Update Configuration.h

Turn on multiple probing, off power save recovery, bump version

.circleci/config.yml

@@ -0,0 +1,274 @@
+# Python CircleCI 2.0 configuration file
+#
+# Check https://circleci.com/docs/2.0/language-python/ for more details
+#
+version: 2
+jobs:
+  build:
+    docker:
+      # specify the version you desire here
+      # use `-browsers` prefix for selenium tests, e.g. `3.6.1-browsers`
+      - image: circleci/python:2.7.13
+
+      # Specify service dependencies here if necessary
+      # CircleCI maintains a library of pre-built images
+      # documented at https://circleci.com/docs/2.0/circleci-images/
+      # - image: circleci/postgres:9.4
+    environment:
+      TEST_PLATFORM: "-e megaatmega2560"
+
+    working_directory: ~/Marlin
+
+    steps:
+      - checkout
+
+      - restore_cache:
+          paths:
+          - ~/.platformio
+          - ~/Marlin/.piolibdeps
+          keys:
+          - v1-dependencies-{{ checksum "~/Marlin/platformio.ini" }}
+          # fallback to using the latest cache if no exact match is found
+          - v1-dependencies-
+
+      - run:
+          name: install dependencies
+          command: |
+            sudo pip install -U platformio
+
+      # run tests!
+      - run:
+          name: run tests
+          command: |
+            #
+            #
+            # Fetch the tag information for the current branch
+            ls -la
+            git fetch origin --tags
+            #
+            # Publish the buildroot script folder
+            chmod +x buildroot/bin/*
+            export PATH=`pwd`/buildroot/bin/:${PATH}
+
+            # Generate custom version include
+            generate_version ./Marlin/src/inc
+            cat ./Marlin/src/inc/_Version.h
+            #
+            # Back up pins_RAMPS.h
+            #
+            backup_ramps
+
+            env_backup
+
+            #################################
+            # Build all sample configurations
+            #################################
+
+            echo testing megaatmega2560 targets...
+            export TEST_PLATFORM="-e megaatmega2560"
+            echo use_example_configs adafruit/ST7565
+            use_example_configs adafruit/ST7565
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs BQ/Hephestos
+            use_example_configs BQ/Hephestos
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs BQ/Hephestos_2
+            use_example_configs BQ/Hephestos_2
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs BQ/WITBOX
+            use_example_configs BQ/WITBOX
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs AliExpress/CL-260
+            use_example_configs AliExpress/CL-260
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            #echo use_example_configs Cartesio
+            #use_example_configs Cartesio
+            #build_marlin_pio ./ ${TEST_PLATFORM}
+            #restore_configs
+            echo use_example_configs delta/FLSUN/auto_calibrate
+            use_example_configs delta/FLSUN/auto_calibrate
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs delta/FLSUN/kossel_mini
+            use_example_configs delta/FLSUN/kossel_mini
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs delta/generic
+            use_example_configs delta/generic
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs delta/kossel_mini
+            use_example_configs delta/kossel_mini
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs delta/kossel_xl
+            use_example_configs delta/kossel_xl
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Felix
+            use_example_configs Felix
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Felix/DUAL
+            use_example_configs Felix/DUAL
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs FolgerTech/i3-2020
+            use_example_configs FolgerTech/i3-2020
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs gCreate/gMax1.5+
+            use_example_configs gCreate/gMax1.5+
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Geeetech/GT2560
+            use_example_configs Geeetech/GT2560
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            #echo use_example_configs Geeetech/I3_Pro_X-GT2560
+            #use_example_configs Geeetech/I3_Pro_X-GT2560
+            #build_marlin_pio ./ ${TEST_PLATFORM}
+            #restore_configs
+            echo use_example_configs Infitary/i3-M508
+            use_example_configs Infitary/i3-M508
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            use_example_configs Malyan/M200
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Micromake/C1/basic
+            use_example_configs Micromake/C1/basic
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Micromake/C1/enhanced
+            use_example_configs Micromake/C1/enhanced
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs RepRapWorld/Megatronics
+            use_example_configs RepRapWorld/Megatronics
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs RigidBot
+            use_example_configs RigidBot
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs SCARA
+            use_example_configs SCARA
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Velleman/K8200
+            use_example_configs Velleman/K8200
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Velleman/K8400/Dual-head
+            use_example_configs Velleman/K8400/Dual-head
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Velleman/K8400
+            use_example_configs Velleman/K8400
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Wanhao/Duplicator6
+            use_example_configs Wanhao/Duplicator6
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            # Requires manual load of https://github.com/stawel/SlowSoftI2CMaster
+            #use_example_configs wt150
+            #build_marlin_pio ./ ${TEST_PLATFORM}
+            #restore_configs
+            echo testing melzi targets...
+            export TEST_PLATFORM="-e melzi"
+            echo use_example_configs Anet/A6
+            use_example_configs Anet/A6
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Anet/A8
+            use_example_configs Anet/A8
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Creality/CR-10
+            use_example_configs Creality/CR-10
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Malyan/M150
+            use_example_configs Malyan/M150
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs Sanguinololu
+            use_example_configs Sanguinololu
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs TinyBoy2
+            use_example_configs TinyBoy2
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+
+            echo testing rambo targets...
+            export TEST_PLATFORM="-e rambo"
+            echo use_example_configs AlephObjects/TAZ4
+            use_example_configs AlephObjects/TAZ4
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+
+            echo testing at90usb1286_* targets...
+            export TEST_PLATFORM="-e at90usb1286_dfu"
+            #echo se_example_configs delta/kossel_pro
+            #use_example_configs delta/kossel_pro
+            #build_marlin_pio ./ ${TEST_PLATFORM}
+            #restore_configs
+            echo use_example_configs makibox
+            use_example_configs makibox
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+
+            echo testing sanguino_atmega644p targets...
+            export TEST_PLATFORM="-e sanguino_atmega644p"
+            echo use_example_configs tvrrug/Round2
+            use_example_configs tvrrug/Round2
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+
+            echo testing LPC1768 targets...
+            export TEST_PLATFORM="-e LPC1768"
+            echo use_example_configs Mks/Sbase
+            use_example_configs Mks/Sbase
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo testing STM32F1 targets...
+            export TEST_PLATFORM="-e STM32F1"
+            restore_configs
+            echo use_example_configs STM32/STM32F10
+            use_example_configs STM32/STM32F10
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+            echo use_example_configs STM32/stm32f103ret6
+            use_example_configs STM32/stm32f103ret6
+            build_marlin_pio ./ ${TEST_PLATFORM}
+            restore_configs
+
+            echo testing DUE targets...
+            export TEST_PLATFORM="-e DUE"
+            #echo use_example_configs UltiMachine/Archim2
+            #use_example_configs UltiMachine/Archim2
+            #build_marlin_pio ./ ${TEST_PLATFORM}
+            #restore_configs
+
+            #
+            # Remove temp files from dependencies tree prior to caching
+            rm -rf ~/Marlin/.piolibdeps/_tmp_*
+
+            #
+            # Restore the environment
+            #
+            env_restore
+
+      - save_cache:
+          paths:
+          - ~/.platformio
+          - ~/Marlin/.piolibdeps
+          key: v1-dependencies-{{ checksum "~/Marlin/platformio.ini" }}

.editorconfig

@@ -1,19 +0,0 @@
-# editorconfig.org
-root = true
-
-[{*.patch,syntax_test_*}]
-trim_trailing_whitespace = false
-
-[{*.c,*.cpp,*.h}]
-charset = utf-8
-
-[{*.c,*.cpp,*.h,Makefile}]
-trim_trailing_whitespace = true
-insert_final_newline = true
-end_of_line = lf
-indent_style = space
-indent_size = 2
-
-[{*.py,*.conf,*.sublime-project}]
-indent_style = tab
-indent_size = 4

.gitattributes

@@ -17,5 +17,3 @@
 *.png binary
 *.jpg binary
 *.fon binary
-*.bin binary
-*.woff binary

.github/FUNDING.yml

@@ -1,3 +1 @@
-github: [thinkyhead]
-patreon: thinkyhead
-custom: ["https://www.thinkyhead.com/donate-to-marlin"]
+custom: http://www.thinkyhead.com/donate-to-marlin

.github/contributing.md

@@ -34,15 +34,16 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
+* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
 
-If chat is more your speed, you can join the MarlinFirmware Discord server:
+If chat is more your speed, you can join the MarlinFirmware Slack team:
 
-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
-* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
-* Use the `#general` channel for general questions or discussion about Marlin.
-* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
+* Join the Marlin Slack Team
+  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
+  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
+  * Use the `#general` channel for general questions or discussion about Marlin.
+  * Other channels exist for certain topics. Check the channel list.
 
 ## How Can I Contribute?
 
@@ -92,7 +93,7 @@ Before creating a suggestion, please check [this list](#before-submitting-a-sugg
 
 #### Before Submitting a Feature Request
 
-* **Check the [Marlin website](https://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](https://marlinfw.org/docs/configuration/configuration.html).
+* **Check the [Marlin website](http://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](http://marlinfw.org/docs/configuration/configuration.html).
 * **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
 
 #### How Do I Submit A (Good) Feature Request?
@@ -116,12 +117,12 @@ Unsure where to begin contributing to Marlin? You can start by looking through t
 
 ### Pull Requests
 
-Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
 
 * Fill in [the required template](pull_request_template.md).
 * Don't include issue numbers in the PR title.
 * Include pictures, diagrams, and links to videos in your Pull Request to demonstrate your changes, if needed.
-* Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website.
+* Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website.
 * Document new code with clear and concise comments.
 * End all files with a newline.
 
@@ -136,7 +137,7 @@ Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x
 
 ### C++ Coding Standards
 
-* Please read and follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
+* Please read and follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
 
 ### Documentation
 

.github/issue_template.md

@@ -2,13 +2,9 @@
 
 Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
 
-- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
-- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
-- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
-
-Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
 
 -->
 

.github/lock.yml

@@ -1,40 +0,0 @@
-#
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
-#
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: [ 'no-locking' ]
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: >
-  This thread has been automatically locked since there has not been
-  any recent activity after it was closed. Please open a new issue for
-  related bugs.
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: true
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo

.github/pull_request_template.md

@@ -14,10 +14,6 @@ We must be able to understand your proposed change from this description. If we
 
 <!-- What does this fix or improve? -->
 
-### Configurations
-
-<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
-
 ### Related Issues
 
 <!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.github/workflows/test-builds.yml

@@ -1,121 +0,0 @@
-#
-# test-builds.yml
-# Do test builds to catch compile errors
-#
-
-name: CI
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-
-jobs:
-  test_builds:
-    name: Run All Tests
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    strategy:
-      matrix:
-        test-platform:
-        # Base Environments
-
-        - DUE
-        - DUE_archim
-        - esp32
-        - linux_native
-        - mega2560
-        - at90usb1286_dfu
-        - teensy31
-        - teensy35
-        - teensy41
-        - SAMD51_grandcentral_m4
-
-        # Extended AVR Environments
-
-        - FYSETC_F6
-        - mega1280
-        - rambo
-        - sanguino1284p
-        - sanguino644p
-
-        # STM32F1 (Maple) Environments
-
-        - STM32F103RC_btt
-        - STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
-        - STM32F103RC_fysetc
-        - STM32F103RC_meeb
-        - jgaurora_a5s_a1
-        - STM32F103VE_longer
-        - mks_robin
-        - mks_robin_lite
-        - mks_robin_pro
-        - STM32F103RET6_creality
-        - mks_robin_nano35
-
-        # STM32 (ST) Environments
-
-        - STM32F407VE_black
-        - STM32F401VE_STEVAL
-        - BIGTREE_BTT002
-        - BIGTREE_SKR_PRO
-        - BIGTREE_GTR_V1_0
-        - mks_robin_stm32
-        - ARMED
-        - FYSETC_S6
-        - STM32F070CB_malyan
-        - STM32F070RB_malyan
-        - malyan_M300
-        - FLYF407ZG
-        - rumba32
-        - LERDGEX
-        - mks_robin_nano35_stm32
-        - NUCLEO_F767ZI
-        - REMRAM_V1
-
-        # Put lengthy tests last
-
-        - LPC1768
-        - LPC1769
-
-        # Non-working environment tests
-        #- at90usb1286_cdc
-        #- STM32F103CB_malyan
-        #- mks_robin_mini
-
-    steps:
-
-    - name: Select Python 3.7
-      uses: actions/setup-python@v1
-      with:
-        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
-        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
-
-    - name: Install PlatformIO
-      run: |
-        pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
-        platformio update
-
-    - name: Check out the PR
-      uses: actions/checkout@v2
-
-    - name: Run ${{ matrix.test-platform }} Tests
-      run: |
-        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}

.gitignore

@@ -1,6 +1,6 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
 # Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
 # Our automatic versioning scheme generates the following file
@@ -77,6 +77,7 @@ tags
 *.out
 *.app
 
+
 #
 # C
 #
@@ -145,10 +146,7 @@ Marlin/*/*/readme.txt
 Marlin/*/*/*/readme.txt
 Marlin/*/*/*/*/readme.txt
 
-# Secure Credentials
-Configuration_Secure.h
-
-# Visual Studio
+#Visual Studio
 *.sln
 *.vcxproj
 *.vcxproj.user
@@ -159,34 +157,27 @@ __vm/
 .vs/
 vc-fileutils.settings
 
-# Visual Studio Code
+#Visual Studio Code
 .vscode
 .vscode/.browse.c_cpp.db*
 .vscode/c_cpp_properties.json
 .vscode/launch.json
 .vscode/*.db
 
-# cmake
+#cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
 
-# CLion
+#CLion
 cmake-build-*
 
-# Eclipse
+#Eclipse
 .project
 .cproject
 .pydevproject
 .settings
 .classpath
 
-# Python
+#Python
 __pycache__
-
-# IOLogger logs
-*_log.csv
-
-# Simulation / Native
-eeprom.dat
-imgui.ini

.travis.yml

@@ -0,0 +1,51 @@
+dist: bionic
+sudo: false
+
+language: python
+python:
+  - "3.7"
+
+notifications:
+  email: false
+
+env:
+  - TEST_PLATFORM="megaatmega2560"
+  - TEST_PLATFORM="DUE"
+  - TEST_PLATFORM="LPC1768"
+  - TEST_PLATFORM="LPC1769"
+  - TEST_PLATFORM="STM32F1"
+  - TEST_PLATFORM="teensy31"
+  - TEST_PLATFORM="teensy35"
+  - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="esp32"
+  - TEST_PLATFORM="alfawise_U20"
+  - TEST_PLATFORM="black_stm32f407ve"
+  - TEST_PLATFORM="adafruit_grandcentral_m4"
+
+before_install:
+  #
+  # Fetch the tag information for the current branch
+  - git fetch origin --tags
+  #
+  # Publish the buildroot script folder
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
+  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
+
+install:
+  #- pip install -U platformio
+  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+
+before_script:
+  # Update PlatformIO packages
+  - platformio update
+  #
+  # Change current working directory to the build dir
+  - cd ${TRAVIS_BUILD_DIR}
+  #
+  # Generate custom version include
+  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/src/inc
+  - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
+  #
+script:
+  - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

LICENSE

@@ -3,7 +3,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (c) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
+ Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -647,7 +647,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -666,11 +666,12 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
+<http://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+

Makefile

@@ -1,52 +0,0 @@
-help:
-	@echo "Tasks for local development:"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
-	@echo "* tests-single-local:          Run a single test locally"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker-compose"
-	@echo "* tests-all-local:             Run all tests locally"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker-compose"
-	@echo "* setup-local-docker:          Setup local docker-compose"
-	@echo ""
-	@echo "Options for testing:"
-	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
-	@echo "                       test. If you set it to ALL it will run all "
-	@echo "                       tests, but some of them are broken: use "
-	@echo "                       tests-all-* instead to run only the ones that "
-	@echo "                       run on GitHub CI"
-	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
-	@echo "                       the index of the test (1-based)"
-	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
-	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
-	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
-
-tests-single-ci:
-	export GIT_RESET_HARD=true
-	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
-.PHONY: tests-single-ci
-
-tests-single-local:
-	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
-	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
-	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
-.PHONY: tests-single-local
-
-tests-single-local-docker:
-	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
-	docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
-.PHONY: tests-single-local-docker
-
-tests-all-local:
-	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
-	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
-.PHONY: tests-all-local
-
-tests-all-local-docker:
-	docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-.PHONY: tests-all-local-docker
-
-setup-local-docker:
-	docker-compose build
-.PHONY: setup-local-docker

Marlin/Makefile

@@ -14,7 +14,7 @@
 # Detailed instructions for using the makefile:
 #
 #  1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under macOS, this
+#     contains the Arduino installation (for example, under Mac OS X, this
 #     might be /Applications/Arduino.app/Contents/Resources/Java).
 #
 #  2. Modify the line containing "UPLOAD_PORT" to refer to the filename
@@ -22,10 +22,8 @@
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
 #     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
-#  3. Set the line containing "MCU" to match your board's processor. Set
-#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
-#     following command to get a list of correspondences: `avrdude -c alf -p x`
-#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#  3. Set the line containing "MCU" to match your board's processor.
+#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
 #     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
 #     change F_CPU to 8000000. If you are using Gen7 electronics, you
 #     probably need to use 20000000. Either way, you must regenerate
@@ -36,18 +34,18 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings at the top of this file can be overridden from
+# Note that all settings at the top of this file can be overriden from
 # the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
 #
 # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
 #
 # To compile and upload simply add "upload" to the end of the line...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
 #
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
@@ -59,26 +57,7 @@
 #
 
 # This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 1020
-
-ifeq ($(OS),Windows_NT)
-  # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
-else
-  UNAME_S := $(shell uname -s)
-  ifeq ($(UNAME_S),Linux)
-    # Linux
-    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
-    ARDUINO_USER_DIR ?= ${HOME}/Arduino
-  endif
-  ifeq ($(UNAME_S),Darwin)
-    # Darwin (macOS)
-    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
-    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
-    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
-  endif
-endif
+HARDWARE_MOTHERBOARD ?= 11
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
@@ -88,44 +67,35 @@ ARDUINO_VERSION      ?= 106
 # The installed Libraries are in the User folder
 ARDUINO_USER_DIR ?= ${HOME}/Arduino
 
-# You can optionally set a path to the avr-gcc tools.
-# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
+# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
 AVR_TOOLS_PATH ?=
 
-# Programmer configuration
+#Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0
 
-# Directory used to build files in, contains all the build files, from object
-# files to the final hex file on linux it is best to put an absolute path
-# like /home/username/tmp .
+#Directory used to build files in, contains all the build files, from object files to the final hex file
+#on linux it is best to put an absolute path like /home/username/tmp .
 BUILD_DIR          ?= applet
 
 # This defines whether Liquid_TWI2 support will be built
 LIQUID_TWI2        ?= 0
 
-# This defines if Wire is needed
+# this defines if Wire is needed
 WIRE               ?= 0
 
-# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
-# Disabling this (and SPEAKER) saves approximatively 350 bytes of memory.
-TONE               ?= 1
+# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+U8GLIB             ?= 1
 
-# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-U8GLIB             ?= 0
-
-# This defines whether to include the Trinamic TMCStepper library
-TMC                ?= 0
-
-# This defines whether to include the AdaFruit NeoPixel library
-NEOPIXEL           ?= 0
+# this defines whether to include the Trinamic TMCStepper library
+TMC                ?= 1
 
 ############
 # Try to automatically determine whether RELOC_WORKAROUND is needed based
 # on GCC versions:
-#   https://www.avrfreaks.net/comment/1789106#comment-1789106
+#   http://www.avrfreaks.net/comment/1789106#comment-1789106
 
 CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
 CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
@@ -197,379 +167,302 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
+else ifeq ($(HARDWARE_MOTHERBOARD),1103)
 # 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
+else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
+else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 # MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
+else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+else ifeq ($(HARDWARE_MOTHERBOARD),1107)
 # MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+else ifeq ($(HARDWARE_MOTHERBOARD),1108)
 # MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
+else ifeq ($(HARDWARE_MOTHERBOARD),1109)
 # MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
+else ifeq ($(HARDWARE_MOTHERBOARD),1110)
 # zrib V2.0 control board (Chinese knock off RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+# Bigtreetech or BIQU KFB2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+else ifeq ($(HARDWARE_MOTHERBOARD),1114)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),1115)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),1116)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-  MCU              ?= atmega1280
-  PROG_MCU         ?= m1280
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+  MCU ?= atmega1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
 # Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
 # Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
 # Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
 # Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
 # Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
 # Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
 # MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
 # TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
 # TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
 # Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
 # Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+# Fysetc F6
+else ifeq ($(HARDWARE_MOTHERBOARD),1137)
 # Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
 # VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
 # Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
-
-#
-# RAMBo and derivatives
-#
-
-# Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1200)
-# Mini-Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1201)
-# Mini-Rambo 1.0a
-else ifeq ($(HARDWARE_MOTHERBOARD),1202)
-# Einsy Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1203)
-# Einsy Retro
-else ifeq ($(HARDWARE_MOTHERBOARD),1204)
-# abee Scoovo X9H
-else ifeq ($(HARDWARE_MOTHERBOARD),1205)
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 
 #
 # Other ATmega1280, ATmega2560
 #
 
 # Cartesio CN Controls V11
-else ifeq ($(HARDWARE_MOTHERBOARD),1300)
+else ifeq ($(HARDWARE_MOTHERBOARD),1200)
 # Cartesio CN Controls V12
-else ifeq ($(HARDWARE_MOTHERBOARD),1301)
-# Cartesio CN Controls V15
-else ifeq ($(HARDWARE_MOTHERBOARD),1302)
+else ifeq ($(HARDWARE_MOTHERBOARD),1201)
 # Cheaptronic v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1303)
+else ifeq ($(HARDWARE_MOTHERBOARD),1202)
 # Cheaptronic v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1304)
+else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 # Makerbot Mightyboard Revision E
-else ifeq ($(HARDWARE_MOTHERBOARD),1305)
+else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # Megatronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1306)
+else ifeq ($(HARDWARE_MOTHERBOARD),1205)
 # Megatronics v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1307)
+else ifeq ($(HARDWARE_MOTHERBOARD),1206)
 # Megatronics v3.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1308)
+else ifeq ($(HARDWARE_MOTHERBOARD),1207)
 # Megatronics v3.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1309)
+else ifeq ($(HARDWARE_MOTHERBOARD),1208)
 # Megatronics v3.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1310)
+else ifeq ($(HARDWARE_MOTHERBOARD),1209)
+# Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1210)
+# Mini-Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1211)
+# Mini-Rambo 1.0a
+else ifeq ($(HARDWARE_MOTHERBOARD),1212)
+# Einsy Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1213)
+# Einsy Retro
+else ifeq ($(HARDWARE_MOTHERBOARD),1214)
 # Elefu Ra Board (v3)
-else ifeq ($(HARDWARE_MOTHERBOARD),1311)
+else ifeq ($(HARDWARE_MOTHERBOARD),1215)
 # Leapfrog
-else ifeq ($(HARDWARE_MOTHERBOARD),1312)
+else ifeq ($(HARDWARE_MOTHERBOARD),1216)
 # Mega controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1313)
+else ifeq ($(HARDWARE_MOTHERBOARD),1217)
+# abee Scoovo X9H
+else ifeq ($(HARDWARE_MOTHERBOARD),1218)
 # Geeetech GT2560 Rev B for Mecreator2
-else ifeq ($(HARDWARE_MOTHERBOARD),1314)
+else ifeq ($(HARDWARE_MOTHERBOARD),1219)
 # Geeetech GT2560 Rev. A
-else ifeq ($(HARDWARE_MOTHERBOARD),1315)
+else ifeq ($(HARDWARE_MOTHERBOARD),1220)
 # Geeetech GT2560 Rev. A+ (with auto level probe)
-else ifeq ($(HARDWARE_MOTHERBOARD),1316)
+else ifeq ($(HARDWARE_MOTHERBOARD),1221)
 # Geeetech GT2560 Rev B for A10(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1317)
+else ifeq ($(HARDWARE_MOTHERBOARD),1222)
 # Geeetech GT2560 Rev B for A20(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+else ifeq ($(HARDWARE_MOTHERBOARD),1223)
 # Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1320)
+else ifeq ($(HARDWARE_MOTHERBOARD),1224)
 
 #
 # ATmega1281, ATmega2561
 #
 
-# Minitronics v1.0/1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1400)
+else ifeq ($(HARDWARE_MOTHERBOARD),1300)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
-# Silvergate v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1401)
+else ifeq ($(HARDWARE_MOTHERBOARD),1310)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
 
 #
 # Sanguinololu and Derivatives - ATmega644P, ATmega1284P
 #
 
 # Sanguinololu < 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1500)
+else ifeq ($(HARDWARE_MOTHERBOARD),1400)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sanguinololu 1.2 and above
-else ifeq ($(HARDWARE_MOTHERBOARD),1501)
+else ifeq ($(HARDWARE_MOTHERBOARD),1401)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Melzi
-else ifeq ($(HARDWARE_MOTHERBOARD),1502)
+else ifeq ($(HARDWARE_MOTHERBOARD),1402)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Melzi V2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1503)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi with ATmega1284 (MaKr3d version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1504)
+else ifeq ($(HARDWARE_MOTHERBOARD),1403)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi Creality3D board (for CR-10 etc)
-else ifeq ($(HARDWARE_MOTHERBOARD),1505)
+else ifeq ($(HARDWARE_MOTHERBOARD),1404)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi Malyan M150 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1506)
+else ifeq ($(HARDWARE_MOTHERBOARD),1405)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Tronxy X5S
-else ifeq ($(HARDWARE_MOTHERBOARD),1507)
+else ifeq ($(HARDWARE_MOTHERBOARD),1406)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # STB V1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1508)
+else ifeq ($(HARDWARE_MOTHERBOARD),1407)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Azteeg X1
-else ifeq ($(HARDWARE_MOTHERBOARD),1509)
+else ifeq ($(HARDWARE_MOTHERBOARD),1408)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1510)
+else ifeq ($(HARDWARE_MOTHERBOARD),1409)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 
 #
 # Other ATmega644P, ATmega644, ATmega1284P
 #
 
 # Gen3 Monolithic Electronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1600)
+else ifeq ($(HARDWARE_MOTHERBOARD),1500)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen3+
-else ifeq ($(HARDWARE_MOTHERBOARD),1601)
+else ifeq ($(HARDWARE_MOTHERBOARD),1501)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6
-else ifeq ($(HARDWARE_MOTHERBOARD),1602)
+else ifeq ($(HARDWARE_MOTHERBOARD),1502)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6 deluxe
-else ifeq ($(HARDWARE_MOTHERBOARD),1603)
+else ifeq ($(HARDWARE_MOTHERBOARD),1503)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen7 custom (Alfons3 Version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1604)
+else ifeq ($(HARDWARE_MOTHERBOARD),1504)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
   F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1605)
+else ifeq ($(HARDWARE_MOTHERBOARD),1505)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1606)
+else ifeq ($(HARDWARE_MOTHERBOARD),1506)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1607)
+else ifeq ($(HARDWARE_MOTHERBOARD),1507)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
   F_CPU            ?= 20000000
 # Alpha OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1608)
+else ifeq ($(HARDWARE_MOTHERBOARD),1508)
   HARDWARE_VARIANT ?= SanguinoA
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
 # Final OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1609)
+else ifeq ($(HARDWARE_MOTHERBOARD),1509)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sethi 3D_1
-else ifeq ($(HARDWARE_MOTHERBOARD),1610)
+else ifeq ($(HARDWARE_MOTHERBOARD),1510)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 
 #
 # Teensyduino - AT90USB1286, AT90USB1286P
 #
 
 # Teensylu
-else ifeq ($(HARDWARE_MOTHERBOARD),1700)
+else ifeq ($(HARDWARE_MOTHERBOARD),1600)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1701)
+else ifeq ($(HARDWARE_MOTHERBOARD),1601)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard Revision F (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1702)
+else ifeq ($(HARDWARE_MOTHERBOARD),1602)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Brainwave (AT90USB646)
-else ifeq ($(HARDWARE_MOTHERBOARD),1703)
+else ifeq ($(HARDWARE_MOTHERBOARD),1603)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb646
-  PROG_MCU         ?= usb646
 # Brainwave Pro (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1704)
+else ifeq ($(HARDWARE_MOTHERBOARD),1604)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # SAV Mk-I (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1705)
+else ifeq ($(HARDWARE_MOTHERBOARD),1605)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Teensy++2.0 (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1706)
+else ifeq ($(HARDWARE_MOTHERBOARD),1606)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # 5DPrint D8 Driver Board
-else ifeq ($(HARDWARE_MOTHERBOARD),1707)
+else ifeq ($(HARDWARE_MOTHERBOARD),1607)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 
 # UltiMachine Archim1 (with DRV8825 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3023)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3024)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
 # if you are setting this to something other than 16MHz
-# Do not put the UL suffix, it's done later on.
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
@@ -579,8 +472,7 @@ IS_MCU ?= 1
 ifeq ($(IS_MCU),1)
   # Set to arduino, ATmega2560 if not yet set.
   HARDWARE_VARIANT ?= arduino
-  MCU              ?= atmega2560
-  PROG_MCU         ?= m2560
+  MCU ?= atmega2560
 
   TOOL_PREFIX = avr
   MCU_FLAGS   = -mmcu=$(MCU)
@@ -611,36 +503,27 @@ VPATH += $(BUILD_DIR)
 VPATH += $(HARDWARE_SRC)
 
 ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
 endif
 
 ifeq ($(IS_MCU),1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
 
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
-
 ifeq ($(LIQUID_TWI2), 1)
-  WIRE   = 1
-  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
 endif
 ifeq ($(WIRE), 1)
-  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
@@ -712,23 +595,13 @@ ifeq ($(WIRE), 1)
   LIB_CXXSRC += Wire.cpp
 endif
 
-ifeq ($(TONE), 1)
-  LIB_CXXSRC += Tone.cpp
-endif
-
 ifeq ($(U8GLIB), 1)
   LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
-    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
-    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
-    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
-    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
-    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
-    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
@@ -770,23 +643,17 @@ REMOVE = rm -f
 MV = mv -f
 
 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
+CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS      += -DUSB_SERIAL
+  CDEFS  += -DUSB_SERIAL
   LIB_SRC    += usb.c pins_teensy.c
   LIB_CXXSRC += usb_api.cpp
 
 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
-  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
-  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
-
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
-    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
-    PluggableUSB.cpp USBCore.cpp
-
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 
   ifeq ($(U8GLIB), 1)
@@ -807,25 +674,21 @@ CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
 CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
 CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
+CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
           -fshort-enums -ffunction-sections -fdata-sections
 ifneq ($(HARDWARE_MOTHERBOARD),)
   CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
-
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
 CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
 CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
 CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
 ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-
 ifeq ($(HARDWARE_VARIANT), archim)
   LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
   LD_SUFFIX = $(LDLIBS)
-
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
-  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
   LD_PREFIX = -Wl,--gc-sections,--relax
   LDFLAGS   = -lm
@@ -841,7 +704,7 @@ else
   AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
   -b$(UPLOAD_RATE)
 
 # Since Marlin 2.0, the source files may be distributed into several
@@ -942,7 +805,7 @@ extcoff: $(TARGET).elf
 
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -956,7 +819,7 @@ extcoff: $(TARGET).elf
 
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
 
 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"

Marlin/Marlin.ino

@@ -1,8 +1,9 @@
-/*==============================================================================
+/*
+================================================================================
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2018 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -11,33 +12,30 @@
 Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
 To configure Marlin you must edit Configuration.h and Configuration_adv.h
-located in the root 'Marlin' folder. Check our Configurations repository to
-see if there's a more suitable starting-point for your specific hardware.
+located in the root 'Marlin' folder. Check the config/examples folder to see if
+there's a more suitable starting-point for your specific hardware.
 
 Before diving in, we recommend the following essential links:
 
 Marlin Firmware Official Website
 
-  - https://marlinfw.org/
+  - http://marlinfw.org/
     The official Marlin Firmware website contains the most up-to-date
     documentation. Contributions are always welcome!
 
 Configuration
 
-  - https://github.com/MarlinFirmware/Configurations
-    Example configurations for several printer models.
-
   - https://www.youtube.com/watch?v=3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
 
-  - https://marlinfw.org/docs/configuration/configuration.html
+  - http://marlinfw.org/docs/configuration/configuration.html
     Marlin's configuration options are explained in more detail here.
 
 Getting Help
 
-  - https://reprap.org/forum/list.php?415
+  - http://forums.reprap.org/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 
@@ -47,11 +45,9 @@ Getting Help
 
 Contributing
 
-  - https://marlinfw.org/docs/development/contributing.html
+  - http://marlinfw.org/docs/development/contributing.html
     If you'd like to contribute to Marlin, read this first!
 
-  - https://marlinfw.org/docs/development/coding_standards.html
+  - http://marlinfw.org/docs/development/coding_standards.html
     Before submitting code get to know the Coding Standards.
-
-
-------------------------------------------------------------------------------*/
+*/

Marlin/Version.h

@@ -1,76 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-////////////////////////////
-// VENDOR VERSION EXAMPLE //
-////////////////////////////
-
-/**
- * Marlin release version identifier
- */
-#define SHORT_BUILD_VERSION "2.0.7_SX1"
-
-/**
- * Verbose version identifier which should contain a reference to the location
- * from where the binary was downloaded or the source code was compiled.
- */
-#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
-
-/**
- * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
- * here we define this default string as the date where the latest release
- * version was tagged.
- */
-#define STRING_DISTRIBUTION_DATE "2021-01-03"
-
-/**
- * Defines a generic printer name to be output to the LCD after booting Marlin.
- */
-#define MACHINE_NAME "TM3D SX4"
-
-/**
- * The SOURCE_CODE_URL is the location where users will find the Marlin Source
- * Code which is installed on the device. In most cases —unless the manufacturer
- * has a distinct Github fork— the Source Code URL should just be the main
- * Marlin repository.
- */
-#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/TM_SX4_2.0"
-
-/**
- * Default generic printer UUID.
- */
-//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
-
-/**
- * The WEBSITE_URL is the location where users can get more information such as
- * documentation about a specific Marlin release.
- */
-#define WEBSITE_URL "tinymachines3d.com"
-
-/**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
- */
-//#define USB_DEVICE_VENDOR_ID           0x0000
-//#define USB_DEVICE_PRODUCT_ID          0x0000
-//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -29,65 +29,78 @@
  *  - http://www.marlinfw.org/tools/u8glib/converter.html
  *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
  */
+#include <avr/pgmspace.h>
 
 #define CUSTOM_BOOTSCREEN_TIMEOUT   2500
 #define CUSTOM_BOOTSCREEN_BMPWIDTH  128
-#define CUSTOM_BOOTSCREEN_INVERTED
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
 
 const unsigned char custom_start_bmp[] PROGMEM = {
-  B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,
-  B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,
-  B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
-  B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-  B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
-  B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111,
-  B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111,
-  B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111,
-  B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111,
-  B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111,
-  B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
-  B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111,
-  B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
-  B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111,
-  B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111,
-  B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111,
-  B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111,
-  B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111,
-  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111,
-  B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111,
-  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
-  B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-  B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
-  B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
-  B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-  B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
-  B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-  B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-  B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111,
-  B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111,
-  B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111,
-  B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011,
-  B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011,
-  B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011,
-  B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011,
-  B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111,
-  B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111,
-  B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF,
+0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF,
+0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F,
+0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F,
+0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F,
+0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F,
+0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F,
+0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F,
+0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F,
+0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F,
+0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7,
+0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7,
+0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3,
+0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7,
+0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
 };
+
+
+

Marlin/lib/readme.txt

@@ -1,36 +0,0 @@
-
-This directory is intended for the project specific (private) libraries.
-PlatformIO will compile them to static libraries and link to executable file.
-
-The source code of each library should be placed in separate directory, like
-"lib/private_lib/[here are source files]".
-
-For example, see how can be organized `Foo` and `Bar` libraries:
-
-|--lib
-|  |--Bar
-|  |  |--docs
-|  |  |--examples
-|  |  |--src
-|  |     |- Bar.c
-|  |     |- Bar.h
-|  |--Foo
-|  |  |- Foo.c
-|  |  |- Foo.h
-|  |- readme.txt --> THIS FILE
-|- platformio.ini
-|--src
-   |- main.c
-
-Then in `src/main.c` you should use:
-
-#include <Foo.h>
-#include <Bar.h>
-
-// rest H/C/CPP code
-
-PlatformIO will find your libraries automatically, configure preprocessor's
-include paths and build them.
-
-More information about PlatformIO Library Dependency Finder
-- https://docs.platformio.org/page/librarymanager/ldf.html

Marlin/src/HAL/AVR/HAL.h

@@ -1,195 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../shared/Marduino.h"
-#include "../shared/HAL_SPI.h"
-#include "fastio.h"
-#include "watchdog.h"
-#include "math.h"
-
-#ifdef USBCON
-  #include <HardwareSerial.h>
-#else
-  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
-  #include "MarlinSerial.h"
-#endif
-
-#include <stdint.h>
-#include <util/delay.h>
-#include <avr/eeprom.h>
-#include <avr/pgmspace.h>
-#include <avr/interrupt.h>
-#include <avr/io.h>
-
-#ifndef pgm_read_ptr
-  // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
-  // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
-  #define pgm_read_ptr_far(address_long) (void*)__ELPM_word((uint32_t)(address_long))
-  #define pgm_read_ptr_near(address_short) (void*)__LPM_word((uint16_t)(address_short))
-  #define pgm_read_ptr(address_short) pgm_read_ptr_near(address_short)
-#endif
-
-// ------------------------
-// Defines
-// ------------------------
-
-// AVR PROGMEM extension for sprintf_P
-#define S_FMT "%S"
-
-// AVR PROGMEM extension for string define
-#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
-
-#ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
-  #define CRITICAL_SECTION_END()    SREG = _sreg
-#endif
-#define ISRS_ENABLED() TEST(SREG, SREG_I)
-#define ENABLE_ISRS()  sei()
-#define DISABLE_ISRS() cli()
-
-// ------------------------
-// Types
-// ------------------------
-
-typedef int8_t pin_t;
-
-#define SHARED_SERVOS HAS_SERVOS
-#define HAL_SERVO_LIB Servo
-
-// ------------------------
-// Public Variables
-// ------------------------
-
-//extern uint8_t MCUSR;
-
-// Serial ports
-#ifdef USBCON
-  #define MYSERIAL0 TERN(BLUETOOTH, bluetoothSerial, Serial)
-#else
-  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #endif
-  #define MYSERIAL0 customizedSerial1
-
-  #ifdef SERIAL_PORT_2
-    #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
-    #endif
-    #define MYSERIAL1 customizedSerial2
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #endif
-  #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
-  #endif
-#endif
-
-// ------------------------
-// Public functions
-// ------------------------
-
-void HAL_init();
-
-//void cli();
-
-//void _delay_ms(const int delay);
-
-inline void HAL_clear_reset_source() { MCUSR = 0; }
-inline uint8_t HAL_get_reset_source() { return MCUSR; }
-
-inline void HAL_reboot() {}  // reboot the board or restart the bootloader
-
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic push
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-extern "C" int freeMemory();
-
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic pop
-#endif
-
-// ADC
-#ifdef DIDR2
-  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
-#else
-  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
-#endif
-
-inline void HAL_adc_init() {
-  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
-  DIDR0 = 0;
-  #ifdef DIDR2
-    DIDR2 = 0;
-  #endif
-}
-
-#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
-#ifdef MUX5
-  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
-#else
-  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
-#endif
-
-#define HAL_ADC_VREF        5.0
-#define HAL_ADC_RESOLUTION 10
-#define HAL_READ_ADC()  ADC
-#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
-
-#define GET_PIN_MAP_PIN(index) index
-#define GET_PIN_MAP_INDEX(pin) pin
-#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
-
-#define HAL_SENSITIVE_PINS 0, 1
-
-#ifdef __AVR_AT90USB1286__
-  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
-#endif
-
-// AVR compatibility
-#define strtof strtod
-
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-
-/**
- *  set_pwm_frequency
- *  Sets the frequency of the timer corresponding to the provided pin
- *  as close as possible to the provided desired frequency. Internally
- *  calculates the required waveform generation mode, prescaler and
- *  resolution values required and sets the timer registers accordingly.
- *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
- *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
- */
-void set_pwm_frequency(const pin_t pin, int f_desired);
-
-/**
- * set_pwm_duty
- *  Sets the PWM duty cycle of the provided pin to the provided value
- *  Optionally allows inverting the duty cycle [default = false]
- *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
- */
-void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -1,802 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * MarlinSerial.cpp - Hardware serial library for Wiring
- * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
- *
- * Modified 23 November 2006 by David A. Mellis
- * Modified 28 September 2010 by Mark Sproul
- * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
- * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
- * Modified 10 June 2018 by Eduardo José Tagle (See #10991)
- * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
- */
-
-#ifdef __AVR__
-
-// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
-
-#include "../../inc/MarlinConfig.h"
-
-#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
-
-#include "MarlinSerial.h"
-#include "../../MarlinCore.h"
-
-#if ENABLED(DIRECT_STEPPING)
-  #include "../../feature/direct_stepping.h"
-#endif
-
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
-template<typename Cfg> bool     MarlinSerial<Cfg>::_written = false;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_dropped_bytes = 0;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_buffer_overruns = 0;
-template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_framing_errors = 0;
-template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() asm volatile("": : :"memory");
-
-#include "../../feature/e_parser.h"
-
-// "Atomically" read the RX head index value without disabling interrupts:
-// This MUST be called with RX interrupts enabled, and CAN'T be called
-// from the RX ISR itself!
-template<typename Cfg>
-FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
-  if (Cfg::RX_SIZE > 256) {
-    // Keep reading until 2 consecutive reads return the same value,
-    // meaning there was no update in-between caused by an interrupt.
-    // This works because serial RX interrupts happen at a slower rate
-    // than successive reads of a variable, so 2 consecutive reads with
-    // the same value means no interrupt updated it.
-    ring_buffer_pos_t vold, vnew = rx_buffer.head;
-    sw_barrier();
-    do {
-      vold = vnew;
-      vnew = rx_buffer.head;
-      sw_barrier();
-    } while (vold != vnew);
-    return vnew;
-  }
-  else {
-    // With an 8bit index, reads are always atomic. No need for special handling
-    return rx_buffer.head;
-  }
-}
-
-template<typename Cfg>
-volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
-template<typename Cfg>
-volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
-
-// Set RX tail index, taking into account the RX ISR could interrupt
-//  the write to this variable in the middle - So a backup strategy
-//  is used to ensure reads of the correct values.
-//    -Must NOT be called from the RX ISR -
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
-  if (Cfg::RX_SIZE > 256) {
-    // Store the new value in the backup
-    rx_tail_value_backup = value;
-    sw_barrier();
-    // Flag we are about to change the true value
-    rx_tail_value_not_stable = true;
-    sw_barrier();
-    // Store the new value
-    rx_buffer.tail = value;
-    sw_barrier();
-    // Signal the new value is completely stored into the value
-    rx_tail_value_not_stable = false;
-    sw_barrier();
-  }
-  else
-    rx_buffer.tail = value;
-}
-
-// Get the RX tail index, taking into account the read could be
-//  interrupting in the middle of the update of that index value
-//    -Called from the RX ISR -
-template<typename Cfg>
-FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
-  if (Cfg::RX_SIZE > 256) {
-    // If the true index is being modified, return the backup value
-    if (rx_tail_value_not_stable) return rx_tail_value_backup;
-  }
-  // The true index is stable, return it
-  return rx_buffer.tail;
-}
-
-// (called with RX interrupts disabled)
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
-
-  static EmergencyParser::State emergency_state; // = EP_RESET
-
-  // This must read the R_UCSRA register before reading the received byte to detect error causes
-  if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
-  if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
-  if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
-
-  // Read the character from the USART
-  uint8_t c = R_UDR;
-
-  #if ENABLED(DIRECT_STEPPING)
-    if (page_manager.maybe_store_rxd_char(c)) return;
-  #endif
-
-  // Get the tail - Nothing can alter its value while this ISR is executing, but there's
-  // a chance that this ISR interrupted the main process while it was updating the index.
-  // The backup mechanism ensures the correct value is always returned.
-  const ring_buffer_pos_t t = atomic_read_rx_tail();
-
-  // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
-  ring_buffer_pos_t h = rx_buffer.head;
-
-  // Get the next element
-  ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-  if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
-
-  // If the character is to be stored at the index just before the tail
-  // (such that the head would advance to the current tail), the RX FIFO is
-  // full, so don't write the character or advance the head.
-  if (i != t) {
-    rx_buffer.buffer[h] = c;
-    h = i;
-  }
-  else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-    --rx_dropped_bytes;
-
-  if (Cfg::MAX_RX_QUEUED) {
-    // Calculate count of bytes stored into the RX buffer
-    const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-    // Keep track of the maximum count of enqueued bytes
-    NOLESS(rx_max_enqueued, rx_count);
-  }
-
-  if (Cfg::XONOFF) {
-    // If the last char that was sent was an XON
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
-
-      // Bytes stored into the RX buffer
-      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-      // If over 12.5% of RX buffer capacity, send XOFF before running out of
-      // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
-      // and stop sending bytes. This translates to 13mS propagation time.
-      if (rx_count >= (Cfg::RX_SIZE) / 8) {
-
-        // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
-        // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
-        // to be in the middle of trying to disable the RX interrupt in the main program, eventually the
-        // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
-        // the sending of the XOFF char is to send it HERE AND NOW.
-
-        // About to send the XOFF char
-        xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
-
-        // Wait until the TX register becomes empty and send it - Here there could be a problem
-        // - While waiting for the TX register to empty, the RX register could receive a new
-        //   character. This must also handle that situation!
-        while (!B_UDRE) {
-
-          if (B_RXC) {
-            // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
-
-            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-            // Read the character from the USART
-            c = R_UDR;
-
-            if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
-
-            // If the character is to be stored at the index just before the tail
-            // (such that the head would advance to the current tail), the FIFO is
-            // full, so don't write the character or advance the head.
-            if (i != t) {
-              rx_buffer.buffer[h] = c;
-              h = i;
-            }
-            else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-              --rx_dropped_bytes;
-          }
-          sw_barrier();
-        }
-
-        R_UDR = XOFF_CHAR;
-
-        // Clear the TXC bit -- "can be cleared by writing a one to its bit
-        // location". This makes sure flush() won't return until the bytes
-        // actually got written
-        B_TXC = 1;
-
-        // At this point there could be a race condition between the write() function
-        // and this sending of the XOFF char. This interrupt could happen between the
-        // wait to be empty TX buffer loop and the actual write of the character. Since
-        // the TX buffer is full because it's sending the XOFF char, the only way to be
-        // sure the write() function will succeed is to wait for the XOFF char to be
-        // completely sent. Since an extra character could be received during the wait
-        // it must also be handled!
-        while (!B_UDRE) {
-
-          if (B_RXC) {
-            // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
-
-            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-
-            // Read the character from the USART
-            c = R_UDR;
-
-            if (Cfg::EMERGENCYPARSER)
-              emergency_parser.update(emergency_state, c);
-
-            // If the character is to be stored at the index just before the tail
-            // (such that the head would advance to the current tail), the FIFO is
-            // full, so don't write the character or advance the head.
-            if (i != t) {
-              rx_buffer.buffer[h] = c;
-              h = i;
-            }
-            else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
-              --rx_dropped_bytes;
-          }
-          sw_barrier();
-        }
-
-        // At this point everything is ready. The write() function won't
-        // have any issues writing to the UART TX register if it needs to!
-      }
-    }
-  }
-
-  // Store the new head value - The main loop will retry until the value is stable
-  rx_buffer.head = h;
-}
-
-// (called with TX irqs disabled)
-template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq() {
-  if (Cfg::TX_SIZE > 0) {
-    // Read positions
-    uint8_t t = tx_buffer.tail;
-    const uint8_t h = tx_buffer.head;
-
-    if (Cfg::XONOFF) {
-      // If an XON char is pending to be sent, do it now
-      if (xon_xoff_state == XON_CHAR) {
-
-        // Send the character
-        R_UDR = XON_CHAR;
-
-        // clear the TXC bit -- "can be cleared by writing a one to its bit
-        // location". This makes sure flush() won't return until the bytes
-        // actually got written
-        B_TXC = 1;
-
-        // Remember we sent it.
-        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-
-        // If nothing else to transmit, just disable TX interrupts.
-        if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-
-        return;
-      }
-    }
-
-    // If nothing to transmit, just disable TX interrupts. This could
-    // happen as the result of the non atomicity of the disabling of RX
-    // interrupts that could end reenabling TX interrupts as a side effect.
-    if (h == t) {
-      B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-      return;
-    }
-
-    // There is something to TX, Send the next byte
-    const uint8_t c = tx_buffer.buffer[t];
-    t = (t + 1) & (Cfg::TX_SIZE - 1);
-    R_UDR = c;
-    tx_buffer.tail = t;
-
-    // Clear the TXC bit (by writing a one to its bit location).
-    // Ensures flush() won't return until the bytes are actually written/
-    B_TXC = 1;
-
-    // Disable interrupts if there is nothing to transmit following this byte
-    if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
-  }
-}
-
-// Public Methods
-template<typename Cfg>
-void MarlinSerial<Cfg>::begin(const long baud) {
-  uint16_t baud_setting;
-  bool useU2X = true;
-
-  #if F_CPU == 16000000UL && SERIAL_PORT == 0
-    // Hard-coded exception for compatibility with the bootloader shipped
-    // with the Duemilanove and previous boards, and the firmware on the
-    // 8U2 on the Uno and Mega 2560.
-    if (baud == 57600) useU2X = false;
-  #endif
-
-  R_UCSRA = 0;
-  if (useU2X) {
-    B_U2X = 1;
-    baud_setting = (F_CPU / 4 / baud - 1) / 2;
-  }
-  else
-    baud_setting = (F_CPU / 8 / baud - 1) / 2;
-
-  // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
-  R_UBRRH = baud_setting >> 8;
-  R_UBRRL = baud_setting;
-
-  B_RXEN = 1;
-  B_TXEN = 1;
-  B_RXCIE = 1;
-  if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
-  _written = false;
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::end() {
-  B_RXEN = 0;
-  B_TXEN = 0;
-  B_RXCIE = 0;
-  B_UDRIE = 0;
-}
-
-template<typename Cfg>
-int MarlinSerial<Cfg>::peek() {
-  const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
-  return h == t ? -1 : rx_buffer.buffer[t];
-}
-
-template<typename Cfg>
-int MarlinSerial<Cfg>::read() {
-  const ring_buffer_pos_t h = atomic_read_rx_head();
-
-  // Read the tail. Main thread owns it, so it is safe to directly read it
-  ring_buffer_pos_t t = rx_buffer.tail;
-
-  // If nothing to read, return now
-  if (h == t) return -1;
-
-  // Get the next char
-  const int v = rx_buffer.buffer[t];
-  t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
-
-  // Advance tail - Making sure the RX ISR will always get an stable value, even
-  // if it interrupts the writing of the value of that variable in the middle.
-  atomic_set_rx_tail(t);
-
-  if (Cfg::XONOFF) {
-    // If the XOFF char was sent, or about to be sent...
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-      // Get count of bytes in the RX buffer
-      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
-      if (rx_count < (Cfg::RX_SIZE) / 10) {
-        if (Cfg::TX_SIZE > 0) {
-          // Signal we want an XON character to be sent.
-          xon_xoff_state = XON_CHAR;
-          // Enable TX ISR. Non atomic, but it will eventually enable them
-          B_UDRIE = 1;
-        }
-        else {
-          // If not using TX interrupts, we must send the XON char now
-          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-          while (!B_UDRE) sw_barrier();
-          R_UDR = XON_CHAR;
-        }
-      }
-    }
-  }
-
-  return v;
-}
-
-template<typename Cfg>
-typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
-  const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
-  return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::flush() {
-
-  // Set the tail to the head:
-  //  - Read the RX head index in a safe way. (See atomic_read_rx_head.)
-  //  - Set the tail, making sure the RX ISR will always get a stable value, even
-  //    if it interrupts the writing of the value of that variable in the middle.
-  atomic_set_rx_tail(atomic_read_rx_head());
-
-  if (Cfg::XONOFF) {
-    // If the XOFF char was sent, or about to be sent...
-    if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
-      if (Cfg::TX_SIZE > 0) {
-        // Signal we want an XON character to be sent.
-        xon_xoff_state = XON_CHAR;
-        // Enable TX ISR. Non atomic, but it will eventually enable it.
-        B_UDRIE = 1;
-      }
-      else {
-        // If not using TX interrupts, we must send the XON char now
-        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
-        while (!B_UDRE) sw_barrier();
-        R_UDR = XON_CHAR;
-      }
-    }
-  }
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::write(const uint8_t c) {
-  if (Cfg::TX_SIZE == 0) {
-
-    _written = true;
-    while (!B_UDRE) sw_barrier();
-    R_UDR = c;
-
-  }
-  else {
-
-    _written = true;
-
-    // If the TX interrupts are disabled and the data register
-    // is empty, just write the byte to the data register and
-    // be done. This shortcut helps significantly improve the
-    // effective datarate at high (>500kbit/s) bitrates, where
-    // interrupt overhead becomes a slowdown.
-    // Yes, there is a race condition between the sending of the
-    // XOFF char at the RX ISR, but it is properly handled there
-    if (!B_UDRIE && B_UDRE) {
-      R_UDR = c;
-
-      // clear the TXC bit -- "can be cleared by writing a one to its bit
-      // location". This makes sure flush() won't return until the bytes
-      // actually got written
-      B_TXC = 1;
-      return;
-    }
-
-    const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
-
-    // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!ISRS_ENABLED()) {
-
-      // Make room by polling if it is possible to transmit, and do so!
-      while (i == tx_buffer.tail) {
-
-        // If we can transmit another byte, do it.
-        if (B_UDRE) _tx_udr_empty_irq();
-
-        // Make sure compiler rereads tx_buffer.tail
-        sw_barrier();
-      }
-    }
-    else {
-      // Interrupts are enabled, just wait until there is space
-      while (i == tx_buffer.tail) sw_barrier();
-    }
-
-    // Store new char. head is always safe to move
-    tx_buffer.buffer[tx_buffer.head] = c;
-    tx_buffer.head = i;
-
-    // Enable TX ISR - Non atomic, but it will eventually enable TX ISR
-    B_UDRIE = 1;
-  }
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::flushTX() {
-
-  if (Cfg::TX_SIZE == 0) {
-    // No bytes written, no need to flush. This special case is needed since there's
-    // no way to force the TXC (transmit complete) bit to 1 during initialization.
-    if (!_written) return;
-
-    // Wait until everything was transmitted
-    while (!B_TXC) sw_barrier();
-
-    // At this point nothing is queued anymore (DRIE is disabled) and
-    // the hardware finished transmission (TXC is set).
-
-  }
-  else {
-
-    // No bytes written, no need to flush. This special case is needed since there's
-    // no way to force the TXC (transmit complete) bit to 1 during initialization.
-    if (!_written) return;
-
-    // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!ISRS_ENABLED()) {
-
-      // Wait until everything was transmitted - We must do polling, as interrupts are disabled
-      while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
-
-        // If there is more space, send an extra character
-        if (B_UDRE) _tx_udr_empty_irq();
-
-        sw_barrier();
-      }
-
-    }
-    else {
-      // Wait until everything was transmitted
-      while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
-    }
-
-    // At this point nothing is queued anymore (DRIE is disabled) and
-    // the hardware finished transmission (TXC is set).
-  }
-}
-
-/**
- * Imports from print.h
- */
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(char c, int base) {
-  print((long)c, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(int n, int base) {
-  print((long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(long n, int base) {
-  if (base == 0) write(n);
-  else if (base == 10) {
-    if (n < 0) { print('-'); n = -n; }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println() {
-  print('\r');
-  print('\n');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const String& s) {
-  print(s);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const char c[]) {
-  print(c);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
-}
-
-// Hookup ISR handlers
-ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _RX_vect)) {
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
-}
-
-ISR(SERIAL_REGNAME(USART, SERIAL_PORT, _UDRE_vect)) {
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
-}
-
-// Preinstantiate
-template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
-
-// Instantiate
-MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-
-#ifdef SERIAL_PORT_2
-
-  // Hookup ISR handlers
-  ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _RX_vect)) {
-    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, SERIAL_PORT_2, _UDRE_vect)) {
-    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
-
-  // Instantiate
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-
-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>;
-
-  // Instantiate
-  MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
-
-#endif
-
-#ifdef LCD_SERIAL_PORT
-
-  ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::store_rxd_char();
-  }
-
-  ISR(SERIAL_REGNAME(USART, LCD_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>::_tx_udr_empty_irq();
-  }
-
-  // Preinstantiate
-  template class MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>>;
-
-  // Instantiate
-  MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
-
-  #if HAS_DGUS_LCD
-    template<typename Cfg>
-    typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
-      const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
-                              h = tx_buffer.head;  // next pos for queue.
-      int ret = t - h - 1;
-      if (ret < 0) ret += Cfg::TX_SIZE + 1;
-      return ret;
-    }
-  #endif
-
-#endif
-
-#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
-
-// For AT90USB targets use the UART for BT interfacing
-#if defined(USBCON) && ENABLED(BLUETOOTH)
-  HardwareSerial bluetoothSerial;
-#endif
-
-#endif // __AVR__

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -1,261 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Endstop Interrupts
- *
- * Without endstop interrupts the endstop pins must be polled continually in
- * the temperature-ISR via endstops.update(), most of the time finding no change.
- * With this feature endstops.update() is called only when we know that at
- * least one endstop has changed state, saving valuable CPU cycles.
- *
- * This feature only works when all used endstop pins can generate either an
- * 'external interrupt' or a 'pin change interrupt'.
- *
- * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
- * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
- */
-
-#include "../../module/endstops.h"
-
-#include <stdint.h>
-
-// One ISR for all EXT-Interrupts
-void endstop_ISR() { endstops.update(); }
-
-/**
- * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
- *
- * These macros for the Arduino MEGA do not include the two connected pins on Port J (D14, D15).
- * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
- * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
- */
-#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
-
-  #define digitalPinHasPCICR(p)   (WITHIN(p, 10, 15) || WITHIN(p, 50, 53) || WITHIN(p, 62, 69))
-
-  #undef  digitalPinToPCICR
-  #define digitalPinToPCICR(p)    (digitalPinHasPCICR(p) ? (&PCICR) : nullptr)
-
-  #undef  digitalPinToPCICRbit
-  #define digitalPinToPCICRbit(p) (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
-                                   WITHIN(p, 14, 15) ? 1 : \
-                                   WITHIN(p, 62, 69) ? 2 : \
-                                   0)
-
-  #undef  digitalPinToPCMSK
-  #define digitalPinToPCMSK(p)    (WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? (&PCMSK0) : \
-                                   WITHIN(p, 14, 15) ? (&PCMSK1) : \
-                                   WITHIN(p, 62, 69) ? (&PCMSK2) : \
-                                   nullptr)
-
-  #undef  digitalPinToPCMSKbit
-  #define digitalPinToPCMSKbit(p) (WITHIN(p, 10, 13) ? ((p) - 6) : \
-                                   (p) == 14 || (p) == 51 ? 2 : \
-                                   (p) == 15 || (p) == 52 ? 1 : \
-                                   (p) == 50 ? 3 : \
-                                   (p) == 53 ? 0 : \
-                                   WITHIN(p, 62, 69) ? ((p) - 62) : \
-                                   0)
-
-#elif defined(__AVR_ATmega164A__) || defined(__AVR_ATmega164P__) || defined(__AVR_ATmega324A__) || \
-      defined(__AVR_ATmega324P__) || defined(__AVR_ATmega324PA__) || defined(__AVR_ATmega324PB__) || \
-      defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || \
-      defined(__AVR_ATmega1284P__)
-
-  #define digitalPinHasPCICR(p)   WITHIN(p, 0, NUM_DIGITAL_PINS)
-
-#else
-
-  #error "Unsupported AVR variant!"
-
-#endif
-
-
-// Install Pin change interrupt for a pin. Can be called multiple times.
-void pciSetup(const int8_t pin) {
-  if (digitalPinHasPCICR(pin)) {
-    SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
-    SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
-    SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
-  }
-}
-
-// Handlers for pin change interrupts
-#ifdef PCINT0_vect
-  ISR(PCINT0_vect) { endstop_ISR(); }
-#endif
-
-#ifdef PCINT1_vect
-  ISR(PCINT1_vect, ISR_ALIASOF(PCINT0_vect));
-#endif
-
-#ifdef PCINT2_vect
-  ISR(PCINT2_vect, ISR_ALIASOF(PCINT0_vect));
-#endif
-
-#ifdef PCINT3_vect
-  ISR(PCINT3_vect, ISR_ALIASOF(PCINT0_vect));
-#endif
-
-void setup_endstop_interrupts() {
-  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #if HAS_X_MAX
-    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(X_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(X_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_X_MIN
-    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(X_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(X_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Y_MAX
-    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Y_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Y_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Y_MIN
-    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Y_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Y_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Z_MAX
-    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Z_MIN
-    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_X2_MAX
-    #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(X2_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(X2_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_X2_MIN
-    #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(X2_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(X2_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Y2_MAX
-    #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Y2_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Y2_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Y2_MIN
-    #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Y2_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Y2_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Z2_MAX
-    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z2_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z2_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Z2_MIN
-    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z2_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z2_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Z3_MAX
-    #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z3_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z3_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Z3_MIN
-    #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z3_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z3_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Z4_MAX
-    #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z4_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z4_MAX_PIN);
-    #endif
-  #endif
-  #if HAS_Z4_MIN
-    #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z4_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z4_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_Z_MIN_PROBE_PIN
-    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(Z_MIN_PROBE_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(Z_MIN_PROBE_PIN);
-    #endif
-  #endif
-
-  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
-}

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -1,206 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * The PWM module is only used to generate interrupts at specified times. It
- * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
- * that interrupt.
- *
- * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
- * not have obvious ripple on the Vref signals.
- *
- * The data structures are setup to minimize the computation done by the ISR which
- * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
- *
- * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
- * signals are set active when this counter overflows and resets to zero.  The compare
- * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
- * When counter 0 matches the compare value then that channel generates an interrupt.
- * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
- *
- * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
- */
-
-#include "../../../inc/MarlinConfig.h"
-
-#if MB(PRINTRBOARD_G2)
-
-#include "G2_PWM.h"
-
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-  #define G2_PWM_X 1
-#else
-  #define G2_PWM_X 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-  #define G2_PWM_Y 1
-#else
-  #define G2_PWM_Y 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-  #define G2_PWM_Z 1
-#else
-  #define G2_PWM_Z 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
-#define G2_MASK_X(V) (G2_PWM_X * (V))
-#define G2_MASK_Y(V) (G2_PWM_Y * (V))
-#define G2_MASK_Z(V) (G2_PWM_Z * (V))
-#define G2_MASK_E(V) (G2_PWM_E * (V))
-
-volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
-                  *SODR_B = &PIOB->PIO_SODR,
-                  *CODR_A = &PIOA->PIO_CODR,
-                  *CODR_B = &PIOB->PIO_CODR;
-
-PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
-
-void Stepper::digipot_init() {
-
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
-  #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
-  #endif
-  #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
-  #endif
-  #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
-  #endif
-
-  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
-  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
-  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
-
-  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
-
-  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
-
-  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
-  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
-  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
-  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
-  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
-  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
-  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
-
-  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
-
-  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
-  PWM->PWM_IER2 = PWM_IER2_CMPM0
-    | G2_MASK_X(PWM_IER2_CMPM1)
-    | G2_MASK_Y(PWM_IER2_CMPM2)
-    | G2_MASK_Z(PWM_IER2_CMPM3)
-    | G2_MASK_E(PWM_IER2_CMPM4)
-  ; // generate interrupt on compare event
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
-
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
-
-  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
-    | G2_MASK_X(PWM_SCM_SYNC1)
-    | G2_MASK_Y(PWM_SCM_SYNC2)
-    | G2_MASK_Z(PWM_SCM_SYNC3)
-    | G2_MASK_E(PWM_SCM_SYNC4)
-  ; // sync 1-4 with 0, use mode 0 for updates
-
-  PWM->PWM_ENA = PWM_ENA_CHID0
-    | G2_MASK_X(PWM_ENA_CHID1)
-    | G2_MASK_Y(PWM_ENA_CHID2)
-    | G2_MASK_Z(PWM_ENA_CHID3)
-    | G2_MASK_E(PWM_ENA_CHID4)
-  ; // enable channels used by G2
-
-  PWM->PWM_IER1 = PWM_IER1_CHID0
-    | G2_MASK_X(PWM_IER1_CHID1)
-    | G2_MASK_Y(PWM_IER1_CHID2)
-    | G2_MASK_Z(PWM_IER1_CHID3)
-    | G2_MASK_E(PWM_IER1_CHID4)
-  ; // enable interrupts for channels used by G2
-
-  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
-  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
-}
-
-void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
-
-  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
-
-  switch (driver) {
-    case 0:
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      break;
-    case 1:
-      if (G2_PWM_Z) {
-        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
-        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-    default:
-      if (G2_PWM_E) {
-        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
-        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-  }
-}
-
-volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
-
-void PWM_Handler() {
-  PWM_ISR1_STATUS = PWM->PWM_ISR1;
-  PWM_ISR2_STATUS = PWM->PWM_ISR2;
-  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
-    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
-    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
-    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
-    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
-  }
-  else {
-    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
-    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
-    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
-    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
-  }
-  return;
-}
-
-#endif // PRINTRBOARD_G2

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -1,18 +0,0 @@
-#
-# Set upload_command
-#
-#  Windows: bossac.exe
-#  Other: leave unchanged
-#
-
-import platform
-current_OS = platform.system()
-
-if current_OS == 'Windows':
-
-	Import("env")
-
-	# Use bossac.exe on Windows
-	env.Replace(
-	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
-	)

Marlin/src/HAL/ESP32/HAL.h

@@ -1,179 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * HAL for Espressif ESP32 WiFi
- */
-
-#define CPU_32_BIT
-
-#include <stdint.h>
-
-#include "../shared/Marduino.h"
-#include "../shared/math_32bit.h"
-#include "../shared/HAL_SPI.h"
-
-#include "fastio.h"
-#include "watchdog.h"
-#include "i2s.h"
-
-#if ENABLED(WIFISUPPORT)
-  #include "WebSocketSerial.h"
-#endif
-
-#if ENABLED(ESP3D_WIFISUPPORT)
-  #include "esp3dlib.h"
-#endif
-
-#include "FlushableHardwareSerial.h"
-
-// ------------------------
-// Defines
-// ------------------------
-
-extern portMUX_TYPE spinlock;
-
-#define MYSERIAL0 flushableSerial
-
-#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
-  #if ENABLED(ESP3D_WIFISUPPORT)
-    #define MYSERIAL1 Serial2Socket
-  #else
-    #define MYSERIAL1 webSocketSerial
-  #endif
-#endif
-
-#define CRITICAL_SECTION_START() portENTER_CRITICAL(&spinlock)
-#define CRITICAL_SECTION_END()   portEXIT_CRITICAL(&spinlock)
-#define ISRS_ENABLED() (spinlock.owner == portMUX_FREE_VAL)
-#define ENABLE_ISRS()  if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock)
-#define DISABLE_ISRS() portENTER_CRITICAL(&spinlock)
-
-// Fix bug in pgm_read_ptr
-#undef pgm_read_ptr
-#define pgm_read_ptr(addr) (*(addr))
-
-// ------------------------
-// Types
-// ------------------------
-
-typedef int16_t pin_t;
-
-#define HAL_SERVO_LIB Servo
-
-// ------------------------
-// Public Variables
-// ------------------------
-
-/** result of last ADC conversion */
-extern uint16_t HAL_adc_result;
-
-// ------------------------
-// Public functions
-// ------------------------
-
-// clear reset reason
-void HAL_clear_reset_source();
-
-// reset reason
-uint8_t HAL_get_reset_source();
-
-inline void HAL_reboot() {}  // reboot the board or restart the bootloader
-
-void _delay_ms(int delay);
-
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic push
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-int freeMemory();
-
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic pop
-#endif
-
-void analogWrite(pin_t pin, int value);
-
-// ADC
-#define HAL_ANALOG_SELECT(pin)
-
-void HAL_adc_init();
-
-#define HAL_ADC_VREF         3.3
-#define HAL_ADC_RESOLUTION  10
-#define HAL_START_ADC(pin)  HAL_adc_start_conversion(pin)
-#define HAL_READ_ADC()      HAL_adc_result
-#define HAL_ADC_READY()     true
-
-void HAL_adc_start_conversion(const uint8_t adc_pin);
-
-#define GET_PIN_MAP_PIN(index) index
-#define GET_PIN_MAP_INDEX(pin) pin
-#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
-
-// Enable hooks into idle and setup for HAL
-#define HAL_IDLETASK 1
-#define BOARD_INIT() HAL_init_board();
-void HAL_idletask();
-void HAL_init();
-void HAL_init_board();
-
-//
-// Delay in cycles (used by DELAY_NS / DELAY_US)
-//
-FORCE_INLINE static void DELAY_CYCLES(uint32_t x) {
-  unsigned long start, ccount, stop;
-
-  /**
-   * It's important to care for race conditions (and overflows) here.
-   * Race condition example: If `stop` calculates to being close to the upper boundary of
-   * `uint32_t` and if at the same time a longer loop interruption kicks in (e.g. due to other
-   * FreeRTOS tasks or interrupts), `ccount` might overflow (and therefore be below `stop` again)
-   * without the loop ever being able to notice that `ccount` had already been above `stop` once
-   * (and that therefore the number of cycles to delay has already passed).
-   * As DELAY_CYCLES (through DELAY_NS / DELAY_US) is used by software SPI bit banging to drive
-   * LCDs and therefore might be called very, very often, this seemingly improbable situation did
-   * actually happen in reality. It resulted in apparently random print pauses of ~17.9 seconds
-   * (0x100000000 / 240 MHz) or multiples thereof, essentially ruining the current print by causing
-   * large blobs of filament.
-   */
-
-  __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (start) );
-  stop = start + x;
-  ccount = start;
-
-  if (stop >= start) {
-    // no overflow, so only loop while in between start and stop:
-    // 0x00000000 -----------------start****stop-- 0xFFFFFFFF
-    while (ccount >= start && ccount < stop) {
-      __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
-    }
-  }
-  else {
-    // stop did overflow, so only loop while outside of stop and start:
-    // 0x00000000 **stop-------------------start** 0xFFFFFFFF
-    while (ccount >= start || ccount < stop) {
-      __asm__ __volatile__ ( "rsr     %0, ccount" : "=a" (ccount) );
-    }
-  }
-
-}

Marlin/src/HAL/ESP32/eeprom.cpp

@@ -1,57 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_ESP32
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(EEPROM_SETTINGS)
-
-#include "../shared/eeprom_api.h"
-#include <EEPROM.h>
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-
-bool PersistentStore::access_start()  { return EEPROM.begin(MARLIN_EEPROM_SIZE); }
-bool PersistentStore::access_finish() { EEPROM.end(); return true; }
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  for (size_t i = 0; i < size; i++) {
-    EEPROM.write(pos++, value[i]);
-    crc16(crc, &value[i], 1);
-  }
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  for (size_t i = 0; i < size; i++) {
-    uint8_t c = EEPROM.read(pos++);
-    if (writing) value[i] = c;
-    crc16(crc, &c, 1);
-  }
-  return false;
-}
-
-#endif // EEPROM_SETTINGS
-#endif // ARDUINO_ARCH_ESP32

Marlin/src/HAL/ESP32/spi_pins.h

@@ -1,24 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#define SD_SS_PIN   SDSS
-#define SD_SCK_PIN  18
-#define SD_MISO_PIN 19
-#define SD_MOSI_PIN 23

Marlin/src/HAL/ESP32/watchdog.h

@@ -1,38 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-    esp_err_t esp_task_wdt_reset();
-
-#ifdef __cplusplus
-  }
-#endif
-
-// Initialize watchdog with a 4 second interrupt time
-void watchdog_init();
-
-// Reset watchdog.
-inline void HAL_watchdog_refresh() { esp_task_wdt_reset(); }

Marlin/src/HAL/HAL.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,41 +16,11 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 #include "platforms.h"
 
-#ifndef GCC_VERSION
-  #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
-#endif
-
 #include HAL_PATH(.,HAL.h)
-
-#ifdef SERIAL_PORT_2
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
-#endif
-
-#define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
-
-#ifndef I2C_ADDRESS
-  #define I2C_ADDRESS(A) uint8_t(A)
-#endif
-
-// Needed for AVR sprintf_P PROGMEM extension
-#ifndef S_FMT
-  #define S_FMT "%s"
-#endif
-
-// String helper
-#ifndef PGMSTR
-  #define PGMSTR(NAM,STR) const char NAM[] = STR
-#endif
-
-inline void watchdog_refresh() {
-  TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
-}

Marlin/src/HAL/HAL_AVR/HAL.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"
@@ -34,7 +35,7 @@
 // Public functions
 // ------------------------
 
-void HAL_init() {
+void HAL_init(void) {
   // Init Servo Pins
   #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
   #if HAS_SERVO_0

Marlin/src/HAL/HAL_AVR/HAL.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -14,12 +14,46 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #pragma once
 
+#include "../shared/Marduino.h"
+#include "../shared/HAL_SPI.h"
+#include "fastio_AVR.h"
+#include "watchdog_AVR.h"
+#include "math_AVR.h"
+
+#ifdef USBCON
+  #include "HardwareSerial.h"
+#else
+  #define HardwareSerial_h // Hack to prevent HardwareSerial.h header inclusion
+  #include "MarlinSerial.h"
+#endif
+
 #include <stdint.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include <avr/pgmspace.h>
+#include <avr/interrupt.h>
+#include <avr/io.h>
+
+// ------------------------
+// Defines
+// ------------------------
+
+//#define analogInputToDigitalPin(IO) IO
+
+#ifndef CRITICAL_SECTION_START
+  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli()
+  #define CRITICAL_SECTION_END    SREG = _sreg
+#endif
+#define ISRS_ENABLED() TEST(SREG, SREG_I)
+#define ENABLE_ISRS()  sei()
+#define DISABLE_ISRS() cli()
+
+// On AVR this is in math.h?
+//#define square(x) ((x)*(x))
 
 // ------------------------
 // Types
@@ -28,21 +62,71 @@
 typedef uint16_t hal_timer_t;
 #define HAL_TIMER_TYPE_MAX 0xFFFF
 
+typedef int8_t pin_t;
+
+#define SHARED_SERVOS HAS_SERVOS
+#define HAL_SERVO_LIB Servo
+
 // ------------------------
-// Defines
+// Public Variables
 // ------------------------
 
+//extern uint8_t MCUSR;
+
+// Serial ports
+#ifdef USBCON
+  #if ENABLED(BLUETOOTH)
+    #define MYSERIAL0 bluetoothSerial
+  #else
+    #define MYSERIAL0 Serial
+  #endif
+  #define NUM_SERIAL 1
+#else
+  #if !WITHIN(SERIAL_PORT, -1, 3)
+    #error "SERIAL_PORT must be from -1 to 3"
+  #endif
+
+  #define MYSERIAL0 customizedSerial1
+
+  #ifdef SERIAL_PORT_2
+    #if !WITHIN(SERIAL_PORT_2, -1, 3)
+      #error "SERIAL_PORT_2 must be from -1 to 3"
+    #elif SERIAL_PORT_2 == SERIAL_PORT
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
+    #endif
+    #define NUM_SERIAL 2
+    #define MYSERIAL1 customizedSerial2
+  #else
+    #define NUM_SERIAL 1
+  #endif
+#endif
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_init(void);
+
+//void cli(void);
+
+//void _delay_ms(const int delay);
+
+inline void HAL_clear_reset_source(void) { MCUSR = 0; }
+inline uint8_t HAL_get_reset_source(void) { return MCUSR; }
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+extern "C" {
+  int freeMemory(void);
+}
+#pragma GCC diagnostic pop
+
+// timers
 #define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
 
-#ifndef STEP_TIMER_NUM
-  #define STEP_TIMER_NUM        1
-#endif
-#ifndef PULSE_TIMER_NUM
-  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
-#endif
-#ifndef TEMP_TIMER_NUM
-  #define TEMP_TIMER_NUM        0
-#endif
+#define STEP_TIMER_NUM          1
+#define TEMP_TIMER_NUM          0
+#define PULSE_TIMER_NUM         STEP_TIMER_NUM
 
 #define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
 
@@ -62,7 +146,8 @@ typedef uint16_t hal_timer_t;
 #define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0B)
 #define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0B)
 
-FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
+FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
+  UNUSED(frequency);
   switch (timer_num) {
     case STEP_TIMER_NUM:
       // waveform generation = 0100 = CTC
@@ -113,12 +198,10 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
 #define HAL_timer_isr_epilogue(TIMER_NUM)
 
 /* 18 cycles maximum latency */
-#ifndef HAL_STEP_TIMER_ISR
-
 #define HAL_STEP_TIMER_ISR() \
-extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER1_COMPA_vect() { \
+extern "C" void TIMER1_COMPA_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER1_COMPA_vect_bottom (void) asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER1_COMPA_vect (void) { \
   __asm__ __volatile__ ( \
     A("push r16")                      /* 2 Save R16 */ \
     A("in r16, __SREG__")              /* 1 Get SREG */ \
@@ -185,17 +268,13 @@ void TIMER1_COMPA_vect() { \
     : \
   ); \
 } \
-void TIMER1_COMPA_vect_bottom()
-
-#endif // HAL_STEP_TIMER_ISR
-
-#ifndef HAL_TEMP_TIMER_ISR
+void TIMER1_COMPA_vect_bottom(void)
 
 /* 14 cycles maximum latency */
 #define HAL_TEMP_TIMER_ISR() \
-extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER0_COMPB_vect_bottom()  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER0_COMPB_vect() { \
+extern "C" void TIMER0_COMPB_vect (void) __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER0_COMPB_vect_bottom(void)  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER0_COMPB_vect (void) { \
   __asm__ __volatile__ ( \
     A("push r16")                       /* 2 Save R16 */ \
     A("in r16, __SREG__")               /* 1 Get SREG */ \
@@ -255,6 +334,61 @@ void TIMER0_COMPB_vect() { \
     : \
   ); \
 } \
-void TIMER0_COMPB_vect_bottom()
+void TIMER0_COMPB_vect_bottom(void)
 
-#endif // HAL_TEMP_TIMER_ISR
+// ADC
+#ifdef DIDR2
+  #define HAL_ANALOG_SELECT(pin) do{ if (pin < 8) SBI(DIDR0, pin); else SBI(DIDR2, pin & 0x07); }while(0)
+#else
+  #define HAL_ANALOG_SELECT(pin) do{ SBI(DIDR0, pin); }while(0)
+#endif
+
+inline void HAL_adc_init(void) {
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
+  DIDR0 = 0;
+  #ifdef DIDR2
+    DIDR2 = 0;
+  #endif
+}
+
+#define SET_ADMUX_ADCSRA(pin) ADMUX = _BV(REFS0) | (pin & 0x07); SBI(ADCSRA, ADSC)
+#ifdef MUX5
+  #define HAL_START_ADC(pin) if (pin > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+#else
+  #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin)
+#endif
+
+#define HAL_READ_ADC()  ADC
+#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
+
+#define GET_PIN_MAP_PIN(index) index
+#define GET_PIN_MAP_INDEX(pin) pin
+#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
+
+#define HAL_SENSITIVE_PINS 0, 1
+
+#ifdef __AVR_AT90USB1286__
+  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
+#endif
+
+// AVR compatibility
+#define strtof strtod
+
+/**
+ *  set_pwm_frequency
+ *  Sets the frequency of the timer corresponding to the provided pin
+ *  as close as possible to the provided desired frequency. Internally
+ *  calculates the required waveform generation mode, prescaler and
+ *  resolution values required and sets the timer registers accordingly.
+ *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
+ *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
+
+/**
+ * set_pwm_duty
+ *  Sets the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);

Marlin/src/HAL/HAL_AVR/HAL_spi_AVR.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -33,18 +33,18 @@
 
 #include "../../inc/MarlinConfig.h"
 
-void spiBegin() {
-  OUT_WRITE(SD_SS_PIN, HIGH);
-  SET_OUTPUT(SD_SCK_PIN);
-  SET_INPUT(SD_MISO_PIN);
-  SET_OUTPUT(SD_MOSI_PIN);
+void spiBegin(void) {
+  OUT_WRITE(SS_PIN, HIGH);
+  SET_OUTPUT(SCK_PIN);
+  SET_INPUT(MISO_PIN);
+  SET_OUTPUT(MOSI_PIN);
 
   #if DISABLED(SOFTWARE_SPI)
     // SS must be in output mode even it is not chip select
-    //SET_OUTPUT(SD_SS_PIN);
+    //SET_OUTPUT(SS_PIN);
     // set SS high - may be chip select for another SPI device
     //#if SET_SPI_SS_HIGH
-      //WRITE(SD_SS_PIN, HIGH);
+      //WRITE(SS_PIN, HIGH);
     //#endif
     // set a default rate
     spiInit(1);
@@ -81,7 +81,7 @@ void spiBegin() {
   }
 
   /** SPI receive a byte */
-  uint8_t spiRec() {
+  uint8_t spiRec(void) {
     SPDR = 0xFF;
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
     return SPDR;
@@ -184,10 +184,15 @@ void spiBegin() {
   // nop to tune soft SPI timing
   #define nop asm volatile ("\tnop\n")
 
-  void spiInit(uint8_t) { /* do nothing */ }
+  // Set SPI rate
+  void spiInit(uint8_t spiRate) {
+    UNUSED(spiRate);  // nothing to do
+  }
 
   // Begin SPI transaction, set clock, bit order, data mode
-  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { /* do nothing */ }
+  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
+    UNUSED(spiBeginTransaction);  // nothing to do
+  }
 
   // Soft SPI receive byte
   uint8_t spiRec() {
@@ -195,19 +200,19 @@ void spiBegin() {
     // no interrupts during byte receive - about 8µs
     cli();
     // output pin high - like sending 0xFF
-    WRITE(SD_MOSI_PIN, HIGH);
+    WRITE(MOSI_PIN, HIGH);
 
-    LOOP_L_N(i, 8) {
-      WRITE(SD_SCK_PIN, HIGH);
+    for (uint8_t i = 0; i < 8; i++) {
+      WRITE(SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
       nop;
 
       data <<= 1;
 
-      if (READ(SD_MISO_PIN)) data |= 1;
+      if (READ(MISO_PIN)) data |= 1;
 
-      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SCK_PIN, LOW);
     }
 
     sei();
@@ -224,11 +229,11 @@ void spiBegin() {
   void spiSend(uint8_t data) {
     // no interrupts during byte send - about 8µs
     cli();
-    LOOP_L_N(i, 8) {
-      WRITE(SD_SCK_PIN, LOW);
-      WRITE(SD_MOSI_PIN, data & 0x80);
+    for (uint8_t i = 0; i < 8; i++) {
+      WRITE(SCK_PIN, LOW);
+      WRITE(MOSI_PIN, data & 0x80);
       data <<= 1;
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
     }
 
     nop; // hold SCK high for a few ns
@@ -236,7 +241,7 @@ void spiBegin() {
     nop;
     nop;
 
-    WRITE(SD_SCK_PIN, LOW);
+    WRITE(SCK_PIN, LOW);
 
     sei();
   }

Marlin/src/HAL/HAL_AVR/MarlinSerial.cpp

@@ -0,0 +1,765 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * MarlinSerial.cpp - Hardware serial library for Wiring
+ * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+ *
+ * Modified 23 November 2006 by David A. Mellis
+ * Modified 28 September 2010 by Mark Sproul
+ * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
+ * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
+ * Modified 10 June 2018 by Eduardo José Tagle (See #10991)
+ * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
+ */
+
+#ifdef __AVR__
+
+// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
+
+#include "../../inc/MarlinConfig.h"
+
+#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
+
+  #include "MarlinSerial.h"
+  #include "../../Marlin.h"
+
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
+  template<typename Cfg> bool     MarlinSerial<Cfg>::_written = false;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::xon_xoff_state = MarlinSerial<Cfg>::XON_XOFF_CHAR_SENT | MarlinSerial<Cfg>::XON_CHAR;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_dropped_bytes = 0;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_buffer_overruns = 0;
+  template<typename Cfg> uint8_t  MarlinSerial<Cfg>::rx_framing_errors = 0;
+  template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::rx_max_enqueued = 0;
+
+  // A SW memory barrier, to ensure GCC does not overoptimize loops
+  #define sw_barrier() asm volatile("": : :"memory");
+
+  #include "../../feature/emergency_parser.h"
+
+  // "Atomically" read the RX head index value without disabling interrupts:
+  // This MUST be called with RX interrupts enabled, and CAN'T be called
+  // from the RX ISR itself!
+  template<typename Cfg>
+  FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_head() {
+    if (Cfg::RX_SIZE > 256) {
+      // Keep reading until 2 consecutive reads return the same value,
+      // meaning there was no update in-between caused by an interrupt.
+      // This works because serial RX interrupts happen at a slower rate
+      // than successive reads of a variable, so 2 consecutive reads with
+      // the same value means no interrupt updated it.
+      ring_buffer_pos_t vold, vnew = rx_buffer.head;
+      sw_barrier();
+      do {
+        vold = vnew;
+        vnew = rx_buffer.head;
+        sw_barrier();
+      } while (vold != vnew);
+      return vnew;
+    }
+    else {
+      // With an 8bit index, reads are always atomic. No need for special handling
+      return rx_buffer.head;
+    }
+  }
+
+  template<typename Cfg>
+  volatile bool MarlinSerial<Cfg>::rx_tail_value_not_stable = false;
+  template<typename Cfg>
+  volatile uint16_t MarlinSerial<Cfg>::rx_tail_value_backup = 0;
+
+  // Set RX tail index, taking into account the RX ISR could interrupt
+  //  the write to this variable in the middle - So a backup strategy
+  //  is used to ensure reads of the correct values.
+  //    -Must NOT be called from the RX ISR -
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::atomic_set_rx_tail(typename MarlinSerial<Cfg>::ring_buffer_pos_t value) {
+    if (Cfg::RX_SIZE > 256) {
+      // Store the new value in the backup
+      rx_tail_value_backup = value;
+      sw_barrier();
+      // Flag we are about to change the true value
+      rx_tail_value_not_stable = true;
+      sw_barrier();
+      // Store the new value
+      rx_buffer.tail = value;
+      sw_barrier();
+      // Signal the new value is completely stored into the value
+      rx_tail_value_not_stable = false;
+      sw_barrier();
+    }
+    else
+      rx_buffer.tail = value;
+  }
+
+  // Get the RX tail index, taking into account the read could be
+  //  interrupting in the middle of the update of that index value
+  //    -Called from the RX ISR -
+  template<typename Cfg>
+  FORCE_INLINE typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::atomic_read_rx_tail() {
+    if (Cfg::RX_SIZE > 256) {
+      // If the true index is being modified, return the backup value
+      if (rx_tail_value_not_stable) return rx_tail_value_backup;
+    }
+    // The true index is stable, return it
+    return rx_buffer.tail;
+  }
+
+  // (called with RX interrupts disabled)
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
+
+    static EmergencyParser::State emergency_state; // = EP_RESET
+
+    // Get the tail - Nothing can alter its value while this ISR is executing, but there's
+    // a chance that this ISR interrupted the main process while it was updating the index.
+    // The backup mechanism ensures the correct value is always returned.
+    const ring_buffer_pos_t t = atomic_read_rx_tail();
+
+    // Get the head pointer - This ISR is the only one that modifies its value, so it's safe to read here
+    ring_buffer_pos_t h = rx_buffer.head;
+
+    // Get the next element
+    ring_buffer_pos_t i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+    // This must read the R_UCSRA register before reading the received byte to detect error causes
+    if (Cfg::DROPPED_RX && B_DOR && !++rx_dropped_bytes) --rx_dropped_bytes;
+    if (Cfg::RX_OVERRUNS && B_DOR && !++rx_buffer_overruns) --rx_buffer_overruns;
+    if (Cfg::RX_FRAMING_ERRORS && B_FE && !++rx_framing_errors) --rx_framing_errors;
+
+    // Read the character from the USART
+    uint8_t c = R_UDR;
+
+    if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
+
+    // If the character is to be stored at the index just before the tail
+    // (such that the head would advance to the current tail), the RX FIFO is
+    // full, so don't write the character or advance the head.
+    if (i != t) {
+      rx_buffer.buffer[h] = c;
+      h = i;
+    }
+    else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+      --rx_dropped_bytes;
+
+    if (Cfg::MAX_RX_QUEUED) {
+      // Calculate count of bytes stored into the RX buffer
+      const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+      // Keep track of the maximum count of enqueued bytes
+      NOLESS(rx_max_enqueued, rx_count);
+    }
+
+    if (Cfg::XONOFF) {
+      // If the last char that was sent was an XON
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
+
+        // Bytes stored into the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+        // If over 12.5% of RX buffer capacity, send XOFF before running out of
+        // RX buffer space .. 325 bytes @ 250kbits/s needed to let the host react
+        // and stop sending bytes. This translates to 13mS propagation time.
+        if (rx_count >= (Cfg::RX_SIZE) / 8) {
+
+          // At this point, definitely no TX interrupt was executing, since the TX ISR can't be preempted.
+          // Don't enable the TX interrupt here as a means to trigger the XOFF char, because if it happens
+          // to be in the middle of trying to disable the RX interrupt in the main program, eventually the
+          // enabling of the TX interrupt could be undone. The ONLY reliable thing this can do to ensure
+          // the sending of the XOFF char is to send it HERE AND NOW.
+
+          // About to send the XOFF char
+          xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+
+          // Wait until the TX register becomes empty and send it - Here there could be a problem
+          // - While waiting for the TX register to empty, the RX register could receive a new
+          //   character. This must also handle that situation!
+          while (!B_UDRE) {
+
+            if (B_RXC) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+              // Read the character from the USART
+              c = R_UDR;
+
+              if (Cfg::EMERGENCYPARSER) emergency_parser.update(emergency_state, c);
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+                --rx_dropped_bytes;
+            }
+            sw_barrier();
+          }
+
+          R_UDR = XOFF_CHAR;
+
+          // Clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          B_TXC = 1;
+
+          // At this point there could be a race condition between the write() function
+          // and this sending of the XOFF char. This interrupt could happen between the
+          // wait to be empty TX buffer loop and the actual write of the character. Since
+          // the TX buffer is full because it's sending the XOFF char, the only way to be
+          // sure the write() function will succeed is to wait for the XOFF char to be
+          // completely sent. Since an extra character could be received during the wait
+          // it must also be handled!
+          while (!B_UDRE) {
+
+            if (B_RXC) {
+              // A char arrived while waiting for the TX buffer to be empty - Receive and process it!
+
+              i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+
+              // Read the character from the USART
+              c = R_UDR;
+
+              if (Cfg::EMERGENCYPARSER)
+                emergency_parser.update(emergency_state, c);
+
+              // If the character is to be stored at the index just before the tail
+              // (such that the head would advance to the current tail), the FIFO is
+              // full, so don't write the character or advance the head.
+              if (i != t) {
+                rx_buffer.buffer[h] = c;
+                h = i;
+              }
+              else if (Cfg::DROPPED_RX && !++rx_dropped_bytes)
+                --rx_dropped_bytes;
+            }
+            sw_barrier();
+          }
+
+          // At this point everything is ready. The write() function won't
+          // have any issues writing to the UART TX register if it needs to!
+        }
+      }
+    }
+
+    // Store the new head value - The main loop will retry until the value is stable
+    rx_buffer.head = h;
+  }
+
+  // (called with TX irqs disabled)
+  template<typename Cfg>
+  FORCE_INLINE void MarlinSerial<Cfg>::_tx_udr_empty_irq(void) {
+    if (Cfg::TX_SIZE > 0) {
+      // Read positions
+      uint8_t t = tx_buffer.tail;
+      const uint8_t h = tx_buffer.head;
+
+      if (Cfg::XONOFF) {
+        // If an XON char is pending to be sent, do it now
+        if (xon_xoff_state == XON_CHAR) {
+
+          // Send the character
+          R_UDR = XON_CHAR;
+
+          // clear the TXC bit -- "can be cleared by writing a one to its bit
+          // location". This makes sure flush() won't return until the bytes
+          // actually got written
+          B_TXC = 1;
+
+          // Remember we sent it.
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+
+          // If nothing else to transmit, just disable TX interrupts.
+          if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+
+          return;
+        }
+      }
+
+      // If nothing to transmit, just disable TX interrupts. This could
+      // happen as the result of the non atomicity of the disabling of RX
+      // interrupts that could end reenabling TX interrupts as a side effect.
+      if (h == t) {
+        B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+        return;
+      }
+
+      // There is something to TX, Send the next byte
+      const uint8_t c = tx_buffer.buffer[t];
+      t = (t + 1) & (Cfg::TX_SIZE - 1);
+      R_UDR = c;
+      tx_buffer.tail = t;
+
+      // Clear the TXC bit (by writing a one to its bit location).
+      // Ensures flush() won't return until the bytes are actually written/
+      B_TXC = 1;
+
+      // Disable interrupts if there is nothing to transmit following this byte
+      if (h == t) B_UDRIE = 0; // (Non-atomic, could be reenabled by the main program, but eventually this will succeed)
+    }
+  }
+
+  // Public Methods
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::begin(const long baud) {
+    uint16_t baud_setting;
+    bool useU2X = true;
+
+    #if F_CPU == 16000000UL && SERIAL_PORT == 0
+      // Hard-coded exception for compatibility with the bootloader shipped
+      // with the Duemilanove and previous boards, and the firmware on the
+      // 8U2 on the Uno and Mega 2560.
+      if (baud == 57600) useU2X = false;
+    #endif
+
+    R_UCSRA = 0;
+    if (useU2X) {
+      B_U2X = 1;
+      baud_setting = (F_CPU / 4 / baud - 1) / 2;
+    }
+    else
+      baud_setting = (F_CPU / 8 / baud - 1) / 2;
+
+    // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
+    R_UBRRH = baud_setting >> 8;
+    R_UBRRL = baud_setting;
+
+    B_RXEN = 1;
+    B_TXEN = 1;
+    B_RXCIE = 1;
+    if (Cfg::TX_SIZE > 0) B_UDRIE = 0;
+    _written = false;
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::end() {
+    B_RXEN = 0;
+    B_TXEN = 0;
+    B_RXCIE = 0;
+    B_UDRIE = 0;
+  }
+
+  template<typename Cfg>
+  int MarlinSerial<Cfg>::peek(void) {
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+    return h == t ? -1 : rx_buffer.buffer[t];
+  }
+
+  template<typename Cfg>
+  int MarlinSerial<Cfg>::read(void) {
+    const ring_buffer_pos_t h = atomic_read_rx_head();
+
+    // Read the tail. Main thread owns it, so it is safe to directly read it
+    ring_buffer_pos_t t = rx_buffer.tail;
+
+    // If nothing to read, return now
+    if (h == t) return -1;
+
+    // Get the next char
+    const int v = rx_buffer.buffer[t];
+    t = (ring_buffer_pos_t)(t + 1) & (Cfg::RX_SIZE - 1);
+
+    // Advance tail - Making sure the RX ISR will always get an stable value, even
+    // if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(t);
+
+    if (Cfg::XONOFF) {
+      // If the XOFF char was sent, or about to be sent...
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        // Get count of bytes in the RX buffer
+        const ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(h - t) & (ring_buffer_pos_t)(Cfg::RX_SIZE - 1);
+        if (rx_count < (Cfg::RX_SIZE) / 10) {
+          if (Cfg::TX_SIZE > 0) {
+            // Signal we want an XON character to be sent.
+            xon_xoff_state = XON_CHAR;
+            // Enable TX ISR. Non atomic, but it will eventually enable them
+            B_UDRIE = 1;
+          }
+          else {
+            // If not using TX interrupts, we must send the XON char now
+            xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+            while (!B_UDRE) sw_barrier();
+            R_UDR = XON_CHAR;
+          }
+        }
+      }
+    }
+
+    return v;
+  }
+
+  template<typename Cfg>
+  typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available(void) {
+    const ring_buffer_pos_t h = atomic_read_rx_head(), t = rx_buffer.tail;
+    return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::flush(void) {
+
+    // Set the tail to the head:
+    //  - Read the RX head index in a safe way. (See atomic_read_rx_head.)
+    //  - Set the tail, making sure the RX ISR will always get a stable value, even
+    //    if it interrupts the writing of the value of that variable in the middle.
+    atomic_set_rx_tail(atomic_read_rx_head());
+
+    if (Cfg::XONOFF) {
+      // If the XOFF char was sent, or about to be sent...
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        if (Cfg::TX_SIZE > 0) {
+          // Signal we want an XON character to be sent.
+          xon_xoff_state = XON_CHAR;
+          // Enable TX ISR. Non atomic, but it will eventually enable it.
+          B_UDRIE = 1;
+        }
+        else {
+          // If not using TX interrupts, we must send the XON char now
+          xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+          while (!B_UDRE) sw_barrier();
+          R_UDR = XON_CHAR;
+        }
+      }
+    }
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::write(const uint8_t c) {
+    if (Cfg::TX_SIZE == 0) {
+
+      _written = true;
+      while (!B_UDRE) sw_barrier();
+      R_UDR = c;
+
+    }
+    else {
+
+      _written = true;
+
+      // If the TX interrupts are disabled and the data register
+      // is empty, just write the byte to the data register and
+      // be done. This shortcut helps significantly improve the
+      // effective datarate at high (>500kbit/s) bitrates, where
+      // interrupt overhead becomes a slowdown.
+      // Yes, there is a race condition between the sending of the
+      // XOFF char at the RX ISR, but it is properly handled there
+      if (!B_UDRIE && B_UDRE) {
+        R_UDR = c;
+
+        // clear the TXC bit -- "can be cleared by writing a one to its bit
+        // location". This makes sure flush() won't return until the bytes
+        // actually got written
+        B_TXC = 1;
+        return;
+      }
+
+      const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
+
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Make room by polling if it is possible to transmit, and do so!
+        while (i == tx_buffer.tail) {
+
+          // If we can transmit another byte, do it.
+          if (B_UDRE) _tx_udr_empty_irq();
+
+          // Make sure compiler rereads tx_buffer.tail
+          sw_barrier();
+        }
+      }
+      else {
+        // Interrupts are enabled, just wait until there is space
+        while (i == tx_buffer.tail) sw_barrier();
+      }
+
+      // Store new char. head is always safe to move
+      tx_buffer.buffer[tx_buffer.head] = c;
+      tx_buffer.head = i;
+
+      // Enable TX ISR - Non atomic, but it will eventually enable TX ISR
+      B_UDRIE = 1;
+    }
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::flushTX(void) {
+
+    if (Cfg::TX_SIZE == 0) {
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
+
+      // Wait until everything was transmitted
+      while (!B_TXC) sw_barrier();
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
+
+    }
+    else {
+
+      // No bytes written, no need to flush. This special case is needed since there's
+      // no way to force the TXC (transmit complete) bit to 1 during initialization.
+      if (!_written) return;
+
+      // If global interrupts are disabled (as the result of being called from an ISR)...
+      if (!ISRS_ENABLED()) {
+
+        // Wait until everything was transmitted - We must do polling, as interrupts are disabled
+        while (tx_buffer.head != tx_buffer.tail || !B_TXC) {
+
+          // If there is more space, send an extra character
+          if (B_UDRE) _tx_udr_empty_irq();
+
+          sw_barrier();
+        }
+
+      }
+      else {
+        // Wait until everything was transmitted
+        while (tx_buffer.head != tx_buffer.tail || !B_TXC) sw_barrier();
+      }
+
+      // At this point nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished transmission (TXC is set).
+    }
+  }
+
+  /**
+   * Imports from print.h
+   */
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(char c, int base) {
+    print((long)c, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned char b, int base) {
+    print((unsigned long)b, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(int n, int base) {
+    print((long)n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned int n, int base) {
+    print((unsigned long)n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(long n, int base) {
+    if (base == 0) write(n);
+    else if (base == 10) {
+      if (n < 0) { print('-'); n = -n; }
+      printNumber(n, 10);
+    }
+    else
+      printNumber(n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(unsigned long n, int base) {
+    if (base == 0) write(n);
+    else printNumber(n, base);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::print(double n, int digits) {
+    printFloat(n, digits);
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(void) {
+    print('\r');
+    print('\n');
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(const String& s) {
+    print(s);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(const char c[]) {
+    print(c);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(char c, int base) {
+    print(c, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned char b, int base) {
+    print(b, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(int n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned int n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(unsigned long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::println(double n, int digits) {
+    print(n, digits);
+    println();
+  }
+
+  // Private Methods
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
+    if (n) {
+      unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+      int8_t i = 0;
+      while (n) {
+        buf[i++] = n % base;
+        n /= base;
+      }
+      while (i--)
+        print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+    }
+    else
+      print('0');
+  }
+
+  template<typename Cfg>
+  void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
+    // Handle negative numbers
+    if (number < 0.0) {
+      print('-');
+      number = -number;
+    }
+
+    // Round correctly so that print(1.999, 2) prints as "2.00"
+    double rounding = 0.5;
+    for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
+    number += rounding;
+
+    // Extract the integer part of the number and print it
+    unsigned long int_part = (unsigned long)number;
+    double remainder = number - (double)int_part;
+    print(int_part);
+
+    // Print the decimal point, but only if there are digits beyond
+    if (digits) {
+      print('.');
+      // Extract digits from the remainder one at a time
+      while (digits--) {
+        remainder *= 10.0;
+        int toPrint = int(remainder);
+        print(toPrint);
+        remainder -= toPrint;
+      }
+    }
+  }
+
+  // Hookup ISR handlers
+  ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+  #ifdef SERIAL_PORT_2
+
+    // Hookup ISR handlers
+    ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_RX_vect)) {
+      MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::store_rxd_char();
+    }
+
+    ISR(SERIAL_REGNAME(USART,SERIAL_PORT_2,_UDRE_vect)) {
+      MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>::_tx_udr_empty_irq();
+    }
+
+    // Preinstantiate
+    template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+    // Instantiate
+    MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
+  #endif
+
+#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
+
+#ifdef INTERNAL_SERIAL_PORT
+
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_RX_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::store_rxd_char();
+  }
+
+  ISR(SERIAL_REGNAME(USART,INTERNAL_SERIAL_PORT,_UDRE_vect)) {
+    MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>::_tx_udr_empty_irq();
+  }
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+
+#endif
+
+// For AT90USB targets use the UART for BT interfacing
+#if defined(USBCON) && ENABLED(BLUETOOTH)
+  HardwareSerial bluetoothSerial;
+#endif
+
+#endif // __AVR__

Marlin/src/HAL/HAL_AVR/MarlinSerial.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -31,9 +31,9 @@
  * Templatized 01 October 2018 by Eduardo José Tagle to allow multiple instances
  */
 
-#include <WString.h>
+#include "../shared/MarlinSerial.h"
 
-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -48,11 +48,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
   #else
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -205,23 +205,18 @@
     public:
 
     FORCE_INLINE static void store_rxd_char();
-    FORCE_INLINE static void _tx_udr_empty_irq();
+    FORCE_INLINE static void _tx_udr_empty_irq(void);
 
     public:
       MarlinSerial() {};
       static void begin(const long);
       static void end();
-      static int peek();
-      static int read();
-      static void flush();
-      static ring_buffer_pos_t available();
+      static int peek(void);
+      static int read(void);
+      static void flush(void);
+      static ring_buffer_pos_t available(void);
       static void write(const uint8_t c);
-      static void flushTX();
-      #if HAS_DGUS_LCD
-        static ring_buffer_pos_t get_tx_buffer_free();
-      #endif
-
-      static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+      static void flushTX(void);
 
       FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
       FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
@@ -250,7 +245,7 @@
       static void println(long, int = DEC);
       static void println(unsigned long, int = DEC);
       static void println(double, int = 2);
-      static void println();
+      static void println(void);
       operator bool() { return true; }
 
     private:
@@ -263,12 +258,12 @@
     static constexpr int PORT               = serial;
     static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
     static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-    static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
-    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
-    static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
-    static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-    static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
-    static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+    static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
+    static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
+    static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
+    static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
+    static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
+    static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
   };
   extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
 
@@ -280,50 +275,21 @@
 
 #endif // !USBCON
 
-#ifdef MMU2_SERIAL_PORT
+#ifdef INTERNAL_SERIAL_PORT
   template <uint8_t serial>
-  struct MMU2SerialCfg {
+  struct MarlinInternalSerialCfg {
     static constexpr int PORT               = serial;
+    static constexpr unsigned int RX_SIZE   = 32;
+    static constexpr unsigned int TX_SIZE   = 32;
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_OVERRUNS       = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr unsigned int RX_SIZE   = 32;
-    static constexpr unsigned int TX_SIZE   = 32;
-    static constexpr bool RX_OVERRUNS       = false;
   };
 
-  extern MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>> mmuSerial;
-#endif
-
-#ifdef LCD_SERIAL_PORT
-
-  template <uint8_t serial>
-  struct LCDSerialCfg {
-    static constexpr int PORT                 = serial;
-    static constexpr bool XONOFF              = false;
-    static constexpr bool EMERGENCYPARSER     = ENABLED(EMERGENCY_PARSER);
-    static constexpr bool DROPPED_RX          = false;
-    static constexpr bool RX_FRAMING_ERRORS   = false;
-    static constexpr bool MAX_RX_QUEUED       = false;
-    #if HAS_DGUS_LCD
-      static constexpr unsigned int RX_SIZE   = DGUS_RX_BUFFER_SIZE;
-      static constexpr unsigned int TX_SIZE   = DGUS_TX_BUFFER_SIZE;
-      static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-    #elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
-      static constexpr unsigned int RX_SIZE   = 64;
-      static constexpr unsigned int TX_SIZE   = 128;
-      static constexpr bool RX_OVERRUNS       = false;
-    #else
-      static constexpr unsigned int RX_SIZE   = 64;
-      static constexpr unsigned int TX_SIZE   = 128;
-      static constexpr bool RX_OVERRUNS       = false
-    #endif
-  };
-
-  extern MarlinSerial<LCDSerialCfg<LCD_SERIAL_PORT>> lcdSerial;
-
+  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations

Marlin/src/HAL/HAL_AVR/ServoTimers.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -59,12 +59,10 @@
 // Say which 16 bit timers can be used and in what order
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define _useTimer1
+  #define _useTimer3
   #define _useTimer4
-  #if NUM_SERVOS > SERVOS_PER_TIMER
-    #define _useTimer3
-    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
-      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
-    #endif
+  #if !HAS_MOTOR_CURRENT_PWM
+    #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
   #endif
 #elif defined(__AVR_ATmega32U4__)
   #define _useTimer3

Marlin/src/HAL/HAL_AVR/endstop_interrupts.h

@@ -0,0 +1,258 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Endstop Interrupts
+ *
+ * Without endstop interrupts the endstop pins must be polled continually in
+ * the temperature-ISR via endstops.update(), most of the time finding no change.
+ * With this feature endstops.update() is called only when we know that at
+ * least one endstop has changed state, saving valuable CPU cycles.
+ *
+ * This feature only works when all used endstop pins can generate either an
+ * 'external interrupt' or a 'pin change interrupt'.
+ *
+ * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
+ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
+ */
+
+#include "../../module/endstops.h"
+
+#include <stdint.h>
+
+// One ISR for all EXT-Interrupts
+void endstop_ISR(void) { endstops.update(); }
+
+/**
+ * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
+ *
+ * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
+ * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
+ * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
+ */
+#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
+  #undef  digitalPinToPCICR
+  #define digitalPinToPCICR(p)    ( WITHIN(p, 10, 15) || \
+                                    WITHIN(p, 50, 53) || \
+                                    WITHIN(p, 62, 69) ? &PCICR : nullptr )
+  #undef  digitalPinToPCICRbit
+  #define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
+                                    WITHIN(p, 14, 15) ? 1 : \
+                                    WITHIN(p, 62, 69) ? 2 : \
+                                    0 )
+  #undef  digitalPinToPCMSK
+  #define digitalPinToPCMSK(p)    ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
+                                    WITHIN(p, 14, 15) ? &PCMSK1 : \
+                                    WITHIN(p, 62, 69) ? &PCMSK2 : \
+                                    nullptr )
+  #undef  digitalPinToPCMSKbit
+  #define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
+                                    (p) == 14 || (p) == 51 ? 2 : \
+                                    (p) == 15 || (p) == 52 ? 1 : \
+                                    (p) == 50 ? 3 : \
+                                    (p) == 53 ? 0 : \
+                                    WITHIN(p, 62, 69) ? ((p) - 62) : \
+                                    0 )
+#endif
+
+
+// Install Pin change interrupt for a pin. Can be called multiple times.
+void pciSetup(const int8_t pin) {
+  if (digitalPinToPCMSK(pin) != nullptr) {
+    SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
+    SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
+    SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
+  }
+}
+
+// Handlers for pin change interrupts
+#ifdef PCINT0_vect
+  ISR(PCINT0_vect) { endstop_ISR(); }
+#endif
+
+#ifdef PCINT1_vect
+  ISR(PCINT1_vect, ISR_ALIASOF(PCINT0_vect));
+#endif
+
+#ifdef PCINT2_vect
+  ISR(PCINT2_vect, ISR_ALIASOF(PCINT0_vect));
+#endif
+
+#ifdef PCINT3_vect
+  ISR(PCINT3_vect, ISR_ALIASOF(PCINT0_vect));
+#endif
+
+void setup_endstop_interrupts( void ) {
+
+  #if HAS_X_MAX
+    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
+      attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
+      pciSetup(X_MAX_PIN);                                                            // assign it
+    #endif
+  #endif
+
+  #if HAS_X_MIN
+    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
+      pciSetup(X_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MAX
+    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
+      pciSetup(Y_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MIN
+    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
+      pciSetup(Y_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MAX
+    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
+      pciSetup(Z_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN
+    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
+      pciSetup(Z_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_X2_MAX
+    #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(X2_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
+      pciSetup(X2_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_X2_MIN
+    #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(X2_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
+      pciSetup(X2_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y2_MAX
+    #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y2_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
+      pciSetup(Y2_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y2_MIN
+    #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y2_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
+      pciSetup(Y2_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MAX
+    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
+      pciSetup(Z2_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MIN
+    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
+      pciSetup(Z2_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z3_MAX
+    #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
+      pciSetup(Z3_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z3_MIN
+    #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
+      pciSetup(Z3_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN_PROBE_PIN
+    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
+      pciSetup(Z_MIN_PROBE_PIN);
+    #endif
+  #endif
+
+  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
+}

Marlin/src/HAL/HAL_AVR/fast_pwm.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
+#if ENABLED(FAST_PWM_FAN)
 
 #include "HAL.h"
 
@@ -59,19 +59,19 @@ Timer get_pwm_timer(const pin_t pin) {
       #ifdef TCCR2
         case TIMER2: {
           Timer timer = {
-            /*TCCRnQ*/  { &TCCR2, nullptr, nullptr },
-            /*OCRnQ*/   { (uint16_t*)&OCR2, nullptr, nullptr },
+            /*TCCRnQ*/  { &TCCR2, nullptr, nullptr},
+            /*OCRnQ*/   { (uint16_t*)&OCR2, nullptr, nullptr},
             /*ICRn*/      nullptr,
             /*n, q*/      2, 0
           };
         }
-      #elif defined(TCCR2A)
+      #elif defined TCCR2A
         #if ENABLED(USE_OCR2A_AS_TOP)
           case TIMER2A:   break; // protect TIMER2A
           case TIMER2B: {
             Timer timer = {
-              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr },
-              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
+              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr},
+              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
               /*ICRn*/      nullptr,
               /*n, q*/      2, 1
             };
@@ -81,8 +81,8 @@ Timer get_pwm_timer(const pin_t pin) {
           case TIMER2B:   ++q;
           case TIMER2A: {
             Timer timer = {
-              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr },
-              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
+              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr},
+              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr},
               /*ICRn*/      nullptr,
                             2, q
             };
@@ -91,24 +91,13 @@ Timer get_pwm_timer(const pin_t pin) {
         #endif
       #endif
     #endif
-    #ifdef OCR3C
+    #ifdef TCCR3A
       case TIMER3C:   ++q;
       case TIMER3B:   ++q;
       case TIMER3A: {
         Timer timer = {
-          /*TCCRnQ*/  { &TCCR3A,  &TCCR3B,  &TCCR3C },
-          /*OCRnQ*/   { &OCR3A,   &OCR3B,   &OCR3C },
-          /*ICRn*/      &ICR3,
-          /*n, q*/      3, q
-        };
-        return timer;
-      }
-    #elif defined(OCR3B)
-      case TIMER3B:   ++q;
-      case TIMER3A: {
-        Timer timer = {
-          /*TCCRnQ*/  { &TCCR3A,  &TCCR3B,  nullptr },
-          /*OCRnQ*/   { &OCR3A,   &OCR3B,  nullptr },
+          /*TCCRnQ*/  { &TCCR3A,  &TCCR3B,  &TCCR3C},
+          /*OCRnQ*/   { &OCR3A,   &OCR3B,   &OCR3C},
           /*ICRn*/      &ICR3,
           /*n, q*/      3, q
         };
@@ -120,8 +109,8 @@ Timer get_pwm_timer(const pin_t pin) {
       case TIMER4B:   ++q;
       case TIMER4A: {
         Timer timer = {
-          /*TCCRnQ*/  { &TCCR4A,  &TCCR4B,  &TCCR4C },
-          /*OCRnQ*/   { &OCR4A,   &OCR4B,   &OCR4C },
+          /*TCCRnQ*/  { &TCCR4A,  &TCCR4B,  &TCCR4C},
+          /*OCRnQ*/   { &OCR4A,   &OCR4B,   &OCR4C},
           /*ICRn*/      &ICR4,
           /*n, q*/      4, q
         };
@@ -133,7 +122,7 @@ Timer get_pwm_timer(const pin_t pin) {
       case TIMER5B:   ++q;
       case TIMER5A: {
         Timer timer = {
-          /*TCCRnQ*/  { &TCCR5A,  &TCCR5B,  &TCCR5C },
+          /*TCCRnQ*/  { &TCCR5A,  &TCCR5B,  &TCCR5C},
           /*OCRnQ*/   { &OCR5A,   &OCR5B,   &OCR5C },
           /*ICRn*/      &ICR5,
           /*n, q*/      5, q
@@ -143,8 +132,8 @@ Timer get_pwm_timer(const pin_t pin) {
     #endif
   }
   Timer timer = {
-      /*TCCRnQ*/  { nullptr, nullptr, nullptr },
-      /*OCRnQ*/   { nullptr, nullptr, nullptr },
+      /*TCCRnQ*/  { nullptr, nullptr, nullptr},
+      /*OCRnQ*/   { nullptr, nullptr, nullptr},
       /*ICRn*/      nullptr,
                     0, 0
   };
@@ -167,7 +156,7 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
     uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
 
     // loop over prescaler values
-    LOOP_S_L_N(i, 1, 8) {
+    for (uint8_t i = 1; i < 8; i++) {
       uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
       if (timer.n == 2) {
         // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
@@ -185,8 +174,8 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
         res_temp_phase_correct = rtf / 2;
       }
 
-      LIMIT(res_temp_fast, 1U, size);
-      LIMIT(res_temp_phase_correct, 1U, size);
+      LIMIT(res_temp_fast, 1u, size);
+      LIMIT(res_temp_phase_correct, 1u, size);
       // Calculate frequencies of test prescaler and resolution values
       const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
                 f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
@@ -274,9 +263,9 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
     else
       top = *timer.ICRn; // top = ICRn
 
-    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top) / float(v_size)); // Scale 8/16-bit v to top value
+    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
   }
 }
 
-#endif // NEEDS_HARDWARE_PWM
+#endif // FAST_PWM_FAN
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/fastio/fastio_1280.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,10 +26,10 @@
  *
  *   Hardware Pin  : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
  *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
- *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
+ *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 72 75 76 77 74 xx xx xx xx xx
  */
 
-#include "../fastio.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO21

Marlin/src/HAL/HAL_AVR/fastio/fastio_1281.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,7 +28,7 @@
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
  */
 
-#include "../fastio.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO46

Marlin/src/HAL/HAL_AVR/fastio/fastio_168.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,7 +28,7 @@
  *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
  */
 
-#include "../fastio.h"
+#include "../fastio_AVR.h"
 
 #define DEBUG_LED   AIO5
 

Marlin/src/HAL/HAL_AVR/fastio/fastio_644.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -54,7 +54,7 @@
  *                        +--------+
  */
 
-#include "../fastio.h"
+#include "../fastio_AVR.h"
 
 #define DEBUG_LED   DIO0
 

Marlin/src/HAL/HAL_AVR/fastio/fastio_AT90USB.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,7 +29,7 @@
  *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
  */
 
-#include "../fastio.h"
+#include "../fastio_AVR.h"
 
 // change for your board
 #define DEBUG_LED   DIO31 /* led D5 red */

Marlin/src/HAL/HAL_AVR/fastio_AVR.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -26,7 +26,7 @@
 
 #ifdef __AVR__
 
-#include "fastio.h"
+#include "fastio_AVR.h"
 
 #ifdef FASTIO_EXT_START
 
@@ -234,55 +234,5 @@ uint8_t extDigitalRead(const int8_t pin) {
   }
 }
 
-#if 0
-/**
- * Set Timer 5 PWM frequency in Hz, from 3.8Hz up to ~16MHz
- * with a minimum resolution of 100 steps.
- *
- * DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
- */
-uint16_t set_pwm_frequency_hz(const float &hz, const float dca, const float dcb, const float dcc) {
-  float count = 0;
-  if (hz > 0 && (dca || dcb || dcc)) {
-    count = float(F_CPU) / hz;            // 1x prescaler, TOP for 16MHz base freq.
-    uint16_t prescaler;                   // Range of 30.5Hz (65535) 64.5KHz (>31)
-
-         if (count >= 255. * 256.) { prescaler = 1024; SET_CS(5, PRESCALER_1024); }
-    else if (count >= 255. * 64.)  { prescaler = 256;  SET_CS(5,  PRESCALER_256); }
-    else if (count >= 255. * 8.)   { prescaler = 64;   SET_CS(5,   PRESCALER_64); }
-    else if (count >= 255.)        { prescaler = 8;    SET_CS(5,    PRESCALER_8); }
-    else                           { prescaler = 1;    SET_CS(5,    PRESCALER_1); }
-
-    count /= float(prescaler);
-    const float pwm_top = round(count);   // Get the rounded count
-
-    ICR5 = (uint16_t)pwm_top - 1;         // Subtract 1 for TOP
-    OCR5A = pwm_top * ABS(dca);          // Update and scale DCs
-    OCR5B = pwm_top * ABS(dcb);
-    OCR5C = pwm_top * ABS(dcc);
-    _SET_COM(5, A, dca ? (dca < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL); // Set compare modes
-    _SET_COM(5, B, dcb ? (dcb < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-    _SET_COM(5, C, dcc ? (dcc < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-
-    SET_WGM(5, FAST_PWM_ICRn);            // Fast PWM with ICR5 as TOP
-
-    //SERIAL_ECHOLNPGM("Timer 5 Settings:");
-    //SERIAL_ECHOLNPAIR("  Prescaler=", prescaler);
-    //SERIAL_ECHOLNPAIR("        TOP=", ICR5);
-    //SERIAL_ECHOLNPAIR("      OCR5A=", OCR5A);
-    //SERIAL_ECHOLNPAIR("      OCR5B=", OCR5B);
-    //SERIAL_ECHOLNPAIR("      OCR5C=", OCR5C);
-  }
-  else {
-    // Restore the default for Timer 5
-    SET_WGM(5, PWM_PC_8);                 // PWM 8-bit (Phase Correct)
-    SET_COMS(5, NORMAL, NORMAL, NORMAL);  // Do nothing
-    SET_CS(5, PRESCALER_64);              // 16MHz / 64 = 250KHz
-    OCR5A = OCR5B = OCR5C = 0;
-  }
-  return round(count);
-}
-#endif
-
 #endif // FASTIO_EXT_START
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/fastio_AVR.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,17 +29,11 @@
 
 #include <avr/io.h>
 
-#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
-  #define AVR_AT90USB1286_FAMILY 1
-#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define AVR_ATmega1284_FAMILY 1
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define AVR_ATmega2560_FAMILY 1
-#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_ATmega2561_FAMILY 1
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_ATmega328_FAMILY 1
-#endif
+#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
+#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
+#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
+#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
+#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
 
 /**
  * Include Ports and Functions
@@ -63,7 +57,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
@@ -104,9 +98,9 @@
 
 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
-#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-#define SET_PWM               SET_OUTPUT
+
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
@@ -285,25 +279,14 @@ enum ClockSource2 : char {
  */
 
 // Determine which harware PWMs are already in use
-#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #if PIN_EXISTS(CONTROLLER_FAN)
-  #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
+  #define PWM_CHK_FAN_B(P) (P == CONTROLLER_FAN_PIN || P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #else
-  #define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P)
+  #define PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #endif
 
-#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7)
-  #if PIN_EXISTS(FAN7)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN)
-  #elif PIN_EXISTS(FAN6)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN)
-  #elif PIN_EXISTS(FAN5)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN)
-  #elif PIN_EXISTS(FAN4)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN)
-  #elif PIN_EXISTS(FAN3)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN)
-  #elif PIN_EXISTS(FAN2)
+#if ANY_PIN(FAN, FAN1, FAN2)
+  #if PIN_EXISTS(FAN2)
     #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
   #elif PIN_EXISTS(FAN1)
     #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)

Marlin/src/HAL/HAL_AVR/inc/Conditionals_LCD.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_adv.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/Conditionals_post.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/inc/SanityCheck.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,34 +25,37 @@
  * Test AVR-specific configuration values for errors at compile-time.
  */
 
+/**
+ * Digipot requirement
+ */
+ #if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
+#endif
+
 /**
  * Checks for FAST PWM
  */
 #if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
-  #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
+    #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
 #endif
 
 /**
  * Sanity checks for Spindle / Laser PWM
  */
 #if ENABLED(SPINDLE_LASER_PWM)
-  #include "../ServoTimers.h"   // Needed to check timer availability (_useTimer3)
   #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-  #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+  #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
   #endif
-#elif defined(SPINDLE_LASER_FREQUENCY)
-  #error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_PWM."
 #endif
 
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
-
-#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
-  #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
-#endif

Marlin/src/HAL/HAL_AVR/math_AVR.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/persistent_store_eeprom.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
@@ -25,18 +25,9 @@
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with implementations supplied by the framework.
- */
+#include "../shared/persistent_store_api.h"
 
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
@@ -48,18 +39,18 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
         return true;
       }
     }
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;
@@ -70,5 +61,7 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
   return false;  // always assume success for AVR's
 }
 
+size_t PersistentStore::capacity() { return E2END + 1; }
+
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__

Marlin/src/HAL/HAL_AVR/pinsDebug.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,12 +26,7 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
-  #define AVR_ATmega2560_FAMILY_PLUS_70 1
-#endif
-
 #if AVR_AT90USB1286_FAMILY
-
   // Working with Teensyduino extension so need to re-define some things
   #include "pinsDebug_Teensyduino.h"
   // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
@@ -40,9 +35,7 @@
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
   #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
   #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
-
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
-
   #include "pinsDebug_plus_70.h"
   #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
@@ -50,13 +43,11 @@
   bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
 
 #else
-
   #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
   #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
   bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
   #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
-
 #endif
 
 #define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
@@ -72,12 +63,12 @@
 
 void PRINT_ARRAY_NAME(uint8_t x) {
   char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
-  LOOP_L_N(y, MAX_NAME_LENGTH) {
+  for (uint8_t y = 0; y < MAX_NAME_LENGTH; y++) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
       SERIAL_CHAR(temp_char);
     else {
-      LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
+      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; i++) SERIAL_CHAR(' ');
       break;
     }
   }
@@ -233,11 +224,21 @@ static void err_is_interrupt()   { SERIAL_ECHOPGM("   compare interrupt enabled"
 static void err_prob_interrupt() { SERIAL_ECHOPGM("   overflow interrupt enabled"); }
 static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }
 
-inline void com_print(const uint8_t N, const uint8_t Z) {
+void com_print(uint8_t N, uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
   SERIAL_ECHOPGM("    COM");
-  SERIAL_CHAR('0' + N, Z);
-  SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
+  SERIAL_CHAR(N + '0');
+  switch (Z) {
+    case 'A':
+      SERIAL_ECHOPAIR("A: ", ((*TCCRA & (_BV(7) | _BV(6))) >> 6));
+      break;
+    case 'B':
+      SERIAL_ECHOPAIR("B: ", ((*TCCRA & (_BV(5) | _BV(4))) >> 4));
+      break;
+    case 'C':
+      SERIAL_ECHOPAIR("C: ", ((*TCCRA & (_BV(3) | _BV(2))) >> 2));
+      break;
+  }
 }
 
 void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N - WGM bit layout
@@ -248,7 +249,8 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
 
   SERIAL_ECHOPGM("    TIMER");
-  SERIAL_CHAR(T + '0', L);
+  SERIAL_CHAR(T + '0');
+  SERIAL_CHAR(L);
   SERIAL_ECHO_SP(3);
 
   if (N == 3) {

Marlin/src/HAL/HAL_AVR/pinsDebug_Teensyduino.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_AVR/pinsDebug_plus_70.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -22,12 +22,15 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
-  #undef NUM_DIGITAL_PINS
+#undef NUM_DIGITAL_PINS
+#if MB(BQ_ZUM_MEGA_3D)
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
-  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
+#elif MB(MINIRAMBO)
+  #define NUM_DIGITAL_PINS            85
+#elif MB(SCOOVO_X9H)
+  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/HAL_AVR/servo_AVR.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -48,6 +48,7 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
+ *
  */
 
 #ifdef __AVR__
@@ -58,6 +59,7 @@
 
 #include <avr/interrupt.h>
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 
@@ -129,7 +131,7 @@ void initISR(timer16_Sequence_t timer) {
       TCCR1A = 0;             // normal counting mode
       TCCR1B = _BV(CS11);     // set prescaler of 8
       TCNT1 = 0;              // clear the timer count
-      #if defined(__AVR_ATmega8__) || defined(__AVR_ATmega128__)
+      #if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
         SBI(TIFR, OCF1A);      // clear any pending interrupts;
         SBI(TIMSK, OCIE1A);    // enable the output compare interrupt
       #else

Marlin/src/HAL/HAL_AVR/spi_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -51,15 +51,15 @@
   #define AVR_SS_PIN   16
 #endif
 
-#ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  AVR_SCK_PIN
+#ifndef SCK_PIN
+  #define SCK_PIN  AVR_SCK_PIN
 #endif
-#ifndef SD_MISO_PIN
-  #define SD_MISO_PIN AVR_MISO_PIN
+#ifndef MISO_PIN
+  #define MISO_PIN AVR_MISO_PIN
 #endif
-#ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN AVR_MOSI_PIN
+#ifndef MOSI_PIN
+  #define MOSI_PIN AVR_MOSI_PIN
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN   AVR_SS_PIN
+#ifndef SS_PIN
+  #define SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/HAL_AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
@@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     if (val & 0x80)
       *outData |= bitData;
     else
@@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     *outClock &= bitNotClock;
     if (val & 0x80)
       *outData |= bitData;
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_AVR/watchdog_AVR.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,18 +16,19 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(USE_WATCHDOG)
 
-#include "watchdog.h"
+#include "watchdog_AVR.h"
 
-#include "../../MarlinCore.h"
+#include "../../Marlin.h"
 
 // Initialize watchdog with 8s timeout, if possible. Otherwise, make it 4s.
 void watchdog_init() {
@@ -61,7 +62,7 @@ void watchdog_init() {
 #if ENABLED(WATCHDOG_RESET_MANUAL)
   ISR(WDT_vect) {
     sei();  // With the interrupt driven serial we need to allow interrupts.
-    SERIAL_ERROR_MSG(STR_WATCHDOG_FIRED);
+    SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
     minkill();  // interrupt-safe final kill and infinite loop
   }
 #endif

Marlin/src/HAL/HAL_AVR/watchdog_AVR.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,4 +28,4 @@ void watchdog_init();
 
 // Reset watchdog. MUST be called at least every 4 seconds after the
 // first watchdog_init or AVR will go into emergency procedures.
-inline void HAL_watchdog_refresh() { wdt_reset(); }
+inline void watchdog_reset() { wdt_reset(); }

Marlin/src/HAL/HAL_DUE/DebugMonitor_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../core/macros.h"
@@ -41,7 +42,7 @@
 #define sw_barrier() __asm__ volatile("": : :"memory");
 
 // (re)initialize UART0 as a monitor output to 250000,n,8,1
-static void TXBegin() {
+static void TXBegin(void) {
 
   // Disable UART interrupt in NVIC
   NVIC_DisableIRQ( UART_IRQn );
@@ -234,7 +235,7 @@ void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause
   for (;;) WDT_Restart(WDT);
 }
 
-__attribute__((naked)) void NMI_Handler() {
+__attribute__((naked)) void NMI_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -247,7 +248,7 @@ __attribute__((naked)) void NMI_Handler() {
   );
 }
 
-__attribute__((naked)) void HardFault_Handler() {
+__attribute__((naked)) void HardFault_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -260,7 +261,7 @@ __attribute__((naked)) void HardFault_Handler() {
   );
 }
 
-__attribute__((naked)) void MemManage_Handler() {
+__attribute__((naked)) void MemManage_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -273,7 +274,7 @@ __attribute__((naked)) void MemManage_Handler() {
   );
 }
 
-__attribute__((naked)) void BusFault_Handler() {
+__attribute__((naked)) void BusFault_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -286,7 +287,7 @@ __attribute__((naked)) void BusFault_Handler() {
   );
 }
 
-__attribute__((naked)) void UsageFault_Handler() {
+__attribute__((naked)) void UsageFault_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -299,7 +300,7 @@ __attribute__((naked)) void UsageFault_Handler() {
   );
 }
 
-__attribute__((naked)) void DebugMon_Handler() {
+__attribute__((naked)) void DebugMon_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -313,7 +314,7 @@ __attribute__((naked)) void DebugMon_Handler() {
 }
 
 /* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
-__attribute__((naked)) void WDT_Handler() {
+__attribute__((naked)) void WDT_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")
@@ -326,7 +327,7 @@ __attribute__((naked)) void WDT_Handler() {
   );
 }
 
-__attribute__((naked)) void RSTC_Handler() {
+__attribute__((naked)) void RSTC_Handler(void) {
   __asm__ __volatile__ (
     ".syntax unified" "\n\t"
     A("tst lr, #4")

Marlin/src/HAL/HAL_DUE/EepromEmulation_Due.cpp

@@ -1,30 +1,3 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(FLASH_EEPROM_EMULATION)
 
 /* EEPROM emulation over flash with reduced wear
  *
@@ -53,14 +26,22 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
+ *
  */
 
-//#define EE_EMU_DEBUG
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS) && NONE(I2C_EEPROM, SPI_EEPROM)
+
+#include "../shared/Marduino.h"
+#include "../shared/persistent_store_api.h"
 
 #define EEPROMSize     4096
 #define PagesPerGroup   128
 #define GroupCount        2
-#define PageSize        256U
+#define PageSize        256u
 
  /* Flash storage */
 typedef struct FLASH_SECTOR {
@@ -132,18 +113,15 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curPage = 0,         // Current FLASH page inside the group
                curGroup = 0xFF;     // Current FLASH group
 
-#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
-#include "../../core/debug_out.h"
-
-static void ee_Dump(const int page, const void* data) {
-
-  #ifdef EE_EMU_DEBUG
+//#define EE_EMU_DEBUG
+#ifdef EE_EMU_DEBUG
+  static void ee_Dump(int page,const void* data) {
 
     const uint8_t* c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
-    DEBUG_ECHO(buffer);
+    SERIAL_ECHO(buffer);
 
     char* p = &buffer[0];
     for (int i = 0; i< PageSize; ++i) {
@@ -153,16 +131,12 @@ static void ee_Dump(const int page, const void* data) {
       if ((i & 0xF) == 0xF) {
         *p++ = '\n';
         *p = 0;
-        DEBUG_ECHO(buffer);
+        SERIAL_ECHO(buffer);
         p = &buffer[0];
       }
     }
-
-  #else
-    UNUSED(page);
-    UNUSED(data);
-  #endif
-}
+  }
+#endif
 
 /* Flash Writing Protection Key */
 #define FWP_KEY    0x5Au
@@ -175,16 +149,17 @@ static void ee_Dump(const int page, const void* data) {
   #define EEFC_ERROR_FLAGS  (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
 #endif
 
+
 /**
  * Writes the contents of the specified page (no previous erase)
  * @param page    (page #)
  * @param data    (pointer to the data buffer)
  */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page, const void* data) {
+static bool ee_PageWrite(uint16_t page,const void* data) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
   // Read the flash contents
   uint32_t pageContents[PageSize>>2];
@@ -199,11 +174,13 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   for (i = 0; i <PageSize >> 2; i++)
     pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM PageWrite   ", page);
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageWrite   ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -245,8 +222,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #endif
     return false;
   }
 
@@ -270,9 +249,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
+    #endif
     return false;
   }
 
@@ -286,11 +266,11 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   if (memcmp(getFlashStorage(page),data,PageSize)) {
 
     #ifdef EE_EMU_DEBUG
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
 
-      ee_Dump( page, (uint32_t *)addrflash);
-      ee_Dump(-page, data);
+      ee_Dump( page,(uint32_t *) addrflash);
+      ee_Dump(-page,data);
 
       // Calculate count of changed bits
       uint32_t* p1 = (uint32_t*)addrflash;
@@ -306,7 +286,7 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
           }
         }
       }
-      DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
+      SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
     #endif
 
     return false;
@@ -323,13 +303,15 @@ __attribute__ ((long_call, section (".ramfunc")))
 static bool ee_PageErase(uint16_t page) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM PageErase  ", page);
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageErase  ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -370,9 +352,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+    #endif
     return false;
   }
 
@@ -394,9 +377,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+    #endif
     return false;
   }
 
@@ -410,17 +394,20 @@ static bool ee_PageErase(uint16_t page) {
   uint32_t * aligned_src = (uint32_t *) addrflash;
   for (i = 0; i < PageSize >> 2; i++) {
     if (*aligned_src++ != 0xFFFFFFFF) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
-      ee_Dump(page, (uint32_t *)addrflash);
+
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+
+        ee_Dump( page,(uint32_t *) addrflash);
+      #endif
       return false;
     }
   }
 
   return true;
 }
-
-static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
+static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
 
   uint32_t baddr;
   uint32_t blen;
@@ -503,7 +490,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   return 0xFF;
 }
 
-static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
+static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
   uint32_t baddr,
            blen,
            nextAddr = 0xFFFF,
@@ -595,7 +582,7 @@ static bool ee_IsPageClean(int page) {
   return true;
 }
 
-static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {
+static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
@@ -921,9 +908,11 @@ static void ee_Init() {
   // If all groups seem to be used, default to first group
   if (curGroup >= GroupCount) curGroup = 0;
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+    SERIAL_FLUSH();
+  #endif
 
   // Now, validate that all the other group pages are empty
   for (int grp = 0; grp < GroupCount; grp++) {
@@ -931,9 +920,12 @@ static void ee_Init() {
 
     for (int page = 0; page < PagesPerGroup; page++) {
       if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
-        DEBUG_ECHO_START();
-        DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
-        DEBUG_FLUSH();
+        #ifdef EE_EMU_DEBUG
+          SERIAL_ECHO_START();
+          SERIAL_ECHOPAIR("EEPROM Page ",page);
+          SERIAL_ECHOLNPAIR(" not clean on group ",grp);
+          SERIAL_FLUSH();
+        #endif
         ee_PageErase(grp * PagesPerGroup + page);
       }
     }
@@ -943,69 +935,67 @@ static void ee_Init() {
   // and also validate that all the other ones are clean
   for (curPage = 0; curPage < PagesPerGroup; curPage++) {
     if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
-      ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #ifdef EE_EMU_DEBUG
+        ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #endif
       break;
     }
   }
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Active page: ",curPage);
+    SERIAL_FLUSH();
+  #endif
 
   // Make sure the pages following the first clean one are also clean
   for (int page = curPage + 1; page < PagesPerGroup; page++) {
     if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
-      DEBUG_FLUSH();
-      ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOPAIR("EEPROM Page ",page);
+        SERIAL_ECHOLNPAIR(" not clean on active group ",curGroup);
+        SERIAL_FLUSH();
+        ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #endif
       ee_PageErase(curGroup * PagesPerGroup + page);
     }
   }
 }
 
-/* PersistentStore -----------------------------------------------------------*/
+uint8_t eeprom_read_byte(uint8_t* addr) {
+  ee_Init();
+  return ee_Read((uint32_t)addr);
+}
 
-#include "../shared/eeprom_api.h"
+void eeprom_write_byte(uint8_t* addr, uint8_t value) {
+  ee_Init();
+  ee_Write((uint32_t)addr, value);
+}
 
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { ee_Init();  return true; }
-bool PersistentStore::access_finish() { ee_Flush(); return true; }
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != ee_Read(uint32_t(p))) {
-      ee_Write(uint32_t(p), v);
-      delay(2);
-      if (ee_Read(uint32_t(p)) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
+void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  const uint8_t* src = (const uint8_t*)__src;
+  while (__n--) {
+    eeprom_write_byte(dst, *src);
+    ++dst;
+    ++src;
   }
-  return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    uint8_t c = ee_Read(uint32_t(pos));
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-  return false;
+void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  uint8_t* src = (uint8_t*)__src;
+  while (__n--) {
+    *dst = eeprom_read_byte(src);
+    ++dst;
+    ++src;
+  }
 }
 
-#endif // FLASH_EEPROM_EMULATION
-#endif // ARDUINO_ARCH_SAM
+void eeprom_flush(void) {
+  ee_Flush();
+}
+
+#endif // EEPROM_SETTINGS && (!I2C_EEPROM && !SPI_EEPROM)
+#endif // ARDUINO_ARCH_AVR

Marlin/src/HAL/HAL_DUE/HAL.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -14,12 +14,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -41,7 +42,7 @@ uint16_t HAL_adc_result;
 // ------------------------
 
 // HAL initialization task
-void HAL_init() {
+void HAL_init(void) {
   // Initialize the USB stack
   #if ENABLED(SDSUPPORT)
     OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
@@ -50,20 +51,20 @@ void HAL_init() {
 }
 
 // HAL idle task
-void HAL_idletask() {
+void HAL_idletask(void) {
   // Perform USB stack housekeeping
   usb_task_idle();
 }
 
 // Disable interrupts
-void cli() { noInterrupts(); }
+void cli(void) { noInterrupts(); }
 
 // Enable interrupts
-void sei() { interrupts(); }
+void sei(void) { interrupts(); }
 
-void HAL_clear_reset_source() { }
+void HAL_clear_reset_source(void) { }
 
-uint8_t HAL_get_reset_source() {
+uint8_t HAL_get_reset_source(void) {
   switch ((RSTC->RSTC_SR >> 8) & 0x07) {
     case 0: return RST_POWER_ON;
     case 1: return RST_BACKUP;
@@ -86,18 +87,18 @@ extern "C" {
 // Return free memory between end of heap (or end bss) and whatever is current
 int freeMemory() {
   int free_memory, heap_end = (int)_sbrk(0);
-  return (int)&free_memory - (heap_end ?: (int)&_ebss);
+  return (int)&free_memory - (heap_end ? heap_end : (int)&_ebss);
 }
 
 // ------------------------
 // ADC
 // ------------------------
 
-void HAL_adc_start_conversion(const uint8_t ch) {
-  HAL_adc_result = analogRead(ch);
+void HAL_adc_start_conversion(const uint8_t adc_pin) {
+  HAL_adc_result = analogRead(adc_pin);
 }
 
-uint16_t HAL_adc_get_result() {
+uint16_t HAL_adc_get_result(void) {
   // nop
   return HAL_adc_result;
 }

Marlin/src/HAL/HAL_DUE/HAL.h

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  *
@@ -16,61 +16,50 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
-#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
-#include "fastio.h"
-#include "watchdog.h"
+#include "fastio_Due.h"
+#include "watchdog_Due.h"
+#include "HAL_timers_Due.h"
 
 #include <stdint.h>
 
-#define _MSERIAL(X) Serial##X
-#define MSERIAL(X) _MSERIAL(X)
-#define Serial0 Serial
-
-// Define MYSERIAL0/1 before MarlinSerial includes!
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL0 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL0 MSERIAL(SERIAL_PORT)
-#else
-  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
+// Serial ports
+#if !WITHIN(SERIAL_PORT, -1, 3)
+  #error "SERIAL_PORT must be from -1 to 3"
 #endif
 
+// MYSERIAL0 required before MarlinSerial includes!
+#define MYSERIAL0 customizedSerial1
+
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL1 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+  #if !WITHIN(SERIAL_PORT_2, -1, 3)
+    #error "SERIAL_PORT_2 must be from -1 to 3"
+  #elif SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different than SERIAL_PORT"
   #endif
+  #define NUM_SERIAL 2
+  #define MYSERIAL1 customizedSerial2
+#else
+  #define NUM_SERIAL 1
 #endif
 
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL lcdSerial
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #endif
-#endif
-
-#include "MarlinSerial.h"
-#include "MarlinSerialUSB.h"
+#include "MarlinSerial_Due.h"
+#include "MarlinSerialUSB_Due.h"
 
 // On AVR this is in math.h?
 #define square(x) ((x)*(x))
@@ -93,19 +82,36 @@ typedef int8_t pin_t;
 //
 // Interrupts
 //
-#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define CRITICAL_SECTION_START  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END    if (!primask) __enable_irq()
 #define ISRS_ENABLED() (!__get_PRIMASK())
 #define ENABLE_ISRS()  __enable_irq()
 #define DISABLE_ISRS() __disable_irq()
 
-void cli();                     // Disable interrupts
-void sei();                     // Enable interrupts
+void cli(void);                     // Disable interrupts
+void sei(void);                     // Enable interrupts
 
-void HAL_clear_reset_source();  // clear reset reason
-uint8_t HAL_get_reset_source(); // get reset reason
+void HAL_clear_reset_source(void);  // clear reset reason
+uint8_t HAL_get_reset_source(void); // get reset reason
 
-inline void HAL_reboot() {}  // reboot the board or restart the bootloader
+//
+// SPI: Extended functions taking a channel number (Hardware SPI only)
+//
+
+// Write single byte to specified SPI channel
+void spiSend(uint32_t chan, byte b);
+// Write buffer to specified SPI channel
+void spiSend(uint32_t chan, const uint8_t* buf, size_t n);
+// Read single byte from specified SPI channel
+uint8_t spiRec(uint32_t chan);
+
+//
+// EEPROM
+//
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
 
 //
 // ADC
@@ -113,21 +119,19 @@ inline void HAL_reboot() {}  // reboot the board or restart the bootloader
 extern uint16_t HAL_adc_result;     // result of last ADC conversion
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
 #endif
 
-#define HAL_ANALOG_SELECT(ch)
+#define HAL_ANALOG_SELECT(pin)
 
-inline void HAL_adc_init() {}//todo
+inline void HAL_adc_init(void) {}//todo
 
-#define HAL_ADC_VREF         3.3
-#define HAL_ADC_RESOLUTION  10
-#define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
+#define HAL_START_ADC(pin)  HAL_adc_start_conversion(pin)
 #define HAL_READ_ADC()      HAL_adc_result
 #define HAL_ADC_READY()     true
 
-void HAL_adc_start_conversion(const uint8_t ch);
-uint16_t HAL_adc_get_result();
+void HAL_adc_start_conversion(const uint8_t adc_pin);
+uint16_t HAL_adc_get_result(void);
 
 //
 // Pin Map
@@ -145,24 +149,18 @@ void noTone(const pin_t _pin);
 
 // Enable hooks into idle and setup for HAL
 #define HAL_IDLETASK 1
-void HAL_idletask();
-void HAL_init();
+void HAL_idletask(void);
+void HAL_init(void);
 
 //
 // Utility functions
 //
 void _delay_ms(const int delay);
 
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic push
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-int freeMemory();
-
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic pop
-#endif
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+int freeMemory(void);
+#pragma GCC diagnostic pop
 
 #ifdef __cplusplus
   extern "C" {

Marlin/src/HAL/HAL_DUE/HAL_spi_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -30,7 +30,7 @@
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
  *
  * For ARDUINO_ARCH_SAM
  */
@@ -69,10 +69,10 @@
 
   // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
   static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
     uint32_t idx = 0;
 
     /* Negate bout, as the assembler requires a negated value */
@@ -151,12 +151,13 @@
     (((uint32_t)(addr) & 0xF0000000) + 0x02000000 + ((uint32_t)(addr)&0xFFFFF)*32 + (bit)*4)
 
   // run at ~8 .. ~10Mhz - Rx version (Tx line not altered)
-  static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
+  static uint8_t spiTransferRx0(uint8_t bout) { // using Mode 0
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    UNUSED(bout);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -225,35 +226,35 @@
   static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(SD_MOSI_PIN, b & 0x80);
+      WRITE(MOSI_PIN, b & 0x80);
       b <<= 1;        // little setup time
 
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
       DELAY_NS(125);  // 10 cycles @ 84mhz
 
-      b |= (READ(SD_MISO_PIN) != 0);
+      b |= (READ(MISO_PIN) != 0);
 
-      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SCK_PIN, LOW);
       DELAY_NS(125);  // 10 cycles @ 84mhz
     } while (--bits);
     return b;
   }
 
   // all the others
-  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz
+  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4uS => 125khz
 
   static uint8_t spiTransferX(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(SD_MOSI_PIN, b & 0x80);
+      WRITE(MOSI_PIN, b & 0x80);
       b <<= 1; // little setup time
 
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
       __delay_4cycles(spiDelayCyclesX4);
 
-      b |= (READ(SD_MISO_PIN) != 0);
+      b |= (READ(MISO_PIN) != 0);
 
-      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SCK_PIN, LOW);
       __delay_4cycles(spiDelayCyclesX4);
     } while (--bits);
     return b;
@@ -271,10 +272,10 @@
 
   // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
   static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
     uint32_t work = 0;
     uint32_t txval = 0;
 
@@ -352,9 +353,9 @@
   static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -427,7 +428,7 @@
 
   static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
     do {
-      (void)spiTransferTx(*buf++);
+      (void) spiTransferTx(*buf++);
     } while (--todo);
   }
 
@@ -442,22 +443,22 @@
   static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
 
   #if MB(ALLIGATOR)
-    #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
+    #define _SS_WRITE(S) WRITE(SS_PIN, S)
   #else
     #define _SS_WRITE(S) NOOP
   #endif
 
   void spiBegin() {
-    SET_OUTPUT(SD_SS_PIN);
+    SET_OUTPUT(SS_PIN);
     _SS_WRITE(HIGH);
-    SET_OUTPUT(SD_SCK_PIN);
-    SET_INPUT(SD_MISO_PIN);
-    SET_OUTPUT(SD_MOSI_PIN);
+    SET_OUTPUT(SCK_PIN);
+    SET_INPUT(MISO_PIN);
+    SET_OUTPUT(MOSI_PIN);
   }
 
   uint8_t spiRec() {
     _SS_WRITE(LOW);
-    WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
+    WRITE(MOSI_PIN, HIGH); // Output 1s 1
     uint8_t b = spiTransferRx(0xFF);
     _SS_WRITE(HIGH);
     return b;
@@ -466,7 +467,7 @@
   void spiRead(uint8_t* buf, uint16_t nbyte) {
     if (nbyte) {
       _SS_WRITE(LOW);
-      WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
+      WRITE(MOSI_PIN, HIGH); // Output 1s 1
       spiRxBlock(buf, nbyte);
       _SS_WRITE(HIGH);
     }
@@ -519,8 +520,8 @@
     }
 
     _SS_WRITE(HIGH);
-    WRITE(SD_MOSI_PIN, HIGH);
-    WRITE(SD_SCK_PIN, LOW);
+    WRITE(MOSI_PIN, HIGH);
+    WRITE(SCK_PIN, LOW);
   }
 
   /** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,27 +576,27 @@
 
       // Configure SPI pins
       PIO_Configure(
-         g_APinDescription[SD_SCK_PIN].pPort,
-         g_APinDescription[SD_SCK_PIN].ulPinType,
-         g_APinDescription[SD_SCK_PIN].ulPin,
-         g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
+         g_APinDescription[SCK_PIN].pPort,
+         g_APinDescription[SCK_PIN].ulPinType,
+         g_APinDescription[SCK_PIN].ulPin,
+         g_APinDescription[SCK_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[SD_MOSI_PIN].pPort,
-         g_APinDescription[SD_MOSI_PIN].ulPinType,
-         g_APinDescription[SD_MOSI_PIN].ulPin,
-         g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
+         g_APinDescription[MOSI_PIN].pPort,
+         g_APinDescription[MOSI_PIN].ulPinType,
+         g_APinDescription[MOSI_PIN].ulPin,
+         g_APinDescription[MOSI_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[SD_MISO_PIN].pPort,
-         g_APinDescription[SD_MISO_PIN].ulPinType,
-         g_APinDescription[SD_MISO_PIN].ulPin,
-         g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
+         g_APinDescription[MISO_PIN].pPort,
+         g_APinDescription[MISO_PIN].ulPinType,
+         g_APinDescription[MISO_PIN].ulPin,
+         g_APinDescription[MISO_PIN].ulPinConfiguration);
 
       // set master mode, peripheral select, fault detection
       SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
       SPI_Enable(SPI0);
 
       SET_OUTPUT(DAC0_SYNC);
-      #if HAS_MULTI_EXTRUDER
+      #if EXTRUDERS > 1
         SET_OUTPUT(DAC1_SYNC);
         WRITE(DAC1_SYNC, HIGH);
       #endif
@@ -606,7 +607,7 @@
       WRITE(SPI_EEPROM1_CS, HIGH);
       WRITE(SPI_EEPROM2_CS, HIGH);
       WRITE(SPI_FLASH_CS, HIGH);
-      WRITE(SD_SS_PIN, HIGH);
+      WRITE(SS_PIN, HIGH);
 
       OUT_WRITE(SDSS, LOW);
 
@@ -759,6 +760,7 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
+     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)

Marlin/src/HAL/HAL_DUE/HAL_timers_Due.cpp

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  *
@@ -16,12 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -32,6 +34,8 @@
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
+#include "HAL_timers_Due.h"
+
 // ------------------------
 // Local defines
 // ------------------------
@@ -46,7 +50,7 @@ const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
   { TC0, 0, TC0_IRQn,  3}, // 0 - [servo timer5]
   { TC0, 1, TC1_IRQn,  0}, // 1
   { TC0, 2, TC2_IRQn,  2}, // 2 - stepper
-  { TC1, 0, TC3_IRQn,  0}, // 3 - stepper for BOARD_ARCHIM1
+  { TC1, 0, TC3_IRQn,  0}, // 3
   { TC1, 1, TC4_IRQn, 15}, // 4 - temperature
   { TC1, 2, TC5_IRQn,  3}, // 5 - [servo timer3]
   { TC2, 0, TC6_IRQn, 14}, // 6 - tone

Marlin/src/HAL/HAL_DUE/HAL_timers_Due.h

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  *
  * This program is free software: you can redistribute it and/or modify
@@ -15,13 +15,15 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #include <stdint.h>
@@ -37,18 +39,10 @@ typedef uint32_t hal_timer_t;
 
 #define HAL_TIMER_RATE         ((F_CPU) / 2)    // frequency of timers peripherals
 
-#ifndef STEP_TIMER_NUM
-  #define STEP_TIMER_NUM        2  // Timer Index for Stepper
-#endif
-#ifndef PULSE_TIMER_NUM
-  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
-#endif
-#ifndef TEMP_TIMER_NUM
-  #define TEMP_TIMER_NUM        4  // Timer Index for Temperature
-#endif
-#ifndef TONE_TIMER_NUM
-  #define TONE_TIMER_NUM        6  // index of timer to use for beeper tones
-#endif
+#define STEP_TIMER_NUM 2  // index of timer to use for stepper
+#define TEMP_TIMER_NUM 4  // index of timer to use for temperature
+#define PULSE_TIMER_NUM STEP_TIMER_NUM
+#define TONE_TIMER_NUM 6  // index of timer to use for beeper tones
 
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
 
@@ -67,15 +61,9 @@ typedef uint32_t hal_timer_t;
 #define ENABLE_TEMPERATURE_INTERRUPT()  HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
 #define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
 
-#ifndef HAL_STEP_TIMER_ISR
-  #define HAL_STEP_TIMER_ISR() void TC2_Handler()
-#endif
-#ifndef HAL_TEMP_TIMER_ISR
-  #define HAL_TEMP_TIMER_ISR() void TC4_Handler()
-#endif
-#ifndef HAL_TONE_TIMER_ISR
-  #define HAL_TONE_TIMER_ISR() void TC6_Handler()
-#endif
+#define HAL_STEP_TIMER_ISR()  void TC2_Handler()
+#define HAL_TEMP_TIMER_ISR()  void TC4_Handler()
+#define HAL_TONE_TIMER_ISR()  void TC6_Handler()
 
 // ------------------------
 // Types

Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -34,7 +34,7 @@
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
-#include "InterruptVectors.h"
+#include "InterruptVectors_Due.h"
 
 /* The relocated Exception/Interrupt Table - According to the ARM
    reference manual, alignment to 128 bytes should suffice, but in
@@ -48,7 +48,7 @@ static DeviceVectors ram_tab = { nullptr };
  * If it is not, then it copies the ROM table to the SRAM and relocates the table
  * by reprogramming the NVIC registers
  */
-static pfnISR_Handler* get_relocated_table_addr() {
+static pfnISR_Handler* get_relocated_table_addr(void) {
   // Get the address of the interrupt/exception table
   uint32_t isrtab = SCB->VTOR;
 
@@ -63,13 +63,13 @@ static pfnISR_Handler* get_relocated_table_addr() {
   memcpy(&ram_tab, romtab, sizeof(ram_tab));
 
   // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;
 
   // Set the vector table base address to the SRAM copy
   SCB->VTOR = (uint32_t)(&ram_tab);
 
   // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;
 
   // Return the address of the table
   return (pfnISR_Handler*)(&ram_tab);
@@ -80,7 +80,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
   pfnISR_Handler *isrtab = get_relocated_table_addr();
 
   // Disable global interrupts
-  CRITICAL_SECTION_START();
+  CRITICAL_SECTION_START;
 
   // Get the original handler
   pfnISR_Handler oldHandler = isrtab[irq + 16];
@@ -89,7 +89,7 @@ pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler) {
   isrtab[irq + 16] = newHandler;
 
   // Reenable interrupts
-  CRITICAL_SECTION_END();
+  CRITICAL_SECTION_END;
 
   // Return the original one
   return oldHandler;

Marlin/src/HAL/HAL_DUE/InterruptVectors_Due.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -37,7 +37,7 @@
 #ifdef ARDUINO_ARCH_SAM
 
 // ISR handler type
-typedef void (*pfnISR_Handler)();
+typedef void (*pfnISR_Handler)(void);
 
 // Install a new interrupt vector handler for the given irq, returning the old one
 pfnISR_Handler install_isr(IRQn_Type irq, pfnISR_Handler newHandler);

Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -29,21 +29,21 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
-#include "MarlinSerialUSB.h"
+#include "MarlinSerialUSB_Due.h"
 
 #if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
+  #include "../../feature/emergency_parser.h"
 #endif
 
 // Imports from Atmel USB Stack/CDC implementation
 extern "C" {
-  bool usb_task_cdc_isenabled();
-  bool usb_task_cdc_dtr_active();
-  bool udi_cdc_is_rx_ready();
-  int udi_cdc_getc();
-  bool udi_cdc_is_tx_ready();
+  bool usb_task_cdc_isenabled(void);
+  bool usb_task_cdc_dtr_active(void);
+  bool udi_cdc_is_rx_ready(void);
+  int udi_cdc_getc(void);
+  bool udi_cdc_is_tx_ready(void);
   int udi_cdc_putc(int value);
 };
 
@@ -55,11 +55,14 @@ static int pending_char = -1;
 #endif
 
 // Public Methods
-void MarlinSerialUSB::begin(const long) {}
+void MarlinSerialUSB::begin(const long baud_setting) {
+  UNUSED(baud_setting);
+}
 
-void MarlinSerialUSB::end() {}
+void MarlinSerialUSB::end() {
+}
 
-int MarlinSerialUSB::peek() {
+int MarlinSerialUSB::peek(void) {
   if (pending_char >= 0)
     return pending_char;
 
@@ -73,12 +76,14 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)pending_char));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)pending_char);
+  #endif
 
   return pending_char;
 }
 
-int MarlinSerialUSB::read() {
+int MarlinSerialUSB::read(void) {
   if (pending_char >= 0) {
     int ret = pending_char;
     pending_char = -1;
@@ -95,12 +100,14 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)c));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)c);
+  #endif
 
   return c;
 }
 
-bool MarlinSerialUSB::available() {
+bool MarlinSerialUSB::available(void) {
     /* If Pending chars */
   return pending_char >= 0 ||
     /* or USB CDC enumerated and configured on the PC side and some
@@ -108,8 +115,8 @@ bool MarlinSerialUSB::available() {
       (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
 }
 
-void MarlinSerialUSB::flush() { }
-void MarlinSerialUSB::flushTX() { }
+void MarlinSerialUSB::flush(void) { }
+void MarlinSerialUSB::flushTX(void) { }
 
 void MarlinSerialUSB::write(const uint8_t c) {
 
@@ -179,7 +186,7 @@ void MarlinSerialUSB::print(double n, int digits) {
   printFloat(n, digits);
 }
 
-void MarlinSerialUSB::println() {
+void MarlinSerialUSB::println(void) {
   print('\r');
   print('\n');
 }
@@ -255,7 +262,7 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 
   // Round correctly so that print(1.999, 2) prints as "2.00"
   double rounding = 0.5;
-  LOOP_L_N(i, digits)
+  for (uint8_t i = 0; i < digits; ++i)
     rounding *= 0.1;
 
   number += rounding;
@@ -279,12 +286,8 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 }
 
 // Preinstantiate
-#if SERIAL_PORT == -1
-  MarlinSerialUSB customizedSerial1;
-#endif
-#if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
-#endif
+MarlinSerialUSB customizedSerial1;
+
+#endif // SERIAL_PORT == -1
 
-#endif // HAS_USB_SERIAL
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/MarlinSerialUSB_Due.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,7 +28,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
 #include <WString.h>
 
@@ -43,11 +43,11 @@ public:
   MarlinSerialUSB() {};
   static void begin(const long);
   static void end();
-  static int peek();
-  static int read();
-  static void flush();
-  static void flushTX();
-  static bool available();
+  static int peek(void);
+  static int read(void);
+  static void flush(void);
+  static void flushTX(void);
+  static bool available(void);
   static void write(const uint8_t c);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
@@ -80,7 +80,7 @@ public:
   static void println(long, int = DEC);
   static void println(unsigned long, int = DEC);
   static void println(double, int = 2);
-  static void println();
+  static void println(void);
   operator bool() { return true; }
 
 private:
@@ -88,12 +88,6 @@ private:
   static void printFloat(double, uint8_t);
 };
 
-#if SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial1;
-#endif
+extern MarlinSerialUSB customizedSerial1;
 
-#if SERIAL_PORT_2 == -1
-  extern MarlinSerialUSB customizedSerial2;
-#endif
-
-#endif // HAS_USB_SERIAL
+#endif // SERIAL_PORT == -1

Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -29,9 +29,9 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#include "MarlinSerial.h"
-#include "InterruptVectors.h"
-#include "../../MarlinCore.h"
+#include "MarlinSerial_Due.h"
+#include "InterruptVectors_Due.h"
+#include "../../Marlin.h"
 
 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_r MarlinSerial<Cfg>::rx_buffer = { 0, 0, { 0 } };
 template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_t MarlinSerial<Cfg>::tx_buffer = { 0 };
@@ -45,7 +45,7 @@ template<typename Cfg> typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSeria
 // A SW memory barrier, to ensure GCC does not overoptimize loops
 #define sw_barrier() asm volatile("": : :"memory");
 
-#include "../../feature/e_parser.h"
+#include "../../feature/emergency_parser.h"
 
 // (called with RX interrupts disabled)
 template<typename Cfg>
@@ -178,7 +178,7 @@ FORCE_INLINE void MarlinSerial<Cfg>::store_rxd_char() {
 }
 
 template<typename Cfg>
-FORCE_INLINE void MarlinSerial<Cfg>::_tx_thr_empty_irq() {
+FORCE_INLINE void MarlinSerial<Cfg>::_tx_thr_empty_irq(void) {
   if (Cfg::TX_SIZE > 0) {
     // Read positions
     uint8_t t = tx_buffer.tail;
@@ -221,7 +221,7 @@ FORCE_INLINE void MarlinSerial<Cfg>::_tx_thr_empty_irq() {
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::UART_ISR() {
+void MarlinSerial<Cfg>::UART_ISR(void) {
   const uint32_t status = HWUART->UART_SR;
 
   // Data received?
@@ -308,13 +308,13 @@ void MarlinSerial<Cfg>::end() {
 }
 
 template<typename Cfg>
-int MarlinSerial<Cfg>::peek() {
+int MarlinSerial<Cfg>::peek(void) {
   const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
   return v;
 }
 
 template<typename Cfg>
-int MarlinSerial<Cfg>::read() {
+int MarlinSerial<Cfg>::read(void) {
 
   const ring_buffer_pos_t h = rx_buffer.head;
   ring_buffer_pos_t t = rx_buffer.tail;
@@ -354,13 +354,13 @@ int MarlinSerial<Cfg>::read() {
 }
 
 template<typename Cfg>
-typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available() {
+typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::available(void) {
   const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
   return (ring_buffer_pos_t)(Cfg::RX_SIZE + h - t) & (Cfg::RX_SIZE - 1);
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::flush() {
+void MarlinSerial<Cfg>::flush(void) {
   rx_buffer.tail = rx_buffer.head;
 
   if (Cfg::XONOFF) {
@@ -431,7 +431,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::flushTX() {
+void MarlinSerial<Cfg>::flushTX(void) {
   // TX
 
   if (Cfg::TX_SIZE == 0) {
@@ -520,7 +520,7 @@ void MarlinSerial<Cfg>::print(double n, int digits) {
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::println() {
+void MarlinSerial<Cfg>::println(void) {
   print('\r');
   print('\n');
 }
@@ -606,7 +606,7 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
 
   // Round correctly so that print(1.999, 2) prints as "2.00"
   double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
+  for (uint8_t i = 0; i < digits; ++i) rounding *= 0.1;
   number += rounding;
 
   // Extract the integer part of the number and print it
@@ -629,13 +629,23 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
 
 // If not using the USB port as serial port
 #if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
 #endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+#ifdef SERIAL_PORT_2
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/MarlinSerial_Due.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -27,9 +27,9 @@
  * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
  */
 
-#include <WString.h>
+#include "../shared/MarlinSerial.h"
 
-#include "../../inc/MarlinConfigPre.h"
+#include <WString.h>
 
 #define DEC 10
 #define HEX 16
@@ -108,21 +108,19 @@ protected:
   static ring_buffer_pos_t rx_max_enqueued;
 
   FORCE_INLINE static void store_rxd_char();
-  FORCE_INLINE static void _tx_thr_empty_irq();
-  static void UART_ISR();
+  FORCE_INLINE static void _tx_thr_empty_irq(void);
+  static void UART_ISR(void);
 
 public:
   MarlinSerial() {};
   static void begin(const long);
   static void end();
-  static int peek();
-  static int read();
-  static void flush();
-  static ring_buffer_pos_t available();
+  static int peek(void);
+  static int read(void);
+  static void flush(void);
+  static ring_buffer_pos_t available(void);
   static void write(const uint8_t c);
-  static void flushTX();
-
-  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+  static void flushTX(void);
 
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
@@ -151,7 +149,7 @@ public:
   static void println(long, int = DEC);
   static void println(unsigned long, int = DEC);
   static void println(double, int = 2);
-  static void println();
+  static void println(void);
   operator bool() { return true; }
 
 private:
@@ -165,18 +163,22 @@ struct MarlinSerialCfg {
   static constexpr int PORT               = serial;
   static constexpr unsigned int RX_SIZE   = RX_BUFFER_SIZE;
   static constexpr unsigned int TX_SIZE   = TX_BUFFER_SIZE;
-  static constexpr bool XONOFF            = ENABLED(SERIAL_XON_XOFF);
-  static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
-  static constexpr bool DROPPED_RX        = ENABLED(SERIAL_STATS_DROPPED_RX);
-  static constexpr bool RX_OVERRUNS       = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
-  static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
-  static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
+  static constexpr bool XONOFF            = bSERIAL_XON_XOFF;
+  static constexpr bool EMERGENCYPARSER   = bEMERGENCY_PARSER;
+  static constexpr bool DROPPED_RX        = bSERIAL_STATS_DROPPED_RX;
+  static constexpr bool RX_OVERRUNS       = bSERIAL_STATS_RX_BUFFER_OVERRUNS;
+  static constexpr bool RX_FRAMING_ERRORS = bSERIAL_STATS_RX_FRAMING_ERRORS;
+  static constexpr bool MAX_RX_QUEUED     = bSERIAL_STATS_MAX_RX_QUEUED;
 };
 
 #if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-#endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+#endif // SERIAL_PORT >= 0
+
+#ifdef SERIAL_PORT_2
+
   extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif

Marlin/src/HAL/HAL_DUE/Servo_Due.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -44,6 +44,7 @@
 
 #if HAS_SERVOS
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 
@@ -55,19 +56,19 @@ static volatile int8_t Channel[_Nbr_16timers];              // counter for the s
 void Servo_Handler(timer16_Sequence_t timer, Tc *pTc, uint8_t channel);
 
 #ifdef _useTimer1
-  void HANDLER_FOR_TIMER1() { Servo_Handler(_timer1, TC_FOR_TIMER1, CHANNEL_FOR_TIMER1); }
+  void HANDLER_FOR_TIMER1(void) { Servo_Handler(_timer1, TC_FOR_TIMER1, CHANNEL_FOR_TIMER1); }
 #endif
 #ifdef _useTimer2
-  void HANDLER_FOR_TIMER2() { Servo_Handler(_timer2, TC_FOR_TIMER2, CHANNEL_FOR_TIMER2); }
+  void HANDLER_FOR_TIMER2(void) { Servo_Handler(_timer2, TC_FOR_TIMER2, CHANNEL_FOR_TIMER2); }
 #endif
 #ifdef _useTimer3
-  void HANDLER_FOR_TIMER3() { Servo_Handler(_timer3, TC_FOR_TIMER3, CHANNEL_FOR_TIMER3); }
+  void HANDLER_FOR_TIMER3(void) { Servo_Handler(_timer3, TC_FOR_TIMER3, CHANNEL_FOR_TIMER3); }
 #endif
 #ifdef _useTimer4
-  void HANDLER_FOR_TIMER4() { Servo_Handler(_timer4, TC_FOR_TIMER4, CHANNEL_FOR_TIMER4); }
+  void HANDLER_FOR_TIMER4(void) { Servo_Handler(_timer4, TC_FOR_TIMER4, CHANNEL_FOR_TIMER4); }
 #endif
 #ifdef _useTimer5
-  void HANDLER_FOR_TIMER5() { Servo_Handler(_timer5, TC_FOR_TIMER5, CHANNEL_FOR_TIMER5); }
+  void HANDLER_FOR_TIMER5(void) { Servo_Handler(_timer5, TC_FOR_TIMER5, CHANNEL_FOR_TIMER5); }
 #endif
 
 void Servo_Handler(timer16_Sequence_t timer, Tc *tc, uint8_t channel) {

Marlin/src/HAL/HAL_DUE/Tone.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -18,19 +18,20 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
+#include "HAL_timers_Due.h"
 
 static pin_t tone_pin;
 volatile static int32_t toggles;

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -52,24 +52,26 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include <U8glib.h>
 
-#include "../../../MarlinCore.h"
+#include "../../../Marlin.h"
 
-#ifndef LCD_SPI_SPEED
-  #define LCD_SPI_SPEED SPI_QUARTER_SPEED
-#endif
+void spiBegin();
+void spiInit(uint8_t spiRate);
+void spiSend(uint8_t b);
+void spiSend(const uint8_t* buf, size_t n);
 
-#include "../../shared/HAL_SPI.h"
-#include "../fastio.h"
+#include "../../shared/Marduino.h"
+#include "../fastio_Due.h"
 
 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
    PIO_Configure(g_APinDescription[u8g->pin_list[pin_index]].pPort, PIO_OUTPUT_1,
@@ -99,7 +101,11 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 
       spiBegin();
 
-      spiInit(LCD_SPI_SPEED);
+      #ifndef SPI_SPEED
+        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
+      #endif
+      spiInit(2);
+
       break;
 
     case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -139,6 +145,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 
-#endif // __SAM3X8E__
+#endif //__SAM3X8E__

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -145,7 +145,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/marlinui.h"
+  #include "../../../lcd/ultralcd.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,10 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
+#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
+
+#undef SPI_SPEED
+#define SPI_SPEED 2  // About 2 MHz
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -141,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
+#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,7 +57,7 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include "../../shared/Delay.h"
 
@@ -80,7 +80,7 @@ Pio *SCK_pPio, *MOSI_pPio;
 uint32_t SCK_dwMask, MOSI_dwMask;
 
 void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     if (val & 0x80)
       MOSI_pPio->PIO_SODR = MOSI_dwMask;
     else
@@ -94,7 +94,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
 }
 
 void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; i++) {
     SCK_pPio->PIO_CODR = SCK_dwMask;
     DELAY_NS(50);
     if (val & 0x80)
@@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/endstop_interrupts.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -38,30 +38,45 @@
 #include "../../module/endstops.h"
 
 // One ISR for all EXT-Interrupts
-void endstop_ISR() { endstops.update(); }
+void endstop_ISR(void) { endstops.update(); }
 
 /**
  *  Endstop interrupts for Due based targets.
  *  On Due, all pins support external interrupt capability.
  */
 
-void setup_endstop_interrupts() {
-  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
-  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+void setup_endstop_interrupts(void) {
+  #if HAS_X_MAX
+    attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
+  #endif
+  #if HAS_X_MIN
+    attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Y_MAX
+    attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Y_MIN
+    attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MAX
+    attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MIN
+     attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z2_MAX
+    attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z2_MIN
+    attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z3_MAX
+    attachInterrupt(digitalPinToInterrupt(Z3_MAX_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z3_MIN
+    attachInterrupt(digitalPinToInterrupt(Z3_MIN_PIN), endstop_ISR, CHANGE);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
+  #endif
 }

Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.cpp

@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * The PWM module is only used to generate interrupts at specified times. It
+ * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
+ * that interrupt.
+ *
+ * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
+ * not have obvious ripple on the Vref signals.
+ *
+ * The data structures are setup to minimize the computation done by the ISR which
+ * minimizes ISR execution time.  Execution times are 0.8 to 1.1 microseconds.
+ *
+ * FIve PWM interrupt sources are used.  Channel 0 sets the base period.  All Vref
+ * signals are set active when this counter overflows and resets to zero.  The compare
+ * values in channels 1-4 are set to give the desired duty cycle for that Vref pin.
+ * When counter 0 matches the compare value then that channel generates an interrupt.
+ * The ISR checks the source of the interrupt and sets the corresponding pin inactive.
+ *
+ * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
+ */
+
+#include "../../../inc/MarlinConfig.h"
+
+#if MB(PRINTRBOARD_G2)
+
+#include "G2_PWM.h"
+
+volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
+                  *SODR_B = &PIOB->PIO_SODR,
+                  *CODR_A = &PIOA->PIO_CODR,
+                  *CODR_B = &PIOB->PIO_CODR;
+
+PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
+
+void Stepper::digipot_init() {
+
+  OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
+
+  #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
+  #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
+  #define WPRG_ALL       (PWM_WPCR_WPRG0 | PWM_WPCR_WPRG1 | PWM_WPCR_WPRG2 | PWM_WPCR_WPRG3 | PWM_WPCR_WPRG4 | PWM_WPCR_WPRG5)  // all Write Protect Groups
+
+  #define PWM_CLOCK_F    F_CPU / 1000000UL   // set clock to 1MHz
+
+  PMC->PMC_PCER1 = PMC_PCER1_PID36;                       // enable PWM controller clock (disabled on power up)
+
+  PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
+  PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
+  PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;                    // set channel 1 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;                    // set channel 2 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;                    // set channel 3 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;                    // set channel 4 to Clock A input & to left aligned
+
+  PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
+
+  PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
+  PWM->PWM_IER2 = PWM_IER2_CMPM0 | PWM_IER2_CMPM1 | PWM_IER2_CMPM2 | PWM_IER2_CMPM3 | PWM_IER2_CMPM4;        // generate interrupt on compare event
+
+  PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1]));   // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2]));   // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+
+  PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0 | PWM_SCM_SYNC1 | PWM_SCM_SYNC2 | PWM_SCM_SYNC3 | PWM_SCM_SYNC4; // sync 1-4 with 0, use mode 0 for updates
+
+  PWM->PWM_ENA = PWM_ENA_CHID0 | PWM_ENA_CHID1 | PWM_ENA_CHID2 | PWM_ENA_CHID3 | PWM_ENA_CHID4;         // enable the channels used by G2
+  PWM->PWM_IER1 = PWM_IER1_CHID0 | PWM_IER1_CHID1 | PWM_IER1_CHID2 | PWM_IER1_CHID3 | PWM_IER1_CHID4;        // enable interrupts for the channels used by G2
+
+  NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
+  NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
+}
+
+void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+
+  if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
+
+  switch (driver) {
+    case 0: PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+            PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+            PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    case 1: PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+            PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    default:PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+            PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+  }
+}
+
+volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
+
+void PWM_Handler() {
+  PWM_ISR1_STATUS = PWM->PWM_ISR1;
+  PWM_ISR2_STATUS = PWM->PWM_ISR2;
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                           // CHAN_0 interrupt
+    *ISR_table[0].set_register = ISR_table[0].write_mask;                                          // set X to active
+    *ISR_table[1].set_register = ISR_table[1].write_mask;                                          // set Y to active
+    *ISR_table[2].set_register = ISR_table[2].write_mask;                                          // set Z to active
+    *ISR_table[3].set_register = ISR_table[3].write_mask;                                          // set E to active
+  }
+  else {
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM1)  *ISR_table[0].clr_register = ISR_table[0].write_mask;   // set X to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM2)  *ISR_table[1].clr_register = ISR_table[1].write_mask;   // set Y to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM3)  *ISR_table[2].clr_register = ISR_table[2].write_mask;   // set Z to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM4)  *ISR_table[3].clr_register = ISR_table[3].write_mask;   // set E to inactive
+  }
+  return;
+}
+
+#endif // PRINTRBOARD_G2

Marlin/src/HAL/HAL_DUE/fastio/G2_PWM.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -63,7 +63,7 @@ extern PWM_map ISR_table[NUM_PWMS];
 extern uint32_t motor_current_setting[3];
 
 #define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
-#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)
+#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6 ; i++) work_table[i] = active_table[i]; }while(0)
 
 #define PWM_MR0 19999         // base repetition rate minus one count - 20mS
 #define PWM_PR 24             // prescaler value - prescaler divide by 24 + 1  -  1 MHz output

Marlin/src/HAL/HAL_DUE/fastio/G2_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/fastio_Due.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin
@@ -163,13 +163,10 @@
 #define SET_INPUT(IO)        _SET_INPUT(IO)
 // Set pin as input with pullup (wrapper)
 #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
-// Set pin as input with pulldown (substitution)
-#define SET_INPUT_PULLDOWN   SET_INPUT
-
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
@@ -177,7 +174,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
 
 // Shorthand
-#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
 
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)
@@ -480,7 +477,7 @@
 #define DIO91_PIN 15
 #define DIO91_WPORT PIOB
 
-#ifdef ARDUINO_SAM_ARCHIM
+#if ARDUINO_SAM_ARCHIM
 
   #define DIO92_PIN 11
   #define DIO92_WPORT PIOC

Marlin/src/HAL/HAL_DUE/inc/Conditionals_LCD.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_adv.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/Conditionals_post.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/HAL_DUE/inc/SanityCheck.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -40,7 +40,7 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
+#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
 
 #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
@@ -52,10 +52,6 @@
   #endif
 #endif
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
-#endif
-
-#if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+#if ENABLED(FAST_PWM_FAN)
+  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif

Marlin/src/HAL/HAL_DUE/persistent_store_eeprom.cpp

@@ -1,7 +1,7 @@
 /**
  * Marlin 3D Printer Firmware
  *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
  * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
  * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
@@ -17,29 +17,32 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef ARDUINO_ARCH_SAM
 
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
 #include "../../inc/MarlinConfig.h"
+#include "../shared/persistent_store_api.h"
 
-#if USE_WIRED_EEPROM
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
+#if !defined(E2END) && NONE(I2C_EEPROM, SPI_EEPROM)
+  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { eeprom_init(); return true; }
-bool PersistentStore::access_finish() { return true; }
+
+extern void eeprom_flush(void);
+
+bool PersistentStore::access_start() { return true; }
+
+bool PersistentStore::access_finish() {
+  #if NONE(I2C_EEPROM, SPI_EEPROM)
+    eeprom_flush();
+  #endif
+  return true;
+}
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
@@ -51,18 +54,18 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
       eeprom_write_byte(p, v);
       delay(2);
       if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
         return true;
       }
     }
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;
@@ -73,5 +76,7 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
   return false;
 }
 
-#endif // USE_WIRED_EEPROM
+size_t PersistentStore::capacity() { return E2END + 1; }
+
+#endif // EEPROM_SETTINGS
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/pinsDebug.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -179,4 +179,5 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
+ *
  */

Marlin/src/HAL/HAL_DUE/spi_pins.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -43,22 +43,22 @@
     #define SPI_PIN         87
     #define SPI_CHAN         1
   #endif
-  #define SD_SCK_PIN        76
-  #define SD_MISO_PIN       74
-  #define SD_MOSI_PIN       75
+  #define SCK_PIN           76
+  #define MISO_PIN          74
+  #define MOSI_PIN          75
 #else
   // defaults
   #define DUE_SOFTWARE_SPI
-  #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN      52
+  #ifndef SCK_PIN
+    #define SCK_PIN           52
   #endif
-  #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN     50
+  #ifndef MISO_PIN
+    #define MISO_PIN          50
   #endif
-  #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN     51
+  #ifndef MOSI_PIN
+    #define MOSI_PIN          51
   #endif
 #endif
 
 /* A.28, A.29, B.21, C.26, C.29 */
-#define SD_SS_PIN         SDSS
+#define SS_PIN            SDSS

Marlin/src/HAL/HAL_DUE/usb/arduino_due_x.h

@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**
@@ -93,5 +93,5 @@
 #define USB_VBOF_GPIO               (PIO_PB10_IDX)
 #define USB_VBOF_FLAGS              (PIO_PERIPH_A | PIO_DEFAULT)
 /*! Active level of the USB_VBOF output pin. */
-#define USB_VBOF_ACTIVE_STATE       LOW
+#define USB_VBOF_ACTIVE_LEVEL       LOW
 /* ------------------------------------------------------------------------ */

Marlin/src/HAL/HAL_DUE/usb/compiler.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H
@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-# undef __always_inline
+#	undef __always_inline
 #endif
-# define __always_inline   inline __attribute__((__always_inline__))
+#	define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-# define __always_inline   _Pragma("inline=forced")
+#	define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-# define __no_inline   __attribute__((noinline))
+#   define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-# define __no_inline   __attribute__((__noinline__))
+#	define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-# define __no_inline   _Pragma("inline=never")
+#	define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-  {\
-    if (!(expr)) while (true);\
-  }
+	{\
+		if (!(expr)) while (true);\
+	}
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -230,7 +230,7 @@
 
 /* Define NO_INIT attribute */
 #if 0 //ndef NO_INIT
-#ifdef __CC_ARM
+#if defined   ( __CC_ARM   )
 #   define NO_INIT __attribute__((zero_init))
 #elif defined ( __ICCARM__ )
 #   define NO_INIT __no_init
@@ -262,7 +262,7 @@
 //! @{
 typedef unsigned char           Bool; //!< Boolean.
 #ifndef __cplusplus
-#ifndef __bool_true_false_are_defined
+#if !defined(__bool_true_false_are_defined)
 typedef unsigned char           bool; //!< Boolean.
 #endif
 #endif
@@ -443,9 +443,9 @@ typedef struct
 #define DISABLE   0
 #define ENABLE    1
 #ifndef __cplusplus
-#ifndef __bool_true_false_are_defined
-#define false (1==0)
-#define true (1==1)
+#if !defined(__bool_true_false_are_defined)
+#define false 0
+#define true 1
 #endif
 #endif
 #ifndef PASS
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1UL << 31)) ?  0 : \
-                                ((u) & (1UL << 30)) ?  1 : \
-                                ((u) & (1UL << 29)) ?  2 : \
-                                ((u) & (1UL << 28)) ?  3 : \
-                                ((u) & (1UL << 27)) ?  4 : \
-                                ((u) & (1UL << 26)) ?  5 : \
-                                ((u) & (1UL << 25)) ?  6 : \
-                                ((u) & (1UL << 24)) ?  7 : \
-                                ((u) & (1UL << 23)) ?  8 : \
-                                ((u) & (1UL << 22)) ?  9 : \
-                                ((u) & (1UL << 21)) ? 10 : \
-                                ((u) & (1UL << 20)) ? 11 : \
-                                ((u) & (1UL << 19)) ? 12 : \
-                                ((u) & (1UL << 18)) ? 13 : \
-                                ((u) & (1UL << 17)) ? 14 : \
-                                ((u) & (1UL << 16)) ? 15 : \
-                                ((u) & (1UL << 15)) ? 16 : \
-                                ((u) & (1UL << 14)) ? 17 : \
-                                ((u) & (1UL << 13)) ? 18 : \
-                                ((u) & (1UL << 12)) ? 19 : \
-                                ((u) & (1UL << 11)) ? 20 : \
-                                ((u) & (1UL << 10)) ? 21 : \
-                                ((u) & (1UL <<  9)) ? 22 : \
-                                ((u) & (1UL <<  8)) ? 23 : \
-                                ((u) & (1UL <<  7)) ? 24 : \
-                                ((u) & (1UL <<  6)) ? 25 : \
-                                ((u) & (1UL <<  5)) ? 26 : \
-                                ((u) & (1UL <<  4)) ? 27 : \
-                                ((u) & (1UL <<  3)) ? 28 : \
-                                ((u) & (1UL <<  2)) ? 29 : \
-                                ((u) & (1UL <<  1)) ? 30 : \
+                                ((u) & (1ul << 31)) ?  0 : \
+                                ((u) & (1ul << 30)) ?  1 : \
+                                ((u) & (1ul << 29)) ?  2 : \
+                                ((u) & (1ul << 28)) ?  3 : \
+                                ((u) & (1ul << 27)) ?  4 : \
+                                ((u) & (1ul << 26)) ?  5 : \
+                                ((u) & (1ul << 25)) ?  6 : \
+                                ((u) & (1ul << 24)) ?  7 : \
+                                ((u) & (1ul << 23)) ?  8 : \
+                                ((u) & (1ul << 22)) ?  9 : \
+                                ((u) & (1ul << 21)) ? 10 : \
+                                ((u) & (1ul << 20)) ? 11 : \
+                                ((u) & (1ul << 19)) ? 12 : \
+                                ((u) & (1ul << 18)) ? 13 : \
+                                ((u) & (1ul << 17)) ? 14 : \
+                                ((u) & (1ul << 16)) ? 15 : \
+                                ((u) & (1ul << 15)) ? 16 : \
+                                ((u) & (1ul << 14)) ? 17 : \
+                                ((u) & (1ul << 13)) ? 18 : \
+                                ((u) & (1ul << 12)) ? 19 : \
+                                ((u) & (1ul << 11)) ? 20 : \
+                                ((u) & (1ul << 10)) ? 21 : \
+                                ((u) & (1ul <<  9)) ? 22 : \
+                                ((u) & (1ul <<  8)) ? 23 : \
+                                ((u) & (1ul <<  7)) ? 24 : \
+                                ((u) & (1ul <<  6)) ? 25 : \
+                                ((u) & (1ul <<  5)) ? 26 : \
+                                ((u) & (1ul <<  4)) ? 27 : \
+                                ((u) & (1ul <<  3)) ? 28 : \
+                                ((u) & (1ul <<  2)) ? 29 : \
+                                ((u) & (1ul <<  1)) ? 30 : \
                                 31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
-                                (u) & (1UL <<  1) ?  1 : \
-                                (u) & (1UL <<  2) ?  2 : \
-                                (u) & (1UL <<  3) ?  3 : \
-                                (u) & (1UL <<  4) ?  4 : \
-                                (u) & (1UL <<  5) ?  5 : \
-                                (u) & (1UL <<  6) ?  6 : \
-                                (u) & (1UL <<  7) ?  7 : \
-                                (u) & (1UL <<  8) ?  8 : \
-                                (u) & (1UL <<  9) ?  9 : \
-                                (u) & (1UL << 10) ? 10 : \
-                                (u) & (1UL << 11) ? 11 : \
-                                (u) & (1UL << 12) ? 12 : \
-                                (u) & (1UL << 13) ? 13 : \
-                                (u) & (1UL << 14) ? 14 : \
-                                (u) & (1UL << 15) ? 15 : \
-                                (u) & (1UL << 16) ? 16 : \
-                                (u) & (1UL << 17) ? 17 : \
-                                (u) & (1UL << 18) ? 18 : \
-                                (u) & (1UL << 19) ? 19 : \
-                                (u) & (1UL << 20) ? 20 : \
-                                (u) & (1UL << 21) ? 21 : \
-                                (u) & (1UL << 22) ? 22 : \
-                                (u) & (1UL << 23) ? 23 : \
-                                (u) & (1UL << 24) ? 24 : \
-                                (u) & (1UL << 25) ? 25 : \
-                                (u) & (1UL << 26) ? 26 : \
-                                (u) & (1UL << 27) ? 27 : \
-                                (u) & (1UL << 28) ? 28 : \
-                                (u) & (1UL << 29) ? 29 : \
-                                (u) & (1UL << 30) ? 30 : \
-                                (u) & (1UL << 31) ? 31 : \
+#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
+                                (u) & (1ul <<  1) ?  1 : \
+                                (u) & (1ul <<  2) ?  2 : \
+                                (u) & (1ul <<  3) ?  3 : \
+                                (u) & (1ul <<  4) ?  4 : \
+                                (u) & (1ul <<  5) ?  5 : \
+                                (u) & (1ul <<  6) ?  6 : \
+                                (u) & (1ul <<  7) ?  7 : \
+                                (u) & (1ul <<  8) ?  8 : \
+                                (u) & (1ul <<  9) ?  9 : \
+                                (u) & (1ul << 10) ? 10 : \
+                                (u) & (1ul << 11) ? 11 : \
+                                (u) & (1ul << 12) ? 12 : \
+                                (u) & (1ul << 13) ? 13 : \
+                                (u) & (1ul << 14) ? 14 : \
+                                (u) & (1ul << 15) ? 15 : \
+                                (u) & (1ul << 16) ? 16 : \
+                                (u) & (1ul << 17) ? 17 : \
+                                (u) & (1ul << 18) ? 18 : \
+                                (u) & (1ul << 19) ? 19 : \
+                                (u) & (1ul << 20) ? 20 : \
+                                (u) & (1ul << 21) ? 21 : \
+                                (u) & (1ul << 22) ? 22 : \
+                                (u) & (1ul << 23) ? 23 : \
+                                (u) & (1ul << 24) ? 24 : \
+                                (u) & (1ul << 25) ? 25 : \
+                                (u) & (1ul << 26) ? 26 : \
+                                (u) & (1ul << 27) ? 27 : \
+                                (u) & (1ul << 28) ? 28 : \
+                                (u) & (1ul << 29) ? 29 : \
+                                (u) & (1ul << 30) ? 30 : \
+                                (u) & (1ul << 31) ? 31 : \
                                 32)
 #endif
 #endif
@@ -1106,16 +1106,17 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-  union
-  {
-    uint32_t u32;
-    uint8_t u8[8];
-  }long_addr;
-  uint8_t index;
-  for (index = 0; index < 4; index++) {
-    long_addr.u8[index] = *data++;
-  }
-  return long_addr.u32;
+	union
+	{
+		uint32_t u32;
+		uint8_t u8[8];
+	}long_addr;
+	uint8_t index;
+	for (index = 0; index < 4; index++)
+	{
+		long_addr.u8[index] = *data++;
+	}
+	return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/HAL_DUE/usb/conf_access.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_

Marlin/src/HAL/HAL_DUE/usb/conf_clock.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED

Marlin/src/HAL/HAL_DUE/usb/conf_usb.h

@@ -41,14 +41,16 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_
 #define _CONF_USB_H_
 
 #undef UNUSED                           /* To avoid a macro clash as macros.h already defines it */
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../../core/macros.h"       /* For ENABLED()/DISABLED() */
+#include "../../../core/boards.h"       /* For MB() */
+#include "../../../../Configuration.h"  /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
 #include "compiler.h"
 
 /**
@@ -57,6 +59,8 @@
  */
 
 //! Device definition (mandatory)
+#define  USB_DEVICE_VENDOR_ID             0x03EB /* ATMEL VID */
+#define  USB_DEVICE_PRODUCT_ID            0x2424 /* MSC / CDC */
 #define  USB_DEVICE_MAJOR_VERSION         1
 #define  USB_DEVICE_MINOR_VERSION         0
 #define  USB_DEVICE_POWER                 100 // Consumption on Vbus line (mA)
@@ -66,6 +70,15 @@
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_SELF_POWERED)
 //  (USB_CONFIG_ATTR_REMOTE_WAKEUP|USB_CONFIG_ATTR_BUS_POWERED)
 
+//! USB Device string definitions (Optional)
+#define  USB_DEVICE_MANUFACTURE_NAME      "marlinfw.org"
+#ifdef CUSTOM_MACHINE_NAME
+  #define  USB_DEVICE_PRODUCT_NAME        CUSTOM_MACHINE_NAME
+#else
+  #define  USB_DEVICE_PRODUCT_NAME        "3D Printer"
+#endif
+#define  USB_DEVICE_SERIAL_NAME           "123985739853"
+
 /**
  * Device speeds support
  * Low speed not supported by CDC and MSC
@@ -78,6 +91,10 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED
 
+#if MB(ARCHIM1)
+  #define USB_DEVICE_FULL_SPEED
+#endif
+
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
   #if (UC3A3||UC3A4)

Marlin/src/HAL/HAL_DUE/usb/ctrl_access.c

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

Marlin/src/HAL/HAL_DUE/usb/ctrl_access.h

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 

Marlin/src/HAL/HAL_DUE/usb/genclk.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_GENCLK_H_INCLUDED