btt stm32 CR6 Fixes

Fix compiling errors for DGUS displays

.aiderignore

@@ -1,21 +0,0 @@
-# Build artifacts
-buildroot/
-*.o
-*.a
-*.so
-*.dylib
-*.dll
-*.exe
-
-# Web assets
-*.min.js
-*.min.css
-
-# Generated files
-__pycache__/
-*.pyc
-.DS_Store
-
-# IDE files
-.vscode/
-.idea/

.github/ISSUE_TEMPLATE/config.yml

@@ -7,7 +7,7 @@ contact_links:
     url: https://www.facebook.com/groups/1049718498464482
     about: Please ask and answer questions here.
   - name: 🕹 Marlin on Discord
-    url: https://discord.com/servers/marlin-firmware-461605380783472640
+    url: https://discord.gg/n5NJ59y
     about: Join the Discord server for support and discussion.
   - name: 🔗 Marlin Discussion Forum
     url: https://reprap.org/forum/list.php?415

.github/contributing.md

@@ -43,7 +43,7 @@ We have a Message Board and a Facebook group where our knowledgable user communi
 
 If chat is more your speed, you can join the MarlinFirmware Discord server:
 
-* Use the link https://discord.com/servers/marlin-firmware-461605380783472640 to join up as a General User.
+* Use the link https://discord.gg/n5NJ59y to join up as a General User.
 * Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
 * Use the `#general` channel for general questions or discussion about Marlin.
 * Other channels exist for certain topics or are limited to Patrons. Check the channel list.

.github/workflows/auto-label.yml

@@ -14,7 +14,7 @@ jobs:
   autolabel:
     name: Auto Label
     if: github.repository == 'MarlinFirmware/Marlin'
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
     steps:
     - name: Auto Label for [BUG]
       uses: actions/github-script@v7

.github/workflows/bump-date.yml

@@ -14,7 +14,7 @@ jobs:
     name: Bump Distribution Date
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
 

.github/workflows/check-pr.yml

@@ -18,7 +18,7 @@ jobs:
     name: PR Bad Target
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
     - uses: superbrothers/close-pull-request@v3

.github/workflows/ci-build-tests.yml

@@ -14,8 +14,6 @@ on:
     - config/**
     - data/**
     - docs/**
-    - test/**
-    - Marlin/tests/**
     - '**/*.md'
   push:
     branches:
@@ -25,8 +23,6 @@ on:
     - config/**
     - data/**
     - docs/**
-    - test/**
-    - Marlin/tests/**
     - '**/*.md'
 
 jobs:
@@ -34,19 +30,14 @@ jobs:
     name: Build Test
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     strategy:
-      fail-fast: true
       matrix:
         test-platform:
 
-        # RP2040
-        - SKR_Pico
-
         # Native
         - linux_native
-        - simulator_linux_release
 
         # AVR
         - mega2560
@@ -109,11 +100,11 @@ jobs:
 
         # STM32F4
         - ARMED
-        - BTT_BTT002
-        - BTT_GTR_V1_0
-        - BTT_SKR_PRO
+        - BIGTREE_BTT002
+        - BIGTREE_GTR_V1_0
+        - BIGTREE_SKR_PRO
         - FLYF407ZG
-        - STM32F446VE_fysetc
+        - FYSETC_S6
         - LERDGEK
         - LERDGEX
         - mks_robin_pro2
@@ -151,12 +142,6 @@ jobs:
         # HC32
         - HC32F460C_aquila_101
 
-        # GD32F3
-        - GD32F303RE_creality_mfl
-
-        # GD32F1
-        - GD32F103RC_aquila_mfl
-
         # LPC176x - Lengthy tests
         - LPC1768
         - LPC1769
@@ -170,20 +155,15 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-build-v1
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
         restore-keys: |
-          ${{ runner.os }}-pip-build-
+          ${{ runner.os }}-pip-
 
     - name: Cache PlatformIO
       uses: actions/cache@v4
       with:
-        path: |
-          ~/.platformio
-          .pio/build
-          .pio/libdeps
-        key: ${{ runner.os }}-pio-build-v1
-        restore-keys: |
-          ${{ runner.os }}-pio-build-
+        path: ~/.platformio
+        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5
@@ -197,14 +177,6 @@ jobs:
         pio upgrade --dev
         pio pkg update --global
 
-    - name: Install Simulator dependencies
-      run: |
-        sudo apt-get update
-        sudo apt-get install build-essential
-        sudo apt-get install libsdl2-dev
-        sudo apt-get install libsdl2-net-dev
-        sudo apt-get install libglm-dev
-
     - name: Run ${{ matrix.test-platform }} Tests
       run: |
         make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}

.github/workflows/ci-unit-tests.yml

@@ -36,7 +36,7 @@ jobs:
     # pulls them into additional branches.
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
     - name: Check out the PR
@@ -46,20 +46,15 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-unit-v1
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
         restore-keys: |
-          ${{ runner.os }}-pip-unit-
+          ${{ runner.os }}-pip-
 
     - name: Cache PlatformIO
       uses: actions/cache@v4
       with:
-        path: |
-          ~/.platformio
-          .pio/build
-          .pio/libdeps
-        key: ${{ runner.os }}-pio-tests-v1
-        restore-keys: |
-          ${{ runner.os }}-pio-tests-
+        path: ~/.platformio
+        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5

.github/workflows/ci-validate-boards.yml

@@ -1,48 +0,0 @@
-#
-# ci-validate-boards.yml
-# Validate boards.h to make sure it's all set up correctly
-#
-
-name: CI - Validate boards.h
-
-# We can do the on: section as two items, one for pull requests and one for pushes...
-on:
-  pull_request:
-    branches:
-    - bugfix-2.1.x
-    paths:
-    - 'Marlin/src/core/boards.h'
-  push:
-    branches:
-    - bugfix-2.1.x
-    paths:
-    - 'Marlin/src/core/boards.h'
-
-jobs:
-  validate_pins_files:
-    name: Validate boards.h
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-22.04
-
-    steps:
-    - name: Check out the PR
-      uses: actions/checkout@v4
-
-    - name: Cache pip
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-boards-v1
-        restore-keys: |
-          ${{ runner.os }}-pip-boards-
-
-    - name: Select Python 3.9
-      uses: actions/setup-python@v5
-      with:
-        python-version: '3.9'
-        architecture: 'x64'
-
-    - name: Validate core/boards.h
-      run: |
-        make validate-boards -j

.github/workflows/ci-validate-pins.yml

@@ -1,51 +0,0 @@
-#
-# ci-validate-pins.yml
-# Validate that all of the pins files are unchanged by pinsformat.py
-#
-
-name: CI - Validate Pins Files
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths:
-    - 'Marlin/src/pins/*/**'
-  push:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths:
-    - 'Marlin/src/pins/*/**'
-
-jobs:
-  validate_pins_files:
-    name: Validate Pins Files
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-22.04
-
-    steps:
-    - name: Check out the PR
-      uses: actions/checkout@v4
-
-    - name: Cache pip
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-pins-v1
-        restore-keys: |
-          ${{ runner.os }}-pip-pins-
-
-    - name: Select Python 3.9
-      uses: actions/setup-python@v5
-      with:
-        python-version: '3.9'
-        architecture: 'x64'
-
-    - name: Validate all pins files
-      run: |
-        make validate-pins -j

.github/workflows/clean-closed.yml

@@ -13,7 +13,7 @@ on:
 
 jobs:
   remove_label:
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     strategy:
       matrix:

.github/workflows/close-stale.yml

@@ -14,7 +14,7 @@ jobs:
     name: Close Stale Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
     - uses: actions/stale@v9

.github/workflows/lock-closed.yml

@@ -14,7 +14,7 @@ jobs:
     name: Lock Closed Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
     - uses: dessant/lock-threads@v5

.github/workflows/unlock-reopened.yml

@@ -14,7 +14,7 @@ jobs:
     name: Unlock Reopened
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-latest
 
     steps:
     - uses: OSDKDev/unlock-issues@v1.1

.gitignore

@@ -125,7 +125,6 @@ vc-fileutils.settings
 # Visual Studio Code
 .vscode/*
 !.vscode/extensions.json
-*.code-workspace
 
 # Simulation files
 imgui.ini
@@ -169,6 +168,3 @@ __pycache__
 tags
 *.logs
 *.bak
-.aider*
-!.aiderignore
-.env

.zed/settings.json

@@ -1,16 +0,0 @@
-/**
- * Marlin-specific settings for Zed
- *
- * For a full list of overridable settings, and general information on folder-specific settings,
- * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
- */
-{
-  "languages": {
-    "C": {
-      "enable_language_server": false
-    },
-    "C++": {
-      "enable_language_server": false
-    }
-  }
-}

Makefile

@@ -2,24 +2,22 @@ SCRIPTS_DIR := buildroot/share/scripts
 CONTAINER_RT_BIN := docker
 CONTAINER_RT_OPTS := --rm -v $(PWD):/code -v platformio-cache:/root/.platformio
 CONTAINER_IMAGE := marlin-dev
-UNIT_TEST_CONFIG ?= default
 
 help:
 	@echo "Tasks for local development:"
-	@echo "make marlin                    : Build Marlin for the configured board"
-	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
-	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
-	@echo "make validate-boards -j        : Validate boards.h and pins.h for standards compliance"
+	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make format-pins               : Reformat all pins files"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
 	@echo "make tests-all-local           : Run all tests locally"
 	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
-	@echo "make unit-test-single-local    : Run unit tests for a single config locally"
-	@echo "make unit-test-single-local-docker : Run unit tests for a single config locally, using docker"
-	@echo "make unit-test-all-local       : Run all code tests locally"
-	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker"
-	@echo "make setup-local-docker        : Setup local docker using buildx"
+#	@echo "make unit-test-single-ci      : Run a single code test from inside the CI"
+#	@echo "make unit-test-single-local   : Run a single code test locally"
+#	@echo "make unit-test-single-local-docker : Run a single code test locally, using docker-compose"
+	@echo "make unit-test-all-local      : Run all code tests locally"
+	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker-compose"
+	@echo "make setup-local-docker        : Setup local docker-compose"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -29,9 +27,6 @@ help:
 	@echo "                       run on GitHub CI"
 	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
 	@echo "                       the index of the test (1-based)"
-	@echo "  UNIT_TEST_CONFIG     Set the name of the config from the test folder, without"
-	@echo "                       the leading number. Default is 'default'". Used with the
-	@echo "                       unit-test-single-* tasks"
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
@@ -56,29 +51,27 @@ tests-single-local-docker:
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
 
 tests-all-local:
-	@python -c "import yaml" 2>/dev/null || (echo 'pyyaml module is not installed. Install it with "python -m pip install pyyaml"' && exit 1)
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$(python $(SCRIPTS_DIR)/get_test_targets.py) ; do \
-	    if [ "$$TEST_TARGET" = "linux_native" ] && [ "$$(uname)" = "Darwin" ]; then \
-	      echo "Skipping tests for $$TEST_TARGET on macOS" ; \
-	      continue ; \
-	    fi ; \
-	    echo "Running tests for $$TEST_TARGET" ; \
-	    run_tests . $$TEST_TARGET || exit 1 ; \
-	    sleep 5; \
-	  done
+	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
 
 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
 
-unit-test-single-local:
-	platformio run -t marlin_$(UNIT_TEST_CONFIG) -e linux_native_test
+#unit-test-single-ci:
+#	export GIT_RESET_HARD=true
+#	$(MAKE) unit-test-single-local TEST_TARGET=$(TEST_TARGET)
 
-unit-test-single-local-docker:
-	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local UNIT_TEST_CONFIG=$(UNIT_TEST_CONFIG)
+# TODO: How can we limit tests with ONLY_TEST with platformio?
+#unit-test-single-local:
+#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local" ; return 1; fi
+#	platformio run -t marlin_$(TEST_TARGET)
+
+#unit-test-single-local-docker:
+#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local-docker" ; return 1; fi
+#	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+#	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local TEST_TARGET=$(TEST_TARGET) ONLY_TEST="$(ONLY_TEST)"
 
 unit-test-all-local:
 	platformio run -t test-marlin -e linux_native_test
@@ -92,22 +85,7 @@ setup-local-docker:
 
 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')
 
-.PHONY: $(PINS) format-pins validate-pins
-
 $(PINS): %:
-	@echo "Formatting $@"
-	@python $(SCRIPTS_DIR)/pinsformat.py $< $@
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@
 
 format-pins: $(PINS)
-
-validate-pins: format-pins
-	@echo "Validating pins files"
-	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)
-
-BOARDS_FILE := Marlin/src/core/boards.h
-
-.PHONY: validate-boards
-
-validate-boards:
-	@echo "Validating boards.h file"
-	@python $(SCRIPTS_DIR)/validate_boards.py $(BOARDS_FILE) || (echo "\nError: boards.h file is not valid. Please check and correct it.\n" && exit 1)

Marlin/Makefile

@@ -127,9 +127,9 @@ NEOPIXEL           ?= 0
 # on GCC versions:
 #   https://www.avrfreaks.net/comment/1789106#comment-1789106
 
-CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d' ' )
-CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d' ' )
-CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d' ' )
+CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
+CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
+CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
 CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
 ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
   $(warning This GCC version $(CC_VER) is likely broken. Enabling relocation workaround.)
@@ -187,17 +187,6 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1033)
 # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
 else ifeq ($(HARDWARE_MOTHERBOARD),1034)
 
-# RAMPS 1.6+ (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1035)
-# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1036)
-# RAMPS 1.6+ (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1037)
-# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1038)
-# RAMPS 1.6+ (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1039)
-
 #
 # RAMPS Derivatives - ATmega1280, ATmega2560
 #
@@ -232,113 +221,108 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# Zonestar zrib V2.0 (Chinese RAMPS replica)
+# zrib V2.0 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# Zonestar zrib V5.2 (Chinese RAMPS replica)
+# zrib V5.2 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Zonestar zrib V5.3 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
   MCU              ?= atmega1280
   PROG_MCU         ?= m1280
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
 # Raise3D N series Rumba derivative
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
 # Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
 # Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
 # Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
 # Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
 # Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
 # MakeBoard Mini v2.1.2 by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
 # TriGorilla Anycubic version 1.3-based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
 #   ... Ver 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
 #   ... Rev 1.1 (new servo pin order)
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
+else ifeq ($(HARDWARE_MOTHERBOARD),1137)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
 # Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
 # FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 # FYSETC F6 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+else ifeq ($(HARDWARE_MOTHERBOARD),1142)
 # Wanhao Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
+else ifeq ($(HARDWARE_MOTHERBOARD),1143)
 # VORON Design
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
+else ifeq ($(HARDWARE_MOTHERBOARD),1144)
 # Tronxy TRONXY-V3-1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+else ifeq ($(HARDWARE_MOTHERBOARD),1145)
 # Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+else ifeq ($(HARDWARE_MOTHERBOARD),1146)
 # TT OSCAR
+else ifeq ($(HARDWARE_MOTHERBOARD),1147)
+# Overlord/Overlord Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1148)
+# ADIMLab Gantry v1
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# BIQU Tango V1
+# ADIMLab Gantry v2
 else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# MKS GEN L V2
+# BIQU Tango V1
 else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2.1
+# MKS GEN L V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
+# MKS GEN L V2.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
+# Copymaster 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero IDEX printer
+# Ortur 4
 else ifeq ($(HARDWARE_MOTHERBOARD),1155)
-# Tenlog D3, D5, D6 IDEX Printer
+# Tenlog D3 Hero IDEX printer
 else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
+# Tenlog D3,5,6 Pro IDEX printers
 else ifeq ($(HARDWARE_MOTHERBOARD),1157)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1158)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1159)
-# Longer LK1 PRO / Alfawise U20 Pro (PRO version)
+# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
 else ifeq ($(HARDWARE_MOTHERBOARD),1160)
-# Longer LKx PRO / Alfawise Uxx Pro (PRO version)
+# Longer LK1 PRO / Alfawise U20 Pro (PRO version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1161)
-# Pxmalion Core I3
+# Longer LKx PRO / Alfawise Uxx Pro (PRO version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1162)
-# Panowin Cutlass (as found in the Panowin F1)
+# Zonestar zrib V5.3 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1163)
-# Kodama Bardo V1.x (as found in the Kodama Trinus)
+# Pxmalion Core I3
 else ifeq ($(HARDWARE_MOTHERBOARD),1164)
-# XTLW MFF V1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1165)
-# XTLW MFF V2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1166)
-
 
 #
 # RAMBo and derivatives
@@ -356,7 +340,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # abee Scoovo X9H
 else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# ThinkerV2
+# Rambo ThinkerV2
 else ifeq ($(HARDWARE_MOTHERBOARD),1206)
 
 #
@@ -399,40 +383,30 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1315)
 else ifeq ($(HARDWARE_MOTHERBOARD),1316)
 # Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for Mecreator2
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
-# Geeetech GT2560 Rev B for A20(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1319)
 # Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1320)
+else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+# Geeetech GT2560 Rev B for Mecreator2
+else ifeq ($(HARDWARE_MOTHERBOARD),1319)
 # Geeetech GT2560 Rev B for A20(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1321)
+else ifeq ($(HARDWARE_MOTHERBOARD),1320)
 # Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1322)
+else ifeq ($(HARDWARE_MOTHERBOARD),1321)
 # Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1323)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1324)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1325)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1326)
+else ifeq ($(HARDWARE_MOTHERBOARD),1322)
 # Leapfrog Xeed 2015
-else ifeq ($(HARDWARE_MOTHERBOARD),1327)
+else ifeq ($(HARDWARE_MOTHERBOARD),1323)
 # PICA Shield (original version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1328)
+else ifeq ($(HARDWARE_MOTHERBOARD),1324)
 # PICA Shield (rev C or later)
-else ifeq ($(HARDWARE_MOTHERBOARD),1329)
+else ifeq ($(HARDWARE_MOTHERBOARD),1325)
 # Intamsys 4.0 (Funmat HT)
-else ifeq ($(HARDWARE_MOTHERBOARD),1330)
+else ifeq ($(HARDWARE_MOTHERBOARD),1326)
 # Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
-else ifeq ($(HARDWARE_MOTHERBOARD),1331)
+else ifeq ($(HARDWARE_MOTHERBOARD),1327)
+# Geeetech GT2560 Rev B for A20(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1328)
 # Mega controller & Protoneer CNC Shield V3.00
-else ifeq ($(HARDWARE_MOTHERBOARD),1332)
-# WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
-else ifeq ($(HARDWARE_MOTHERBOARD),1333)
-# Geeetech GT2560 V4.1B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1334)
+else ifeq ($(HARDWARE_MOTHERBOARD),1329)
 
 #
 # ATmega1281, ATmega2561
@@ -466,7 +440,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1502)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
   PROG_MCU         ?= m644p
-# Melzi V2
+# Melzi V2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
@@ -476,38 +450,33 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1504)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# Melzi Creality3D (for CR-10 etc)
+# Melzi Creality3D board (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# Melzi Creality3D (for Ender-2)
+# Melzi Malyan M150 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# Melzi Malyan M150
+# Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# Tronxy X5S
+# STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# STB V1.1
+# Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
-# Azteeg X1
-else ifeq ($(HARDWARE_MOTHERBOARD),1510)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1511)
+else ifeq ($(HARDWARE_MOTHERBOARD),1510)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
   PROG_MCU         ?= m1284p
@@ -868,8 +837,8 @@ else ifeq ($(HARDWARE_VARIANT), archim)
 endif
 
 # Add all the source directories as include directories too
-CINCS = ${addprefix -I, ${VPATH}}
-CXXINCS = ${addprefix -I, ${VPATH}}
+CINCS = ${addprefix -I ,${VPATH}}
+CXXINCS = ${addprefix -I ,${VPATH}}
 
 # Silence warnings for library code (won't work for .h files, unfortunately)
 LIBWARN = -w -Wno-packed-bitfield-compat
@@ -1026,7 +995,7 @@ extcoff: $(TARGET).elf
 	$(NM) -n $< > $@
 
 # Link: create ELF output file from library.
-LDFLAGS+= -Wl,-V
+
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
 	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)

Marlin/Version.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,32 +28,177 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.1.x"
+#define SHORT_BUILD_VERSION "DW7.4.9"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+
+#if(ENABLED(MachineMini))
+  #define VerChar1 "M"
+#elif(ENABLED(MachineEnder2))
+  #define VerChar1 "E2"
+#elif(ENABLED(MachineEnder2Pro))
+  #define VerChar1 "E2P"
+#elif(ENABLED(MachineEnder3))
+  #define VerChar1 "E3"
+#elif ENABLED(MachineEnder3V2)
+  #define VerChar1 "E3V2"
+#elif ENABLED(MachineEnder3S1)
+  #define VerChar1 "E3S1"
+#elif ENABLED(MachineEnder3Max)
+  #define VerChar1 "E3M"
+#elif(ENABLED(MachineEnder4))
+  #define VerChar1 "E4"
+#elif(ENABLED(MachineEnder5))
+  #define VerChar1 "E5"
+#elif(ENABLED(MachineEnder6))
+  #define VerChar1 "E6"
+#elif(ENABLED(MachineEnder7))
+  #define VerChar1 "E7"
+#elif(ENABLED(MachineSermoonD1))
+  #define VerChar1 "D1"
+#elif(ENABLED(MachineEnder5Plus))
+  #define VerChar1 "E5P"
+#elif(ENABLED(MachineCR20))
+  #define VerChar1 "2"
+#elif(ENABLED(MachineCR10Orig))
+  #define VerChar1 "O"
+#elif(ENABLED(MachineCR10Std))
+  #define VerChar1 "S"
+#elif(ENABLED(MachineCRX))
+  #define VerChar1 "X"
+#elif(ENABLED(MachineCR6))
+  #define VerChar1 "CR6"
+#elif(ENABLED(MachineCR5))
+  #define VerChar1 "CR5"
+#elif(ENABLED(MachineCR6Max))
+  #define VerChar1 "CR6M"
+#elif(ENABLED(MachineS4))
+  #define VerChar1 "4"
+#elif(ENABLED(MachineS5) || ENABLED(MachineCR10Max))
+  #define VerChar1 "5"
+#elif ENABLED(MachineCR2020)
+  #define VerChar1 "20"
+#elif(ENABLED(MachineCR30))
+  #define VerChar1 "CR30"
+#endif
+
+#if(ENABLED(HotendStock))
+#define VerChar2 "S"
+#elif(ENABLED(HotendE3D))
+#define VerChar2 "E"
+#elif ENABLED(HotendMosquito)
+#define VerChar2 "M"
+#endif
+
+#if(ENABLED(HotendAllMetal))
+#define VerChar3 "M"
+#else
+#define VerChar3 "S"
+#endif
+
+
+#if(ENABLED(BedAC))
+#define VerChar4 "A"
+#elif(ENABLED(BedDC))
+#define VerChar4 "D"
+#else
+#define VerChar4 "N"
+#endif
+
+#if(ENABLED(ABL_EZABL))
+#define VerChar5 "A"
+#elif(ENABLED(ABL_BLTOUCH))
+#define VerChar5 "B"
+#else
+#define VerChar5 "N"
+#endif
+
+#if(ENABLED(ABL_UBL))
+#define VerChar6 "U"
+#elif(ENABLED(ABL_BI))
+#define VerChar6 "B"
+#else
+#define VerChar6 "N"
+#endif
+
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D " VerChar1 VerChar2 VerChar3 VerChar4 VerChar5 VerChar6
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2025-05-02"
-
-/**
- * The protocol for communication to the host. Protocol indicates communication
- * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
- * (Other behaviors are given by the firmware version and capabilities report.)
- */
-//#define PROTOCOL_VERSION "1.0"
+#define STRING_DISTRIBUTION_DATE "2024-04-08"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#if(ENABLED(MachineMini))
+  #define CUSTOM_MACHINE_NAME "Mini SuPeR"
+#elif(ENABLED(MachineCR10Smart))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10Smart"
+#elif(ENABLED(MachineCR10SmartPro))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10SmartPro"
+#elif(ENABLED(MachineEnder2))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender2"
+#elif(ENABLED(MachineEnder2Pro))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender2 Pro"
+#elif(ENABLED(MachineEnder3))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3"
+#elif(ENABLED(MachineEnder3Max))
+  #define CUSTOM_MACHINE_NAME "TM3D E3Max"
+#elif(ENABLED(MachineEnder6))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender6"
+#elif(ENABLED(MachineEnder7))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender7"
+#elif(ENABLED(MachineEnder3V2))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3V2"
+#elif(ENABLED(MachineEnder3S1))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender3S1"
+#elif(ENABLED(MachineEnder4))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender4"
+#elif(ENABLED(MachineEnder5))
+  #define CUSTOM_MACHINE_NAME "TM3D Ender5"
+#elif(ENABLED(MachineEnder5Plus))
+  #define CUSTOM_MACHINE_NAME "TM3D E5 Plus"
+#elif(ENABLED(MachineCR20))
+  #define CUSTOM_MACHINE_NAME "SuPeR CR-20"
+#elif(ENABLED(MachineCR10Orig))
+  #define CUSTOM_MACHINE_NAME "SuPeR CR-10"
+#elif(ENABLED(MachineCRX))
+  #define CUSTOM_MACHINE_NAME "TM3D CR-X"
+#elif ENABLED(MachineCR10SProV2)
+  #define CUSTOM_MACHINE_NAME "TM3D 10SProV2"
+#elif(ENABLED(MachineCR10SPro))
+  #define CUSTOM_MACHINE_NAME "TM3D 10S Pro"
+#elif(ENABLED(MachineCR10Max))
+  #define CUSTOM_MACHINE_NAME "TM3D Max"
+#elif(ENABLED(MachineCR10SV3))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10V3"
+#elif(ENABLED(MachineCR10SV2))
+  #define CUSTOM_MACHINE_NAME "TM3D CR10V2"
+#elif(ENABLED(MachineCR10Std))
+  #define CUSTOM_MACHINE_NAME "300 SuPeR"
+#elif(ENABLED(MachineS4))
+  #define CUSTOM_MACHINE_NAME "400 SuPeR"
+#elif(ENABLED(MachineS5))
+  #define CUSTOM_MACHINE_NAME "500 SuPeR"
+#elif ENABLED(MachineCR2020)
+  #define CUSTOM_MACHINE_NAME "TM3D 2020"
+#elif ENABLED(MachineSermoonD1)
+  #define CUSTOM_MACHINE_NAME "SermoonD1"
+#elif ENABLED(MachineCR5)
+  #define CUSTOM_MACHINE_NAME "CR5 Pro"
+#elif ENABLED(MachineCR6)
+  #define CUSTOM_MACHINE_NAME "CR6"
+#elif ENABLED(MachineCR6Max)
+  #define CUSTOM_MACHINE_NAME "CR6 Max"
+#elif ENABLED(MachineCR30)
+  #define CUSTOM_MACHINE_NAME "CR30 Printmill"
+#endif
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -61,7 +206,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin_2.0"
 
 /**
  * Default generic printer UUID.
@@ -72,12 +217,12 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "marlinfw.org"
+#define WEBSITE_URL "tinymachines3d.com"
 
 /**
- * Set the vendor info the serial USB interface, if changeable.
- * Currently only supported by DUE platform.
+ * Set the vendor info the serial USB interface, if changable
+ * Currently only supported by DUE platform
  */
-//#define USB_DEVICE_VENDOR_ID           0x0000
-//#define USB_DEVICE_PRODUCT_ID          0x0000
-//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define  USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_INVERTED
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,
+  B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,
+  B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
+  B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
+  B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111,
+  B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111,
+  B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111,
+  B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111,
+  B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111,
+  B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
+  B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111,
+  B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
+  B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111,
+  B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111,
+  B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111,
+  B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111,
+  B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111,
+  B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111,
+  B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
+  B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
+  B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
+  B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
+  B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+  B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111,
+  B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111,
+  B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111,
+  B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011,
+  B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011,
+  B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011,
+  B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111,
+  B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111,
+  B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111
+};

Marlin/_Statusscreen.h

@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            3
+#define STATUS_LOGO_WIDTH       24
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B10000000,B00000000,B00000001,
+  B10001110,B00000000,B11100001,
+  B10011111,B00000001,B11110001,
+  B10010011,B10000001,B00111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10111001,B11111001,
+  B10001111,B00101000,B11110001,
+  B10000000,B00111000,B00000001,
+  B10000000,B00000000,B00000001,
+  B10011111,B11111111,B11111001,
+  B10010001,B01110100,B10011001,
+  B10011011,B00000110,B10101001,
+  B10011011,B01010100,B10101001,
+  B10011011,B01010110,B10101001,
+  B10011011,B01010100,B10011001,
+  B10011111,B11111111,B11111001,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif

Marlin/config.ini

@@ -62,11 +62,6 @@ motherboard                              = BOARD_RAMPS_14_EFB
 serial_port                              = 0
 baudrate                                 = 250000
 
-string_config_h_author                   = "(default from config.ini)"
-
-capabilities_report                      = on
-extended_capabilities_report             = on
-
 use_watchdog                             = on
 thermal_protection_hotends               = on
 thermal_protection_hysteresis            = 4
@@ -82,7 +77,9 @@ temp_sensor_0                            = 1
 temp_hysteresis                          = 3
 heater_0_mintemp                         = 5
 heater_0_maxtemp                         = 275
+preheat_1_temp_hotend                    = 180
 
+bang_max                                 = 255
 pidtemp                                  = on
 pid_k1                                   = 0.95
 pid_max                                  = 255
@@ -92,14 +89,6 @@ default_kp                               = 22.20
 default_ki                               = 1.08
 default_kd                               = 114.00
 
-temp_sensor_bed                          = 1
-bed_mintemp                              = 5
-bed_maxtemp                              = 150
-
-thermal_protection_bed                   = on
-thermal_protection_bed_hysteresis        = 2
-thermal_protection_bed_period            = 20
-
 x_driver_type                            = A4988
 y_driver_type                            = A4988
 z_driver_type                            = A4988
@@ -132,10 +121,10 @@ default_max_acceleration                 = { 3000, 3000, 100, 10000 }
 homing_feedrate_mm_m                     = { (50*60), (50*60), (4*60) }
 homing_bump_divisor                      = { 2, 2, 4 }
 
-x_enable_on                              = LOW
-y_enable_on                              = LOW
-z_enable_on                              = LOW
-e_enable_on                              = LOW
+x_enable_on                              = 0
+y_enable_on                              = 0
+z_enable_on                              = 0
+e_enable_on                              = 0
 
 invert_x_dir                             = false
 invert_y_dir                             = true
@@ -147,6 +136,11 @@ step_state_x                             = HIGH
 step_state_y                             = HIGH
 step_state_z                             = HIGH
 
+disable_x                                = off
+disable_y                                = off
+disable_z                                = off
+disable_e                                = off
+
 proportional_font_ratio                  = 1.0
 default_nominal_filament_dia             = 1.75
 
@@ -159,13 +153,18 @@ default_retract_acceleration             = 3000
 default_minimumfeedrate                  = 0.0
 default_mintravelfeedrate                = 0.0
 
+minimum_planner_speed                    = 0.05
 min_steps_per_segment                    = 6
 default_minsegmenttime                   = 20000
 
 [config:basic]
 bed_overshoot                            = 10
 busy_while_heating                       = on
+default_ejerk                            = 5.0
 default_keepalive_interval               = 2
+default_leveling_fade_height             = 0.0
+disable_other_extruders                  = on
+display_charset_hd44780                  = JAPANESE
 eeprom_boot_silent                       = on
 eeprom_chitchat                          = on
 endstoppullups                           = on
@@ -174,8 +173,10 @@ extrude_mintemp                          = 170
 host_keepalive_feature                   = on
 hotend_overshoot                         = 15
 jd_handle_small_segments                 = on
+lcd_info_screen_style                    = 0
+lcd_language                             = en
 max_bed_power                            = 255
-
+mesh_inset                               = 0
 min_software_endstops                    = on
 max_software_endstops                    = on
 min_software_endstop_x                   = on
@@ -184,48 +185,50 @@ min_software_endstop_z                   = on
 max_software_endstop_x                   = on
 max_software_endstop_y                   = on
 max_software_endstop_z                   = on
-
-preheat_1_label                          = "PLA"
-preheat_1_temp_hotend                    = 180
-preheat_1_temp_bed                       = 70
 preheat_1_fan_speed                      = 0
-
-preheat_2_label                          = "ABS"
-preheat_2_temp_hotend                    = 240
-preheat_2_temp_bed                       = 110
-preheat_2_fan_speed                      = 0
-
+preheat_1_label                          = "PLA"
+preheat_1_temp_bed                       = 70
 prevent_cold_extrusion                   = on
 prevent_lengthy_extrude                  = on
 printjob_timer_autostart                 = on
-
+probing_margin                           = 10
+show_bootscreen                          = on
+soft_pwm_scale                           = 0
+string_config_h_author                   = "(none, default config)"
 temp_bed_hysteresis                      = 3
 temp_bed_residency_time                  = 10
 temp_bed_window                          = 1
 temp_residency_time                      = 10
 temp_window                              = 1
 validate_homing_endstops                 = on
-
-editable_steps_per_unit                  = on
+xy_probe_feedrate                        = (133*60)
+z_clearance_between_probes               = 5
+z_clearance_deploy_probe                 = 10
+z_clearance_multi_probe                  = 5
 
 [config:advanced]
 arc_support                              = on
 auto_report_temperatures                 = on
-
 autotemp                                 = on
-autotemp_min                             = 210
-autotemp_max                             = 250
-autotemp_factor                          = 0.1f
 autotemp_oldweight                       = 0.98
-
+bed_check_interval                       = 5000
 default_stepper_timeout_sec              = 120
+default_volumetric_extruder_limit        = 0.00
 disable_idle_x                           = on
 disable_idle_y                           = on
 disable_idle_z                           = on
 disable_idle_e                           = on
 e0_auto_fan_pin                          = -1
+encoder_100x_steps_per_sec               = 80
+encoder_10x_steps_per_sec                = 30
+encoder_rate_multiplier                  = on
+extended_capabilities_report             = on
+extruder_auto_fan_speed                  = 255
+extruder_auto_fan_temperature            = 50
+fanmux0_pin                              = -1
+fanmux1_pin                              = -1
+fanmux2_pin                              = -1
 faster_gcode_parser                      = on
-debug_flags_gcode                        = on
 homing_bump_mm                           = { 5, 5, 2 }
 max_arc_segment_mm                       = 1.0
 min_arc_segment_mm                       = 0.1
@@ -234,11 +237,11 @@ n_arc_correction                         = 25
 serial_overrun_protection                = on
 slowdown                                 = on
 slowdown_divisor                         = 2
+temp_sensor_bed                          = 0
+thermal_protection_bed_hysteresis        = 2
+thermocouple_max_errors                  = 15
 tx_buffer_size                           = 0
-
-bed_check_interval                       = 5000
 watch_bed_temp_increase                  = 2
 watch_bed_temp_period                    = 60
-
 watch_temp_increase                      = 2
-watch_temp_period                        = 40
+watch_temp_period                        = 20

Marlin/src/HAL/AVR/HAL.h

@@ -129,11 +129,11 @@ typedef Servo hal_servo_t;
   #endif
 #endif
 
-#ifdef MMU_SERIAL_PORT
-  #if !WITHIN(MMU_SERIAL_PORT, 0, 3)
-    #error "MMU_SERIAL_PORT must be from 0 to 3"
+#ifdef MMU2_SERIAL_PORT
+  #if !WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #error "MMU2_SERIAL_PORT must be from 0 to 3"
   #endif
-  #define MMU_SERIAL mmuSerial
+  #define MMU2_SERIAL mmuSerial
 #endif
 
 #ifdef LCD_SERIAL_PORT
@@ -141,8 +141,8 @@ typedef Servo hal_servo_t;
     #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
   #define LCD_SERIAL lcdSerial
-  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
+  #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
 #endif
 
@@ -159,7 +159,7 @@ typedef Servo hal_servo_t;
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-#define HAL_SENSITIVE_PINS 0, 1
+#define HAL_SENSITIVE_PINS 0, 1,
 
 #ifdef __AVR_AT90USB1286__
   #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
@@ -204,7 +204,7 @@ public:
   static void isr_on()  { sei(); }
   static void isr_off() { cli(); }
 
-  static void delay_ms(const int ms) { delay(ms); }
+  static void delay_ms(const int ms) { _delay_ms(ms); }
 
   // Tasks, called from idle()
   static void idletask() {}

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -601,20 +601,20 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
 
 #endif // SERIAL_PORT_3
 
-#ifdef MMU_SERIAL_PORT
+#ifdef MMU2_SERIAL_PORT
 
-  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::store_rxd_char();
+  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
   }
 
-  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::_tx_udr_empty_irq();
+  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
   }
 
-  template class MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> >;
+  template class MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> >;
   MSerialMMU2 mmuSerial(MSerialMMU2::HasEmergencyParser);
 
-#endif // MMU_SERIAL_PORT
+#endif // MMU2_SERIAL_PORT
 
 #ifdef LCD_SERIAL_PORT
 
@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
   template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
   MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);
 
-  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
     template<typename Cfg>
     typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
       const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -205,7 +205,7 @@
     static ring_buffer_pos_t available();
     static void write(const uint8_t c);
     static void flushTX();
-    #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+    #if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(EXTENSIBLE_UI)
       static ring_buffer_pos_t get_tx_buffer_free();
     #endif
 
@@ -246,7 +246,7 @@
 
 #endif // !USBCON
 
-#ifdef MMU_SERIAL_PORT
+#ifdef MMU2_SERIAL_PORT
   template <uint8_t serial>
   struct MMU2SerialCfg {
     static constexpr int PORT               = serial;
@@ -260,7 +260,7 @@
     static constexpr bool RX_OVERRUNS       = false;
   };
 
-  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> > > MSerialMMU2;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
   extern MSerialMMU2 mmuSerial;
 #endif
 
@@ -276,7 +276,7 @@
     static constexpr bool DROPPED_RX        = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr bool RX_OVERRUNS       = ALL(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = (ANY(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS) || ENABLED(DWINOS_4));
   };
 
   typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -345,14 +345,6 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif
-  #if USE_CALIBRATION
-    #if (digitalPinToInterrupt(CALIBRATION_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(CALIBRATION_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(CALIBRATION_PIN), "CALIBRATION_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
-      pciSetup(CALIBRATION_PIN);
-    #endif
-  #endif
 
   // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -150,7 +150,7 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
       else {
         if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
         const uint16_t rft = (F_CPU) / (p * f_desired);
-        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
+        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=" STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
         res_fast_temp = rft - 1;
         res_pc_temp = rft / 2;
       }

Marlin/src/HAL/AVR/fastio/fastio_1280.h

@@ -28,6 +28,9 @@
  *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
  *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
  *   Analog Input  :                                                                                                                                                                    0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
+ *
+ * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
+ * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
  */
 
 #include "../fastio.h"

Marlin/src/HAL/AVR/fastio/fastio_1281.h

@@ -26,6 +26,9 @@
  *
  *   Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
+ *
+ * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
+ * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
  */
 
 #include "../fastio.h"

Marlin/src/HAL/AVR/fastio/fastio_168.h

@@ -26,6 +26,9 @@
  *
  *   Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
  *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
+ *
+ * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
+ * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
  */
 
 #include "../fastio.h"

Marlin/src/HAL/AVR/fastio/fastio_644.h

@@ -26,6 +26,9 @@
  *
  *   Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  *   Port:        B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
+ *
+ * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
+ * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
  */
 
 /**                        ATMega644

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -26,7 +26,10 @@
  *
  *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
- *            Logical pins 46-47 aren't supported by Teensyduino, but are supported below as E2 and E3
+ *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
+ *
+ * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
+ * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
  */
 
 #include "../fastio.h"
@@ -363,11 +366,8 @@
 #define AIO7_PWM    0
 #define AIO7_DDR    DDRF
 
-//-- 46-47 are not supported by Teensyduino
-//-- Don't use Arduino functions (pinMode, digitalWrite, etc.) on these pins
-#define PIN_E2   46
-#define PIN_E3   47
-
+//-- Begin not supported by Teensyduino
+//-- don't use Arduino functions on these pins pinMode/digitalWrite/etc
 #define DIO46_PIN   PINE2
 #define DIO46_RPORT PINE
 #define DIO46_WPORT PORTE
@@ -380,7 +380,10 @@
 #define DIO47_PWM   0
 #define DIO47_DDR   DDRE
 
-//--
+#define TEENSY_E2   46
+#define TEENSY_E3   47
+
+//-- end not supported by Teensyduino
 
 #undef PA0
 #define PA0_PIN     PINA0

Marlin/src/HAL/AVR/pinsDebug.h

@@ -22,23 +22,7 @@
 #pragma once
 
 /**
- * Pins Debugging for Atmel 8 bit AVR CPUs
- *
- *   - NUMBER_PINS_TOTAL
- *   - MULTI_NAME_PAD
- *   - getPinByIndex(index)
- *   - printPinNameByIndex(index)
- *   - getPinIsDigitalByIndex(index)
- *   - digitalPinToAnalogIndex(pin)
- *   - getValidPinMode(pin)
- *   - isValidPin(pin)
- *   - isAnalogPin(pin)
- *   - digitalRead_mod(pin)
- *   - pwm_status(pin)
- *   - printPinPWM(pin)
- *   - printPinPort(pin)
- *   - printPinNumber(pin)
- *   - printPinAnalog(pin)
+ * PWM print routines for Atmel 8 bit AVR CPUs
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -55,44 +39,44 @@
   #include "pinsDebug_Teensyduino.h"
   // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
   // portModeRegister takes a different argument
-  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
-  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
-  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
-  #define getValidPinMode(P) (*portModeRegister(P) & digitalPinToBitMask_DEBUG(P))
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
 
   #include "pinsDebug_plus_70.h"
-  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer_plus_70(P)
-  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask_plus_70(P)
-  #define digitalPinToPort_DEBUG(P) digitalPinToPort_plus_70(P)
-  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
+  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
 
 #else
 
-  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
-  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
-  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
-  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
+  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
 
 #endif
 
-#define isValidPin(P) (P >= 0 && P < NUMBER_PINS_TOTAL)
+#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
 #if AVR_ATmega1284_FAMILY
-  #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
-  #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
+  #define IS_ANALOG(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
+  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(IS_ANALOG(P) ? (P) - analogInputToDigitalPin(7) : -1)
 #else
   #define _ANALOG1(P) WITHIN(P, analogInputToDigitalPin(0), analogInputToDigitalPin(7))
   #define _ANALOG2(P) WITHIN(P, analogInputToDigitalPin(8), analogInputToDigitalPin(15))
-  #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
-  #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
+  #define IS_ANALOG(P) (_ANALOG1(P) || _ANALOG2(P))
+  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
+#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin
 
-void printPinNameByIndex(const uint8_t index) {
-  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[index].name);
+void PRINT_ARRAY_NAME(uint8_t x) {
+  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
   for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
@@ -104,7 +88,7 @@ void printPinNameByIndex(const uint8_t index) {
   }
 }
 
-#define getPinIsDigitalByIndex(x)   pgm_read_byte(&pin_array[x].is_digital)
+#define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
 
 #if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
   #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
@@ -125,7 +109,7 @@ void printPinNameByIndex(const uint8_t index) {
  * Print a pin's PWM status.
  * Return true if it's currently a PWM pin.
  */
-bool pwm_status(const uint8_t pin) {
+bool pwm_status(uint8_t pin) {
   char buffer[20];   // for the sprintf statements
 
   switch (digitalPinToTimer_DEBUG(pin)) {
@@ -292,7 +276,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }
 
-void printPinPWM(const uint8_t pin) {
+void pwm_details(uint8_t pin) {
   switch (digitalPinToTimer_DEBUG(pin)) {
 
     #if ABTEST(0)
@@ -363,7 +347,7 @@ void printPinPWM(const uint8_t pin) {
   #else
     UNUSED(print_is_also_tied);
   #endif
-} // printPinPWM
+} // pwm_details
 
 #ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
   int digitalRead_mod(const pin_t pin) {  // same as digitalRead except the PWM stop section has been removed
@@ -372,21 +356,21 @@ void printPinPWM(const uint8_t pin) {
   }
 #endif
 
-void printPinPort(const pin_t pin) {   // print port number
+void print_port(const pin_t pin) {   // print port number
   #ifdef digitalPinToPort_DEBUG
     uint8_t x;
     SERIAL_ECHOPGM("  Port: ");
     #if AVR_AT90USB1286_FAMILY
-      x = (pin == PIN_E2 || pin == PIN_E3) ? 'E' : 'A' + digitalPinToPort_DEBUG(pin) - 1;
+      x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64;
     #else
-      x = 'A' + digitalPinToPort_DEBUG(pin) - 1;
+      x = digitalPinToPort_DEBUG(pin) + 64;
     #endif
     SERIAL_CHAR(x);
 
     #if AVR_AT90USB1286_FAMILY
-      if (pin == PIN_E2)
+      if (pin == 46)
         x = '2';
-      else if (pin == PIN_E3)
+      else if (pin == 47)
         x = '3';
       else {
         uint8_t temp = digitalPinToBitMask_DEBUG(pin);
@@ -402,7 +386,7 @@ void printPinPort(const pin_t pin) {   // print port number
   #endif
 }
 
-#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
 
 #undef ABTEST

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -102,7 +102,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
 
 // digitalPinToBitMask(pin) is OK
 
-#define digitalRead_mod(P)  extDigitalRead(P)   // Teensyduino's version of digitalRead doesn't
+#define digitalRead_mod(p)  extDigitalRead(p)   // Teensyduino's version of digitalRead doesn't
                                                 // disable the PWMs so we can use it as is
 
 // portModeRegister(pin) is OK

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -48,92 +48,92 @@
 const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = {
   // PORTLIST
   // ------------------------
-  PE, // PE 0 ** 0 ** USART0_RX
-  PE, // PE 1 ** 1 ** USART0_TX
-  PE, // PE 4 ** 2 ** PWM2
-  PE, // PE 5 ** 3 ** PWM3
-  PG, // PG 5 ** 4 ** PWM4
-  PE, // PE 3 ** 5 ** PWM5
-  PH, // PH 3 ** 6 ** PWM6
-  PH, // PH 4 ** 7 ** PWM7
-  PH, // PH 5 ** 8 ** PWM8
-  PH, // PH 6 ** 9 ** PWM9
-  PB, // PB 4 ** 10 ** PWM10
-  PB, // PB 5 ** 11 ** PWM11
-  PB, // PB 6 ** 12 ** PWM12
-  PB, // PB 7 ** 13 ** PWM13
-  PJ, // PJ 1 ** 14 ** USART3_TX
-  PJ, // PJ 0 ** 15 ** USART3_RX
-  PH, // PH 1 ** 16 ** USART2_TX
-  PH, // PH 0 ** 17 ** USART2_RX
-  PD, // PD 3 ** 18 ** USART1_TX
-  PD, // PD 2 ** 19 ** USART1_RX
-  PD, // PD 1 ** 20 ** I2C_SDA
-  PD, // PD 0 ** 21 ** I2C_SCL
-  PA, // PA 0 ** 22 ** D22
-  PA, // PA 1 ** 23 ** D23
-  PA, // PA 2 ** 24 ** D24
-  PA, // PA 3 ** 25 ** D25
-  PA, // PA 4 ** 26 ** D26
-  PA, // PA 5 ** 27 ** D27
-  PA, // PA 6 ** 28 ** D28
-  PA, // PA 7 ** 29 ** D29
-  PC, // PC 7 ** 30 ** D30
-  PC, // PC 6 ** 31 ** D31
-  PC, // PC 5 ** 32 ** D32
-  PC, // PC 4 ** 33 ** D33
-  PC, // PC 3 ** 34 ** D34
-  PC, // PC 2 ** 35 ** D35
-  PC, // PC 1 ** 36 ** D36
-  PC, // PC 0 ** 37 ** D37
-  PD, // PD 7 ** 38 ** D38
-  PG, // PG 2 ** 39 ** D39
-  PG, // PG 1 ** 40 ** D40
-  PG, // PG 0 ** 41 ** D41
-  PL, // PL 7 ** 42 ** D42
-  PL, // PL 6 ** 43 ** D43
-  PL, // PL 5 ** 44 ** D44
-  PL, // PL 4 ** 45 ** D45
-  PL, // PL 3 ** 46 ** D46
-  PL, // PL 2 ** 47 ** D47
-  PL, // PL 1 ** 48 ** D48
-  PL, // PL 0 ** 49 ** D49
-  PB, // PB 3 ** 50 ** SPI_MISO
-  PB, // PB 2 ** 51 ** SPI_MOSI
-  PB, // PB 1 ** 52 ** SPI_SCK
-  PB, // PB 0 ** 53 ** SPI_SS
-  PF, // PF 0 ** 54 ** A0
-  PF, // PF 1 ** 55 ** A1
-  PF, // PF 2 ** 56 ** A2
-  PF, // PF 3 ** 57 ** A3
-  PF, // PF 4 ** 58 ** A4
-  PF, // PF 5 ** 59 ** A5
-  PF, // PF 6 ** 60 ** A6
-  PF, // PF 7 ** 61 ** A7
-  PK, // PK 0 ** 62 ** A8
-  PK, // PK 1 ** 63 ** A9
-  PK, // PK 2 ** 64 ** A10
-  PK, // PK 3 ** 65 ** A11
-  PK, // PK 4 ** 66 ** A12
-  PK, // PK 5 ** 67 ** A13
-  PK, // PK 6 ** 68 ** A14
-  PK, // PK 7 ** 69 ** A15
-  PG, // PG 4 ** 70 **
-  PG, // PG 3 ** 71 **
-  PJ, // PJ 2 ** 72 **
-  PJ, // PJ 3 ** 73 **
-  PJ, // PJ 7 ** 74 **
-  PJ, // PJ 4 ** 75 **
-  PJ, // PJ 5 ** 76 **
-  PJ, // PJ 6 ** 77 **
-  PE, // PE 2 ** 78 **
-  PE, // PE 6 ** 79 **
-  PE, // PE 7 ** 80 **
-  PD, // PD 4 ** 81 **
-  PD, // PD 5 ** 82 **
-  PD, // PD 6 ** 83 **
-  PH, // PH 2 ** 84 **
-  PH, // PH 7 ** 85 **
+  PE  , // PE 0 ** 0 ** USART0_RX
+  PE  , // PE 1 ** 1 ** USART0_TX
+  PE  , // PE 4 ** 2 ** PWM2
+  PE  , // PE 5 ** 3 ** PWM3
+  PG  , // PG 5 ** 4 ** PWM4
+  PE  , // PE 3 ** 5 ** PWM5
+  PH  , // PH 3 ** 6 ** PWM6
+  PH  , // PH 4 ** 7 ** PWM7
+  PH  , // PH 5 ** 8 ** PWM8
+  PH  , // PH 6 ** 9 ** PWM9
+  PB  , // PB 4 ** 10 ** PWM10
+  PB  , // PB 5 ** 11 ** PWM11
+  PB  , // PB 6 ** 12 ** PWM12
+  PB  , // PB 7 ** 13 ** PWM13
+  PJ  , // PJ 1 ** 14 ** USART3_TX
+  PJ  , // PJ 0 ** 15 ** USART3_RX
+  PH  , // PH 1 ** 16 ** USART2_TX
+  PH  , // PH 0 ** 17 ** USART2_RX
+  PD  , // PD 3 ** 18 ** USART1_TX
+  PD  , // PD 2 ** 19 ** USART1_RX
+  PD  , // PD 1 ** 20 ** I2C_SDA
+  PD  , // PD 0 ** 21 ** I2C_SCL
+  PA  , // PA 0 ** 22 ** D22
+  PA  , // PA 1 ** 23 ** D23
+  PA  , // PA 2 ** 24 ** D24
+  PA  , // PA 3 ** 25 ** D25
+  PA  , // PA 4 ** 26 ** D26
+  PA  , // PA 5 ** 27 ** D27
+  PA  , // PA 6 ** 28 ** D28
+  PA  , // PA 7 ** 29 ** D29
+  PC  , // PC 7 ** 30 ** D30
+  PC  , // PC 6 ** 31 ** D31
+  PC  , // PC 5 ** 32 ** D32
+  PC  , // PC 4 ** 33 ** D33
+  PC  , // PC 3 ** 34 ** D34
+  PC  , // PC 2 ** 35 ** D35
+  PC  , // PC 1 ** 36 ** D36
+  PC  , // PC 0 ** 37 ** D37
+  PD  , // PD 7 ** 38 ** D38
+  PG  , // PG 2 ** 39 ** D39
+  PG  , // PG 1 ** 40 ** D40
+  PG  , // PG 0 ** 41 ** D41
+  PL  , // PL 7 ** 42 ** D42
+  PL  , // PL 6 ** 43 ** D43
+  PL  , // PL 5 ** 44 ** D44
+  PL  , // PL 4 ** 45 ** D45
+  PL  , // PL 3 ** 46 ** D46
+  PL  , // PL 2 ** 47 ** D47
+  PL  , // PL 1 ** 48 ** D48
+  PL  , // PL 0 ** 49 ** D49
+  PB  , // PB 3 ** 50 ** SPI_MISO
+  PB  , // PB 2 ** 51 ** SPI_MOSI
+  PB  , // PB 1 ** 52 ** SPI_SCK
+  PB  , // PB 0 ** 53 ** SPI_SS
+  PF  , // PF 0 ** 54 ** A0
+  PF  , // PF 1 ** 55 ** A1
+  PF  , // PF 2 ** 56 ** A2
+  PF  , // PF 3 ** 57 ** A3
+  PF  , // PF 4 ** 58 ** A4
+  PF  , // PF 5 ** 59 ** A5
+  PF  , // PF 6 ** 60 ** A6
+  PF  , // PF 7 ** 61 ** A7
+  PK  , // PK 0 ** 62 ** A8
+  PK  , // PK 1 ** 63 ** A9
+  PK  , // PK 2 ** 64 ** A10
+  PK  , // PK 3 ** 65 ** A11
+  PK  , // PK 4 ** 66 ** A12
+  PK  , // PK 5 ** 67 ** A13
+  PK  , // PK 6 ** 68 ** A14
+  PK  , // PK 7 ** 69 ** A15
+  PG  , // PG 4 ** 70 **
+  PG  , // PG 3 ** 71 **
+  PJ  , // PJ 2 ** 72 **
+  PJ  , // PJ 3 ** 73 **
+  PJ  , // PJ 7 ** 74 **
+  PJ  , // PJ 4 ** 75 **
+  PJ  , // PJ 5 ** 76 **
+  PJ  , // PJ 6 ** 77 **
+  PE  , // PE 2 ** 78 **
+  PE  , // PE 6 ** 79 **
+  PE  , // PE 7 ** 80 **
+  PD  , // PD 4 ** 81 **
+  PD  , // PD 5 ** 82 **
+  PD  , // PD 6 ** 83 **
+  PH  , // PH 2 ** 84 **
+  PH  , // PH 7 ** 85 **
 };
 
 #define digitalPinToPort_plus_70(P) ( pgm_read_byte( digital_pin_to_port_PGM_plus_70 + (P) ) )
@@ -141,92 +141,92 @@ const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = {
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
   // PIN IN PORT
   // ------------------------
-  _BV( 0 ), // PE 0 ** 0 ** USART0_RX
-  _BV( 1 ), // PE 1 ** 1 ** USART0_TX
-  _BV( 4 ), // PE 4 ** 2 ** PWM2
-  _BV( 5 ), // PE 5 ** 3 ** PWM3
-  _BV( 5 ), // PG 5 ** 4 ** PWM4
-  _BV( 3 ), // PE 3 ** 5 ** PWM5
-  _BV( 3 ), // PH 3 ** 6 ** PWM6
-  _BV( 4 ), // PH 4 ** 7 ** PWM7
-  _BV( 5 ), // PH 5 ** 8 ** PWM8
-  _BV( 6 ), // PH 6 ** 9 ** PWM9
-  _BV( 4 ), // PB 4 ** 10 ** PWM10
-  _BV( 5 ), // PB 5 ** 11 ** PWM11
-  _BV( 6 ), // PB 6 ** 12 ** PWM12
-  _BV( 7 ), // PB 7 ** 13 ** PWM13
-  _BV( 1 ), // PJ 1 ** 14 ** USART3_TX
-  _BV( 0 ), // PJ 0 ** 15 ** USART3_RX
-  _BV( 1 ), // PH 1 ** 16 ** USART2_TX
-  _BV( 0 ), // PH 0 ** 17 ** USART2_RX
-  _BV( 3 ), // PD 3 ** 18 ** USART1_TX
-  _BV( 2 ), // PD 2 ** 19 ** USART1_RX
-  _BV( 1 ), // PD 1 ** 20 ** I2C_SDA
-  _BV( 0 ), // PD 0 ** 21 ** I2C_SCL
-  _BV( 0 ), // PA 0 ** 22 ** D22
-  _BV( 1 ), // PA 1 ** 23 ** D23
-  _BV( 2 ), // PA 2 ** 24 ** D24
-  _BV( 3 ), // PA 3 ** 25 ** D25
-  _BV( 4 ), // PA 4 ** 26 ** D26
-  _BV( 5 ), // PA 5 ** 27 ** D27
-  _BV( 6 ), // PA 6 ** 28 ** D28
-  _BV( 7 ), // PA 7 ** 29 ** D29
-  _BV( 7 ), // PC 7 ** 30 ** D30
-  _BV( 6 ), // PC 6 ** 31 ** D31
-  _BV( 5 ), // PC 5 ** 32 ** D32
-  _BV( 4 ), // PC 4 ** 33 ** D33
-  _BV( 3 ), // PC 3 ** 34 ** D34
-  _BV( 2 ), // PC 2 ** 35 ** D35
-  _BV( 1 ), // PC 1 ** 36 ** D36
-  _BV( 0 ), // PC 0 ** 37 ** D37
-  _BV( 7 ), // PD 7 ** 38 ** D38
-  _BV( 2 ), // PG 2 ** 39 ** D39
-  _BV( 1 ), // PG 1 ** 40 ** D40
-  _BV( 0 ), // PG 0 ** 41 ** D41
-  _BV( 7 ), // PL 7 ** 42 ** D42
-  _BV( 6 ), // PL 6 ** 43 ** D43
-  _BV( 5 ), // PL 5 ** 44 ** D44
-  _BV( 4 ), // PL 4 ** 45 ** D45
-  _BV( 3 ), // PL 3 ** 46 ** D46
-  _BV( 2 ), // PL 2 ** 47 ** D47
-  _BV( 1 ), // PL 1 ** 48 ** D48
-  _BV( 0 ), // PL 0 ** 49 ** D49
-  _BV( 3 ), // PB 3 ** 50 ** SPI_MISO
-  _BV( 2 ), // PB 2 ** 51 ** SPI_MOSI
-  _BV( 1 ), // PB 1 ** 52 ** SPI_SCK
-  _BV( 0 ), // PB 0 ** 53 ** SPI_SS
-  _BV( 0 ), // PF 0 ** 54 ** A0
-  _BV( 1 ), // PF 1 ** 55 ** A1
-  _BV( 2 ), // PF 2 ** 56 ** A2
-  _BV( 3 ), // PF 3 ** 57 ** A3
-  _BV( 4 ), // PF 4 ** 58 ** A4
-  _BV( 5 ), // PF 5 ** 59 ** A5
-  _BV( 6 ), // PF 6 ** 60 ** A6
-  _BV( 7 ), // PF 7 ** 61 ** A7
-  _BV( 0 ), // PK 0 ** 62 ** A8
-  _BV( 1 ), // PK 1 ** 63 ** A9
-  _BV( 2 ), // PK 2 ** 64 ** A10
-  _BV( 3 ), // PK 3 ** 65 ** A11
-  _BV( 4 ), // PK 4 ** 66 ** A12
-  _BV( 5 ), // PK 5 ** 67 ** A13
-  _BV( 6 ), // PK 6 ** 68 ** A14
-  _BV( 7 ), // PK 7 ** 69 ** A15
-  _BV( 4 ), // PG 4 ** 70 **
-  _BV( 3 ), // PG 3 ** 71 **
-  _BV( 2 ), // PJ 2 ** 72 **
-  _BV( 3 ), // PJ 3 ** 73 **
-  _BV( 7 ), // PJ 7 ** 74 **
-  _BV( 4 ), // PJ 4 ** 75 **
-  _BV( 5 ), // PJ 5 ** 76 **
-  _BV( 6 ), // PJ 6 ** 77 **
-  _BV( 2 ), // PE 2 ** 78 **
-  _BV( 6 ), // PE 6 ** 79 **
-  _BV( 7 ), // PE 7 ** 80 **
-  _BV( 4 ), // PD 4 ** 81 **
-  _BV( 5 ), // PD 5 ** 82 **
-  _BV( 6 ), // PD 6 ** 83 **
-  _BV( 2 ), // PH 2 ** 84 **
-  _BV( 7 ), // PH 7 ** 85 **
+  _BV( 0 )  , // PE 0 ** 0 ** USART0_RX
+  _BV( 1 )  , // PE 1 ** 1 ** USART0_TX
+  _BV( 4 )  , // PE 4 ** 2 ** PWM2
+  _BV( 5 )  , // PE 5 ** 3 ** PWM3
+  _BV( 5 )  , // PG 5 ** 4 ** PWM4
+  _BV( 3 )  , // PE 3 ** 5 ** PWM5
+  _BV( 3 )  , // PH 3 ** 6 ** PWM6
+  _BV( 4 )  , // PH 4 ** 7 ** PWM7
+  _BV( 5 )  , // PH 5 ** 8 ** PWM8
+  _BV( 6 )  , // PH 6 ** 9 ** PWM9
+  _BV( 4 )  , // PB 4 ** 10 ** PWM10
+  _BV( 5 )  , // PB 5 ** 11 ** PWM11
+  _BV( 6 )  , // PB 6 ** 12 ** PWM12
+  _BV( 7 )  , // PB 7 ** 13 ** PWM13
+  _BV( 1 )  , // PJ 1 ** 14 ** USART3_TX
+  _BV( 0 )  , // PJ 0 ** 15 ** USART3_RX
+  _BV( 1 )  , // PH 1 ** 16 ** USART2_TX
+  _BV( 0 )  , // PH 0 ** 17 ** USART2_RX
+  _BV( 3 )  , // PD 3 ** 18 ** USART1_TX
+  _BV( 2 )  , // PD 2 ** 19 ** USART1_RX
+  _BV( 1 )  , // PD 1 ** 20 ** I2C_SDA
+  _BV( 0 )  , // PD 0 ** 21 ** I2C_SCL
+  _BV( 0 )  , // PA 0 ** 22 ** D22
+  _BV( 1 )  , // PA 1 ** 23 ** D23
+  _BV( 2 )  , // PA 2 ** 24 ** D24
+  _BV( 3 )  , // PA 3 ** 25 ** D25
+  _BV( 4 )  , // PA 4 ** 26 ** D26
+  _BV( 5 )  , // PA 5 ** 27 ** D27
+  _BV( 6 )  , // PA 6 ** 28 ** D28
+  _BV( 7 )  , // PA 7 ** 29 ** D29
+  _BV( 7 )  , // PC 7 ** 30 ** D30
+  _BV( 6 )  , // PC 6 ** 31 ** D31
+  _BV( 5 )  , // PC 5 ** 32 ** D32
+  _BV( 4 )  , // PC 4 ** 33 ** D33
+  _BV( 3 )  , // PC 3 ** 34 ** D34
+  _BV( 2 )  , // PC 2 ** 35 ** D35
+  _BV( 1 )  , // PC 1 ** 36 ** D36
+  _BV( 0 )  , // PC 0 ** 37 ** D37
+  _BV( 7 )  , // PD 7 ** 38 ** D38
+  _BV( 2 )  , // PG 2 ** 39 ** D39
+  _BV( 1 )  , // PG 1 ** 40 ** D40
+  _BV( 0 )  , // PG 0 ** 41 ** D41
+  _BV( 7 )  , // PL 7 ** 42 ** D42
+  _BV( 6 )  , // PL 6 ** 43 ** D43
+  _BV( 5 )  , // PL 5 ** 44 ** D44
+  _BV( 4 )  , // PL 4 ** 45 ** D45
+  _BV( 3 )  , // PL 3 ** 46 ** D46
+  _BV( 2 )  , // PL 2 ** 47 ** D47
+  _BV( 1 )  , // PL 1 ** 48 ** D48
+  _BV( 0 )  , // PL 0 ** 49 ** D49
+  _BV( 3 )  , // PB 3 ** 50 ** SPI_MISO
+  _BV( 2 )  , // PB 2 ** 51 ** SPI_MOSI
+  _BV( 1 )  , // PB 1 ** 52 ** SPI_SCK
+  _BV( 0 )  , // PB 0 ** 53 ** SPI_SS
+  _BV( 0 )  , // PF 0 ** 54 ** A0
+  _BV( 1 )  , // PF 1 ** 55 ** A1
+  _BV( 2 )  , // PF 2 ** 56 ** A2
+  _BV( 3 )  , // PF 3 ** 57 ** A3
+  _BV( 4 )  , // PF 4 ** 58 ** A4
+  _BV( 5 )  , // PF 5 ** 59 ** A5
+  _BV( 6 )  , // PF 6 ** 60 ** A6
+  _BV( 7 )  , // PF 7 ** 61 ** A7
+  _BV( 0 )  , // PK 0 ** 62 ** A8
+  _BV( 1 )  , // PK 1 ** 63 ** A9
+  _BV( 2 )  , // PK 2 ** 64 ** A10
+  _BV( 3 )  , // PK 3 ** 65 ** A11
+  _BV( 4 )  , // PK 4 ** 66 ** A12
+  _BV( 5 )  , // PK 5 ** 67 ** A13
+  _BV( 6 )  , // PK 6 ** 68 ** A14
+  _BV( 7 )  , // PK 7 ** 69 ** A15
+  _BV( 4 )  , // PG 4 ** 70 **
+  _BV( 3 )  , // PG 3 ** 71 **
+  _BV( 2 )  , // PJ 2 ** 72 **
+  _BV( 3 )  , // PJ 3 ** 73 **
+  _BV( 7 )  , // PJ 7 ** 74 **
+  _BV( 4 )  , // PJ 4 ** 75 **
+  _BV( 5 )  , // PJ 5 ** 76 **
+  _BV( 6 )  , // PJ 6 ** 77 **
+  _BV( 2 )  , // PE 2 ** 78 **
+  _BV( 6 )  , // PE 6 ** 79 **
+  _BV( 7 )  , // PE 7 ** 80 **
+  _BV( 4 )  , // PD 4 ** 81 **
+  _BV( 5 )  , // PD 5 ** 82 **
+  _BV( 6 )  , // PD 6 ** 83 **
+  _BV( 2 )  , // PH 2 ** 84 **
+  _BV( 7 )  , // PH 7 ** 85 **
 };
 
 #define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) )
@@ -234,86 +234,86 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
 const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = {
   // TIMERS
   // ------------------------
-  NOT_ON_TIMER, // PE 0 ** 0 ** USART0_RX
-  NOT_ON_TIMER, // PE 1 ** 1 ** USART0_TX
-  TIMER3B, // PE 4 ** 2 ** PWM2
-  TIMER3C, // PE 5 ** 3 ** PWM3
-  TIMER0B, // PG 5 ** 4 ** PWM4
-  TIMER3A, // PE 3 ** 5 ** PWM5
-  TIMER4A, // PH 3 ** 6 ** PWM6
-  TIMER4B, // PH 4 ** 7 ** PWM7
-  TIMER4C, // PH 5 ** 8 ** PWM8
-  TIMER2B, // PH 6 ** 9 ** PWM9
-  TIMER2A, // PB 4 ** 10 ** PWM10
-  TIMER1A, // PB 5 ** 11 ** PWM11
-  TIMER1B, // PB 6 ** 12 ** PWM12
-  TIMER0A, // PB 7 ** 13 ** PWM13
-  NOT_ON_TIMER, // PJ 1 ** 14 ** USART3_TX
-  NOT_ON_TIMER, // PJ 0 ** 15 ** USART3_RX
-  NOT_ON_TIMER, // PH 1 ** 16 ** USART2_TX
-  NOT_ON_TIMER, // PH 0 ** 17 ** USART2_RX
-  NOT_ON_TIMER, // PD 3 ** 18 ** USART1_TX
-  NOT_ON_TIMER, // PD 2 ** 19 ** USART1_RX
-  NOT_ON_TIMER, // PD 1 ** 20 ** I2C_SDA
-  NOT_ON_TIMER, // PD 0 ** 21 ** I2C_SCL
-  NOT_ON_TIMER, // PA 0 ** 22 ** D22
-  NOT_ON_TIMER, // PA 1 ** 23 ** D23
-  NOT_ON_TIMER, // PA 2 ** 24 ** D24
-  NOT_ON_TIMER, // PA 3 ** 25 ** D25
-  NOT_ON_TIMER, // PA 4 ** 26 ** D26
-  NOT_ON_TIMER, // PA 5 ** 27 ** D27
-  NOT_ON_TIMER, // PA 6 ** 28 ** D28
-  NOT_ON_TIMER, // PA 7 ** 29 ** D29
-  NOT_ON_TIMER, // PC 7 ** 30 ** D30
-  NOT_ON_TIMER, // PC 6 ** 31 ** D31
-  NOT_ON_TIMER, // PC 5 ** 32 ** D32
-  NOT_ON_TIMER, // PC 4 ** 33 ** D33
-  NOT_ON_TIMER, // PC 3 ** 34 ** D34
-  NOT_ON_TIMER, // PC 2 ** 35 ** D35
-  NOT_ON_TIMER, // PC 1 ** 36 ** D36
-  NOT_ON_TIMER, // PC 0 ** 37 ** D37
-  NOT_ON_TIMER, // PD 7 ** 38 ** D38
-  NOT_ON_TIMER, // PG 2 ** 39 ** D39
-  NOT_ON_TIMER, // PG 1 ** 40 ** D40
-  NOT_ON_TIMER, // PG 0 ** 41 ** D41
-  NOT_ON_TIMER, // PL 7 ** 42 ** D42
-  NOT_ON_TIMER, // PL 6 ** 43 ** D43
-  TIMER5C, // PL 5 ** 44 ** D44
-  TIMER5B, // PL 4 ** 45 ** D45
-  TIMER5A, // PL 3 ** 46 ** D46
-  NOT_ON_TIMER, // PL 2 ** 47 ** D47
-  NOT_ON_TIMER, // PL 1 ** 48 ** D48
-  NOT_ON_TIMER, // PL 0 ** 49 ** D49
-  NOT_ON_TIMER, // PB 3 ** 50 ** SPI_MISO
-  NOT_ON_TIMER, // PB 2 ** 51 ** SPI_MOSI
-  NOT_ON_TIMER, // PB 1 ** 52 ** SPI_SCK
-  NOT_ON_TIMER, // PB 0 ** 53 ** SPI_SS
-  NOT_ON_TIMER, // PF 0 ** 54 ** A0
-  NOT_ON_TIMER, // PF 1 ** 55 ** A1
-  NOT_ON_TIMER, // PF 2 ** 56 ** A2
-  NOT_ON_TIMER, // PF 3 ** 57 ** A3
-  NOT_ON_TIMER, // PF 4 ** 58 ** A4
-  NOT_ON_TIMER, // PF 5 ** 59 ** A5
-  NOT_ON_TIMER, // PF 6 ** 60 ** A6
-  NOT_ON_TIMER, // PF 7 ** 61 ** A7
-  NOT_ON_TIMER, // PK 0 ** 62 ** A8
-  NOT_ON_TIMER, // PK 1 ** 63 ** A9
-  NOT_ON_TIMER, // PK 2 ** 64 ** A10
-  NOT_ON_TIMER, // PK 3 ** 65 ** A11
-  NOT_ON_TIMER, // PK 4 ** 66 ** A12
-  NOT_ON_TIMER, // PK 5 ** 67 ** A13
-  NOT_ON_TIMER, // PK 6 ** 68 ** A14
-  NOT_ON_TIMER, // PK 7 ** 69 ** A15
-  NOT_ON_TIMER, // PG 4 ** 70 **
-  NOT_ON_TIMER, // PG 3 ** 71 **
-  NOT_ON_TIMER, // PJ 2 ** 72 **
-  NOT_ON_TIMER, // PJ 3 ** 73 **
-  NOT_ON_TIMER, // PJ 7 ** 74 **
-  NOT_ON_TIMER, // PJ 4 ** 75 **
-  NOT_ON_TIMER, // PJ 5 ** 76 **
-  NOT_ON_TIMER, // PJ 6 ** 77 **
-  NOT_ON_TIMER, // PE 2 ** 78 **
-  NOT_ON_TIMER, // PE 6 ** 79 **
+  NOT_ON_TIMER  , // PE 0 ** 0 ** USART0_RX
+  NOT_ON_TIMER  , // PE 1 ** 1 ** USART0_TX
+  TIMER3B , // PE 4 ** 2 ** PWM2
+  TIMER3C , // PE 5 ** 3 ** PWM3
+  TIMER0B , // PG 5 ** 4 ** PWM4
+  TIMER3A , // PE 3 ** 5 ** PWM5
+  TIMER4A , // PH 3 ** 6 ** PWM6
+  TIMER4B , // PH 4 ** 7 ** PWM7
+  TIMER4C , // PH 5 ** 8 ** PWM8
+  TIMER2B , // PH 6 ** 9 ** PWM9
+  TIMER2A , // PB 4 ** 10 ** PWM10
+  TIMER1A , // PB 5 ** 11 ** PWM11
+  TIMER1B , // PB 6 ** 12 ** PWM12
+  TIMER0A , // PB 7 ** 13 ** PWM13
+  NOT_ON_TIMER  , // PJ 1 ** 14 ** USART3_TX
+  NOT_ON_TIMER  , // PJ 0 ** 15 ** USART3_RX
+  NOT_ON_TIMER  , // PH 1 ** 16 ** USART2_TX
+  NOT_ON_TIMER  , // PH 0 ** 17 ** USART2_RX
+  NOT_ON_TIMER  , // PD 3 ** 18 ** USART1_TX
+  NOT_ON_TIMER  , // PD 2 ** 19 ** USART1_RX
+  NOT_ON_TIMER  , // PD 1 ** 20 ** I2C_SDA
+  NOT_ON_TIMER  , // PD 0 ** 21 ** I2C_SCL
+  NOT_ON_TIMER  , // PA 0 ** 22 ** D22
+  NOT_ON_TIMER  , // PA 1 ** 23 ** D23
+  NOT_ON_TIMER  , // PA 2 ** 24 ** D24
+  NOT_ON_TIMER  , // PA 3 ** 25 ** D25
+  NOT_ON_TIMER  , // PA 4 ** 26 ** D26
+  NOT_ON_TIMER  , // PA 5 ** 27 ** D27
+  NOT_ON_TIMER  , // PA 6 ** 28 ** D28
+  NOT_ON_TIMER  , // PA 7 ** 29 ** D29
+  NOT_ON_TIMER  , // PC 7 ** 30 ** D30
+  NOT_ON_TIMER  , // PC 6 ** 31 ** D31
+  NOT_ON_TIMER  , // PC 5 ** 32 ** D32
+  NOT_ON_TIMER  , // PC 4 ** 33 ** D33
+  NOT_ON_TIMER  , // PC 3 ** 34 ** D34
+  NOT_ON_TIMER  , // PC 2 ** 35 ** D35
+  NOT_ON_TIMER  , // PC 1 ** 36 ** D36
+  NOT_ON_TIMER  , // PC 0 ** 37 ** D37
+  NOT_ON_TIMER  , // PD 7 ** 38 ** D38
+  NOT_ON_TIMER  , // PG 2 ** 39 ** D39
+  NOT_ON_TIMER  , // PG 1 ** 40 ** D40
+  NOT_ON_TIMER  , // PG 0 ** 41 ** D41
+  NOT_ON_TIMER  , // PL 7 ** 42 ** D42
+  NOT_ON_TIMER  , // PL 6 ** 43 ** D43
+  TIMER5C , // PL 5 ** 44 ** D44
+  TIMER5B , // PL 4 ** 45 ** D45
+  TIMER5A , // PL 3 ** 46 ** D46
+  NOT_ON_TIMER  , // PL 2 ** 47 ** D47
+  NOT_ON_TIMER  , // PL 1 ** 48 ** D48
+  NOT_ON_TIMER  , // PL 0 ** 49 ** D49
+  NOT_ON_TIMER  , // PB 3 ** 50 ** SPI_MISO
+  NOT_ON_TIMER  , // PB 2 ** 51 ** SPI_MOSI
+  NOT_ON_TIMER  , // PB 1 ** 52 ** SPI_SCK
+  NOT_ON_TIMER  , // PB 0 ** 53 ** SPI_SS
+  NOT_ON_TIMER  , // PF 0 ** 54 ** A0
+  NOT_ON_TIMER  , // PF 1 ** 55 ** A1
+  NOT_ON_TIMER  , // PF 2 ** 56 ** A2
+  NOT_ON_TIMER  , // PF 3 ** 57 ** A3
+  NOT_ON_TIMER  , // PF 4 ** 58 ** A4
+  NOT_ON_TIMER  , // PF 5 ** 59 ** A5
+  NOT_ON_TIMER  , // PF 6 ** 60 ** A6
+  NOT_ON_TIMER  , // PF 7 ** 61 ** A7
+  NOT_ON_TIMER  , // PK 0 ** 62 ** A8
+  NOT_ON_TIMER  , // PK 1 ** 63 ** A9
+  NOT_ON_TIMER  , // PK 2 ** 64 ** A10
+  NOT_ON_TIMER  , // PK 3 ** 65 ** A11
+  NOT_ON_TIMER  , // PK 4 ** 66 ** A12
+  NOT_ON_TIMER  , // PK 5 ** 67 ** A13
+  NOT_ON_TIMER  , // PK 6 ** 68 ** A14
+  NOT_ON_TIMER  , // PK 7 ** 69 ** A15
+  NOT_ON_TIMER  , // PG 4 ** 70 **
+  NOT_ON_TIMER  , // PG 3 ** 71 **
+  NOT_ON_TIMER  , // PJ 2 ** 72 **
+  NOT_ON_TIMER  , // PJ 3 ** 73 **
+  NOT_ON_TIMER  , // PJ 7 ** 74 **
+  NOT_ON_TIMER  , // PJ 4 ** 75 **
+  NOT_ON_TIMER  , // PJ 5 ** 76 **
+  NOT_ON_TIMER  , // PJ 6 ** 77 **
+  NOT_ON_TIMER  , // PE 2 ** 78 **
+  NOT_ON_TIMER  , // PE 6 ** 79 **
 };
 
 #define digitalPinToTimer_plus_70(P) ( pgm_read_byte( digital_pin_to_timer_PGM_plus_70 + (P) ) )

Marlin/src/HAL/AVR/spi_pins.h

@@ -23,41 +23,43 @@
 
 /**
  * Define SPI Pins: SCK, MISO, MOSI, SS
- * Platform pins have parentheses, e.g., "(53)", so we cannot use them.
  */
 #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define _PIN_SPI_SCK  13
-  #define _PIN_SPI_MISO 12
-  #define _PIN_SPI_MOSI 11
-  #define _PIN_SPI_SS   10
+  #define AVR_SCK_PIN  13
+  #define AVR_MISO_PIN 12
+  #define AVR_MOSI_PIN 11
+  #define AVR_SS_PIN   10
 #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define _PIN_SPI_SCK  7
-  #define _PIN_SPI_MISO 6
-  #define _PIN_SPI_MOSI 5
-  #define _PIN_SPI_SS   4
+  #define AVR_SCK_PIN  7
+  #define AVR_MISO_PIN 6
+  #define AVR_MOSI_PIN 5
+  #define AVR_SS_PIN   4
 #elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define _PIN_SPI_SCK  52
-  #define _PIN_SPI_MISO 50
-  #define _PIN_SPI_MOSI 51
-  #define _PIN_SPI_SS   53
+  #define AVR_SCK_PIN  52
+  #define AVR_MISO_PIN 50
+  #define AVR_MOSI_PIN 51
+  #define AVR_SS_PIN   53
 #elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
-  #define _PIN_SPI_SCK  21
-  #define _PIN_SPI_MISO 23
-  #define _PIN_SPI_MOSI 22
-  #define _PIN_SPI_SS   20
+  #define AVR_SCK_PIN  21
+  #define AVR_MISO_PIN 23
+  #define AVR_MOSI_PIN 22
+  #define AVR_SS_PIN   20
 #elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define _PIN_SPI_SCK  10
-  #define _PIN_SPI_MISO 12
-  #define _PIN_SPI_MOSI 11
-  #define _PIN_SPI_SS   16
+  #define AVR_SCK_PIN  10
+  #define AVR_MISO_PIN 12
+  #define AVR_MOSI_PIN 11
+  #define AVR_SS_PIN   16
 #endif
 
 #ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  _PIN_SPI_SCK
+  #define SD_SCK_PIN  AVR_SCK_PIN
 #endif
 #ifndef SD_MISO_PIN
-  #define SD_MISO_PIN _PIN_SPI_MISO
+  #define SD_MISO_PIN AVR_MISO_PIN
 #endif
 #ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN _PIN_SPI_MOSI
+  #define SD_MOSI_PIN AVR_MOSI_PIN
+#endif
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -55,12 +55,12 @@
 
 #if defined(ARDUINO) && !defined(ARDUINO_ARCH_STM32) && !defined(ARDUINO_ARCH_SAM)
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if HAS_MARLINUI_U8GLIB
 
-#include "../../shared/Marduino.h"
-#include "../../shared/Delay.h"
+#include "../shared/Marduino.h"
+#include "../shared/Delay.h"
 
 #include <U8glib-HAL.h>
 
@@ -120,7 +120,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   U8G_ATOMIC_END();
 }
 
-#if U8G_SPI_USE_MODE_3
+#if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_0
@@ -143,9 +143,9 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
       break;
 
     case U8G_COM_MSG_CHIP_SELECT:
-      #if U8G_SPI_USE_MODE_3                                  // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                                        // SCK idle state needs to be set to the proper idle state before
-                                                              //  the next chip select goes active
+      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                         //   SCK idle state needs to be set to the proper idle state before
+                                               //   the next chip select goes active
           u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1);  // Set SCK to mode 3 idle state before CS goes active
           u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
         }

Marlin/src/HAL/DUE/HAL.cpp

@@ -48,7 +48,7 @@ uint16_t MarlinHAL::adc_result;
 
 void MarlinHAL::init() {
   #if HAS_MEDIA
-    OUT_WRITE(SD_SS_PIN, HIGH);  // Try to set SDSS inactive before any other SPI users start up
+    OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();          // Initialize the USB stack
   TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
@@ -102,10 +102,6 @@ void watchdogSetup() {
 
   #if ENABLED(USE_WATCHDOG)
 
-    #ifndef WATCHDOG_PIO_RESET
-      #define WATCHDOG_PIO_RESET
-    #endif
-
     // 4 seconds timeout
     uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
 
@@ -119,16 +115,15 @@ void watchdogSetup() {
       timeout = 0xFFF;
 
     // We want to enable the watchdog with the specified timeout
-    uint32_t value = (0
-      | WDT_MR_WDV(timeout)               // With the specified timeout
-      | WDT_MR_WDD(timeout)               // and no invalid write window
-      #if NONE(WATCHDOG_PIO_RESET, SAMV70, SAMV71, SAME70, SAMS70)
-        | WDT_MR_WDRPROC                  // WDT fault resets processor only with this flag.
-                                          // Omit to also reset the PIO controller.
-      #endif
-      | WDT_MR_WDDBGHLT                   // WDT stops in debug state.
-      | WDT_MR_WDIDLEHLT                  // WDT stops in idle state.
-    );
+    uint32_t value =
+      WDT_MR_WDV(timeout) |               // With the specified timeout
+      WDT_MR_WDD(timeout) |               // and no invalid write window
+    #if !(SAMV70 || SAMV71 || SAME70 || SAMS70)
+      WDT_MR_WDRPROC   |                  // WDT fault resets processor only - We want
+                                          // to keep PIO controller state
+    #endif
+      WDT_MR_WDDBGHLT  |                  // WDT stops in debug state.
+      WDT_MR_WDIDLEHLT;                   // WDT stops in idle state.
 
     #if ENABLED(WATCHDOG_RESET_MANUAL)
       // We enable the watchdog timer, but only for the interrupt.

Marlin/src/HAL/DUE/HAL.h

@@ -35,9 +35,67 @@
 
 #include <stdint.h>
 
-//
-// Serial Ports
-//
+#include "../../core/serial_hook.h"
+
+// ------------------------
+// Serial ports
+// ------------------------
+
+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
+
+#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
+  #define MYSERIAL1 customizedSerial1
+#elif WITHIN(SERIAL_PORT, 0, 3)
+  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
+#else
+  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+#endif
+
+#ifdef SERIAL_PORT_2
+  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL2 customizedSerial2
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
+    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
+  #else
+    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
+  #endif
+#endif
+
+#ifdef SERIAL_PORT_3
+  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL3 customizedSerial3
+  #elif WITHIN(SERIAL_PORT_3, 0, 3)
+    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
+  #else
+    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #else
+    #error "MMU2_SERIAL_PORT must be from 0 to 3."
+  #endif
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #else
+    #error "LCD_SERIAL_PORT must be from 0 to 3."
+  #endif
+#endif
 
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
@@ -69,7 +127,7 @@ typedef Servo hal_servo_t;
 #define HAL_ADC_RESOLUTION  10
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
 #endif
 
 //

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -208,8 +208,8 @@
       A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
       A("bfi %[bin],%[work],#0,#1")                /* Store read bit as the bit 0 */
 
-      : [bin]"+r"( bin ),
-        [work]"+r"( work )
+      : [bin]"+r"(bin),
+        [work]"+r"(work)
       : [bitband_miso_port]"r"( BITBAND_MISO_PORT ),
         [sck_mask]"r"( SCK_MASK ),
         [sck_port]"r"( SCK_PORT_PLUS30 )
@@ -350,7 +350,7 @@
   static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS(((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
     uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
     uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
@@ -412,10 +412,10 @@
       A("strb.w %[bin], [%[ptr]], #1")             /* Store read value into buffer, increment buffer pointer */
       A("bne.n loop%=")                            /* Repeat until done */
 
-      : [ptr]"+r"( ptr ),
-        [todo]"+r"( todo ),
-        [bin]"+r"( bin ),
-        [work]"+r"( work )
+      : [ptr]"+r"(ptr),
+        [todo]"+r"(todo),
+        [bin]"+r"(bin),
+        [work]"+r"(work)
       : [bitband_miso_port]"r"( BITBAND_MISO_PORT ),
         [sck_mask]"r"( SCK_MASK ),
         [sck_port]"r"( SCK_PORT_PLUS30 )
@@ -600,8 +600,9 @@
       OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
       OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
       OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
-      OUT_WRITE(SD_SS_PIN, HIGH);
-      WRITE(SD_SS_PIN, LOW);
+      WRITE(SD_SS_PIN, HIGH);
+
+      OUT_WRITE(SDSS, LOW);
 
       PIO_Configure(
         g_APinDescription[SPI_PIN].pPort,
@@ -766,7 +767,7 @@
 
       // Disable PIO on A26 and A27
       REG_PIOA_PDR = 0x0C000000;
-      OUT_WRITE(SD_SS_PIN, HIGH);
+      OUT_WRITE(SDSS, HIGH);
 
       // Reset SPI0 (from sam lib)
       SPI0->SPI_CR = SPI_CR_SPIDIS;

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -33,21 +33,6 @@
 #include "../../core/types.h"
 #include "../../core/serial_hook.h"
 
-typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
-typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
-typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
-extern DefaultSerial1 MSerial0;
-extern DefaultSerial2 MSerial1;
-extern DefaultSerial3 MSerial2;
-extern DefaultSerial4 MSerial3;
-
-#define SERIAL_INDEX_MIN 0
-#define SERIAL_INDEX_MAX 3
-#define EP_SERIAL_PORT(N) customizedSerial##N
-#define USB_SERIAL_PORT(N) customizedSerial##N
-#include "../shared/serial_ports.h"
-
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
 // location to which to write the next incoming character and rx_buffer_tail

Marlin/src/HAL/DUE/Servo.cpp

@@ -50,7 +50,7 @@
 static Flags<_Nbr_16timers> DisablePending; // ISR should disable the timer at the next timer reset
 
 // ------------------------
-// Interrupt handler for the TC0 channel 1.
+/// Interrupt handler for the TC0 channel 1.
 // ------------------------
 void Servo_Handler(const timer16_Sequence_t, Tc*, const uint8_t);
 

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #if ENABLED(FLASH_EEPROM_EMULATION)
 
@@ -132,7 +132,7 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curGroup = 0xFF;     // Current FLASH group
 
 #define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
-#include "../../../core/debug_out.h"
+#include "../../core/debug_out.h"
 
 static void ee_Dump(const int page, const void *data) {
 
@@ -291,7 +291,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
       uint32_t *p1 = (uint32_t*)addrflash;
       uint32_t *p2 = (uint32_t*)data;
       int count = 0;
-      for (i = 0; i < PageSize >> 2; i++) {
+      for (i =0; i<PageSize >> 2; i++) {
         if (p1[i] != p2[i]) {
           uint32_t delta = p1[i] ^ p2[i];
           while (delta) {
@@ -953,7 +953,7 @@ static void ee_Init() {
 
 /* PersistentStore -----------------------------------------------------------*/
 
-#include "../../shared/eeprom_api.h"
+#include "../shared/eeprom_api.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE 0x1000 // 4KB

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #if USE_WIRED_EEPROM
 
@@ -30,8 +30,8 @@
  * with simple implementations supplied by Marlin.
  */
 
-#include "../../shared/eeprom_if.h"
-#include "../../shared/eeprom_api.h"
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -64,7 +64,6 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
-  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -40,12 +40,11 @@
  * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
  */
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if MB(PRINTRBOARD_G2)
 
 #include "G2_PWM.h"
-#include "../../../module/stepper.h"
 
 #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
   #define G2_PWM_X 1
@@ -57,12 +56,16 @@
 #else
   #define G2_PWM_Y 0
 #endif
-#if HAS_MOTOR_CURRENT_PWM_Z
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
   #define G2_PWM_Z 1
 #else
   #define G2_PWM_Z 0
 #endif
-#define G2_PWM_E HAS_MOTOR_CURRENT_PWM_E
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
+  #define G2_PWM_E 1
+#else
+  #define G2_PWM_E 0
+#endif
 #define G2_MASK_X(V) (G2_PWM_X * (V))
 #define G2_MASK_Y(V) (G2_PWM_Y * (V))
 #define G2_MASK_Z(V) (G2_PWM_Z * (V))
@@ -77,22 +80,17 @@ PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
 
 void Stepper::digipot_init() {
 
-  #if G2_PWM_X
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, LOW);  // init pins
+  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
+    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
   #endif
-  #if G2_PWM_Y
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, LOW);
+  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
   #endif
   #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, LOW);
+    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
   #endif
   #if G2_PWM_E
-    #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-      OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, LOW);
-    #endif
-    #if PIN_EXISTS(MOTOR_CURRENT_PWM_E0)
-      OUT_WRITE(MOTOR_CURRENT_PWM_E0_PIN, LOW);
-    #endif
+    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
   #endif
 
   #define WPKEY          (0x50574D << 8) // “PWM” in ASCII

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -26,7 +26,10 @@
  * PR #7500. It is hardwired for the PRINTRBOARD_G2 Motor Current needs.
  */
 
-#include <stdint.h>
+#include "../../../inc/MarlinConfigPre.h"
+#include "../../../module/stepper.h"
+//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\module\stepper.h
+//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\G2_PWM.h
 
 #define PWM_PERIOD_US  100  // base repetition rate in micro seconds
 

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -68,15 +68,16 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
+#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
-  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
-  #if DISABLED(SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
-    #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
-  #endif
-  #if ENABLED(SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
+  #if ENABLED(TMC_USE_SW_SPI)
+    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
+    #endif
+  #elif ENABLED(SOFTWARE_SPI)
     #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
   #endif
-  #undef _IS_HW_SPI
 #endif
 
 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY

Marlin/src/HAL/DUE/pinsDebug.h

@@ -19,26 +19,13 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-#pragma once
 
 /**
- * Pins Debugging for DUE
- *
- *   - NUMBER_PINS_TOTAL
- *   - MULTI_NAME_PAD
- *   - getPinByIndex(index)
- *   - printPinNameByIndex(index)
- *   - getPinIsDigitalByIndex(index)
- *   - digitalPinToAnalogIndex(pin)
- *   - getValidPinMode(pin)
- *   - isValidPin(pin)
- *   - isAnalogPin(pin)
- *   - digitalRead_mod(pin)
- *   - pwm_status(pin)
- *   - printPinPWM(pin)
- *   - printPinPort(pin)
- *   - printPinNumber(pin)
- *   - printPinAnalog(pin)
+ * Support routines for Due
+ */
+
+/**
+ * Translation of routines & variables used by pinsDebug.h
  */
 
 #include "../shared/Marduino.h"
@@ -76,20 +63,20 @@
 
 #define NUMBER_PINS_TOTAL PINS_COUNT
 
-#define digitalRead_mod(P) extDigitalRead(P)  // AVR digitalRead disabled PWM before it read the pin
-#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
-#define getPinByIndex(x) pin_array[x].pin
-#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
-#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
-#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
-#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-#define pwm_status(P) (((g_pinStatus[P] & 0xF) == PIN_STATUS_PWM) && \
-                        ((g_APinDescription[P].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
+#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
+#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define GET_ARRAY_PIN(p) pin_array[p].pin
+#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
+#define VALID_PIN(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
+#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
+#define IS_ANALOG(P) WITHIN(P, char(analogInputToDigitalPin(0)), char(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+#define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
+                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin
 
-bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
+bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
   volatile Pio* port = g_APinDescription[pin].pPort;
   uint32_t mask = g_APinDescription[pin].ulPin;
   uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -98,14 +85,14 @@ bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
           || pwm_status(pin));
 }
 
-void printPinPWM(const int32_t pin) {
+void pwm_details(int32_t pin) {
   if (pwm_status(pin)) {
     uint32_t chan = g_APinDescription[pin].ulPWMChannel;
     SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
   }
 }
 
-void printPinPort(const pin_t) {}
+void print_port(const pin_t) {}
 
 /**
  * DUE Board pin   |  PORT  | Label

Marlin/src/HAL/DUE/spi_pins.h

@@ -24,38 +24,41 @@
 /**
  * Define SPI Pins: SCK, MISO, MOSI, SS
  *
- * Available chip select pins for HW SPI are 4 10 52 77 87
+ * Available chip select pins for HW SPI are 4 10 52 77
  */
-#if SD_SS_PIN == 4 || SD_SS_PIN == 10 || SD_SS_PIN == 52 || SD_SS_PIN == 77 || SD_SS_PIN == 87
-  #define SD_SCK_PIN      76
-  #define SD_MISO_PIN     74
-  #define SD_MOSI_PIN     75
-#endif
-
-#if SD_SS_PIN == 4
-  #define SPI_PIN         87
-  #define SPI_CHAN         1
-#elif SD_SS_PIN == 10
-  #define SPI_PIN         77
-  #define SPI_CHAN         0
-#elif SD_SS_PIN == 52
-  #define SPI_PIN         86
-  #define SPI_CHAN         2
-#elif SD_SS_PIN == 77
-  #define SPI_PIN         77
-  #define SPI_CHAN         0
-#elif SD_SS_PIN == 87
-  #define SPI_PIN         87
-  #define SPI_CHAN         1
+#if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
+  #if SDSS == 4
+    #define SPI_PIN         87
+    #define SPI_CHAN         1
+  #elif SDSS == 10
+    #define SPI_PIN         77
+    #define SPI_CHAN         0
+  #elif SDSS == 52
+    #define SPI_PIN         86
+    #define SPI_CHAN         2
+  #elif SDSS == 77
+    #define SPI_PIN         77
+    #define SPI_CHAN         0
+  #else
+    #define SPI_PIN         87
+    #define SPI_CHAN         1
+  #endif
+  #define SD_SCK_PIN        76
+  #define SD_MISO_PIN       74
+  #define SD_MOSI_PIN       75
 #else
+  // defaults
   #define SOFTWARE_SPI
   #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN    52
+    #define SD_SCK_PIN      52
   #endif
   #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN   50
+    #define SD_MISO_PIN     50
   #endif
   #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN   51
+    #define SD_MOSI_PIN     51
   #endif
 #endif
+
+/* A.28, A.29, B.21, C.26, C.29 */
+#define SD_SS_PIN         SDSS

Marlin/src/HAL/DUE/u8g/u8g_com_HAL_DUE_sw_spi.cpp

@@ -66,7 +66,7 @@
 
 #include <U8glib-HAL.h>
 
-#if U8G_SPI_USE_MODE_3
+#if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
 #else
   #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_0
@@ -96,15 +96,15 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
       break;
 
     case U8G_COM_MSG_CHIP_SELECT:
-      #if U8G_SPI_USE_MODE_3                        // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                              // SCK idle state needs to be set to the proper idle state before
-                                                    //  the next chip select goes active
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
+      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                        //   SCK idle state needs to be set to the proper idle state before
+                                               //   the next chip select goes active
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);  //set SCK to mode 3 idle state before CS goes active
           u8g_SetPILevel_DUE(u8g, U8G_PI_CS, LOW);
         }
         else {
           u8g_SetPILevel_DUE(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0); //set SCK to mode 0 idle state after CS goes inactive
         }
       #else
         u8g_SetPILevel_DUE(u8g, U8G_PI_CS, !arg_val);

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -11,7 +11,7 @@ if pioutil.is_pio_build():
 
     if current_OS == 'Windows':
 
-        env = pioutil.env
+        Import("env")
 
         # Use bossac.exe on Windows
         env.Replace(

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -63,8 +63,8 @@
 #include "compiler.h"
 #include "preprocessor.h"
 #ifdef FREERTOS_USED
-#include <FreeRTOS.h>
-#include <semphr.h>
+#include "FreeRTOS.h"
+#include "semphr.h"
 #endif
 #include "ctrl_access.h"
 

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp

@@ -18,29 +18,30 @@ extern "C" {
 void sd_mmc_spi_mem_init() {
 }
 
-inline bool media_ready() {
-  return card.isMounted() && card.isInserted() && !card.isFileOpen() && !card.isStillPrinting();
+Ctrl_status sd_mmc_spi_test_unit_ready() {
+  #ifdef DISABLE_DUE_SD_MMC
+    return CTRL_NO_PRESENT;
+  #endif
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
+  return CTRL_GOOD;
+}
+
+// NOTE: This function is defined as returning the address of the last block
+// in the card, which is cardSize() - 1
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
+  *nb_sector = card.diskIODriver()->cardSize() - 1;
+  return CTRL_GOOD;
 }
 
 bool sd_mmc_spi_unload(bool) { return true; }
 
 bool sd_mmc_spi_wr_protect() { return false; }
 
-bool sd_mmc_spi_removal() { return !media_ready(); }
-
-Ctrl_status sd_mmc_spi_test_unit_ready() {
-  #if ENABLED(DISABLE_DUE_SD_MMC)
-    return CTRL_NO_PRESENT;
-  #endif
-  return sd_mmc_spi_removal() ? CTRL_NO_PRESENT : CTRL_GOOD;
-}
-
-// NOTE: This function is defined as returning the address of the last block
-// in the card, which is cardSize() - 1
-Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
-  *nb_sector = card.diskIODriver()->cardSize() - 1;
-  return CTRL_GOOD;
+bool sd_mmc_spi_removal() {
+  return (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted());
 }
 
 #if ACCESS_USB == true
@@ -57,11 +58,11 @@ uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
 // #define DEBUG_MMC
 
 Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
-  #if ENABLED(DISABLE_DUE_SD_MMC)
+  #ifdef DISABLE_DUE_SD_MMC
     return CTRL_NO_PRESENT;
   #endif
-
-  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
   {
@@ -97,11 +98,11 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
 }
 
 Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
-  #if ENABLED(DISABLE_DUE_SD_MMC)
+  #ifdef DISABLE_DUE_SD_MMC
     return CTRL_NO_PRESENT;
   #endif
-
-  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
   {

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h

@@ -74,7 +74,7 @@
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
 //!/
-void sd_mmc_spi_mem_init();
+extern void           sd_mmc_spi_mem_init(void);
 
 //!
 //! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
@@ -87,7 +87,7 @@ void sd_mmc_spi_mem_init();
 //!   Media not present    ->    CTRL_NO_PRESENT
 //!   Media has changed    ->    CTRL_BUSY
 //!/
-Ctrl_status sd_mmc_spi_test_unit_ready();
+extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);
 
 //!
 //! @brief This function gives the address of the last valid sector.
@@ -98,7 +98,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready();
 //!   Media ready          ->  CTRL_GOOD
 //!   Media not present    ->  CTRL_NO_PRESENT
 //!/
-Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
+extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);
 
 /*! \brief Unload/Load the SD/MMC card selected
  *
@@ -109,7 +109,7 @@ Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
  *
  * \return \c true if unload/load done success.
  */
-bool sd_mmc_spi_unload(bool unload);
+extern bool sd_mmc_spi_unload(bool unload);
 
 //!
 //! @brief This function returns the write protected status of the memory.
@@ -120,14 +120,14 @@ bool sd_mmc_spi_unload(bool unload);
 //!
 //! @return false  -> the memory is not write-protected (always)
 //!/
-bool sd_mmc_spi_wr_protect();
+extern bool           sd_mmc_spi_wr_protect(void);
 
 //!
 //! @brief This function tells if the memory has been removed or not.
 //!
 //! @return false  -> The memory isn't removed
 //!
-bool sd_mmc_spi_removal();
+extern bool           sd_mmc_spi_removal(void);
 
 //---- ACCESS DATA FUNCTIONS ----
 
@@ -147,7 +147,7 @@ bool sd_mmc_spi_removal();
 //!   It is ready    ->    CTRL_GOOD
 //!   A error occur  ->    CTRL_FAIL
 //!
-Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
+extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 
 //! This function initializes the SD/MMC memory for a write operation
 //!
@@ -161,7 +161,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 //!   It is ready    ->    CTRL_GOOD
 //!   An error occurs  ->    CTRL_FAIL
 //!
-Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
+extern Ctrl_status    sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
 
 #endif // #if ACCESS_USB == true
 

Marlin/src/HAL/ESP32/HAL.cpp

@@ -34,13 +34,13 @@
 
 #if ENABLED(WIFISUPPORT)
   #include <ESPAsyncWebServer.h>
-  #include "wifi/wifi.h"
+  #include "wifi.h"
   #if ENABLED(OTASUPPORT)
-    #include "wifi/ota.h"
+    #include "ota.h"
   #endif
   #if ENABLED(WEBSUPPORT)
-    #include "wifi/spiffs.h"
-    #include "wifi/web.h"
+    #include "spiffs.h"
+    #include "web.h"
   #endif
 #endif
 
@@ -175,6 +175,8 @@ uint8_t MarlinHAL::get_reset_source() { return rtc_get_reset_reason(1); }
 
 void MarlinHAL::reboot() { ESP.restart(); }
 
+void _delay_ms(const int ms) { delay(ms); }
+
 // return free memory between end of heap (or end bss) and whatever is current
 int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 
@@ -207,17 +209,16 @@ int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 // ADC
 // ------------------------
 
-// https://docs.espressif.com/projects/esp-idf/en/release-v4.4/esp32/api-reference/peripherals/adc.html
+#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
+
 adc1_channel_t get_channel(int pin) {
   switch (pin) {
-    case 39: return ADC1_CHANNEL_3;
-    case 36: return ADC1_CHANNEL_0;
-    case 35: return ADC1_CHANNEL_7;
-    case 34: return ADC1_CHANNEL_6;
-    case 33: return ADC1_CHANNEL_5;
-    case 32: return ADC1_CHANNEL_4;
-    case 37: return ADC1_CHANNEL_1;
-    case 38: return ADC1_CHANNEL_2;
+    case 39: return ADC1_CHANNEL(39);
+    case 36: return ADC1_CHANNEL(36);
+    case 35: return ADC1_CHANNEL(35);
+    case 34: return ADC1_CHANNEL(34);
+    case 33: return ADC1_CHANNEL(33);
+    case 32: return ADC1_CHANNEL(32);
   }
   return ADC1_CHANNEL_MAX;
 }

Marlin/src/HAL/ESP32/HAL.h

@@ -37,11 +37,11 @@
 #include "i2s.h"
 
 #if ENABLED(WIFISUPPORT)
-  #include "wifi/WebSocketSerial.h"
+  #include "WebSocketSerial.h"
 #endif
 
 #if ENABLED(ESP3D_WIFISUPPORT)
-  #include <esp3dlib.h>
+  #include "esp3dlib.h"
 #endif
 
 #include "FlushableHardwareSerial.h"
@@ -165,6 +165,8 @@ int freeMemory();
 
 #pragma GCC diagnostic pop
 
+void _delay_ms(const int ms);
+
 // ------------------------
 // MarlinHAL Class
 // ------------------------
@@ -192,7 +194,7 @@ public:
   static void isr_on()  { if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock); }
   static void isr_off() { portENTER_CRITICAL(&spinlock); }
 
-  static void delay_ms(const int ms) { delay(ms); }
+  static void delay_ms(const int ms) { _delay_ms(ms); }
 
   // Tasks, called from idle()
   static void idletask();

Marlin/src/HAL/ESP32/WebSocketSerial.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(WIFISUPPORT)
 

Marlin/src/HAL/ESP32/WebSocketSerial.h

@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#include "../../../inc/MarlinConfig.h"
-#include "../../../core/serial_hook.h"
+#include "../../inc/MarlinConfig.h"
+#include "../../core/serial_hook.h"
 
 #include <Stream.h>
 

Marlin/src/HAL/ESP32/endstop_interrupts.h

@@ -59,7 +59,6 @@ void setup_endstop_interrupts() {
   TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
   TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
   TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
-  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
   TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
   TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
   TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));

Marlin/src/HAL/ESP32/fastio.h

@@ -37,10 +37,6 @@
 // Set pin as output
 #define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)
 
-// TODO: Store set modes in an array and use those to get the mode
-#define _IS_OUTPUT(IO)           true
-#define _IS_INPUT(IO)            true
-
 // Set pin as input with pullup mode
 #define _PULLUP(IO, v)          pinMode(IO, v ? INPUT_PULLUP : INPUT)
 
@@ -74,9 +70,6 @@
 // Set pin as output and init
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
 
-#define IS_OUTPUT(IO)            _IS_OUTPUT(IO)
-#define IS_INPUT(IO)             _IS_INPUT(IO)
-
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)      digitalRead(IO)
 #define extDigitalWrite(IO,V)   digitalWrite(IO,V)

Marlin/src/HAL/ESP32/i2s.cpp

@@ -145,14 +145,14 @@ static void IRAM_ATTR i2s_intr_handler_default(void *arg) {
 void stepperTask(void *parameter) {
   uint32_t nextMainISR = 0;
   #if ENABLED(LIN_ADVANCE)
-    uint32_t nextAdvanceISR = stepper.LA_ADV_NEVER;
+    uint32_t nextAdvanceISR = Stepper::LA_ADV_NEVER;
   #endif
 
   for (;;) {
     xQueueReceive(dma.queue, &dma.current, portMAX_DELAY);
     dma.rw_pos = 0;
 
-    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.active);
+    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.mode);
 
     while (dma.rw_pos < DMA_SAMPLE_COUNT) {
 
@@ -167,13 +167,13 @@ void stepperTask(void *parameter) {
 
       if (!using_ftMotion) {
         if (!nextMainISR) {
-          stepper.pulse_phase_isr();
-          nextMainISR = stepper.block_phase_isr();
+          Stepper::pulse_phase_isr();
+          nextMainISR = Stepper::block_phase_isr();
         }
         #if ENABLED(LIN_ADVANCE)
           else if (!nextAdvanceISR) {
-            stepper.advance_isr();
-            nextAdvanceISR = stepper.la_interval;
+            Stepper::advance_isr();
+            nextAdvanceISR = Stepper::la_interval;
           }
         #endif
         else
@@ -182,10 +182,10 @@ void stepperTask(void *parameter) {
         nextMainISR--;
 
         #if ENABLED(LIN_ADVANCE)
-          if (nextAdvanceISR == stepper.LA_ADV_NEVER)
-            nextAdvanceISR = stepper.la_interval;
+          if (nextAdvanceISR == Stepper::LA_ADV_NEVER)
+            nextAdvanceISR = Stepper::la_interval;
 
-          if (nextAdvanceISR && nextAdvanceISR != stepper.LA_ADV_NEVER)
+          if (nextAdvanceISR && nextAdvanceISR != Stepper::LA_ADV_NEVER)
             nextAdvanceISR--;
         #endif
       }

Marlin/src/HAL/ESP32/ota.cpp

@@ -22,15 +22,11 @@
 
 #ifdef ARDUINO_ARCH_ESP32
 
-#include <WiFi.h>
-
-#undef ENABLED
-#undef DISABLED
-
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, OTASUPPORT)
 
+#include <WiFi.h>
 #include <ESPmDNS.h>
 #include <WiFiUdp.h>
 #include <ArduinoOTA.h>

Marlin/src/HAL/ESP32/pinsDebug.h

@@ -1,71 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#error "PINS_DEBUGGING is not yet supported for ESP32!"
-
-/**
- * Pins Debugging for ESP32
- *
- *   - NUMBER_PINS_TOTAL
- *   - MULTI_NAME_PAD
- *   - getPinByIndex(index)
- *   - printPinNameByIndex(index)
- *   - getPinIsDigitalByIndex(index)
- *   - digitalPinToAnalogIndex(pin)
- *   - getValidPinMode(pin)
- *   - isValidPin(pin)
- *   - isAnalogPin(pin)
- *   - digitalRead_mod(pin)
- *   - pwm_status(pin)
- *   - printPinPWM(pin)
- *   - printPinPort(pin)
- *   - printPinNumber(pin)
- *   - printPinAnalog(pin)
- */
-
-#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
-
-#define digitalRead_mod(P) extDigitalRead(P)
-#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
-#define getPinByIndex(x) pin_array[x].pin
-#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
-#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
-#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
-#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-bool pwm_status(const pin_t) { return false; }
-
-void printPinPort(const pin_t) {}
-
-static bool getValidPinMode(const pin_t pin) {
-  return isValidPin(pin) && !IS_INPUT(pin);
-}
-
-void printPinPWM(const int32_t pin) {
-  if (pwm_status(pin)) {
-    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
-    //SERIAL_ECHOPGM("PWM = ", duty);
-  }
-}

Marlin/src/HAL/ESP32/spi_pins.h

@@ -21,16 +21,7 @@
  */
 #pragma once
 
-#define PIN_SPI_SCK  18
-#define PIN_SPI_MISO 19
-#define PIN_SPI_MOSI 23
-
-#ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  PIN_SPI_SCK
-#endif
-#ifndef SD_MISO_PIN
-  #define SD_MISO_PIN PIN_SPI_MISO
-#endif
-#ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN PIN_SPI_MOSI
-#endif
+#define SD_SS_PIN   SDSS
+#define SD_SCK_PIN  18
+#define SD_MISO_PIN 19
+#define SD_MOSI_PIN 23

Marlin/src/HAL/ESP32/spiffs.cpp

@@ -21,11 +21,11 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, WEBSUPPORT)
 
-#include "../../../core/serial.h"
+#include "../../core/serial.h"
 
 #include <FS.h>
 #include <SPIFFS.h>

Marlin/src/HAL/ESP32/timers.cpp

@@ -90,7 +90,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
   config.counter_en  = TIMER_PAUSE;
   config.alarm_en    = TIMER_ALARM_EN;
   config.intr_type   = TIMER_INTR_LEVEL;
-  config.auto_reload = TIMER_AUTORELOAD_EN;
+  config.auto_reload = true;
 
   // Select and initialize the timer
   timer_init(timer.group, timer.idx, &config);

Marlin/src/HAL/ESP32/timers.h

@@ -53,11 +53,12 @@ typedef uint64_t hal_timer_t;
 #if ENABLED(I2S_STEPPER_STREAM)
   #define STEPPER_TIMER_PRESCALE     1
   #define STEPPER_TIMER_RATE         250000                           // 250khz, 4µs pulses of i2s word clock
+  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
 #else
   #define STEPPER_TIMER_PRESCALE     40
   #define STEPPER_TIMER_RATE         ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
+  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)              // stepper timer ticks per µs
 #endif
-#define STEPPER_TIMER_TICKS_PER_US   ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
 
 #define STEP_TIMER_MIN_INTERVAL   8 // minimum time in µs between stepper interrupts
 

Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp

@@ -35,7 +35,7 @@
 #if HAS_MEDIA
   #include "../../sd/cardreader.h"
   #if ENABLED(ESP3D_WIFISUPPORT)
-    #include <sd_ESP32.h>
+    #include "sd_ESP32.h"
   #endif
 #endif
 

Marlin/src/HAL/ESP32/web.cpp

@@ -21,11 +21,11 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, WEBSUPPORT)
 
-#include "../../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfig.h"
 
 #undef DISABLED  // esp32-hal-gpio.h
 #include <SPIFFS.h>

Marlin/src/HAL/ESP32/wifi.cpp

@@ -21,12 +21,11 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../../inc/MarlinConfigPre.h"
+#include "../../core/serial.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(WIFISUPPORT)
 
-#include "../../../core/serial.h"
-
 #include <WiFi.h>
 #include <ESPmDNS.h>
 #include <ESPAsyncWebServer.h>

Marlin/src/HAL/GD32_MFL/HAL.cpp

@@ -1,120 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-#include "../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../inc/MarlinConfig.h"
-#include "../shared/Delay.h"
-
-uint16_t MarlinHAL::adc_result;
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-  extern void install_min_serial();
-#endif
-
-#if ENABLED(MARLIN_DEV_MODE)
-  // Dump the clock frequencies of the system, AHB, APB1, APB2, and F_CPU.
-  static inline void HAL_clock_frequencies_dump() {
-    auto& rcuInstance = rcu::RCU::get_instance();
-    uint32_t freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_SYS);
-    SERIAL_ECHOPGM("\nSYSTEM_CLOCK=", freq);
-    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_AHB);
-    SERIAL_ECHOPGM("\nABH_CLOCK=", freq);
-    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_APB1);
-    SERIAL_ECHOPGM("\nAPB1_CLOCK=", freq);
-    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_APB2);
-    SERIAL_ECHOPGM("\nAPB2_CLOCK=", freq,
-    "\nF_CPU=", F_CPU);
-    // Done
-    SERIAL_ECHOPGM("\n--\n");
-  }
-#endif  // MARLIN_DEV_MODE
-
-// Initializes the Marlin HAL
-void MarlinHAL::init() {
-  constexpr unsigned int cpuFreq = F_CPU;
-  UNUSED(cpuFreq);
-
-#if PIN_EXISTS(LED)
-  OUT_WRITE(LED_PIN, LOW);
-#endif
-
-  SetTimerInterruptPriorities();
-
-  // Print clock frequencies to host serial
-  TERN_(MARLIN_DEV_MODE, HAL_clock_frequencies_dump());
-
-  // Register min serial
-  TERN_(POSTMORTEM_DEBUGGING, install_min_serial());
-}
-
-// Returns the reset source based on the flags set in the RCU module
-uint8_t MarlinHAL::get_reset_source() {
-  return
-    (RCU_I.get_flag(rcu::Status_Flags::FLAG_FWDGTRST)) ? RST_WATCHDOG :
-    (RCU_I.get_flag(rcu::Status_Flags::FLAG_SWRST)) ? RST_SOFTWARE :
-    (RCU_I.get_flag(rcu::Status_Flags::FLAG_EPRST)) ? RST_EXTERNAL :
-    (RCU_I.get_flag(rcu::Status_Flags::FLAG_PORRST)) ? RST_POWER_ON :
-    (RCU_I.get_flag(rcu::Status_Flags::FLAG_LPRST)) ? RST_BROWN_OUT :
-    0;
-}
-
-// Returns the amount of free memory available in bytes
-int MarlinHAL::freeMemory() {
-  volatile char top;
-  return &top - reinterpret_cast<char*>(_sbrk(0));
-}
-
-// Watchdog Timer
-#if ENABLED(USE_WATCHDOG)
-  #define WDT_TIMEOUT_US  TERN(WATCHDOG_DURATION_8S, 8000000, 4000000)  // 4 or 8 second timeout
-
-  #include <FWatchdogTimer.h>
-
-  FWatchdogTimer& watchdogTimer = FWatchdogTimer::get_instance();
-
-  // Initializes the watchdog timer
-  void MarlinHAL::watchdog_init() {
-    IF_DISABLED(DISABLE_WATCHDOG_INIT, watchdogTimer.begin(WDT_TIMEOUT_US));
-  }
-
-  // Refreshes the watchdog timer to prevent system reset
-  void MarlinHAL::watchdog_refresh() {
-    watchdogTimer.reload();
-    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
-      TOGGLE(LED_PIN);  // Heartbeat indicator
-    #endif
-  }
-#endif
-
-extern "C" {
-  extern unsigned int _ebss;  // End of bss section
-}
-
-// Resets the system to initiate a firmware flash.
-WEAK void flashFirmware(const int16_t) {
-  hal.reboot();
-}
-
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/HAL.h

@@ -1,160 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#define CPU_32_BIT
-
-#include "../../core/macros.h"
-#include "../shared/Marduino.h"
-#include "../shared/math_32bit.h"
-#include "../shared/HAL_SPI.h"
-
-#include "temp_soc.h"
-#include "fastio.h"
-#include "Servo.h"
-
-#include "../../inc/MarlinConfigPre.h"
-
-#include <stdint.h>
-#include <GPIO.hpp>
-#include <AFIO.hpp>
-
-// Default graphical display delays
-#define CPU_ST7920_DELAY_1 300
-#define CPU_ST7920_DELAY_2  40
-#define CPU_ST7920_DELAY_3 340
-
-// Serial Ports
-#include "MarlinSerial.h"
-
-// Interrupts
-#define CRITICAL_SECTION_START()  const bool irqon = !__get_PRIMASK(); __disable_irq()
-#define CRITICAL_SECTION_END()    if (irqon) __enable_irq()
-
-#define cli() __disable_irq()
-#define sei() __enable_irq()
-
-// Alias of __bss_end__
-#define __bss_end __bss_end__
-
-// Types
-typedef double isr_float_t; // FPU ops are used for single-precision, so use double for ISRs.
-typedef uint8_t pin_t;      // Parity with mfl platform
-
-// Servo
-class libServo;
-typedef libServo hal_servo_t;
-#define PAUSE_SERVO_OUTPUT()  libServo::pause_all_servos()
-#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
-
-// Debugging
-#define JTAG_DISABLE()    AFIO_I.set_remap(gpio::Pin_Remap_Select::SWJ_DP_ONLY_REMAP)
-#define JTAGSWD_DISABLE() AFIO_I.set_remap(gpio::Pin_Remap_Select::SWJ_ALL_DISABLED_REMAP)
-#define JTAGSWD_RESET()   AFIO_I.set_remap(gpio::Pin_Remap_Select::FULL_SWJ_REMAP)
-
-// ADC
-#ifdef ADC_RESOLUTION
-  #define HAL_ADC_RESOLUTION  ADC_RESOLUTION
-#else
-  #define HAL_ADC_RESOLUTION  12
-#endif
-
-#define HAL_ADC_VREF_MV   3300
-
-// Disable Marlin's software oversampling.
-// The MFL framework uses 16x hardware oversampling by default
-#ifdef GD32F303RE
-  #define HAL_ADC_FILTERED
-#endif
-
-#define GET_PIN_MAP_PIN(index)        index
-#define GET_PIN_MAP_INDEX(pin)        pin
-#define PARSED_PIN_INDEX(code, dval)  parser.intval(code, dval)
-
-#ifndef PLATFORM_M997_SUPPORT
-  #define PLATFORM_M997_SUPPORT
-#endif
-
-void flashFirmware(const int16_t);
-
-#define HAL_CAN_SET_PWM_FREQ    // This HAL supports PWM Frequency adjustment
-
-extern "C" char* _sbrk(int incr);
-extern "C" char* dtostrf(double val, signed char width, unsigned char prec, char* sout);
-
-// MarlinHAL Class
-class MarlinHAL {
-public:
-  // Before setup()
-  MarlinHAL() {}
-
-  // Watchdog
-  static void watchdog_init()    IF_DISABLED(USE_WATCHDOG, {});
-  static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
-
-  static void init();                             // called early in setup()
-  static void init_board() {}                     // called less early in setup()
-  static void reboot() { NVIC_SystemReset(); }    // restart the firmware from 0x0
-
-  // Interrupts
-  static bool isr_state() { return !__get_PRIMASK(); }
-  static void isr_on() { sei(); }
-  static void isr_off() { cli(); }
-  static void delay_ms(const int ms) { delay(ms); }
-
-  // Tasks called from idle()
-  static void idletask() {}
-
-  // Reset
-  static uint8_t get_reset_source();
-  static void clear_reset_source() { RCU_I.clear_all_reset_flags(); }
-
-  // Free SRAM
-  static int freeMemory();
-
-  // ADC methods
-  static uint16_t adc_result;
-
-  // Called by Temperature::init once at startup
-  static void adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); }
-
-  // Called by Temperature::init for each sensor at startup
-  static void adc_enable(const pin_t pin) { pinMode(pin, INPUT); }
-
-  // Called from Temperature::isr to start ADC sampling on the given pin
-  static void adc_start(const pin_t pin) { adc_result = static_cast<uint16_t>(analogRead(pin)); }
-
-  // Check if ADC is ready for reading
-  static bool adc_ready() { return true; }
-
-  // Current value of the ADC register
-  static uint16_t adc_value() { return adc_result; }
-
-  // Set the PWM duty cycle for the pin to the given value.
-  // Optionally invert the duty cycle [default = false]
-  // Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255]
-  static void set_pwm_duty(const pin_t pin, const uint16_t value, const uint16_t scale = 255U, const bool invert = false);
-
-  // Set the frequency of the timer for the given pin.
-  // All Timer PWM pins run at the same frequency.
-  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
-};

Marlin/src/HAL/GD32_MFL/MarlinSPI.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <SPI.h>
-
-using MarlinSPI = SPIClass;

Marlin/src/HAL/GD32_MFL/MarlinSerial.cpp

@@ -1,97 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-#include "../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../inc/MarlinConfig.h"
-#include "MarlinSerial.h"
-
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-
-using namespace arduino;
-
-MarlinSerial& MarlinSerial::get_instance(usart::USART_Base Base, pin_size_t rxPin, pin_size_t txPin) {
-  UsartSerial& serial = UsartSerial::get_instance(Base, rxPin, txPin);
-  return *reinterpret_cast<MarlinSerial*>(&serial);
-}
-
-#if USING_HW_SERIAL0
-  MSerialT MSerial0(true, MarlinSerial::get_instance(usart::USART_Base::USART0_BASE, NO_PIN, NO_PIN));
-#endif
-#if USING_HW_SERIAL1
-  MSerialT MSerial1(true, MarlinSerial::get_instance(usart::USART_Base::USART1_BASE, NO_PIN, NO_PIN));
-#endif
-#if USING_HW_SERIAL2
-  MSerialT MSerial2(true, MarlinSerial::get_instance(usart::USART_Base::USART2_BASE, NO_PIN, NO_PIN));
-#endif
-#if USING_HW_SERIAL3
-  MSerialT MSerial3(true, MarlinSerial::get_instance(usart::USART_Base::UART3_BASE, NO_PIN, NO_PIN));
-#endif
-#if USING_HW_SERIAL4
-  MSerialT MSerial4(true, MarlinSerial::get_instance(usart::USART_Base::UART4_BASE, NO_PIN, NO_PIN));
-#endif
-
-#if ENABLED(EMERGENCY_PARSER)
-  // This callback needs to access the specific MarlinSerial instance
-  // We'll use a static pointer to track the current instance
-  static MarlinSerial* current_serial_instance = nullptr;
-
-  static void emergency_callback() {
-    if (!current_serial_instance) return;
-    const uint8_t last_data = current_serial_instance->get_last_data();
-    emergency_parser.update(current_serial_instance->emergency_state, last_data);
-  }
-
-  void MarlinSerial::register_emergency_callback(void (*callback)()) {
-    usart_.register_interrupt_callback(usart::Interrupt_Type::INTR_RBNEIE, callback);
-  }
-#endif
-
-void MarlinSerial::begin(unsigned long baudrate, uint16_t config) {
-  UsartSerial::begin(baudrate, config, ENABLED(SERIAL_DMA));
-  #if ENABLED(EMERGENCY_PARSER) && DISABLED(SERIAL_DMA)
-    current_serial_instance = this;
-    register_emergency_callback(emergency_callback);
-  #endif
-}
-
-void MarlinSerial::updateRxDmaBuffer() {
-  #if ENABLED(EMERGENCY_PARSER)
-    // Get the number of bytes available in the receive buffer
-    const size_t available_bytes = usart_.available_for_read(true);
-
-    // Process only the available data
-    for (size_t i = 0; i < available_bytes; ++i) {
-      uint8_t data;
-      if (usart_.read_rx_buffer(data))
-        emergency_parser.update(emergency_state, data);
-    }
-  #endif
-  // Call the base class implementation to handle any additional updates
-  UsartSerial::updateRxDmaBuffer();
-}
-
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/MarlinSerial.h

@@ -1,75 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../../inc/MarlinConfigPre.h"
-
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-
-#include <UsartSerial.hpp>
-
-#include "../../core/serial_hook.h"
-
-#define SERIAL_INDEX_MIN 0
-#define SERIAL_INDEX_MAX 4
-
-#include "../shared/serial_ports.h"
-
-#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
-  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
-#endif
-
-using namespace arduino;
-
-struct MarlinSerial : public UsartSerial {
-  static MarlinSerial& get_instance(usart::USART_Base Base, pin_size_t rxPin = NO_PIN, pin_size_t txPin = NO_PIN);
-
-  void begin(unsigned long baudrate, uint16_t config);
-  inline void begin(unsigned long baudrate) { begin(baudrate, SERIAL_8N1); }
-  void updateRxDmaBuffer();
-
-  #if DISABLED(SERIAL_DMA)
-    FORCE_INLINE static uint8_t buffer_overruns() { return 0; }
-  #endif
-
-  #if ENABLED(EMERGENCY_PARSER)
-    EmergencyParser::State emergency_state;
-
-    // Accessor method to get the last received byte
-    uint8_t get_last_data() { return usart_.get_last_data(); }
-
-    // Register the emergency callback
-    void register_emergency_callback(void (*callback)());
-  #endif
-
-protected:
-  using UsartSerial::UsartSerial;
-};
-
-typedef Serial1Class<MarlinSerial> MSerialT;
-extern MSerialT MSerial0;
-extern MSerialT MSerial1;
-extern MSerialT MSerial2;
-extern MSerialT MSerial3;
-extern MSerialT MSerial4;

Marlin/src/HAL/GD32_MFL/MinSerial.cpp

@@ -1,163 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#include "../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../inc/MarlinConfigPre.h"
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-#include "../shared/MinSerial.h"
-
-// Base addresses for USART peripherals
-static constexpr uintptr_t USART_base[] = {
-  0x40013800, // USART0
-  0x40004400, // USART1
-  0x40004800, // USART2
-  0x40004C00, // UART3
-  0x40005000  // UART4
-};
-
-// Register offsets
-static constexpr uint32_t STAT0_OFFSET = 0x00U;
-static constexpr uint32_t DATA_OFFSET = 0x04U;
-static constexpr uint32_t BAUD_OFFSET = 0x08U;
-static constexpr uint32_t CTL0_OFFSET = 0x0CU;
-static constexpr uint32_t CTL1_OFFSET = 0x14U;
-
-// Bit positions
-static constexpr uint32_t TBE_BIT = 7;
-static constexpr uint32_t TEN_BIT = 3;
-static constexpr uint32_t UEN_BIT = 13;
-
-// NVIC interrupt numbers for USART
-static constexpr int nvicUART[] = { 37, 38, 39, 52, 53 };
-
-// RCU PCLK values for USART
-static constexpr rcu::RCU_PCLK clockRegs[] = {
-  rcu::RCU_PCLK::PCLK_USART0,
-  rcu::RCU_PCLK::PCLK_USART1,
-  rcu::RCU_PCLK::PCLK_USART2,
-  rcu::RCU_PCLK::PCLK_UART3,
-  rcu::RCU_PCLK::PCLK_UART4
-};
-
-// Memory barrier instructions
-#define isb() __asm__ __volatile__ ("isb" : : : "memory")
-#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
-#define sw_barrier() __asm__ volatile("" : : : "memory")
-
-// Direct register access macros
-#define USART_REG(offset) (*(volatile uint32_t*)(USART_base[SERIAL_PORT] + (offset)))
-#define USART_STAT0 USART_REG(STAT0_OFFSET)
-#define USART_DATA  USART_REG(DATA_OFFSET)
-#define USART_BAUD  USART_REG(BAUD_OFFSET)
-#define USART_CTL0  USART_REG(CTL0_OFFSET)
-#define USART_CTL1  USART_REG(CTL1_OFFSET)
-
-// Bit manipulation macros
-#define READ_BIT(reg, bit) (((reg) >> (bit)) & 1U)
-#define SET_BIT(reg, bit) ((reg) |= (1U << (bit)))
-#define CLEAR_BIT(reg, bit) ((reg) &= ~(1U << (bit)))
-
-// Initializes the MinSerial interface.
-// This function sets up the USART interface for serial communication.
-// If the selected serial port is not a hardware port, it disables the severe error reporting feature.
-static void MinSerialBegin() {
-  #if !WITHIN(SERIAL_PORT, 0, 4)
-    #warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
-    #warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
-  #else
-    int nvicIndex = nvicUART[SERIAL_PORT];
-
-    // NVIC base address for interrupt disable
-    struct NVICMin {
-      volatile uint32_t ISER[32];
-      volatile uint32_t ICER[32];
-    };
-    NVICMin *nvicBase = (NVICMin*)0xE000E100;
-
-    SBI32(nvicBase->ICER[nvicIndex >> 5], nvicIndex & 0x1F);
-
-    // We require memory barriers to properly disable interrupts
-    // (https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the)
-    dsb();
-    isb();
-
-    // Get the RCU PCLK for this USART
-    rcu::RCU_PCLK pclk = clockRegs[SERIAL_PORT];
-
-    // Disable then enable usart peripheral clocks
-    rcu::RCU_DEVICE.set_pclk_enable(pclk, false);
-    rcu::RCU_DEVICE.set_pclk_enable(pclk, true);
-
-    // Save current baudrate
-    uint32_t baudrate = USART_BAUD;
-
-    // Reset USART control registers
-    USART_CTL0 = 0;
-    USART_CTL1 = 0; // 1 stop bit
-
-    // Restore baudrate
-    USART_BAUD = baudrate;
-
-    // Enable transmitter and USART (8 bits, no parity, 1 stop bit)
-    SET_BIT(USART_CTL0, TEN_BIT);
-    SET_BIT(USART_CTL0, UEN_BIT);
-  #endif
-}
-
-// Writes a single character to the serial port.
-static void MinSerialWrite(char c) {
-  #if WITHIN(SERIAL_PORT, 0, 4)
-    // Wait until transmit buffer is empty
-    while (!READ_BIT(USART_STAT0, TBE_BIT)) {
-      hal.watchdog_refresh();
-      sw_barrier();
-    }
-    // Write character to data register
-    USART_DATA = c;
-  #endif
-}
-
-// Installs the minimum serial interface.
-// Sets the HAL_min_serial_init and HAL_min_serial_out function pointers to MinSerialBegin and MinSerialWrite respectively.
-void install_min_serial() {
-  HAL_min_serial_init = &MinSerialBegin;
-  HAL_min_serial_out = &MinSerialWrite;
-}
-
-extern "C" {
-  // A low-level assembly-based jump handler.
-  // Unconditionally branches to the CommonHandler_ASM function.
-  __attribute__((naked, aligned(4))) void JumpHandler_ASM() {
-    __asm__ __volatile__ ("b CommonHandler_ASM\n");
-  }
-  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) HardFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) BusFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) UsageFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) MemManage_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) NMI_Handler();
-}
-
-#endif // POSTMORTEM_DEBUGGING
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/README.md

@@ -1,8 +0,0 @@
-# Generic GD32 HAL based on the MFL Arduino Core
-
-This HAL is eventually intended to act as the generic HAL for all GD32 chips using the MFL library.
-
-Currently it supports:
- * GD32F303RET6
-
-Targeting the official [MFL Arduino Core](https://github.com/bnmguy/ArduinoCore_MFL).

Marlin/src/HAL/GD32_MFL/Servo.cpp

@@ -1,125 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#include "../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../inc/MarlinConfig.h"
-
-#if HAS_SERVOS
-
-#include "Servo.h"
-
-static uint_fast8_t servoCount = 0;
-static libServo* servos[NUM_SERVOS] = {0};
-constexpr millis_t servoDelay[] = SERVO_DELAY;
-static_assert(COUNT(servoDelay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
-
-// Initialize to the default timer priority. This will be overridden by a call from timers.cpp.
-// This allows all timer interrupt priorities to be managed from a single location in the HAL.
-static uint32_t servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 12, 0);
-
-// This must be called after the MFL Servo class has initialized the timer.
-// To be safe this is currently called after every call to attach().
-static void fixServoTimerInterruptPriority() {
-  auto& servoTimerIdx = GeneralTimer::get_instance(static_cast<timer::TIMER_Base>(TIMER_SERVO));
-  NVIC_SetPriority(servoTimerIdx.getTimerUpIRQ(), servo_interrupt_priority);
-}
-
-// Default constructor for libServo class.
-// Initializes the servo delay, pause state, and pause value.
-// Registers the servo instance in the servos array.
-libServo::libServo() :
-  delay(servoDelay[servoCount]),
-  was_attached_before_pause(false),
-  value_before_pause(0)
-{
-  servos[servoCount++] = this;
-}
-
-// Attaches a servo to a specified pin.
-int8_t libServo::attach(const int pin) {
-  if (servoCount >= MAX_SERVOS) return -1;
-  if (pin > 0) servoPin = pin;
-  auto result = mflServo.attach(servoPin);
-  fixServoTimerInterruptPriority();
-  return result;
-}
-
-// Attaches a servo to a specified pin with minimum and maximum pulse widths.
-int8_t libServo::attach(const int pin, const int min, const int max) {
-  if (servoCount >= MAX_SERVOS) return -1;
-  if (pin > 0) servoPin = pin;
-  auto result = mflServo.attach(servoPin, min, max);
-  fixServoTimerInterruptPriority();
-  return result;
-}
-
-// Moves the servo to a specified position.
-void libServo::move(const int value) {
-  if (attach(0) >= 0) {
-    mflServo.write(value);
-    safe_delay(delay);
-    TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
-  }
-}
-
-// Pause the servo by detaching it and storing its current state.
-void libServo::pause() {
-  was_attached_before_pause = mflServo.attached();
-  if (was_attached_before_pause) {
-    value_before_pause = mflServo.read();
-    mflServo.detach();
-  }
-}
-
-// Resume a previously paused servo.
-// If the servo was attached before the pause, this function re-attaches
-// the servo and moves it to the position it was in before the pause.
-void libServo::resume() {
-  if (was_attached_before_pause) {
-    attach();
-    move(value_before_pause);
-  }
-}
-
-// Pause all servos by stopping their timers.
-void libServo::pause_all_servos() {
-  for (auto& servo : servos)
-    if (servo) servo->pause();
-}
-
-// Resume all paused servos by starting their timers.
-void libServo::resume_all_servos() {
-  for (auto& servo : servos)
-    if (servo) servo->resume();
-}
-
-// Set the interrupt priority for the servo.
-// @param preemptPriority The preempt priority level.
-// @param subPriority The sub priority level.
-void libServo::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
-  servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
-}
-
-#endif // HAS_SERVOS
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/Servo.h

@@ -1,56 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <Servo.h>
-
-#include "../../core/millis_t.h"
-
-// Inherit and expand on the official library
-class libServo {
-public:
-  libServo();
-
-  int8_t attach(const int pin = 0); // pin == 0 uses value from previous call
-  int8_t attach(const int pin, const int min, const int max);
-  void detach() { mflServo.detach(); }
-
-  int read() { return mflServo.read(); }
-  void move(const int value);
-
-  void pause();
-  void resume();
-
-  static void pause_all_servos();
-  static void resume_all_servos();
-
-  static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
-
-private:
-  Servo mflServo;
-
-  int servoPin = 0;
-  millis_t delay = 0;
-
-  bool was_attached_before_pause;
-  int value_before_pause;
-};

Marlin/src/HAL/GD32_MFL/dogm/u8g_com_mfl_swspi.cpp

@@ -1,129 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm / Ryan Power
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../../inc/MarlinConfig.h"
-
-#if ALL(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
-
-#include <U8glib-HAL.h>
-#include "../../shared/HAL_SPI.h"
-
-#define nop asm volatile ("\tnop\n")
-
-static inline uint8_t swSpiTransfer_mode_0(uint8_t b) {
-  for (uint8_t i = 0; i < 8; ++i) {
-    const uint8_t state = (b & 0x80) ? HIGH : LOW;
-    WRITE(DOGLCD_SCK, HIGH);
-    WRITE(DOGLCD_MOSI, state);
-    b <<= 1;
-    WRITE(DOGLCD_SCK, LOW);
-  }
-  return b;
-}
-
-static inline uint8_t swSpiTransfer_mode_3(uint8_t b) {
-  for (uint8_t i = 0; i < 8; ++i) {
-    const uint8_t state = (b & 0x80) ? HIGH : LOW;
-    WRITE(DOGLCD_SCK, LOW);
-    WRITE(DOGLCD_MOSI, state);
-    b <<= 1;
-    WRITE(DOGLCD_SCK, HIGH);
-  }
-  return b;
-}
-
-static void u8g_sw_spi_shift_out(uint8_t val) {
-  #if U8G_SPI_USE_MODE_3
-    swSpiTransfer_mode_3(val);
-  #else
-    swSpiTransfer_mode_0(val);
-  #endif
-}
-
-static void swSpiInit() {
-  #if PIN_EXISTS(LCD_RESET)
-    SET_OUTPUT(LCD_RESET_PIN);
-  #endif
-  SET_OUTPUT(DOGLCD_A0);
-  OUT_WRITE(DOGLCD_SCK, LOW);
-  OUT_WRITE(DOGLCD_MOSI, LOW);
-  OUT_WRITE(DOGLCD_CS, HIGH);
-}
-
-uint8_t u8g_com_HAL_MFL_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_INIT:
-      swSpiInit();
-      break;
-    case U8G_COM_MSG_STOP:
-      break;
-    case U8G_COM_MSG_RESET:
-      #if PIN_EXISTS(LCD_RESET)
-        WRITE(LCD_RESET_PIN, arg_val);
-      #endif
-      break;
-    case U8G_COM_MSG_CHIP_SELECT:
-      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
-                                    // the next chip select goes active
-          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
-          WRITE(DOGLCD_CS, LOW);
-          nop;                      // Hold SCK high for a few ns
-          nop;
-         }
-        else {
-          WRITE(DOGLCD_CS, HIGH);
-          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
-        }
-      #else
-        WRITE(DOGLCD_CS, !arg_val);
-      #endif
-      break;
-    case U8G_COM_MSG_WRITE_BYTE:
-      u8g_sw_spi_shift_out(arg_val);
-      break;
-    case U8G_COM_MSG_WRITE_SEQ: {
-      uint8_t* ptr = (uint8_t*)arg_ptr;
-      while (arg_val > 0) {
-        u8g_sw_spi_shift_out(*ptr++);
-        arg_val--;
-      }
-    } break;
-    case U8G_COM_MSG_WRITE_SEQ_P: {
-      uint8_t* ptr = (uint8_t*)arg_ptr;
-      while (arg_val > 0) {
-        u8g_sw_spi_shift_out(u8g_pgm_read(ptr));
-        ptr++;
-        arg_val--;
-      }
-    } break;
-    case U8G_COM_MSG_ADDRESS:       // Define cmd (arg_val = 0) or data mode (arg_val = 1)
-      WRITE(DOGLCD_A0, arg_val);
-      break;
-  }
-  return 1;
-}
-
-#endif // HAS_MARLINUI_U8GLIB && FORCE_SOFT_SPI
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_bl24cxx.cpp

@@ -1,93 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../../inc/MarlinConfig.h"
-
-#if ENABLED(IIC_BL24CXX_EEPROM)
-
-#include "../../shared/eeprom_if.h"
-#include "../../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
-#endif
-
-size_t PersistentStore::capacity() {
-  return MARLIN_EEPROM_SIZE - eeprom_exclude_size;
-}
-
-bool PersistentStore::access_start() {
-  eeprom_init();
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint16_t written = 0;
-  while (size--) {
-    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
-    // EPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
-      eeprom_write_byte(p, v);
-      if (++written & 0x7F) delay(4); else safe_delay(4);
-      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-
-  return false;
-}
-
-#endif // IIC_BL24CXX_EEPROM
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_if_iic.cpp

@@ -1,54 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Platform-independent Arduino functions for I2C EEPROM.
- * Enable USE_SHARED_EEPROM if not supplied by the framework.
- */
-
-#include "../../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../../inc/MarlinConfig.h"
-
-#if ENABLED(IIC_BL24CXX_EEPROM)
-
-#include "../../../libs/BL24CXX.h"
-#include "../../shared/eeprom_if.h"
-
-void eeprom_init() {
-  BL24CXX::init();
-}
-
-void eeprom_write_byte(uint8_t *pos, uint8_t value) {
-  const unsigned eeprom_address = (unsigned)pos;
-  return BL24CXX::writeOneByte(eeprom_address, value);
-}
-
-uint8_t eeprom_read_byte(uint8_t *pos) {
-  const unsigned eeprom_address = (unsigned)pos;
-  return BL24CXX::readOneByte(eeprom_address);
-}
-
-#endif // IIC_BL24CXX_EEPROM
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_wired.cpp

@@ -1,96 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#include "../../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../../inc/MarlinConfig.h"
-
-#if USE_WIRED_EEPROM
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../../shared/eeprom_if.h"
-#include "../../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
-#endif
-
-size_t PersistentStore::capacity() {
-  return MARLIN_EEPROM_SIZE - eeprom_exclude_size;
-}
-
-bool PersistentStore::access_start() {
-  eeprom_init();
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint16_t written = 0;
-  while (size--) {
-    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
-      eeprom_write_byte(p, v);
-      // Avoid triggering watchdog during long EEPROM writes
-      if (++written & 0x7F)
-        delay(2);
-      else
-        safe_delay(2);
-      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
-    if (writing)
-      *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-
-  return false;
-}
-
-#endif // USE_WIRED_EEPROM
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/endstop_interrupts.h

@@ -1,61 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../../module/endstops.h"
-
-// One ISR for all EXT-Interrupts
-void endstop_ISR() { endstops.update(); }
-
-void setup_endstop_interrupts() {
-  #define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
-  TERN_(USE_X_MAX,       _ATTACH(X_MAX_PIN));
-  TERN_(USE_X_MIN,       _ATTACH(X_MIN_PIN));
-  TERN_(USE_Y_MAX,       _ATTACH(Y_MAX_PIN));
-  TERN_(USE_Y_MIN,       _ATTACH(Y_MIN_PIN));
-  TERN_(USE_Z_MAX,       _ATTACH(Z_MAX_PIN));
-  TERN_(USE_Z_MIN,       _ATTACH(Z_MIN_PIN));
-  TERN_(USE_X2_MAX,      _ATTACH(X2_MAX_PIN));
-  TERN_(USE_X2_MIN,      _ATTACH(X2_MIN_PIN));
-  TERN_(USE_Y2_MAX,      _ATTACH(Y2_MAX_PIN));
-  TERN_(USE_Y2_MIN,      _ATTACH(Y2_MIN_PIN));
-  TERN_(USE_Z2_MAX,      _ATTACH(Z2_MAX_PIN));
-  TERN_(USE_Z2_MIN,      _ATTACH(Z2_MIN_PIN));
-  TERN_(USE_Z3_MAX,      _ATTACH(Z3_MAX_PIN));
-  TERN_(USE_Z3_MIN,      _ATTACH(Z3_MIN_PIN));
-  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
-  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
-  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
-  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
-  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
-  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
-  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
-  TERN_(USE_J_MIN,       _ATTACH(J_MIN_PIN));
-  TERN_(USE_K_MAX,       _ATTACH(K_MAX_PIN));
-  TERN_(USE_K_MIN,       _ATTACH(K_MIN_PIN));
-  TERN_(USE_U_MAX,       _ATTACH(U_MAX_PIN));
-  TERN_(USE_U_MIN,       _ATTACH(U_MIN_PIN));
-  TERN_(USE_V_MAX,       _ATTACH(V_MAX_PIN));
-  TERN_(USE_V_MIN,       _ATTACH(V_MIN_PIN));
-  TERN_(USE_W_MAX,       _ATTACH(W_MAX_PIN));
-  TERN_(USE_W_MIN,       _ATTACH(W_MIN_PIN));
-}

Marlin/src/HAL/GD32_MFL/fast_pwm.cpp

@@ -1,97 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-#include "../platforms.h"
-
-#ifdef ARDUINO_ARCH_MFL
-
-#include "../../inc/MarlinConfig.h"
-
-#include <PinOpsMap.hpp>
-#include <PinOps.hpp>
-#include "timers.h"
-
-static uint16_t timer_frequency[TIMER_COUNT];
-
-void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t value, const uint16_t scale, const bool invert) {
-  // Calculate duty cycle based on inversion flag
-  const uint16_t duty = invert ? scale - value : value;
-
-  // Check if the pin supports PWM
-  if (PWM_PIN(pin)) {
-    // Get the timer peripheral base associated with the pin
-    const auto timer_base = getPinOpsPeripheralBase<TIMERPinOps, timer::TIMER_Base>(TIMER_PinOps, static_cast<pin_size_t>(pin));
-
-    // Initialize the timer instance
-    auto& TimerInstance = GeneralTimer::get_instance(timer_base);
-
-    // Get channel and previous channel mode
-    const auto channel = getPackedPinChannel(getPackedPinOps(TIMER_PinOps, static_cast<pin_size_t>(pin)));
-    const InputOutputMode previous = TimerInstance.getChannelMode(channel);
-
-    if (timer_frequency[static_cast<size_t>(timer_base)] == 0) {
-      set_pwm_frequency(pin, PWM_FREQUENCY);
-    }
-
-    // Set the PWM duty cycle
-    TimerInstance.setCaptureCompare(channel, duty, CCFormat::B8);
-
-    // Configure pin as PWM output
-    pinOpsPinout(TIMER_PinOps, static_cast<pin_size_t>(pin));
-
-    // Set channel mode if not already set and start timer
-    if (previous != InputOutputMode::PWM0) {
-      TimerInstance.setChannelMode(channel, InputOutputMode::PWM0, static_cast<pin_size_t>(pin));
-      TimerInstance.start();
-    }
-  } else {
-    pinMode(pin, OUTPUT);
-    digitalWrite(pin, duty < scale / 2 ? LOW : HIGH);
-  }
-}
-
-void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
-  // Check if the pin supports PWM
-  if (!PWM_PIN(pin)) return;
-
-  // Get the timer peripheral base associated with the pin
-  const auto timer_base = getPinOpsPeripheralBase<TIMERPinOps, timer::TIMER_Base>(TIMER_PinOps, static_cast<pin_size_t>(pin));
-
-  // Guard against modifying protected timers
-  #ifdef STEP_TIMER
-    if (timer_base == static_cast<timer::TIMER_Base>(STEP_TIMER)) return;
-  #endif
-  #ifdef TEMP_TIMER
-    if (timer_base == static_cast<timer::TIMER_Base>(TEMP_TIMER)) return;
-  #endif
-  #if defined(PULSE_TIMER) && MF_TIMER_PULSE != MF_TIMER_STEP
-    if (timer_base == static_cast<timer::TIMER_Base>(PULSE_TIMER)) return;
-  #endif
-
-  // Initialize the timer instance
-  auto& TimerInstance = GeneralTimer::get_instance(timer_base);
-
-  TimerInstance.setRolloverValue(f_desired, TimerFormat::HERTZ);
-  timer_frequency[timer_base_to_index(timer_base)] = f_desired;
-}
-
-#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/fastio.h

@@ -1,85 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// Fast I/O interfaces for GD32F303RE
-
-#include <GPIO.hpp>
-#include <PinOps.hpp>
-#include <PinOpsMap.hpp>
-
-template<typename T>
-static inline void fast_write_pin_wrapper(pin_size_t IO, T V) {
-  auto port = getPortFromPin(IO);
-  auto pin = getPinInPort(IO);
-  if (static_cast<bool>(V)) gpio::fast_set_pin(port, pin);
-  else                      gpio::fast_clear_pin(port, pin);
-}
-
-static inline bool fast_read_pin_wrapper(pin_size_t IO) {
-  return gpio::fast_read_pin(getPortFromPin(IO), getPinInPort(IO));
-}
-
-static inline void fast_toggle_pin_wrapper(pin_size_t IO) {
-  gpio::fast_toggle_pin(getPortFromPin(IO), getPinInPort(IO));
-}
-
-// ------------------------
-// Defines
-// ------------------------
-
-#ifndef PWM
-  #define PWM OUTPUT
-#endif
-
-#define _WRITE(IO, V)           fast_write_pin_wrapper(IO, V)
-#define _READ(IO)               fast_read_pin_wrapper(IO)
-#define _TOGGLE(IO)             fast_toggle_pin_wrapper(IO)
-
-#define _GET_MODE(IO)
-#define _SET_MODE(IO, M)        pinMode((IO), (M))
-#define _SET_OUTPUT(IO)         pinMode((IO), OUTPUT)
-#define _SET_OUTPUT_OD(IO)      pinMode((IO), OUTPUT_OPEN_DRAIN)
-
-#define WRITE(IO, V)            _WRITE((IO), (V))
-#define READ(IO)                _READ(IO)
-#define TOGGLE(IO)              _TOGGLE(IO)
-
-#define OUT_WRITE(IO, V)        do { _SET_OUTPUT(IO); WRITE((IO), (V)); } while (0)
-#define OUT_WRITE_OD(IO, V)     do { _SET_OUTPUT_OD(IO); WRITE((IO), (V)); } while (0)
-
-#define SET_INPUT(IO)           _SET_MODE((IO), INPUT)
-#define SET_INPUT_PULLUP(IO)    _SET_MODE((IO), INPUT_PULLUP)
-#define SET_INPUT_PULLDOWN(IO)  _SET_MODE((IO), INPUT_PULLDOWN)
-#define SET_OUTPUT(IO)          OUT_WRITE((IO), LOW)
-#define SET_OUTPUT_OD(IO)       OUT_WRITE_OD((IO), LOW)
-#define SET_PWM(IO)             _SET_MODE((IO), PWM)
-
-#define IS_INPUT(IO)
-#define IS_OUTPUT(IO)
-
-#define PWM_PIN(P)              isPinInPinOps(TIMER_PinOps, P)
-#define NO_COMPILE_TIME_PWM
-
-// Wrappers for digitalRead and digitalWrite
-#define extDigitalRead(IO)      digitalRead(IO)
-#define extDigitalWrite(IO, V)  digitalWrite((IO), (V))

Marlin/src/HAL/GD32_MFL/inc/Conditionals_LCD.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if ALL(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
-  #define U8G_SW_SPI_MFL 1
-#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_adv.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if ALL(HAS_MEDIA, USBD_USE_CDC_MSC)
-  #define HAS_SD_HOST_DRIVE 1
-#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_post.h

@@ -1,29 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// If no real or emulated EEPROM selected, fall back to SD emulation
-#if USE_FALLBACK_EEPROM
-  #define SDCARD_EEPROM_EMULATION
-#elif ANY(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
-#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_type.h

@@ -1,22 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once

Marlin/src/HAL/GD32_MFL/inc/SanityCheck.h

@@ -1,97 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// Test MFL GD32 specific configuration values for errors at compile-time.
-#if ENABLED(SDCARD_EEPROM_EMULATION) && !HAS_MEDIA
-  #undef SDCARD_EEPROM_EMULATION  // avoid additional error noise
-  #if USE_FALLBACK_EEPROM
-    #warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
-  #endif
-  #error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
-#endif
-
-#if ENABLED(FLASH_EEPROM_LEVELING)
-  #error "FLASH_EEPROM_LEVELING is not supported on GD32."
-#endif
-
-#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-  #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on GD32."
-#elif ENABLED(SERIAL_STATS_DROPPED_RX)
-  #error "SERIAL_STATS_DROPPED_RX is not supported on GD32."
-#endif
-
-#if TEMP_SENSOR_SOC && defined(ATEMP) && TEMP_SOC_PIN != ATEMP
-  #error "TEMP_SENSOR_SOC requires 'TEMP_SOC_PIN ATEMP' on GD32"
-#endif
-
-// Check for common serial pin conflicts
-#define _CHECK_SERIAL_PIN(N) (( \
-    BTN_EN1 == N || BTN_EN2 == N || DOGLCD_CS == N || HEATER_BED_PIN == N || FAN0_PIN == N || \
-    SDIO_D2_PIN == N || SDIO_D3_PIN == N || SDIO_CK_PIN == N || SDIO_CMD_PIN == N || \
-    Y_STEP_PIN == N || Y_ENABLE_PIN == N || E0_ENABLE_PIN == N || POWER_LOSS_PIN == N \
-  ))
-
-#define CHECK_SERIAL_PIN(T, N) defined(UART##N##_##T##_PIN) && _CHECK_SERIAL_PIN(UART##N##_##T##_PIN)
-
-#if SERIAL_IN_USE(0)
-  #if CHECK_SERIAL_PIN(TX, 0)
-    #error "Serial Port 0 TX IO pins conflict with another pin on the board."
-  #endif
-  #if CHECK_SERIAL_PIN(RX, 0)
-    #error "Serial Port 0 RX IO pins conflict with another pin on the board."
-  #endif
-#endif
-#if SERIAL_IN_USE(1)
-  #if CHECK_SERIAL_PIN(TX, 1)
-    #error "Serial Port 1 TX IO pins conflict with another pin on the board."
-  #endif
-  #if CHECK_SERIAL_PIN(RX, 1)
-    #error "Serial Port 1 RX IO pins conflict with another pin on the board."
-  #endif
-#endif
-#if SERIAL_IN_USE(2)
-  #if CHECK_SERIAL_PIN(TX, 2)
-    #error "Serial Port 2 TX IO pins conflict with another pin on the board."
-  #endif
-  #if CHECK_SERIAL_PIN(RX, 2)
-    #error "Serial Port 2 RX IO pins conflict with another pin on the board."
-  #endif
-#endif
-#if SERIAL_IN_USE(3)
-  #if CHECK_SERIAL_PIN(TX, 3)
-    #error "Serial Port 3 TX IO pins conflict with another pin on the board."
-  #endif
-  #if CHECK_SERIAL_PIN(RX, 3)
-    #error "Serial Port 3 RX IO pins conflict with another pin on the board."
-  #endif
-#endif
-#if SERIAL_IN_USE(4)
-  #if CHECK_SERIAL_PIN(TX, 4)
-    #error "Serial Port 4 TX IO pins conflict with another pin on the board."
-  #endif
-  #if CHECK_SERIAL_PIN(RX, 4)
-    #error "Serial Port 4 RX IO pins conflict with another pin on the board."
-  #endif
-#endif
-#undef CHECK_SERIAL_PIN
-#undef _CHECK_SERIAL_PIN

Marlin/src/HAL/GD32_MFL/pinsDebug.h

@@ -1,102 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Pins Debugging for GD32
- *
- *   - NUMBER_PINS_TOTAL
- *   - MULTI_NAME_PAD
- *   - getPinByIndex(index)
- *   - printPinNameByIndex(index)
- *   - getPinIsDigitalByIndex(index)
- *   - digitalPinToAnalogIndex(pin)
- *   - getValidPinMode(pin)
- *   - isValidPin(pin)
- *   - isAnalogPin(pin)
- *   - digitalRead_mod(pin)
- *   - pwm_status(pin)
- *   - printPinPWM(pin)
- *   - printPinPort(pin)
- *   - printPinNumber(pin)
- *   - printPinAnalog(pin)
- */
-
-#include "../../inc/MarlinConfig.h"
-#include <Arduino.h>
-#include <PinOps.hpp>
-#include <Analog.h>
-
-#ifndef TOTAL_PIN_COUNT
-  #error "Expected TOTAL_PIN_COUNT not found."
-#endif
-
-#define NUM_DIGITAL_PINS  TOTAL_PIN_COUNT
-#define NUMBER_PINS_TOTAL TOTAL_PIN_COUNT
-
-#define getPinByIndex(x) pin_t(pin_array[x].pin)
-#define isValidPin(P) WITHIN(P, 0, (NUM_DIGITAL_PINS - 1))
-#define digitalRead_mod(P) extDigitalRead(P)
-#define printPinNumber(P) do { sprintf_P(buffer, PSTR("%3hd "), pin_t(P)); SERIAL_ECHO(buffer); } while (0)
-#define printPinAnalog(P) do { sprintf_P(buffer, PSTR(" (A%2d)  "), pin_t(getAdcChannelFromPin(P))); SERIAL_ECHO(buffer); } while (0)
-#define printPinNameByIndex(x) do { sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); } while (0)
-
-#define MULTI_NAME_PAD 21 // Space needed to be pretty if not first name assigned to a pin
-
-#ifndef M43_NEVER_TOUCH
-  #define M43_NEVER_TOUCH(x) WITHIN(x, 9, 10) // SERIAL pins: PA9(TX) PA10(RX)
-#endif
-
-bool isAnalogPin(const pin_t pin) {
-  if (!isValidPin(pin)) return false;
-
-  if (getAdcChannel(pin) != adc::ADC_Channel::INVALID) {
-    auto& instance = gpio::GPIO::get_instance(getPortFromPin(pin)).value();
-    return instance.get_pin_mode(getPinInPort(pin)) == gpio::Pin_Mode::ANALOG && !M43_NEVER_TOUCH(pin);
-  }
-
-  return false;
-}
-
-bool getValidPinMode(const pin_t pin) {
-  if (!isValidPin(pin)) return false;
-
-  auto& instance = gpio::GPIO::get_instance(getPortFromPin(pin)).value();
-  gpio::Pin_Mode mode = instance.get_pin_mode(getPinInPort(pin));
-
-  return mode != gpio::Pin_Mode::ANALOG && mode != gpio::Pin_Mode::INPUT_FLOATING &&
-         mode != gpio::Pin_Mode::INPUT_PULLUP && mode != gpio::Pin_Mode::INPUT_PULLDOWN;
-}
-
-bool getPinIsDigitalByIndex(const int16_t index) {
-  const pin_t pin = getPinByIndex(index);
-  return (!isAnalogPin(pin));
-}
-
-int8_t digitalPinToAnalogIndex(const pin_t pin) {
-  if (!isValidPin(pin) || !isAnalogPin(pin)) return -1;
-  return pin; // Analog and digital pin indexes are shared
-}
-
-bool pwm_status(const pin_t pin) { return false; }
-void printPinPWM(const pin_t pin) { /* TODO */ }
-void printPinPort(const pin_t pin) { /* TODO */ }