP_SENSOR_AD595_GAIN   1.0
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET  0.0
+#define TEMP_SENSOR_AD595_GAIN    1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN   1.0
 
 /**
  * Controller Fan
@@ -185,7 +198,7 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN FAN1_PIN  // Set a custom pin for the controller fan
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
   #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
   #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
@@ -195,10 +208,20 @@
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
 //#define FAN_KICKSTART_TIME 100
 
-// This defines the minimal speed for the main fan, run in PWM mode
-// to enable uncomment and set minimal PWM speed for reliable running (1-255)
-// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
 //#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
 
 // @section extruder
 
@@ -219,6 +242,7 @@
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED   255  // == full speed
 
@@ -243,6 +267,10 @@
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105   // Set default power-up brightness (0-255, requires PWM pin)
   //#define MENU_ITEM_CASE_LIGHT              // Add a Case Light option to the LCD main menu
+  //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+  #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+    #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+  #endif
 #endif
 
 //===========================================================================
@@ -358,6 +386,9 @@
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
 // @section machine
 
 #define AXIS_RELATIVE_MODES {false, false, false, false}
@@ -410,8 +441,24 @@
 // if unwanted behavior is observed on a user's machine when running at very slow speeds.
 #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec)
 
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+  #define JUNCTION_DEVIATION_MM 0.02  // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
 // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
-#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16]
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
  *  @section  stepper motor current
@@ -454,7 +501,8 @@
 
 //#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
 #define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8
-// Actual motor currents in Amps, need as many here as DIGIPOT_I2C_NUM_CHANNELS
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
 #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
 
 //===========================================================================
@@ -482,6 +530,20 @@
 // The timeout (in ms) to return to the status screen from sub-menus
 //#define LCD_TIMEOUT_TO_STATUS 15000
 
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
+  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #if ENABLED(LCD_PROGRESS_BAR)
+    #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
+    #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
+    #define PROGRESS_MSG_EXPIRE   0       // (ms) Amount of time to retain the status message (0=forever)
+    //#define PROGRESS_MSG_ONCE           // Show the message for MSG_TIME then clear it
+    //#define LCD_PROGRESS_BAR_TEST       // Add a menu item to test the progress bar
+  #endif
+#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
+
 /**
  * LED Control Menu
  * Enable this feature to add LED Control to the LCD menu
@@ -518,6 +580,20 @@
   // Add an option in the menu to run all auto#.g files
   //#define MENU_ADDAUTOSTART
 
+  /**
+   * Continue after Power-Loss (Creality3D)
+   *
+   * Store the current state to the SD Card at the start of each layer
+   * during SD printing. If the recovery file is found at boot time, present
+   * an option on the LCD screen to continue the print from the last-known
+   * point in the file.
+   */
+  //#define POWER_LOSS_RECOVERY
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    //#define POWER_LOSS_PIN   44     // Pin to detect power loss
+    //#define POWER_LOSS_STATE HIGH   // State of pin indicating power loss
+  #endif
+
   /**
    * Sort SD file listings in alphabetical order.
    *
@@ -556,25 +632,6 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // Show a progress bar on HD44780 LCDs for SD printing
-  //#define LCD_PROGRESS_BAR
-
-  #if ENABLED(LCD_PROGRESS_BAR)
-    // Amount of time (ms) to show the bar
-    #define PROGRESS_BAR_BAR_TIME 2000
-    // Amount of time (ms) to show the status message
-    #define PROGRESS_BAR_MSG_TIME 3000
-    // Amount of time (ms) to retain the status message (0=forever)
-    #define PROGRESS_MSG_EXPIRE   0
-    // Enable this to show messages for MSG_TIME then hide them
-    //#define PROGRESS_MSG_ONCE
-    // Add a menu item to test the progress bar:
-    //#define LCD_PROGRESS_BAR_TEST
-  #endif
-
-  // Add an 'M73' G-code to set the current percentage
-  //#define LCD_SET_PROGRESS_MANUALLY
-
   // This allows hosts to request long names for files and folders with M33
   //#define LONG_FILENAME_HOST_SUPPORT
 
@@ -595,6 +652,11 @@
    */
   //#define SD_REPRINT_LAST_SELECTED_FILE
 
+  /**
+   * Auto-report SdCard status with M27 S<seconds>
+   */
+  //#define AUTO_REPORT_SD_STATUS
+
 #endif // SDSUPPORT
 
 /**
@@ -610,6 +672,9 @@
  * printing performance versus fast display updates.
  */
 #if ENABLED(DOGLCD)
+  // Show SD percentage next to the progress bar
+  //#define DOGM_SD_PERCENT
+
   // Enable to save many cycles by drawing a hollow frame on the Info Screen
   #define XYZ_HOLLOW_FRAME
 
@@ -631,6 +696,25 @@
   // Swap the CW/CCW indicators in the graphics overlay
   //#define OVERLAY_GFX_REVERSE
 
+  #if ENABLED(U8GLIB_ST7920)
+    /**
+     * ST7920-based LCDs can emulate a 16 x 4 character display using
+     * the ST7920 character-generator for very fast screen updates.
+     * Enable LIGHTWEIGHT_UI to use this special display mode.
+     *
+     * Since LIGHTWEIGHT_UI has limited space, the position and status
+     * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+     * length of time to display the status message before clearing.
+     *
+     * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+     * This will prevent position updates from being displayed.
+     */
+    //#define LIGHTWEIGHT_UI
+    #if ENABLED(LIGHTWEIGHT_UI)
+      #define STATUS_EXPIRE_SECONDS 20
+    #endif
+  #endif
+
 #endif // DOGLCD
 
 // @section safety
@@ -670,53 +754,29 @@
 // @section extruder
 
 /**
- * Implementation of linear pressure control
+ * Linear Pressure Control v1.5
  *
- * Assumption: advance = k * (delta velocity)
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
  * K=0 means advance disabled.
- * See Marlin documentation for calibration instructions.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
 //#define LIN_ADVANCE
-
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 75
-
-  /**
-   * Some Slicers produce Gcode with randomly jumping extrusion widths occasionally.
-   * For example within a 0.4mm perimeter it may produce a single segment of 0.05mm width.
-   * While this is harmless for normal printing (the fluid nature of the filament will
-   * close this very, very tiny gap), it throws off the LIN_ADVANCE pressure adaption.
-   *
-   * For this case LIN_ADVANCE_E_D_RATIO can be used to set the extrusion:distance ratio
-   * to a fixed value. Note that using a fixed ratio will lead to wrong nozzle pressures
-   * if the slicer is using variable widths or layer heights within one print!
-   *
-   * This option sets the default E:D ratio at startup. Use `M900` to override this value.
-   *
-   * Example: `M900 W0.4 H0.2 D1.75`, where:
-   *   - W is the extrusion width in mm
-   *   - H is the layer height in mm
-   *   - D is the filament diameter in mm
-   *
-   * Example: `M900 R0.0458` to set the ratio directly.
-   *
-   * Set to 0 to auto-detect the ratio based on given Gcode G1 print moves.
-   *
-   * Slic3r (including Průša Control) produces Gcode compatible with the automatic mode.
-   * Cura (as of this writing) may produce Gcode incompatible with the automatic mode.
-   */
-  #define LIN_ADVANCE_E_D_RATIO 0 // The calculated ratio (or 0) according to the formula W * H / ((D / 2) ^ 2 * PI)
-                                  // Example: 0.4 * 0.2 / ((1.75 / 2) ^ 2 * PI) = 0.033260135
+  #define LIN_ADVANCE_K 0.22  // Unit: mm compression per 1mm/s extruder speed
+  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
 // @section leveling
 
-#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
-  #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
-  #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-#endif
-
 #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
   //#define MESH_MIN_X MESH_INSET
@@ -751,9 +811,40 @@
 // Moves (or segments) with fewer steps than this will be joined with the next move
 #define MIN_STEPS_PER_SEGMENT 6
 
-// The minimum pulse width (in µs) for stepping a stepper.
-// Set this if you find stepping unreliable, or if using a very fast CPU.
-#define MINIMUM_STEPPER_PULSE 0 // (µs) The smallest stepper pulse allowed
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ *     0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ *    20 : Minimum for TMC2xxx drivers
+ *   200 : Minimum for A4988 drivers
+ *   500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ *   650 : Minimum for DRV8825 drivers
+ *  1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ *   1 : Minimum for A4988 stepper drivers
+ *   1 : Minimum for LV8729 stepper drivers
+ *   2 : Minimum for DRV8825 stepper drivers
+ *   3 : Minimum for TB6600 stepper drivers
+ *  30 : Minimum for TB6560 stepper drivers
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ *  500000 : Maximum for A4988 stepper driver
+ *  400000 : Maximum for TMC2xxx stepper drivers
+ *  250000 : Maximum for DRV8825 stepper driver
+ *  150000 : Maximum for TB6600 stepper driver
+ *  130000 : Maximum for LV8729 stepper driver
+ *   15000 : Maximum for TB6560 stepper driver
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
 
 // @section temperature
 
@@ -873,62 +964,60 @@
  * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
  *
  * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
 #define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #define PAUSE_PARK_X_POS   3                // X position of hotend
-  #define PAUSE_PARK_Y_POS 297                // Y position of hotend
-  #define PAUSE_PARK_Z_ADD   5                // Z addition of hotend (lift)
-  #define PAUSE_PARK_XY_FEEDRATE 100          // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
-  #define PAUSE_PARK_Z_FEEDRATE 5             // Z axis feedrate in mm/s (not used for delta printers)
-  #define PAUSE_PARK_RETRACT_FEEDRATE 60      // Initial retract feedrate in mm/s
-  #define PAUSE_PARK_RETRACT_LENGTH 4         // Initial retract in mm
-                                              // It is a short retract used immediately after print interrupt before move to filament exchange position
-  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10  // Unload filament feedrate in mm/s - filament unloading can be fast
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH 420   // Unload filament length from hotend in mm
-                                              // Longer length for bowden printers to unload filament from whole bowden tube,
-                                              // shorter length for printers without bowden to unload filament from extruder only,
-                                              // 0 to disable unloading for manual unloading
-  #define FILAMENT_CHANGE_LOAD_FEEDRATE 8     // Load filament feedrate in mm/s - filament loading into the bowden tube can be fast
-  #define FILAMENT_CHANGE_LOAD_LENGTH 0       // Load filament length over hotend in mm
-                                              // Longer length for bowden printers to fast load filament into whole bowden tube over the hotend,
-                                              // Short or zero length for printers without bowden where loading is not used
-  #define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3   // Extrude filament feedrate in mm/s - must be slower than load feedrate
-  #define ADVANCED_PAUSE_EXTRUDE_LENGTH 50    // Extrude filament length in mm after filament is loaded over the hotend,
-                                              // 0 to disable for manual extrusion
-                                              // Filament can be extruded repeatedly from the filament exchange menu to fill the hotend,
-                                              // or until outcoming filament color is not clear for filament color change
-  #define PAUSE_PARK_NOZZLE_TIMEOUT 120       // Turn off nozzle if user doesn't change filament within this time limit in seconds
-  #define FILAMENT_CHANGE_NUMBER_OF_ALERT_BEEPS 3 // Number of alert beeps before printer goes quiet
-  #define PAUSE_PARK_NO_STEPPER_TIMEOUT       // Enable to have stepper motors hold position during filament change
-                                              // even if it takes longer than DEFAULT_STEPPER_DEACTIVE_TIME.
-  #define PARK_HEAD_ON_PAUSE                  // Go to filament change position on pause, return to print position on resume
-  #define HOME_BEFORE_FILAMENT_CHANGE         // Ensure homing has been completed prior to parking for filament change
+  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
+                                                  // This short retract is done immediately, before parking the nozzle.
+  #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH      420  // (mm) The length of filament for a complete unload.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+                                                  //   Set to 0 for manual unloading.
+  #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+                                                  // 0 to disable start loading and skip to fast load only
+  #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   8  // (mm/s) Load filament feedrate. This can be pretty fast.
+  #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+                                                  //   For Bowden, the full length of the tube and nozzle.
+                                                  //   For direct drive, the full length of the nozzle.
+  //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
+  #define ADVANCED_PAUSE_PURGE_FEEDRATE        3  // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+  #define ADVANCED_PAUSE_PURGE_LENGTH         50  // (mm) Length to extrude after loading.
+                                                  //   Set to 0 for manual extrusion.
+                                                  //   Filament can be extruded repeatedly from the Filament Change menu
+                                                  //   until extrusion is consistent, and to purge old filament.
+
+                                                  // Filament Unload does a Retract, Delay, and Purge first:
+  #define FILAMENT_UNLOAD_RETRACT_LENGTH      13  // (mm) Unload initial retract length.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_PURGE_LENGTH         8  // (mm) An unretract is done, then this length is purged.
+
+  #define PAUSE_PARK_NOZZLE_TIMEOUT          120  // (seconds) Time limit before the nozzle is turned off for safety.
+  #define FILAMENT_CHANGE_ALERT_BEEPS          6  // Number of alert beeps to play when a response is needed.
+  #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
+
+  #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
+  #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
+
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
 #endif
 
 // @section tmc
 
 /**
- * Enable this section if you have TMC26X motor drivers.
- * You will need to import the TMC26XStepper library into the Arduino IDE for this
- * (https://github.com/trinamic/TMC26XStepper.git)
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
  */
-//#define HAVE_TMCDRIVER
-
-#if ENABLED(HAVE_TMCDRIVER)
-
-  //#define X_IS_TMC
-  //#define X2_IS_TMC
-  //#define Y_IS_TMC
-  //#define Y2_IS_TMC
-  //#define Z_IS_TMC
-  //#define Z2_IS_TMC
-  //#define E0_IS_TMC
-  //#define E1_IS_TMC
-  //#define E2_IS_TMC
-  //#define E3_IS_TMC
-  //#define E4_IS_TMC
+#if HAS_DRIVER(TMC26X)
 
   #define X_MAX_CURRENT     1000 // in mA
   #define X_SENSE_RESISTOR    91 // in mOhms
@@ -976,62 +1065,27 @@
 
 #endif
 
-// @section TMC2130, TMC2208
+// @section tmc_smart
 
 /**
- * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers.
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
  *
  * You'll also need the TMC2130Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2130Stepper).
  *
- * To use TMC2130 stepper drivers in SPI mode connect your SPI2130 pins to
- * the hardware SPI interface on your board and define the required CS pins
- * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
- */
-//#define HAVE_TMC2130
-
-/**
- * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers.
- * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin.
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
  * To use the reading capabilities, also connect #_SERIAL_RX_PIN
- * to #_SERIAL_TX_PIN with a 1K resistor.
+ * to PDN_UART without a resistor.
  * The drivers can also be used with hardware serial.
  *
  * You'll also need the TMC2208Stepper Arduino library
  * (https://github.com/teemuatlut/TMC2208Stepper).
  */
-//#define HAVE_TMC2208
-
-#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208)
-
-  // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY
-  //#define X_IS_TMC2130
-  //#define X2_IS_TMC2130
-  //#define Y_IS_TMC2130
-  //#define Y2_IS_TMC2130
-  //#define Z_IS_TMC2130
-  //#define Z2_IS_TMC2130
-  //#define E0_IS_TMC2130
-  //#define E1_IS_TMC2130
-  //#define E2_IS_TMC2130
-  //#define E3_IS_TMC2130
-  //#define E4_IS_TMC2130
-
-  //#define X_IS_TMC2208
-  //#define X2_IS_TMC2208
-  //#define Y_IS_TMC2208
-  //#define Y2_IS_TMC2208
-  //#define Z_IS_TMC2208
-  //#define Z2_IS_TMC2208
-  //#define E0_IS_TMC2208
-  //#define E1_IS_TMC2208
-  //#define E2_IS_TMC2208
-  //#define E3_IS_TMC2208
-  //#define E4_IS_TMC2208
-
-  /**
-   * Stepper driver settings
-   */
+#if HAS_TRINAMIC
 
   #define R_SENSE           0.11  // R_sense resistor for SilentStepStick2130
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -1070,6 +1124,16 @@
   #define E4_CURRENT         800
   #define E4_MICROSTEPS       16
 
+  /**
+   * Use software SPI for TMC2130.
+   * The default SW SPI pins are defined the respective pins files,
+   * but you can override or define them here.
+   */
+  //#define TMC_USE_SW_SPI
+  //#define TMC_SW_MOSI       -1
+  //#define TMC_SW_MISO       -1
+  //#define TMC_SW_SCK        -1
+
   /**
    * Use Trinamic's ultra quiet stepping mode.
    * When disabled, Marlin will use spreadCycle stepping mode.
@@ -1118,20 +1182,21 @@
   /**
    * Use stallGuard2 to sense an obstacle and trigger an endstop.
    * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin.
-   * X and Y homing will always be done in spreadCycle mode.
+   * X, Y, and Z homing will always be done in spreadCycle mode.
    *
-   * X/Y_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
+   * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity.
    * Higher values make the system LESS sensitive.
    * Lower value make the system MORE sensitive.
    * Too low values can lead to false positives, while too high values will collide the axis without triggering.
-   * It is advised to set X/Y_HOME_BUMP_MM to 0.
-   * M914 X/Y to live tune the setting
+   * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+   * M914 X/Y/Z to live tune the setting
    */
   //#define SENSORLESS_HOMING // TMC2130 only
 
   #if ENABLED(SENSORLESS_HOMING)
     #define X_HOMING_SENSITIVITY  8
     #define Y_HOMING_SENSITIVITY  8
+    #define Z_HOMING_SENSITIVITY  8
   #endif
 
   /**
@@ -1140,6 +1205,22 @@
    */
   //#define TMC_DEBUG
 
+  /**
+   * M915 Z Axis Calibration
+   *
+   * - Adjust Z stepper current,
+   * - Drive the Z axis to its physical maximum, and
+   * - Home Z to account for the lost steps.
+   *
+   * Use M915 Snn to specify the current.
+   * Use M925 Znn to add extra Z height to Z_MAX_POS.
+   */
+  //#define TMC_Z_CALIBRATION
+  #if ENABLED(TMC_Z_CALIBRATION)
+    #define CALIBRATION_CURRENT 250
+    #define CALIBRATION_EXTRA_HEIGHT 10
+  #endif
+
   /**
    * You can set your own advanced settings by filling in predefined functions.
    * A list of available functions can be found on the library github page
@@ -1152,85 +1233,61 @@
    *   stepperY.interpolate(0); \
    * }
    */
-  #define  TMC_ADV() {  }
+  #define TMC_ADV() {  }
 
 #endif // TMC2130 || TMC2208
 
 // @section L6470
 
 /**
- * Enable this section if you have L6470 motor drivers.
- * You need to import the L6470 library into the Arduino IDE for this.
- * (https://github.com/ameyer/Arduino-L6470)
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
  */
-
-//#define HAVE_L6470DRIVER
-#if ENABLED(HAVE_L6470DRIVER)
-
-  //#define X_IS_L6470
-  //#define X2_IS_L6470
-  //#define Y_IS_L6470
-  //#define Y2_IS_L6470
-  //#define Z_IS_L6470
-  //#define Z2_IS_L6470
-  //#define E0_IS_L6470
-  //#define E1_IS_L6470
-  //#define E2_IS_L6470
-  //#define E3_IS_L6470
-  //#define E4_IS_L6470
+#if HAS_DRIVER(L6470)
 
   #define X_MICROSTEPS      16 // number of microsteps
-  #define X_K_VAL           50 // 0 - 255, Higher values, are higher power. Be careful not to go too high
   #define X_OVERCURRENT   2000 // maxc current in mA. If the current goes over this value, the driver will switch off
   #define X_STALLCURRENT  1500 // current in mA where the driver will detect a stall
 
   #define X2_MICROSTEPS     16
-  #define X2_K_VAL          50
   #define X2_OVERCURRENT  2000
   #define X2_STALLCURRENT 1500
 
   #define Y_MICROSTEPS      16
-  #define Y_K_VAL           50
   #define Y_OVERCURRENT   2000
   #define Y_STALLCURRENT  1500
 
   #define Y2_MICROSTEPS     16
-  #define Y2_K_VAL          50
   #define Y2_OVERCURRENT  2000
   #define Y2_STALLCURRENT 1500
 
   #define Z_MICROSTEPS      16
-  #define Z_K_VAL           50
   #define Z_OVERCURRENT   2000
   #define Z_STALLCURRENT  1500
 
   #define Z2_MICROSTEPS     16
-  #define Z2_K_VAL          50
   #define Z2_OVERCURRENT  2000
   #define Z2_STALLCURRENT 1500
 
   #define E0_MICROSTEPS     16
-  #define E0_K_VAL          50
   #define E0_OVERCURRENT  2000
   #define E0_STALLCURRENT 1500
 
   #define E1_MICROSTEPS     16
-  #define E1_K_VAL          50
   #define E1_OVERCURRENT  2000
   #define E1_STALLCURRENT 1500
 
   #define E2_MICROSTEPS     16
-  #define E2_K_VAL          50
   #define E2_OVERCURRENT  2000
   #define E2_STALLCURRENT 1500
 
   #define E3_MICROSTEPS     16
-  #define E3_K_VAL          50
   #define E3_OVERCURRENT  2000
   #define E3_STALLCURRENT 1500
 
   #define E4_MICROSTEPS     16
-  #define E4_K_VAL          50
   #define E4_OVERCURRENT  2000
   #define E4_STALLCURRENT 1500
 
@@ -1448,6 +1505,14 @@
  */
 //#define ACTION_ON_KILL "poweroff"
 
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
 //===========================================================================
 //====================== I2C Position Encoder Settings ======================
 //===========================================================================
@@ -1481,7 +1546,7 @@
   //#define I2CPE_ENC_1_TICKS_REV     (16 * 200)            // Only needed for rotary encoders; number of stepper
                                                             // steps per full revolution (motor steps/rev * microstepping)
   //#define I2CPE_ENC_1_INVERT                              // Invert the direction of axis travel.
-  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_NONE          // Type of error error correction.
+  #define I2CPE_ENC_1_EC_METHOD     I2CPE_ECM_MICROSTEP     // Type of error error correction.
   #define I2CPE_ENC_1_EC_THRESH     0.10                    // Threshold size for error (in mm) above which the
                                                             // printer will attempt to correct the error; errors
                                                             // smaller than this are ignored to minimize effects of
@@ -1493,7 +1558,7 @@
   #define I2CPE_ENC_2_TICKS_UNIT    2048
   //#define I2CPE_ENC_2_TICKS_REV   (16 * 200)
   //#define I2CPE_ENC_2_INVERT
-  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_NONE
+  #define I2CPE_ENC_2_EC_METHOD     I2CPE_ECM_MICROSTEP
   #define I2CPE_ENC_2_EC_THRESH     0.10
 
   #define I2CPE_ENC_3_ADDR          I2CPE_PRESET_ADDR_Z     // Encoder 3.  Add additional configuration options
@@ -1525,7 +1590,7 @@
    * this setting determines the minimum update time between checks. A value of 100 works well with
    * error rolling average when attempting to correct only for skips and not for vibration.
    */
-  #define I2CPE_MIN_UPD_TIME_MS     100                     // Minimum time in miliseconds between encoder checks.
+  #define I2CPE_MIN_UPD_TIME_MS     4                       // (ms) Minimum time between encoder checks.
 
   // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
   #define I2CPE_ERR_ROLLING_AVERAGE
@@ -1535,27 +1600,29 @@
 /**
  * MAX7219 Debug Matrix
  *
- * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status
- * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
- *
- * Fully assembled MAX7219 boards can be found on the internet for under $2(US).
- * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
  */
 //#define MAX7219_DEBUG
 #if ENABLED(MAX7219_DEBUG)
-  #define MAX7219_CLK_PIN   64  // 77 on Re-ARM       // Configuration of the 3 pins to control the display
-  #define MAX7219_DIN_PIN   57  // 78 on Re-ARM
-  #define MAX7219_LOAD_PIN  44  // 79 on Re-ARM
+  #define MAX7219_CLK_PIN   64
+  #define MAX7219_DIN_PIN   57
+  #define MAX7219_LOAD_PIN  44
 
+  //#define MAX7219_GCODE          // Add the M7219 G-code to control the LED matrix
+  #define MAX7219_INIT_TEST 2      // Do a test pattern at initialization (Set to 2 for spiral)
+  #define MAX7219_NUMBER_UNITS 1   // Number of Max7219 units in chain.
+  #define MAX7219_ROTATE       0   // Rotate the display clockwise (in multiples of +/- 90°)
+                                   // connector at:  right=0   bottom=-90  top=90  left=180
   /**
    * Sample debug features
    * If you add more debug displays, be careful to avoid conflicts!
    */
   #define MAX7219_DEBUG_PRINTER_ALIVE    // Blink corner LED of 8x8 matrix to show that the firmware is functioning
-  #define MAX7219_DEBUG_STEPPER_HEAD  3  // Show the stepper queue head position on this and the next LED matrix row
-  #define MAX7219_DEBUG_STEPPER_TAIL  5  // Show the stepper queue tail position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_HEAD  3  // Show the planner queue head position on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_TAIL  5  // Show the planner queue tail position on this and the next LED matrix row
 
-  #define MAX7219_DEBUG_STEPPER_QUEUE 0  // Show the current stepper queue depth on this and the next LED matrix row
+  #define MAX7219_DEBUG_PLANNER_QUEUE 0  // Show the current planner queue depth on this and the next LED matrix row
                                          // If you experience stuttering, reboots, etc. this option can reveal how
                                          // tweaks made to the configuration are affecting the printer in real-time.
 #endif
@@ -1573,4 +1640,7 @@
                               // Default behaviour is limited to Z axis only.
 #endif
 
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
+
 #endif // CONFIGURATION_ADV_H

Marlin/example_configurations/Creality/CR-10/_Bootscreen.h

@@ -21,80 +21,35 @@
  */
 
 /**
- * Tongue-in-cheek placeholder for a more Marlin-specific bitmap
- * The joke is that every "CR-10" has different branding!
- * Made using The Gimp and...
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
  */
-#include <avr/pgmspace.h>
 
-#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  54
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
 
 const unsigned char custom_start_bmp[] PROGMEM = {
-  0x00, 0x00, 0x00, 0x01, 0xE0, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3F, 0xF8, 0x00, 0x00,
-  0x00, 0x00, 0x03, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x0F, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x3F, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x0F, 0xF0,
-  0x00, 0x00, 0xFF, 0xFF, 0xFD, 0xFF, 0xF8,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
-  0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
-  0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0,
-  0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x7F, 0xFC, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x1F, 0x80, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFE, 0x3F, 0xF8,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xE0,
-  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFF, 0xC0,
-  0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFE, 0x00,
-  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xE0, 0x00,
-  0x00, 0x00, 0x07, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00
-};
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
+  B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
+  B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
+  B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
+  B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
+  B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
+  B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
+  B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
+  B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
+  B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
+  B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/example_configurations/Creality/CR-10/_Statusscreen.h

@@ -0,0 +1,80 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define STATUS_SCREENWIDTH 128
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38
+#define STATUS_SCREEN_BED_TEXT_X 73
+
+//============================================
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+  B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+  B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+  B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+  B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+  B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+  B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+  B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+  B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
+  B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
+  B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
+  B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+};
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+  B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+  B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+  B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+  B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+  B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+  B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
+  B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/example_configurations/Creality/CR-10S/_Bootscreen.h

@@ -0,0 +1,55 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
+  B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
+  B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
+  B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
+  B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
+  B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
+  B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
+  B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
+  B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
+  B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
+  B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h

@@ -0,0 +1,452 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define STATUS_SCREENWIDTH 128
+
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
+
+#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
+
+// Can also be overridden in Configuration.h
+#ifndef FAN_ANIM_FRAMES
+  #define FAN_ANIM_FRAMES 3
+#endif
+#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
+#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
+
+//============================================
+
+#if HOTENDS < 2
+
+  #if FAN_ANIM_FRAMES <= 2
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+    };
+
+  #elif FAN_ANIM_FRAMES == 3
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00111111,B11100001,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B10000001,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00111111,B11100001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B11111000,B11111001,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11111000,B11111101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B11110000,B01111011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B11110000,B01111011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000000,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00000111,B00111101,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B11111111,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000111,B11111111,B10000001,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000101,B11100111,B00000001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11000011,B00000001,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B10000011,B11000001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00000011,B11000011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B00000011,B11100011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000011,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
+    };
+    const unsigned char status_screen2_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000101,B11110111,B00000001,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B10000001,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B11111111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00000111,B01111101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00001110,B00111101,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00011110,B00011101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00111110,B00001011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B01111110,B00000011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000110,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
+    };
+
+  #elif FAN_ANIM_FRAMES == 4
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen2_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen3_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
+    };
+
+  #endif
+
+#else // HOTENDS >= 2
+
+  #if FAN_ANIM_FRAMES <= 2
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
+    };
+
+  #elif FAN_ANIM_FRAMES == 3
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
+    };
+    const unsigned char status_screen2_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
+    };
+
+  #elif FAN_ANIM_FRAMES == 4
+
+    const unsigned char status_screen0_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen1_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen2_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
+    };
+    const unsigned char status_screen3_bmp[] PROGMEM = {
+      B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
+      B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
+      B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
+      B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+      B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
+      B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
+      B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
+      B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
+      B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
+      B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
+      B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
+      B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
+      B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
+    };
+
+  #endif
+
+#endif // HOTENDS >= 2

Marlin/example_configurations/Creality/CR-10mini/_Bootscreen.h

@@ -0,0 +1,55 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
+  B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
+  B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
+  B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
+  B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
+  B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
+  B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
+  B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
+  B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
+  B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
+  B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
+  B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
+  B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/example_configurations/Creality/CR-10mini/_Statusscreen.h

@@ -0,0 +1,80 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define STATUS_SCREENWIDTH 128
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38
+#define STATUS_SCREEN_BED_TEXT_X 73
+
+//============================================
+
+const unsigned char status_screen0_bmp[] PROGMEM = {
+  B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+  B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+  B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+  B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+  B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+  B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+  B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+  B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+  B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+  B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
+  B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
+  B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
+  B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
+  B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
+  B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+  B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+};
+const unsigned char status_screen1_bmp[] PROGMEM = {
+  B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+  B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+  B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+  B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+  B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+  B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+  B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+  B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
+  B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+  B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
+  B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
+  B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+  B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+  B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+};

Marlin/example_configurations/Creality/Ender-2/README.md

@@ -0,0 +1,18 @@
+# Creality Ender Support
+
+This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
+
+* 1.0.0 had very different serial output in `setup()` and overall code structure.
+* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
+
+Configurations were found by seeing what code was compiled into the firmware, and constants used there.
+
+For U8Glib, at least version 1.14 and at most 1.17 is used, because
+
+* 1.12 didn't have the extra speed argument to u8g_InitCom.
+* 1.13 didn't have the soft reset instruction for UC1701 initialization.
+* 1.18 has a new directory structure.
+
+## Bitmaps
+
+The bootscreen and custom status screens come from Creality's firmware.

Marlin/example_configurations/Creality/Ender-2/_Bootscreen.h

@@ -0,0 +1,96 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
+#define CUSTOM_BOOTSCREEN_INVERTED
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
+  B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
+  B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
+  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
+  B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
+  B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
+  B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
+  B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
+  B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
+  B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
+  B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
+  B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
+  B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
+  B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
+  B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
+  B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
+  B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
+};

Marlin/example_configurations/Creality/Ender-2/_Statusscreen.h

@@ -0,0 +1,130 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define STATUS_SCREENWIDTH 128
+#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
+#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
+#define STATUS_SCREEN_FAN_TEXT_X 103
+
+//============================================
+
+#if HOTENDS < 2
+
+  const unsigned char status_screen0_bmp[] PROGMEM = {
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+    B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+    B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+    B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+    B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
+    B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
+    B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
+    B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
+    B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
+    B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
+    B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
+    B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+  };
+  const unsigned char status_screen1_bmp[] PROGMEM = {
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+    B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+    B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+    B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
+    B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
+    B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
+    B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
+    B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
+    B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
+  };
+
+#else // HOTENDS >= 2
+
+  const unsigned char status_screen0_bmp[] PROGMEM = {
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
+    B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
+    B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
+    B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
+    B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
+    B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
+    B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
+    B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
+    B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
+    B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
+    B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
+    B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
+  };
+  const unsigned char status_screen1_bmp[] PROGMEM = {
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
+    B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
+    B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
+    B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
+    B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
+    B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
+    B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
+    B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
+    B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
+    B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
+    B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
+    B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
+    B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
+  };
+
+#endif // HOTENDS >= 2