btt stm32 CR6 Fixes

* Add Dagoma D6 board as used in their DiscoUltimate v2 TMC.

Taken from the Dagoma fork of Marlin DU_MC branch where it is called FYSETC_DAGOMA_F5 and explicitly confirmed by Dagoma as being the D6:

"the BOARD_FYSETC_DAGOMA_F5 is effectively the definition for the D6"

---------

Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Co-authored-by: Orel <37673727+0r31@users.noreply.github.com>

.github/lock.yml

@@ -1,40 +0,0 @@
-#
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
-#
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: [ 'no-locking' ]
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: >
-  This thread has been automatically locked since there has not been
-  any recent activity after it was closed. Please open a new issue for
-  related bugs.
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: true
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo

.github/workflows/bump-date.yml

@@ -19,7 +19,7 @@ jobs:
     steps:
 
     - name: Check out bugfix-2.0.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         ref: bugfix-2.0.x
 
@@ -39,7 +39,7 @@ jobs:
         exit 0
 
     - name: Check out bugfix-2.1.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
       with:
         ref: bugfix-2.1.x
 

.github/workflows/ci-build-tests.yml

@@ -1,9 +1,9 @@
 #
-# test-builds.yml
+# ci-build-tests.yml
 # Do test builds to catch compile errors
 #
 
-name: CI
+name: CI - Build Tests
 
 on:
   pull_request:
@@ -27,7 +27,7 @@ on:
 
 jobs:
   test_builds:
-    name: Run All Tests
+    name: Build Test
     if: github.repository == 'MarlinFirmware/Marlin'
 
     runs-on: ubuntu-latest
@@ -152,7 +152,7 @@ jobs:
       uses: actions/checkout@v4
 
     - name: Cache pip
-      uses: actions/cache@v3
+      uses: actions/cache@v4
       with:
         path: ~/.cache/pip
         key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
@@ -160,13 +160,13 @@ jobs:
           ${{ runner.os }}-pip-
 
     - name: Cache PlatformIO
-      uses: actions/cache@v3
+      uses: actions/cache@v4
       with:
         path: ~/.platformio
         key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
 
     - name: Select Python 3.9
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
       with:
         python-version: '3.9'
         architecture: 'x64'

.github/workflows/ci-unit-tests.yml

@@ -0,0 +1,73 @@
+#
+# ci-unit-tests.yml
+# Build and execute unit tests to catch functional issues in code
+#
+
+name: CI - Unit Tests
+
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    # Cannot be enabled on 2.1.x until it contains the unit test framework
+    #- 2.1.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+  push:
+    branches:
+    - bugfix-2.1.x
+    # Cannot be enabled on 2.1.x until it contains the unit test framework
+    #- 2.1.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  # This runs all unit tests as a single job. While it should be possible to break this up into
+  # multiple jobs, they currently run quickly and finish long before the compilation tests.
+  run_unit_tests:
+    name: Unit Test
+    # These tests will only be able to run on the bugfix-2.1.x branch, until the next release
+    # pulls them into additional branches.
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Cache PlatformIO
+      uses: actions/cache@v4
+      with:
+        path: ~/.platformio
+        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U platformio
+        pio upgrade --dev
+        pio pkg update --global
+
+    - name: Run All Unit Tests
+      run: |
+        make unit-test-all-local

.github/workflows/clean-closed.yml

@@ -32,7 +32,7 @@ jobs:
           - "Needs: Work"
 
     steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
       - name: Remove Labels
         uses: actions-ecosystem/action-remove-labels@v1
         with:

.github/workflows/close-stale.yml

@@ -17,7 +17,7 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-    - uses: actions/stale@v8
+    - uses: actions/stale@v9
       with:
         repo-token: ${{ secrets.GITHUB_TOKEN }}
         stale-issue-message: |

.github/workflows/lock-closed.yml

@@ -17,15 +17,15 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-    - uses: dessant/lock-threads@v2
+    - uses: dessant/lock-threads@v5
       with:
         github-token: ${{ github.token }}
         process-only: 'issues'
-        issue-lock-inactive-days: '60'
+        issue-inactive-days: '60'
-        issue-exclude-created-before: ''
+        exclude-issue-created-before: ''
-        issue-exclude-labels: 'no-locking'
+        exclude-any-issue-labels: 'no-locking'
-        issue-lock-labels: ''
+        add-issue-labels: ''
-        issue-lock-comment: >
+        issue-comment: >
           This issue has been automatically locked since there
           has not been any recent activity after it was closed.
           Please open a new issue for related bugs.

Makefile

@@ -5,13 +5,19 @@ CONTAINER_IMAGE := marlin-dev
 
 help:
 	@echo "Tasks for local development:"
-	@echo "* format-pins:                 Reformat all pins files"
+	@echo "make marlin                    : Build marlin for the configured board"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
+	@echo "make format-pins               : Reformat all pins files"
-	@echo "* tests-single-local:          Run a single test locally"
+	@echo "make tests-single-ci           : Run a single test from inside the CI"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker"
+	@echo "make tests-single-local        : Run a single test locally"
-	@echo "* tests-all-local:             Run all tests locally"
+	@echo "make tests-single-local-docker : Run a single test locally, using docker"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker"
+	@echo "make tests-all-local           : Run all tests locally"
-	@echo "* setup-local-docker:          Build the local docker image"
+	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
+#	@echo "make unit-test-single-ci      : Run a single code test from inside the CI"
+#	@echo "make unit-test-single-local   : Run a single code test locally"
+#	@echo "make unit-test-single-local-docker : Run a single code test locally, using docker-compose"
+	@echo "make unit-test-all-local      : Run all code tests locally"
+	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker-compose"
+	@echo "make setup-local-docker        : Setup local docker-compose"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -24,46 +30,62 @@ help:
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
+
+marlin:
+	./buildroot/bin/mftest -a
+.PHONY: marlin
 
 tests-single-ci:
 	export GIT_RESET_HARD=true
 	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) PLATFORMIO_BUILD_FLAGS=-DGITHUB_ACTION
-.PHONY: tests-single-ci
 
 tests-single-local:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
-.PHONY: tests-single-local
 
 tests-single-local-docker:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
-.PHONY: tests-single-local-docker
 
 tests-all-local:
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
-.PHONY: tests-all-local
 
 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-.PHONY: tests-all-local-docker
+
+#unit-test-single-ci:
+#	export GIT_RESET_HARD=true
+#	$(MAKE) unit-test-single-local TEST_TARGET=$(TEST_TARGET)
+
+# TODO: How can we limit tests with ONLY_TEST with platformio?
+#unit-test-single-local:
+#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local" ; return 1; fi
+#	platformio run -t marlin_$(TEST_TARGET)
+
+#unit-test-single-local-docker:
+#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local-docker" ; return 1; fi
+#	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+#	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local TEST_TARGET=$(TEST_TARGET) ONLY_TEST="$(ONLY_TEST)"
+
+unit-test-all-local:
+	platformio run -t test-marlin -e linux_native_test
+
+unit-test-all-local-docker:
+	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-all-local
 
 setup-local-docker:
-	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
+	$(CONTAINER_RT_BIN) buildx build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
-.PHONY: setup-local-docker
 
 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')
 
-.PHONY: $(PINS)
-
 $(PINS): %:
-	@echo "Formatting $@" && node buildroot/share/scripts/pinsformat.js $@
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@
 
 format-pins: $(PINS)

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2023 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 

Marlin/Version.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,25 +28,177 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.1.x"
+#define SHORT_BUILD_VERSION "DW7.4.9"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+
+#if(ENABLED(MachineMini))
+  #define VerChar1 "M"
+#elif(ENABLED(MachineEnder2))
+  #define VerChar1 "E2"
+#elif(ENABLED(MachineEnder2Pro))
+  #define VerChar1 "E2P"
+#elif(ENABLED(MachineEnder3))
+  #define VerChar1 "E3"
+#elif ENABLED(MachineEnder3V2)
+  #define VerChar1 "E3V2"
+#elif ENABLED(MachineEnder3S1)
+  #define VerChar1 "E3S1"
+#elif ENABLED(MachineEnder3Max)
+  #define VerChar1 "E3M"
+#elif(ENABLED(MachineEnder4))
+  #define VerChar1 "E4"
+#elif(ENABLED(MachineEnder5))
+  #define VerChar1 "E5"
+#elif(ENABLED(MachineEnder6))
+  #define VerChar1 "E6"
+#elif(ENABLED(MachineEnder7))
+  #define VerChar1 "E7"
+#elif(ENABLED(MachineSermoonD1))
+  #define VerChar1 "D1"
+#elif(ENABLED(MachineEnder5Plus))
+  #define VerChar1 "E5P"
+#elif(ENABLED(MachineCR20))
+  #define VerChar1 "2"
+#elif(ENABLED(MachineCR10Orig))
+  #define VerChar1 "O"
+#elif(ENABLED(MachineCR10Std))
+  #define VerChar1 "S"
+#elif(ENABLED(MachineCRX))
+  #define VerChar1 "X"
+#elif(ENABLED(MachineCR6))
+  #define VerChar1 "CR6"
+#elif(ENABLED(MachineCR5))
+  #define VerChar1 "CR5"
+#elif(ENABLED(MachineCR6Max))
+  #define VerChar1 "CR6M"
+#elif(ENABLED(MachineS4))
+  #define VerChar1 "4"
+#elif(ENABLED(MachineS5) || ENABLED(MachineCR10Max))
+  #define VerChar1 "5"
+#elif ENABLED(MachineCR2020)
+  #define VerChar1 "20"
+#elif(ENABLED(MachineCR30))
+  #define VerChar1 "CR30"
+#endif
+
+#if(ENABLED(HotendStock))
+#define VerChar2 "S"
+#elif(ENABLED(HotendE3D))
+#define VerChar2 "E"
+#elif ENABLED(HotendMosquito)
+#define VerChar2 "M"
+#endif
+
+#if(ENABLED(HotendAllMetal))
+#define VerChar3 "M"
+#else
+#define VerChar3 "S"
+#endif
+
+
+#if(ENABLED(BedAC))
+#define VerChar4 "A"
+#elif(ENABLED(BedDC))
+#define VerChar4 "D"
+#else
+#define VerChar4 "N"
+#endif
+
+#if(ENABLED(ABL_EZABL))
+#define VerChar5 "A"
+#elif(ENABLED(ABL_BLTOUCH))
+#define VerChar5 "B"
+#else
+#define VerChar5 "N"
+#endif
+
+#if(ENABLED(ABL_UBL))
+#define VerChar6 "U"
+#elif(ENABLED(ABL_BI))
+#define VerChar6 "B"
+#else
+#define VerChar6 "N"
+#endif
+
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D " VerChar1 VerChar2 VerChar3 VerChar4 VerChar5 VerChar6
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2024-01-09"
+#define STRING_DISTRIBUTION_DATE "2024-04-08"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#if(ENABLED(MachineMini))
+  #define CUSTOM_MACHINE_NAME "Mini SuPeR"
+#elif(ENABLED(MachineCR10Smart))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10Smart"
+#elif(ENABLED(MachineCR10SmartPro))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10SmartPro"
+#elif(ENABLED(MachineEnder2))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender2"
+#elif(ENABLED(MachineEnder2Pro))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender2 Pro"
+#elif(ENABLED(MachineEnder3))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3"
+#elif(ENABLED(MachineEnder3Max))
+  #define CUSTOM_MACHINE_NAME "TM3D E3Max"
+#elif(ENABLED(MachineEnder6))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender6"
+#elif(ENABLED(MachineEnder7))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender7"
+#elif(ENABLED(MachineEnder3V2))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3V2"
+#elif(ENABLED(MachineEnder3S1))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3S1"
+#elif(ENABLED(MachineEnder4))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender4"
+#elif(ENABLED(MachineEnder5))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender5"
+#elif(ENABLED(MachineEnder5Plus))
+  #define CUSTOM_MACHINE_NAME "TM3D E5 Plus"
+#elif(ENABLED(MachineCR20))
+  #define CUSTOM_MACHINE_NAME "SuPeR CR-20"
+#elif(ENABLED(MachineCR10Orig))
+  #define CUSTOM_MACHINE_NAME "SuPeR CR-10"
+#elif(ENABLED(MachineCRX))
+  #define CUSTOM_MACHINE_NAME "TM3D CR-X"
+#elif ENABLED(MachineCR10SProV2)
+  #define CUSTOM_MACHINE_NAME "TM3D 10SProV2"
+#elif(ENABLED(MachineCR10SPro))
+  #define CUSTOM_MACHINE_NAME "TM3D 10S Pro"
+#elif(ENABLED(MachineCR10Max))
+  #define CUSTOM_MACHINE_NAME "TM3D Max"
+#elif(ENABLED(MachineCR10SV3))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10V3"
+#elif(ENABLED(MachineCR10SV2))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10V2"
+#elif(ENABLED(MachineCR10Std))
+  #define CUSTOM_MACHINE_NAME "300 SuPeR"
+#elif(ENABLED(MachineS4))
+  #define CUSTOM_MACHINE_NAME "400 SuPeR"
+#elif(ENABLED(MachineS5))
+  #define CUSTOM_MACHINE_NAME "500 SuPeR"
+#elif ENABLED(MachineCR2020)
+  #define CUSTOM_MACHINE_NAME "TM3D 2020"
+#elif ENABLED(MachineSermoonD1)
+  #define CUSTOM_MACHINE_NAME "SermoonD1"
+#elif ENABLED(MachineCR5)
+  #define CUSTOM_MACHINE_NAME "CR5 Pro"
+#elif ENABLED(MachineCR6)
+  #define CUSTOM_MACHINE_NAME "CR6"
+#elif ENABLED(MachineCR6Max)
+  #define CUSTOM_MACHINE_NAME "CR6 Max"
+#elif ENABLED(MachineCR30)
+  #define CUSTOM_MACHINE_NAME "CR30 Printmill"
+#endif
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +206,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin_2.0"
 
 /**
  * Default generic printer UUID.
@@ -65,12 +217,12 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "marlinfw.org"
+#define WEBSITE_URL "tinymachines3d.com"
 
 /**
  * Set the vendor info the serial USB interface, if changable
  * Currently only supported by DUE platform
  */
-//#define USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -29,75 +29,65 @@
  *  - http://www.marlinfw.org/tools/u8glib/converter.html
  *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
  */
-#include <avr/pgmspace.h>
 
 #define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  60
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+#define CUSTOM_BOOTSCREEN_INVERTED
 
-const unsigned char custom_start_bmp[574] PROGMEM = {
+const unsigned char custom_start_bmp[] PROGMEM = {
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0xc, 0x0, 0x0, 0x0, 0x0,
+  B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0xc, 0x0, 0x0, 0x0, 0x0,
+  B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x12, 0x0, 0x0, 0x0, 0x0,
+  B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x23, 0x0, 0x0, 0x0, 0x0,
+  B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x21, 0x0, 0x0, 0x0, 0x0,
+  B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x0, 0x0, 0x0, 0x4c, 0x80, 0x0, 0x0, 0x0,
+  B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
-0x0, 0x0, 0x0, 0x5e, 0x80, 0x0, 0x0, 0x0,
+  B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-0x0, 0x0, 0x0, 0x92, 0x40, 0x0, 0x0, 0x0,
+  B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
-0x0, 0x0, 0x0, 0xa1, 0x40, 0x0, 0x0, 0x0,
+  B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111,
-0x0, 0x0, 0x1, 0x21, 0x20, 0x0, 0x0, 0x0,
+  B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111,
-0x0, 0x0, 0x2, 0x7f, 0x90, 0x0, 0x0, 0x0,
+  B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111,
-0x0, 0x0, 0x2, 0x0, 0x10, 0x0, 0x0, 0x0,
+  B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111,
-0x0, 0x0, 0x7, 0xff, 0xf8, 0x0, 0x0, 0x0,
+  B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111,
-0x0, 0x0, 0x4, 0x0, 0x8, 0x0, 0x0, 0x0,
+  B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
-0x0, 0x0, 0x8, 0x0, 0x4, 0x0, 0x0, 0x0,
+  B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111,
-0x0, 0x0, 0x8, 0x0, 0x6, 0x0, 0x0, 0x0,
+  B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
-0x0, 0x0, 0x10, 0x0, 0x2, 0x0, 0x0, 0x0,
+  B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111,
-0x0, 0x0, 0x30, 0x1e, 0x1, 0x0, 0x0, 0x0,
+  B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111,
-0x0, 0x0, 0x20, 0x7f, 0x81, 0x0, 0x0, 0x0,
+  B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111,
-0x0, 0x0, 0x41, 0xff, 0xe0, 0x80, 0x0, 0x0,
+  B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111,
-0x0, 0x0, 0x43, 0xfc, 0xf0, 0x80, 0x0, 0x0,
+  B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111,
-0x0, 0x0, 0x87, 0x3b, 0x78, 0x40, 0x0, 0x0,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111,
-0x0, 0x1, 0x8e, 0xdb, 0xfc, 0x60, 0x0, 0x0,
+  B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111,
-0x0, 0x1, 0xf, 0xeb, 0xcc, 0x20, 0x0, 0x0,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
-0x0, 0x2, 0x1f, 0xed, 0xb6, 0x10, 0x0, 0x0,
+  B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-0x0, 0x2, 0x1f, 0xde, 0xb6, 0x10, 0x0, 0x0,
+  B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
-0x0, 0x4, 0x39, 0xcd, 0x7f, 0x8, 0x0, 0x0,
+  B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
-0x0, 0x4, 0x36, 0xe0, 0xff, 0x8, 0x0, 0x0,
+  B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-0x0, 0x8, 0x7e, 0xc0, 0xbb, 0x84, 0x0, 0x0,
+  B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
-0x0, 0x18, 0x7f, 0x0, 0x5d, 0x86, 0x0, 0x0,
+  B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-0x0, 0x10, 0x7f, 0xc0, 0xed, 0x82, 0x0, 0x0,
+  B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-0x0, 0x20, 0x3c, 0xc0, 0x73, 0x1, 0x0, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
-0x0, 0x20, 0x3b, 0x33, 0x7f, 0x1, 0x0, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
-0x0, 0x70, 0x1b, 0xe7, 0x7e, 0x3, 0x80, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
-0x0, 0xc8, 0x1d, 0xee, 0xde, 0x4, 0xc0, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
-0x0, 0x88, 0xf, 0xde, 0xdc, 0x4, 0x40, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
-0x1, 0x24, 0xf, 0xdf, 0x3c, 0x9, 0x20, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
-0x1, 0x26, 0x7, 0xdb, 0xf8, 0x19, 0x20, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x2, 0x72, 0x3, 0xe7, 0xf0, 0x13, 0x90, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x2, 0x51, 0x1, 0xff, 0xe0, 0x22, 0x90, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x4, 0x89, 0x0, 0x7f, 0x80, 0x24, 0x48, 0x0,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
-0x9, 0x4, 0x80, 0x1e, 0x0, 0x48, 0x24, 0x0,
+  B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111,
-0xb, 0xfe, 0x40, 0x0, 0x0, 0xdf, 0xf4, 0x0,
+  B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111,
-0x10, 0x0, 0x40, 0x0, 0x0, 0x80, 0x2, 0x0,
+  B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111,
-0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0x0,
+  B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
+  B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011,
-0x10, 0x22, 0x10, 0x3c, 0x3c, 0xe, 0x1f, 0x0,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111,
-0x10, 0x22, 0x10, 0x4, 0x22, 0x11, 0x4, 0x0,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111,
-0x10, 0x22, 0x10, 0x8, 0x22, 0x11, 0x4, 0x0,
+  B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111
-0x10, 0x22, 0x10, 0x8, 0x3c, 0x11, 0x4, 0x0,
-0x10, 0x22, 0x10, 0x10, 0x22, 0x11, 0x4, 0x0,
-0x10, 0x22, 0x10, 0x20, 0x22, 0x11, 0x4, 0x0,
-0x1e, 0x1c, 0x1e, 0x3c, 0x3c, 0xe, 0x4, 0x0,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0
 };

Marlin/_Statusscreen.h

@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            3
+#define STATUS_LOGO_WIDTH       24
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B10000000,B00000000,B00000001,
+  B10001110,B00000000,B11100001,
+  B10011111,B00000001,B11110001,
+  B10010011,B10000001,B00111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10111001,B11111001,
+  B10001111,B00101000,B11110001,
+  B10000000,B00111000,B00000001,
+  B10000000,B00000000,B00000001,
+  B10011111,B11111111,B11111001,
+  B10010001,B01110100,B10011001,
+  B10011011,B00000110,B10101001,
+  B10011011,B01010100,B10101001,
+  B10011011,B01010110,B10101001,
+  B10011011,B01010100,B10011001,
+  B10011111,B11111111,B11111001,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif

Marlin/src/HAL/AVR/HAL.cpp

@@ -81,6 +81,12 @@ void MarlinHAL::init() {
   #if HAS_SERVO_3
     OUT_WRITE(SERVO3_PIN, LOW);
   #endif
+  #if HAS_SERVO_4
+    OUT_WRITE(SERVO4_PIN, LOW);
+  #endif
+  #if HAS_SERVO_5
+    OUT_WRITE(SERVO5_PIN, LOW);
+  #endif
 
   init_pwm_timers();   // Init user timers to default frequency - 1000HZ
 

Marlin/src/HAL/AVR/HAL.h

@@ -141,8 +141,8 @@ typedef Servo hal_servo_t;
     #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
   #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
+  #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
 #endif
 

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -119,7 +119,6 @@ void spiBegin() {
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
   }
 
-
   /** begin spi transaction */
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
     // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
     SPSR = clockDiv | 0x01;
   }
 
-
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI
 
   // ------------------------

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
   template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
   MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);
 
-  #if HAS_DGUS_LCD
+  #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
     template<typename Cfg>
     typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
       const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -205,7 +205,7 @@
     static ring_buffer_pos_t available();
     static void write(const uint8_t c);
     static void flushTX();
-    #if HAS_DGUS_LCD
+    #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
       static ring_buffer_pos_t get_tx_buffer_free();
     #endif
 
@@ -276,7 +276,7 @@
     static constexpr bool DROPPED_RX        = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr bool RX_OVERRUNS       = ALL(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = (ANY(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS) || ENABLED(DWINOS_4));
   };
 
   typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;

Marlin/src/HAL/AVR/Servo.cpp

@@ -63,7 +63,6 @@
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 
-
 /************ static functions common to all instances ***********************/
 
 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {

Marlin/src/HAL/AVR/eeprom.cpp

@@ -35,14 +35,14 @@
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   uint16_t written = 0;
   while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     uint8_t v = *value;
     if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
@@ -61,7 +61,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }
 
 #endif
 
-
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
   if (digitalPinHasPCICR(pin)) {

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -679,7 +679,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF
 
-
 /**
  * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
  * do not function the same as the other Arduino extensions.

Marlin/src/HAL/AVR/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/AVR/pinsDebug.h

@@ -163,7 +163,6 @@ bool pwm_status(uint8_t pin) {
   SERIAL_ECHO_SP(2);
 } // pwm_status
 
-
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
     { &TCCR0A, &TCCR0B, &TIMSK0 },
     { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -181,7 +180,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
   #endif
 };
 
-
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 
   #ifdef TIMER0A
@@ -217,7 +215,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
   #endif
 };
 
-
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   U8G_ATOMIC_END();
 }
 
-
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -42,7 +42,7 @@
 // Public functions
 // ------------------------
 
-#if ANY(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
+#if ANY(SOFTWARE_SPI, FORCE_SOFT_SPI)
 
   // ------------------------
   // Software SPI

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
   template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -958,14 +958,14 @@ static void ee_Init() {
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { ee_Init();  return true; }
 bool PersistentStore::access_finish() { ee_Flush(); return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   uint16_t written = 0;
   while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     uint8_t v = *value;
     if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       ee_Write(uint32_t(p), v);
@@ -984,7 +984,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
-    uint8_t c = ee_Read(uint32_t(pos));
+    uint8_t c = ee_Read(uint32_t(REAL_EEPROM_ADDR(pos)));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -36,14 +36,14 @@
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   uint16_t written = 0;
   while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     uint8_t v = *value;
     if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
@@ -62,7 +62,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;
 
 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }
 
-
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
   { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
   { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53
 
-
   // 54 .. 65 - Analog pins
   // ----------------------
   { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0

Marlin/src/HAL/DUE/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -72,10 +72,10 @@
 
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
       #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
     #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #elif ENABLED(SOFTWARE_SPI)
     #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
   #endif
 #endif

Marlin/src/HAL/DUE/spi_pins.h

@@ -48,7 +48,7 @@
   #define SD_MOSI_PIN       75
 #else
   // defaults
-  #define DUE_SOFTWARE_SPI
+  #define SOFTWARE_SPI
   #ifndef SD_SCK_PIN
     #define SD_SCK_PIN      52
   #endif

Marlin/src/HAL/DUE/usb/compiler.h

@@ -142,7 +142,6 @@
  */
 #define COMPILER_PACK_RESET()          COMPILER_PRAGMA(pack())
 
-
 /**
  * \brief Set aligned boundary.
  */
@@ -283,7 +282,6 @@ typedef double                  F64;  //!< 64-bit floating-point number.
 typedef uint32_t                iram_size_t;
 //! @}
 
-
 /*! \name Status Types
  */
 //! @{
@@ -291,7 +289,6 @@ typedef bool                Status_bool_t;  //!< Boolean status.
 typedef U8                  Status_t;       //!< 8-bit-coded status.
 //! @}
 
-
 /*! \name Aliasing Aggregate Types
  */
 //! @{
@@ -462,7 +459,6 @@ typedef struct
 #endif
 //! @}
 
-
 #ifndef __ASSEMBLY__ // not for assembling.
 
 //! \name Optimization Control
@@ -581,7 +577,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Zero-Bit Counting
  *
  * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
@@ -692,7 +687,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Bit Reversing
  */
 //! @{
@@ -732,7 +726,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Alignment
  */
 //! @{
@@ -798,7 +791,6 @@ typedef struct
  */
 #define Long_call(addr)                   ((*(void (*)(void))(addr))())
 
-
 /*! \name MCU Endianism Handling
  * ARM is MCU little endianism.
  */
@@ -868,7 +860,6 @@ typedef struct
 #define  CPU_TO_BE32(x) swap32(x)
 //! @}
 
-
 /*! \name Endianism Conversion
  *
  * The same considerations as for clz and ctz apply here but GCC's
@@ -955,7 +946,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Target Abstraction
  */
 //! @{
@@ -997,7 +987,6 @@ typedef U8                  Byte;       //!< 8-bit unsigned integer.
 
 #endif  // #ifndef __ASSEMBLY__
 
-
 #ifdef __ICCARM__
 #define SHORTENUM           __packed
 #elif defined(__GNUC__)

Marlin/src/HAL/DUE/usb/conf_access.h

@@ -81,7 +81,6 @@
 #define LUN_0_NAME                              "\"SD/MMC Card\""
 //! @}
 
-
 /*! \name Actions Associated with Memory Accesses
  *
  * Write here the action to associate with each memory access.
@@ -112,5 +111,4 @@
 #define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
 //! @}
 
-
 #endif // _CONF_ACCESS_H_

Marlin/src/HAL/DUE/usb/conf_clock.h

@@ -96,5 +96,4 @@
 // - UPLL frequency: 480MHz
 // - USB clock: 480 / 1 = 480MHz
 
-
 #endif /* CONF_CLOCK_H_INCLUDED */

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -88,7 +88,6 @@
 #endif
 //@}
 
-
 /**
  * USB Device Callbacks definitions (Optional)
  * @{
@@ -150,7 +149,6 @@
 
 //@}
 
-
 /**
  * USB Interface Configuration
  * @{
@@ -210,7 +208,6 @@
   //@}
   //@}
 
-
   /**
    * Configuration of MSC interface
    * @{
@@ -245,7 +242,6 @@
 
   //@}
 
-
   /**
    * Description of Composite Device
    * @{

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -68,7 +68,6 @@
 #endif
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #ifdef FREERTOS_USED
@@ -112,7 +111,6 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;
 
 #endif  // FREERTOS_USED
 
-
 #if MAX_LUN
 
 /*! \brief Initializes an entry of the LUN descriptor table.
@@ -242,17 +240,14 @@ static const struct
 
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 bool g_wr_protect;
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
 
-
 #ifdef FREERTOS_USED
 
 bool ctrl_access_init(void)
@@ -270,7 +265,6 @@ bool ctrl_access_init(void)
   return true;
 }
 
-
 /*! \brief Locks accesses to LUNs.
  *
  * \return \c true if the access was successfully locked, else \c false.
@@ -288,7 +282,6 @@ static bool ctrl_access_lock(void)
 
 #endif  // FREERTOS_USED
 
-
 U8 get_nb_lun(void)
 {
 #if MEM_USB == ENABLE
@@ -309,13 +302,11 @@ U8 get_nb_lun(void)
 #endif
 }
 
-
 U8 get_cur_lun(void)
 {
   return LUN_ID_0;
 }
 
-
 Ctrl_status mem_test_unit_ready(U8 lun)
 {
   Ctrl_status status;
@@ -337,7 +328,6 @@ Ctrl_status mem_test_unit_ready(U8 lun)
   return status;
 }
 
-
 Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
 {
   Ctrl_status status;
@@ -359,7 +349,6 @@ Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
   return status;
 }
 
-
 U8 mem_sector_size(U8 lun)
 {
   U8 sector_size;
@@ -381,7 +370,6 @@ U8 mem_sector_size(U8 lun)
   return sector_size;
 }
 
-
 bool mem_unload(U8 lun, bool unload)
 {
   bool unloaded;
@@ -433,7 +421,6 @@ bool mem_wr_protect(U8 lun)
   return wr_protect;
 }
 
-
 bool mem_removal(U8 lun)
 {
   bool removal;
@@ -458,7 +445,6 @@ bool mem_removal(U8 lun)
   return removal;
 }
 
-
 const char *mem_name(U8 lun)
 {
 #if MAX_LUN==0
@@ -475,17 +461,14 @@ const char *mem_name(U8 lun)
 #endif
 }
 
-
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -505,7 +488,6 @@ Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -525,19 +507,16 @@ Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
 {
   Ctrl_status status;
@@ -564,7 +543,6 @@ Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
   return status;
 }
 
-
 Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
 {
   Ctrl_status status;
@@ -591,19 +569,16 @@ Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface
  */
 //! @{
 
-
   #if ACCESS_MEM_TO_MEM == true
 
 #include "fat.h"
@@ -625,21 +600,18 @@ Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_ad
 
   #endif  // ACCESS_MEM_TO_MEM == true
 
-
 Ctrl_status stream_state(U8 id)
 {
   UNUSED(id);
   return CTRL_GOOD;
 }
 
-
 U16 stream_stop(U8 id)
 {
   UNUSED(id);
   return 0;
 }
 
-
 //! @}
 
 #endif // ACCESS_STREAM

Marlin/src/HAL/DUE/usb/ctrl_access.h

@@ -56,7 +56,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _CTRL_ACCESS_H_
 #define _CTRL_ACCESS_H_
 
@@ -89,7 +88,6 @@ typedef enum
   CTRL_BUSY       = FAIL + 2  //!< Memory not initialized or changed.
 } Ctrl_status;
 
-
 // FYI: Each Logical Unit Number (LUN) corresponds to a memory.
 
 // Check LUN defines.
@@ -136,7 +134,6 @@ typedef enum
 #define LUN_ID_USB      (MAX_LUN)           //!< First dynamic LUN (USB host mass storage).
 //! @}
 
-
 // Include LUN header files.
 #if LUN_0 == ENABLE
   #include LUN_0_INCLUDE
@@ -166,13 +163,11 @@ typedef enum
   #include LUN_USB_INCLUDE
 #endif
 
-
 // Check the configuration of write protection in conf_access.h.
 #ifndef GLOBAL_WR_PROTECT
   #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 
 //! Write protect.
@@ -180,7 +175,6 @@ extern bool g_wr_protect;
 
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
@@ -279,7 +273,6 @@ extern const char *mem_name(U8 lun);
 
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
@@ -310,7 +303,6 @@ extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
@@ -341,7 +333,6 @@ extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface

Marlin/src/HAL/DUE/usb/mrepeat.h

@@ -57,7 +57,6 @@
 
 #include "preprocessor.h"
 
-
 //! Maximal number of repetitions supported by MREPEAT.
 #define MREPEAT_LIMIT   256
 

Marlin/src/HAL/DUE/usb/osc.h

@@ -128,7 +128,6 @@ static inline void osc_enable(uint32_t ul_id) {
     pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
     break;
 
-
   case OSC_MAINCK_4M_RC:
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
     break;
@@ -141,7 +140,6 @@ static inline void osc_enable(uint32_t ul_id) {
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
     break;
 
-
   case OSC_MAINCK_XTAL:
     pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
       pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,

Marlin/src/HAL/DUE/usb/preprocessor.h

@@ -51,5 +51,4 @@
 #include "stringz.h"
 #include "mrepeat.h"
 
-
 #endif  // _PREPROCESSOR_H_

Marlin/src/HAL/DUE/usb/sbc_protocol.h

@@ -86,7 +86,6 @@ enum scsi_sbc_mode {
   SCSI_MS_MODE_CACHING = 0x08,    //!< Caching mode page
 };
 
-
 //! \name SBC-2 Device-Specific Parameter
 //@{
 #define SCSI_MS_SBC_WP              0x80    //!< Write Protected

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h

@@ -45,7 +45,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _SD_MMC_SPI_MEM_H_
 #define _SD_MMC_SPI_MEM_H_
 
@@ -63,17 +62,14 @@
   #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
 #endif
 
-
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #define   SD_MMC_REMOVED       0
 #define   SD_MMC_INSERTED      1
 #define   SD_MMC_REMOVING      2
 
-
 //---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
@@ -133,7 +129,6 @@ extern bool           sd_mmc_spi_wr_protect(void);
 //!
 extern bool           sd_mmc_spi_removal(void);
 
-
 //---- ACCESS DATA FUNCTIONS ----
 
 #if ACCESS_USB == true

Marlin/src/HAL/DUE/usb/sysclk.h

@@ -212,7 +212,6 @@ extern "C" {
   #define CONFIG_USBCLK_DIV
 #endif
 
-
 extern void sysclk_enable_usb(void);
 extern void sysclk_disable_usb(void);
 

Marlin/src/HAL/DUE/usb/udc.c

@@ -83,7 +83,6 @@ static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;
 
 //! @}
 
-
 //! \name Internal structure to store the USB device main strings
 //! @{
 

Marlin/src/HAL/DUE/usb/udc.h

@@ -685,6 +685,4 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
    } \endcode
  */
 
-
-
 #endif // _UDC_H_

Marlin/src/HAL/DUE/usb/udd.h

@@ -213,7 +213,6 @@ void udd_send_remotewakeup(void);
  */
 void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
 
-
 /**
  * \name Endpoint Management
  *

Marlin/src/HAL/DUE/usb/udi_cdc.c

@@ -457,7 +457,6 @@ void udi_cdc_data_sof_notify(void)
 #endif
 }
 
-
 // ------------------------
 //------- Internal routines to control serial line
 
@@ -520,7 +519,6 @@ static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
 	udi_cdc_ctrl_state_notify(port, ep_comm);
 }
 
-
 static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 {
 #if UDI_CDC_PORT_NB == 1 // To optimize code
@@ -542,7 +540,6 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 	}
 }
 
-
 static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -578,11 +575,9 @@ static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n,
 	udi_cdc_ctrl_state_notify(port, ep);
 }
 
-
 // ------------------------
 //------- Internal routines to process data transfer
 
-
 static bool udi_cdc_rx_start(uint8_t port)
 {
 	irqflags_t flags;
@@ -632,7 +627,6 @@ static bool udi_cdc_rx_start(uint8_t port)
 			udi_cdc_data_received);
 }
 
-
 static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t buf_sel_trans;
@@ -668,7 +662,6 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
 	udi_cdc_rx_start(port);
 }
 
-
 static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -700,7 +693,6 @@ static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t
 	udi_cdc_tx_send(port);
 }
 
-
 static void udi_cdc_tx_send(uint8_t port)
 {
 	irqflags_t flags;
@@ -780,11 +772,9 @@ static void udi_cdc_tx_send(uint8_t port)
 			udi_cdc_data_sent);
 }
 
-
 // ------------------------
 //------- Application interface
 
-
 //------- Application interface
 
 void udi_cdc_ctrl_signal_dcd(bool b_set)

Marlin/src/HAL/DUE/usb/udi_cdc.h

@@ -106,7 +106,6 @@ typedef struct {
   usb_ep_desc_t ep_notify;
 } udi_cdc_comm_desc_t;
 
-
 /**
  * \brief Data Class interface descriptor
  *
@@ -121,7 +120,6 @@ typedef struct {
   usb_ep_desc_t ep_out;
 } udi_cdc_data_desc_t;
 
-
 //! CDC communication endpoints size for all speeds
 #define UDI_CDC_COMM_EP_SIZE        64
 //! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)

Marlin/src/HAL/DUE/usb/udi_cdc_desc.c

@@ -109,7 +109,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED

Marlin/src/HAL/DUE/usb/udi_composite_desc.c

@@ -93,7 +93,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations        = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -147,7 +146,6 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
 };
 #endif
 
-
 /**
  * \name UDC structures which contains all USB Device definitions
  */

Marlin/src/HAL/DUE/usb/udi_msc.c

@@ -86,7 +86,6 @@ UDC_DESC_STORAGE udi_api_t udi_api_msc = {
 };
 //@}
 
-
 /**
  * \ingroup udi_msc_group
  * \defgroup udi_msc_group_internal Implementation of UDI MSC
@@ -137,7 +136,6 @@ volatile bool udi_msc_b_reset_trans = true;
 
 //@}
 
-
 /**
  * \name Internal routines
  */
@@ -190,7 +188,6 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
 static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
 //@}
 
-
 /**
  * \name Routines to process small data packet
  */
@@ -217,7 +214,6 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines to process CSW packet
  */
@@ -250,7 +246,6 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines manage sense data
  */
@@ -307,7 +302,6 @@ static void udi_msc_sense_fail_cdb_invalid(void);
 static void udi_msc_sense_command_invalid(void);
 //@}
 
-
 /**
  * \name Routines manage SCSI Commands
  */

Marlin/src/HAL/DUE/usb/uotghs_device_due.c

@@ -293,7 +293,6 @@ do { \
 # endif
 #endif
 
-
 /**
  * \name Power management routine.
  */
@@ -310,7 +309,6 @@ static bool udd_b_idle;
 //! State of sleep manager
 static bool udd_b_sleep_initialized = false;
 
-
 /*! \brief Authorize or not the CPU powerdown mode
  *
  * \param b_enable true to authorize idle mode
@@ -338,7 +336,6 @@ static void udd_sleep_mode(bool b_idle)
 
 //@}
 
-
 /**
  * \name Control endpoint low level management routine.
  *
@@ -410,7 +407,6 @@ static void udd_ctrl_send_zlp_out(void);
 //! \brief Call callback associated to setup request
 static void udd_ctrl_endofrequest(void);
 
-
 /**
  * \brief Main interrupt routine for control endpoint
  *
@@ -422,7 +418,6 @@ static bool udd_ctrl_interrupt(void);
 
 //@}
 
-
 /**
  * \name Management of bulk/interrupt/isochronous endpoints
  *
@@ -460,7 +455,6 @@ typedef struct {
 	uint8_t stall_requested:1;
 } udd_ep_job_t;
 
-
 //! Array to register a job on bulk/interrupt/isochronous endpoint
 static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
 
@@ -522,7 +516,6 @@ static bool udd_ep_interrupt(void);
 #endif // (0!=USB_DEVICE_MAX_EP)
 //@}
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS
 
@@ -671,13 +664,11 @@ udd_interrupt_sof_end:
 	return;
 }
 
-
 bool udd_include_vbus_monitoring(void)
 {
 	return true;
 }
 
-
 void udd_enable(void)
 {
 	irqflags_t flags;
@@ -764,7 +755,6 @@ void udd_enable(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_disable(void)
 {
 	irqflags_t flags;
@@ -866,7 +856,6 @@ void udd_attach(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_detach(void)
 {
 	otg_unfreeze_clock();
@@ -883,7 +872,6 @@ void udd_detach(void)
 	udd_sleep_mode(false);
 }
 
-
 bool udd_is_high_speed(void)
 {
 #ifdef USB_DEVICE_HS_SUPPORT
@@ -893,7 +881,6 @@ bool udd_is_high_speed(void)
 #endif
 }
 
-
 void udd_set_address(uint8_t address)
 {
 	udd_disable_address();
@@ -901,13 +888,11 @@ void udd_set_address(uint8_t address)
 	udd_enable_address();
 }
 
-
 uint8_t udd_getaddress(void)
 {
 	return udd_get_configured_address();
 }
 
-
 uint16_t udd_get_frame_number(void)
 {
 	return udd_frame_number();
@@ -930,14 +915,12 @@ void udd_send_remotewakeup(void)
 	}
 }
 
-
 void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
 {
 	udd_g_ctrlreq.payload = payload;
 	udd_g_ctrlreq.payload_size = payload_size;
 }
 
-
 #if (0 != USB_DEVICE_MAX_EP)
 bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 		uint16_t MaxEndpointSize)
@@ -1061,7 +1044,6 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 	return true;
 }
 
-
 void udd_ep_free(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1074,14 +1056,12 @@ void udd_ep_free(udd_ep_id_t ep)
 	udd_ep_job[ep_index - 1].stall_requested = false;
 }
 
-
 bool udd_ep_is_halted(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
 	return Is_udd_endpoint_stall_requested(ep_index);
 }
 
-
 bool udd_ep_set_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1122,7 +1102,6 @@ bool udd_ep_set_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_clear_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1163,7 +1142,6 @@ bool udd_ep_clear_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 		uint8_t * buf, iram_size_t buf_size,
 		udd_callback_trans_t callback)
@@ -1230,7 +1208,6 @@ bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 #endif
 }
 
-
 void udd_ep_abort(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1259,7 +1236,6 @@ void udd_ep_abort(udd_ep_id_t ep)
 	udd_ep_abort_job(ep);
 }
 
-
 bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 		udd_callback_halt_cleared_t callback)
 {
@@ -1294,7 +1270,6 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 }
 #endif // (0 != USB_DEVICE_MAX_EP)
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 
 void udd_test_mode_j(void)
@@ -1303,20 +1278,17 @@ void udd_test_mode_j(void)
 	udd_enable_hs_test_mode_j();
 }
 
-
 void udd_test_mode_k(void)
 {
 	udd_enable_hs_test_mode();
 	udd_enable_hs_test_mode_k();
 }
 
-
 void udd_test_mode_se0_nak(void)
 {
 	udd_enable_hs_test_mode();
 }
 
-
 void udd_test_mode_packet(void)
 {
 	uint8_t i;
@@ -1360,8 +1332,6 @@ void udd_test_mode_packet(void)
 }
 #endif // USB_DEVICE_HS_SUPPORT
 
-
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
 
@@ -1411,7 +1381,6 @@ static void udd_ctrl_init(void)
 	udd_ep_control_state = UDD_EPCTRL_SETUP;
 }
 
-
 static void udd_ctrl_setup_received(void)
 {
 	irqflags_t flags;
@@ -1473,7 +1442,6 @@ static void udd_ctrl_setup_received(void)
 	}
 }
 
-
 static void udd_ctrl_in_sent(void)
 {
 	static bool b_shortpacket = false;
@@ -1557,7 +1525,6 @@ static void udd_ctrl_in_sent(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_out_received(void)
 {
 	irqflags_t flags;
@@ -1648,7 +1615,6 @@ static void udd_ctrl_out_received(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_underflow(void)
 {
 	if (Is_udd_out_received(0))
@@ -1665,7 +1631,6 @@ static void udd_ctrl_underflow(void)
 	}
 }
 
-
 static void udd_ctrl_overflow(void)
 {
 	if (Is_udd_in_send(0))
@@ -1681,7 +1646,6 @@ static void udd_ctrl_overflow(void)
 	}
 }
 
-
 static void udd_ctrl_stall_data(void)
 {
 	// Stall all packets on IN & OUT control endpoint
@@ -1689,7 +1653,6 @@ static void udd_ctrl_stall_data(void)
 	udd_enable_stall_handshake(0);
 }
 
-
 static void udd_ctrl_send_zlp_in(void)
 {
 	irqflags_t flags;
@@ -1707,7 +1670,6 @@ static void udd_ctrl_send_zlp_in(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_send_zlp_out(void)
 {
 	irqflags_t flags;
@@ -1723,7 +1685,6 @@ static void udd_ctrl_send_zlp_out(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_endofrequest(void)
 {
 	// If a callback is registered then call it
@@ -1732,7 +1693,6 @@ static void udd_ctrl_endofrequest(void)
 	}
 }
 
-
 static bool udd_ctrl_interrupt(void)
 {
 
@@ -1783,7 +1743,6 @@ static bool udd_ctrl_interrupt(void)
 	return false;
 }
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS
 
@@ -1798,7 +1757,6 @@ static void udd_ep_job_table_reset(void)
 	}
 }
 
-
 static void udd_ep_job_table_kill(void)
 {
 	uint8_t i;
@@ -1809,7 +1767,6 @@ static void udd_ep_job_table_kill(void)
 	}
 }
 
-
 static void udd_ep_abort_job(udd_ep_id_t ep)
 {
 	ep &= USB_EP_ADDR_MASK;
@@ -1818,7 +1775,6 @@ static void udd_ep_abort_job(udd_ep_id_t ep)
 	udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
 }
 
-
 static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
 {
 	if (ptr_job->busy == false) {
@@ -1889,7 +1845,6 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
 		udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
 				UOTGHS_DEVDMACONTROL_CHANN_ENB;
 
-
 		// Disable IRQs to have a short sequence
 		// between read of EOT_STA and DMA enable
 		flags = cpu_irq_save();

Marlin/src/HAL/DUE/usb/uotghs_device_due.h

@@ -129,7 +129,6 @@ extern "C" {
 #define Is_udd_vbus_transition()          (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
 //! @}
 
-
 //! @name UOTGHS device attach control
 //! These macros manage the UOTGHS Device attach.
 //! @{
@@ -141,7 +140,6 @@ extern "C" {
 #define Is_udd_detached()                 (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
 //! @}
 
-
 //! @name UOTGHS device bus events control
 //! These macros manage the UOTGHS Device bus events.
 //! @{
@@ -246,7 +244,6 @@ extern "C" {
 #define udd_get_configured_address()              (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
 //! @}
 
-
 //! @name UOTGHS Device endpoint drivers
 //! These macros manage the common features of the endpoints.
 //! @{
@@ -330,7 +327,6 @@ extern "C" {
 #define udd_data_toggle(ep)                       (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
 //! @}
 
-
 //! @name UOTGHS Device control endpoint
 //! These macros control the endpoints.
 //! @{
@@ -530,7 +526,6 @@ extern "C" {
   //! Tests if IN sending interrupt is enabled
 #define Is_udd_in_send_interrupt_enabled(ep)      (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
 
-
   //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
   //! @param ep Endpoint of which to access FIFO data register
   //! @param scale Data scale in bits: 64, 32, 16 or 8
@@ -652,7 +647,6 @@ typedef struct {
 //! @}
 //! @}
 
-
 /// @cond 0
 /**INDENT-OFF**/
 #ifdef __cplusplus

Marlin/src/HAL/DUE/usb/uotghs_otg.h

@@ -53,7 +53,6 @@
 extern "C" {
 #endif
 
-
 //! \ingroup usb_group
 //! \defgroup otg_group UOTGHS OTG Driver
 //! UOTGHS low-level driver for OTG features
@@ -74,7 +73,6 @@ bool otg_dual_enable(void);
  */
 void otg_dual_disable(void);
 
-
 //! @name UOTGHS OTG ID pin management
 //! The ID pin come from the USB OTG connector (A and B receptable) and
 //! allows to select the USB mode host or device.

Marlin/src/HAL/DUE/usb/usb_protocol.h

@@ -374,7 +374,6 @@ typedef struct {
   uint8_t bNumDeviceCaps;
 } usb_dev_bos_desc_t;
 
-
 /**
  * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
  *
@@ -411,7 +410,6 @@ typedef struct {
   uint8_t iFunction;        //!< Index of string descriptor
 } usb_association_desc_t;
 
-
 /**
  * \brief Standard USB configuration descriptor structure
  */
@@ -426,7 +424,6 @@ typedef struct {
   uint8_t bMaxPower;
 } usb_conf_desc_t;
 
-
 #define  USB_CONFIG_ATTR_MUST_SET         (1 << 7) //!< Must always be set
 #define  USB_CONFIG_ATTR_BUS_POWERED      (0 << 6) //!< Bus-powered
 #define  USB_CONFIG_ATTR_SELF_POWERED     (1 << 6) //!< Self-powered
@@ -475,7 +472,6 @@ typedef struct {
   uint8_t bInterval;
 } usb_ep_desc_t;
 
-
 /**
  * \brief A standard USB string descriptor structure
  */

Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h

@@ -168,7 +168,6 @@ COMPILER_PACK_SET(1)
 //! \name USB CDC Descriptors
 //@{
 
-
 //! CDC Header Functional Descriptor
 typedef struct {
   uint8_t bFunctionLength;
@@ -203,7 +202,6 @@ typedef struct {
   uint8_t bSlaveInterface0;
 } usb_cdc_union_desc_t;
 
-
 //! \name USB CDC Call Management Capabilities
 //@{
 //! Device handles call management itself
@@ -278,7 +276,6 @@ typedef struct {
 //@}
 //@}
 
-
 //! \name USB CDC notification message
 //@{
 

Marlin/src/HAL/DUE/usb/usb_protocol_msc.h

@@ -47,7 +47,6 @@
 #ifndef _USB_PROTOCOL_MSC_H_
 #define _USB_PROTOCOL_MSC_H_
 
-
 /**
  * \ingroup usb_protocol_group
  * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
@@ -89,7 +88,6 @@
 #define MSC_PROTOCOL_BULK           0x50  //!< Bulk-only
 //@}
 
-
 /**
  * \brief MSC USB requests (bRequest)
  */
@@ -98,7 +96,6 @@ enum usb_reqid_msc {
   USB_REQ_MSC_GET_MAX_LUN = 0xFE  //!< Get Max LUN
 };
 
-
 COMPILER_PACK_SET(1)
 
 /**
@@ -122,7 +119,6 @@ struct usb_msc_cbw {
 #define USB_CBW_LEN_MASK            0x1F  //!< Valid bits in bCBWCBLength
 //@}
 
-
 /**
  * \name A Command Status Wrapper (CSW).
  */

Marlin/src/HAL/ESP32/eeprom.cpp

@@ -31,24 +31,28 @@
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start()  { return EEPROM.begin(MARLIN_EEPROM_SIZE); }
 bool PersistentStore::access_finish() { EEPROM.end(); return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   for (size_t i = 0; i < size; i++) {
-    EEPROM.write(pos++, value[i]);
+    const int p = REAL_EEPROM_ADDR(pos);
+    EEPROM.write(p, value[i]);
     crc16(crc, &value[i], 1);
+    ++pos;
   }
   return false;
 }
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   for (size_t i = 0; i < size; i++) {
-    uint8_t c = EEPROM.read(pos++);
+    const int p = REAL_EEPROM_ADDR(pos);
+    uint8_t c = EEPROM.read(p);
     if (writing) value[i] = c;
     crc16(crc, &c, 1);
+    ++pos;
   }
   return false;
 }

Marlin/src/HAL/ESP32/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HC32/MarlinHAL.cpp

@@ -123,6 +123,11 @@ void MarlinHAL::init() {
 
   // Register min serial
   TERN_(POSTMORTEM_DEBUGGING, install_min_serial());
+
+  // warn if low memory after init
+  if (freeMemory() < 1024) {
+    SERIAL_WARN_MSG("HAL: low memory after init!\n");
+  }
 }
 
 void MarlinHAL::init_board() {}
@@ -147,7 +152,31 @@ void MarlinHAL::delay_ms(const int ms) {
   delay(ms);
 }
 
-void MarlinHAL::idletask() {}
+void MarlinHAL::idletask() {
+  #if ENABLED(MARLIN_DEV_MODE)
+    // check & print serial RX errors
+    MSerialT *serials[] = { &MSerial1, &MSerial2 };
+    for (int serial = 0; serial < 2; serial++) {
+      usart_receive_error_t err = serials[serial]->getReceiveError();
+      if (err != usart_receive_error_t::None) {
+        // "Warning: MSerial[n] RX [Framing|Parity|Overrun] Error"
+        SERIAL_WARN_START();
+        SERIAL_ECHOPGM(" MSerial");
+        SERIAL_ECHO(serial + 1);
+        SERIAL_ECHOPGM(" RX ");
+        switch(err) {
+          case usart_receive_error_t::FramingError: SERIAL_ECHOPGM("Framing"); break;
+          case usart_receive_error_t::ParityError:  SERIAL_ECHOPGM("Parity");  break;
+          case usart_receive_error_t::OverrunError: SERIAL_ECHOPGM("Overrun"); break;
+          case usart_receive_error_t::RxDataDropped: SERIAL_ECHOPGM("DataDropped"); break;
+          default: break;
+        }
+        SERIAL_ECHOPGM(" Error");
+        SERIAL_EOL();
+      }
+    }
+  #endif
+}
 
 uint8_t MarlinHAL::get_reset_source() {
   // Query reset cause from RMU

Marlin/src/HAL/HC32/MarlinSerial.cpp

@@ -27,7 +27,7 @@
 
 /**
  * Not every MarlinSerial instance should handle emergency parsing, as
- * it would not make sense to parse GCode from TMC responses
+ * it would not make sense to parse G-Code from TMC responses
  */
 constexpr bool serial_handles_emergency(int port) {
   return false
@@ -46,14 +46,34 @@ constexpr bool serial_handles_emergency(int port) {
 //
 // Define serial ports
 //
-#define DEFINE_HWSERIAL_MARLIN(name, n)      \
+
+// serial port where RX and TX use IRQs
+#define DEFINE_IRQ_SERIAL_MARLIN(name, n)      \
   MSerialT name(serial_handles_emergency(n), \
                 &USART##n##_config,          \
                 BOARD_USART##n##_TX_PIN,     \
                 BOARD_USART##n##_RX_PIN);
 
-DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
+// serial port where RX uses DMA and TX uses IRQs
-DEFINE_HWSERIAL_MARLIN(MSerial2, 2);
+// all serial ports use DMA1
+// since there are 4 USARTs and 4 DMA channels, we can use the USART number as the DMA channel
+#define DEFINE_DMA_SERIAL_MARLIN(name, n)      \
+  MSerialT name(serial_handles_emergency(n), \
+                &USART##n##_config,          \
+                BOARD_USART##n##_TX_PIN,     \
+                BOARD_USART##n##_RX_PIN,     \
+                M4_DMA1,                     \
+                ((en_dma_channel_t)(n - 1))); // map USART1 to DMA channel 0, USART2 to DMA channel 1, etc.
+
+#define DEFINE_SERIAL_MARLIN(name, n) TERN(SERIAL_DMA, DEFINE_DMA_SERIAL_MARLIN(name, n), DEFINE_IRQ_SERIAL_MARLIN(name, n))
+
+DEFINE_SERIAL_MARLIN(MSerial1, 1);
+DEFINE_SERIAL_MARLIN(MSerial2, 2);
+
+// TODO: remove this warning when SERIAL_DMA has been tested some more
+#if ENABLED(SERIAL_DMA)
+  #warning "SERIAL_DMA may be unstable on HC32F460."
+#endif
 
 //
 // Serial port assertions

Marlin/src/HAL/HC32/MarlinSerial.h

@@ -25,17 +25,42 @@
 #include <drivers/usart/Usart.h>
 
 // Optionally set uart IRQ priority to reduce overflow errors
-// #define UART_IRQ_PRIO 1
+//#define UART_RX_IRQ_PRIO 1
+//#define UART_TX_IRQ_PRIO 1
+//#define UART_RX_DMA_IRQ_PRIO 1
 
 struct MarlinSerial : public Usart {
-  MarlinSerial(struct usart_config_t *usart_device, gpio_pin_t tx_pin, gpio_pin_t rx_pin) : Usart(usart_device, tx_pin, rx_pin) {}
+  MarlinSerial(
+    struct usart_config_t *usart_device, 
+    gpio_pin_t tx_pin, 
+    gpio_pin_t rx_pin
+    #if ENABLED(SERIAL_DMA)
+    , M4_DMA_TypeDef *dma_unit = nullptr,
+    en_dma_channel_t rx_dma_channel = DmaCh0
+    #endif
+  ) : Usart(usart_device, tx_pin, rx_pin) {
+    #if ENABLED(SERIAL_DMA)
+      if (dma_unit != nullptr) {
+        enableRxDma(dma_unit, rx_dma_channel);
+      }
+    #endif
+  }
 
-  #ifdef UART_IRQ_PRIO
+  #if defined(UART_RX_IRQ_PRIO) || defined(UART_TX_IRQ_PRIO) || defined(UART_RX_DMA_IRQ_PRIO)
     void setPriority() {
-      NVIC_SetPriority(c_dev()->interrupts.rx_data_available.interrupt_number, UART_IRQ_PRIO);
+      #if defined(UART_RX_IRQ_PRIO)
-      NVIC_SetPriority(c_dev()->interrupts.rx_error.interrupt_number, UART_IRQ_PRIO);
+        NVIC_SetPriority(c_dev()->interrupts.rx_data_available.interrupt_number, UART_RX_IRQ_PRIO);
-      NVIC_SetPriority(c_dev()->interrupts.tx_buffer_empty.interrupt_number, UART_IRQ_PRIO);
+        NVIC_SetPriority(c_dev()->interrupts.rx_error.interrupt_number, UART_RX_IRQ_PRIO);
-      NVIC_SetPriority(c_dev()->interrupts.tx_complete.interrupt_number, UART_IRQ_PRIO);
+      #endif
+
+      #if defined(UART_TX_IRQ_PRIO)
+        NVIC_SetPriority(c_dev()->interrupts.tx_buffer_empty.interrupt_number, UART_TX_IRQ_PRIO);
+        NVIC_SetPriority(c_dev()->interrupts.tx_complete.interrupt_number, UART_TX_IRQ_PRIO);
+      #endif
+
+      #if defined(UART_RX_DMA_IRQ_PRIO) && ENABLED(SERIAL_DMA)
+        NVIC_SetPriority(c_dev()->dma.rx.rx_data_available_dma_btc.interrupt_number, UART_RX_DMA_IRQ_PRIO);
+      #endif
     }
 
     void begin(uint32_t baud) {
@@ -47,7 +72,12 @@ struct MarlinSerial : public Usart {
       Usart::begin(baud, config);
       setPriority();
     }
-  #endif
+
+    void begin(uint32_t baud, const stc_usart_uart_init_t *config, const bool rxNoiseFilter = true) {
+      Usart::begin(baud, config, rxNoiseFilter);
+      setPriority();
+    }
+  #endif // UART_RX_IRQ_PRIO || UART_TX_IRQ_PRIO || UART_RX_DMA_IRQ_PRIO
 };
 
 typedef Serial1Class<MarlinSerial> MSerialT;

Marlin/src/HAL/HC32/app_config.h

@@ -0,0 +1,70 @@
+/**
+ * app_config.h is included by the hc32f460 arduino build script for every source file.
+ * it is used to configure the arduino core (and ddl) automatically according 
+ * to the settings in Configuration.h and Configuration_adv.h.
+ */
+#pragma once
+#ifndef _HC32_APP_CONFIG_H_
+#define _HC32_APP_CONFIG_H_
+
+#include "../../inc/MarlinConfigPre.h"
+
+//
+// dev mode
+//
+#if ENABLED(MARLIN_DEV_MODE)
+  #define __DEBUG 1
+  #define __CORE_DEBUG 1
+#endif
+
+//
+// Fault Handlers and Panic
+//
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  // disable arduino core fault handler, as we define our own
+  #define CORE_DISABLE_FAULT_HANDLER 1
+#endif
+
+// force-enable panic handler so that we can use our custom one (in MinSerial)
+#define PANIC_ENABLE 1
+
+// use short filenames in ddl debug and core panic output
+#define __DEBUG_SHORT_FILENAMES 1
+#define __PANIC_SHORT_FILENAMES 1
+
+// omit panic messages in core panic output
+#define __OMIT_PANIC_MESSAGE 1
+
+//
+// Usart
+//
+
+// disable serial globals (Serial1, Serial2, ...), as we define our own
+#define DISABLE_SERIAL_GLOBALS 1
+
+// increase the size of the Usart buffers (both RX and TX)
+// NOTE: 
+// the heap usage will increase by (SERIAL_BUFFER_SIZE - 64) * "number of serial ports used"
+// if running out of heap, the system may become unstable
+//#define SERIAL_BUFFER_SIZE 256
+
+// enable support for Usart Clock Divider / Oversampling auto config
+#define USART_AUTO_CLKDIV_OS_CONFIG 1
+
+// enable USART_RX_DMA_SUPPORT core option when SERIAL_DMA is enabled
+#if ENABLED(SERIAL_DMA)
+  #define USART_RX_DMA_SUPPORT 1
+#endif
+
+//
+// Misc.
+//
+
+// redirect printf to host serial
+#define REDIRECT_PRINTF_TO_SERIAL 1
+
+// FIXME override F_CPU to PCLK1, as marlin freaks out otherwise
+#define F_CPU (SYSTEM_CLOCK_FREQUENCIES.pclk1)
+
+#endif // _HC32_APP_CONFIG_H_

Marlin/src/HAL/HC32/eeprom_bl24cxx.cpp

@@ -37,7 +37,7 @@
   #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
 #endif
 
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start() {
   eeprom_init();
@@ -49,7 +49,7 @@ bool PersistentStore::access_finish() { return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
     uint8_t v = *value;
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
 
     // EEPROM has only ~100,000 write cycles,
     // so only write bytes that have changed!
@@ -70,16 +70,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size,
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
-                                uint16_t *crc, const bool writing /*=true*/) {
   do {
-    uint8_t *const p = (uint8_t *const)pos;
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
-    uint8_t c = eeprom_read_byte(p);
+    if (writing) *value = c;
-    if (writing)
-    {
-      *value = c;
-    }
-
     crc16(crc, &c, 1);
     pos++;
     value++;

Marlin/src/HAL/HC32/eeprom_sdcard.cpp

@@ -38,9 +38,7 @@
   #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
 
-size_t PersistentStore::capacity() {
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
-  return MARLIN_EEPROM_SIZE;
-}
 
 #define _ALIGN(x) __attribute__((aligned(x)))
 static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
@@ -85,11 +83,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing /*=true*/) {
   for (size_t i = 0; i < size; i++) {
-    uint8_t c = HAL_eeprom_data[pos + i];
+    const uint8_t c = HAL_eeprom_data[pos + i];
     if (writing) value[i] = c;
     crc16(crc, &c, 1);
   }
-
   pos += size;
   return false;
 }

Marlin/src/HAL/HC32/eeprom_wired.cpp

@@ -35,7 +35,7 @@
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_finish() { return true; }
 
@@ -56,7 +56,7 @@ bool PersistentStore::access_start() {
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     uint8_t v = *value;
     // EEPROM has only ~100,000 write cycles,
     // so only write bytes that have changed!
@@ -77,10 +77,8 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
   do {
-    uint8_t c = eeprom_read_byte((uint8_t *)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t *)REAL_EEPROM_ADDR(pos));
-    if (writing && value) {
+    if (writing && value) *value = c;
-      *value = c;
-    }
 
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/HC32/endstop_interrupts.cpp

@@ -40,9 +40,15 @@ void endstopIRQHandler() {
   CHECK(X_MAX);
   CHECK(X_MIN);
 
+  CHECK(X2_MAX);
+  CHECK(X2_MIN);
+
   CHECK(Y_MAX);
   CHECK(Y_MIN);
 
+  CHECK(Y2_MAX);
+  CHECK(Y2_MIN);
+
   CHECK(Z_MAX);
   CHECK(Z_MIN);
 
@@ -52,6 +58,9 @@ void endstopIRQHandler() {
   CHECK(Z3_MAX);
   CHECK(Z3_MIN);
 
+  CHECK(Z4_MAX);
+  CHECK(Z4_MIN);
+
   CHECK(Z_MIN_PROBE);
 
   // Update endstops
@@ -69,9 +78,15 @@ void setup_endstop_interrupts() {
   SETUP(X_MAX);
   SETUP(X_MIN);
 
+  SETUP(X2_MAX);
+  SETUP(X2_MIN);
+
   SETUP(Y_MAX);
   SETUP(Y_MIN);
 
+  SETUP(Y2_MAX);
+  SETUP(Y2_MIN);
+
   SETUP(Z_MAX);
   SETUP(Z_MIN);
 
@@ -81,6 +96,9 @@ void setup_endstop_interrupts() {
   SETUP(Z3_MAX);
   SETUP(Z3_MIN);
 
+  SETUP(Z4_MAX);
+  SETUP(Z4_MIN);
+
   SETUP(Z_MIN_PROBE);
 
   #undef SETUP
@@ -88,7 +106,7 @@ void setup_endstop_interrupts() {
 
 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_Y_MAX, USE_Y_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
   #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0

Marlin/src/HAL/HC32/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/HC32/inc/SanityCheck.h

@@ -20,6 +20,20 @@
  *
  */
 #pragma once
+#include <core_util.h>
+
+#if !defined(ARDUINO_CORE_VERSION_INT) || !defined(GET_VERSION_INT)
+  // version macros were introduced in arduino core version 1.1.0
+  // below that version, we polyfill them
+  #define GET_VERSION_INT(major, minor, patch) ((major * 100000) + (minor * 1000) + patch)
+  #define ARDUINO_CORE_VERSION_INT GET_VERSION_INT(1, 0, 0)
+#endif
+
+#if ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 1, 0)
+  // because we use app_config.h introduced in arduino core version 1.1.0, the 
+  // HAL is not compatible with older versions
+  #error "The HC32 HAL is not compatible with Arduino Core versions < 1.1.0. Consider updating the Arduino Core."
+#endif
 
 #ifndef BOARD_XTAL_FREQUENCY
   #error "BOARD_XTAL_FREQUENCY is required for HC32F460."
@@ -58,11 +72,9 @@
 #endif
 
 #if TEMP_SENSOR_SOC
-  #if !defined(TEMP_SOC_PIN)
+  #ifndef TEMP_SOC_PIN
     #error "TEMP_SOC_PIN must be defined to use TEMP_SENSOR_SOC."
-  #endif
+  #elif IS_GPIO_PIN(TEMP_SOC_PIN)
-
-  #if defined(TEMP_SOC_PIN) && IS_GPIO_PIN(TEMP_SOC_PIN)
     #error "TEMP_SOC_PIN must not be a valid GPIO pin to avoid conflicts."
   #endif
 #endif
@@ -76,3 +88,18 @@
     #error "HC32 HAL uses a custom panic handler. Do not define PANIC_USARTx_TX_PIN."
   #endif
 #endif
+
+#if ENABLED(SERIAL_DMA)
+  #if !defined(USART_RX_DMA_SUPPORT)
+    #error "SERIAL_DMA requires USART_RX_DMA_SUPPORT to be enabled in the arduino core."
+  #endif
+
+  // USART_RX_DMA_SUPPORT does not implement core_hook_usart_rx_irq, which is required for the emergency parser
+  #if ENABLED(EMERGENCY_PARSER)
+    #error "EMERGENCY_PARSER is not supported with SERIAL_DMA. Please disable either SERIAL_DMA or EMERGENCY_PARSER."
+  #endif
+
+  #if ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 1, 0)
+    #error "SERIAL_DMA is not supported with arduino core version < 1.1.0."
+  #endif
+#endif

Marlin/src/HAL/HC32/printf_retarget.cpp

@@ -23,7 +23,7 @@
 #ifdef ARDUINO_ARCH_HC32
 #ifdef REDIRECT_PRINTF_TO_SERIAL
 
-#if !defined(__GNUC__)
+#ifndef __GNUC__
   #error "only GCC is supported"
 #endif
 

Marlin/src/HAL/HC32/sdio.cpp

@@ -54,7 +54,7 @@
     fn                                              \
   }
 
-stc_sd_handle_t *handle;
+stc_sd_handle_t *handle = nullptr;
 
 bool SDIO_Init() {
   // Configure SDIO pins
@@ -66,36 +66,45 @@ bool SDIO_Init() {
   GPIO_SetFunc(BOARD_SDIO_CMD, Func_Sdio);
   GPIO_SetFunc(BOARD_SDIO_DET, Func_Sdio);
 
+  // If a handle is already initialized, free it before creating a new one
+  // otherwise, we will leak memory, which will eventually crash the system
+  if (handle != nullptr) {
+    delete handle->pstcDmaInitCfg;
+    delete handle->pstcCardInitCfg;
+    delete handle;
+    handle = nullptr;
+  }
+
   // Create DMA configuration
   stc_sdcard_dma_init_t *dmaConf = new stc_sdcard_dma_init_t;
   dmaConf->DMAx = SDIO_DMA_PERIPHERAL;
   dmaConf->enDmaCh = SDIO_DMA_CHANNEL;
 
+  // Create card configuration
+  // This should be a fairly safe configuration for most cards
+  stc_sdcard_init_t *cardConf = new stc_sdcard_init_t;
+  cardConf->enBusWidth = SdiocBusWidth4Bit;
+  cardConf->enClkFreq = SdiocClk400K;
+  cardConf->enSpeedMode = SdiocNormalSpeedMode;
+  cardConf->pstcInitCfg = nullptr;
+
   // Create handle in DMA mode
   handle = new stc_sd_handle_t;
   handle->SDIOCx = SDIO_PERIPHERAL;
   handle->enDevMode = SdCardDmaMode;
   handle->pstcDmaInitCfg = dmaConf;
-
+  //handle->pstcCardInitCfg = cardConf; // assigned in SDCARD_Init
-  // Create card configuration
-  // This should be a fairly safe configuration for most cards
-  stc_sdcard_init_t cardConf = {
-    .enBusWidth = SdiocBusWidth4Bit,
-    .enClkFreq = SdiocClk400K,
-    .enSpeedMode = SdiocNormalSpeedMode,
-    //.pstcInitCfg = NULL,
-  };
 
   // Initialize sd card
-  en_result_t rc = SDCARD_Init(handle, &cardConf);
+  en_result_t rc = SDCARD_Init(handle, cardConf);
   if (rc != Ok) printf("SDIO_Init() error (rc=%u)\n", rc);
 
   return rc == Ok;
 }
 
 bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
-  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
-  CORE_ASSERT(dst != NULL, "SDIO_ReadBlock dst is NULL");
+  CORE_ASSERT(dst != nullptr, "SDIO_ReadBlock dst is NULL", return false);
 
   WITH_RETRY(SDIO_READ_RETRIES, {
     en_result_t rc = SDCARD_ReadBlocks(handle, block, 1, dst, SDIO_READ_TIMEOUT);
@@ -107,8 +116,8 @@ bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
 }
 
 bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
-  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
-  CORE_ASSERT(src != NULL, "SDIO_WriteBlock src is NULL");
+  CORE_ASSERT(src != nullptr, "SDIO_WriteBlock src is NULL", return false);
 
   WITH_RETRY(SDIO_WRITE_RETRIES, {
     en_result_t rc = SDCARD_WriteBlocks(handle, block, 1, (uint8_t *)src, SDIO_WRITE_TIMEOUT);
@@ -120,12 +129,12 @@ bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
 }
 
 bool SDIO_IsReady() {
-  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
   return bool(handle->stcCardStatus.READY_FOR_DATA);
 }
 
 uint32_t SDIO_GetCardSize() {
-  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return 0);
 
   // Multiply number of blocks with block size to get size in bytes
   const uint64_t cardSizeBytes = uint64_t(handle->stcSdCardInfo.u32LogBlockNbr) * uint64_t(handle->stcSdCardInfo.u32LogBlockSize);

Marlin/src/HAL/LINUX/eeprom.cpp

@@ -35,7 +35,7 @@
 uint8_t buffer[MARLIN_EEPROM_SIZE];
 char filename[] = "eeprom.dat";
 
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start() {
   const char eeprom_erase_value = 0xFF;

Marlin/src/HAL/LINUX/hardware/Timer.cpp

@@ -37,7 +37,10 @@ Timer::Timer() {
 }
 
 Timer::~Timer() {
-  timer_delete(timerid);
+  if (timerid != 0) {
+    timer_delete(timerid);
+    timerid = 0;
+  }
 }
 
 void Timer::init(uint32_t sig_id, uint32_t sim_freq, callback_fn* fn) {

Marlin/src/HAL/LINUX/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/LINUX/main.cpp

@@ -21,6 +21,7 @@
  */
 
 #ifdef __PLAT_LINUX__
+#ifndef UNIT_TEST
 
 //#define GPIO_LOGGING // Full GPIO and Positional Logging
 
@@ -135,4 +136,5 @@ int main() {
   read_serial.join();
 }
 
+#endif // UNIT_TEST
 #endif // __PLAT_LINUX__

Marlin/src/HAL/LINUX/servo_private.h

@@ -60,7 +60,6 @@
 
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 
-
 // Types
 
 typedef struct {

Marlin/src/HAL/LINUX/spi_pins.h

@@ -21,9 +21,6 @@
  */
 #pragma once
 
-#include "../../core/macros.h"
-#include "../../inc/MarlinConfigPre.h"
-
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
   #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                         // needed due to the speed and mode required for communicating with each device being different.

Marlin/src/HAL/LPC1768/HAL.cpp

@@ -111,6 +111,12 @@ void MarlinHAL::init() {
   #if HAS_SERVO_3
     INIT_SERVO(3);
   #endif
+  #if HAS_SERVO_4
+    INIT_SERVO(4);
+  #endif
+  #if HAS_SERVO_5
+    INIT_SERVO(5);
+  #endif
 
   //debug_frmwrk_init();
   //_DBG("\n\nDebug running\n");

Marlin/src/HAL/LPC1768/HAL.h

@@ -100,7 +100,7 @@ extern DefaultSerial1 USBSerial;
   #else
     #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
-  #if HAS_DGUS_LCD
+  #if HAS_DGUS_LCD || ENABLED(DWINOS_4)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
   #endif
 #endif

Marlin/src/HAL/LPC1768/eeprom_flash.cpp

@@ -61,7 +61,7 @@ static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
 static bool eeprom_dirty = false;
 static int current_slot = 0;
 
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start() {
   uint32_t first_nblank_loc, first_nblank_val;
@@ -112,7 +112,8 @@ bool PersistentStore::access_finish() {
 }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  for (size_t i = 0; i < size; i++) ram_eeprom[pos + i] = value[i];
+  const int p = REAL_EEPROM_ADDR(pos);
+  for (size_t i = 0; i < size; i++) ram_eeprom[p + i] = value[i];
   eeprom_dirty = true;
   crc16(crc, value, size);
   pos += size;
@@ -120,8 +121,9 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 }
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  const int p = REAL_EEPROM_ADDR(pos);
   const uint8_t * const buff = writing ? &value[0] : &ram_eeprom[pos];
-  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[pos + i];
+  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[p + i];
   crc16(crc, buff, size);
   pos += size;
   return false;  // return true for any error

Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp

@@ -49,7 +49,7 @@ bool eeprom_file_open = false;
   #define MARLIN_EEPROM_SIZE size_t(0x1000) // 4KiB of Emulated EEPROM
 #endif
 
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start() {
   const char eeprom_erase_value = 0xFF;

Marlin/src/HAL/LPC1768/eeprom_wired.cpp

@@ -36,7 +36,7 @@
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE           0x8000 // 32K
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -45,7 +45,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   uint16_t written = 0;
   while (size--) {
     uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
       if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -64,7 +64,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     // Read from external EEPROM
-    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/LPC1768/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/LPC1768/spi_pins.h

@@ -21,9 +21,7 @@
  */
 #pragma once
 
-#include "../../core/macros.h"
+#if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
-
-#if ALL(HAS_MEDIA, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
   #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                         // needed due to the speed and mode required for communicating with each device being different.
                         // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LPC1768/win_usb_driver/lpc176x_usb_driver.inf

@@ -8,14 +8,12 @@ DriverVer =04/14/2008, 5.1.2600.5512
 [Manufacturer]
 %PROVIDER%=DeviceList,ntamd64
 
-
 [DeviceList]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 
 [DeviceList.ntamd64]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 
-
 [LPC1768USB]
 include=mdmcpq.inf
 CopyFiles=FakeModemCopyFileSection
@@ -28,7 +26,6 @@ AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 [SerialPropPageAddReg]
 HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
 
-
 [Strings]
 PROVIDER   = "marlinfw.org"
 DRIVER.SVC = "Marlin USB Driver"

Marlin/src/HAL/NATIVE_SIM/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/NATIVE_SIM/servo_private.h

@@ -61,7 +61,6 @@
 
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 
-
 // Types
 
 typedef struct {

Marlin/src/HAL/NATIVE_SIM/spi_pins.h

@@ -21,9 +21,6 @@
  */
 #pragma once
 
-#include "../../core/macros.h"
-#include "../../inc/MarlinConfigPre.h"
-
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
   #define SOFTWARE_SPI      // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.

Marlin/src/HAL/NATIVE_SIM/u8g/LCD_pin_routines.h

@@ -31,7 +31,6 @@
  * resulted in using about about 25% of the CPU's time.
  */
 
-
 #ifdef __cplusplus
   extern "C" {
 #endif

Marlin/src/HAL/SAMD21/HAL.cpp

@@ -40,8 +40,6 @@
   DefaultSerial3 MSerial2(false, Serial2);
 #endif
 
-
-
 #define WDT_CONFIG_PER_7_Val 0x9u
 #define WDT_CONFIG_PER_Pos 0
 #define WDT_CONFIG_PER_7 (WDT_CONFIG_PER_7_Val << WDT_CONFIG_PER_Pos)
@@ -165,7 +163,6 @@ void MarlinHAL::adc_init() {
   ADC->REFCTRL.reg = ADC_REFCTRL_REFSEL_INTVCC1;
   ADC->AVGCTRL.reg = ADC_AVGCTRL_SAMPLENUM_32| ADC_AVGCTRL_ADJRES(4);;
 
-
   ADC->CTRLB.reg = ADC_CTRLB_PRESCALER_DIV128 |
                  ADC_CTRLB_RESSEL_16BIT |
                  ADC_CTRLB_FREERUN;

Marlin/src/HAL/SAMD21/HAL.h

@@ -47,7 +47,6 @@ typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
 extern DefaultSerial2 MSerial0;
 extern DefaultSerial3 MSerial1;
 
-
 #define __MSERIAL(X) MSerial##X
 #define _MSERIAL(X) __MSERIAL(X)
 #define MSERIAL(X) _MSERIAL(INCREMENT(X))

Marlin/src/HAL/SAMD21/SAMD21.h

@@ -57,8 +57,6 @@
                                        : (P == 3 && WITHIN(B, 20, 21)) ? 10 + (B) - 20                                        \
                                        : -1)
 
-
-
 #define A2_AIN 3
 #define A3_AIN 4
 #define A4_AIN 5

Marlin/src/HAL/SAMD21/Servo.cpp

@@ -55,7 +55,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF
 
-
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 
 FORCE_INLINE static uint16_t getTimerCount() {

Marlin/src/HAL/SAMD21/eeprom_flash.cpp

@@ -37,19 +37,24 @@ static const uint8_t flashdata[TOTAL_FLASH_SIZE]  __attribute__((__aligned__(256
 
 #include "../shared/eeprom_api.h"
 
-size_t PersistentStore::capacity() {
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
-  return MARLIN_EEPROM_SIZE;
+
- /* const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
+/*
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
+  const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
                 sblk = NVMCTRL->SEESTAT.bit.SBLK;
 
-  return   (!psz && !sblk)         ? 0
+  return (
-         : (psz <= 2)              ? (0x200 << psz)
+    (!psz && !sblk)         ? 0
-         : (sblk == 1 || psz == 3) ?  4096
+   : (psz <= 2)              ? (0x200 << psz)
-         : (sblk == 2 || psz == 4) ?  8192
+   : (sblk == 1 || psz == 3) ?  4096
-         : (sblk <= 4 || psz == 5) ? 16384
+   : (sblk == 2 || psz == 4) ?  8192
-         : (sblk >= 9 && psz == 7) ? 65536
+   : (sblk <= 4 || psz == 5) ? 16384
-                                   : 32768;*/
+   : (sblk >= 9 && psz == 7) ? 65536
+                             : 32768
+  ) - eeprom_exclude_size;
 }
+*/
 
 uint32_t PAGE_SIZE;
 uint32_t ROW_SIZE;
@@ -99,8 +104,7 @@ bool PersistentStore::access_finish() {
     volatile uint32_t *dst_addr =  (volatile uint32_t *) &flashdata;
 
     uint32_t *pointer = (uint32_t *) buffer;
-    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i+=4) {
+    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i += 4) {
-
       *dst_addr = (uint32_t) *pointer;
       pointer++;
       dst_addr ++;
@@ -120,19 +124,19 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   if (!hasWritten) {
     // init temp buffer
     buffer = (uint8_t *) malloc(MARLIN_EEPROM_SIZE);
-    hasWritten=true;
+    hasWritten = true;
   }
 
-  memcpy(buffer+pos,value,size);
+  memcpy(buffer + REAL_EEPROM_ADDR(pos), value, size);
   pos += size;
   return false;
 }
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  volatile uint8_t *dst_addr =  (volatile uint8_t *) &flashdata;
+  volatile uint8_t *dst_addr = (volatile uint8_t *) &flashdata;
-  dst_addr += pos;
+  dst_addr += REAL_EEPROM_ADDR(pos);
 
-  memcpy(value,(const void *) dst_addr,size);
+  memcpy(value, (const void *)dst_addr, size);
   pos += size;
   return false;
 }

Marlin/src/HAL/SAMD21/eeprom_qspi.cpp

@@ -38,7 +38,7 @@
 
 static bool initialized;
 
-size_t PersistentStore::capacity() { return qspi.size(); }
+size_t PersistentStore::capacity() { return qspi.size() - eeprom_exclude_size; }
 
 bool PersistentStore::access_start() {
   if (!initialized) {
@@ -56,7 +56,7 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
     const uint8_t v = *value;
-    qspi.writeByte(pos, v);
+    qspi.writeByte(REAL_EEPROM_ADDR(pos), v);
     crc16(crc, &v, 1);
     pos++;
     value++;
@@ -66,7 +66,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   while (size--) {
-    uint8_t c = qspi.readByte(pos);
+    const uint8_t c = qspi.readByte(REAL_EEPROM_ADDR(pos));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;

Marlin/src/HAL/SAMD21/eeprom_wired.cpp

@@ -42,7 +42,7 @@
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -51,7 +51,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
   uint16_t written = 0;
   while (size--) {
     const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
     if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
       if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -69,7 +69,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
     if (writing) *value = c;
     crc16(crc, &c, 1);
     pos++;