Add hex files

Fixed include paths

.circleci/config.yml

@@ -51,8 +51,8 @@ jobs:
             export PATH=`pwd`/buildroot/bin/:${PATH}
 
             # Generate custom version include
-            generate_version ./Marlin/
-            cat ./Marlin/Version.h
+            generate_version ./Marlin/src/inc
+            cat ./Marlin/src/inc/_Version.h
             #
             # Back up pins_RAMPS.h
             #

.travis.yml

@@ -13,6 +13,8 @@ env:
   - TEST_PLATFORM="DUE"
   - TEST_PLATFORM="esp32"
   - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="LPC1768"
+  - TEST_PLATFORM="LPC1769"
   - TEST_PLATFORM="megaatmega2560"
   - TEST_PLATFORM="STM32F103RE"
   - TEST_PLATFORM="teensy31"
@@ -25,26 +27,20 @@ env:
   - TEST_PLATFORM="sanguino_atmega1284p"
   - TEST_PLATFORM="sanguino_atmega644p"
 
-  # Broken Extended STM32 Environments
-  #- TEST_PLATFORM="ARMED"
-  #- TEST_PLATFORM="BIGTREE_BTT002"
-  #- TEST_PLATFORM="BIGTREE_SKR_PRO"
-
   # Extended STM32 Environments
+  - TEST_PLATFORM="ARMED"
+  - TEST_PLATFORM="BIGTREE_BTT002"
+  - TEST_PLATFORM="BIGTREE_SKR_PRO"
   - TEST_PLATFORM="STM32F103RC_bigtree"
   - TEST_PLATFORM="jgaurora_a5s_a1"
   - TEST_PLATFORM="STM32F103VE_longer"
   - TEST_PLATFORM="STM32F407VE_black"
-  - TEST_PLATFORM="mks_robin"
-
-  # Put lengthy tests last
-  - TEST_PLATFORM="LPC1768"
-  - TEST_PLATFORM="LPC1769"
 
   # Non-working environment tests
   #- TEST_PLATFORM="at90usb1286_cdc"
   #- TEST_PLATFORM="at90usb1286_dfu"
   #- TEST_PLATFORM="STM32F103CB_malyan"
+  #- TEST_PLATFORM="mks_robin"
   #- TEST_PLATFORM="mks_robin_lite"
   #- TEST_PLATFORM="mks_robin_mini"
   #- TEST_PLATFORM="mks_robin_nano"
@@ -77,8 +73,8 @@ before_script:
   - cd ${TRAVIS_BUILD_DIR}
   #
   # Generate custom version include
-  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/
-  - cat ${TRAVIS_BUILD_DIR}/Marlin/Version.h
+  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/src/inc
+  - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
   #
 script:
   - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

Marlin/Configuration_adv.h

@@ -140,7 +140,9 @@
   #define THERMAL_PROTECTION_PERIOD 60        // Seconds
   #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
-  #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #if DISABLED(MachineCR10Orig)
+    #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+  #endif
   #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
     #define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
   #endif
@@ -157,7 +159,7 @@
    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
    * below 2.
    */
-  #define WATCH_TEMP_PERIOD 60                // Seconds
+  #define WATCH_TEMP_PERIOD 50                // Seconds
   #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
@@ -165,14 +167,33 @@
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD 80    // Seconds
+#if(ENABLED(BedDC))
+  #if EITHER(MachineS5, MachineCR10Max)
+    #define THERMAL_PROTECTION_BED_PERIOD 240    // Seconds
+    #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius
+
+    #define WATCH_BED_TEMP_PERIOD 240                // Seconds
+    #define WATCH_BED_TEMP_INCREASE 4               // Degrees Celsius
+
+  #else
+    #define THERMAL_PROTECTION_BED_PERIOD 50    // Seconds
+    #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+
+    #define WATCH_BED_TEMP_PERIOD 180                // Seconds
+    #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+  #endif
+#else
+
+  #define THERMAL_PROTECTION_BED_PERIOD 30    // Seconds
   #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
 
+  #define WATCH_BED_TEMP_PERIOD 120                // Seconds
+  #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
+#endif
+
   /**
    * As described above, except for the bed (M140/M190/M303).
    */
-  #define WATCH_BED_TEMP_PERIOD 80                // Seconds
-  #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
 /**
@@ -209,14 +230,17 @@
  * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
  * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
  */
-#define AUTOTEMP
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define AUTOTEMP
+#endif
 #if ENABLED(AUTOTEMP)
   #define AUTOTEMP_OLDWEIGHT 0.98
 #endif
 
-// Show extra position information with 'M114 D'
-#define M114_DETAIL
-
+// Show extra position information in M114
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define M114_DETAIL
+#endif
 // Show Temperature ADC value
 // Enable for M105 to include ADC values read from temperature sensors.
 //#define SHOW_TEMP_ADC_VALUES
@@ -279,10 +303,9 @@
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
-  #define CONTROLLERFAN_SECS 60             // Duration in seconds for the fan to run after all motors are disabled
-  #define CONTROLLERFAN_SPEED 255           // 255 == full speed
-  //#define CONTROLLERFAN_SPEED_Z_ONLY 127  // Reduce noise on machines that keep Z enabled
+  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
+  #define CONTROLLERFAN_SECS 60          // Duration in seconds for the fan to run after all motors are disabled
+  #define CONTROLLERFAN_SPEED 255        // 255 == full speed
 #endif
 
 // When first starting the main fan, run it at full speed for the
@@ -346,14 +369,8 @@
  * Multiple extruders can be assigned to the same pin in which case
  * the fan will turn on when any selected extruder is above the threshold.
  */
-#if ENABLED(TREX3)
-  #define E0_AUTO_FAN_PIN  6
-  #define E1_AUTO_FAN_PIN  45
-#else
-  #define E0_AUTO_FAN_PIN -1
-  #define E1_AUTO_FAN_PIN -1
-#endif
-
+#define E0_AUTO_FAN_PIN -1
+#define E1_AUTO_FAN_PIN -1
 #define E2_AUTO_FAN_PIN -1
 #define E3_AUTO_FAN_PIN -1
 #define E4_AUTO_FAN_PIN -1
@@ -379,15 +396,19 @@
 /**
  * M355 Case Light on-off / brightness
  */
-#define CASE_LIGHT_ENABLE
+#if(ENABLED(EnclosureLight))
+  #define CASE_LIGHT_ENABLE
+#endif
 #if ENABLED(CASE_LIGHT_ENABLE)
-  //#define CASE_LIGHT_PIN 4                  // Override the default pin if needed
+  #if ENABLED(MachineCR2020)
+    #define CASE_LIGHT_PIN 65                  // Override the default pin if needed
+  #else
+    #define CASE_LIGHT_PIN 12                  // Override the default pin if needed
+  #endif
   #define INVERT_CASE_LIGHT false             // Set true if Case Light is ON when pin is LOW
   #define CASE_LIGHT_DEFAULT_ON true          // Set default power-up state on
   #define CASE_LIGHT_DEFAULT_BRIGHTNESS 255   // Set default power-up brightness (0-255, requires PWM pin)
-  //#define CASE_LIGHT_MAX_PWM 128            // Limit pwm
-  #define CASE_LIGHT_MENU                   // Add Case Light options to the LCD menu
-  #define CASE_LIGHT_NO_BRIGHTNESS          // Disable brightness control. Enable for non-PWM lighting.
+  #define CASE_LIGHT_MENU              // Add a Case Light option to the LCD main menu
   //#define CASE_LIGHT_USE_NEOPIXEL           // Use Neopixel LED as case light, requires NEOPIXEL_LED.
   #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
     #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
@@ -494,16 +515,12 @@
  *       Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
  *       follow with M605 S3 to initiate mirrored movement.
  */
-#define DUAL_X_CARRIAGE
+//#define DUAL_X_CARRIAGE
 #if ENABLED(DUAL_X_CARRIAGE)
   #define X1_MIN_POS X_MIN_POS   // Set to X_MIN_POS
   #define X1_MAX_POS X_BED_SIZE  // Set a maximum so the first X-carriage can't hit the parked second X-carriage
-  #define X2_MIN_POS     0       // Set a minimum to ensure the  second X-carriage can't hit the parked first X-carriage
-  #if DISABLED(TREX3) || ENABLED(TREX3_UPGRADE)
-    #define X2_MAX_POS 442       // Set this to the distance between toolheads when both heads are homed
-  #else
-    #define X2_MAX_POS 446       // Set this to the distance between toolheads when both heads are homed
-  #endif
+  #define X2_MIN_POS    80       // Set a minimum to ensure the  second X-carriage can't hit the parked first X-carriage
+  #define X2_MAX_POS   353       // Set this to the distance between toolheads when both heads are homed
   #define X2_HOME_DIR    1       // Set to 1. The second X-carriage always homes to the maximum endstop position
   #define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
                       // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
@@ -515,7 +532,7 @@
   #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
 
   // Default x offset in duplication mode (typically set to half print bed width)
-  #define DEFAULT_DUPLICATION_X_OFFSET 200
+  #define DEFAULT_DUPLICATION_X_OFFSET 100
 
 #endif // DUAL_X_CARRIAGE
 
@@ -583,7 +600,7 @@
    * differs, a mode set eeprom write will be completed at initialization.
    * Use the option below to force an eeprom write to a V3.1 probe regardless.
    */
-  //#define BLTOUCH_SET_5V_MODE
+  #define BLTOUCH_SET_5V_MODE
 
   /**
    * Safety: Activate if connecting a probe with an unknown voltage mode.
@@ -599,7 +616,9 @@
    * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
    * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
    */
-  #define BLTOUCH_HS_MODE
+  #if NONE(MachineCR10Orig, LowMemoryBoard)
+    #define BLTOUCH_HS_MODE
+  #endif
 
   // Safety: Enable voltage mode settings in the LCD menu.
   //#define BLTOUCH_LCD_VOLTAGE_MENU
@@ -613,32 +632,18 @@
 //#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3]
-  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }
-
-  // Provide Z stepper positions for more rapid convergence in bed alignment.
-  // Currently requires triple stepper drivers.
-  //#define Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS
-  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-    // Define Stepper XY positions for Z1, Z2, Z3 corresponding to
-    // the Z screw positions in the bed carriage.
-    // Define one position per Z stepper in stepper driver order.
-    #define Z_STEPPER_ALIGN_STEPPER_XY { { 210.7, 102.5 }, { 152.6, 220.0 }, { 94.5, 102.5 } }
-  #else
-    // Amplification factor. Used to scale the correction step up or down.
-    // In case the stepper (spindle) position is further out than the test point.
-    // Use a value > 1. NOTE: This may cause instability
-    #define Z_STEPPER_ALIGN_AMP 1.0
-  #endif
-
-  // Set number of iterations to align
+  #define Z_STEPPER_ALIGN_XY { {  10, 290 }, { 150,  10 }, { 290, 290 } }  // Set number of iterations to align
   #define Z_STEPPER_ALIGN_ITERATIONS 3
-
   // Enable to restore leveling setup after operation
   #define RESTORE_LEVELING_AFTER_G34
 
   // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
   #define G34_MAX_GRADE  5  // (%) Maximum incline G34 will handle
 
+  // Use the amplification factor to de-/increase correction step.
+  // In case the stepper (spindle) position is further out than the test point
+  // Use a value > 1. NOTE: This may cause instability
+  #define Z_STEPPER_ALIGN_AMP 1.0
   // Stop criterion. If the accuracy is better than this stop iterating early
   #define Z_STEPPER_ALIGN_ACC 0.02
 #endif
@@ -668,14 +673,17 @@
 #define DEFAULT_MINIMUMFEEDRATE       0.0     // minimum feedrate
 #define DEFAULT_MINTRAVELFEEDRATE     0.0
 
-//#define HOME_AFTER_DEACTIVATE  // Require rehoming after steppers are deactivated
+#if ANY(MachineEnder5, MachineEnder5Plus)
+  #define HOME_AFTER_DEACTIVATE  // Require rehoming after steppers are deactivated
+#endif
 
 // Minimum time that a segment needs to take if the buffer is emptied
 #define DEFAULT_MINSEGMENTTIME        20000   // (ms)
 
 // If defined the movements slow down when the look ahead buffer is only half full
-#define SLOWDOWN
-
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define SLOWDOWN
+#endif
 // Frequency limit
 // See nophead's blog for more info
 // Not working O
@@ -873,7 +881,9 @@
 #if HAS_LCD_MENU
 
   // Include a page of printer information in the LCD Main Menu
-  #define LCD_INFO_MENU
+  #if(DISABLED(MachineCR10Orig))
+    #define LCD_INFO_MENU
+  #endif
   #if ENABLED(LCD_INFO_MENU)
     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
   #endif
@@ -901,25 +911,21 @@
 #endif // HAS_LCD_MENU
 
 // Scroll a longer status message into view
-#define STATUS_MESSAGE_SCROLLING
-
-// On the Info Screen, display XY with one decimal place when possible
-#define LCD_DECIMAL_SMALL_XY
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define STATUS_MESSAGE_SCROLLING
 
+  // On the Info Screen, display XY with one decimal place when possible
+  #define LCD_DECIMAL_SMALL_XY
+#endif
 // The timeout (in ms) to return to the status screen from sub-menus
 #define LCD_TIMEOUT_TO_STATUS 15000
 
 // Add an 'M73' G-code to set the current percentage
-#define LCD_SET_PROGRESS_MANUALLY
-
-#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
-  //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
-  //#define SHOW_REMAINING_TIME          // Display estimated time to completion
-  //#define ROTATE_PROGRESS_DISPLAY      // Display (P)rogress, (E)lapsed, and (R)emaining time
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define LCD_SET_PROGRESS_MANUALLY
 #endif
-
 #if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
-  //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
+  #define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
   #if ENABLED(LCD_PROGRESS_BAR)
     #define PROGRESS_BAR_BAR_TIME 2000    // (ms) Amount of time to show the bar
     #define PROGRESS_BAR_MSG_TIME 3000    // (ms) Amount of time to show the status message
@@ -936,20 +942,22 @@
   // as SD_DETECT_PIN in your board's pins definitions.
   // This setting should be disabled unless you are using a push button, pulling the pin to ground.
   // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
-  #define SD_DETECT_INVERTED
-
+  #if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max)
+    #define SD_DETECT_INVERTED
+  #endif
   #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
   #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
 
   // Reverse SD sort to show "more recent" files first, according to the card's FAT.
   // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
-  #define SDCARD_RATHERRECENTFIRST
+  #if NONE(MachineCR10Orig, LowMemoryBoard)
+    #define SDCARD_RATHERRECENTFIRST
+    #define SD_MENU_CONFIRM_START             // Confirm the selected SD file before printing
 
-  #define SD_MENU_CONFIRM_START             // Confirm the selected SD file before printing
+    //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
 
-  //#define MENU_ADDAUTOSTART               // Add a menu option to run auto#.g files
-
-  #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+    #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
+  #endif
 
   /**
    * Continue after Power-Loss (Creality3D)
@@ -1010,11 +1018,12 @@
                                       // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
   #endif
 
-  // This allows hosts to request long names for files and folders with M33
-  #define LONG_FILENAME_HOST_SUPPORT
-
   // Enable this option to scroll long filenames in the SD card menu
-  #define SCROLL_LONG_FILENAMES
+  #if NONE(MachineCR10Orig, LowMemoryBoard)
+    // This allows hosts to request long names for files and folders with M33
+    #define LONG_FILENAME_HOST_SUPPORT
+    #define SCROLL_LONG_FILENAMES
+  #endif
 
   // Leave the heaters on after Stop Print (not recommended!)
   //#define SD_ABORT_NO_COOLDOWN
@@ -1036,7 +1045,9 @@
   /**
    * Auto-report SdCard status with M27 S<seconds>
    */
-  #define AUTO_REPORT_SD_STATUS
+  #if NONE(MachineCR10Orig, LowMemoryBoard)
+    #define AUTO_REPORT_SD_STATUS
+  #endif
 
   /**
    * Support for USB thumb drives using an Arduino USB Host Shield or
@@ -1160,7 +1171,9 @@
    * This will prevent position updates from being displayed.
    */
   #if ENABLED(U8GLIB_ST7920)
-    //#define LIGHTWEIGHT_UI
+    #if ENABLED(Big_UI)
+      #define LIGHTWEIGHT_UI
+    #endif
     #if ENABLED(LIGHTWEIGHT_UI)
       #define STATUS_EXPIRE_SECONDS 20
     #endif
@@ -1174,22 +1187,26 @@
   //#define STATUS_COMBINE_HEATERS    // Use combined heater images instead of separate ones
   //#define STATUS_HOTEND_NUMBERLESS  // Use plain hotend icons instead of numbered ones (with 2+ hotends)
   #define STATUS_HOTEND_INVERTED      // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
-  #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
-  #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
+  #if NONE(MachineCR10Orig, LowMemoryBoard)
+    #define STATUS_HOTEND_ANIM          // Use a second bitmap to indicate hotend heating
+    #define STATUS_BED_ANIM             // Use a second bitmap to indicate bed heating
+  #endif
   #define STATUS_CHAMBER_ANIM         // Use a second bitmap to indicate chamber heating
   //#define STATUS_ALT_BED_BITMAP     // Use the alternative bed bitmap
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
-  #define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
+  //#define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
   //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
-
-  // Frivolous Game Options
-  //#define MARLIN_BRICKOUT
-  //#define MARLIN_INVADERS
-  //#define MARLIN_SNAKE
+  #define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
   //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
+  #if ENABLED(SKR13)
+    // Frivolous Game Options
+    #define MARLIN_BRICKOUT
+    #define MARLIN_INVADERS
+    #define MARLIN_SNAKE
+  #endif
 #endif // HAS_GRAPHICAL_LCD
 
 //
@@ -1315,9 +1332,9 @@
 #define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define BABYSTEP_WITHOUT_HOMING
-  #define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
+  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
-  #define BABYSTEP_MULTIPLICATOR  20         // Babysteps are very small. Increase for faster motion.
+  #define BABYSTEP_MULTIPLICATOR 10         // Babysteps are very small. Increase for faster motion.
 
   #define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
@@ -1330,12 +1347,18 @@
     #endif
   #endif
 
-  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #if ENABLED(EXTENSIBLE_UI)
+    #define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #endif
 
-  #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  #if ANY(ABL_EZABL, ABL_BLTOUCH, ABL_NCSW)
+    #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  #endif
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
-    #define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    #define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
+    #if NONE(MachineCR10Orig, LowMemoryBoard, EXTENSIBLE_UI)
+      #define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
+    #endif
   #endif
 #endif
 
@@ -1357,7 +1380,7 @@
  * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
  * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
-#if DISABLED(E_2208) || ENABLED(E_Spreadcycle)
+#if NONE(MachineCR10Orig, LowMemoryBoard, MachineCR10SPro, MachineCR10Max, SKR13, MachineCR10SV2) || ENABLED(OrigLA) || ENABLED(SKR13, SKR13_UART)
   #define LIN_ADVANCE
 #endif
 #if ENABLED(LIN_ADVANCE)
@@ -1400,23 +1423,25 @@
 #if PROBE_SELECTED && !IS_KINEMATIC
   //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
   //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
+  #define MIN_PROBE_EDGE_FRONT (MIN_PROBE_EDGE + ClipClearance)
+  #define MIN_PROBE_EDGE_BACK (MIN_PROBE_EDGE + ClipClearance)
 #endif
 
 #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
-  #define MESH_MIN_X X_MIN_POS + MESH_INSET
-  #define MESH_MIN_Y Y_MIN_POS + MESH_INSET
-  #define MESH_MAX_X X_MAX_POS - MESH_INSET
-  #define MESH_MAX_Y Y_MAX_POS - MESH_INSET
+  //#define MESH_MIN_X MESH_INSET
+  //#define MESH_MIN_Y MESH_INSET
+  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
 #endif
 
 /**
  * Repeatedly attempt G29 leveling until it succeeds.
  * Stop after G29_MAX_RETRIES attempts.
  */
-//#define G29_RETRY_AND_RECOVER
+#if ENABLED(ABL_BI) && NONE(MachineCR10Orig, LowMemoryBoard)
+  #define G29_RETRY_AND_RECOVER
+#endif
 #if ENABLED(G29_RETRY_AND_RECOVER)
   #define G29_MAX_RETRIES 3
   #define G29_HALT_ON_FAILURE
@@ -1425,7 +1450,7 @@
    * between attempts, and after the maximum number of retries have been tried.
    */
   #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
-  #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
+  #define G29_RECOVER_COMMANDS "M117 Probe failed.\nG28\n"
   #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
 
 #endif
@@ -1435,7 +1460,9 @@
 //
 // G2/G3 Arc Support
 //
-#define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
+#if DISABLED(MachineCR10Orig)
+  #define ARC_SUPPORT               // Disable this feature to save ~3226 bytes
+#endif
 #if ENABLED(ARC_SUPPORT)
   #define MM_PER_ARC_SEGMENT  1   // Length of each arc segment
   #define MIN_ARC_SEGMENTS   24   // Minimum number of segments in a complete circle
@@ -1445,7 +1472,7 @@
 #endif
 
 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
-#define BEZIER_CURVE_SUPPORT
+//#define BEZIER_CURVE_SUPPORT
 
 /**
  * G38 Probe Target
@@ -1490,8 +1517,9 @@
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-//#define MINIMUM_STEPPER_PULSE 2
-
+#if ENABLED(SKR13)
+  #define MINIMUM_STEPPER_PULSE 1
+#endif
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
@@ -1520,7 +1548,11 @@
 // The number of linear motions that can be in the plan at any give time.
 // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
 #if ENABLED(SDSUPPORT)
-  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+  #if(ENABLED(MachineCR10Orig) || ENABLED(LowMemoryBoard))
+    #define BLOCK_BUFFER_SIZE 4 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+  #else
+    #define BLOCK_BUFFER_SIZE 16
+  #endif
 #else
   #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
 #endif
@@ -1529,8 +1561,11 @@
 
 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 96
+#if(ENABLED(MachineCR10Orig) || ENABLED(LowMemoryBoard))
+#define BUFSIZE 2
+#else
 #define BUFSIZE 4
-
+#endif
 // Transmission to Host Buffer Size
 // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
 // To buffer a simple "ok" you need 4 bytes.
@@ -1575,10 +1610,14 @@
 // Therefore some clients abort after 30 seconds in a timeout.
 // Some other clients start sending commands while receiving a 'wait'.
 // This "wait" is only sent when the buffer is empty. 1 second is a good value here.
-//#define NO_TIMEOUTS 1000 // Milliseconds
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define NO_TIMEOUTS 1000 // Milliseconds
+#endif
 
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
-#define ADVANCED_OK
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define ADVANCED_OK
+#endif
 
 // Printrun may have trouble receiving long strings all at once.
 // This option inserts short delays between lines of serial output.
@@ -1610,7 +1649,7 @@
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  *
  */
-#if ENABLED(ABL_Bilinear)
+ #if ENABLED(SKR13)
   #define FWRETRACT
 #endif
 #if ENABLED(FWRETRACT)
@@ -1638,13 +1677,13 @@
  */
 #if EXTRUDERS > 1
   // Z raise distance for tool-change, as needed for some extruders
-  #define TOOLCHANGE_ZRAISE     1  // (mm)
-  #define TOOLCHANGE_NO_RETURN   // Don't return to the previous position on tool-change
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+  #define TOOLCHANGE_NO_RETURN   // Never return to the previous position on tool-change
 
   // Retract and prime filament on tool-change
   #define TOOLCHANGE_FILAMENT_SWAP
   #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
-    #define TOOLCHANGE_FIL_SWAP_LENGTH          4  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_LENGTH          80  // (mm)
     #define TOOLCHANGE_FIL_EXTRA_PRIME           2  // (mm)
     #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3000  // (mm/m)
     #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3000  // (mm/m)
@@ -1654,9 +1693,9 @@
    * Position to park head during tool change.
    * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
    */
-  //#define TOOLCHANGE_PARK
+  #define TOOLCHANGE_PARK
   #if ENABLED(TOOLCHANGE_PARK)
-    #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
+    #define TOOLCHANGE_PARK_XY    { X_MAX_POS - 5, Y_MIN_POS + 10 }
     #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
   #endif
 #endif
@@ -1678,7 +1717,11 @@
                                                   // This short retract is done immediately, before parking the nozzle.
   #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     41  // (mm/s) Unload filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH      70  // (mm) The length of filament for a complete unload.
+  #if ENABLED(DirectDrive)
+    #define FILAMENT_CHANGE_UNLOAD_LENGTH      125
+  #else
+    #define FILAMENT_CHANGE_UNLOAD_LENGTH      430  // (mm) The length of filament for a complete unload.
+  #endif
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
                                                   //   Set to 0 for manual unloading.
@@ -1687,7 +1730,14 @@
                                                   // 0 to disable start loading and skip to fast load only
   #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE  30  // (mm/s) Load filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH    50  // (mm) Load length of filament, from extruder gear to nozzle.
+
+  #if ENABLED(DirectDrive)
+    #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   100
+  #elif(ENABLED(MachineCRX))
+    #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   450  // (mm) Load length of filament, from extruder gear to nozzle.
+  #else
+    #define FILAMENT_CHANGE_FAST_LOAD_LENGTH   430  // (mm) Load length of filament, from extruder gear to nozzle.
+  #endif
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
   //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
@@ -1696,22 +1746,23 @@
                                                   //   Set to 0 for manual extrusion.
                                                   //   Filament can be extruded repeatedly from the Filament Change menu
                                                   //   until extrusion is consistent, and to purge old filament.
-  #define ADVANCED_PAUSE_RESUME_PRIME          2  // (mm) Extra distance to prime nozzle after returning from park.
+  #define ADVANCED_PAUSE_RESUME_PRIME          0  // (mm) Extra distance to prime nozzle after returning from park.
   #define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
 
                                                   // Filament Unload does a Retract, Delay, and Purge first:
   #define FILAMENT_UNLOAD_RETRACT_LENGTH       4  // (mm) Unload initial retract length.
-  #define FILAMENT_UNLOAD_DELAY             2000  // (ms) Delay for the filament to cool after retract.
+  #define FILAMENT_UNLOAD_DELAY             5000  // (ms) Delay for the filament to cool after retract.
   #define FILAMENT_UNLOAD_PURGE_LENGTH         0  // (mm) An unretract is done, then this length is purged.
   #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
-  #define FILAMENT_CHANGE_ALERT_BEEPS          1  // Number of alert beeps to play when a response is needed.
+  #define FILAMENT_CHANGE_ALERT_BEEPS          2  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
   #define PARK_HEAD_ON_PAUSE                      // Park the nozzle during pause and filament change.
   #define HOME_BEFORE_FILAMENT_CHANGE             // Ensure homing has been completed prior to parking for filament change
-
-  #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
-  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+  #if NONE(MachineCR10Orig, MachineEnder4, EXTENSIBLE_UI)
+    #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+    #define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+  #endif
 #endif
 
 // @section tmc
@@ -2031,7 +2082,7 @@
    * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
    * M913 X/Y/Z/E to live tune the setting
    */
-  //#define HYBRID_THRESHOLD
+  #define HYBRID_THRESHOLD
 
   #define X_HYBRID_THRESHOLD     100  // [mm/s]
   #define X2_HYBRID_THRESHOLD    100
@@ -2069,8 +2120,6 @@
    *
    * IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
    * homing and adds a guard period for endstop triggering.
-   *
-   * TMC2209 requires STEALTHCHOP enabled for SENSORLESS_HOMING
    */
   //#define SENSORLESS_HOMING // StallGuard capable drivers only
 
@@ -2344,16 +2393,14 @@
  *
  * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
  */
-
-#if ENABLED(TREX3)
-  #define LASER_FEATURE
-#endif
+//#define SPINDLE_FEATURE
+//#define LASER_FEATURE
 #if EITHER(SPINDLE_FEATURE, LASER_FEATURE)
-  #define SPINDLE_LASER_ACTIVE_HIGH     true  // Set to "true" if the on/off function is active HIGH
-  #define SPINDLE_LASER_PWM             false   // Set to "true" if your controller supports setting the speed/power
+  #define SPINDLE_LASER_ACTIVE_HIGH     false  // Set to "true" if the on/off function is active HIGH
+  #define SPINDLE_LASER_PWM             true   // Set to "true" if your controller supports setting the speed/power
   #define SPINDLE_LASER_PWM_INVERT      true   // Set to "true" if the speed/power goes up when you want it to go slower
-  #define SPINDLE_LASER_POWERUP_DELAY   1   // (ms) Delay to allow the spindle/laser to come up to speed/power
-  #define SPINDLE_LASER_POWERDOWN_DELAY 1   // (ms) Delay to allow the spindle to stop
+  #define SPINDLE_LASER_POWERUP_DELAY   5000   // (ms) Delay to allow the spindle/laser to come up to speed/power
+  #define SPINDLE_LASER_POWERDOWN_DELAY 5000   // (ms) Delay to allow the spindle to stop
 
   #if ENABLED(SPINDLE_FEATURE)
     //#define SPINDLE_CHANGE_DIR               // Enable if your spindle controller can change spindle direction
@@ -2439,13 +2486,15 @@
 /**
  * Auto-report temperatures with M155 S<seconds>
  */
-#define AUTO_REPORT_TEMPERATURES
-
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define AUTO_REPORT_TEMPERATURES
+#endif
 /**
  * Include capabilities in M115 output
  */
-#define EXTENDED_CAPABILITIES_REPORT
-
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define EXTENDED_CAPABILITIES_REPORT
+#endif
 /**
  * Expected Printer Check
  * Add the M16 G-code to compare a string to the MACHINE_NAME.
@@ -2490,7 +2539,9 @@
 /**
  * Spend 28 bytes of SRAM to optimize the GCode parser
  */
-#define FASTER_GCODE_PARSER
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define FASTER_GCODE_PARSER
+#endif
 
 /**
  * CNC G-code options
@@ -2529,37 +2580,39 @@
 /**
  * User-defined menu items that execute custom GCode
  */
-#define CUSTOM_USER_MENUS
+#if ANY(ABL_UBL, ABL_BI) && NONE(MachineCR10Orig, LowMemoryBoard)
+  #define CUSTOM_USER_MENUS
+#endif
+
 #if ENABLED(CUSTOM_USER_MENUS)
   //#define USER_SCRIPT_DONE "M117 User Script Done"
-  #define CUSTOM_USER_MENU_TITLE "Setup"
   #define USER_SCRIPT_AUDIBLE_FEEDBACK
   #define USER_SCRIPT_RETURN  // Return to status screen after a script
+  #define CUSTOM_USER_MENU_TITLE "Leveling Tools"
 
-  #if ENABLED(TREX3)
-    #define COMMFANNSPEED " "
-  #else
-    #define COMMFANNSPEED  "M106 S128 \n"
+#if ENABLED(BedDC)
+  #define CommBedTmp "55"
+#else
+  #define CommBedTmp "75"
+#endif
+  #define USER_DESC_1 "Setup"
+  #if (ENABLED(ABL_UBL))
+    #define USER_GCODE_1 "M190S" CommBedTmp "\nG28\nG29P1\nG29P3\nG29S1\nG29S0\nG29F0.0\nG29A\nM104S215\nG28\nM109S215\nG1X150Y150F5000\nG1Z0\nM500\nM400\nM117 Set Z Offset"
+  #elif ENABLED(ABL_BI)
+    #define USER_GCODE_1 "M190S" CommBedTmp "\nG28\nG29\nM400\nM104S215\nG28\nM109S215\nM420S1\nG1X100Y100F5000\nG1Z0\nM500\nM117 Set Z Offset"
   #endif
 
-  #define USER_DESC_1 "Mesh Setup"
-  #define USER_DESC_3 "Prep for Z Adjust"
-  #if ENABLED(ABL_Bilinear)
-    #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S75 \n G28 \n G29 \n M500 \n G28 \n M420 S1 \n " COMMFANNSPEED " M109 S225 \n G1 X100 Y 100 \n G1 Z0 \n M77 \n M117 Set Z Offset"
-    #define USER_GCODE_3 "M190 S75 \n " COMMFANNSPEED " M104 235 \n G28 \n M420 S1 \n G1 X100 Y 100 \n G1 Z0"
-  #else
-    #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S75 \n G28 \n G29 P1 \n G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n " COMMFANNSPEED " M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M77 \n M117 Set Z Offset"
-    #define USER_GCODE_3 "M190 S75 \n " COMMFANNSPEED " M104 235 \n G28 \n G29 L1 \n G1 X100 Y 100 \n G1 Z0"
-  #endif
+    #define USER_DESC_2 "PID Tune"
+    #define USER_GCODE_2 "M106S128\nM303C8S215E0U\nM500\nM117 PID Tune Done"
 
-  #define USER_DESC_4 "Fill Mesh Points"
-  #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T"
+    #define USER_DESC_3 "Prep for Z Adjust"
+    #define USER_GCODE_3 "M190S" CommBedTmp "\nM104S215\nG28\nG29L1\nG1 X100Y100F5000\nG1Z0"
 
-  #define USER_DESC_2 "PID Bed"
-  #define USER_GCODE_2 "M303 C4 S75 E-1 U \n M500 \n M117 PID Tune Done"
+    #define USER_DESC_4 "Store Settings"
+    #define USER_GCODE_4 "M500\nM117 Settings Stored"
 
-  #define USER_DESC_5 "Run Mesh Validation"
-  #define USER_GCODE_5 "G26"
+  //#define USER_DESC_5 "Run Mesh Validation"
+  //#define USER_GCODE_5 "G26"
 #endif
 
 /**
@@ -2578,16 +2631,11 @@
  */
 #define HOST_ACTION_COMMANDS
 #if ENABLED(HOST_ACTION_COMMANDS)
-  #define HOST_PROMPT_SUPPORT
+  #if DISABLED(MachineCR10Orig)
+    #define HOST_PROMPT_SUPPORT
+  #endif
 #endif
 
-/**
- * Cancel Objects
- *
- * Implement M486 to allow Marlin to skip objects
- */
-#define CANCEL_OBJECTS
-
 /**
  * I2C position encoders for closed loop control.
  * Developed by Chris Barr at Aus3D.
@@ -2813,7 +2861,8 @@
 /**
  * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
  */
-//#define PINS_DEBUGGING
-
+#if NONE(MachineCR10Orig, LowMemoryBoard)
+  #define PINS_DEBUGGING
+#endif
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE

Marlin/Version.h

@@ -1,76 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-////////////////////////////
-// VENDOR VERSION EXAMPLE //
-////////////////////////////
-
-/**
- * Marlin release version identifier
- */
-#define SHORT_BUILD_VERSION "2.0.x_TR20"
-
-/**
- * Verbose version identifier which should contain a reference to the location
- * from where the binary was downloaded or the source code was compiled.
- */
-#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
-
-/**
- * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
- * here we define this default string as the date where the latest release
- * version was tagged.
- */
-#define STRING_DISTRIBUTION_DATE "2019-10-26"
-
-/**
- * Defines a generic printer name to be output to the LCD after booting Marlin.
- */
-#define MACHINE_NAME "TM3D Trex"
-
-/**
- * The SOURCE_CODE_URL is the location where users will find the Marlin Source
- * Code which is installed on the device. In most cases —unless the manufacturer
- * has a distinct Github fork— the Source Code URL should just be the main
- * Marlin repository.
- */
-#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/TM_Trex2+_2.0.x"
-
-/**
- * Default generic printer UUID.
- */
-//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
-
-/**
- * The WEBSITE_URL is the location where users can get more information such as
- * documentation about a specific Marlin release.
- */
-#define WEBSITE_URL "tinymachines3d.com"
-
-/**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
- */
-//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/lib/readme.txt

@@ -0,0 +1,36 @@
+
+This directory is intended for the project specific (private) libraries.
+PlatformIO will compile them to static libraries and link to executable file.
+
+The source code of each library should be placed in separate directory, like
+"lib/private_lib/[here are source files]".
+
+For example, see how can be organized `Foo` and `Bar` libraries:
+
+|--lib
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |- readme.txt --> THIS FILE
+|- platformio.ini
+|--src
+   |- main.c
+
+Then in `src/main.c` you should use:
+
+#include <Foo.h>
+#include <Bar.h>
+
+// rest H/C/CPP code
+
+PlatformIO will find your libraries automatically, configure preprocessor's
+include paths and build them.
+
+More information about PlatformIO Library Dependency Finder
+- http://docs.platformio.org/page/librarymanager/ldf.html

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -38,14 +38,6 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 
-#ifndef pgm_read_ptr
-  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
-  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
-  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long)) 
-  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
-  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
-#endif
-
 // ------------------------
 // Defines
 // ------------------------

Marlin/src/HAL/HAL_AVR/fast_pwm.cpp

@@ -23,7 +23,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
+#if ENABLED(FAST_PWM_FAN)
 
 #include "HAL.h"
 
@@ -278,5 +278,5 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
   }
 }
 
-#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
+#endif // FAST_PWM_FAN
 #endif // __AVR__

Marlin/src/HAL/HAL_DUE/HAL.h

@@ -38,39 +38,22 @@
 
 #include <stdint.h>
 
-// Define MYSERIAL0/1 before MarlinSerial includes!
-#if SERIAL_PORT == -1
-  #define MYSERIAL0 customizedSerial1
-#elif SERIAL_PORT == 0
-  #define MYSERIAL0 Serial
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
-#else
-  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
+// Serial ports
+#if !WITHIN(SERIAL_PORT, -1, 3)
+  #error "SERIAL_PORT must be from -1 to 3"
 #endif
 
+// MYSERIAL0 required before MarlinSerial includes!
+#define MYSERIAL0 customizedSerial1
+
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #endif
-  #if SERIAL_PORT_2 == -1
-    #define MYSERIAL1 customizedSerial2
-  #elif SERIAL_PORT_2 == 0
-    #define MYSERIAL1 Serial
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 Serial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 Serial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 Serial3
-  #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+  #if !WITHIN(SERIAL_PORT_2, -1, 3)
+    #error "SERIAL_PORT_2 must be from -1 to 3"
+  #elif SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
   #endif
   #define NUM_SERIAL 2
+  #define MYSERIAL1 customizedSerial2
 #else
   #define NUM_SERIAL 1
 #endif

Marlin/src/HAL/HAL_DUE/usb/conf_usb.h

@@ -48,7 +48,9 @@
 #define _CONF_USB_H_
 
 #undef UNUSED                           /* To avoid a macro clash as macros.h already defines it */
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../../core/macros.h"       /* For ENABLED()/DISABLED() */
+#include "../../../core/boards.h"       /* For MB() */
+#include "../../../../Configuration.h"  /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
 #include "compiler.h"
 
 /**
@@ -57,6 +59,8 @@
  */
 
 //! Device definition (mandatory)
+#define  USB_DEVICE_VENDOR_ID             0x03EB /* ATMEL VID */
+#define  USB_DEVICE_PRODUCT_ID            0x2424 /* MSC / CDC */
 #define  USB_DEVICE_MAJOR_VERSION         1
 #define  USB_DEVICE_MINOR_VERSION         0
 #define  USB_DEVICE_POWER                 100 // Consumption on Vbus line (mA)
@@ -66,6 +70,15 @@
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
 
+//! USB Device string definitions (Optional)
+#define  USB_DEVICE_MANUFACTURE_NAME      "marlinfw.org"
+#ifdef CUSTOM_MACHINE_NAME
+  #define  USB_DEVICE_PRODUCT_NAME        CUSTOM_MACHINE_NAME
+#else
+  #define  USB_DEVICE_PRODUCT_NAME        "3D Printer"
+#endif
+#define  USB_DEVICE_SERIAL_NAME           "123985739853"
+
 /**
  * Device speeds support
  * Low speed not supported by CDC and MSC

Marlin/src/HAL/HAL_ESP32/HAL.cpp

@@ -187,21 +187,19 @@ void HAL_adc_start_conversion(uint8_t adc_pin) {
   const adc1_channel_t chan = get_channel(adc_pin);
   uint32_t mv;
   esp_adc_cal_get_voltage((adc_channel_t)chan, &characteristics[attenuations[chan]], &mv);
-  HAL_adc_result = mv * 1023.0 / 3300.0;
 
   // Change the attenuation level based on the new reading
   adc_atten_t atten;
   if (mv < thresholds[ADC_ATTEN_DB_0] - 100)
-    atten = ADC_ATTEN_DB_0;
+    adc1_set_attenuation(chan, ADC_ATTEN_DB_0);
   else if (mv > thresholds[ADC_ATTEN_DB_0] - 50 && mv < thresholds[ADC_ATTEN_DB_2_5] - 100)
-    atten = ADC_ATTEN_DB_2_5;
+    adc1_set_attenuation(chan, ADC_ATTEN_DB_2_5);
   else if (mv > thresholds[ADC_ATTEN_DB_2_5] - 50 && mv < thresholds[ADC_ATTEN_DB_6] - 100)
-    atten = ADC_ATTEN_DB_6;
+    adc1_set_attenuation(chan, ADC_ATTEN_DB_6);
   else if (mv > thresholds[ADC_ATTEN_DB_6] - 50)
-    atten = ADC_ATTEN_DB_11;
-  else return;
+    adc1_set_attenuation(chan, ADC_ATTEN_DB_11);
 
-  adc1_set_attenuation(chan, atten);
+  HAL_adc_result = mv * 1023.0 / 3300.0;
 }
 
 void analogWrite(pin_t pin, int value) {

Marlin/src/HAL/HAL_LPC1768/fast_pwm.cpp

@@ -24,7 +24,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
+#if ENABLED(FAST_PWM_FAN)
 
 #include <pwm.h>
 
@@ -36,5 +36,5 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
   pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);
 }
 
-#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
+#endif // FAST_PWM_FAN
 #endif // TARGET_LPC1768

Marlin/src/HAL/HAL_LPC1768/upload_extra_script.py

@@ -31,11 +31,9 @@ try:
         #
         import subprocess
         # typical result (string): 'Drives: C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
-        driveStr = str(subprocess.check_output("fsutil fsinfo drives"))
+        driveStr = subprocess.check_output("fsutil fsinfo drives")
         # typical result (string): 'C:\ D:\ E:\ F:\ G:\ H:\ I:\ J:\ K:\ L:\ M:\ Y:\ Z:\'
-        # driveStr = driveStr.strip().lstrip('Drives: ') <- Doesn't work in other Languages as English. In German is "Drives:" = "Laufwerke:"
-        FirstFound = driveStr.find(':',0,-1)         # Find the first ":" and
-        driveStr = driveStr[FirstFound + 1 : -1]     # truncate to the rest
+        driveStr = driveStr.strip().lstrip('Drives: ')
         # typical result (array of stings): ['C:\\', 'D:\\', 'E:\\', 'F:\\',
         # 'G:\\', 'H:\\', 'I:\\', 'J:\\', 'K:\\', 'L:\\', 'M:\\', 'Y:\\', 'Z:\\']
         drives = driveStr.split()
@@ -46,7 +44,7 @@ try:
         for drive in drives:
             final_drive_name = drive.strip().rstrip('\\')   # typical result (string): 'C:'
             try:
-                volume_info = str(subprocess.check_output('cmd /C dir ' + final_drive_name, stderr=subprocess.STDOUT))
+                volume_info = subprocess.check_output('cmd /C dir ' + final_drive_name, stderr=subprocess.STDOUT)
             except Exception as e:
                 continue
             else:

Marlin/src/HAL/HAL_STM32F1/HAL.cpp

@@ -27,8 +27,8 @@
 
 #ifdef __STM32F1__
 
-#include "../../inc/MarlinConfig.h"
 #include "HAL.h"
+#include "../../inc/MarlinConfig.h"
 
 #include <STM32ADC.h>
 

Marlin/src/HAL/HAL_STM32F1/timers.cpp

@@ -26,8 +26,8 @@
 
 #ifdef __STM32F1__
 
-#include "../../inc/MarlinConfig.h"
 #include "HAL.h"
+
 #include "timers.h"
 
 // ------------------------

Marlin/src/HAL/HAL_STM32F1/timers.h

@@ -27,7 +27,6 @@
 
 #include <stdint.h>
 #include <libmaple/timer.h>
-#include "../../core/boards.h"
 
 // ------------------------
 // Defines
@@ -55,13 +54,7 @@ typedef uint16_t hal_timer_t;
 #define TEMP_TIMER_NUM 2    // index of timer to use for temperature
 //#define TEMP_TIMER_NUM 4  // 2->4, Timer 2 for Stepper Current PWM
 #define PULSE_TIMER_NUM STEP_TIMER_NUM
-
-#if MB(BIGTREE_SKR_MINI_E3, BIGTREE_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE)
-  // SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM.
-  #define SERVO0_TIMER_NUM 8
-#else
-  #define SERVO0_TIMER_NUM 1  // SERVO0 or BLTOUCH
-#endif
+#define SERVO0_TIMER_NUM 1  // SERVO0 or BLTOUCH
 
 #define STEP_TIMER_IRQ_PRIO 1
 #define TEMP_TIMER_IRQ_PRIO 2

Marlin/src/Marlin.cpp

@@ -145,10 +145,6 @@
   #include "feature/power_loss_recovery.h"
 #endif
 
-#if ENABLED(CANCEL_OBJECTS)
-  #include "feature/cancel_object.h"
-#endif
-
 #if HAS_FILAMENT_SENSOR
   #include "feature/runout.h"
 #endif
@@ -223,7 +219,7 @@ void setup_powerhold() {
   #if HAS_SUICIDE
     OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING);
   #endif
-  #if ENABLED(PSU_CONTROL)
+  #if HAS_POWER_SWITCH
     #if ENABLED(PS_DEFAULT_OFF)
       powersupply_on = true;  PSU_OFF();
     #else
@@ -279,10 +275,6 @@ void quickstop_stepper() {
   sync_plan_position();
 }
 
-void enable_e_steppers() {
-  enable_E0(); enable_E1(); enable_E2(); enable_E3(); enable_E4(); enable_E5();
-}
-
 void enable_all_steppers() {
   #if ENABLED(AUTO_POWER_CONTROL)
     powerManager.power_on();
@@ -290,11 +282,30 @@ void enable_all_steppers() {
   enable_X();
   enable_Y();
   enable_Z();
-  enable_e_steppers();
+  enable_E0();
+  enable_E1();
+  enable_E2();
+  enable_E3();
+  enable_E4();
+  enable_E5();
+}
+
+void enable_e_steppers() {
+  enable_E0();
+  enable_E1();
+  enable_E2();
+  enable_E3();
+  enable_E4();
+  enable_E5();
 }
 
 void disable_e_steppers() {
-  disable_E0(); disable_E1(); disable_E2(); disable_E3(); disable_E4(); disable_E5();
+  disable_E0();
+  disable_E1();
+  disable_E2();
+  disable_E3();
+  disable_E4();
+  disable_E5();
 }
 
 void disable_e_stepper(const uint8_t e) {
@@ -328,7 +339,7 @@ void disable_all_steppers() {
       #ifdef ACTION_ON_CANCEL
         host_action_cancel();
       #endif
-      kill(GET_TEXT(MSG_LCD_PROBING_FAILED));
+      kill(PSTR(MSG_ERR_PROBING_FAILED));
     #endif
   }
 
@@ -346,31 +357,18 @@ void disable_all_steppers() {
 
 #endif
 
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
-  #include "feature/pause.h"
-#else
-  constexpr bool did_pause_print = false;
-#endif
-
 /**
  * Printing is active when the print job timer is running
  */
 bool printingIsActive() {
-  return !did_pause_print && (print_job_timer.isRunning() || IS_SD_PRINTING());
+  return print_job_timer.isRunning() || IS_SD_PRINTING();
 }
 
 /**
  * Printing is paused according to SD or host indicators
  */
 bool printingIsPaused() {
-  return did_pause_print || print_job_timer.isPaused() || IS_SD_PAUSED();
-}
-
-void startOrResumeJob() {
-  #if ENABLED(CANCEL_OBJECTS)
-    if (!printingIsPaused()) cancelable.reset();
-  #endif
-  print_job_timer.start();
+  return print_job_timer.isPaused() || IS_SD_PAUSED();
 }
 
 /**
@@ -703,16 +701,15 @@ void idle(
  * Kill all activity and lock the machine.
  * After this the machine will need to be reset.
  */
-void kill(PGM_P const lcd_error/*=nullptr*/, PGM_P const lcd_component/*=nullptr*/, const bool steppers_off/*=false*/) {
+void kill(PGM_P const lcd_msg/*=nullptr*/, const bool steppers_off/*=false*/) {
   thermalManager.disable_all_heaters();
 
   SERIAL_ERROR_MSG(MSG_ERR_KILLED);
 
   #if HAS_DISPLAY
-    ui.kill_screen(lcd_error ?: GET_TEXT(MSG_KILLED), lcd_component);
+    ui.kill_screen(lcd_msg ?: PSTR(MSG_KILLED));
   #else
-    UNUSED(lcd_error);
-    UNUSED(lcd_component);
+    UNUSED(lcd_msg);
   #endif
 
   #ifdef ACTION_ON_KILL
@@ -738,7 +735,7 @@ void minkill(const bool steppers_off/*=false*/) {
   // Power off all steppers (for M112) or just the E steppers
   steppers_off ? disable_all_steppers() : disable_e_steppers();
 
-  #if ENABLED(PSU_CONTROL)
+  #if HAS_POWER_SWITCH
     PSU_OFF();
   #endif
 
@@ -918,6 +915,8 @@ void setup() {
   #endif
 
   ui.init();
+  ui.reset_status();
+
   #if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN)
     ui.show_bootscreen();
   #endif
@@ -946,8 +945,6 @@ void setup() {
 
   print_job_timer.init();   // Initial setup of print job timer
 
-  ui.reset_status();        // Print startup message after print statistics are loaded
-
   endstops.init();          // Init endstops and pullups
 
   stepper.init();           // Init stepper. This enables interrupts!

Marlin/src/Marlin.h

@@ -322,7 +322,7 @@ void disable_e_stepper(const uint8_t e);
 void disable_e_steppers();
 void disable_all_steppers();
 
-void kill(PGM_P const lcd_error=nullptr, PGM_P const lcd_component=nullptr, const bool steppers_off=false);
+void kill(PGM_P const lcd_msg=nullptr, const bool steppers_off=false);
 void minkill(const bool steppers_off=false);
 
 void quickstop_stepper();
@@ -333,7 +333,6 @@ inline bool IsStopped() { return !Running; }
 
 bool printingIsActive();
 bool printingIsPaused();
-void startOrResumeJob();
 
 extern bool wait_for_heatup;
 
@@ -352,7 +351,7 @@ extern millis_t max_inactive_time, stepper_inactive_time;
   extern uint8_t controllerfan_speed;
 #endif
 
-#if ENABLED(PSU_CONTROL)
+#if HAS_POWER_SWITCH
   extern bool powersupply_on;
   #define PSU_PIN_ON()  do{ OUT_WRITE(PS_ON_PIN,  PSU_ACTIVE_HIGH); powersupply_on = true; }while(0)
   #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_HIGH); powersupply_on = false; }while(0)

Marlin/src/core/boards.h

@@ -21,8 +21,6 @@
  */
 #pragma once
 
-#include "macros.h"
-
 #define BOARD_UNKNOWN -1
 
 //
@@ -270,12 +268,11 @@
 #define BOARD_BIGTREE_SKR_MINI_V1_1   4010  // BigTreeTech SKR Mini v1.1 (STM32F103RC)
 #define BOARD_BIGTREE_SKR_MINI_E3     4011  // BigTreeTech SKR Mini E3 (STM32F103RC)
 #define BOARD_BIGTREE_SKR_E3_DIP      4012  // BigTreeTech SKR E3 DIP V1.0 (STM32F103RC)
-#define BOARD_BTT_SKR_MINI_E3_V1_2    4013  // BigTreeTech SKR Mini E3 V1.2 (STM32F103RC)
-#define BOARD_JGAURORA_A5S_A1         4014  // JGAurora A5S A1 (STM32F103ZET6)
-#define BOARD_FYSETC_AIO_II           4015  // FYSETC AIO_II
-#define BOARD_FYSETC_CHEETAH          4016  // FYSETC Cheetah
-#define BOARD_FYSETC_CHEETAH_V12      4017  // FYSETC Cheetah V1.2
-#define BOARD_LONGER3D_LK             4018  // Alfawise U20/U20+/U30 (Longer3D LK1/2) / STM32F103VET6
+#define BOARD_JGAURORA_A5S_A1         4013  // JGAurora A5S A1 (STM32F103ZET6)
+#define BOARD_FYSETC_AIO_II           4014  // FYSETC AIO_II
+#define BOARD_FYSETC_CHEETAH          4015  // FYSETC Cheetah
+#define BOARD_FYSETC_CHEETAH_V12      4016  // FYSETC Cheetah V1.2
+#define BOARD_LONGER3D_LK             4017  // Alfawise U20/U20+/U30 (Longer3D LK1/2) / STM32F103VET6
 
 //
 // ARM Cortex-M4F
@@ -289,7 +286,7 @@
 //
 
 #define BOARD_BEAST                   4200  // STM32F4xxVxT6 Libmaple-based STM32F4 controller
-#define BOARD_GENERIC_STM32F4         4201  // STM32 STM32GENERIC-based STM32F4 controller
+#define BOARD_STM32F4                 4201  // STM32 STM32GENERIC-based STM32F4 controller
 #define BOARD_ARMED                   4202  // Arm'ed STM32F4-based controller
 #define BOARD_RUMBA32                 4203  // RUMBA32 STM32F4-based controller
 #define BOARD_BLACK_STM32F407VE       4204  // BLACK_STM32F407VE
@@ -310,7 +307,7 @@
 //
 // Espressif ESP32 WiFi
 //
-#define BOARD_ESPRESSIF_ESP32         6000
+#define BOARD_ESP32                   6000
 
 //
 // Simulations
@@ -318,7 +315,4 @@
 
 #define BOARD_LINUX_RAMPS             9999
 
-#define _MB_1(B)  (defined(BOARD_##B) && MOTHERBOARD==BOARD_##B)
-#define MB(V...)  DO(MB,||,V)
-
-#define IS_MELZI MB(MELZI, MELZI_CREALITY, MELZI_MAKR3D, MELZI_MALYAN, MELZI_TRONXY)
+#define MB(board) (defined(BOARD_##board) && MOTHERBOARD==BOARD_##board)

Marlin/src/core/language.h

@@ -49,7 +49,7 @@
 // da         Danish
 // de         German
 // el         Greek
-// el_gr      Greek (Greece)
+// el-gr      Greek (Greece)
 // en         English
 // es         Spanish
 // eu         Basque-Euskera
@@ -58,12 +58,12 @@
 // gl         Galician
 // hr         Croatian
 // it         Italian
-// jp_kana    Japanese
+// jp-kana    Japanese
 // ko_KR      Korean (South Korea)
 // nl         Dutch
 // pl         Polish
 // pt         Portuguese
-// pt_br      Portuguese (Brazilian)
+// pt-br      Portuguese (Brazilian)
 // ru         Russian
 // sk         Slovak
 // tr         Turkish
@@ -97,20 +97,7 @@
 //  #define STRING_SPLASH_LINE3 WEBSITE_URL
 //#endif
 
-#if HAS_CHARACTER_LCD
-
-  // Custom characters defined in the first 8 characters of the LCD
-  #define LCD_STR_BEDTEMP     "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!
-  #define LCD_STR_DEGREE      "\x01"
-  #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
-  #define LCD_STR_UPLEVEL     "\x03"
-  #define LCD_STR_REFRESH     "\x04"
-  #define LCD_STR_FOLDER      "\x05"
-  #define LCD_STR_FEEDRATE    "\x06"
-  #define LCD_STR_CLOCK       "\x07"
-  #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
-
-#else
+#if HAS_GRAPHICAL_LCD
   //
   // Custom characters from Marlin_symbols.fon which was merged into ISO10646-0-3.bdf
   // \x00 intentionally skipped to avoid problems in strings
@@ -133,6 +120,19 @@
   #define LCD_STR_FILAM_DIA   "\xF8"
   #define LCD_STR_FILAM_MUL   "\xA4"
 
+#elif HAS_CHARACTER_LCD
+
+  // Custom characters defined in the first 8 characters of the LCD
+  #define LCD_STR_BEDTEMP     "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!
+  #define LCD_STR_DEGREE      "\x01"
+  #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
+  #define LCD_STR_UPLEVEL     "\x03"
+  #define LCD_STR_REFRESH     "\x04"
+  #define LCD_STR_FOLDER      "\x05"
+  #define LCD_STR_FEEDRATE    "\x06"
+  #define LCD_STR_CLOCK       "\x07"
+  #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
+
 #endif
 
 // Common LCD messages
@@ -168,6 +168,7 @@
 #define MSG_INVALID_E_STEPPER               "Invalid E stepper"
 #define MSG_E_STEPPER_NOT_SPECIFIED         "E stepper not specified"
 #define MSG_INVALID_SOLENOID                "Invalid solenoid"
+#define MSG_ERR_NO_THERMISTORS              "No thermistors - no temperature"
 #define MSG_M115_REPORT                     "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID
 #define MSG_COUNT_X                         " Count X:"
 #define MSG_COUNT_A                         " Count A:"
@@ -242,9 +243,10 @@
 #define MSG_ERR_COLD_EXTRUDE_STOP           " cold extrusion prevented"
 #define MSG_ERR_LONG_EXTRUDE_STOP           " too long extrusion prevented"
 #define MSG_ERR_HOTEND_TOO_COLD             "Hotend too cold"
-#define MSG_ERR_Z_HOMING_SER                "Home XY first"
-#define MSG_ERR_EEPROM_WRITE                "Error writing to EEPROM!"
 
+#define MSG_FILAMENT_CHANGE_HEAT            "Press button (or M108) to heat nozzle"
+#define MSG_FILAMENT_CHANGE_INSERT          "Insert filament and press button (or M108)"
+#define MSG_FILAMENT_CHANGE_WAIT            "Press button (or M108) to resume"
 #define MSG_FILAMENT_CHANGE_HEAT_LCD        "Press button to heat nozzle"
 #define MSG_FILAMENT_CHANGE_INSERT_LCD      "Insert filament and press button"
 #define MSG_FILAMENT_CHANGE_WAIT_LCD        "Press button to resume"
@@ -252,6 +254,8 @@
 #define MSG_FILAMENT_CHANGE_INSERT_M108     "Insert filament and send M108"
 #define MSG_FILAMENT_CHANGE_WAIT_M108       "Send M108 to resume"
 
+#define MSG_ERR_EEPROM_WRITE                "Error writing to EEPROM!"
+
 #define MSG_STOP_BLTOUCH                    "STOP called because of BLTouch error - restart with M999"
 #define MSG_STOP_UNHOMED                    "STOP called because of unhomed error - restart with M999"
 #define MSG_KILL_INACTIVE_TIME              "KILL caused by too much inactive time - current command: "
@@ -294,8 +298,6 @@
 #define MSG_T_THERMAL_RUNAWAY               "Thermal Runaway"
 #define MSG_T_MAXTEMP                       "MAXTEMP triggered"
 #define MSG_T_MINTEMP                       "MINTEMP triggered"
-#define MSG_ERR_PROBING_FAILED              "Probing Failed"
-#define MSG_ZPROBE_OUT_SER                  "Z Probe Past Bed"
 
 // Debug
 #define MSG_DEBUG_PREFIX                    "DEBUG:"
@@ -311,9 +313,11 @@
 
 #define LANGUAGE_DATA_INCL_(M) STRINGIFY_(fontdata/langdata_##M.h)
 #define LANGUAGE_DATA_INCL(M) LANGUAGE_DATA_INCL_(M)
+#define INCLUDE_LANGUAGE_DATA LANGUAGE_DATA_INCL(LCD_LANGUAGE)
 
 #define LANGUAGE_INCL_(M) STRINGIFY_(../lcd/language/language_##M.h)
 #define LANGUAGE_INCL(M) LANGUAGE_INCL_(M)
+#define INCLUDE_LANGUAGE LANGUAGE_INCL(LCD_LANGUAGE)
 
 // Never translate these strings
 #define MSG_X "X"
@@ -333,52 +337,38 @@
 #define MSG_Y2 "Y2"
 #define MSG_Z2 "Z2"
 #define MSG_Z3 "Z3"
+#define MSG_H1 "1"
+#define MSG_H2 "2"
+#define MSG_H3 "3"
+#define MSG_H4 "4"
+#define MSG_H5 "5"
+#define MSG_H6 "6"
+#define MSG_LCD_N0 " 1"
+#define MSG_LCD_N1 " 2"
+#define MSG_LCD_N2 " 3"
+#define MSG_LCD_N3 " 4"
+#define MSG_LCD_N4 " 5"
+#define MSG_LCD_N5 " 6"
+#define MSG_E1 "E1"
+#define MSG_E2 "E2"
+#define MSG_E3 "E3"
+#define MSG_E4 "E4"
+#define MSG_E5 "E5"
+#define MSG_E6 "E6"
+#define MSG_MOVE_E1 "1"
+#define MSG_MOVE_E2 "2"
+#define MSG_MOVE_E3 "3"
+#define MSG_MOVE_E4 "4"
+#define MSG_MOVE_E5 "5"
+#define MSG_MOVE_E6 "6"
+#define MSG_DIAM_E1 " 1"
+#define MSG_DIAM_E2 " 2"
+#define MSG_DIAM_E3 " 3"
+#define MSG_DIAM_E4 " 4"
+#define MSG_DIAM_E5 " 5"
+#define MSG_DIAM_E6 " 6"
 
-#define LCD_STR_A MSG_A
-#define LCD_STR_B MSG_B
-#define LCD_STR_C MSG_C
-#define LCD_STR_E MSG_E
-
-/**
- * Tool indexes for LCD display only
- *
- * By convention the LCD shows "E1" for the first extruder.
- * However, internal to Marlin E0/T0 is the first tool, and
- * most board silkscreens say "E0." Zero-based labels will
- * make these indexes consistent but this defies expectation.
- *
- */
-#if ENABLED(NUMBER_TOOLS_FROM_0)
-  #define LCD_STR_N0 "0"
-  #define LCD_STR_N1 "1"
-  #define LCD_STR_N2 "2"
-  #define LCD_STR_N3 "3"
-  #define LCD_STR_N4 "4"
-  #define LCD_STR_N5 "5"
-#else
-  #define LCD_STR_N0 "1"
-  #define LCD_STR_N1 "2"
-  #define LCD_STR_N2 "3"
-  #define LCD_STR_N3 "4"
-  #define LCD_STR_N4 "5"
-  #define LCD_STR_N5 "6"
-#endif
-
-#define LCD_STR_E0 "E" LCD_STR_N0
-#define LCD_STR_E1 "E" LCD_STR_N1
-#define LCD_STR_E2 "E" LCD_STR_N2
-#define LCD_STR_E3 "E" LCD_STR_N3
-#define LCD_STR_E4 "E" LCD_STR_N4
-#define LCD_STR_E5 "E" LCD_STR_N5
-
-#include "multi_language.h"   // Allow multiple languages
-
-#include "../lcd/language/language_en.h"
-#include LANGUAGE_INCL(LCD_LANGUAGE)
-#include LANGUAGE_INCL(LCD_LANGUAGE_2)
-#include LANGUAGE_INCL(LCD_LANGUAGE_3)
-#include LANGUAGE_INCL(LCD_LANGUAGE_4)
-#include LANGUAGE_INCL(LCD_LANGUAGE_5)
+#include INCLUDE_LANGUAGE
 
 #if NONE(DISPLAY_CHARSET_ISO10646_1, \
          DISPLAY_CHARSET_ISO10646_5, \
@@ -391,3 +381,10 @@
          DISPLAY_CHARSET_ISO10646_SK)
   #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
 #endif
+
+#include "../lcd/language/language_en.h"
+
+#ifdef CUSTOM_USER_MENU_TITLE
+  #undef MSG_USER_MENU
+  #define MSG_USER_MENU CUSTOM_USER_MENU_TITLE
+#endif

Marlin/src/core/macros.h

@@ -21,6 +21,7 @@
  */
 #pragma once
 
+#define NUM_AXIS 4
 #define ABCE 4
 #define XYZE 4
 #define ABC  3
@@ -226,9 +227,6 @@
 #define LIST_N(N,V...) _LIST_N(N,V)
 #define ARRAY_N(N,V...) { _LIST_N(N,V) }
 
-#define _JOIN_1(O)         (O)
-#define JOIN_N(N,C,V...)   (DO(JOIN,C,LIST_N(N,V)))
-
 // Macros for adding
 #define INC_0 1
 #define INC_1 2
@@ -279,7 +277,7 @@
 #define ATAN2(y, x) atan2f(y, x)
 #define POW(x, y)   powf(x, y)
 #define SQRT(x)     sqrtf(x)
-#define RSQRT(x)    (1.0f / sqrtf(x))
+#define RSQRT(x)    (1 / sqrtf(x))
 #define CEIL(x)     ceilf(x)
 #define FLOOR(x)    floorf(x)
 #define LROUND(x)   lroundf(x)

Marlin/src/core/multi_language.h

@@ -1,79 +0,0 @@
-/********************
- * multi_language.h *
- ********************/
-
-/****************************************************************************
- *   Written By Marcio Teixeira 2019 - Aleph Objects, Inc.                  *
- *                                                                          *
- *   This program is free software: you can redistribute it and/or modify   *
- *   it under the terms of the GNU General Public License as published by   *
- *   the Free Software Foundation, either version 3 of the License, or      *
- *   (at your option) any later version.                                    *
- *                                                                          *
- *   This program is distributed in the hope that it will be useful,        *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of         *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the          *
- *   GNU General Public License for more details.                           *
- *                                                                          *
- *   To view a copy of the GNU General Public License, go to the following  *
- *   location: <http://www.gnu.org/licenses/>.                              *
- ****************************************************************************/
-#pragma once
-
-typedef const char Language_Str[];
-
-#if defined(LCD_LANGUAGE_5)
-  #define NUM_LANGUAGES 5
-#elif defined(LCD_LANGUAGE_4)
-  #define NUM_LANGUAGES 4
-#elif defined(LCD_LANGUAGE_3)
-  #define NUM_LANGUAGES 3
-#elif defined(LCD_LANGUAGE_2)
-  #define NUM_LANGUAGES 2
-#else
-  #define NUM_LANGUAGES 1
-#endif
-
-// Setting the unused languages equal to each other allows
-// the compiler to optimize away the conditionals
-
-#ifndef LCD_LANGUAGE_2
-  #define LCD_LANGUAGE_2 LCD_LANGUAGE
-#endif
-
-#ifndef LCD_LANGUAGE_3
-  #define LCD_LANGUAGE_3 LCD_LANGUAGE_2
-#endif
-
-#ifndef LCD_LANGUAGE_4
-  #define LCD_LANGUAGE_4 LCD_LANGUAGE_3
-#endif
-
-#ifndef LCD_LANGUAGE_5
-  #define LCD_LANGUAGE_5 LCD_LANGUAGE_4
-#endif
-
-#define _GET_LANG(LANG) Language_##LANG
-#define GET_LANG(LANG) _GET_LANG(LANG)
-
-#if NUM_LANGUAGES > 1
-  extern uint8_t lang;
-  #define GET_TEXT(MSG) ( \
-    lang == 0 ? GET_LANG(LCD_LANGUAGE)::MSG : \
-    lang == 1 ? GET_LANG(LCD_LANGUAGE_2)::MSG : \
-    lang == 2 ? GET_LANG(LCD_LANGUAGE_3)::MSG : \
-    lang == 3 ? GET_LANG(LCD_LANGUAGE_4)::MSG : \
-                GET_LANG(LCD_LANGUAGE_5)::MSG \
-    )
-  #define MAX_LANG_CHARSIZE _MAX(GET_LANG(LCD_LANGUAGE)::CHARSIZE, \
-                                GET_LANG(LCD_LANGUAGE_2)::CHARSIZE, \
-                                GET_LANG(LCD_LANGUAGE_3)::CHARSIZE, \
-                                GET_LANG(LCD_LANGUAGE_4)::CHARSIZE, \
-                                GET_LANG(LCD_LANGUAGE_5)::CHARSIZE)
-#else
-  #define GET_TEXT(MSG) GET_LANG(LCD_LANGUAGE)::MSG
-  #define MAX_LANG_CHARSIZE GET_LANG(LCD_LANGUAGE)::CHARSIZE
-#endif
-#define GET_TEXT_F(MSG) (const __FlashStringHelper*)GET_TEXT(MSG)
-
-#define MSG_CONCAT(A,B) pgm_p_pair_t(GET_TEXT(A),GET_TEXT(B))

Marlin/src/core/utility.h

@@ -47,9 +47,9 @@ inline void serial_delay(const millis_t ms) {
     void unmark(const uint8_t x, const uint8_t y) { CBI(bits[y], x); }
     void mark(const uint8_t x, const uint8_t y)   { SBI(bits[y], x); }
     bool marked(const uint8_t x, const uint8_t y) { return TEST(bits[y], x); }
-    inline void unmark(const xy_int8_t &xy)       { unmark(xy.x, xy.y); }
-    inline void mark(const xy_int8_t &xy)         { mark(xy.x, xy.y); }
-    inline bool marked(const xy_int8_t &xy)       { return marked(xy.x, xy.y); }
+    inline void unmark(const xy_int8_t &xy)       { unmark(xy.y, xy.x); }
+    inline void mark(const xy_int8_t &xy)         { mark(xy.y, xy.x); }
+    inline bool marked(const xy_int8_t &xy)       { return marked(xy.y, xy.x); }
   };
 
   typedef FlagBits<GRID_MAX_POINTS_X, GRID_MAX_POINTS_Y> MeshFlags;

Marlin/src/feature/backlash.cpp

@@ -123,7 +123,7 @@ void Backlash::add_correction_steps(const int32_t &da, const int32_t &db, const
 }
 
 #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
-  #if HAS_CUSTOM_PROBE_PIN
+  #if USES_Z_MIN_PROBE_ENDSTOP
     #define TEST_PROBE_PIN (READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING)
   #else
     #define TEST_PROBE_PIN (READ(Z_MIN_PIN) != Z_MIN_ENDSTOP_INVERTING)

Marlin/src/feature/bedlevel/bedlevel.cpp

@@ -228,14 +228,14 @@ void reset_bed_level() {
     #ifdef MANUAL_PROBE_START_Z
       constexpr float startz = _MAX(0, MANUAL_PROBE_START_Z);
       #if MANUAL_PROBE_HEIGHT > 0
-        do_blocking_move_to_xy_z(pos, MANUAL_PROBE_HEIGHT);
+        do_blocking_move_to(pos.x, pos.y, MANUAL_PROBE_HEIGHT);
         do_blocking_move_to_z(startz);
       #else
-        do_blocking_move_to_xy_z(pos, startz);
+        do_blocking_move_to(pos.x, pos.y, startz);
       #endif
     #elif MANUAL_PROBE_HEIGHT > 0
       const float prev_z = current_position.z;
-      do_blocking_move_to_xy_z(pos, MANUAL_PROBE_HEIGHT);
+      do_blocking_move_to(pos.x, pos.y, MANUAL_PROBE_HEIGHT);
       do_blocking_move_to_z(prev_z);
     #else
       do_blocking_move_to_xy(pos);

Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp

@@ -757,7 +757,7 @@
         const int point_num = (GRID_MAX_POINTS) - count + 1;
         SERIAL_ECHOLNPAIR("\nProbing mesh point ", point_num, "/", int(GRID_MAX_POINTS), ".\n");
         #if HAS_DISPLAY
-          ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_MESH), point_num, int(GRID_MAX_POINTS));
+          ui.status_printf_P(0, PSTR(MSG_PROBING_MESH " %i/%i"), point_num, int(GRID_MAX_POINTS));
         #endif
 
         #if HAS_LCD_MENU
@@ -892,7 +892,7 @@
       ui.capture();
 
       save_ubl_active_state_and_disable();  // No bed level correction so only raw data is obtained
-      do_blocking_move_to_xy_z(current_position, z_clearance);
+      do_blocking_move_to(current_position.x, current_position.y, z_clearance);
 
       ui.return_to_status();
 
@@ -921,7 +921,7 @@
 
         if (do_ubl_mesh_map) display_map(g29_map_type);  // show user where we're probing
 
-        serialprintPGM(parser.seen('B') ? GET_TEXT(MSG_UBL_BC_INSERT) : GET_TEXT(MSG_UBL_BC_INSERT2));
+        serialprintPGM(parser.seen('B') ? PSTR(MSG_UBL_BC_INSERT) : PSTR(MSG_UBL_BC_INSERT2));
 
         const float z_step = 0.01f;                         // existing behavior: 0.01mm per click, occasionally step
         //const float z_step = planner.steps_to_mm[Z_AXIS]; // approx one step each click
@@ -948,7 +948,7 @@
       if (do_ubl_mesh_map) display_map(g29_map_type);  // show user where we're probing
 
       restore_ubl_active_state_and_leave();
-      do_blocking_move_to_xy_z(pos, Z_CLEARANCE_DEPLOY_PROBE);
+      do_blocking_move_to(pos, Z_CLEARANCE_DEPLOY_PROBE);
     }
 
     inline void set_message_with_feedback(PGM_P const msg_P) {
@@ -959,7 +959,7 @@
     void abort_fine_tune() {
       ui.return_to_status();
       do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-      set_message_with_feedback(GET_TEXT(MSG_EDITING_STOPPED));
+      set_message_with_feedback(PSTR(MSG_EDITING_STOPPED));
     }
 
     void unified_bed_leveling::fine_tune_mesh(const xy_pos_t &pos, const bool do_ubl_mesh_map) {
@@ -986,7 +986,7 @@
       LCD_MESSAGEPGM(MSG_UBL_FINE_TUNE_MESH);
       ui.capture();                                         // Take over control of the LCD encoder
 
-      do_blocking_move_to_xy_z(pos, Z_CLEARANCE_BETWEEN_PROBES); // Move to the given XY with probe clearance
+      do_blocking_move_to(pos, Z_CLEARANCE_BETWEEN_PROBES); // Move to the given XY with probe clearance
 
       #if ENABLED(UBL_MESH_EDIT_MOVES_Z)
         do_blocking_move_to_z(h_offset);                    // Move Z to the given 'H' offset
@@ -1055,7 +1055,7 @@
       if (do_ubl_mesh_map) display_map(g29_map_type);
       restore_ubl_active_state_and_leave();
 
-      do_blocking_move_to_xy_z(pos, Z_CLEARANCE_BETWEEN_PROBES);
+      do_blocking_move_to(pos, Z_CLEARANCE_BETWEEN_PROBES);
 
       LCD_MESSAGEPGM(MSG_UBL_DONE_EDITING_MESH);
       SERIAL_ECHOLNPGM("Done Editing Mesh");
@@ -1072,7 +1072,7 @@
     bool err_flag = false;
 
     #if HAS_LCD_MENU
-      set_message_with_feedback(GET_TEXT(MSG_UBL_DOING_G29));
+      set_message_with_feedback(PSTR(MSG_UBL_DOING_G29));
     #endif
 
     g29_constant = 0;
@@ -1196,7 +1196,7 @@
       if (ubl_state_recursion_chk != 1) {
         SERIAL_ECHOLNPGM("save_ubl_active_state_and_disabled() called multiple times in a row.");
         #if HAS_LCD_MENU
-          set_message_with_feedback(GET_TEXT(MSG_UBL_SAVE_ERROR));
+          set_message_with_feedback(PSTR(MSG_UBL_SAVE_ERROR));
         #endif
         return;
       }
@@ -1210,7 +1210,7 @@
       if (--ubl_state_recursion_chk) {
         SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times.");
         #if HAS_LCD_MENU
-          set_message_with_feedback(GET_TEXT(MSG_UBL_RESTORE_ERROR));
+          set_message_with_feedback(PSTR(MSG_UBL_RESTORE_ERROR));
         #endif
         return;
       }
@@ -1410,7 +1410,7 @@
       if (do_3_pt_leveling) {
         SERIAL_ECHOLNPGM("Tilting mesh (1/3)");
         #if HAS_DISPLAY
-          ui.status_printf_P(0, PSTR(S_FMT " 1/3"), GET_TEXT(MSG_LCD_TILTING_MESH));
+          ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 1/3"));
         #endif
 
         measured_z = probe_at_point(points[0], PROBE_PT_RAISE, g29_verbose_level);
@@ -1431,7 +1431,7 @@
         if (!abort_flag) {
           SERIAL_ECHOLNPGM("Tilting mesh (2/3)");
           #if HAS_DISPLAY
-            ui.status_printf_P(0, PSTR(S_FMT " 2/3"), GET_TEXT(MSG_LCD_TILTING_MESH));
+            ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 2/3"));
           #endif
 
           measured_z = probe_at_point(points[1], PROBE_PT_RAISE, g29_verbose_level);
@@ -1453,7 +1453,7 @@
         if (!abort_flag) {
           SERIAL_ECHOLNPGM("Tilting mesh (3/3)");
           #if HAS_DISPLAY
-            ui.status_printf_P(0, PSTR(S_FMT " 3/3"), GET_TEXT(MSG_LCD_TILTING_MESH));
+            ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " 3/3"));
           #endif
 
           measured_z = probe_at_point(points[2], PROBE_PT_STOW, g29_verbose_level);
@@ -1497,7 +1497,7 @@
             if (!abort_flag) {
               SERIAL_ECHOLNPAIR("Tilting mesh point ", point_num, "/", total_points, "\n");
               #if HAS_DISPLAY
-                ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_LCD_TILTING_MESH), point_num, total_points);
+                ui.status_printf_P(0, PSTR(MSG_LCD_TILTING_MESH " %i/%i"), point_num, total_points);
               #endif
 
               measured_z = probe_at_point(rpos, parser.seen('E') ? PROBE_PT_STOW : PROBE_PT_RAISE, g29_verbose_level); // TODO: Needs error handling

Marlin/src/feature/binary_protocol.h

@@ -306,9 +306,6 @@ public:
       PORT_REDIRECT(card.transfer_port_index);
     #endif
 
-    #pragma GCC diagnostic push
-    #pragma GCC diagnostic ignored "-Warray-bounds"
-
     while (PENDING(millis(), transfer_window)) {
       switch (stream_state) {
          /**
@@ -442,8 +439,6 @@ public:
           break;
       }
     }
-
-    #pragma GCC diagnostic pop
   }
 
   void dispatch() {

Marlin/src/feature/cancel_object.cpp

@@ -1,76 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#include "../inc/MarlinConfig.h"
-
-#if ENABLED(CANCEL_OBJECTS)
-
-#include "cancel_object.h"
-#include "../gcode/gcode.h"
-#include "../lcd/ultralcd.h"
-
-CancelObject cancelable;
-
-int8_t CancelObject::object_count, // = 0
-       CancelObject::active_object = -1;
-uint32_t CancelObject::canceled; // = 0x0000
-bool CancelObject::skipping; // = false
-
-void CancelObject::set_active_object(const int8_t obj) {
-  active_object = obj;
-  if (WITHIN(obj, 0, 31)) {
-    if (obj >= object_count) object_count = obj + 1;
-    skipping = TEST(canceled, obj);
-  }
-  else
-    skipping = false;
-}
-
-void CancelObject::cancel_object(const int8_t obj) {
-  if (WITHIN(obj, 0, 31)) {
-    SBI(canceled, obj);
-    if (obj == active_object) skipping = true;
-  }
-}
-
-void CancelObject::uncancel_object(const int8_t obj) {
-  if (WITHIN(obj, 0, 31)) {
-    CBI(canceled, obj);
-    if (obj == active_object) skipping = false;
-  }
-}
-
-void CancelObject::report() {
-  if (active_object >= 0) {
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPAIR("Active Object: ", int(active_object));
-  }
-
-  if (canceled) {
-    SERIAL_ECHO_START();
-    SERIAL_ECHOPGM("Canceled:");
-    for (int i = 0; i < object_count; i++)
-      if (TEST(canceled, i)) { SERIAL_CHAR(' '); SERIAL_ECHO(i); }
-    SERIAL_EOL();
-  }
-}
-
-#endif // CANCEL_OBJECTS

Marlin/src/feature/cancel_object.h

@@ -1,40 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <stdint.h>
-
-class CancelObject {
-public:
-  static bool skipping;
-  static int8_t object_count, active_object;
-  static uint32_t canceled;
-  static void set_active_object(const int8_t obj);
-  static void cancel_object(const int8_t obj);
-  static void uncancel_object(const int8_t obj);
-  static void report();
-  static inline void clear_active_object() { set_active_object(-1); }
-  static inline void cancel_active_object() { cancel_object(active_object); }
-  static inline void reset() { canceled = 0x0000; object_count = 0; clear_active_object(); }
-};
-
-extern CancelObject cancelable;

Marlin/src/feature/caselight.cpp

@@ -71,13 +71,7 @@ void update_case_light() {
 
     #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
       if (PWM_PIN(CASE_LIGHT_PIN))
-        analogWrite(pin_t(CASE_LIGHT_PIN),
-          #if CASE_LIGHT_MAX_PWM == 255
-            n10ct
-          #else
-            map(n10ct, 0, 255, 0, CASE_LIGHT_MAX_PWM)
-          #endif
-        );
+        analogWrite(pin_t(CASE_LIGHT_PIN), n10ct);
       else
     #endif
       {

Marlin/src/feature/digipot/digipot_mcp4451.cpp

@@ -35,7 +35,7 @@
 #if MB(5DPRINT)
   #define DIGIPOT_I2C_FACTOR 117.96
   #define DIGIPOT_I2C_MAX_CURRENT 1.736
-#elif MB(AZTEEG_X5_MINI, AZTEEG_X5_MINI_WIFI)
+#elif MB(AZTEEG_X5_MINI) || MB(AZTEEG_X5_MINI_WIFI)
   #define DIGIPOT_I2C_FACTOR 113.5
   #define DIGIPOT_I2C_MAX_CURRENT 2.0
 #else

Marlin/src/feature/host_actions.cpp

@@ -102,8 +102,8 @@ void host_action(const char * const pstr, const bool eol) {
 
   void host_response_handler(const uint8_t response) {
     #ifdef DEBUG_HOST_ACTIONS
-      SERIAL_ECHOLNPAIR("M876 Handle Reason: ", host_prompt_reason);
-      SERIAL_ECHOLNPAIR("M876 Handle Response: ", response);
+      SERIAL_ECHOLNPAIR("M86 Handle Reason: ", host_prompt_reason);
+      SERIAL_ECHOLNPAIR("M86 Handle Response: ", response);
     #endif
     const char *msg = PSTR("UNKNOWN STATE");
     const PromptReason hpr = host_prompt_reason;

Marlin/src/feature/pause.cpp

@@ -53,7 +53,6 @@
   #include "../lcd/extensible_ui/ui_api.h"
 #endif
 
-#include "../core/language.h"
 #include "../lcd/ultralcd.h"
 
 #if HAS_BUZZER
@@ -77,12 +76,6 @@ fil_change_settings_t fc_settings[EXTRUDERS];
   #include "../sd/cardreader.h"
 #endif
 
-#if ENABLED(EMERGENCY_PARSER)
-  #define _PMSG(L) L##_M108
-#else
-  #define _PMSG(L) L##_LCD
-#endif
-
 #if HAS_BUZZER
   static void filament_change_beep(const int8_t max_beep_count, const bool init=false) {
     if (pause_mode == PAUSE_MODE_PAUSE_PRINT) return;
@@ -170,7 +163,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
     #if HAS_LCD_MENU
       if (show_lcd) lcd_pause_show_message(PAUSE_MESSAGE_INSERT, mode);
     #endif
-    SERIAL_ECHO_MSG(_PMSG(MSG_FILAMENT_CHANGE_INSERT));
+    SERIAL_ECHO_MSG(MSG_FILAMENT_CHANGE_INSERT);
 
     #if HAS_BUZZER
       filament_change_beep(max_beep_count, true);
@@ -195,7 +188,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
       host_action_prompt_show();
     #endif
     #if ENABLED(EXTENSIBLE_UI)
-      ExtUI::onUserConfirmRequired_P(PSTR("Load Filament"));
+      ExtUI::onUserConfirmRequired(PSTR("Load Filament"));
     #endif
     while (wait_for_user) {
       #if HAS_BUZZER
@@ -250,7 +243,7 @@ bool load_filament(const float &slow_load_length/*=0*/, const float &fast_load_l
       host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Filament Purge Running..."), PSTR("Continue"));
     #endif
     #if ENABLED(EXTENSIBLE_UI)
-      ExtUI::onUserConfirmRequired_P(PSTR("Filament Purge Running..."));
+      ExtUI::onUserConfirmRequired(PSTR("Filament Purge Running..."));
     #endif
     for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count)
       do_pause_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE);
@@ -488,6 +481,14 @@ bool pause_print(const float &retract, const xyz_pos_t &park_point, const float
  * Used by M125 and M600
  */
 
+#if (HAS_LCD_MENU || ENABLED(EXTENSIBLE_UI)) && ENABLED(EMERGENCY_PARSER)
+  #define _PMSG(L) L
+#elif ENABLED(EMERGENCY_PARSER)
+  #define _PMSG(L) L##_M108
+#else
+  #define _PMSG(L) L##_LCD
+#endif
+
 void show_continue_prompt(const bool is_reload) {
   #if HAS_LCD_MENU
     lcd_pause_show_message(is_reload ? PAUSE_MESSAGE_INSERT : PAUSE_MESSAGE_WAITING);
@@ -526,7 +527,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
     host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Nozzle Parked"), PSTR("Continue"));
   #endif
   #if ENABLED(EXTENSIBLE_UI)
-    ExtUI::onUserConfirmRequired_P(PSTR("Nozzle Parked"));
+    ExtUI::onUserConfirmRequired(PSTR("Nozzle Parked"));
   #endif
   while (wait_for_user) {
     #if HAS_BUZZER
@@ -550,7 +551,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
       #endif
 
       #if ENABLED(EXTENSIBLE_UI)
-        ExtUI::onUserConfirmRequired_P(PSTR("HeaterTimeout"));
+        ExtUI::onUserConfirmRequired(PSTR("HeaterTimeout"));
       #endif
 
       // Wait for LCD click or M108
@@ -580,7 +581,7 @@ void wait_for_confirmation(const bool is_reload/*=false*/, const int8_t max_beep
         host_prompt_do(PROMPT_USER_CONTINUE, PSTR("Reheat Done"), PSTR("Continue"));
       #endif
       #if ENABLED(EXTENSIBLE_UI)
-        ExtUI::onUserConfirmRequired_P(PSTR("Reheat finished."));
+        ExtUI::onUserConfirmRequired("Reheat finished.");
       #endif
       wait_for_user = true;
       nozzle_timed_out = false;

Marlin/src/feature/power_loss_recovery.cpp

@@ -228,7 +228,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const bool save_queue/*=
 #if PIN_EXISTS(POWER_LOSS)
   void PrintJobRecovery::_outage() {
     save(true);
-    kill(GET_TEXT(MSG_OUTAGE_RECOVERY));
+    kill(PSTR(MSG_OUTAGE_RECOVERY));
   }
 #endif
 
@@ -327,10 +327,9 @@ void PrintJobRecovery::resume() {
   // Restore retract and hop state
   #if ENABLED(FWRETRACT)
     for (uint8_t e = 0; e < EXTRUDERS; e++) {
-      if (info.retract[e] != 0.0) {
+      if (info.retract[e] != 0.0)
         fwretract.current_retract[e] = info.retract[e];
         fwretract.retracted[e] = true;
-      }
     }
     fwretract.current_hop = info.retract_hop;
   #endif

Marlin/src/feature/prusa_MMU2/mmu2.cpp

@@ -97,7 +97,7 @@ volatile int8_t MMU2::finda = 1;
 volatile bool MMU2::finda_runout_valid;
 int16_t MMU2::version = -1, MMU2::buildnr = -1;
 millis_t MMU2::last_request, MMU2::next_P0_request;
-char MMU2::rx_buffer[MMU_RX_SIZE], MMU2::tx_buffer[MMU_TX_SIZE];
+char MMU2::rx_buffer[16], MMU2::tx_buffer[16];
 
 #if HAS_LCD_MENU && ENABLED(MMU2_MENUS)
 
@@ -433,7 +433,7 @@ bool MMU2::rx_ok() {
 void MMU2::check_version() {
   if (buildnr < MMU_REQUIRED_FW_BUILDNR) {
     SERIAL_ERROR_MSG("Invalid MMU2 firmware. Version >= " STRINGIFY(MMU_REQUIRED_FW_BUILDNR) " required.");
-    kill(GET_TEXT(MSG_MMU2_WRONG_FIRMWARE));
+    kill(MSG_MMU2_WRONG_FIRMWARE);
   }
 }
 
@@ -449,7 +449,7 @@ void MMU2::tool_change(uint8_t index) {
   if (index != extruder) {
 
     disable_E0();
-    ui.status_printf_P(0, GET_TEXT(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
+    ui.status_printf_P(0, PSTR(MSG_MMU2_LOADING_FILAMENT), int(index + 1));
 
     command(MMU_CMD_T0 + index);
 
@@ -712,7 +712,7 @@ void MMU2::filament_runout() {
         host_prompt_do(PROMPT_USER_CONTINUE, PSTR("MMU2 Eject Recover"), PSTR("Continue"));
       #endif
       #if ENABLED(EXTENSIBLE_UI)
-        ExtUI::onUserConfirmRequired_P(PSTR("MMU2 Eject Recover"));
+        ExtUI::onUserConfirmRequired(PSTR("MMU2 Eject Recover"));
       #endif
       while (wait_for_user) idle();
       BUZZ(200, 404);

Marlin/src/feature/prusa_MMU2/mmu2.h

@@ -27,14 +27,6 @@
   #include "../runout.h"
 #endif
 
-#if SERIAL_USB
-  #define MMU_RX_SIZE 256
-  #define MMU_TX_SIZE 256
-#else
-  #define MMU_RX_SIZE  16
-  #define MMU_TX_SIZE  16
-#endif
-
 struct E_Step;
 
 class MMU2 {
@@ -87,7 +79,7 @@ private:
   static volatile bool finda_runout_valid;
   static int16_t version, buildnr;
   static millis_t last_request, next_P0_request;
-  static char rx_buffer[MMU_RX_SIZE], tx_buffer[MMU_TX_SIZE];
+  static char rx_buffer[16], tx_buffer[16];
 
   static inline void set_runout_valid(const bool valid) {
     finda_runout_valid = valid;

Marlin/src/feature/spindle_laser.cpp

@@ -34,16 +34,14 @@ SpindleLaser cutter;
 
 cutter_power_t SpindleLaser::power; // = 0
 
-#define SPINDLE_LASER_PWM_OFF ((SPINDLE_LASER_PWM_INVERT) ? 255 : 0)
-
 void SpindleLaser::init() {
   OUT_WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH); // Init spindle to off
   #if ENABLED(SPINDLE_CHANGE_DIR)
     OUT_WRITE(SPINDLE_DIR_PIN, SPINDLE_INVERT_DIR ? 255 : 0);   // Init rotation to clockwise (M3)
   #endif
-  #if ENABLED(SPINDLE_LASER_PWM)
+  #if ENABLED(SPINDLE_LASER_PWM) && PIN_EXISTS(SPINDLE_LASER_PWM)
     SET_PWM(SPINDLE_LASER_PWM_PIN);
-    analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF);  // set to lowest speed
+    analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_INVERT ? 255 : 0);  // set to lowest speed
   #endif
 }
 
@@ -56,34 +54,34 @@ void SpindleLaser::init() {
    */
   void SpindleLaser::set_ocr(const uint8_t ocr) {
     WRITE(SPINDLE_LASER_ENA_PIN, SPINDLE_LASER_ACTIVE_HIGH); // turn spindle on (active low)
-    analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), ocr ^ SPINDLE_LASER_PWM_OFF);
+    #if ENABLED(SPINDLE_LASER_PWM)
+      analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), (SPINDLE_LASER_PWM_INVERT) ? 255 - ocr : ocr);
+    #endif
   }
 
 #endif
 
-void SpindleLaser::apply_power(const cutter_power_t inpow) {
-  static cutter_power_t last_power_applied = 0;
-  if (inpow == last_power_applied) return;
-  last_power_applied = inpow;
+void SpindleLaser::update_output() {
+  const bool ena = enabled();
   #if ENABLED(SPINDLE_LASER_PWM)
-    if (enabled()) {
-      #define _scaled(F) ((F - (SPEED_POWER_INTERCEPT)) * inv_slope)
+    if (ena) {
       constexpr float inv_slope = RECIPROCAL(SPEED_POWER_SLOPE),
-                      min_ocr = _scaled(SPEED_POWER_MIN),
-                      max_ocr = _scaled(SPEED_POWER_MAX);
+                      min_ocr = (SPEED_POWER_MIN - (SPEED_POWER_INTERCEPT)) * inv_slope,  // Minimum allowed
+                      max_ocr = (SPEED_POWER_MAX - (SPEED_POWER_INTERCEPT)) * inv_slope;  // Maximum allowed
       int16_t ocr_val;
-           if (inpow <= SPEED_POWER_MIN) ocr_val = min_ocr;       // Use minimum if set below
-      else if (inpow >= SPEED_POWER_MAX) ocr_val = max_ocr;       // Use maximum if set above
-      else ocr_val = _scaled(inpow);                              // Use calculated OCR value
-      set_ocr(ocr_val & 0xFF);                                    // ...limited to Atmel PWM max
+           if (power <= SPEED_POWER_MIN) ocr_val = min_ocr;                               // Use minimum if set below
+      else if (power >= SPEED_POWER_MAX) ocr_val = max_ocr;                               // Use maximum if set above
+      else ocr_val = (power - (SPEED_POWER_INTERCEPT)) * inv_slope;                       // Use calculated OCR value
+      set_ocr(ocr_val & 0xFF);                                                            // ...limited to Atmel PWM max
     }
-    else {
-      WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH);   // Turn spindle off (active low)
-      analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_OFF);  // Only write low byte
+    else {                                                                                // Convert RPM to PWM duty cycle
+      WRITE(SPINDLE_LASER_ENA_PIN, !SPINDLE_LASER_ACTIVE_HIGH);                           // Turn spindle off (active low)
+      analogWrite(pin_t(SPINDLE_LASER_PWM_PIN), SPINDLE_LASER_PWM_INVERT ? 255 : 0);      // Only write low byte
     }
   #else
-    WRITE(SPINDLE_LASER_ENA_PIN, (SPINDLE_LASER_ACTIVE_HIGH) ? enabled() : !enabled());
+    WRITE(SPINDLE_LASER_ENA_PIN, ena ? SPINDLE_LASER_ACTIVE_HIGH : !SPINDLE_LASER_ACTIVE_HIGH);
   #endif
+  power_delay(ena);
 }
 
 #if ENABLED(SPINDLE_CHANGE_DIR)

Marlin/src/feature/spindle_laser.h

@@ -36,10 +36,10 @@
 #define MSG_CUTTER(M) _MSG_CUTTER(M)
 
 #if SPEED_POWER_MAX > 255
-  typedef uint16_t cutter_power_t;
+  #define cutter_power_t   uint16_t
   #define CUTTER_MENU_TYPE uint16_5
 #else
-  typedef uint8_t cutter_power_t;
+  #define cutter_power_t   uint8_t
   #define CUTTER_MENU_TYPE uint8
 #endif
 
@@ -51,17 +51,9 @@ public:
 
   static inline bool enabled() { return !!power; }
 
-  static inline void set_power(const cutter_power_t pwr) { power = pwr; }
+  static inline void set_power(const uint8_t pwr) { power = pwr; update_output(); }
 
-  static inline void refresh() { apply_power(power); }
-
-  static inline void set_enabled(const bool enable) {
-    const bool was = enabled();
-    set_power(enable ? 255 : 0);
-    if (was != enable) power_delay();
-  }
-
-  static void apply_power(const cutter_power_t inpow);
+  static inline void set_enabled(const bool enable) { set_power(enable ? 255 : 0); }
 
   //static bool active() { return READ(SPINDLE_LASER_ENA_PIN) == SPINDLE_LASER_ACTIVE_HIGH; }
 
@@ -69,15 +61,11 @@ public:
 
   #if ENABLED(SPINDLE_LASER_PWM)
     static void set_ocr(const uint8_t ocr);
-    static inline void set_ocr_power(const cutter_power_t pwr) { power = pwr; set_ocr(pwr); }
+    static inline void set_ocr_power(const uint8_t pwr) { power = pwr; set_ocr(pwr); }
   #endif
 
   // Wait for spindle to spin up or spin down
-  static inline void power_delay() {
-    #if SPINDLE_LASER_POWERUP_DELAY || SPINDLE_LASER_POWERDOWN_DELAY
-      safe_delay(enabled() ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY);
-    #endif
-  }
+  static inline void power_delay(const bool on) { safe_delay(on ? SPINDLE_LASER_POWERUP_DELAY : SPINDLE_LASER_POWERDOWN_DELAY); }
 
   #if ENABLED(SPINDLE_CHANGE_DIR)
     static void set_direction(const bool reverse);

Marlin/src/feature/tmc_util.cpp

@@ -1118,7 +1118,7 @@ void test_tmc_connection(const bool test_x, const bool test_y, const bool test_z
     #endif
   }
 
-  if (axis_connection) ui.set_status_P(GET_TEXT(MSG_ERROR_TMC));
+  if (axis_connection) ui.set_status_P(PSTR(MSG_ERROR_TMC));
 }
 
 #endif // HAS_TRINAMIC

Marlin/src/feature/tmc_util.h

@@ -393,16 +393,34 @@ void test_tmc_connection(const bool test_x, const bool test_y, const bool test_z
 
     template<class TMC, char AXIS_LETTER, char DRIVER_ID, AxisEnum AXIS_ID>
     bool TMCMarlin<TMC, AXIS_LETTER, DRIVER_ID, AXIS_ID>::test_stall_status() {
+      uint16_t sg_result = 0;
+
       this->switchCSpin(LOW);
 
-      // read stallGuard flag from TMC library, will handle HW and SW SPI
-      TMC2130_n::DRV_STATUS_t drv_status{0};
-      drv_status.sr = this->DRV_STATUS();
-
+      if (this->TMC_SW_SPI != nullptr) {
+        this->TMC_SW_SPI->transfer(TMC2130_n::DRV_STATUS_t::address);
+        this->TMC_SW_SPI->transfer16(0);
+        // We only care about the last 10 bits
+        sg_result = this->TMC_SW_SPI->transfer(0);
+        sg_result <<= 8;
+        sg_result |= this->TMC_SW_SPI->transfer(0);
+      }
+      else {
+        SPI.beginTransaction(SPISettings(16000000/8, MSBFIRST, SPI_MODE3));
+        // Read DRV_STATUS
+        SPI.transfer(TMC2130_n::DRV_STATUS_t::address);
+        SPI.transfer16(0);
+        // We only care about the last 10 bits
+        sg_result = SPI.transfer(0);
+        sg_result <<= 8;
+        sg_result |= SPI.transfer(0);
+        SPI.endTransaction();
+      }
       this->switchCSpin(HIGH);
 
-      return drv_status.stallGuard;
+      return (sg_result & 0x3FF) == 0;
     }
+
   #endif // SPI_ENDSTOPS
 
 #endif // USE_SENSORLESS

Marlin/src/gcode/bedlevel/G26.cpp

@@ -168,7 +168,7 @@ int8_t g26_prime_flag;
    */
   bool user_canceled() {
     if (!ui.button_pressed()) return false; // Return if the button isn't pressed
-    ui.set_status_P(GET_TEXT(MSG_G26_CANCELED), 99);
+    ui.set_status_P(PSTR(MSG_G26_CANCELED), 99);
     #if HAS_LCD_MENU
       ui.quick_feedback();
     #endif
@@ -370,7 +370,7 @@ inline bool turn_on_heaters() {
 
     if (g26_bed_temp > 25) {
       #if HAS_SPI_LCD
-        ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99);
+        ui.set_status_P(PSTR(MSG_G26_HEATING_BED), 99);
         ui.quick_feedback();
         #if HAS_LCD_MENU
           ui.capture();
@@ -391,7 +391,7 @@ inline bool turn_on_heaters() {
 
   // Start heating the active nozzle
   #if HAS_SPI_LCD
-    ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99);
+    ui.set_status_P(PSTR(MSG_G26_HEATING_NOZZLE), 99);
     ui.quick_feedback();
   #endif
   thermalManager.setTargetHotend(g26_hotend_temp, active_extruder);
@@ -426,7 +426,7 @@ inline bool prime_nozzle() {
     if (g26_prime_flag == -1) {  // The user wants to control how much filament gets purged
 
       ui.capture();
-      ui.set_status_P(GET_TEXT(MSG_G26_MANUAL_PRIME), 99);
+      ui.set_status_P(PSTR(MSG_G26_MANUAL_PRIME), 99);
       ui.chirp();
 
       destination = current_position;
@@ -450,7 +450,7 @@ inline bool prime_nozzle() {
 
       ui.wait_for_release();
 
-      ui.set_status_P(GET_TEXT(MSG_G26_PRIME_DONE), 99);
+      ui.set_status_P(PSTR(MSG_G26_PRIME_DONE), 99);
       ui.quick_feedback();
       ui.release();
     }
@@ -458,7 +458,7 @@ inline bool prime_nozzle() {
   #endif
   {
     #if HAS_SPI_LCD
-      ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99);
+      ui.set_status_P(PSTR(MSG_G26_FIXED_LENGTH), 99);
       ui.quick_feedback();
     #endif
     destination = current_position;
@@ -827,7 +827,7 @@ void GcodeSuite::G26() {
   } while (--g26_repeats && location.valid());
 
   LEAVE:
-  ui.set_status_P(GET_TEXT(MSG_G26_LEAVING), -1);
+  ui.set_status_P(PSTR(MSG_G26_LEAVING), -1);
 
   retract_filament(destination);
   destination.z = Z_CLEARANCE_BETWEEN_PROBES;

Marlin/src/gcode/bedlevel/M420.cpp

@@ -27,7 +27,6 @@
 #include "../gcode.h"
 #include "../../feature/bedlevel/bedlevel.h"
 #include "../../module/planner.h"
-#include "../../module/probe.h"
 
 #if ENABLED(EEPROM_SETTINGS)
   #include "../../module/configuration_store.h"
@@ -64,9 +63,9 @@ void GcodeSuite::M420() {
 
   #if ENABLED(MARLIN_DEV_MODE)
     if (parser.intval('S') == 2) {
-      const float x_min = probe_min_x(), x_max = probe_max_x(),
-                  y_min = probe_min_y(), y_max = probe_max_y();
       #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+        const float x_min = probe_min_x(), x_max = probe_max_x(),
+                    y_min = probe_min_y(), y_max = probe_max_y();
         bilinear_start.set(x_min, y_min);
         bilinear_grid_spacing.set((x_max - x_min) / (GRID_MAX_POINTS_X - 1),
                                   (y_max - y_min) / (GRID_MAX_POINTS_Y - 1));

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -722,10 +722,10 @@ G29_TYPE GcodeSuite::G29() {
 
           if (verbose_level) SERIAL_ECHOLNPAIR("Probing mesh point ", int(pt_index), "/", int(GRID_MAX_POINTS), ".");
           #if HAS_DISPLAY
-            ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_MESH), int(pt_index), int(GRID_MAX_POINTS));
+            ui.status_printf_P(0, PSTR(S_FMT " %i/%i"), PSTR(MSG_PROBING_MESH), int(pt_index), int(GRID_MAX_POINTS));
           #endif
 
-          measured_z = faux ? 0.001f * random(-100, 101) : probe_at_point(probePos, raise_after, verbose_level);
+          measured_z = faux ? 0.001 * random(-100, 101) : probe_at_point(probePos, raise_after, verbose_level);
 
           if (isnan(measured_z)) {
             set_bed_leveling_enabled(abl_should_enable);
@@ -764,7 +764,7 @@ G29_TYPE GcodeSuite::G29() {
       for (uint8_t i = 0; i < 3; ++i) {
         if (verbose_level) SERIAL_ECHOLNPAIR("Probing point ", int(i), "/3.");
         #if HAS_DISPLAY
-          ui.status_printf_P(0, PSTR(S_FMT" %i/3"), GET_TEXT(MSG_PROBING_MESH)), int(i);
+          ui.status_printf_P(0, PSTR(MSG_PROBING_MESH " %i/3"), int(i));
         #endif
 
         // Retain the last probe position

Marlin/src/gcode/calibrate/G28.cpp

@@ -118,7 +118,7 @@
     // Disallow Z homing if X or Y are unknown
     if (!TEST(axis_known_position, X_AXIS) || !TEST(axis_known_position, Y_AXIS)) {
       LCD_MESSAGEPGM(MSG_ERR_Z_HOMING);
-      SERIAL_ECHO_MSG(MSG_ERR_Z_HOMING_SER);
+      SERIAL_ECHO_MSG(MSG_ERR_Z_HOMING);
       return;
     }
 
@@ -154,7 +154,7 @@
     }
     else {
       LCD_MESSAGEPGM(MSG_ZPROBE_OUT);
-      SERIAL_ECHO_MSG(MSG_ZPROBE_OUT_SER);
+      SERIAL_ECHO_MSG(MSG_ZPROBE_OUT);
     }
 
     if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPGM("<<< home_z_safely");
@@ -162,33 +162,6 @@
 
 #endif // Z_SAFE_HOMING
 
-#if ENABLED(IMPROVE_HOMING_RELIABILITY)
-
-  slow_homing_t begin_slow_homing() {
-    slow_homing_t slow_homing{0};
-    slow_homing.acceleration.set(planner.settings.max_acceleration_mm_per_s2[X_AXIS],
-                                 planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
-    planner.settings.max_acceleration_mm_per_s2[X_AXIS] = 100;
-    planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = 100;
-    #if HAS_CLASSIC_JERK
-      slow_homing.jerk_xy = planner.max_jerk;
-      planner.max_jerk.set(0, 0);
-    #endif
-    planner.reset_acceleration_rates();
-    return slow_homing;
-  }
-
-  void end_slow_homing(const slow_homing_t &slow_homing) {
-    planner.settings.max_acceleration_mm_per_s2[X_AXIS] = slow_homing.acceleration.x;
-    planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = slow_homing.acceleration.y;
-    #if HAS_CLASSIC_JERK
-      planner.max_jerk = slow_homing.jerk_xy;
-    #endif
-    planner.reset_acceleration_rates();
-  }
-
-#endif // IMPROVE_HOMING_RELIABILITY
-
 /**
  * G28: Home all axes according to settings
  *
@@ -257,7 +230,17 @@ void GcodeSuite::G28(const bool always_home_all) {
   #endif
 
   #if ENABLED(IMPROVE_HOMING_RELIABILITY)
-    slow_homing_t slow_homing = begin_slow_homing();
+    slow_homing_t slow_homing{0};
+    slow_homing.acceleration.set(planner.settings.max_acceleration_mm_per_s2[X_AXIS],
+                                 planner.settings.max_acceleration_mm_per_s2[Y_AXIS]);
+    planner.settings.max_acceleration_mm_per_s2[X_AXIS] = 100;
+    planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = 100;
+    #if HAS_CLASSIC_JERK
+      slow_homing.jerk_xy = planner.max_jerk;
+      planner.max_jerk.set(0, 0);
+    #endif
+
+    planner.reset_acceleration_rates();
   #endif
 
   // Always home with tool 0 active
@@ -281,10 +264,6 @@ void GcodeSuite::G28(const bool always_home_all) {
     home_delta();
     UNUSED(always_home_all);
 
-    #if ENABLED(IMPROVE_HOMING_RELIABILITY)
-      end_slow_homing(slow_homing);
-    #endif
-
   #else // NOT DELTA
 
     const bool homeX = parser.seen('X'), homeY = parser.seen('Y'), homeZ = parser.seen('Z'),
@@ -369,10 +348,6 @@ void GcodeSuite::G28(const bool always_home_all) {
       if (doY) homeaxis(Y_AXIS);
     #endif
 
-    #if ENABLED(IMPROVE_HOMING_RELIABILITY)
-      end_slow_homing(slow_homing);
-    #endif
-
     // Home Z last if homing towards the bed
     #if Z_HOME_DIR < 0
       if (doZ) {
@@ -406,10 +381,6 @@ void GcodeSuite::G28(const bool always_home_all) {
 
     if (dxc_is_duplicating()) {
 
-      #if ENABLED(IMPROVE_HOMING_RELIABILITY)
-        slow_homing = begin_slow_homing();
-      #endif
-
       // Always home the 2nd (right) extruder first
       active_extruder = 1;
       homeaxis(X_AXIS);
@@ -430,10 +401,6 @@ void GcodeSuite::G28(const bool always_home_all) {
 
       dual_x_carriage_mode         = IDEX_saved_mode;
       stepper.set_directions();
-
-      #if ENABLED(IMPROVE_HOMING_RELIABILITY)
-        end_slow_homing(slow_homing);
-      #endif
     }
 
   #endif // DUAL_X_CARRIAGE
@@ -466,6 +433,15 @@ void GcodeSuite::G28(const bool always_home_all) {
     tool_change(old_tool_index, NO_FETCH);
   #endif
 
+  #if ENABLED(IMPROVE_HOMING_RELIABILITY)
+    planner.settings.max_acceleration_mm_per_s2[X_AXIS] = slow_homing.acceleration.x;
+    planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = slow_homing.acceleration.y;
+    #if HAS_CLASSIC_JERK
+      planner.max_jerk = slow_homing.jerk_xy;
+    #endif
+    planner.reset_acceleration_rates();
+  #endif
+
   ui.refresh();
 
   report_current_position();

Marlin/src/gcode/calibrate/G34_M422.cpp

@@ -25,49 +25,37 @@
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
 
 #include "../gcode.h"
-#include "../../module/planner.h"
-#include "../../module/stepper.h"
+#include "../../module/delta.h"
 #include "../../module/motion.h"
-#include "../../module/probe.h"
+#include "../../module/stepper.h"
+#include "../../module/endstops.h"
 
 #if HOTENDS > 1
   #include "../../module/tool_change.h"
 #endif
 
+#if HAS_BED_PROBE
+  #include "../../module/probe.h"
+#endif
+
 #if HAS_LEVELING
   #include "../../feature/bedlevel/bedlevel.h"
 #endif
 
-#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-   #include "../../libs/least_squares_fit.h"
-#endif
-
 #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE)
 #include "../../core/debug_out.h"
 
-// Sanity-check the count of Z_STEPPER_ALIGN_XY points
+// Sanity-check
 constexpr xy_pos_t sanity_arr_z_align[] = Z_STEPPER_ALIGN_XY;
-#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  static_assert(COUNT(sanity_arr_z_align) >= Z_STEPPER_COUNT,
-    "Z_STEPPER_ALIGN_XY requires at least three {X,Y} entries (Z, Z2, Z3, ...)."
-  );
-#else
-  static_assert(COUNT(sanity_arr_z_align) == Z_STEPPER_COUNT,
-    #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
-      "Z_STEPPER_ALIGN_XY requires three {X,Y} entries (Z, Z2, and Z3)."
-    #else
-      "Z_STEPPER_ALIGN_XY requires two {X,Y} entries (Z and Z2)."
-    #endif
-  );
-#endif
+static_assert(COUNT(sanity_arr_z_align) == Z_STEPPER_COUNT,
+  #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
+    "Z_STEPPER_ALIGN_XY requires three {X,Y} entries (Z, Z2, and Z3)."
+  #else
+    "Z_STEPPER_ALIGN_XY requires two {X,Y} entries (Z and Z2)."
+  #endif
+);
 
-static xy_pos_t z_auto_align_pos[Z_STEPPER_COUNT] = Z_STEPPER_ALIGN_XY;
-
-#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  static xy_pos_t z_stepper_pos[] = Z_STEPPER_ALIGN_STEPPER_XY;
-#endif
-
-#define G34_PROBE_COUNT COUNT(z_auto_align_pos)
+xy_pos_t z_auto_align_pos[Z_STEPPER_COUNT] = Z_STEPPER_ALIGN_XY;
 
 inline void set_all_z_lock(const bool lock) {
   stepper.set_z_lock(lock);
@@ -80,9 +68,7 @@ inline void set_all_z_lock(const bool lock) {
 /**
  * G34: Z-Stepper automatic alignment
  *
- *   I<iterations>
- *   T<accuracy>
- *   A<amplification>
+ * Parameters: I<iterations> T<accuracy> A<amplification>
  */
 void GcodeSuite::G34() {
   if (DEBUGGING(LEVELING)) {
@@ -104,18 +90,11 @@ void GcodeSuite::G34() {
       break;
     }
 
-    const float z_auto_align_amplification =
-      #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-        Z_STEPPER_ALIGN_AMP;
-      #else
-        parser.floatval('A', Z_STEPPER_ALIGN_AMP);
-        if (!WITHIN(ABS(z_auto_align_amplification), 0.5f, 2.0f)) {
-          SERIAL_ECHOLNPGM("?(A)mplification out of bounds (0.5-2.0).");
-          break;
-        }
-      #endif
-
-    const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE;
+    const float z_auto_align_amplification = parser.floatval('A', Z_STEPPER_ALIGN_AMP);
+    if (!WITHIN(ABS(z_auto_align_amplification), 0.5f, 2.0f)) {
+      SERIAL_ECHOLNPGM("?(A)mplification out of bounds (0.5-2.0).");
+      break;
+    }
 
     // Wait for planner moves to finish!
     planner.synchronize();
@@ -151,13 +130,11 @@ void GcodeSuite::G34() {
       #define Z_BASIC_CLEARANCE Z_CLEARANCE_BETWEEN_PROBES
     #endif
 
-    // Compute a worst-case clearance height to probe from. After the first
-    // iteration this will be re-calculated based on the actual bed position
     float z_probe = Z_BASIC_CLEARANCE + (G34_MAX_GRADE) * 0.01f * (
       #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
          SQRT(_MAX(HYPOT2(z_auto_align_pos[0].x - z_auto_align_pos[0].y, z_auto_align_pos[1].x - z_auto_align_pos[1].y),
-                   HYPOT2(z_auto_align_pos[1].x - z_auto_align_pos[1].y, z_auto_align_pos[2].x - z_auto_align_pos[2].y),
-                   HYPOT2(z_auto_align_pos[2].x - z_auto_align_pos[2].y, z_auto_align_pos[0].x - z_auto_align_pos[0].y)))
+                  HYPOT2(z_auto_align_pos[1].x - z_auto_align_pos[1].y, z_auto_align_pos[2].x - z_auto_align_pos[2].y),
+                  HYPOT2(z_auto_align_pos[2].x - z_auto_align_pos[2].y, z_auto_align_pos[0].x - z_auto_align_pos[0].y)))
       #else
          HYPOT(z_auto_align_pos[0].x - z_auto_align_pos[0].y, z_auto_align_pos[1].x - z_auto_align_pos[1].y)
       #endif
@@ -170,10 +147,12 @@ void GcodeSuite::G34() {
     current_position.z -= z_probe * 0.5f;
 
     float last_z_align_move[Z_STEPPER_COUNT] = ARRAY_N(Z_STEPPER_COUNT, 10000.0f, 10000.0f, 10000.0f),
-          z_measured[G34_PROBE_COUNT] = { 0 },
+          z_measured[Z_STEPPER_COUNT] = { 0 },
           z_maxdiff = 0.0f,
           amplification = z_auto_align_amplification;
 
+    const ProbePtRaise raise_after = parser.boolval('E') ? PROBE_PT_STOW : PROBE_PT_RAISE;
+
     uint8_t iteration;
     bool err_break = false;
     for (iteration = 0; iteration < z_auto_align_iterations; ++iteration) {
@@ -182,19 +161,17 @@ void GcodeSuite::G34() {
       SERIAL_ECHOLNPAIR("\nITERATION: ", int(iteration + 1));
 
       // Initialize minimum value
-      float z_measured_min = 100000.0f,
-            z_measured_max = -100000.0f;
-
+      float z_measured_min = 100000.0f;
       // Probe all positions (one per Z-Stepper)
-      for (uint8_t i = 0; i < G34_PROBE_COUNT; ++i) {
+      for (uint8_t izstepper = 0; izstepper < Z_STEPPER_COUNT; ++izstepper) {
         // iteration odd/even --> downward / upward stepper sequence
-        const uint8_t iprobe = (iteration & 1) ? G34_PROBE_COUNT - 1 - i : i;
+        const uint8_t zstepper = (iteration & 1) ? Z_STEPPER_COUNT - 1 - izstepper : izstepper;
 
         // Safe clearance even on an incline
-        if (iteration == 0 || i > 0) do_blocking_move_to_z(z_probe);
+        if (iteration == 0 || izstepper > 0) do_blocking_move_to_z(z_probe);
 
         // Probe a Z height for each stepper.
-        const float z_probed_height = probe_at_point(z_auto_align_pos[i], raise_after, 0, true);
+        const float z_probed_height = probe_at_point(z_auto_align_pos[zstepper], raise_after, 0, true);
         if (isnan(z_probed_height)) {
           SERIAL_ECHOLNPGM("Probing failed.");
           err_break = true;
@@ -203,58 +180,35 @@ void GcodeSuite::G34() {
 
         // Add height to each value, to provide a more useful target height for
         // the next iteration of probing. This allows adjustments to be made away from the bed.
-        z_measured[iprobe] = z_probed_height + Z_CLEARANCE_BETWEEN_PROBES;
+        z_measured[zstepper] = z_probed_height + Z_CLEARANCE_BETWEEN_PROBES;
 
-        if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", int(iprobe + 1), " measured position is ", z_measured[iprobe]);
+        if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("> Z", int(zstepper + 1), " measured position is ", z_measured[zstepper]);
 
         // Remember the minimum measurement to calculate the correction later on
-        z_measured_min = _MIN(z_measured_min, z_measured[iprobe]);
-        z_measured_max = _MAX(z_measured_max, z_measured[iprobe]);
-      } // for (i)
+        z_measured_min = _MIN(z_measured_min, z_measured[zstepper]);
+      } // for (zstepper)
 
       if (err_break) break;
 
       // Adapt the next probe clearance height based on the new measurements.
       // Safe_height = lowest distance to bed (= highest measurement) plus highest measured misalignment.
-      z_maxdiff = z_measured_max - z_measured_min;
-      z_probe = Z_BASIC_CLEARANCE + z_measured_max + z_maxdiff;
-
-      #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-        // Replace the initial values in z_measured with calculated heights at
-        // each stepper position. This allows the adjustment algorithm to be
-        // shared between both possible probing mechanisms.
-
-        // This must be done after the next z_probe height is calculated, so that
-        // the height is calculated from actual print area positions, and not
-        // extrapolated motor movements.
-
-        // Compute the least-squares fit for all probed points.
-        // Calculate the Z position of each stepper and store it in z_measured.
-        // This allows the actual adjustment logic to be shared by both algorithms.
-        linear_fit_data lfd;
-        incremental_LSF_reset(&lfd);
-        for (uint8_t i = 0; i < G34_PROBE_COUNT; ++i) {
-          SERIAL_ECHOLNPAIR("PROBEPT_", int(i + 1), ": ", z_measured[i]);
-          incremental_LSF(&lfd, z_auto_align_pos[i], z_measured[i]);
-        }
-        finish_incremental_LSF(&lfd);
-
-        z_measured_min = 100000.0f;
-        for (uint8_t i = 0; i < Z_STEPPER_COUNT; ++i) {
-          z_measured[i] = -(lfd.A * z_stepper_pos[i].x + lfd.B * z_stepper_pos[i].y);
-          z_measured_min = _MIN(z_measured_min, z_measured[i]);
-        }
-
-        SERIAL_ECHOLNPAIR("CALCULATED STEPPER POSITIONS: Z1=", z_measured[0], " Z2=", z_measured[1], " Z3=", z_measured[2]);
+      #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
+        z_maxdiff = _MAX(ABS(z_measured[0] - z_measured[1]), ABS(z_measured[1] - z_measured[2]), ABS(z_measured[2] - z_measured[0]));
+        z_probe = Z_BASIC_CLEARANCE + _MAX(z_measured[0], z_measured[1], z_measured[2]) + z_maxdiff;
+      #else
+        z_maxdiff = ABS(z_measured[0] - z_measured[1]);
+        z_probe = Z_BASIC_CLEARANCE + _MAX(z_measured[0], z_measured[1]) + z_maxdiff;
       #endif
 
-      SERIAL_ECHOLNPAIR("\n"
+      SERIAL_ECHOPAIR("\n"
         "DIFFERENCE Z1-Z2=", ABS(z_measured[0] - z_measured[1])
         #if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
           , " Z2-Z3=", ABS(z_measured[1] - z_measured[2])
           , " Z3-Z1=", ABS(z_measured[2] - z_measured[0])
         #endif
       );
+      SERIAL_EOL();
+      SERIAL_EOL();
 
       // The following correction actions are to be enabled for select Z-steppers only
       stepper.set_separate_multi_axis(true);
@@ -266,10 +220,8 @@ void GcodeSuite::G34() {
         const float z_align_move = z_measured[zstepper] - z_measured_min,
                     z_align_abs = ABS(z_align_move);
 
-        #if DISABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-          // Optimize one iteration's correction based on the first measurements
-          if (z_align_abs > 0.0f) amplification = iteration == 1 ? _MIN(last_z_align_move[zstepper] / z_align_abs, 2.0f) : z_auto_align_amplification;
-        #endif
+        // Optimize one iterations correction based on the first measurements
+        if (z_align_abs > 0.0f) amplification = iteration == 1 ? _MIN(last_z_align_move[zstepper] / z_align_abs, 2.0f) : z_auto_align_amplification;
 
         // Check for less accuracy compared to last move
         if (last_z_align_move[zstepper] < z_align_abs - 1.0) {
@@ -314,6 +266,7 @@ void GcodeSuite::G34() {
 
     SERIAL_ECHOLNPAIR("Did ", int(iteration + (iteration != z_auto_align_iterations)), " iterations of ", int(z_auto_align_iterations));
     SERIAL_ECHOLNPAIR_F("Accuracy: ", z_maxdiff);
+    SERIAL_EOL();
 
     // Restore the active tool after homing
     #if HOTENDS > 1
@@ -346,97 +299,31 @@ void GcodeSuite::G34() {
 }
 
 /**
- * M422: Set a Z-Stepper automatic alignment XY point.
- *       Use repeatedly to set multiple points.
- *
- *   S<index> : Index of the probe point to set
- *
- * With Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS:
- *   W<index> : Index of the Z stepper position to set
- *              The W and S parameters may not be combined.
- *
- * S and W require an X and/or Y parameter
- *   X<pos>   : X position to set (Unchanged if omitted)
- *   Y<pos>   : Y position to set (Unchanged if omitted)
+ * M422: Z-Stepper automatic alignment parameter selection
  */
 void GcodeSuite::M422() {
-  if (!parser.seen_any()) {
-    for (uint8_t i = 0; i < G34_PROBE_COUNT; ++i)
-      SERIAL_ECHOLNPAIR("M422 S", i + 1, " X", z_auto_align_pos[i].x, " Y", z_auto_align_pos[i].y);
-    #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-      for (uint8_t i = 0; i < Z_STEPPER_COUNT; ++i)
-        SERIAL_ECHOLNPAIR("M422 W", i + 1, " X", z_stepper_pos[i].x, " Y", z_stepper_pos[i].y);
-    #endif
+  const int8_t zstepper = parser.intval('S') - 1;
+  if (!WITHIN(zstepper, 0, Z_STEPPER_COUNT - 1)) {
+    SERIAL_ECHOLNPGM("?(S) Z-Stepper index invalid.");
     return;
   }
 
-  const bool is_probe_point = parser.seen('S');
-
-  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-    if (is_probe_point && parser.seen('W')) {
-      SERIAL_ECHOLNPGM("?(S) and (W) may not be combined.");
-      return;
-    }
-  #endif
-
-  xy_pos_t *pos_dest = (
-    #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-      !is_probe_point ? z_stepper_pos :
-    #endif
-    z_auto_align_pos
-  );
-
-  if (!is_probe_point
-    #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-      && !parser.seen('W')
-    #endif
-  ) {
-    SERIAL_ECHOLNPGM(
-      #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-        "?(S) or (W) is required."
-      #else
-        "?(S) is required."
-      #endif
-    );
-    return;
-  }
-
-  // Get the Probe Position Index or Z Stepper Index
-  int8_t position_index;
-  if (is_probe_point) {
-    position_index = parser.intval('S') - 1;
-    if (!WITHIN(position_index, 0, int8_t(G34_PROBE_COUNT) - 1)) {
-      SERIAL_ECHOLNPGM("?(S) Z-ProbePosition index invalid.");
-      return;
-    }
-  }
-  else {
-    #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-      position_index = parser.intval('W') - 1;
-      if (!WITHIN(position_index, 0, Z_STEPPER_COUNT - 1)) {
-        SERIAL_ECHOLNPGM("?(W) Z-Stepper index invalid.");
-        return;
-      }
-    #endif
-  }
-
   const xy_pos_t pos = {
-    parser.floatval('X', pos_dest[position_index].x),
-    parser.floatval('Y', pos_dest[position_index].y)
+    parser.floatval('X', z_auto_align_pos[zstepper].x),
+    parser.floatval('Y', z_auto_align_pos[zstepper].y)
   };
 
-  if (is_probe_point) {
-    if (!position_is_reachable_by_probe(pos.x, Y_CENTER)) {
-      SERIAL_ECHOLNPGM("?(X) out of bounds.");
-      return;
-    }
-    if (!position_is_reachable_by_probe(pos)) {
-      SERIAL_ECHOLNPGM("?(Y) out of bounds.");
-      return;
-    }
+  if (!WITHIN(pos.x, X_MIN_POS, X_MAX_POS)) {
+    SERIAL_ECHOLNPGM("?(X) out of bounds.");
+    return;
   }
 
-  pos_dest[position_index] = pos;
+  if (!WITHIN(pos.y, Y_MIN_POS, Y_MAX_POS)) {
+    SERIAL_ECHOLNPGM("?(Y) out of bounds.");
+    return;
+  }
+
+  z_auto_align_pos[zstepper] = pos;
 }
 
 #endif // Z_STEPPER_AUTO_ALIGN

Marlin/src/gcode/calibrate/M48.cpp

@@ -126,7 +126,7 @@ void GcodeSuite::M48() {
     for (uint8_t n = 0; n < n_samples; n++) {
       #if HAS_SPI_LCD
         // Display M48 progress in the status bar
-        ui.status_printf_P(0, PSTR(S_FMT ": %d/%d"), GET_TEXT(MSG_M48_POINT), int(n + 1), int(n_samples));
+        ui.status_printf_P(0, PSTR(MSG_M48_POINT ": %d/%d"), int(n + 1), int(n_samples));
       #endif
       if (n_legs) {
         const int dir = (random(0, 10) > 5.0) ? -1 : 1;  // clockwise or counter clockwise
@@ -252,7 +252,7 @@ void GcodeSuite::M48() {
     #if HAS_SPI_LCD
       // Display M48 results in the status bar
       char sigma_str[8];
-      ui.status_printf_P(0, PSTR(S_FMT ": %s"), GET_TEXT(MSG_M48_DEVIATION), dtostrf(sigma, 2, 6, sigma_str));
+      ui.status_printf_P(0, PSTR(MSG_M48_DEVIATION ": %s"), dtostrf(sigma, 2, 6, sigma_str));
     #endif
   }
 

Marlin/src/gcode/calibrate/M852.cpp

@@ -93,13 +93,13 @@ void GcodeSuite::M852() {
 
   if (!ijk) {
     SERIAL_ECHO_START();
-    serialprintPGM(GET_TEXT(MSG_SKEW_FACTOR));
-    SERIAL_ECHOPAIR_F(" XY: ", planner.skew_factor.xy, 6);
+    SERIAL_ECHOLNPAIR_F(MSG_SKEW_FACTOR " XY: ", planner.skew_factor.xy, 6);
     #if ENABLED(SKEW_CORRECTION_FOR_Z)
-      SERIAL_ECHOPAIR_F(" XZ: ", planner.skew_factor.xz, 6);
-      SERIAL_ECHOPAIR_F(" YZ: ", planner.skew_factor.yz, 6);
+      SERIAL_ECHOPAIR(" XZ: ", planner.skew_factor.xz);
+      SERIAL_ECHOLNPAIR(" YZ: ", planner.skew_factor.yz);
+    #else
+      SERIAL_EOL();
     #endif
-    SERIAL_EOL();
   }
 }
 

Marlin/src/gcode/config/M200-M205.cpp

@@ -117,10 +117,10 @@ void GcodeSuite::M204() {
  *    Y = Max Y Jerk (units/sec^2)
  *    Z = Max Z Jerk (units/sec^2)
  *    E = Max E Jerk (units/sec^2)
- *    J = Junction Deviation (mm) (If not using CLASSIC_JERK)
+ *    J = Junction Deviation (mm) (Requires JUNCTION_DEVIATION)
  */
 void GcodeSuite::M205() {
-  #if DISABLED(CLASSIC_JERK)
+  #if ENABLED(JUNCTION_DEVIATION)
     #define J_PARAM  "J"
   #else
     #define J_PARAM
@@ -136,7 +136,7 @@ void GcodeSuite::M205() {
   if (parser.seen('B')) planner.settings.min_segment_time_us = parser.value_ulong();
   if (parser.seen('S')) planner.settings.min_feedrate_mm_s = parser.value_linear_units();
   if (parser.seen('T')) planner.settings.min_travel_feedrate_mm_s = parser.value_linear_units();
-  #if DISABLED(CLASSIC_JERK)
+  #if ENABLED(JUNCTION_DEVIATION)
     if (parser.seen('J')) {
       const float junc_dev = parser.value_linear_units();
       if (WITHIN(junc_dev, 0.01f, 0.3f)) {
@@ -159,7 +159,7 @@ void GcodeSuite::M205() {
           SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses.");
       #endif
     }
-    #if HAS_CLASSIC_E_JERK
+    #if !BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
       if (parser.seen('E')) planner.set_max_jerk(E_AXIS, parser.value_linear_units());
     #endif
   #endif

Marlin/src/gcode/config/M43.cpp

@@ -334,7 +334,7 @@ void GcodeSuite::M43() {
         host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M43 Wait Called"), PSTR("Continue"));
       #endif
       #if ENABLED(EXTENSIBLE_UI)
-        ExtUI::onUserConfirmRequired_P(PSTR("M43 Wait Called"));
+        ExtUI::onUserConfirmRequired(PSTR("M43 Wait Called"));
       #endif
     #endif
 

Marlin/src/gcode/config/M92.cpp

@@ -76,7 +76,7 @@ void GcodeSuite::M92() {
         const float value = parser.value_per_axis_units((AxisEnum)(E_AXIS_N(target_extruder)));
         if (value < 20) {
           float factor = planner.settings.axis_steps_per_mm[E_AXIS_N(target_extruder)] / value; // increase e constants if M92 E14 is given for netfab.
-          #if HAS_CLASSIC_E_JERK
+          #if HAS_CLASSIC_JERK && !BOTH(JUNCTION_DEVIATION, LIN_ADVANCE)
             planner.max_jerk.e *= factor;
           #endif
           planner.settings.max_feedrate_mm_s[E_AXIS_N(target_extruder)] *= factor;

Marlin/src/gcode/control/M108_M112_M410.cpp

@@ -41,7 +41,7 @@ void GcodeSuite::M108() {
  * M112: Full Shutdown
  */
 void GcodeSuite::M112() {
-  kill(PSTR("M112 Shutdown"), nullptr, true);
+  kill(PSTR("M112 Shutdown"), true);
 }
 
 /**

Marlin/src/gcode/control/M3-M5.cpp

@@ -29,20 +29,10 @@
 #include "../../module/stepper.h"
 
 /**
- * Laser:
+ *  M3 - Cutter ON (Clockwise)
+ *  M4 - Cutter ON (Counter-clockwise)
  *
- *  M3 - Laser ON/Power (Ramped power)
- *  M4 - Laser ON/Power (Continuous power)
- *
- *    S<power> - Set power. S0 will turn the laser off.
- *    O<ocr>   - Set power and OCR
- *
- * Spindle:
- *
- *  M3 - Spindle ON (Clockwise)
- *  M4 - Spindle ON (Counter-clockwise)
- *
- *    S<power> - Set power. S0 will turn the spindle off.
+ *    S<power> - Set power. S0 turns it off.
  *    O<ocr>   - Set power and OCR
  *
  *  If no PWM pin is defined then M3/M4 just turns it on.
@@ -71,14 +61,12 @@
  */
 void GcodeSuite::M3_M4(const bool is_M4) {
 
-  #if ENABLED(SPINDLE_FEATURE)
-    planner.synchronize();   // Wait for movement to complete before changing power
-  #endif
+  planner.synchronize();   // Wait for previous movement commands (G0/G0/G2/G3) to complete before changing power
 
   cutter.set_direction(is_M4);
 
   #if ENABLED(SPINDLE_LASER_PWM)
-    if (parser.seenval('O'))
+    if (parser.seen('O'))
       cutter.set_ocr_power(parser.value_byte()); // The OCR is a value from 0 to 255 (uint8_t)
     else
       cutter.set_power(parser.intval('S', 255));
@@ -91,9 +79,7 @@ void GcodeSuite::M3_M4(const bool is_M4) {
  * M5 - Cutter OFF
  */
 void GcodeSuite::M5() {
-  #if ENABLED(SPINDLE_FEATURE)
-    planner.synchronize();
-  #endif
+  planner.synchronize();
   cutter.set_enabled(false);
 }
 

Marlin/src/gcode/control/M80_M81.cpp

@@ -35,7 +35,7 @@
   #include "../../Marlin.h"
 #endif
 
-#if ENABLED(PSU_CONTROL)
+#if HAS_POWER_SWITCH
 
   #if ENABLED(AUTO_POWER_CONTROL)
     #include "../../feature/power.h"
@@ -81,7 +81,7 @@
     #endif
   }
 
-#endif // ENABLED(PSU_CONTROL)
+#endif // HAS_POWER_SWITCH
 
 /**
  * M81: Turn off Power, including Power Supply, if there is one.
@@ -105,11 +105,11 @@ void GcodeSuite::M81() {
 
   #if HAS_SUICIDE
     suicide();
-  #elif ENABLED(PSU_CONTROL)
+  #elif HAS_POWER_SWITCH
     PSU_OFF();
   #endif
 
   #if HAS_LCD_MENU
-    LCD_MESSAGEPGM_P(PSTR(MACHINE_NAME " " MSG_OFF "."));
+    LCD_MESSAGEPGM(MACHINE_NAME " " MSG_OFF ".");
   #endif
 }

Marlin/src/gcode/feature/cancel/M486.cpp

@@ -1,57 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include "../../../inc/MarlinConfig.h"
-
-#if ENABLED(CANCEL_OBJECTS)
-
-#include "../../gcode.h"
-#include "../../../feature/cancel_object.h"
-
-/**
- * M486: A simple interface to cancel objects
- *
- *   T[count] : Reset objects and/or set the count
- *   S<index> : Start an object with the given index
- *   P<index> : Cancel the object with the given index
- *   U<index> : Un-cancel object with the given index
- *   C        : Cancel the current object (the last index given by S<index>)
- *   S-1      : Start a non-object like a brim or purge tower that should always print
- */
-void GcodeSuite::M486() {
-
-  if (parser.seen('T')) {
-    cancelable.reset();
-    cancelable.object_count = parser.intval('T', 1);
-  }
-
-  if (parser.seen('S'))
-    cancelable.set_active_object(parser.value_int());
-
-  if (parser.seen('C')) cancelable.cancel_active_object();
-
-  if (parser.seen('P')) cancelable.cancel_object(parser.value_int());
-
-  if (parser.seen('U')) cancelable.uncancel_object(parser.value_int());
-}
-
-#endif // CANCEL_OBJECTS

Marlin/src/gcode/feature/digipot/M907-M910.cpp

@@ -65,10 +65,8 @@ void GcodeSuite::M907() {
   #if ENABLED(DIGIPOT_I2C)
     // this one uses actual amps in floating point
     LOOP_XYZE(i) if (parser.seenval(axis_codes[i])) digipot_i2c_set_current(i, parser.value_float());
-    // Additional extruders use B,C,D for channels 4,5,6.
-    // TODO: Change these parameters because 'E' is used. B<index>?
-    for (uint8_t i = E_AXIS + 1; i < DIGIPOT_I2C_NUM_CHANNELS; i++)
-      if (parser.seenval('B' + i - (E_AXIS + 1))) digipot_i2c_set_current(i, parser.value_float());
+    // for each additional extruder (named B,C,D,E..., channels 4,5,6,7...)
+    for (uint8_t i = NUM_AXIS; i < DIGIPOT_I2C_NUM_CHANNELS; i++) if (parser.seenval('B' + i - (NUM_AXIS))) digipot_i2c_set_current(i, parser.value_float());
   #endif
 
   #if ENABLED(DAC_STEPPER_CURRENT)

Marlin/src/gcode/feature/leds/M7219.cpp

@@ -71,7 +71,7 @@ void GcodeSuite::M7219() {
   }
   else if (parser.seen('D')) {
     const uint8_t uline = parser.value_byte() & 0x7,
-                  line = uline + (parser.byteval('U') << 3);
+                  line = uline + parser.byteval('U') << 3;
     if (line < MAX7219_LINES) {
       max7219.led_line[line] = v;
       return max7219.refresh_line(line);

Marlin/src/gcode/gcode.cpp

@@ -45,10 +45,6 @@ GcodeSuite gcode;
   #include "../feature/power_loss_recovery.h"
 #endif
 
-#if ENABLED(CANCEL_OBJECTS)
-  #include "../feature/cancel_object.h"
-#endif
-
 #include "../Marlin.h" // for idle() and suspend_auto_report
 
 millis_t GcodeSuite::previous_move_ms;
@@ -118,34 +114,15 @@ int8_t GcodeSuite::get_target_e_stepper_from_command() {
  */
 void GcodeSuite::get_destination_from_command() {
   xyze_bool_t seen = { false, false, false, false };
-
-  #if ENABLED(CANCEL_OBJECTS)
-    const bool &skip_move = cancelable.skipping;
-  #else
-    constexpr bool skip_move = false;
-  #endif
-
-  // Get new XYZ position, whether absolute or relative
-  LOOP_XYZ(i) {
+  LOOP_XYZE(i) {
     if ( (seen[i] = parser.seenval(axis_codes[i])) ) {
       const float v = parser.value_axis_units((AxisEnum)i);
-      if (skip_move)
-        destination[i] = current_position[i];
-      else
-        destination[i] = axis_is_relative(AxisEnum(i)) ? current_position[i] + v : LOGICAL_TO_NATIVE(v, i);
+      destination[i] = axis_is_relative(AxisEnum(i)) ? current_position[i] + v : (i == E_AXIS) ? v : LOGICAL_TO_NATIVE(v, i);
     }
     else
       destination[i] = current_position[i];
   }
 
-  // Get new E position, whether absolute or relative
-  if ( (seen.e = parser.seenval('E')) ) {
-    const float v = parser.value_axis_units(E_AXIS);
-    destination.e = axis_is_relative(E_AXIS) ? current_position.e + v : v;
-  }
-  else
-    destination.e = current_position.e;
-
   #if ENABLED(POWER_LOSS_RECOVERY) && !PIN_EXISTS(POWER_LOSS)
     // Only update power loss recovery on moves with E
     if (recovery.enabled && IS_SD_PRINTING() && seen.e && (seen.x || seen.y))
@@ -156,7 +133,7 @@ void GcodeSuite::get_destination_from_command() {
     feedrate_mm_s = parser.value_feedrate();
 
   #if ENABLED(PRINTCOUNTER)
-    if (!DEBUGGING(DRYRUN) && !skip_move)
+    if (!DEBUGGING(DRYRUN))
       print_job_timer.incFilamentUsed(destination.e - current_position.e);
   #endif
 
@@ -345,7 +322,6 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
     break;
 
     case 'M': switch (parser.codenum) {
-
       #if HAS_RESUME_CONTINUE
         case 0:                                                   // M0: Unconditional stop - Wait for user button press on LCD
         case 1: M0_M1(); break;                                   // M1: Conditional stop - Wait for user button press on LCD
@@ -470,7 +446,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
 
       #if HAS_HEATED_CHAMBER
         case 141: M141(); break;                                  // M141: Set chamber temperature
-        case 191: M191(); break;                                  // M191: Wait for chamber temperature to reach target
+        //case 191: M191(); break;                                // M191: Wait for chamber temperature to reach target
       #endif
 
       #if ENABLED(AUTO_REPORT_TEMPERATURES) && HAS_TEMP_SENSOR
@@ -495,7 +471,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         #endif
       #endif // BARICUDA
 
-      #if ENABLED(PSU_CONTROL)
+      #if HAS_POWER_SWITCH
         case 80: M80(); break;                                    // M80: Turn on Power Supply
       #endif
       case 81: M81(); break;                                      // M81: Turn off Power, including Power Supply, if possible
@@ -691,10 +667,6 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 428: M428(); break;                                  // M428: Apply current_position to home_offset
       #endif
 
-      #if ENABLED(CANCEL_OBJECTS)
-        case 486: M486(); break;                                  // M486: Identify and cancel objects
-      #endif
-
       case 500: M500(); break;                                    // M500: Store settings in EEPROM
       case 501: M501(); break;                                    // M501: Read settings from EEPROM
       case 502: M502(); break;                                    // M502: Revert to default settings

Marlin/src/gcode/gcode.h

@@ -213,7 +213,6 @@
  * M422 - Set Z Stepper automatic alignment position using probe. X<units> Y<units> A<axis> (Requires Z_STEPPER_AUTO_ALIGN)
  * M425 - Enable/Disable and tune backlash correction. (Requires BACKLASH_COMPENSATION and BACKLASH_GCODE)
  * M428 - Set the home_offset based on the current_position. Nearest edge applies. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
- * M486 - Identify and cancel objects. (Requires CANCEL_OBJECTS)
  * M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
  * M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
  * M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
@@ -549,7 +548,7 @@ private:
     static void M78();
   #endif
 
-  #if ENABLED(PSU_CONTROL)
+  #if HAS_POWER_SWITCH
     static void M80();
   #endif
 
@@ -621,7 +620,7 @@ private:
 
   #if HAS_HEATED_CHAMBER
     static void M141();
-    static void M191();
+    //static void M191();
   #endif
 
   #if HOTENDS && HAS_LCD_MENU
@@ -797,10 +796,6 @@ private:
     static void M428();
   #endif
 
-  #if ENABLED(CANCEL_OBJECTS)
-    static void M486();
-  #endif
-
   static void M500();
   static void M501();
   static void M502();

Marlin/src/gcode/geometry/G92.cpp

@@ -33,7 +33,12 @@
  */
 void GcodeSuite::G92() {
 
-  bool sync_E = false, sync_XYZ = false;
+  bool didE = false;
+  #if IS_SCARA || !HAS_POSITION_SHIFT
+    bool didXYZ = false;
+  #else
+    constexpr bool didXYZ = false;
+  #endif
 
   #if USE_GCODE_SUBCODES
     const uint8_t subcode_G92 = parser.subcode;
@@ -59,7 +64,11 @@ void GcodeSuite::G92() {
         LOOP_XYZE(i) {
           if (parser.seenval(axis_codes[i])) {
             current_position[i] = parser.value_axis_units((AxisEnum)i);
-            if (i == E_AXIS) sync_E = true; else sync_XYZ = true;
+            #if IS_SCARA || !HAS_POSITION_SHIFT
+              if (i == E_AXIS) didE = true; else didXYZ = true;
+            #elif HAS_POSITION_SHIFT
+              if (i == E_AXIS) didE = true;
+            #endif
           }
         }
       } break;
@@ -72,11 +81,11 @@ void GcodeSuite::G92() {
                       d = v - current_position[i];
           if (!NEAR_ZERO(d)) {
             #if IS_SCARA || !HAS_POSITION_SHIFT
-              if (i == E_AXIS) sync_E = true; else sync_XYZ = true;
+              if (i == E_AXIS) didE = true; else didXYZ = true;
               current_position[i] = v;        // Without workspaces revert to Marlin 1.0 behavior
             #elif HAS_POSITION_SHIFT
               if (i == E_AXIS) {
-                sync_E = true;
+                didE = true;
                 current_position.e = v; // When using coordinate spaces, only E is set directly
               }
               else {
@@ -96,8 +105,8 @@ void GcodeSuite::G92() {
       coordinate_system[active_coordinate_system] = position_shift;
   #endif
 
-  if    (sync_XYZ) sync_plan_position();
-  else if (sync_E) sync_plan_position_e();
+  if    (didXYZ) sync_plan_position();
+  else if (didE) sync_plan_position_e();
 
   report_current_position();
 }

Marlin/src/gcode/geometry/M206_M428.cpp

@@ -70,7 +70,7 @@ void GcodeSuite::M428() {
       diff[i] = -current_position[i];
     if (!WITHIN(diff[i], -20, 20)) {
       SERIAL_ERROR_MSG(MSG_ERR_M428_TOO_FAR);
-      LCD_ALERTMESSAGEPGM_P(PSTR("Err: Too far!"));
+      LCD_ALERTMESSAGEPGM("Err: Too far!");
       BUZZ(200, 40);
       return;
     }

Marlin/src/gcode/host/M115.cpp

@@ -112,7 +112,7 @@ void GcodeSuite::M115() {
 
     // SOFTWARE_POWER (M80, M81)
     cap_line(PSTR("SOFTWARE_POWER")
-      #if ENABLED(PSU_CONTROL)
+      #if HAS_POWER_SWITCH
         , true
       #endif
     );

Marlin/src/gcode/host/M16.cpp

@@ -33,7 +33,7 @@
 void GcodeSuite::M16() {
 
   if (strcmp_P(parser.string_arg, PSTR(MACHINE_NAME)))
-    kill(GET_TEXT(MSG_EXPECTED_PRINTER));
+    kill(PSTR(MSG_EXPECTED_PRINTER));
 
 }
 

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -80,10 +80,7 @@ void GcodeSuite::M0_M1() {
 
   #elif ENABLED(EXTENSIBLE_UI)
 
-    if (has_message)
-      ExtUI::onUserConfirmRequired(args); // Can this take an SRAM string??
-    else
-      ExtUI::onUserConfirmRequired_P(GET_TEXT(MSG_USERWAIT));
+    ExtUI::onUserConfirmRequired(has_message ? args : MSG_USERWAIT); // SRAM string
 
   #else
 
@@ -101,7 +98,7 @@ void GcodeSuite::M0_M1() {
     host_prompt_do(PROMPT_USER_CONTINUE, PSTR("M0/1 Break Called"), PSTR("Continue"));
   #endif
   #if ENABLED(EXTENSIBLE_UI)
-    ExtUI::onUserConfirmRequired_P(PSTR("M0/1 Break Called"));
+    ExtUI::onUserConfirmRequired(PSTR("M0/1 Break Called"));
   #endif
 
   if (ms > 0) {

Marlin/src/gcode/lcd/M73.cpp

@@ -38,11 +38,8 @@
  *   This has no effect during an SD print job
  */
 void GcodeSuite::M73() {
-  if (parser.seen('P'))
-    ui.set_progress((PROGRESS_SCALE) > 1
-      ? parser.value_float() * (PROGRESS_SCALE)
-      : parser.value_byte()
-    );
+  if (parser.seen('P') && !IS_SD_PRINTING())
+    ui.set_progress(parser.value_byte());
 }
 
 #endif // LCD_SET_PROGRESS_MANUALLY

Marlin/src/gcode/motion/G2_G3.cpp

@@ -59,8 +59,8 @@ void plan_arc(
     switch (gcode.workspace_plane) {
       default:
       case GcodeSuite::PLANE_XY: p_axis = X_AXIS; q_axis = Y_AXIS; l_axis = Z_AXIS; break;
-      case GcodeSuite::PLANE_YZ: p_axis = Y_AXIS; q_axis = Z_AXIS; l_axis = X_AXIS; break;
       case GcodeSuite::PLANE_ZX: p_axis = Z_AXIS; q_axis = X_AXIS; l_axis = Y_AXIS; break;
+      case GcodeSuite::PLANE_YZ: p_axis = Y_AXIS; q_axis = Z_AXIS; l_axis = X_AXIS; break;
     }
   #else
     constexpr AxisEnum p_axis = X_AXIS, q_axis = Y_AXIS, l_axis = Z_AXIS;
@@ -242,20 +242,19 @@ void plan_arc(
  * G2: Clockwise Arc
  * G3: Counterclockwise Arc
  *
- * This command has two forms: IJ-form (JK, KI) and R-form.
+ * This command has two forms: IJ-form and R-form.
  *
- *  - Depending on the current Workspace Plane orientation,
- *    use parameters IJ/JK/KI to specify the XY/YZ/ZX offsets.
- *    At least one of the IJ/JK/KI parameters is required.
- *    XY/YZ/ZX can be omitted to do a complete circle.
- *    The given XY/YZ/ZX is not error-checked. The arc ends
- *    based on the angle of the destination.
- *    Mixing IJ/JK/KI with R will throw an error.
+ *  - I specifies an X offset. J specifies a Y offset.
+ *    At least one of the IJ parameters is required.
+ *    X and Y can be omitted to do a complete circle.
+ *    The given XY is not error-checked. The arc ends
+ *     based on the angle of the destination.
+ *    Mixing I or J with R will throw an error.
  *
- *  - R specifies the radius. X or Y (Y or Z / Z or X) is required.
- *    Omitting both XY/YZ/ZX will throw an error.
- *    XY/YZ/ZX must differ from the current XY/YZ/ZX.
- *    Mixing R with IJ/JK/KI will throw an error.
+ *  - R specifies the radius. X or Y is required.
+ *    Omitting both X and Y will throw an error.
+ *    X or Y must differ from the current XY.
+ *    Mixing R with I or J will throw an error.
  *
  *  - P specifies the number of full circles to do
  *    before the specified arc move.
@@ -285,30 +284,18 @@ void GcodeSuite::G2_G3(const bool clockwise) {
       if (r) {
         const xy_pos_t p1 = current_position, p2 = destination;
         if (p1 != p2) {
-          const xy_pos_t d2 = (p2 - p1) * 0.5f;          // XY vector to midpoint of move from current
-          const float e = clockwise ^ (r < 0) ? -1 : 1,  // clockwise -1/1, counterclockwise 1/-1
-                      len = d2.magnitude(),              // Distance to mid-point of move from current
-                      h2 = (r - len) * (r + len),        // factored to reduce rounding error
-                      h = (h2 >= 0) ? SQRT(h2) : 0.0f;   // Distance to the arc pivot-point from midpoint
-          const xy_pos_t s = { -d2.y, d2.x };            // Perpendicular bisector. (Divide by len for unit vector.)
-          arc_offset = d2 + s / len * e * h;             // The calculated offset (mid-point if |r| <= len)
+          const xy_pos_t d = p2 - p1, m = (p1 + p2) * 0.5f;   // XY distance and midpoint
+          const float e = clockwise ^ (r < 0) ? -1 : 1,       // clockwise -1/1, counterclockwise 1/-1
+                      len = d.magnitude(),                    // Total move length
+                      h = SQRT(sq(r) - sq(len * 0.5f));       // Distance to the arc pivot-point
+          const xy_pos_t s = { d.x, -d.y };                   // Inverse Slope of the perpendicular bisector
+          arc_offset = m + s * RECIPROCAL(len) * e * h - p1;  // The calculated offset
         }
       }
     }
     else {
-      #if ENABLED(CNC_WORKSPACE_PLANES)
-        char achar, bchar;
-        switch (gcode.workspace_plane) {
-          default:
-          case GcodeSuite::PLANE_XY: achar = 'I'; bchar = 'J'; break;
-          case GcodeSuite::PLANE_YZ: achar = 'J'; bchar = 'K'; break;
-          case GcodeSuite::PLANE_ZX: achar = 'K'; bchar = 'I'; break;
-        }
-      #else
-        constexpr char achar = 'I', bchar = 'J';
-      #endif
-      if (parser.seenval(achar)) arc_offset.a = parser.value_linear_units();
-      if (parser.seenval(bchar)) arc_offset.b = parser.value_linear_units();
+      if (parser.seenval('I')) arc_offset.a = parser.value_linear_units();
+      if (parser.seenval('J')) arc_offset.b = parser.value_linear_units();
     }
 
     if (arc_offset) {

Marlin/src/gcode/motion/M290.cpp

@@ -124,7 +124,7 @@ void GcodeSuite::M290() {
           " X", babystep.axis_total[X_AXIS],
           " Y", babystep.axis_total[Y_AXIS],
         #endif
-        " Z", babystep.axis_total[BS_TODO_AXIS(Z_AXIS)]
+        " Z", babystep.axis_total[Z_AXIS]
       );
     }
     #endif

Marlin/src/gcode/parser.cpp

@@ -138,9 +138,7 @@ void GCodeParser::parse(char *p) {
   switch (letter) {
 
     case 'G': case 'M': case 'T':
-    #if ENABLED(CANCEL_OBJECTS)
-      case 'O':
-    #endif
+
       // Skip spaces to get the numeric part
       while (*p == ' ') p++;
 
@@ -232,14 +230,7 @@ void GCodeParser::parse(char *p) {
     case 23: case 28: case 30: case 117: case 118: case 928: string_arg = p; return;
     default: break;
   }
-/*
-  #if ENABLED(CANCEL_OBJECTS)
-  if (letter == 'O') switch (codenum) {
-    case 1:  string_arg = p; return;
-    default: break;
-  }
-  #endif
-*/
+
   #if ENABLED(DEBUG_GCODE_PARSER)
     const bool debug = codenum == 800;
   #endif

Marlin/src/gcode/sdcard/M24_M25.cpp

@@ -42,8 +42,6 @@
   #include "../../feature/power_loss_recovery.h"
 #endif
 
-#include "../../Marlin.h" // for startOrResumeJob
-
 /**
  * M24: Start or Resume SD Print
  */
@@ -56,14 +54,14 @@ void GcodeSuite::M24() {
 
   #if ENABLED(PARK_HEAD_ON_PAUSE)
     if (did_pause_print) {
-      resume_print(); // will call print_job_timer.start()
+      resume_print();
       return;
     }
   #endif
 
   if (card.isFileOpen()) {
-    card.startFileprint();            // SD card will now be read for commands
-    startOrResumeJob();               // Start (or resume) the print job timer
+    card.startFileprint();
+    print_job_timer.start();
     #if ENABLED(POWER_LOSS_RECOVERY)
       recovery.prepare();
     #endif

Marlin/src/gcode/sdcard/M32.cpp

@@ -29,8 +29,6 @@
 #include "../../module/printcounter.h"
 #include "../../module/planner.h"
 
-#include "../../Marlin.h" // for startOrResumeJob
-
 /**
  * M32: Select file and start SD Print
  *
@@ -54,7 +52,7 @@ void GcodeSuite::M32() {
     card.startFileprint();
 
     // Procedure calls count as normal print time.
-    if (!call_procedure) startOrResumeJob();
+    if (!call_procedure) print_job_timer.start();
   }
 }
 

Marlin/src/gcode/stats/M75-M78.cpp

@@ -24,13 +24,11 @@
 #include "../../module/printcounter.h"
 #include "../../lcd/ultralcd.h"
 
-#include "../../Marlin.h" // for startOrResumeJob
-
 /**
  * M75: Start print timer
  */
 void GcodeSuite::M75() {
-  startOrResumeJob();
+  print_job_timer.start();
 }
 
 /**

Marlin/src/gcode/temperature/M104_M109.cpp

@@ -29,14 +29,10 @@
 #include "../../module/motion.h"
 #include "../../module/planner.h"
 #include "../../lcd/ultralcd.h"
-
-#include "../../Marlin.h" // for startOrResumeJob, etc.
+#include "../../Marlin.h"
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
   #include "../../module/printcounter.h"
-  #if ENABLED(CANCEL_OBJECTS)
-    #include "../../feature/cancel_object.h"
-  #endif
 #endif
 
 #if ENABLED(SINGLENOZZLE)
@@ -130,7 +126,7 @@ void GcodeSuite::M109() {
         ui.reset_status();
       }
       else
-        startOrResumeJob();
+        print_job_timer.start();
     #endif
 
     #if HAS_DISPLAY

Marlin/src/gcode/temperature/M105.cpp

@@ -31,21 +31,16 @@ void GcodeSuite::M105() {
   const int8_t target_extruder = get_target_extruder_from_command();
   if (target_extruder < 0) return;
 
-  SERIAL_ECHOPGM(MSG_OK);
-
   #if HAS_TEMP_SENSOR
-
+    SERIAL_ECHOPGM(MSG_OK);
     thermalManager.print_heater_states(target_extruder
       #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
         , parser.boolval('R')
       #endif
     );
-
-    SERIAL_EOL();
-
-  #else
-
-    SERIAL_ECHOLNPGM(" T:0"); // Some hosts send M105 to test the serial connection
-
+  #else // !HAS_TEMP_SENSOR
+    SERIAL_ERROR_MSG(MSG_ERR_NO_THERMISTORS);
   #endif
+
+  SERIAL_EOL();
 }

Marlin/src/gcode/temperature/M140_M190.cpp

@@ -37,7 +37,7 @@
   #include "../../feature/leds/leds.h"
 #endif
 
-#include "../../Marlin.h" // for wait_for_heatup, idle, startOrResumeJob
+#include "../../Marlin.h" // for wait_for_heatup and idle()
 
 /**
  * M140: Set bed temperature
@@ -59,12 +59,12 @@ void GcodeSuite::M190() {
     thermalManager.setTargetBed(parser.value_celsius());
     #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
       if (parser.value_celsius() > BED_MINTEMP)
-        startOrResumeJob();
+        print_job_timer.start();
     #endif
   }
   else return;
 
-  ui.set_status_P(thermalManager.isHeatingBed() ? GET_TEXT(MSG_BED_HEATING) : GET_TEXT(MSG_BED_COOLING));
+  ui.set_status_P(thermalManager.isHeatingBed() ? PSTR(MSG_BED_HEATING) : PSTR(MSG_BED_COOLING));
 
   thermalManager.wait_for_bed(no_wait_for_cooling);
 }

Marlin/src/gcode/temperature/M141_M191.cpp

@@ -27,6 +27,7 @@
 #include "../gcode.h"
 #include "../../module/temperature.h"
 
+/*
 #include "../../module/motion.h"
 #include "../../lcd/ultralcd.h"
 
@@ -38,7 +39,8 @@
   #include "../../feature/leds/leds.h"
 #endif
 
-#include "../../Marlin.h" // for wait_for_heatup, idle, startOrResumeJob
+#include "../../Marlin.h" // for wait_for_heatup and idle()
+*/
 
 /**
  * M141: Set chamber temperature
@@ -52,6 +54,7 @@ void GcodeSuite::M141() {
  * M191: Sxxx Wait for chamber current temp to reach target temp. Waits only when heating
  *       Rxxx Wait for chamber current temp to reach target temp. Waits when heating and cooling
  */
+/*
 void GcodeSuite::M191() {
   if (DEBUGGING(DRYRUN)) return;
 
@@ -60,16 +63,15 @@ void GcodeSuite::M191() {
     thermalManager.setTargetChamber(parser.value_celsius());
     #if ENABLED(PRINTJOB_TIMER_AUTOSTART)
       if (parser.value_celsius() > BED_MINTEMP)
-        startOrResumeJob();
+        print_job_timer.start();
     #endif
   }
   else return;
 
-  const bool is_heating = thermalManager.isHeatingChamber();
-  if (is_heating || !no_wait_for_cooling) {
-    lcd_setstatusPGM(is_heating ? GET_TEXT(MSG_CHAMBER_HEATING) : GET_TEXT(MSG_CHAMBER_COOLING));
-    thermalManager.wait_for_chamber(false);
-  }
+  lcd_setstatusPGM(thermalManager.isHeatingChamber() ? PSTR(MSG_CHAMBER_HEATING) : PSTR(MSG_CHAMBER_COOLING));
+
+  thermalManager.wait_for_chamber(no_wait_for_cooling);
 }
+*/
 
 #endif // HAS_HEATED_CHAMBER

Marlin/src/inc/Conditionals_LCD.h

@@ -120,7 +120,7 @@
   #define DOGLCD
   #define IS_ULTIPANEL
   #define LED_COLORS_REDUCE_GREEN
-  #if ENABLED(PSU_CONTROL) && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
+  #if HAS_POWER_SWITCH && EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1)
     #define LED_BACKLIGHT_TIMEOUT 10000
   #endif
 
@@ -416,6 +416,7 @@
 #if EITHER(SINGLENOZZLE, MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
   #undef HOTENDS
   #define HOTENDS       1
+  #undef TEMP_SENSOR_1_AS_REDUNDANT
   #undef HOTEND_OFFSET_X
   #undef HOTEND_OFFSET_Y
 #endif
@@ -500,8 +501,8 @@
 #define PROBE_SELECTED (HAS_BED_PROBE || EITHER(PROBE_MANUALLY, MESH_BED_LEVELING))
 
 #if HAS_BED_PROBE
-  #define HAS_CUSTOM_PROBE_PIN  DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-  #define HOMING_Z_WITH_PROBE   (Z_HOME_DIR < 0 && !HAS_CUSTOM_PROBE_PIN)
+  #define USES_Z_MIN_PROBE_ENDSTOP DISABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+  #define HOMING_Z_WITH_PROBE      (Z_HOME_DIR < 0 && !USES_Z_MIN_PROBE_ENDSTOP)
   #ifndef Z_PROBE_LOW_POINT
     #define Z_PROBE_LOW_POINT -5
   #endif
@@ -524,14 +525,13 @@
   #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
 #endif
 
-#define HAS_SOFTWARE_ENDSTOPS        EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-#define HAS_RESUME_CONTINUE          ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
-#define HAS_COLOR_LEDS               ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
-#define HAS_LEDS_OFF_FLAG            (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
-#define HAS_PRINT_PROGRESS           EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
-#define HAS_PRINT_PROGRESS_PERMYRIAD (HAS_PRINT_PROGRESS && EITHER(PRINT_PROGRESS_SHOW_DECIMALS, SHOW_REMAINING_TIME))
-#define HAS_SERVICE_INTERVALS        (ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0))
-#define HAS_FILAMENT_SENSOR          ENABLED(FILAMENT_RUNOUT_SENSOR)
+#define HAS_SOFTWARE_ENDSTOPS EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
+#define HAS_RESUME_CONTINUE   ANY(EXTENSIBLE_UI, NEWPANEL, EMERGENCY_PARSER)
+#define HAS_COLOR_LEDS        ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
+#define HAS_LEDS_OFF_FLAG     (BOTH(PRINTER_EVENT_LEDS, SDSUPPORT) && HAS_RESUME_CONTINUE)
+#define HAS_PRINT_PROGRESS    EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#define HAS_SERVICE_INTERVALS (ENABLED(PRINTCOUNTER) && (SERVICE_INTERVAL_1 > 0 || SERVICE_INTERVAL_2 > 0 || SERVICE_INTERVAL_3 > 0))
+#define HAS_FILAMENT_SENSOR   ENABLED(FILAMENT_RUNOUT_SENSOR)
 
 #define Z_MULTI_STEPPER_DRIVERS EITHER(Z_DUAL_STEPPER_DRIVERS, Z_TRIPLE_STEPPER_DRIVERS)
 #define Z_MULTI_ENDSTOPS        EITHER(Z_DUAL_ENDSTOPS, Z_TRIPLE_ENDSTOPS)
@@ -561,12 +561,6 @@
   #define BOOT_MARLIN_LOGO_SMALL
 #endif
 
-#define IS_RE_ARM_BOARD MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
+#define IS_RE_ARM_BOARD (MB(RAMPS_14_RE_ARM_EFB) || MB(RAMPS_14_RE_ARM_EEB) || MB(RAMPS_14_RE_ARM_EFF) || MB(RAMPS_14_RE_ARM_EEF) || MB(RAMPS_14_RE_ARM_SF))
 
 #define HAS_SDCARD_CONNECTION EITHER(TARGET_LPC1768, ADAFRUIT_GRAND_CENTRAL_M4)
-
-#define HAS_LINEAR_E_JERK (DISABLED(CLASSIC_JERK) && ENABLED(LIN_ADVANCE))
-
-#ifndef SPI_SPEED
-  #define SPI_SPEED SPI_FULL_SPEED
-#endif

Marlin/src/inc/Conditionals_post.h

@@ -43,8 +43,7 @@
   #define NOT_A_PIN 0 // For PINS_DEBUGGING
 #endif
 
-#define HAS_CLASSIC_JERK (ENABLED(CLASSIC_JERK) || IS_KINEMATIC)
-#define HAS_CLASSIC_E_JERK (HAS_CLASSIC_JERK && DISABLED(LIN_ADVANCE))
+#define HAS_CLASSIC_JERK (IS_KINEMATIC || DISABLED(JUNCTION_DEVIATION))
 
 /**
  * Axis lengths and center
@@ -221,6 +220,11 @@
   #ifndef Z_SAFE_HOMING_Y_POINT
     #define Z_SAFE_HOMING_Y_POINT _SAFE_POINT(Y)
   #endif
+  #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT
+  #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT
+#else
+  #define X_TILT_FULCRUM X_HOME_POS
+  #define Y_TILT_FULCRUM Y_HOME_POS
 #endif
 
 /**
@@ -333,6 +337,8 @@
   #endif
 #endif
 
+#define HAS_POWER_SWITCH (ENABLED(PSU_CONTROL) && PIN_EXISTS(PS_ON))
+
 /**
  * Temp Sensor defines
  */
@@ -823,12 +829,12 @@
 // Is an endstop plug used for the Z2 endstop or the bed probe?
 #define IS_Z2_OR_PROBE(A,M) ( \
      (Z_MULTI_ENDSTOPS && Z2_USE_ENDSTOP == _##A##M##_) \
-  || (HAS_CUSTOM_PROBE_PIN && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
+  || (USES_Z_MIN_PROBE_ENDSTOP && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
 
 // Is an endstop plug used for the Z3 endstop or the bed probe?
 #define IS_Z3_OR_PROBE(A,M) ( \
      (ENABLED(Z_TRIPLE_ENDSTOPS) && Z3_USE_ENDSTOP == _##A##M##_) \
-  || (HAS_CUSTOM_PROBE_PIN && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
+  || (USES_Z_MIN_PROBE_ENDSTOP && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
 
 /**
  * Set ENDSTOPPULLUPS for active endstop switches
@@ -1003,7 +1009,7 @@
 #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
 #define HAS_Z3_MIN (PIN_EXISTS(Z3_MIN))
 #define HAS_Z3_MAX (PIN_EXISTS(Z3_MAX))
-#define HAS_Z_MIN_PROBE_PIN (HAS_CUSTOM_PROBE_PIN && PIN_EXISTS(Z_MIN_PROBE))
+#define HAS_Z_MIN_PROBE_PIN (USES_Z_MIN_PROBE_ENDSTOP && PIN_EXISTS(Z_MIN_PROBE))
 #define HAS_CALIBRATION_PIN (PIN_EXISTS(CALIBRATION))
 
 // ADC Temp Sensors (Thermistor or Thermocouple with amplifier ADC interface)
@@ -1061,7 +1067,7 @@
 #define WATCH_CHAMBER (HAS_HEATED_CHAMBER && ENABLED(THERMAL_PROTECTION_CHAMBER) && WATCH_CHAMBER_TEMP_PERIOD > 0)
 
 // Auto fans
-#define HAS_AUTO_FAN_0 (HOTENDS > 0 && PIN_EXISTS(E0_AUTO_FAN))
+#define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
 #define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
 #define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
 #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
@@ -1070,9 +1076,14 @@
 #define HAS_AUTO_CHAMBER_FAN (HAS_TEMP_CHAMBER && PIN_EXISTS(CHAMBER_AUTO_FAN))
 
 #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3 || HAS_AUTO_FAN_4 || HAS_AUTO_FAN_5 || HAS_AUTO_CHAMBER_FAN)
-#define _FANOVERLAP(A,B) (A##_AUTO_FAN_PIN == E##B##_AUTO_FAN_PIN)
 #if HAS_AUTO_FAN
-  #define AUTO_CHAMBER_IS_E (_FANOVERLAP(CHAMBER,0) || _FANOVERLAP(CHAMBER,1) || _FANOVERLAP(CHAMBER,2) || _FANOVERLAP(CHAMBER,3) || _FANOVERLAP(CHAMBER,4) || _FANOVERLAP(CHAMBER,5))
+  #define AUTO_CHAMBER_IS_0 (CHAMBER_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_1 (CHAMBER_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_2 (CHAMBER_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_3 (CHAMBER_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_4 (CHAMBER_AUTO_FAN_PIN == E4_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_5 (CHAMBER_AUTO_FAN_PIN == E5_AUTO_FAN_PIN)
+  #define AUTO_CHAMBER_IS_E (AUTO_CHAMBER_IS_0 || AUTO_CHAMBER_IS_1 || AUTO_CHAMBER_IS_2 || AUTO_CHAMBER_IS_3 || AUTO_CHAMBER_IS_4 || AUTO_CHAMBER_IS_5)
 #endif
 
 #if !HAS_AUTO_CHAMBER_FAN || AUTO_CHAMBER_IS_E
@@ -1323,17 +1334,6 @@
   #define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default
 #endif
 
-/**
- * MIN/MAX case light PWM scaling
- */
-#if HAS_CASE_LIGHT
-  #ifndef CASE_LIGHT_MAX_PWM
-    #define CASE_LIGHT_MAX_PWM 255
-  #elif !WITHIN(CASE_LIGHT_MAX_PWM, 1, 255)
-    #error "CASE_LIGHT_MAX_PWM must be a value from 1 to 255."
-  #endif
-#endif
-
 /**
  * Bed Probe dependencies
  */
@@ -1766,25 +1766,23 @@
   #define Z_STEPPER_COUNT 1
 #endif
 
-#if HAS_SPI_LCD
-  // Get LCD character width/height, which may be overridden by pins, configs, etc.
-  #ifndef LCD_WIDTH
-    #if HAS_GRAPHICAL_LCD
-      #define LCD_WIDTH 21
-    #elif ENABLED(ULTIPANEL)
-      #define LCD_WIDTH 20
-    #else
-      #define LCD_WIDTH 16
-    #endif
+// Get LCD character width/height, which may be overridden by pins, configs, etc.
+#ifndef LCD_WIDTH
+  #if HAS_GRAPHICAL_LCD
+    #define LCD_WIDTH 21
+  #elif ENABLED(ULTIPANEL)
+    #define LCD_WIDTH 20
+  #elif HAS_SPI_LCD
+    #define LCD_WIDTH 16
   #endif
-  #ifndef LCD_HEIGHT
-    #if HAS_GRAPHICAL_LCD
-      #define LCD_HEIGHT 5
-    #elif ENABLED(ULTIPANEL)
-      #define LCD_HEIGHT 4
-    #else
-      #define LCD_HEIGHT 2
-    #endif
+#endif
+#ifndef LCD_HEIGHT
+  #if HAS_GRAPHICAL_LCD
+    #define LCD_HEIGHT 5
+  #elif ENABLED(ULTIPANEL)
+    #define LCD_HEIGHT 4
+  #elif HAS_SPI_LCD
+    #define LCD_HEIGHT 2
   #endif
 #endif
 
@@ -1806,10 +1804,3 @@
 #if !NUM_SERIAL
   #undef BAUD_RATE_GCODE
 #endif
-
-#if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-  #undef Z_STEPPER_ALIGN_AMP
-#endif
-#ifndef Z_STEPPER_ALIGN_AMP
-  #define Z_STEPPER_ALIGN_AMP 1.0
-#endif

Marlin/src/inc/MarlinConfigPre.h

@@ -34,20 +34,8 @@
 
 #include "../core/boards.h"
 #include "../core/macros.h"
-#include "../../Configuration.h"
-
-
-#ifdef CUSTOM_VERSION_FILE
-  #if defined(__has_include)
-    #if __has_include(XSTR(../../CUSTOM_VERSION_FILE))
-      #include XSTR(../../CUSTOM_VERSION_FILE)
-    #endif
-  #else
-    #include XSTR(../../CUSTOM_VERSION_FILE)
-  #endif
-#endif
-
 #include "Version.h"
+#include "../../Configuration.h"
 
 #include "Conditionals_LCD.h"
 #include HAL_PATH(../HAL, inc/Conditionals_LCD.h)

Marlin/src/inc/SanityCheck.h

@@ -74,9 +74,7 @@
 #elif defined(CUSTOM_MENDEL_NAME)
   #error "CUSTOM_MENDEL_NAME is now CUSTOM_MACHINE_NAME. Please update your configuration."
 #elif defined(HAS_AUTOMATIC_VERSIONING)
-  #error "HAS_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
-#elif defined(USE_AUTOMATIC_VERSIONING)
-  #error "USE_AUTOMATIC_VERSIONING is now CUSTOM_VERSION_FILE. Please update your configuration."
+  #error "HAS_AUTOMATIC_VERSIONING is now USE_AUTOMATIC_VERSIONING. Please update your configuration."
 #elif defined(SDSLOW)
   #error "SDSLOW deprecated. Set SPI_SPEED to SPI_HALF_SPEED instead."
 #elif defined(SDEXTRASLOW)
@@ -312,7 +310,7 @@
   #error "LEVEL_BED_CORNERS requires a LEVEL_CORNERS_INSET value. Please update your Configuration.h."
 #elif defined(BEZIER_JERK_CONTROL)
   #error "BEZIER_JERK_CONTROL is now S_CURVE_ACCELERATION. Please update your configuration."
-#elif DISABLED(CLASSIC_JERK) && defined(JUNCTION_DEVIATION_FACTOR)
+#elif defined(JUNCTION_DEVIATION_FACTOR)
   #error "JUNCTION_DEVIATION_FACTOR is now JUNCTION_DEVIATION_MM. Please update your configuration."
 #elif defined(JUNCTION_ACCELERATION_FACTOR)
   #error "JUNCTION_ACCELERATION_FACTOR is obsolete. Delete it from Configuration_adv.h."
@@ -406,8 +404,6 @@
   #error "(MIN|MAX)_PROBE_[XY] are now calculated at runtime. Please remove them from Configuration.h."
 #elif defined(Z_STEPPER_ALIGN_X) || defined(Z_STEPPER_ALIGN_X)
   #error "Z_STEPPER_ALIGN_X and Z_STEPPER_ALIGN_Y are now combined as Z_STEPPER_ALIGN_XY. Please update your Configuration_adv.h."
-#elif defined(JUNCTION_DEVIATION)
-  #error "JUNCTION_DEVIATION is no longer required. (See CLASSIC_JERK). Please remove it from Configuration.h."
 #endif
 
 #define BOARD_MKS_13        -1000
@@ -417,7 +413,6 @@
 #define BOARD_BIQU_SKR_V1_1 -1004
 #define BOARD_STM32F1R      -1005
 #define BOARD_STM32F103R    -1006
-#define BOARD_ESP32         -1007
 #if MB(MKS_13)
   #error "BOARD_MKS_13 has been renamed BOARD_MKS_GEN_13. Please update your configuration."
 #elif MB(TRIGORILLA)
@@ -432,8 +427,6 @@
   #error "BOARD_STM32F1R has been renamed BOARD_STM32F103RE. Please update your configuration."
 #elif MB(STM32F103R)
   #error "BOARD_STM32F103R has been renamed BOARD_STM32F103RE. Please update your configuration."
-#elif MOTHERBOARD == BOARD_ESP32
-  #error "BOARD_ESP32 has been renamed BOARD_ESPRESSIF_ESP32. Please update your configuration."
 #endif
 #undef BOARD_MKS_13
 #undef BOARD_TRIGORILLA
@@ -442,7 +435,6 @@
 #undef BOARD_BIQU_SKR_V1_1
 #undef BOARD_STM32F1R
 #undef BOARD_STM32F103R
-#undef BOARD_ESP32
 
 /**
  * Marlin release, version and default string
@@ -743,6 +735,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "Marlin supports a maximum of 6 EXTRUDERS."
   #endif
 
+  #if ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
+    #error "EXTRUDERS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
+  #endif
+
   #if ENABLED(HEATERS_PARALLEL)
     #error "EXTRUDERS must be 1 with HEATERS_PARALLEL."
   #endif
@@ -1044,10 +1040,10 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #endif
 
 /**
- * Junction deviation is incompatible with kinematic systems.
+ * Junction deviation is not compatible with kinematic systems.
  */
-#if DISABLED(CLASSIC_JERK) && IS_KINEMATIC
-  #error "CLASSIC_JERK is required for DELTA and SCARA."
+#if ENABLED(JUNCTION_DEVIATION) && IS_KINEMATIC
+  #error "Junction deviation is only compatible with Cartesians."
 #endif
 
 /**
@@ -1274,7 +1270,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 #endif
 
 #if HAS_MESH
-  #if HAS_CLASSIC_JERK
+  #if DISABLED(JUNCTION_DEVIATION)
     static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
   #endif
 #elif ENABLED(G26_MESH_VALIDATION)
@@ -1497,8 +1493,6 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
     #error "TEMP_SENSOR_1 is required with 2 or more HOTENDS."
   #elif !ANY_PIN(TEMP_1, MAX6675_SS2)
     #error "TEMP_1_PIN not defined for this board."
-  #elif ENABLED(TEMP_SENSOR_1_AS_REDUNDANT)
-    #error "HOTENDS must be 1 with TEMP_SENSOR_1_AS_REDUNDANT."
   #endif
   #if HOTENDS > 2
     #if TEMP_SENSOR_2 == 0
@@ -1589,7 +1583,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS
 /**
  * LED Backlight Timeout
  */
-#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && ENABLED(PSU_CONTROL))
+#if defined(LED_BACKLIGHT_TIMEOUT) && !(EITHER(FYSETC_MINI_12864_2_0, FYSETC_MINI_12864_2_1) && HAS_POWER_SWITCH)
   #error "LED_BACKLIGHT_TIMEOUT requires a FYSETC Mini Panel and a Power Switch."
 #endif
 
@@ -2333,24 +2327,11 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 #endif
 
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
-
   #if !Z_MULTI_STEPPER_DRIVERS
     #error "Z_STEPPER_AUTO_ALIGN requires Z_DUAL_STEPPER_DRIVERS or Z_TRIPLE_STEPPER_DRIVERS."
   #elif !HAS_BED_PROBE
     #error "Z_STEPPER_AUTO_ALIGN requires a Z-bed probe."
   #endif
-
-  #if ENABLED(Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS)
-    #if DISABLED(Z_TRIPLE_STEPPER_DRIVERS)
-      #error "Z_STEPPER_ALIGN_KNOWN_STEPPER_POSITIONS requires Z_TRIPLE_STEPPER_DRIVERS."
-    #endif
-    constexpr float sanity_arr_screw_xy[][2] = Z_STEPPER_ALIGN_STEPPER_XY;
-    static_assert(
-      COUNT(sanity_arr_screw_xy) == Z_STEPPER_COUNT,
-      "Z_STEPPER_ALIGN_STEPPER_XY requires three {X,Y} entries (one per Z stepper)."
-    );
-  #endif
-
 #endif
 
 #if ENABLED(PRINTCOUNTER) && DISABLED(EEPROM_SETTINGS)
@@ -2465,14 +2446,8 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
 /**
  * Ensure this option is set intentionally
  */
-#if ENABLED(PSU_CONTROL)
-  #ifndef PSU_ACTIVE_HIGH
-    #error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
-  #elif !PIN_EXISTS(PS_ON)
-    #error "PSU_CONTROL requires PS_ON_PIN."
-  #endif
-#elif ENABLED(AUTO_POWER_CONTROL)
-  #error "AUTO_POWER_CONTROL requires PSU_CONTROL."
+#if ENABLED(PSU_CONTROL) && !defined(PSU_ACTIVE_HIGH)
+  #error "PSU_CONTROL requires PSU_ACTIVE_HIGH to be defined as 'true' or 'false'."
 #endif
 
 #if HAS_CUTTER
@@ -2534,11 +2509,3 @@ static_assert(   _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2)
   #endif
   #undef _PIN_CONFLICT
 #endif
-
-#if !HAS_GRAPHICAL_LCD
-  #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
-    #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD."
-  #elif ENABLED(SHOW_REMAINING_TIME)
-    #error "SHOW_REMAINING_TIME currently requires a Graphical LCD."
-  #endif
-#endif

Marlin/src/inc/Version.h

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -21,102 +21,77 @@
  */
 #pragma once
 
-/**
- * Release version. Leave the Marlin version or apply a custom scheme.
- */
-#ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "bugfix-2.0.x"
-#endif
+#include "../core/macros.h" // for ENABLED
 
 /**
- * Verbose version identifier containing a unique identifier, such as the
- * vendor name, download location, GitHub account, etc.
- */
-#ifndef DETAILED_BUILD_VERSION
-  #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (GitHub)"
-#endif
-
-/**
- * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
- * here we define this default string as the date where the latest release
- * version was tagged.
- */
-#ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2019-10-25"
-#endif
-
-/**
- * Minimum Configuration.h and Configuration_adv.h file versions.
- * Set based on the release version number. Used to catch an attempt to use
- * older configurations. Override these if using a custom versioning scheme
- * to alert users to major changes.
+ * This file is the standard Marlin version identifier file.
+ * Use -DUSE_AUTOMATIC_VERSIONING=1 and a custom _Version.h
+ * to override these values.
  */
 
-#define MARLIN_HEX_VERSION 020000
-#ifndef REQUIRED_CONFIGURATION_H_VERSION
-  #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
-#endif
-#ifndef REQUIRED_CONFIGURATION_ADV_H_VERSION
-  #define REQUIRED_CONFIGURATION_ADV_H_VERSION MARLIN_HEX_VERSION
-#endif
+#if ENABLED(USE_AUTOMATIC_VERSIONING)
 
-/**
- * The protocol for communication to the host. Protocol indicates communication
- * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
- * (Other behaviors are given by the firmware version and capabilities report.)
- */
-#ifndef PROTOCOL_VERSION
+  #include "_Version.h"
+
+#else
+
+  /**
+   * Marlin release version identifier
+   */
+  #define SHORT_BUILD_VERSION "2.0_DW4"
+
+  /**
+   * Verbose version identifier which should contain a reference to the location
+   * from where the binary was downloaded or the source code was compiled.
+   */
+  //#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
+
+  /**
+   * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+   * here we define this default string as the date where the latest release
+   * version was tagged.
+   */
+  #define STRING_DISTRIBUTION_DATE "2019-10-05"
+
+  /**
+   * Required minimum Configuration.h and Configuration_adv.h file versions.
+   *
+   * You must increment this version number for every significant change such as,
+   * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on
+   * the configuration files.
+   */
+  #define REQUIRED_CONFIGURATION_H_VERSION 020000
+  #define REQUIRED_CONFIGURATION_ADV_H_VERSION 020000
+
+  /**
+   * The protocol for communication to the host. Protocol indicates communication
+   * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+   * (Other behaviors are given by the firmware version and capabilities report.)
+   */
   #define PROTOCOL_VERSION "1.0"
-#endif
 
-/**
- * Define a generic printer name to be output to the LCD after booting Marlin.
- */
-#ifndef MACHINE_NAME
-  #define MACHINE_NAME "3D Printer"
-#endif
+  /**
+   * Defines a generic printer name to be output to the LCD after booting Marlin.
+   */
+  #define MACHINE_NAME "TM3D Creality"
 
-/**
- * Website where users can find Marlin source code for the binary installed on the
- * device. Override this if you provide public source code download. (GPLv3 requires
- * providing the source code to your customers.)
- */
-#ifndef SOURCE_CODE_URL
-  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
-#endif
+  /**
+   * The SOURCE_CODE_URL is the location where users will find the Marlin Source
+   * Code which is installed on the device. In most cases —unless the manufacturer
+   * has a distinct Github fork— the Source Code URL should just be the main
+   * Marlin repository.
+   */
+  #define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/Creality_Marlin2.0.x"
 
-/**
- * Default generic printer UUID.
- */
-#ifndef DEFAULT_MACHINE_UUID
+  /**
+   * Default generic printer UUID.
+   */
   #define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
-#endif
 
   /**
    * The WEBSITE_URL is the location where users can get more information such as
-   * documentation about a specific Marlin release. Displayed in the Info Menu.
+   * documentation about a specific Marlin release.
    */
-#ifndef WEBSITE_URL
-  #define WEBSITE_URL "http://marlinfw.org"
-#endif
+  #define WEBSITE_URL "tinymachines3d.com"
 
-/**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
- */
-#ifndef USB_DEVICE_VENDOR_ID
-  #define  USB_DEVICE_VENDOR_ID           0x03EB /* ATMEL VID */
-#endif
-#ifndef USB_DEVICE_PRODUCT_ID
-  #define  USB_DEVICE_PRODUCT_ID          0x2424 /* MSC / CDC */
-#endif
-//! USB Device string definitions (Optional)
-#ifndef USB_DEVICE_MANUFACTURE_NAME
-  #define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
-#endif
-#ifdef CUSTOM_MACHINE_NAME
-  #define  USB_DEVICE_PRODUCT_NAME        CUSTOM_MACHINE_NAME
-#else
-  #define  USB_DEVICE_PRODUCT_NAME        MACHINE_NAME
-#endif
-#define  USB_DEVICE_SERIAL_NAME           "123985739853"
+#endif // USE_AUTOMATIC_VERSIONING

Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp

@@ -484,9 +484,9 @@ void MarlinUI::draw_kill_screen() {
   lcd_put_u8str(0, 0, status_message);
   lcd_uint_t y = 2;
   #if LCD_HEIGHT >= 4
-    lcd_put_u8str_P(0, y++, GET_TEXT(MSG_HALTED));
+    lcd_put_u8str_P(0, y++, PSTR(MSG_HALTED));
   #endif
-  lcd_put_u8str_P(0, y, GET_TEXT(MSG_PLEASE_RESET));
+  lcd_put_u8str_P(0, y, PSTR(MSG_PLEASE_RESET));
 }
 
 //
@@ -566,7 +566,7 @@ FORCE_INLINE void _draw_bed_status(const bool blink) {
 #if HAS_PRINT_PROGRESS
 
   FORCE_INLINE void _draw_print_progress() {
-    const uint8_t progress = ui.get_progress_percent();
+    const uint8_t progress = ui.get_progress();
     lcd_put_u8str_P(PSTR(
       #if ENABLED(SDSUPPORT)
         "SD"
@@ -613,7 +613,7 @@ void MarlinUI::draw_status_message(const bool blink) {
     // Draw the progress bar if the message has shown long enough
     // or if there is no message set.
     if (ELAPSED(millis(), progress_bar_ms + PROGRESS_BAR_MSG_TIME) || !has_status()) {
-      const uint8_t progress = get_progress_percent();
+      const uint8_t progress = get_progress();
       if (progress > 2) return draw_progress_bar(progress);
     }
 
@@ -861,7 +861,7 @@ void MarlinUI::draw_status_screen() {
           uint16_t per;
           #if HAS_FAN0
             if (true
-              #if EXTRUDERS && ENABLED(ADAPTIVE_FAN_SLOWING)
+              #if EXTRUDERS
                 && (blink || thermalManager.fan_speed_scaler[0] < 128)
               #endif
             ) {
@@ -977,7 +977,7 @@ void MarlinUI::draw_status_screen() {
 
   #endif // ADVANCED_PAUSE_FEATURE
 
-  void draw_menu_item_static(const uint8_t row, PGM_P const pstr, const uint8_t style/*=SS_DEFAULT*/, const char * const valstr/*=nullptr*/) {
+  void draw_menu_item_static(const uint8_t row, PGM_P const pstr, const uint8_t style/*=SS_CENTER*/, const char * const valstr/*=nullptr*/) {
     int8_t n = LCD_WIDTH;
     lcd_moveto(0, row);
     if ((style & SS_CENTER) && !valstr) {

Marlin/src/lcd/dogm/fontdata/langdata_jp-kana.h

@@ -0,0 +1,116 @@
+/**
+ * Generated automatically by buildroot/share/fonts/uxggenpages.sh
+ * Contents will be REPLACED by future processing!
+ * Use genallfont.sh to generate font data for updated languages.
+ */
+#include <U8glib.h>
+
+const u8g_fntpgm_uint8_t fontpage_97_161_164[61] U8G_FONT_SECTION("fontpage_97_161_164") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa1,0xa4,0x00,0x06,0x00,0x00,
+  0x00,0x04,0x04,0x04,0x06,0x00,0x00,0xf0,0x10,0x60,0x40,0x05,0x06,0x06,0x06,0x00,
+  0x00,0xf8,0x08,0x28,0x30,0x20,0x40,0x03,0x04,0x04,0x06,0x01,0x00,0x20,0x40,0xc0,
+  0x40,0x04,0x06,0x06,0x06,0x00,0x00,0x10,0x20,0x60,0xa0,0x20,0x20};
+const u8g_fntpgm_uint8_t fontpage_97_166_166[29] U8G_FONT_SECTION("fontpage_97_166_166") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa6,0xa6,0x00,0x06,0x00,0x00,
+  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x20,0xf8,0x88,0x08,0x10,0x20};
+const u8g_fntpgm_uint8_t fontpage_97_168_168[28] U8G_FONT_SECTION("fontpage_97_168_168") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa8,0xa8,0x00,0x05,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0xf8};
+const u8g_fntpgm_uint8_t fontpage_97_170_181[167] U8G_FONT_SECTION("fontpage_97_170_181") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaa,0xb5,0x00,0x08,0x00,0x00,
+  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x10,0xf8,0x30,0x50,0x90,0x10,0x05,0x06,0x06,
+  0x06,0x00,0x00,0x40,0xf8,0x48,0x48,0x48,0x90,0x05,0x08,0x08,0x06,0x00,0x00,0x28,
+  0x00,0x40,0xf8,0x48,0x48,0x48,0x90,0x05,0x06,0x06,0x06,0x00,0x00,0x20,0xf8,0x20,
+  0xf8,0x20,0x20,0x05,0x08,0x08,0x06,0x00,0x00,0x28,0x00,0x20,0xf8,0x20,0xf8,0x20,
+  0x20,0x04,0x05,0x05,0x06,0x00,0x00,0x70,0x90,0x10,0x20,0xc0,0x05,0x07,0x07,0x06,
+  0x00,0x00,0x28,0x00,0x70,0x90,0x10,0x20,0xc0,0x05,0x06,0x06,0x06,0x00,0x00,0x40,
+  0x78,0x90,0x10,0x10,0x20,0x05,0x08,0x08,0x06,0x00,0x00,0x28,0x00,0x40,0x78,0x90,
+  0x10,0x10,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x08,0x08,0x08,0xf8,0x05,0x07,
+  0x07,0x06,0x00,0x00,0x28,0x00,0xf8,0x08,0x08,0x08,0xf8,0x05,0x06,0x06,0x06,0x00,
+  0x00,0x50,0xf8,0x50,0x10,0x20,0x40};
+const u8g_fntpgm_uint8_t fontpage_97_183_187[77] U8G_FONT_SECTION("fontpage_97_183_187") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb7,0xbb,0x00,0x07,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0xc0,0x08,0xc8,0x10,0xe0,0x05,0x07,0x07,0x06,
+  0x00,0x00,0x28,0x00,0xc0,0x08,0xc8,0x10,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,
+  0x10,0x20,0x50,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x28,0x00,0xf8,0x10,0x20,0x50,
+  0x88,0x05,0x06,0x06,0x06,0x00,0x00,0x40,0xf8,0x48,0x50,0x40,0x38};
+const u8g_fntpgm_uint8_t fontpage_97_189_193[77] U8G_FONT_SECTION("fontpage_97_189_193") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xbd,0xc1,0x00,0x07,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0x48,0x10,0x60,0x05,0x07,0x07,0x06,
+  0x00,0x00,0x28,0x00,0x88,0x88,0x48,0x10,0x60,0x05,0x05,0x05,0x06,0x00,0x00,0x78,
+  0x48,0xa8,0x10,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x28,0x00,0x78,0x48,0xa8,0x10,
+  0x60,0x05,0x06,0x06,0x06,0x00,0x00,0x10,0xe0,0x20,0xf8,0x20,0x40};
+const u8g_fntpgm_uint8_t fontpage_97_195_196[38] U8G_FONT_SECTION("fontpage_97_195_196") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc3,0xc4,0x00,0x05,0x00,0x00,
+  0x00,0x05,0x04,0x04,0x06,0x00,0x00,0xa8,0xa8,0x08,0x30,0x05,0x05,0x05,0x06,0x00,
+  0x00,0xa8,0xa8,0x08,0x10,0x20};
+const u8g_fntpgm_uint8_t fontpage_97_198_211[190] U8G_FONT_SECTION("fontpage_97_198_211") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc6,0xd3,0x00,0x08,0x00,0x00,
+  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x70,0x00,0xf8,0x20,0x20,0x40,0x05,0x08,0x08,
+  0x06,0x00,0x00,0x28,0x00,0x70,0x00,0xf8,0x20,0x20,0x40,0x03,0x06,0x06,0x06,0x01,
+  0x00,0x80,0x80,0xc0,0xa0,0x80,0x80,0x04,0x08,0x08,0x06,0x01,0x00,0x50,0x00,0x80,
+  0x80,0xc0,0xa0,0x80,0x80,0x05,0x06,0x06,0x06,0x00,0x00,0x20,0xf8,0x20,0x20,0x40,
+  0x80,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x00,0x00,0x00,0xf8,0x05,0x05,0x05,0x06,
+  0x00,0x00,0xf8,0x08,0x50,0x20,0xd0,0x05,0x06,0x06,0x06,0x00,0x00,0x20,0xf8,0x10,
+  0x20,0x70,0xa8,0x03,0x06,0x06,0x06,0x01,0x00,0x20,0x20,0x20,0x20,0x40,0x80,0x05,
+  0x05,0x05,0x06,0x00,0x00,0x10,0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,
+  0x28,0x00,0x10,0x88,0x88,0x88,0x88,0x05,0x08,0x08,0x06,0x00,0x00,0x18,0x18,0x00,
+  0x10,0x88,0x88,0x88,0x88,0x05,0x06,0x06,0x06,0x00,0x00,0x80,0x80,0xf8,0x80,0x80,
+  0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x28,0x80,0x80,0xf8,0x80,0x80,0x78};
+const u8g_fntpgm_uint8_t fontpage_97_213_217[77] U8G_FONT_SECTION("fontpage_97_213_217") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd5,0xd9,0x00,0x08,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x08,0x08,0x10,0x60,0x05,0x07,0x07,0x06,
+  0x00,0x00,0x28,0x00,0xf8,0x08,0x08,0x10,0x60,0x05,0x08,0x08,0x06,0x00,0x00,0x18,
+  0x18,0x00,0xf8,0x08,0x08,0x10,0x60,0x05,0x04,0x04,0x06,0x00,0x01,0x40,0xa0,0x10,
+  0x08,0x05,0x06,0x06,0x06,0x00,0x01,0x28,0x00,0x40,0xa0,0x10,0x08};
+const u8g_fntpgm_uint8_t fontpage_97_219_220[43] U8G_FONT_SECTION("fontpage_97_219_220") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdb,0xdc,0x00,0x08,0x00,0x00,
+  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x20,0xf8,0x20,0xa8,0xa8,0x20,0x05,0x08,0x08,
+  0x06,0x00,0x00,0x28,0x00,0x20,0xf8,0x20,0xa8,0xa8,0x20};
+const u8g_fntpgm_uint8_t fontpage_97_222_223[39] U8G_FONT_SECTION("fontpage_97_222_223") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xde,0xdf,0x00,0x05,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x08,0x50,0x20,0x10,0x04,0x05,0x05,0x06,
+  0x01,0x00,0xe0,0x00,0xe0,0x00,0xf0};
+const u8g_fntpgm_uint8_t fontpage_97_225_226[39] U8G_FONT_SECTION("fontpage_97_225_226") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe1,0xe2,0x00,0x05,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x08,0x28,0x10,0x28,0xc0,0x05,0x05,0x05,0x06,
+  0x00,0x00,0xf8,0x40,0xf8,0x40,0x38};
+const u8g_fntpgm_uint8_t fontpage_97_228_229[39] U8G_FONT_SECTION("fontpage_97_228_229") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe4,0xe5,0x00,0x06,0x00,0x00,
+  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x40,0xf8,0x48,0x50,0x40,0x40,0x04,0x04,0x04,
+  0x06,0x00,0x00,0x60,0x20,0x20,0xf0};
+const u8g_fntpgm_uint8_t fontpage_97_231_237[96] U8G_FONT_SECTION("fontpage_97_231_237") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe7,0xed,0x00,0x06,0x00,0x00,
+  0x00,0x04,0x05,0x05,0x06,0x00,0x00,0xf0,0x10,0xf0,0x10,0xf0,0x05,0x05,0x05,0x06,
+  0x00,0x00,0xf8,0x08,0xf8,0x08,0xf8,0x05,0x06,0x06,0x06,0x00,0x00,0x70,0x00,0xf8,
+  0x08,0x10,0x20,0x04,0x06,0x06,0x06,0x00,0x00,0x90,0x90,0x90,0x90,0x10,0x20,0x05,
+  0x05,0x05,0x06,0x00,0x00,0x20,0xa0,0xa8,0xa8,0xb0,0x04,0x05,0x05,0x06,0x00,0x00,
+  0x80,0x80,0x90,0xa0,0xc0,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x88,0x88,0x88,0xf8
+  };
+const u8g_fntpgm_uint8_t fontpage_97_242_243[39] U8G_FONT_SECTION("fontpage_97_242_243") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xf2,0xf3,0x00,0x05,0x00,0x00,
+  0x00,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x08,0xf8,0x08,0x30,0x05,0x05,0x05,0x06,
+  0x00,0x00,0xc0,0x08,0x08,0x10,0xe0};
+const u8g_fntpgm_uint8_t fontpage_97_252_252[24] U8G_FONT_SECTION("fontpage_97_252_252") = {
+  0x00,0x06,0x0c,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xfc,0xfc,0x00,0x03,0x00,0x00,
+  0x00,0x05,0x01,0x01,0x06,0x00,0x02,0xf8};
+
+#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data }
+static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {
+    FONTDATA_ITEM(97, 161, 164, fontpage_97_161_164), // 'ァ' -- 'イ'
+    FONTDATA_ITEM(97, 166, 166, fontpage_97_166_166), // 'ウ' -- 'ウ'
+    FONTDATA_ITEM(97, 168, 168, fontpage_97_168_168), // 'エ' -- 'エ'
+    FONTDATA_ITEM(97, 170, 181, fontpage_97_170_181), // 'オ' -- 'サ'
+    FONTDATA_ITEM(97, 183, 187, fontpage_97_183_187), // 'シ' -- 'セ'
+    FONTDATA_ITEM(97, 189, 193, fontpage_97_189_193), // 'ソ' -- 'チ'
+    FONTDATA_ITEM(97, 195, 196, fontpage_97_195_196), // 'ッ' -- 'ツ'
+    FONTDATA_ITEM(97, 198, 211, fontpage_97_198_211), // 'テ' -- 'ビ'
+    FONTDATA_ITEM(97, 213, 217, fontpage_97_213_217), // 'フ' -- 'ベ'
+    FONTDATA_ITEM(97, 219, 220, fontpage_97_219_220), // 'ホ' -- 'ボ'
+    FONTDATA_ITEM(97, 222, 223, fontpage_97_222_223), // 'マ' -- 'ミ'
+    FONTDATA_ITEM(97, 225, 226, fontpage_97_225_226), // 'メ' -- 'モ'
+    FONTDATA_ITEM(97, 228, 229, fontpage_97_228_229), // 'ヤ' -- 'ュ'
+    FONTDATA_ITEM(97, 231, 237, fontpage_97_231_237), // 'ョ' -- 'ロ'
+    FONTDATA_ITEM(97, 242, 243, fontpage_97_242_243), // 'ヲ' -- 'ン'
+    FONTDATA_ITEM(97, 252, 252, fontpage_97_252_252), // 'ー' -- 'ー'
+};

Marlin/src/lcd/dogm/fontdata/langdata_jp_kana.h

@@ -1,111 +0,0 @@
-/**
- * Generated automatically by buildroot/share/fonts/uxggenpages.sh
- * Contents will be REPLACED by future processing!
- * Use genallfont.sh to generate font data for updated languages.
- */
-#include <U8glib.h>
-
-const u8g_fntpgm_uint8_t fontpage_97_161_164[65] U8G_FONT_SECTION("fontpage_97_161_164") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa1,0xa4,0x00,0x07,0x00,0x00,
-  0x00,0x04,0x05,0x05,0x06,0x00,0x00,0xf0,0x10,0x60,0x40,0x80,0x05,0x07,0x07,0x06,
-  0x00,0x00,0xf8,0x08,0x28,0x30,0x20,0x20,0x40,0x04,0x05,0x05,0x06,0x00,0x00,0x10,
-  0x20,0x60,0xa0,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x10,0x20,0x60,0xa0,0x20,
-  0x20};
-const u8g_fntpgm_uint8_t fontpage_97_166_166[30] U8G_FONT_SECTION("fontpage_97_166_166") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa6,0xa6,0x00,0x07,0x00,0x00,
-  0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xf8,0x88,0x88,0x08,0x10,0x60};
-const u8g_fntpgm_uint8_t fontpage_97_168_168[29] U8G_FONT_SECTION("fontpage_97_168_168") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa8,0xa8,0x00,0x06,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0xf8};
-const u8g_fntpgm_uint8_t fontpage_97_170_187[268] U8G_FONT_SECTION("fontpage_97_170_187") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaa,0xbb,0x00,0x0d,0x00,0x00,
-  0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0xf8,0x10,0x30,0x50,0x90,0x10,0x05,0x07,
-  0x07,0x06,0x00,0x00,0x40,0xf8,0x48,0x48,0x48,0x48,0x98,0x05,0x09,0x09,0x06,0x00,
-  0x00,0x28,0x08,0x40,0xf8,0x48,0x48,0x48,0x48,0x98,0x05,0x07,0x07,0x06,0x00,0x00,
-  0x20,0xf8,0x20,0x20,0xf8,0x10,0x10,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x08,0x20,
-  0xf8,0x20,0x20,0xf8,0x10,0x10,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0x78,0x48,0x88,
-  0x08,0x10,0x60,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x08,0x40,0x78,0x48,0x88,0x08,
-  0x10,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0xf8,0x90,0x90,0x10,0x10,0x20,0x05,
-  0x09,0x09,0x06,0x00,0x00,0x28,0x28,0x80,0xf8,0x90,0x90,0x10,0x10,0x20,0x05,0x06,
-  0x06,0x06,0x00,0x00,0xf8,0x08,0x08,0x08,0x08,0xf8,0x05,0x09,0x09,0x06,0x00,0x00,
-  0x28,0x28,0x00,0xf8,0x08,0x08,0x08,0x08,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0x50,
-  0xf8,0x50,0x50,0x50,0x10,0x20,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x08,0x50,0xf8,
-  0x50,0x50,0x50,0x10,0x20,0x05,0x06,0x06,0x06,0x00,0x00,0xc0,0x08,0xc8,0x08,0x10,
-  0xe0,0x07,0x0d,0x0d,0x06,0x00,0x00,0x02,0x00,0x00,0x00,0x28,0x28,0x00,0xc0,0x08,
-  0xc8,0x08,0x10,0xe0,0x05,0x06,0x06,0x06,0x00,0x00,0x70,0x10,0x10,0x20,0x50,0x88,
-  0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x28,0x00,0x70,0x10,0x10,0x20,0x50,0x88,0x05,
-  0x07,0x07,0x06,0x00,0x00,0x40,0x40,0xf8,0x48,0x50,0x40,0x38};
-const u8g_fntpgm_uint8_t fontpage_97_189_193[85] U8G_FONT_SECTION("fontpage_97_189_193") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xbd,0xc1,0x00,0x09,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x88,0x48,0x48,0x10,0x10,0x20,0x05,0x09,0x09,
-  0x06,0x00,0x00,0x28,0x28,0x00,0x88,0x48,0x48,0x10,0x10,0x20,0x05,0x07,0x07,0x06,
-  0x00,0x00,0x40,0x78,0x48,0xa8,0x18,0x10,0x60,0x05,0x09,0x09,0x06,0x00,0x00,0x28,
-  0x08,0x40,0x78,0x48,0xa8,0x18,0x10,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0x60,
-  0x20,0xf8,0x20,0x20,0x40};
-const u8g_fntpgm_uint8_t fontpage_97_195_211[241] U8G_FONT_SECTION("fontpage_97_195_211") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc3,0xd3,0x00,0x09,0x00,0x00,
-  0x00,0x05,0x04,0x04,0x06,0x00,0x00,0xa8,0xa8,0x08,0x30,0x05,0x06,0x06,0x06,0x00,
-  0x00,0xa8,0xa8,0xa8,0x08,0x10,0x60,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x28,0x00,
-  0xa8,0xa8,0xa8,0x08,0x10,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x00,0xf8,0x20,
-  0x20,0x20,0x40,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x08,0x70,0x00,0xf8,0x20,0x20,
-  0x20,0x40,0x04,0x07,0x07,0x06,0x01,0x00,0x80,0x80,0xc0,0xa0,0x90,0x80,0x80,0x04,
-  0x09,0x09,0x06,0x01,0x00,0x50,0x10,0x80,0x80,0xc0,0xa0,0x90,0x80,0x80,0x05,0x07,
-  0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20,0x40,0x80,0x05,0x06,0x06,0x06,0x00,
-  0x00,0x70,0x00,0x00,0x00,0x00,0xf8,0x05,0x06,0x06,0x06,0x00,0x00,0x78,0x08,0x28,
-  0x10,0x28,0xc0,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x70,0x10,0x20,0x70,0xa8,0x20,
-  0x03,0x06,0x06,0x06,0x01,0x00,0x20,0x20,0x20,0x40,0x40,0x80,0x05,0x06,0x06,0x06,
-  0x00,0x00,0x10,0x50,0x50,0x48,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x28,
-  0x00,0x10,0x50,0x50,0x48,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0x00,0x18,0x18,0x00,
-  0x10,0x50,0x50,0x48,0x88,0x88,0x04,0x06,0x06,0x06,0x00,0x00,0x80,0x90,0xe0,0x80,
-  0x80,0x70,0x05,0x09,0x09,0x06,0x00,0x00,0x28,0x28,0x00,0x80,0x90,0xe0,0x80,0x80,
-  0x70};
-const u8g_fntpgm_uint8_t fontpage_97_213_217[84] U8G_FONT_SECTION("fontpage_97_213_217") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd5,0xd9,0x00,0x09,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x08,0x08,0x08,0x10,0x60,0x05,0x09,0x09,
-  0x06,0x00,0x00,0x28,0x28,0x00,0xf8,0x08,0x08,0x08,0x10,0x60,0x05,0x09,0x09,0x06,
-  0x00,0x00,0x18,0x18,0x00,0xf8,0x08,0x08,0x08,0x10,0x60,0x05,0x05,0x05,0x06,0x00,
-  0x01,0x60,0xa0,0x10,0x10,0x08,0x05,0x08,0x08,0x06,0x00,0x01,0x28,0x28,0x00,0x60,
-  0xa0,0x10,0x10,0x08};
-const u8g_fntpgm_uint8_t fontpage_97_219_220[45] U8G_FONT_SECTION("fontpage_97_219_220") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdb,0xdc,0x00,0x09,0x00,0x00,
-  0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xf8,0x20,0xa8,0xa8,0xa8,0x20,0x05,0x09,
-  0x09,0x06,0x00,0x00,0x28,0x08,0x20,0xf8,0x20,0xa8,0xa8,0xa8,0x20};
-const u8g_fntpgm_uint8_t fontpage_97_222_223[41] U8G_FONT_SECTION("fontpage_97_222_223") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xde,0xdf,0x00,0x06,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x08,0x08,0x50,0x20,0x10,0x04,0x06,0x06,
-  0x06,0x01,0x00,0xe0,0x00,0xe0,0x00,0xc0,0x30};
-const u8g_fntpgm_uint8_t fontpage_97_225_237[174] U8G_FONT_SECTION("fontpage_97_225_237") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe1,0xed,0x00,0x07,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0x08,0x48,0x30,0x10,0x28,0xc0,0x05,0x06,0x06,
-  0x06,0x00,0x00,0xf0,0x40,0xf8,0x40,0x40,0x38,0x05,0x05,0x05,0x06,0x00,0x00,0x40,
-  0xf8,0x48,0x50,0x40,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0x40,0xf8,0x48,0x50,0x40,
-  0x40,0x04,0x05,0x05,0x06,0x00,0x00,0x60,0x20,0x20,0x20,0xf0,0x05,0x06,0x06,0x06,
-  0x00,0x00,0x70,0x10,0x10,0x10,0x10,0xf8,0x04,0x05,0x05,0x06,0x00,0x00,0xf0,0x10,
-  0xf0,0x10,0xf0,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x08,0xf8,0x08,0x08,0xf8,0x05,
-  0x07,0x07,0x06,0x00,0x00,0x70,0x00,0xf8,0x08,0x08,0x10,0x60,0x04,0x07,0x07,0x06,
-  0x00,0x00,0x10,0x90,0x90,0x90,0x90,0x10,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x20,
-  0x20,0xa0,0xa0,0xa8,0xa8,0xb0,0x05,0x06,0x06,0x06,0x00,0x00,0x80,0x80,0x80,0x88,
-  0xb0,0xc0,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x88,0x88,0x88,0x88,0xf8};
-const u8g_fntpgm_uint8_t fontpage_97_242_243[41] U8G_FONT_SECTION("fontpage_97_242_243") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xf2,0xf3,0x00,0x06,0x00,0x00,
-  0x00,0x05,0x06,0x06,0x06,0x00,0x00,0xf8,0x08,0xf8,0x08,0x10,0x60,0x05,0x06,0x06,
-  0x06,0x00,0x00,0xc0,0x08,0x08,0x08,0x10,0xe0};
-const u8g_fntpgm_uint8_t fontpage_97_252_252[25] U8G_FONT_SECTION("fontpage_97_252_252") = {
-  0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xfc,0xfc,0x00,0x05,0x00,0x00,
-  0x00,0x05,0x02,0x02,0x06,0x00,0x03,0x80,0x78};
-
-#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data }
-static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {
-    FONTDATA_ITEM(97, 161, 164, fontpage_97_161_164), // 'ァ' -- 'イ'
-    FONTDATA_ITEM(97, 166, 166, fontpage_97_166_166), // 'ウ' -- 'ウ'
-    FONTDATA_ITEM(97, 168, 168, fontpage_97_168_168), // 'エ' -- 'エ'
-    FONTDATA_ITEM(97, 170, 187, fontpage_97_170_187), // 'オ' -- 'セ'
-    FONTDATA_ITEM(97, 189, 193, fontpage_97_189_193), // 'ソ' -- 'チ'
-    FONTDATA_ITEM(97, 195, 211, fontpage_97_195_211), // 'ッ' -- 'ビ'
-    FONTDATA_ITEM(97, 213, 217, fontpage_97_213_217), // 'フ' -- 'ベ'
-    FONTDATA_ITEM(97, 219, 220, fontpage_97_219_220), // 'ホ' -- 'ボ'
-    FONTDATA_ITEM(97, 222, 223, fontpage_97_222_223), // 'マ' -- 'ミ'
-    FONTDATA_ITEM(97, 225, 237, fontpage_97_225_237), // 'メ' -- 'ロ'
-    FONTDATA_ITEM(97, 242, 243, fontpage_97_242_243), // 'ヲ' -- 'ン'
-    FONTDATA_ITEM(97, 252, 252, fontpage_97_252_252), // 'ー' -- 'ー'
-};

Marlin/src/lcd/dogm/status_screen_DOGM.cpp

@@ -99,9 +99,6 @@
 
 #define STATUS_HEATERS_BOT (STATUS_HEATERS_Y + STATUS_HEATERS_HEIGHT - 1)
 
-#define PROGRESS_BAR_X 54
-#define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
-
 #if ENABLED(MARLIN_DEV_MODE)
   #define SHOW_ON_STATE READ(X_MIN_PIN)
 #else
@@ -260,7 +257,7 @@ FORCE_INLINE void _draw_heater_status(const heater_ind_t heater, const bool blin
 
   FORCE_INLINE void _draw_chamber_status(const bool blink) {
     #if ENABLED(MARLIN_DEV_MODE)
-      const float temp = 10 + (millis() >> 8) % CHAMBER_MAXTEMP,
+	    const float temp = 10 + (millis() >> 8) % CHAMBER_MAXTEMP,
                 target = CHAMBER_MAXTEMP;
     #else
       const float temp = thermalManager.degChamber();
@@ -333,30 +330,6 @@ void MarlinUI::draw_status_screen() {
     static char wstring[5], mstring[4];
   #endif
 
-  #if HAS_PRINT_PROGRESS
-    #if DISABLED(DOGM_SD_PERCENT)
-      #define _SD_INFO_X(len) (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH) / 2 - (len) * (MENU_FONT_WIDTH) / 2)
-    #else
-      #define _SD_INFO_X(len) (LCD_PIXEL_WIDTH - (len) * (MENU_FONT_WIDTH))
-    #endif
-
-    #if ENABLED(DOGM_SD_PERCENT)
-      static char progress_string[5];
-    #endif
-    static uint8_t lastElapsed = 0, lastProgress = 0;
-    static u8g_uint_t elapsed_x_pos = 0, progress_bar_solid_width = 0;
-    static char elapsed_string[16];
-    #if ENABLED(SHOW_REMAINING_TIME)
-      static u8g_uint_t estimation_x_pos = 0;
-      static char estimation_string[10];
-      #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
-        static u8g_uint_t progress_x_pos = 0;
-        static uint8_t progress_state = 0;
-        static bool prev_blink = 0;
-      #endif
-    #endif
-  #endif
-
   // At the first page, generate new display values
   if (first_page) {
     #if ANIM_HBC
@@ -380,72 +353,6 @@ void MarlinUI::draw_status_screen() {
       strcpy(wstring, ftostr12ns(filwidth.measured_mm));
       strcpy(mstring, i16tostr3(planner.volumetric_percent(parser.volumetric_enabled)));
     #endif
-
-    // Progress / elapsed / estimation updates and string formatting to avoid float math on each LCD draw
-    #if HAS_PRINT_PROGRESS
-      const progress_t progress =
-        #if HAS_PRINT_PROGRESS_PERMYRIAD
-          get_progress_permyriad()
-        #else
-          get_progress_percent()
-        #endif
-      ;
-      duration_t elapsed = print_job_timer.duration();
-      const uint8_t p = progress & 0xFF, ev = elapsed.value & 0xFF;
-      if (p != lastProgress) {
-        lastProgress = p;
-
-        progress_bar_solid_width = u8g_uint_t((PROGRESS_BAR_WIDTH - 2) * progress / (PROGRESS_SCALE) * 0.01f);
-
-        #if ENABLED(DOGM_SD_PERCENT)
-          if (progress == 0) {
-            progress_string[0] = '\0';
-            #if ENABLED(SHOW_REMAINING_TIME)
-              estimation_string[0] = '\0';
-              estimation_x_pos = _SD_INFO_X(0);
-            #endif
-          }
-          else {
-            strcpy(progress_string, (
-              #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS)
-                permyriadtostr4(progress)
-              #else
-                ui8tostr3(progress / (PROGRESS_SCALE))
-              #endif
-            ));
-          }
-          #if BOTH(SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY) // Tri-state progress display mode
-            progress_x_pos = _SD_INFO_X(strlen(progress_string));
-          #endif
-        #endif
-      }
-
-      if (ev != lastElapsed) {
-        lastElapsed = ev;
-        const bool has_days = (elapsed.value >= 60*60*24L);
-        const uint8_t len = elapsed.toDigital(elapsed_string, has_days);
-        elapsed_x_pos = _SD_INFO_X(len);
-
-        #if ENABLED(SHOW_REMAINING_TIME)
-          if (!(ev & 0x3)) {
-            duration_t estimation = elapsed.value * (100 * (PROGRESS_SCALE) - progress) / progress;
-            if (estimation.value == 0) {
-              estimation_string[0] = '\0';
-              estimation_x_pos = _SD_INFO_X(0);
-            }
-            else {
-              const bool has_days = (estimation.value >= 60*60*24L);
-              const uint8_t len = estimation.toDigital(estimation_string, has_days);
-              #if BOTH(DOGM_SD_PERCENT, ROTATE_PROGRESS_DISPLAY)
-                estimation_x_pos = _SD_INFO_X(len);
-              #else
-                estimation_x_pos = _SD_INFO_X(len + 1);
-              #endif
-            }
-          }
-        #endif
-      }
-    #endif
   }
 
   const bool blink = get_blink();
@@ -578,68 +485,55 @@ void MarlinUI::draw_status_screen() {
     //
     // Progress bar frame
     //
+    #define PROGRESS_BAR_X 54
+    #define PROGRESS_BAR_WIDTH (LCD_PIXEL_WIDTH - PROGRESS_BAR_X)
 
     if (PAGE_CONTAINS(49, 52))
       u8g.drawFrame(PROGRESS_BAR_X, 49, PROGRESS_BAR_WIDTH, 4);
 
+    const uint8_t progress = get_progress();
+
+    if (progress > 1) {
+
+      //
+      // Progress bar solid part
+      //
+
+      if (PAGE_CONTAINS(50, 51))     // 50-51 (or just 50)
+        u8g.drawBox(
+          PROGRESS_BAR_X + 1, 50,
+          (uint16_t)((PROGRESS_BAR_WIDTH - 2) * progress * 0.01), 2
+        );
+
+      //
+      // SD Percent Complete
+      //
+
+      #if ENABLED(DOGM_SD_PERCENT)
+        if (PAGE_CONTAINS(41, 48)) {
+          // Percent complete
+          lcd_put_u8str(55, 48, ui8tostr3(progress));
+          lcd_put_wchar('%');
+        }
+      #endif
+    }
+
     //
-    // Progress bar solid part
+    // Elapsed Time
     //
 
-    if (PAGE_CONTAINS(50, 51))     // 50-51 (or just 50)
-      u8g.drawBox(PROGRESS_BAR_X + 1, 50, progress_bar_solid_width, 2);
+    #if DISABLED(DOGM_SD_PERCENT)
+      #define SD_DURATION_X (PROGRESS_BAR_X + (PROGRESS_BAR_WIDTH / 2) - len * (MENU_FONT_WIDTH / 2))
+    #else
+      #define SD_DURATION_X (LCD_PIXEL_WIDTH - len * MENU_FONT_WIDTH)
+    #endif
 
     if (PAGE_CONTAINS(EXTRAS_BASELINE - INFO_FONT_ASCENT, EXTRAS_BASELINE - 1)) {
-
-      #if ALL(DOGM_SD_PERCENT, SHOW_REMAINING_TIME, ROTATE_PROGRESS_DISPLAY)
-
-        if (prev_blink != blink) {
-          prev_blink = blink;
-          if (++progress_state >= 3) progress_state = 0;
-        }
-
-        if (progress_state == 0) {
-          if (progress_string[0]) {
-            lcd_put_u8str(progress_x_pos, EXTRAS_BASELINE, progress_string);
-            lcd_put_wchar('%');
-          }
-        }
-        else if (progress_state == 2 && estimation_string[0]) {
-          lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, "R:");
-          lcd_put_u8str(estimation_x_pos, EXTRAS_BASELINE, estimation_string);
-        }
-        else if (elapsed_string[0]) {
-          lcd_put_u8str(PROGRESS_BAR_X, EXTRAS_BASELINE, "E:");
-          lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
-        }
-
-      #else // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
-
-        //
-        // SD Percent Complete
-        //
-
-        #if ENABLED(DOGM_SD_PERCENT)
-          if (progress_string[0]) {
-            lcd_put_u8str(55, 48, progress_string); // Percent complete
-            lcd_put_wchar('%');
-          }
-        #endif
-
-        //
-        // Elapsed Time
-        //
-
-        #if ENABLED(SHOW_REMAINING_TIME)
-          if (blink && estimation_string[0]) {
-            lcd_put_wchar(estimation_x_pos, EXTRAS_BASELINE, 'R');
-            lcd_put_u8str(estimation_string);
-          }
-          else
-        #endif
-            lcd_put_u8str(elapsed_x_pos, EXTRAS_BASELINE, elapsed_string);
-
-      #endif // !DOGM_SD_PERCENT || !SHOW_REMAINING_TIME || !ROTATE_PROGRESS_DISPLAY
+      char buffer[13];
+      duration_t elapsed = print_job_timer.duration();
+      bool has_days = (elapsed.value >= 60*60*24L);
+      uint8_t len = elapsed.toDigital(buffer, has_days);
+      lcd_put_u8str(SD_DURATION_X, EXTRAS_BASELINE, buffer);
     }
 
   #endif // HAS_PRINT_PROGRESS

Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp

@@ -850,7 +850,7 @@ void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) {
     // when an update is actually necessary.
 
     static uint8_t last_progress = 0;
-    const uint8_t progress = ui.get_progress_percent();
+    const uint8_t progress = ui.get_progress();
     if (forceUpdate || last_progress != progress) {
       last_progress = progress;
       draw_progress_bar(progress);