Update from devel

Turn on multiple probing, off power save recovery, bump version

.editorconfig

@@ -0,0 +1,19 @@
+# editorconfig.org
+root = true
+
+[{*.patch,syntax_test_*}]
+trim_trailing_whitespace = false
+
+[{*.c,*.cpp,*.h}]
+charset = utf-8
+
+[{*.c,*.cpp,*.h,Makefile}]
+trim_trailing_whitespace = true
+insert_final_newline = true
+end_of_line = lf
+indent_style = space
+indent_size = 2
+
+[{*.py,*.conf,*.sublime-project}]
+indent_style = tab
+indent_size = 4

.gitattributes

@@ -17,4 +17,3 @@
 *.png binary
 *.jpg binary
 *.fon binary
-

.github/FUNDING.yml

@@ -0,0 +1 @@
+custom: http://www.thinkyhead.com/donate-to-marlin

.github/code_of_conduct.md

@@ -0,0 +1,46 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
+
+## Our Standards
+
+Examples of behavior that contributes to creating a positive environment include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or electronic address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a professional setting
+
+## Our Responsibilities
+
+Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
+
+Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
+
+## Scope
+
+This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at [marlinfirmware@github.com](mailto:marlinfirmware@github.com). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
+
+Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [https://contributor-covenant.org/version/1/4][version]
+
+[homepage]: https://contributor-covenant.org
+[version]: https://contributor-covenant.org/version/1/4/

.github/contributing.md

@@ -0,0 +1,144 @@
+# Contributing to Marlin
+
+Thanks for your interest in contributing to Marlin Firmware!
+
+The following is a set of guidelines for contributing to Marlin, hosted by the [MarlinFirmware Organization](https://github.com/MarlinFirmware) on GitHub. These are mostly guidelines, not rules. Use your best judgment, and feel free to propose changes to this document in a Pull Request.
+
+#### Table Of Contents
+
+[Code of Conduct](#code-of-conduct)
+
+[I don't want to read this whole thing, I just have a question!!!](#i-dont-want-to-read-this-whole-thing-i-just-have-a-question)
+
+[How Can I Contribute?](#how-can-i-contribute)
+  * [Reporting Bugs](#reporting-bugs)
+  * [Suggesting Features or Changes](#suggesting-features-or-changes)
+  * [Your First Code Contribution](#your-first-code-contribution)
+  * [Pull Requests](#pull-requests)
+
+[Styleguides](#styleguides)
+  * [Git Commit Messages](#git-commit-messages)
+  * [C++ Coding Standards](#c++-coding-standards)
+  * [Documentation Styleguide](#documentation)
+
+[Additional Notes](#additional-notes)
+  * [Issue and Pull Request Labels](#issue-and-pull-request-labels)
+
+## Code of Conduct
+
+This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [marlinfirmware@github.com](mailto:marlinfirmware@github.com).
+
+## I don't want to read this whole thing I just have a question!!!
+
+> **Note:** Please don't file an issue to ask a question. You'll get faster results by using the resources below.
+
+We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
+
+* [Marlin RepRap forum](http://forums.reprap.org/list.php?415)
+* [MarlinFirmware on Facebook](https://www.facebook.com/groups/1049718498464482/)
+
+If chat is more your speed, you can join the MarlinFirmware Slack team:
+
+* Join the Marlin Slack Team
+  * To obtain group access, please [send a request](http://www.thinkyhead.com/contact/9) to @thinkyhead.
+  * Even though Slack is a chat service, sometimes it takes several hours for community members to respond — please be patient!
+  * Use the `#general` channel for general questions or discussion about Marlin.
+  * Other channels exist for certain topics. Check the channel list.
+
+## How Can I Contribute?
+
+### Reporting Bugs
+
+This section guides you through submitting a Bug Report for Marlin. Following these guidelines helps maintainers and the community understand your report, reproduce the behavior, and find related reports.
+
+Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](issue_template.md), the information it asks for helps us resolve issues faster.
+
+> **Note:** Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
+
+#### How Do I Submit A (Good) Bug Report?
+
+Bugs are tracked as [GitHub issues](https://guides.github.com/features/issues/). Use the New Issue button to create an issue and provide the following information by filling in [the template](issue_template.md).
+
+Explain the problem and include additional details to help maintainers reproduce the problem:
+
+* **Use a clear and descriptive title** for the issue to identify the problem.
+* **Describe the exact steps which reproduce the problem** in as many details as possible. For example, start by explaining how you started Marlin, e.g. which command exactly you used in the terminal, or how you started Marlin otherwise. When listing steps, **don't just say what you did, but explain how you did it**. For example, if you moved the cursor to the end of a line, explain if you used the mouse, or a keyboard shortcut or an Marlin command, and if so which one?
+* **Provide specific examples to demonstrate the steps**. Include links to files or GitHub projects, or copy/pasteable snippets, which you use in those examples. If you're providing snippets or log output in the issue, use [Markdown code blocks](https://help.github.com/articles/markdown-basics/#multiple-lines).
+* **Describe the behavior you observed after following the steps** and point out what exactly is the problem with that behavior.
+* **Explain which behavior you expected to see instead and why.**
+* **Include detailed log output** especially for probing and leveling. See below for usage of `DEBUG_LEVELING_FEATURE`.
+* **Include screenshots, links to videos, etc.** which clearly demonstrate the problem.
+* **Include G-code** (if relevant) that reliably causes the problem to show itself.
+* **If the problem wasn't triggered by a specific action**, describe what you were doing before the problem happened and share more information using the guidelines below.
+
+Provide more context:
+
+* **Can you reproduce the problem with a minimum of options enabled?**
+* **Did the problem start happening recently** (e.g. after updating to a new version of Marlin) or was this always a problem?
+* If the problem started happening recently, **can you reproduce the problem in an older version of Marlin?** What's the most recent version in which the problem doesn't happen? You can download older versions of Marlin from [the releases page](https://github.com/MarlinFirmware/Marlin/releases).
+* **Can you reliably reproduce the issue?** If not, provide details about how often the problem happens and under which conditions it normally happens.
+
+Include details about your configuration and environment:
+
+* **Which version of Marlin are you using?** Marlin's exact version and build date can be seen in the startup message when a host connects to Marlin, or in the LCD Info menu (if enabled).
+* **What kind of 3D Printer and electronics are you using**?
+* **What kind of add-ons (probe, filament sensor) do you have**?
+* **Include your Configuration files.** Make a ZIP file containing `Configuration.h` and `Configuration_adv.h` and drop it on your reply.
+
+### Suggesting Features or Changes
+
+This section guides you through submitting a suggestion for Marlin, including completely new features and minor improvements to existing functionality. Following these guidelines helps maintainers and the community understand your suggestion and find related suggestions.
+
+Before creating a suggestion, please check [this list](#before-submitting-a-suggestion) as you might find out that you don't need to create one. When you are creating an enhancement suggestion, please [include as many details as possible](#how-do-i-submit-a-good-enhancement-suggestion). Fill in [the template](issue_template.md), including the steps that you imagine you would take if the feature you're requesting existed.
+
+#### Before Submitting a Feature Request
+
+* **Check the [Marlin website](http://marlinfw.org/)** for tips — you might discover that the feature is already included. Most importantly, check if you're using [the latest version of Marlin](https://github.com/MarlinFirmware/Marlin/releases) and if you can get the desired behavior by changing [Marlin's config settings](http://marlinfw.org/docs/configuration/configuration.html).
+* **Perform a [cursory search](https://github.com/MarlinFirmware/Marlin/issues?q=is%3Aissue)** to see if the enhancement has already been suggested. If it has, add a comment to the existing issue instead of opening a new one.
+
+#### How Do I Submit A (Good) Feature Request?
+
+Feature Requests are tracked as [GitHub issues](https://guides.github.com/features/issues/). Please follow these guidelines in your request:
+
+* **Use a clear and descriptive title** for the issue to identify the suggestion.
+* **Provide a step-by-step description of the requested feature** in as much detail as possible.
+* **Provide specific examples to demonstrate the steps**.
+* **Describe the current behavior** and **explain which behavior you expected to see instead** and why.
+* **Include screenshots and links to videos** which demonstrate the feature or point out the part of Marlin to which the request is related.
+* **Explain why this feature would be useful** to most Marlin users.
+* **Name other firmwares that have this feature, if any.**
+
+### Your First Code Contribution
+
+Unsure where to begin contributing to Marlin? You can start by looking through these `good-first-issue` and `help-wanted` issues:
+
+* [Beginner issues][good-first-issue] - issues which should only require a few lines of code, and a test or two.
+* [Help Wanted issues][help-wanted] - issues which should be a bit more involved than `beginner` issues.
+
+### Pull Requests
+
+Pull Requests should always be targeted to working branches (e.g., `bugfix-1.1.x` and/or `bugfix-2.0.x`) and never to release branches (e.g., `1.1.x`). If this is your first Pull Request, please read our [Guide to Pull Requests](http://marlinfw.org/docs/development/getting_started_pull_requests.html) and Github's [Pull Request](https://help.github.com/articles/creating-a-pull-request/) documentation.
+
+* Fill in [the required template](pull_request_template.md).
+* Don't include issue numbers in the PR title.
+* Include pictures, diagrams, and links to videos in your Pull Request to demonstrate your changes, if needed.
+* Follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website.
+* Document new code with clear and concise comments.
+* End all files with a newline.
+
+## Styleguides
+
+### Git Commit Messages
+
+* Use the present tense ("Add feature" not "Added feature").
+* Use the imperative mood ("Move cursor to..." not "Moves cursor to...").
+* Limit the first line to 72 characters or fewer.
+* Reference issues and Pull Requests liberally after the first line.
+
+### C++ Coding Standards
+
+* Please read and follow the [Coding Standards](http://marlinfw.org/docs/development/coding_standards.html) posted on our website. Failure to follow these guidelines will delay evaluation and acceptance of Pull Requests.
+
+### Documentation
+
+* Guidelines for documentation are still under development. In-general, be clear, concise, and to-the-point.

.github/issue_template.md

@@ -1,36 +1,31 @@
-Thank you for submitting your feedback to the Marlin project.
-Please use one of the templates below to fill out this box.
+<!--
 
-------------------------------------------------------------
-### Feature Request
-Please put [FR] in the issue title: `[FR] Add-on that goes 'ping'`
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-------------------------------------------------------------
-### Compile Error
-When I compile with `FEATURE_X` I get an error:
-```
-Paste_the_error_text_here
-```
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
 
-------------------------------------------------------------
-### Bug Report
-- Description: ---
-- Expected behaviour: ---
-- Actual behaviour: ---
-- Steps to reproduce:
-  - Do this
-  - Do that
+Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
 
-Attach a ZIP of `Configuration.h` and `Configuration_adv.h` by dropping here.
+-->
 
-------------------------------------------------------------
-### Bug Report Tips
-- When troubleshooting, use `M502` followed by `M500` to reset EEPROM to defaults.
-- Use `DEBUG_LEVELING_FEATURE` with `M111 S247` for detailed logging of homing/leveling.
-- Format text with: **bold**, _italic_, `code`.
-- Format C++ with three backticks, plus "cpp":
-```cpp
-void my_function(bool do_it) {
-  // Hold this spot
-}
-```
+### Description
+
+<!-- Description of the bug or requested feature -->
+
+### Steps to Reproduce
+
+<!-- If this is a Bug Report, please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.

.github/pull_request_template.md

@@ -0,0 +1,19 @@
+### Requirements
+
+* Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.
+
+### Description
+
+<!--
+
+We must be able to understand your proposed change from this description. If we can't understand what the code will do from this description, the Pull Request may be closed at the maintainers' discretion. Keep in mind that the maintainer reviewing this PR may not be familiar with or have worked with the code recently, so please walk us through the concepts.
+
+-->
+
+### Benefits
+
+<!-- What does this fix or improve? -->
+
+### Related Issues
+
+<!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.gitignore

@@ -1,9 +1,9 @@
 #
 # Marlin 3D Printer Firmware
-# Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 #
 # Based on Sprinter and grbl.
-# Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+# Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 #
 # This program is free software: you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -29,7 +29,6 @@ _Version.h
 applet/
 *.DS_Store
 
-
 #
 # Misc
 #
@@ -118,24 +117,70 @@ tags
 
 # PlatformIO files/dirs
 .pio*
-lib/readme.txt
+.pioenvs
+.piolibdeps
+.clang_complete
+.gcc-flags.json
+/lib/
+
+# Workaround for Deviot+platformio quirks
+Marlin/lib
+Marlin/platformio.ini
+Marlin/*/platformio.ini
+Marlin/*/*/platformio.ini
+Marlin/*/*/*/platformio.ini
+Marlin/*/*/*/*/platformio.ini
+Marlin/.travis.yml
+Marlin/*/.travis.yml
+Marlin/*/*/.travis.yml
+Marlin/*/*/*/.travis.yml
+Marlin/*/*/*/*/.travis.yml
+Marlin/.gitignore
+Marlin/*/.gitignore
+Marlin/*/*/.gitignore
+Marlin/*/*/*/.gitignore
+Marlin/*/*/*/*/.gitignore
+Marlin/readme.txt
+Marlin/*/readme.txt
+Marlin/*/*/readme.txt
+Marlin/*/*/*/readme.txt
+Marlin/*/*/*/*/readme.txt
+
+# Secure Credentials
+Configuration_Secure.h
 
 #Visual Studio
 *.sln
 *.vcxproj
+*.vcxproj.user
 *.vcxproj.filters
-Marlin/Release/
-Marlin/Debug/
-Marlin/__vm/
-Marlin/.vs/
+Release/
+Debug/
+__vm/
+.vs/
+vc-fileutils.settings
 
-#VScode
+#Visual Studio Code
 .vscode
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/*.db
 
 #cmake
 CMakeLists.txt
-Marlin/CMakeLists.txt
+src/CMakeLists.txt
 CMakeListsPrivate.txt
 
 #CLion
 cmake-build-*
+
+#Eclipse
+.project
+.cproject
+.pydevproject
+.settings
+.classpath
+
+#Python
+__pycache__

.travis.yml

@@ -1,11 +1,60 @@
-dist: trusty
-sudo: true
-  #
-language: c
-  #
+dist: bionic
+sudo: false
+
+language: python
+python:
+  - "3.7"
+
 notifications:
   email: false
-  #
+
+env:
+  # Base Environments
+  - TEST_PLATFORM="DUE"
+  - TEST_PLATFORM="esp32"
+  - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="megaatmega2560"
+  - TEST_PLATFORM="teensy31"
+  - TEST_PLATFORM="teensy35"
+
+  # Extended AVR Environments
+  - TEST_PLATFORM="FYSETC_F6_13"
+  - TEST_PLATFORM="megaatmega1280"
+  - TEST_PLATFORM="rambo"
+  - TEST_PLATFORM="sanguino_atmega1284p"
+  - TEST_PLATFORM="sanguino_atmega644p"
+
+  # Extended STM32 Environments
+  - TEST_PLATFORM="STM32F103RC_bigtree"
+  - TEST_PLATFORM="STM32F103RC_bigtree_USB"
+  - TEST_PLATFORM="STM32F103RE_bigtree"
+  - TEST_PLATFORM="STM32F103RE_bigtree_USB"
+  - TEST_PLATFORM="STM32F103RC_fysetc"
+  - TEST_PLATFORM="jgaurora_a5s_a1"
+  - TEST_PLATFORM="STM32F103VE_longer"
+  - TEST_PLATFORM="STM32F407VE_black"
+  - TEST_PLATFORM="BIGTREE_SKR_PRO"
+  - TEST_PLATFORM="mks_robin"
+  - TEST_PLATFORM="ARMED"
+
+  # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
+  #- TEST_PLATFORM="STM32F4"
+  #- TEST_PLATFORM="STM32F7"
+
+  # Put lengthy tests last
+  - TEST_PLATFORM="LPC1768"
+  - TEST_PLATFORM="LPC1769"
+
+  # Non-working environment tests
+  #- TEST_PLATFORM="BIGTREE_BTT002" this board isn't released yet. we need pinout to be sure about what we do
+  #- TEST_PLATFORM="at90usb1286_cdc"
+  #- TEST_PLATFORM="at90usb1286_dfu"
+  #- TEST_PLATFORM="STM32F103CB_malyan"
+  #- TEST_PLATFORM="mks_robin_lite"
+  #- TEST_PLATFORM="mks_robin_mini"
+  #- TEST_PLATFORM="mks_robin_nano"
+  #- TEST_PLATFORM="SAMD51_grandcentral_m4"
+
 before_install:
   #
   # Fetch the tag information for the current branch
@@ -13,342 +62,23 @@ before_install:
   #
   # Publish the buildroot script folder
   - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
-  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
-  #
-  # Start fb X server
-  - "/sbin/start-stop-daemon --start --quiet --pidfile /tmp/custom_xvfb_1.pid --make-pidfile --background --exec /usr/bin/Xvfb -- :1 -ac -screen 0 1280x1024x16"
-  - sleep 3
-  - export DISPLAY=:1.0
-  #
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
+  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
+
 install:
-  #
-  # Install arduino 1.6.10
-  - wget http://downloads-02.arduino.cc/arduino-1.6.10-linux64.tar.xz
-  - tar xf arduino-1.6.10-linux64.tar.xz
-  - sudo mv arduino-1.6.10 /usr/local/share/arduino
-  - ln -s /usr/local/share/arduino/arduino ${TRAVIS_BUILD_DIR}/buildroot/bin/arduino
-  #
-  # Install: LiquidCrystal_I2C library
-  - git clone https://github.com/kiyoshigawa/LiquidCrystal_I2C.git
-  - mv LiquidCrystal_I2C/LiquidCrystal_I2C /usr/local/share/arduino/libraries/LiquidCrystal_I2C
-  #
-  # Install: LiquidTWI2 library
-  - git clone https://github.com/lincomatic/LiquidTWI2.git
-  - sudo mv LiquidTWI2 /usr/local/share/arduino/libraries/LiquidTWI2
-  #
-  # Install: Monochrome Graphics Library for LCDs and OLEDs
-  - git clone https://github.com/olikraus/U8glib_Arduino.git
-  - sudo mv U8glib_Arduino /usr/local/share/arduino/libraries/U8glib
-  #
-  # Install: L6470 Stepper Motor Driver library
-  # - git clone https://github.com/ameyer/Arduino-L6470.git
-  # - sudo mv Arduino-L6470/L6470 /usr/local/share/arduino/libraries/L6470
-  #
-  # Install: TMC26X Stepper Motor Controller library
-  # - git clone https://github.com/trinamic/TMC26XStepper.git
-  # - sudo mv TMC26XStepper /usr/local/share/arduino/libraries/TMC26XStepper
-  #
-  # Install: TMC2130 Stepper Motor Controller library
-  - git clone https://github.com/teemuatlut/TMC2130Stepper.git
-  - sudo mv TMC2130Stepper /usr/local/share/arduino/libraries/TMC2130Stepper
-  #
-  # Install: Adafruit Neopixel library
-  - git clone https://github.com/adafruit/Adafruit_NeoPixel.git
-  - sudo mv Adafruit_NeoPixel /usr/local/share/arduino/libraries/Adafruit_NeoPixel
-  #
+  #- pip install -U platformio
+  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+
 before_script:
+  # Update PlatformIO packages
+  - platformio update
   #
   # Change current working directory to the build dir
   - cd ${TRAVIS_BUILD_DIR}
   #
   # Generate custom version include
-  - generate_version_header_for_marlin ${TRAVIS_BUILD_DIR}/Marlin
-  - cat ${TRAVIS_BUILD_DIR}/Marlin/_Version.h
+  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/
+  - cat ${TRAVIS_BUILD_DIR}/Marlin/Version.h
   #
 script:
-  #
-  # Backup Configuration.h, Configuration_adv.h, and pins_RAMPS.h
-  #
-  - cp Marlin/Configuration.h Marlin/Configuration.h.backup
-  - cp Marlin/Configuration_adv.h Marlin/Configuration_adv.h.backup
-  - cp Marlin/pins_RAMPS.h Marlin/pins_RAMPS.h.backup
-  #
-  # Build with the default configurations
-  #
-  - build_marlin
-  #
-  # Test 2 extruders (one MAX6675) and heated bed on basic RAMPS 1.4
-  # Test a "Fix Mounted" Probe with Safe Homing, some arc options,
-  # linear bed leveling, M48, leveling debug, and firmware retraction.
-  #
-  - opt_set MOTHERBOARD BOARD_RAMPS_14_EEB
-  - opt_set EXTRUDERS 2
-  - opt_set TEMP_SENSOR_0 -2
-  - opt_set TEMP_SENSOR_1 1
-  - opt_set TEMP_SENSOR_BED 1
-  - opt_enable PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING ARC_P_CIRCLES CNC_WORKSPACE_PLANES
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS
-  - opt_enable BLINKM PCA9632 RGB_LED NEOPIXEL_RGBW_LED
-  - opt_enable AUTO_BED_LEVELING_LINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE
-  - opt_enable_adv FWRETRACT MAX7219_DEBUG
-  - opt_set ABL_GRID_POINTS_X 16
-  - opt_set ABL_GRID_POINTS_Y 16
-  - opt_set_adv FANMUX0_PIN 53
-  - build_marlin
-  #
-  # Test a simple build of AUTO_BED_LEVELING_UBL
-  #
-  - restore_configs
-  - opt_enable AUTO_BED_LEVELING_UBL UBL_G26_MESH_EDITING ENABLE_LEVELING_FADE_HEIGHT FIX_MOUNTED_PROBE EEPROM_SETTINGS G3D_PANEL
-  - opt_enable_adv CUSTOM_USER_MENUS I2C_POSITION_ENCODERS BABYSTEPPING
-  - build_marlin
-  #
-  # Test a Sled Z Probe
-  # ...with AUTO_BED_LEVELING_LINEAR, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, and EEPROM_CHITCHAT
-  #
-  - restore_configs
-  - opt_enable Z_PROBE_SLED AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
-  - build_marlin
-  #
-  # Test a Servo Probe
-  # ...with AUTO_BED_LEVELING_3POINT, DEBUG_LEVELING_FEATURE, EEPROM_SETTINGS, EEPROM_CHITCHAT, EXTENDED_CAPABILITIES_REPORT, and AUTO_REPORT_TEMPERATURES
-  #
-  - restore_configs
-  - opt_enable NUM_SERVOS Z_ENDSTOP_SERVO_NR Z_SERVO_ANGLES DEACTIVATE_SERVOS_AFTER_MOVE
-  - opt_set NUM_SERVOS 1
-  - opt_enable AUTO_BED_LEVELING_3POINT DEBUG_LEVELING_FEATURE EEPROM_SETTINGS EEPROM_CHITCHAT
-  - opt_enable_adv EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES AUTOTEMP G38_PROBE_TARGET
-  - build_marlin
-  #
-  # Test MESH_BED_LEVELING feature, with LCD
-  #
-  - restore_configs
-  - opt_enable MESH_BED_LEVELING MESH_G28_REST_ORIGIN LCD_BED_LEVELING ULTIMAKERCONTROLLER
-  - build_marlin
-  #
-  # Test PROBE_MANUALLY feature, with LCD support,
-  #      EEPROM_SETTINGS, EEPROM_CHITCHAT, M100_FREE_MEMORY_WATCHER,
-  #      INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_MINIRAMBO
-  - opt_enable PROBE_MANUALLY AUTO_BED_LEVELING_BILINEAR LCD_BED_LEVELING ULTIMAKERCONTROLLER
-  - opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT
-  - build_marlin
-  #
-  # Test 5 extruders on AZTEEG_X3_PRO (can use any board with >=5 extruders defined)
-  # Include a test for LIN_ADVANCE here also
-  #
-  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
-  - opt_set EXTRUDERS 5
-  - opt_set TEMP_SENSOR_1 1
-  - opt_set TEMP_SENSOR_2 5
-  - opt_set TEMP_SENSOR_3 20
-  - opt_set TEMP_SENSOR_4 999
-  - opt_set TEMP_SENSOR_BED 1
-  - opt_enable_adv LIN_ADVANCE
-  - build_marlin
-  #
-  # Mixing Extruder with 5 steppers
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_AZTEEG_X3_PRO
-  - opt_enable MIXING_EXTRUDER
-  - opt_set MIXING_STEPPERS 5
-  - build_marlin
-  #
-  # Test DUAL_X_CARRIAGE
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_RUMBA
-  - opt_set EXTRUDERS 2
-  - opt_set TEMP_SENSOR_1 1
-  - opt_enable USE_XMAX_PLUG
-  - opt_enable_adv DUAL_X_CARRIAGE
-  - build_marlin
-  #
-  # Test SPEAKER with BOARD_BQ_ZUM_MEGA_3D and BQ_LCD_SMART_CONTROLLER
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_BQ_ZUM_MEGA_3D
-  - opt_set LCD_FEEDBACK_FREQUENCY_DURATION_MS 10
-  - opt_set LCD_FEEDBACK_FREQUENCY_HZ 100
-  - opt_enable BQ_LCD_SMART_CONTROLLER SPEAKER
-  #
-  # Test SWITCHING_EXTRUDER
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_RUMBA
-  - opt_set EXTRUDERS 2
-  - opt_enable NUM_SERVOS
-  - opt_set NUM_SERVOS 1
-  - opt_set TEMP_SENSOR_1 1
-  - opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER
-  - build_marlin
-  #
-  # Test MINIRAMBO for PWM_MOTOR_CURRENT
-  #      ULTIMAKERCONTROLLER, FILAMENT_LCD_DISPLAY, FILAMENT_WIDTH_SENSOR,
-  #      PRINTCOUNTER, NOZZLE_PARK_FEATURE, NOZZLE_CLEAN_FEATURE, PCA9632,
-  #      Z_DUAL_STEPPER_DRIVERS, Z_DUAL_ENDSTOPS, BEZIER_CURVE_SUPPORT, EXPERIMENTAL_I2CBUS,
-  #      FILAMENT_CHANGE_FEATURE, PARK_HEAD_ON_PAUSE, LCD_INFO_MENU,
-  #
-  - restore_configs
-  - opt_enable ULTIMAKERCONTROLLER FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR SDSUPPORT
-  - opt_enable PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE PCA9632
-  - opt_enable_adv Z_DUAL_STEPPER_DRIVERS Z_DUAL_ENDSTOPS BEZIER_CURVE_SUPPORT EXPERIMENTAL_I2CBUS
-  - opt_set_adv I2C_SLAVE_ADDRESS 63
-  - opt_enable_adv FILAMENT_CHANGE_FEATURE PARK_HEAD_ON_PAUSE LCD_INFO_MENU
-  - pins_set RAMPS X_MAX_PIN -1
-  - opt_set_adv Z2_MAX_PIN 2
-  - build_marlin
-  #
-  # Enable COREXY
-  #
-  - restore_configs
-  - opt_enable COREXY
-  - build_marlin
-  #
-  # Enable COREYX (swapped)
-  #
-  #- restore_configs
-  #- opt_enable COREYX
-  #- build_marlin
-  #
-  #
-  ######## Other Standard LCD/Panels ##############
-  #
-  # ULTRA_LCD
-  #
-  - restore_configs
-  - opt_enable ULTRA_LCD
-  - build_marlin
-  #
-  # DOGLCD
-  #
-  - restore_configs
-  - opt_enable DOGLCD
-  - build_marlin
-  #
-  # MAKRPANEL
-  # Needs to use Melzi and Sanguino hardware
-  #
-  #- restore_configs
-  #- opt_enable MAKRPANEL
-  #- build_marlin
-  #
-  # REPRAP_DISCOUNT_SMART_CONTROLLER, SDSUPPORT, BABYSTEPPING, RIGIDBOARD_V2, and DAC_MOTOR_CURRENT_DEFAULT
-  #
-  - restore_configs
-  - opt_set MOTHERBOARD BOARD_RIGIDBOARD_V2
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT BABYSTEPPING DAC_MOTOR_CURRENT_DEFAULT
-  - build_marlin
-  #
-  # G3D_PANEL with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
-  #
-  - restore_configs
-  - opt_enable G3D_PANEL SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
-  - opt_set_adv SDSORT_GCODE true
-  - opt_set_adv SDSORT_USES_RAM true
-  - opt_set_adv SDSORT_USES_STACK true
-  - opt_set_adv SDSORT_CACHE_NAMES true
-  - build_marlin
-  #
-  # REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with SDCARD_SORT_ALPHA and STATUS_MESSAGE_SCROLLING
-  #
-  - restore_configs
-  - opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT
-  - opt_enable_adv SDCARD_SORT_ALPHA STATUS_MESSAGE_SCROLLING
-  - build_marlin
-  #
-  # REPRAPWORLD_KEYPAD
-  #
-  # Cant find configuration details to get it to compile
-  #- restore_configs
-  #- opt_enable ULTRA_LCD REPRAPWORLD_KEYPAD REPRAPWORLD_KEYPAD_MOVE_STEP
-  #- build_marlin
-  #
-  # RA_CONTROL_PANEL
-  #
-  - restore_configs
-  - opt_enable RA_CONTROL_PANEL PINS_DEBUGGING
-  - build_marlin
-  #
-  ######## I2C LCD/PANELS ##############
-  #
-  # !!!ATTENTION!!!
-  # Most I2C configurations are failing at the moment because they require
-  # a different Liquid Crystal library "LiquidTWI2".
-  #
-  # LCD_I2C_SAINSMART_YWROBOT
-  #
-  #- restore_configs
-  #- opt_enable LCD_I2C_SAINSMART_YWROBOT
-  #- build_marlin
-  #
-  # LCD_I2C_PANELOLU2
-  #
-  #- restore_configs
-  #- opt_enable LCD_I2C_PANELOLU2
-  #- build_marlin
-  #
-  # LCD_I2C_VIKI
-  #
-  #- restore_configs
-  #- opt_enable LCD_I2C_VIKI
-  #- build_marlin
-  #
-  # LCM1602
-  #
-  - restore_configs
-  - opt_enable LCM1602
-  - build_marlin
-  #
-  #
-  ######## Example Configurations ##############
-  #
-  # BQ Hephestos 2
-  #- restore_configs
-  #- use_example_configs Hephestos_2
-  #- build_marlin
-  #
-  # Delta Config (generic) + ABL bilinear + PROBE_MANUALLY
-  - use_example_configs delta/generic
-  - opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY
-  - build_marlin
-  #
-  # Delta Config (generic) + UBL + ALLEN_KEY + OLED_PANEL_TINYBOY2 + EEPROM_SETTINGS
-  #
-  - use_example_configs delta/generic
-  - opt_disable DISABLE_MIN_ENDSTOPS
-  - opt_enable AUTO_BED_LEVELING_UBL Z_PROBE_ALLEN_KEY EEPROM_SETTINGS EEPROM_CHITCHAT OLED_PANEL_TINYBOY2
-  - build_marlin
-  #
-  # Delta Config (FLSUN AC because it's complex)
-  #
-  - use_example_configs delta/FLSUN/auto_calibrate
-  - build_marlin
-  #
-  # Makibox Config  need to check board type for Teensy++ 2.0
-  #
-  #- use_example_configs makibox
-  #- build_marlin
-  #
-  # SCARA with TMC2130
-  #
-  - use_example_configs SCARA
-  - opt_enable AUTO_BED_LEVELING_BILINEAR FIX_MOUNTED_PROBE USE_ZMIN_PLUG EEPROM_SETTINGS EEPROM_CHITCHAT ULTIMAKERCONTROLLER
-  - opt_enable_adv HAVE_TMC2130 X_IS_TMC2130 Y_IS_TMC2130 Z_IS_TMC2130
-  - opt_enable_adv AUTOMATIC_CURRENT_CONTROL STEALTHCHOP HYBRID_THRESHOLD SENSORLESS_HOMING
-  - build_marlin
-  #
-  # tvrrug Config need to check board type for sanguino atmega644p
-  #
-  #- use_example_configs tvrrug/Round2
-  #- build_marlin
-  #
-  #
-  ######## Board Types #############
-  #
-  # To be added in nightly test branch
-  #
+  - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

LICENSE

@@ -3,7 +3,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -634,7 +634,7 @@ state the exclusion of warranty; and each file should have at least
 the "copyright" line and a pointer to where the full notice is found.
 
     {one line to give the program's name and a brief idea of what it does.}
-    Copyright (C) {year}  {name of author}
+    Copyright (c) {year}  {name of author}
 
     This program is free software: you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
@@ -654,7 +654,7 @@ Also add information on how to contact you by electronic and paper mail.
   If the program does terminal interaction, make it output a short
 notice like this when it starts in an interactive mode:
 
-    {project}  Copyright (C) {year}  {fullname}
+    {project}  Copyright (c) {year}  {fullname}
     This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

Marlin/Conditionals_LCD.h

@@ -1,437 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Conditionals_LCD.h
- * Conditionals that need to be set before Configuration_adv.h or pins.h
- */
-
-#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
-#define CONDITIONALS_LCD_H
-
-  #define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
-
-  #if ENABLED(CARTESIO_UI)
-
-    #define DOGLCD
-    #define ULTIPANEL
-    #define NEWPANEL
-    #define DEFAULT_LCD_CONTRAST 90
-    #define LCD_CONTRAST_MIN 60
-    #define LCD_CONTRAST_MAX 140
-
-  #elif ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
-
-    #define DOGLCD
-    #define ULTIPANEL
-    #define NEWPANEL
-    #define DEFAULT_LCD_CONTRAST 17
-
-  #elif ENABLED(ANET_KEYPAD_LCD)
-
-    #define REPRAPWORLD_KEYPAD
-    #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
-    #define ADC_KEYPAD
-    #define ADC_KEY_NUM 8
-    #define ULTIPANEL
-    // this helps to implement ADC_KEYPAD menus
-    #define ENCODER_STEPS_PER_MENU_ITEM 1
-    #define REVERSE_MENU_DIRECTION
-
-  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
-
-    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-
-  #elif ENABLED(BQ_LCD_SMART_CONTROLLER)
-
-    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
-    #define LONG_FILENAME_HOST_SUPPORT
-
-  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-
-    #define ULTRA_LCD  //general LCD support, also 16x2
-    #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
-    #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
-
-    #if ENABLED(miniVIKI)
-      #define LCD_CONTRAST_MIN  75
-      #define LCD_CONTRAST_MAX 115
-      #define DEFAULT_LCD_CONTRAST 95
-    #elif ENABLED(VIKI2)
-      #define DEFAULT_LCD_CONTRAST 40
-    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-      #define LCD_CONTRAST_MIN  90
-      #define LCD_CONTRAST_MAX 130
-      #define DEFAULT_LCD_CONTRAST 110
-      #define U8GLIB_LM6059_AF
-      #define SD_DETECT_INVERTED
-    #endif
-
-  #elif ENABLED(OLED_PANEL_TINYBOY2)
-
-    #define U8GLIB_SSD1306
-    #define ULTIPANEL
-    #define NEWPANEL
-    #define REVERSE_ENCODER_DIRECTION
-    #define REVERSE_MENU_DIRECTION
-
-  #elif ENABLED(RA_CONTROL_PANEL)
-
-    #define LCD_I2C_TYPE_PCA8574
-    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
-    #define ULTIPANEL
-    #define NEWPANEL
-
-  #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
-
-    #define DOGLCD
-    #define U8GLIB_ST7920
-    #define ULTIPANEL
-    #define NEWPANEL
-
-  #endif
-
-  // Generic support for SSD1306 / SH1106 OLED based LCDs.
-  #if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SH1106)
-    #define ULTRA_LCD  //general LCD support, also 16x2
-    #define DOGLCD  // Support for I2C LCD 128x64 (Controller SSD1306 / SH1106 graphic Display Family)
-  #endif
-
-  #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
-    #define ULTIMAKERCONTROLLER
-  #endif
-
-  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI)
-    #define DOGLCD
-    #define U8GLIB_ST7920
-    #define REPRAP_DISCOUNT_SMART_CONTROLLER
-  #endif
-
-  #if ENABLED(ULTIMAKERCONTROLLER)              \
-   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
-   || ENABLED(G3D_PANEL)                        \
-   || ENABLED(RIGIDBOT_PANEL)
-    #define ULTIPANEL
-    #define NEWPANEL
-  #endif
-
-  #if ENABLED(REPRAPWORLD_KEYPAD)
-    #define NEWPANEL
-    #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
-      #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
-    #endif
-  #endif
-
-  /**
-   * I2C PANELS
-   */
-
-  #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
-
-    // Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
-    // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
-
-    #define LCD_I2C_TYPE_PCF8575
-    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
-    #define ULTIPANEL
-    #define NEWPANEL
-
-  #elif ENABLED(LCD_I2C_PANELOLU2)
-
-    // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
-
-    #define LCD_I2C_TYPE_MCP23017
-    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
-    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
-    #define ULTIPANEL
-    #define NEWPANEL
-
-  #elif ENABLED(LCD_I2C_VIKI)
-
-    /**
-     * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
-     *
-     * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
-     * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
-     * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
-     *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
-     */
-    #define LCD_I2C_TYPE_MCP23017
-    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
-    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
-    #define ULTIPANEL
-    #define NEWPANEL
-
-    #define ENCODER_FEEDRATE_DEADZONE 4
-
-    #ifndef ENCODER_PULSES_PER_STEP
-      #define ENCODER_PULSES_PER_STEP 1
-    #endif
-    #ifndef ENCODER_STEPS_PER_MENU_ITEM
-      #define ENCODER_STEPS_PER_MENU_ITEM 2
-    #endif
-  #endif
-
-  // Set encoder detents for well-known controllers
-  #if ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) || ENABLED(OLED_PANEL_TINYBOY2) \
-   || ENABLED(BQ_LCD_SMART_CONTROLLER) || ENABLED(LCD_I2C_PANELOLU2) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
-    #ifndef ENCODER_PULSES_PER_STEP
-      #define ENCODER_PULSES_PER_STEP 4
-    #endif
-    #ifndef ENCODER_STEPS_PER_MENU_ITEM
-      #define ENCODER_STEPS_PER_MENU_ITEM 1
-    #endif
-  #endif
-
-  // Shift register panels
-  // ---------------------
-  // 2 wire Non-latching LCD SR from:
-  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
-
-  #if ENABLED(SAV_3DLCD)
-    #define SR_LCD_2W_NL    // Non latching 2 wire shift register
-    #define ULTIPANEL
-    #define NEWPANEL
-  #endif
-
-  #if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
-    #ifndef LCD_WIDTH
-      #define LCD_WIDTH 22
-    #endif
-    #ifndef LCD_HEIGHT
-      #define LCD_HEIGHT 5
-    #endif
-  #endif
-
-  #if ENABLED(ULTIPANEL)
-    #define NEWPANEL  //enable this if you have a click-encoder panel
-    #define ULTRA_LCD
-    #ifndef LCD_WIDTH
-      #define LCD_WIDTH 20
-    #endif
-    #ifndef LCD_HEIGHT
-      #define LCD_HEIGHT 4
-    #endif
-  #else // no panel but just LCD
-    #if ENABLED(ULTRA_LCD)
-      #ifndef LCD_WIDTH
-        #define LCD_WIDTH 16
-      #endif
-      #ifndef LCD_HEIGHT
-        #define LCD_HEIGHT 2
-      #endif
-    #endif
-  #endif
-
-  #if ENABLED(DOGLCD)
-    /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
-    // \x00 intentionally skipped to avoid problems in strings
-    #define LCD_STR_REFRESH     "\x01"
-    #define LCD_STR_FOLDER      "\x02"
-    #define LCD_STR_ARROW_RIGHT "\x03"
-    #define LCD_STR_UPLEVEL     "\x04"
-    #define LCD_STR_CLOCK       "\x05"
-    #define LCD_STR_FEEDRATE    "\x06"
-    #define LCD_STR_BEDTEMP     "\x07"
-    #define LCD_STR_THERMOMETER "\x08"
-    #define LCD_STR_DEGREE      "\x09"
-
-    #define LCD_STR_SPECIAL_MAX '\x09'
-    // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
-    // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
-
-    // Symbol characters
-    #define LCD_STR_FILAM_DIA   "\xf8"
-    #define LCD_STR_FILAM_MUL   "\xa4"
-  #else
-    /* Custom characters defined in the first 8 characters of the LCD */
-    #define LCD_BEDTEMP_CHAR     0x00  // Print only as a char. This will have 'unexpected' results when used in a string!
-    #define LCD_DEGREE_CHAR      0x01
-    #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
-    #define LCD_UPLEVEL_CHAR     0x03
-    #define LCD_STR_REFRESH     "\x04"
-    #define LCD_STR_FOLDER      "\x05"
-    #define LCD_FEEDRATE_CHAR    0x06
-    #define LCD_CLOCK_CHAR       0x07
-    #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
-  #endif
-
-  /**
-   * Default LCD contrast for dogm-like LCD displays
-   */
-  #if ENABLED(DOGLCD)
-
-    #define HAS_LCD_CONTRAST ( \
-        ENABLED(MAKRPANEL) \
-     || ENABLED(CARTESIO_UI) \
-     || ENABLED(VIKI2) \
-     || ENABLED(miniVIKI) \
-     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
-    )
-
-    #if HAS_LCD_CONTRAST
-      #ifndef LCD_CONTRAST_MIN
-        #define LCD_CONTRAST_MIN 0
-      #endif
-      #ifndef LCD_CONTRAST_MAX
-        #define LCD_CONTRAST_MAX 63
-      #endif
-      #ifndef DEFAULT_LCD_CONTRAST
-        #define DEFAULT_LCD_CONTRAST 32
-      #endif
-    #endif
-  #endif
-
-  // Boot screens
-  #if DISABLED(ULTRA_LCD)
-    #undef SHOW_BOOTSCREEN
-  #elif !defined(BOOTSCREEN_TIMEOUT)
-    #define BOOTSCREEN_TIMEOUT 2500
-  #endif
-
-  #define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)
-
-  // MK2 Multiplexer forces SINGLENOZZLE to be enabled
-  #if ENABLED(MK2_MULTIPLEXER)
-    #define SINGLENOZZLE
-  #endif
-
-  /**
-   * Extruders have some combination of stepper motors and hotends
-   * so we separate these concepts into the defines:
-   *
-   *  EXTRUDERS    - Number of Selectable Tools
-   *  HOTENDS      - Number of hotends, whether connected or separate
-   *  E_STEPPERS   - Number of actual E stepper motors
-   *  E_MANUAL     - Number of E steppers for LCD move options
-   *  TOOL_E_INDEX - Index to use when getting/setting the tool state
-   *
-   */
-  #if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
-    #define HOTENDS       1
-    #undef TEMP_SENSOR_1_AS_REDUNDANT
-    #undef HOTEND_OFFSET_X
-    #undef HOTEND_OFFSET_Y
-  #else                                                         // Two hotends
-    #define HOTENDS       EXTRUDERS
-    #if ENABLED(SWITCHING_NOZZLE) && !defined(HOTEND_OFFSET_Z)
-      #define HOTEND_OFFSET_Z { 0 }
-    #endif
-  #endif
-
-  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(MIXING_EXTRUDER)   // Unified E axis
-    #if ENABLED(MIXING_EXTRUDER)
-      #define E_STEPPERS  MIXING_STEPPERS
-    #else
-      #define E_STEPPERS  1                                     // One E stepper
-    #endif
-    #define E_MANUAL      1
-    #define TOOL_E_INDEX  0
-  #else
-    #define E_STEPPERS    EXTRUDERS
-    #define E_MANUAL      EXTRUDERS
-    #define TOOL_E_INDEX  current_block->active_extruder
-  #endif
-
-  /**
-   * DISTINCT_E_FACTORS affects how some E factors are accessed
-   */
-  #if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
-    #define XYZE_N (XYZ + E_STEPPERS)
-    #define E_AXIS_N (E_AXIS + extruder)
-  #else
-    #undef DISTINCT_E_FACTORS
-    #define XYZE_N XYZE
-    #define E_AXIS_N E_AXIS
-  #endif
-
-  /**
-   * The BLTouch Probe emulates a servo probe
-   * and uses "special" angles for its state.
-   */
-  #if ENABLED(BLTOUCH)
-    #ifndef Z_ENDSTOP_SERVO_NR
-      #define Z_ENDSTOP_SERVO_NR 0
-    #endif
-    #ifndef NUM_SERVOS
-      #define NUM_SERVOS (Z_ENDSTOP_SERVO_NR + 1)
-    #endif
-    #undef DEACTIVATE_SERVOS_AFTER_MOVE
-    #if NUM_SERVOS == 1
-      #undef SERVO_DELAY
-      #define SERVO_DELAY { 50 }
-    #endif
-    #ifndef BLTOUCH_DELAY
-      #define BLTOUCH_DELAY 375
-    #endif
-    #undef Z_SERVO_ANGLES
-    #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
-
-    #define BLTOUCH_DEPLOY    10
-    #define BLTOUCH_STOW      90
-    #define BLTOUCH_SELFTEST 120
-    #define BLTOUCH_RESET    160
-    #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
-
-    // Always disable probe pin inverting for BLTouch
-    #undef Z_MIN_PROBE_ENDSTOP_INVERTING
-    #define Z_MIN_PROBE_ENDSTOP_INVERTING false
-
-    #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-      #undef Z_MIN_ENDSTOP_INVERTING
-      #define Z_MIN_ENDSTOP_INVERTING false
-      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
-    #else
-      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
-    #endif
-  #endif
-
-  /**
-   * Set a flag for a servo probe
-   */
-  #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
-
-  /**
-   * UBL has its own manual probing, so this just causes trouble.
-   */
-  #if ENABLED(AUTO_BED_LEVELING_UBL)
-    #undef PROBE_MANUALLY
-  #endif
-
-  /**
-   * Set a flag for any enabled probe
-   */
-  #define PROBE_SELECTED (ENABLED(PROBE_MANUALLY) || ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
-
-  /**
-   * Clear probe pin settings when no probe is selected
-   */
-  #if !PROBE_SELECTED || ENABLED(PROBE_MANUALLY)
-    #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
-    #undef Z_MIN_PROBE_ENDSTOP
-  #endif
-
-  #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
-  #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
-  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_RGBW_LED))
-
-#endif // CONDITIONALS_LCD_H

Marlin/Conditionals_post.h

@@ -1,931 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Conditionals_post.h
- * Defines that depend on configuration but are not editable.
- */
-
-#ifndef CONDITIONALS_POST_H
-#define CONDITIONALS_POST_H
-
-  #define IS_SCARA (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA))
-  #define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
-  #define IS_CARTESIAN !IS_KINEMATIC
-
-  /**
-   * Axis lengths and center
-   */
-  #define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS))
-  #define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
-  #define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
-
-  // Defined only if the sanity-check is bypassed
-  #ifndef X_BED_SIZE
-    #define X_BED_SIZE X_MAX_LENGTH
-  #endif
-  #ifndef Y_BED_SIZE
-    #define Y_BED_SIZE Y_MAX_LENGTH
-  #endif
-
-  // Require 0,0 bed center for Delta and SCARA
-  #if IS_KINEMATIC
-    #define BED_CENTER_AT_0_0
-  #endif
-
-  // Define center values for future use
-  #if ENABLED(BED_CENTER_AT_0_0)
-    #define X_CENTER 0
-    #define Y_CENTER 0
-  #else
-    #define X_CENTER ((X_BED_SIZE) / 2)
-    #define Y_CENTER ((Y_BED_SIZE) / 2)
-  #endif
-  #define Z_CENTER ((Z_MIN_POS + Z_MAX_POS) / 2)
-
-  // Get the linear boundaries of the bed
-  #define X_MIN_BED (X_CENTER - (X_BED_SIZE) / 2)
-  #define X_MAX_BED (X_CENTER + (X_BED_SIZE) / 2)
-  #define Y_MIN_BED (Y_CENTER - (Y_BED_SIZE) / 2)
-  #define Y_MAX_BED (Y_CENTER + (Y_BED_SIZE) / 2)
-
-  /**
-   * CoreXY, CoreXZ, and CoreYZ - and their reverse
-   */
-  #define CORE_IS_XY (ENABLED(COREXY) || ENABLED(COREYX))
-  #define CORE_IS_XZ (ENABLED(COREXZ) || ENABLED(COREZX))
-  #define CORE_IS_YZ (ENABLED(COREYZ) || ENABLED(COREZY))
-  #define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ)
-  #if IS_CORE
-    #if CORE_IS_XY
-      #define CORE_AXIS_1 A_AXIS
-      #define CORE_AXIS_2 B_AXIS
-      #define NORMAL_AXIS Z_AXIS
-    #elif CORE_IS_XZ
-      #define CORE_AXIS_1 A_AXIS
-      #define NORMAL_AXIS Y_AXIS
-      #define CORE_AXIS_2 C_AXIS
-    #elif CORE_IS_YZ
-      #define NORMAL_AXIS X_AXIS
-      #define CORE_AXIS_1 B_AXIS
-      #define CORE_AXIS_2 C_AXIS
-    #endif
-    #if (ENABLED(COREYX) || ENABLED(COREZX) || ENABLED(COREZY))
-      #define CORESIGN(n) (-(n))
-    #else
-      #define CORESIGN(n) (n)
-    #endif
-  #endif
-
-  /**
-   * No adjustable bed on non-cartesians
-   */
-  #if IS_KINEMATIC
-    #undef LEVEL_BED_CORNERS
-  #endif
-
-  /**
-   * SCARA cannot use SLOWDOWN and requires QUICKHOME
-   */
-  #if IS_SCARA
-    #undef SLOWDOWN
-    #define QUICK_HOME
-  #endif
-
-  /**
-   * Set the home position based on settings or manual overrides
-   */
-  #ifdef MANUAL_X_HOME_POS
-    #define X_HOME_POS MANUAL_X_HOME_POS
-  #elif ENABLED(BED_CENTER_AT_0_0)
-    #if ENABLED(DELTA)
-      #define X_HOME_POS 0
-    #else
-      #define X_HOME_POS ((X_BED_SIZE) * (X_HOME_DIR) * 0.5)
-    #endif
-  #else
-    #if ENABLED(DELTA)
-      #define X_HOME_POS (X_MIN_POS + (X_BED_SIZE) * 0.5)
-    #else
-      #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
-    #endif
-  #endif
-
-  #ifdef MANUAL_Y_HOME_POS
-    #define Y_HOME_POS MANUAL_Y_HOME_POS
-  #elif ENABLED(BED_CENTER_AT_0_0)
-    #if ENABLED(DELTA)
-      #define Y_HOME_POS 0
-    #else
-      #define Y_HOME_POS ((Y_BED_SIZE) * (Y_HOME_DIR) * 0.5)
-    #endif
-  #else
-    #if ENABLED(DELTA)
-      #define Y_HOME_POS (Y_MIN_POS + (Y_BED_SIZE) * 0.5)
-    #else
-      #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
-    #endif
-  #endif
-
-  #ifdef MANUAL_Z_HOME_POS
-    #define Z_HOME_POS MANUAL_Z_HOME_POS
-  #else
-    #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
-  #endif
-
-  /**
-   * If DELTA_HEIGHT isn't defined use the old setting
-   */
-  #if ENABLED(DELTA) && !defined(DELTA_HEIGHT)
-    #define DELTA_HEIGHT Z_HOME_POS
-  #endif
-
-  /**
-   * Auto Bed Leveling and Z Probe Repeatability Test
-   */
-  #define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))
-
-  /**
-   * Z Sled Probe requires Z_SAFE_HOMING
-   */
-  #if ENABLED(Z_PROBE_SLED)
-    #define Z_SAFE_HOMING
-  #endif
-
-  /**
-   * DELTA should ignore Z_SAFE_HOMING and SLOWDOWN
-   */
-  #if ENABLED(DELTA)
-    #undef Z_SAFE_HOMING
-    #undef SLOWDOWN
-  #endif
-
-  /**
-   * Safe Homing Options
-   */
-  #if ENABLED(Z_SAFE_HOMING)
-    #ifndef Z_SAFE_HOMING_X_POINT
-      #define Z_SAFE_HOMING_X_POINT X_CENTER
-    #endif
-    #ifndef Z_SAFE_HOMING_Y_POINT
-      #define Z_SAFE_HOMING_Y_POINT Y_CENTER
-    #endif
-    #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT
-    #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT
-  #else
-    #define X_TILT_FULCRUM X_HOME_POS
-    #define Y_TILT_FULCRUM Y_HOME_POS
-  #endif
-
-  /**
-   * Host keep alive
-   */
-  #ifndef DEFAULT_KEEPALIVE_INTERVAL
-    #define DEFAULT_KEEPALIVE_INTERVAL 2
-  #endif
-
-  /**
-   * Provide a MAX_AUTORETRACT for older configs
-   */
-  #if ENABLED(FWRETRACT) && !defined(MAX_AUTORETRACT)
-    #define MAX_AUTORETRACT 99
-  #endif
-
-  /**
-   * MAX_STEP_FREQUENCY differs for TOSHIBA
-   */
-  #if ENABLED(CONFIG_STEPPERS_TOSHIBA)
-    #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
-  #else
-    #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
-  #endif
-
-  // MS1 MS2 Stepper Driver Microstepping mode table
-  #define MICROSTEP1 LOW,LOW
-  #define MICROSTEP2 HIGH,LOW
-  #define MICROSTEP4 LOW,HIGH
-  #define MICROSTEP8 HIGH,HIGH
-  #define MICROSTEP16 HIGH,HIGH
-
-  /**
-   * Advance calculated values
-   */
-  #if ENABLED(ADVANCE)
-    #define EXTRUSION_AREA (0.25 * (D_FILAMENT) * (D_FILAMENT) * M_PI)
-    #define STEPS_PER_CUBIC_MM_E (axis_steps_per_mm[E_AXIS_N] / (EXTRUSION_AREA))
-  #endif
-
-  #if ENABLED(ULTIPANEL) && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER)
-    #undef SD_DETECT_INVERTED
-  #endif
-
-  /**
-   * Set defaults for missing (newer) options
-   */
-  #ifndef DISABLE_INACTIVE_X
-    #define DISABLE_INACTIVE_X DISABLE_X
-  #endif
-  #ifndef DISABLE_INACTIVE_Y
-    #define DISABLE_INACTIVE_Y DISABLE_Y
-  #endif
-  #ifndef DISABLE_INACTIVE_Z
-    #define DISABLE_INACTIVE_Z DISABLE_Z
-  #endif
-  #ifndef DISABLE_INACTIVE_E
-    #define DISABLE_INACTIVE_E DISABLE_E
-  #endif
-
-  // Power Signal Control Definitions
-  // By default use ATX definition
-  #ifndef POWER_SUPPLY
-    #define POWER_SUPPLY 1
-  #endif
-  #if (POWER_SUPPLY == 1)     // 1 = ATX
-    #define PS_ON_AWAKE  LOW
-    #define PS_ON_ASLEEP HIGH
-  #elif (POWER_SUPPLY == 2)   // 2 = X-Box 360 203W
-    #define PS_ON_AWAKE  HIGH
-    #define PS_ON_ASLEEP LOW
-  #endif
-  #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
-
-  /**
-   * Temp Sensor defines
-   */
-  #if TEMP_SENSOR_0 == -3
-    #define HEATER_0_USES_MAX6675
-    #define MAX6675_IS_MAX31855
-    #define MAX6675_TMIN -270
-    #define MAX6675_TMAX 1800
-  #elif TEMP_SENSOR_0 == -2
-    #define HEATER_0_USES_MAX6675
-    #define MAX6675_TMIN 0
-    #define MAX6675_TMAX 1024
-  #elif TEMP_SENSOR_0 == -1
-    #define HEATER_0_USES_AD595
-  #elif TEMP_SENSOR_0 == 0
-    #undef HEATER_0_MINTEMP
-    #undef HEATER_0_MAXTEMP
-  #elif TEMP_SENSOR_0 > 0
-    #define THERMISTORHEATER_0 TEMP_SENSOR_0
-    #define HEATER_0_USES_THERMISTOR
-  #endif
-
-  #if TEMP_SENSOR_1 <= -2
-    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_1"
-  #elif TEMP_SENSOR_1 == -1
-    #define HEATER_1_USES_AD595
-  #elif TEMP_SENSOR_1 == 0
-    #undef HEATER_1_MINTEMP
-    #undef HEATER_1_MAXTEMP
-  #elif TEMP_SENSOR_1 > 0
-    #define THERMISTORHEATER_1 TEMP_SENSOR_1
-    #define HEATER_1_USES_THERMISTOR
-  #endif
-
-  #if TEMP_SENSOR_2 <= -2
-    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_2"
-  #elif TEMP_SENSOR_2 == -1
-    #define HEATER_2_USES_AD595
-  #elif TEMP_SENSOR_2 == 0
-    #undef HEATER_2_MINTEMP
-    #undef HEATER_2_MAXTEMP
-  #elif TEMP_SENSOR_2 > 0
-    #define THERMISTORHEATER_2 TEMP_SENSOR_2
-    #define HEATER_2_USES_THERMISTOR
-  #endif
-
-  #if TEMP_SENSOR_3 <= -2
-    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_3"
-  #elif TEMP_SENSOR_3 == -1
-    #define HEATER_3_USES_AD595
-  #elif TEMP_SENSOR_3 == 0
-    #undef HEATER_3_MINTEMP
-    #undef HEATER_3_MAXTEMP
-  #elif TEMP_SENSOR_3 > 0
-    #define THERMISTORHEATER_3 TEMP_SENSOR_3
-    #define HEATER_3_USES_THERMISTOR
-  #endif
-
-  #if TEMP_SENSOR_4 <= -2
-    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_4"
-  #elif TEMP_SENSOR_4 == -1
-    #define HEATER_4_USES_AD595
-  #elif TEMP_SENSOR_4 == 0
-    #undef HEATER_4_MINTEMP
-    #undef HEATER_4_MAXTEMP
-  #elif TEMP_SENSOR_4 > 0
-    #define THERMISTORHEATER_4 TEMP_SENSOR_4
-    #define HEATER_4_USES_THERMISTOR
-  #endif
-
-  #if TEMP_SENSOR_BED <= -2
-    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_BED"
-  #elif TEMP_SENSOR_BED == -1
-    #define BED_USES_AD595
-  #elif TEMP_SENSOR_BED == 0
-    #undef BED_MINTEMP
-    #undef BED_MAXTEMP
-  #elif TEMP_SENSOR_BED > 0
-    #define THERMISTORBED TEMP_SENSOR_BED
-    #define BED_USES_THERMISTOR
-  #endif
-
-  /**
-   * Flags for PID handling
-   */
-  #define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
-  #define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
-
-  /**
-   * Default hotend offsets, if not defined
-   */
-  #if HOTENDS > 1
-    #ifndef HOTEND_OFFSET_X
-      #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
-    #endif
-    #ifndef HOTEND_OFFSET_Y
-      #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
-    #endif
-    #if !defined(HOTEND_OFFSET_Z) && (ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_NOZZLE))
-      #define HOTEND_OFFSET_Z { 0 }
-    #endif
-  #endif
-
-  /**
-   * ARRAY_BY_EXTRUDERS based on EXTRUDERS
-   */
-  #define ARRAY_BY_EXTRUDERS(...) ARRAY_N(EXTRUDERS, __VA_ARGS__)
-  #define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
-
-  /**
-   * ARRAY_BY_HOTENDS based on HOTENDS
-   */
-  #define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__)
-  #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
-
-  /**
-   * Z_DUAL_ENDSTOPS endstop reassignment
-   */
-  #if ENABLED(Z_DUAL_ENDSTOPS)
-    #define _XMIN_ 100
-    #define _YMIN_ 200
-    #define _ZMIN_ 300
-    #define _XMAX_ 101
-    #define _YMAX_ 201
-    #define _ZMAX_ 301
-    #if Z2_USE_ENDSTOP == _XMIN_
-      #define USE_XMIN_PLUG
-    #elif Z2_USE_ENDSTOP == _XMAX_
-      #define USE_XMAX_PLUG
-    #elif Z2_USE_ENDSTOP == _YMIN_
-      #define USE_YMIN_PLUG
-    #elif Z2_USE_ENDSTOP == _YMAX_
-      #define USE_YMAX_PLUG
-    #elif Z2_USE_ENDSTOP == _ZMIN_
-      #define USE_ZMIN_PLUG
-    #elif Z2_USE_ENDSTOP == _ZMAX_
-      #define USE_ZMAX_PLUG
-    #endif
-    #if Z_HOME_DIR > 0
-      #if Z2_USE_ENDSTOP == _XMIN_
-        #define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN X_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _XMAX_
-        #define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN X_MAX_PIN
-      #elif Z2_USE_ENDSTOP == _YMIN_
-        #define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Y_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _YMAX_
-        #define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Y_MAX_PIN
-      #elif Z2_USE_ENDSTOP == _ZMIN_
-        #define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Z_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _ZMAX_
-        #define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
-        #define Z2_MAX_PIN Z_MAX_PIN
-      #else
-        #define Z2_MAX_ENDSTOP_INVERTING false
-      #endif
-    #else
-      #if Z2_USE_ENDSTOP == _XMIN_
-        #define Z2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN X_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _XMAX_
-        #define Z2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN X_MAX_PIN
-      #elif Z2_USE_ENDSTOP == _YMIN_
-        #define Z2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN Y_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _YMAX_
-        #define Z2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN Y_MAX_PIN
-      #elif Z2_USE_ENDSTOP == _ZMIN_
-        #define Z2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN Z_MIN_PIN
-      #elif Z2_USE_ENDSTOP == _ZMAX_
-        #define Z2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
-        #define Z2_MIN_PIN Z_MAX_PIN
-      #else
-        #define Z2_MIN_ENDSTOP_INVERTING false
-      #endif
-    #endif
-  #endif
-
-  // Is an endstop plug used for the Z2 endstop or the bed probe?
-  #define IS_Z2_OR_PROBE(A,M) ( \
-       (ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP == _##A##M##_) \
-    || (ENABLED(Z_MIN_PROBE_ENDSTOP) && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
-
-  /**
-   * Set ENDSTOPPULLUPS for active endstop switches
-   */
-  #if ENABLED(ENDSTOPPULLUPS)
-    #if ENABLED(USE_XMAX_PLUG)
-      #define ENDSTOPPULLUP_XMAX
-    #endif
-    #if ENABLED(USE_YMAX_PLUG)
-      #define ENDSTOPPULLUP_YMAX
-    #endif
-    #if ENABLED(USE_ZMAX_PLUG)
-      #define ENDSTOPPULLUP_ZMAX
-    #endif
-    #if ENABLED(USE_XMIN_PLUG)
-      #define ENDSTOPPULLUP_XMIN
-    #endif
-    #if ENABLED(USE_YMIN_PLUG)
-      #define ENDSTOPPULLUP_YMIN
-    #endif
-    #if ENABLED(USE_ZMIN_PLUG)
-      #define ENDSTOPPULLUP_ZMIN
-    #endif
-  #endif
-
-  /**
-   * Shorthand for pin tests, used wherever needed
-   */
-
-  // Steppers
-  #define HAS_X_ENABLE      (PIN_EXISTS(X_ENABLE))
-  #define HAS_X_DIR         (PIN_EXISTS(X_DIR))
-  #define HAS_X_STEP        (PIN_EXISTS(X_STEP))
-  #define HAS_X_MICROSTEPS  (PIN_EXISTS(X_MS1))
-
-  #define HAS_X2_ENABLE     (PIN_EXISTS(X2_ENABLE))
-  #define HAS_X2_DIR        (PIN_EXISTS(X2_DIR))
-  #define HAS_X2_STEP       (PIN_EXISTS(X2_STEP))
-  #define HAS_Y_MICROSTEPS  (PIN_EXISTS(Y_MS1))
-
-  #define HAS_Y_ENABLE      (PIN_EXISTS(Y_ENABLE))
-  #define HAS_Y_DIR         (PIN_EXISTS(Y_DIR))
-  #define HAS_Y_STEP        (PIN_EXISTS(Y_STEP))
-  #define HAS_Z_MICROSTEPS  (PIN_EXISTS(Z_MS1))
-
-  #define HAS_Y2_ENABLE     (PIN_EXISTS(Y2_ENABLE))
-  #define HAS_Y2_DIR        (PIN_EXISTS(Y2_DIR))
-  #define HAS_Y2_STEP       (PIN_EXISTS(Y2_STEP))
-
-  #define HAS_Z_ENABLE      (PIN_EXISTS(Z_ENABLE))
-  #define HAS_Z_DIR         (PIN_EXISTS(Z_DIR))
-  #define HAS_Z_STEP        (PIN_EXISTS(Z_STEP))
-
-  #define HAS_Z2_ENABLE     (PIN_EXISTS(Z2_ENABLE))
-  #define HAS_Z2_DIR        (PIN_EXISTS(Z2_DIR))
-  #define HAS_Z2_STEP       (PIN_EXISTS(Z2_STEP))
-
-  // Extruder steppers and solenoids
-  #define HAS_E0_ENABLE     (PIN_EXISTS(E0_ENABLE))
-  #define HAS_E0_DIR        (PIN_EXISTS(E0_DIR))
-  #define HAS_E0_STEP       (PIN_EXISTS(E0_STEP))
-  #define HAS_E0_MICROSTEPS (PIN_EXISTS(E0_MS1))
-  #define HAS_SOLENOID_0    (PIN_EXISTS(SOL0))
-
-  #define HAS_E1_ENABLE     (PIN_EXISTS(E1_ENABLE))
-  #define HAS_E1_DIR        (PIN_EXISTS(E1_DIR))
-  #define HAS_E1_STEP       (PIN_EXISTS(E1_STEP))
-  #define HAS_E1_MICROSTEPS (PIN_EXISTS(E1_MS1))
-  #define HAS_SOLENOID_1    (PIN_EXISTS(SOL1))
-
-  #define HAS_E2_ENABLE     (PIN_EXISTS(E2_ENABLE))
-  #define HAS_E2_DIR        (PIN_EXISTS(E2_DIR))
-  #define HAS_E2_STEP       (PIN_EXISTS(E2_STEP))
-  #define HAS_E2_MICROSTEPS (PIN_EXISTS(E2_MS1))
-  #define HAS_SOLENOID_2    (PIN_EXISTS(SOL2))
-
-  #define HAS_E3_ENABLE     (PIN_EXISTS(E3_ENABLE))
-  #define HAS_E3_DIR        (PIN_EXISTS(E3_DIR))
-  #define HAS_E3_STEP       (PIN_EXISTS(E3_STEP))
-  #define HAS_E3_MICROSTEPS (PIN_EXISTS(E3_MS1))
-  #define HAS_SOLENOID_3    (PIN_EXISTS(SOL3))
-
-  #define HAS_E4_ENABLE     (PIN_EXISTS(E4_ENABLE))
-  #define HAS_E4_DIR        (PIN_EXISTS(E4_DIR))
-  #define HAS_E4_STEP       (PIN_EXISTS(E4_STEP))
-  #define HAS_E4_MICROSTEPS (PIN_EXISTS(E4_MS1))
-  #define HAS_SOLENOID_4    (PIN_EXISTS(SOL4))
-
-  // Endstops and bed probe
-  #define HAS_X_MIN (PIN_EXISTS(X_MIN) && !IS_Z2_OR_PROBE(X,MIN))
-  #define HAS_X_MAX (PIN_EXISTS(X_MAX) && !IS_Z2_OR_PROBE(X,MAX))
-  #define HAS_Y_MIN (PIN_EXISTS(Y_MIN) && !IS_Z2_OR_PROBE(Y,MIN))
-  #define HAS_Y_MAX (PIN_EXISTS(Y_MAX) && !IS_Z2_OR_PROBE(Y,MAX))
-  #define HAS_Z_MIN (PIN_EXISTS(Z_MIN) && !IS_Z2_OR_PROBE(Z,MIN))
-  #define HAS_Z_MAX (PIN_EXISTS(Z_MAX) && !IS_Z2_OR_PROBE(Z,MAX))
-  #define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
-  #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
-  #define HAS_Z_MIN_PROBE_PIN (PIN_EXISTS(Z_MIN_PROBE))
-
-  // Thermistors
-  #define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 > -2)
-  #define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0 && TEMP_SENSOR_1 > -2)
-  #define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0 && TEMP_SENSOR_2 > -2)
-  #define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0 && TEMP_SENSOR_3 > -2)
-  #define HAS_TEMP_4 (PIN_EXISTS(TEMP_4) && TEMP_SENSOR_4 != 0 && TEMP_SENSOR_4 > -2)
-  #define HAS_TEMP_HOTEND (HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675))
-  #define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0 && TEMP_SENSOR_BED > -2)
-
-  // Heaters
-  #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
-  #define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
-  #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
-  #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
-  #define HAS_HEATER_4 (PIN_EXISTS(HEATER_4))
-  #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
-
-  // Thermal protection
-  #define HAS_THERMALLY_PROTECTED_BED (ENABLED(THERMAL_PROTECTION_BED) && HAS_TEMP_BED && HAS_HEATER_BED)
-  #define WATCH_HOTENDS (ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0)
-  #define WATCH_THE_BED (HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0)
-
-  // Auto fans
-  #define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
-  #define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
-  #define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
-  #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
-  #define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
-  #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
-  #define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
-  #define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
-  #define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
-  #define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
-  #define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
-  #define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
-  #define AUTO_4_IS_0 (E4_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
-  #define AUTO_4_IS_1 (E4_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
-  #define AUTO_4_IS_2 (E4_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
-  #define AUTO_4_IS_3 (E4_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
-
-  // Other fans
-  #define HAS_FAN0 (PIN_EXISTS(FAN))
-  #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
-  #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
-  #define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN))
-
-  // Servos
-  #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
-  #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
-  #define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
-  #define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
-  #define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
-
-  // Sensors
-  #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
-  #define HAS_FIL_RUNOUT (PIN_EXISTS(FIL_RUNOUT))
-
-  // User Interface
-  #define HAS_HOME (PIN_EXISTS(HOME))
-  #define HAS_KILL (PIN_EXISTS(KILL))
-  #define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
-  #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
-  #define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
-  #define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
-
-  // Digital control
-  #define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS)
-  #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
-  #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
-  #define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
-
-  /**
-   * This setting is also used by M109 when trying to calculate
-   * a ballpark safe margin to prevent wait-forever situation.
-   */
-  #ifndef EXTRUDE_MINTEMP
-    #define EXTRUDE_MINTEMP 170
-  #endif
-
-  /**
-   * Helper Macros for heaters and extruder fan
-   */
-  #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v)
-  #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
-    #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v)
-    #if HOTENDS > 2
-      #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v)
-      #if HOTENDS > 3
-        #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v)
-        #if HOTENDS > 4
-          #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, v)
-        #endif // HOTENDS > 4
-      #endif // HOTENDS > 3
-    #endif // HOTENDS > 2
-  #endif // HOTENDS > 1
-  #if ENABLED(HEATERS_PARALLEL)
-    #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
-  #else
-    #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
-  #endif
-
-  /**
-   * Heated bed requires settings
-   */
-  #if HAS_HEATER_BED
-    #ifndef MAX_BED_POWER
-      #define MAX_BED_POWER 255
-    #endif
-    #ifndef HEATER_BED_INVERTING
-      #define HEATER_BED_INVERTING false
-    #endif
-    #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, (v) ^ HEATER_BED_INVERTING)
-  #endif
-
-  /**
-   * Up to 3 PWM fans
-   */
-  #if HAS_FAN2
-    #define FAN_COUNT 3
-  #elif HAS_FAN1
-    #define FAN_COUNT 2
-  #elif HAS_FAN0
-    #define FAN_COUNT 1
-  #else
-    #define FAN_COUNT 0
-  #endif
-
-  #if HAS_FAN0
-    #define WRITE_FAN(v) WRITE(FAN_PIN, v)
-    #define WRITE_FAN0(v) WRITE_FAN(v)
-  #endif
-  #if HAS_FAN1
-    #define WRITE_FAN1(v) WRITE(FAN1_PIN, v)
-  #endif
-  #if HAS_FAN2
-    #define WRITE_FAN2(v) WRITE(FAN2_PIN, v)
-  #endif
-  #define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
-
-  /**
-   * Part Cooling fan multipliexer
-   */
-  #define HAS_FANMUX PIN_EXISTS(FANMUX0)
-
-  /**
-   * Servos and probes
-   */
-
-  #if HAS_SERVOS
-    #ifndef Z_ENDSTOP_SERVO_NR
-      #define Z_ENDSTOP_SERVO_NR -1
-    #endif
-  #endif
-
-  #define PROBE_PIN_CONFIGURED (HAS_Z_MIN_PROBE_PIN || (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)))
-  #define HAS_BED_PROBE (PROBE_SELECTED && PROBE_PIN_CONFIGURED && DISABLED(PROBE_MANUALLY))
-
-  #if ENABLED(Z_PROBE_ALLEN_KEY)
-    #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
-  #endif
-
-  /**
-   * Bed Probe dependencies
-   */
-  #if HAS_BED_PROBE
-    #if ENABLED(ENDSTOPPULLUPS) && HAS_Z_MIN_PROBE_PIN
-      #define ENDSTOPPULLUP_ZMIN_PROBE
-    #endif
-    #ifndef Z_PROBE_OFFSET_RANGE_MIN
-      #define Z_PROBE_OFFSET_RANGE_MIN -20
-    #endif
-    #ifndef Z_PROBE_OFFSET_RANGE_MAX
-      #define Z_PROBE_OFFSET_RANGE_MAX 20
-    #endif
-    #ifndef XY_PROBE_SPEED
-      #ifdef HOMING_FEEDRATE_XY
-        #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
-      #else
-        #define XY_PROBE_SPEED 4000
-      #endif
-    #endif
-    #if Z_CLEARANCE_BETWEEN_PROBES > Z_CLEARANCE_DEPLOY_PROBE
-      #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_BETWEEN_PROBES
-    #else
-      #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_DEPLOY_PROBE
-    #endif
-  #else
-    #undef X_PROBE_OFFSET_FROM_EXTRUDER
-    #undef Y_PROBE_OFFSET_FROM_EXTRUDER
-    #undef Z_PROBE_OFFSET_FROM_EXTRUDER
-    #define X_PROBE_OFFSET_FROM_EXTRUDER 0
-    #define Y_PROBE_OFFSET_FROM_EXTRUDER 0
-    #define Z_PROBE_OFFSET_FROM_EXTRUDER 0
-  #endif
-
-  /**
-   * Heater & Fan Pausing
-   */
-  #if FAN_COUNT == 0
-    #undef PROBING_FANS_OFF
-  #endif
-  #define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
-  #define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
-
-  /**
-   * Delta radius/rod trimmers/angle trimmers
-   */
-  #if ENABLED(DELTA)
-    #ifndef DELTA_CALIBRATION_RADIUS
-      #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - 10
-    #endif
-    #ifndef DELTA_ENDSTOP_ADJ
-      #define DELTA_ENDSTOP_ADJ { 0, 0, 0 }
-    #endif
-    #ifndef DELTA_TOWER_ANGLE_TRIM
-      #define DELTA_TOWER_ANGLE_TRIM {0, 0, 0}
-    #endif
-    #ifndef DELTA_RADIUS_TRIM_TOWER
-      #define DELTA_RADIUS_TRIM_TOWER {0, 0, 0}
-    #endif
-    #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER
-      #define DELTA_DIAGONAL_ROD_TRIM_TOWER {0, 0, 0}
-    #endif
-  #endif
-
-  /**
-   * Set granular options based on the specific type of leveling
-   */
-
-  #define UBL_DELTA  (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA) || ENABLED(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN)))
-  #define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
-  #define ABL_GRID   (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
-  #define HAS_ABL    (ABL_PLANAR || ABL_GRID || ENABLED(AUTO_BED_LEVELING_UBL))
-  #define HAS_LEVELING          (HAS_ABL || ENABLED(MESH_BED_LEVELING))
-  #define PLANNER_LEVELING      (ABL_PLANAR || ABL_GRID || ENABLED(MESH_BED_LEVELING) || UBL_DELTA)
-  #define HAS_PROBING_PROCEDURE (HAS_ABL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
-  #if HAS_PROBING_PROCEDURE
-    #define PROBE_BED_WIDTH abs(RIGHT_PROBE_BED_POSITION - (LEFT_PROBE_BED_POSITION))
-    #define PROBE_BED_HEIGHT abs(BACK_PROBE_BED_POSITION - (FRONT_PROBE_BED_POSITION))
-  #endif
-
-  /**
-   * Buzzer/Speaker
-   */
-  #if ENABLED(LCD_USE_I2C_BUZZER)
-    #ifndef LCD_FEEDBACK_FREQUENCY_HZ
-      #define LCD_FEEDBACK_FREQUENCY_HZ 1000
-    #endif
-    #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
-      #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
-    #endif
-  #else
-    #ifndef LCD_FEEDBACK_FREQUENCY_HZ
-      #define LCD_FEEDBACK_FREQUENCY_HZ 5000
-    #endif
-    #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
-      #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
-    #endif
-  #endif
-
-  /**
-   * Z_HOMING_HEIGHT / Z_CLEARANCE_BETWEEN_PROBES
-   */
-  #ifndef Z_HOMING_HEIGHT
-    #ifndef Z_CLEARANCE_BETWEEN_PROBES
-      #define Z_HOMING_HEIGHT 0
-    #else
-      #define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
-    #endif
-  #endif
-  #ifndef Z_CLEARANCE_BETWEEN_PROBES
-    #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT
-  #endif
-  #if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT
-    #define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
-  #else
-    #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
-  #endif
-
-  /**
-   * Bed Probing rectangular bounds
-   * These can be further constrained in code for Delta and SCARA
-   */
-  #if ENABLED(DELTA)
-    #ifndef DELTA_PROBEABLE_RADIUS
-      #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
-    #endif
-    // Probing points may be verified at compile time within the radius
-    // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
-    // so that may be added to SanityCheck.h in the future.
-    #define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS))
-    #define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS))
-    #define MAX_PROBE_X (X_CENTER +  DELTA_PROBEABLE_RADIUS)
-    #define MAX_PROBE_Y (Y_CENTER +  DELTA_PROBEABLE_RADIUS)
-  #elif IS_SCARA
-    #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
-    #define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS))
-    #define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS))
-    #define MAX_PROBE_X (X_CENTER +  SCARA_PRINTABLE_RADIUS)
-    #define MAX_PROBE_Y (Y_CENTER +  SCARA_PRINTABLE_RADIUS)
-  #else
-    // Boundaries for Cartesian probing based on set limits
-    #if ENABLED(BED_CENTER_AT_0_0)
-      #define MIN_PROBE_X (max(X_PROBE_OFFSET_FROM_EXTRUDER, 0) - (X_BED_SIZE) / 2)
-      #define MIN_PROBE_Y (max(Y_PROBE_OFFSET_FROM_EXTRUDER, 0) - (Y_BED_SIZE) / 2)
-      #define MAX_PROBE_X (min(X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER, X_BED_SIZE) - (X_BED_SIZE) / 2)
-      #define MAX_PROBE_Y (min(Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_BED_SIZE) - (Y_BED_SIZE) / 2)
-    #else
-      #define MIN_PROBE_X (max(X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER, 0))
-      #define MIN_PROBE_Y (max(Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, 0))
-      #define MAX_PROBE_X (min(X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_BED_SIZE))
-      #define MAX_PROBE_Y (min(Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_BED_SIZE))
-    #endif
-  #endif
-
-  // Stepper pulse duration, in cycles
-  #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
-
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
-  #endif
-
-  // Updated G92 behavior shifts the workspace
-  #define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS)
-  // The home offset also shifts the coordinate space
-  #define HAS_HOME_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DELTA))
-  // Either offset yields extra calculations on all moves
-  #define HAS_WORKSPACE_OFFSET (HAS_POSITION_SHIFT || HAS_HOME_OFFSET)
-  // M206 doesn't apply to DELTA
-  #define HAS_M206_COMMAND (HAS_HOME_OFFSET && DISABLED(DELTA))
-
-  // LCD timeout to status screen default is 15s
-  #ifndef LCD_TIMEOUT_TO_STATUS
-    #define LCD_TIMEOUT_TO_STATUS 15000
-  #endif
-
-  /**
-   * DELTA_SEGMENT_MIN_LENGTH for UBL_DELTA
-   */
-  #if UBL_DELTA
-    #ifndef DELTA_SEGMENT_MIN_LENGTH
-      #if IS_SCARA
-        #define DELTA_SEGMENT_MIN_LENGTH 0.25 // SCARA minimum segment size is 0.25mm
-      #elif ENABLED(DELTA)
-        #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DELTA_SEGMENTS_PER_SECOND)
-      #else // CARTESIAN
-        #define DELTA_SEGMENT_MIN_LENGTH 1.00 // mm (similar to G2/G3 arc segmentation)
-      #endif
-    #endif
-  #endif
-
-  // Shorthand
-  #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
-
-  // Add commands that need sub-codes to this list
-  #define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET)
-
-  // MESH_BED_LEVELING overrides PROBE_MANUALLY
-  #if ENABLED(MESH_BED_LEVELING)
-    #undef PROBE_MANUALLY
-  #endif
-
-  // Parking Extruder
-  #if ENABLED(PARKING_EXTRUDER)
-    #ifndef PARKING_EXTRUDER_GRAB_DISTANCE
-      #define PARKING_EXTRUDER_GRAB_DISTANCE 0
-    #endif
-    #ifndef PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE
-      #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE HIGH
-    #endif
-  #endif
-
-#endif // CONDITIONALS_POST_H

Marlin/G26_Mesh_Validation_Tool.cpp

@@ -1,892 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Marlin Firmware -- G26 - Mesh Validation Tool
- */
-
-#include "MarlinConfig.h"
-
-#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_G26_MESH_VALIDATION)
-
-  #include "ubl.h"
-  #include "Marlin.h"
-  #include "planner.h"
-  #include "stepper.h"
-  #include "temperature.h"
-  #include "ultralcd.h"
-  #include "gcode.h"
-
-  #define EXTRUSION_MULTIPLIER 1.0
-  #define RETRACTION_MULTIPLIER 1.0
-  #define NOZZLE 0.4
-  #define FILAMENT 1.75
-  #define LAYER_HEIGHT 0.2
-  #define PRIME_LENGTH 10.0
-  #define BED_TEMP 60.0
-  #define HOTEND_TEMP 205.0
-  #define OOZE_AMOUNT 0.3
-
-  #define SIZE_OF_INTERSECTION_CIRCLES 5
-  #define SIZE_OF_CROSSHAIRS 3
-
-  #if SIZE_OF_CROSSHAIRS >= SIZE_OF_INTERSECTION_CIRCLES
-    #error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
-  #endif
-
-  /**
-   *   G26 Mesh Validation Tool
-   *
-   *   G26 is a Mesh Validation Tool intended to provide support for the Marlin Unified Bed Leveling System.
-   *   In order to fully utilize and benefit from the Marlin Unified Bed Leveling System an accurate Mesh must
-   *   be defined. G29 is designed to allow the user to quickly validate the correctness of her Mesh. It will
-   *   first heat the bed and nozzle. It will then print lines and circles along the Mesh Cell boundaries and
-   *   the intersections of those lines (respectively).
-   *
-   *   This action allows the user to immediately see where the Mesh is properly defined and where it needs to
-   *   be edited. The command will generate the Mesh lines closest to the nozzle's starting position. Alternatively
-   *   the user can specify the X and Y position of interest with command parameters. This allows the user to
-   *   focus on a particular area of the Mesh where attention is needed.
-   *
-   *   B #  Bed         Set the Bed Temperature. If not specified, a default of 60 C. will be assumed.
-   *
-   *   C    Current     When searching for Mesh Intersection points to draw, use the current nozzle location
-   *                    as the base for any distance comparison.
-   *
-   *   D    Disable     Disable the Unified Bed Leveling System. In the normal case the user is invoking this
-   *                    command to see how well a Mesh as been adjusted to match a print surface. In order to do
-   *                    this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
-   *                    alters the command's normal behaviour and disables the Unified Bed Leveling System even if
-   *                    it is on.
-   *
-   *   H #  Hotend      Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
-   *
-   *   F #  Filament    Used to specify the diameter of the filament being used. If not specified
-   *                    1.75mm filament is assumed. If you are not getting acceptable results by using the
-   *                    'correct' numbers, you can scale this number up or down a little bit to change the amount
-   *                    of filament that is being extruded during the printing of the various lines on the bed.
-   *
-   *   K    Keep-On     Keep the heaters turned on at the end of the command.
-   *
-   *   L #  Layer       Layer height. (Height of nozzle above bed)  If not specified .20mm will be used.
-   *
-   *   O #  Ooooze      How much your nozzle will Ooooze filament while getting in position to print. This
-   *                    is over kill, but using this parameter will let you get the very first 'circle' perfect
-   *                    so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
-   *                    Mesh calibrated. If not specified, a filament length of .3mm is assumed.
-   *
-   *   P #  Prime       Prime the nozzle with specified length of filament. If this parameter is not
-   *                    given, no prime action will take place. If the parameter specifies an amount, that much
-   *                    will be purged before continuing. If no amount is specified the command will start
-   *                    purging filament until the user provides an LCD Click and then it will continue with
-   *                    printing the Mesh. You can carefully remove the spent filament with a needle nose
-   *                    pliers while holding the LCD Click wheel in a depressed state. If you do not have
-   *                    an LCD, you must specify a value if you use P.
-   *
-   *   Q #  Multiplier  Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
-   *                    un-retraction is at 1.2mm   These numbers will be scaled by the specified amount
-   *
-   *   R #  Repeat      Prints the number of patterns given as a parameter, starting at the current location.
-   *                    If a parameter isn't given, every point will be printed unless G26 is interrupted.
-   *                    This works the same way that the UBL G29 P4 R parameter works.
-   *
-   *                    NOTE:  If you do not have an LCD, you -must- specify R. This is to ensure that you are
-   *                    aware that there's some risk associated with printing without the ability to abort in
-   *                    cases where mesh point Z value may be inaccurate. As above, if you do not include a
-   *                    parameter, every point will be printed.
-   *
-   *   S #  Nozzle      Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed.
-   *
-   *   U #  Random      Randomize the order that the circles are drawn on the bed. The search for the closest
-   *                    undrawn cicle is still done. But the distance to the location for each circle has a
-   *                    random number of the size specified added to it. Specifying S50 will give an interesting
-   *                    deviation from the normal behaviour on a 10 x 10 Mesh.
-   *
-   *   X #  X Coord.    Specify the starting location of the drawing activity.
-   *
-   *   Y #  Y Coord.    Specify the starting location of the drawing activity.
-   */
-
-  // External references
-
-  extern float feedrate_mm_s; // must set before calling prepare_move_to_destination
-  extern Planner planner;
-  #if ENABLED(ULTRA_LCD)
-    extern char lcd_status_message[];
-  #endif
-  extern float destination[XYZE];
-  void set_destination_to_current();
-  void prepare_move_to_destination();
-  #if AVR_AT90USB1286_FAMILY  // Teensyduino & Printrboard IDE extensions have compile errors without this
-    inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); }
-    inline void set_current_to_destination() { COPY(current_position, destination); }
-  #else
-    void sync_plan_position_e();
-    void set_current_to_destination();
-  #endif
-  #if ENABLED(NEWPANEL)
-    void lcd_setstatusPGM(const char* const message, const int8_t level);
-    void chirp_at_user();
-  #endif
-
-  // Private functions
-
-  static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16];
-  float g26_e_axis_feedrate = 0.020,
-        random_deviation = 0.0;
-
-  static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
-                                     // retracts/recovers won't result in a bad state.
-
-  float valid_trig_angle(float);
-
-  float unified_bed_leveling::g26_extrusion_multiplier,
-        unified_bed_leveling::g26_retraction_multiplier,
-        unified_bed_leveling::g26_nozzle,
-        unified_bed_leveling::g26_filament_diameter,
-        unified_bed_leveling::g26_layer_height,
-        unified_bed_leveling::g26_prime_length,
-        unified_bed_leveling::g26_x_pos,
-        unified_bed_leveling::g26_y_pos,
-        unified_bed_leveling::g26_ooze_amount;
-
-  int16_t unified_bed_leveling::g26_bed_temp,
-          unified_bed_leveling::g26_hotend_temp;
-
-  int8_t unified_bed_leveling::g26_prime_flag;
-
-  bool unified_bed_leveling::g26_continue_with_closest,
-       unified_bed_leveling::g26_keep_heaters_on;
-
-  int16_t unified_bed_leveling::g26_repeats;
-
-  void unified_bed_leveling::G26_line_to_destination(const float &feed_rate) {
-    const float save_feedrate = feedrate_mm_s;
-    feedrate_mm_s = feed_rate;      // use specified feed rate
-    prepare_move_to_destination();  // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_DELTA
-    feedrate_mm_s = save_feedrate;  // restore global feed rate
-  }
-
-  #if ENABLED(NEWPANEL)
-    /**
-     * Detect ubl_lcd_clicked, debounce it, and return true for cancel
-     */
-    bool user_canceled() {
-      if (!ubl_lcd_clicked()) return false;
-      safe_delay(10);                       // Wait for click to settle
-
-      #if ENABLED(ULTRA_LCD)
-        lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
-        lcd_quick_feedback();
-      #endif
-
-      while (!ubl_lcd_clicked()) idle();    // Wait for button release
-
-      // If the button is suddenly pressed again,
-      // ask the user to resolve the issue
-      lcd_setstatusPGM(PSTR("Release button"), 99); // will never appear...
-      while (ubl_lcd_clicked()) idle();             // unless this loop happens
-      lcd_reset_status();
-
-      return true;
-    }
-  #endif
-
-  /**
-   * G26: Mesh Validation Pattern generation.
-   *
-   * Used to interactively edit UBL's Mesh by placing the
-   * nozzle in a problem area and doing a G29 P4 R command.
-   */
-  void unified_bed_leveling::G26() {
-    SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s).");
-    float tmp, start_angle, end_angle;
-    int   i, xi, yi;
-    mesh_index_pair location;
-
-    // Don't allow Mesh Validation without homing first,
-    // or if the parameter parsing did not go OK, abort
-    if (axis_unhomed_error() || parse_G26_parameters()) return;
-
-    if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
-      do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
-      stepper.synchronize();
-      set_current_to_destination();
-    }
-
-    if (turn_on_heaters()) goto LEAVE;
-
-    current_position[E_AXIS] = 0.0;
-    sync_plan_position_e();
-
-    if (g26_prime_flag && prime_nozzle()) goto LEAVE;
-
-    /**
-     *  Bed is preheated
-     *
-     *  Nozzle is at temperature
-     *
-     *  Filament is primed!
-     *
-     *  It's  "Show Time" !!!
-     */
-
-    ZERO(circle_flags);
-    ZERO(horizontal_mesh_line_flags);
-    ZERO(vertical_mesh_line_flags);
-
-    // Move nozzle to the specified height for the first layer
-    set_destination_to_current();
-    destination[Z_AXIS] = g26_layer_height;
-    move_to(destination, 0.0);
-    move_to(destination, g26_ooze_amount);
-
-    has_control_of_lcd_panel = true;
-    //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
-
-    /**
-     * Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten
-     * the CPU load and make the arc drawing faster and more smooth
-     */
-    float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1];
-    for (i = 0; i <= 360 / 30; i++) {
-      cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0)));
-      sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0)));
-    }
-
-    do {
-      location = g26_continue_with_closest
-        ? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS])
-        : find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now.
-
-      if (location.x_index >= 0 && location.y_index >= 0) {
-        const float circle_x = mesh_index_to_xpos(location.x_index),
-                    circle_y = mesh_index_to_ypos(location.y_index);
-
-        // If this mesh location is outside the printable_radius, skip it.
-
-        if (!position_is_reachable_raw_xy(circle_x, circle_y)) continue;
-
-        xi = location.x_index;  // Just to shrink the next few lines and make them easier to understand
-        yi = location.y_index;
-
-        if (g26_debug_flag) {
-          SERIAL_ECHOPAIR("   Doing circle at: (xi=", xi);
-          SERIAL_ECHOPAIR(", yi=", yi);
-          SERIAL_CHAR(')');
-          SERIAL_EOL();
-        }
-
-        start_angle = 0.0;    // assume it is going to be a full circle
-        end_angle   = 360.0;
-        if (xi == 0) {       // Check for bottom edge
-          start_angle = -90.0;
-          end_angle   =  90.0;
-          if (yi == 0)        // it is an edge, check for the two left corners
-            start_angle = 0.0;
-          else if (yi == GRID_MAX_POINTS_Y - 1)
-            end_angle = 0.0;
-        }
-        else if (xi == GRID_MAX_POINTS_X - 1) { // Check for top edge
-          start_angle =  90.0;
-          end_angle   = 270.0;
-          if (yi == 0)                  // it is an edge, check for the two right corners
-            end_angle = 180.0;
-          else if (yi == GRID_MAX_POINTS_Y - 1)
-            start_angle = 180.0;
-        }
-        else if (yi == 0) {
-          start_angle =   0.0;         // only do the top   side of the cirlce
-          end_angle   = 180.0;
-        }
-        else if (yi == GRID_MAX_POINTS_Y - 1) {
-          start_angle = 180.0;         // only do the bottom side of the cirlce
-          end_angle   = 360.0;
-        }
-
-        for (tmp = start_angle; tmp < end_angle - 0.1; tmp += 30.0) {
-
-          #if ENABLED(NEWPANEL)
-            if (user_canceled()) goto LEAVE;              // Check if the user wants to stop the Mesh Validation
-          #endif
-
-          int tmp_div_30 = tmp / 30.0;
-          if (tmp_div_30 < 0) tmp_div_30 += 360 / 30;
-          if (tmp_div_30 > 11) tmp_div_30 -= 360 / 30;
-
-          float x = circle_x + cos_table[tmp_div_30],    // for speed, these are now a lookup table entry
-                y = circle_y + sin_table[tmp_div_30],
-                xe = circle_x + cos_table[tmp_div_30 + 1],
-                ye = circle_y + sin_table[tmp_div_30 + 1];
-          #if IS_KINEMATIC
-            // Check to make sure this segment is entirely on the bed, skip if not.
-            if (!position_is_reachable_raw_xy(x, y) || !position_is_reachable_raw_xy(xe, ye)) continue;
-          #else                                              // not, we need to skip
-            x  = constrain(x, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
-            y  = constrain(y, Y_MIN_POS + 1, Y_MAX_POS - 1);
-            xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
-            ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1);
-          #endif
-
-          //if (g26_debug_flag) {
-          //  char ccc, *cptr, seg_msg[50], seg_num[10];
-          //  strcpy(seg_msg, "   segment: ");
-          //  strcpy(seg_num, "    \n");
-          //  cptr = (char*) "01234567890ABCDEF????????";
-          //  ccc = cptr[tmp_div_30];
-          //  seg_num[1] = ccc;
-          //  strcat(seg_msg, seg_num);
-          //  debug_current_and_destination(seg_msg);
-          //}
-
-          print_line_from_here_to_there(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y), g26_layer_height, LOGICAL_X_POSITION(xe), LOGICAL_Y_POSITION(ye), g26_layer_height);
-
-        }
-        if (look_for_lines_to_connect())
-          goto LEAVE;
-      }
-    } while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
-
-    LEAVE:
-    lcd_setstatusPGM(PSTR("Leaving G26"), -1);
-
-    retract_filament(destination);
-    destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;
-
-    //debug_current_and_destination(PSTR("ready to do Z-Raise."));
-    move_to(destination, 0); // Raise the nozzle
-    //debug_current_and_destination(PSTR("done doing Z-Raise."));
-
-    destination[X_AXIS] = g26_x_pos;                                               // Move back to the starting position
-    destination[Y_AXIS] = g26_y_pos;
-    //destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;                        // Keep the nozzle where it is
-
-    move_to(destination, 0); // Move back to the starting position
-    //debug_current_and_destination(PSTR("done doing X/Y move."));
-
-    has_control_of_lcd_panel = false;     // Give back control of the LCD Panel!
-
-    if (!g26_keep_heaters_on) {
-      #if HAS_TEMP_BED
-        thermalManager.setTargetBed(0);
-      #endif
-      thermalManager.setTargetHotend(0, 0);
-    }
-  }
-
-  float valid_trig_angle(float d) {
-    while (d > 360.0) d -= 360.0;
-    while (d < 0.0) d += 360.0;
-    return d;
-  }
-
-  mesh_index_pair unified_bed_leveling::find_closest_circle_to_print(const float &X, const float &Y) {
-    float closest = 99999.99;
-    mesh_index_pair return_val;
-
-    return_val.x_index = return_val.y_index = -1;
-
-    for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
-      for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
-        if (!is_bit_set(circle_flags, i, j)) {
-          const float mx = mesh_index_to_xpos(i),  // We found a circle that needs to be printed
-                      my = mesh_index_to_ypos(j);
-
-          // Get the distance to this intersection
-          float f = HYPOT(X - mx, Y - my);
-
-          // It is possible that we are being called with the values
-          // to let us find the closest circle to the start position.
-          // But if this is not the case, add a small weighting to the
-          // distance calculation to help it choose a better place to continue.
-          f += HYPOT(g26_x_pos - mx, g26_y_pos - my) / 15.0;
-
-          // Add in the specified amount of Random Noise to our search
-          if (random_deviation > 1.0)
-            f += random(0.0, random_deviation);
-
-          if (f < closest) {
-            closest = f;              // We found a closer location that is still
-            return_val.x_index = i;   // un-printed  --- save the data for it
-            return_val.y_index = j;
-            return_val.distance = closest;
-          }
-        }
-      }
-    }
-    bit_set(circle_flags, return_val.x_index, return_val.y_index);   // Mark this location as done.
-    return return_val;
-  }
-
-  bool unified_bed_leveling::look_for_lines_to_connect() {
-    float sx, sy, ex, ey;
-
-    for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
-      for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
-
-        #if ENABLED(NEWPANEL)
-          if (user_canceled()) return true;     // Check if the user wants to stop the Mesh Validation
-        #endif
-
-        if (i < GRID_MAX_POINTS_X) { // We can't connect to anything to the right than GRID_MAX_POINTS_X.
-                                     // This is already a half circle because we are at the edge of the bed.
-
-          if (is_bit_set(circle_flags, i, j) && is_bit_set(circle_flags, i + 1, j)) { // check if we can do a line to the left
-            if (!is_bit_set(horizontal_mesh_line_flags, i, j)) {
-
-              //
-              // We found two circles that need a horizontal line to connect them
-              // Print it!
-              //
-              sx = mesh_index_to_xpos(  i  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge
-              ex = mesh_index_to_xpos(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge
-
-              sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1);
-              sy = ey = constrain(mesh_index_to_ypos(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
-              ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1);
-
-              if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
-
-                if (g26_debug_flag) {
-                  SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
-                  SERIAL_ECHOPAIR(", sy=", sy);
-                  SERIAL_ECHOPAIR(") -> (ex=", ex);
-                  SERIAL_ECHOPAIR(", ey=", ey);
-                  SERIAL_CHAR(')');
-                  SERIAL_EOL();
-                  //debug_current_and_destination(PSTR("Connecting horizontal line."));
-                }
-
-                print_line_from_here_to_there(LOGICAL_X_POSITION(sx), LOGICAL_Y_POSITION(sy), g26_layer_height, LOGICAL_X_POSITION(ex), LOGICAL_Y_POSITION(ey), g26_layer_height);
-              }
-              bit_set(horizontal_mesh_line_flags, i, j);   // Mark it as done so we don't do it again, even if we skipped it
-            }
-          }
-
-          if (j < GRID_MAX_POINTS_Y) { // We can't connect to anything further back than GRID_MAX_POINTS_Y.
-                                           // This is already a half circle because we are at the edge  of the bed.
-
-            if (is_bit_set(circle_flags, i, j) && is_bit_set(circle_flags, i, j + 1)) { // check if we can do a line straight down
-              if (!is_bit_set( vertical_mesh_line_flags, i, j)) {
-                //
-                // We found two circles that need a vertical line to connect them
-                // Print it!
-                //
-                sy = mesh_index_to_ypos(  j  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge
-                ey = mesh_index_to_ypos(j + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge
-
-                sx = ex = constrain(mesh_index_to_xpos(i), X_MIN_POS + 1, X_MAX_POS - 1);
-                sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
-                ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1);
-
-                if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
-
-                  if (g26_debug_flag) {
-                    SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx);
-                    SERIAL_ECHOPAIR(", sy=", sy);
-                    SERIAL_ECHOPAIR(") -> (ex=", ex);
-                    SERIAL_ECHOPAIR(", ey=", ey);
-                    SERIAL_CHAR(')');
-                    SERIAL_EOL();
-                    debug_current_and_destination(PSTR("Connecting vertical line."));
-                  }
-                  print_line_from_here_to_there(LOGICAL_X_POSITION(sx), LOGICAL_Y_POSITION(sy), g26_layer_height, LOGICAL_X_POSITION(ex), LOGICAL_Y_POSITION(ey), g26_layer_height);
-                }
-                bit_set(vertical_mesh_line_flags, i, j);   // Mark it as done so we don't do it again, even if skipped
-              }
-            }
-          }
-        }
-      }
-    }
-    return false;
-  }
-
-  void unified_bed_leveling::move_to(const float &x, const float &y, const float &z, const float &e_delta) {
-    float feed_value;
-    static float last_z = -999.99;
-
-    bool has_xy_component = (x != current_position[X_AXIS] || y != current_position[Y_AXIS]); // Check if X or Y is involved in the movement.
-
-    if (z != last_z) {
-      last_z = z;
-      feed_value = planner.max_feedrate_mm_s[Z_AXIS]/(3.0);  // Base the feed rate off of the configured Z_AXIS feed rate
-
-      destination[X_AXIS] = current_position[X_AXIS];
-      destination[Y_AXIS] = current_position[Y_AXIS];
-      destination[Z_AXIS] = z;                          // We know the last_z==z or we wouldn't be in this block of code.
-      destination[E_AXIS] = current_position[E_AXIS];
-
-      G26_line_to_destination(feed_value);
-
-      stepper.synchronize();
-      set_destination_to_current();
-    }
-
-    // Check if X or Y is involved in the movement.
-    // Yes: a 'normal' movement. No: a retract() or recover()
-    feed_value = has_xy_component ? PLANNER_XY_FEEDRATE() / 10.0 : planner.max_feedrate_mm_s[E_AXIS] / 1.5;
-
-    if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value);
-
-    destination[X_AXIS] = x;
-    destination[Y_AXIS] = y;
-    destination[E_AXIS] += e_delta;
-
-    G26_line_to_destination(feed_value);
-
-    stepper.synchronize();
-    set_destination_to_current();
-
-  }
-
-  void unified_bed_leveling::retract_filament(const float where[XYZE]) {
-    if (!g26_retracted) { // Only retract if we are not already retracted!
-      g26_retracted = true;
-      move_to(where, -1.0 * g26_retraction_multiplier);
-    }
-  }
-
-  void unified_bed_leveling::recover_filament(const float where[XYZE]) {
-    if (g26_retracted) { // Only un-retract if we are retracted.
-      move_to(where, 1.2 * g26_retraction_multiplier);
-      g26_retracted = false;
-    }
-  }
-
-  /**
-   * print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one
-   * to the other. But there are really three sets of coordinates involved. The first coordinate
-   * is the present location of the nozzle. We don't necessarily want to print from this location.
-   * We first need to move the nozzle to the start of line segment where we want to print. Once
-   * there, we can use the two coordinates supplied to draw the line.
-   *
-   * Note:  Although we assume the first set of coordinates is the start of the line and the second
-   * set of coordinates is the end of the line, it does not always work out that way. This function
-   * optimizes the movement to minimize the travel distance before it can start printing. This saves
-   * a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does
-   * cause a lot of very little short retracement of th nozzle when it draws the very first line
-   * segment of a 'circle'. The time this requires is very short and is easily saved by the other
-   * cases where the optimization comes into play.
-   */
-  void unified_bed_leveling::print_line_from_here_to_there(const float &sx, const float &sy, const float &sz, const float &ex, const float &ey, const float &ez) {
-    const float dx_s = current_position[X_AXIS] - sx,   // find our distance from the start of the actual line segment
-                dy_s = current_position[Y_AXIS] - sy,
-                dist_start = HYPOT2(dx_s, dy_s),        // We don't need to do a sqrt(), we can compare the distance^2
-                                                        // to save computation time
-                dx_e = current_position[X_AXIS] - ex,   // find our distance from the end of the actual line segment
-                dy_e = current_position[Y_AXIS] - ey,
-                dist_end = HYPOT2(dx_e, dy_e),
-
-                line_length = HYPOT(ex - sx, ey - sy);
-
-    // If the end point of the line is closer to the nozzle, flip the direction,
-    // moving from the end to the start. On very small lines the optimization isn't worth it.
-    if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length)) {
-      return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
-    }
-
-    // Decide whether to retract & bump
-
-    if (dist_start > 2.0) {
-      retract_filament(destination);
-      //todo:  parameterize the bump height with a define
-      move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0);  // Z bump to minimize scraping
-      move_to(sx, sy, sz + 0.500, 0.0); // Get to the starting point with no extrusion while bumped
-    }
-
-    move_to(sx, sy, sz, 0.0); // Get to the starting point with no extrusion / un-Z bump
-
-    const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier;
-
-    recover_filament(destination);
-    move_to(ex, ey, ez, e_pos_delta);  // Get to the ending point with an appropriate amount of extrusion
-  }
-
-  /**
-   * This function used to be inline code in G26. But there are so many
-   * parameters it made sense to turn them into static globals and get
-   * this code out of sight of the main routine.
-   */
-  bool unified_bed_leveling::parse_G26_parameters() {
-
-    g26_extrusion_multiplier  = EXTRUSION_MULTIPLIER;
-    g26_retraction_multiplier = RETRACTION_MULTIPLIER;
-    g26_nozzle                = NOZZLE;
-    g26_filament_diameter     = FILAMENT;
-    g26_layer_height          = LAYER_HEIGHT;
-    g26_prime_length          = PRIME_LENGTH;
-    g26_bed_temp              = BED_TEMP;
-    g26_hotend_temp           = HOTEND_TEMP;
-    g26_prime_flag            = 0;
-
-    g26_ooze_amount           = parser.linearval('O', OOZE_AMOUNT);
-    g26_keep_heaters_on       = parser.boolval('K');
-    g26_continue_with_closest = parser.boolval('C');
-
-    if (parser.seenval('B')) {
-      g26_bed_temp = parser.value_celsius();
-      if (!WITHIN(g26_bed_temp, 15, 140)) {
-        SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible.");
-        return UBL_ERR;
-      }
-    }
-
-    if (parser.seenval('L')) {
-      g26_layer_height = parser.value_linear_units();
-      if (!WITHIN(g26_layer_height, 0.0, 2.0)) {
-        SERIAL_PROTOCOLLNPGM("?Specified layer height not plausible.");
-        return UBL_ERR;
-      }
-    }
-
-    if (parser.seen('Q')) {
-      if (parser.has_value()) {
-        g26_retraction_multiplier = parser.value_float();
-        if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) {
-          SERIAL_PROTOCOLLNPGM("?Specified Retraction Multiplier not plausible.");
-          return UBL_ERR;
-        }
-      }
-      else {
-        SERIAL_PROTOCOLLNPGM("?Retraction Multiplier must be specified.");
-        return UBL_ERR;
-      }
-    }
-
-    if (parser.seenval('S')) {
-      g26_nozzle = parser.value_float();
-      if (!WITHIN(g26_nozzle, 0.1, 1.0)) {
-        SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible.");
-        return UBL_ERR;
-      }
-    }
-
-    if (parser.seen('P')) {
-      if (!parser.has_value()) {
-        #if ENABLED(NEWPANEL)
-          g26_prime_flag = -1;
-        #else
-          SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD.");
-          return UBL_ERR;
-        #endif
-      }
-      else {
-        g26_prime_flag++;
-        g26_prime_length = parser.value_linear_units();
-        if (!WITHIN(g26_prime_length, 0.0, 25.0)) {
-          SERIAL_PROTOCOLLNPGM("?Specified prime length not plausible.");
-          return UBL_ERR;
-        }
-      }
-    }
-
-    if (parser.seenval('F')) {
-      g26_filament_diameter = parser.value_linear_units();
-      if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) {
-        SERIAL_PROTOCOLLNPGM("?Specified filament size not plausible.");
-        return UBL_ERR;
-      }
-    }
-    g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to
-                                                                      // scale up or down the length needed to get the
-                                                                      // same volume of filament
-
-    g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
-
-    if (parser.seenval('H')) {
-      g26_hotend_temp = parser.value_celsius();
-      if (!WITHIN(g26_hotend_temp, 165, 280)) {
-        SERIAL_PROTOCOLLNPGM("?Specified nozzle temperature not plausible.");
-        return UBL_ERR;
-      }
-    }
-
-    if (parser.seen('U')) {
-      randomSeed(millis());
-      // This setting will persist for the next G26
-      random_deviation = parser.has_value() ? parser.value_float() : 50.0;
-    }
-
-    #if ENABLED(NEWPANEL)
-      g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
-    #else
-      if (!parser.seen('R')) {
-        SERIAL_PROTOCOLLNPGM("?(R)epeat must be specified when not using an LCD.");
-        return UBL_ERR;
-      }
-      else
-        g26_repeats = parser.has_value() ? parser.value_int() : GRID_MAX_POINTS + 1;
-    #endif
-    if (g26_repeats < 1) {
-      SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be at least 1.");
-      return UBL_ERR;
-    }
-
-    g26_x_pos = parser.linearval('X', current_position[X_AXIS]);
-    g26_y_pos = parser.linearval('Y', current_position[Y_AXIS]);
-    if (!position_is_reachable_xy(g26_x_pos, g26_y_pos)) {
-      SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
-      return UBL_ERR;
-    }
-
-    /**
-     * Wait until all parameters are verified before altering the state!
-     */
-    set_bed_leveling_enabled(!parser.seen('D'));
-
-    return UBL_OK;
-  }
-
-  #if ENABLED(NEWPANEL)
-    bool unified_bed_leveling::exit_from_g26() {
-      lcd_setstatusPGM(PSTR("Leaving G26"), -1);
-      while (ubl_lcd_clicked()) idle();
-      return UBL_ERR;
-    }
-  #endif
-
-  /**
-   * Turn on the bed and nozzle heat and
-   * wait for them to get up to temperature.
-   */
-  bool unified_bed_leveling::turn_on_heaters() {
-    millis_t next = millis() + 5000UL;
-    #if HAS_TEMP_BED
-      #if ENABLED(ULTRA_LCD)
-        if (g26_bed_temp > 25) {
-          lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99);
-          lcd_quick_feedback();
-      #endif
-          has_control_of_lcd_panel = true;
-          thermalManager.setTargetBed(g26_bed_temp);
-          while (abs(thermalManager.degBed() - g26_bed_temp) > 3) {
-
-            #if ENABLED(NEWPANEL)
-              if (ubl_lcd_clicked()) return exit_from_g26();
-            #endif
-
-            if (ELAPSED(millis(), next)) {
-              next = millis() + 5000UL;
-              print_heaterstates();
-              SERIAL_EOL();
-            }
-            idle();
-          }
-      #if ENABLED(ULTRA_LCD)
-        }
-        lcd_setstatusPGM(PSTR("G26 Heating Nozzle."), 99);
-        lcd_quick_feedback();
-      #endif
-    #endif
-
-    // Start heating the nozzle and wait for it to reach temperature.
-    thermalManager.setTargetHotend(g26_hotend_temp, 0);
-    while (abs(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
-
-      #if ENABLED(NEWPANEL)
-        if (ubl_lcd_clicked()) return exit_from_g26();
-      #endif
-
-      if (ELAPSED(millis(), next)) {
-        next = millis() + 5000UL;
-        print_heaterstates();
-        SERIAL_EOL();
-      }
-      idle();
-    }
-
-    #if ENABLED(ULTRA_LCD)
-      lcd_reset_status();
-      lcd_quick_feedback();
-    #endif
-
-    return UBL_OK;
-  }
-
-  /**
-   * Prime the nozzle if needed. Return true on error.
-   */
-  bool unified_bed_leveling::prime_nozzle() {
-
-    #if ENABLED(NEWPANEL)
-      float Total_Prime = 0.0;
-
-      if (g26_prime_flag == -1) {  // The user wants to control how much filament gets purged
-
-        has_control_of_lcd_panel = true;
-        lcd_setstatusPGM(PSTR("User-Controlled Prime"), 99);
-        chirp_at_user();
-
-        set_destination_to_current();
-
-        recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
-
-        while (!ubl_lcd_clicked()) {
-          chirp_at_user();
-          destination[E_AXIS] += 0.25;
-          #ifdef PREVENT_LENGTHY_EXTRUDE
-            Total_Prime += 0.25;
-            if (Total_Prime >= EXTRUDE_MAXLENGTH) return UBL_ERR;
-          #endif
-          G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
-
-          stepper.synchronize();    // Without this synchronize, the purge is more consistent,
-                                    // but because the planner has a buffer, we won't be able
-                                    // to stop as quickly. So we put up with the less smooth
-                                    // action to give the user a more responsive 'Stop'.
-          set_destination_to_current();
-          idle();
-        }
-
-        while (ubl_lcd_clicked()) idle();           // Debounce Encoder Wheel
-
-        #if ENABLED(ULTRA_LCD)
-          strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue;
-                                                              // So... We cheat to get a message up.
-          lcd_setstatusPGM(PSTR("Done Priming"), 99);
-          lcd_quick_feedback();
-        #endif
-
-        has_control_of_lcd_panel = false;
-
-      }
-      else {
-    #else
-    {
-    #endif
-      #if ENABLED(ULTRA_LCD)
-        lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99);
-        lcd_quick_feedback();
-      #endif
-      set_destination_to_current();
-      destination[E_AXIS] += g26_prime_length;
-      G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
-      stepper.synchronize();
-      set_destination_to_current();
-      retract_filament(destination);
-    }
-
-    return UBL_OK;
-  }
-
-#endif // AUTO_BED_LEVELING_UBL && UBL_G26_MESH_VALIDATION

Marlin/Makefile

@@ -1,9 +1,10 @@
-# Sprinter Arduino Project Makefile
+# Marlin Firmware Arduino Project Makefile
 #
 # Makefile Based on:
 # Arduino 0011 Makefile
 # Arduino adaptation by mellis, eighthave, oli.keller
 # Marlin adaption by Daid
+# Marlin 2.0 support and RELOC_WORKAROUND by @marcio-ao
 #
 # This has been tested with Arduino 0022.
 #
@@ -63,6 +64,9 @@ HARDWARE_MOTHERBOARD ?= 11
 ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
 ARDUINO_VERSION      ?= 106
 
+# The installed Libraries are in the User folder
+ARDUINO_USER_DIR ?= ${HOME}/Arduino
+
 # You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
 AVR_TOOLS_PATH ?=
 
@@ -85,9 +89,22 @@ WIRE               ?= 0
 # this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
 U8GLIB             ?= 1
 
-# this defines whether to add a workaround for the avr-gcc relocation bug
-#	  https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround
-RELOC_WORKAROUND   ?= 1
+# this defines whether to include the Trinamic TMCStepper library
+TMC                ?= 1
+
+############
+# Try to automatically determine whether RELOC_WORKAROUND is needed based
+# on GCC versions:
+#   http://www.avrfreaks.net/comment/1789106#comment-1789106
+
+CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
+CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
+CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
+CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
+ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
+  @echo This version of GCC is likely broken. Enabling relocation workaround.
+  RELOC_WORKAROUND = 1
+endif
 
 ############################################################################
 # Below here nothing should be changed...
@@ -96,153 +113,352 @@ RELOC_WORKAROUND   ?= 1
 # HARDWARE_VARIANT = "arduino", "Sanguino", "Gen7", ...
 # MCU = "atmega1280", "Mega2560", "atmega2560", "atmega644p", ...
 
-#Gen7
-ifeq ($(HARDWARE_MOTHERBOARD),10)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega644
-F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),11)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega644p
-F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),12)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega644p
-F_CPU            ?= 20000000
-else ifeq  ($(HARDWARE_MOTHERBOARD),13)
-HARDWARE_VARIANT ?= Gen7
-MCU              ?= atmega1284p
-F_CPU            ?= 20000000
+ifeq ($(HARDWARE_MOTHERBOARD),0)
 
-#RAMPS
-else ifeq  ($(HARDWARE_MOTHERBOARD),3)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),33)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),34)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),35)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),36)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),38)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),43)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),44)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),45)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),46)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),48)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+  # No motherboard selected
 
-#Gen6
-else ifeq  ($(HARDWARE_MOTHERBOARD),5)
-HARDWARE_VARIANT ?= Gen6
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),51)
-HARDWARE_VARIANT ?= Gen6
-MCU              ?= atmega644p
+#
+# RAMPS 1.3 / 1.4 - ATmega1280, ATmega2560
+#
 
-#Sanguinololu
-else ifeq  ($(HARDWARE_MOTHERBOARD),6)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),62)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),63)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
-else ifeq  ($(HARDWARE_MOTHERBOARD),65)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),66)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
-else ifeq  ($(HARDWARE_MOTHERBOARD),69)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega1284p
+# MEGA/RAMPS up to 1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),1000)
 
-#Ultimaker
-else ifeq  ($(HARDWARE_MOTHERBOARD),7)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),71)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega1280
+# RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1010)
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1011)
+# RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1012)
+# RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1013)
+# RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1014)
 
-#Teensylu
-else ifeq  ($(HARDWARE_MOTHERBOARD),8)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),81)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),811)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),82)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb646
-else ifeq  ($(HARDWARE_MOTHERBOARD),83)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
-else ifeq  ($(HARDWARE_MOTHERBOARD),84)
-HARDWARE_VARIANT ?= Teensy
-MCU              ?= at90usb1286
+# RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1020)
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1021)
+# RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1022)
+# RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1023)
+# RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1024)
 
-#Gen3+
-else ifeq  ($(HARDWARE_MOTHERBOARD),9)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1030)
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1031)
+# RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1032)
+# RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1033)
+# RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1034)
 
-#Gen3 Monolithic Electronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),22)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
+#
+# RAMPS Derivatives - ATmega1280, ATmega2560
+#
 
-#Megatronics
-else ifeq  ($(HARDWARE_MOTHERBOARD),70)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+# 3Drag Controller
+else ifeq ($(HARDWARE_MOTHERBOARD),1100)
+# Velleman K8200 Controller (derived from 3Drag Controller)
+else ifeq ($(HARDWARE_MOTHERBOARD),1101)
+# Velleman K8400 Controller (derived from 3Drag Controller)
+else ifeq ($(HARDWARE_MOTHERBOARD),1102)
+# 2PrintBeta BAM&DICE with STK drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),1103)
+# 2PrintBeta BAM&DICE Due with STK drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),1104)
+# MKS BASE v1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1105)
+# MKS v1.4 with A4982 stepper drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),1106)
+# MKS v1.5 with Allegro A4982 stepper drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),1107)
+# MKS BASE 1.0 with Heroic HR4982 stepper drivers
+else ifeq ($(HARDWARE_MOTHERBOARD),1108)
+# MKS GEN v1.3 or 1.4
+else ifeq ($(HARDWARE_MOTHERBOARD),1109)
+# MKS GEN L
+else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+# zrib V2.0 control board (Chinese knock off RAMPS replica)
+else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+# Bigtreetech or BIQU KFB2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1112)
+# Felix 2.0+ Electronics Board (RAMPS like)
+else ifeq ($(HARDWARE_MOTHERBOARD),1113)
+# Invent-A-Part RigidBoard
+else ifeq ($(HARDWARE_MOTHERBOARD),1114)
+# Invent-A-Part RigidBoard V2
+else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+# Sainsmart 2-in-1 board
+else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+# Ultimaker
+else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+  MCU ?= atmega1280
 
-#Alpha OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),90)
-HARDWARE_VARIANT ?= SanguinoA
-MCU              ?= atmega644
+# Azteeg X3
+else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+# Azteeg X3 Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+# Rumba
+else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+# Raise3D Rumba
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
+# Rapide Lite RL200 Rumba
+else ifeq ($(HARDWARE_MOTHERBOARD),1124)
+# Formbot T-Rex 2 Plus
+else ifeq ($(HARDWARE_MOTHERBOARD),1125)
+# Formbot T-Rex 3
+else ifeq ($(HARDWARE_MOTHERBOARD),1126)
+# Formbot Raptor
+else ifeq ($(HARDWARE_MOTHERBOARD),1127)
+# Formbot Raptor 2
+else ifeq ($(HARDWARE_MOTHERBOARD),1128)
+# bq ZUM Mega 3D
+else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
+else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+# TriGorilla Anycubic version 1.3 based on RAMPS EFB
+else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+# TriGorilla Anycubic version 1.4 based on RAMPS EFB
+else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+# TriGorilla Anycubic version 1.4 Rev 1.1
+else ifeq ($(HARDWARE_MOTHERBOARD),1133)
+# Creality: Ender-4, CR-8
+else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+# Creality: CR10S, CR20, CR-X
+else ifeq ($(HARDWARE_MOTHERBOARD),1135)
+# Dagoma F5
+else ifeq ($(HARDWARE_MOTHERBOARD),1136)
+# Fysetc F6
+else ifeq ($(HARDWARE_MOTHERBOARD),1137)
+# Duplicator i3 Plus
+else ifeq ($(HARDWARE_MOTHERBOARD),1138)
+# VORON
+else ifeq ($(HARDWARE_MOTHERBOARD),1139)
+# TRONXY V3 1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1140)
+# Z-Bolt X Series
+else ifeq ($(HARDWARE_MOTHERBOARD),1141)
 
-#Final OMCA board
-else ifeq  ($(HARDWARE_MOTHERBOARD),91)
-HARDWARE_VARIANT ?= Sanguino
-MCU              ?= atmega644p
+#
+# Other ATmega1280, ATmega2560
+#
 
-#Rambo
-else ifeq  ($(HARDWARE_MOTHERBOARD),301)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+# Cartesio CN Controls V11
+else ifeq ($(HARDWARE_MOTHERBOARD),1200)
+# Cartesio CN Controls V12
+else ifeq ($(HARDWARE_MOTHERBOARD),1201)
+# Cheaptronic v1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1202)
+# Cheaptronic v2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1203)
+# Makerbot Mightyboard Revision E
+else ifeq ($(HARDWARE_MOTHERBOARD),1204)
+# Megatronics
+else ifeq ($(HARDWARE_MOTHERBOARD),1205)
+# Megatronics v2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1206)
+# Megatronics v3.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1207)
+# Megatronics v3.1
+else ifeq ($(HARDWARE_MOTHERBOARD),1208)
+# Megatronics v3.2
+else ifeq ($(HARDWARE_MOTHERBOARD),1209)
+# Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1210)
+# Mini-Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1211)
+# Mini-Rambo 1.0a
+else ifeq ($(HARDWARE_MOTHERBOARD),1212)
+# Einsy Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),1213)
+# Einsy Retro
+else ifeq ($(HARDWARE_MOTHERBOARD),1214)
+# Elefu Ra Board (v3)
+else ifeq ($(HARDWARE_MOTHERBOARD),1215)
+# Leapfrog
+else ifeq ($(HARDWARE_MOTHERBOARD),1216)
+# Mega controller
+else ifeq ($(HARDWARE_MOTHERBOARD),1217)
+# abee Scoovo X9H
+else ifeq ($(HARDWARE_MOTHERBOARD),1218)
+# Geeetech GT2560 Rev B for Mecreator2
+else ifeq ($(HARDWARE_MOTHERBOARD),1219)
+# Geeetech GT2560 Rev. A
+else ifeq ($(HARDWARE_MOTHERBOARD),1220)
+# Geeetech GT2560 Rev. A+ (with auto level probe)
+else ifeq ($(HARDWARE_MOTHERBOARD),1221)
+# Geeetech GT2560 Rev B for A10(M/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1222)
+# Geeetech GT2560 Rev B for A20(M/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1223)
+# Einstart retrofit
+else ifeq ($(HARDWARE_MOTHERBOARD),1224)
 
-# Azteeg
-else ifeq  ($(HARDWARE_MOTHERBOARD),67)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
-else ifeq  ($(HARDWARE_MOTHERBOARD),68)
-HARDWARE_VARIANT ?= arduino
-MCU              ?= atmega2560
+#
+# ATmega1281, ATmega2561
+#
 
+else ifeq ($(HARDWARE_MOTHERBOARD),1300)
+  MCU              ?= atmega1281
+else ifeq ($(HARDWARE_MOTHERBOARD),1310)
+  MCU              ?= atmega1281
+
+#
+# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
+#
+
+# Sanguinololu < 1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),1400)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Sanguinololu 1.2 and above
+else ifeq ($(HARDWARE_MOTHERBOARD),1401)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Melzi
+else ifeq ($(HARDWARE_MOTHERBOARD),1402)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Melzi with ATmega1284 (MaKr3d version)
+else ifeq ($(HARDWARE_MOTHERBOARD),1403)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# Melzi Creality3D board (for CR-10 etc)
+else ifeq ($(HARDWARE_MOTHERBOARD),1404)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# Melzi Malyan M150 board
+else ifeq ($(HARDWARE_MOTHERBOARD),1405)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# Tronxy X5S
+else ifeq ($(HARDWARE_MOTHERBOARD),1406)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# STB V1.1
+else ifeq ($(HARDWARE_MOTHERBOARD),1407)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# Azteeg X1
+else ifeq ($(HARDWARE_MOTHERBOARD),1408)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),1409)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+
+#
+# Other ATmega644P, ATmega644, ATmega1284P
+#
+
+# Gen3 Monolithic Electronics
+else ifeq ($(HARDWARE_MOTHERBOARD),1500)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Gen3+
+else ifeq ($(HARDWARE_MOTHERBOARD),1501)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Gen6
+else ifeq ($(HARDWARE_MOTHERBOARD),1502)
+  HARDWARE_VARIANT ?= Gen6
+  MCU              ?= atmega644p
+# Gen6 deluxe
+else ifeq ($(HARDWARE_MOTHERBOARD),1503)
+  HARDWARE_VARIANT ?= Gen6
+  MCU              ?= atmega644p
+# Gen7 custom (Alfons3 Version)
+else ifeq ($(HARDWARE_MOTHERBOARD),1504)
+  HARDWARE_VARIANT ?= Gen7
+  MCU              ?= atmega644
+  F_CPU            ?= 20000000
+# Gen7 v1.1, v1.2
+else ifeq ($(HARDWARE_MOTHERBOARD),1505)
+  HARDWARE_VARIANT ?= Gen7
+  MCU              ?= atmega644p
+  F_CPU            ?= 20000000
+# Gen7 v1.3
+else ifeq ($(HARDWARE_MOTHERBOARD),1506)
+  HARDWARE_VARIANT ?= Gen7
+  MCU              ?= atmega644p
+  F_CPU            ?= 20000000
+# Gen7 v1.4
+else ifeq ($(HARDWARE_MOTHERBOARD),1507)
+  HARDWARE_VARIANT ?= Gen7
+  MCU              ?= atmega1284p
+  F_CPU            ?= 20000000
+# Alpha OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),1508)
+  HARDWARE_VARIANT ?= SanguinoA
+  MCU              ?= atmega644
+# Final OMCA board
+else ifeq ($(HARDWARE_MOTHERBOARD),1509)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+# Sethi 3D_1
+else ifeq ($(HARDWARE_MOTHERBOARD),1510)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega644p
+
+#
+# Teensyduino - AT90USB1286, AT90USB1286P
+#
+
+# Teensylu
+else ifeq ($(HARDWARE_MOTHERBOARD),1600)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# Printrboard (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),1601)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# Printrboard Revision F (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),1602)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# Brainwave (AT90USB646)
+else ifeq ($(HARDWARE_MOTHERBOARD),1603)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb646
+# Brainwave Pro (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),1604)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# SAV Mk-I (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),1605)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# Teensy++2.0 (AT90USB1286)
+else ifeq ($(HARDWARE_MOTHERBOARD),1606)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+# 5DPrint D8 Driver Board
+else ifeq ($(HARDWARE_MOTHERBOARD),1607)
+  HARDWARE_VARIANT ?= Teensy
+  MCU              ?= at90usb1286
+
+# UltiMachine Archim1 (with DRV8825 drivers)
+else ifeq ($(HARDWARE_MOTHERBOARD),3023)
+  HARDWARE_VARIANT ?= archim
+  MCPU              = cortex-m3
+  F_CPU             = 84000000L
+  IS_MCU            = 0
+# UltiMachine Archim2 (with TMC2130 drivers)
+else ifeq ($(HARDWARE_MOTHERBOARD),3024)
+  HARDWARE_VARIANT ?= archim
+  MCPU              = cortex-m3
+  F_CPU             = 84000000L
+  IS_MCU            = 0
 endif
 
 # Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
@@ -250,6 +466,23 @@ endif
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
+# Set to microcontroller if IS_MCU not yet set
+IS_MCU ?= 1
+
+ifeq ($(IS_MCU),1)
+  # Set to arduino, ATmega2560 if not yet set.
+  HARDWARE_VARIANT ?= arduino
+  MCU ?= atmega2560
+
+  TOOL_PREFIX = avr
+  MCU_FLAGS   = -mmcu=$(MCU)
+  SIZE_FLAGS  = --mcu=$(MCU) -C
+else
+  TOOL_PREFIX = arm-none-eabi
+  CPU_FLAGS   = -mthumb -mcpu=$(MCPU)
+  SIZE_FLAGS  = -A
+endif
+
 # Arduino contained the main source code for the Arduino
 # Libraries, the "hardware variant" are for boards
 # that derives from that, and their source are present in
@@ -261,12 +494,27 @@ TARGET = $(notdir $(CURDIR))
 # there is no need to specify explicit pathnames as long as the
 # directory is added here
 
+# The Makefile for previous versions of Marlin used VPATH for all
+# source files, but for Marlin 2.0, we use VPATH only for arduino
+# library files.
+
 VPATH = .
 VPATH += $(BUILD_DIR)
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+VPATH += $(HARDWARE_SRC)
+
+ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
+endif
+
+ifeq ($(IS_MCU),1)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
+endif
 
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
 ifeq ($(LIQUID_TWI2), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
@@ -282,64 +530,90 @@ VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
 endif
 ifeq ($(U8GLIB), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/utility
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
+endif
+ifeq ($(TMC), 1)
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src/source
 endif
 
 ifeq ($(HARDWARE_VARIANT), arduino)
-HARDWARE_SUB_VARIANT ?= mega
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+  HARDWARE_SUB_VARIANT ?= mega
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+else ifeq ($(HARDWARE_VARIANT), Sanguino)
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
+else ifeq ($(HARDWARE_VARIANT), archim)
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/Device/ATMEL/
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/avr
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/USB
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/Wire/src
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/SPI/src
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/U8glib/src/clib
+  VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim
+  LDSCRIPT = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/linker_scripts/gcc/flash.ld
+  LDLIBS   = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
 else
-ifeq ($(HARDWARE_VARIANT), Sanguino)
-VPATH += $(HARDWARE_DIR)/marlin/avr/variants/sanguino
+  HARDWARE_SUB_VARIANT ?= standard
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
+endif
+
+LIB_SRC = wiring.c \
+  wiring_analog.c wiring_digital.c \
+  wiring_shift.c WInterrupts.c hooks.c
+
+ifeq ($(HARDWARE_VARIANT), archim)
+  LIB_ASRC += wiring_pulse_asm.S
 else
-HARDWARE_SUB_VARIANT ?= standard
-VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
+  LIB_SRC += wiring_pulse.c
 endif
-endif
-SRC = wiring.c \
-	wiring_analog.c wiring_digital.c \
-	wiring_pulse.c \
-	wiring_shift.c WInterrupts.c hooks.c
+
 ifeq ($(HARDWARE_VARIANT), Teensy)
-SRC = wiring.c
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
+  LIB_SRC = wiring.c
+  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
 endif
-CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
-	MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
-	SdFile.cpp SdVolume.cpp planner.cpp stepper.cpp \
-	temperature.cpp cardreader.cpp configuration_store.cpp \
-	watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
-	dac_mcp4728.cpp vector_3.cpp least_squares_fit.cpp endstops.cpp stopwatch.cpp utility.cpp \
-	printcounter.cpp nozzle.cpp serial.cpp gcode.cpp Max7219_Debug_LEDs.cpp
+
+LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
+
 ifeq ($(NEOPIXEL), 1)
-CXXSRC += Adafruit_NeoPixel.cpp
+  LIB_CXXSRC += Adafruit_NeoPixel.cpp
 endif
+
 ifeq ($(LIQUID_TWI2), 0)
-CXXSRC += LiquidCrystal.cpp
+  LIB_CXXSRC += LiquidCrystal.cpp
 else
-SRC += twi.c
-CXXSRC += Wire.cpp LiquidTWI2.cpp
+  LIB_SRC += twi.c
+  LIB_CXXSRC += Wire.cpp LiquidTWI2.cpp
 endif
 
 ifeq ($(WIRE), 1)
-SRC += twi.c
-CXXSRC += Wire.cpp
+  LIB_SRC += twi.c
+  LIB_CXXSRC += Wire.cpp
 endif
 
 ifeq ($(U8GLIB), 1)
-SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
+  LIB_CXXSRC += U8glib.cpp
+  LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
+endif
+
+ifeq ($(TMC), 1)
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
-LD_PREFIX=-nodefaultlibs
-LD_SUFFIX=-lm -lgcc -lc -lgcc
+  LD_PREFIX=-nodefaultlibs
+  LD_SUFFIX=-lm -lgcc -lc -lgcc
 endif
 
 #Check for Arduino 1.0.0 or higher and use the correct source files for that version
 ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
-CXXSRC += main.cpp
+  LIB_CXXSRC += main.cpp
 else
-SRC += pins_arduino.c main.c
+  LIB_SRC += pins_arduino.c main.c
 endif
 
 FORMAT = ihex
@@ -357,97 +631,124 @@ OPT = s
 DEFINES ?=
 
 # Program settings
-CC = $(AVR_TOOLS_PATH)avr-gcc
-CXX = $(AVR_TOOLS_PATH)avr-g++
-OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
-OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
-AR  = $(AVR_TOOLS_PATH)avr-ar
-SIZE = $(AVR_TOOLS_PATH)avr-size
-NM = $(AVR_TOOLS_PATH)avr-nm
+CC = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-gcc
+CXX = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-g++
+OBJCOPY = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objcopy
+OBJDUMP = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objdump
+AR  = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-ar
+SIZE = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-size
+NM = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-nm
 AVRDUDE = avrdude
 REMOVE = rm -f
 MV = mv -f
 
 # Place -D or -U options here
-CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)}
+CDEFS    = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
 CXXDEFS  = $(CDEFS)
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
-CDEFS  += -DUSB_SERIAL
-SRC    += usb.c pins_teensy.c
-CXXSRC += usb_api.cpp
+  CDEFS  += -DUSB_SERIAL
+  LIB_SRC    += usb.c pins_teensy.c
+  LIB_CXXSRC += usb_api.cpp
+
+else ifeq ($(HARDWARE_VARIANT), archim)
+  CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
+  LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
+
+  ifeq ($(U8GLIB), 1)
+    LIB_SRC += u8g_com_api.c u8g_pb32h1.c
+  endif
 endif
 
 # Add all the source directories as include directories too
 CINCS = ${addprefix -I ,${VPATH}}
 CXXINCS = ${addprefix -I ,${VPATH}}
 
+# Silence warnings for library code (won't work for .h files, unfortunately)
+LIBWARN = -w -Wno-packed-bitfield-compat
+
 # Compiler flag to set the C/CPP Standard level.
 CSTANDARD = -std=gnu99
 CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
-CWARN = -Wall -Wstrict-prototypes
-CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
-	-fshort-enums -w -ffunction-sections -fdata-sections \
-	-flto \
-	-DARDUINO=$(ARDUINO_VERSION)
+CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
+CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
+CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
+          -fshort-enums -ffunction-sections -fdata-sections
 ifneq ($(HARDWARE_MOTHERBOARD),)
-CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
+  CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-CEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics
-
-CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) $(CSTANDARD)
-CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) -Wall    $(CEXTRA) $(CTUNING) $(CXXSTANDARD)
+CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
+CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA)   $(CTUNING) $(CSTANDARD)
+CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
+ASFLAGS :=          $(CDEFS)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
-LDFLAGS = -lm
-
+ifeq ($(HARDWARE_VARIANT), archim)
+  LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
+  LD_SUFFIX = $(LDLIBS)
+  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+else
+  LD_PREFIX = -Wl,--gc-sections,--relax
+  LDFLAGS   = -lm
+  CTUNING   += -flto
+endif
 
 # Programming support using avrdude. Settings and variables.
 AVRDUDE_PORT = $(UPLOAD_PORT)
 AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
 ifeq ($(shell uname -s), Linux)
-AVRDUDE_CONF = /etc/avrdude/avrdude.conf
+  AVRDUDE_CONF = /etc/avrdude/avrdude.conf
 else
-AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
+  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
-	-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
-	-b$(UPLOAD_RATE)
+  -p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+  -b$(UPLOAD_RATE)
+
+# Since Marlin 2.0, the source files may be distributed into several
+# different directories, so it is necessary to find them recursively
+
+SRC    = $(shell find src -name '*.c'   -type f)
+CXXSRC = $(shell find src -name '*.cpp' -type f)
 
 # Define all object files.
-OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
+OBJ  = ${patsubst %.c,   $(BUILD_DIR)/arduino/%.o, ${LIB_SRC}}
+OBJ += ${patsubst %.cpp, $(BUILD_DIR)/arduino/%.o, ${LIB_CXXSRC}}
+OBJ += ${patsubst %.S,   $(BUILD_DIR)/arduino/%.o, ${LIB_ASRC}}
+OBJ += ${patsubst %.c,   $(BUILD_DIR)/%.o, ${SRC}}
 OBJ += ${patsubst %.cpp, $(BUILD_DIR)/%.o, ${CXXSRC}}
-OBJ += ${patsubst %.S, $(BUILD_DIR)/%.o, ${ASRC}}
 
 # Define all listing files.
-LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
+LST = $(LIB_ASRC:.S=.lst) $(LIB_CXXSRC:.cpp=.lst) $(LIB_SRC:.c=.lst)
 
 # Combine all necessary flags and optional flags.
 # Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
-ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS)
+ALL_CFLAGS   = $(MCU_FLAGS) $(CPU_FLAGS) $(CFLAGS) -I.
+ALL_CXXFLAGS = $(MCU_FLAGS) $(CPU_FLAGS) $(CXXFLAGS)
+ALL_ASFLAGS  = $(MCU_FLAGS) $(CPU_FLAGS) $(ASFLAGS) -x assembler-with-cpp
 
 # set V=1 (eg, "make V=1") to print the full commands etc.
 ifneq ($V,1)
- Pecho=@echo
- P=@
+  Pecho=@echo
+  P=@
 else
- Pecho=@:
- P=
+  Pecho=@:
+  P=
 endif
 
+# Create required build hierarchy if it does not exist
+
+$(shell mkdir -p $(dir $(OBJ)))
+
 # Default target.
 all: sizeafter
 
-build: $(BUILD_DIR) elf hex
-
-# Creates the object directory
-$(BUILD_DIR):
-	$P mkdir -p $(BUILD_DIR)
+build: elf hex bin
 
 elf: $(BUILD_DIR)/$(TARGET).elf
+bin: $(BUILD_DIR)/$(TARGET).bin
 hex: $(BUILD_DIR)/$(TARGET).hex
 eep: $(BUILD_DIR)/$(TARGET).eep
 lss: $(BUILD_DIR)/$(TARGET).lss
@@ -464,9 +765,9 @@ ifeq (${AVRDUDE_PROGRAMMER}, arduino)
 	stty -hup < $(UPLOAD_PORT); true
 endif
 
-	# Display size of file.
+# Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
-ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
+ELFSIZE = $(SIZE)  $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
           $(SIZE)  $(BUILD_DIR)/$(TARGET).elf
 sizebefore:
 	$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
@@ -477,10 +778,10 @@ sizeafter: build
 
 # Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
 COFFCONVERT=$(OBJCOPY) --debugging \
-	--change-section-address .data-0x800000 \
-	--change-section-address .bss-0x800000 \
-	--change-section-address .noinit-0x800000 \
-	--change-section-address .eeprom-0x810000
+  --change-section-address .data-0x800000 \
+  --change-section-address .bss-0x800000 \
+  --change-section-address .noinit-0x800000 \
+  --change-section-address .eeprom-0x810000
 
 
 coff: $(BUILD_DIR)/$(TARGET).elf
@@ -491,16 +792,20 @@ extcoff: $(TARGET).elf
 	$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
 
 
-.SUFFIXES: .elf .hex .eep .lss .sym
+.SUFFIXES: .elf .hex .eep .lss .sym .bin
 .PRECIOUS: .o
 
 .elf.hex:
 	$(Pecho) "  COPY  $@"
 	$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
 
+.elf.bin:
+	$(Pecho) "  COPY  $@"
+	$P $(OBJCOPY) -O binary -R .eeprom $< $@
+
 .elf.eep:
 	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
-		--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
+    --change-section-lma .eeprom=0 -O $(FORMAT) $< $@
 
 # Create extended listing file from ELF output file.
 .elf.lss:
@@ -510,35 +815,44 @@ extcoff: $(TARGET).elf
 .elf.sym:
 	$(NM) -n $< > $@
 
-	# Link: create ELF output file from library.
+# Link: create ELF output file from library.
+
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
+
+# Object files that were found in "src" will be stored in $(BUILD_DIR)
+# in directories that mirror the structure of "src"
 
 $(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
 	$(Pecho) "  CC    $<"
-	$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
-
-$(BUILD_DIR)/%.o: $(BUILD_DIR)/%.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
-	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
+	$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
 
 $(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
 	$(Pecho) "  CXX   $<"
-	$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
+	$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
 
+# Object files for Arduino libs will be created in $(BUILD_DIR)/arduino
+
+$(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
+	$(Pecho) "  CC    $<"
+	$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
+
+$(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
+	$(Pecho) "  CXX   $<"
+	$P $(CXX) -MMD -c $(ALL_CXXFLAGS)  $(LIBWARN) $< -o $@
+
+$(BUILD_DIR)/arduino/%.o: %.S $(MAKEFILE)
+	$(Pecho) "  CXX   $<"
+	$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
 
 # Target: clean project.
 clean:
-	$(Pecho) "  RM    $(BUILD_DIR)/*"
-	$P $(REMOVE) $(BUILD_DIR)/$(TARGET).hex $(BUILD_DIR)/$(TARGET).eep $(BUILD_DIR)/$(TARGET).cof $(BUILD_DIR)/$(TARGET).elf \
-		$(BUILD_DIR)/$(TARGET).map $(BUILD_DIR)/$(TARGET).sym $(BUILD_DIR)/$(TARGET).lss $(BUILD_DIR)/$(TARGET).cpp \
-		$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
 	$(Pecho) "  RMDIR $(BUILD_DIR)/"
 	$P rm -rf $(BUILD_DIR)
 
 
-.PHONY:	all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
+.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
 
 # Automaticaly include the dependency files created by gcc
--include ${wildcard $(BUILD_DIR)/*.d}
+-include ${patsubst %.o, %.d, ${OBJ}}

Marlin/Marlin.h

@@ -1,487 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifndef MARLIN_H
-#define MARLIN_H
-
-#include <math.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <inttypes.h>
-
-#include <util/delay.h>
-#include <avr/pgmspace.h>
-#include <avr/eeprom.h>
-#include <avr/interrupt.h>
-
-#include "MarlinConfig.h"
-
-#ifdef DEBUG_GCODE_PARSER
-  #include "gcode.h"
-#endif
-
-#include "enum.h"
-#include "types.h"
-#include "fastio.h"
-#include "utility.h"
-#include "serial.h"
-
-#if ENABLED(PRINTCOUNTER)
-  #include "printcounter.h"
-#else
-  #include "stopwatch.h"
-#endif
-
-void idle(
-  #if ENABLED(ADVANCED_PAUSE_FEATURE)
-    bool no_stepper_sleep = false  // pass true to keep steppers from disabling on timeout
-  #endif
-);
-
-void manage_inactivity(bool ignore_stepper_queue = false);
-
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  extern bool extruder_duplication_enabled;
-#endif
-
-#if HAS_X2_ENABLE
-  #define  enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
-  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
-#elif HAS_X_ENABLE
-  #define  enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
-  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
-#else
-  #define  enable_X() NOOP
-  #define disable_X() NOOP
-#endif
-
-#if HAS_Y2_ENABLE
-  #define  enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
-  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
-#elif HAS_Y_ENABLE
-  #define  enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
-  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
-#else
-  #define  enable_Y() NOOP
-  #define disable_Y() NOOP
-#endif
-
-#if HAS_Z2_ENABLE
-  #define  enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
-  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
-#elif HAS_Z_ENABLE
-  #define  enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
-  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
-#else
-  #define  enable_Z() NOOP
-  #define disable_Z() NOOP
-#endif
-
-#if ENABLED(MIXING_EXTRUDER)
-
-  /**
-   * Mixing steppers synchronize their enable (and direction) together
-   */
-  #if MIXING_STEPPERS > 3
-    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
-    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
-  #elif MIXING_STEPPERS > 2
-    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); }
-    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); }
-  #else
-    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); }
-    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); }
-  #endif
-  #define  enable_E1() NOOP
-  #define disable_E1() NOOP
-  #define  enable_E2() NOOP
-  #define disable_E2() NOOP
-  #define  enable_E3() NOOP
-  #define disable_E3() NOOP
-  #define  enable_E4() NOOP
-  #define disable_E4() NOOP
-
-#else // !MIXING_EXTRUDER
-
-  #if HAS_E0_ENABLE
-    #define  enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
-    #define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
-  #else
-    #define  enable_E0() NOOP
-    #define disable_E0() NOOP
-  #endif
-
-  #if E_STEPPERS > 1 && HAS_E1_ENABLE
-    #define  enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
-    #define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
-  #else
-    #define  enable_E1() NOOP
-    #define disable_E1() NOOP
-  #endif
-
-  #if E_STEPPERS > 2 && HAS_E2_ENABLE
-    #define  enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
-    #define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
-  #else
-    #define  enable_E2() NOOP
-    #define disable_E2() NOOP
-  #endif
-
-  #if E_STEPPERS > 3 && HAS_E3_ENABLE
-    #define  enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
-    #define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
-  #else
-    #define  enable_E3() NOOP
-    #define disable_E3() NOOP
-  #endif
-
-  #if E_STEPPERS > 4 && HAS_E4_ENABLE
-    #define  enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
-    #define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
-  #else
-    #define  enable_E4() NOOP
-    #define disable_E4() NOOP
-  #endif
-
-#endif // !MIXING_EXTRUDER
-
-#if ENABLED(G38_PROBE_TARGET)
-  extern bool G38_move,        // flag to tell the interrupt handler that a G38 command is being run
-              G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
-#endif
-
-/**
- * The axis order in all axis related arrays is X, Y, Z, E
- */
-#define _AXIS(AXIS) AXIS ##_AXIS
-
-void enable_all_steppers();
-void disable_e_steppers();
-void disable_all_steppers();
-
-void FlushSerialRequestResend();
-void ok_to_send();
-
-void kill(const char*);
-
-void quickstop_stepper();
-
-#if ENABLED(FILAMENT_RUNOUT_SENSOR)
-  void handle_filament_runout();
-#endif
-
-extern uint8_t marlin_debug_flags;
-#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
-
-extern bool Running;
-inline bool IsRunning() { return  Running; }
-inline bool IsStopped() { return !Running; }
-
-bool enqueue_and_echo_command(const char* cmd, bool say_ok=false); // Add a single command to the end of the buffer. Return false on failure.
-void enqueue_and_echo_commands_P(const char * const cmd);          // Set one or more commands to be prioritized over the next Serial/SD command.
-void clear_command_queue();
-
-extern millis_t previous_cmd_ms;
-inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
-
-#if ENABLED(FAST_PWM_FAN)
-  void setPwmFrequency(uint8_t pin, int val);
-#endif
-
-/**
- * Feedrate scaling and conversion
- */
-extern int16_t feedrate_percentage;
-
-#define MMM_TO_MMS(MM_M) ((MM_M)/60.0)
-#define MMS_TO_MMM(MM_S) ((MM_S)*60.0)
-#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01)
-
-extern bool axis_relative_modes[];
-extern bool volumetric_enabled;
-extern int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder
-extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
-extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
-extern bool axis_known_position[XYZ];
-extern bool axis_homed[XYZ];
-extern volatile bool wait_for_heatup;
-
-#if HAS_RESUME_CONTINUE
-  extern volatile bool wait_for_user;
-#endif
-
-extern float current_position[NUM_AXIS];
-
-// Workspace offsets
-#if HAS_WORKSPACE_OFFSET
-  #if HAS_HOME_OFFSET
-    extern float home_offset[XYZ];
-  #endif
-  #if HAS_POSITION_SHIFT
-    extern float position_shift[XYZ];
-  #endif
-#endif
-
-#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
-  extern float workspace_offset[XYZ];
-  #define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
-#elif HAS_HOME_OFFSET
-  #define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
-#elif HAS_POSITION_SHIFT
-  #define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
-#else
-  #define WORKSPACE_OFFSET(AXIS) 0
-#endif
-
-#define LOGICAL_POSITION(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
-#define RAW_POSITION(POS, AXIS)     ((POS) - WORKSPACE_OFFSET(AXIS))
-
-#if HAS_POSITION_SHIFT || DISABLED(DELTA)
-  #define LOGICAL_X_POSITION(POS)   LOGICAL_POSITION(POS, X_AXIS)
-  #define LOGICAL_Y_POSITION(POS)   LOGICAL_POSITION(POS, Y_AXIS)
-  #define RAW_X_POSITION(POS)       RAW_POSITION(POS, X_AXIS)
-  #define RAW_Y_POSITION(POS)       RAW_POSITION(POS, Y_AXIS)
-#else
-  #define LOGICAL_X_POSITION(POS)   (POS)
-  #define LOGICAL_Y_POSITION(POS)   (POS)
-  #define RAW_X_POSITION(POS)       (POS)
-  #define RAW_Y_POSITION(POS)       (POS)
-#endif
-
-#define LOGICAL_Z_POSITION(POS)     LOGICAL_POSITION(POS, Z_AXIS)
-#define RAW_Z_POSITION(POS)         RAW_POSITION(POS, Z_AXIS)
-#define RAW_CURRENT_POSITION(A)     RAW_##A##_POSITION(current_position[A##_AXIS])
-
-// Hotend Offsets
-#if HOTENDS > 1
-  extern float hotend_offset[XYZ][HOTENDS];
-#endif
-
-// Software Endstops
-extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
-
-#if HAS_SOFTWARE_ENDSTOPS
-  extern bool soft_endstops_enabled;
-  void clamp_to_software_endstops(float target[XYZ]);
-#else
-  #define soft_endstops_enabled false
-  #define clamp_to_software_endstops(x) NOOP
-#endif
-
-#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
-  void update_software_endstops(const AxisEnum axis);
-#endif
-
-#if IS_KINEMATIC
-  extern float delta[ABC];
-  void inverse_kinematics(const float logical[XYZ]);
-#endif
-
-#if ENABLED(DELTA)
-  extern float endstop_adj[ABC],
-               delta_radius,
-               delta_diagonal_rod,
-               delta_calibration_radius,
-               delta_segments_per_second,
-               delta_tower_angle_trim[2],
-               delta_clip_start_height;
-  void recalc_delta_settings(float radius, float diagonal_rod);
-#elif IS_SCARA
-  void forward_kinematics_SCARA(const float &a, const float &b);
-#endif
-
-#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
-  extern int bilinear_grid_spacing[2], bilinear_start[2];
-  extern float bilinear_grid_factor[2],
-               z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
-  float bilinear_z_offset(const float logical[XYZ]);
-#endif
-
-#if ENABLED(AUTO_BED_LEVELING_UBL)
-  typedef struct { double A, B, D; } linear_fit;
-  linear_fit* lsf_linear_fit(double x[], double y[], double z[], const int);
-#endif
-
-#if HAS_LEVELING
-  bool leveling_is_valid();
-  bool leveling_is_active();
-  void set_bed_leveling_enabled(const bool enable=true);
-  void reset_bed_level();
-#endif
-
-#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-  void set_z_fade_height(const float zfh);
-#endif
-
-#if ENABLED(Z_DUAL_ENDSTOPS)
-  extern float z_endstop_adj;
-#endif
-
-#if HAS_BED_PROBE
-  extern float zprobe_zoffset;
-  void refresh_zprobe_zoffset(const bool no_babystep=false);
-  #define DEPLOY_PROBE() set_probe_deployed(true)
-  #define STOW_PROBE() set_probe_deployed(false)
-#else
-  #define DEPLOY_PROBE()
-  #define STOW_PROBE()
-#endif
-
-#if ENABLED(HOST_KEEPALIVE_FEATURE)
-  extern MarlinBusyState busy_state;
-  #define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
-#else
-  #define KEEPALIVE_STATE(n) NOOP
-#endif
-
-#if FAN_COUNT > 0
-  extern int16_t fanSpeeds[FAN_COUNT];
-  #if ENABLED(PROBING_FANS_OFF)
-    extern bool fans_paused;
-    extern int16_t paused_fanSpeeds[FAN_COUNT];
-  #endif
-#endif
-
-#if ENABLED(BARICUDA)
-  extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure;
-#endif
-
-#if ENABLED(FILAMENT_WIDTH_SENSOR)
-  extern bool filament_sensor;         // Flag that filament sensor readings should control extrusion
-  extern float filament_width_nominal, // Theoretical filament diameter i.e., 3.00 or 1.75
-               filament_width_meas;    // Measured filament diameter
-  extern uint8_t meas_delay_cm,        // Delay distance
-                 measurement_delay[];  // Ring buffer to delay measurement
-  extern int8_t filwidth_delay_index[2]; // Ring buffer indexes. Used by planner, temperature, and main code
-#endif
-
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
-  extern AdvancedPauseMenuResponse advanced_pause_menu_response;
-#endif
-
-#if ENABLED(PID_EXTRUSION_SCALING)
-  extern int lpq_len;
-#endif
-
-#if ENABLED(FWRETRACT)
-  extern bool autoretract_enabled;                 // M209 S - Autoretract switch
-  extern float retract_length,                     // M207 S - G10 Retract length
-               retract_feedrate_mm_s,              // M207 F - G10 Retract feedrate
-               retract_zlift,                      // M207 Z - G10 Retract hop size
-               retract_recover_length,             // M208 S - G11 Recover length
-               retract_recover_feedrate_mm_s,      // M208 F - G11 Recover feedrate
-               swap_retract_length,                // M207 W - G10 Swap Retract length
-               swap_retract_recover_length,        // M208 W - G11 Swap Recover length
-               swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate
-#endif
-
-// Print job timer
-#if ENABLED(PRINTCOUNTER)
-  extern PrintCounter print_job_timer;
-#else
-  extern Stopwatch print_job_timer;
-#endif
-
-// Handling multiple extruders pins
-extern uint8_t active_extruder;
-
-#if HAS_TEMP_HOTEND || HAS_TEMP_BED
-  void print_heaterstates();
-#endif
-
-#if ENABLED(MIXING_EXTRUDER)
-  extern float mixing_factor[MIXING_STEPPERS];
-#endif
-
-void calculate_volumetric_multipliers();
-
-/**
- * Blocking movement and shorthand functions
- */
-void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s=0.0);
-void do_blocking_move_to_x(const float &x, const float &fr_mm_s=0.0);
-void do_blocking_move_to_z(const float &z, const float &fr_mm_s=0.0);
-void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s=0.0);
-
-#if ENABLED(Z_PROBE_ALLEN_KEY) || ENABLED(Z_PROBE_SLED) || HAS_PROBING_PROCEDURE || HOTENDS > 1 || ENABLED(NOZZLE_CLEAN_FEATURE) || ENABLED(NOZZLE_PARK_FEATURE)
-  bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);
-#endif
-
-/**
- * position_is_reachable family of functions
- */
-
-#if IS_KINEMATIC // (DELTA or SCARA)
-
-  #if IS_SCARA
-    extern const float L1, L2;
-  #endif
-
-  inline bool position_is_reachable_raw_xy(const float &rx, const float &ry) {
-    #if ENABLED(DELTA)
-      return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS);
-    #elif IS_SCARA
-      #if MIDDLE_DEAD_ZONE_R > 0
-        const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
-        return R2 >= sq(float(MIDDLE_DEAD_ZONE_R)) && R2 <= sq(L1 + L2);
-      #else
-        return HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y) <= sq(L1 + L2);
-      #endif
-    #else // CARTESIAN
-      // To be migrated from MakerArm branch in future
-    #endif
-  }
-
-  inline bool position_is_reachable_by_probe_raw_xy(const float &rx, const float &ry) {
-
-    // Both the nozzle and the probe must be able to reach the point.
-    // This won't work on SCARA since the probe offset rotates with the arm.
-
-    return position_is_reachable_raw_xy(rx, ry)
-        && position_is_reachable_raw_xy(rx - X_PROBE_OFFSET_FROM_EXTRUDER, ry - Y_PROBE_OFFSET_FROM_EXTRUDER);
-  }
-
-#else // CARTESIAN
-
-  inline bool position_is_reachable_raw_xy(const float &rx, const float &ry) {
-      // Add 0.001 margin to deal with float imprecision
-      return WITHIN(rx, X_MIN_POS - 0.001, X_MAX_POS + 0.001)
-          && WITHIN(ry, Y_MIN_POS - 0.001, Y_MAX_POS + 0.001);
-  }
-
-  inline bool position_is_reachable_by_probe_raw_xy(const float &rx, const float &ry) {
-      // Add 0.001 margin to deal with float imprecision
-      return WITHIN(rx, MIN_PROBE_X - 0.001, MAX_PROBE_X + 0.001)
-          && WITHIN(ry, MIN_PROBE_Y - 0.001, MAX_PROBE_Y + 0.001);
-  }
-
-#endif // CARTESIAN
-
-FORCE_INLINE bool position_is_reachable_by_probe_xy(const float &lx, const float &ly) {
-  return position_is_reachable_by_probe_raw_xy(RAW_X_POSITION(lx), RAW_Y_POSITION(ly));
-}
-
-FORCE_INLINE bool position_is_reachable_xy(const float &lx, const float &ly) {
-  return position_is_reachable_raw_xy(RAW_X_POSITION(lx), RAW_Y_POSITION(ly));
-}
-
-#endif // MARLIN_H

Marlin/Marlin.ino

@@ -1,72 +1,53 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
+/*
+================================================================================
 
-/**
- * About Marlin
- *
- * This firmware is a mashup between Sprinter and grbl.
- *  - https://github.com/kliment/Sprinter
- *  - https://github.com/simen/grbl/tree
- */
+  Marlin Firmware
 
-#include "MarlinConfig.h"
+  (c) 2011-2018 MarlinFirmware
+  Portions of Marlin are (c) by their respective authors.
+  All code complies with GPLv2 and/or GPLv3
 
-#if ENABLED(ULTRA_LCD)
-  #if ENABLED(LCD_I2C_TYPE_PCF8575)
-    #include <Wire.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
-    #include <Wire.h>
-    #include <LiquidTWI2.h>
-  #elif ENABLED(LCM1602)
-    #include <Wire.h>
-    #include <LCD.h>
-    #include <LiquidCrystal_I2C.h>
-  #elif ENABLED(DOGLCD)
-    #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://github.com/olikraus/U8glib_Arduino)
-  #else
-    #include <LiquidCrystal.h> // library for character LCD
-  #endif
-#endif
+================================================================================
 
-#if HAS_DIGIPOTSS
-  #include <SPI.h>
-#endif
+Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
-#if ENABLED(DIGIPOT_I2C)
-  #include <Wire.h>
-#endif
+To configure Marlin you must edit Configuration.h and Configuration_adv.h
+located in the root 'Marlin' folder. Check the config/examples folder to see if
+there's a more suitable starting-point for your specific hardware.
 
-#if ENABLED(HAVE_TMCDRIVER)
-  #include <SPI.h>
-  #include <TMC26XStepper.h>
-#endif
+Before diving in, we recommend the following essential links:
 
-#if ENABLED(HAVE_TMC2130)
-  #include <SPI.h>
-  #include <TMC2130Stepper.h>
-#endif
+Marlin Firmware Official Website
 
-#if ENABLED(HAVE_L6470DRIVER)
-  #include <SPI.h>
-  #include <L6470.h>
-#endif
+  - http://marlinfw.org/
+    The official Marlin Firmware website contains the most up-to-date
+    documentation. Contributions are always welcome!
+
+Configuration
+
+  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+    A good 20-minute overview of Marlin configuration by Tom Sanladerer.
+    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
+    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
+
+  - http://marlinfw.org/docs/configuration/configuration.html
+    Marlin's configuration options are explained in more detail here.
+
+Getting Help
+
+  - http://forums.reprap.org/list.php?415
+    The Marlin Discussion Forum is a great place to get help from other Marlin
+    users who may have experienced similar issues to your own.
+
+  - https://github.com/MarlinFirmware/Marlin/issues
+    With a free GitHub account you can provide us with feedback, bug reports,
+    and feature requests via the Marlin Issue Queue.
+
+Contributing
+
+  - http://marlinfw.org/docs/development/contributing.html
+    If you'd like to contribute to Marlin, read this first!
+
+  - http://marlinfw.org/docs/development/coding_standards.html
+    Before submitting code get to know the Coding Standards.
+*/

Marlin/MarlinSerial.cpp

@@ -1,517 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * MarlinSerial.cpp - Hardware serial library for Wiring
- * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
- *
- * Modified 23 November 2006 by David A. Mellis
- * Modified 28 September 2010 by Mark Sproul
- * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
- */
-
-#include "MarlinSerial.h"
-#include "Marlin.h"
-
-// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
-
-#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
-
-  #if UART_PRESENT(SERIAL_PORT)
-    ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
-    #if TX_BUFFER_SIZE > 0
-      ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
-      static bool _written;
-    #endif
-  #endif
-
-  #if ENABLED(EMERGENCY_PARSER)
-
-    #include "stepper.h"
-    #include "language.h"
-
-    // Currently looking for: M108, M112, M410
-    // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h
-
-    FORCE_INLINE void emergency_parser(const unsigned char c) {
-
-      static e_parser_state state = state_RESET;
-
-      switch (state) {
-        case state_RESET:
-          switch (c) {
-            case ' ': break;
-            case 'N': state = state_N;      break;
-            case 'M': state = state_M;      break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_N:
-          switch (c) {
-            case '0': case '1': case '2':
-            case '3': case '4': case '5':
-            case '6': case '7': case '8':
-            case '9': case '-': case ' ':   break;
-            case 'M': state = state_M;      break;
-            default:  state = state_IGNORE;
-          }
-          break;
-
-        case state_M:
-          switch (c) {
-            case ' ': break;
-            case '1': state = state_M1;     break;
-            case '4': state = state_M4;     break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_M1:
-          switch (c) {
-            case '0': state = state_M10;    break;
-            case '1': state = state_M11;    break;
-            default: state = state_IGNORE;
-          }
-          break;
-
-        case state_M10:
-          state = (c == '8') ? state_M108 : state_IGNORE;
-          break;
-
-        case state_M11:
-          state = (c == '2') ? state_M112 : state_IGNORE;
-          break;
-
-        case state_M4:
-          state = (c == '1') ? state_M41 : state_IGNORE;
-          break;
-
-        case state_M41:
-          state = (c == '0') ? state_M410 : state_IGNORE;
-          break;
-
-        case state_IGNORE:
-          if (c == '\n') state = state_RESET;
-          break;
-
-        default:
-          if (c == '\n') {
-            switch (state) {
-              case state_M108:
-                wait_for_user = wait_for_heatup = false;
-                break;
-              case state_M112:
-                kill(PSTR(MSG_KILLED));
-                break;
-              case state_M410:
-                quickstop_stepper();
-                break;
-              default:
-                break;
-            }
-            state = state_RESET;
-          }
-      }
-    }
-
-  #endif // EMERGENCY_PARSER
-
-  FORCE_INLINE void store_char(unsigned char c) {
-    CRITICAL_SECTION_START;
-      const uint8_t h = rx_buffer.head,
-                    i = (uint8_t)(h + 1) & (RX_BUFFER_SIZE - 1);
-
-      // if we should be storing the received character into the location
-      // just before the tail (meaning that the head would advance to the
-      // current location of the tail), we're about to overflow the buffer
-      // and so we don't write the character or advance the head.
-      if (i != rx_buffer.tail) {
-        rx_buffer.buffer[h] = c;
-        rx_buffer.head = i;
-      }
-    CRITICAL_SECTION_END;
-
-    #if ENABLED(EMERGENCY_PARSER)
-      emergency_parser(c);
-    #endif
-  }
-
-  #if TX_BUFFER_SIZE > 0
-
-    FORCE_INLINE void _tx_udr_empty_irq(void) {
-      // If interrupts are enabled, there must be more data in the output
-      // buffer. Send the next byte
-      const uint8_t t = tx_buffer.tail,
-                    c = tx_buffer.buffer[t];
-      tx_buffer.tail = (t + 1) & (TX_BUFFER_SIZE - 1);
-
-      M_UDRx = c;
-
-      // clear the TXC bit -- "can be cleared by writing a one to its bit
-      // location". This makes sure flush() won't return until the bytes
-      // actually got written
-      SBI(M_UCSRxA, M_TXCx);
-
-      if (tx_buffer.head == tx_buffer.tail) {
-        // Buffer empty, so disable interrupts
-        CBI(M_UCSRxB, M_UDRIEx);
-      }
-    }
-
-    #ifdef M_USARTx_UDRE_vect
-      ISR(M_USARTx_UDRE_vect) {
-        _tx_udr_empty_irq();
-      }
-    #endif
-
-  #endif // TX_BUFFER_SIZE
-
-  #ifdef M_USARTx_RX_vect
-    ISR(M_USARTx_RX_vect) {
-      const unsigned char c = M_UDRx;
-      store_char(c);
-    }
-  #endif
-
-  // Public Methods
-
-  void MarlinSerial::begin(const long baud) {
-    uint16_t baud_setting;
-    bool useU2X = true;
-
-    #if F_CPU == 16000000UL && SERIAL_PORT == 0
-      // hard-coded exception for compatibility with the bootloader shipped
-      // with the Duemilanove and previous boards and the firmware on the 8U2
-      // on the Uno and Mega 2560.
-      if (baud == 57600) useU2X = false;
-    #endif
-
-    if (useU2X) {
-      M_UCSRxA = _BV(M_U2Xx);
-      baud_setting = (F_CPU / 4 / baud - 1) / 2;
-    }
-    else {
-      M_UCSRxA = 0;
-      baud_setting = (F_CPU / 8 / baud - 1) / 2;
-    }
-
-    // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
-    M_UBRRxH = baud_setting >> 8;
-    M_UBRRxL = baud_setting;
-
-    SBI(M_UCSRxB, M_RXENx);
-    SBI(M_UCSRxB, M_TXENx);
-    SBI(M_UCSRxB, M_RXCIEx);
-    #if TX_BUFFER_SIZE > 0
-      CBI(M_UCSRxB, M_UDRIEx);
-      _written = false;
-    #endif
-  }
-
-  void MarlinSerial::end() {
-    CBI(M_UCSRxB, M_RXENx);
-    CBI(M_UCSRxB, M_TXENx);
-    CBI(M_UCSRxB, M_RXCIEx);
-    CBI(M_UCSRxB, M_UDRIEx);
-  }
-
-  void MarlinSerial::checkRx(void) {
-    if (TEST(M_UCSRxA, M_RXCx)) {
-      const uint8_t c = M_UDRx;
-      store_char(c);
-    }
-  }
-
-  int MarlinSerial::peek(void) {
-    CRITICAL_SECTION_START;
-      const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
-    CRITICAL_SECTION_END;
-    return v;
-  }
-
-  int MarlinSerial::read(void) {
-    int v;
-    CRITICAL_SECTION_START;
-      const uint8_t t = rx_buffer.tail;
-      if (rx_buffer.head == t)
-        v = -1;
-      else {
-        v = rx_buffer.buffer[t];
-        rx_buffer.tail = (uint8_t)(t + 1) & (RX_BUFFER_SIZE - 1);
-      }
-    CRITICAL_SECTION_END;
-    return v;
-  }
-
-  uint8_t MarlinSerial::available(void) {
-    CRITICAL_SECTION_START;
-      const uint8_t h = rx_buffer.head,
-                    t = rx_buffer.tail;
-    CRITICAL_SECTION_END;
-    return (uint8_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
-  }
-
-  void MarlinSerial::flush(void) {
-    // RX
-    // don't reverse this or there may be problems if the RX interrupt
-    // occurs after reading the value of rx_buffer_head but before writing
-    // the value to rx_buffer_tail; the previous value of rx_buffer_head
-    // may be written to rx_buffer_tail, making it appear as if the buffer
-    // were full, not empty.
-    CRITICAL_SECTION_START;
-      rx_buffer.head = rx_buffer.tail;
-    CRITICAL_SECTION_END;
-  }
-
-  #if TX_BUFFER_SIZE > 0
-    uint8_t MarlinSerial::availableForWrite(void) {
-      CRITICAL_SECTION_START;
-        const uint8_t h = tx_buffer.head,
-                      t = tx_buffer.tail;
-      CRITICAL_SECTION_END;
-      return (uint8_t)(TX_BUFFER_SIZE + h - t) & (TX_BUFFER_SIZE - 1);
-    }
-
-    void MarlinSerial::write(const uint8_t c) {
-      _written = true;
-      CRITICAL_SECTION_START;
-        bool emty = (tx_buffer.head == tx_buffer.tail);
-      CRITICAL_SECTION_END;
-      // If the buffer and the data register is empty, just write the byte
-      // to the data register and be done. This shortcut helps
-      // significantly improve the effective datarate at high (>
-      // 500kbit/s) bitrates, where interrupt overhead becomes a slowdown.
-      if (emty && TEST(M_UCSRxA, M_UDREx)) {
-        CRITICAL_SECTION_START;
-          M_UDRx = c;
-          SBI(M_UCSRxA, M_TXCx);
-        CRITICAL_SECTION_END;
-        return;
-      }
-      const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
-
-      // If the output buffer is full, there's nothing for it other than to
-      // wait for the interrupt handler to empty it a bit
-      while (i == tx_buffer.tail) {
-        if (!TEST(SREG, SREG_I)) {
-          // Interrupts are disabled, so we'll have to poll the data
-          // register empty flag ourselves. If it is set, pretend an
-          // interrupt has happened and call the handler to free up
-          // space for us.
-          if (TEST(M_UCSRxA, M_UDREx))
-            _tx_udr_empty_irq();
-        }
-        else {
-          // nop, the interrupt handler will free up space for us
-        }
-      }
-
-      tx_buffer.buffer[tx_buffer.head] = c;
-      { CRITICAL_SECTION_START;
-          tx_buffer.head = i;
-          SBI(M_UCSRxB, M_UDRIEx);
-        CRITICAL_SECTION_END;
-      }
-      return;
-    }
-
-    void MarlinSerial::flushTX(void) {
-      // TX
-      // If we have never written a byte, no need to flush. This special
-      // case is needed since there is no way to force the TXC (transmit
-      // complete) bit to 1 during initialization
-      if (!_written)
-        return;
-
-      while (TEST(M_UCSRxB, M_UDRIEx) || !TEST(M_UCSRxA, M_TXCx)) {
-        if (!TEST(SREG, SREG_I) && TEST(M_UCSRxB, M_UDRIEx))
-          // Interrupts are globally disabled, but the DR empty
-          // interrupt should be enabled, so poll the DR empty flag to
-          // prevent deadlock
-          if (TEST(M_UCSRxA, M_UDREx))
-            _tx_udr_empty_irq();
-      }
-      // If we get here, nothing is queued anymore (DRIE is disabled) and
-      // the hardware finished tranmission (TXC is set).
-  }
-
-  #else
-    void MarlinSerial::write(uint8_t c) {
-      while (!TEST(M_UCSRxA, M_UDREx))
-        ;
-      M_UDRx = c;
-    }
-  #endif
-
-  // end NEW
-
-  /// imports from print.h
-
-
-  void MarlinSerial::print(char c, int base) {
-    print((long)c, base);
-  }
-
-  void MarlinSerial::print(unsigned char b, int base) {
-    print((unsigned long)b, base);
-  }
-
-  void MarlinSerial::print(int n, int base) {
-    print((long)n, base);
-  }
-
-  void MarlinSerial::print(unsigned int n, int base) {
-    print((unsigned long)n, base);
-  }
-
-  void MarlinSerial::print(long n, int base) {
-    if (base == 0)
-      write(n);
-    else if (base == 10) {
-      if (n < 0) {
-        print('-');
-        n = -n;
-      }
-      printNumber(n, 10);
-    }
-    else
-      printNumber(n, base);
-  }
-
-  void MarlinSerial::print(unsigned long n, int base) {
-    if (base == 0) write(n);
-    else printNumber(n, base);
-  }
-
-  void MarlinSerial::print(double n, int digits) {
-    printFloat(n, digits);
-  }
-
-  void MarlinSerial::println(void) {
-    print('\r');
-    print('\n');
-  }
-
-  void MarlinSerial::println(const String& s) {
-    print(s);
-    println();
-  }
-
-  void MarlinSerial::println(const char c[]) {
-    print(c);
-    println();
-  }
-
-  void MarlinSerial::println(char c, int base) {
-    print(c, base);
-    println();
-  }
-
-  void MarlinSerial::println(unsigned char b, int base) {
-    print(b, base);
-    println();
-  }
-
-  void MarlinSerial::println(int n, int base) {
-    print(n, base);
-    println();
-  }
-
-  void MarlinSerial::println(unsigned int n, int base) {
-    print(n, base);
-    println();
-  }
-
-  void MarlinSerial::println(long n, int base) {
-    print(n, base);
-    println();
-  }
-
-  void MarlinSerial::println(unsigned long n, int base) {
-    print(n, base);
-    println();
-  }
-
-  void MarlinSerial::println(double n, int digits) {
-    print(n, digits);
-    println();
-  }
-
-  // Private Methods
-
-  void MarlinSerial::printNumber(unsigned long n, uint8_t base) {
-    if (n) {
-      unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-      int8_t i = 0;
-      while (n) {
-        buf[i++] = n % base;
-        n /= base;
-      }
-      while (i--)
-        print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-    }
-    else
-      print('0');
-  }
-
-  void MarlinSerial::printFloat(double number, uint8_t digits) {
-    // Handle negative numbers
-    if (number < 0.0) {
-      print('-');
-      number = -number;
-    }
-
-    // Round correctly so that print(1.999, 2) prints as "2.00"
-    double rounding = 0.5;
-    for (uint8_t i = 0; i < digits; ++i)
-      rounding *= 0.1;
-
-    number += rounding;
-
-    // Extract the integer part of the number and print it
-    unsigned long int_part = (unsigned long)number;
-    double remainder = number - (double)int_part;
-    print(int_part);
-
-    // Print the decimal point, but only if there are digits beyond
-    if (digits) {
-      print('.');
-      // Extract digits from the remainder one at a time
-      while (digits--) {
-        remainder *= 10.0;
-        int toPrint = int(remainder);
-        print(toPrint);
-        remainder -= toPrint;
-      }
-    }
-  }
-
-  // Preinstantiate
-  MarlinSerial customizedSerial;
-
-#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
-
-// For AT90USB targets use the UART for BT interfacing
-#if defined(USBCON) && ENABLED(BLUETOOTH)
-  HardwareSerial bluetoothSerial;
-#endif

Marlin/MarlinSerial.h

@@ -1,174 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  MarlinSerial.h - Hardware serial library for Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  Modified 28 September 2010 by Mark Sproul
-  Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
-
-*/
-
-#ifndef MARLINSERIAL_H
-#define MARLINSERIAL_H
-
-#include "MarlinConfig.h"
-
-#ifndef SERIAL_PORT
-  #define SERIAL_PORT 0
-#endif
-
-// The presence of the UBRRH register is used to detect a UART.
-#define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
-                            (port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
-                            (port == 3 && defined(UBRR3H)))
-
-// These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
-// requires two levels of indirection to expand macro values properly)
-#define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
-#if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-  #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
-#else
-  #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
-#endif
-
-// Registers used by MarlinSerial class (expanded depending on selected serial port)
-#define M_UCSRxA           SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
-#define M_UCSRxB           SERIAL_REGNAME(UCSR,SERIAL_PORT,B)
-#define M_RXENx            SERIAL_REGNAME(RXEN,SERIAL_PORT,)
-#define M_TXENx            SERIAL_REGNAME(TXEN,SERIAL_PORT,)
-#define M_TXCx             SERIAL_REGNAME(TXC,SERIAL_PORT,)
-#define M_RXCIEx           SERIAL_REGNAME(RXCIE,SERIAL_PORT,)
-#define M_UDREx            SERIAL_REGNAME(UDRE,SERIAL_PORT,)
-#define M_UDRIEx           SERIAL_REGNAME(UDRIE,SERIAL_PORT,)
-#define M_UDRx             SERIAL_REGNAME(UDR,SERIAL_PORT,)
-#define M_UBRRxH           SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
-#define M_UBRRxL           SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
-#define M_RXCx             SERIAL_REGNAME(RXC,SERIAL_PORT,)
-#define M_USARTx_RX_vect   SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)
-#define M_U2Xx             SERIAL_REGNAME(U2X,SERIAL_PORT,)
-#define M_USARTx_UDRE_vect SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)
-
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
-#define BYTE 0
-
-#ifndef USBCON
-  // Define constants and variables for buffering incoming serial data.  We're
-  // using a ring buffer (I think), in which rx_buffer_head is the index of the
-  // location to which to write the next incoming character and rx_buffer_tail
-  // is the index of the location from which to read.
-  // 256 is the max limit due to uint8_t head and tail. Use only powers of 2. (...,16,32,64,128,256)
-  #ifndef RX_BUFFER_SIZE
-    #define RX_BUFFER_SIZE 128
-  #endif
-  #ifndef TX_BUFFER_SIZE
-    #define TX_BUFFER_SIZE 32
-  #endif
-  #if !((RX_BUFFER_SIZE == 256) ||(RX_BUFFER_SIZE == 128) ||(RX_BUFFER_SIZE == 64) ||(RX_BUFFER_SIZE == 32) ||(RX_BUFFER_SIZE == 16) ||(RX_BUFFER_SIZE == 8) ||(RX_BUFFER_SIZE == 4) ||(RX_BUFFER_SIZE == 2))
-    #error "RX_BUFFER_SIZE has to be a power of 2 and >= 2"
-  #endif
-  #if !((TX_BUFFER_SIZE == 256) ||(TX_BUFFER_SIZE == 128) ||(TX_BUFFER_SIZE == 64) ||(TX_BUFFER_SIZE == 32) ||(TX_BUFFER_SIZE == 16) ||(TX_BUFFER_SIZE == 8) ||(TX_BUFFER_SIZE == 4) ||(TX_BUFFER_SIZE == 2) ||(TX_BUFFER_SIZE == 0))
-    #error TX_BUFFER_SIZE has to be a power of 2 or 0
-  #endif
-
-  struct ring_buffer_r {
-    unsigned char buffer[RX_BUFFER_SIZE];
-    volatile uint8_t head;
-    volatile uint8_t tail;
-  };
-
-  #if TX_BUFFER_SIZE > 0
-    struct ring_buffer_t {
-      unsigned char buffer[TX_BUFFER_SIZE];
-      volatile uint8_t head;
-      volatile uint8_t tail;
-    };
-  #endif
-
-  #if UART_PRESENT(SERIAL_PORT)
-    extern ring_buffer_r rx_buffer;
-    #if TX_BUFFER_SIZE > 0
-      extern ring_buffer_t tx_buffer;
-    #endif
-  #endif
-
-  class MarlinSerial { //: public Stream
-
-    public:
-      MarlinSerial() {};
-      static void begin(const long);
-      static void end();
-      static int peek(void);
-      static int read(void);
-      static void flush(void);
-      static uint8_t available(void);
-      static void checkRx(void);
-      static void write(const uint8_t c);
-      #if TX_BUFFER_SIZE > 0
-        static uint8_t availableForWrite(void);
-        static void flushTX(void);
-      #endif
-
-    private:
-      static void printNumber(unsigned long, const uint8_t);
-      static void printFloat(double, uint8_t);
-
-    public:
-      static FORCE_INLINE void write(const char* str) { while (*str) write(*str++); }
-      static FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-      static FORCE_INLINE void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-      static FORCE_INLINE void print(const char* str) { write(str); }
-
-      static void print(char, int = BYTE);
-      static void print(unsigned char, int = BYTE);
-      static void print(int, int = DEC);
-      static void print(unsigned int, int = DEC);
-      static void print(long, int = DEC);
-      static void print(unsigned long, int = DEC);
-      static void print(double, int = 2);
-
-      static void println(const String& s);
-      static void println(const char[]);
-      static void println(char, int = BYTE);
-      static void println(unsigned char, int = BYTE);
-      static void println(int, int = DEC);
-      static void println(unsigned int, int = DEC);
-      static void println(long, int = DEC);
-      static void println(unsigned long, int = DEC);
-      static void println(double, int = 2);
-      static void println(void);
-  };
-
-  extern MarlinSerial customizedSerial;
-
-#endif // !USBCON
-
-// Use the UART for Bluetooth in AT90USB configurations
-#if defined(USBCON) && ENABLED(BLUETOOTH)
-  extern HardwareSerial bluetoothSerial;
-#endif
-
-#endif // MARLINSERIAL_H

Marlin/Max7219_Debug_LEDs.cpp

@@ -1,236 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * This module is off by default, but can be enabled to facilitate the display of
- * extra debug information during code development. It assumes the existence of a
- * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
- * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
- *
- * Just connect up +5v and GND to give it power, then connect up the pins assigned
- * in Configuration_adv.h. For example, on the Re-ARM you could use:
- *
- *   #define MAX7219_CLK_PIN   77
- *   #define MAX7219_DIN_PIN   78
- *   #define MAX7219_LOAD_PIN  79
- *
- * Max7219_init() is called automatically at startup, and then there are a number of
- * support functions available to control the LEDs in the 8x8 grid.
- *
- * void Max7219_init();
- * void Max7219_PutByte(uint8_t data);
- * void Max7219(uint8_t reg, uint8_t data);
- * void Max7219_LED_On(uint8_t row, uint8_t col);
- * void Max7219_LED_Off(uint8_t row, uint8_t col);
- * void Max7219_LED_Toggle(uint8_t row, uint8_t col);
- * void Max7219_Clear_Row(uint8_t row);
- * void Max7219_Clear_Column(uint8_t col);
- * void Max7219_Set_Row(uint8_t row, uint8_t val);
- * void Max7219_Set_Column(uint8_t col, uint8_t val);
- * void Max7219_idle_tasks();
- */
-
-#include "MarlinConfig.h"
-
-#if ENABLED(MAX7219_DEBUG)
-
-  #include "Marlin.h"
-  #include "planner.h"
-  #include "stepper.h"
-  #include "Max7219_Debug_LEDs.h"
-
-  static uint8_t LEDs[8] = { 0 };
-
-  void Max7219_PutByte(uint8_t data) {
-    for (uint8_t i = 8; i--;) {
-      WRITE(MAX7219_CLK_PIN, LOW);       // tick
-      WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW);  // send 1 or 0 based on data bit
-      WRITE(MAX7219_CLK_PIN, HIGH);      // tock
-      data <<= 1;
-    }
-  }
-
-  void Max7219(const uint8_t reg, const uint8_t data) {
-    WRITE(MAX7219_LOAD_PIN, LOW);  // begin
-    Max7219_PutByte(reg);          // specify register
-    Max7219_PutByte(data);         // put data
-    WRITE(MAX7219_LOAD_PIN, LOW);  // and tell the chip to load the data
-    WRITE(MAX7219_LOAD_PIN, HIGH);
-  }
-
-  void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
-    if (row > 7 || col > 7) return;
-    if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
-    if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
-    Max7219(8 - row, LEDs[row]);
-  }
-
-  void Max7219_LED_On(const uint8_t row, const uint8_t col) {
-    Max7219_LED_Set(row, col, true);
-  }
-
-  void Max7219_LED_Off(const uint8_t row, const uint8_t col) {
-    Max7219_LED_Set(row, col, false);
-  }
-
-  void Max7219_LED_Toggle(const uint8_t row, const uint8_t col) {
-    if (row > 7 || col > 7) return;
-    if (TEST(LEDs[row], col))
-      Max7219_LED_Off(row, col);
-    else
-      Max7219_LED_On(row, col);
-  }
-
-  void Max7219_Clear_Column(const uint8_t col) {
-    if (col > 7) return;
-    LEDs[col] = 0;
-    Max7219(8 - col, LEDs[col]);
-  }
-
-  void Max7219_Clear_Row(const uint8_t row) {
-    if (row > 7) return;
-    for (uint8_t c = 0; c <= 7; c++)
-      Max7219_LED_Off(c, row);
-  }
-
-  void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
-    if (row > 7) return;
-    for (uint8_t b = 0; b <= 7; b++)
-      if (TEST(val, b))
-        Max7219_LED_On(7 - b, row);
-      else
-        Max7219_LED_Off(7 - b, row);
-  }
-
-  void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
-    if (col > 7) return;
-    LEDs[col] = val;
-    Max7219(8 - col, LEDs[col]);
-  }
-
-  void Max7219_init() {
-    uint8_t i, x, y;
-
-    SET_OUTPUT(MAX7219_DIN_PIN);
-    SET_OUTPUT(MAX7219_CLK_PIN);
-
-    OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
-
-    //initiation of the max 7219
-    Max7219(max7219_reg_scanLimit, 0x07);
-    Max7219(max7219_reg_decodeMode, 0x00);  // using an led matrix (not digits)
-    Max7219(max7219_reg_shutdown, 0x01);    // not in shutdown mode
-    Max7219(max7219_reg_displayTest, 0x00); // no display test
-    Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
-                                                 // range: 0x00 to 0x0F
-    for (i = 0; i <= 7; i++) {      // empty registers, turn all LEDs off
-      LEDs[i] = 0x00;
-      Max7219(i + 1, 0);
-    }
-
-    for (x = 0; x <= 7; x++)        // Do an aesthetically pleasing pattern to fully test
-      for (y = 0; y <= 7; y++) {    // the Max7219 module and LEDs. First, turn them
-        Max7219_LED_On(x, y);       // all on.
-        delay(3);
-      }
-
-    for (x = 0; x <= 7; x++)        // Now, turn them all off.
-      for (y = 0; y <= 7; y++) {
-        Max7219_LED_Off(x, y);
-        delay(3);                   // delay() is OK here. Max7219_init() is only called from
-      }                             // setup() and nothing is running yet.
-
-    delay(150);
-
-    for (x = 8; x--;)               // Now, do the same thing from the opposite direction
-      for (y = 0; y <= 7; y++) {
-        Max7219_LED_On(x, y);
-        delay(2);
-      }
-
-    for (x = 8; x--;)
-      for (y = 0; y <= 7; y++) {
-        Max7219_LED_Off(x, y);
-        delay(2);
-      }
-  }
-
-/**
- * These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
- * There is very little CPU burden added to the system by displaying information within the idle()
- * task.
- *
- * But with that said, if your debugging can be facilitated by making calls into the library from
- * other places in the code, feel free to do it.  The CPU burden for a few calls to toggle an LED
- * or clear a row is not very significant.
- */
-  void Max7219_idle_tasks() {
-    #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
-      static int debug_cnt = 0;
-      if (debug_cnt++ > 100) {
-        Max7219_LED_Toggle(7, 7);
-        debug_cnt = 0;
-      }
-    #endif
-
-    #ifdef MAX7219_DEBUG_STEPPER_HEAD
-      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD);
-      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD + 1);
-      if ( planner.block_buffer_head < 8)
-        Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD);
-      else
-        Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
-    #endif
-
-    #ifdef MAX7219_DEBUG_STEPPER_TAIL
-      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL);
-      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL + 1);
-      if ( planner.block_buffer_tail < 8)
-        Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL );
-      else
-        Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 );
-    #endif
-
-    #ifdef MAX7219_DEBUG_STEPPER_QUEUE
-      static int16_t last_depth = 0;
-      int16_t current_depth = planner.block_buffer_head - planner.block_buffer_tail;
-      if (current_depth != last_depth) {  // usually, no update will be needed.
-        if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
-        NOMORE(current_depth, BLOCK_BUFFER_SIZE);
-        NOMORE(current_depth, 16);        // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
-                                          // of LEDs is enough to see if the buffer is draining
-
-        const uint8_t st = min(current_depth, last_depth),
-                      en = max(current_depth, last_depth);
-        if (current_depth < last_depth)
-          for (uint8_t i = st; i <= en; i++)   // clear the highest order LEDs
-            Max7219_LED_Off(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
-        else
-          for (uint8_t i = st; i <= en; i++)   // set the highest order LEDs
-            Max7219_LED_On(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
-
-        last_depth = current_depth;
-      }
-    #endif
-  }
-
-#endif // MAX7219_DEBUG

Marlin/Max7219_Debug_LEDs.h

@@ -1,88 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * This module is off by default, but can be enabled to facilitate the display of
- * extra debug information during code development. It assumes the existence of a
- * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
- * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
- *
- * Just connect up +5v and GND to give it power, then connect up the pins assigned
- * in Configuration_adv.h. For example, on the Re-ARM you could use:
- *
- *   #define MAX7219_CLK_PIN   77
- *   #define MAX7219_DIN_PIN   78
- *   #define MAX7219_LOAD_PIN  79
- *
- * Max7219_init() is called automatically at startup, and then there are a number of
- * support functions available to control the LEDs in the 8x8 grid.
- *
- * void Max7219_init();
- * void Max7219_PutByte(uint8_t data);
- * void Max7219(uint8_t reg, uint8_t data);
- * void Max7219_LED_Set(uint8_t row, uint8_t col, bool on);
- * void Max7219_LED_On(uint8_t row, uint8_t col);
- * void Max7219_LED_Off(uint8_t row, uint8_t col);
- * void Max7219_LED_Toggle(uint8_t row, uint8_t col);
- * void Max7219_Clear_Row(uint8_t row);
- * void Max7219_Clear_Column(uint8_t col);
- * void Max7219_Set_Row(uint8_t row, uint8_t val);
- * void Max7219_Set_Column(uint8_t col, uint8_t val);
- * void Max7219_idle_tasks();
- */
-
-#ifndef __MAX7219_DEBUG_LEDS_H__
-#define __MAX7219_DEBUG_LEDS_H__
-
-  //
-  // define max7219 registers
-  //
-  #define max7219_reg_noop        0x00
-  #define max7219_reg_digit0      0x01
-  #define max7219_reg_digit1      0x02
-  #define max7219_reg_digit2      0x03
-  #define max7219_reg_digit3      0x04
-  #define max7219_reg_digit4      0x05
-  #define max7219_reg_digit5      0x06
-  #define max7219_reg_digit6      0x07
-  #define max7219_reg_digit7      0x08
-
-  #define max7219_reg_intensity   0x0A
-  #define max7219_reg_displayTest 0x0F
-  #define max7219_reg_decodeMode  0x09
-  #define max7219_reg_scanLimit   0x0B
-  #define max7219_reg_shutdown    0x0C
-
-  void Max7219_init();
-  void Max7219_PutByte(uint8_t data);
-  void Max7219(const uint8_t reg, const uint8_t data);
-  void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on);
-  void Max7219_LED_On(const uint8_t row, const uint8_t col);
-  void Max7219_LED_Off(const uint8_t row, const uint8_t col);
-  void Max7219_LED_Toggle(const uint8_t row, const uint8_t col);
-  void Max7219_Clear_Row(const uint8_t row);
-  void Max7219_Clear_Column(const uint8_t col);
-  void Max7219_Set_Row(const uint8_t row, const uint8_t val);
-  void Max7219_Set_Column(const uint8_t col, const uint8_t val);
-  void Max7219_idle_tasks();
-
-#endif // __MAX7219_DEBUG_LEDS_H__

Marlin/Sd2Card.cpp

@@ -1,729 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino Sd2Card Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-#include "Marlin.h"
-
-#if ENABLED(SDSUPPORT)
-#include "Sd2Card.h"
-
-#if ENABLED(USE_WATCHDOG)
-  #include "watchdog.h"
-#endif
-
-//------------------------------------------------------------------------------
-#if DISABLED(SOFTWARE_SPI)
-  // functions for hardware SPI
-  //------------------------------------------------------------------------------
-  // make sure SPCR rate is in expected bits
-  #if (SPR0 != 0 || SPR1 != 1)
-    #error "unexpected SPCR bits"
-  #endif
-  /**
-   * Initialize hardware SPI
-   * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6]
-   */
-  static void spiInit(uint8_t spiRate) {
-    // See avr processor documentation
-    SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
-    SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
-  }
-  //------------------------------------------------------------------------------
-  /** SPI receive a byte */
-  static uint8_t spiRec() {
-    SPDR = 0xFF;
-    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-    return SPDR;
-  }
-  //------------------------------------------------------------------------------
-  /** SPI read data - only one call so force inline */
-  static inline __attribute__((always_inline))
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
-    if (nbyte-- == 0) return;
-    SPDR = 0xFF;
-    for (uint16_t i = 0; i < nbyte; i++) {
-      while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-      buf[i] = SPDR;
-      SPDR = 0xFF;
-    }
-    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-    buf[nbyte] = SPDR;
-  }
-  //------------------------------------------------------------------------------
-  /** SPI send a byte */
-  static void spiSend(uint8_t b) {
-    SPDR = b;
-    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-  }
-  //------------------------------------------------------------------------------
-  /** SPI send block - only one call so force inline */
-  static inline __attribute__((always_inline))
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
-    SPDR = token;
-    for (uint16_t i = 0; i < 512; i += 2) {
-      while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-      SPDR = buf[i];
-      while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-      SPDR = buf[i + 1];
-    }
-    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
-  }
-       //------------------------------------------------------------------------------
-#else  // SOFTWARE_SPI
-       //------------------------------------------------------------------------------
-  /** nop to tune soft SPI timing */
-  #define nop asm volatile ("nop\n\t")
-  //------------------------------------------------------------------------------
-  /** Soft SPI receive byte */
-  static uint8_t spiRec() {
-    uint8_t data = 0;
-    // no interrupts during byte receive - about 8 us
-    cli();
-    // output pin high - like sending 0xFF
-    WRITE(SPI_MOSI_PIN, HIGH);
-
-    for (uint8_t i = 0; i < 8; i++) {
-      WRITE(SPI_SCK_PIN, HIGH);
-
-      // adjust so SCK is nice
-      nop;
-      nop;
-
-      data <<= 1;
-
-      if (READ(SPI_MISO_PIN)) data |= 1;
-
-      WRITE(SPI_SCK_PIN, LOW);
-    }
-    // enable interrupts
-    sei();
-    return data;
-  }
-  //------------------------------------------------------------------------------
-  /** Soft SPI read data */
-  static void spiRead(uint8_t* buf, uint16_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++)
-      buf[i] = spiRec();
-  }
-  //------------------------------------------------------------------------------
-  /** Soft SPI send byte */
-  static void spiSend(uint8_t data) {
-    // no interrupts during byte send - about 8 us
-    cli();
-    for (uint8_t i = 0; i < 8; i++) {
-      WRITE(SPI_SCK_PIN, LOW);
-
-      WRITE(SPI_MOSI_PIN, data & 0x80);
-
-      data <<= 1;
-
-      WRITE(SPI_SCK_PIN, HIGH);
-    }
-    // hold SCK high for a few ns
-    nop;
-    nop;
-    nop;
-    nop;
-
-    WRITE(SPI_SCK_PIN, LOW);
-    // enable interrupts
-    sei();
-  }
-  //------------------------------------------------------------------------------
-  /** Soft SPI send block */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
-    spiSend(token);
-    for (uint16_t i = 0; i < 512; i++)
-      spiSend(buf[i]);
-  }
-#endif  // SOFTWARE_SPI
-//------------------------------------------------------------------------------
-// send command and return error code.  Return zero for OK
-uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) {
-  // select card
-  chipSelectLow();
-
-  // wait up to 300 ms if busy
-  waitNotBusy(300);
-
-  // send command
-  spiSend(cmd | 0x40);
-
-  // send argument
-  for (int8_t s = 24; s >= 0; s -= 8) spiSend(arg >> s);
-
-  // send CRC
-  uint8_t crc = 0xFF;
-  if (cmd == CMD0) crc = 0x95;  // correct crc for CMD0 with arg 0
-  if (cmd == CMD8) crc = 0x87;  // correct crc for CMD8 with arg 0x1AA
-  spiSend(crc);
-
-  // skip stuff byte for stop read
-  if (cmd == CMD12) spiRec();
-
-  // wait for response
-  for (uint8_t i = 0; ((status_ = spiRec()) & 0x80) && i != 0xFF; i++) { /* Intentionally left empty */ }
-  return status_;
-}
-//------------------------------------------------------------------------------
-/**
- * Determine the size of an SD flash memory card.
- *
- * \return The number of 512 byte data blocks in the card
- *         or zero if an error occurs.
- */
-uint32_t Sd2Card::cardSize() {
-  csd_t csd;
-  if (!readCSD(&csd)) return 0;
-  if (csd.v1.csd_ver == 0) {
-    uint8_t read_bl_len = csd.v1.read_bl_len;
-    uint16_t c_size = (csd.v1.c_size_high << 10)
-                      | (csd.v1.c_size_mid << 2) | csd.v1.c_size_low;
-    uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1)
-                          | csd.v1.c_size_mult_low;
-    return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7);
-  }
-  else if (csd.v2.csd_ver == 1) {
-    uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16)
-                      | (csd.v2.c_size_mid << 8) | csd.v2.c_size_low;
-    return (c_size + 1) << 10;
-  }
-  else {
-    error(SD_CARD_ERROR_BAD_CSD);
-    return 0;
-  }
-}
-//------------------------------------------------------------------------------
-void Sd2Card::chipSelectHigh() {
-  digitalWrite(chipSelectPin_, HIGH);
-}
-//------------------------------------------------------------------------------
-void Sd2Card::chipSelectLow() {
-  #if DISABLED(SOFTWARE_SPI)
-    spiInit(spiRate_);
-  #endif  // SOFTWARE_SPI
-  digitalWrite(chipSelectPin_, LOW);
-}
-//------------------------------------------------------------------------------
-/** Erase a range of blocks.
- *
- * \param[in] firstBlock The address of the first block in the range.
- * \param[in] lastBlock The address of the last block in the range.
- *
- * \note This function requests the SD card to do a flash erase for a
- * range of blocks.  The data on the card after an erase operation is
- * either 0 or 1, depends on the card vendor.  The card must support
- * single block erase.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
-  csd_t csd;
-  if (!readCSD(&csd)) goto FAIL;
-  // check for single block erase
-  if (!csd.v1.erase_blk_en) {
-    // erase size mask
-    uint8_t m = (csd.v1.sector_size_high << 1) | csd.v1.sector_size_low;
-    if ((firstBlock & m) != 0 || ((lastBlock + 1) & m) != 0) {
-      // error card can't erase specified area
-      error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK);
-      goto FAIL;
-    }
-  }
-  if (type_ != SD_CARD_TYPE_SDHC) {
-    firstBlock <<= 9;
-    lastBlock <<= 9;
-  }
-  if (cardCommand(CMD32, firstBlock)
-      || cardCommand(CMD33, lastBlock)
-      || cardCommand(CMD38, 0)) {
-    error(SD_CARD_ERROR_ERASE);
-    goto FAIL;
-  }
-  if (!waitNotBusy(SD_ERASE_TIMEOUT)) {
-    error(SD_CARD_ERROR_ERASE_TIMEOUT);
-    goto FAIL;
-  }
-  chipSelectHigh();
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Determine if card supports single block erase.
- *
- * \return The value one, true, is returned if single block erase is supported.
- * The value zero, false, is returned if single block erase is not supported.
- */
-bool Sd2Card::eraseSingleBlockEnable() {
-  csd_t csd;
-  return readCSD(&csd) ? csd.v1.erase_blk_en : false;
-}
-//------------------------------------------------------------------------------
-/**
- * Initialize an SD flash memory card.
- *
- * \param[in] sckRateID SPI clock rate selector. See setSckRate().
- * \param[in] chipSelectPin SD chip select pin number.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.  The reason for failure
- * can be determined by calling errorCode() and errorData().
- */
-bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
-  errorCode_ = type_ = 0;
-  chipSelectPin_ = chipSelectPin;
-  // 16-bit init start time allows over a minute
-  uint16_t t0 = (uint16_t)millis();
-  uint32_t arg;
-
-  // If init takes more than 4s it could trigger
-  // watchdog leading to a reboot loop.
-  #if ENABLED(USE_WATCHDOG)
-    watchdog_reset();
-  #endif
-
-  // set pin modes
-  pinMode(chipSelectPin_, OUTPUT);
-  chipSelectHigh();
-  SET_INPUT(SPI_MISO_PIN);
-  SET_OUTPUT(SPI_MOSI_PIN);
-  SET_OUTPUT(SPI_SCK_PIN);
-
-  #if DISABLED(SOFTWARE_SPI)
-    // SS must be in output mode even it is not chip select
-    SET_OUTPUT(SS_PIN);
-    // set SS high - may be chip select for another SPI device
-    #if SET_SPI_SS_HIGH
-      WRITE(SS_PIN, HIGH);
-    #endif  // SET_SPI_SS_HIGH
-    // set SCK rate for initialization commands
-    spiRate_ = SPI_SD_INIT_RATE;
-    spiInit(spiRate_);
-  #endif  // SOFTWARE_SPI
-
-  // must supply min of 74 clock cycles with CS high.
-  for (uint8_t i = 0; i < 10; i++) spiSend(0xFF);
-
-  // command to go idle in SPI mode
-  while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) {
-    if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {
-      error(SD_CARD_ERROR_CMD0);
-      goto FAIL;
-    }
-  }
-  // check SD version
-  if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) {
-    type(SD_CARD_TYPE_SD1);
-  }
-  else {
-    // only need last byte of r7 response
-    for (uint8_t i = 0; i < 4; i++) status_ = spiRec();
-    if (status_ != 0xAA) {
-      error(SD_CARD_ERROR_CMD8);
-      goto FAIL;
-    }
-    type(SD_CARD_TYPE_SD2);
-  }
-  // initialize card and send host supports SDHC if SD2
-  arg = type() == SD_CARD_TYPE_SD2 ? 0x40000000 : 0;
-
-  while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) {
-    // check for timeout
-    if (((uint16_t)millis() - t0) > SD_INIT_TIMEOUT) {
-      error(SD_CARD_ERROR_ACMD41);
-      goto FAIL;
-    }
-  }
-  // if SD2 read OCR register to check for SDHC card
-  if (type() == SD_CARD_TYPE_SD2) {
-    if (cardCommand(CMD58, 0)) {
-      error(SD_CARD_ERROR_CMD58);
-      goto FAIL;
-    }
-    if ((spiRec() & 0xC0) == 0xC0) type(SD_CARD_TYPE_SDHC);
-    // discard rest of ocr - contains allowed voltage range
-    for (uint8_t i = 0; i < 3; i++) spiRec();
-  }
-  chipSelectHigh();
-
-  #if DISABLED(SOFTWARE_SPI)
-    return setSckRate(sckRateID);
-  #else  // SOFTWARE_SPI
-    UNUSED(sckRateID);
-    return true;
-  #endif  // SOFTWARE_SPI
-
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/**
- * Read a 512 byte block from an SD card.
- *
- * \param[in] blockNumber Logical block to be read.
- * \param[out] dst Pointer to the location that will receive the data.
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
-  // use address if not SDHC card
-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
-
-  #if ENABLED(SD_CHECK_AND_RETRY)
-    uint8_t retryCnt = 3;
-    do {
-      if (!cardCommand(CMD17, blockNumber)) {
-        if (readData(dst, 512)) return true;
-      }
-      else
-        error(SD_CARD_ERROR_CMD17);
-
-      if (!--retryCnt) break;
-
-      chipSelectHigh();
-      cardCommand(CMD12, 0); // Try sending a stop command, ignore the result.
-      errorCode_ = 0;
-    } while (true);
-  #else
-    if (cardCommand(CMD17, blockNumber))
-      error(SD_CARD_ERROR_CMD17);
-    else
-      return readData(dst, 512);
-  #endif
-
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Read one data block in a multiple block read sequence
- *
- * \param[in] dst Pointer to the location for the data to be read.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::readData(uint8_t* dst) {
-  chipSelectLow();
-  return readData(dst, 512);
-}
-
-#if ENABLED(SD_CHECK_AND_RETRY)
-static const uint16_t crctab[] PROGMEM = {
-  0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7,
-  0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF,
-  0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6,
-  0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE,
-  0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485,
-  0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D,
-  0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4,
-  0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC,
-  0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823,
-  0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B,
-  0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12,
-  0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A,
-  0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41,
-  0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49,
-  0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70,
-  0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78,
-  0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F,
-  0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067,
-  0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E,
-  0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256,
-  0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D,
-  0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405,
-  0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C,
-  0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634,
-  0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB,
-  0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3,
-  0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A,
-  0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92,
-  0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9,
-  0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1,
-  0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8,
-  0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0
-};
-static uint16_t CRC_CCITT(const uint8_t* data, size_t n) {
-  uint16_t crc = 0;
-  for (size_t i = 0; i < n; i++) {
-    crc = pgm_read_word(&crctab[(crc >> 8 ^ data[i]) & 0xFF]) ^ (crc << 8);
-  }
-  return crc;
-}
-#endif
-
-//------------------------------------------------------------------------------
-bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
-  // wait for start block token
-  uint16_t t0 = millis();
-  while ((status_ = spiRec()) == 0XFF) {
-    if (((uint16_t)millis() - t0) > SD_READ_TIMEOUT) {
-      error(SD_CARD_ERROR_READ_TIMEOUT);
-      goto FAIL;
-    }
-  }
-  if (status_ != DATA_START_BLOCK) {
-    error(SD_CARD_ERROR_READ);
-    goto FAIL;
-  }
-  // transfer data
-  spiRead(dst, count);
-
-#if ENABLED(SD_CHECK_AND_RETRY)
-  {
-    uint16_t calcCrc = CRC_CCITT(dst, count);
-    uint16_t recvCrc = spiRec() << 8;
-    recvCrc |= spiRec();
-    if (calcCrc != recvCrc) {
-      error(SD_CARD_ERROR_CRC);
-      goto FAIL;
-    }
-  }
-#else
-  // discard CRC
-  spiRec();
-  spiRec();
-#endif
-  chipSelectHigh();
-  // Send an additional dummy byte, required by Toshiba Flash Air SD Card
-  spiSend(0XFF);
-  return true;
-  FAIL:
-  chipSelectHigh();
-  // Send an additional dummy byte, required by Toshiba Flash Air SD Card
-  spiSend(0XFF);
-  return false;
-}
-//------------------------------------------------------------------------------
-/** read CID or CSR register */
-bool Sd2Card::readRegister(uint8_t cmd, void* buf) {
-  uint8_t* dst = reinterpret_cast<uint8_t*>(buf);
-  if (cardCommand(cmd, 0)) {
-    error(SD_CARD_ERROR_READ_REG);
-    goto FAIL;
-  }
-  return readData(dst, 16);
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Start a read multiple blocks sequence.
- *
- * \param[in] blockNumber Address of first block in sequence.
- *
- * \note This function is used with readData() and readStop() for optimized
- * multiple block reads.  SPI chipSelect must be low for the entire sequence.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::readStart(uint32_t blockNumber) {
-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
-  if (cardCommand(CMD18, blockNumber)) {
-    error(SD_CARD_ERROR_CMD18);
-    goto FAIL;
-  }
-  chipSelectHigh();
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** End a read multiple blocks sequence.
- *
-* \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::readStop() {
-  chipSelectLow();
-  if (cardCommand(CMD12, 0)) {
-    error(SD_CARD_ERROR_CMD12);
-    goto FAIL;
-  }
-  chipSelectHigh();
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/**
- * Set the SPI clock rate.
- *
- * \param[in] sckRateID A value in the range [0, 6].
- *
- * The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum
- * SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128
- * for \a scsRateID = 6.
- *
- * \return The value one, true, is returned for success and the value zero,
- * false, is returned for an invalid value of \a sckRateID.
- */
-bool Sd2Card::setSckRate(uint8_t sckRateID) {
-  if (sckRateID > 6) {
-    error(SD_CARD_ERROR_SCK_RATE);
-    return false;
-  }
-  spiRate_ = sckRateID;
-  return true;
-}
-//------------------------------------------------------------------------------
-// wait for card to go not busy
-bool Sd2Card::waitNotBusy(uint16_t timeoutMillis) {
-  uint16_t t0 = millis();
-  while (spiRec() != 0XFF) {
-    if (((uint16_t)millis() - t0) >= timeoutMillis) goto FAIL;
-  }
-  return true;
-  FAIL:
-  return false;
-}
-//------------------------------------------------------------------------------
-/**
- * Writes a 512 byte block to an SD card.
- *
- * \param[in] blockNumber Logical block to be written.
- * \param[in] src Pointer to the location of the data to be written.
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
-  // use address if not SDHC card
-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
-  if (cardCommand(CMD24, blockNumber)) {
-    error(SD_CARD_ERROR_CMD24);
-    goto FAIL;
-  }
-  if (!writeData(DATA_START_BLOCK, src)) goto FAIL;
-
-  // wait for flash programming to complete
-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
-    error(SD_CARD_ERROR_WRITE_TIMEOUT);
-    goto FAIL;
-  }
-  // response is r2 so get and check two bytes for nonzero
-  if (cardCommand(CMD13, 0) || spiRec()) {
-    error(SD_CARD_ERROR_WRITE_PROGRAMMING);
-    goto FAIL;
-  }
-  chipSelectHigh();
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Write one data block in a multiple block write sequence
- * \param[in] src Pointer to the location of the data to be written.
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::writeData(const uint8_t* src) {
-  chipSelectLow();
-  // wait for previous write to finish
-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
-  if (!writeData(WRITE_MULTIPLE_TOKEN, src)) goto FAIL;
-  chipSelectHigh();
-  return true;
-  FAIL:
-  error(SD_CARD_ERROR_WRITE_MULTIPLE);
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-// send one block of data for write block or write multiple blocks
-bool Sd2Card::writeData(uint8_t token, const uint8_t* src) {
-  spiSendBlock(token, src);
-
-  spiSend(0xFF);  // dummy crc
-  spiSend(0xFF);  // dummy crc
-
-  status_ = spiRec();
-  if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) {
-    error(SD_CARD_ERROR_WRITE);
-    goto FAIL;
-  }
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Start a write multiple blocks sequence.
- *
- * \param[in] blockNumber Address of first block in sequence.
- * \param[in] eraseCount The number of blocks to be pre-erased.
- *
- * \note This function is used with writeData() and writeStop()
- * for optimized multiple block writes.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {
-  // send pre-erase count
-  if (cardAcmd(ACMD23, eraseCount)) {
-    error(SD_CARD_ERROR_ACMD23);
-    goto FAIL;
-  }
-  // use address if not SDHC card
-  if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
-  if (cardCommand(CMD25, blockNumber)) {
-    error(SD_CARD_ERROR_CMD25);
-    goto FAIL;
-  }
-  chipSelectHigh();
-  return true;
-  FAIL:
-  chipSelectHigh();
-  return false;
-}
-//------------------------------------------------------------------------------
-/** End a write multiple blocks sequence.
- *
-* \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.
- */
-bool Sd2Card::writeStop() {
-  chipSelectLow();
-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
-  spiSend(STOP_TRAN_TOKEN);
-  if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
-  chipSelectHigh();
-  return true;
-  FAIL:
-  error(SD_CARD_ERROR_STOP_TRAN);
-  chipSelectHigh();
-  return false;
-}
-
-#endif

Marlin/Sd2Card.h

@@ -1,251 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino Sd2Card Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-
-#include "Marlin.h"
-#if ENABLED(SDSUPPORT)
-
-#ifndef Sd2Card_h
-#define Sd2Card_h
-/**
- * \file
- * \brief Sd2Card class for V2 SD/SDHC cards
- */
-#include "SdFatConfig.h"
-#include "SdInfo.h"
-//------------------------------------------------------------------------------
-// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
-/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
-uint8_t const SPI_FULL_SPEED = 0;
-/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
-uint8_t const SPI_HALF_SPEED = 1;
-/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */
-uint8_t const SPI_QUARTER_SPEED = 2;
-/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */
-uint8_t const SPI_EIGHTH_SPEED = 3;
-/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */
-uint8_t const SPI_SIXTEENTH_SPEED = 4;
-//------------------------------------------------------------------------------
-/** init timeout ms */
-uint16_t const SD_INIT_TIMEOUT = 2000;
-/** erase timeout ms */
-uint16_t const SD_ERASE_TIMEOUT = 10000;
-/** read timeout ms */
-uint16_t const SD_READ_TIMEOUT = 300;
-/** write time out ms */
-uint16_t const SD_WRITE_TIMEOUT = 600;
-//------------------------------------------------------------------------------
-// SD card errors
-/** timeout error for command CMD0 (initialize card in SPI mode) */
-uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
-/** CMD8 was not accepted - not a valid SD card*/
-uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
-/** card returned an error response for CMD12 (write stop) */
-uint8_t const SD_CARD_ERROR_CMD12 = 0X3;
-/** card returned an error response for CMD17 (read block) */
-uint8_t const SD_CARD_ERROR_CMD17 = 0X4;
-/** card returned an error response for CMD18 (read multiple block) */
-uint8_t const SD_CARD_ERROR_CMD18 = 0X5;
-/** card returned an error response for CMD24 (write block) */
-uint8_t const SD_CARD_ERROR_CMD24 = 0X6;
-/**  WRITE_MULTIPLE_BLOCKS command failed */
-uint8_t const SD_CARD_ERROR_CMD25 = 0X7;
-/** card returned an error response for CMD58 (read OCR) */
-uint8_t const SD_CARD_ERROR_CMD58 = 0X8;
-/** SET_WR_BLK_ERASE_COUNT failed */
-uint8_t const SD_CARD_ERROR_ACMD23 = 0X9;
-/** ACMD41 initialization process timeout */
-uint8_t const SD_CARD_ERROR_ACMD41 = 0XA;
-/** card returned a bad CSR version field */
-uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB;
-/** erase block group command failed */
-uint8_t const SD_CARD_ERROR_ERASE = 0XC;
-/** card not capable of single block erase */
-uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD;
-/** Erase sequence timed out */
-uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE;
-/** card returned an error token instead of read data */
-uint8_t const SD_CARD_ERROR_READ = 0XF;
-/** read CID or CSD failed */
-uint8_t const SD_CARD_ERROR_READ_REG = 0x10;
-/** timeout while waiting for start of read data */
-uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0x11;
-/** card did not accept STOP_TRAN_TOKEN */
-uint8_t const SD_CARD_ERROR_STOP_TRAN = 0x12;
-/** card returned an error token as a response to a write operation */
-uint8_t const SD_CARD_ERROR_WRITE = 0x13;
-/** attempt to write protected block zero */
-uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14;  // REMOVE - not used
-/** card did not go ready for a multiple block write */
-uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0x15;
-/** card returned an error to a CMD13 status check after a write */
-uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16;
-/** timeout occurred during write programming */
-uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0x17;
-/** incorrect rate selected */
-uint8_t const SD_CARD_ERROR_SCK_RATE = 0x18;
-/** init() not called */
-uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0x19;
-/** crc check error */
-uint8_t const SD_CARD_ERROR_CRC = 0x20;
-//------------------------------------------------------------------------------
-// card types
-/** Standard capacity V1 SD card */
-uint8_t const SD_CARD_TYPE_SD1  = 1;
-/** Standard capacity V2 SD card */
-uint8_t const SD_CARD_TYPE_SD2  = 2;
-/** High Capacity SD card */
-uint8_t const SD_CARD_TYPE_SDHC = 3;
-/**
- * define SOFTWARE_SPI to use bit-bang SPI
- */
-//------------------------------------------------------------------------------
-#if MEGA_SOFT_SPI
-  #define SOFTWARE_SPI
-#elif USE_SOFTWARE_SPI
-  #define SOFTWARE_SPI
-#endif  // MEGA_SOFT_SPI
-//------------------------------------------------------------------------------
-// SPI pin definitions - do not edit here - change in SdFatConfig.h
-//
-#if DISABLED(SOFTWARE_SPI)
-  // hardware pin defs
-  /** The default chip select pin for the SD card is SS. */
-  #define SD_CHIP_SELECT_PIN SS_PIN
-  // The following three pins must not be redefined for hardware SPI.
-  /** SPI Master Out Slave In pin */
-  #define SPI_MOSI_PIN MOSI_PIN
-  /** SPI Master In Slave Out pin */
-  #define SPI_MISO_PIN MISO_PIN
-  /** SPI Clock pin */
-  #define SPI_SCK_PIN SCK_PIN
-
-#else  // SOFTWARE_SPI
-
-  /** SPI chip select pin */
-  #define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN
-  /** SPI Master Out Slave In pin */
-  #define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN
-  /** SPI Master In Slave Out pin */
-  #define SPI_MISO_PIN SOFT_SPI_MISO_PIN
-  /** SPI Clock pin */
-  #define SPI_SCK_PIN SOFT_SPI_SCK_PIN
-#endif  // SOFTWARE_SPI
-//------------------------------------------------------------------------------
-/**
- * \class Sd2Card
- * \brief Raw access to SD and SDHC flash memory cards.
- */
-class Sd2Card {
- public:
-  /** Construct an instance of Sd2Card. */
-  Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
-  uint32_t cardSize();
-  bool erase(uint32_t firstBlock, uint32_t lastBlock);
-  bool eraseSingleBlockEnable();
-  /**
-   *  Set SD error code.
-   *  \param[in] code value for error code.
-   */
-  void error(uint8_t code) {errorCode_ = code;}
-  /**
-   * \return error code for last error. See Sd2Card.h for a list of error codes.
-   */
-  int errorCode() const {return errorCode_;}
-  /** \return error data for last error. */
-  int errorData() const {return status_;}
-  /**
-   * Initialize an SD flash memory card with default clock rate and chip
-   * select pin.  See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
-   *
-   * \return true for success or false for failure.
-   */
-  bool init(uint8_t sckRateID = SPI_FULL_SPEED,
-            uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
-  bool readBlock(uint32_t block, uint8_t* dst);
-  /**
-   * Read a card's CID register. The CID contains card identification
-   * information such as Manufacturer ID, Product name, Product serial
-   * number and Manufacturing date.
-   *
-   * \param[out] cid pointer to area for returned data.
-   *
-   * \return true for success or false for failure.
-   */
-  bool readCID(cid_t* cid) {
-    return readRegister(CMD10, cid);
-  }
-  /**
-   * Read a card's CSD register. The CSD contains Card-Specific Data that
-   * provides information regarding access to the card's contents.
-   *
-   * \param[out] csd pointer to area for returned data.
-   *
-   * \return true for success or false for failure.
-   */
-  bool readCSD(csd_t* csd) {
-    return readRegister(CMD9, csd);
-  }
-  bool readData(uint8_t* dst);
-  bool readStart(uint32_t blockNumber);
-  bool readStop();
-  bool setSckRate(uint8_t sckRateID);
-  /** Return the card type: SD V1, SD V2 or SDHC
-   * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
-   */
-  int type() const {return type_;}
-  bool writeBlock(uint32_t blockNumber, const uint8_t* src);
-  bool writeData(const uint8_t* src);
-  bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
-  bool writeStop();
- private:
-  //----------------------------------------------------------------------------
-  uint8_t chipSelectPin_;
-  uint8_t errorCode_;
-  uint8_t spiRate_;
-  uint8_t status_;
-  uint8_t type_;
-  // private functions
-  uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
-    cardCommand(CMD55, 0);
-    return cardCommand(cmd, arg);
-  }
-  uint8_t cardCommand(uint8_t cmd, uint32_t arg);
-
-  bool readData(uint8_t* dst, uint16_t count);
-  bool readRegister(uint8_t cmd, void* buf);
-  void chipSelectHigh();
-  void chipSelectLow();
-  void type(uint8_t value) {type_ = value;}
-  bool waitNotBusy(uint16_t timeoutMillis);
-  bool writeData(uint8_t token, const uint8_t* src);
-};
-#endif  // Sd2Card_h
-
-
-#endif

Marlin/SdBaseFile.h

@@ -1,492 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-#include "Marlin.h"
-#if ENABLED(SDSUPPORT)
-
-#ifndef SdBaseFile_h
-#define SdBaseFile_h
-/**
- * \file
- * \brief SdBaseFile class
- */
-#include "Marlin.h"
-#include "SdFatConfig.h"
-#include "SdVolume.h"
-//------------------------------------------------------------------------------
-/**
- * \struct filepos_t
- * \brief internal type for istream
- * do not use in user apps
- */
-struct filepos_t {
-  /** stream position */
-  uint32_t position;
-  /** cluster for position */
-  uint32_t cluster;
-  filepos_t() : position(0), cluster(0) {}
-};
-
-// use the gnu style oflag in open()
-/** open() oflag for reading */
-uint8_t const O_READ = 0x01;
-/** open() oflag - same as O_IN */
-uint8_t const O_RDONLY = O_READ;
-/** open() oflag for write */
-uint8_t const O_WRITE = 0x02;
-/** open() oflag - same as O_WRITE */
-uint8_t const O_WRONLY = O_WRITE;
-/** open() oflag for reading and writing */
-uint8_t const O_RDWR = (O_READ | O_WRITE);
-/** open() oflag mask for access modes */
-uint8_t const O_ACCMODE = (O_READ | O_WRITE);
-/** The file offset shall be set to the end of the file prior to each write. */
-uint8_t const O_APPEND = 0x04;
-/** synchronous writes - call sync() after each write */
-uint8_t const O_SYNC = 0x08;
-/** truncate the file to zero length */
-uint8_t const O_TRUNC = 0x10;
-/** set the initial position at the end of the file */
-uint8_t const O_AT_END = 0x20;
-/** create the file if nonexistent */
-uint8_t const O_CREAT = 0x40;
-/** If O_CREAT and O_EXCL are set, open() shall fail if the file exists */
-uint8_t const O_EXCL = 0x80;
-
-// SdBaseFile class static and const definitions
-// flags for ls()
-/** ls() flag to print modify date */
-uint8_t const LS_DATE = 1;
-/** ls() flag to print file size */
-uint8_t const LS_SIZE = 2;
-/** ls() flag for recursive list of subdirectories */
-uint8_t const LS_R = 4;
-
-
-// flags for timestamp
-/** set the file's last access date */
-uint8_t const T_ACCESS = 1;
-/** set the file's creation date and time */
-uint8_t const T_CREATE = 2;
-/** Set the file's write date and time */
-uint8_t const T_WRITE = 4;
-// values for type_
-/** This file has not been opened. */
-uint8_t const FAT_FILE_TYPE_CLOSED = 0;
-/** A normal file */
-uint8_t const FAT_FILE_TYPE_NORMAL = 1;
-/** A FAT12 or FAT16 root directory */
-uint8_t const FAT_FILE_TYPE_ROOT_FIXED = 2;
-/** A FAT32 root directory */
-uint8_t const FAT_FILE_TYPE_ROOT32 = 3;
-/** A subdirectory file*/
-uint8_t const FAT_FILE_TYPE_SUBDIR = 4;
-/** Test value for directory type */
-uint8_t const FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT_FIXED;
-
-/** date field for FAT directory entry
- * \param[in] year [1980,2107]
- * \param[in] month [1,12]
- * \param[in] day [1,31]
- *
- * \return Packed date for dir_t entry.
- */
-static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) {
-  return (year - 1980) << 9 | month << 5 | day;
-}
-/** year part of FAT directory date field
- * \param[in] fatDate Date in packed dir format.
- *
- * \return Extracted year [1980,2107]
- */
-static inline uint16_t FAT_YEAR(uint16_t fatDate) {
-  return 1980 + (fatDate >> 9);
-}
-/** month part of FAT directory date field
- * \param[in] fatDate Date in packed dir format.
- *
- * \return Extracted month [1,12]
- */
-static inline uint8_t FAT_MONTH(uint16_t fatDate) {
-  return (fatDate >> 5) & 0XF;
-}
-/** day part of FAT directory date field
- * \param[in] fatDate Date in packed dir format.
- *
- * \return Extracted day [1,31]
- */
-static inline uint8_t FAT_DAY(uint16_t fatDate) {
-  return fatDate & 0x1F;
-}
-/** time field for FAT directory entry
- * \param[in] hour [0,23]
- * \param[in] minute [0,59]
- * \param[in] second [0,59]
- *
- * \return Packed time for dir_t entry.
- */
-static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) {
-  return hour << 11 | minute << 5 | second >> 1;
-}
-/** hour part of FAT directory time field
- * \param[in] fatTime Time in packed dir format.
- *
- * \return Extracted hour [0,23]
- */
-static inline uint8_t FAT_HOUR(uint16_t fatTime) {
-  return fatTime >> 11;
-}
-/** minute part of FAT directory time field
- * \param[in] fatTime Time in packed dir format.
- *
- * \return Extracted minute [0,59]
- */
-static inline uint8_t FAT_MINUTE(uint16_t fatTime) {
-  return (fatTime >> 5) & 0x3F;
-}
-/** second part of FAT directory time field
- * Note second/2 is stored in packed time.
- *
- * \param[in] fatTime Time in packed dir format.
- *
- * \return Extracted second [0,58]
- */
-static inline uint8_t FAT_SECOND(uint16_t fatTime) {
-  return 2 * (fatTime & 0x1F);
-}
-/** Default date for file timestamps is 1 Jan 2000 */
-uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
-/** Default time for file timestamp is 1 am */
-uint16_t const FAT_DEFAULT_TIME = (1 << 11);
-//------------------------------------------------------------------------------
-/**
- * \class SdBaseFile
- * \brief Base class for SdFile with Print and C++ streams.
- */
-class SdBaseFile {
- public:
-  /** Create an instance. */
-  SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {}
-  SdBaseFile(const char* path, uint8_t oflag);
-  ~SdBaseFile() {if (isOpen()) close();}
-  /**
-   * writeError is set to true if an error occurs during a write().
-   * Set writeError to false before calling print() and/or write() and check
-   * for true after calls to print() and/or write().
-   */
-  bool writeError;
-  //----------------------------------------------------------------------------
-  // helpers for stream classes
-  /** get position for streams
-   * \param[out] pos struct to receive position
-   */
-  void getpos(filepos_t* pos);
-  /** set position for streams
-   * \param[out] pos struct with value for new position
-   */
-  void setpos(filepos_t* pos);
-  //----------------------------------------------------------------------------
-  bool close();
-  bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
-  bool createContiguous(SdBaseFile* dirFile,
-                        const char* path, uint32_t size);
-  /** \return The current cluster number for a file or directory. */
-  uint32_t curCluster() const {return curCluster_;}
-  /** \return The current position for a file or directory. */
-  uint32_t curPosition() const {return curPosition_;}
-  /** \return Current working directory */
-  static SdBaseFile* cwd() {return cwd_;}
-  /** Set the date/time callback function
-   *
-   * \param[in] dateTime The user's call back function.  The callback
-   * function is of the form:
-   *
-   * \code
-   * void dateTime(uint16_t* date, uint16_t* time) {
-   *   uint16_t year;
-   *   uint8_t month, day, hour, minute, second;
-   *
-   *   // User gets date and time from GPS or real-time clock here
-   *
-   *   // return date using FAT_DATE macro to format fields
-   *   *date = FAT_DATE(year, month, day);
-   *
-   *   // return time using FAT_TIME macro to format fields
-   *   *time = FAT_TIME(hour, minute, second);
-   * }
-   * \endcode
-   *
-   * Sets the function that is called when a file is created or when
-   * a file's directory entry is modified by sync(). All timestamps,
-   * access, creation, and modify, are set when a file is created.
-   * sync() maintains the last access date and last modify date/time.
-   *
-   * See the timestamp() function.
-   */
-  static void dateTimeCallback(
-    void (*dateTime)(uint16_t* date, uint16_t* time)) {
-    dateTime_ = dateTime;
-  }
-  /**  Cancel the date/time callback function. */
-  static void dateTimeCallbackCancel() {dateTime_ = 0;}
-  bool dirEntry(dir_t* dir);
-  static void dirName(const dir_t& dir, char* name);
-  bool exists(const char* name);
-  int16_t fgets(char* str, int16_t num, char* delim = 0);
-  /** \return The total number of bytes in a file or directory. */
-  uint32_t fileSize() const {return fileSize_;}
-  /** \return The first cluster number for a file or directory. */
-  uint32_t firstCluster() const {return firstCluster_;}
-  bool getFilename(char* name);
-  /** \return True if this is a directory else false. */
-  bool isDir() const {return type_ >= FAT_FILE_TYPE_MIN_DIR;}
-  /** \return True if this is a normal file else false. */
-  bool isFile() const {return type_ == FAT_FILE_TYPE_NORMAL;}
-  /** \return True if this is an open file/directory else false. */
-  bool isOpen() const {return type_ != FAT_FILE_TYPE_CLOSED;}
-  /** \return True if this is a subdirectory else false. */
-  bool isSubDir() const {return type_ == FAT_FILE_TYPE_SUBDIR;}
-  /** \return True if this is the root directory. */
-  bool isRoot() const {
-    return type_ == FAT_FILE_TYPE_ROOT_FIXED || type_ == FAT_FILE_TYPE_ROOT32;
-  }
-  void ls(uint8_t flags = 0, uint8_t indent = 0);
-  bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true);
-  // alias for backward compactability
-  bool makeDir(SdBaseFile* dir, const char* path) {
-    return mkdir(dir, path, false);
-  }
-  bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag);
-  bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag);
-  bool open(const char* path, uint8_t oflag = O_READ);
-  bool openNext(SdBaseFile* dirFile, uint8_t oflag);
-  bool openRoot(SdVolume* vol);
-  int peek();
-  static void printFatDate(uint16_t fatDate);
-  static void printFatTime(uint16_t fatTime);
-  bool printName();
-  int16_t read();
-  int16_t read(void* buf, uint16_t nbyte);
-  int8_t readDir(dir_t* dir, char* longFilename);
-  static bool remove(SdBaseFile* dirFile, const char* path);
-  bool remove();
-  /** Set the file's current position to zero. */
-  void rewind() {seekSet(0);}
-  bool rename(SdBaseFile* dirFile, const char* newPath);
-  bool rmdir();
-  // for backward compatibility
-  bool rmDir() {return rmdir();}
-  bool rmRfStar();
-  /** Set the files position to current position + \a pos. See seekSet().
-   * \param[in] offset The new position in bytes from the current position.
-   * \return true for success or false for failure.
-   */
-  bool seekCur(int32_t offset) {
-    return seekSet(curPosition_ + offset);
-  }
-  /** Set the files position to end-of-file + \a offset. See seekSet().
-   * \param[in] offset The new position in bytes from end-of-file.
-   * \return true for success or false for failure.
-   */
-  bool seekEnd(int32_t offset = 0) {return seekSet(fileSize_ + offset);}
-  bool seekSet(uint32_t pos);
-  bool sync();
-  bool timestamp(SdBaseFile* file);
-  bool timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day,
-                 uint8_t hour, uint8_t minute, uint8_t second);
-  /** Type of file.  You should use isFile() or isDir() instead of type()
-   * if possible.
-   *
-   * \return The file or directory type.
-   */
-  uint8_t type() const {return type_;}
-  bool truncate(uint32_t size);
-  /** \return SdVolume that contains this file. */
-  SdVolume* volume() const {return vol_;}
-  int16_t write(const void* buf, uint16_t nbyte);
-  //------------------------------------------------------------------------------
- private:
-  // allow SdFat to set cwd_
-  friend class SdFat;
-  // global pointer to cwd dir
-  static SdBaseFile* cwd_;
-  // data time callback function
-  static void (*dateTime_)(uint16_t* date, uint16_t* time);
-  // bits defined in flags_
-  // should be 0x0F
-  static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC);
-  // sync of directory entry required
-  static uint8_t const F_FILE_DIR_DIRTY = 0x80;
-
-  // private data
-  uint8_t   flags_;         // See above for definition of flags_ bits
-  uint8_t   fstate_;        // error and eof indicator
-  uint8_t   type_;          // type of file see above for values
-  uint32_t  curCluster_;    // cluster for current file position
-  uint32_t  curPosition_;   // current file position in bytes from beginning
-  uint32_t  dirBlock_;      // block for this files directory entry
-  uint8_t   dirIndex_;      // index of directory entry in dirBlock
-  uint32_t  fileSize_;      // file size in bytes
-  uint32_t  firstCluster_;  // first cluster of file
-  SdVolume* vol_;           // volume where file is located
-
-  /** experimental don't use */
-  bool openParent(SdBaseFile* dir);
-  // private functions
-  bool addCluster();
-  bool addDirCluster();
-  dir_t* cacheDirEntry(uint8_t action);
-  int8_t lsPrintNext(uint8_t flags, uint8_t indent);
-  static bool make83Name(const char* str, uint8_t* name, const char** ptr);
-  bool mkdir(SdBaseFile* parent, const uint8_t dname[11]);
-  bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
-  bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
-  dir_t* readDirCache();
-  //------------------------------------------------------------------------------
-  // to be deleted
-  static void printDirName(const dir_t& dir,
-                           uint8_t width, bool printSlash);
-  //------------------------------------------------------------------------------
-  // Deprecated functions  - suppress cpplint warnings with NOLINT comment
-#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
- public:
-  /** \deprecated Use:
-   * bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
-   * \param[out] bgnBlock the first block address for the file.
-   * \param[out] endBlock the last  block address for the file.
-   * \return true for success or false for failure.
-   */
-  bool contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) {  // NOLINT
-    return contiguousRange(&bgnBlock, &endBlock);
-  }
-  /** \deprecated Use:
-    * bool createContiguous(SdBaseFile* dirFile,
-    *   const char* path, uint32_t size)
-    * \param[in] dirFile The directory where the file will be created.
-    * \param[in] path A path with a valid DOS 8.3 file name.
-    * \param[in] size The desired file size.
-    * \return true for success or false for failure.
-    */
-  bool createContiguous(SdBaseFile& dirFile,  // NOLINT
-                        const char* path, uint32_t size) {
-    return createContiguous(&dirFile, path, size);
-  }
-  /** \deprecated Use:
-   * static void dateTimeCallback(
-   *   void (*dateTime)(uint16_t* date, uint16_t* time));
-   * \param[in] dateTime The user's call back function.
-   */
-  static void dateTimeCallback(
-    void (*dateTime)(uint16_t &date, uint16_t &time)) {  // NOLINT
-    oldDateTime_ = dateTime;
-    dateTime_ = dateTime ? oldToNew : 0;
-  }
-  /** \deprecated Use: bool dirEntry(dir_t* dir);
-   * \param[out] dir Location for return of the file's directory entry.
-   * \return true for success or false for failure.
-   */
-  bool dirEntry(dir_t& dir) {return dirEntry(&dir);}  // NOLINT
-  /** \deprecated Use:
-   * bool mkdir(SdBaseFile* dir, const char* path);
-   * \param[in] dir An open SdFat instance for the directory that will contain
-   * the new directory.
-   * \param[in] path A path with a valid 8.3 DOS name for the new directory.
-   * \return true for success or false for failure.
-   */
-  bool mkdir(SdBaseFile& dir, const char* path) {  // NOLINT
-    return mkdir(&dir, path);
-  }
-  /** \deprecated Use:
-   * bool open(SdBaseFile* dirFile, const char* path, uint8_t oflag);
-   * \param[in] dirFile An open SdFat instance for the directory containing the
-   * file to be opened.
-   * \param[in] path A path with a valid 8.3 DOS name for the file.
-   * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
-   * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, // NOLINT
-            const char* path, uint8_t oflag) {
-    return open(&dirFile, path, oflag);
-  }
-  /** \deprecated  Do not use in new apps
-   * \param[in] dirFile An open SdFat instance for the directory containing the
-   * file to be opened.
-   * \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, const char* path) {  // NOLINT
-    return open(dirFile, path, O_RDWR);
-  }
-  /** \deprecated Use:
-   * bool open(SdBaseFile* dirFile, uint16_t index, uint8_t oflag);
-   * \param[in] dirFile An open SdFat instance for the directory.
-   * \param[in] index The \a index of the directory entry for the file to be
-   * opened.  The value for \a index is (directory file position)/32.
-   * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
-   * OR of flags O_READ, O_WRITE, O_TRUNC, and O_SYNC.
-   * \return true for success or false for failure.
-   */
-  bool open(SdBaseFile& dirFile, uint16_t index, uint8_t oflag) {  // NOLINT
-    return open(&dirFile, index, oflag);
-  }
-  /** \deprecated Use: bool openRoot(SdVolume* vol);
-   * \param[in] vol The FAT volume containing the root directory to be opened.
-   * \return true for success or false for failure.
-   */
-  bool openRoot(SdVolume& vol) {return openRoot(&vol);}  // NOLINT
-  /** \deprecated Use: int8_t readDir(dir_t* dir);
-   * \param[out] dir The dir_t struct that will receive the data.
-   * \return bytes read for success zero for eof or -1 for failure.
-   */
-  int8_t readDir(dir_t& dir, char* longFilename) {return readDir(&dir, longFilename);}  // NOLINT
-  /** \deprecated Use:
-   * static uint8_t remove(SdBaseFile* dirFile, const char* path);
-   * \param[in] dirFile The directory that contains the file.
-   * \param[in] path The name of the file to be removed.
-   * \return true for success or false for failure.
-   */
-  static bool remove(SdBaseFile& dirFile, const char* path) {  // NOLINT
-    return remove(&dirFile, path);
-  }
-  //------------------------------------------------------------------------------
-  // rest are private
- private:
-  static void (*oldDateTime_)(uint16_t &date, uint16_t &time);  // NOLINT
-  static void oldToNew(uint16_t* date, uint16_t* time) {
-    uint16_t d;
-    uint16_t t;
-    oldDateTime_(d, t);
-    *date = d;
-    *time = t;
-  }
-#endif  // ALLOW_DEPRECATED_FUNCTIONS
-};
-
-#endif  // SdBaseFile_h
-#endif

Marlin/SdFatConfig.h

@@ -1,134 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-/**
- * \file
- * \brief configuration definitions
- */
-#include "Marlin.h"
-#if ENABLED(SDSUPPORT)
-
-#ifndef SdFatConfig_h
-  #define SdFatConfig_h
-  #include <stdint.h>
-  //------------------------------------------------------------------------------
-  /**
-  * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
-  *
-  * Using multiple cards costs 400 - 500  bytes of flash.
-  *
-  * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
-  */
-  #define USE_MULTIPLE_CARDS 0
-  //------------------------------------------------------------------------------
-  /**
-  * Call flush for endl if ENDL_CALLS_FLUSH is nonzero
-  *
-  * The standard for iostreams is to call flush.  This is very costly for
-  * SdFat.  Each call to flush causes 2048 bytes of I/O to the SD.
-  *
-  * SdFat has a single 512 byte buffer for SD I/O so it must write the current
-  * data block to the SD, read the directory block from the SD, update the
-  * directory entry, write the directory block to the SD and read the data
-  * block back into the buffer.
-  *
-  * The SD flash memory controller is not designed for this many rewrites
-  * so performance may be reduced by more than a factor of 100.
-  *
-  * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force
-  * all data to be written to the SD.
-  */
-  #define ENDL_CALLS_FLUSH 0
-  //------------------------------------------------------------------------------
-  /**
-  * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
-  */
-  #define ALLOW_DEPRECATED_FUNCTIONS 1
-  //------------------------------------------------------------------------------
-  /**
-  * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
-  * FAT12 has not been well tested.
-  */
-  #define FAT12_SUPPORT 0
-  //------------------------------------------------------------------------------
-  /**
-  * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
-  * or 6 (F_CPU/128).
-  */
-  #define SPI_SD_INIT_RATE 5
-  //------------------------------------------------------------------------------
-  /**
-  * Set the SS pin high for hardware SPI.  If SS is chip select for another SPI
-  * device this will disable that device during the SD init phase.
-  */
-  #define SET_SPI_SS_HIGH 1
-  //------------------------------------------------------------------------------
-  /**
-  * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
-  * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
-  *
-  * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
-  * on Mega Arduinos.  Software SPI works well with GPS Shield V1.1
-  * but many SD cards will fail with GPS Shield V1.0.
-  */
-  #define MEGA_SOFT_SPI 0
-  //------------------------------------------------------------------------------
-  /**
-  * Set USE_SOFTWARE_SPI nonzero to always use software SPI.
-  */
-  #define USE_SOFTWARE_SPI 0
-  // define software SPI pins so Mega can use unmodified 168/328 shields
-  /** Software SPI chip select pin for the SD */
-  #define SOFT_SPI_CS_PIN 10
-  /** Software SPI Master Out Slave In pin */
-  #define SOFT_SPI_MOSI_PIN 11
-  /** Software SPI Master In Slave Out pin */
-  #define SOFT_SPI_MISO_PIN 12
-  /** Software SPI Clock pin */
-  #define SOFT_SPI_SCK_PIN 13
-  //------------------------------------------------------------------------------
-  /**
-  * The __cxa_pure_virtual function is an error handler that is invoked when
-  * a pure virtual function is called.
-  */
-  #define USE_CXA_PURE_VIRTUAL 1
-
-  /** Number of UTF-16 characters per entry */
-  #define FILENAME_LENGTH 13
-
-  /**
-  * Defines for long (vfat) filenames
-  */
-  /** Number of VFAT entries used. Every entry has 13 UTF-16 characters */
-  #define MAX_VFAT_ENTRIES (2)
-  /** Total size of the buffer used to store the long filenames */
-  #define LONG_FILENAME_LENGTH (FILENAME_LENGTH*MAX_VFAT_ENTRIES+1)
-#endif  // SdFatConfig_h
-
-
-#endif

Marlin/SdFatStructs.h

@@ -1,655 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-#include "Marlin.h"
-#if ENABLED(SDSUPPORT)
-
-#ifndef SdFatStructs_h
-#define SdFatStructs_h
-
-#define PACKED __attribute__((__packed__))
-/**
- * \file
- * \brief FAT file structures
- */
-/**
- * mostly from Microsoft document fatgen103.doc
- * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
- */
-//------------------------------------------------------------------------------
-/** Value for byte 510 of boot block or MBR */
-uint8_t const BOOTSIG0 = 0x55;
-/** Value for byte 511 of boot block or MBR */
-uint8_t const BOOTSIG1 = 0xAA;
-/** Value for bootSignature field int FAT/FAT32 boot sector */
-uint8_t const EXTENDED_BOOT_SIG = 0x29;
-//------------------------------------------------------------------------------
-/**
- * \struct partitionTable
- * \brief MBR partition table entry
- *
- * A partition table entry for a MBR formatted storage device.
- * The MBR partition table has four entries.
- */
-struct partitionTable {
-          /**
-           * Boot Indicator . Indicates whether the volume is the active
-           * partition.  Legal values include: 0x00. Do not use for booting.
-           * 0x80 Active partition.
-           */
-  uint8_t  boot;
-          /**
-           * Head part of Cylinder-head-sector address of the first block in
-           * the partition. Legal values are 0-255. Only used in old PC BIOS.
-           */
-  uint8_t  beginHead;
-          /**
-           * Sector part of Cylinder-head-sector address of the first block in
-           * the partition. Legal values are 1-63. Only used in old PC BIOS.
-           */
-  unsigned beginSector : 6;
-           /** High bits cylinder for first block in partition. */
-  unsigned beginCylinderHigh : 2;
-          /**
-           * Combine beginCylinderLow with beginCylinderHigh. Legal values
-           * are 0-1023.  Only used in old PC BIOS.
-           */
-  uint8_t  beginCylinderLow;
-          /**
-           * Partition type. See defines that begin with PART_TYPE_ for
-           * some Microsoft partition types.
-           */
-  uint8_t  type;
-          /**
-           * head part of cylinder-head-sector address of the last sector in the
-           * partition.  Legal values are 0-255. Only used in old PC BIOS.
-           */
-  uint8_t  endHead;
-          /**
-           * Sector part of cylinder-head-sector address of the last sector in
-           * the partition.  Legal values are 1-63. Only used in old PC BIOS.
-           */
-  unsigned endSector : 6;
-           /** High bits of end cylinder */
-  unsigned endCylinderHigh : 2;
-          /**
-           * Combine endCylinderLow with endCylinderHigh. Legal values
-           * are 0-1023.  Only used in old PC BIOS.
-           */
-  uint8_t  endCylinderLow;
-           /** Logical block address of the first block in the partition. */
-  uint32_t firstSector;
-           /** Length of the partition, in blocks. */
-  uint32_t totalSectors;
-} PACKED;
-/** Type name for partitionTable */
-typedef struct partitionTable part_t;
-//------------------------------------------------------------------------------
-/**
- * \struct masterBootRecord
- *
- * \brief Master Boot Record
- *
- * The first block of a storage device that is formatted with a MBR.
- */
-struct masterBootRecord {
-           /** Code Area for master boot program. */
-  uint8_t  codeArea[440];
-           /** Optional Windows NT disk signature. May contain boot code. */
-  uint32_t diskSignature;
-           /** Usually zero but may be more boot code. */
-  uint16_t usuallyZero;
-           /** Partition tables. */
-  part_t   part[4];
-           /** First MBR signature byte. Must be 0x55 */
-  uint8_t  mbrSig0;
-           /** Second MBR signature byte. Must be 0xAA */
-  uint8_t  mbrSig1;
-} PACKED;
-/** Type name for masterBootRecord */
-typedef struct masterBootRecord mbr_t;
-//------------------------------------------------------------------------------
-/**
- * \struct fat_boot
- *
- * \brief Boot sector for a FAT12/FAT16 volume.
- *
- */
-struct fat_boot {
-         /**
-          * The first three bytes of the boot sector must be valid,
-          * executable x 86-based CPU instructions. This includes a
-          * jump instruction that skips the next nonexecutable bytes.
-          */
-  uint8_t jump[3];
-         /**
-          * This is typically a string of characters that identifies
-          * the operating system that formatted the volume.
-          */
-  char    oemId[8];
-          /**
-           * The size of a hardware sector. Valid decimal values for this
-           * field are 512, 1024, 2048, and 4096. For most disks used in
-           * the United States, the value of this field is 512.
-           */
-  uint16_t bytesPerSector;
-          /**
-           * Number of sectors per allocation unit. This value must be a
-           * power of 2 that is greater than 0. The legal values are
-           * 1, 2, 4, 8, 16, 32, 64, and 128.  128 should be avoided.
-           */
-  uint8_t  sectorsPerCluster;
-          /**
-           * The number of sectors preceding the start of the first FAT,
-           * including the boot sector. The value of this field is always 1.
-           */
-  uint16_t reservedSectorCount;
-          /**
-           * The number of copies of the FAT on the volume.
-           * The value of this field is always 2.
-           */
-  uint8_t  fatCount;
-          /**
-           * For FAT12 and FAT16 volumes, this field contains the count of
-           * 32-byte directory entries in the root directory. For FAT32 volumes,
-           * this field must be set to 0. For FAT12 and FAT16 volumes, this
-           * value should always specify a count that when multiplied by 32
-           * results in a multiple of bytesPerSector.  FAT16 volumes should
-           * use the value 512.
-           */
-  uint16_t rootDirEntryCount;
-          /**
-           * This field is the old 16-bit total count of sectors on the volume.
-           * This count includes the count of all sectors in all four regions
-           * of the volume. This field can be 0; if it is 0, then totalSectors32
-           * must be nonzero.  For FAT32 volumes, this field must be 0. For
-           * FAT12 and FAT16 volumes, this field contains the sector count, and
-           * totalSectors32 is 0 if the total sector count fits
-           * (is less than 0x10000).
-           */
-  uint16_t totalSectors16;
-          /**
-           * This dates back to the old MS-DOS 1.x media determination and is
-           * no longer usually used for anything.  0xF8 is the standard value
-           * for fixed (nonremovable) media. For removable media, 0xF0 is
-           * frequently used. Legal values are 0xF0 or 0xF8-0xFF.
-           */
-  uint8_t  mediaType;
-          /**
-           * Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
-           * On FAT32 volumes this field must be 0, and sectorsPerFat32
-           * contains the FAT size count.
-           */
-  uint16_t sectorsPerFat16;
-           /** Sectors per track for interrupt 0x13. Not used otherwise. */
-  uint16_t sectorsPerTrack;
-           /** Number of heads for interrupt 0x13.  Not used otherwise. */
-  uint16_t headCount;
-          /**
-           * Count of hidden sectors preceding the partition that contains this
-           * FAT volume. This field is generally only relevant for media
-           * visible on interrupt 0x13.
-           */
-  uint32_t hidddenSectors;
-          /**
-           * This field is the new 32-bit total count of sectors on the volume.
-           * This count includes the count of all sectors in all four regions
-           * of the volume.  This field can be 0; if it is 0, then
-           * totalSectors16 must be nonzero.
-           */
-  uint32_t totalSectors32;
-           /**
-            * Related to the BIOS physical drive number. Floppy drives are
-            * identified as 0x00 and physical hard disks are identified as
-            * 0x80, regardless of the number of physical disk drives.
-            * Typically, this value is set prior to issuing an INT 13h BIOS
-            * call to specify the device to access. The value is only
-            * relevant if the device is a boot device.
-            */
-  uint8_t  driveNumber;
-           /** used by Windows NT - should be zero for FAT */
-  uint8_t  reserved1;
-           /** 0x29 if next three fields are valid */
-  uint8_t  bootSignature;
-           /**
-            * A random serial number created when formatting a disk,
-            * which helps to distinguish between disks.
-            * Usually generated by combining date and time.
-            */
-  uint32_t volumeSerialNumber;
-           /**
-            * A field once used to store the volume label. The volume label
-            * is now stored as a special file in the root directory.
-            */
-  char     volumeLabel[11];
-           /**
-            * A field with a value of either FAT, FAT12 or FAT16,
-            * depending on the disk format.
-            */
-  char     fileSystemType[8];
-           /** X86 boot code */
-  uint8_t  bootCode[448];
-           /** must be 0x55 */
-  uint8_t  bootSectorSig0;
-           /** must be 0xAA */
-  uint8_t  bootSectorSig1;
-} PACKED;
-/** Type name for FAT Boot Sector */
-typedef struct fat_boot fat_boot_t;
-//------------------------------------------------------------------------------
-/**
- * \struct fat32_boot
- *
- * \brief Boot sector for a FAT32 volume.
- *
- */
-struct fat32_boot {
-         /**
-          * The first three bytes of the boot sector must be valid,
-          * executable x 86-based CPU instructions. This includes a
-          * jump instruction that skips the next nonexecutable bytes.
-          */
-  uint8_t jump[3];
-         /**
-          * This is typically a string of characters that identifies
-          * the operating system that formatted the volume.
-          */
-  char    oemId[8];
-          /**
-           * The size of a hardware sector. Valid decimal values for this
-           * field are 512, 1024, 2048, and 4096. For most disks used in
-           * the United States, the value of this field is 512.
-           */
-  uint16_t bytesPerSector;
-          /**
-           * Number of sectors per allocation unit. This value must be a
-           * power of 2 that is greater than 0. The legal values are
-           * 1, 2, 4, 8, 16, 32, 64, and 128.  128 should be avoided.
-           */
-  uint8_t  sectorsPerCluster;
-          /**
-           * The number of sectors preceding the start of the first FAT,
-           * including the boot sector. Must not be zero
-           */
-  uint16_t reservedSectorCount;
-          /**
-           * The number of copies of the FAT on the volume.
-           * The value of this field is always 2.
-           */
-  uint8_t  fatCount;
-          /**
-           * FAT12/FAT16 only. For FAT32 volumes, this field must be set to 0.
-           */
-  uint16_t rootDirEntryCount;
-          /**
-           * For FAT32 volumes, this field must be 0.
-           */
-  uint16_t totalSectors16;
-          /**
-           * This dates back to the old MS-DOS 1.x media determination and is
-           * no longer usually used for anything.  0xF8 is the standard value
-           * for fixed (nonremovable) media. For removable media, 0xF0 is
-           * frequently used. Legal values are 0xF0 or 0xF8-0xFF.
-           */
-  uint8_t  mediaType;
-          /**
-           * On FAT32 volumes this field must be 0, and sectorsPerFat32
-           * contains the FAT size count.
-           */
-  uint16_t sectorsPerFat16;
-           /** Sectors per track for interrupt 0x13. Not used otherwise. */
-  uint16_t sectorsPerTrack;
-           /** Number of heads for interrupt 0x13.  Not used otherwise. */
-  uint16_t headCount;
-          /**
-           * Count of hidden sectors preceding the partition that contains this
-           * FAT volume. This field is generally only relevant for media
-           * visible on interrupt 0x13.
-           */
-  uint32_t hidddenSectors;
-          /**
-           * Contains the total number of sectors in the FAT32 volume.
-           */
-  uint32_t totalSectors32;
-         /**
-           * Count of sectors occupied by one FAT on FAT32 volumes.
-           */
-  uint32_t sectorsPerFat32;
-          /**
-           * This field is only defined for FAT32 media and does not exist on
-           * FAT12 and FAT16 media.
-           * Bits 0-3 -- Zero-based number of active FAT.
-           *             Only valid if mirroring is disabled.
-           * Bits 4-6 -- Reserved.
-           * Bit 7  -- 0 means the FAT is mirrored at runtime into all FATs.
-           *        -- 1 means only one FAT is active; it is the one referenced
-           *             in bits 0-3.
-           * Bits 8-15  -- Reserved.
-           */
-  uint16_t fat32Flags;
-          /**
-           * FAT32 version. High byte is major revision number.
-           * Low byte is minor revision number. Only 0.0 define.
-           */
-  uint16_t fat32Version;
-          /**
-           * Cluster number of the first cluster of the root directory for FAT32.
-           * This usually 2 but not required to be 2.
-           */
-  uint32_t fat32RootCluster;
-          /**
-           * Sector number of FSINFO structure in the reserved area of the
-           * FAT32 volume. Usually 1.
-           */
-  uint16_t fat32FSInfo;
-          /**
-           * If nonzero, indicates the sector number in the reserved area
-           * of the volume of a copy of the boot record. Usually 6.
-           * No value other than 6 is recommended.
-           */
-  uint16_t fat32BackBootBlock;
-          /**
-           * Reserved for future expansion. Code that formats FAT32 volumes
-           * should always set all of the bytes of this field to 0.
-           */
-  uint8_t  fat32Reserved[12];
-           /**
-            * Related to the BIOS physical drive number. Floppy drives are
-            * identified as 0x00 and physical hard disks are identified as
-            * 0x80, regardless of the number of physical disk drives.
-            * Typically, this value is set prior to issuing an INT 13h BIOS
-            * call to specify the device to access. The value is only
-            * relevant if the device is a boot device.
-            */
-  uint8_t  driveNumber;
-           /** used by Windows NT - should be zero for FAT */
-  uint8_t  reserved1;
-           /** 0x29 if next three fields are valid */
-  uint8_t  bootSignature;
-           /**
-            * A random serial number created when formatting a disk,
-            * which helps to distinguish between disks.
-            * Usually generated by combining date and time.
-            */
-  uint32_t volumeSerialNumber;
-           /**
-            * A field once used to store the volume label. The volume label
-            * is now stored as a special file in the root directory.
-            */
-  char     volumeLabel[11];
-           /**
-            * A text field with a value of FAT32.
-            */
-  char     fileSystemType[8];
-           /** X86 boot code */
-  uint8_t  bootCode[420];
-           /** must be 0x55 */
-  uint8_t  bootSectorSig0;
-           /** must be 0xAA */
-  uint8_t  bootSectorSig1;
-} PACKED;
-/** Type name for FAT32 Boot Sector */
-typedef struct fat32_boot fat32_boot_t;
-//------------------------------------------------------------------------------
-/** Lead signature for a FSINFO sector */
-uint32_t const FSINFO_LEAD_SIG = 0x41615252;
-/** Struct signature for a FSINFO sector */
-uint32_t const FSINFO_STRUCT_SIG = 0x61417272;
-/**
- * \struct fat32_fsinfo
- *
- * \brief FSINFO sector for a FAT32 volume.
- *
- */
-struct fat32_fsinfo {
-           /** must be 0x52, 0x52, 0x61, 0x41 */
-  uint32_t  leadSignature;
-           /** must be zero */
-  uint8_t  reserved1[480];
-           /** must be 0x72, 0x72, 0x41, 0x61 */
-  uint32_t  structSignature;
-          /**
-           * Contains the last known free cluster count on the volume.
-           * If the value is 0xFFFFFFFF, then the free count is unknown
-           * and must be computed. Any other value can be used, but is
-           * not necessarily correct. It should be range checked at least
-           * to make sure it is <= volume cluster count.
-           */
-  uint32_t freeCount;
-          /**
-           * This is a hint for the FAT driver. It indicates the cluster
-           * number at which the driver should start looking for free clusters.
-           * If the value is 0xFFFFFFFF, then there is no hint and the driver
-           * should start looking at cluster 2.
-           */
-  uint32_t nextFree;
-           /** must be zero */
-  uint8_t  reserved2[12];
-           /** must be 0x00, 0x00, 0x55, 0xAA */
-  uint8_t  tailSignature[4];
-} PACKED;
-/** Type name for FAT32 FSINFO Sector */
-typedef struct fat32_fsinfo fat32_fsinfo_t;
-//------------------------------------------------------------------------------
-// End Of Chain values for FAT entries
-/** FAT12 end of chain value used by Microsoft. */
-uint16_t const FAT12EOC = 0xFFF;
-/** Minimum value for FAT12 EOC.  Use to test for EOC. */
-uint16_t const FAT12EOC_MIN = 0xFF8;
-/** FAT16 end of chain value used by Microsoft. */
-uint16_t const FAT16EOC = 0xFFFF;
-/** Minimum value for FAT16 EOC.  Use to test for EOC. */
-uint16_t const FAT16EOC_MIN = 0xFFF8;
-/** FAT32 end of chain value used by Microsoft. */
-uint32_t const FAT32EOC = 0x0FFFFFFF;
-/** Minimum value for FAT32 EOC.  Use to test for EOC. */
-uint32_t const FAT32EOC_MIN = 0x0FFFFFF8;
-/** Mask a for FAT32 entry. Entries are 28 bits. */
-uint32_t const FAT32MASK = 0x0FFFFFFF;
-//------------------------------------------------------------------------------
-/**
- * \struct directoryEntry
- * \brief FAT short directory entry
- *
- * Short means short 8.3 name, not the entry size.
- *
- * Date Format. A FAT directory entry date stamp is a 16-bit field that is
- * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
- * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
- * 16-bit word):
- *
- * Bits 9-15: Count of years from 1980, valid value range 0-127
- * inclusive (1980-2107).
- *
- * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
- *
- * Bits 0-4: Day of month, valid value range 1-31 inclusive.
- *
- * Time Format. A FAT directory entry time stamp is a 16-bit field that has
- * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
- * 16-bit word, bit 15 is the MSB of the 16-bit word).
- *
- * Bits 11-15: Hours, valid value range 0-23 inclusive.
- *
- * Bits 5-10: Minutes, valid value range 0-59 inclusive.
- *
- * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
- *
- * The valid time range is from Midnight 00:00:00 to 23:59:58.
- */
-struct directoryEntry {
-           /** Short 8.3 name.
-            *
-            * The first eight bytes contain the file name with blank fill.
-            * The last three bytes contain the file extension with blank fill.
-            */
-  uint8_t  name[11];
-          /** Entry attributes.
-           *
-           * The upper two bits of the attribute byte are reserved and should
-           * always be set to 0 when a file is created and never modified or
-           * looked at after that.  See defines that begin with DIR_ATT_.
-           */
-  uint8_t  attributes;
-          /**
-           * Reserved for use by Windows NT. Set value to 0 when a file is
-           * created and never modify or look at it after that.
-           */
-  uint8_t  reservedNT;
-          /**
-           * The granularity of the seconds part of creationTime is 2 seconds
-           * so this field is a count of tenths of a second and it's valid
-           * value range is 0-199 inclusive. (WHG note - seems to be hundredths)
-           */
-  uint8_t  creationTimeTenths;
-           /** Time file was created. */
-  uint16_t creationTime;
-           /** Date file was created. */
-  uint16_t creationDate;
-          /**
-           * Last access date. Note that there is no last access time, only
-           * a date.  This is the date of last read or write. In the case of
-           * a write, this should be set to the same date as lastWriteDate.
-           */
-  uint16_t lastAccessDate;
-          /**
-           * High word of this entry's first cluster number (always 0 for a
-           * FAT12 or FAT16 volume).
-           */
-  uint16_t firstClusterHigh;
-           /** Time of last write. File creation is considered a write. */
-  uint16_t lastWriteTime;
-           /** Date of last write. File creation is considered a write. */
-  uint16_t lastWriteDate;
-           /** Low word of this entry's first cluster number. */
-  uint16_t firstClusterLow;
-           /** 32-bit unsigned holding this file's size in bytes. */
-  uint32_t fileSize;
-} PACKED;
-/**
- * \struct directoryVFATEntry
- * \brief VFAT long filename directory entry
- *
- * directoryVFATEntries are found in the same list as normal directoryEntry.
- * But have the attribute field set to DIR_ATT_LONG_NAME.
- *
- * Long filenames are saved in multiple directoryVFATEntries.
- * Each entry containing 13 UTF-16 characters.
- */
-struct directoryVFATEntry {
-  /**
-   * Sequence number. Consists of 2 parts:
-   *  bit 6:   indicates first long filename block for the next file
-   *  bit 0-4: the position of this long filename block (first block is 1)
-   */
-  uint8_t  sequenceNumber;
-  /** First set of UTF-16 characters */
-  uint16_t name1[5];//UTF-16
-  /** attributes (at the same location as in directoryEntry), always 0x0F */
-  uint8_t  attributes;
-  /** Reserved for use by Windows NT. Always 0. */
-  uint8_t  reservedNT;
-  /** Checksum of the short 8.3 filename, can be used to checked if the file system as modified by a not-long-filename aware implementation. */
-  uint8_t  checksum;
-  /** Second set of UTF-16 characters */
-  uint16_t name2[6];//UTF-16
-  /** firstClusterLow is always zero for longFilenames */
-  uint16_t firstClusterLow;
-  /** Third set of UTF-16 characters */
-  uint16_t name3[2];//UTF-16
-} PACKED;
-//------------------------------------------------------------------------------
-// Definitions for directory entries
-//
-/** Type name for directoryEntry */
-typedef struct directoryEntry dir_t;
-/** Type name for directoryVFATEntry */
-typedef struct directoryVFATEntry vfat_t;
-/** escape for name[0] = 0xE5 */
-uint8_t const DIR_NAME_0xE5 = 0x05;
-/** name[0] value for entry that is free after being "deleted" */
-uint8_t const DIR_NAME_DELETED = 0xE5;
-/** name[0] value for entry that is free and no allocated entries follow */
-uint8_t const DIR_NAME_FREE = 0x00;
-/** file is read-only */
-uint8_t const DIR_ATT_READ_ONLY = 0x01;
-/** File should hidden in directory listings */
-uint8_t const DIR_ATT_HIDDEN = 0x02;
-/** Entry is for a system file */
-uint8_t const DIR_ATT_SYSTEM = 0x04;
-/** Directory entry contains the volume label */
-uint8_t const DIR_ATT_VOLUME_ID = 0x08;
-/** Entry is for a directory */
-uint8_t const DIR_ATT_DIRECTORY = 0x10;
-/** Old DOS archive bit for backup support */
-uint8_t const DIR_ATT_ARCHIVE = 0x20;
-/** Test value for long name entry.  Test is
-  (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
-uint8_t const DIR_ATT_LONG_NAME = 0x0F;
-/** Test mask for long name entry */
-uint8_t const DIR_ATT_LONG_NAME_MASK = 0x3F;
-/** defined attribute bits */
-uint8_t const DIR_ATT_DEFINED_BITS = 0x3F;
-/** Directory entry is part of a long name
- * \param[in] dir Pointer to a directory entry.
- *
- * \return true if the entry is for part of a long name else false.
- */
-static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
-  return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
-}
-/** Mask for file/subdirectory tests */
-uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
-/** Directory entry is for a file
- * \param[in] dir Pointer to a directory entry.
- *
- * \return true if the entry is for a normal file else false.
- */
-static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
-  return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
-}
-/** Directory entry is for a subdirectory
- * \param[in] dir Pointer to a directory entry.
- *
- * \return true if the entry is for a subdirectory else false.
- */
-static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
-  return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
-}
-/** Directory entry is for a file or subdirectory
- * \param[in] dir Pointer to a directory entry.
- *
- * \return true if the entry is for a normal file or subdirectory else false.
- */
-static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
-  return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
-}
-#endif  // SdFatStructs_h
-
-
-#endif

Marlin/SdFatUtil.cpp

@@ -1,91 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino SdFat Library
- * Copyright (C) 2008 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-#include "Marlin.h"
-
-#if ENABLED(SDSUPPORT)
-#include "SdFatUtil.h"
-
-//------------------------------------------------------------------------------
-/** Amount of free RAM
- * \return The number of free bytes.
- */
-#ifdef __arm__
-extern "C" char* sbrk(int incr);
-int SdFatUtil::FreeRam() {
-  char top;
-  return &top - reinterpret_cast<char*>(sbrk(0));
-}
-#else  // __arm__
-extern char* __brkval;
-extern char __bss_end;
-/** Amount of free RAM
- * \return The number of free bytes.
- */
-int SdFatUtil::FreeRam() {
-  char top;
-  return __brkval ? &top - __brkval : &top - &__bss_end;
-}
-#endif  // __arm
-
-//------------------------------------------------------------------------------
-/** %Print a string in flash memory.
- *
- * \param[in] pr Print object for output.
- * \param[in] str Pointer to string stored in flash memory.
- */
-void SdFatUtil::print_P(PGM_P str) {
-  for (uint8_t c; (c = pgm_read_byte(str)); str++) MYSERIAL.write(c);
-}
-//------------------------------------------------------------------------------
-/** %Print a string in flash memory followed by a CR/LF.
- *
- * \param[in] pr Print object for output.
- * \param[in] str Pointer to string stored in flash memory.
- */
-void SdFatUtil::println_P(PGM_P str) {
-  print_P(str);
-  MYSERIAL.println();
-}
-//------------------------------------------------------------------------------
-/** %Print a string in flash memory to Serial.
- *
- * \param[in] str Pointer to string stored in flash memory.
- */
-void SdFatUtil::SerialPrint_P(PGM_P str) {
-  print_P(str);
-}
-//------------------------------------------------------------------------------
-/** %Print a string in flash memory to Serial followed by a CR/LF.
- *
- * \param[in] str Pointer to string stored in flash memory.
- */
-void SdFatUtil::SerialPrintln_P(PGM_P str) {
-  println_P(str);
-}
-#endif

Marlin/SdVolume.h

@@ -1,227 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- */
-#include "Marlin.h"
-#if ENABLED(SDSUPPORT)
-#ifndef SdVolume_h
-#define SdVolume_h
-/**
- * \file
- * \brief SdVolume class
- */
-#include "SdFatConfig.h"
-#include "Sd2Card.h"
-#include "SdFatStructs.h"
-
-//==============================================================================
-// SdVolume class
-/**
- * \brief Cache for an SD data block
- */
-union cache_t {
-           /** Used to access cached file data blocks. */
-  uint8_t  data[512];
-           /** Used to access cached FAT16 entries. */
-  uint16_t fat16[256];
-           /** Used to access cached FAT32 entries. */
-  uint32_t fat32[128];
-           /** Used to access cached directory entries. */
-  dir_t    dir[16];
-           /** Used to access a cached Master Boot Record. */
-  mbr_t    mbr;
-           /** Used to access to a cached FAT boot sector. */
-  fat_boot_t fbs;
-           /** Used to access to a cached FAT32 boot sector. */
-  fat32_boot_t fbs32;
-           /** Used to access to a cached FAT32 FSINFO sector. */
-  fat32_fsinfo_t fsinfo;
-};
-//------------------------------------------------------------------------------
-/**
- * \class SdVolume
- * \brief Access FAT16 and FAT32 volumes on SD and SDHC cards.
- */
-class SdVolume {
- public:
-  /** Create an instance of SdVolume */
-  SdVolume() : fatType_(0) {}
-  /** Clear the cache and returns a pointer to the cache.  Used by the WaveRP
-   * recorder to do raw write to the SD card.  Not for normal apps.
-   * \return A pointer to the cache buffer or zero if an error occurs.
-   */
-  cache_t* cacheClear() {
-    if (!cacheFlush()) return 0;
-    cacheBlockNumber_ = 0xFFFFFFFF;
-    return &cacheBuffer_;
-  }
-  /** Initialize a FAT volume.  Try partition one first then try super
-   * floppy format.
-   *
-   * \param[in] dev The Sd2Card where the volume is located.
-   *
-   * \return The value one, true, is returned for success and
-   * the value zero, false, is returned for failure.  Reasons for
-   * failure include not finding a valid partition, not finding a valid
-   * FAT file system or an I/O error.
-   */
-  bool init(Sd2Card* dev) { return init(dev, 1) ? true : init(dev, 0);}
-  bool init(Sd2Card* dev, uint8_t part);
-
-  // inline functions that return volume info
-  /** \return The volume's cluster size in blocks. */
-  uint8_t blocksPerCluster() const {return blocksPerCluster_;}
-  /** \return The number of blocks in one FAT. */
-  uint32_t blocksPerFat()  const {return blocksPerFat_;}
-  /** \return The total number of clusters in the volume. */
-  uint32_t clusterCount() const {return clusterCount_;}
-  /** \return The shift count required to multiply by blocksPerCluster. */
-  uint8_t clusterSizeShift() const {return clusterSizeShift_;}
-  /** \return The logical block number for the start of file data. */
-  uint32_t dataStartBlock() const {return dataStartBlock_;}
-  /** \return The number of FAT structures on the volume. */
-  uint8_t fatCount() const {return fatCount_;}
-  /** \return The logical block number for the start of the first FAT. */
-  uint32_t fatStartBlock() const {return fatStartBlock_;}
-  /** \return The FAT type of the volume. Values are 12, 16 or 32. */
-  uint8_t fatType() const {return fatType_;}
-  int32_t freeClusterCount();
-  /** \return The number of entries in the root directory for FAT16 volumes. */
-  uint32_t rootDirEntryCount() const {return rootDirEntryCount_;}
-  /** \return The logical block number for the start of the root directory
-       on FAT16 volumes or the first cluster number on FAT32 volumes. */
-  uint32_t rootDirStart() const {return rootDirStart_;}
-  /** Sd2Card object for this volume
-   * \return pointer to Sd2Card object.
-   */
-  Sd2Card* sdCard() {return sdCard_;}
-  /** Debug access to FAT table
-   *
-   * \param[in] n cluster number.
-   * \param[out] v value of entry
-   * \return true for success or false for failure
-   */
-  bool dbgFat(uint32_t n, uint32_t* v) {return fatGet(n, v);}
-  //------------------------------------------------------------------------------
- private:
-  // Allow SdBaseFile access to SdVolume private data.
-  friend class SdBaseFile;
-
-  // value for dirty argument in cacheRawBlock to indicate read from cache
-  static bool const CACHE_FOR_READ = false;
-  // value for dirty argument in cacheRawBlock to indicate write to cache
-  static bool const CACHE_FOR_WRITE = true;
-
-#if USE_MULTIPLE_CARDS
-  cache_t cacheBuffer_;        // 512 byte cache for device blocks
-  uint32_t cacheBlockNumber_;  // Logical number of block in the cache
-  Sd2Card* sdCard_;            // Sd2Card object for cache
-  bool cacheDirty_;            // cacheFlush() will write block if true
-  uint32_t cacheMirrorBlock_;  // block number for mirror FAT
-#else  // USE_MULTIPLE_CARDS
-  static cache_t cacheBuffer_;        // 512 byte cache for device blocks
-  static uint32_t cacheBlockNumber_;  // Logical number of block in the cache
-  static Sd2Card* sdCard_;            // Sd2Card object for cache
-  static bool cacheDirty_;            // cacheFlush() will write block if true
-  static uint32_t cacheMirrorBlock_;  // block number for mirror FAT
-#endif  // USE_MULTIPLE_CARDS
-  uint32_t allocSearchStart_;   // start cluster for alloc search
-  uint8_t blocksPerCluster_;    // cluster size in blocks
-  uint32_t blocksPerFat_;       // FAT size in blocks
-  uint32_t clusterCount_;       // clusters in one FAT
-  uint8_t clusterSizeShift_;    // shift to convert cluster count to block count
-  uint32_t dataStartBlock_;     // first data block number
-  uint8_t fatCount_;            // number of FATs on volume
-  uint32_t fatStartBlock_;      // start block for first FAT
-  uint8_t fatType_;             // volume type (12, 16, OR 32)
-  uint16_t rootDirEntryCount_;  // number of entries in FAT16 root dir
-  uint32_t rootDirStart_;       // root start block for FAT16, cluster for FAT32
-  //----------------------------------------------------------------------------
-  bool allocContiguous(uint32_t count, uint32_t* curCluster);
-  uint8_t blockOfCluster(uint32_t position) const {
-    return (position >> 9) & (blocksPerCluster_ - 1);
-  }
-  uint32_t clusterStartBlock(uint32_t cluster) const {
-    return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);
-  }
-  uint32_t blockNumber(uint32_t cluster, uint32_t position) const {
-    return clusterStartBlock(cluster) + blockOfCluster(position);
-  }
-  cache_t* cache() {return &cacheBuffer_;}
-  uint32_t cacheBlockNumber() {return cacheBlockNumber_;}
-#if USE_MULTIPLE_CARDS
-  bool cacheFlush();
-  bool cacheRawBlock(uint32_t blockNumber, bool dirty);
-#else  // USE_MULTIPLE_CARDS
-  static bool cacheFlush();
-  static bool cacheRawBlock(uint32_t blockNumber, bool dirty);
-#endif  // USE_MULTIPLE_CARDS
-  // used by SdBaseFile write to assign cache to SD location
-  void cacheSetBlockNumber(uint32_t blockNumber, bool dirty) {
-    cacheDirty_ = dirty;
-    cacheBlockNumber_  = blockNumber;
-  }
-  void cacheSetDirty() {cacheDirty_ |= CACHE_FOR_WRITE;}
-  bool chainSize(uint32_t beginCluster, uint32_t* size);
-  bool fatGet(uint32_t cluster, uint32_t* value);
-  bool fatPut(uint32_t cluster, uint32_t value);
-  bool fatPutEOC(uint32_t cluster) {
-    return fatPut(cluster, 0x0FFFFFFF);
-  }
-  bool freeChain(uint32_t cluster);
-  bool isEOC(uint32_t cluster) const {
-    if (FAT12_SUPPORT && fatType_ == 12) return  cluster >= FAT12EOC_MIN;
-    if (fatType_ == 16) return cluster >= FAT16EOC_MIN;
-    return  cluster >= FAT32EOC_MIN;
-  }
-  bool readBlock(uint32_t block, uint8_t* dst) {
-    return sdCard_->readBlock(block, dst);
-  }
-  bool writeBlock(uint32_t block, const uint8_t* dst) {
-    return sdCard_->writeBlock(block, dst);
-  }
-  //------------------------------------------------------------------------------
-  // Deprecated functions  - suppress cpplint warnings with NOLINT comment
-#if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
- public:
-  /** \deprecated Use: bool SdVolume::init(Sd2Card* dev);
-   * \param[in] dev The SD card where the volume is located.
-   * \return true for success or false for failure.
-   */
-  bool init(Sd2Card& dev) {return init(&dev);}  // NOLINT
-  /** \deprecated Use: bool SdVolume::init(Sd2Card* dev, uint8_t vol);
-   * \param[in] dev The SD card where the volume is located.
-   * \param[in] part The partition to be used.
-   * \return true for success or false for failure.
-   */
-  bool init(Sd2Card& dev, uint8_t part) {  // NOLINT
-    return init(&dev, part);
-  }
-#endif  // ALLOW_DEPRECATED_FUNCTIONS
-};
-#endif  // SdVolume
-#endif

Marlin/Version.h

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
  * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,76 +19,58 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+#pragma once
+
+////////////////////////////
+// VENDOR VERSION EXAMPLE //
+////////////////////////////
 
 /**
- * This file is the standard Marlin version identifier file, all fields can be
- * overriden by the ones defined on _Version.h by using the Configuration.h
- * directive USE_AUTOMATIC_VERSIONING.
+ * Marlin release version identifier
  */
+#define SHORT_BUILD_VERSION "2.0.5_R10"
 
-#if ENABLED(USE_AUTOMATIC_VERSIONING)
+/**
+ * Verbose version identifier which should contain a reference to the location
+ * from where the binary was downloaded or the source code was compiled.
+ */
+#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
 
-  #include "_Version.h"
+/**
+ * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+ * here we define this default string as the date where the latest release
+ * version was tagged.
+ */
+#define STRING_DISTRIBUTION_DATE "2020-03-25"
 
-#else
+/**
+ * Defines a generic printer name to be output to the LCD after booting Marlin.
+ */
+#define MACHINE_NAME "TM3D Raptor"
 
-  /**
-   * Marlin release version identifier
-   */
-  #define SHORT_BUILD_VERSION "bugfix-1.1.x"
+/**
+ * The SOURCE_CODE_URL is the location where users will find the Marlin Source
+ * Code which is installed on the device. In most cases —unless the manufacturer
+ * has a distinct Github fork— the Source Code URL should just be the main
+ * Marlin repository.
+ */
+#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/Raptor_2.0.X"
 
-  /**
-   * Verbose version identifier which should contain a reference to the location
-   * from where the binary was downloaded or the source code was compiled.
-   */
-  #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
+/**
+ * Default generic printer UUID.
+ */
+//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
 
-  /**
-   * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
-   * here we define this default string as the date where the latest release
-   * version was tagged.
-   */
-  #define STRING_DISTRIBUTION_DATE "2017-05-04 12:00"
+/**
+ * The WEBSITE_URL is the location where users can get more information such as
+ * documentation about a specific Marlin release.
+ */
+#define WEBSITE_URL "tinymachines3d.com"
 
-  /**
-   * Required minimum Configuration.h and Configuration_adv.h file versions.
-   *
-   * You must increment this version number for every significant change such as,
-   * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on
-   * the configuration files.
-   */
-  #define REQUIRED_CONFIGURATION_H_VERSION 010100
-  #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010100
-
-  /**
-   * The protocol for communication to the host. Protocol indicates communication
-   * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
-   * (Other behaviors are given by the firmware version and capabilities report.)
-   */
-  #define PROTOCOL_VERSION "1.0"
-
-  /**
-   * Defines a generic printer name to be output to the LCD after booting Marlin.
-   */
-  #define MACHINE_NAME "3D Printer"
-
-  /**
-   * The SOURCE_CODE_URL is the location where users will find the Marlin Source
-   * Code which is installed on the device. In most cases —unless the manufacturer
-   * has a distinct Github fork— the Source Code URL should just be the main
-   * Marlin repository.
-   */
-  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
-
-  /**
-   * Default generic printer UUID.
-   */
-  #define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
-
-  /**
-   * The WEBSITE_URL is the location where users can get more information such as
-   * documentation about a specific Marlin release.
-   */
-  #define WEBSITE_URL "http://marlinfw.org"
-
-#endif // USE_AUTOMATIC_VERSIONING
+/**
+ * Set the vendor info the serial USB interface, if changable
+ * Currently only supported by DUE platform
+ */
+//#define  USB_DEVICE_VENDOR_ID           0x0000
+//#define  USB_DEVICE_PRODUCT_ID          0x0000
+//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -0,0 +1,105 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
+#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF,
+0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF,
+0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F,
+0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F,
+0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F,
+0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F,
+0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F,
+0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
+0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F,
+0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F,
+0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F,
+0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F,
+0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F,
+0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
+0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F,
+0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7,
+0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7,
+0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3,
+0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3,
+0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7,
+0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7,
+0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
+};
+
+
+

Marlin/_Statusscreen.h

@@ -0,0 +1,74 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y            3
+#define STATUS_LOGO_WIDTH       24
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+  B11111111,B11111111,B11111111,
+  B10000000,B00000000,B00000001,
+  B10001110,B00000000,B11100001,
+  B10011111,B00000001,B11110001,
+  B10010011,B10000001,B00111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10000001,B11111001,
+  B10011111,B10111001,B11111001,
+  B10001111,B00101000,B11110001,
+  B10000000,B00111000,B00000001,
+  B10000000,B00000000,B00000001,
+  B10011111,B11111111,B11111001,
+  B10010001,B01110100,B10011001,
+  B10011011,B00000110,B10101001,
+  B10011011,B01010100,B10101001,
+  B10011011,B01010110,B10101001,
+  B10011011,B01010100,B10011001,
+  B10011111,B11111111,B11111001,
+  B11111111,B11111111,B11111111
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#if HOTENDS < 2
+  #define STATUS_LOGO_X          8
+  #define STATUS_HEATERS_X      40
+  #define STATUS_BED_X          72
+#else
+  #define STATUS_LOGO_X          0
+  #define STATUS_HEATERS_X      32
+  #define STATUS_BED_X          80
+#endif

Marlin/boards.h

@@ -1,106 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef BOARDS_H
-#define BOARDS_H
-
-#define BOARD_UNKNOWN -1
-
-#define BOARD_GEN7_CUSTOM       10   // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
-#define BOARD_GEN7_12           11   // Gen7 v1.1, v1.2
-#define BOARD_GEN7_13           12   // Gen7 v1.3
-#define BOARD_GEN7_14           13   // Gen7 v1.4
-#define BOARD_CNCONTROLS_11     111  // Cartesio CN Controls V11
-#define BOARD_CNCONTROLS_12     112  // Cartesio CN Controls V12
-#define BOARD_CHEAPTRONIC       2    // Cheaptronic v1.0
-#define BOARD_CHEAPTRONIC_V2    21   // Cheaptronic v2.0
-#define BOARD_SETHI             20   // Sethi 3D_1
-#define BOARD_MIGHTYBOARD_REVE  200  // Makerbot Mightyboard Revision E
-#define BOARD_RAMPS_OLD         3    // MEGA/RAMPS up to 1.2
-#define BOARD_RAMPS_13_EFB      33   // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
-#define BOARD_RAMPS_13_EEB      34   // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
-#define BOARD_RAMPS_13_EFF      35   // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
-#define BOARD_RAMPS_13_EEF      36   // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
-#define BOARD_RAMPS_13_SF       38   // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
-#define BOARD_FELIX2            37   // Felix 2.0+ Electronics Board (RAMPS like)
-#define BOARD_RIGIDBOARD        42   // Invent-A-Part RigidBoard
-#define BOARD_RIGIDBOARD_V2     52   // Invent-A-Part RigidBoard V2
-#define BOARD_RAMPS_14_EFB      43   // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
-#define BOARD_RAMPS_14_EEB      44   // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
-#define BOARD_RAMPS_14_EFF      45   // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
-#define BOARD_RAMPS_14_EEF      46   // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
-#define BOARD_RAMPS_14_SF       48   // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
-#define BOARD_GEN6              5    // Gen6
-#define BOARD_GEN6_DELUXE       51   // Gen6 deluxe
-#define BOARD_SANGUINOLOLU_11   6    // Sanguinololu < 1.2
-#define BOARD_SANGUINOLOLU_12   62   // Sanguinololu 1.2 and above
-#define BOARD_MELZI             63   // Melzi
-#define BOARD_MELZI_MAKR3D      66   // Melzi with ATmega1284 (MaKr3d version)
-#define BOARD_MELZI_CREALITY    89   // Melzi Creality3D board (for CR-10 etc)
-#define BOARD_STB_11            64   // STB V1.1
-#define BOARD_AZTEEG_X1         65   // Azteeg X1
-#define BOARD_AZTEEG_X3         67   // Azteeg X3
-#define BOARD_AZTEEG_X3_PRO     68   // Azteeg X3 Pro
-#define BOARD_ANET_10           69   // Anet 1.0 (Melzi clone)
-#define BOARD_ULTIMAKER         7    // Ultimaker
-#define BOARD_ULTIMAKER_OLD     71   // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-#define BOARD_ULTIMAIN_2        72   // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-#define BOARD_GT2560_REV_A      74   // Geeetech GT2560 Rev. A
-#define BOARD_GT2560_REV_A_PLUS 75   // Geeetech GT2560 Rev. A+ (with auto level probe)
-#define BOARD_3DRAG             77   // 3Drag Controller
-#define BOARD_K8200             78   // Velleman K8200 Controller (derived from 3Drag Controller)
-#define BOARD_K8400             79   // Velleman K8400 Controller (derived from 3Drag Controller)
-#define BOARD_TEENSYLU          8    // Teensylu
-#define BOARD_RUMBA             80   // Rumba
-#define BOARD_PRINTRBOARD       81   // Printrboard (AT90USB1286)
-#define BOARD_PRINTRBOARD_REVF  811  // Printrboard Revision F (AT90USB1286)
-#define BOARD_BRAINWAVE         82   // Brainwave (AT90USB646)
-#define BOARD_SAV_MKI           83   // SAV Mk-I (AT90USB1286)
-#define BOARD_TEENSY2           84   // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84  make
-#define BOARD_BRAINWAVE_PRO     85   // Brainwave Pro (AT90USB1286)
-#define BOARD_GEN3_PLUS         9    // Gen3+
-#define BOARD_GEN3_MONOLITHIC   22   // Gen3 Monolithic Electronics
-#define BOARD_MEGATRONICS       70   // Megatronics
-#define BOARD_MEGATRONICS_2     701  // Megatronics v2.0
-#define BOARD_MINITRONICS       702  // Minitronics v1.0/1.1
-#define BOARD_MEGATRONICS_3     703  // Megatronics v3.0
-#define BOARD_MEGATRONICS_31    704  // Megatronics v3.1
-#define BOARD_OMCA_A            90   // Alpha OMCA board
-#define BOARD_OMCA              91   // Final OMCA board
-#define BOARD_RAMBO             301  // Rambo
-#define BOARD_MINIRAMBO         302  // Mini-Rambo
-#define BOARD_SCOOVO_X9H        303  // abee Scoovo X9H
-#define BOARD_MEGACONTROLLER    310  // Mega controller
-#define BOARD_ELEFU_3           21   // Elefu Ra Board (v3)
-#define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
-#define BOARD_LEAPFROG          999  // Leapfrog
-#define BOARD_MKS_BASE          40   // MKS BASE 1.0
-#define BOARD_MKS_13            47   // MKS v1.3 or 1.4 (maybe higher)
-#define BOARD_SAINSMART_2IN1    49   // Sainsmart 2-in-1 board
-#define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
-#define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
-#define BOARD_BQ_ZUM_MEGA_3D    503  // bq ZUM Mega 3D
-#define BOARD_ZRIB_V20          504  // zrib V2.0 control board (Chinese knock off RAMPS replica)
-
-#define MB(board) (MOTHERBOARD==BOARD_##board)
-
-#endif // __BOARDS_H

Marlin/buzzer.h

@@ -1,146 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef __BUZZER_H__
-#define __BUZZER_H__
-
-#include "types.h"
-#include "fastio.h"
-#include "circularqueue.h"
-#include "temperature.h"
-
-#include "MarlinConfig.h"
-
-#define TONE_QUEUE_LENGTH 4
-
-/**
- * @brief Tone structure
- * @details Simple abstraction of a tone based on a duration and a frequency.
- */
-struct tone_t {
-  uint16_t duration;
-  uint16_t frequency;
-};
-
-/**
- * @brief Buzzer class
- */
-class Buzzer {
-  private:
-    struct state_t {
-      tone_t   tone;
-      uint32_t endtime;
-    } state;
-
-  protected:
-    CircularQueue<tone_t, TONE_QUEUE_LENGTH> buffer;
-
-    /**
-     * @brief Inverts the sate of a digital PIN
-     * @details This will invert the current state of an digital IO pin.
-     */
-    void invert() {
-      TOGGLE(BEEPER_PIN);
-    }
-
-    /**
-     * @brief Turn off a digital PIN
-     * @details Alias of digitalWrite(PIN, LOW) using FastIO
-     */
-    void off() {
-      WRITE(BEEPER_PIN, LOW);
-    }
-
-    /**
-     * @brief Turn on a digital PIN
-     * @details Alias of digitalWrite(PIN, HIGH) using FastIO
-     */
-    void on() {
-      WRITE(BEEPER_PIN, HIGH);
-    }
-
-    /**
-     * @brief Resets the state of the class
-     * @details Brings the class state to a known one.
-     */
-    void reset() {
-      this->off();
-      this->state.endtime = 0;
-    }
-
-  public:
-    /**
-     * @brief Class constructor
-     */
-    Buzzer() {
-      SET_OUTPUT(BEEPER_PIN);
-      this->reset();
-    }
-
-    /**
-     * @brief Add a tone to the queue
-     * @details Adds a tone_t structure to the ring buffer, will block IO if the
-     *          queue is full waiting for one slot to get available.
-     *
-     * @param duration Duration of the tone in milliseconds
-     * @param frequency Frequency of the tone in hertz
-     */
-    void tone(const uint16_t &duration, const uint16_t &frequency = 0) {
-      while (buffer.isFull()) {
-        this->tick();
-        thermalManager.manage_heater();
-      }
-      tone_t tone = { duration, frequency };
-      this->buffer.enqueue(tone);
-    }
-
-    /**
-     * @brief Loop function
-     * @details This function should be called at loop, it will take care of
-     *          playing the tones in the queue.
-     */
-    virtual void tick() {
-      const millis_t now = millis();
-
-      if (!this->state.endtime) {
-        if (this->buffer.isEmpty()) return;
-
-        this->state.tone = this->buffer.dequeue();
-        this->state.endtime = now + this->state.tone.duration;
-
-        if (this->state.tone.frequency > 0) {
-          #if ENABLED(SPEAKER)
-            CRITICAL_SECTION_START;
-            ::tone(BEEPER_PIN, this->state.tone.frequency, this->state.tone.duration);
-            CRITICAL_SECTION_END;
-          #else
-            this->on();
-          #endif
-        }
-      }
-      else if (ELAPSED(now, this->state.endtime)) this->reset();
-    }
-};
-
-extern Buzzer buzzer;
-
-#endif

Marlin/cardreader.cpp

@@ -1,885 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include "cardreader.h"
-
-#include "ultralcd.h"
-#include "stepper.h"
-#include "language.h"
-
-#include "Marlin.h"
-
-#if ENABLED(SDSUPPORT)
-
-#define LONGEST_FILENAME (longFilename[0] ? longFilename : filename)
-
-CardReader::CardReader() {
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    sort_count = 0;
-    #if ENABLED(SDSORT_GCODE)
-      sort_alpha = true;
-      sort_folders = FOLDER_SORTING;
-      //sort_reverse = false;
-    #endif
-  #endif
-  sdprinting = cardOK = saving = logging = false;
-  filesize = 0;
-  sdpos = 0;
-  workDirDepth = 0;
-  file_subcall_ctr = 0;
-  ZERO(workDirParents);
-
-  autostart_stilltocheck = true; //the SD start is delayed, because otherwise the serial cannot answer fast enough to make contact with the host software.
-  autostart_index = 0;
-
-  //power to SD reader
-  #if SDPOWER > -1
-    OUT_WRITE(SDPOWER, HIGH);
-  #endif // SDPOWER
-
-  next_autostart_ms = millis() + 5000;
-}
-
-char *createFilename(char *buffer, const dir_t &p) { //buffer > 12characters
-  char *pos = buffer;
-  for (uint8_t i = 0; i < 11; i++) {
-    if (p.name[i] == ' ') continue;
-    if (i == 8) *pos++ = '.';
-    *pos++ = p.name[i];
-  }
-  *pos++ = 0;
-  return buffer;
-}
-
-/**
- * Dive into a folder and recurse depth-first to perform a pre-set operation lsAction:
- *   LS_Count       - Add +1 to nrFiles for every file within the parent
- *   LS_GetFilename - Get the filename of the file indexed by nrFiles
- *   LS_SerialPrint - Print the full path and size of each file to serial output
- */
-void CardReader::lsDive(const char *prepend, SdFile parent, const char * const match/*=NULL*/) {
-  dir_t p;
-  uint8_t cnt = 0;
-
-  // Read the next entry from a directory
-  while (parent.readDir(p, longFilename) > 0) {
-
-    // If the entry is a directory and the action is LS_SerialPrint
-    if (DIR_IS_SUBDIR(&p) && lsAction != LS_Count && lsAction != LS_GetFilename) {
-
-      // Get the short name for the item, which we know is a folder
-      char lfilename[FILENAME_LENGTH];
-      createFilename(lfilename, p);
-
-      // Allocate enough stack space for the full path to a folder, trailing slash, and nul
-      bool prepend_is_empty = (prepend[0] == '\0');
-      int len = (prepend_is_empty ? 1 : strlen(prepend)) + strlen(lfilename) + 1 + 1;
-      char path[len];
-
-      // Append the FOLDERNAME12/ to the passed string.
-      // It contains the full path to the "parent" argument.
-      // We now have the full path to the item in this folder.
-      strcpy(path, prepend_is_empty ? "/" : prepend); // root slash if prepend is empty
-      strcat(path, lfilename); // FILENAME_LENGTH-1 characters maximum
-      strcat(path, "/");       // 1 character
-
-      // Serial.print(path);
-
-      // Get a new directory object using the full path
-      // and dive recursively into it.
-      SdFile dir;
-      if (!dir.open(parent, lfilename, O_READ)) {
-        if (lsAction == LS_SerialPrint) {
-          SERIAL_ECHO_START();
-          SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
-          SERIAL_ECHOLN(lfilename);
-        }
-      }
-      lsDive(path, dir);
-      // close() is done automatically by destructor of SdFile
-    }
-    else {
-      uint8_t pn0 = p.name[0];
-      if (pn0 == DIR_NAME_FREE) break;
-      if (pn0 == DIR_NAME_DELETED || pn0 == '.') continue;
-      if (longFilename[0] == '.') continue;
-
-      if (!DIR_IS_FILE_OR_SUBDIR(&p) || (p.attributes & DIR_ATT_HIDDEN)) continue;
-
-      filenameIsDir = DIR_IS_SUBDIR(&p);
-
-      if (!filenameIsDir && (p.name[8] != 'G' || p.name[9] == '~')) continue;
-
-      switch (lsAction) {
-        case LS_Count:
-          nrFiles++;
-          break;
-
-        case LS_SerialPrint:
-          createFilename(filename, p);
-          SERIAL_PROTOCOL(prepend);
-          SERIAL_PROTOCOL(filename);
-          SERIAL_PROTOCOLCHAR(' ');
-          SERIAL_PROTOCOLLN(p.fileSize);
-          break;
-
-        case LS_GetFilename:
-          createFilename(filename, p);
-          if (match != NULL) {
-            if (strcasecmp(match, filename) == 0) return;
-          }
-          else if (cnt == nrFiles) return;
-          cnt++;
-          break;
-      }
-
-    }
-  } // while readDir
-}
-
-void CardReader::ls() {
-  lsAction = LS_SerialPrint;
-  root.rewind();
-  lsDive("", root);
-}
-
-#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
-
-  /**
-   * Get a long pretty path based on a DOS 8.3 path
-   */
-  void CardReader::printLongPath(char *path) {
-    lsAction = LS_GetFilename;
-
-    int i, pathLen = strlen(path);
-
-    // SERIAL_ECHOPGM("Full Path: "); SERIAL_ECHOLN(path);
-
-    // Zero out slashes to make segments
-    for (i = 0; i < pathLen; i++) if (path[i] == '/') path[i] = '\0';
-
-    SdFile diveDir = root; // start from the root for segment 1
-    for (i = 0; i < pathLen;) {
-
-      if (path[i] == '\0') i++; // move past a single nul
-
-      char *segment = &path[i]; // The segment after most slashes
-
-      // If a segment is empty (extra-slash) then exit
-      if (!*segment) break;
-
-      // Go to the next segment
-      while (path[++i]) { }
-
-      // SERIAL_ECHOPGM("Looking for segment: "); SERIAL_ECHOLN(segment);
-
-      // Find the item, setting the long filename
-      diveDir.rewind();
-      lsDive("", diveDir, segment);
-
-      // Print /LongNamePart to serial output
-      SERIAL_PROTOCOLCHAR('/');
-      SERIAL_PROTOCOL(longFilename[0] ? longFilename : "???");
-
-      // If the filename was printed then that's it
-      if (!filenameIsDir) break;
-
-      // SERIAL_ECHOPGM("Opening dir: "); SERIAL_ECHOLN(segment);
-
-      // Open the sub-item as the new dive parent
-      SdFile dir;
-      if (!dir.open(diveDir, segment, O_READ)) {
-        SERIAL_EOL();
-        SERIAL_ECHO_START();
-        SERIAL_ECHOPGM(MSG_SD_CANT_OPEN_SUBDIR);
-        SERIAL_ECHO(segment);
-        break;
-      }
-
-      diveDir.close();
-      diveDir = dir;
-
-    } // while i<pathLen
-
-    SERIAL_EOL();
-  }
-
-#endif // LONG_FILENAME_HOST_SUPPORT
-
-void CardReader::initsd() {
-  cardOK = false;
-  if (root.isOpen()) root.close();
-
-  #ifndef SPI_SPEED
-    #define SPI_SPEED SPI_FULL_SPEED
-  #endif
-
-  if (!card.init(SPI_SPEED, SDSS)
-    #if defined(LCD_SDSS) && (LCD_SDSS != SDSS)
-      && !card.init(SPI_SPEED, LCD_SDSS)
-    #endif
-  ) {
-    //if (!card.init(SPI_HALF_SPEED,SDSS))
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
-  }
-  else if (!volume.init(&card)) {
-    SERIAL_ERROR_START();
-    SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
-  }
-  else if (!root.openRoot(&volume)) {
-    SERIAL_ERROR_START();
-    SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL);
-  }
-  else {
-    cardOK = true;
-    SERIAL_ECHO_START();
-    SERIAL_ECHOLNPGM(MSG_SD_CARD_OK);
-  }
-  workDir = root;
-  curDir = &root;
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    presort();
-  #endif
-  /**
-  if (!workDir.openRoot(&volume)) {
-    SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
-  }
-  */
-}
-
-void CardReader::setroot() {
-  /*if (!workDir.openRoot(&volume)) {
-    SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
-  }*/
-  workDir = root;
-  curDir = &workDir;
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    presort();
-  #endif
-}
-
-void CardReader::release() {
-  sdprinting = false;
-  cardOK = false;
-}
-
-void CardReader::openAndPrintFile(const char *name) {
-  char cmd[4 + strlen(name) + 1]; // Room for "M23 ", filename, and null
-  sprintf_P(cmd, PSTR("M23 %s"), name);
-  for (char *c = &cmd[4]; *c; c++) *c = tolower(*c);
-  enqueue_and_echo_command(cmd);
-  enqueue_and_echo_commands_P(PSTR("M24"));
-}
-
-void CardReader::startFileprint() {
-  if (cardOK) {
-    sdprinting = true;
-    #if ENABLED(SDCARD_SORT_ALPHA)
-      flush_presort();
-    #endif
-  }
-}
-
-void CardReader::stopSDPrint() {
-  sdprinting = false;
-  if (isFileOpen()) file.close();
-}
-
-void CardReader::openLogFile(char* name) {
-  logging = true;
-  openFile(name, false);
-}
-
-void CardReader::getAbsFilename(char *t) {
-  uint8_t cnt = 0;
-  *t = '/'; t++; cnt++;
-  for (uint8_t i = 0; i < workDirDepth; i++) {
-    workDirParents[i].getFilename(t); //SDBaseFile.getfilename!
-    while (*t && cnt < MAXPATHNAMELENGTH) { t++; cnt++; } //crawl counter forward.
-  }
-  if (cnt < MAXPATHNAMELENGTH - (FILENAME_LENGTH))
-    file.getFilename(t);
-  else
-    t[0] = 0;
-}
-
-void CardReader::openFile(char* name, bool read, bool push_current/*=false*/) {
-
-  if (!cardOK) return;
-
-  uint8_t doing = 0;
-  if (isFileOpen()) { //replacing current file by new file, or subfile call
-    if (push_current) {
-      if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
-        SERIAL_ERROR_START();
-        SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
-        SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
-        kill(PSTR(MSG_KILLED));
-        return;
-      }
-
-      // Store current filename and position
-      getAbsFilename(proc_filenames[file_subcall_ctr]);
-
-      SERIAL_ECHO_START();
-      SERIAL_ECHOPAIR("SUBROUTINE CALL target:\"", name);
-      SERIAL_ECHOPAIR("\" parent:\"", proc_filenames[file_subcall_ctr]);
-      SERIAL_ECHOLNPAIR("\" pos", sdpos);
-      filespos[file_subcall_ctr] = sdpos;
-      file_subcall_ctr++;
-    }
-    else {
-      doing = 1;
-    }
-  }
-  else { // Opening fresh file
-    doing = 2;
-    file_subcall_ctr = 0; // Reset procedure depth in case user cancels print while in procedure
-  }
-
-  if (doing) {
-    SERIAL_ECHO_START();
-    SERIAL_ECHOPGM("Now ");
-    SERIAL_ECHO(doing == 1 ? "doing" : "fresh");
-    SERIAL_ECHOLNPAIR(" file: ", name);
-  }
-
-  stopSDPrint();
-
-  SdFile myDir;
-  curDir = &root;
-  char *fname = name;
-  char *dirname_start, *dirname_end;
-
-  if (name[0] == '/') {
-    dirname_start = &name[1];
-    while (dirname_start != NULL) {
-      dirname_end = strchr(dirname_start, '/');
-      //SERIAL_ECHOPGM("start:");SERIAL_ECHOLN((int)(dirname_start - name));
-      //SERIAL_ECHOPGM("end  :");SERIAL_ECHOLN((int)(dirname_end - name));
-      if (dirname_end != NULL && dirname_end > dirname_start) {
-        char subdirname[FILENAME_LENGTH];
-        strncpy(subdirname, dirname_start, dirname_end - dirname_start);
-        subdirname[dirname_end - dirname_start] = 0;
-        SERIAL_ECHOLN(subdirname);
-        if (!myDir.open(curDir, subdirname, O_READ)) {
-          SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
-          SERIAL_PROTOCOL(subdirname);
-          SERIAL_PROTOCOLCHAR('.');
-          return;
-        }
-        else {
-          //SERIAL_ECHOLNPGM("dive ok");
-        }
-
-        curDir = &myDir;
-        dirname_start = dirname_end + 1;
-      }
-      else { // the remainder after all /fsa/fdsa/ is the filename
-        fname = dirname_start;
-        //SERIAL_ECHOLNPGM("remainder");
-        //SERIAL_ECHOLN(fname);
-        break;
-      }
-    }
-  }
-  else { //relative path
-    curDir = &workDir;
-  }
-
-  if (read) {
-    if (file.open(curDir, fname, O_READ)) {
-      filesize = file.fileSize();
-      SERIAL_PROTOCOLPAIR(MSG_SD_FILE_OPENED, fname);
-      SERIAL_PROTOCOLLNPAIR(MSG_SD_SIZE, filesize);
-      sdpos = 0;
-
-      SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
-      getfilename(0, fname);
-      lcd_setstatus(longFilename[0] ? longFilename : fname);
-    }
-    else {
-      SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
-      SERIAL_PROTOCOLCHAR('.');
-      SERIAL_EOL();
-    }
-  }
-  else { //write
-    if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
-      SERIAL_PROTOCOLPAIR(MSG_SD_OPEN_FILE_FAIL, fname);
-      SERIAL_PROTOCOLCHAR('.');
-      SERIAL_EOL();
-    }
-    else {
-      saving = true;
-      SERIAL_PROTOCOLLNPAIR(MSG_SD_WRITE_TO_FILE, name);
-      lcd_setstatus(fname);
-    }
-  }
-}
-
-void CardReader::removeFile(char* name) {
-  if (!cardOK) return;
-
-  stopSDPrint();
-
-  SdFile myDir;
-  curDir = &root;
-  char *fname = name;
-
-  char *dirname_start, *dirname_end;
-  if (name[0] == '/') {
-    dirname_start = strchr(name, '/') + 1;
-    while (dirname_start != NULL) {
-      dirname_end = strchr(dirname_start, '/');
-      //SERIAL_ECHOPGM("start:");SERIAL_ECHOLN((int)(dirname_start - name));
-      //SERIAL_ECHOPGM("end  :");SERIAL_ECHOLN((int)(dirname_end - name));
-      if (dirname_end != NULL && dirname_end > dirname_start) {
-        char subdirname[FILENAME_LENGTH];
-        strncpy(subdirname, dirname_start, dirname_end - dirname_start);
-        subdirname[dirname_end - dirname_start] = 0;
-        SERIAL_ECHOLN(subdirname);
-        if (!myDir.open(curDir, subdirname, O_READ)) {
-          SERIAL_PROTOCOLPAIR("open failed, File: ", subdirname);
-          SERIAL_PROTOCOLCHAR('.');
-          SERIAL_EOL();
-          return;
-        }
-        else {
-          //SERIAL_ECHOLNPGM("dive ok");
-        }
-
-        curDir = &myDir;
-        dirname_start = dirname_end + 1;
-      }
-      else { // the remainder after all /fsa/fdsa/ is the filename
-        fname = dirname_start;
-        //SERIAL_ECHOLNPGM("remainder");
-        //SERIAL_ECHOLN(fname);
-        break;
-      }
-    }
-  }
-  else { // relative path
-    curDir = &workDir;
-  }
-
-  if (file.remove(curDir, fname)) {
-    SERIAL_PROTOCOLPGM("File deleted:");
-    SERIAL_PROTOCOLLN(fname);
-    sdpos = 0;
-    #if ENABLED(SDCARD_SORT_ALPHA)
-      presort();
-    #endif
-  }
-  else {
-    SERIAL_PROTOCOLPGM("Deletion failed, File: ");
-    SERIAL_PROTOCOL(fname);
-    SERIAL_PROTOCOLCHAR('.');
-  }
-}
-
-void CardReader::getStatus() {
-  if (cardOK) {
-    SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
-    SERIAL_PROTOCOL(sdpos);
-    SERIAL_PROTOCOLCHAR('/');
-    SERIAL_PROTOCOLLN(filesize);
-  }
-  else {
-    SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING);
-  }
-}
-
-void CardReader::write_command(char *buf) {
-  char* begin = buf;
-  char* npos = 0;
-  char* end = buf + strlen(buf) - 1;
-
-  file.writeError = false;
-  if ((npos = strchr(buf, 'N')) != NULL) {
-    begin = strchr(npos, ' ') + 1;
-    end = strchr(npos, '*') - 1;
-  }
-  end[1] = '\r';
-  end[2] = '\n';
-  end[3] = '\0';
-  file.write(begin);
-  if (file.writeError) {
-    SERIAL_ERROR_START();
-    SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE);
-  }
-}
-
-void CardReader::checkautostart(bool force) {
-  if (!force && (!autostart_stilltocheck || ELAPSED(millis(), next_autostart_ms)))
-    return;
-
-  autostart_stilltocheck = false;
-
-  if (!cardOK) {
-    initsd();
-    if (!cardOK) return; // fail
-  }
-
-  char autoname[10];
-  sprintf_P(autoname, PSTR("auto%i.g"), autostart_index);
-  for (int8_t i = 0; i < (int8_t)strlen(autoname); i++) autoname[i] = tolower(autoname[i]);
-
-  dir_t p;
-
-  root.rewind();
-
-  bool found = false;
-  while (root.readDir(p, NULL) > 0) {
-    for (int8_t i = (int8_t)strlen((char*)p.name); i--;) p.name[i] = tolower(p.name[i]);
-    if (p.name[9] != '~' && strncmp((char*)p.name, autoname, 5) == 0) {
-      openAndPrintFile(autoname);
-      found = true;
-    }
-  }
-  if (!found)
-    autostart_index = -1;
-  else
-    autostart_index++;
-}
-
-void CardReader::closefile(bool store_location) {
-  file.sync();
-  file.close();
-  saving = logging = false;
-
-  if (store_location) {
-    //future: store printer state, filename and position for continuing a stopped print
-    // so one can unplug the printer and continue printing the next day.
-  }
-}
-
-/**
- * Get the name of a file in the current directory by index
- */
-void CardReader::getfilename(uint16_t nr, const char * const match/*=NULL*/) {
-  #if ENABLED(SDSORT_CACHE_NAMES)
-    if (match != NULL) {
-      while (nr < sort_count) {
-        if (strcasecmp(match, sortshort[nr]) == 0) break;
-        nr++;
-      }
-    }
-    if (nr < sort_count) {
-      strcpy(filename, sortshort[nr]);
-      strcpy(longFilename, sortnames[nr]);
-      filenameIsDir = TEST(isDir[nr>>3], nr & 0x07);
-      return;
-    }
-  #endif // SDSORT_CACHE_NAMES
-  curDir = &workDir;
-  lsAction = LS_GetFilename;
-  nrFiles = nr;
-  curDir->rewind();
-  lsDive("", *curDir, match);
-}
-
-uint16_t CardReader::getnrfilenames() {
-  curDir = &workDir;
-  lsAction = LS_Count;
-  nrFiles = 0;
-  curDir->rewind();
-  lsDive("", *curDir);
-  //SERIAL_ECHOLN(nrFiles);
-  return nrFiles;
-}
-
-void CardReader::chdir(const char * relpath) {
-  SdFile newfile;
-  SdFile *parent = &root;
-
-  if (workDir.isOpen()) parent = &workDir;
-
-  if (!newfile.open(*parent, relpath, O_READ)) {
-    SERIAL_ECHO_START();
-    SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
-    SERIAL_ECHOLN(relpath);
-  }
-  else {
-    if (workDirDepth < MAX_DIR_DEPTH)
-      workDirParents[workDirDepth++] = *parent;
-    workDir = newfile;
-    #if ENABLED(SDCARD_SORT_ALPHA)
-      presort();
-    #endif
-  }
-}
-
-void CardReader::updir() {
-  if (workDirDepth > 0) {
-    workDir = workDirParents[--workDirDepth];
-    #if ENABLED(SDCARD_SORT_ALPHA)
-      presort();
-    #endif
-  }
-}
-
-#if ENABLED(SDCARD_SORT_ALPHA)
-
-  /**
-   * Get the name of a file in the current directory by sort-index
-   */
-  void CardReader::getfilename_sorted(const uint16_t nr) {
-    getfilename(
-      #if ENABLED(SDSORT_GCODE)
-        sort_alpha &&
-      #endif
-      (nr < sort_count) ? sort_order[nr] : nr
-    );
-  }
-
-  /**
-   * Read all the files and produce a sort key
-   *
-   * We can do this in 3 ways...
-   *  - Minimal RAM: Read two filenames at a time sorting along...
-   *  - Some RAM: Buffer the directory just for this sort
-   *  - Most RAM: Buffer the directory and return filenames from RAM
-   */
-  void CardReader::presort() {
-
-    // Sorting may be turned off
-    #if ENABLED(SDSORT_GCODE)
-      if (!sort_alpha) return;
-    #endif
-
-    // Throw away old sort index
-    flush_presort();
-
-    // If there are files, sort up to the limit
-    uint16_t fileCnt = getnrfilenames();
-    if (fileCnt > 0) {
-
-      // Never sort more than the max allowed
-      // If you use folders to organize, 20 may be enough
-      if (fileCnt > SDSORT_LIMIT) fileCnt = SDSORT_LIMIT;
-
-      // Sort order is always needed. May be static or dynamic.
-      #if ENABLED(SDSORT_DYNAMIC_RAM)
-        sort_order = new uint8_t[fileCnt];
-      #endif
-
-      // Use RAM to store the entire directory during pre-sort.
-      // SDSORT_LIMIT should be set to prevent over-allocation.
-      #if ENABLED(SDSORT_USES_RAM)
-
-        // If using dynamic ram for names, allocate on the heap.
-        #if ENABLED(SDSORT_CACHE_NAMES)
-          #if ENABLED(SDSORT_DYNAMIC_RAM)
-            sortshort = new char*[fileCnt];
-            sortnames = new char*[fileCnt];
-          #endif
-        #elif ENABLED(SDSORT_USES_STACK)
-          char sortnames[fileCnt][LONG_FILENAME_LENGTH];
-        #endif
-
-        // Folder sorting needs 1 bit per entry for flags.
-        #if HAS_FOLDER_SORTING
-          #if ENABLED(SDSORT_DYNAMIC_RAM)
-            isDir = new uint8_t[(fileCnt + 7) >> 3];
-          #elif ENABLED(SDSORT_USES_STACK)
-            uint8_t isDir[(fileCnt + 7) >> 3];
-          #endif
-        #endif
-
-      #else // !SDSORT_USES_RAM
-
-        // By default re-read the names from SD for every compare
-        // retaining only two filenames at a time. This is very
-        // slow but is safest and uses minimal RAM.
-        char name1[LONG_FILENAME_LENGTH + 1];
-
-      #endif
-
-      if (fileCnt > 1) {
-
-        // Init sort order.
-        for (uint16_t i = 0; i < fileCnt; i++) {
-          sort_order[i] = i;
-          // If using RAM then read all filenames now.
-          #if ENABLED(SDSORT_USES_RAM)
-            getfilename(i);
-            #if ENABLED(SDSORT_DYNAMIC_RAM)
-              // Use dynamic method to copy long filename
-              sortnames[i] = strdup(LONGEST_FILENAME);
-              #if ENABLED(SDSORT_CACHE_NAMES)
-                // When caching also store the short name, since
-                // we're replacing the getfilename() behavior.
-                sortshort[i] = strdup(filename);
-              #endif
-            #else
-              // Copy filenames into the static array
-              strcpy(sortnames[i], LONGEST_FILENAME);
-              #if ENABLED(SDSORT_CACHE_NAMES)
-                strcpy(sortshort[i], filename);
-              #endif
-            #endif
-            // char out[30];
-            // sprintf_P(out, PSTR("---- %i %s %s"), i, filenameIsDir ? "D" : " ", sortnames[i]);
-            // SERIAL_ECHOLN(out);
-            #if HAS_FOLDER_SORTING
-              const uint16_t bit = i & 0x07, ind = i >> 3;
-              if (bit == 0) isDir[ind] = 0x00;
-              if (filenameIsDir) isDir[ind] |= _BV(bit);
-            #endif
-          #endif
-        }
-
-        // Bubble Sort
-        for (uint16_t i = fileCnt; --i;) {
-          bool didSwap = false;
-          for (uint16_t j = 0; j < i; ++j) {
-            const uint16_t o1 = sort_order[j], o2 = sort_order[j + 1];
-
-            // Compare names from the array or just the two buffered names
-            #if ENABLED(SDSORT_USES_RAM)
-              #define _SORT_CMP_NODIR() (strcasecmp(sortnames[o1], sortnames[o2]) > 0)
-            #else
-              #define _SORT_CMP_NODIR() (strcasecmp(name1, name2) > 0)
-            #endif
-
-            #if HAS_FOLDER_SORTING
-              #if ENABLED(SDSORT_USES_RAM)
-                // Folder sorting needs an index and bit to test for folder-ness.
-                const uint8_t ind1 = o1 >> 3, bit1 = o1 & 0x07,
-                              ind2 = o2 >> 3, bit2 = o2 & 0x07;
-                #define _SORT_CMP_DIR(fs) \
-                  (((isDir[ind1] & _BV(bit1)) != 0) == ((isDir[ind2] & _BV(bit2)) != 0) \
-                    ? _SORT_CMP_NODIR() \
-                    : (isDir[fs > 0 ? ind1 : ind2] & (fs > 0 ? _BV(bit1) : _BV(bit2))) != 0)
-              #else
-                #define _SORT_CMP_DIR(fs) ((dir1 == filenameIsDir) ? _SORT_CMP_NODIR() : (fs > 0 ? dir1 : !dir1))
-              #endif
-            #endif
-
-            // The most economical method reads names as-needed
-            // throughout the loop. Slow if there are many.
-            #if DISABLED(SDSORT_USES_RAM)
-              getfilename(o1);
-              strcpy(name1, LONGEST_FILENAME); // save (or getfilename below will trounce it)
-              #if HAS_FOLDER_SORTING
-                bool dir1 = filenameIsDir;
-              #endif
-              getfilename(o2);
-              char *name2 = LONGEST_FILENAME; // use the string in-place
-            #endif // !SDSORT_USES_RAM
-
-            // Sort the current pair according to settings.
-            if (
-              #if HAS_FOLDER_SORTING
-                #if ENABLED(SDSORT_GCODE)
-                  sort_folders ? _SORT_CMP_DIR(sort_folders) : _SORT_CMP_NODIR()
-                #else
-                  _SORT_CMP_DIR(FOLDER_SORTING)
-                #endif
-              #else
-                _SORT_CMP_NODIR()
-              #endif
-            ) {
-              sort_order[j] = o2;
-              sort_order[j + 1] = o1;
-              didSwap = true;
-            }
-          }
-          if (!didSwap) break;
-        }
-        // Using RAM but not keeping names around
-        #if ENABLED(SDSORT_USES_RAM) && DISABLED(SDSORT_CACHE_NAMES)
-          #if ENABLED(SDSORT_DYNAMIC_RAM)
-            for (uint16_t i = 0; i < fileCnt; ++i) free(sortnames[i]);
-            #if HAS_FOLDER_SORTING
-              free(isDir);
-            #endif
-          #endif
-        #endif
-      }
-      else {
-        sort_order[0] = 0;
-        #if ENABLED(SDSORT_USES_RAM) && ENABLED(SDSORT_CACHE_NAMES)
-          getfilename(0);
-          #if ENABLED(SDSORT_DYNAMIC_RAM)
-            sortnames = new char*[1];
-            sortnames[0] = strdup(LONGEST_FILENAME); // malloc
-            sortshort = new char*[1];
-            sortshort[0] = strdup(filename);         // malloc
-            isDir = new uint8_t[1];
-          #else
-            strcpy(sortnames[0], LONGEST_FILENAME);
-            strcpy(sortshort[0], filename);
-          #endif
-          isDir[0] = filenameIsDir ? 0x01 : 0x00;
-        #endif
-      }
-
-      sort_count = fileCnt;
-    }
-  }
-
-  void CardReader::flush_presort() {
-    if (sort_count > 0) {
-      #if ENABLED(SDSORT_DYNAMIC_RAM)
-        delete sort_order;
-        #if ENABLED(SDSORT_CACHE_NAMES)
-          for (uint8_t i = 0; i < sort_count; ++i) {
-            free(sortshort[i]); // strdup
-            free(sortnames[i]); // strdup
-          }
-          delete sortshort;
-          delete sortnames;
-        #endif
-      #endif
-      sort_count = 0;
-    }
-  }
-
-#endif // SDCARD_SORT_ALPHA
-
-void CardReader::printingHasFinished() {
-  stepper.synchronize();
-  file.close();
-  if (file_subcall_ctr > 0) { // Heading up to a parent file that called current as a procedure.
-    file_subcall_ctr--;
-    openFile(proc_filenames[file_subcall_ctr], true, true);
-    setIndex(filespos[file_subcall_ctr]);
-    startFileprint();
-  }
-  else {
-    sdprinting = false;
-    if (SD_FINISHED_STEPPERRELEASE)
-      enqueue_and_echo_commands_P(PSTR(SD_FINISHED_RELEASECOMMAND));
-    print_job_timer.stop();
-    if (print_job_timer.duration() > 60)
-      enqueue_and_echo_commands_P(PSTR("M31"));
-    #if ENABLED(SDCARD_SORT_ALPHA)
-      presort();
-    #endif
-  }
-}
-
-#endif // SDSUPPORT

Marlin/cardreader.h

@@ -1,190 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef CARDREADER_H
-#define CARDREADER_H
-
-#include "MarlinConfig.h"
-
-#if ENABLED(SDSUPPORT)
-
-#define MAX_DIR_DEPTH 10          // Maximum folder depth
-
-#include "SdFile.h"
-
-#include "types.h"
-#include "enum.h"
-
-class CardReader {
-public:
-  CardReader();
-
-  void initsd();
-  void write_command(char *buf);
-  //files auto[0-9].g on the sd card are performed in a row
-  //this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
-
-  void checkautostart(bool x);
-  void openFile(char* name, bool read, bool push_current=false);
-  void openLogFile(char* name);
-  void removeFile(char* name);
-  void closefile(bool store_location=false);
-  void release();
-  void openAndPrintFile(const char *name);
-  void startFileprint();
-  void stopSDPrint();
-  void getStatus();
-  void printingHasFinished();
-
-  #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
-    void printLongPath(char *path);
-  #endif
-
-  void getfilename(uint16_t nr, const char* const match=NULL);
-  uint16_t getnrfilenames();
-
-  void getAbsFilename(char *t);
-
-  void ls();
-  void chdir(const char *relpath);
-  void updir();
-  void setroot();
-
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    void presort();
-    void getfilename_sorted(const uint16_t nr);
-    #if ENABLED(SDSORT_GCODE)
-      FORCE_INLINE void setSortOn(bool b) { sort_alpha = b; presort(); }
-      FORCE_INLINE void setSortFolders(int i) { sort_folders = i; presort(); }
-      //FORCE_INLINE void setSortReverse(bool b) { sort_reverse = b; }
-    #endif
-  #endif
-
-  FORCE_INLINE void pauseSDPrint() { sdprinting = false; }
-  FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
-  FORCE_INLINE bool eof() { return sdpos >= filesize; }
-  FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
-  FORCE_INLINE void setIndex(long index) { sdpos = index; file.seekSet(index); }
-  FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; }
-  FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; }
-
-public:
-  bool saving, logging, sdprinting, cardOK, filenameIsDir;
-  char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH];
-  int autostart_index;
-private:
-  SdFile root, *curDir, workDir, workDirParents[MAX_DIR_DEPTH];
-  uint8_t workDirDepth;
-
-  // Sort files and folders alphabetically.
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    uint16_t sort_count;        // Count of sorted items in the current directory
-    #if ENABLED(SDSORT_GCODE)
-      bool sort_alpha;          // Flag to enable / disable the feature
-      int sort_folders;         // Flag to enable / disable folder sorting
-      //bool sort_reverse;      // Flag to enable / disable reverse sorting
-    #endif
-
-    // By default the sort index is static
-    #if ENABLED(SDSORT_DYNAMIC_RAM)
-      uint8_t *sort_order;
-    #else
-      uint8_t sort_order[SDSORT_LIMIT];
-    #endif
-
-    // Cache filenames to speed up SD menus.
-    #if ENABLED(SDSORT_USES_RAM)
-
-      // If using dynamic ram for names, allocate on the heap.
-      #if ENABLED(SDSORT_CACHE_NAMES)
-        #if ENABLED(SDSORT_DYNAMIC_RAM)
-          char **sortshort, **sortnames;
-        #else
-          char sortshort[SDSORT_LIMIT][FILENAME_LENGTH];
-          char sortnames[SDSORT_LIMIT][FILENAME_LENGTH];
-        #endif
-      #elif DISABLED(SDSORT_USES_STACK)
-        char sortnames[SDSORT_LIMIT][FILENAME_LENGTH];
-      #endif
-
-      // Folder sorting uses an isDir array when caching items.
-      #if HAS_FOLDER_SORTING
-        #if ENABLED(SDSORT_DYNAMIC_RAM)
-          uint8_t *isDir;
-        #elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK)
-          uint8_t isDir[(SDSORT_LIMIT+7)>>3];
-        #endif
-      #endif
-
-    #endif // SDSORT_USES_RAM
-
-  #endif // SDCARD_SORT_ALPHA
-
-  Sd2Card card;
-  SdVolume volume;
-  SdFile file;
-
-  #define SD_PROCEDURE_DEPTH 1
-  #define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
-  uint8_t file_subcall_ctr;
-  uint32_t filespos[SD_PROCEDURE_DEPTH];
-  char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
-  uint32_t filesize;
-  uint32_t sdpos;
-
-  millis_t next_autostart_ms;
-  bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
-
-  LsAction lsAction; //stored for recursion.
-  uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
-  char* diveDirName;
-  void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
-
-  #if ENABLED(SDCARD_SORT_ALPHA)
-    void flush_presort();
-  #endif
-};
-
-extern CardReader card;
-
-#define IS_SD_PRINTING (card.sdprinting)
-#define IS_SD_FILE_OPEN (card.isFileOpen())
-
-#if PIN_EXISTS(SD_DETECT)
-  #if ENABLED(SD_DETECT_INVERTED)
-    #define IS_SD_INSERTED (READ(SD_DETECT_PIN) != 0)
-  #else
-    #define IS_SD_INSERTED (READ(SD_DETECT_PIN) == 0)
-  #endif
-#else
-  //No card detect line? Assume the card is inserted.
-  #define IS_SD_INSERTED true
-#endif
-
-#else
-
-#define IS_SD_PRINTING (false)
-#define IS_SD_FILE_OPEN (false)
-
-#endif // SDSUPPORT
-
-#endif // __CARDREADER_H

Marlin/configuration_store.h

@@ -1,82 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef CONFIGURATION_STORE_H
-#define CONFIGURATION_STORE_H
-
-#include "MarlinConfig.h"
-
-class MarlinSettings {
-  public:
-    MarlinSettings() { }
-
-    static void reset();
-    static bool save();
-
-    #if ENABLED(EEPROM_SETTINGS)
-      static bool load();
-
-      #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
-                                         // That can store is enabled
-        FORCE_INLINE static int get_start_of_meshes() { return meshes_begin; }
-        FORCE_INLINE static int get_end_of_meshes() { return meshes_end; }
-        static int calc_num_meshes();
-        static void store_mesh(int8_t slot);
-        static void load_mesh(int8_t slot, void *into = 0);
-
-        //static void delete_mesh();    // necessary if we have a MAT
-        //static void defrag_meshes();  // "
-      #endif
-    #else
-      FORCE_INLINE
-      static bool load() { reset(); report(); return true; }
-    #endif
-
-    #if DISABLED(DISABLE_M503)
-      static void report(bool forReplay=false);
-    #else
-      FORCE_INLINE
-      static void report(bool forReplay=false) { UNUSED(forReplay); }
-    #endif
-
-  private:
-    static void postprocess();
-
-    #if ENABLED(EEPROM_SETTINGS)
-      static bool eeprom_error;
-
-      #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
-                                         // That can store is enabled
-        static int meshes_begin;
-        const static int meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
-                                                   // live at the very end of the eeprom
-
-      #endif
-
-      static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc);
-      static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc);
-    #endif
-};
-
-extern MarlinSettings settings;
-
-#endif // CONFIGURATION_STORE_H

Marlin/dac_mcp4728.h

@@ -1,66 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Arduino library for MicroChip MCP4728 I2C D/A converter.
- */
-
-#ifndef DAC_MCP4728_H
-#define DAC_MCP4728_H
-
-#include "MarlinConfig.h"
-
-#if ENABLED(DAC_STEPPER_CURRENT)
-#include "Wire.h"
-
-#define defaultVDD     DAC_STEPPER_MAX //was 5000 but differs with internal Vref
-#define BASE_ADDR      0x60
-#define RESET          0B00000110
-#define WAKE           0B00001001
-#define UPDATE         0B00001000
-#define MULTIWRITE     0B01000000
-#define SINGLEWRITE    0B01011000
-#define SEQWRITE       0B01010000
-#define VREFWRITE      0B10000000
-#define GAINWRITE      0B11000000
-#define POWERDOWNWRITE 0B10100000
-#define GENERALCALL    0B00000000
-#define GAINWRITE      0B11000000
-
-// This is taken from the original lib, makes it easy to edit if needed
-// DAC_OR_ADDRESS defined in pins_BOARD.h  file
-#define DAC_DEV_ADDRESS (BASE_ADDR | DAC_OR_ADDRESS)
-
-
-void mcp4728_init();
-uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
-uint8_t mcp4728_eepromWrite();
-uint8_t mcp4728_setVref_all(uint8_t value);
-uint8_t mcp4728_setGain_all(uint8_t value);
-uint16_t mcp4728_getValue(uint8_t channel);
-uint8_t mcp4728_fastWrite();
-uint8_t mcp4728_simpleCommand(byte simpleCommand);
-uint8_t mcp4728_getDrvPct(uint8_t channel);
-void mcp4728_setDrvPct(uint8_t pct[XYZE]);
-
-#endif
-#endif // DAC_MCP4728_H

Marlin/dogm_bitmaps.h

@@ -1,422 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Standard Marlin Bitmap for splashscreen
- *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
- *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
- *
- * Please note that using the high-res version takes 402Bytes of PROGMEM.
- */
-
-//#define START_BMPHIGH
-
-#if ENABLED(SHOW_BOOTSCREEN)
-  #if ENABLED(START_BMPHIGH)
-    #define START_BMPWIDTH      112
-    #define START_BMPHEIGHT      38
-    #define START_BMPBYTEWIDTH   14
-    #define START_BMPBYTES      532 // START_BMPWIDTH * START_BMPHEIGHT / 8
-
-    const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
-      0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-      0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF,
-      0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF,
-      0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF,
-      0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x3F, 0xFF,
-      0xC0, 0x0F, 0xC0, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x18, 0x00, 0x1F, 0xFF,
-      0xC0, 0x3F, 0xE1, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x0F, 0xFF,
-      0xC0, 0x7F, 0xF3, 0xFF, 0x80, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x07, 0xFF,
-      0xC0, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x03, 0xFF,
-      0xC1, 0xF8, 0x7F, 0x87, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x01, 0xFF,
-      0xC1, 0xF0, 0x3F, 0x03, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xFF,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x1F, 0x00, 0x03, 0xE0, 0x78, 0x3C, 0x03, 0xF0, 0x7F,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0xC0, 0x0F, 0xF8, 0x78, 0x3C, 0x07, 0xFC, 0x3F,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0xE0, 0x1F, 0xFC, 0x78, 0x3C, 0x0F, 0xFE, 0x1F,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0xF0, 0x3F, 0xFE, 0x78, 0x3C, 0x1F, 0xFE, 0x0F,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xF3, 0xF8, 0x3F, 0x3E, 0x78, 0x3C, 0x3F, 0x3F, 0x07,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xE0, 0xFC, 0x7C, 0x1F, 0x78, 0x3C, 0x3E, 0x1F, 0x07,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x7C, 0x7C, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x7C, 0x78, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xE0, 0x3C, 0x78, 0x00, 0x7C, 0x3C, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0x3F, 0xF8, 0x00, 0x7F, 0xBC, 0x3C, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0x3F, 0xF8, 0x00, 0x3F, 0xBF, 0xFC, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0xFF, 0x3F, 0xF8, 0x00, 0x1F, 0xBF, 0xFC, 0x0F, 0x03,
-      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0x3F, 0xF8, 0x00, 0x0F, 0xBF, 0xFC, 0x0F, 0x03,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
-      0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E,
-      0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-      0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
-      0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x80 };
-  #else
-    #define START_BMPWIDTH      56
-    #define START_BMPHEIGHT     19
-    #define START_BMPBYTEWIDTH  7
-    #define START_BMPBYTES      133 // START_BMPWIDTH * START_BMPHEIGHT / 8
-
-    const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
-      0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF,
-      0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
-      0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F,
-      0x83, 0xCF, 0x00, 0x00, 0x0C, 0x30, 0x3F,
-      0x87, 0xFF, 0x80, 0x00, 0x0C, 0x30, 0x1F,
-      0x86, 0x79, 0x80, 0x00, 0x0C, 0x00, 0x0F,
-      0x8C, 0x30, 0xC7, 0x83, 0x8C, 0x30, 0xE7,
-      0x8C, 0x30, 0xCF, 0xC7, 0xCC, 0x31, 0xF3,
-      0x8C, 0x30, 0xDC, 0xEC, 0xEC, 0x33, 0xB9,
-      0x8C, 0x30, 0xD8, 0x6C, 0x6C, 0x33, 0x19,
-      0x8C, 0x30, 0xD0, 0x6C, 0x0C, 0x33, 0x19,
-      0x8C, 0x30, 0xD8, 0x6C, 0x0C, 0x33, 0x19,
-      0x8C, 0x30, 0xDC, 0x6C, 0x0E, 0x3B, 0x19,
-      0x8C, 0x30, 0xCF, 0x7C, 0x07, 0x9F, 0x19,
-      0x8C, 0x30, 0xC7, 0x7C, 0x03, 0x8F, 0x19,
-      0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
-      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
-      0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8 };
-  #endif
-#endif
-
-// Here comes a compile-time operation to match the extruder symbols
-// on the info screen to the set number of extruders in configuration.h
-//
-// When only one extruder is selected, the "1" on the symbol will not
-// be displayed.
-
-#if HAS_TEMP_BED
-  #if HOTENDS == 1
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-  #elif HOTENDS == 2
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-  #else
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
-    };
-  #endif // Extruders
-#else
-  #if HOTENDS == 1
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-  #elif HOTENDS == 2
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-  #else
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-
-    #define STATUS_SCREENWIDTH     115 //Width in pixels
-    #define STATUS_SCREENHEIGHT     19 //Height in pixels
-    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
-    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
-      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
-      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
-      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
-      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
-      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
-      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
-      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
-      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
-      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
-    };
-  #endif // Extruders
-#endif // HAS_TEMP_BED

Marlin/dogm_font_data_HD44780_C.h

@@ -1,194 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: HD44780_C v1.2
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 8 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 8
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t HD44780_C_5x7[2522] U8G_SECTION(".progmem.HD44780_C_5x7") = {
-  0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 255, 7,
-  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
-  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
-  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
-  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
-  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
-  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
-  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
-  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
-  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
-  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
-  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
-  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
-  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
-  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
-  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
-  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
-  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
-  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
-  5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 3, 7, 7,
-  6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
-  32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
-  128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
-  6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
-  112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
-  136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
-  6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
-  112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
-  136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
-  3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
-  7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
-  0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
-  168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
-  5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
-  136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
-  8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
-  0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
-  64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
-  5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
-  136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
-  5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
-  0, 0, 248, 16, 32, 64, 248, 5, 5, 5, 6, 0, 2, 184, 168, 168,
-  168, 184, 5, 5, 5, 6, 0, 2, 184, 136, 184, 160, 184, 5, 5, 5,
-  6, 0, 2, 184, 160, 184, 136, 184, 5, 6, 6, 6, 0, 1, 8, 40,
-  72, 248, 64, 32, 5, 5, 5, 6, 0, 0, 56, 112, 224, 136, 240, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5,
-  7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240, 5, 7, 7, 6,
-  0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 80,
-  0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112,
-  168, 168, 168, 5, 7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8,
-  6, 0, 0, 80, 32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0,
-  0, 120, 40, 40, 40, 40, 168, 72, 5, 7, 7, 6, 0, 0, 248, 136,
-  136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136, 80, 32,
-  64, 128, 5, 7, 7, 6, 0, 0, 32, 112, 168, 168, 168, 112, 32, 5,
-  7, 7, 6, 0, 0, 136, 136, 136, 120, 8, 8, 8, 5, 7, 7, 6,
-  0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 7, 7, 6, 0, 0, 192,
-  64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
-  168, 168, 200, 5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112,
-  5, 7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7,
-  6, 0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0,
-  24, 96, 128, 240, 136, 136, 112, 4, 5, 5, 6, 0, 0, 224, 144, 224,
-  144, 224, 5, 5, 5, 6, 0, 0, 248, 136, 128, 128, 128, 5, 7, 7,
-  6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6, 0, 0,
-  168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48, 8, 240,
-  5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7, 6, 0,
-  0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0, 144, 160,
-  192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72, 5, 5,
-  5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0, 0, 136,
-  136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5,
-  5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 5, 5, 6, 0, 0,
-  136, 136, 120, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168, 168, 168, 248,
-  5, 5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0,
-  0, 136, 136, 200, 168, 200, 4, 5, 5, 6, 0, 0, 128, 128, 224, 144,
-  224, 5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6,
-  0, 0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120,
-  40, 72, 5, 5, 5, 6, 0, 1, 32, 72, 144, 72, 32, 5, 5, 5,
-  6, 0, 1, 32, 144, 72, 144, 32, 5, 3, 3, 6, 0, 0, 72, 144,
-  216, 5, 3, 3, 6, 0, 4, 216, 72, 144, 5, 7, 7, 6, 0, 0,
-  144, 208, 176, 144, 56, 40, 56, 5, 7, 7, 6, 0, 0, 32, 0, 32,
-  64, 128, 136, 112, 5, 7, 7, 6, 0, 0, 24, 32, 32, 112, 32, 32,
-  192, 5, 7, 7, 6, 0, 0, 32, 80, 64, 240, 64, 64, 120, 1, 2,
-  2, 6, 2, 0, 128, 128, 1, 4, 4, 6, 2, 0, 128, 128, 128, 128,
-  3, 5, 5, 6, 1, 0, 160, 160, 160, 0, 224, 3, 5, 5, 6, 1,
-  0, 160, 160, 160, 0, 160, 5, 7, 7, 6, 0, 0, 160, 0, 232, 16,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 216, 112, 32, 112, 216, 5, 7,
-  7, 6, 0, 0, 160, 64, 168, 16, 32, 64, 128, 3, 6, 6, 6, 1,
-  1, 224, 64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 1, 248, 80, 80,
-  80, 80, 248, 5, 7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32,
-  5, 7, 7, 6, 0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 7, 7,
-  6, 0, 0, 128, 144, 176, 248, 176, 144, 128, 5, 7, 7, 6, 0, 0,
-  8, 72, 104, 248, 104, 72, 8, 5, 7, 7, 6, 0, 0, 128, 136, 168,
-  248, 168, 136, 128, 5, 7, 7, 6, 0, 0, 128, 224, 136, 16, 32, 64,
-  128, 2, 2, 2, 6, 2, 2, 192, 192, 5, 8, 8, 6, 0, 255, 120,
-  40, 40, 40, 72, 136, 248, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136,
-  136, 136, 136, 248, 8, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168,
-  168, 248, 8, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248, 136, 5,
-  7, 7, 6, 0, 255, 32, 32, 112, 168, 168, 112, 32, 5, 6, 6, 6,
-  0, 255, 136, 136, 136, 136, 248, 8, 5, 6, 6, 6, 0, 255, 168, 168,
-  168, 168, 248, 8, 2, 2, 2, 6, 2, 6, 64, 128, 3, 1, 1, 6,
-  1, 7, 160, 5, 2, 2, 6, 0, 6, 72, 176, 5, 8, 8, 6, 0,
-  0, 16, 32, 0, 112, 136, 248, 128, 112, 5, 6, 6, 6, 0, 255, 112,
-  128, 136, 112, 32, 96, 3, 7, 7, 6, 1, 0, 160, 0, 160, 160, 160,
-  32, 192, 5, 6, 6, 6, 0, 1, 32, 112, 112, 112, 248, 32, 5, 5,
-  5, 6, 0, 1, 80, 0, 136, 0, 80, 5, 5, 5, 6, 0, 1, 112,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8,
-  8, 5, 7, 7, 6, 0, 0, 136, 144, 184, 72, 184, 8, 56, 5, 7,
-  7, 6, 0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0,
-  0, 192, 64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 136,
-  248, 136, 248, 136, 248, 136, 4, 5, 5, 6, 0, 2, 192, 0, 48, 0,
-  96, 5, 8, 8, 6, 0, 0, 64, 160, 224, 168, 8, 40, 120, 32, 5,
-  8, 8, 6, 0, 0, 64, 112, 64, 120, 64, 112, 64, 224, 5, 8, 8,
-  6, 0, 0, 32, 112, 32, 248, 32, 112, 32, 112, 5, 7, 7, 6, 0,
-  0, 104, 0, 232, 0, 104, 16, 56, 5, 8, 8, 6, 0, 0, 16, 112,
-  16, 240, 16, 112, 16, 56, 5, 7, 7, 6, 0, 1, 32, 112, 32, 248,
-  32, 112, 32, 5, 8, 8, 6, 0, 0, 16, 144, 80, 48, 80, 144, 16,
-  56, 5, 8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5,
-  7, 7, 6, 0, 0, 120, 168, 168, 120, 40, 40, 40, 5, 8, 8, 6,
-  0, 0, 248, 248, 248, 248, 248, 248, 248, 248
-};

Marlin/dogm_font_data_HD44780_J.h

@@ -1,192 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: HD44780_J
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 6 h=10 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-2
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t HD44780_J_5x7[2492] U8G_SECTION(".progmem.HD44780_J_5x7") = {
-  0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 254, 7,
-  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
-  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
-  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
-  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
-  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
-  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
-  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
-  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
-  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
-  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
-  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
-  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
-  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
-  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
-  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
-  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
-  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
-  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
-  5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248, 32, 32, 3, 7, 7,
-  6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
-  32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
-  128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
-  6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
-  112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
-  136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
-  6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
-  112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
-  136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
-  3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
-  7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
-  0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
-  168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
-  5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
-  136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
-  8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
-  0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
-  64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
-  5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
-  136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
-  5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
-  0, 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64,
-  128, 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128,
-  128, 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 5,
-  5, 6, 0, 1, 32, 16, 248, 16, 32, 5, 5, 5, 6, 0, 1, 32,
-  64, 248, 64, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 3, 3, 3, 6, 0, 0,
-  224, 160, 224, 3, 4, 4, 6, 2, 3, 224, 128, 128, 128, 3, 4, 4,
-  6, 0, 0, 32, 32, 32, 224, 3, 3, 3, 6, 0, 0, 128, 64, 32,
-  2, 2, 2, 6, 1, 2, 192, 192, 5, 6, 6, 6, 0, 0, 248, 8,
-  248, 8, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 48, 32, 64, 4,
-  5, 5, 6, 0, 0, 16, 32, 96, 160, 32, 5, 5, 5, 6, 0, 0,
-  32, 248, 136, 8, 48, 5, 4, 4, 6, 0, 0, 248, 32, 32, 248, 5,
-  5, 5, 6, 0, 0, 16, 248, 48, 80, 144, 5, 5, 5, 6, 0, 0,
-  64, 248, 72, 80, 64, 5, 4, 4, 6, 0, 0, 112, 16, 16, 248, 4,
-  5, 5, 6, 0, 0, 240, 16, 240, 16, 240, 5, 4, 4, 6, 0, 0,
-  168, 168, 8, 48, 5, 1, 1, 6, 0, 3, 248, 5, 7, 7, 6, 0,
-  0, 248, 8, 40, 48, 32, 32, 64, 5, 7, 7, 6, 0, 0, 8, 16,
-  32, 96, 160, 32, 32, 5, 7, 7, 6, 0, 0, 32, 248, 136, 136, 8,
-  16, 32, 5, 6, 6, 6, 0, 0, 248, 32, 32, 32, 32, 248, 5, 7,
-  7, 6, 0, 0, 16, 248, 16, 48, 80, 144, 16, 5, 7, 7, 6, 0,
-  0, 64, 248, 72, 72, 72, 72, 144, 5, 7, 7, 6, 0, 0, 32, 248,
-  32, 248, 32, 32, 32, 5, 6, 6, 6, 0, 0, 120, 72, 136, 8, 16,
-  96, 5, 7, 7, 6, 0, 0, 64, 120, 144, 16, 16, 16, 32, 5, 6,
-  6, 6, 0, 0, 248, 8, 8, 8, 8, 248, 5, 7, 7, 6, 0, 0,
-  80, 248, 80, 80, 16, 32, 64, 5, 6, 6, 6, 0, 0, 192, 8, 200,
-  8, 16, 224, 5, 6, 6, 6, 0, 0, 248, 8, 16, 32, 80, 136, 5,
-  7, 7, 6, 0, 0, 64, 248, 72, 80, 64, 64, 56, 5, 6, 6, 6,
-  0, 0, 136, 136, 72, 8, 16, 96, 5, 6, 6, 6, 0, 0, 120, 72,
-  168, 24, 16, 96, 5, 7, 7, 6, 0, 0, 16, 224, 32, 248, 32, 32,
-  64, 5, 6, 6, 6, 0, 0, 168, 168, 168, 8, 16, 32, 5, 7, 7,
-  6, 0, 0, 112, 0, 248, 32, 32, 32, 64, 3, 7, 7, 6, 1, 0,
-  128, 128, 128, 192, 160, 128, 128, 5, 7, 7, 6, 0, 0, 32, 32, 248,
-  32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 112, 0, 0, 0, 0, 248,
-  5, 6, 6, 6, 0, 0, 248, 8, 80, 32, 80, 128, 5, 7, 7, 6,
-  0, 0, 32, 248, 16, 32, 112, 168, 32, 3, 7, 7, 6, 1, 0, 32,
-  32, 32, 32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 32, 16, 136, 136,
-  136, 136, 5, 7, 7, 6, 0, 0, 128, 128, 248, 128, 128, 128, 120, 5,
-  6, 6, 6, 0, 0, 248, 8, 8, 8, 16, 96, 5, 5, 5, 6, 0,
-  1, 64, 160, 16, 8, 8, 5, 7, 7, 6, 0, 0, 32, 248, 32, 32,
-  168, 168, 32, 5, 6, 6, 6, 0, 0, 248, 8, 8, 80, 32, 16, 4,
-  6, 6, 6, 1, 0, 224, 0, 224, 0, 224, 16, 5, 6, 6, 6, 0,
-  0, 32, 64, 128, 136, 248, 8, 5, 6, 6, 6, 0, 0, 8, 8, 80,
-  32, 80, 128, 5, 6, 6, 6, 0, 0, 248, 64, 248, 64, 64, 56, 5,
-  7, 7, 6, 0, 0, 64, 64, 248, 72, 80, 64, 64, 5, 7, 7, 6,
-  0, 0, 112, 16, 16, 16, 16, 16, 248, 5, 6, 6, 6, 0, 0, 248,
-  8, 248, 8, 8, 248, 5, 7, 7, 6, 0, 0, 112, 0, 248, 8, 8,
-  16, 32, 4, 7, 7, 6, 0, 0, 144, 144, 144, 144, 16, 32, 64, 5,
-  6, 6, 6, 0, 0, 32, 160, 160, 168, 168, 176, 5, 7, 7, 6, 0,
-  0, 128, 128, 128, 136, 144, 160, 192, 5, 6, 6, 6, 0, 0, 248, 136,
-  136, 136, 136, 248, 5, 6, 6, 6, 0, 0, 248, 136, 136, 8, 16, 32,
-  5, 6, 6, 6, 0, 0, 192, 0, 8, 8, 16, 224, 4, 3, 3, 6,
-  0, 4, 32, 144, 64, 3, 3, 3, 6, 0, 4, 224, 160, 224, 5, 5,
-  5, 6, 0, 1, 72, 168, 144, 144, 104, 5, 7, 7, 6, 0, 0, 80,
-  0, 112, 8, 120, 136, 120, 4, 8, 8, 6, 1, 255, 96, 144, 144, 224,
-  144, 144, 224, 128, 5, 5, 5, 6, 0, 0, 112, 128, 96, 136, 112, 5,
-  6, 6, 6, 0, 255, 136, 136, 152, 232, 136, 128, 5, 5, 5, 6, 0,
-  0, 120, 160, 144, 136, 112, 5, 7, 7, 6, 0, 254, 48, 72, 136, 136,
-  240, 128, 128, 5, 8, 8, 6, 0, 254, 120, 136, 136, 136, 120, 8, 8,
-  112, 5, 5, 5, 6, 0, 1, 56, 32, 32, 160, 64, 4, 3, 3, 6,
-  0, 3, 16, 208, 16, 4, 8, 8, 6, 0, 255, 16, 0, 48, 16, 16,
-  16, 144, 96, 3, 3, 3, 6, 0, 4, 160, 64, 160, 5, 7, 7, 6,
-  0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7, 6, 0, 0, 64,
-  64, 224, 64, 224, 64, 120, 5, 7, 7, 6, 0, 0, 112, 0, 176, 200,
-  136, 136, 136, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136, 112,
-  5, 7, 7, 6, 0, 255, 176, 200, 136, 136, 240, 128, 128, 5, 7, 7,
-  6, 0, 255, 104, 152, 136, 136, 120, 8, 8, 5, 6, 6, 6, 0, 0,
-  112, 136, 248, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88, 168, 208, 5,
-  5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6, 0, 0,
-  80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 248, 128, 64,
-  32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 248, 80, 80, 80, 152, 5,
-  7, 7, 6, 0, 0, 248, 0, 136, 80, 32, 80, 136, 5, 7, 7, 6,
-  0, 255, 136, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0, 8,
-  240, 32, 248, 32, 32, 5, 5, 5, 6, 0, 0, 248, 64, 120, 72, 136,
-  5, 5, 5, 6, 0, 0, 248, 168, 248, 136, 136, 5, 5, 5, 6, 0,
-  1, 32, 0, 248, 0, 32, 0, 0, 0, 6, 0, 0, 6, 10, 10, 6,
-  0, 254, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252
-};

Marlin/dogm_font_data_HD44780_W.h

@@ -1,226 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: HD44780_W
-  Copyright: A.Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t HD44780_W_5x7[3034] U8G_SECTION(".progmem.HD44780_W_5x7") = {
-  0, 6, 9, 0, 254, 7, 2, 79, 3, 222, 16, 255, 255, 8, 255, 7,
-  255, 4, 7, 7, 6, 0, 0, 16, 48, 112, 240, 112, 48, 16, 4, 7,
-  7, 6, 1, 0, 128, 192, 224, 240, 224, 192, 128, 5, 3, 3, 6, 0,
-  4, 216, 72, 144, 5, 3, 3, 6, 0, 4, 216, 144, 72, 5, 7, 7,
-  6, 0, 0, 32, 112, 248, 0, 32, 112, 248, 5, 7, 7, 6, 0, 0,
-  248, 112, 32, 0, 248, 112, 32, 5, 5, 5, 6, 0, 1, 112, 248, 248,
-  248, 112, 5, 7, 7, 6, 0, 0, 8, 8, 40, 72, 248, 64, 32, 5,
-  7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32, 5, 7, 7, 6,
-  0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 5, 5, 6, 0, 1, 32,
-  64, 248, 64, 32, 5, 5, 5, 6, 0, 1, 32, 16, 248, 16, 32, 5,
-  7, 7, 6, 0, 0, 16, 32, 64, 32, 16, 0, 248, 5, 7, 7, 6,
-  0, 0, 64, 32, 16, 32, 64, 0, 248, 5, 5, 5, 6, 0, 1, 32,
-  32, 112, 112, 248, 5, 5, 5, 6, 0, 0, 248, 112, 112, 32, 32, 0,
-  0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128,
-  0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, 0, 0,
-  80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, 120, 160,
-  112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, 64, 152,
-  24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, 2, 3,
-  3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, 64, 128,
-  128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, 32, 64,
-  128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, 5, 6,
-  0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, 64, 128,
-  5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, 192, 5,
-  5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0,
-  112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, 192, 64,
-  64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, 128, 128,
-  248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, 5, 7,
-  7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, 6, 0,
-  0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, 48, 64,
-  128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 32,
-  32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, 112, 5,
-  7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, 5, 6,
-  2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, 192, 0,
-  192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, 32, 16,
-  5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, 0, 128,
-  64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, 8, 16,
-  32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, 112, 5,
-  7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6,
-  0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0, 112,
-  136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, 136, 136,
-  136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 248,
-  5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, 7, 7,
-  6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, 0, 0,
-  136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, 16, 144,
-  96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, 5, 7,
-  7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, 6, 0,
-  0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136,
-  200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 136,
-  136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, 128, 5,
-  7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, 7, 6,
-  0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120,
-  128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, 32, 32,
-  32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 136, 112,
-  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, 7, 7,
-  6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, 0, 0,
-  136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136,
-  80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 64, 128,
-  248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, 5, 5,
-  5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, 0, 224,
-  32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, 136, 5,
-  1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, 5, 5,
-  5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 128,
-  128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, 128, 136,
-  112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, 5, 5,
-  5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, 0, 48,
-  72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, 136, 120,
-  8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, 136, 1,
-  7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, 8, 6,
-  1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, 0, 0,
-  128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, 64, 64,
-  64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, 168, 5,
-  5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, 0, 0,
-  112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, 240, 128,
-  128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, 5, 5,
-  6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
-  112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, 72, 48,
-  5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, 6, 0,
-  0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, 168, 168,
-  80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, 6, 6,
-  0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, 248, 16,
-  32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32,
-  1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7,
-  6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 6, 6, 6, 0, 1,
-  8, 40, 72, 248, 64, 32, 5, 7, 7, 6, 0, 0, 32, 80, 136, 136,
-  136, 136, 248, 5, 7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240,
-  5, 8, 8, 6, 0, 255, 120, 40, 40, 40, 72, 136, 248, 136, 5, 7,
-  7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5, 7, 7, 6, 0,
-  0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 136, 136,
-  152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80, 32, 136, 152, 168,
-  168, 200, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168, 72,
-  5, 7, 7, 6, 0, 0, 248, 136, 136, 136, 136, 136, 136, 5, 7, 7,
-  6, 0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 8, 8, 6, 0, 255,
-  136, 136, 136, 136, 136, 136, 248, 8, 5, 7, 7, 6, 0, 0, 136, 136,
-  136, 120, 8, 8, 8, 5, 7, 7, 6, 0, 0, 168, 168, 168, 168, 168,
-  168, 248, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168, 168, 248, 8,
-  5, 7, 7, 6, 0, 0, 192, 64, 64, 112, 72, 72, 112, 5, 7, 7,
-  6, 0, 0, 136, 136, 136, 200, 168, 168, 200, 5, 7, 7, 6, 0, 0,
-  112, 136, 40, 80, 8, 136, 112, 5, 5, 5, 6, 0, 0, 64, 160, 144,
-  144, 104, 5, 7, 7, 6, 0, 0, 32, 48, 40, 40, 32, 224, 224, 5,
-  7, 7, 6, 0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 5, 5, 6,
-  0, 0, 248, 80, 80, 80, 152, 5, 7, 7, 6, 0, 0, 248, 128, 64,
-  32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 120, 144, 144, 144, 96, 5,
-  7, 7, 6, 0, 0, 48, 40, 56, 40, 200, 216, 24, 5, 6, 6, 6,
-  0, 0, 8, 112, 160, 32, 32, 16, 5, 6, 6, 6, 0, 1, 32, 112,
-  112, 112, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136,
-  112, 5, 5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6,
-  0, 0, 48, 72, 32, 80, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88,
-  168, 208, 5, 6, 6, 6, 0, 0, 80, 248, 248, 248, 112, 32, 5, 5,
-  5, 6, 0, 0, 112, 128, 96, 136, 112, 5, 7, 7, 6, 0, 0, 112,
-  136, 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 216, 216, 216, 216,
-  216, 216, 216, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
-  5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7,
-  6, 0, 0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0,
-  136, 112, 80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248,
-  32, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5,
-  8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5, 7, 7,
-  6, 0, 0, 24, 32, 32, 112, 32, 32, 192, 5, 7, 7, 6, 0, 0,
-  248, 136, 184, 184, 184, 136, 248, 5, 7, 7, 6, 0, 0, 112, 8, 120,
-  136, 120, 0, 248, 5, 5, 5, 6, 0, 1, 40, 80, 160, 80, 40, 5,
-  7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6,
-  0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0, 248,
-  136, 168, 136, 152, 168, 248, 2, 3, 3, 6, 2, 4, 64, 128, 192, 4,
-  5, 5, 6, 0, 3, 96, 144, 144, 144, 96, 5, 7, 7, 6, 0, 0,
-  32, 32, 248, 32, 32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32,
-  64, 240, 3, 5, 5, 6, 0, 3, 224, 32, 224, 32, 224, 5, 8, 8,
-  6, 0, 0, 224, 144, 224, 128, 144, 184, 144, 24, 5, 8, 8, 6, 0,
-  255, 136, 136, 136, 136, 152, 232, 128, 128, 5, 7, 7, 6, 0, 0, 120,
-  152, 152, 120, 24, 24, 24, 2, 2, 2, 6, 2, 2, 192, 192, 5, 5,
-  5, 6, 0, 0, 80, 136, 168, 168, 80, 3, 5, 5, 6, 0, 3, 64,
-  192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 112, 0,
-  248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5, 7, 7, 6,
-  0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6, 0, 0, 136,
-  144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192, 64, 192, 72,
-  216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32, 64, 128, 136,
-  112, 5, 8, 8, 6, 0, 0, 64, 32, 32, 80, 136, 248, 136, 136, 5,
-  8, 8, 6, 0, 0, 16, 32, 32, 80, 136, 248, 136, 136, 5, 8, 8,
-  6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0,
-  0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 80,
-  0, 32, 80, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 32, 80, 32,
-  112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96, 160, 184, 224,
-  160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136, 112, 32, 96,
-  5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128, 248, 5, 8,
-  8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5, 8, 8, 6,
-  0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0,
-  80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0, 128, 64, 0,
-  224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, 0, 224, 64,
-  64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224, 64, 64, 64,
-  224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 7,
-  7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8, 8, 6, 0,
-  0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6, 0, 0, 64,
-  32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 112,
-  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
-  136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 136, 136, 136,
-  112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136, 136, 112, 5,
-  5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 7, 7, 6, 0, 0,
-  112, 32, 112, 168, 112, 32, 112, 5, 8, 8, 6, 0, 0, 64, 32, 136,
-  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 136, 136,
-  136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136, 136, 136,
-  112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136, 136, 136, 112, 5,
-  8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 32, 5, 8, 8,
-  6, 0, 0, 192, 64, 112, 72, 72, 112, 64, 224, 5, 7, 7, 6, 0,
-  0, 48, 72, 72, 112, 72, 72, 176, 5, 8, 8, 6, 0, 0, 64, 32,
-  0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112,
-  8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 8, 120,
-  136, 120, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 8, 120, 136, 120,
-  5, 7, 7, 6, 0, 0, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8,
-  6, 0, 0, 32, 80, 32, 112, 8, 120, 136, 120, 5, 6, 6, 6, 0,
-  0, 208, 40, 120, 160, 168, 80, 5, 6, 6, 6, 0, 255, 112, 128, 136,
-  112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128,
-  112, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 128, 112, 5,
-  8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 128, 112, 5, 7, 7,
-  6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 3, 8, 8, 6, 1, 0,
-  128, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
-  0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 64,
-  192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 64, 192, 64, 64,
-  224, 5, 7, 7, 6, 0, 0, 160, 64, 160, 16, 120, 136, 112, 5, 8,
-  8, 6, 0, 0, 104, 144, 0, 176, 200, 136, 136, 136, 5, 8, 8, 6,
-  0, 0, 64, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
-  16, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
-  0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136,
-  112, 5, 5, 5, 6, 0, 1, 32, 0, 248, 0, 32, 5, 7, 7, 6,
-  0, 0, 16, 32, 112, 168, 112, 32, 64, 5, 8, 8, 6, 0, 0, 64,
-  32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 16, 32, 0,
-  136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136,
-  136, 152, 104, 5, 7, 7, 6, 0, 0, 80, 0, 136, 136, 136, 152, 104,
-  5, 9, 9, 6, 0, 255, 16, 32, 0, 136, 136, 136, 248, 8, 112, 4,
-  7, 7, 6, 1, 0, 192, 64, 96, 80, 96, 64, 224, 5, 8, 8, 6,
-  0, 255, 80, 0, 136, 136, 136, 248, 8, 112
-};

Marlin/dogm_font_data_ISO10646_1.h

@@ -1,198 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: ISO10646-1
-  Copyright: A.Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_1_5x7[2592] U8G_SECTION(".progmem.ISO10646_1_5x7") = {
-  0, 6, 9, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 8, 255, 7,
-  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 136, 136, 136, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
-  168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
-  7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
-  0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
-  136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
-  5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
-  6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
-  128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
-  16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
-  136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
-  7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
-  0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
-  136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
-  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
-  7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
-  0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
-  32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
-  136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
-  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
-  6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128,
-  224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
-  1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
-  80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
-  64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
-  0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
-  128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
-  120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
-  0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
-  136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
-  136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
-  8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
-  6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
-  192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
-  168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
-  6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
-  136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
-  5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
-  0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
-  64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
-  5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
-  136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
-  6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
-  0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
-  64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
-  3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
-  6, 0, 2, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
-  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
-  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
-  0, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 5, 7,
-  7, 6, 0, 0, 32, 112, 168, 160, 168, 112, 32, 5, 7, 7, 6, 0,
-  0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0, 136, 112,
-  80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 32, 248, 32, 248, 32,
-  1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5, 8, 8,
-  6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 3, 1, 1, 6, 1,
-  7, 160, 5, 7, 7, 6, 0, 0, 248, 136, 184, 184, 184, 136, 248, 5,
-  7, 7, 6, 0, 1, 112, 8, 120, 136, 120, 0, 248, 5, 5, 5, 6,
-  0, 1, 40, 80, 160, 80, 40, 5, 3, 3, 6, 0, 1, 248, 8, 8,
-  2, 2, 2, 6, 2, 6, 64, 128, 5, 7, 7, 6, 0, 0, 248, 136,
-  168, 136, 152, 168, 248, 5, 1, 1, 6, 0, 6, 248, 4, 4, 4, 6,
-  0, 3, 96, 144, 144, 96, 5, 7, 7, 6, 0, 0, 32, 32, 248, 32,
-  32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32, 64, 240, 3, 5,
-  5, 6, 0, 3, 224, 32, 224, 32, 224, 2, 2, 2, 6, 2, 6, 64,
-  128, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 152, 232, 128, 128, 5,
-  7, 7, 6, 0, 0, 120, 152, 152, 120, 24, 24, 24, 2, 2, 2, 6,
-  2, 2, 192, 192, 2, 2, 2, 6, 2, 255, 64, 128, 3, 5, 5, 6,
-  0, 3, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 1, 112, 136, 136,
-  136, 112, 0, 248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5,
-  7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6,
-  0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192,
-  64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32,
-  64, 128, 136, 112, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248,
-  136, 136, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 136, 136,
-  5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8,
-  8, 6, 0, 0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6,
-  0, 0, 80, 0, 112, 136, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0,
-  32, 80, 32, 112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96,
-  160, 184, 224, 160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136,
-  112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128,
-  248, 5, 8, 8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5,
-  8, 8, 6, 0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7,
-  6, 0, 0, 80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0,
-  128, 64, 0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
-  0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224,
-  64, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64,
-  224, 5, 7, 7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8,
-  8, 6, 0, 0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6,
-  0, 0, 64, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
-  16, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
-  0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
-  136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136,
-  136, 112, 5, 5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 8, 8,
-  6, 0, 255, 16, 112, 168, 168, 168, 168, 112, 64, 5, 8, 8, 6, 0,
-  0, 64, 32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16,
-  32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0,
-  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136,
-  136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32,
-  32, 5, 9, 9, 6, 0, 255, 192, 64, 112, 72, 72, 112, 64, 64, 224,
-  4, 8, 8, 6, 1, 255, 96, 144, 144, 160, 144, 144, 224, 128, 5, 8,
-  8, 6, 0, 0, 64, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6,
-  0, 0, 16, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0,
-  32, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 104, 144,
-  0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 80, 0, 112, 8,
-  120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 32, 112, 8, 120, 136,
-  120, 5, 6, 6, 6, 0, 0, 208, 40, 120, 160, 168, 80, 5, 6, 6,
-  6, 0, 255, 112, 128, 136, 112, 32, 96, 5, 8, 8, 6, 0, 0, 64,
-  32, 0, 112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 16, 32, 0,
-  112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
-  248, 128, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112,
-  3, 8, 8, 6, 1, 0, 128, 64, 0, 64, 192, 64, 64, 224, 3, 8,
-  8, 6, 1, 0, 32, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6,
-  1, 0, 64, 160, 0, 64, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0,
-  160, 0, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 160, 64, 160,
-  16, 120, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 176, 200, 136,
-  136, 136, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 136, 136, 112,
-  5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 136, 136, 112, 5, 8,
-  8, 6, 0, 0, 32, 80, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6,
-  0, 0, 104, 144, 0, 112, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0,
-  80, 0, 112, 136, 136, 136, 112, 5, 5, 5, 6, 0, 1, 32, 0, 248,
-  0, 32, 5, 7, 7, 6, 0, 255, 16, 112, 168, 168, 168, 112, 64, 5,
-  8, 8, 6, 0, 0, 64, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8,
-  6, 0, 0, 16, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0,
-  0, 32, 80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 80,
-  0, 136, 136, 136, 152, 104, 5, 9, 9, 6, 0, 255, 16, 32, 0, 136,
-  136, 136, 248, 8, 112, 4, 7, 7, 6, 1, 255, 192, 64, 96, 80, 96,
-  64, 224, 5, 8, 8, 6, 0, 255, 80, 0, 136, 136, 136, 120, 8, 112
-};

Marlin/dogm_font_data_ISO10646_1_PL.h

@@ -1,184 +0,0 @@
-/*
-  Fontname: ISO10646-1-PL
-  Copyright: A.Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-2
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_1_PL_5x7[2732] U8G_FONT_SECTION(".progmem.ISO10646_1_PL_5x7") = {
-  0,6,9,0,254,7,1,146,3,33,32,255,255,8,254,7,
-  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
-  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
-  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
-  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
-  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
-  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
-  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
-  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
-  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
-  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
-  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
-  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
-  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
-  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
-  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
-  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
-  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
-  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
-  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
-  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
-  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
-  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
-  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
-  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
-  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
-  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
-  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
-  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
-  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
-  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
-  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
-  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
-  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
-  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
-  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
-  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
-  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
-  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
-  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
-  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
-  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
-  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
-  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
-  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
-  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
-  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
-  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
-  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
-  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
-  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
-  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
-  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
-  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
-  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
-  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
-  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
-  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
-  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
-  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
-  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
-  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
-  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
-  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
-  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
-  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
-  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
-  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
-  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
-  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
-  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
-  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
-  6,0,2,104,144,0,0,0,6,0,0,5,9,9,6,0,
-  254,112,136,136,248,136,136,136,16,32,5,7,7,6,0,254,
-  112,8,120,136,120,16,32,5,8,8,6,0,0,16,32,112,
-  136,128,128,136,112,5,7,7,6,0,0,16,32,112,128,128,
-  136,112,5,9,9,6,0,254,248,128,128,240,128,128,248,8,
-  16,5,7,7,6,0,254,112,136,248,128,112,16,32,5,7,
-  7,6,0,0,128,144,160,192,128,128,248,5,7,7,6,0,
-  0,96,40,48,96,160,32,112,5,8,8,6,0,0,16,168,
-  136,200,168,152,136,136,5,8,8,6,0,0,8,16,0,176,
-  200,136,136,136,5,8,8,6,0,0,16,32,112,136,136,136,
-  136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,112,
-  5,8,8,6,0,0,16,120,128,128,112,8,8,240,5,8,
-  8,6,0,0,16,32,0,112,128,112,8,240,5,8,8,6,
-  0,0,32,248,8,16,32,64,128,248,5,8,8,6,0,0,
-  16,32,0,248,16,32,64,248,5,7,7,6,0,0,248,8,
-  16,248,64,128,248,5,8,8,6,0,0,48,48,0,248,16,
-  32,64,248,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
-  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,1,7,7,
-  6,2,0,128,0,128,128,128,128,128,5,7,7,6,0,0,
-  32,112,168,160,168,112,32,5,7,7,6,0,0,48,64,64,
-  224,64,80,168,5,5,5,6,0,0,136,112,80,112,136,5,
-  7,7,6,0,0,136,80,32,248,32,248,32,1,7,7,6,
-  2,0,128,128,128,0,128,128,128,5,8,8,6,0,0,48,
-  72,32,80,80,32,144,96,3,1,1,6,1,7,160,5,7,
-  7,6,0,0,248,136,184,184,184,136,248,5,7,7,6,0,
-  1,112,8,120,136,120,0,248,5,5,5,6,0,1,40,80,
-  160,80,40,5,3,3,6,0,1,248,8,8,2,2,2,6,
-  2,6,64,128,5,7,7,6,0,0,248,136,168,136,152,168,
-  248,5,1,1,6,0,6,248,4,4,4,6,0,3,96,144,
-  144,96,5,7,7,6,0,0,32,32,248,32,32,0,248,4,
-  5,5,6,0,3,96,144,32,64,240,3,5,5,6,0,3,
-  224,32,224,32,224,2,2,2,6,2,6,64,128,5,8,8,
-  6,0,255,136,136,136,136,152,232,128,128,5,7,7,6,0,
-  0,120,152,152,120,24,24,24,2,2,2,6,2,2,192,192,
-  2,2,2,6,2,255,64,128,3,5,5,6,0,3,64,192,
-  64,64,224,5,7,7,6,0,1,112,136,136,136,112,0,248,
-  5,5,5,6,0,1,160,80,40,80,160,5,7,7,6,0,
-  0,136,144,168,88,184,8,8,5,7,7,6,0,0,136,144,
-  184,72,152,32,56,5,8,8,6,0,0,192,64,192,72,216,
-  56,8,8,5,7,7,6,0,0,32,0,32,64,128,136,112,
-  5,8,8,6,0,0,64,32,0,112,136,248,136,136,5,8,
-  8,6,0,0,16,32,0,112,136,248,136,136,5,8,8,6,
-  0,0,32,80,0,112,136,248,136,136,5,8,8,6,0,0,
-  104,144,0,112,136,248,136,136,5,8,8,6,0,0,80,0,
-  112,136,136,248,136,136,5,8,8,6,0,0,32,80,32,112,
-  136,248,136,136,5,7,7,6,0,0,56,96,160,184,224,160,
-  184,5,8,8,6,0,255,112,136,128,128,136,112,32,96,5,
-  8,8,6,0,0,64,32,0,248,128,240,128,248,5,8,8,
-  6,0,0,8,16,0,248,128,240,128,248,5,8,8,6,0,
-  0,32,80,0,248,128,240,128,248,5,7,7,6,0,0,80,
-  0,248,128,240,128,248,3,8,8,6,1,0,128,64,0,224,
-  64,64,64,224,3,8,8,6,1,0,32,64,0,224,64,64,
-  64,224,3,8,8,6,1,0,64,160,0,224,64,64,64,224,
-  3,7,7,6,1,0,160,0,224,64,64,64,224,5,7,7,
-  6,0,0,112,72,72,232,72,72,112,5,8,8,6,0,0,
-  104,144,0,136,200,168,152,136,5,8,8,6,0,0,64,32,
-  112,136,136,136,136,112,5,8,8,6,0,0,16,32,112,136,
-  136,136,136,112,5,8,8,6,0,0,32,80,0,112,136,136,
-  136,112,5,8,8,6,0,0,104,144,0,112,136,136,136,112,
-  5,8,8,6,0,0,80,0,112,136,136,136,136,112,5,5,
-  5,6,0,1,136,80,32,80,136,5,8,8,6,0,255,16,
-  112,168,168,168,168,112,64,5,8,8,6,0,0,64,32,136,
-  136,136,136,136,112,5,8,8,6,0,0,16,32,136,136,136,
-  136,136,112,5,8,8,6,0,0,32,80,0,136,136,136,136,
-  112,5,8,8,6,0,0,80,0,136,136,136,136,136,112,5,
-  8,8,6,0,0,16,32,136,80,32,32,32,32,5,9,9,
-  6,0,255,192,64,112,72,72,112,64,64,224,4,8,8,6,
-  1,255,96,144,144,160,144,144,224,128,5,8,8,6,0,0,
-  64,32,0,112,8,120,136,120,5,8,8,6,0,0,16,32,
-  0,112,8,120,136,120,5,8,8,6,0,0,32,80,0,112,
-  8,120,136,120,5,8,8,6,0,0,104,144,0,112,8,120,
-  136,120,5,7,7,6,0,0,80,0,112,8,120,136,120,5,
-  8,8,6,0,0,32,80,32,112,8,120,136,120,5,6,6,
-  6,0,0,208,40,120,160,168,80,5,6,6,6,0,255,112,
-  128,136,112,32,96,5,8,8,6,0,0,64,32,0,112,136,
-  248,128,112,5,8,8,6,0,0,16,32,0,112,136,248,128,
-  112,5,8,8,6,0,0,32,80,0,112,136,248,128,112,5,
-  7,7,6,0,0,80,0,112,136,248,128,112,3,8,8,6,
-  1,0,128,64,0,64,192,64,64,224,3,8,8,6,1,0,
-  32,64,0,64,192,64,64,224,3,8,8,6,1,0,64,160,
-  0,64,192,64,64,224,3,7,7,6,1,0,160,0,64,192,
-  64,64,224,5,7,7,6,0,0,160,64,160,16,120,136,112,
-  5,8,8,6,0,0,104,144,0,176,200,136,136,136,5,8,
-  8,6,0,0,64,32,0,112,136,136,136,112,5,8,8,6,
-  0,0,16,32,0,112,136,136,136,112,5,8,8,6,0,0,
-  32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
-  0,112,136,136,136,112,5,7,7,6,0,0,80,0,112,136,
-  136,136,112,5,5,5,6,0,1,32,0,248,0,32,5,7,
-  7,6,0,255,16,112,168,168,168,112,64,5,8,8,6,0,
-  0,64,32,0,136,136,136,152,104,5,8,8,6,0,0,16,
-  32,0,136,136,136,152,104,5,8,8,6,0,0,32,80,0,
-  136,136,136,152,104,5,7,7,6,0,0,80,0,136,136,136,
-  152,104,5,9,9,6,0,255,16,32,0,136,136,136,248,8,
-  112,4,7,7,6,1,255,192,64,96,80,96,64,224,5,8,
-  8,6,0,255,80,0,136,136,136,120,8,112};

Marlin/dogm_font_data_ISO10646_1_tr.h

@@ -1,197 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/*
-  Fontname: ISO10646-1-tr
-  Copyright: public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = {
-  0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
-  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
-  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
-  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
-  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
-  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
-  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
-  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
-  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
-  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
-  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
-  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
-  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
-  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
-  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
-  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
-  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
-  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
-  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
-  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
-  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
-  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
-  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
-  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
-  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
-  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
-  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
-  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
-  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
-  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
-  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
-  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
-  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
-  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
-  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
-  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
-  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
-  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
-  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
-  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
-  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
-  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
-  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
-  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
-  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
-  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
-  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
-  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
-  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
-  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
-  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
-  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
-  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
-  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
-  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
-  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
-  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
-  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
-  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
-  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
-  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
-  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
-  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
-  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
-  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
-  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
-  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
-  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
-  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
-  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
-  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
-  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
-  6,0,2,104,144,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
-  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
-  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
-  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
-  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
-  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
-  0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,7,
-  7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,0,
-  0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,112,
-  80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,32,
-  1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,8,
-  6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,1,
-  7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,5,
-  7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,6,
-  0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,8,
-  2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,136,
-  168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,6,
-  0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,32,
-  32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,5,
-  5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,64,
-  128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,5,
-  7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,6,
-  2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,6,
-  0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,136,
-  136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,5,
-  7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,6,
-  0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,192,
-  64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,32,
-  64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,248,
-  136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,136,
-  5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,8,
-  8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,6,
-  0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,0,
-  32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,96,
-  160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,136,
-  112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,128,
-  248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,5,
-  8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,7,
-  6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,0,
-  128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,64,
-  0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,224,
-  64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,64,
-  224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,112,
-  5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,8,
-  8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,6,
-  0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,0,
-  32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
-  0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,136,
-  136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,5,
-  8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,8,
-  6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,0,
-  0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,32,
-  80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,136,
-  136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,128,
-  128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,32,
-  96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,5,
-  8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,8,
-  6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,0,
-  0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,104,
-  144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,112,
-  8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,120,
-  136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,7,
-  7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,0,
-  0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,16,
-  32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,0,
-  112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,248,
-  128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,224,
-  3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,8,
-  8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,6,
-  1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,80,
-  32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,0,
-  176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,136,
-  136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,
-  112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,
-  8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,7,
-  6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,1,
-  32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,168,
-  112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,104,
-  5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,8,
-  8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,6,
-  0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,128,
-  128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,32,
-  96,5,8,8,6,0,255,80,0,136,136,136,120,8,112};

Marlin/dogm_font_data_ISO10646_5_Cyrillic.h

@@ -1,196 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: ISO10646_5_Cyrillic
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_5_Cyrillic_5x7[2560] U8G_SECTION(".progmem.ISO10646_5_Cyrillic_5x7") = {
-  0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
-  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
-  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
-  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
-  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
-  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
-  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
-  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
-  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
-  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
-  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
-  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
-  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
-  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
-  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
-  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
-  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
-  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
-  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
-  5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
-  0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
-  136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
-  5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
-  0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
-  128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
-  5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
-  0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
-  136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
-  136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
-  8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
-  0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
-  64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
-  168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
-  0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
-  240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
-  5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
-  112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
-  72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
-  6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
-  168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
-  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
-  248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
-  64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
-  7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
-  0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 8, 8, 6, 0, 0,
-  64, 248, 128, 128, 240, 128, 128, 248, 5, 8, 8, 6, 0, 0, 80, 248,
-  128, 128, 240, 128, 128, 248, 5, 7, 7, 6, 0, 0, 224, 64, 64, 112,
-  72, 72, 112, 5, 8, 8, 6, 0, 0, 16, 32, 248, 136, 128, 128, 128,
-  128, 5, 7, 7, 6, 0, 0, 48, 72, 128, 224, 128, 72, 48, 5, 7,
-  7, 6, 0, 0, 112, 136, 128, 112, 8, 136, 112, 3, 7, 7, 6, 1,
-  0, 224, 64, 64, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 160, 0,
-  224, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
-  16, 144, 96, 5, 7, 7, 6, 0, 0, 160, 160, 160, 184, 168, 168, 184,
-  5, 7, 7, 6, 0, 0, 160, 160, 160, 248, 168, 168, 184, 4, 7, 7,
-  6, 0, 0, 224, 64, 112, 80, 80, 80, 80, 5, 8, 8, 6, 0, 0,
-  16, 32, 136, 144, 160, 224, 144, 136, 5, 8, 8, 6, 0, 0, 64, 32,
-  136, 152, 168, 200, 136, 136, 5, 9, 9, 6, 0, 255, 80, 32, 136, 136,
-  136, 80, 32, 32, 32, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136,
-  136, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136,
-  5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 136, 136, 240, 5, 7, 7,
-  6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0,
-  248, 136, 128, 128, 128, 128, 128, 5, 8, 8, 6, 0, 255, 120, 40, 40,
-  40, 72, 136, 248, 136, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
-  128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5,
-  7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6,
-  0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80,
-  32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0, 0, 136, 144, 160,
-  192, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168,
-  72, 5, 7, 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7,
-  7, 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6, 0,
-  0, 112, 136, 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 136,
-  136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
-  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 128, 128, 128, 136, 112, 5,
-  7, 7, 6, 0, 0, 248, 32, 32, 32, 32, 32, 32, 5, 7, 7, 6,
-  0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 7, 7, 6, 0, 0, 32,
-  112, 168, 168, 168, 112, 32, 5, 7, 7, 6, 0, 0, 136, 136, 80, 32,
-  80, 136, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136, 136, 248,
-  8, 5, 7, 7, 6, 0, 0, 136, 136, 136, 152, 104, 8, 8, 5, 7,
-  7, 6, 0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 8, 8, 6, 0,
-  255, 168, 168, 168, 168, 168, 168, 248, 8, 5, 7, 7, 6, 0, 0, 192,
-  64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
-  168, 168, 200, 5, 7, 7, 6, 0, 0, 128, 128, 128, 240, 136, 136, 240,
-  5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112, 5, 7, 7,
-  6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6, 0, 0,
-  120, 136, 136, 120, 40, 72, 136, 5, 5, 5, 6, 0, 0, 112, 8, 120,
-  136, 120, 5, 7, 7, 6, 0, 0, 24, 96, 128, 240, 136, 136, 112, 4,
-  5, 5, 6, 0, 0, 224, 144, 224, 144, 224, 5, 5, 5, 6, 0, 0,
-  248, 136, 128, 128, 128, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248,
-  136, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6,
-  0, 0, 168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48,
-  8, 240, 5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7,
-  6, 0, 0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0,
-  144, 160, 192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72,
-  5, 5, 5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0,
-  0, 136, 136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 112, 136, 136, 136,
-  112, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5, 6, 6, 6,
-  0, 255, 240, 136, 136, 240, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
-  128, 136, 112, 5, 5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 6,
-  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0,
-  32, 112, 168, 168, 112, 32, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80,
-  136, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 8, 5, 5, 5,
-  6, 0, 0, 136, 136, 248, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168,
-  168, 168, 248, 5, 6, 6, 6, 0, 255, 168, 168, 168, 168, 248, 8, 5,
-  5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0, 0,
-  136, 136, 200, 168, 200, 3, 5, 5, 6, 1, 0, 128, 128, 192, 160, 192,
-  5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6, 0,
-  0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120, 40,
-  72, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128, 112, 5,
-  7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 9, 9, 6,
-  0, 255, 64, 224, 64, 64, 120, 72, 72, 72, 16, 5, 8, 8, 6, 0,
-  0, 16, 32, 0, 248, 136, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112,
-  136, 96, 136, 112, 5, 5, 5, 6, 0, 0, 112, 128, 112, 8, 240, 1,
-  7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 7, 7, 6,
-  1, 0, 160, 0, 64, 64, 64, 64, 64, 3, 8, 8, 6, 1, 255, 32,
-  0, 32, 32, 32, 32, 160, 64, 5, 5, 5, 6, 0, 0, 160, 160, 184,
-  168, 184, 5, 5, 5, 6, 0, 0, 160, 160, 248, 168, 184, 5, 6, 6,
-  6, 0, 0, 64, 224, 64, 120, 72, 72, 4, 8, 8, 6, 0, 0, 16,
-  32, 0, 144, 160, 192, 160, 144, 5, 8, 8, 6, 0, 0, 64, 32, 0,
-  136, 152, 168, 200, 136, 5, 9, 9, 6, 0, 255, 80, 32, 0, 136, 136,
-  136, 120, 8, 112, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 32
-};

Marlin/dogm_font_data_ISO10646_CN.h

@@ -1,293 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: ISO10646_CN
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w=11 h=11 x= 2 y=10 dx=12 dy= 0 ascent=10 len=22
-  Font Bounding box     w=12 h=11 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent =10 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_CN[4105] U8G_SECTION(".progmem.ISO10646_CN") = {
-  0, 12, 11, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 10, 255, 7,
-  255, 0, 0, 0, 6, 0, 10, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 0,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
-  168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
-  7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
-  0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
-  136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
-  5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
-  6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
-  128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
-  16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
-  136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
-  7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
-  0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
-  136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
-  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
-  7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
-  0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
-  32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
-  136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
-  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
-  6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 64, 128, 248, 3, 7, 7, 6, 0, 0, 224, 128, 128, 128, 128, 128,
-  224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
-  0, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
-  80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
-  64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
-  0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
-  128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
-  120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
-  0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
-  136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
-  136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
-  8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
-  6, 1, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
-  192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
-  168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
-  6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
-  136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
-  5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
-  0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
-  64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
-  5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
-  136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
-  6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
-  0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
-  64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
-  3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
-  6, 0, 3, 104, 144, 0, 0, 0, 6, 0, 10, 0, 0, 0, 12, 0,
-  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
-  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
-  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
-  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
-  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
-  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
-  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
-  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
-  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
-  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
-  12, 0, 10, 0, 0, 0, 12, 0, 10, 11, 11, 22, 12, 0, 255, 255,
-  224, 2, 0, 2, 0, 4, 0, 13, 0, 20, 128, 36, 64, 196, 32, 4,
-  0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 249, 0, 138, 0, 171,
-  224, 172, 64, 170, 64, 170, 64, 170, 64, 170, 128, 33, 0, 82, 128, 140,
-  96, 11, 11, 22, 12, 0, 255, 36, 0, 36, 0, 63, 128, 68, 0, 132,
-  0, 4, 0, 255, 224, 10, 0, 17, 0, 32, 128, 192, 96, 11, 11, 22,
-  12, 0, 255, 36, 0, 36, 0, 63, 192, 68, 0, 4, 0, 255, 224, 9,
-  0, 9, 0, 17, 32, 33, 32, 64, 224, 11, 11, 22, 12, 0, 255, 32,
-  0, 61, 224, 81, 32, 145, 32, 17, 32, 255, 32, 17, 32, 41, 32, 37,
-  224, 69, 32, 128, 0, 11, 11, 22, 12, 0, 255, 32, 128, 127, 192, 8,
-  64, 255, 224, 17, 0, 32, 128, 95, 64, 128, 32, 63, 128, 0, 0, 127,
-  192, 11, 11, 22, 12, 0, 255, 34, 64, 71, 224, 148, 128, 228, 128, 47,
-  224, 68, 128, 244, 128, 7, 224, 52, 128, 196, 128, 7, 224, 11, 11, 22,
-  12, 0, 255, 4, 128, 143, 224, 73, 0, 25, 0, 47, 192, 9, 0, 9,
-  0, 47, 192, 73, 0, 137, 0, 15, 224, 11, 11, 22, 12, 0, 255, 16,
-  0, 63, 128, 81, 0, 14, 0, 49, 128, 192, 96, 63, 128, 36, 128, 63,
-  128, 36, 128, 63, 128, 11, 11, 22, 12, 0, 255, 34, 128, 250, 64, 7,
-  224, 250, 128, 138, 128, 138, 128, 250, 128, 34, 128, 178, 128, 170, 160, 100,
-  224, 11, 11, 22, 12, 0, 255, 34, 32, 71, 64, 146, 128, 239, 224, 34,
-  0, 71, 192, 236, 64, 7, 192, 52, 64, 199, 192, 4, 64, 11, 11, 22,
-  12, 0, 255, 8, 0, 15, 192, 8, 0, 8, 0, 255, 224, 8, 0, 14,
-  0, 9, 128, 8, 64, 8, 0, 8, 0, 10, 11, 22, 12, 0, 255, 255,
-  128, 0, 128, 0, 128, 128, 128, 128, 128, 255, 128, 128, 0, 128, 0, 128,
-  64, 128, 64, 127, 192, 11, 11, 22, 12, 0, 255, 71, 192, 65, 0, 239,
-  224, 65, 0, 69, 0, 105, 96, 201, 32, 77, 96, 73, 32, 79, 224, 200,
-  32, 11, 11, 22, 12, 0, 255, 8, 0, 4, 0, 4, 0, 10, 0, 10,
-  0, 10, 0, 17, 0, 17, 0, 32, 128, 64, 64, 128, 32, 11, 11, 22,
-  12, 0, 255, 34, 64, 34, 0, 247, 224, 34, 0, 35, 224, 53, 32, 229,
-  32, 37, 64, 40, 128, 41, 64, 114, 32, 11, 10, 20, 12, 0, 0, 68,
-  64, 68, 64, 68, 64, 127, 192, 4, 0, 4, 0, 132, 32, 132, 32, 132,
-  32, 255, 224, 11, 11, 22, 12, 0, 255, 4, 0, 0, 0, 127, 192, 4,
-  0, 4, 0, 4, 0, 127, 192, 4, 0, 4, 0, 4, 0, 255, 224, 11,
-  11, 22, 12, 0, 255, 255, 224, 17, 0, 1, 192, 254, 0, 72, 128, 37,
-  0, 4, 0, 255, 224, 21, 0, 36, 128, 196, 96, 11, 11, 22, 12, 0,
-  255, 17, 0, 127, 192, 68, 64, 127, 192, 68, 64, 127, 192, 4, 0, 255,
-  224, 4, 0, 4, 0, 4, 0, 9, 11, 22, 12, 0, 255, 16, 0, 255,
-  128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128,
-  128, 255, 128, 11, 11, 22, 12, 0, 255, 113, 0, 1, 0, 3, 224, 249,
-  32, 33, 32, 65, 32, 81, 32, 137, 32, 250, 32, 2, 32, 4, 192, 11,
-  11, 22, 12, 0, 255, 127, 192, 17, 0, 17, 0, 17, 0, 17, 0, 255,
-  224, 17, 0, 17, 0, 33, 0, 33, 0, 65, 0, 11, 11, 22, 12, 0,
-  255, 33, 0, 34, 0, 244, 64, 87, 224, 80, 32, 87, 192, 148, 64, 84,
-  64, 36, 64, 87, 192, 148, 64, 11, 11, 22, 12, 0, 255, 17, 0, 10,
-  0, 127, 192, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 17, 0, 32,
-  128, 192, 96, 10, 11, 22, 12, 0, 255, 95, 192, 0, 64, 132, 64, 132,
-  64, 191, 64, 132, 64, 140, 64, 148, 64, 164, 64, 140, 64, 129, 192, 11,
-  11, 22, 12, 0, 255, 36, 0, 39, 192, 36, 0, 36, 0, 255, 224, 0,
-  0, 20, 64, 36, 128, 71, 0, 12, 0, 112, 0, 11, 11, 22, 12, 0,
-  255, 36, 128, 4, 128, 15, 192, 228, 128, 36, 128, 63, 224, 36, 128, 36,
-  128, 40, 128, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 8, 0, 8,
-  0, 255, 128, 136, 128, 136, 128, 255, 128, 136, 128, 136, 128, 255, 160, 136,
-  32, 7, 224, 11, 11, 22, 12, 0, 255, 39, 128, 36, 128, 244, 128, 36,
-  128, 116, 128, 108, 128, 164, 128, 36, 128, 36, 160, 40, 160, 48, 96, 10,
-  11, 22, 12, 0, 255, 255, 192, 128, 64, 128, 64, 158, 64, 146, 64, 146,
-  64, 158, 64, 128, 64, 128, 64, 255, 192, 128, 64, 11, 11, 22, 12, 0,
-  255, 127, 192, 68, 0, 95, 192, 80, 64, 95, 192, 80, 64, 95, 192, 66,
-  0, 74, 128, 82, 64, 166, 32, 11, 11, 22, 12, 0, 255, 4, 0, 7,
-  224, 4, 0, 127, 192, 64, 64, 64, 64, 64, 64, 127, 192, 0, 0, 82,
-  64, 137, 32, 11, 11, 22, 12, 0, 255, 71, 128, 36, 128, 4, 128, 4,
-  128, 232, 96, 32, 0, 47, 192, 36, 64, 34, 128, 49, 0, 38, 192, 11,
-  11, 22, 12, 0, 255, 127, 192, 74, 64, 127, 192, 4, 0, 255, 224, 4,
-  0, 63, 128, 32, 128, 36, 128, 36, 128, 255, 224, 11, 11, 22, 12, 0,
-  255, 34, 0, 79, 224, 72, 32, 79, 224, 200, 0, 79, 224, 74, 160, 90,
-  160, 111, 224, 74, 160, 72, 96, 11, 11, 22, 12, 0, 255, 243, 192, 36,
-  64, 42, 128, 241, 0, 34, 128, 101, 224, 114, 32, 165, 64, 32, 128, 35,
-  0, 44, 0, 11, 11, 22, 12, 0, 255, 4, 0, 255, 224, 128, 32, 0,
-  0, 255, 224, 4, 0, 36, 0, 39, 192, 36, 0, 84, 0, 143, 224, 11,
-  11, 22, 12, 0, 255, 115, 224, 16, 128, 81, 0, 35, 224, 250, 32, 42,
-  160, 34, 160, 34, 160, 32, 128, 33, 64, 98, 32, 11, 11, 22, 12, 0,
-  255, 34, 0, 247, 128, 34, 128, 54, 128, 226, 160, 37, 160, 36, 96, 104,
-  32, 0, 0, 82, 64, 137, 32, 11, 11, 22, 12, 0, 255, 115, 192, 66,
-  0, 66, 0, 123, 224, 74, 64, 74, 64, 122, 64, 74, 64, 66, 64, 68,
-  64, 136, 64, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 8, 0, 31,
-  192, 48, 64, 95, 192, 144, 64, 31, 192, 16, 64, 16, 64, 16, 192, 11,
-  11, 22, 12, 0, 255, 2, 0, 127, 224, 66, 0, 66, 0, 95, 192, 66,
-  0, 71, 0, 74, 128, 82, 64, 98, 32, 130, 0, 11, 11, 22, 12, 0,
-  255, 243, 192, 150, 64, 145, 128, 166, 96, 161, 0, 151, 192, 145, 0, 149,
-  0, 231, 224, 129, 0, 129, 0, 11, 11, 22, 12, 0, 255, 15, 128, 136,
-  128, 79, 128, 8, 128, 143, 128, 64, 0, 31, 192, 53, 64, 85, 64, 149,
-  64, 63, 224, 11, 11, 22, 12, 0, 255, 39, 224, 32, 128, 248, 128, 32,
-  128, 32, 128, 56, 128, 224, 128, 32, 128, 32, 128, 32, 128, 97, 128, 11,
-  11, 22, 12, 0, 255, 31, 224, 145, 0, 87, 192, 20, 64, 23, 192, 148,
-  64, 87, 192, 17, 0, 85, 64, 153, 32, 35, 0, 11, 11, 22, 12, 0,
-  255, 32, 128, 39, 224, 242, 64, 33, 128, 34, 64, 52, 32, 226, 64, 34,
-  64, 34, 64, 34, 64, 100, 64, 11, 11, 22, 12, 0, 255, 65, 0, 65,
-  0, 79, 224, 233, 32, 73, 32, 73, 32, 111, 224, 201, 32, 73, 32, 73,
-  32, 207, 224, 11, 11, 22, 12, 0, 255, 33, 0, 241, 0, 79, 224, 169,
-  32, 249, 32, 47, 224, 57, 32, 233, 32, 41, 32, 47, 224, 40, 32, 11,
-  11, 22, 12, 0, 255, 143, 224, 73, 32, 9, 32, 203, 160, 73, 32, 79,
-  224, 72, 32, 75, 160, 74, 160, 107, 160, 80, 224, 11, 11, 22, 12, 0,
-  255, 127, 192, 4, 0, 68, 64, 36, 64, 36, 128, 4, 0, 255, 224, 4,
-  0, 4, 0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 130, 0, 66,
-  0, 31, 224, 194, 0, 95, 192, 82, 64, 95, 192, 71, 0, 74, 128, 82,
-  64, 191, 224, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 72, 128, 127,
-  224, 72, 128, 79, 128, 64, 0, 95, 192, 72, 64, 71, 128, 152, 96, 11,
-  11, 22, 12, 0, 255, 1, 0, 239, 224, 161, 0, 164, 64, 175, 224, 164,
-  64, 175, 224, 169, 32, 233, 32, 2, 128, 12, 96, 11, 11, 22, 12, 0,
-  255, 20, 192, 246, 160, 188, 96, 167, 128, 168, 128, 191, 224, 169, 32, 239,
-  224, 9, 32, 15, 224, 9, 32, 11, 11, 22, 12, 0, 255, 127, 128, 64,
-  128, 66, 128, 98, 128, 84, 128, 72, 128, 72, 128, 84, 160, 98, 160, 64,
-  96, 128, 32, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 64, 32, 127,
-  224, 64, 0, 125, 224, 84, 32, 76, 160, 84, 96, 100, 160, 141, 96, 11,
-  11, 22, 12, 0, 255, 130, 0, 95, 224, 4, 0, 8, 64, 159, 224, 64,
-  32, 10, 128, 10, 128, 74, 160, 146, 160, 34, 96, 11, 11, 22, 12, 0,
-  255, 65, 0, 79, 224, 232, 32, 66, 128, 68, 64, 104, 32, 199, 192, 65,
-  0, 65, 0, 65, 0, 207, 224, 11, 11, 22, 12, 0, 255, 80, 32, 125,
-  32, 145, 32, 255, 32, 17, 32, 125, 32, 85, 32, 85, 32, 84, 32, 92,
-  32, 16, 224, 11, 11, 22, 12, 0, 255, 63, 128, 32, 128, 63, 128, 32,
-  128, 255, 224, 72, 0, 123, 192, 73, 64, 121, 64, 72, 128, 251, 96, 11,
-  11, 22, 12, 0, 255, 4, 0, 4, 0, 4, 0, 36, 128, 36, 64, 68,
-  64, 68, 32, 132, 32, 4, 0, 4, 0, 28, 0, 11, 11, 22, 12, 0,
-  255, 4, 0, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 10, 0, 17,
-  0, 17, 0, 32, 128, 192, 96, 9, 10, 20, 10, 0, 0, 136, 128, 73,
-  0, 8, 0, 255, 128, 0, 128, 0, 128, 127, 128, 0, 128, 0, 128, 255,
-  128, 11, 11, 22, 12, 0, 255, 33, 0, 18, 0, 255, 224, 0, 0, 120,
-  128, 74, 128, 122, 128, 74, 128, 122, 128, 72, 128, 89, 128, 11, 11, 22,
-  12, 0, 255, 39, 192, 0, 0, 0, 0, 239, 224, 33, 0, 34, 0, 36,
-  64, 47, 224, 32, 32, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 32,
-  128, 39, 0, 249, 0, 33, 192, 119, 0, 33, 0, 249, 224, 39, 0, 113,
-  32, 169, 32, 32, 224, 11, 11, 22, 12, 0, 255, 16, 64, 16, 64, 253,
-  224, 16, 64, 56, 192, 53, 64, 82, 64, 148, 64, 16, 64, 16, 64, 16,
-  192, 11, 11, 22, 12, 0, 255, 0, 64, 248, 64, 11, 224, 8, 64, 136,
-  64, 82, 64, 81, 64, 33, 64, 80, 64, 72, 64, 137, 192, 10, 11, 22,
-  12, 0, 255, 132, 0, 132, 64, 132, 128, 245, 0, 134, 0, 132, 0, 132,
-  0, 148, 0, 164, 64, 196, 64, 131, 192, 11, 11, 22, 12, 0, 255, 17,
-  32, 125, 0, 17, 0, 255, 224, 41, 0, 253, 64, 73, 64, 124, 128, 8,
-  160, 253, 96, 10, 32, 11, 11, 22, 12, 0, 255, 23, 192, 36, 64, 36,
-  64, 103, 192, 161, 0, 47, 224, 33, 0, 35, 128, 37, 64, 41, 32, 33,
-  0, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 16, 0, 39, 192, 32,
-  128, 97, 0, 175, 224, 33, 0, 33, 0, 33, 0, 35, 0, 11, 11, 22,
-  12, 0, 255, 36, 0, 47, 224, 180, 0, 164, 128, 164, 160, 170, 192, 42,
-  128, 40, 128, 41, 64, 50, 64, 36, 32, 11, 11, 22, 12, 0, 255, 127,
-  224, 128, 0, 63, 192, 32, 64, 63, 192, 16, 0, 31, 192, 16, 64, 40,
-  128, 71, 0, 56, 224, 11, 11, 22, 12, 0, 255, 127, 224, 64, 0, 64,
-  0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 128,
-  0, 11, 11, 22, 12, 0, 255, 255, 224, 4, 0, 127, 192, 68, 64, 127,
-  192, 68, 64, 127, 192, 68, 0, 36, 0, 24, 0, 231, 224, 11, 11, 22,
-  12, 0, 255, 17, 224, 253, 0, 69, 0, 41, 224, 253, 64, 17, 64, 125,
-  64, 17, 64, 85, 64, 146, 64, 52, 64, 11, 11, 22, 12, 0, 255, 33,
-  0, 95, 224, 64, 0, 207, 192, 64, 0, 79, 192, 64, 0, 79, 192, 72,
-  64, 79, 192, 72, 64, 11, 11, 22, 12, 0, 255, 4, 0, 127, 192, 64,
-  64, 127, 192, 64, 64, 127, 192, 64, 64, 127, 192, 4, 64, 82, 32, 191,
-  160, 11, 11, 22, 12, 0, 255, 127, 192, 68, 64, 127, 192, 68, 64, 127,
-  192, 4, 0, 27, 0, 224, 224, 17, 0, 17, 0, 97, 0, 11, 11, 22,
-  12, 0, 255, 255, 224, 4, 0, 8, 0, 127, 224, 73, 32, 79, 32, 73,
-  32, 79, 32, 73, 32, 73, 32, 127, 224, 11, 11, 22, 12, 0, 255, 253,
-  224, 86, 64, 121, 64, 56, 128, 85, 64, 146, 32, 255, 224, 4, 0, 39,
-  192, 36, 0, 255, 224, 11, 11, 22, 12, 0, 255, 251, 128, 82, 0, 123,
-  224, 18, 64, 250, 64, 20, 64, 63, 128, 32, 128, 63, 128, 32, 128, 63,
-  128, 11, 11, 22, 12, 0, 255, 31, 224, 32, 0, 39, 192, 100, 64, 167,
-  192, 32, 0, 47, 224, 40, 32, 39, 192, 33, 0, 35, 0, 11, 11, 22,
-  12, 0, 255, 243, 224, 130, 32, 130, 32, 250, 32, 130, 32, 130, 32, 138,
-  32, 178, 32, 194, 224, 2, 0, 2, 0, 11, 11, 22, 12, 0, 255, 36,
-  128, 70, 160, 149, 192, 228, 128, 39, 224, 68, 128, 245, 192, 6, 160, 52,
-  128, 196, 128, 7, 224, 11, 11, 22, 12, 0, 255, 39, 192, 65, 0, 135,
-  224, 224, 32, 34, 128, 69, 128, 242, 128, 15, 224, 48, 128, 193, 64, 2,
-  32, 11, 11, 22, 12, 0, 255, 2, 0, 2, 0, 34, 0, 35, 192, 34,
-  0, 34, 0, 34, 0, 34, 0, 34, 0, 34, 0, 255, 224, 9, 11, 22,
-  12, 0, 255, 8, 0, 8, 0, 255, 128, 136, 128, 136, 128, 136, 128, 255,
-  128, 136, 128, 136, 128, 136, 128, 255, 128, 11, 11, 22, 12, 0, 255, 33,
-  0, 83, 160, 65, 0, 247, 224, 81, 0, 83, 192, 86, 64, 83, 192, 90,
-  64, 83, 192, 66, 64, 11, 11, 22, 12, 0, 255, 127, 192, 4, 0, 4,
-  0, 4, 0, 255, 224, 10, 0, 10, 0, 18, 0, 34, 32, 66, 32, 129,
-  224, 11, 11, 22, 12, 0, 255, 17, 0, 33, 0, 47, 224, 97, 0, 163,
-  128, 35, 128, 37, 64, 37, 64, 41, 32, 33, 0, 33, 0, 11, 11, 22,
-  12, 0, 255, 247, 224, 148, 32, 244, 32, 151, 224, 148, 128, 244, 128, 151,
-  224, 148, 128, 244, 160, 150, 96, 4, 32, 11, 11, 22, 12, 0, 255, 123,
-  224, 148, 128, 4, 0, 127, 192, 4, 0, 255, 224, 1, 0, 255, 224, 33,
-  0, 17, 0, 7, 0, 11, 11, 22, 12, 0, 255, 33, 0, 71, 192, 145,
-  0, 47, 224, 96, 128, 175, 224, 32, 128, 36, 128, 34, 128, 32, 128, 35,
-  128, 11, 11, 22, 12, 0, 255, 39, 192, 36, 64, 247, 192, 46, 224, 42,
-  160, 62, 224, 225, 0, 47, 224, 35, 128, 37, 64, 105, 32, 11, 11, 22,
-  12, 0, 255, 20, 0, 39, 224, 42, 0, 98, 0, 163, 192, 34, 0, 34,
-  0, 35, 224, 34, 0, 34, 0, 34, 0
-};

Marlin/dogm_font_data_ISO10646_CZ.h

@@ -1,192 +0,0 @@
-/*
-  Fontname: ISO10646_CZ
-  Copyright: A. Hardtung, public domain
-  Modified for Czech accents by Petr Zahradnik, http://www.zahradniksebavi.cz
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_CZ[2832] U8G_SECTION(".progmem.ISO10646_CZ") = {
-  0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
-  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
-  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
-  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
-  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
-  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
-  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
-  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
-  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
-  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
-  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
-  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
-  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
-  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
-  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
-  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
-  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
-  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
-  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
-  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
-  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
-  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
-  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
-  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
-  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
-  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
-  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
-  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
-  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
-  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
-  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
-  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
-  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
-  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
-  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
-  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
-  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
-  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
-  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
-  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
-  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
-  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
-  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
-  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
-  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
-  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
-  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
-  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
-  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
-  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
-  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
-  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
-  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
-  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
-  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
-  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
-  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
-  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
-  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
-  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
-  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
-  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
-  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
-  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
-  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
-  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
-  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
-  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
-  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
-  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
-  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
-  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
-  6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0,
-  0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,8,
-  16,248,128,128,240,128,248,3,8,8,6,1,0,32,64,224,
-  64,64,64,64,224,5,8,8,6,0,0,16,32,112,136,136,
-  136,136,112,5,8,8,6,0,0,16,32,136,136,136,136,136,
-  112,5,8,8,6,0,0,16,32,136,136,80,32,32,32,5,
-  8,8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,
-  6,0,0,16,32,0,112,136,248,128,112,2,8,8,6,2,
-  0,64,128,0,128,128,128,128,128,5,8,8,6,0,0,16,
-  32,0,112,136,136,136,112,5,8,8,6,0,0,16,32,0,
-  136,136,136,152,104,5,9,9,6,0,255,16,32,0,136,136,
-  136,120,8,112,5,8,8,6,0,0,80,32,112,136,128,128,
-  136,112,5,8,8,6,0,0,80,32,0,112,128,128,136,112,
-  5,8,8,6,0,0,80,32,240,136,136,136,136,240,6,8,
-  8,6,0,0,4,20,24,112,144,144,144,112,5,8,8,6,
-  0,0,80,32,248,128,128,240,128,248,5,8,8,6,0,0,
-  80,32,0,112,136,248,128,112,5,8,8,6,0,0,80,32,
-  136,200,168,152,136,136,5,8,8,6,0,0,80,32,0,176,
-  200,136,136,136,5,8,8,6,0,0,80,32,240,136,240,160,
-  144,136,5,8,8,6,0,0,80,32,0,176,200,128,128,128,
-  5,8,8,6,0,0,80,32,120,128,128,112,8,240,5,8,
-  8,6,0,0,80,32,0,112,128,112,8,240,5,8,8,6,
-  0,0,80,32,248,32,32,32,32,32,6,8,8,6,0,0,
-  4,68,72,224,64,64,64,48,5,8,8,6,0,0,32,80,
-  168,136,136,136,136,112,5,8,8,6,0,0,32,80,32,136,
-  136,136,152,104,5,8,8,6,0,0,80,32,248,8,48,64,
-  128,248,5,8,8,6,0,0,80,32,0,248,16,32,64,248,
-  0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
-  0,0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,
-  7,7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,
-  0,0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,
-  112,80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,
-  32,1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,
-  8,6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,
-  1,7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,
-  5,7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,
-  6,0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,
-  8,2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,
-  136,168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,
-  6,0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,
-  32,32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,
-  5,5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,
-  64,128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,
-  5,7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,
-  6,2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,
-  6,0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,
-  136,136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,
-  5,7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,
-  6,0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,
-  192,64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,
-  32,64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,
-  248,136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,
-  136,5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,
-  8,8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,
-  6,0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,
-  0,32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,
-  96,160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,
-  136,112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,
-  128,248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,
-  5,8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,
-  7,6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,
-  0,128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,
-  64,0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,
-  224,64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,
-  64,224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,
-  112,5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,
-  8,8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,
-  6,0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,
-  0,32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,
-  144,0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,
-  136,136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,
-  5,8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,
-  8,6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,
-  0,0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,
-  32,80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,
-  136,136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,
-  128,128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,
-  32,96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,
-  5,8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,
-  8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,
-  0,0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,
-  104,144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,
-  112,8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,
-  120,136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,
-  7,7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,
-  0,0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,
-  16,32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,
-  0,112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,
-  248,128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,
-  224,3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,
-  8,8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,
-  6,1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,
-  80,32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,
-  0,176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,
-  136,136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,
-  136,112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,
-  5,8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,
-  7,6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,
-  1,32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,
-  168,112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,
-  104,5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,
-  8,8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,
-  6,0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,
-  128,128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,
-  32,96,5,8,8,6,0,255,80,0,136,136,136,120,8,112
-  };

Marlin/dogm_font_data_ISO10646_Greek.h

@@ -1,205 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/*
-  Fontname: ISO10646_4_Greek
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 9 x= 2 y= 6 dx= 6 dy= 0 ascent= 8 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_Greek_5x7[2715] U8G_SECTION(".progmem.ISO10646_Greek_5x7") = {
-  0,6,9,0,254,7,1,145,3,32,32,255,255,8,255,7,
-  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
-  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
-  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
-  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
-  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
-  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
-  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
-  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
-  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
-  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
-  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
-  0,0,112,136,152,168,200,136,112,3,7,7,6,1,0,64,
-  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
-  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
-  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
-  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
-  48,64,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
-  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
-  112,5,7,7,6,0,0,112,136,136,120,8,16,96,2,5,
-  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
-  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
-  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
-  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
-  8,16,32,0,32,5,6,6,6,0,0,112,136,8,104,168,
-  112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,7,
-  7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,0,
-  0,112,136,128,128,128,136,112,5,7,7,6,0,0,224,144,
-  136,136,136,144,224,5,7,7,6,0,0,248,128,128,240,128,
-  128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,5,
-  7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,6,
-  0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,128,
-  128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,16,
-  16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,136,
-  5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,7,
-  6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,0,
-  136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,136,
-  136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,128,
-  128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,7,
-  7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,0,
-  0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,32,
-  32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,136,
-  136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,5,
-  7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,6,
-  0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,136,
-  136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,32,
-  64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,224,
-  5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,1,
-  0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,80,
-  136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,64,
-  5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,0,
-  0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,128,
-  128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,120,
-  5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,0,
-  0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,136,
-  136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,136,
-  136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,8,
-  8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,6,
-  0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,192,
-  64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,168,
-  168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,6,
-  0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,136,
-  240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,5,
-  5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,0,
-  112,128,112,8,240,5,7,7,6,0,0,64,64,224,64,64,
-  72,48,5,5,5,6,0,0,136,136,136,152,104,5,5,5,
-  6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,136,
-  168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,6,
-  6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,0,
-  248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,64,
-  64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,3,
-  7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,6,
-  0,3,104,144,0,0,0,6,0,0,0,0,0,6,0,0,
-  0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
-  0,0,2,2,2,6,1,6,64,128,3,3,3,6,1,5,
-  32,64,160,5,8,8,6,0,0,64,160,80,80,136,248,136,
-  136,2,2,2,6,1,2,192,192,5,8,8,6,0,0,64,
-  128,248,128,240,128,128,248,5,8,8,6,0,0,64,128,136,
-  136,248,136,136,136,4,8,8,6,0,0,64,128,112,32,32,
-  32,32,112,0,0,0,6,0,0,5,8,8,6,0,0,64,
-  128,112,136,136,136,136,112,0,0,0,6,0,0,5,8,8,
-  6,0,0,64,128,8,136,112,32,32,32,5,8,8,6,0,
-  0,64,128,112,136,136,136,80,216,3,8,8,6,1,0,32,
-  64,160,0,64,64,64,32,5,7,7,6,0,0,32,80,136,
-  136,248,136,136,5,7,7,6,0,0,240,72,72,112,72,72,
-  240,5,7,7,6,0,0,248,128,128,128,128,128,128,5,6,
-  6,6,0,0,32,80,80,136,136,248,5,7,7,6,0,0,
-  248,128,128,240,128,128,248,5,7,7,6,0,0,248,8,16,
-  32,64,128,248,5,7,7,6,0,0,136,136,136,248,136,136,
-  136,5,7,7,6,0,0,112,136,136,168,136,136,112,3,7,
-  7,6,1,0,224,64,64,64,64,64,224,5,7,7,6,0,
-  0,136,144,160,192,160,144,136,5,7,7,6,0,0,32,80,
-  136,136,136,136,136,5,7,7,6,0,0,136,216,168,168,136,
-  136,136,5,7,7,6,0,0,136,200,200,168,152,152,136,5,
-  7,7,6,0,0,248,0,0,112,0,0,248,5,7,7,6,
-  0,0,112,136,136,136,136,136,112,5,7,7,6,0,0,248,
-  80,80,80,80,80,80,5,7,7,6,0,0,240,136,136,240,
-  128,128,128,0,0,0,6,0,0,5,7,7,6,0,0,248,
-  128,64,32,64,128,248,5,7,7,6,0,0,248,32,32,32,
-  32,32,32,5,7,7,6,0,0,136,136,80,32,32,32,32,
-  5,7,7,6,0,0,112,32,112,168,112,32,112,5,7,7,
-  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
-  168,168,168,168,112,32,32,5,6,6,6,0,0,112,136,136,
-  80,80,216,3,8,8,6,1,0,160,0,224,64,64,64,64,
-  224,5,8,8,6,0,0,80,0,136,136,136,80,32,32,5,
-  8,8,6,0,0,32,64,8,104,152,144,144,104,5,8,8,
-  6,0,0,32,64,0,112,136,224,136,112,5,9,9,6,0,
-  255,32,64,0,112,136,136,136,136,8,2,8,8,6,1,0,
-  64,128,0,128,128,128,128,64,5,8,8,6,0,0,16,32,
-  80,0,136,136,136,112,5,6,6,6,0,0,8,104,152,144,
-  144,104,4,6,6,6,0,255,96,144,240,144,224,128,5,6,
-  6,6,0,255,136,72,80,32,32,64,5,6,6,6,0,0,
-  48,64,112,136,136,112,5,5,5,6,0,0,112,136,224,136,
-  112,5,8,8,6,0,255,128,112,64,128,128,112,8,112,5,
-  6,6,6,0,255,184,200,136,136,136,8,5,5,5,6,0,
-  0,112,136,248,136,112,3,5,5,6,1,0,128,128,128,128,
-  96,4,5,5,6,0,0,144,160,192,160,144,5,6,6,6,
-  0,0,64,32,32,80,80,136,5,6,6,6,0,255,136,136,
-  136,216,168,128,5,5,5,6,0,0,136,136,80,96,32,5,
-  9,9,6,0,255,128,224,128,112,32,64,240,8,112,5,5,
-  5,6,0,0,112,136,136,136,112,5,5,5,6,0,0,248,
-  80,80,80,80,5,6,6,6,0,255,112,136,136,200,176,128,
-  5,7,7,6,0,255,48,64,128,64,48,8,112,5,5,5,
-  6,0,0,104,144,144,144,96,4,5,5,6,0,0,240,64,
-  64,64,48,5,5,5,6,0,0,136,136,144,144,224,5,7,
-  7,6,0,255,32,168,168,168,112,32,32,5,6,6,6,0,
-  255,136,80,32,32,80,136,5,6,6,6,0,255,168,168,168,
-  168,112,32,5,5,5,6,0,0,80,136,136,168,112,4,7,
-  7,6,0,0,160,0,64,64,64,64,48,5,7,7,6,0,
-  0,80,0,136,136,144,144,224,4,8,8,6,0,0,32,64,
-  0,96,144,144,144,96,5,8,8,6,0,0,32,64,0,136,
-  136,144,144,96,5,8,8,6,0,0,32,64,0,80,136,136,
-  168,112,5,7,7,6,0,255,144,160,192,160,144,136,16,5,
-  8,8,6,0,0,96,144,160,128,240,136,136,112,5,7,7,
-  6,0,0,112,80,56,144,144,144,96,5,6,6,6,0,0,
-  152,80,32,32,32,32,5,8,8,6,0,0,64,128,152,80,
-  32,32,32,32,5,8,8,6,0,0,80,0,152,80,32,32,
-  32,32,5,7,7,6,0,255,48,168,168,168,168,112,32,5,
-  5,5,6,0,0,248,80,80,80,88,5,6,6,6,0,255,
-  136,80,112,80,136,16,5,7,7,6,0,255,112,136,136,136,
-  112,32,112,5,6,6,6,0,255,112,136,136,112,32,112,5,
-  6,6,6,0,0,112,136,128,112,32,112,5,7,7,6,0,
-  255,8,8,112,128,112,16,96,5,6,6,6,0,0,248,128,
-  128,240,128,128,4,5,5,6,0,0,240,128,224,128,128,5,
-  6,6,6,0,0,248,0,0,112,0,248,4,5,5,6,0,
-  0,64,128,240,16,32,5,7,7,6,0,0,224,80,40,40,
-  8,8,16,5,7,7,6,0,0,192,32,80,40,8,8,8,
-  5,7,7,6,0,255,168,168,168,168,88,8,112,5,6,6,
-  6,0,255,168,168,168,88,8,112,5,6,6,6,0,0,104,
-  136,136,120,8,8,5,6,6,6,0,255,104,136,136,120,8,
-  8,4,8,8,6,0,255,128,224,144,144,144,144,32,192,5,
-  5,5,6,0,0,104,144,112,16,224,5,6,6,6,0,0,
-  96,144,16,96,136,112,4,6,6,6,0,0,96,144,16,96,
-  128,112,5,6,6,6,0,0,136,80,32,80,136,248,5,5,
-  5,6,0,0,136,80,32,80,112,5,6,6,6,0,0,120,
-  128,240,136,136,112,4,5,5,6,0,0,240,128,224,144,96,
-  3,6,6,6,1,0,64,224,64,64,64,64,3,6,6,6,
-  1,255,64,224,64,64,64,128,5,5,5,6,0,0,136,80,
-  112,80,136,5,6,6,6,0,255,112,136,136,240,128,112,4,
-  5,5,6,0,0,112,128,128,128,112,2,8,8,6,1,255,
-  64,0,192,64,64,64,64,128,5,7,7,6,0,0,112,136,
-  136,248,136,136,112,4,5,5,6,0,0,112,128,224,128,112,
-  4,5,5,6,0,0,224,16,112,16,224,5,7,7,6,0,
-  0,128,240,136,136,136,240,128,4,7,7,6,0,255,128,224,
-  144,144,144,224,128,5,6,6,6,0,0,112,136,128,128,136,
-  112,5,6,6,6,0,0,136,216,168,136,136,136,5,6,6,
-  6,0,255,136,216,168,136,136,128,5,8,8,6,0,255,112,
-  136,136,136,112,64,224,64,5,6,6,6,0,0,112,136,8,
-  8,136,112,5,6,6,6,0,0,112,136,160,128,136,112,5,
-  6,6,6,0,0,112,136,40,8,136,112};

Marlin/dogm_font_data_ISO10646_Kana.h

@@ -1,192 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: ISO10646_Kana
-  Copyright: A. Hardtung, public domain
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 5 h= 8 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-1
-  X Font      ascent = 7 descent=-1
-  Max Font    ascent = 8 descent=-1
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t ISO10646_Kana_5x7[2482] U8G_SECTION(".progmem.ISO10646_Kana_5x7") = {
-  0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
-  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
-  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
-  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
-  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
-  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
-  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
-  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
-  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
-  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
-  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
-  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
-  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
-  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
-  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
-  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
-  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
-  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
-  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
-  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
-  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
-  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
-  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
-  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
-  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
-  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
-  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
-  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
-  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
-  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
-  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
-  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
-  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
-  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
-  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
-  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
-  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
-  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
-  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
-  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
-  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
-  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
-  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
-  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
-  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
-  5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
-  0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
-  136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
-  5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
-  0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
-  128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
-  5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
-  0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
-  136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
-  136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
-  8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
-  0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
-  64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
-  168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
-  0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
-  240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
-  5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
-  112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
-  72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
-  6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
-  168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
-  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
-  248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
-  64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
-  7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
-  0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
-  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
-  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
-  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 3, 3, 6, 0, 1,
-  248, 0, 248, 4, 4, 4, 6, 0, 0, 240, 16, 96, 64, 5, 6, 6,
-  6, 0, 0, 248, 8, 40, 48, 32, 64, 3, 4, 4, 6, 1, 0, 32,
-  64, 192, 64, 4, 6, 6, 6, 0, 0, 16, 32, 96, 160, 32, 32, 4,
-  4, 4, 6, 0, 0, 32, 240, 144, 32, 5, 6, 6, 6, 0, 0, 32,
-  248, 136, 8, 16, 32, 3, 4, 4, 6, 1, 0, 224, 64, 64, 224, 5,
-  5, 5, 6, 0, 0, 248, 32, 32, 32, 248, 4, 4, 4, 6, 0, 0,
-  32, 240, 96, 160, 5, 6, 6, 6, 0, 0, 16, 248, 48, 80, 144, 16,
-  5, 6, 6, 6, 0, 0, 64, 248, 72, 72, 72, 144, 5, 8, 8, 6,
-  0, 0, 40, 0, 64, 248, 72, 72, 72, 144, 5, 6, 6, 6, 0, 0,
-  32, 248, 32, 248, 32, 32, 5, 8, 8, 6, 0, 0, 40, 0, 32, 248,
-  32, 248, 32, 32, 4, 5, 5, 6, 0, 0, 112, 144, 16, 32, 192, 5,
-  7, 7, 6, 0, 0, 40, 0, 112, 144, 16, 32, 192, 5, 6, 6, 6,
-  0, 0, 64, 120, 144, 16, 16, 32, 5, 8, 8, 6, 0, 0, 40, 0,
-  64, 120, 144, 16, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 8, 8,
-  248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 8, 248, 5, 6,
-  6, 6, 0, 0, 80, 248, 80, 16, 32, 64, 5, 8, 8, 6, 0, 0,
-  40, 0, 80, 248, 80, 16, 32, 64, 5, 5, 5, 6, 0, 0, 192, 8,
-  200, 16, 224, 5, 7, 7, 6, 0, 0, 40, 0, 192, 8, 200, 16, 224,
-  5, 5, 5, 6, 0, 0, 248, 16, 32, 80, 136, 5, 7, 7, 6, 0,
-  0, 40, 0, 248, 16, 32, 80, 136, 5, 6, 6, 6, 0, 0, 64, 248,
-  72, 80, 64, 56, 5, 8, 8, 6, 0, 0, 40, 0, 64, 248, 72, 80,
-  64, 56, 5, 5, 5, 6, 0, 0, 136, 136, 72, 16, 96, 5, 7, 7,
-  6, 0, 0, 40, 0, 136, 136, 72, 16, 96, 5, 5, 5, 6, 0, 0,
-  120, 72, 168, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 120, 72, 168,
-  16, 96, 5, 6, 6, 6, 0, 0, 16, 224, 32, 248, 32, 64, 5, 8,
-  8, 6, 0, 0, 40, 0, 16, 224, 32, 248, 32, 64, 5, 4, 4, 6,
-  0, 0, 168, 168, 8, 48, 5, 5, 5, 6, 0, 0, 168, 168, 8, 16,
-  32, 5, 7, 7, 6, 0, 0, 40, 0, 168, 168, 8, 16, 32, 5, 6,
-  6, 6, 0, 0, 112, 0, 248, 32, 32, 64, 5, 8, 8, 6, 0, 0,
-  40, 0, 112, 0, 248, 32, 32, 64, 3, 6, 6, 6, 1, 0, 128, 128,
-  192, 160, 128, 128, 4, 8, 8, 6, 1, 0, 80, 0, 128, 128, 192, 160,
-  128, 128, 5, 6, 6, 6, 0, 0, 32, 248, 32, 32, 64, 128, 5, 5,
-  5, 6, 0, 0, 112, 0, 0, 0, 248, 5, 5, 5, 6, 0, 0, 248,
-  8, 80, 32, 208, 5, 6, 6, 6, 0, 0, 32, 248, 16, 32, 112, 168,
-  3, 6, 6, 6, 1, 0, 32, 32, 32, 32, 64, 128, 5, 5, 5, 6,
-  0, 0, 16, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 40, 0, 16,
-  136, 136, 136, 136, 5, 8, 8, 6, 0, 0, 24, 24, 0, 16, 136, 136,
-  136, 136, 5, 6, 6, 6, 0, 0, 128, 128, 248, 128, 128, 120, 5, 7,
-  7, 6, 0, 0, 40, 128, 128, 248, 128, 128, 120, 5, 7, 7, 6, 0,
-  0, 24, 152, 128, 248, 128, 128, 120, 5, 5, 5, 6, 0, 0, 248, 8,
-  8, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 16, 96,
-  5, 8, 8, 6, 0, 0, 24, 24, 0, 248, 8, 8, 16, 96, 5, 4,
-  4, 6, 0, 1, 64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 40, 0,
-  64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 24, 24, 64, 160, 16, 8,
-  5, 6, 6, 6, 0, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6,
-  0, 0, 40, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6, 0, 0,
-  24, 24, 32, 248, 32, 168, 168, 32, 5, 5, 5, 6, 0, 0, 248, 8,
-  80, 32, 16, 4, 5, 5, 6, 1, 0, 224, 0, 224, 0, 240, 5, 5,
-  5, 6, 0, 0, 32, 64, 136, 248, 8, 5, 5, 5, 6, 0, 0, 8,
-  40, 16, 40, 192, 5, 5, 5, 6, 0, 0, 248, 64, 248, 64, 56, 5,
-  4, 4, 6, 0, 0, 64, 248, 80, 64, 5, 6, 6, 6, 0, 0, 64,
-  248, 72, 80, 64, 64, 4, 4, 4, 6, 0, 0, 96, 32, 32, 240, 5,
-  5, 5, 6, 0, 0, 112, 16, 16, 16, 248, 4, 5, 5, 6, 0, 0,
-  240, 16, 240, 16, 240, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 248,
-  5, 6, 6, 6, 0, 0, 112, 0, 248, 8, 16, 32, 4, 6, 6, 6,
-  0, 0, 144, 144, 144, 144, 16, 32, 5, 5, 5, 6, 0, 0, 32, 160,
-  168, 168, 176, 4, 5, 5, 6, 0, 0, 128, 128, 144, 160, 192, 5, 5,
-  5, 6, 0, 0, 248, 136, 136, 136, 248, 4, 4, 4, 6, 0, 0, 240,
-  144, 16, 32, 5, 5, 5, 6, 0, 0, 248, 136, 8, 16, 32, 5, 6,
-  6, 6, 0, 0, 16, 248, 80, 80, 248, 16, 5, 5, 5, 6, 0, 0,
-  248, 8, 48, 32, 248, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 48,
-  5, 5, 5, 6, 0, 0, 192, 8, 8, 16, 224, 5, 8, 8, 6, 0,
-  0, 40, 0, 32, 248, 136, 8, 16, 32, 4, 4, 4, 6, 0, 0, 64,
-  240, 80, 160, 4, 4, 4, 6, 0, 0, 64, 240, 32, 64, 5, 7, 7,
-  6, 0, 0, 40, 0, 248, 136, 8, 16, 96, 5, 8, 8, 6, 0, 0,
-  40, 0, 16, 248, 80, 80, 248, 16, 5, 7, 7, 6, 0, 0, 40, 0,
-  248, 8, 48, 32, 248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 248,
-  8, 48, 2, 2, 2, 6, 2, 2, 192, 192, 5, 1, 1, 6, 0, 2,
-  248, 5, 4, 4, 6, 0, 1, 128, 96, 16, 8, 5, 5, 5, 6, 0,
-  1, 40, 128, 96, 16, 8, 5, 6, 6, 6, 0, 0, 248, 8, 8, 8,
-  8, 8
-};

Marlin/dogm_font_data_Marlin_symbols.h

@@ -1,45 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
-  Fontname: Marlin_symbols
-  Copyright: Created with Fony 1.4.7
-  Capital A Height: 0, '1' Height: 0
-  Calculated Max Values w= 5 h=10 x= 0 y= 3 dx= 6 dy= 0 ascent= 8 len=10
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
-  Pure Font   ascent = 0 descent= 0
-  X Font      ascent = 0 descent= 0
-  Max Font    ascent = 8 descent=-2
-*/
-#include <U8glib.h>
-const u8g_fntpgm_uint8_t Marlin_symbols[140] U8G_SECTION(".progmem.Marlin_symbols") = {
-  0, 6, 9, 0, 254, 0, 0, 0, 0, 0, 1, 9, 0, 8, 254, 0,
-  0, 5, 8, 8, 6, 0, 0, 64, 240, 200, 136, 136, 152, 120, 16, 5,
-  8, 8, 6, 0, 0, 192, 248, 136, 136, 136, 136, 136, 248, 5, 5, 5,
-  6, 0, 1, 32, 48, 248, 48, 32, 5, 8, 8, 6, 0, 0, 32, 112,
-  248, 32, 32, 32, 32, 224, 5, 9, 9, 6, 0, 255, 32, 112, 168, 168,
-  184, 136, 136, 112, 32, 5, 9, 9, 6, 0, 255, 224, 128, 192, 176, 168,
-  40, 48, 40, 40, 5, 9, 9, 6, 0, 255, 248, 168, 136, 136, 136, 136,
-  136, 168, 248, 5, 10, 10, 6, 0, 254, 32, 80, 80, 80, 80, 136, 168,
-  168, 136, 112, 3, 3, 3, 6, 0, 3, 64, 160, 64
-};

Marlin/endstop_interrupts.h

@@ -1,206 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Endstop Interrupts
- *
- * Without endstop interrupts the endstop pins must be polled continually in
- * the stepper-ISR via endstops.update(), most of the time finding no change.
- * With this feature endstops.update() is called only when we know that at
- * least one endstop has changed state, saving valuable CPU cycles.
- *
- * This feature only works when all used endstop pins can generate either an
- * 'external interrupt' or a 'pin change interrupt'.
- *
- * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
- * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
- */
-
-#ifndef _ENDSTOP_INTERRUPTS_H_
-#define _ENDSTOP_INTERRUPTS_H_
-
-#include "macros.h"
-
-/**
- * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
- *
- * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
- * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
- * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
- */
-#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
-  #undef  digitalPinToPCICR
-  #define digitalPinToPCICR(p)    ( WITHIN(p, 10, 15) || \
-                                    WITHIN(p, 50, 53) || \
-                                    WITHIN(p, 62, 69) ? &PCICR : (uint8_t*)0 )
-  #undef  digitalPinToPCICRbit
-  #define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
-                                    WITHIN(p, 14, 15) ? 1 : \
-                                    WITHIN(p, 62, 69) ? 2 : \
-                                    0 )
-  #undef  digitalPinToPCMSK
-  #define digitalPinToPCMSK(p)    ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
-                                    WITHIN(p, 14, 15) ? &PCMSK1 : \
-                                    WITHIN(p, 62, 69) ? &PCMSK2 : \
-                                    (uint8_t *)0 )
-  #undef  digitalPinToPCMSKbit
-  #define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
-                                    (p) == 14 || (p) == 51 ? 2 : \
-                                    (p) == 15 || (p) == 52 ? 1 : \
-                                    (p) == 50 ? 3 : \
-                                    (p) == 53 ? 0 : \
-                                    WITHIN(p, 62, 69) ? ((p) - 62) : \
-                                    0 )
-#endif
-
-volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail.
-                            // Must be reset to 0 by the test function when finished.
-
-// Install Pin change interrupt for a pin. Can be called multiple times.
-void pciSetup(byte pin) {
-  SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
-  SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
-  SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
-}
-
-// This is what is really done inside the interrupts.
-FORCE_INLINE void endstop_ISR_worker( void ) {
-  e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
-}
-
-// Use one Routine to handle each group
-// One ISR for all EXT-Interrupts
-void endstop_ISR(void) { endstop_ISR_worker(); }
-
-// Handlers for pin change interrupts
-#ifdef PCINT0_vect
-  ISR(PCINT0_vect) { endstop_ISR_worker(); }
-#endif
-
-#ifdef PCINT1_vect
-  ISR(PCINT1_vect) { endstop_ISR_worker(); }
-#endif
-
-#ifdef PCINT2_vect
-  ISR(PCINT2_vect) { endstop_ISR_worker(); }
-#endif
-
-#ifdef PCINT3_vect
-  ISR(PCINT3_vect) { endstop_ISR_worker(); }
-#endif
-
-void setup_endstop_interrupts( void ) {
-
-  #if HAS_X_MAX
-    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
-      attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
-      pciSetup(X_MAX_PIN);                                                            // assign it
-    #endif
-  #endif
-
-  #if HAS_X_MIN
-    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
-      pciSetup(X_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Y_MAX
-    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable");
-      pciSetup(Y_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Y_MIN
-    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
-      pciSetup(Y_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z_MAX
-    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable");
-      pciSetup(Z_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z_MIN
-    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
-      pciSetup(Z_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z2_MAX
-    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable");
-      pciSetup(Z2_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z2_MIN
-    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable");
-      pciSetup(Z2_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z_MIN_PROBE_PIN
-    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
-      attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
-    #else
-      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
-      static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable");
-      pciSetup(Z_MIN_PROBE_PIN);
-    #endif
-  #endif
-
-  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
-}
-
-#endif // _ENDSTOP_INTERRUPTS_H_

Marlin/endstops.cpp

@@ -1,451 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * endstops.cpp - A singleton object to manage endstops
- */
-
-#include "Marlin.h"
-#include "cardreader.h"
-#include "endstops.h"
-#include "temperature.h"
-#include "stepper.h"
-#include "ultralcd.h"
-
-// TEST_ENDSTOP: test the old and the current status of an endstop
-#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits & old_endstop_bits, ENDSTOP))
-
-Endstops endstops;
-
-// public:
-
-bool Endstops::enabled, Endstops::enabled_globally; // Initialized by settings.load()
-volatile char Endstops::endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
-
-#if ENABLED(Z_DUAL_ENDSTOPS)
-  uint16_t
-#else
-  byte
-#endif
-    Endstops::current_endstop_bits = 0,
-    Endstops::old_endstop_bits = 0;
-
-#if HAS_BED_PROBE
-  volatile bool Endstops::z_probe_enabled = false;
-#endif
-
-/**
- * Class and Instance Methods
- */
-
-void Endstops::init() {
-
-  #if HAS_X_MIN
-    #if ENABLED(ENDSTOPPULLUP_XMIN)
-      SET_INPUT_PULLUP(X_MIN_PIN);
-    #else
-      SET_INPUT(X_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Y_MIN
-    #if ENABLED(ENDSTOPPULLUP_YMIN)
-      SET_INPUT_PULLUP(Y_MIN_PIN);
-    #else
-      SET_INPUT(Y_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z_MIN
-    #if ENABLED(ENDSTOPPULLUP_ZMIN)
-      SET_INPUT_PULLUP(Z_MIN_PIN);
-    #else
-      SET_INPUT(Z_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z2_MIN
-    #if ENABLED(ENDSTOPPULLUP_ZMIN)
-      SET_INPUT_PULLUP(Z2_MIN_PIN);
-    #else
-      SET_INPUT(Z2_MIN_PIN);
-    #endif
-  #endif
-
-  #if HAS_X_MAX
-    #if ENABLED(ENDSTOPPULLUP_XMAX)
-      SET_INPUT_PULLUP(X_MAX_PIN);
-    #else
-      SET_INPUT(X_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Y_MAX
-    #if ENABLED(ENDSTOPPULLUP_YMAX)
-      SET_INPUT_PULLUP(Y_MAX_PIN);
-    #else
-      SET_INPUT(Y_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z_MAX
-    #if ENABLED(ENDSTOPPULLUP_ZMAX)
-      SET_INPUT_PULLUP(Z_MAX_PIN);
-    #else
-      SET_INPUT(Z_MAX_PIN);
-    #endif
-  #endif
-
-  #if HAS_Z2_MAX
-    #if ENABLED(ENDSTOPPULLUP_ZMAX)
-      SET_INPUT_PULLUP(Z2_MAX_PIN);
-    #else
-      SET_INPUT(Z2_MAX_PIN);
-    #endif
-  #endif
-
-  #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-    #if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)
-      SET_INPUT_PULLUP(Z_MIN_PROBE_PIN);
-    #else
-      SET_INPUT(Z_MIN_PROBE_PIN);
-    #endif
-  #endif
-
-} // Endstops::init
-
-void Endstops::report_state() {
-  if (endstop_hit_bits) {
-    #if ENABLED(ULTRA_LCD)
-      char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
-      #define _SET_STOP_CHAR(A,C) (chr## A = C)
-    #else
-      #define _SET_STOP_CHAR(A,C) ;
-    #endif
-
-    #define _ENDSTOP_HIT_ECHO(A,C) do{ \
-      SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", stepper.triggered_position_mm(A ##_AXIS)); \
-      _SET_STOP_CHAR(A,C); }while(0)
-
-    #define _ENDSTOP_HIT_TEST(A,C) \
-      if (TEST(endstop_hit_bits, A ##_MIN) || TEST(endstop_hit_bits, A ##_MAX)) \
-        _ENDSTOP_HIT_ECHO(A,C)
-
-    #define ENDSTOP_HIT_TEST_X() _ENDSTOP_HIT_TEST(X,'X')
-    #define ENDSTOP_HIT_TEST_Y() _ENDSTOP_HIT_TEST(Y,'Y')
-    #define ENDSTOP_HIT_TEST_Z() _ENDSTOP_HIT_TEST(Z,'Z')
-
-    SERIAL_ECHO_START();
-    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
-    ENDSTOP_HIT_TEST_X();
-    ENDSTOP_HIT_TEST_Y();
-    ENDSTOP_HIT_TEST_Z();
-
-    #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-      #define P_AXIS Z_AXIS
-      if (TEST(endstop_hit_bits, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
-    #endif
-    SERIAL_EOL();
-
-    #if ENABLED(ULTRA_LCD)
-      lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
-    #endif
-
-    hit_on_purpose();
-
-    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
-      if (stepper.abort_on_endstop_hit) {
-        card.sdprinting = false;
-        card.closefile();
-        quickstop_stepper();
-        thermalManager.disable_all_heaters(); // switch off all heaters.
-      }
-    #endif
-  }
-} // Endstops::report_state
-
-void Endstops::M119() {
-  SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT);
-  #if HAS_X_MIN
-    SERIAL_PROTOCOLPGM(MSG_X_MIN);
-    SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_X_MAX
-    SERIAL_PROTOCOLPGM(MSG_X_MAX);
-    SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Y_MIN
-    SERIAL_PROTOCOLPGM(MSG_Y_MIN);
-    SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Y_MAX
-    SERIAL_PROTOCOLPGM(MSG_Y_MAX);
-    SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Z_MIN
-    SERIAL_PROTOCOLPGM(MSG_Z_MIN);
-    SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Z2_MIN
-    SERIAL_PROTOCOLPGM(MSG_Z2_MIN);
-    SERIAL_PROTOCOLLN(((READ(Z2_MIN_PIN)^Z2_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Z_MAX
-    SERIAL_PROTOCOLPGM(MSG_Z_MAX);
-    SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if HAS_Z2_MAX
-    SERIAL_PROTOCOLPGM(MSG_Z2_MAX);
-    SERIAL_PROTOCOLLN(((READ(Z2_MAX_PIN)^Z2_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-    SERIAL_PROTOCOLPGM(MSG_Z_PROBE);
-    SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-  #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-    SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
-    SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
-  #endif
-} // Endstops::M119
-
-#if ENABLED(Z_DUAL_ENDSTOPS)
-
-  // Pass the result of the endstop test
-  void Endstops::test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2) {
-    byte z_test = TEST_ENDSTOP(es1) | (TEST_ENDSTOP(es2) << 1); // bit 0 for Z, bit 1 for Z2
-    if (z_test && stepper.current_block->steps[Z_AXIS] > 0) {
-      SBI(endstop_hit_bits, Z_MIN);
-      if (!stepper.performing_homing || (z_test == 0x3))  //if not performing home or if both endstops were trigged during homing...
-        stepper.kill_current_block();
-    }
-  }
-
-#endif
-
-// Check endstops - Called from ISR!
-void Endstops::update() {
-
-  #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
-  #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
-  #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
-  #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX))
-
-  // UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
-  #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
-  // COPY_BIT: copy the value of SRC_BIT to DST_BIT in DST
-  #define COPY_BIT(DST, SRC_BIT, DST_BIT) SET_BIT(DST, DST_BIT, TEST(DST, SRC_BIT))
-
-  #define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
-      UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \
-      if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \
-        _ENDSTOP_HIT(AXIS, MINMAX); \
-        stepper.endstop_triggered(_AXIS(AXIS)); \
-      } \
-    } while(0)
-
-  #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
-    // If G38 command is active check Z_MIN_PROBE for ALL movement
-    if (G38_move) {
-      UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
-      if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
-        if      (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); }
-        else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); }
-        else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); }
-        G38_endstop_hit = true;
-      }
-    }
-  #endif
-
-  /**
-   * Define conditions for checking endstops
-   */
-
-  #if IS_CORE
-    #define S_(N) stepper.current_block->steps[CORE_AXIS_##N]
-    #define D_(N) stepper.motor_direction(CORE_AXIS_##N)
-  #endif
-
-  #if CORE_IS_XY || CORE_IS_XZ
-    /**
-     * Head direction in -X axis for CoreXY and CoreXZ bots.
-     *
-     * If steps differ, both axes are moving.
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below)
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X)
-     */
-    #if ENABLED(COREXY) || ENABLED(COREXZ)
-      #define X_CMP ==
-    #else
-      #define X_CMP !=
-    #endif
-    #define X_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) X_CMP D_(2)) )
-    #define X_AXIS_HEAD X_HEAD
-  #else
-    #define X_MOVE_TEST stepper.current_block->steps[X_AXIS] > 0
-    #define X_AXIS_HEAD X_AXIS
-  #endif
-
-  #if CORE_IS_XY || CORE_IS_YZ
-    /**
-     * Head direction in -Y axis for CoreXY / CoreYZ bots.
-     *
-     * If steps differ, both axes are moving
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y)
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z)
-     */
-    #if ENABLED(COREYX) || ENABLED(COREYZ)
-      #define Y_CMP ==
-    #else
-      #define Y_CMP !=
-    #endif
-    #define Y_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Y_CMP D_(2)) )
-    #define Y_AXIS_HEAD Y_HEAD
-  #else
-    #define Y_MOVE_TEST stepper.current_block->steps[Y_AXIS] > 0
-    #define Y_AXIS_HEAD Y_AXIS
-  #endif
-
-  #if CORE_IS_XZ || CORE_IS_YZ
-    /**
-     * Head direction in -Z axis for CoreXZ or CoreYZ bots.
-     *
-     * If steps differ, both axes are moving
-     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y, already handled above)
-     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z)
-     */
-    #if ENABLED(COREZX) || ENABLED(COREZY)
-      #define Z_CMP ==
-    #else
-      #define Z_CMP !=
-    #endif
-    #define Z_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Z_CMP D_(2)) )
-    #define Z_AXIS_HEAD Z_HEAD
-  #else
-    #define Z_MOVE_TEST stepper.current_block->steps[Z_AXIS] > 0
-    #define Z_AXIS_HEAD Z_AXIS
-  #endif
-
-  // With Dual X, endstops are only checked in the homing direction for the active extruder
-  #if ENABLED(DUAL_X_CARRIAGE)
-    #define E0_ACTIVE stepper.current_block->active_extruder == 0
-    #define X_MIN_TEST ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE))
-    #define X_MAX_TEST ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE))
-  #else
-    #define X_MIN_TEST true
-    #define X_MAX_TEST true
-  #endif
-
-  /**
-   * Check and update endstops according to conditions
-   */
-
-  if (X_MOVE_TEST) {
-    if (stepper.motor_direction(X_AXIS_HEAD)) {
-      if (X_MIN_TEST) { // -direction
-        #if HAS_X_MIN
-          UPDATE_ENDSTOP(X, MIN);
-        #endif
-      }
-    }
-    else if (X_MAX_TEST) { // +direction
-      #if HAS_X_MAX
-        UPDATE_ENDSTOP(X, MAX);
-      #endif
-    }
-  }
-
-  if (Y_MOVE_TEST) {
-    if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
-      #if HAS_Y_MIN
-        UPDATE_ENDSTOP(Y, MIN);
-      #endif
-    }
-    else { // +direction
-      #if HAS_Y_MAX
-        UPDATE_ENDSTOP(Y, MAX);
-      #endif
-    }
-  }
-
-  if (Z_MOVE_TEST) {
-    if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
-      #if HAS_Z_MIN
-        #if ENABLED(Z_DUAL_ENDSTOPS)
-
-          UPDATE_ENDSTOP_BIT(Z, MIN);
-          #if HAS_Z2_MIN
-            UPDATE_ENDSTOP_BIT(Z2, MIN);
-          #else
-            COPY_BIT(current_endstop_bits, Z_MIN, Z2_MIN);
-          #endif
-
-          test_dual_z_endstops(Z_MIN, Z2_MIN);
-
-        #else // !Z_DUAL_ENDSTOPS
-
-          #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
-            if (z_probe_enabled) UPDATE_ENDSTOP(Z, MIN);
-          #else
-            UPDATE_ENDSTOP(Z, MIN);
-          #endif
-
-        #endif // !Z_DUAL_ENDSTOPS
-
-      #endif // HAS_Z_MIN
-
-      // When closing the gap check the enabled probe
-      #if ENABLED(Z_MIN_PROBE_ENDSTOP)
-        if (z_probe_enabled) {
-          UPDATE_ENDSTOP(Z, MIN_PROBE);
-          if (TEST_ENDSTOP(Z_MIN_PROBE)) SBI(endstop_hit_bits, Z_MIN_PROBE);
-        }
-      #endif
-    }
-    else { // Z +direction. Gantry up, bed down.
-      #if HAS_Z_MAX
-
-        // Check both Z dual endstops
-        #if ENABLED(Z_DUAL_ENDSTOPS)
-
-          UPDATE_ENDSTOP_BIT(Z, MAX);
-          #if HAS_Z2_MAX
-            UPDATE_ENDSTOP_BIT(Z2, MAX);
-          #else
-            COPY_BIT(current_endstop_bits, Z_MAX, Z2_MAX);
-          #endif
-
-          test_dual_z_endstops(Z_MAX, Z2_MAX);
-
-        // If this pin is not hijacked for the bed probe
-        // then it belongs to the Z endstop
-        #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
-
-          UPDATE_ENDSTOP(Z, MAX);
-
-        #endif // !Z_MIN_PROBE_PIN...
-      #endif // Z_MAX_PIN
-    }
-  }
-
-  old_endstop_bits = current_endstop_bits;
-
-} // Endstops::update()

Marlin/endstops.h

@@ -1,102 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- *  endstops.h - manages endstops
- */
-
-#ifndef ENDSTOPS_H
-#define ENDSTOPS_H
-
-#include "enum.h"
-
-class Endstops {
-
-  public:
-
-    static bool enabled, enabled_globally;
-    static volatile char endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
-
-    #if ENABLED(Z_DUAL_ENDSTOPS)
-      static uint16_t
-    #else
-      static byte
-    #endif
-        current_endstop_bits, old_endstop_bits;
-
-    Endstops() {};
-
-    /**
-     * Initialize the endstop pins
-     */
-    void init();
-
-    /**
-     * Update the endstops bits from the pins
-     */
-    static void update();
-
-    /**
-     * Print an error message reporting the position when the endstops were last hit.
-     */
-    static void report_state(); //call from somewhere to create an serial error message with the locations the endstops where hit, in case they were triggered
-
-    /**
-     * Report endstop positions in response to M119
-     */
-    static void M119();
-
-    // Enable / disable endstop checking globally
-    static void enable_globally(bool onoff=true) { enabled_globally = enabled = onoff; }
-
-    // Enable / disable endstop checking
-    static void enable(bool onoff=true) { enabled = onoff; }
-
-    // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
-    static void not_homing() { enabled = enabled_globally; }
-
-    // Clear endstops (i.e., they were hit intentionally) to suppress the report
-    static void hit_on_purpose() { endstop_hit_bits = 0; }
-
-    // Enable / disable endstop z-probe checking
-    #if HAS_BED_PROBE
-      static volatile bool z_probe_enabled;
-      static void enable_z_probe(bool onoff=true) { z_probe_enabled = onoff; }
-    #endif
-
-  private:
-
-    #if ENABLED(Z_DUAL_ENDSTOPS)
-      static void test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2);
-    #endif
-};
-
-extern Endstops endstops;
-
-#if HAS_BED_PROBE
-  #define ENDSTOPS_ENABLED  (endstops.enabled || endstops.z_probe_enabled)
-#else
-  #define ENDSTOPS_ENABLED  endstops.enabled
-#endif
-
-
-#endif // ENDSTOPS_H

Marlin/enum.h

@@ -1,189 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef __ENUM_H__
-#define __ENUM_H__
-
-#include "MarlinConfig.h"
-
-/**
- * Axis indices as enumerated constants
- *
- * Special axis:
- *  - A_AXIS and B_AXIS are used by COREXY printers
- *  - X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship
- *    between X_AXIS and X Head movement, like CoreXY bots
- */
-enum AxisEnum {
-  NO_AXIS   = -1,
-  X_AXIS    = 0,
-  A_AXIS    = 0,
-  Y_AXIS    = 1,
-  B_AXIS    = 1,
-  Z_AXIS    = 2,
-  C_AXIS    = 2,
-  E_AXIS    = 3,
-  X_HEAD    = 4,
-  Y_HEAD    = 5,
-  Z_HEAD    = 6,
-  ALL_AXES  = 100
-};
-
-#define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++)
-#define LOOP_S_L_N(VAR, S, N) for (uint8_t VAR=S; VAR<N; VAR++)
-#define LOOP_LE_N(VAR, N) LOOP_S_LE_N(VAR, 0, N)
-#define LOOP_L_N(VAR, N) LOOP_S_L_N(VAR, 0, N)
-
-#define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS)
-#define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS)
-#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_AXIS)
-#define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N)
-
-typedef enum {
-  LINEARUNIT_MM,
-  LINEARUNIT_INCH
-} LinearUnit;
-
-typedef enum {
-  TEMPUNIT_C,
-  TEMPUNIT_K,
-  TEMPUNIT_F
-} TempUnit;
-
-/**
- * Debug flags
- * Not yet widely applied
- */
-enum DebugFlags {
-  DEBUG_NONE          = 0,
-  DEBUG_ECHO          = _BV(0), ///< Echo commands in order as they are processed
-  DEBUG_INFO          = _BV(1), ///< Print messages for code that has debug output
-  DEBUG_ERRORS        = _BV(2), ///< Not implemented
-  DEBUG_DRYRUN        = _BV(3), ///< Ignore temperature setting and E movement commands
-  DEBUG_COMMUNICATION = _BV(4), ///< Not implemented
-  DEBUG_LEVELING      = _BV(5), ///< Print detailed output for homing and leveling
-  DEBUG_MESH_ADJUST   = _BV(6), ///< UBL bed leveling
-  DEBUG_ALL           = 0xFF
-};
-
-enum EndstopEnum {
-  X_MIN,
-  Y_MIN,
-  Z_MIN,
-  Z_MIN_PROBE,
-  X_MAX,
-  Y_MAX,
-  Z_MAX,
-  Z2_MIN,
-  Z2_MAX
-};
-
-#if ENABLED(EMERGENCY_PARSER)
-  enum e_parser_state {
-    state_RESET,
-    state_N,
-    state_M,
-    state_M1,
-    state_M10,
-    state_M108,
-    state_M11,
-    state_M112,
-    state_M4,
-    state_M41,
-    state_M410,
-    state_IGNORE // to '\n'
-  };
-#endif
-
-#if ENABLED(ADVANCED_PAUSE_FEATURE)
-  enum AdvancedPauseMenuResponse {
-    ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
-    ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
-    ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
-  };
-
-  #if ENABLED(ULTIPANEL)
-    enum AdvancedPauseMessage {
-      ADVANCED_PAUSE_MESSAGE_INIT,
-      ADVANCED_PAUSE_MESSAGE_UNLOAD,
-      ADVANCED_PAUSE_MESSAGE_INSERT,
-      ADVANCED_PAUSE_MESSAGE_LOAD,
-      ADVANCED_PAUSE_MESSAGE_EXTRUDE,
-      ADVANCED_PAUSE_MESSAGE_OPTION,
-      ADVANCED_PAUSE_MESSAGE_RESUME,
-      ADVANCED_PAUSE_MESSAGE_STATUS,
-      ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
-      ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
-    };
-  #endif
-#endif
-
-/**
- * States for managing Marlin and host communication
- * Marlin sends messages if blocked or busy
- */
-#if ENABLED(HOST_KEEPALIVE_FEATURE)
-  enum MarlinBusyState {
-    NOT_BUSY,           // Not in a handler
-    IN_HANDLER,         // Processing a GCode
-    IN_PROCESS,         // Known to be blocking command input (as in G29)
-    PAUSED_FOR_USER,    // Blocking pending any input
-    PAUSED_FOR_INPUT    // Blocking pending text input (concept)
-  };
-#endif
-
-/**
- * SD Card
- */
-enum LsAction { LS_SerialPrint, LS_Count, LS_GetFilename };
-
-/**
- * Ultra LCD
- */
-enum LCDViewAction {
-  LCDVIEW_NONE,
-  LCDVIEW_REDRAW_NOW,
-  LCDVIEW_CALL_REDRAW_NEXT,
-  LCDVIEW_CLEAR_CALL_REDRAW,
-  LCDVIEW_CALL_NO_REDRAW
-};
-
-/**
- * Dual X Carriage modes. A Dual Nozzle can also do duplication.
- */
-#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
-  enum DualXMode {
-    DXC_FULL_CONTROL_MODE,  // DUAL_X_CARRIAGE only
-    DXC_AUTO_PARK_MODE,     // DUAL_X_CARRIAGE only
-    DXC_DUPLICATION_MODE
-  };
-#endif
-
-/**
- * Workspace planes only apply to G2/G3 moves
- * (and "canned cycles" - not a current feature)
- */
-#if ENABLED(CNC_WORKSPACE_PLANES)
-  enum WorkspacePlane { PLANE_XY, PLANE_ZX, PLANE_YZ };
-#endif
-
-#endif // __ENUM_H__

Marlin/example_configurations/AliExpress/CL-260/README.txt

@@ -1,15 +0,0 @@
-This is an example configuration for the CL-260 Ultimaker 2 clone.
-Change Z_MAX_POS to 300 for the CL-260MAX.
-
-(The printer is available on AliExpress; be aware that this is not a beginner's
-printer -- it needs tweaking and some parts replaced before being decent.)
-
-The printer comes with a quite old Marlin, the sources are available here:
-http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.
-
-The setting "works" for my printer and the extruder using my calibration value.
-You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...
-
-Have fun!
---
-tobi

Marlin/example_configurations/BQ/Hephestos_2/README.md

@@ -1,22 +0,0 @@
-# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
-This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin).
-
-NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.
-
-## Changelog
- * 2016/03/01 - Initial release
-
- * 2016/03/21 - Activated 4-point auto leveling by default
-                Updated miscellaneous z-probe values
-
- * 2016/06/21 - Disabled hot bed related options
-                Activated software endstops
-                SD printing now disables the heater when finished
-
- * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis
-                Increased the `DEFAULT_XYJERK`
-
- * 2016/12/13 - Configuration updated.
-
- * 2017/07/06 - Configuration updated to the latest Marlin version.
-                Added support for the official BQ heated bed kit.

Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h

@@ -1,103 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Custom Bitmap for splashscreen
- *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
- *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
- */
-#include <avr/pgmspace.h>
-
-#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  62
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
-
-const unsigned char custom_start_bmp[512] PROGMEM = {
-  0x00, 0x00, 0x00, 0x0F, 0xF0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x1F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x03, 0xC0, 0x0F, 0xF0, 0x07, 0x80, 0x00,
-  0x00, 0x07, 0xE0, 0x07, 0xE0, 0x0F, 0xC0, 0x00,
-  0x00, 0x0F, 0xF0, 0x03, 0xC0, 0x1F, 0xE0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x1F, 0xF8, 0x00, 0x00, 0x3F, 0xF0, 0x00,
-  0x00, 0x0F, 0xF0, 0x00, 0x00, 0x1F, 0xE0, 0x00,
-  0x00, 0x07, 0xE0, 0x00, 0x00, 0x0F, 0xC0, 0x00,
-  0x00, 0x03, 0xC0, 0x00, 0x00, 0x07, 0x80, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFC,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x1E, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0x3F, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0x7F, 0x80, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00,
-  0xFF, 0xC0, 0x00, 0x00, 0xF7, 0xC0, 0x1F, 0x80,
-  0xFF, 0xC0, 0x00, 0x00, 0xFF, 0xF0, 0x7F, 0xC0,
-  0x7F, 0x80, 0x00, 0x00, 0xFF, 0xF8, 0xFF, 0xE0,
-  0x3F, 0x00, 0x00, 0x00, 0xFC, 0xF8, 0xF0, 0xF8,
-  0x1E, 0x00, 0x00, 0x00, 0xF8, 0x7D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF0, 0x3D, 0xE0, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0xF8, 0x79, 0xF0, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0xFF, 0xF8, 0xFF, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x3F, 0xF0, 0x7F, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x0F, 0xE0, 0x3F, 0xF8,
-  0x00, 0x00, 0x00, 0x00, 0x03, 0x80, 0x0E, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
-};

Marlin/example_configurations/Cartesio/_Bootscreen.h

@@ -1,103 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Custom Bitmap for splashscreen
- *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
- *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
- */
-#include <avr/pgmspace.h>
-
-#define CUSTOM_BOOTSCREEN_TIMEOUT   2500
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  63
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
-
-const unsigned char custom_start_bmp[512] PROGMEM = {
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x3F, 0xFC, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x03, 0xFF, 0xFF, 0xC0, 0x00, 0x00,
-  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xF0, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00,
-  0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0x00,
-  0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x0F, 0x07, 0x87, 0xFF, 0xFF, 0xE0, 0x00,
-  0x00, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x00,
-  0x01, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x80,
-  0x03, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0x80,
-  0x07, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xC0,
-  0x07, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xE0,
-  0x0F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xE0,
-  0x0F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xF0,
-  0x1F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xF0,
-  0x1F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xF0,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xF1, 0xF8,
-  0x3F, 0x1F, 0x8F, 0xC7, 0xFF, 0xFF, 0xE1, 0xF8,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0x1F, 0x8F, 0xC7, 0xC0, 0x00, 0x01, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x7F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xFC,
-  0x3F, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x3F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF8,
-  0x1F, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF0,
-  0x1F, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xF0,
-  0x1F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xE0,
-  0x0F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xE0,
-  0x0F, 0x00, 0x00, 0x07, 0xC7, 0xE3, 0xF1, 0xC0,
-  0x07, 0x0F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0xC0,
-  0x03, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0x80,
-  0x03, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF1, 0x00,
-  0x01, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF0, 0x00,
-  0x00, 0x1F, 0xFF, 0xFF, 0xC7, 0xE3, 0xF0, 0x00,
-  0x00, 0x0F, 0xFF, 0xFF, 0xC3, 0xC1, 0xE0, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x07, 0xC0, 0x00, 0x00, 0x00,
-  0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0x00,
-  0x00, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0x00,
-  0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00,
-  0x00, 0x00, 0x7F, 0xFF, 0xFF, 0xFC, 0x00, 0x00,
-  0x00, 0x00, 0x1F, 0xFF, 0xFF, 0xF0, 0x00, 0x00,
-  0x00, 0x00, 0x07, 0xFF, 0xFF, 0x80, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x7F, 0xF8, 0x00, 0x00, 0x00,
-  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-};

Marlin/example_configurations/Felix/README.md

@@ -1,60 +0,0 @@
-# Felix 2.0/3.0 Configuration for Marlin Firmware
-
-Bringing silky smooth prints to Felix.
-
-## Build HOWTO
-
-  - Install the latest non-beta Arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software
-  - Download the Marlin firmware
-    - [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development)
-    - [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development)
-  - In both cases use the "Download Zip" button on the right.
-
-```
-cd Marlin/Marlin
-cp example_configurations/Felix/Configuration_adv.h .
-```
-
-The next step depends on your setup:
-
-### Single Extruder Configuration
-
-    cp example_configurations/Felix/Configuration.h .
-
-### Dual Extruder Configuration
-
-    cp example_configurations/Felix/DUAL/Configuration.h Configuration.h
-
-### Compile Firmware
-
-  - Start the Arduino IDE.
-  - Select Tools -> Board -> Arduino Mega 2560
-  - Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0)
-  - Open Marlin.pde or .ino
-  - Click the Verify/Compile button
-
-### Flash Firmware
-
-#### Connected directly via USB
-
-  - Click the Upload button. If all goes well the firmware is uploading
-
-#### Remote update
-
-Find the latest Arduino build:
-
-    ls -altr /tmp/
-    drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp
-
-Copy the firmware to your printer host:
-
-    scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/
-
-Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run:
-
-    avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \
-    -b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i
-
-## Acknowledgements
-
-Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead.

Marlin/example_configurations/Malyan/M150/README.md

@@ -1,3 +0,0 @@
-# Configuration for Malyan M150 hobbyking printer
-# config without automatic bed level sensor
-# or in other words, "as stock"

Marlin/example_configurations/Malyan/M150/_Bootscreen.h

@@ -1,104 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Custom Bitmap for splashscreen
- *
- * You may use one of the following tools to generate the C++ bitmap array from
- * a black and white image:
- *
- *  - http://www.marlinfw.org/tools/u8glib/converter.html
- *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
- */
-#include <avr/pgmspace.h>
-
-#define CUSTOM_BOOTSCREEN_TIMEOUT   1000
-#define CUSTOM_BOOTSCREEN_BMPWIDTH  128
-#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
-
-const unsigned char custom_start_bmp[1024] PROGMEM = {
- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x07,0x00,0x00,0x03,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x1f,0xc0,0x00,0x0f,0xe0,0x7c,0x03,0xe0,0x78,0x1c,0x07,0x81,0xe0,0xf0,0x3e,0x0e
-,0x7f,0xe0,0x00,0x3f,0xf0,0x7e,0x07,0xe0,0xfc,0x1c,0x03,0x81,0xc1,0xf8,0x3f,0x0e
-,0x7f,0xf8,0x00,0x7f,0xf0,0x7e,0x07,0xe0,0xfc,0x1c,0x03,0xc3,0xc1,0xf8,0x3f,0x0e
-,0x7b,0xfe,0x01,0xfe,0xf0,0x7f,0x0f,0xe1,0xfe,0x1c,0x01,0xc3,0x83,0xfc,0x3f,0x8e
-,0x7c,0xff,0x87,0xf9,0xf0,0x77,0x0e,0xe1,0xfe,0x1c,0x01,0xe7,0x83,0xfc,0x3b,0x8e
-,0x7f,0x7f,0xcf,0xf7,0xf0,0x77,0x9e,0xe1,0xce,0x1c,0x00,0xe7,0x03,0x9c,0x3b,0xce
-,0x7f,0x9f,0xff,0xcf,0xf0,0x73,0x9c,0xe3,0xcf,0x1c,0x00,0xff,0x07,0x9e,0x39,0xce
-,0x7f,0xe7,0xff,0x3f,0xf0,0x73,0xfc,0xe3,0x87,0x1c,0x00,0x7e,0x07,0x0e,0x39,0xee
-,0x7f,0xfb,0xfe,0xff,0xf0,0x71,0xf8,0xe3,0x87,0x1c,0x00,0x7e,0x0f,0x0f,0x38,0xee
-,0x7f,0xfc,0xf9,0xff,0xf0,0x71,0xf8,0xe7,0xff,0x9c,0x00,0x3c,0x0f,0xff,0x38,0xfe
-,0x7f,0xff,0x27,0xff,0xf0,0x70,0xf0,0xe7,0xff,0x9c,0x00,0x3c,0x0f,0xff,0x38,0x7e
-,0x7f,0xff,0xdf,0xff,0xf0,0x70,0xf0,0xef,0xff,0xdc,0x00,0x3c,0x1f,0xff,0xb8,0x7e
-,0x7f,0xdf,0xff,0xdf,0xf0,0x70,0x60,0xef,0x03,0xdf,0xf8,0x3c,0x1e,0x07,0xb8,0x3e
-,0x7f,0xc7,0xff,0x1f,0xf0,0x70,0x60,0xee,0x01,0xdf,0xf8,0x3c,0x1c,0x03,0xb8,0x3e
-,0x7f,0xc3,0xfe,0x1f,0xf0,0x70,0x00,0xee,0x01,0xdf,0xf8,0x3c,0x1c,0x03,0xb8,0x1e
-,0x7f,0xc3,0xfe,0x1f,0xf0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x7f,0xc3,0xde,0x1f,0xf0,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
-,0x7f,0xc3,0xde,0x1f,0xf0,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
-,0x7f,0xc3,0xde,0x1f,0xf0,0x7c,0x3f,0xfa,0xfb,0xff,0xff,0xff,0xfd,0x7a,0xbf,0xfe
-,0x7f,0xc3,0xde,0x1f,0xf0,0x7d,0x9f,0xfb,0xff,0xff,0xff,0xff,0xff,0x7e,0xf7,0xfe
-,0x7f,0xc3,0xde,0x1f,0xf0,0x7d,0x93,0x1a,0x8a,0x18,0xe3,0x8c,0x45,0x1a,0xa2,0xde
-,0x3f,0xc3,0xde,0x0f,0xf0,0x7c,0x2d,0xca,0xca,0xd6,0xe9,0x24,0xcd,0x6a,0xb6,0xbe
-,0x1f,0x83,0xde,0x07,0xe0,0x7d,0xa3,0x6a,0x9a,0xd6,0xe9,0x26,0x65,0x6a,0xb6,0x3e
-,0x06,0x03,0xde,0x01,0x80,0x7d,0x91,0x0a,0x8a,0xd8,0xe3,0x8c,0x45,0x1a,0xb3,0x7e
-,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xfe,0xef,0xff,0xff,0xff,0xff,0x7e
-,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xf1,0xef,0xff,0xff,0xff,0xfe,0xfe
-,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
-,0x00,0x03,0xde,0x00,0x00,0x7f,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xfe
-,0x00,0x03,0xde,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x01,0xdc,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x50,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
-
-};