Update from devel

Turn on multiple probing, off power save recovery, bump version

.editorconfig

@@ -4,10 +4,10 @@ root = true
 [{*.patch,syntax_test_*}]
 trim_trailing_whitespace = false
 
-[{*.c,*.cpp,*.h,*.ino}]
+[{*.c,*.cpp,*.h}]
 charset = utf-8
 
-[{*.c,*.cpp,*.h,*.ino,Makefile}]
+[{*.c,*.cpp,*.h,Makefile}]
 trim_trailing_whitespace = true
 insert_final_newline = true
 end_of_line = lf

.gitattributes

@@ -17,5 +17,3 @@
 *.png binary
 *.jpg binary
 *.fon binary
-*.bin binary
-*.woff binary

.github/FUNDING.yml

@@ -1,3 +1 @@
-github: [thinkyhead]
-patreon: thinkyhead
-custom: ["https://www.thinkyhead.com/donate-to-marlin"]
+custom: http://www.thinkyhead.com/donate-to-marlin

.github/contributing.md

@@ -34,15 +34,16 @@ This project and everyone participating in it is governed by the [Marlin Code of
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
-* [Marlin RepRap forum](https://reprap.org/forum/list.php?415)
+* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
 * [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
 
-If chat is more your speed, you can join the MarlinFirmware Discord server:
+If chat is more your speed, you can join the MarlinFirmware Slack team:
 
-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
-* Even though our Discord is pretty active, it may take a while for community members to respond — please be patient!
-* Use the `#general` channel for general questions or discussion about Marlin.
-* Other channels exist for certain topics or are limited to Patrons. Check the channel list.
+* Join the Marlin Slack Team
+  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
+  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
+  * Use the `#general` channel for general questions or discussion about Marlin.
+  * Other channels exist for certain topics. Check the channel list.
 
 ## How Can I Contribute?
 
@@ -92,7 +93,7 @@ Before creating a suggestion, please check [this list](#before-submitting-a-sugg
 
 #### Before Submitting a Feature Request
 
-* **Check the [Marlin website](https://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](https://marlinfw.org/docs/configuration/configuration.html).
+* **Check the [Marlin website](http://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](http://marlinfw.org/docs/configuration/configuration.html).
 * **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
 
 #### How Do I Submit A (Good) Feature Request?
@@ -116,12 +117,12 @@ Unsure where to begin contributing to Marlin? You can start by looking through t
 
 ### Pull Requests
 
-Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](https://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
 
 * Fill in [the required template](pull_request_template.md).
 * Don't include issue numbers in the PR title.
 * Include pictures, diagrams, and links to videos in your Pull Request to demonstrate your changes, if needed.
-* Follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website.
+* Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website.
 * Document new code with clear and concise comments.
 * End all files with a newline.
 
@@ -136,7 +137,7 @@ Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x
 
 ### C++ Coding Standards
 
-* Please read and follow the [Coding Standards](https://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
+* Please read and follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
 
 ### Documentation
 

.github/issue_template.md

@@ -2,13 +2,9 @@
 
 Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Instead use one of the following options:
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
 
-- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
-- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
-- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
-
-Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
 
 -->
 

.github/lock.yml

@@ -1,40 +0,0 @@
-#
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
-#
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: [ 'no-locking' ]
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: >
-  This thread has been automatically locked since there has not been
-  any recent activity after it was closed. Please open a new issue for
-  related bugs.
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: true
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo

.github/pull_request_template.md

@@ -14,10 +14,6 @@ We must be able to understand your proposed change from this description. If we
 
 <!-- What does this fix or improve? -->
 
-### Configurations
-
-<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
-
 ### Related Issues
 
 <!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.github/workflows/test-builds.yml

@@ -1,145 +0,0 @@
-#
-# test-builds.yml
-# Do test builds to catch compile errors
-#
-
-name: CI
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.0.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-
-jobs:
-  test_builds:
-    name: Run All Tests
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    strategy:
-      matrix:
-        test-platform:
-        # Base Environments
-
-        - DUE
-        - DUE_archim
-        - esp32
-        - linux_native
-        - mega2560
-        - at90usb1286_dfu
-        - teensy31
-        - teensy35
-        - teensy41
-        - SAMD51_grandcentral_m4
-
-        # Extended AVR Environments
-
-        - FYSETC_F6
-        - mega1280
-        - rambo
-        - sanguino1284p
-        - sanguino644p
-
-        # STM32F1 (Maple) Environments
-
-        #- STM32F103RC_btt_maple
-        - STM32F103RC_btt_USB_maple
-        - STM32F103RC_fysetc_maple
-        - STM32F103RC_meeb
-        - jgaurora_a5s_a1_maple
-        - STM32F103VE_longer_maple
-        #- mks_robin_maple
-        - mks_robin_lite_maple
-        - mks_robin_pro_maple
-        #- mks_robin_nano35_maple
-        #- STM32F103RE_creality_maple
-        - STM32F103VE_ZM3E4V2_USB_maple
-
-        # STM32 (ST) Environments
-
-        - STM32F103RC_btt
-        #- STM32F103RC_btt_USB
-        - STM32F103RE_btt
-        - STM32F103RE_btt_USB
-        - STM32F103RE_creality
-        - STM32F103VE_longer
-        - STM32F407VE_black
-        - STM32F401VE_STEVAL
-        - BIGTREE_BTT002
-        - BIGTREE_SKR_PRO
-        - BIGTREE_GTR_V1_0
-        - mks_robin
-        - ARMED
-        - FYSETC_S6
-        - STM32F070CB_malyan
-        - STM32F070RB_malyan
-        - malyan_M300
-        - FLYF407ZG
-        - rumba32
-        - LERDGEX
-        - LERDGEK
-        - mks_robin_nano35
-        - NUCLEO_F767ZI
-        - REMRAM_V1
-        - BTT_SKR_SE_BX
-        - chitu_f103
-        - Index_Mobo_Rev03
-
-        # Put lengthy tests last
-
-        - LPC1768
-        - LPC1769
-
-        # Non-working environment tests
-        #- at90usb1286_cdc
-        #- STM32F103CB_malyan
-        #- STM32F103RE
-        #- mks_robin_mini
-
-    steps:
-
-    - name: Check out the PR
-      uses: actions/checkout@v3
-
-    - name: Cache pip
-      uses: actions/cache@v3
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
-
-    - name: Cache PlatformIO
-      uses: actions/cache@v3
-      with:
-        path: ~/.platformio
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
-
-    - name: Select Python 3.7
-      uses: actions/setup-python@v3
-      with:
-        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
-        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
-
-    - name: Install PlatformIO
-      run: |
-        pip install -U https://github.com/platformio/platformio-core/archive/v5.2.5.zip
-        platformio update
-
-    - name: Run ${{ matrix.test-platform }} Tests
-      run: |
-        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}

.gitignore

@@ -16,22 +16,18 @@
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #
 
-# Generated files
+# Our automatic versioning scheme generates the following file
+# NEVER put it in the repository
 _Version.h
-bdf2u8g
-marlin_config.json
-mczip.h
-*.gen
-*.sublime-workspace
 
 #
 # OS
 #
 applet/
-.DS_Store
+*.DS_Store
 
 #
 # Misc
@@ -41,6 +37,7 @@ applet/
 *.rej
 *.bak
 *.idea
+*.s
 *.i
 *.ii
 *.swp
@@ -80,6 +77,7 @@ tags
 *.out
 *.app
 
+
 #
 # C
 #
@@ -125,10 +123,33 @@ tags
 .gcc-flags.json
 /lib/
 
+# Workaround for Deviot+platformio quirks
+Marlin/lib
+Marlin/platformio.ini
+Marlin/*/platformio.ini
+Marlin/*/*/platformio.ini
+Marlin/*/*/*/platformio.ini
+Marlin/*/*/*/*/platformio.ini
+Marlin/.travis.yml
+Marlin/*/.travis.yml
+Marlin/*/*/.travis.yml
+Marlin/*/*/*/.travis.yml
+Marlin/*/*/*/*/.travis.yml
+Marlin/.gitignore
+Marlin/*/.gitignore
+Marlin/*/*/.gitignore
+Marlin/*/*/*/.gitignore
+Marlin/*/*/*/*/.gitignore
+Marlin/readme.txt
+Marlin/*/readme.txt
+Marlin/*/*/readme.txt
+Marlin/*/*/*/readme.txt
+Marlin/*/*/*/*/readme.txt
+
 # Secure Credentials
 Configuration_Secure.h
 
-# Visual Studio
+#Visual Studio
 *.sln
 *.vcxproj
 *.vcxproj.user
@@ -139,33 +160,27 @@ __vm/
 .vs/
 vc-fileutils.settings
 
-# Visual Studio Code
-.vscode/*
-!.vscode/extensions.json
-
-#Simulation
-imgui.ini
-eeprom.dat
-spi_flash.bin
+#Visual Studio Code
+.vscode
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/*.db
 
 #cmake
 CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
-build/
 
-# CLion
+#CLion
 cmake-build-*
 
-# Eclipse
+#Eclipse
 .project
 .cproject
 .pydevproject
 .settings
 .classpath
 
-# Python
+#Python
 __pycache__
-
-# IOLogger logs
-*_log.csv

.travis.yml

@@ -0,0 +1,84 @@
+dist: bionic
+sudo: false
+
+language: python
+python:
+  - "3.7"
+
+notifications:
+  email: false
+
+env:
+  # Base Environments
+  - TEST_PLATFORM="DUE"
+  - TEST_PLATFORM="esp32"
+  - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="megaatmega2560"
+  - TEST_PLATFORM="teensy31"
+  - TEST_PLATFORM="teensy35"
+
+  # Extended AVR Environments
+  - TEST_PLATFORM="FYSETC_F6_13"
+  - TEST_PLATFORM="megaatmega1280"
+  - TEST_PLATFORM="rambo"
+  - TEST_PLATFORM="sanguino_atmega1284p"
+  - TEST_PLATFORM="sanguino_atmega644p"
+
+  # Extended STM32 Environments
+  - TEST_PLATFORM="STM32F103RC_bigtree"
+  - TEST_PLATFORM="STM32F103RC_bigtree_USB"
+  - TEST_PLATFORM="STM32F103RE_bigtree"
+  - TEST_PLATFORM="STM32F103RE_bigtree_USB"
+  - TEST_PLATFORM="STM32F103RC_fysetc"
+  - TEST_PLATFORM="jgaurora_a5s_a1"
+  - TEST_PLATFORM="STM32F103VE_longer"
+  - TEST_PLATFORM="STM32F407VE_black"
+  - TEST_PLATFORM="BIGTREE_SKR_PRO"
+  - TEST_PLATFORM="mks_robin"
+  - TEST_PLATFORM="ARMED"
+
+  # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
+  #- TEST_PLATFORM="STM32F4"
+  #- TEST_PLATFORM="STM32F7"
+
+  # Put lengthy tests last
+  - TEST_PLATFORM="LPC1768"
+  - TEST_PLATFORM="LPC1769"
+
+  # Non-working environment tests
+  #- TEST_PLATFORM="BIGTREE_BTT002" this board isn't released yet. we need pinout to be sure about what we do
+  #- TEST_PLATFORM="at90usb1286_cdc"
+  #- TEST_PLATFORM="at90usb1286_dfu"
+  #- TEST_PLATFORM="STM32F103CB_malyan"
+  #- TEST_PLATFORM="mks_robin_lite"
+  #- TEST_PLATFORM="mks_robin_mini"
+  #- TEST_PLATFORM="mks_robin_nano"
+  #- TEST_PLATFORM="SAMD51_grandcentral_m4"
+
+before_install:
+  #
+  # Fetch the tag information for the current branch
+  - git fetch origin --tags
+  #
+  # Publish the buildroot script folder
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
+  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
+
+install:
+  #- pip install -U platformio
+  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+
+before_script:
+  # Update PlatformIO packages
+  - platformio update
+  #
+  # Change current working directory to the build dir
+  - cd ${TRAVIS_BUILD_DIR}
+  #
+  # Generate custom version include
+  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/
+  - cat ${TRAVIS_BUILD_DIR}/Marlin/Version.h
+  #
+script:
+  - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

.vscode/extensions.json

@@ -1,11 +0,0 @@
-{
-    // See http://go.microsoft.com/fwlink/?LinkId=827846
-    // for the documentation about the extensions.json format
-    "recommendations": [
-        "marlinfirmware.auto-build",
-        "platformio.platformio-ide"
-    ],
-    "unwantedRecommendations": [
-        "ms-vscode.cpptools-extension-pack"
-    ]
-}

LICENSE

@@ -3,7 +3,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (c) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
+ Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -647,7 +647,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -666,11 +666,12 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<https://www.gnu.org/licenses/>.
+<http://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<https://www.gnu.org/licenses/why-not-lgpl.html>.
+<http://www.gnu.org/philosophy/why-not-lgpl.html>.
+

Makefile

@@ -1,52 +0,0 @@
-help:
-	@echo "Tasks for local development:"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
-	@echo "* tests-single-local:          Run a single test locally"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker-compose"
-	@echo "* tests-all-local:             Run all tests locally"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker-compose"
-	@echo "* setup-local-docker:          Setup local docker-compose"
-	@echo ""
-	@echo "Options for testing:"
-	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
-	@echo "                       test. If you set it to ALL it will run all "
-	@echo "                       tests, but some of them are broken: use "
-	@echo "                       tests-all-* instead to run only the ones that "
-	@echo "                       run on GitHub CI"
-	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
-	@echo "                       the index of the test (1-based)"
-	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
-	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
-	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
-
-tests-single-ci:
-	export GIT_RESET_HARD=true
-	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
-.PHONY: tests-single-ci
-
-tests-single-local:
-	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
-	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
-	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
-.PHONY: tests-single-local
-
-tests-single-local-docker:
-	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
-	docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
-.PHONY: tests-single-local-docker
-
-tests-all-local:
-	export PATH=./buildroot/bin/:./buildroot/tests/:${PATH} \
-	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
-.PHONY: tests-all-local
-
-tests-all-local-docker:
-	docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-.PHONY: tests-all-local-docker
-
-setup-local-docker:
-	docker-compose build
-.PHONY: setup-local-docker

Marlin/Makefile

@@ -14,7 +14,7 @@
 # Detailed instructions for using the makefile:
 #
 #  1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
-#     contains the Arduino installation (for example, under macOS, this
+#     contains the Arduino installation (for example, under Mac OS X, this
 #     might be /Applications/Arduino.app/Contents/Resources/Java).
 #
 #  2. Modify the line containing "UPLOAD_PORT" to refer to the filename
@@ -22,10 +22,8 @@
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
 #     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
-#  3. Set the line containing "MCU" to match your board's processor. Set
-#     "PROG_MCU" as the AVR part name corresponding to "MCU". You can use the
-#     following command to get a list of correspondences: `avrdude -c alf -p x`
-#     Older boards are atmega8 based, newer ones like Arduino Mini, Bluetooth
+#  3. Set the line containing "MCU" to match your board's processor.
+#     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
 #     or Diecimila have the atmega168.  If you're using a LilyPad Arduino,
 #     change F_CPU to 8000000. If you are using Gen7 electronics, you
 #     probably need to use 20000000. Either way, you must regenerate
@@ -36,18 +34,18 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings at the top of this file can be overridden from
+# Note that all settings at the top of this file can be overriden from
 # the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
 #
 # To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
 #
 # To compile and upload simply add "upload" to the end of the line...
 #
 #   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
-#   HARDWARE_MOTHERBOARD=1200 ARDUINO_INSTALL_DIR=/root/arduino upload
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
 #
 # If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
 # start upload manually (using stk500) like so:
@@ -59,26 +57,7 @@
 #
 
 # This defines the board to compile for (see boards.h for your board's ID)
-HARDWARE_MOTHERBOARD ?= 1020
-
-ifeq ($(OS),Windows_NT)
-  # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
-else
-  UNAME_S := $(shell uname -s)
-  ifeq ($(UNAME_S),Linux)
-    # Linux
-    ARDUINO_INSTALL_DIR ?= /usr/share/arduino
-    ARDUINO_USER_DIR ?= ${HOME}/Arduino
-  endif
-  ifeq ($(UNAME_S),Darwin)
-    # Darwin (macOS)
-    ARDUINO_INSTALL_DIR ?= /Applications/Arduino.app/Contents/Java
-    ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
-    AVR_TOOLS_PATH ?= /Applications/Arduino.app/Contents/Java/hardware/tools/avr/bin/
-  endif
-endif
+HARDWARE_MOTHERBOARD ?= 11
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
@@ -88,51 +67,42 @@ ARDUINO_VERSION      ?= 106
 # The installed Libraries are in the User folder
 ARDUINO_USER_DIR ?= ${HOME}/Arduino
 
-# You can optionally set a path to the avr-gcc tools.
-# Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
+# You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
 AVR_TOOLS_PATH ?=
 
-# Programmer configuration
+#Programmer configuration
 UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-# On most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
 UPLOAD_PORT        ?= /dev/ttyUSB0
 
-# Directory used to build files in, contains all the build files, from object
-# files to the final hex file on linux it is best to put an absolute path
-# like /home/username/tmp .
+#Directory used to build files in, contains all the build files, from object files to the final hex file
+#on linux it is best to put an absolute path like /home/username/tmp .
 BUILD_DIR          ?= applet
 
 # This defines whether Liquid_TWI2 support will be built
 LIQUID_TWI2        ?= 0
 
-# This defines if Wire is needed
+# this defines if Wire is needed
 WIRE               ?= 0
 
-# This defines if Tone is needed (i.e SPEAKER is defined in Configuration.h)
-# Disabling this (and SPEAKER) saves approximately 350 bytes of memory.
-TONE               ?= 1
+# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+U8GLIB             ?= 1
 
-# This defines if U8GLIB is needed (may require RELOC_WORKAROUND)
-U8GLIB             ?= 0
-
-# This defines whether to include the Trinamic TMCStepper library
-TMC                ?= 0
-
-# This defines whether to include the AdaFruit NeoPixel library
-NEOPIXEL           ?= 0
+# this defines whether to include the Trinamic TMCStepper library
+TMC                ?= 1
 
 ############
 # Try to automatically determine whether RELOC_WORKAROUND is needed based
 # on GCC versions:
-#   https://www.avrfreaks.net/comment/1789106#comment-1789106
+#   http://www.avrfreaks.net/comment/1789106#comment-1789106
 
 CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
 CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
 CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
 CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
 ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
-  $(warning This GCC version $(CC_VER) is likely broken. Enabling relocation workaround.)
+  @echo This version of GCC is likely broken. Enabling relocation workaround.
   RELOC_WORKAROUND = 1
 endif
 
@@ -197,532 +167,302 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1100)
 else ifeq ($(HARDWARE_MOTHERBOARD),1101)
 # Velleman K8400 Controller (derived from 3Drag Controller)
 else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
-# MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS BASE v1.4 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-# MKS BASE v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS BASE v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
-# MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
-# MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# zrib V2.0 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# zrib V5.2 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
-  MCU              ?= atmega1280
-  PROG_MCU         ?= m1280
-# Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Raise3D N series Rumba derivative
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# MakeBoard Mini v2.1.2 by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.3-based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-#   ... Ver 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-#   ... Rev 1.1 (new servo pin order)
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# FYSETC F6 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Wanhao Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# VORON Design
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Tronxy TRONXY-V3-1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
-# Tenlog D3 Hero IDEX printer
-else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1157)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1158)
-# Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1159)
-# Longer LK1 PRO / Alfawise U20 Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1160)
-# Longer LKx PRO / Alfawise Uxx Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1161)
-
-
-# 3Drag Controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1100)
-# Velleman K8200 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1101)
-# Velleman K8400 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1102)
-# Velleman K8600 Controller (Vertex Nano)
 else ifeq ($(HARDWARE_MOTHERBOARD),1103)
-# Velleman K8800 Controller (Vertex Delta)
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
-# 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 # 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
+else ifeq ($(HARDWARE_MOTHERBOARD),1104)
 # MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
+else ifeq ($(HARDWARE_MOTHERBOARD),1105)
 # MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
+else ifeq ($(HARDWARE_MOTHERBOARD),1106)
 # MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+else ifeq ($(HARDWARE_MOTHERBOARD),1107)
 # MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+else ifeq ($(HARDWARE_MOTHERBOARD),1108)
 # MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
+else ifeq ($(HARDWARE_MOTHERBOARD),1109)
 # MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
-# zrib V2.0 control board (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
+else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+# Bigtreetech or BIQU KFB2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+else ifeq ($(HARDWARE_MOTHERBOARD),1114)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),1115)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),1116)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-  MCU              ?= atmega1280
-  PROG_MCU         ?= m1280
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+  MCU ?= atmega1280
 
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
 # Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
 # Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
 # Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
 # Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
 # Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
 # Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
 # MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
 # TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
 # TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
 # Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
 # Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+# Fysetc F6
+else ifeq ($(HARDWARE_MOTHERBOARD),1137)
 # Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
 # VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
 # TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
 # Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
-# MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
-# Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
-# Tenlog D3 Hero
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
-
-#
-# RAMBo and derivatives
-#
-
-# Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1200)
-# Mini-Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1201)
-# Mini-Rambo 1.0a
-else ifeq ($(HARDWARE_MOTHERBOARD),1202)
-# Einsy Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1203)
-# Einsy Retro
-else ifeq ($(HARDWARE_MOTHERBOARD),1204)
-# abee Scoovo X9H
-else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# Rambo ThinkerV2
-else ifeq ($(HARDWARE_MOTHERBOARD),1206)
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 
 #
 # Other ATmega1280, ATmega2560
 #
 
 # Cartesio CN Controls V11
-else ifeq ($(HARDWARE_MOTHERBOARD),1300)
+else ifeq ($(HARDWARE_MOTHERBOARD),1200)
 # Cartesio CN Controls V12
-else ifeq ($(HARDWARE_MOTHERBOARD),1301)
-# Cartesio CN Controls V15
-else ifeq ($(HARDWARE_MOTHERBOARD),1302)
+else ifeq ($(HARDWARE_MOTHERBOARD),1201)
 # Cheaptronic v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1303)
+else ifeq ($(HARDWARE_MOTHERBOARD),1202)
 # Cheaptronic v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1304)
+else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 # Makerbot Mightyboard Revision E
-else ifeq ($(HARDWARE_MOTHERBOARD),1305)
+else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # Megatronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1306)
+else ifeq ($(HARDWARE_MOTHERBOARD),1205)
 # Megatronics v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1307)
+else ifeq ($(HARDWARE_MOTHERBOARD),1206)
 # Megatronics v3.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1308)
+else ifeq ($(HARDWARE_MOTHERBOARD),1207)
 # Megatronics v3.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1309)
+else ifeq ($(HARDWARE_MOTHERBOARD),1208)
 # Megatronics v3.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1310)
+else ifeq ($(HARDWARE_MOTHERBOARD),1209)
+# Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1210)
+# Mini-Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1211)
+# Mini-Rambo 1.0a
+else ifeq ($(HARDWARE_MOTHERBOARD),1212)
+# Einsy Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1213)
+# Einsy Retro
+else ifeq ($(HARDWARE_MOTHERBOARD),1214)
 # Elefu Ra Board (v3)
-else ifeq ($(HARDWARE_MOTHERBOARD),1311)
+else ifeq ($(HARDWARE_MOTHERBOARD),1215)
 # Leapfrog
-else ifeq ($(HARDWARE_MOTHERBOARD),1312)
+else ifeq ($(HARDWARE_MOTHERBOARD),1216)
 # Mega controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1313)
-# Geeetech GT2560 Rev A
-else ifeq ($(HARDWARE_MOTHERBOARD),1314)
-# Geeetech GT2560 Rev A+ (with auto level probe)
-else ifeq ($(HARDWARE_MOTHERBOARD),1315)
-# Geeetech GT2560 Rev B
-else ifeq ($(HARDWARE_MOTHERBOARD),1316)
-# Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+else ifeq ($(HARDWARE_MOTHERBOARD),1217)
+# abee Scoovo X9H
+else ifeq ($(HARDWARE_MOTHERBOARD),1218)
 # Geeetech GT2560 Rev B for Mecreator2
-else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Geeetech GT2560 Rev B for A20(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1320)
+else ifeq ($(HARDWARE_MOTHERBOARD),1219)
+# Geeetech GT2560 Rev. A
+else ifeq ($(HARDWARE_MOTHERBOARD),1220)
+# Geeetech GT2560 Rev. A+ (with auto level probe)
+else ifeq ($(HARDWARE_MOTHERBOARD),1221)
+# Geeetech GT2560 Rev B for A10(M/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1222)
+# Geeetech GT2560 Rev B for A20(M/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1223)
 # Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1321)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1322)
-# Leapfrog Xeed 2015
-else ifeq ($(HARDWARE_MOTHERBOARD),1323)
-# PICA Shield (original version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1324)
-# PICA Shield (rev C or later)
-else ifeq ($(HARDWARE_MOTHERBOARD),1325)
-# Intamsys 4.0 (Funmat HT)
-else ifeq ($(HARDWARE_MOTHERBOARD),1326)
-# Malyan M180 Mainboard Version 2 (no display function, direct gcode only)
-else ifeq ($(HARDWARE_MOTHERBOARD),1327)
-# Geeetech GT2560 Rev B for A20(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1328)
-# Mega controller & Protoneer CNC Shield V3.00
-else ifeq ($(HARDWARE_MOTHERBOARD),1329)
+else ifeq ($(HARDWARE_MOTHERBOARD),1224)
 
 #
 # ATmega1281, ATmega2561
 #
 
-# Minitronics v1.0/1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1400)
+else ifeq ($(HARDWARE_MOTHERBOARD),1300)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
-# Silvergate v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1401)
+else ifeq ($(HARDWARE_MOTHERBOARD),1310)
   MCU              ?= atmega1281
-  PROG_MCU         ?= m1281
 
 #
 # Sanguinololu and Derivatives - ATmega644P, ATmega1284P
 #
 
 # Sanguinololu < 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1500)
+else ifeq ($(HARDWARE_MOTHERBOARD),1400)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sanguinololu 1.2 and above
-else ifeq ($(HARDWARE_MOTHERBOARD),1501)
+else ifeq ($(HARDWARE_MOTHERBOARD),1401)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Melzi
-else ifeq ($(HARDWARE_MOTHERBOARD),1502)
+else ifeq ($(HARDWARE_MOTHERBOARD),1402)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
-# Melzi V2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1503)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi with ATmega1284 (MaKr3d version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1504)
+else ifeq ($(HARDWARE_MOTHERBOARD),1403)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi Creality3D board (for CR-10 etc)
-else ifeq ($(HARDWARE_MOTHERBOARD),1505)
+else ifeq ($(HARDWARE_MOTHERBOARD),1404)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Melzi Malyan M150 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1506)
+else ifeq ($(HARDWARE_MOTHERBOARD),1405)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Tronxy X5S
-else ifeq ($(HARDWARE_MOTHERBOARD),1507)
+else ifeq ($(HARDWARE_MOTHERBOARD),1406)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # STB V1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1508)
+else ifeq ($(HARDWARE_MOTHERBOARD),1407)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Azteeg X1
-else ifeq ($(HARDWARE_MOTHERBOARD),1509)
+else ifeq ($(HARDWARE_MOTHERBOARD),1408)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 # Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1510)
+else ifeq ($(HARDWARE_MOTHERBOARD),1409)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
-# ZoneStar ZMIB V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1511)
-  HARDWARE_VARIANT ?= Sanguino
-  MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
 
 #
 # Other ATmega644P, ATmega644, ATmega1284P
 #
 
 # Gen3 Monolithic Electronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1600)
+else ifeq ($(HARDWARE_MOTHERBOARD),1500)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen3+
-else ifeq ($(HARDWARE_MOTHERBOARD),1601)
+else ifeq ($(HARDWARE_MOTHERBOARD),1501)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6
-else ifeq ($(HARDWARE_MOTHERBOARD),1602)
+else ifeq ($(HARDWARE_MOTHERBOARD),1502)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen6 deluxe
-else ifeq ($(HARDWARE_MOTHERBOARD),1603)
+else ifeq ($(HARDWARE_MOTHERBOARD),1503)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Gen7 custom (Alfons3 Version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1604)
+else ifeq ($(HARDWARE_MOTHERBOARD),1504)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
   F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1605)
+else ifeq ($(HARDWARE_MOTHERBOARD),1505)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1606)
+else ifeq ($(HARDWARE_MOTHERBOARD),1506)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
   F_CPU            ?= 20000000
 # Gen7 v1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1607)
+else ifeq ($(HARDWARE_MOTHERBOARD),1507)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega1284p
-  PROG_MCU         ?= m1284p
   F_CPU            ?= 20000000
 # Alpha OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1608)
+else ifeq ($(HARDWARE_MOTHERBOARD),1508)
   HARDWARE_VARIANT ?= SanguinoA
   MCU              ?= atmega644
-  PROG_MCU         ?= m644
 # Final OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1609)
+else ifeq ($(HARDWARE_MOTHERBOARD),1509)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 # Sethi 3D_1
-else ifeq ($(HARDWARE_MOTHERBOARD),1610)
+else ifeq ($(HARDWARE_MOTHERBOARD),1510)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
-  PROG_MCU         ?= m644p
 
 #
 # Teensyduino - AT90USB1286, AT90USB1286P
 #
 
 # Teensylu
-else ifeq ($(HARDWARE_MOTHERBOARD),1700)
+else ifeq ($(HARDWARE_MOTHERBOARD),1600)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1701)
+else ifeq ($(HARDWARE_MOTHERBOARD),1601)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Printrboard Revision F (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1702)
+else ifeq ($(HARDWARE_MOTHERBOARD),1602)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Brainwave (AT90USB646)
-else ifeq ($(HARDWARE_MOTHERBOARD),1703)
+else ifeq ($(HARDWARE_MOTHERBOARD),1603)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb646
-  PROG_MCU         ?= usb646
 # Brainwave Pro (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1704)
+else ifeq ($(HARDWARE_MOTHERBOARD),1604)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # SAV Mk-I (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1705)
+else ifeq ($(HARDWARE_MOTHERBOARD),1605)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # Teensy++2.0 (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1706)
+else ifeq ($(HARDWARE_MOTHERBOARD),1606)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 # 5DPrint D8 Driver Board
-else ifeq ($(HARDWARE_MOTHERBOARD),1707)
+else ifeq ($(HARDWARE_MOTHERBOARD),1607)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
-  PROG_MCU         ?= usb1286
 
 # UltiMachine Archim1 (with DRV8825 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3023)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
 else ifeq ($(HARDWARE_MOTHERBOARD),3024)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
-  F_CPU             = 84000000
+  F_CPU             = 84000000L
   IS_MCU            = 0
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
 # if you are setting this to something other than 16MHz
-# Do not put the UL suffix, it's done later on.
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
@@ -732,8 +472,7 @@ IS_MCU ?= 1
 ifeq ($(IS_MCU),1)
   # Set to arduino, ATmega2560 if not yet set.
   HARDWARE_VARIANT ?= arduino
-  MCU              ?= atmega2560
-  PROG_MCU         ?= m2560
+  MCU ?= atmega2560
 
   TOOL_PREFIX = avr
   MCU_FLAGS   = -mmcu=$(MCU)
@@ -764,36 +503,27 @@ VPATH += $(BUILD_DIR)
 VPATH += $(HARDWARE_SRC)
 
 ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
 endif
 
 ifeq ($(IS_MCU),1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
 
-  # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
-
 ifeq ($(LIQUID_TWI2), 1)
-  WIRE   = 1
-  VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidTWI2
 endif
 ifeq ($(WIRE), 1)
-  # Old libraries (avr-core 1.6.21 / Arduino < 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
-  # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
@@ -865,23 +595,13 @@ ifeq ($(WIRE), 1)
   LIB_CXXSRC += Wire.cpp
 endif
 
-ifeq ($(TONE), 1)
-  LIB_CXXSRC += Tone.cpp
-endif
-
 ifeq ($(U8GLIB), 1)
   LIB_CXXSRC += U8glib.cpp
-  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c \
-    u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c \
-    u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp \
-    CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp \
-    DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp \
-    SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp \
-    TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
@@ -923,23 +643,17 @@ REMOVE = rm -f
 MV = mv -f
 
 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU)UL ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
+CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
-  CDEFS      += -DUSB_SERIAL
+  CDEFS  += -DUSB_SERIAL
   LIB_SRC    += usb.c pins_teensy.c
   LIB_CXXSRC += usb_api.cpp
 
 else ifeq ($(HARDWARE_VARIANT), archim)
-  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__
-  CDEFS      += -DUSB_VID=0x27B1 -DUSB_PID=0x0001 -DUSBCON
-  CDEFS      += '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT_STRING="Archim"'
-
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp \
-    UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp \
-    PluggableUSB.cpp USBCore.cpp
-
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 
   ifeq ($(U8GLIB), 1)
@@ -960,25 +674,21 @@ CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
 CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
 CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
+CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
           -fshort-enums -ffunction-sections -fdata-sections
 ifneq ($(HARDWARE_MOTHERBOARD),)
   CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
-
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
 CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
 CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
 CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
 ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-
 ifeq ($(HARDWARE_VARIANT), archim)
   LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
   LD_SUFFIX = $(LDLIBS)
-
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty
-  LDFLAGS  += -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
   LD_PREFIX = -Wl,--gc-sections,--relax
   LDFLAGS   = -lm
@@ -994,7 +704,7 @@ else
   AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-  -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
   -b$(UPLOAD_RATE)
 
 # Since Marlin 2.0, the source files may be distributed into several
@@ -1095,7 +805,7 @@ extcoff: $(TARGET).elf
 
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-	  --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -1109,7 +819,7 @@ extcoff: $(TARGET).elf
 
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
 
 # Object files that were found in "src" will be stored in $(BUILD_DIR)
 # in directories that mirror the structure of "src"
@@ -1144,5 +854,5 @@ clean:
 
 .PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
 
-# Automatically include the dependency files created by gcc
+# Automaticaly include the dependency files created by gcc
 -include ${patsubst %.o, %.d, ${OBJ}}

Marlin/Marlin.ino

@@ -1,8 +1,9 @@
-/*==============================================================================
+/*
+================================================================================
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2018 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -11,33 +12,30 @@
 Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
 To configure Marlin you must edit Configuration.h and Configuration_adv.h
-located in the root 'Marlin' folder. Check our Configurations repository to
-see if there's a more suitable starting-point for your specific hardware.
+located in the root 'Marlin' folder. Check the config/examples folder to see if
+there's a more suitable starting-point for your specific hardware.
 
 Before diving in, we recommend the following essential links:
 
 Marlin Firmware Official Website
 
-  - https://marlinfw.org/
+  - http://marlinfw.org/
     The official Marlin Firmware website contains the most up-to-date
     documentation. Contributions are always welcome!
 
 Configuration
 
-  - https://github.com/MarlinFirmware/Configurations
-    Example configurations for several printer models.
-
   - https://www.youtube.com/watch?v=3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
 
-  - https://marlinfw.org/docs/configuration/configuration.html
+  - http://marlinfw.org/docs/configuration/configuration.html
     Marlin's configuration options are explained in more detail here.
 
 Getting Help
 
-  - https://reprap.org/forum/list.php?415
+  - http://forums.reprap.org/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 
@@ -47,11 +45,9 @@ Getting Help
 
 Contributing
 
-  - https://marlinfw.org/docs/development/contributing.html
+  - http://marlinfw.org/docs/development/contributing.html
     If you'd like to contribute to Marlin, read this first!
 
-  - https://marlinfw.org/docs/development/coding_standards.html
+  - http://marlinfw.org/docs/development/coding_standards.html
     Before submitting code get to know the Coding Standards.
-
-
-------------------------------------------------------------------------------*/
+*/

Marlin/Version.h

@@ -1,6 +1,6 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,25 +28,25 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "bugfix-2.0.x"
+#define SHORT_BUILD_VERSION "2.0.5_R10"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2022-04-05"
+#define STRING_DISTRIBUTION_DATE "2020-03-25"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
  */
-//#define MACHINE_NAME "3D Printer"
+#define MACHINE_NAME "TM3D Raptor"
 
 /**
  * The SOURCE_CODE_URL is the location where users will find the Marlin Source
@@ -54,7 +54,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/Raptor_2.0.X"
 
 /**
  * Default generic printer UUID.
@@ -65,12 +65,12 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "marlinfw.org"
+#define WEBSITE_URL "tinymachines3d.com"
 
 /**
  * Set the vendor info the serial USB interface, if changable
  * Currently only supported by DUE platform
  */
-//#define USB_DEVICE_VENDOR_ID           0x0000
-//#define USB_DEVICE_PRODUCT_ID          0x0000
-//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define  USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -0,0 +1,105 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF,
+0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF,
+0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F,
+0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F,
+0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F,
+0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F,
+0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F,
+0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F,
+0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F,
+0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F,
+0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7,
+0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7,
+0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3,
+0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7,
+0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+
+

Marlin/_Statusscreen.h

@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            3
+#define STATUS_LOGO_WIDTH       24
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B10000000,B00000000,B00000001,
+  B10001110,B00000000,B11100001,
+  B10011111,B00000001,B11110001,
+  B10010011,B10000001,B00111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10111001,B11111001,
+  B10001111,B00101000,B11110001,
+  B10000000,B00111000,B00000001,
+  B10000000,B00000000,B00000001,
+  B10011111,B11111111,B11111001,
+  B10010001,B01110100,B10011001,
+  B10011011,B00000110,B10101001,
+  B10011011,B01010100,B10101001,
+  B10011011,B01010110,B10101001,
+  B10011011,B01010100,B10011001,
+  B10011111,B11111111,B11111001,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif

Marlin/lib/readme.txt

@@ -1,36 +0,0 @@
-
-This directory is intended for the project specific (private) libraries.
-PlatformIO will compile them to static libraries and link to executable file.
-
-The source code of each library should be placed in separate directory, like
-"lib/private_lib/[here are source files]".
-
-For example, see how can be organized `Foo` and `Bar` libraries:
-
-|--lib
-|  |--Bar
-|  |  |--docs
-|  |  |--examples
-|  |  |--src
-|  |     |- Bar.c
-|  |     |- Bar.h
-|  |--Foo
-|  |  |- Foo.c
-|  |  |- Foo.h
-|  |- readme.txt --> THIS FILE
-|- platformio.ini
-|--src
-   |- main.c
-
-Then in `src/main.c` you should use:
-
-#include <Foo.h>
-#include <Bar.h>
-
-// rest H/C/CPP code
-
-PlatformIO will find your libraries automatically, configure preprocessor's
-include paths and build them.
-
-More information about PlatformIO Library Dependency Finder
-- https://docs.platformio.org/page/librarymanager/ldf.html

Marlin/src/HAL/AVR/HAL.cpp

@@ -16,51 +16,26 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
-#ifdef USBCON
-  DefaultSerial1 MSerial0(false, Serial);
-  #ifdef BLUETOOTH
-    BTSerial btSerial(false, bluetoothSerial);
-  #endif
-#endif
-
 // ------------------------
 // Public Variables
 // ------------------------
 
-// Don't initialize/override variable (which would happen in .init4)
-uint8_t MarlinHAL::reset_reason __attribute__((section(".noinit")));
+//uint8_t MCUSR;
 
 // ------------------------
 // Public functions
 // ------------------------
 
-__attribute__((naked))             // Don't output function pro- and epilogue
-__attribute__((used))              // Output the function, even if "not used"
-__attribute__((section(".init3"))) // Put in an early user definable section
-void save_reset_reason() {
-  #if ENABLED(OPTIBOOT_RESET_REASON)
-    __asm__ __volatile__(
-      A("STS %0, r2")
-      : "=m"(hal.reset_reason)
-    );
-  #else
-    hal.reset_reason = MCUSR;
-  #endif
-
-  // Clear within 16ms since WDRF bit enables a 16ms watchdog timer -> Boot loop
-  hal.clear_reset_source();
-  wdt_disable();
-}
-
-void MarlinHAL::init() {
+void HAL_init() {
   // Init Servo Pins
   #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
   #if HAS_SERVO_0
@@ -75,17 +50,6 @@ void MarlinHAL::init() {
   #if HAS_SERVO_3
     INIT_SERVO(3);
   #endif
-
-  init_pwm_timers();   // Init user timers to default frequency - 1000HZ
-}
-
-void MarlinHAL::reboot() {
-  #if ENABLED(USE_WATCHDOG)
-    while (1) { /* run out the watchdog */ }
-  #else
-    void (*resetFunc)() = 0;  // Declare resetFunc() at address 0
-    resetFunc();              // Jump to address 0
-  #endif
 }
 
 #if ENABLED(SDSUPPORT)
@@ -95,20 +59,20 @@ void MarlinHAL::reboot() {
 
 #else // !SDSUPPORT
 
-  extern "C" {
-    extern char __bss_end;
-    extern char __heap_start;
-    extern void* __brkval;
+extern "C" {
+  extern char __bss_end;
+  extern char __heap_start;
+  extern void* __brkval;
 
-    int freeMemory() {
-      int free_memory;
-      if ((int)__brkval == 0)
-        free_memory = ((int)&free_memory) - ((int)&__bss_end);
-      else
-        free_memory = ((int)&free_memory) - ((int)__brkval);
-      return free_memory;
-    }
+  int freeMemory() {
+    int free_memory;
+    if ((int)__brkval == 0)
+      free_memory = ((int)&free_memory) - ((int)&__bss_end);
+    else
+      free_memory = ((int)&free_memory) - ((int)__brkval);
+    return free_memory;
   }
+}
 
 #endif // !SDSUPPORT
 

Marlin/src/HAL/AVR/HAL.h

@@ -14,8 +14,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #pragma once
 
@@ -39,19 +38,6 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 
-//
-// Default graphical display delays
-//
-#if F_CPU >= 20000000
-  #define CPU_ST7920_DELAY_1 150
-  #define CPU_ST7920_DELAY_2   0
-  #define CPU_ST7920_DELAY_3 150
-#elif F_CPU == 16000000
-  #define CPU_ST7920_DELAY_1 125
-  #define CPU_ST7920_DELAY_2   0
-  #define CPU_ST7920_DELAY_3 188
-#endif
-
 #ifndef pgm_read_ptr
   // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
   // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
@@ -64,97 +50,343 @@
 // Defines
 // ------------------------
 
-// AVR PROGMEM extension for sprintf_P
-#define S_FMT "%S"
-
-// AVR PROGMEM extension for string define
-#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
+//#define analogInputToDigitalPin(IO) IO
 
 #ifndef CRITICAL_SECTION_START
   #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
   #define CRITICAL_SECTION_END()    SREG = _sreg
 #endif
+#define ISRS_ENABLED() TEST(SREG, SREG_I)
+#define ENABLE_ISRS()  sei()
+#define DISABLE_ISRS() cli()
 
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-#define PWM_FREQUENCY 1000     // Default PWM frequency when set_pwm_duty() is called without set_pwm_frequency()
+// On AVR this is in math.h?
+//#define square(x) ((x)*(x))
 
 // ------------------------
 // Types
 // ------------------------
 
+typedef uint16_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFF
+
 typedef int8_t pin_t;
 
-#define SHARED_SERVOS HAS_SERVOS  // Use shared/servos.cpp
-
-class Servo;
-typedef Servo hal_servo_t;
+#define SHARED_SERVOS HAS_SERVOS
+#define HAL_SERVO_LIB Servo
 
 // ------------------------
+// Public Variables
+// ------------------------
+
+//extern uint8_t MCUSR;
+
 // Serial ports
-// ------------------------
-
 #ifdef USBCON
-  #include "../../core/serial_hook.h"
-  typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-  extern DefaultSerial1 MSerial0;
-  #ifdef BLUETOOTH
-    typedef ForwardSerial1Class< decltype(bluetoothSerial) > BTSerial;
-    extern BTSerial btSerial;
+  #if ENABLED(BLUETOOTH)
+    #define MYSERIAL0 bluetoothSerial
+  #else
+    #define MYSERIAL0 Serial
   #endif
-
-  #define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
+  #define NUM_SERIAL 1
 #else
   #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
-  #define MYSERIAL1 customizedSerial1
+
+  #define MYSERIAL0 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
+      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #elif SERIAL_PORT_2 == SERIAL_PORT
+      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
     #endif
-    #define MYSERIAL2 customizedSerial2
-  #endif
-
-  #ifdef SERIAL_PORT_3
-    #if !WITHIN(SERIAL_PORT_3, -1, 3)
-      #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
-    #endif
-    #define MYSERIAL3 customizedSerial3
+    #define MYSERIAL1 customizedSerial2
+    #define NUM_SERIAL 2
+  #else
+    #define NUM_SERIAL 1
   #endif
 #endif
 
-#ifdef MMU2_SERIAL_PORT
-  #if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
-    #error "MMU2_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+#ifdef DGUS_SERIAL_PORT
+  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == SERIAL_PORT
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
   #endif
-  #define MMU2_SERIAL mmuSerial
+  #define DGUS_SERIAL internalDgusSerial
+
+  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
 #endif
 
-#ifdef LCD_SERIAL_PORT
-  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
-    #error "LCD_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
-  #endif
-  #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
-  #endif
-#endif
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_init();
+
+//void cli();
+
+//void _delay_ms(const int delay);
+
+inline void HAL_clear_reset_source() { MCUSR = 0; }
+inline uint8_t HAL_get_reset_source() { return MCUSR; }
+
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Wunused-function"
+extern "C" {
+  int freeMemory();
+}
+#pragma GCC diagnostic pop
+
+// timers
+#define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
+
+#define STEP_TIMER_NUM          1
+#define TEMP_TIMER_NUM          0
+#define PULSE_TIMER_NUM         STEP_TIMER_NUM
+
+#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
+
+#define STEPPER_TIMER_RATE      HAL_TIMER_RATE
+#define STEPPER_TIMER_PRESCALE  8
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
+
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT()  SBI(TIMSK1, OCIE1A)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
+#define STEPPER_ISR_ENABLED()             TEST(TIMSK1, OCIE1A)
+
+#define ENABLE_TEMPERATURE_INTERRUPT()     SBI(TIMSK0, OCIE0B)
+#define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0B)
+#define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0B)
+
+FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
+  switch (timer_num) {
+    case STEP_TIMER_NUM:
+      // waveform generation = 0100 = CTC
+      SET_WGM(1, CTC_OCRnA);
+
+      // output mode = 00 (disconnected)
+      SET_COMA(1, NORMAL);
+
+      // Set the timer pre-scaler
+      // Generally we use a divider of 8, resulting in a 2MHz timer
+      // frequency on a 16MHz MCU. If you are going to change this, be
+      // sure to regenerate speed_lookuptable.h with
+      // create_speed_lookuptable.py
+      SET_CS(1, PRESCALER_8);  //  CS 2 = 1/8 prescaler
+
+      // Init Stepper ISR to 122 Hz for quick starting
+      // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
+      OCR1A = 0x4000;
+      TCNT1 = 0;
+      break;
+
+    case TEMP_TIMER_NUM:
+      // Use timer0 for temperature measurement
+      // Interleave temperature interrupt with millies interrupt
+      OCR0B = 128;
+      break;
+  }
+}
+
+#define TIMER_OCR_1             OCR1A
+#define TIMER_COUNTER_1         TCNT1
+
+#define TIMER_OCR_0             OCR0A
+#define TIMER_COUNTER_0         TCNT0
+
+#define _CAT(a,V...) a##V
+#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
+#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
+#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
+
+/**
+ * On AVR there is no hardware prioritization and preemption of
+ * interrupts, so this emulates it. The UART has first priority
+ * (otherwise, characters will be lost due to UART overflow).
+ * Then: Stepper, Endstops, Temperature, and -finally- all others.
+ */
+#define HAL_timer_isr_prologue(TIMER_NUM)
+#define HAL_timer_isr_epilogue(TIMER_NUM)
+
+/* 18 cycles maximum latency */
+#define HAL_STEP_TIMER_ISR() \
+extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER1_COMPA_vect() { \
+  __asm__ __volatile__ ( \
+    A("push r16")                      /* 2 Save R16 */ \
+    A("in r16, __SREG__")              /* 1 Get SREG */ \
+    A("push r16")                      /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")            /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("push r16")                      /* 2 Save TIMSK0 into the stack */ \
+    A("andi r16,~%[msk0]")             /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")            /* 2 And set the new value */ \
+    A("lds r16, %[timsk1]")            /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
+    A("andi r16,~%[msk1]")             /* 1 Disable the stepper ISR */ \
+    A("sts %[timsk1], r16")            /* 2 And set the new value */ \
+    A("push r16")                      /* 2 Save TIMSK1 into stack */ \
+    A("in r16, 0x3B")                  /* 1 Get RAMPZ register */ \
+    A("push r16")                      /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                  /* 1 Get EIND register */ \
+    A("push r0")                       /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                       \
+    A("push r18")                      \
+    A("push r19")                      \
+    A("push r20")                      \
+    A("push r21")                      \
+    A("push r22")                      \
+    A("push r23")                      \
+    A("push r24")                      \
+    A("push r25")                      \
+    A("push r26")                      \
+    A("push r27")                      \
+    A("push r30")                      \
+    A("push r31")                      \
+    A("clr r1")                        /* C runtime expects this register to be 0 */ \
+    A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                       \
+    A("pop r30")                       \
+    A("pop r27")                       \
+    A("pop r26")                       \
+    A("pop r25")                       \
+    A("pop r24")                       \
+    A("pop r23")                       \
+    A("pop r22")                       \
+    A("pop r21")                       \
+    A("pop r20")                       \
+    A("pop r19")                       \
+    A("pop r18")                       \
+    A("pop r1")                        \
+    A("pop r0")                        \
+    A("out 0x3C, r16")                 /* 1 Restore EIND register */ \
+    A("pop r16")                       /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                 /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                       /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
+    A("ori r16,%[msk1]")               /* 1 Reenable the stepper ISR */ \
+    A("cli")                           /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
+    A("sts %[timsk1], r16")            /* 2 And restore the old value - This reenables the stepper ISR */ \
+    A("pop r16")                       /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
+    A("sts %[timsk0], r16")            /* 2 And restore the old value - This reenables the temperature ISR */ \
+    A("pop r16")                       /* 2 Get the old SREG value */ \
+    A("out __SREG__, r16")             /* 1 And restore the SREG value */ \
+    A("pop r16")                       /* 2 Restore R16 value */ \
+    A("reti")                          /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i" ((uint16_t)&TIMSK0), \
+      [timsk1] "i" ((uint16_t)&TIMSK1), \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)),\
+      [msk1] "M" ((uint8_t)(1<<OCIE1A)) \
+    : \
+  ); \
+} \
+void TIMER1_COMPA_vect_bottom()
+
+/* 14 cycles maximum latency */
+#define HAL_TEMP_TIMER_ISR() \
+extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER0_COMPB_vect_bottom()  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER0_COMPB_vect() { \
+  __asm__ __volatile__ ( \
+    A("push r16")                       /* 2 Save R16 */ \
+    A("in r16, __SREG__")               /* 1 Get SREG */ \
+    A("push r16")                       /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")             /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("andi r16,~%[msk0]")              /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")             /* 2 And set the new value */ \
+    A("sei")                            /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */    \
+    A("push r16")                       /* 2 Save TIMSK0 into stack */ \
+    A("in r16, 0x3B")                   /* 1 Get RAMPZ register */ \
+    A("push r16")                       /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                   /* 1 Get EIND register */ \
+    A("push r0")                        /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                        \
+    A("push r18")                       \
+    A("push r19")                       \
+    A("push r20")                       \
+    A("push r21")                       \
+    A("push r22")                       \
+    A("push r23")                       \
+    A("push r24")                       \
+    A("push r25")                       \
+    A("push r26")                       \
+    A("push r27")                       \
+    A("push r30")                       \
+    A("push r31")                       \
+    A("clr r1")                         /* C runtime expects this register to be 0 */ \
+    A("call TIMER0_COMPB_vect_bottom")  /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                        \
+    A("pop r30")                        \
+    A("pop r27")                        \
+    A("pop r26")                        \
+    A("pop r25")                        \
+    A("pop r24")                        \
+    A("pop r23")                        \
+    A("pop r22")                        \
+    A("pop r21")                        \
+    A("pop r20")                        \
+    A("pop r19")                        \
+    A("pop r18")                        \
+    A("pop r1")                         \
+    A("pop r0")                         \
+    A("out 0x3C, r16")                  /* 1 Restore EIND register */ \
+    A("pop r16")                        /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                  /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                        /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
+    A("ori r16,%[msk0]")                /* 1 Enable temperature ISR */ \
+    A("cli")                            /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
+    A("sts %[timsk0], r16")             /* 2 And restore the old value */ \
+    A("pop r16")                        /* 2 Get the old SREG */ \
+    A("out __SREG__, r16")              /* 1 And restore the SREG value */ \
+    A("pop r16")                        /* 2 Restore R16 */ \
+    A("reti")                           /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i"((uint16_t)&TIMSK0),  \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)) \
+    : \
+  ); \
+} \
+void TIMER0_COMPB_vect_bottom()
 
-//
 // ADC
-//
-#define HAL_ADC_VREF        5.0
-#define HAL_ADC_RESOLUTION 10
+#ifdef DIDR2
+  #define HAL_ANALOG_SELECT(ind) do{ if (ind < 8) SBI(DIDR0, ind); else SBI(DIDR2, ind & 0x07); }while(0)
+#else
+  #define HAL_ANALOG_SELECT(ind) SBI(DIDR0, ind);
+#endif
+
+inline void HAL_adc_init() {
+  ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
+  DIDR0 = 0;
+  #ifdef DIDR2
+    DIDR2 = 0;
+  #endif
+}
+
+#define SET_ADMUX_ADCSRA(ch) ADMUX = _BV(REFS0) | (ch & 0x07); SBI(ADCSRA, ADSC)
+#ifdef MUX5
+  #define HAL_START_ADC(ch) if (ch > 7) ADCSRB = _BV(MUX5); else ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#else
+  #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
+#endif
+
+#define HAL_ADC_RESOLUTION 10
+#define HAL_READ_ADC()  ADC
+#define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
 
-//
-// Pin Mapping for M42, M43, M226
-//
 #define GET_PIN_MAP_PIN(index) index
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-#define HAL_SENSITIVE_PINS 0, 1,
+#define HAL_SENSITIVE_PINS 0, 1
 
 #ifdef __AVR_AT90USB1286__
   #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
@@ -163,109 +395,21 @@ typedef Servo hal_servo_t;
 // AVR compatibility
 #define strtof strtod
 
-// ------------------------
-// Class Utilities
-// ------------------------
+/**
+ *  set_pwm_frequency
+ *  Sets the frequency of the timer corresponding to the provided pin
+ *  as close as possible to the provided desired frequency. Internally
+ *  calculates the required waveform generation mode, prescaler and
+ *  resolution values required and sets the timer registers accordingly.
+ *  NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
+ *  NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST FAN PWM Settings)
+ */
+void set_pwm_frequency(const pin_t pin, int f_desired);
 
-#pragma GCC diagnostic push
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-extern "C" int freeMemory();
-
-#pragma GCC diagnostic pop
-
-// ------------------------
-// MarlinHAL Class
-// ------------------------
-
-class MarlinHAL {
-public:
-
-  // Earliest possible init, before setup()
-  MarlinHAL() {}
-
-  static void init();          // Called early in setup()
-  static void init_board() {}  // Called less early in setup()
-  static void reboot();        // Restart the firmware from 0x0
-
-  // Interrupts
-  static bool isr_state() { return TEST(SREG, SREG_I); }
-  static void isr_on()  { sei(); }
-  static void isr_off() { cli(); }
-
-  static void delay_ms(const int ms) { _delay_ms(ms); }
-
-  // Tasks, called from idle()
-  static void idletask() {}
-
-  // Reset
-  static uint8_t reset_reason;
-  static uint8_t get_reset_source() { return reset_reason; }
-  static void clear_reset_source() { MCUSR = 0; }
-
-  // Free SRAM
-  static int freeMemory() { return ::freeMemory(); }
-
-  //
-  // ADC Methods
-  //
-
-  // Called by Temperature::init once at startup
-  static void adc_init() {
-    ADCSRA = _BV(ADEN) | _BV(ADSC) | _BV(ADIF) | 0x07;
-    DIDR0 = 0;
-    #ifdef DIDR2
-      DIDR2 = 0;
-    #endif
-  }
-
-  // Called by Temperature::init for each sensor at startup
-  static void adc_enable(const uint8_t ch) {
-    #ifdef DIDR2
-      if (ch > 7) { SBI(DIDR2, ch & 0x07); return; }
-    #endif
-    SBI(DIDR0, ch);
-  }
-
-  // Begin ADC sampling on the given channel. Called from Temperature::isr!
-  static void adc_start(const uint8_t ch) {
-    #ifdef MUX5
-      ADCSRB = ch > 7 ? _BV(MUX5) : 0;
-    #else
-      ADCSRB = 0;
-    #endif
-    ADMUX = _BV(REFS0) | (ch & 0x07);
-    SBI(ADCSRA, ADSC);
-  }
-
-  // Is the ADC ready for reading?
-  static bool adc_ready() { return !TEST(ADCSRA, ADSC); }
-
-  // The current value of the ADC register
-  static __typeof__(ADC) adc_value() { return ADC; }
-
-  /**
-   * init_pwm_timers
-   * Set the default frequency for timers 2-5 to 1000HZ
-   */
-  static void init_pwm_timers();
-
-  /**
-   * Set the PWM duty cycle for the pin to the given value.
-   * Optionally invert the duty cycle [default = false]
-   * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
-   */
-  static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
-
-  /**
-   * Set the frequency of the timer for the given pin as close as
-   * possible to the provided desired frequency. Internally calculate
-   * the required waveform generation mode, prescaler, and resolution
-   * values and set timer registers accordingly.
-   * NOTE that the frequency is applied to all pins on the timer (Ex OC3A, OC3B and OC3B)
-   * NOTE that there are limitations, particularly if using TIMER2. (see Configuration_adv.h -> FAST_PWM_FAN Settings)
-   */
-  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
-};
+/**
+ * set_pwm_duty
+ *  Sets the PWM duty cycle of the provided pin to the provided value
+ *  Optionally allows inverting the duty cycle [default = false]
+ *  Optionally allows changing the maximum size of the provided value to enable finer PWM duty control [default = 255]
+ */
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -34,21 +34,21 @@
 #include "../../inc/MarlinConfig.h"
 
 void spiBegin() {
-  #if PIN_EXISTS(SD_SS)
-    // Do not init HIGH for boards with pin 4 used as Fans or Heaters or otherwise, not likely to have multiple SPI devices anyway.
-    #if defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-      // SS must be in output mode even it is not chip select
-      SET_OUTPUT(SD_SS_PIN);
-    #else
-      // set SS high - may be chip select for another SPI device
-      OUT_WRITE(SD_SS_PIN, HIGH);
-    #endif
-  #endif
-  SET_OUTPUT(SD_SCK_PIN);
-  SET_INPUT(SD_MISO_PIN);
-  SET_OUTPUT(SD_MOSI_PIN);
+  OUT_WRITE(SS_PIN, HIGH);
+  SET_OUTPUT(SCK_PIN);
+  SET_INPUT(MISO_PIN);
+  SET_OUTPUT(MOSI_PIN);
 
-  IF_DISABLED(SOFTWARE_SPI, spiInit(SPI_HALF_SPEED));
+  #if DISABLED(SOFTWARE_SPI)
+    // SS must be in output mode even it is not chip select
+    //SET_OUTPUT(SS_PIN);
+    // set SS high - may be chip select for another SPI device
+    //#if SET_SPI_SS_HIGH
+      //WRITE(SS_PIN, HIGH);
+    //#endif
+    // set a default rate
+    spiInit(1);
+  #endif
 }
 
 #if NONE(SOFTWARE_SPI, FORCE_SOFT_SPI)
@@ -74,8 +74,7 @@ void spiBegin() {
       #elif defined(PRR0)
         PRR0
       #endif
-      , PRSPI
-    );
+        , PRSPI);
 
     SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
     SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
@@ -89,7 +88,7 @@ void spiBegin() {
   }
 
   /** SPI read data  */
-  void spiRead(uint8_t *buf, uint16_t nbyte) {
+  void spiRead(uint8_t* buf, uint16_t nbyte) {
     if (nbyte-- == 0) return;
     SPDR = 0xFF;
     for (uint16_t i = 0; i < nbyte; i++) {
@@ -108,7 +107,7 @@ void spiBegin() {
   }
 
   /** SPI send block  */
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+  void spiSendBlock(uint8_t token, const uint8_t* buf) {
     SPDR = token;
     for (uint16_t i = 0; i < 512; i += 2) {
       while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
@@ -196,19 +195,19 @@ void spiBegin() {
     // no interrupts during byte receive - about 8µs
     cli();
     // output pin high - like sending 0xFF
-    WRITE(SD_MOSI_PIN, HIGH);
+    WRITE(MOSI_PIN, HIGH);
 
     LOOP_L_N(i, 8) {
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
       nop;
 
       data <<= 1;
 
-      if (READ(SD_MISO_PIN)) data |= 1;
+      if (READ(MISO_PIN)) data |= 1;
 
-      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SCK_PIN, LOW);
     }
 
     sei();
@@ -216,7 +215,7 @@ void spiBegin() {
   }
 
   // Soft SPI read data
-  void spiRead(uint8_t *buf, uint16_t nbyte) {
+  void spiRead(uint8_t* buf, uint16_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       buf[i] = spiRec();
   }
@@ -226,10 +225,10 @@ void spiBegin() {
     // no interrupts during byte send - about 8µs
     cli();
     LOOP_L_N(i, 8) {
-      WRITE(SD_SCK_PIN, LOW);
-      WRITE(SD_MOSI_PIN, data & 0x80);
+      WRITE(SCK_PIN, LOW);
+      WRITE(MOSI_PIN, data & 0x80);
       data <<= 1;
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
     }
 
     nop; // hold SCK high for a few ns
@@ -237,13 +236,13 @@ void spiBegin() {
     nop;
     nop;
 
-    WRITE(SD_SCK_PIN, LOW);
+    WRITE(SCK_PIN, LOW);
 
     sei();
   }
 
   // Soft SPI send block
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+  void spiSendBlock(uint8_t token, const uint8_t* buf) {
     spiSend(token);
     for (uint16_t i = 0; i < 512; i++)
       spiSend(buf[i]);

Marlin/src/HAL/AVR/MarlinSPI.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <SPI.h>
-
-using MarlinSPI = SPIClass;

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -34,7 +34,6 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
-#include "../../core/serial_hook.h"
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -49,11 +48,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
   #else
-    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
+    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -136,6 +135,10 @@
     UART_DECL(3);
   #endif
 
+  #define DEC 10
+  #define HEX 16
+  #define OCT 8
+  #define BIN 2
   #define BYTE 0
 
   // Templated type selector
@@ -191,38 +194,66 @@
                    rx_framing_errors;
     static ring_buffer_pos_t rx_max_enqueued;
 
-    FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_head();
+    static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_head();
 
     static volatile bool rx_tail_value_not_stable;
     static volatile uint16_t rx_tail_value_backup;
 
-    FORCE_INLINE static void atomic_set_rx_tail(ring_buffer_pos_t value);
-    FORCE_INLINE static ring_buffer_pos_t atomic_read_rx_tail();
+    static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
+    static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
+
+    public:
 
-  public:
     FORCE_INLINE static void store_rxd_char();
     FORCE_INLINE static void _tx_udr_empty_irq();
 
-  public:
-    static void begin(const long);
-    static void end();
-    static int peek();
-    static int read();
-    static void flush();
-    static ring_buffer_pos_t available();
-    static void write(const uint8_t c);
-    static void flushTX();
-    #if HAS_DGUS_LCD
-      static ring_buffer_pos_t get_tx_buffer_free();
-    #endif
+    public:
+      MarlinSerial() {};
+      static void begin(const long);
+      static void end();
+      static int peek();
+      static int read();
+      static void flush();
+      static ring_buffer_pos_t available();
+      static void write(const uint8_t c);
+      static void flushTX();
+      #ifdef DGUS_SERIAL_PORT
+        static ring_buffer_pos_t get_tx_buffer_free();
+      #endif
 
-    enum { HasEmergencyParser = Cfg::EMERGENCYPARSER };
-    static bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+      FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
+      FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
+      FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
+      FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
 
-    FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
-    FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
-    FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
-    FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
+      FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
+      FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
+      FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
+      FORCE_INLINE static void print(const char* str) { write(str); }
+
+      static void print(char, int = BYTE);
+      static void print(unsigned char, int = BYTE);
+      static void print(int, int = DEC);
+      static void print(unsigned int, int = DEC);
+      static void print(long, int = DEC);
+      static void print(unsigned long, int = DEC);
+      static void print(double, int = 2);
+
+      static void println(const String& s);
+      static void println(const char[]);
+      static void println(char, int = BYTE);
+      static void println(unsigned char, int = BYTE);
+      static void println(int, int = DEC);
+      static void println(unsigned int, int = DEC);
+      static void println(long, int = DEC);
+      static void println(unsigned long, int = DEC);
+      static void println(double, int = 2);
+      static void println();
+      operator bool() { return true; }
+
+    private:
+      static void printNumber(unsigned long, const uint8_t);
+      static void printFloat(double, uint8_t);
   };
 
   template <uint8_t serial>
@@ -237,61 +268,51 @@
     static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
     static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
   };
-
-  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
-  extern MSerialT1 customizedSerial1;
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
 
   #ifdef SERIAL_PORT_2
-    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
-    extern MSerialT2 customizedSerial2;
-  #endif
 
-  #ifdef SERIAL_PORT_3
-    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
-    extern MSerialT3 customizedSerial3;
+    extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
   #endif
 
 #endif // !USBCON
 
-#ifdef MMU2_SERIAL_PORT
+#ifdef INTERNAL_SERIAL_PORT
   template <uint8_t serial>
-  struct MMU2SerialCfg {
+  struct MarlinInternalSerialCfg {
     static constexpr int PORT               = serial;
     static constexpr unsigned int RX_SIZE   = 32;
     static constexpr unsigned int TX_SIZE   = 32;
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_OVERRUNS       = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr bool RX_OVERRUNS       = false;
   };
 
-  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
-  extern MSerialMMU2 mmuSerial;
+  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
 #endif
 
-#ifdef LCD_SERIAL_PORT
-
+#ifdef DGUS_SERIAL_PORT
   template <uint8_t serial>
-  struct LCDSerialCfg {
+  struct MarlinInternalSerialCfg {
     static constexpr int PORT               = serial;
-    static constexpr unsigned int RX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_RX_BUFFER_SIZE,  64);
-    static constexpr unsigned int TX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_TX_BUFFER_SIZE, 128);
+    static constexpr unsigned int RX_SIZE   = 128;
+    static constexpr unsigned int TX_SIZE   = 48;
     static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
+    static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
+    static constexpr bool RX_OVERRUNS       = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
   };
 
-  typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;
-  extern MSerialLCD lcdSerial;
+  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations
 #if defined(USBCON) && ENABLED(BLUETOOTH)
-  typedef Serial1Class<HardwareSerial> MSerialBT;
-  extern MSerialBT bluetoothSerial;
+  extern HardwareSerial bluetoothSerial;
 #endif

Marlin/src/HAL/AVR/Servo.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -48,6 +48,7 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
+ *
  */
 
 #ifdef __AVR__
@@ -58,6 +59,7 @@
 
 #include <avr/interrupt.h>
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/AVR/ServoTimers.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -59,12 +59,10 @@
 // Say which 16 bit timers can be used and in what order
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define _useTimer1
+  #define _useTimer3
   #define _useTimer4
-  #if NUM_SERVOS > SERVOS_PER_TIMER
-    #define _useTimer3
-    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
-      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
-    #endif
+  #if !HAS_MOTOR_CURRENT_PWM
+    #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
   #endif
 #elif defined(__AVR_ATmega32U4__)
   #define _useTimer3

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -124,7 +124,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
       pciSetup(X_MAX_PIN);
     #endif
   #endif
@@ -132,7 +132,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
       pciSetup(X_MIN_PIN);
     #endif
   #endif
@@ -140,7 +140,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
       pciSetup(Y_MAX_PIN);
     #endif
   #endif
@@ -148,7 +148,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
       pciSetup(Y_MIN_PIN);
     #endif
   #endif
@@ -156,7 +156,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
       pciSetup(Z_MAX_PIN);
     #endif
   #endif
@@ -164,105 +164,15 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
       pciSetup(Z_MIN_PIN);
     #endif
   #endif
-  #if HAS_I_MAX
-    #if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(I_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
-      pciSetup(I_MAX_PIN);
-    #endif
-  #elif HAS_I_MIN
-    #if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(I_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
-      pciSetup(I_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_J_MAX
-    #if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(J_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
-      pciSetup(J_MAX_PIN);
-    #endif
-  #elif HAS_J_MIN
-    #if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(J_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
-      pciSetup(J_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_K_MAX
-    #if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(K_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
-      pciSetup(K_MAX_PIN);
-    #endif
-  #elif HAS_K_MIN
-    #if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(K_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
-      pciSetup(K_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_U_MAX
-    #if (digitalPinToInterrupt(U_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(U_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(U_MAX_PIN), "U_MAX_PIN is not interrupt-capable");
-      pciSetup(U_MAX_PIN);
-    #endif
-  #elif HAS_U_MIN
-    #if (digitalPinToInterrupt(U_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(U_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(U_MIN_PIN), "U_MIN_PIN is not interrupt-capable");
-      pciSetup(U_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_V_MAX
-    #if (digitalPinToInterrupt(V_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(V_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(V_MAX_PIN), "V_MAX_PIN is not interrupt-capable");
-      pciSetup(V_MAX_PIN);
-    #endif
-  #elif HAS_V_MIN
-    #if (digitalPinToInterrupt(V_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(V_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(V_MIN_PIN), "V_MIN_PIN is not interrupt-capable");
-      pciSetup(V_MIN_PIN);
-    #endif
-  #endif
-  #if HAS_W_MAX
-    #if (digitalPinToInterrupt(W_MAX_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(W_MAX_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(W_MAX_PIN), "W_MAX_PIN is not interrupt-capable");
-      pciSetup(W_MAX_PIN);
-    #endif
-  #elif HAS_W_MIN
-    #if (digitalPinToInterrupt(W_MIN_PIN) != NOT_AN_INTERRUPT)
-      _ATTACH(W_MIN_PIN);
-    #else
-      static_assert(digitalPinHasPCICR(W_MIN_PIN), "W_MIN_PIN is not interrupt-capable");
-      pciSetup(W_MIN_PIN);
-    #endif
-  #endif
   #if HAS_X2_MAX
     #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
       pciSetup(X2_MAX_PIN);
     #endif
   #endif
@@ -270,7 +180,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
       pciSetup(X2_MIN_PIN);
     #endif
   #endif
@@ -278,7 +188,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
       pciSetup(Y2_MAX_PIN);
     #endif
   #endif
@@ -286,7 +196,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
       pciSetup(Y2_MIN_PIN);
     #endif
   #endif
@@ -294,7 +204,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
       pciSetup(Z2_MAX_PIN);
     #endif
   #endif
@@ -302,7 +212,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
       pciSetup(Z2_MIN_PIN);
     #endif
   #endif
@@ -310,7 +220,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
       pciSetup(Z3_MAX_PIN);
     #endif
   #endif
@@ -318,7 +228,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
       pciSetup(Z3_MIN_PIN);
     #endif
   #endif
@@ -326,7 +236,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable");
       pciSetup(Z4_MAX_PIN);
     #endif
   #endif
@@ -334,7 +244,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable");
       pciSetup(Z4_MIN_PIN);
     #endif
   #endif
@@ -342,7 +252,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PROBE_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -16,12 +16,16 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
 
-#include "../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
+
+#include "HAL.h"
 
 struct Timer {
   volatile uint8_t* TCCRnQ[3];  // max 3 TCCR registers per timer
@@ -29,194 +33,250 @@ struct Timer {
   volatile uint16_t* ICRn;      // max 1 ICR register per timer
   uint8_t n;                    // the timer number [0->5]
   uint8_t q;                    // the timer output [0->2] (A->C)
-  bool isPWM;                   // True if pin is a "hardware timer"
-  bool isProtected;             // True if timer is protected
 };
 
-// Macros for the Timer structure
-#define _SET_WGMnQ(T, V) do{ \
-    *(T.TCCRnQ)[0] = (*(T.TCCRnQ)[0] & ~(0x3 << 0)) | (( int(V)       & 0x3) << 0); \
-    *(T.TCCRnQ)[1] = (*(T.TCCRnQ)[1] & ~(0x3 << 3)) | (((int(V) >> 2) & 0x3) << 3); \
-  }while(0)
-
-// Set TCCR CS bits
-#define _SET_CSn(T, V) (*(T.TCCRnQ)[1] = (*(T.TCCRnQ[1]) & ~(0x7 << 0)) | ((int(V) & 0x7) << 0))
-
-// Set TCCR COM bits
-#define _SET_COMnQ(T, Q, V) (*(T.TCCRnQ)[0] = (*(T.TCCRnQ)[0] & ~(0x3 << (6-2*(Q)))) | (int(V) << (6-2*(Q))))
-
-// Set OCRnQ register
-#define _SET_OCRnQ(T, Q, V) (*(T.OCRnQ)[Q] = int(V) & 0xFFFF)
-
-// Set ICRn register (one per timer)
-#define _SET_ICRn(T, V) (*(T.ICRn) = int(V) & 0xFFFF)
-
 /**
- * Return a Timer struct describing a pin's timer.
+ * get_pwm_timer
+ *  Get the timer information and register of the provided pin.
+ *  Return a Timer struct containing this information.
+ *  Used by set_pwm_frequency, set_pwm_duty
  */
-const Timer get_pwm_timer(const pin_t pin) {
-
+Timer get_pwm_timer(const pin_t pin) {
   uint8_t q = 0;
-
   switch (digitalPinToTimer(pin)) {
+    // Protect reserved timers (TIMER0 & TIMER1)
     #ifdef TCCR0A
-      IF_DISABLED(AVR_AT90USB1286_FAMILY, case TIMER0A:)
+      #if !AVR_AT90USB1286_FAMILY
+        case TIMER0A:
+      #endif
+      case TIMER0B:
     #endif
     #ifdef TCCR1A
       case TIMER1A: case TIMER1B:
     #endif
-
-    break;    // Protect reserved timers (TIMER0 & TIMER1)
-
-    #ifdef TCCR0A
-      case TIMER0B:   // Protected timer, but allow setting the duty cycle on OCR0B for pin D4 only
-        return Timer({ { &TCCR0A, nullptr, nullptr }, { (uint16_t*)&OCR0A, (uint16_t*)&OCR0B, nullptr }, nullptr, 0, 1, true, true });
+                                        break;
+    #if defined(TCCR2) || defined(TCCR2A)
+      #ifdef TCCR2
+        case TIMER2: {
+          Timer timer = {
+            /*TCCRnQ*/  { &TCCR2, nullptr, nullptr },
+            /*OCRnQ*/   { (uint16_t*)&OCR2, nullptr, nullptr },
+            /*ICRn*/      nullptr,
+            /*n, q*/      2, 0
+          };
+        }
+      #elif defined(TCCR2A)
+        #if ENABLED(USE_OCR2A_AS_TOP)
+          case TIMER2A:   break; // protect TIMER2A
+          case TIMER2B: {
+            Timer timer = {
+              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr },
+              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
+              /*ICRn*/      nullptr,
+              /*n, q*/      2, 1
+            };
+            return timer;
+          }
+        #else
+          case TIMER2B:   ++q;
+          case TIMER2A: {
+            Timer timer = {
+              /*TCCRnQ*/  { &TCCR2A,  &TCCR2B,  nullptr },
+              /*OCRnQ*/   { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr },
+              /*ICRn*/      nullptr,
+                            2, q
+            };
+            return timer;
+          }
+        #endif
+      #endif
     #endif
-
-    #if HAS_TCCR2
-      case TIMER2:
-        return Timer({ { &TCCR2, nullptr, nullptr }, { (uint16_t*)&OCR2, nullptr, nullptr }, nullptr, 2, 0, true, false });
-    #elif ENABLED(USE_OCR2A_AS_TOP)
-      case TIMER2A: break; // Protect TIMER2A since its OCR is used by TIMER2B
-      case TIMER2B:
-        return Timer({ { &TCCR2A, &TCCR2B, nullptr }, { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr }, nullptr, 2, 1, true, false });
-    #elif defined(TCCR2A)
-      case TIMER2B: ++q; case TIMER2A:
-        return Timer({ { &TCCR2A, &TCCR2B, nullptr }, { (uint16_t*)&OCR2A, (uint16_t*)&OCR2B, nullptr }, nullptr, 2, q, true, false });
-    #endif
-
     #ifdef OCR3C
-      case TIMER3C: ++q; case TIMER3B: ++q; case TIMER3A:
-        return Timer({ { &TCCR3A, &TCCR3B, &TCCR3C }, { &OCR3A, &OCR3B, &OCR3C  }, &ICR3, 3, q, true, false });
+      case TIMER3C:   ++q;
+      case TIMER3B:   ++q;
+      case TIMER3A: {
+        Timer timer = {
+          /*TCCRnQ*/  { &TCCR3A,  &TCCR3B,  &TCCR3C },
+          /*OCRnQ*/   { &OCR3A,   &OCR3B,   &OCR3C },
+          /*ICRn*/      &ICR3,
+          /*n, q*/      3, q
+        };
+        return timer;
+      }
     #elif defined(OCR3B)
-      case TIMER3B: ++q; case TIMER3A:
-        return Timer({ { &TCCR3A, &TCCR3B, nullptr }, { &OCR3A, &OCR3B, nullptr }, &ICR3, 3, q, true, false });
+      case TIMER3B:   ++q;
+      case TIMER3A: {
+        Timer timer = {
+          /*TCCRnQ*/  { &TCCR3A,  &TCCR3B,  nullptr },
+          /*OCRnQ*/   { &OCR3A,   &OCR3B,  nullptr },
+          /*ICRn*/      &ICR3,
+          /*n, q*/      3, q
+        };
+        return timer;
+      }
     #endif
-
     #ifdef TCCR4A
-      case TIMER4C: ++q; case TIMER4B: ++q; case TIMER4A:
-        return Timer({ { &TCCR4A, &TCCR4B, &TCCR4C }, { &OCR4A, &OCR4B, &OCR4C }, &ICR4, 4, q, true, false });
+      case TIMER4C:   ++q;
+      case TIMER4B:   ++q;
+      case TIMER4A: {
+        Timer timer = {
+          /*TCCRnQ*/  { &TCCR4A,  &TCCR4B,  &TCCR4C },
+          /*OCRnQ*/   { &OCR4A,   &OCR4B,   &OCR4C },
+          /*ICRn*/      &ICR4,
+          /*n, q*/      4, q
+        };
+        return timer;
+      }
     #endif
-
     #ifdef TCCR5A
-      case TIMER5C: ++q; case TIMER5B: ++q; case TIMER5A:
-        return Timer({ { &TCCR5A, &TCCR5B, &TCCR5C }, { &OCR5A, &OCR5B, &OCR5C }, &ICR5, 5, q, true, false });
+      case TIMER5C:   ++q;
+      case TIMER5B:   ++q;
+      case TIMER5A: {
+        Timer timer = {
+          /*TCCRnQ*/  { &TCCR5A,  &TCCR5B,  &TCCR5C },
+          /*OCRnQ*/   { &OCR5A,   &OCR5B,   &OCR5C },
+          /*ICRn*/      &ICR5,
+          /*n, q*/      5, q
+        };
+        return timer;
+      }
     #endif
   }
-
-  return Timer();
+  Timer timer = {
+      /*TCCRnQ*/  { nullptr, nullptr, nullptr },
+      /*OCRnQ*/   { nullptr, nullptr, nullptr },
+      /*ICRn*/      nullptr,
+                    0, 0
+  };
+  return timer;
 }
 
-void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
-  const Timer timer = get_pwm_timer(pin);
-  if (timer.isProtected || !timer.isPWM) return; // Don't proceed if protected timer or not recognized
+void set_pwm_frequency(const pin_t pin, int f_desired) {
+  Timer timer = get_pwm_timer(pin);
+  if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
+  uint16_t size;
+  if (timer.n == 2) size = 255; else size = 65535;
 
-  const bool is_timer2 = timer.n == 2;
-  const uint16_t maxtop = is_timer2 ? 0xFF : 0xFFFF;
-
-  uint16_t res = 0xFF;        // resolution (TOP value)
-  uint8_t j = CS_NONE;        // prescaler index
-  uint8_t wgm = WGM_PWM_PC_8; // waveform generation mode
+  uint16_t res = 255;   // resolution (TOP value)
+  uint8_t j = 0;        // prescaler index
+  uint8_t wgm = 1;      // waveform generation mode
 
   // Calculating the prescaler and resolution to use to achieve closest frequency
   if (f_desired != 0) {
-    constexpr uint16_t prescaler[] = { 1, 8, (32), 64, (128), 256, 1024 };  // (*) are Timer 2 only
-    uint16_t f = (F_CPU) / (2 * 1024 * maxtop) + 1;           // Start with the lowest non-zero frequency achievable (1 or 31)
+    int f = (F_CPU) / (2 * 1024 * size) + 1; // Initialize frequency as lowest (non-zero) achievable
+    uint16_t prescaler[] = { 0, 1, 8, /*TIMER2 ONLY*/32, 64, /*TIMER2 ONLY*/128, 256, 1024 };
 
-    LOOP_L_N(i, COUNT(prescaler)) {                           // Loop through all prescaler values
-      const uint16_t p = prescaler[i];
-      uint16_t res_fast_temp, res_pc_temp;
-      if (is_timer2) {
-        #if ENABLED(USE_OCR2A_AS_TOP)                         // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
-          const uint16_t rft = (F_CPU) / (p * f_desired);
-          res_fast_temp = rft - 1;
-          res_pc_temp = rft / 2;
-        #else
-          res_fast_temp = res_pc_temp = maxtop;
+    // loop over prescaler values
+    LOOP_S_L_N(i, 1, 8) {
+      uint16_t res_temp_fast = 255, res_temp_phase_correct = 255;
+      if (timer.n == 2) {
+        // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
+        #if ENABLED(USE_OCR2A_AS_TOP)
+          const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
+          res_temp_fast = rtf - 1;
+          res_temp_phase_correct = rtf / 2;
         #endif
       }
       else {
-        if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
-        const uint16_t rft = (F_CPU) / (p * f_desired);
-        res_fast_temp = rft - 1;
-        res_pc_temp = rft / 2;
+        // Skip TIMER2 specific prescalers when not TIMER2
+        if (i == 3 || i == 5) continue;
+        const uint16_t rtf = (F_CPU) / (prescaler[i] * f_desired);
+        res_temp_fast = rtf - 1;
+        res_temp_phase_correct = rtf / 2;
       }
 
-      LIMIT(res_fast_temp, 1U, maxtop);
-      LIMIT(res_pc_temp, 1U, maxtop);
-
+      LIMIT(res_temp_fast, 1u, size);
+      LIMIT(res_temp_phase_correct, 1u, size);
       // Calculate frequencies of test prescaler and resolution values
-      const uint32_t f_diff      = _MAX(f, f_desired) - _MIN(f, f_desired),
-                     f_fast_temp = (F_CPU) / (p * (1 + res_fast_temp)),
-                     f_fast_diff = _MAX(f_fast_temp, f_desired) - _MIN(f_fast_temp, f_desired),
-                     f_pc_temp   = (F_CPU) / (2 * p * res_pc_temp),
-                     f_pc_diff   = _MAX(f_pc_temp, f_desired) - _MIN(f_pc_temp, f_desired);
+      const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
+                f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
+                f_diff = ABS(f - f_desired),
+                f_fast_diff = ABS(f_temp_fast - f_desired),
+                f_phase_diff = ABS(f_temp_phase_correct - f_desired);
 
-      if (f_fast_diff < f_diff && f_fast_diff <= f_pc_diff) { // FAST values are closest to desired f
-        // Set the Wave Generation Mode to FAST PWM
-        wgm = is_timer2 ? uint8_t(TERN(USE_OCR2A_AS_TOP, WGM2_FAST_PWM_OCR2A, WGM2_FAST_PWM)) : uint8_t(WGM_FAST_PWM_ICRn);
+      // If FAST values are closest to desired f
+      if (f_fast_diff < f_diff && f_fast_diff <= f_phase_diff) {
         // Remember this combination
-        f = f_fast_temp; res = res_fast_temp; j = i + 1;
+        f = f_temp_fast;
+        res = res_temp_fast;
+        j = i;
+        // Set the Wave Generation Mode to FAST PWM
+        if (timer.n == 2) {
+          wgm = (
+            #if ENABLED(USE_OCR2A_AS_TOP)
+              WGM2_FAST_PWM_OCR2A
+            #else
+              WGM2_FAST_PWM
+            #endif
+          );
+        }
+        else wgm = WGM_FAST_PWM_ICRn;
       }
-      else if (f_pc_diff < f_diff) {                          // PHASE CORRECT values are closes to desired f
+      // If PHASE CORRECT values are closes to desired f
+      else if (f_phase_diff < f_diff) {
+        f = f_temp_phase_correct;
+        res = res_temp_phase_correct;
+        j = i;
         // Set the Wave Generation Mode to PWM PHASE CORRECT
-        wgm = is_timer2 ? uint8_t(TERN(USE_OCR2A_AS_TOP, WGM2_PWM_PC_OCR2A, WGM2_PWM_PC)) : uint8_t(WGM_PWM_PC_ICRn);
-        f = f_pc_temp; res = res_pc_temp; j = i + 1;
+        if (timer.n == 2) {
+          wgm = (
+            #if ENABLED(USE_OCR2A_AS_TOP)
+              WGM2_PWM_PC_OCR2A
+            #else
+              WGM2_PWM_PC
+            #endif
+          );
+        }
+        else wgm = WGM_PWM_PC_ICRn;
       }
     }
   }
+  _SET_WGMnQ(timer.TCCRnQ, wgm);
+  _SET_CSn(timer.TCCRnQ, j);
 
-  _SET_WGMnQ(timer, wgm);
-  _SET_CSn(timer, j);
-
-  if (is_timer2) {
-    TERN_(USE_OCR2A_AS_TOP, _SET_OCRnQ(timer, 0, res)); // Set OCR2A value (TOP) = res
+  if (timer.n == 2) {
+    #if ENABLED(USE_OCR2A_AS_TOP)
+      _SET_OCRnQ(timer.OCRnQ, 0, res);  // Set OCR2A value (TOP) = res
+    #endif
   }
   else
-    _SET_ICRn(timer, res);                              // Set ICRn value (TOP) = res
+    _SET_ICRn(timer.ICRn, res);         // Set ICRn value (TOP) = res
 }
 
-void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
+void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
   // If v is 0 or v_size (max), digitalWrite to LOW or HIGH.
-  // Note that digitalWrite also disables PWM output for us (sets COM bit to 0)
+  // Note that digitalWrite also disables pwm output for us (sets COM bit to 0)
   if (v == 0)
     digitalWrite(pin, invert);
   else if (v == v_size)
     digitalWrite(pin, !invert);
   else {
-    const Timer timer = get_pwm_timer(pin);
-    if (timer.isPWM) {
-      if (timer.n == 0) {
-        _SET_COMnQ(timer, timer.q, COM_CLEAR_SET);  // Only allow a TIMER0B select...
-        _SET_OCRnQ(timer, timer.q, v);              // ...and OCR0B duty update. For output pin D4 no frequency changes are permitted.
-      }
-      else if (!timer.isProtected) {
-        const uint16_t top = timer.n == 2 ? TERN(USE_OCR2A_AS_TOP, *timer.OCRnQ[0], 255) : *timer.ICRn;
-        _SET_COMnQ(timer, SUM_TERN(HAS_TCCR2, timer.q, timer.q == 2), COM_CLEAR_SET + invert);   // COM20 is on bit 4 of TCCR2, so +1 for q==2
-        _SET_OCRnQ(timer, timer.q, uint16_t(uint32_t(v) * top / v_size)); // Scale 8/16-bit v to top value
-      }
+    Timer timer = get_pwm_timer(pin);
+    if (timer.n == 0) return; // Don't proceed if protected timer or not recognised
+    // Set compare output mode to CLEAR -> SET or SET -> CLEAR (if inverted)
+    _SET_COMnQ(timer.TCCRnQ, (timer.q
+        #ifdef TCCR2
+          + (timer.q == 2) // COM20 is on bit 4 of TCCR2, thus requires q + 1 in the macro
+        #endif
+      ), COM_CLEAR_SET + invert
+    );
+
+    uint16_t top;
+    if (timer.n == 2) { // if TIMER2
+      top = (
+        #if ENABLED(USE_OCR2A_AS_TOP)
+          *timer.OCRnQ[0] // top = OCR2A
+        #else
+          255 // top = 0xFF (max)
+        #endif
+      );
     }
     else
-      digitalWrite(pin, v < v_size / 2 ? LOW : HIGH);
+      top = *timer.ICRn; // top = ICRn
+
+    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
   }
 }
 
-void MarlinHAL::init_pwm_timers() {
-  // Init some timer frequencies to a default 1KHz
-  const pin_t pwm_pin[] = {
-    #ifdef __AVR_ATmega2560__
-      10, 5, 6, 46
-    #elif defined(__AVR_ATmega1280__)
-      12, 31
-    #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega1284__)
-      15, 6
-    #elif defined(__AVR_AT90USB1286__) || defined(__AVR_mega64) || defined(__AVR_mega128)
-      16, 24
-    #endif
-  };
-
-  LOOP_L_N(i, COUNT(pwm_pin))
-    set_pwm_frequency(pwm_pin[i], 1000);
-}
-
+#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
 #endif // __AVR__

Marlin/src/HAL/AVR/fastio.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -234,55 +234,5 @@ uint8_t extDigitalRead(const int8_t pin) {
   }
 }
 
-#if 0
-/**
- * Set Timer 5 PWM frequency in Hz, from 3.8Hz up to ~16MHz
- * with a minimum resolution of 100 steps.
- *
- * DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
- */
-uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
-  float count = 0;
-  if (hz > 0 && (dca || dcb || dcc)) {
-    count = float(F_CPU) / hz;            // 1x prescaler, TOP for 16MHz base freq.
-    uint16_t prescaler;                   // Range of 30.5Hz (65535) 64.5kHz (>31)
-
-         if (count >= 255. * 256.) { prescaler = 1024; SET_CS(5, PRESCALER_1024); }
-    else if (count >= 255. * 64.)  { prescaler = 256;  SET_CS(5,  PRESCALER_256); }
-    else if (count >= 255. * 8.)   { prescaler = 64;   SET_CS(5,   PRESCALER_64); }
-    else if (count >= 255.)        { prescaler = 8;    SET_CS(5,    PRESCALER_8); }
-    else                           { prescaler = 1;    SET_CS(5,    PRESCALER_1); }
-
-    count /= float(prescaler);
-    const float pwm_top = round(count);   // Get the rounded count
-
-    ICR5 = (uint16_t)pwm_top - 1;         // Subtract 1 for TOP
-    OCR5A = pwm_top * ABS(dca);           // Update and scale DCs
-    OCR5B = pwm_top * ABS(dcb);
-    OCR5C = pwm_top * ABS(dcc);
-    _SET_COM(5, A, dca ? (dca < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL); // Set compare modes
-    _SET_COM(5, B, dcb ? (dcb < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-    _SET_COM(5, C, dcc ? (dcc < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
-
-    SET_WGM(5, FAST_PWM_ICRn);            // Fast PWM with ICR5 as TOP
-
-    //SERIAL_ECHOLNPGM("Timer 5 Settings:");
-    //SERIAL_ECHOLNPGM("  Prescaler=", prescaler);
-    //SERIAL_ECHOLNPGM("        TOP=", ICR5);
-    //SERIAL_ECHOLNPGM("      OCR5A=", OCR5A);
-    //SERIAL_ECHOLNPGM("      OCR5B=", OCR5B);
-    //SERIAL_ECHOLNPGM("      OCR5C=", OCR5C);
-  }
-  else {
-    // Restore the default for Timer 5
-    SET_WGM(5, PWM_PC_8);                 // PWM 8-bit (Phase Correct)
-    SET_COMS(5, NORMAL, NORMAL, NORMAL);  // Do nothing
-    SET_CS(5, PRESCALER_64);              // 16MHz / 64 = 250kHz
-    OCR5A = OCR5B = OCR5C = 0;
-  }
-  return round(count);
-}
-#endif
-
 #endif // FASTIO_EXT_START
 #endif // __AVR__

Marlin/src/HAL/AVR/fastio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,17 +29,11 @@
 
 #include <avr/io.h>
 
-#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
-  #define AVR_AT90USB1286_FAMILY 1
-#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define AVR_ATmega1284_FAMILY 1
-#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define AVR_ATmega2560_FAMILY 1
-#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_ATmega2561_FAMILY 1
-#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_ATmega328_FAMILY 1
-#endif
+#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
+#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
+#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
+#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
+#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
 
 /**
  * Include Ports and Functions
@@ -63,7 +57,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
@@ -104,9 +98,9 @@
 
 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
-#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-#define SET_PWM               SET_OUTPUT
+
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
@@ -118,7 +112,7 @@
  */
 
 // Waveform Generation Modes
-enum WaveGenMode : uint8_t {
+enum WaveGenMode : char {
   WGM_NORMAL,          //  0
   WGM_PWM_PC_8,        //  1
   WGM_PWM_PC_9,        //  2
@@ -138,19 +132,19 @@ enum WaveGenMode : uint8_t {
 };
 
 // Wavefore Generation Modes (Timer 2 only)
-enum WaveGenMode2 : uint8_t {
-  WGM2_NORMAL,         // 0
-  WGM2_PWM_PC,         // 1
-  WGM2_CTC_OCR2A,      // 2
-  WGM2_FAST_PWM,       // 3
-  WGM2_reserved_1,     // 4
-  WGM2_PWM_PC_OCR2A,   // 5
-  WGM2_reserved_2,     // 6
-  WGM2_FAST_PWM_OCR2A, // 7
+enum WaveGenMode2 : char {
+  WGM2_NORMAL,          // 0
+  WGM2_PWM_PC,          // 1
+  WGM2_CTC_OCR2A,       // 2
+  WGM2_FAST_PWM,        // 3
+  WGM2_reserved_1,      // 4
+  WGM2_PWM_PC_OCR2A,    // 5
+  WGM2_reserved_2,      // 6
+  WGM2_FAST_PWM_OCR2A,  // 7
 };
 
 // Compare Modes
-enum CompareMode : uint8_t {
+enum CompareMode : char {
   COM_NORMAL,          //  0
   COM_TOGGLE,          //  1  Non-PWM: OCnx ... Both PWM (WGM 9,11,14,15): OCnA only ... else NORMAL
   COM_CLEAR_SET,       //  2  Non-PWM: OCnx ... Fast PWM: OCnx/Bottom ... PF-FC: OCnx Up/Down
@@ -158,7 +152,7 @@ enum CompareMode : uint8_t {
 };
 
 // Clock Sources
-enum ClockSource : uint8_t {
+enum ClockSource : char {
   CS_NONE,             //  0
   CS_PRESCALER_1,      //  1
   CS_PRESCALER_8,      //  2
@@ -170,7 +164,7 @@ enum ClockSource : uint8_t {
 };
 
 // Clock Sources (Timer 2 only)
-enum ClockSource2 : uint8_t {
+enum ClockSource2 : char {
   CS2_NONE,            //  0
   CS2_PRESCALER_1,     //  1
   CS2_PRESCALER_8,     //  2
@@ -203,33 +197,40 @@ enum ClockSource2 : uint8_t {
     TCCR##T##B = (TCCR##T##B & ~(0x3 << WGM##T##2)) | (((int(V) >> 2) & 0x3) << WGM##T##2); \
   }while(0)
 #define SET_WGM(T,V) _SET_WGM(T,WGM_##V)
+// Runtime (see set_pwm_frequency):
+#define _SET_WGMnQ(TCCRnQ, V) do{ \
+    *(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << 0)) | (( int(V)       & 0x3) << 0); \
+    *(TCCRnQ)[1] = (*(TCCRnQ)[1] & ~(0x3 << 3)) | (((int(V) >> 2) & 0x3) << 3); \
+  }while(0)
 
 // Set Clock Select bits
 // Ex: SET_CS3(PRESCALER_64);
-#ifdef TCCR2
-  #define HAS_TCCR2 1
-#endif
 #define _SET_CS(T,V) (TCCR##T##B = (TCCR##T##B & ~(0x7 << CS##T##0)) | ((int(V) & 0x7) << CS##T##0))
 #define _SET_CS0(V) _SET_CS(0,V)
 #define _SET_CS1(V) _SET_CS(1,V)
+#ifdef TCCR2
+  #define _SET_CS2(V) (TCCR2 = (TCCR2 & ~(0x7 << CS20)) | (int(V) << CS20))
+#else
+  #define _SET_CS2(V) _SET_CS(2,V)
+#endif
 #define _SET_CS3(V) _SET_CS(3,V)
 #define _SET_CS4(V) _SET_CS(4,V)
 #define _SET_CS5(V) _SET_CS(5,V)
 #define SET_CS0(V) _SET_CS0(CS_##V)
 #define SET_CS1(V) _SET_CS1(CS_##V)
-
-#if HAS_TCCR2
-  #define _SET_CS2(V) (TCCR2 = (TCCR2 & ~(0x7 << CS20)) | (int(V) << CS20))
+#ifdef TCCR2
   #define SET_CS2(V) _SET_CS2(CS2_##V)
 #else
-  #define _SET_CS2(V) _SET_CS(2,V)
   #define SET_CS2(V) _SET_CS2(CS_##V)
 #endif
-
 #define SET_CS3(V) _SET_CS3(CS_##V)
 #define SET_CS4(V) _SET_CS4(CS_##V)
 #define SET_CS5(V) _SET_CS5(CS_##V)
 #define SET_CS(T,V) SET_CS##T(V)
+// Runtime (see set_pwm_frequency)
+#define _SET_CSn(TCCRnQ, V) do{ \
+    (*(TCCRnQ)[1] = (*(TCCRnQ[1]) & ~(0x7 << 0)) | ((int(V) & 0x7) << 0)); \
+  }while(0)
 
 // Set Compare Mode bits
 // Ex: SET_COMS(4,CLEAR_SET,CLEAR_SET,CLEAR_SET);
@@ -239,6 +240,22 @@ enum ClockSource2 : uint8_t {
 #define SET_COMB(T,V) SET_COM(T,B,V)
 #define SET_COMC(T,V) SET_COM(T,C,V)
 #define SET_COMS(T,V1,V2,V3) do{ SET_COMA(T,V1); SET_COMB(T,V2); SET_COMC(T,V3); }while(0)
+// Runtime (see set_pwm_duty)
+#define _SET_COMnQ(TCCRnQ, Q, V) do{ \
+    (*(TCCRnQ)[0] = (*(TCCRnQ)[0] & ~(0x3 << (6-2*(Q)))) | (int(V) << (6-2*(Q)))); \
+  }while(0)
+
+// Set OCRnQ register
+// Runtime (see set_pwm_duty):
+#define _SET_OCRnQ(OCRnQ, Q, V) do{ \
+    (*(OCRnQ)[(Q)] = (0x0000) | (int(V) & 0xFFFF)); \
+  }while(0)
+
+// Set ICRn register (one per timer)
+// Runtime (see set_pwm_frequency)
+#define _SET_ICRn(ICRn, V) do{ \
+    (*(ICRn) = (0x0000) | (int(V) & 0xFFFF)); \
+  }while(0)
 
 // Set Noise Canceler bit
 // Ex: SET_ICNC(2,1)
@@ -261,8 +278,8 @@ enum ClockSource2 : uint8_t {
  * PWM availability macros
  */
 
-// Determine which hardware PWMs are already in use
-#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
+// Determine which harware PWMs are already in use
+#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
 #if PIN_EXISTS(CONTROLLER_FAN)
   #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
 #else

Marlin/src/HAL/AVR/fastio/fastio_1280.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_1281.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_168.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_644.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/Conditionals_LCD.h

@@ -16,11 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/AVR."
-#endif

Marlin/src/HAL/AVR/inc/Conditionals_adv.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/Conditionals_post.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,52 +26,40 @@
  */
 
 /**
- * Checks for FAST PWM
+ * Digipot requirement
  */
-#if ALL(FAST_PWM_FAN, USE_OCR2A_AS_TOP, HAS_TCCR2)
-  #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2."
+ #if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
 #endif
 
 /**
- * Checks for SOFT PWM
+ * Checks for FAST PWM
  */
-#if HAS_FAN0 && FAN_PIN == 9 && DISABLED(FAN_SOFT_PWM) && ENABLED(SPEAKER)
-  #error "FAN_PIN 9 Hardware PWM uses Timer 2 which conflicts with Arduino AVR Tone Timer (for SPEAKER)."
-  #error "Disable SPEAKER or enable FAN_SOFT_PWM."
+#if ENABLED(FAST_PWM_FAN) && (ENABLED(USE_OCR2A_AS_TOP) && defined(TCCR2))
+  #error "USE_OCR2A_AS_TOP does not apply to devices with a single output TIMER2"
 #endif
 
 /**
  * Sanity checks for Spindle / Laser PWM
  */
-#if ENABLED(SPINDLE_LASER_USE_PWM)
-  #include "../ServoTimers.h"   // Needed to check timer availability (_useTimer3)
+#if ENABLED(SPINDLE_LASER_PWM)
   #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-  #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+  #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
   #endif
-#elif SPINDLE_LASER_FREQUENCY
-  #error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_USE_PWM."
 #endif
 
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
+#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
-
-/**
- * Postmortem debugging
- */
-#if ENABLED(POSTMORTEM_DEBUGGING)
-  #error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
-#endif
-
-#if USING_PULLDOWNS
-  #error "PULLDOWN pin mode is not available on AVR boards."
-#endif

Marlin/src/HAL/AVR/math.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -35,7 +35,7 @@
 // C B A is longIn1
 // D C B A is longIn2
 //
-FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
+static FORCE_INLINE uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
   uint8_t tmp1;
   uint8_t tmp2;
   uint16_t intRes;
@@ -89,7 +89,7 @@ FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2
 // uses:
 // r26 to store 0
 // r27 to store the byte 1 of the 24 bit result
-FORCE_INLINE static uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
+static FORCE_INLINE uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
   uint8_t tmp;
   uint16_t intRes;
   __asm__ __volatile__ (

Marlin/src/HAL/AVR/persistent_store_eeprom.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
@@ -25,28 +25,19 @@
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with implementations supplied by the framework.
- */
+#include "../shared/persistent_store_api.h"
 
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
-      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
       if (eeprom_read_byte(p) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -55,11 +46,11 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;
@@ -70,5 +61,7 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
   return false;  // always assume success for AVR's
 }
 
+size_t PersistentStore::capacity() { return E2END + 1; }
+
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__

Marlin/src/HAL/AVR/pinsDebug.h

@@ -2,9 +2,6 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,9 +26,7 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
-  #define AVR_ATmega2560_FAMILY_PLUS_70 1
-#endif
+#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
 
 #if AVR_AT90USB1286_FAMILY
 
@@ -41,7 +36,7 @@
   // portModeRegister takes a different argument
   #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
   #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
@@ -74,7 +69,7 @@
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin
 
 void PRINT_ARRAY_NAME(uint8_t x) {
-  char *name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
+  char *name_mem_pointer = (char*)pgm_read_ptr(&pin_array[x].name);
   LOOP_L_N(y, MAX_NAME_LENGTH) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
@@ -102,7 +97,7 @@ void PRINT_ARRAY_NAME(uint8_t x) {
       return true;                                              \
     } else return false
 
-#define ABTEST(N) defined(TCCR##N##A) && defined(COM##N##A1)
+
 
 /**
  * Print a pin's PWM status.
@@ -113,7 +108,7 @@ static bool pwm_status(uint8_t pin) {
 
   switch (digitalPinToTimer_DEBUG(pin)) {
 
-    #if ABTEST(0)
+    #if defined(TCCR0A) && defined(COM0A1)
       #ifdef TIMER0A
         #if !AVR_AT90USB1286_FAMILY  // not available in Teensyduino type IDEs
           PWM_CASE(0, A);
@@ -122,20 +117,20 @@ static bool pwm_status(uint8_t pin) {
       PWM_CASE(0, B);
     #endif
 
-    #if ABTEST(1)
+    #if defined(TCCR1A) && defined(COM1A1)
       PWM_CASE(1, A);
       PWM_CASE(1, B);
-      #if defined(COM1C1) && defined(TIMER1C)
-        PWM_CASE(1, C);
-      #endif
+     #if defined(COM1C1) && defined(TIMER1C)
+      PWM_CASE(1, C);
+     #endif
     #endif
 
-    #if ABTEST(2)
+    #if defined(TCCR2A) && defined(COM2A1)
       PWM_CASE(2, A);
       PWM_CASE(2, B);
     #endif
 
-    #if ABTEST(3)
+    #if defined(TCCR3A) && defined(COM3A1)
       PWM_CASE(3, A);
       PWM_CASE(3, B);
       #ifdef COM3C1
@@ -149,7 +144,7 @@ static bool pwm_status(uint8_t pin) {
       PWM_CASE(4, C);
     #endif
 
-    #if ABTEST(5)
+    #if defined(TCCR5A) && defined(COM5A1)
       PWM_CASE(5, A);
       PWM_CASE(5, B);
       PWM_CASE(5, C);
@@ -166,16 +161,16 @@ static bool pwm_status(uint8_t pin) {
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
     { &TCCR0A, &TCCR0B, &TIMSK0 },
     { &TCCR1A, &TCCR1B, &TIMSK1 },
-  #if ABTEST(2)
+  #if defined(TCCR2A) && defined(COM2A1)
     { &TCCR2A, &TCCR2B, &TIMSK2 },
   #endif
-  #if ABTEST(3)
+  #if defined(TCCR3A) && defined(COM3A1)
     { &TCCR3A, &TCCR3B, &TIMSK3 },
   #endif
   #ifdef TCCR4A
     { &TCCR4A, &TCCR4B, &TIMSK4 },
   #endif
-  #if ABTEST(5)
+  #if defined(TCCR5A) && defined(COM5A1)
     { &TCCR5A, &TCCR5B, &TIMSK5 },
   #endif
 };
@@ -195,11 +190,11 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
    { (const uint8_t*)&OCR1A, (const uint8_t*)&OCR1B, 0 },
   #endif
 
-  #if ABTEST(2)
+  #if defined(TCCR2A) && defined(COM2A1)
     { &OCR2A, &OCR2B, 0 },
   #endif
 
-  #if ABTEST(3)
+  #if defined(TCCR3A) && defined(COM3A1)
     #ifdef COM3C1
       { (const uint8_t*)&OCR3A, (const uint8_t*)&OCR3B, (const uint8_t*)&OCR3C },
     #else
@@ -211,7 +206,7 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
     { (const uint8_t*)&OCR4A, (const uint8_t*)&OCR4B, (const uint8_t*)&OCR4C },
   #endif
 
-  #if ABTEST(5)
+  #if defined(TCCR5A) && defined(COM5A1)
     { (const uint8_t*)&OCR5A, (const uint8_t*)&OCR5B, (const uint8_t*)&OCR5C },
   #endif
 };
@@ -238,9 +233,9 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
 
 inline void com_print(const uint8_t N, const uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
-  SERIAL_ECHOPGM("    COM", AS_DIGIT(N));
-  SERIAL_CHAR(Z);
-  SERIAL_ECHOPGM(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
+  SERIAL_ECHOPGM("    COM");
+  SERIAL_CHAR('0' + N, Z);
+  SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
 }
 
 void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N - WGM bit layout
@@ -250,8 +245,8 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
   if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
 
-  SERIAL_ECHOPGM("    TIMER", AS_DIGIT(T));
-  SERIAL_CHAR(L);
+  SERIAL_ECHOPGM("    TIMER");
+  SERIAL_CHAR(T + '0', L);
   SERIAL_ECHO_SP(3);
 
   if (N == 3) {
@@ -262,14 +257,22 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
     const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
     PWM_PRINT(*OCRVAL16);
   }
-  SERIAL_ECHOPGM("    WGM: ", WGM);
+  SERIAL_ECHOPAIR("    WGM: ", WGM);
   com_print(T,L);
-  SERIAL_ECHOPGM("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
-  SERIAL_ECHOPGM("    TCCR", AS_DIGIT(T), "A: ", *TCCRA);
-  SERIAL_ECHOPGM("    TCCR", AS_DIGIT(T), "B: ", *TCCRB);
+  SERIAL_ECHOPAIR("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
+
+  SERIAL_ECHOPGM("    TCCR");
+  SERIAL_CHAR(T + '0');
+  SERIAL_ECHOPAIR("A: ", *TCCRA);
+
+  SERIAL_ECHOPGM("    TCCR");
+  SERIAL_CHAR(T + '0');
+  SERIAL_ECHOPAIR("B: ", *TCCRB);
 
   const uint8_t *TMSK = (uint8_t*)TIMSK(T);
-  SERIAL_ECHOPGM("    TIMSK", AS_DIGIT(T), ": ", *TMSK);
+  SERIAL_ECHOPGM("    TIMSK");
+  SERIAL_CHAR(T + '0');
+  SERIAL_ECHOPAIR(": ", *TMSK);
 
   const uint8_t OCIE = L - 'A' + 1;
   if (N == 3) { if (WGM == 0 || WGM == 2 || WGM ==  4 || WGM ==  6) err_is_counter(); }
@@ -281,7 +284,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
 static void pwm_details(uint8_t pin) {
   switch (digitalPinToTimer_DEBUG(pin)) {
 
-    #if ABTEST(0)
+    #if defined(TCCR0A) && defined(COM0A1)
       #ifdef TIMER0A
         #if !AVR_AT90USB1286_FAMILY  // not available in Teensyduino type IDEs
           case TIMER0A: timer_prefix(0, 'A', 3); break;
@@ -290,7 +293,7 @@ static void pwm_details(uint8_t pin) {
       case TIMER0B: timer_prefix(0, 'B', 3); break;
     #endif
 
-    #if ABTEST(1)
+    #if defined(TCCR1A) && defined(COM1A1)
       case TIMER1A: timer_prefix(1, 'A', 4); break;
       case TIMER1B: timer_prefix(1, 'B', 4); break;
       #if defined(COM1C1) && defined(TIMER1C)
@@ -298,12 +301,12 @@ static void pwm_details(uint8_t pin) {
       #endif
     #endif
 
-    #if ABTEST(2)
+    #if defined(TCCR2A) && defined(COM2A1)
       case TIMER2A: timer_prefix(2, 'A', 3); break;
       case TIMER2B: timer_prefix(2, 'B', 3); break;
     #endif
 
-    #if ABTEST(3)
+    #if defined(TCCR3A) && defined(COM3A1)
       case TIMER3A: timer_prefix(3, 'A', 4); break;
       case TIMER3B: timer_prefix(3, 'B', 4); break;
       #ifdef COM3C1
@@ -317,7 +320,7 @@ static void pwm_details(uint8_t pin) {
       case TIMER4C: timer_prefix(4, 'C', 4); break;
     #endif
 
-    #if ABTEST(5)
+    #if defined(TCCR5A) && defined(COM5A1)
       case TIMER5A: timer_prefix(5, 'A', 4); break;
       case TIMER5B: timer_prefix(5, 'B', 4); break;
       case TIMER5C: timer_prefix(5, 'C', 4); break;
@@ -351,6 +354,7 @@ static void pwm_details(uint8_t pin) {
   #endif
 } // pwm_details
 
+
 #ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
   int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed
     const uint8_t port = digitalPinToPort_DEBUG(pin);
@@ -395,6 +399,3 @@ static void pwm_details(uint8_t pin) {
 #endif
 
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-
-#undef ABTEST

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -2,9 +2,6 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -2,9 +2,6 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,12 +22,15 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
-  #undef NUM_DIGITAL_PINS
+#undef NUM_DIGITAL_PINS
+#if MB(BQ_ZUM_MEGA_3D)
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
-  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
+#elif MB(MINIRAMBO)
+  #define NUM_DIGITAL_PINS            85
+#elif MB(SCOOVO_X9H)
+  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/AVR/spi_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -51,15 +51,15 @@
   #define AVR_SS_PIN   16
 #endif
 
-#ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  AVR_SCK_PIN
+#ifndef SCK_PIN
+  #define SCK_PIN  AVR_SCK_PIN
 #endif
-#ifndef SD_MISO_PIN
-  #define SD_MISO_PIN AVR_MISO_PIN
+#ifndef MISO_PIN
+  #define MISO_PIN AVR_MISO_PIN
 #endif
-#ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN AVR_MOSI_PIN
+#ifndef MOSI_PIN
+  #define MOSI_PIN AVR_MOSI_PIN
 #endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN   AVR_SS_PIN
+#ifndef SS_PIN
+  #define SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/AVR/timers.h

@@ -1,260 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <stdint.h>
-
-// ------------------------
-// Types
-// ------------------------
-
-typedef uint16_t hal_timer_t;
-#define HAL_TIMER_TYPE_MAX 0xFFFF
-
-// ------------------------
-// Defines
-// ------------------------
-
-#define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
-
-#ifndef MF_TIMER_STEP
-  #define MF_TIMER_STEP         1
-#endif
-#ifndef MF_TIMER_PULSE
-  #define MF_TIMER_PULSE        MF_TIMER_STEP
-#endif
-#ifndef MF_TIMER_TEMP
-  #define MF_TIMER_TEMP         0
-#endif
-
-#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
-
-#define STEPPER_TIMER_RATE      HAL_TIMER_RATE
-#define STEPPER_TIMER_PRESCALE  8
-#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
-
-#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
-#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
-
-#define ENABLE_STEPPER_DRIVER_INTERRUPT()  SBI(TIMSK1, OCIE1A)
-#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
-#define STEPPER_ISR_ENABLED()             TEST(TIMSK1, OCIE1A)
-
-#define ENABLE_TEMPERATURE_INTERRUPT()     SBI(TIMSK0, OCIE0A)
-#define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0A)
-#define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0A)
-
-FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
-  switch (timer_num) {
-    case MF_TIMER_STEP:
-      // waveform generation = 0100 = CTC
-      SET_WGM(1, CTC_OCRnA);
-
-      // output mode = 00 (disconnected)
-      SET_COMA(1, NORMAL);
-
-      // Set the timer pre-scaler
-      // Generally we use a divider of 8, resulting in a 2MHz timer
-      // frequency on a 16MHz MCU. If you are going to change this, be
-      // sure to regenerate speed_lookuptable.h with
-      // create_speed_lookuptable.py
-      SET_CS(1, PRESCALER_8);  //  CS 2 = 1/8 prescaler
-
-      // Init Stepper ISR to 122 Hz for quick starting
-      // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
-      OCR1A = 0x4000;
-      TCNT1 = 0;
-      break;
-
-    case MF_TIMER_TEMP:
-      // Use timer0 for temperature measurement
-      // Interleave temperature interrupt with millies interrupt
-      OCR0A = 128;
-      break;
-  }
-}
-
-#define TIMER_OCR_1             OCR1A
-#define TIMER_COUNTER_1         TCNT1
-
-#define TIMER_OCR_0             OCR0A
-#define TIMER_COUNTER_0         TCNT0
-
-#define _CAT(a,V...) a##V
-#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
-#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
-#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
-
-/**
- * On AVR there is no hardware prioritization and preemption of
- * interrupts, so this emulates it. The UART has first priority
- * (otherwise, characters will be lost due to UART overflow).
- * Then: Stepper, Endstops, Temperature, and -finally- all others.
- */
-#define HAL_timer_isr_prologue(T) NOOP
-#define HAL_timer_isr_epilogue(T) NOOP
-
-#ifndef HAL_STEP_TIMER_ISR
-
-/* 18 cycles maximum latency */
-#define HAL_STEP_TIMER_ISR() \
-extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER1_COMPA_vect() { \
-  __asm__ __volatile__ ( \
-    A("push r16")                      /* 2 Save R16 */ \
-    A("in r16, __SREG__")              /* 1 Get SREG */ \
-    A("push r16")                      /* 2 Save SREG into stack */ \
-    A("lds r16, %[timsk0]")            /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
-    A("push r16")                      /* 2 Save TIMSK0 into the stack */ \
-    A("andi r16,~%[msk0]")             /* 1 Disable the temperature ISR */ \
-    A("sts %[timsk0], r16")            /* 2 And set the new value */ \
-    A("lds r16, %[timsk1]")            /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
-    A("andi r16,~%[msk1]")             /* 1 Disable the stepper ISR */ \
-    A("sts %[timsk1], r16")            /* 2 And set the new value */ \
-    A("push r16")                      /* 2 Save TIMSK1 into stack */ \
-    A("in r16, 0x3B")                  /* 1 Get RAMPZ register */ \
-    A("push r16")                      /* 2 Save RAMPZ into stack */ \
-    A("in r16, 0x3C")                  /* 1 Get EIND register */ \
-    A("push r0")                       /* C runtime can modify all the following registers without restoring them */ \
-    A("push r1")                       \
-    A("push r18")                      \
-    A("push r19")                      \
-    A("push r20")                      \
-    A("push r21")                      \
-    A("push r22")                      \
-    A("push r23")                      \
-    A("push r24")                      \
-    A("push r25")                      \
-    A("push r26")                      \
-    A("push r27")                      \
-    A("push r30")                      \
-    A("push r31")                      \
-    A("clr r1")                        /* C runtime expects this register to be 0 */ \
-    A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
-    A("pop r31")                       \
-    A("pop r30")                       \
-    A("pop r27")                       \
-    A("pop r26")                       \
-    A("pop r25")                       \
-    A("pop r24")                       \
-    A("pop r23")                       \
-    A("pop r22")                       \
-    A("pop r21")                       \
-    A("pop r20")                       \
-    A("pop r19")                       \
-    A("pop r18")                       \
-    A("pop r1")                        \
-    A("pop r0")                        \
-    A("out 0x3C, r16")                 /* 1 Restore EIND register */ \
-    A("pop r16")                       /* 2 Get the original RAMPZ register value */ \
-    A("out 0x3B, r16")                 /* 1 Restore RAMPZ register to its original value */ \
-    A("pop r16")                       /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
-    A("ori r16,%[msk1]")               /* 1 Reenable the stepper ISR */ \
-    A("cli")                           /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
-    A("sts %[timsk1], r16")            /* 2 And restore the old value - This reenables the stepper ISR */ \
-    A("pop r16")                       /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
-    A("sts %[timsk0], r16")            /* 2 And restore the old value - This reenables the temperature ISR */ \
-    A("pop r16")                       /* 2 Get the old SREG value */ \
-    A("out __SREG__, r16")             /* 1 And restore the SREG value */ \
-    A("pop r16")                       /* 2 Restore R16 value */ \
-    A("reti")                          /* 4 Return from interrupt */ \
-    :                                   \
-    : [timsk0] "i" ((uint16_t)&TIMSK0), \
-      [timsk1] "i" ((uint16_t)&TIMSK1), \
-      [msk0] "M" ((uint8_t)(1<<OCIE0A)),\
-      [msk1] "M" ((uint8_t)(1<<OCIE1A)) \
-    : \
-  ); \
-} \
-void TIMER1_COMPA_vect_bottom()
-
-#endif // HAL_STEP_TIMER_ISR
-
-#ifndef HAL_TEMP_TIMER_ISR
-
-/* 14 cycles maximum latency */
-#define HAL_TEMP_TIMER_ISR() \
-extern "C" void TIMER0_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER0_COMPA_vect_bottom()  asm ("TIMER0_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER0_COMPA_vect() { \
-  __asm__ __volatile__ ( \
-    A("push r16")                       /* 2 Save R16 */ \
-    A("in r16, __SREG__")               /* 1 Get SREG */ \
-    A("push r16")                       /* 2 Save SREG into stack */ \
-    A("lds r16, %[timsk0]")             /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
-    A("andi r16,~%[msk0]")              /* 1 Disable the temperature ISR */ \
-    A("sts %[timsk0], r16")             /* 2 And set the new value */ \
-    A("sei")                            /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */    \
-    A("push r16")                       /* 2 Save TIMSK0 into stack */ \
-    A("in r16, 0x3B")                   /* 1 Get RAMPZ register */ \
-    A("push r16")                       /* 2 Save RAMPZ into stack */ \
-    A("in r16, 0x3C")                   /* 1 Get EIND register */ \
-    A("push r0")                        /* C runtime can modify all the following registers without restoring them */ \
-    A("push r1")                        \
-    A("push r18")                       \
-    A("push r19")                       \
-    A("push r20")                       \
-    A("push r21")                       \
-    A("push r22")                       \
-    A("push r23")                       \
-    A("push r24")                       \
-    A("push r25")                       \
-    A("push r26")                       \
-    A("push r27")                       \
-    A("push r30")                       \
-    A("push r31")                       \
-    A("clr r1")                         /* C runtime expects this register to be 0 */ \
-    A("call TIMER0_COMPA_vect_bottom")  /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
-    A("pop r31")                        \
-    A("pop r30")                        \
-    A("pop r27")                        \
-    A("pop r26")                        \
-    A("pop r25")                        \
-    A("pop r24")                        \
-    A("pop r23")                        \
-    A("pop r22")                        \
-    A("pop r21")                        \
-    A("pop r20")                        \
-    A("pop r19")                        \
-    A("pop r18")                        \
-    A("pop r1")                         \
-    A("pop r0")                         \
-    A("out 0x3C, r16")                  /* 1 Restore EIND register */ \
-    A("pop r16")                        /* 2 Get the original RAMPZ register value */ \
-    A("out 0x3B, r16")                  /* 1 Restore RAMPZ register to its original value */ \
-    A("pop r16")                        /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
-    A("ori r16,%[msk0]")                /* 1 Enable temperature ISR */ \
-    A("cli")                            /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
-    A("sts %[timsk0], r16")             /* 2 And restore the old value */ \
-    A("pop r16")                        /* 2 Get the old SREG */ \
-    A("out __SREG__, r16")              /* 1 And restore the SREG value */ \
-    A("pop r16")                        /* 2 Restore R16 */ \
-    A("reti")                           /* 4 Return from interrupt */ \
-    :                                   \
-    : [timsk0] "i"((uint16_t)&TIMSK0),  \
-      [msk0] "M" ((uint8_t)(1<<OCIE0A)) \
-    : \
-  ); \
-} \
-void TIMER0_COMPA_vect_bottom()
-
-#endif // HAL_TEMP_TIMER_ISR

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,15 +57,15 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
 
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
-static uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
-static volatile uint8_t *u8g_outData, *u8g_outClock;
+uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
+volatile uint8_t *u8g_outData, *u8g_outClock;
 
 static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
   u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/AVR/watchdog.cpp

@@ -16,9 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/AVR/watchdog.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/DebugMonitor.cpp

@@ -0,0 +1,343 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../core/macros.h"
+#include "../../core/serial.h"
+
+#include "../shared/backtrace/unwinder.h"
+#include "../shared/backtrace/unwmemaccess.h"
+
+#include <stdarg.h>
+
+// Debug monitor that dumps to the Programming port all status when
+// an exception or WDT timeout happens - And then resets the board
+
+// All the Monitor routines must run with interrupts disabled and
+// under an ISR execution context. That is why we cannot reuse the
+// Serial interrupt routines or any C runtime, as we don't know the
+// state we are when running them
+
+// A SW memory barrier, to ensure GCC does not overoptimize loops
+#define sw_barrier() __asm__ volatile("": : :"memory");
+
+// (re)initialize UART0 as a monitor output to 250000,n,8,1
+static void TXBegin() {
+
+  // Disable UART interrupt in NVIC
+  NVIC_DisableIRQ( UART_IRQn );
+
+  // We NEED memory barriers to ensure Interrupts are actually disabled!
+  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
+  __DSB();
+  __ISB();
+
+  // Disable clock
+  pmc_disable_periph_clk( ID_UART );
+
+  // Configure PMC
+  pmc_enable_periph_clk( ID_UART );
+
+  // Disable PDC channel
+  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
+
+  // Reset and disable receiver and transmitter
+  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
+
+  // Configure mode: 8bit, No parity, 1 bit stop
+  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
+
+  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
+  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
+
+  // Enable receiver and transmitter
+  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
+}
+
+// Send character through UART with no interrupts
+static void TX(char c) {
+  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
+  UART->UART_THR = c;
+}
+
+// Send String through UART
+static void TX(const char* s) {
+  while (*s) TX(*s++);
+}
+
+static void TXDigit(uint32_t d) {
+  if (d < 10) TX((char)(d+'0'));
+  else if (d < 16) TX((char)(d+'A'-10));
+  else TX('?');
+}
+
+// Send Hex number thru UART
+static void TXHex(uint32_t v) {
+  TX("0x");
+  for (uint8_t i = 0; i < 8; i++, v <<= 4)
+    TXDigit((v >> 28) & 0xF);
+}
+
+// Send Decimal number thru UART
+static void TXDec(uint32_t v) {
+  if (!v) {
+    TX('0');
+    return;
+  }
+
+  char nbrs[14];
+  char *p = &nbrs[0];
+  while (v != 0) {
+    *p++ = '0' + (v % 10);
+    v /= 10;
+  }
+  do {
+    p--;
+    TX(*p);
+  } while (p != &nbrs[0]);
+}
+
+// Dump a backtrace entry
+static bool UnwReportOut(void* ctx, const UnwReport* bte) {
+  int* p = (int*)ctx;
+
+  (*p)++;
+  TX('#'); TXDec(*p); TX(" : ");
+  TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
+  TX('+'); TXDec(bte->address - bte->function);
+  TX(" PC:");TXHex(bte->address); TX('\n');
+  return true;
+}
+
+#ifdef UNW_DEBUG
+  void UnwPrintf(const char* format, ...) {
+    char dest[256];
+    va_list argptr;
+    va_start(argptr, format);
+    vsprintf(dest, format, argptr);
+    va_end(argptr);
+    TX(&dest[0]);
+  }
+#endif
+
+/* Table of function pointers for passing to the unwinder */
+static const UnwindCallbacks UnwCallbacks = {
+  UnwReportOut,
+  UnwReadW,
+  UnwReadH,
+  UnwReadB
+  #ifdef UNW_DEBUG
+   , UnwPrintf
+  #endif
+};
+
+/**
+ * HardFaultHandler_C:
+ * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
+ * as the parameter. We can then read the values from the stack and place them
+ * into local variables for ease of reading.
+ * We then read the various Fault Status and Address Registers to help decode
+ * cause of the fault.
+ * The function ends with a BKPT instruction to force control back into the debugger
+ */
+extern "C"
+void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
+
+  static const char* causestr[] = {
+    "NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
+  };
+
+  UnwindFrame btf;
+
+  // Dump report to the Programming port (interrupts are DISABLED)
+  TXBegin();
+  TX("\n\n## Software Fault detected ##\n");
+  TX("Cause: "); TX(causestr[cause]); TX('\n');
+
+  TX("R0   : "); TXHex(((unsigned long)sp[0])); TX('\n');
+  TX("R1   : "); TXHex(((unsigned long)sp[1])); TX('\n');
+  TX("R2   : "); TXHex(((unsigned long)sp[2])); TX('\n');
+  TX("R3   : "); TXHex(((unsigned long)sp[3])); TX('\n');
+  TX("R12  : "); TXHex(((unsigned long)sp[4])); TX('\n');
+  TX("LR   : "); TXHex(((unsigned long)sp[5])); TX('\n');
+  TX("PC   : "); TXHex(((unsigned long)sp[6])); TX('\n');
+  TX("PSR  : "); TXHex(((unsigned long)sp[7])); TX('\n');
+
+  // Configurable Fault Status Register
+  // Consists of MMSR, BFSR and UFSR
+  TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
+
+  // Hard Fault Status Register
+  TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
+
+  // Debug Fault Status Register
+  TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
+
+  // Auxiliary Fault Status Register
+  TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
+
+  // Read the Fault Address Registers. These may not contain valid values.
+  // Check BFARVALID/MMARVALID to see if they are valid values
+  // MemManage Fault Address Register
+  TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
+
+  // Bus Fault Address Register
+  TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
+
+  TX("ExcLR: "); TXHex(lr); TX('\n');
+  TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
+
+  btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
+  btf.fp = btf.sp;
+  btf.lr = ((unsigned long)sp[5]);
+  btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
+
+  // Perform a backtrace
+  TX("\nBacktrace:\n\n");
+  int ctr = 0;
+  UnwindStart(&btf, &UnwCallbacks, &ctr);
+
+  // Disable all NVIC interrupts
+  NVIC->ICER[0] = 0xFFFFFFFF;
+  NVIC->ICER[1] = 0xFFFFFFFF;
+
+  // Relocate VTOR table to default position
+  SCB->VTOR = 0;
+
+  // Disable USB
+  otg_disable();
+
+  // Restart watchdog
+  WDT_Restart(WDT);
+
+  // Reset controller
+  NVIC_SystemReset();
+  for (;;) WDT_Restart(WDT);
+}
+
+__attribute__((naked)) void NMI_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#0")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void HardFault_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#1")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void MemManage_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#2")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void BusFault_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#3")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void UsageFault_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#4")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void DebugMon_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#5")
+    A("b HardFault_HandlerC")
+  );
+}
+
+/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
+__attribute__((naked)) void WDT_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#6")
+    A("b HardFault_HandlerC")
+  );
+}
+
+__attribute__((naked)) void RSTC_Handler() {
+  __asm__ __volatile__ (
+    ".syntax unified" "\n\t"
+    A("tst lr, #4")
+    A("ite eq")
+    A("mrseq r0, msp")
+    A("mrsne r0, psp")
+    A("mov r1,lr")
+    A("mov r2,#7")
+    A("b HardFault_HandlerC")
+  );
+}
+
+#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/EepromEmulation.cpp

@@ -1,10 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,14 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(FLASH_EEPROM_EMULATION)
 
 /* EEPROM emulation over flash with reduced wear
  *
@@ -53,14 +47,22 @@
  * per page. We can't emulate EE endurance with FLASH for all
  * bytes, but we can emulate endurance for a given percent of
  * bytes.
+ *
  */
 
-//#define EE_EMU_DEBUG
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+
+#include "../shared/Marduino.h"
+#include "../shared/persistent_store_api.h"
 
 #define EEPROMSize     4096
 #define PagesPerGroup   128
 #define GroupCount        2
-#define PageSize        256U
+#define PageSize        256u
 
  /* Flash storage */
 typedef struct FLASH_SECTOR {
@@ -132,18 +134,15 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curPage = 0,         // Current FLASH page inside the group
                curGroup = 0xFF;     // Current FLASH group
 
-#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
-#include "../../core/debug_out.h"
+//#define EE_EMU_DEBUG
+#ifdef EE_EMU_DEBUG
+  static void ee_Dump(int page,const void* data) {
 
-static void ee_Dump(const int page, const void *data) {
-
-  #ifdef EE_EMU_DEBUG
-
-    const uint8_t *c = (const uint8_t*) data;
+    const uint8_t* c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
-    DEBUG_ECHO(buffer);
+    SERIAL_ECHO(buffer);
 
     char* p = &buffer[0];
     for (int i = 0; i< PageSize; ++i) {
@@ -153,16 +152,12 @@ static void ee_Dump(const int page, const void *data) {
       if ((i & 0xF) == 0xF) {
         *p++ = '\n';
         *p = 0;
-        DEBUG_ECHO(buffer);
+        SERIAL_ECHO(buffer);
         p = &buffer[0];
       }
     }
-
-  #else
-    UNUSED(page);
-    UNUSED(data);
-  #endif
-}
+  }
+#endif
 
 /* Flash Writing Protection Key */
 #define FWP_KEY    0x5Au
@@ -175,16 +170,17 @@ static void ee_Dump(const int page, const void *data) {
   #define EEFC_ERROR_FLAGS  (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
 #endif
 
+
 /**
  * Writes the contents of the specified page (no previous erase)
  * @param page    (page #)
  * @param data    (pointer to the data buffer)
  */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page, const void *data) {
+static bool ee_PageWrite(uint16_t page,const void* data) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
   // Read the flash contents
   uint32_t pageContents[PageSize>>2];
@@ -199,11 +195,13 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
   for (i = 0; i <PageSize >> 2; i++)
     pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPGM("EEPROM PageWrite   ", page);
-  DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPGM(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageWrite   ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -245,8 +243,10 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ", page);
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #endif
     return false;
   }
 
@@ -270,9 +270,10 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPGM("EEPROM Write failure for page ", page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
+    #endif
     return false;
   }
 
@@ -286,15 +287,15 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
   if (memcmp(getFlashStorage(page),data,PageSize)) {
 
     #ifdef EE_EMU_DEBUG
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPGM("EEPROM Verify Write failure for page ", page);
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
 
-      ee_Dump( page, (uint32_t *)addrflash);
-      ee_Dump(-page, data);
+      ee_Dump( page,(uint32_t *) addrflash);
+      ee_Dump(-page,data);
 
       // Calculate count of changed bits
-      uint32_t *p1 = (uint32_t*)addrflash;
-      uint32_t *p2 = (uint32_t*)data;
+      uint32_t* p1 = (uint32_t*)addrflash;
+      uint32_t* p2 = (uint32_t*)data;
       int count = 0;
       for (i =0; i<PageSize >> 2; i++) {
         if (p1[i] != p2[i]) {
@@ -306,7 +307,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
           }
         }
       }
-      DEBUG_ECHOLNPGM("--> Differing bits: ", count);
+      SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
     #endif
 
     return false;
@@ -323,13 +324,15 @@ __attribute__ ((long_call, section (".ramfunc")))
 static bool ee_PageErase(uint16_t page) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPGM("EEPROM PageErase  ", page);
-  DEBUG_ECHOLNPGM(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPGM(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageErase  ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -370,9 +373,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPGM("EEPROM Unlock failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+    #endif
     return false;
   }
 
@@ -394,9 +398,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPGM("EEPROM Erase failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+    #endif
     return false;
   }
 
@@ -410,17 +415,20 @@ static bool ee_PageErase(uint16_t page) {
   uint32_t * aligned_src = (uint32_t *) addrflash;
   for (i = 0; i < PageSize >> 2; i++) {
     if (*aligned_src++ != 0xFFFFFFFF) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPGM("EEPROM Verify Erase failure for page ",page);
-      ee_Dump(page, (uint32_t *)addrflash);
+
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+
+        ee_Dump( page,(uint32_t *) addrflash);
+      #endif
       return false;
     }
   }
 
   return true;
 }
-
-static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
+static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
 
   uint32_t baddr;
   uint32_t blen;
@@ -470,7 +478,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -503,7 +511,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   return 0xFF;
 }
 
-static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
+static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
   uint32_t baddr,
            blen,
            nextAddr = 0xFFFF,
@@ -550,7 +558,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
   for (int page = curPage - 1; page >= 0; --page) {
 
     // Get a pointer to the flash page
-    uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
+    uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
 
     uint16_t i = 0;
     while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -589,17 +597,17 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
 }
 
 static bool ee_IsPageClean(int page) {
-  uint32_t *pflash = (uint32_t*) getFlashStorage(page);
+  uint32_t* pflash = (uint32_t*) getFlashStorage(page);
   for (uint16_t i = 0; i < (PageSize >> 2); ++i)
     if (*pflash++ != 0xFFFFFFFF) return false;
   return true;
 }
 
-static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {
+static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
-  uint32_t *p = (uint32_t*) &buffer[0];
+  uint32_t* p = (uint32_t*) &buffer[0];
   for (uint16_t j = 0; j < (PageSize >> 2); j++) {
     if (*p++ != 0xFFFFFFFF) {
       isEmpty = false;
@@ -921,9 +929,11 @@ static void ee_Init() {
   // If all groups seem to be used, default to first group
   if (curGroup >= GroupCount) curGroup = 0;
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPGM("EEPROM Current Group: ",curGroup);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+    SERIAL_FLUSH();
+  #endif
 
   // Now, validate that all the other group pages are empty
   for (int grp = 0; grp < GroupCount; grp++) {
@@ -931,9 +941,11 @@ static void ee_Init() {
 
     for (int page = 0; page < PagesPerGroup; page++) {
       if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
-        DEBUG_ECHO_START();
-        DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on group ", grp);
-        DEBUG_FLUSH();
+        #ifdef EE_EMU_DEBUG
+          SERIAL_ECHO_START();
+          SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
+          SERIAL_FLUSH();
+        #endif
         ee_PageErase(grp * PagesPerGroup + page);
       }
     }
@@ -943,68 +955,66 @@ static void ee_Init() {
   // and also validate that all the other ones are clean
   for (curPage = 0; curPage < PagesPerGroup; curPage++) {
     if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
-      ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #ifdef EE_EMU_DEBUG
+        ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #endif
       break;
     }
   }
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPGM("EEPROM Active page: ", curPage);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Active page: ", curPage);
+    SERIAL_FLUSH();
+  #endif
 
   // Make sure the pages following the first clean one are also clean
   for (int page = curPage + 1; page < PagesPerGroup; page++) {
     if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPGM("EEPROM Page ", page, " not clean on active group ", curGroup);
-      DEBUG_FLUSH();
-      ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
+        SERIAL_FLUSH();
+        ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #endif
       ee_PageErase(curGroup * PagesPerGroup + page);
     }
   }
 }
 
-/* PersistentStore -----------------------------------------------------------*/
-
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
-#endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { ee_Init();  return true; }
-bool PersistentStore::access_finish() { ee_Flush(); return true; }
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint16_t written = 0;
-  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t v = *value;
-    if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
-      ee_Write(uint32_t(p), v);
-      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
-      if (ee_Read(uint32_t(p)) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-  return false;
+uint8_t eeprom_read_byte(uint8_t* addr) {
+  ee_Init();
+  return ee_Read((uint32_t)addr);
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    uint8_t c = ee_Read(uint32_t(pos));
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-  return false;
+void eeprom_write_byte(uint8_t* addr, uint8_t value) {
+  ee_Init();
+  ee_Write((uint32_t)addr, value);
+}
+
+void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  const uint8_t* src = (const uint8_t*)__src;
+  while (__n--) {
+    eeprom_write_byte(dst, *src);
+    ++dst;
+    ++src;
+  }
+}
+
+void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  uint8_t* src = (uint8_t*)__src;
+  while (__n--) {
+    *dst = eeprom_read_byte(src);
+    ++dst;
+    ++src;
+  }
+}
+
+void eeprom_flush() {
+  ee_Flush();
 }
 
 #endif // FLASH_EEPROM_EMULATION
-#endif // ARDUINO_ARCH_SAM
+#endif // ARDUINO_ARCH_AVR

Marlin/src/HAL/DUE/HAL.cpp

@@ -14,12 +14,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -34,32 +35,36 @@
 // Public Variables
 // ------------------------
 
-uint16_t MarlinHAL::adc_result;
+uint16_t HAL_adc_result;
 
 // ------------------------
 // Public functions
 // ------------------------
 
-TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
-
-void MarlinHAL::init() {
+// HAL initialization task
+void HAL_init() {
   // Initialize the USB stack
   #if ENABLED(SDSUPPORT)
     OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();
-  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
 }
 
-void MarlinHAL::init_board() {
-  #ifdef BOARD_INIT
-    BOARD_INIT();
-  #endif
+// HAL idle task
+void HAL_idletask() {
+  // Perform USB stack housekeeping
+  usb_task_idle();
 }
 
-void MarlinHAL::idletask() { usb_task_idle(); } // Perform USB stack housekeeping
+// Disable interrupts
+void cli() { noInterrupts(); }
 
-uint8_t MarlinHAL::get_reset_source() {
+// Enable interrupts
+void sei() { interrupts(); }
+
+void HAL_clear_reset_source() { }
+
+uint8_t HAL_get_reset_source() {
   switch ((RSTC->RSTC_SR >> 8) & 0x07) {
     case 0: return RST_POWER_ON;
     case 1: return RST_BACKUP;
@@ -70,7 +75,10 @@ uint8_t MarlinHAL::get_reset_source() {
   }
 }
 
-void MarlinHAL::reboot() { rstc_start_software_reset(RSTC); }
+void _delay_ms(const int delay_ms) {
+  // Todo: port for Due?
+  delay(delay_ms);
+}
 
 extern "C" {
   extern unsigned int _ebss; // end of bss section
@@ -82,18 +90,17 @@ int freeMemory() {
   return (int)&free_memory - (heap_end ?: (int)&_ebss);
 }
 
-// Forward the default serial ports
-#if USING_HW_SERIAL0
-  DefaultSerial1 MSerial0(false, Serial);
-#endif
-#if USING_HW_SERIAL1
-  DefaultSerial2 MSerial1(false, Serial1);
-#endif
-#if USING_HW_SERIAL2
-  DefaultSerial3 MSerial2(false, Serial2);
-#endif
-#if USING_HW_SERIAL3
-  DefaultSerial4 MSerial3(false, Serial3);
-#endif
+// ------------------------
+// ADC
+// ------------------------
+
+void HAL_adc_start_conversion(const uint8_t ch) {
+  HAL_adc_result = analogRead(ch);
+}
+
+uint16_t HAL_adc_get_result() {
+  // nop
+  return HAL_adc_result;
+}
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.h

@@ -16,123 +16,151 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
-#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
+#include "timers.h"
 
 #include <stdint.h>
 
-#include "../../core/serial_hook.h"
-
-// ------------------------
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
-typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
-typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
-extern DefaultSerial1 MSerial0;
-extern DefaultSerial2 MSerial1;
-extern DefaultSerial3 MSerial2;
-extern DefaultSerial4 MSerial3;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
+// Define MYSERIAL0/1 before MarlinSerial includes!
 #if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL1 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
+  #define MYSERIAL0 customizedSerial1
+#elif SERIAL_PORT == 0
+  #define MYSERIAL0 Serial
+#elif SERIAL_PORT == 1
+  #define MYSERIAL0 Serial1
+#elif SERIAL_PORT == 2
+  #define MYSERIAL0 Serial2
+#elif SERIAL_PORT == 3
+  #define MYSERIAL0 Serial3
 #else
-  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL2 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
+  #if SERIAL_PORT_2 == SERIAL_PORT
+    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
+  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL1 customizedSerial2
+  #elif SERIAL_PORT_2 == 0
+    #define MYSERIAL1 Serial
+  #elif SERIAL_PORT_2 == 1
+    #define MYSERIAL1 Serial1
+  #elif SERIAL_PORT_2 == 2
+    #define MYSERIAL1 Serial2
+  #elif SERIAL_PORT_2 == 3
+    #define MYSERIAL1 Serial3
   #else
-    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
+    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
   #endif
+  #define NUM_SERIAL 2
+#else
+  #define NUM_SERIAL 1
 #endif
 
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL3 customizedSerial3
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
+#ifdef DGUS_SERIAL_PORT
+  #if DGUS_SERIAL_PORT == SERIAL_PORT
+    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
+  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
+    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+  #elif DGUS_SERIAL_PORT == -1
+    #define DGUS_SERIAL internalDgusSerial
+  #elif DGUS_SERIAL_PORT == 0
+    #define DGUS_SERIAL Serial
+  #elif DGUS_SERIAL_PORT == 1
+    #define DGUS_SERIAL Serial1
+  #elif DGUS_SERIAL_PORT == 2
+    #define DGUS_SERIAL Serial2
+  #elif DGUS_SERIAL_PORT == 3
+    #define DGUS_SERIAL Serial3
   #else
-    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3."
+    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
   #endif
 #endif
 
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
 
-// ------------------------
-// Types
-// ------------------------
+// On AVR this is in math.h?
+#define square(x) ((x)*(x))
+
+#ifndef strncpy_P
+  #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
+#endif
+
+// Fix bug in pgm_read_ptr
+#undef pgm_read_ptr
+#define pgm_read_ptr(addr) (*((void**)(addr)))
+#undef pgm_read_word
+#define pgm_read_word(addr) (*((uint16_t*)(addr)))
 
 typedef int8_t pin_t;
 
-#define SHARED_SERVOS HAS_SERVOS  // Use shared/servos.cpp
-
-class Servo;
-typedef Servo hal_servo_t;
+#define SHARED_SERVOS HAS_SERVOS
+#define HAL_SERVO_LIB Servo
 
 //
 // Interrupts
 //
-#define sei() noInterrupts()
-#define cli() interrupts()
+#define CRITICAL_SECTION_START()  uint32_t primask = __get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (!primask) __enable_irq()
+#define ISRS_ENABLED() (!__get_PRIMASK())
+#define ENABLE_ISRS()  __enable_irq()
+#define DISABLE_ISRS() __disable_irq()
 
-#define CRITICAL_SECTION_START()  const bool _irqon = hal.isr_state(); hal.isr_off()
-#define CRITICAL_SECTION_END()    if (_irqon) hal.isr_on()
+void cli();                     // Disable interrupts
+void sei();                     // Enable interrupts
+
+void HAL_clear_reset_source();  // clear reset reason
+uint8_t HAL_get_reset_source(); // get reset reason
+
+//
+// EEPROM
+//
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
 
 //
 // ADC
 //
-#define HAL_ADC_VREF         3.3
-#define HAL_ADC_RESOLUTION  10
+extern uint16_t HAL_adc_result;     // result of last ADC conversion
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
 #endif
 
+#define HAL_ANALOG_SELECT(ch)
+
+inline void HAL_adc_init() {}//todo
+
+#define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
+#define HAL_ADC_RESOLUTION  10
+#define HAL_READ_ADC()      HAL_adc_result
+#define HAL_ADC_READY()     true
+
+void HAL_adc_start_conversion(const uint8_t ch);
+uint16_t HAL_adc_get_result();
+
 //
-// Pin Mapping for M42, M43, M226
+// Pin Map
 //
 #define GET_PIN_MAP_PIN(index) index
 #define GET_PIN_MAP_INDEX(pin) pin
@@ -141,18 +169,23 @@ typedef Servo hal_servo_t;
 //
 // Tone
 //
+void toneInit();
 void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
 void noTone(const pin_t _pin);
 
-// ------------------------
-// Class Utilities
-// ------------------------
+// Enable hooks into idle and setup for HAL
+#define HAL_IDLETASK 1
+void HAL_idletask();
+void HAL_init();
+
+//
+// Utility functions
+//
+void _delay_ms(const int delay);
 
 #pragma GCC diagnostic push
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
+#pragma GCC diagnostic ignored "-Wunused-function"
+int freeMemory();
 #pragma GCC diagnostic pop
 
 #ifdef __cplusplus
@@ -162,69 +195,3 @@ char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s
 #ifdef __cplusplus
   }
 #endif
-
-// Return free RAM between end of heap (or end bss) and whatever is current
-int freeMemory();
-
-// ------------------------
-// MarlinHAL Class
-// ------------------------
-
-class MarlinHAL {
-public:
-
-  // Earliest possible init, before setup()
-  MarlinHAL() {}
-
-  static void init();       // Called early in setup()
-  static void init_board(); // Called less early in setup()
-  static void reboot();     // Software reset
-
-  // Interrupts
-  static bool isr_state() { return !__get_PRIMASK(); }
-  static void isr_on()  { __enable_irq(); }
-  static void isr_off() { __disable_irq(); }
-
-  static void delay_ms(const int ms) { delay(ms); }
-
-  // Tasks, called from idle()
-  static void idletask();
-
-  // Reset
-  static uint8_t get_reset_source();
-  static void clear_reset_source() {}
-
-  // Free SRAM
-  static int freeMemory() { return ::freeMemory(); }
-
-  //
-  // ADC Methods
-  //
-
-  static uint16_t adc_result;
-
-  // Called by Temperature::init once at startup
-  static void adc_init() {}
-
-  // Called by Temperature::init for each sensor at startup
-  static void adc_enable(const uint8_t ch) {}
-
-  // Begin ADC sampling on the given channel. Called from Temperature::isr!
-  static void adc_start(const uint8_t ch) { adc_result = analogRead(ch); }
-
-  // Is the ADC ready for reading?
-  static bool adc_ready() { return true; }
-
-  // The current value of the ADC register
-  static uint16_t adc_value() { return adc_result; }
-
-  /**
-   * Set the PWM duty cycle for the pin to the given value.
-   * No inverting the duty cycle in this HAL.
-   * No changing the maximum size of the provided value to enable finer PWM duty control in this HAL.
-   */
-  static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t=255, const bool=false) {
-    analogWrite(pin, v);
-  }
-
-};

Marlin/src/HAL/DUE/HAL_MinSerial.cpp

@@ -1,91 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfigPre.h"
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-
-#include "../shared/HAL_MinSerial.h"
-
-#include <stdarg.h>
-
-static void TXBegin() {
-  // Disable UART interrupt in NVIC
-  NVIC_DisableIRQ( UART_IRQn );
-
-  // We NEED memory barriers to ensure Interrupts are actually disabled!
-  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
-  __DSB();
-  __ISB();
-
-  // Disable clock
-  pmc_disable_periph_clk( ID_UART );
-
-  // Configure PMC
-  pmc_enable_periph_clk( ID_UART );
-
-  // Disable PDC channel
-  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
-
-  // Reset and disable receiver and transmitter
-  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
-
-  // Configure mode: 8bit, No parity, 1 bit stop
-  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
-
-  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
-  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
-
-  // Enable receiver and transmitter
-  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
-}
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() __asm__ volatile("": : :"memory");
-static void TX(char c) {
-  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
-  UART->UART_THR = c;
-}
-
-void install_min_serial() {
-  HAL_min_serial_init = &TXBegin;
-  HAL_min_serial_out = &TX;
-}
-
-#if DISABLED(DYNAMIC_VECTORTABLE)
-extern "C" {
-  __attribute__((naked)) void JumpHandler_ASM() {
-    __asm__ __volatile__ (
-      "b CommonHandler_ASM\n"
-    );
-  }
-  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
-}
-#endif
-
-#endif // POSTMORTEM_DEBUGGING
-#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -30,7 +30,7 @@
  */
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
  *
  * For ARDUINO_ARCH_SAM
  */
@@ -56,8 +56,8 @@
   #pragma GCC optimize (3)
 
   typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
-  typedef void    (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
-  typedef void    (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
+  typedef void    (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
+  typedef void    (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
 
   /* ---------------- Macros to be able to access definitions from asm */
   #define _PORT(IO) DIO ##  IO ## _WPORT
@@ -69,10 +69,10 @@
 
   // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
   static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
     uint32_t idx = 0;
 
     /* Negate bout, as the assembler requires a negated value */
@@ -154,9 +154,9 @@
   static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -225,36 +225,36 @@
   static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(SD_MOSI_PIN, b & 0x80);
+      WRITE(MOSI_PIN, b & 0x80);
       b <<= 1;        // little setup time
 
-      WRITE(SD_SCK_PIN, HIGH);
+      WRITE(SCK_PIN, HIGH);
       DELAY_NS(125);  // 10 cycles @ 84mhz
 
-      b |= (READ(SD_MISO_PIN) != 0);
+      b |= (READ(MISO_PIN) != 0);
 
-      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SCK_PIN, LOW);
       DELAY_NS(125);  // 10 cycles @ 84mhz
     } while (--bits);
     return b;
   }
 
   // all the others
-  static uint16_t spiDelayNS = 4000; // 4000ns => 125khz
+  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz
 
   static uint8_t spiTransferX(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(SD_MOSI_PIN, b & 0x80);
+      WRITE(MOSI_PIN, b & 0x80);
       b <<= 1; // little setup time
 
-      WRITE(SD_SCK_PIN, HIGH);
-      DELAY_NS(spiDelayNS);
+      WRITE(SCK_PIN, HIGH);
+      __delay_4cycles(spiDelayCyclesX4);
 
-      b |= (READ(SD_MISO_PIN) != 0);
+      b |= (READ(MISO_PIN) != 0);
 
-      WRITE(SD_SCK_PIN, LOW);
-      DELAY_NS(spiDelayNS);
+      WRITE(SCK_PIN, LOW);
+      __delay_4cycles(spiDelayCyclesX4);
     } while (--bits);
     return b;
   }
@@ -270,11 +270,11 @@
   static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
 
   // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
-  static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+  static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
     uint32_t work = 0;
     uint32_t txval = 0;
 
@@ -349,12 +349,12 @@
     );
   }
 
-  static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
+  static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -425,48 +425,48 @@
     );
   }
 
-  static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
+  static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
     do {
       (void)spiTransferTx(*buf++);
     } while (--todo);
   }
 
-  static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
+  static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
     do {
       *buf++ = spiTransferRx(0xFF);
     } while (--todo);
   }
 
-  // Pointers to generic functions for block transfers
+  // Pointers to generic functions for block tranfers
   static pfnSpiTxBlock spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
   static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
 
   #if MB(ALLIGATOR)
-    #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
+    #define _SS_WRITE(S) WRITE(SS_PIN, S)
   #else
     #define _SS_WRITE(S) NOOP
   #endif
 
   void spiBegin() {
-    SET_OUTPUT(SD_SS_PIN);
+    SET_OUTPUT(SS_PIN);
     _SS_WRITE(HIGH);
-    SET_OUTPUT(SD_SCK_PIN);
-    SET_INPUT(SD_MISO_PIN);
-    SET_OUTPUT(SD_MOSI_PIN);
+    SET_OUTPUT(SCK_PIN);
+    SET_INPUT(MISO_PIN);
+    SET_OUTPUT(MOSI_PIN);
   }
 
   uint8_t spiRec() {
     _SS_WRITE(LOW);
-    WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
+    WRITE(MOSI_PIN, HIGH); // Output 1s 1
     uint8_t b = spiTransferRx(0xFF);
     _SS_WRITE(HIGH);
     return b;
   }
 
-  void spiRead(uint8_t *buf, uint16_t nbyte) {
+  void spiRead(uint8_t* buf, uint16_t nbyte) {
     if (nbyte) {
       _SS_WRITE(LOW);
-      WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
+      WRITE(MOSI_PIN, HIGH); // Output 1s 1
       spiRxBlock(buf, nbyte);
       _SS_WRITE(HIGH);
     }
@@ -478,7 +478,7 @@
     _SS_WRITE(HIGH);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
+  void spiSendBlock(uint8_t token, const uint8_t* buf) {
     _SS_WRITE(LOW);
     (void)spiTransferTx(token);
     spiTxBlock(buf, 512);
@@ -510,7 +510,7 @@
         spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
         break;
       default:
-        spiDelayNS = 4000 >> (6 - spiRate); // spiRate of 2 gives the maximum error with current CPU
+        spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate);
         spiTransferTx = (pfnSpiTransfer)spiTransferX;
         spiTransferRx = (pfnSpiTransfer)spiTransferX;
         spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
@@ -519,8 +519,8 @@
     }
 
     _SS_WRITE(HIGH);
-    WRITE(SD_MOSI_PIN, HIGH);
-    WRITE(SD_SCK_PIN, LOW);
+    WRITE(MOSI_PIN, HIGH);
+    WRITE(SCK_PIN, LOW);
   }
 
   /** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,34 +575,38 @@
 
       // Configure SPI pins
       PIO_Configure(
-         g_APinDescription[SD_SCK_PIN].pPort,
-         g_APinDescription[SD_SCK_PIN].ulPinType,
-         g_APinDescription[SD_SCK_PIN].ulPin,
-         g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
+         g_APinDescription[SCK_PIN].pPort,
+         g_APinDescription[SCK_PIN].ulPinType,
+         g_APinDescription[SCK_PIN].ulPin,
+         g_APinDescription[SCK_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[SD_MOSI_PIN].pPort,
-         g_APinDescription[SD_MOSI_PIN].ulPinType,
-         g_APinDescription[SD_MOSI_PIN].ulPin,
-         g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
+         g_APinDescription[MOSI_PIN].pPort,
+         g_APinDescription[MOSI_PIN].ulPinType,
+         g_APinDescription[MOSI_PIN].ulPin,
+         g_APinDescription[MOSI_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[SD_MISO_PIN].pPort,
-         g_APinDescription[SD_MISO_PIN].ulPinType,
-         g_APinDescription[SD_MISO_PIN].ulPin,
-         g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
+         g_APinDescription[MISO_PIN].pPort,
+         g_APinDescription[MISO_PIN].ulPinType,
+         g_APinDescription[MISO_PIN].ulPin,
+         g_APinDescription[MISO_PIN].ulPinConfiguration);
 
       // set master mode, peripheral select, fault detection
       SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
       SPI_Enable(SPI0);
 
-      SET_OUTPUT(DAC0_SYNC_PIN);
-      #if HAS_MULTI_EXTRUDER
-        OUT_WRITE(DAC1_SYNC_PIN, HIGH);
+      SET_OUTPUT(DAC0_SYNC);
+      #if EXTRUDERS > 1
+        SET_OUTPUT(DAC1_SYNC);
+        WRITE(DAC1_SYNC, HIGH);
       #endif
-      WRITE(DAC0_SYNC_PIN, HIGH);
-      OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
-      OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
-      OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
-      WRITE(SD_SS_PIN, HIGH);
+      SET_OUTPUT(SPI_EEPROM1_CS);
+      SET_OUTPUT(SPI_EEPROM2_CS);
+      SET_OUTPUT(SPI_FLASH_CS);
+      WRITE(DAC0_SYNC, HIGH);
+      WRITE(SPI_EEPROM1_CS, HIGH);
+      WRITE(SPI_EEPROM2_CS, HIGH);
+      WRITE(SPI_FLASH_CS, HIGH);
+      WRITE(SS_PIN, HIGH);
 
       OUT_WRITE(SDSS, LOW);
 
@@ -641,7 +645,7 @@
     }
 
     // Read from SPI into buffer
-    void spiRead(uint8_t *buf, uint16_t nbyte) {
+    void spiRead(uint8_t* buf, uint16_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (int i = 0; i < nbyte; i++) {
@@ -664,7 +668,7 @@
       //DELAY_US(1U);
     }
 
-    void spiSend(const uint8_t *buf, size_t nbyte) {
+    void spiSend(const uint8_t* buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -685,7 +689,7 @@
       FLUSH_RX();
     }
 
-    void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
+    void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -698,7 +702,7 @@
     }
 
     // Write from buffer to SPI
-    void spiSendBlock(uint8_t token, const uint8_t *buf) {
+    void spiSendBlock(uint8_t token, const uint8_t* buf) {
       SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
       WHILE_TX(0);
       //WHILE_RX(0);
@@ -755,6 +759,7 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
+     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)
@@ -797,19 +802,19 @@
 
     uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
 
-    void spiRead(uint8_t *buf, uint16_t nbyte) {
+    void spiRead(uint8_t* buf, uint16_t nbyte) {
       for (int i = 0; i < nbyte; i++)
         buf[i] = spiTransfer(0xFF);
     }
 
     void spiSend(uint8_t data) { spiTransfer(data); }
 
-    void spiSend(const uint8_t *buf, size_t nbyte) {
+    void spiSend(const uint8_t* buf, size_t nbyte) {
       for (uint16_t i = 0; i < nbyte; i++)
         spiTransfer(buf[i]);
     }
 
-    void spiSendBlock(uint8_t token, const uint8_t *buf) {
+    void spiSendBlock(uint8_t token, const uint8_t* buf) {
       spiTransfer(token);
       for (uint16_t i = 0; i < 512; i++)
         spiTransfer(buf[i]);

Marlin/src/HAL/DUE/InterruptVectors.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 

Marlin/src/HAL/DUE/InterruptVectors.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/MarlinSPI.h

@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <SPI.h>
-
-using MarlinSPI = SPIClass;

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -382,7 +382,7 @@ void MarlinSerial<Cfg>::flush() {
 }
 
 template<typename Cfg>
-size_t MarlinSerial<Cfg>::write(const uint8_t c) {
+void MarlinSerial<Cfg>::write(const uint8_t c) {
   _written = true;
 
   if (Cfg::TX_SIZE == 0) {
@@ -400,13 +400,13 @@ size_t MarlinSerial<Cfg>::write(const uint8_t c) {
     // XOFF char at the RX isr, but it is properly handled there
     if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) {
       HWUART->UART_THR = c;
-      return 1;
+      return;
     }
 
     const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
 
     // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!hal.isr_state()) {
+    if (!ISRS_ENABLED()) {
 
       // Make room by polling if it is possible to transmit, and do so!
       while (i == tx_buffer.tail) {
@@ -428,7 +428,6 @@ size_t MarlinSerial<Cfg>::write(const uint8_t c) {
     // Enable TX isr - Non atomic, but it will eventually enable TX isr
     HWUART->UART_IER = UART_IER_TXRDY;
   }
-  return 1;
 }
 
 template<typename Cfg>
@@ -454,7 +453,7 @@ void MarlinSerial<Cfg>::flushTX() {
     if (!_written) return;
 
     // If global interrupts are disabled (as the result of being called from an ISR)...
-    if (!hal.isr_state()) {
+    if (!ISRS_ENABLED()) {
 
       // Wait until everything was transmitted - We must do polling, as interrupts are disabled
       while (tx_buffer.head != tx_buffer.tail || !(HWUART->UART_SR & UART_SR_TXEMPTY)) {
@@ -474,21 +473,169 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
+/**
+ * Imports from print.h
+ */
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(char c, int base) {
+  print((long)c, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(unsigned char b, int base) {
+  print((unsigned long)b, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(int n, int base) {
+  print((long)n, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(unsigned int n, int base) {
+  print((unsigned long)n, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(long n, int base) {
+  if (base == 0) write(n);
+  else if (base == 10) {
+    if (n < 0) { print('-'); n = -n; }
+    printNumber(n, 10);
+  }
+  else
+    printNumber(n, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(unsigned long n, int base) {
+  if (base == 0) write(n);
+  else printNumber(n, base);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::print(double n, int digits) {
+  printFloat(n, digits);
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println() {
+  print('\r');
+  print('\n');
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(const String& s) {
+  print(s);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(const char c[]) {
+  print(c);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(char c, int base) {
+  print(c, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(unsigned char b, int base) {
+  print(b, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(int n, int base) {
+  print(n, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(unsigned int n, int base) {
+  print(n, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(long n, int base) {
+  print(n, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(unsigned long n, int base) {
+  print(n, base);
+  println();
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::println(double n, int digits) {
+  print(n, digits);
+  println();
+}
+
+// Private Methods
+template<typename Cfg>
+void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
+  if (n) {
+    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+    int8_t i = 0;
+    while (n) {
+      buf[i++] = n % base;
+      n /= base;
+    }
+    while (i--)
+      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+  }
+  else
+    print('0');
+}
+
+template<typename Cfg>
+void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
+  // Handle negative numbers
+  if (number < 0.0) {
+    print('-');
+    number = -number;
+  }
+
+  // Round correctly so that print(1.999, 2) prints as "2.00"
+  double rounding = 0.5;
+  LOOP_L_N(i, digits) rounding *= 0.1;
+  number += rounding;
+
+  // Extract the integer part of the number and print it
+  unsigned long int_part = (unsigned long)number;
+  double remainder = number - (double)int_part;
+  print(int_part);
+
+  // Print the decimal point, but only if there are digits beyond
+  if (digits) {
+    print('.');
+    // Extract digits from the remainder one at a time
+    while (digits--) {
+      remainder *= 10.0;
+      int toPrint = int(remainder);
+      print(toPrint);
+      remainder -= toPrint;
+    }
+  }
+}
 
 // If not using the USB port as serial port
-#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
-  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
-  MSerialT1 customizedSerial1(MarlinSerialCfg<SERIAL_PORT>::EMERGENCYPARSER);
+#if SERIAL_PORT >= 0
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> >;
-  MSerialT2 customizedSerial2(MarlinSerialCfg<SERIAL_PORT_2>::EMERGENCYPARSER);
-#endif
-
-#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
-  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> >;
-  MSerialT3 customizedSerial3(MarlinSerialCfg<SERIAL_PORT_3>::EMERGENCYPARSER);
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -30,7 +30,11 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
-#include "../../core/serial_hook.h"
+
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
 
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
@@ -115,15 +119,42 @@ public:
   static int read();
   static void flush();
   static ring_buffer_pos_t available();
-  static size_t write(const uint8_t c);
+  static void write(const uint8_t c);
   static void flushTX();
 
-  static bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
-
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
   FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
   FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
+
+  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
+  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
+  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
+  FORCE_INLINE static void print(const char* str) { write(str); }
+
+  static void print(char, int = 0);
+  static void print(unsigned char, int = 0);
+  static void print(int, int = DEC);
+  static void print(unsigned int, int = DEC);
+  static void print(long, int = DEC);
+  static void print(unsigned long, int = DEC);
+  static void print(double, int = 2);
+
+  static void println(const String& s);
+  static void println(const char[]);
+  static void println(char, int = 0);
+  static void println(unsigned char, int = 0);
+  static void println(int, int = DEC);
+  static void println(unsigned int, int = DEC);
+  static void println(long, int = DEC);
+  static void println(unsigned long, int = DEC);
+  static void println(double, int = 2);
+  static void println();
+  operator bool() { return true; }
+
+private:
+  static void printNumber(unsigned long, const uint8_t);
+  static void printFloat(double, uint8_t);
 };
 
 // Serial port configuration
@@ -140,17 +171,10 @@ struct MarlinSerialCfg {
   static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
 };
 
-#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
-  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
-  extern MSerialT1 customizedSerial1;
+#if SERIAL_PORT >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
-  extern MSerialT2 customizedSerial2;
-#endif
-
-#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
-  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
-  extern MSerialT3 customizedSerial3;
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
 #endif

Marlin/src/HAL/DUE/MarlinSerialUSB.cpp

@@ -16,16 +16,16 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-#ifdef ARDUINO_ARCH_SAM
 
 /**
  * MarlinSerial_Due.cpp - Hardware serial library for Arduino DUE
  * Copyright (c) 2017 Eduardo José Tagle. All right reserved
  * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
  */
+#ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 
@@ -33,6 +33,10 @@
 
 #include "MarlinSerialUSB.h"
 
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
 // Imports from Atmel USB Stack/CDC implementation
 extern "C" {
   bool usb_task_cdc_isenabled();
@@ -41,11 +45,15 @@ extern "C" {
   int udi_cdc_getc();
   bool udi_cdc_is_tx_ready();
   int udi_cdc_putc(int value);
-}
+};
 
 // Pending character
 static int pending_char = -1;
 
+#if ENABLED(EMERGENCY_PARSER)
+  static EmergencyParser::State emergency_state; // = EP_RESET
+#endif
+
 // Public Methods
 void MarlinSerialUSB::begin(const long) {}
 
@@ -65,7 +73,9 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)pending_char));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)pending_char);
+  #endif
 
   return pending_char;
 }
@@ -87,27 +97,31 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)c));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)c);
+  #endif
 
   return c;
 }
 
-int MarlinSerialUSB::available() {
-  if (pending_char > 0) return pending_char;
-  return pending_char == 0 ||
-    // or USB CDC enumerated and configured on the PC side and some bytes where sent to us */
-    (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
+bool MarlinSerialUSB::available() {
+    /* If Pending chars */
+  return pending_char >= 0 ||
+    /* or USB CDC enumerated and configured on the PC side and some
+       bytes where sent to us */
+      (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
 }
 
 void MarlinSerialUSB::flush() { }
+void MarlinSerialUSB::flushTX() { }
 
-size_t MarlinSerialUSB::write(const uint8_t c) {
+void MarlinSerialUSB::write(const uint8_t c) {
 
   /* Do not even bother sending anything if USB CDC is not enumerated
      or not configured on the PC side or there is no program on the PC
      listening to our messages */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return 0;
+    return;
 
   /* Wait until the PC has read the pending to be sent data */
   while (usb_task_cdc_isenabled() &&
@@ -119,23 +133,161 @@ size_t MarlinSerialUSB::write(const uint8_t c) {
      or not configured on the PC side or there is no program on the PC
      listening to our messages at this point */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return 0;
+    return;
 
   // Fifo full
   //  udi_cdc_signal_overrun();
   udi_cdc_putc(c);
-  return 1;
+}
+
+/**
+ * Imports from print.h
+ */
+
+void MarlinSerialUSB::print(char c, int base) {
+  print((long)c, base);
+}
+
+void MarlinSerialUSB::print(unsigned char b, int base) {
+  print((unsigned long)b, base);
+}
+
+void MarlinSerialUSB::print(int n, int base) {
+  print((long)n, base);
+}
+
+void MarlinSerialUSB::print(unsigned int n, int base) {
+  print((unsigned long)n, base);
+}
+
+void MarlinSerialUSB::print(long n, int base) {
+  if (base == 0)
+    write(n);
+  else if (base == 10) {
+    if (n < 0) {
+      print('-');
+      n = -n;
+    }
+    printNumber(n, 10);
+  }
+  else
+    printNumber(n, base);
+}
+
+void MarlinSerialUSB::print(unsigned long n, int base) {
+  if (base == 0) write(n);
+  else printNumber(n, base);
+}
+
+void MarlinSerialUSB::print(double n, int digits) {
+  printFloat(n, digits);
+}
+
+void MarlinSerialUSB::println() {
+  print('\r');
+  print('\n');
+}
+
+void MarlinSerialUSB::println(const String& s) {
+  print(s);
+  println();
+}
+
+void MarlinSerialUSB::println(const char c[]) {
+  print(c);
+  println();
+}
+
+void MarlinSerialUSB::println(char c, int base) {
+  print(c, base);
+  println();
+}
+
+void MarlinSerialUSB::println(unsigned char b, int base) {
+  print(b, base);
+  println();
+}
+
+void MarlinSerialUSB::println(int n, int base) {
+  print(n, base);
+  println();
+}
+
+void MarlinSerialUSB::println(unsigned int n, int base) {
+  print(n, base);
+  println();
+}
+
+void MarlinSerialUSB::println(long n, int base) {
+  print(n, base);
+  println();
+}
+
+void MarlinSerialUSB::println(unsigned long n, int base) {
+  print(n, base);
+  println();
+}
+
+void MarlinSerialUSB::println(double n, int digits) {
+  print(n, digits);
+  println();
+}
+
+// Private Methods
+
+void MarlinSerialUSB::printNumber(unsigned long n, uint8_t base) {
+  if (n) {
+    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+    int8_t i = 0;
+    while (n) {
+      buf[i++] = n % base;
+      n /= base;
+    }
+    while (i--)
+      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+  }
+  else
+    print('0');
+}
+
+void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
+  // Handle negative numbers
+  if (number < 0.0) {
+    print('-');
+    number = -number;
+  }
+
+  // Round correctly so that print(1.999, 2) prints as "2.00"
+  double rounding = 0.5;
+  LOOP_L_N(i, digits)
+    rounding *= 0.1;
+
+  number += rounding;
+
+  // Extract the integer part of the number and print it
+  unsigned long int_part = (unsigned long)number;
+  double remainder = number - (double)int_part;
+  print(int_part);
+
+  // Print the decimal point, but only if there are digits beyond
+  if (digits) {
+    print('.');
+    // Extract digits from the remainder one at a time
+    while (digits--) {
+      remainder *= 10.0;
+      int toPrint = int(remainder);
+      print(toPrint);
+      remainder -= toPrint;
+    }
+  }
 }
 
 // Preinstantiate
 #if SERIAL_PORT == -1
-  MSerialT1 customizedSerial1(TERN0(EMERGENCY_PARSER, true));
+  MarlinSerialUSB customizedSerial1;
 #endif
 #if SERIAL_PORT_2 == -1
-  MSerialT2 customizedSerial2(TERN0(EMERGENCY_PARSER, true));
-#endif
-#if SERIAL_PORT_3 == -1
-  MSerialT3 customizedSerial3(TERN0(EMERGENCY_PARSER, true));
+  MarlinSerialUSB customizedSerial2;
 #endif
 
 #endif // HAS_USB_SERIAL

Marlin/src/HAL/DUE/MarlinSerialUSB.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -27,39 +27,73 @@
  */
 
 #include "../../inc/MarlinConfig.h"
-#include "../../core/serial_hook.h"
+
+#if HAS_USB_SERIAL
 
 #include <WString.h>
 
-struct MarlinSerialUSB {
-  void begin(const long);
-  void end();
-  int peek();
-  int read();
-  void flush();
-  int available();
-  size_t write(const uint8_t c);
+#define DEC 10
+#define HEX 16
+#define OCT 8
+#define BIN 2
+
+class MarlinSerialUSB {
+
+public:
+  MarlinSerialUSB() {};
+  static void begin(const long);
+  static void end();
+  static int peek();
+  static int read();
+  static void flush();
+  static void flushTX();
+  static bool available();
+  static void write(const uint8_t c);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
-    FORCE_INLINE uint32_t dropped() { return 0; }
+    FORCE_INLINE static uint32_t dropped() { return 0; }
   #endif
 
   #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-    FORCE_INLINE int rxMaxEnqueued() { return 0; }
+    FORCE_INLINE static int rxMaxEnqueued() { return 0; }
   #endif
+
+  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
+  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
+  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
+  FORCE_INLINE static void print(const char* str) { write(str); }
+
+  static void print(char, int = 0);
+  static void print(unsigned char, int = 0);
+  static void print(int, int = DEC);
+  static void print(unsigned int, int = DEC);
+  static void print(long, int = DEC);
+  static void print(unsigned long, int = DEC);
+  static void print(double, int = 2);
+
+  static void println(const String& s);
+  static void println(const char[]);
+  static void println(char, int = 0);
+  static void println(unsigned char, int = 0);
+  static void println(int, int = DEC);
+  static void println(unsigned int, int = DEC);
+  static void println(long, int = DEC);
+  static void println(unsigned long, int = DEC);
+  static void println(double, int = 2);
+  static void println();
+  operator bool() { return true; }
+
+private:
+  static void printNumber(unsigned long, const uint8_t);
+  static void printFloat(double, uint8_t);
 };
 
 #if SERIAL_PORT == -1
-  typedef Serial1Class<MarlinSerialUSB> MSerialT1;
-  extern MSerialT1 customizedSerial1;
+  extern MarlinSerialUSB customizedSerial1;
 #endif
 
 #if SERIAL_PORT_2 == -1
-  typedef Serial1Class<MarlinSerialUSB> MSerialT2;
-  extern MSerialT2 customizedSerial2;
+  extern MarlinSerialUSB customizedSerial2;
 #endif
 
-#if SERIAL_PORT_3 == -1
-  typedef Serial1Class<MarlinSerialUSB> MSerialT3;
-  extern MSerialT3 customizedSerial3;
-#endif
+#endif // HAS_USB_SERIAL

Marlin/src/HAL/DUE/Servo.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -44,6 +44,7 @@
 
 #if HAS_SERVOS
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/DUE/Tone.cpp

@@ -18,37 +18,38 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
+#include "timers.h"
 
 static pin_t tone_pin;
 volatile static int32_t toggles;
 
-void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration/*=0*/) {
+void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
   tone_pin = _pin;
   toggles = 2 * frequency * duration / 1000;
-  HAL_timer_start(MF_TIMER_TONE, 2 * frequency);
+  HAL_timer_start(TONE_TIMER_NUM, 2 * frequency);
 }
 
 void noTone(const pin_t _pin) {
-  HAL_timer_disable_interrupt(MF_TIMER_TONE);
+  HAL_timer_disable_interrupt(TONE_TIMER_NUM);
   extDigitalWrite(_pin, LOW);
 }
 
 HAL_TONE_TIMER_ISR() {
   static uint8_t pin_state = 0;
-  HAL_timer_isr_prologue(MF_TIMER_TONE);
+  HAL_timer_isr_prologue(TONE_TIMER_NUM);
 
   if (toggles) {
     toggles--;

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -16,10 +16,11 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
+
 /**
  * Based on u8g_com_msp430_hw_spi.c
  *
@@ -51,23 +52,25 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
 #include "../../../MarlinCore.h"
 
-#ifndef LCD_SPI_SPEED
-  #define LCD_SPI_SPEED SPI_QUARTER_SPEED
-#endif
+void spiBegin();
+void spiInit(uint8_t spiRate);
+void spiSend(uint8_t b);
+void spiSend(const uint8_t* buf, size_t n);
 
-#include "../../shared/HAL_SPI.h"
+#include "../../shared/Marduino.h"
 #include "../fastio.h"
 
 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
@@ -98,7 +101,11 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 
       spiBegin();
 
-      spiInit(LCD_SPI_SPEED);
+      #ifndef SPI_SPEED
+        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
+      #endif
+      spiInit(2);
+
       break;
 
     case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -138,6 +145,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 
-#endif // __SAM3X8E__
+#endif //__SAM3X8E__

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,12 +57,11 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if IS_U8GLIB_ST7920
+#if ENABLED(U8GLIB_ST7920)
 
-#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -146,7 +145,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/marlinui.h"
+  #include "../../../lcd/ultralcd.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS
@@ -182,5 +181,5 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   }
 #endif // LIGHTWEIGHT_UI
 
-#endif // IS_U8GLIB_ST7920
+#endif // U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,14 +57,17 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB && !IS_U8GLIB_ST7920
+#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
+
+#undef SPI_SPEED
+#define SPI_SPEED 2  // About 2 MHz
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
 #include "../../shared/Marduino.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
@@ -141,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_MARLINUI_U8GLIB && !IS_U8GLIB_ST7920
+#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,12 +57,11 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_MARLINUI_U8GLIB
+#if HAS_GRAPHICAL_LCD
 
-#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -109,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_MARLINUI_U8GLIB
+#endif // HAS_GRAPHICAL_LCD
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h

@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 #include "../../../inc/MarlinConfigPre.h"
 #include "../../shared/Marduino.h"
-#include <U8glib-HAL.h>
+#include <U8glib.h>
 
 void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
 void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -47,33 +47,43 @@ void endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
-  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
-  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
-  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
-  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
-  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
-  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
-  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
-  TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
-  TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
-  TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
-  TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
-  TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
-  TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
+  #if HAS_X_MAX
+    _ATTACH(X_MAX_PIN);
+  #endif
+  #if HAS_X_MIN
+    _ATTACH(X_MIN_PIN);
+  #endif
+  #if HAS_Y_MAX
+    _ATTACH(Y_MAX_PIN);
+  #endif
+  #if HAS_Y_MIN
+    _ATTACH(Y_MIN_PIN);
+  #endif
+  #if HAS_Z_MAX
+    _ATTACH(Z_MAX_PIN);
+  #endif
+  #if HAS_Z_MIN
+     _ATTACH(Z_MIN_PIN);
+  #endif
+  #if HAS_Z2_MAX
+    _ATTACH(Z2_MAX_PIN);
+  #endif
+  #if HAS_Z2_MIN
+    _ATTACH(Z2_MIN_PIN);
+  #endif
+  #if HAS_Z3_MAX
+    _ATTACH(Z3_MAX_PIN);
+  #endif
+  #if HAS_Z3_MIN
+    _ATTACH(Z3_MIN_PIN);
+  #endif
+  #if HAS_Z4_MAX
+    _ATTACH(Z4_MAX_PIN);
+  #endif
+  #if HAS_Z4_MIN
+    _ATTACH(Z4_MIN_PIN);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    _ATTACH(Z_MIN_PROBE_PIN);
+  #endif
 }

Marlin/src/HAL/DUE/fastio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -33,7 +33,7 @@
  * For ARDUINO_ARCH_SAM
  * Note the code here was specifically crafted by disassembling what GCC produces
  * out of it, so GCC is able to optimize it out as much as possible to the least
- * amount of instructions. Be very careful if you modify them, as "clean code"
+ * amount of instructions. Be very carefull if you modify them, as "clean code"
  * leads to less efficient compiled code!!
  */
 
@@ -50,7 +50,7 @@
 #define PWM_PIN(P)              WITHIN(P, 2, 13)
 
 #ifndef MASK
-  #define MASK(PIN) _BV(PIN)
+  #define MASK(PIN) (1 << PIN)
 #endif
 
 /**
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin
@@ -163,13 +163,10 @@
 #define SET_INPUT(IO)        _SET_INPUT(IO)
 // Set pin as input with pullup (wrapper)
 #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
-// Set pin as input with pulldown (substitution)
-#define SET_INPUT_PULLDOWN   SET_INPUT
-
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
@@ -177,7 +174,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
 
 // Shorthand
-#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
 
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)
@@ -480,7 +477,7 @@
 #define DIO91_PIN 15
 #define DIO91_WPORT PIOB
 
-#ifdef ARDUINO_SAM_ARCHIM
+#if ARDUINO_SAM_ARCHIM
 
   #define DIO92_PIN 11
   #define DIO92_WPORT PIOC

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -25,7 +25,7 @@
  * is NOT used to directly toggle pins. The ISR writes to the pin assigned to
  * that interrupt.
  *
- * All PWMs use the same repetition rate.  The G2 needs about 10kHz min in order to
+ * All PWMs use the same repetition rate.  The G2 needs about 10KHz min in order to
  * not have obvious ripple on the Vref signals.
  *
  * The data structures are setup to minimize the computation done by the ISR which
@@ -46,31 +46,6 @@
 
 #include "G2_PWM.h"
 
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-  #define G2_PWM_X 1
-#else
-  #define G2_PWM_X 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-  #define G2_PWM_Y 1
-#else
-  #define G2_PWM_Y 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-  #define G2_PWM_Z 1
-#else
-  #define G2_PWM_Z 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
-#define G2_MASK_X(V) (G2_PWM_X * (V))
-#define G2_MASK_Y(V) (G2_PWM_Y * (V))
-#define G2_MASK_Z(V) (G2_PWM_Z * (V))
-#define G2_MASK_E(V) (G2_PWM_E * (V))
-
 volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
                   *SODR_B = &PIOB->PIO_SODR,
                   *CODR_A = &PIOA->PIO_CODR,
@@ -80,18 +55,10 @@ PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
 
 void Stepper::digipot_init() {
 
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
-  #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
-  #endif
-  #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
-  #endif
-  #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
-  #endif
+  OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
 
   #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
   #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
@@ -104,82 +71,54 @@ void Stepper::digipot_init() {
   PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
   PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
   PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
-  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
-  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
-  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
-  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;                    // set channel 1 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;                    // set channel 2 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;                    // set channel 3 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;                    // set channel 4 to Clock A input & to left aligned
 
   PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
 
   PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
-  PWM->PWM_IER2 = PWM_IER2_CMPM0
-    | G2_MASK_X(PWM_IER2_CMPM1)
-    | G2_MASK_Y(PWM_IER2_CMPM2)
-    | G2_MASK_Z(PWM_IER2_CMPM3)
-    | G2_MASK_E(PWM_IER2_CMPM4)
-  ; // generate interrupt on compare event
+  PWM->PWM_IER2 = PWM_IER2_CMPM0 | PWM_IER2_CMPM1 | PWM_IER2_CMPM2 | PWM_IER2_CMPM3 | PWM_IER2_CMPM4;        // generate interrupt on compare event
 
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+  PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1]));   // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2]));   // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
 
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
 
-  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
-    | G2_MASK_X(PWM_SCM_SYNC1)
-    | G2_MASK_Y(PWM_SCM_SYNC2)
-    | G2_MASK_Z(PWM_SCM_SYNC3)
-    | G2_MASK_E(PWM_SCM_SYNC4)
-  ; // sync 1-4 with 0, use mode 0 for updates
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0 | PWM_SCM_SYNC1 | PWM_SCM_SYNC2 | PWM_SCM_SYNC3 | PWM_SCM_SYNC4; // sync 1-4 with 0, use mode 0 for updates
 
-  PWM->PWM_ENA = PWM_ENA_CHID0
-    | G2_MASK_X(PWM_ENA_CHID1)
-    | G2_MASK_Y(PWM_ENA_CHID2)
-    | G2_MASK_Z(PWM_ENA_CHID3)
-    | G2_MASK_E(PWM_ENA_CHID4)
-  ; // enable channels used by G2
-
-  PWM->PWM_IER1 = PWM_IER1_CHID0
-    | G2_MASK_X(PWM_IER1_CHID1)
-    | G2_MASK_Y(PWM_IER1_CHID2)
-    | G2_MASK_Z(PWM_IER1_CHID3)
-    | G2_MASK_E(PWM_IER1_CHID4)
-  ; // enable interrupts for channels used by G2
+  PWM->PWM_ENA = PWM_ENA_CHID0 | PWM_ENA_CHID1 | PWM_ENA_CHID2 | PWM_ENA_CHID3 | PWM_ENA_CHID4;         // enable the channels used by G2
+  PWM->PWM_IER1 = PWM_IER1_CHID0 | PWM_IER1_CHID1 | PWM_IER1_CHID2 | PWM_IER1_CHID3 | PWM_IER1_CHID4;        // enable interrupts for the channels used by G2
 
   NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
   NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
 }
 
-void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
+void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
 
   if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
 
   switch (driver) {
-    case 0:
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      break;
-    case 1:
-      if (G2_PWM_Z) {
-        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
-        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-    default:
-      if (G2_PWM_E) {
-        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
-        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
+    case 0: PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+            PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+            PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    case 1: PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+            PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    default:PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+            PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
   }
 }
 
@@ -188,17 +127,17 @@ volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
 void PWM_Handler() {
   PWM_ISR1_STATUS = PWM->PWM_ISR1;
   PWM_ISR2_STATUS = PWM->PWM_ISR2;
-  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
-    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
-    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
-    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
-    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                           // CHAN_0 interrupt
+    *ISR_table[0].set_register = ISR_table[0].write_mask;                                          // set X to active
+    *ISR_table[1].set_register = ISR_table[1].write_mask;                                          // set Y to active
+    *ISR_table[2].set_register = ISR_table[2].write_mask;                                          // set Z to active
+    *ISR_table[3].set_register = ISR_table[3].write_mask;                                          // set E to active
   }
   else {
-    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
-    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
-    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
-    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM1)  *ISR_table[0].clr_register = ISR_table[0].write_mask;   // set X to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM2)  *ISR_table[1].clr_register = ISR_table[1].write_mask;   // set Y to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM3)  *ISR_table[2].clr_register = ISR_table[2].write_mask;   // set Z to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM4)  *ISR_table[3].clr_register = ISR_table[3].write_mask;   // set E to inactive
   }
   return;
 }

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/inc/Conditionals_LCD.h

@@ -16,11 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/DUE."
-#endif

Marlin/src/HAL/DUE/inc/Conditionals_adv.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -16,13 +16,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
-#if USE_FALLBACK_EEPROM
+#if USE_EMULATED_EEPROM
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
   #define FLASH_EEPROM_EMULATION
-#elif EITHER(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
 #endif

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -40,7 +40,7 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
+#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
 
 #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
@@ -52,14 +52,10 @@
   #endif
 #endif
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
+#if ENABLED(FAST_PWM_FAN)
+  #error "FAST_PWM_FAN is not yet implemented for this platform."
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on the DUE platform."
-#endif
-
-#if USING_PULLDOWNS
-  #error "PULLDOWN pin mode is not available on DUE boards."
+  #error "TMC220x Software Serial is not supported on this platform."
 #endif

Marlin/src/HAL/DUE/persistent_store_eeprom.cpp

@@ -17,38 +17,42 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #ifdef ARDUINO_ARCH_SAM
 
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
 #include "../../inc/MarlinConfig.h"
+#include "../shared/persistent_store_api.h"
 
-#if USE_WIRED_EEPROM
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
-
-#ifndef MARLIN_EEPROM_SIZE
-  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
+#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
+  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
-bool PersistentStore::access_start()  { eeprom_init(); return true; }
-bool PersistentStore::access_finish() { return true; }
+
+extern void eeprom_flush();
+
+bool PersistentStore::access_start() { return true; }
+
+bool PersistentStore::access_finish() {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    eeprom_flush();
+  #endif
+  return true;
+}
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
       eeprom_write_byte(p, v);
-      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
+      delay(2);
       if (eeprom_read_byte(p) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -57,11 +61,11 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  }
+  };
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;
@@ -72,5 +76,7 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
   return false;
 }
 
-#endif // USE_WIRED_EEPROM
+size_t PersistentStore::capacity() { return E2END + 1; }
+
+#endif // EEPROM_SETTINGS
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/pinsDebug.h

@@ -2,9 +2,6 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -16,7 +13,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
@@ -53,7 +50,7 @@
  *     The net result is that both the g_pinStatus[pin] array and the PIO_OSR register
  *     needs to be looked at when determining if a pin is an input or an output.
  *
- * b) Due has only pins 6, 7, 8 & 9 enabled for PWMs.  FYI - they run at 1kHz
+ * b) Due has only pins 6, 7, 8 & 9 enabled for PWMs.  FYI - they run at 1KHz
  *
  * c) NUM_DIGITAL_PINS does not include the analog pins
  *
@@ -67,7 +64,6 @@
 #define PRINT_PORT(p)
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
 #define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
 #define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
@@ -90,7 +86,7 @@ bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
 void pwm_details(int32_t pin) {
   if (pwm_status(pin)) {
     uint32_t chan = g_APinDescription[pin].ulPWMChannel;
-    SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
+    SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
   }
 }
 
@@ -183,4 +179,5 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
+ *
  */

Marlin/src/HAL/DUE/spi_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -43,22 +43,22 @@
     #define SPI_PIN         87
     #define SPI_CHAN         1
   #endif
-  #define SD_SCK_PIN        76
-  #define SD_MISO_PIN       74
-  #define SD_MOSI_PIN       75
+  #define SCK_PIN           76
+  #define MISO_PIN          74
+  #define MOSI_PIN          75
 #else
   // defaults
   #define DUE_SOFTWARE_SPI
-  #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN      52
+  #ifndef SCK_PIN
+    #define SCK_PIN           52
   #endif
-  #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN     50
+  #ifndef MISO_PIN
+    #define MISO_PIN          50
   #endif
-  #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN     51
+  #ifndef MOSI_PIN
+    #define MOSI_PIN          51
   #endif
 #endif
 
 /* A.28, A.29, B.21, C.26, C.29 */
-#define SD_SS_PIN         SDSS
+#define SS_PIN            SDSS

Marlin/src/HAL/DUE/timers.cpp

@@ -16,12 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -32,6 +34,8 @@
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
+#include "timers.h"
+
 // ------------------------
 // Local defines
 // ------------------------
@@ -42,7 +46,7 @@
 // Private Variables
 // ------------------------
 
-const tTimerConfig timer_config[NUM_HARDWARE_TIMERS] = {
+const tTimerConfig TimerConfig [NUM_HARDWARE_TIMERS] = {
   { TC0, 0, TC0_IRQn,  3}, // 0 - [servo timer5]
   { TC0, 1, TC1_IRQn,  0}, // 1
   { TC0, 2, TC2_IRQn,  2}, // 2 - stepper
@@ -66,9 +70,9 @@ const tTimerConfig timer_config[NUM_HARDWARE_TIMERS] = {
 */
 
 void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
-  Tc *tc = timer_config[timer_num].pTimerRegs;
-  IRQn_Type irq = timer_config[timer_num].IRQ_Id;
-  uint32_t channel = timer_config[timer_num].channel;
+  Tc *tc = TimerConfig[timer_num].pTimerRegs;
+  IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
+  uint32_t channel = TimerConfig[timer_num].channel;
 
   // Disable interrupt, just in case it was already enabled
   NVIC_DisableIRQ(irq);
@@ -86,7 +90,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
 
   pmc_set_writeprotect(false);
   pmc_enable_periph_clk((uint32_t)irq);
-  NVIC_SetPriority(irq, timer_config[timer_num].priority);
+  NVIC_SetPriority(irq, TimerConfig [timer_num].priority);
 
   // wave mode, reset counter on match with RC,
   TC_Configure(tc, channel, TC_CMR_WAVE | TC_CMR_WAVSEL_UP_RC | TC_CMR_TCCLKS_TIMER_CLOCK1);
@@ -105,12 +109,12 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
 }
 
 void HAL_timer_enable_interrupt(const uint8_t timer_num) {
-  IRQn_Type irq = timer_config[timer_num].IRQ_Id;
+  IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
   NVIC_EnableIRQ(irq);
 }
 
 void HAL_timer_disable_interrupt(const uint8_t timer_num) {
-  IRQn_Type irq = timer_config[timer_num].IRQ_Id;
+  IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
   NVIC_DisableIRQ(irq);
 
   // We NEED memory barriers to ensure Interrupts are actually disabled!
@@ -121,11 +125,11 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
 
 // missing from CMSIS: Check if interrupt is enabled or not
 static bool NVIC_GetEnabledIRQ(IRQn_Type IRQn) {
-  return TEST(NVIC->ISER[uint32_t(IRQn) >> 5], uint32_t(IRQn) & 0x1F);
+  return (NVIC->ISER[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F))) != 0;
 }
 
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
-  IRQn_Type irq = timer_config[timer_num].IRQ_Id;
+  IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
   return NVIC_GetEnabledIRQ(irq);
 }
 

Marlin/src/HAL/DUE/timers.h

@@ -15,13 +15,15 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL Timers for Arduino Due and compatible (SAM3X8E)
+ * HAL for Arduino Due and compatible (SAM3X8E)
+ *
+ * For ARDUINO_ARCH_SAM
  */
 
 #include <stdint.h>
@@ -37,45 +39,35 @@ typedef uint32_t hal_timer_t;
 
 #define HAL_TIMER_RATE         ((F_CPU) / 2)    // frequency of timers peripherals
 
-#ifndef MF_TIMER_STEP
-  #define MF_TIMER_STEP         2  // Timer Index for Stepper
-#endif
-#ifndef MF_TIMER_PULSE
-  #define MF_TIMER_PULSE        MF_TIMER_STEP
-#endif
-#ifndef MF_TIMER_TEMP
-  #define MF_TIMER_TEMP         4  // Timer Index for Temperature
-#endif
-#ifndef MF_TIMER_TONE
-  #define MF_TIMER_TONE         6  // index of timer to use for beeper tones
+#ifndef STEP_TIMER_NUM
+#define STEP_TIMER_NUM 2  // index of timer to use for stepper
 #endif
+#define TEMP_TIMER_NUM 4  // index of timer to use for temperature
+#define PULSE_TIMER_NUM STEP_TIMER_NUM
+#define TONE_TIMER_NUM 6  // index of timer to use for beeper tones
 
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
 
-#define STEPPER_TIMER_RATE          HAL_TIMER_RATE                                        // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
-#define STEPPER_TIMER_TICKS_PER_US  ((STEPPER_TIMER_RATE) / 1000000)                      // stepper timer ticks per µs
-#define STEPPER_TIMER_PRESCALE      (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
+#define STEPPER_TIMER_RATE     HAL_TIMER_RATE   // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
+#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
 
-#define PULSE_TIMER_RATE            STEPPER_TIMER_RATE                                    // frequency of pulse timer
-#define PULSE_TIMER_PRESCALE        STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US    STEPPER_TIMER_TICKS_PER_US
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
 
-#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(MF_TIMER_STEP)
-#define DISABLE_STEPPER_DRIVER_INTERRUPT()  HAL_timer_disable_interrupt(MF_TIMER_STEP)
-#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(MF_TIMER_STEP)
+#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT()  HAL_timer_disable_interrupt(STEP_TIMER_NUM)
+#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
 
-#define ENABLE_TEMPERATURE_INTERRUPT()  HAL_timer_enable_interrupt(MF_TIMER_TEMP)
-#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_TEMP)
+#define ENABLE_TEMPERATURE_INTERRUPT()  HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
+#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
 
 #ifndef HAL_STEP_TIMER_ISR
   #define HAL_STEP_TIMER_ISR() void TC2_Handler()
 #endif
-#ifndef HAL_TEMP_TIMER_ISR
-  #define HAL_TEMP_TIMER_ISR() void TC4_Handler()
-#endif
-#ifndef HAL_TONE_TIMER_ISR
-  #define HAL_TONE_TIMER_ISR() void TC6_Handler()
-#endif
+#define HAL_TEMP_TIMER_ISR()  void TC4_Handler()
+#define HAL_TONE_TIMER_ISR()  void TC6_Handler()
 
 // ------------------------
 // Types
@@ -92,7 +84,7 @@ typedef struct {
 // Public Variables
 // ------------------------
 
-extern const tTimerConfig timer_config[];
+extern const tTimerConfig TimerConfig[];
 
 // ------------------------
 // Public functions
@@ -101,17 +93,17 @@ extern const tTimerConfig timer_config[];
 void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
 
 FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
-  const tTimerConfig * const pConfig = &timer_config[timer_num];
+  const tTimerConfig * const pConfig = &TimerConfig[timer_num];
   pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_RC = compare;
 }
 
 FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
-  const tTimerConfig * const pConfig = &timer_config[timer_num];
+  const tTimerConfig * const pConfig = &TimerConfig[timer_num];
   return pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_RC;
 }
 
 FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
-  const tTimerConfig * const pConfig = &timer_config[timer_num];
+  const tTimerConfig * const pConfig = &TimerConfig[timer_num];
   return pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_CV;
 }
 
@@ -120,9 +112,9 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num);
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
 
 FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
-  const tTimerConfig * const pConfig = &timer_config[timer_num];
+  const tTimerConfig * const pConfig = &TimerConfig[timer_num];
   // Reading the status register clears the interrupt flag
   pConfig->pTimerRegs->TC_CHANNEL[pConfig->channel].TC_SR;
 }
 
-#define HAL_timer_isr_epilogue(T) NOOP
+#define HAL_timer_isr_epilogue(TIMER_NUM)

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -1,19 +0,0 @@
-#
-# Set upload_command
-#
-#  Windows: bossac.exe
-#  Other: leave unchanged
-#
-import pioutil
-if pioutil.is_pio_build():
-	import platform
-	current_OS = platform.system()
-
-	if current_OS == 'Windows':
-
-		Import("env")
-
-		# Use bossac.exe on Windows
-		env.Replace(
-			UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
-		)

Marlin/src/HAL/DUE/usb/arduino_due_x.h

@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**
@@ -71,7 +71,7 @@
 /* ------------------------------------------------------------------------ */
 
 /**
- * \page arduino_due_x_board_info "Arduino Due/X - Board information"
+ * \page arduino_due_x_board_info "Arduino Due/X - Board informations"
  * This page lists several definition related to the board description.
  *
  */
@@ -93,5 +93,5 @@
 #define USB_VBOF_GPIO               (PIO_PB10_IDX)
 #define USB_VBOF_FLAGS              (PIO_PERIPH_A | PIO_DEFAULT)
 /*! Active level of the USB_VBOF output pin. */
-#define USB_VBOF_ACTIVE_STATE       LOW
+#define USB_VBOF_ACTIVE_LEVEL       LOW
 /* ------------------------------------------------------------------------ */

Marlin/src/HAL/DUE/usb/compiler.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H
@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-# undef __always_inline
+#	undef __always_inline
 #endif
-# define __always_inline   inline __attribute__((__always_inline__))
+#	define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-# define __always_inline   _Pragma("inline=forced")
+#	define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-# define __no_inline   __attribute__((noinline))
+#   define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-# define __no_inline   __attribute__((__noinline__))
+#	define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-# define __no_inline   _Pragma("inline=never")
+#	define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-  {\
-    if (!(expr)) while (true);\
-  }
+	{\
+		if (!(expr)) while (true);\
+	}
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1UL << 31)) ?  0 : \
-                                ((u) & (1UL << 30)) ?  1 : \
-                                ((u) & (1UL << 29)) ?  2 : \
-                                ((u) & (1UL << 28)) ?  3 : \
-                                ((u) & (1UL << 27)) ?  4 : \
-                                ((u) & (1UL << 26)) ?  5 : \
-                                ((u) & (1UL << 25)) ?  6 : \
-                                ((u) & (1UL << 24)) ?  7 : \
-                                ((u) & (1UL << 23)) ?  8 : \
-                                ((u) & (1UL << 22)) ?  9 : \
-                                ((u) & (1UL << 21)) ? 10 : \
-                                ((u) & (1UL << 20)) ? 11 : \
-                                ((u) & (1UL << 19)) ? 12 : \
-                                ((u) & (1UL << 18)) ? 13 : \
-                                ((u) & (1UL << 17)) ? 14 : \
-                                ((u) & (1UL << 16)) ? 15 : \
-                                ((u) & (1UL << 15)) ? 16 : \
-                                ((u) & (1UL << 14)) ? 17 : \
-                                ((u) & (1UL << 13)) ? 18 : \
-                                ((u) & (1UL << 12)) ? 19 : \
-                                ((u) & (1UL << 11)) ? 20 : \
-                                ((u) & (1UL << 10)) ? 21 : \
-                                ((u) & (1UL <<  9)) ? 22 : \
-                                ((u) & (1UL <<  8)) ? 23 : \
-                                ((u) & (1UL <<  7)) ? 24 : \
-                                ((u) & (1UL <<  6)) ? 25 : \
-                                ((u) & (1UL <<  5)) ? 26 : \
-                                ((u) & (1UL <<  4)) ? 27 : \
-                                ((u) & (1UL <<  3)) ? 28 : \
-                                ((u) & (1UL <<  2)) ? 29 : \
-                                ((u) & (1UL <<  1)) ? 30 : \
+                                ((u) & (1ul << 31)) ?  0 : \
+                                ((u) & (1ul << 30)) ?  1 : \
+                                ((u) & (1ul << 29)) ?  2 : \
+                                ((u) & (1ul << 28)) ?  3 : \
+                                ((u) & (1ul << 27)) ?  4 : \
+                                ((u) & (1ul << 26)) ?  5 : \
+                                ((u) & (1ul << 25)) ?  6 : \
+                                ((u) & (1ul << 24)) ?  7 : \
+                                ((u) & (1ul << 23)) ?  8 : \
+                                ((u) & (1ul << 22)) ?  9 : \
+                                ((u) & (1ul << 21)) ? 10 : \
+                                ((u) & (1ul << 20)) ? 11 : \
+                                ((u) & (1ul << 19)) ? 12 : \
+                                ((u) & (1ul << 18)) ? 13 : \
+                                ((u) & (1ul << 17)) ? 14 : \
+                                ((u) & (1ul << 16)) ? 15 : \
+                                ((u) & (1ul << 15)) ? 16 : \
+                                ((u) & (1ul << 14)) ? 17 : \
+                                ((u) & (1ul << 13)) ? 18 : \
+                                ((u) & (1ul << 12)) ? 19 : \
+                                ((u) & (1ul << 11)) ? 20 : \
+                                ((u) & (1ul << 10)) ? 21 : \
+                                ((u) & (1ul <<  9)) ? 22 : \
+                                ((u) & (1ul <<  8)) ? 23 : \
+                                ((u) & (1ul <<  7)) ? 24 : \
+                                ((u) & (1ul <<  6)) ? 25 : \
+                                ((u) & (1ul <<  5)) ? 26 : \
+                                ((u) & (1ul <<  4)) ? 27 : \
+                                ((u) & (1ul <<  3)) ? 28 : \
+                                ((u) & (1ul <<  2)) ? 29 : \
+                                ((u) & (1ul <<  1)) ? 30 : \
                                 31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
-                                (u) & (1UL <<  1) ?  1 : \
-                                (u) & (1UL <<  2) ?  2 : \
-                                (u) & (1UL <<  3) ?  3 : \
-                                (u) & (1UL <<  4) ?  4 : \
-                                (u) & (1UL <<  5) ?  5 : \
-                                (u) & (1UL <<  6) ?  6 : \
-                                (u) & (1UL <<  7) ?  7 : \
-                                (u) & (1UL <<  8) ?  8 : \
-                                (u) & (1UL <<  9) ?  9 : \
-                                (u) & (1UL << 10) ? 10 : \
-                                (u) & (1UL << 11) ? 11 : \
-                                (u) & (1UL << 12) ? 12 : \
-                                (u) & (1UL << 13) ? 13 : \
-                                (u) & (1UL << 14) ? 14 : \
-                                (u) & (1UL << 15) ? 15 : \
-                                (u) & (1UL << 16) ? 16 : \
-                                (u) & (1UL << 17) ? 17 : \
-                                (u) & (1UL << 18) ? 18 : \
-                                (u) & (1UL << 19) ? 19 : \
-                                (u) & (1UL << 20) ? 20 : \
-                                (u) & (1UL << 21) ? 21 : \
-                                (u) & (1UL << 22) ? 22 : \
-                                (u) & (1UL << 23) ? 23 : \
-                                (u) & (1UL << 24) ? 24 : \
-                                (u) & (1UL << 25) ? 25 : \
-                                (u) & (1UL << 26) ? 26 : \
-                                (u) & (1UL << 27) ? 27 : \
-                                (u) & (1UL << 28) ? 28 : \
-                                (u) & (1UL << 29) ? 29 : \
-                                (u) & (1UL << 30) ? 30 : \
-                                (u) & (1UL << 31) ? 31 : \
+#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
+                                (u) & (1ul <<  1) ?  1 : \
+                                (u) & (1ul <<  2) ?  2 : \
+                                (u) & (1ul <<  3) ?  3 : \
+                                (u) & (1ul <<  4) ?  4 : \
+                                (u) & (1ul <<  5) ?  5 : \
+                                (u) & (1ul <<  6) ?  6 : \
+                                (u) & (1ul <<  7) ?  7 : \
+                                (u) & (1ul <<  8) ?  8 : \
+                                (u) & (1ul <<  9) ?  9 : \
+                                (u) & (1ul << 10) ? 10 : \
+                                (u) & (1ul << 11) ? 11 : \
+                                (u) & (1ul << 12) ? 12 : \
+                                (u) & (1ul << 13) ? 13 : \
+                                (u) & (1ul << 14) ? 14 : \
+                                (u) & (1ul << 15) ? 15 : \
+                                (u) & (1ul << 16) ? 16 : \
+                                (u) & (1ul << 17) ? 17 : \
+                                (u) & (1ul << 18) ? 18 : \
+                                (u) & (1ul << 19) ? 19 : \
+                                (u) & (1ul << 20) ? 20 : \
+                                (u) & (1ul << 21) ? 21 : \
+                                (u) & (1ul << 22) ? 22 : \
+                                (u) & (1ul << 23) ? 23 : \
+                                (u) & (1ul << 24) ? 24 : \
+                                (u) & (1ul << 25) ? 25 : \
+                                (u) & (1ul << 26) ? 26 : \
+                                (u) & (1ul << 27) ? 27 : \
+                                (u) & (1ul << 28) ? 28 : \
+                                (u) & (1ul << 29) ? 29 : \
+                                (u) & (1ul << 30) ? 30 : \
+                                (u) & (1ul << 31) ? 31 : \
                                 32)
 #endif
 #endif
@@ -1106,16 +1106,17 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-  union
-  {
-    uint32_t u32;
-    uint8_t u8[8];
-  }long_addr;
-  uint8_t index;
-  for (index = 0; index < 4; index++) {
-    long_addr.u8[index] = *data++;
-  }
-  return long_addr.u32;
+	union
+	{
+		uint32_t u32;
+		uint8_t u8[8];
+	}long_addr;
+	uint8_t index;
+	for (index = 0; index < 4; index++)
+	{
+		long_addr.u8[index] = *data++;
+	}
+	return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/DUE/usb/conf_access.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_

Marlin/src/HAL/DUE/usb/conf_clock.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_
@@ -78,6 +78,10 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED
 
+#if MB(ARCHIM1)
+  #define USB_DEVICE_FULL_SPEED
+#endif
+
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
   #if (UC3A3||UC3A4)

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/ctrl_access.h

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 

Marlin/src/HAL/DUE/usb/genclk.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_GENCLK_H_INCLUDED

Marlin/src/HAL/DUE/usb/mrepeat.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _MREPEAT_H_

Marlin/src/HAL/DUE/usb/osc.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_OSC_H_INCLUDED

Marlin/src/HAL/DUE/usb/pll.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_PLL_H_INCLUDED